Merge branch 'topic/qcom' into for-linus
diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt
index e33bc1c..bfadbfd 100644
--- a/Documentation/dmaengine/provider.txt
+++ b/Documentation/dmaengine/provider.txt
@@ -395,6 +395,13 @@
when DMA_CTRL_REUSE is already set
- Terminating the channel
+ * DMA_PREP_CMD
+ - If set, the client driver tells DMA controller that passed data in DMA
+ API is command data.
+ - Interpretation of command data is DMA controller specific. It can be
+ used for issuing commands to other peripherals/register reads/register
+ writes for which the descriptor should be in different format from
+ normal data descriptors.
General Design Notes
--------------------
diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 03c4eb3..6d89fb6 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -65,6 +65,7 @@
#define DESC_FLAG_EOT BIT(14)
#define DESC_FLAG_EOB BIT(13)
#define DESC_FLAG_NWD BIT(12)
+#define DESC_FLAG_CMD BIT(11)
struct bam_async_desc {
struct virt_dma_desc vd;
@@ -645,6 +646,9 @@
unsigned int curr_offset = 0;
do {
+ if (flags & DMA_PREP_CMD)
+ desc->flags |= cpu_to_le16(DESC_FLAG_CMD);
+
desc->addr = cpu_to_le32(sg_dma_address(sg) +
curr_offset);
@@ -960,7 +964,7 @@
/* set any special flags on the last descriptor */
if (async_desc->num_desc == async_desc->xfer_len)
- desc[async_desc->xfer_len - 1].flags =
+ desc[async_desc->xfer_len - 1].flags |=
cpu_to_le16(async_desc->flags);
else
desc[async_desc->xfer_len - 1].flags |=
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 34fb6af..e366985 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -411,7 +411,40 @@
return NULL;
hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
- src, dest, len, flags);
+ src, dest, len, flags,
+ HIDMA_TRE_MEMCPY);
+
+ /* Place descriptor in prepared list */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_add_tail(&mdesc->node, &mchan->prepared);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ return &mdesc->desc;
+}
+
+static struct dma_async_tx_descriptor *
+hidma_prep_dma_memset(struct dma_chan *dmach, dma_addr_t dest, int value,
+ size_t len, unsigned long flags)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_desc *mdesc = NULL;
+ struct hidma_dev *mdma = mchan->dmadev;
+ unsigned long irqflags;
+
+ /* Get free descriptor */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ if (!list_empty(&mchan->free)) {
+ mdesc = list_first_entry(&mchan->free, struct hidma_desc, node);
+ list_del(&mdesc->node);
+ }
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ if (!mdesc)
+ return NULL;
+
+ hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
+ value, dest, len, flags,
+ HIDMA_TRE_MEMSET);
/* Place descriptor in prepared list */
spin_lock_irqsave(&mchan->lock, irqflags);
@@ -776,6 +809,7 @@
pm_runtime_get_sync(dmadev->ddev.dev);
dma_cap_set(DMA_MEMCPY, dmadev->ddev.cap_mask);
+ dma_cap_set(DMA_MEMSET, dmadev->ddev.cap_mask);
if (WARN_ON(!pdev->dev.dma_mask)) {
rc = -ENXIO;
goto dmafree;
@@ -786,6 +820,7 @@
dmadev->dev_trca = trca;
dmadev->trca_resource = trca_resource;
dmadev->ddev.device_prep_dma_memcpy = hidma_prep_dma_memcpy;
+ dmadev->ddev.device_prep_dma_memset = hidma_prep_dma_memset;
dmadev->ddev.device_alloc_chan_resources = hidma_alloc_chan_resources;
dmadev->ddev.device_free_chan_resources = hidma_free_chan_resources;
dmadev->ddev.device_tx_status = hidma_tx_status;
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 41e0aa2..5f9966e 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -28,6 +28,11 @@
#define HIDMA_TRE_DEST_LOW_IDX 4
#define HIDMA_TRE_DEST_HI_IDX 5
+enum tre_type {
+ HIDMA_TRE_MEMCPY = 3,
+ HIDMA_TRE_MEMSET = 4,
+};
+
struct hidma_tre {
atomic_t allocated; /* if this channel is allocated */
bool queued; /* flag whether this is pending */
@@ -150,7 +155,7 @@
int hidma_ll_disable(struct hidma_lldev *lldev);
int hidma_ll_enable(struct hidma_lldev *llhndl);
void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
- dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
+ dma_addr_t src, dma_addr_t dest, u32 len, u32 flags, u32 txntype);
void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi);
int hidma_ll_setup(struct hidma_lldev *lldev);
struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 1530a66..4999e26 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -105,10 +105,6 @@
HIDMA_CH_STOPPED = 4,
};
-enum tre_type {
- HIDMA_TRE_MEMCPY = 3,
-};
-
enum err_code {
HIDMA_EVRE_STATUS_COMPLETE = 1,
HIDMA_EVRE_STATUS_ERROR = 4,
@@ -174,8 +170,7 @@
tre->err_info = 0;
tre->lldev = lldev;
tre_local = &tre->tre_local[0];
- tre_local[HIDMA_TRE_CFG_IDX] = HIDMA_TRE_MEMCPY;
- tre_local[HIDMA_TRE_CFG_IDX] |= (lldev->chidx & 0xFF) << 8;
+ tre_local[HIDMA_TRE_CFG_IDX] = (lldev->chidx & 0xFF) << 8;
tre_local[HIDMA_TRE_CFG_IDX] |= BIT(16); /* set IEOB */
*tre_ch = i;
if (callback)
@@ -607,7 +602,7 @@
void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
dma_addr_t src, dma_addr_t dest, u32 len,
- u32 flags)
+ u32 flags, u32 txntype)
{
struct hidma_tre *tre;
u32 *tre_local;
@@ -626,6 +621,8 @@
}
tre_local = &tre->tre_local[0];
+ tre_local[HIDMA_TRE_CFG_IDX] &= ~GENMASK(7, 0);
+ tre_local[HIDMA_TRE_CFG_IDX] |= txntype;
tre_local[HIDMA_TRE_LEN_IDX] = len;
tre_local[HIDMA_TRE_SRC_LOW_IDX] = lower_32_bits(src);
tre_local[HIDMA_TRE_SRC_HI_IDX] = upper_32_bits(src);
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index 5a0991b..7335e2e 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -28,7 +28,7 @@
#include "hidma_mgmt.h"
-#define HIDMA_QOS_N_OFFSET 0x300
+#define HIDMA_QOS_N_OFFSET 0x700
#define HIDMA_CFG_OFFSET 0x400
#define HIDMA_MAX_BUS_REQ_LEN_OFFSET 0x41C
#define HIDMA_MAX_XACTIONS_OFFSET 0x420
@@ -227,7 +227,8 @@
goto out;
}
- if (max_write_request) {
+ if (max_write_request &&
+ (max_write_request != mgmtdev->max_write_request)) {
dev_info(&pdev->dev, "overriding max-write-burst-bytes: %d\n",
max_write_request);
mgmtdev->max_write_request = max_write_request;
@@ -240,7 +241,8 @@
dev_err(&pdev->dev, "max-read-burst-bytes missing\n");
goto out;
}
- if (max_read_request) {
+ if (max_read_request &&
+ (max_read_request != mgmtdev->max_read_request)) {
dev_info(&pdev->dev, "overriding max-read-burst-bytes: %d\n",
max_read_request);
mgmtdev->max_read_request = max_read_request;
@@ -253,7 +255,8 @@
dev_err(&pdev->dev, "max-write-transactions missing\n");
goto out;
}
- if (max_wr_xactions) {
+ if (max_wr_xactions &&
+ (max_wr_xactions != mgmtdev->max_wr_xactions)) {
dev_info(&pdev->dev, "overriding max-write-transactions: %d\n",
max_wr_xactions);
mgmtdev->max_wr_xactions = max_wr_xactions;
@@ -266,7 +269,8 @@
dev_err(&pdev->dev, "max-read-transactions missing\n");
goto out;
}
- if (max_rd_xactions) {
+ if (max_rd_xactions &&
+ (max_rd_xactions != mgmtdev->max_rd_xactions)) {
dev_info(&pdev->dev, "overriding max-read-transactions: %d\n",
max_rd_xactions);
mgmtdev->max_rd_xactions = max_rd_xactions;
@@ -354,7 +358,7 @@
struct platform_device_info pdevinfo;
struct of_phandle_args out_irq;
struct device_node *child;
- struct resource *res;
+ struct resource *res = NULL;
const __be32 *cell;
int ret = 0, size, i, num;
u64 addr, addr_size;
diff --git a/include/linux/dma/qcom_bam_dma.h b/include/linux/dma/qcom_bam_dma.h
new file mode 100644
index 0000000..077d43a
--- /dev/null
+++ b/include/linux/dma/qcom_bam_dma.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _QCOM_BAM_DMA_H
+#define _QCOM_BAM_DMA_H
+
+#include <asm/byteorder.h>
+
+/*
+ * This data type corresponds to the native Command Element
+ * supported by BAM DMA Engine.
+ *
+ * @cmd_and_addr - upper 8 bits command and lower 24 bits register address.
+ * @data - for write command: content to be written into peripheral register.
+ * for read command: dest addr to write peripheral register value.
+ * @mask - register mask.
+ * @reserved - for future usage.
+ *
+ */
+struct bam_cmd_element {
+ __le32 cmd_and_addr;
+ __le32 data;
+ __le32 mask;
+ __le32 reserved;
+};
+
+/*
+ * This enum indicates the command type in a command element
+ */
+enum bam_command_type {
+ BAM_WRITE_COMMAND = 0,
+ BAM_READ_COMMAND,
+};
+
+/*
+ * prep_bam_ce_le32 - Wrapper function to prepare a single BAM command
+ * element with the data already in le32 format.
+ *
+ * @bam_ce: bam command element
+ * @addr: target address
+ * @cmd: BAM command
+ * @data: actual data for write and dest addr for read in le32
+ */
+static inline void
+bam_prep_ce_le32(struct bam_cmd_element *bam_ce, u32 addr,
+ enum bam_command_type cmd, __le32 data)
+{
+ bam_ce->cmd_and_addr =
+ cpu_to_le32((addr & 0xffffff) | ((cmd & 0xff) << 24));
+ bam_ce->data = data;
+ bam_ce->mask = cpu_to_le32(0xffffffff);
+}
+
+/*
+ * bam_prep_ce - Wrapper function to prepare a single BAM command element
+ * with the data.
+ *
+ * @bam_ce: BAM command element
+ * @addr: target address
+ * @cmd: BAM command
+ * @data: actual data for write and dest addr for read
+ */
+static inline void
+bam_prep_ce(struct bam_cmd_element *bam_ce, u32 addr,
+ enum bam_command_type cmd, u32 data)
+{
+ bam_prep_ce_le32(bam_ce, addr, cmd, cpu_to_le32(data));
+}
+#endif
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 5336808..dd4de1d 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -186,6 +186,9 @@
* on the result of this operation
* @DMA_CTRL_REUSE: client can reuse the descriptor and submit again till
* cleared or freed
+ * @DMA_PREP_CMD: tell the driver that the data passed to DMA API is command
+ * data and the descriptor should be in different format from normal
+ * data descriptors.
*/
enum dma_ctrl_flags {
DMA_PREP_INTERRUPT = (1 << 0),
@@ -195,6 +198,7 @@
DMA_PREP_CONTINUE = (1 << 4),
DMA_PREP_FENCE = (1 << 5),
DMA_CTRL_REUSE = (1 << 6),
+ DMA_PREP_CMD = (1 << 7),
};
/**