V4L/DVB (7986): cx23885: add initial support for DViCO FusionHDTV7 Dual Express
Only one frontend is enabled right now. The second frontend can lock,
but transport doesn't work yet. The device will be supported as a
single tuner device until the second frontend is working.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 022aa39..51dedb1 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -164,12 +164,28 @@
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
+static struct s5h1409_config dvico_s5h1409_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_ON,
+ .qam_if = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING,
+ .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 5380,
.tuner_callback = cx23885_tuner_callback
};
+static struct xc5000_config dvico_xc5000_tunerconfig = {
+ .i2c_address = 0x64,
+ .if_khz = 5380,
+ .tuner_callback = cx23885_tuner_callback
+};
+
static struct tda829x_config tda829x_no_probe = {
.probe_tuner = TDA829X_DONT_PROBE,
};
@@ -453,6 +469,17 @@
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+ i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+ port->dvb.frontend = dvb_attach(s5h1409_attach,
+ &dvico_s5h1409_config,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL)
+ dvb_attach(xc5000_attach, port->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &dvico_xc5000_tunerconfig, i2c_bus);
+ break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);