UBI: Extend UBI layer debug/messaging capabilities
If there is more then one UBI device mounted, there is no way to
distinguish between messages from different UBI devices.
Add device number to all ubi layer message types.
The R/O block driver messages were replaced by pr_* since
ubi_device structure is not used by it.
Amended a bit by Artem.
Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c
index 6f27d9a..9d2e16f 100644
--- a/drivers/mtd/ubi/attach.c
+++ b/drivers/mtd/ubi/attach.c
@@ -176,6 +176,7 @@
/**
* validate_vid_hdr - check volume identifier header.
+ * @ubi: UBI device description object
* @vid_hdr: the volume identifier header to check
* @av: information about the volume this logical eraseblock belongs to
* @pnum: physical eraseblock number the VID header came from
@@ -188,7 +189,8 @@
* information in the VID header is consistent to the information in other VID
* headers of the same volume.
*/
-static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
+static int validate_vid_hdr(const struct ubi_device *ubi,
+ const struct ubi_vid_hdr *vid_hdr,
const struct ubi_ainf_volume *av, int pnum)
{
int vol_type = vid_hdr->vol_type;
@@ -206,7 +208,7 @@
*/
if (vol_id != av->vol_id) {
- ubi_err("inconsistent vol_id");
+ ubi_err(ubi, "inconsistent vol_id");
goto bad;
}
@@ -216,17 +218,17 @@
av_vol_type = UBI_VID_DYNAMIC;
if (vol_type != av_vol_type) {
- ubi_err("inconsistent vol_type");
+ ubi_err(ubi, "inconsistent vol_type");
goto bad;
}
if (used_ebs != av->used_ebs) {
- ubi_err("inconsistent used_ebs");
+ ubi_err(ubi, "inconsistent used_ebs");
goto bad;
}
if (data_pad != av->data_pad) {
- ubi_err("inconsistent data_pad");
+ ubi_err(ubi, "inconsistent data_pad");
goto bad;
}
}
@@ -234,7 +236,7 @@
return 0;
bad:
- ubi_err("inconsistent VID header at PEB %d", pnum);
+ ubi_err(ubi, "inconsistent VID header at PEB %d", pnum);
ubi_dump_vid_hdr(vid_hdr);
ubi_dump_av(av);
return -EINVAL;
@@ -336,7 +338,7 @@
* support these images anymore. Well, those images still work,
* but only if no unclean reboots happened.
*/
- ubi_err("unsupported on-flash UBI format");
+ ubi_err(ubi, "unsupported on-flash UBI format");
return -EINVAL;
}
@@ -377,7 +379,7 @@
if (err == UBI_IO_BITFLIPS)
bitflips = 1;
else {
- ubi_err("VID of PEB %d header is bad, but it was OK earlier, err %d",
+ ubi_err(ubi, "VID of PEB %d header is bad, but it was OK earlier, err %d",
pnum, err);
if (err > 0)
err = -EIO;
@@ -507,7 +509,7 @@
* logical eraseblocks because there was an unclean reboot.
*/
if (aeb->sqnum == sqnum && sqnum != 0) {
- ubi_err("two LEBs with same sequence number %llu",
+ ubi_err(ubi, "two LEBs with same sequence number %llu",
sqnum);
ubi_dump_aeb(aeb, 0);
ubi_dump_vid_hdr(vid_hdr);
@@ -527,7 +529,7 @@
* This logical eraseblock is newer than the one
* found earlier.
*/
- err = validate_vid_hdr(vid_hdr, av, pnum);
+ err = validate_vid_hdr(ubi, vid_hdr, av, pnum);
if (err)
return err;
@@ -565,7 +567,7 @@
* attaching information.
*/
- err = validate_vid_hdr(vid_hdr, av, pnum);
+ err = validate_vid_hdr(ubi, vid_hdr, av, pnum);
if (err)
return err;
@@ -668,7 +670,8 @@
* Erase counter overflow. Upgrade UBI and use 64-bit
* erase counters internally.
*/
- ubi_err("erase counter overflow at PEB %d, EC %d", pnum, ec);
+ ubi_err(ubi, "erase counter overflow at PEB %d, EC %d",
+ pnum, ec);
return -EINVAL;
}
@@ -736,7 +739,7 @@
return aeb;
}
- ubi_err("no free eraseblocks");
+ ubi_err(ubi, "no free eraseblocks");
return ERR_PTR(-ENOSPC);
}
@@ -785,9 +788,9 @@
if (ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->leb_size))
goto out_unlock;
- ubi_err("PEB %d contains corrupted VID header, and the data does not contain all 0xFF",
+ ubi_err(ubi, "PEB %d contains corrupted VID header, and the data does not contain all 0xFF",
pnum);
- ubi_err("this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection");
+ ubi_err(ubi, "this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection");
ubi_dump_vid_hdr(vid_hdr);
pr_err("hexdump of PEB %d offset %d, length %d",
pnum, ubi->leb_start, ubi->leb_size);
@@ -859,7 +862,8 @@
bitflips = 1;
break;
default:
- ubi_err("'ubi_io_read_ec_hdr()' returned unknown code %d", err);
+ ubi_err(ubi, "'ubi_io_read_ec_hdr()' returned unknown code %d",
+ err);
return -EINVAL;
}
@@ -868,7 +872,7 @@
/* Make sure UBI version is OK */
if (ech->version != UBI_VERSION) {
- ubi_err("this UBI version is %d, image version is %d",
+ ubi_err(ubi, "this UBI version is %d, image version is %d",
UBI_VERSION, (int)ech->version);
return -EINVAL;
}
@@ -882,7 +886,7 @@
* flash. Upgrade UBI and use 64-bit erase counters
* internally.
*/
- ubi_err("erase counter overflow, max is %d",
+ ubi_err(ubi, "erase counter overflow, max is %d",
UBI_MAX_ERASECOUNTER);
ubi_dump_ec_hdr(ech);
return -EINVAL;
@@ -903,7 +907,7 @@
if (!ubi->image_seq)
ubi->image_seq = image_seq;
if (image_seq && ubi->image_seq != image_seq) {
- ubi_err("bad image sequence number %d in PEB %d, expected %d",
+ ubi_err(ubi, "bad image sequence number %d in PEB %d, expected %d",
image_seq, pnum, ubi->image_seq);
ubi_dump_ec_hdr(ech);
return -EINVAL;
@@ -981,7 +985,7 @@
return err;
goto adjust_mean_ec;
default:
- ubi_err("'ubi_io_read_vid_hdr()' returned unknown code %d",
+ ubi_err(ubi, "'ubi_io_read_vid_hdr()' returned unknown code %d",
err);
return -EINVAL;
}
@@ -999,7 +1003,7 @@
case UBI_COMPAT_DELETE:
if (vol_id != UBI_FM_SB_VOLUME_ID
&& vol_id != UBI_FM_DATA_VOLUME_ID) {
- ubi_msg("\"delete\" compatible internal volume %d:%d found, will remove it",
+ ubi_msg(ubi, "\"delete\" compatible internal volume %d:%d found, will remove it",
vol_id, lnum);
}
err = add_to_list(ai, pnum, vol_id, lnum,
@@ -1009,13 +1013,13 @@
return 0;
case UBI_COMPAT_RO:
- ubi_msg("read-only compatible internal volume %d:%d found, switch to read-only mode",
+ ubi_msg(ubi, "read-only compatible internal volume %d:%d found, switch to read-only mode",
vol_id, lnum);
ubi->ro_mode = 1;
break;
case UBI_COMPAT_PRESERVE:
- ubi_msg("\"preserve\" compatible internal volume %d:%d found",
+ ubi_msg(ubi, "\"preserve\" compatible internal volume %d:%d found",
vol_id, lnum);
err = add_to_list(ai, pnum, vol_id, lnum,
ec, 0, &ai->alien);
@@ -1024,14 +1028,14 @@
return 0;
case UBI_COMPAT_REJECT:
- ubi_err("incompatible internal volume %d:%d found",
+ ubi_err(ubi, "incompatible internal volume %d:%d found",
vol_id, lnum);
return -EINVAL;
}
}
if (ec_err)
- ubi_warn("valid VID header but corrupted EC header at PEB %d",
+ ubi_warn(ubi, "valid VID header but corrupted EC header at PEB %d",
pnum);
err = ubi_add_to_av(ubi, ai, pnum, ec, vidh, bitflips);
if (err)
@@ -1075,7 +1079,7 @@
* with the flash HW or driver.
*/
if (ai->corr_peb_count) {
- ubi_err("%d PEBs are corrupted and preserved",
+ ubi_err(ubi, "%d PEBs are corrupted and preserved",
ai->corr_peb_count);
pr_err("Corrupted PEBs are:");
list_for_each_entry(aeb, &ai->corr, u.list)
@@ -1087,7 +1091,7 @@
* otherwise, only print a warning.
*/
if (ai->corr_peb_count >= max_corr) {
- ubi_err("too many corrupted PEBs, refusing");
+ ubi_err(ubi, "too many corrupted PEBs, refusing");
return -EINVAL;
}
}
@@ -1110,11 +1114,11 @@
*/
if (ai->maybe_bad_peb_count <= 2) {
ai->is_empty = 1;
- ubi_msg("empty MTD device detected");
+ ubi_msg(ubi, "empty MTD device detected");
get_random_bytes(&ubi->image_seq,
sizeof(ubi->image_seq));
} else {
- ubi_err("MTD device is not UBI-formatted and possibly contains non-UBI data - refusing it");
+ ubi_err(ubi, "MTD device is not UBI-formatted and possibly contains non-UBI data - refusing it");
return -EINVAL;
}
@@ -1248,7 +1252,7 @@
goto out_vidh;
}
- ubi_msg("scanning is finished");
+ ubi_msg(ubi, "scanning is finished");
/* Calculate mean erase counter */
if (ai->ec_count)
@@ -1515,37 +1519,37 @@
vols_found += 1;
if (ai->is_empty) {
- ubi_err("bad is_empty flag");
+ ubi_err(ubi, "bad is_empty flag");
goto bad_av;
}
if (av->vol_id < 0 || av->highest_lnum < 0 ||
av->leb_count < 0 || av->vol_type < 0 || av->used_ebs < 0 ||
av->data_pad < 0 || av->last_data_size < 0) {
- ubi_err("negative values");
+ ubi_err(ubi, "negative values");
goto bad_av;
}
if (av->vol_id >= UBI_MAX_VOLUMES &&
av->vol_id < UBI_INTERNAL_VOL_START) {
- ubi_err("bad vol_id");
+ ubi_err(ubi, "bad vol_id");
goto bad_av;
}
if (av->vol_id > ai->highest_vol_id) {
- ubi_err("highest_vol_id is %d, but vol_id %d is there",
+ ubi_err(ubi, "highest_vol_id is %d, but vol_id %d is there",
ai->highest_vol_id, av->vol_id);
goto out;
}
if (av->vol_type != UBI_DYNAMIC_VOLUME &&
av->vol_type != UBI_STATIC_VOLUME) {
- ubi_err("bad vol_type");
+ ubi_err(ubi, "bad vol_type");
goto bad_av;
}
if (av->data_pad > ubi->leb_size / 2) {
- ubi_err("bad data_pad");
+ ubi_err(ubi, "bad data_pad");
goto bad_av;
}
@@ -1557,48 +1561,48 @@
leb_count += 1;
if (aeb->pnum < 0 || aeb->ec < 0) {
- ubi_err("negative values");
+ ubi_err(ubi, "negative values");
goto bad_aeb;
}
if (aeb->ec < ai->min_ec) {
- ubi_err("bad ai->min_ec (%d), %d found",
+ ubi_err(ubi, "bad ai->min_ec (%d), %d found",
ai->min_ec, aeb->ec);
goto bad_aeb;
}
if (aeb->ec > ai->max_ec) {
- ubi_err("bad ai->max_ec (%d), %d found",
+ ubi_err(ubi, "bad ai->max_ec (%d), %d found",
ai->max_ec, aeb->ec);
goto bad_aeb;
}
if (aeb->pnum >= ubi->peb_count) {
- ubi_err("too high PEB number %d, total PEBs %d",
+ ubi_err(ubi, "too high PEB number %d, total PEBs %d",
aeb->pnum, ubi->peb_count);
goto bad_aeb;
}
if (av->vol_type == UBI_STATIC_VOLUME) {
if (aeb->lnum >= av->used_ebs) {
- ubi_err("bad lnum or used_ebs");
+ ubi_err(ubi, "bad lnum or used_ebs");
goto bad_aeb;
}
} else {
if (av->used_ebs != 0) {
- ubi_err("non-zero used_ebs");
+ ubi_err(ubi, "non-zero used_ebs");
goto bad_aeb;
}
}
if (aeb->lnum > av->highest_lnum) {
- ubi_err("incorrect highest_lnum or lnum");
+ ubi_err(ubi, "incorrect highest_lnum or lnum");
goto bad_aeb;
}
}
if (av->leb_count != leb_count) {
- ubi_err("bad leb_count, %d objects in the tree",
+ ubi_err(ubi, "bad leb_count, %d objects in the tree",
leb_count);
goto bad_av;
}
@@ -1609,13 +1613,13 @@
aeb = last_aeb;
if (aeb->lnum != av->highest_lnum) {
- ubi_err("bad highest_lnum");
+ ubi_err(ubi, "bad highest_lnum");
goto bad_aeb;
}
}
if (vols_found != ai->vols_found) {
- ubi_err("bad ai->vols_found %d, should be %d",
+ ubi_err(ubi, "bad ai->vols_found %d, should be %d",
ai->vols_found, vols_found);
goto out;
}
@@ -1632,7 +1636,8 @@
err = ubi_io_read_vid_hdr(ubi, aeb->pnum, vidh, 1);
if (err && err != UBI_IO_BITFLIPS) {
- ubi_err("VID header is not OK (%d)", err);
+ ubi_err(ubi, "VID header is not OK (%d)",
+ err);
if (err > 0)
err = -EIO;
return err;
@@ -1641,37 +1646,37 @@
vol_type = vidh->vol_type == UBI_VID_DYNAMIC ?
UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
if (av->vol_type != vol_type) {
- ubi_err("bad vol_type");
+ ubi_err(ubi, "bad vol_type");
goto bad_vid_hdr;
}
if (aeb->sqnum != be64_to_cpu(vidh->sqnum)) {
- ubi_err("bad sqnum %llu", aeb->sqnum);
+ ubi_err(ubi, "bad sqnum %llu", aeb->sqnum);
goto bad_vid_hdr;
}
if (av->vol_id != be32_to_cpu(vidh->vol_id)) {
- ubi_err("bad vol_id %d", av->vol_id);
+ ubi_err(ubi, "bad vol_id %d", av->vol_id);
goto bad_vid_hdr;
}
if (av->compat != vidh->compat) {
- ubi_err("bad compat %d", vidh->compat);
+ ubi_err(ubi, "bad compat %d", vidh->compat);
goto bad_vid_hdr;
}
if (aeb->lnum != be32_to_cpu(vidh->lnum)) {
- ubi_err("bad lnum %d", aeb->lnum);
+ ubi_err(ubi, "bad lnum %d", aeb->lnum);
goto bad_vid_hdr;
}
if (av->used_ebs != be32_to_cpu(vidh->used_ebs)) {
- ubi_err("bad used_ebs %d", av->used_ebs);
+ ubi_err(ubi, "bad used_ebs %d", av->used_ebs);
goto bad_vid_hdr;
}
if (av->data_pad != be32_to_cpu(vidh->data_pad)) {
- ubi_err("bad data_pad %d", av->data_pad);
+ ubi_err(ubi, "bad data_pad %d", av->data_pad);
goto bad_vid_hdr;
}
}
@@ -1680,12 +1685,13 @@
continue;
if (av->highest_lnum != be32_to_cpu(vidh->lnum)) {
- ubi_err("bad highest_lnum %d", av->highest_lnum);
+ ubi_err(ubi, "bad highest_lnum %d", av->highest_lnum);
goto bad_vid_hdr;
}
if (av->last_data_size != be32_to_cpu(vidh->data_size)) {
- ubi_err("bad last_data_size %d", av->last_data_size);
+ ubi_err(ubi, "bad last_data_size %d",
+ av->last_data_size);
goto bad_vid_hdr;
}
}
@@ -1726,7 +1732,7 @@
err = 0;
for (pnum = 0; pnum < ubi->peb_count; pnum++)
if (!buf[pnum]) {
- ubi_err("PEB %d is not referred", pnum);
+ ubi_err(ubi, "PEB %d is not referred", pnum);
err = 1;
}
@@ -1736,18 +1742,18 @@
return 0;
bad_aeb:
- ubi_err("bad attaching information about LEB %d", aeb->lnum);
+ ubi_err(ubi, "bad attaching information about LEB %d", aeb->lnum);
ubi_dump_aeb(aeb, 0);
ubi_dump_av(av);
goto out;
bad_av:
- ubi_err("bad attaching information about volume %d", av->vol_id);
+ ubi_err(ubi, "bad attaching information about volume %d", av->vol_id);
ubi_dump_av(av);
goto out;
bad_vid_hdr:
- ubi_err("bad attaching information about volume %d", av->vol_id);
+ ubi_err(ubi, "bad attaching information about volume %d", av->vol_id);
ubi_dump_av(av);
ubi_dump_vid_hdr(vidh);