phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr
The marvell 88ec048's official part number is 88e1318s. This patch renames
definitions in the driver to reflect this.
In addition, a minor bug fix has been added to write back the MSCR1 register
value properly.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index e2afdce..f0bd1a1 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -74,8 +74,8 @@
#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
-#define MII_88EC048_PHY_MSCR1_REG 16
-#define MII_88EC048_PHY_MSCR1_PAD_ODD BIT(6)
+#define MII_88E1318S_PHY_MSCR1_REG 16
+#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3
@@ -240,7 +240,7 @@
return err;
}
-static int m88ec048_config_aneg(struct phy_device *phydev)
+static int m88e1318_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
@@ -251,10 +251,10 @@
if (err < 0)
return err;
- mscr = phy_read(phydev, MII_88EC048_PHY_MSCR1_REG);
- mscr |= MII_88EC048_PHY_MSCR1_PAD_ODD;
+ mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
+ mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
- err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
+ err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr);
if (err < 0)
return err;
@@ -659,12 +659,12 @@
.driver = { .owner = THIS_MODULE },
},
{
- .phy_id = MARVELL_PHY_ID_88EC048,
+ .phy_id = MARVELL_PHY_ID_88E1318S,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .name = "Marvell 88EC048",
+ .name = "Marvell 88E1318S",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
- .config_aneg = &m88ec048_config_aneg,
+ .config_aneg = &m88e1318_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,