qed: Utilize FW 8.10.3.0
The New QED firmware contains several fixes, including:
- Wrong classification of packets in 4-port devices.
- Anti-spoof interoperability with encapsulated packets.
- Tx-switching of encapsulated packets.
It also slightly improves Tx performance of the device.
In addition, this firmware contains the necessary logic for
supporting iscsi & rdma, for which we plan on pushing protocol
drivers in the imminent future.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index 1182361..2c143b3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -531,9 +531,9 @@
transceiver_data)));
transceiver_state = GET_FIELD(transceiver_state,
- PMM_TRANSCEIVER_STATE);
+ ETH_TRANSCEIVER_STATE);
- if (transceiver_state == PMM_TRANSCEIVER_STATE_PRESENT)
+ if (transceiver_state == ETH_TRANSCEIVER_STATE_PRESENT)
DP_NOTICE(p_hwfn, "Transceiver is present.\n");
else
DP_NOTICE(p_hwfn, "Transceiver is unplugged.\n");
@@ -668,14 +668,12 @@
qed_link_update(p_hwfn);
}
-int qed_mcp_set_link(struct qed_hwfn *p_hwfn,
- struct qed_ptt *p_ptt,
- bool b_up)
+int qed_mcp_set_link(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, bool b_up)
{
struct qed_mcp_link_params *params = &p_hwfn->mcp_info->link_input;
struct qed_mcp_mb_params mb_params;
union drv_union_data union_data;
- struct pmm_phy_cfg *phy_cfg;
+ struct eth_phy_cfg *phy_cfg;
int rc = 0;
u32 cmd;
@@ -685,9 +683,9 @@
cmd = b_up ? DRV_MSG_CODE_INIT_PHY : DRV_MSG_CODE_LINK_RESET;
if (!params->speed.autoneg)
phy_cfg->speed = params->speed.forced_speed;
- phy_cfg->pause |= (params->pause.autoneg) ? PMM_PAUSE_AUTONEG : 0;
- phy_cfg->pause |= (params->pause.forced_rx) ? PMM_PAUSE_RX : 0;
- phy_cfg->pause |= (params->pause.forced_tx) ? PMM_PAUSE_TX : 0;
+ phy_cfg->pause |= (params->pause.autoneg) ? ETH_PAUSE_AUTONEG : 0;
+ phy_cfg->pause |= (params->pause.forced_rx) ? ETH_PAUSE_RX : 0;
+ phy_cfg->pause |= (params->pause.forced_tx) ? ETH_PAUSE_TX : 0;
phy_cfg->adv_speed = params->speed.advertised_speeds;
phy_cfg->loopback_mode = params->loopback_mode;
@@ -773,6 +771,34 @@
return size;
}
+int qed_hw_init_first_eth(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt, u8 *p_pf)
+{
+ struct public_func shmem_info;
+ int i;
+
+ /* Find first Ethernet interface in port */
+ for (i = 0; i < NUM_OF_ENG_PFS(p_hwfn->cdev);
+ i += p_hwfn->cdev->num_ports_in_engines) {
+ qed_mcp_get_shmem_func(p_hwfn, p_ptt, &shmem_info,
+ MCP_PF_ID_BY_REL(p_hwfn, i));
+
+ if (shmem_info.config & FUNC_MF_CFG_FUNC_HIDE)
+ continue;
+
+ if ((shmem_info.config & FUNC_MF_CFG_PROTOCOL_MASK) ==
+ FUNC_MF_CFG_PROTOCOL_ETHERNET) {
+ *p_pf = (u8)i;
+ return 0;
+ }
+ }
+
+ DP_NOTICE(p_hwfn,
+ "Failed to find on port an ethernet interface in MF_SI mode\n");
+
+ return -EINVAL;
+}
+
static void qed_mcp_update_bw(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt)
{