windfarm: Convert to new-style i2c drivers
The legacy i2c binding model is going away soon, so convert the
macintosh windfarm drivers to the new model or they will break.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index b92b959..529886c 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -37,34 +37,22 @@
struct wf_lm75_sensor {
int ds1775 : 1;
int inited : 1;
- struct i2c_client i2c;
+ struct i2c_client *i2c;
struct wf_sensor sens;
};
#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
-#define i2c_to_lm75(c) container_of(c, struct wf_lm75_sensor, i2c)
-
-static int wf_lm75_attach(struct i2c_adapter *adapter);
-static int wf_lm75_detach(struct i2c_client *client);
-
-static struct i2c_driver wf_lm75_driver = {
- .driver = {
- .name = "wf_lm75",
- },
- .attach_adapter = wf_lm75_attach,
- .detach_client = wf_lm75_detach,
-};
static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
{
struct wf_lm75_sensor *lm = wf_to_lm75(sr);
s32 data;
- if (lm->i2c.adapter == NULL)
+ if (lm->i2c == NULL)
return -ENODEV;
/* Init chip if necessary */
if (!lm->inited) {
- u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(&lm->i2c, 1);
+ u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
sr->name, cfg);
@@ -73,7 +61,7 @@
* the firmware for now
*/
cfg_new = cfg & ~0x01;
- i2c_smbus_write_byte_data(&lm->i2c, 1, cfg_new);
+ i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
lm->inited = 1;
/* If we just powered it up, let's wait 200 ms */
@@ -81,7 +69,7 @@
}
/* Read temperature register */
- data = (s32)le16_to_cpu(i2c_smbus_read_word_data(&lm->i2c, 0));
+ data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
data <<= 8;
*value = data;
@@ -92,12 +80,6 @@
{
struct wf_lm75_sensor *lm = wf_to_lm75(sr);
- /* check if client is registered and detach from i2c */
- if (lm->i2c.adapter) {
- i2c_detach_client(&lm->i2c);
- lm->i2c.adapter = NULL;
- }
-
kfree(lm);
}
@@ -107,59 +89,77 @@
.owner = THIS_MODULE,
};
-static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
- u8 addr, int ds1775,
- const char *loc)
+static int wf_lm75_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct wf_lm75_sensor *lm;
int rc;
- DBG("wf_lm75: creating %s device at address 0x%02x\n",
- ds1775 ? "ds1775" : "lm75", addr);
-
lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
if (lm == NULL)
- return NULL;
+ return -ENODEV;
+
+ lm->inited = 0;
+ lm->ds1775 = id->driver_data;
+ lm->i2c = client;
+ lm->sens.name = client->dev.platform_data;
+ lm->sens.ops = &wf_lm75_ops;
+ i2c_set_clientdata(client, lm);
+
+ rc = wf_register_sensor(&lm->sens);
+ if (rc) {
+ i2c_set_clientdata(client, NULL);
+ kfree(lm);
+ }
+
+ return rc;
+}
+
+static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
+ u8 addr, int ds1775,
+ const char *loc)
+{
+ struct i2c_board_info info;
+ struct i2c_client *client;
+ char *name;
+
+ DBG("wf_lm75: creating %s device at address 0x%02x\n",
+ ds1775 ? "ds1775" : "lm75", addr);
/* Usual rant about sensor names not beeing very consistent in
* the device-tree, oh well ...
* Add more entries below as you deal with more setups
*/
if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
- lm->sens.name = "hd-temp";
+ name = "hd-temp";
else if (!strcmp(loc, "Incoming Air Temp"))
- lm->sens.name = "incoming-air-temp";
+ name = "incoming-air-temp";
else if (!strcmp(loc, "ODD Temp"))
- lm->sens.name = "optical-drive-temp";
+ name = "optical-drive-temp";
else if (!strcmp(loc, "HD Temp"))
- lm->sens.name = "hard-drive-temp";
+ name = "hard-drive-temp";
else
goto fail;
- lm->inited = 0;
- lm->sens.ops = &wf_lm75_ops;
- lm->ds1775 = ds1775;
- lm->i2c.addr = (addr >> 1) & 0x7f;
- lm->i2c.adapter = adapter;
- lm->i2c.driver = &wf_lm75_driver;
- strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = (addr >> 1) & 0x7f;
+ info.platform_data = name;
+ strlcpy(info.type, ds1775 ? "wf_ds1775" : "wf_lm75", I2C_NAME_SIZE);
- rc = i2c_attach_client(&lm->i2c);
- if (rc) {
- printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
- " err %d\n", ds1775 ? "ds1775" : "lm75",
- lm->i2c.name, rc);
+ client = i2c_new_device(adapter, &info);
+ if (client == NULL) {
+ printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
+ ds1775 ? "ds1775" : "lm75", name);
goto fail;
}
- if (wf_register_sensor(&lm->sens)) {
- i2c_detach_client(&lm->i2c);
- goto fail;
- }
-
- return lm;
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&client->detected, &client->driver->clients);
+ return client;
fail:
- kfree(lm);
return NULL;
}
@@ -202,21 +202,38 @@
return 0;
}
-static int wf_lm75_detach(struct i2c_client *client)
+static int wf_lm75_remove(struct i2c_client *client)
{
- struct wf_lm75_sensor *lm = i2c_to_lm75(client);
+ struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
/* Mark client detached */
- lm->i2c.adapter = NULL;
+ lm->i2c = NULL;
/* release sensor */
wf_unregister_sensor(&lm->sens);
+ i2c_set_clientdata(client, NULL);
return 0;
}
+static const struct i2c_device_id wf_lm75_id[] = {
+ { "wf_lm75", 0 },
+ { "wf_ds1775", 1 },
+ { }
+};
+
+static struct i2c_driver wf_lm75_driver = {
+ .driver = {
+ .name = "wf_lm75",
+ },
+ .attach_adapter = wf_lm75_attach,
+ .probe = wf_lm75_probe,
+ .remove = wf_lm75_remove,
+ .id_table = wf_lm75_id,
+};
+
static int __init wf_lm75_sensor_init(void)
{
/* Don't register on old machines that use therm_pm72 for now */