ALSA: snd-usb: re-order some quirk entries
No code change, just a cosmetic cleanup to keep entries ordered by the
device ID within a block of unique vendor IDs.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 3454780..f652b10 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -72,16 +72,6 @@
}
},
-/* Creative/Toshiba Multimedia Center SB-0500 */
-{
- USB_DEVICE(0x041e, 0x3048),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Toshiba",
- .product_name = "SB-0500",
- .ifnum = QUIRK_NO_INTERFACE
- }
-},
-
/* Creative/E-Mu devices */
{
USB_DEVICE(0x041e, 0x3010),
@@ -91,6 +81,15 @@
.ifnum = QUIRK_NO_INTERFACE
}
},
+/* Creative/Toshiba Multimedia Center SB-0500 */
+{
+ USB_DEVICE(0x041e, 0x3048),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "Toshiba",
+ .product_name = "SB-0500",
+ .ifnum = QUIRK_NO_INTERFACE
+ }
+},
{
/* E-Mu 0202 USB */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
@@ -2521,6 +2520,46 @@
}
},
{
+ USB_DEVICE(0x1235, 0x0010),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Focusrite",
+ .product_name = "Saffire 6 USB",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 4,
+ .iface = 0,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
+ .endpoint = 0x01,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC,
+ .rates = SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000,
+ .rate_min = 44100,
+ .rate_max = 48000,
+ .nr_rates = 2,
+ .rate_table = (unsigned int[]) {
+ 44100, 48000
+ }
+ }
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_MIDI_RAW_BYTES
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
+{
USB_DEVICE(0x1235, 0x0018),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "Novation",
@@ -2570,38 +2609,49 @@
}
},
{
- USB_DEVICE(0x1235, 0x0010),
- .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ /*
+ * Focusrite Scarlett 18i6
+ *
+ * Avoid mixer creation, which otherwise fails because some of
+ * the interface descriptor subtypes for interface 0 are
+ * unknown. That should be fixed or worked-around but this at
+ * least allows the device to be used successfully with a DAW
+ * and an external mixer. See comments below about other
+ * ignored interfaces.
+ */
+ USB_DEVICE(0x1235, 0x8004),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "Focusrite",
- .product_name = "Saffire 6 USB",
+ .product_name = "Scarlett 18i6",
.ifnum = QUIRK_ANY_INTERFACE,
.type = QUIRK_COMPOSITE,
- .data = (const struct snd_usb_audio_quirk[]) {
+ .data = & (const struct snd_usb_audio_quirk[]) {
{
+ /* InterfaceSubClass 1 (Control Device) */
.ifnum = 0,
- .type = QUIRK_AUDIO_FIXED_ENDPOINT,
- .data = &(const struct audioformat) {
- .formats = SNDRV_PCM_FMTBIT_S24_3LE,
- .channels = 4,
- .iface = 0,
- .altsetting = 1,
- .altset_idx = 1,
- .attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
- .endpoint = 0x01,
- .ep_attr = USB_ENDPOINT_XFER_ISOC,
- .rates = SNDRV_PCM_RATE_44100 |
- SNDRV_PCM_RATE_48000,
- .rate_min = 44100,
- .rate_max = 48000,
- .nr_rates = 2,
- .rate_table = (unsigned int[]) {
- 44100, 48000
- }
- }
+ .type = QUIRK_IGNORE_INTERFACE
},
{
.ifnum = 1,
- .type = QUIRK_MIDI_RAW_BYTES
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ /* InterfaceSubClass 1 (Control Device) */
+ .ifnum = 3,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 4,
+ .type = QUIRK_MIDI_STANDARD_INTERFACE
+ },
+ {
+ /* InterfaceSubClass 1 (Device Firmware Update) */
+ .ifnum = 5,
+ .type = QUIRK_IGNORE_INTERFACE
},
{
.ifnum = -1
@@ -2711,20 +2761,6 @@
}
},
{
- USB_DEVICE_VENDOR_SPEC(0x2040, 0x7240),
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
- USB_DEVICE_ID_MATCH_INT_CLASS |
- USB_DEVICE_ID_MATCH_INT_SUBCLASS,
- .bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
- .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
- .vendor_name = "Hauppauge",
- .product_name = "HVR-850",
- .ifnum = QUIRK_ANY_INTERFACE,
- .type = QUIRK_AUDIO_ALIGN_TRANSFER,
- }
-},
-{
USB_DEVICE_VENDOR_SPEC(0x2040, 0x7210),
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
USB_DEVICE_ID_MATCH_INT_CLASS |
@@ -2795,6 +2831,20 @@
}
},
{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7240),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-850",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+{
USB_DEVICE_VENDOR_SPEC(0x2040, 0x7280),
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
USB_DEVICE_ID_MATCH_INT_CLASS |
@@ -3094,58 +3144,6 @@
{
/*
- * Focusrite Scarlett 18i6
- *
- * Avoid mixer creation, which otherwise fails because some of
- * the interface descriptor subtypes for interface 0 are
- * unknown. That should be fixed or worked-around but this at
- * least allows the device to be used successfully with a DAW
- * and an external mixer. See comments below about other
- * ignored interfaces.
- */
- USB_DEVICE(0x1235, 0x8004),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Focusrite",
- .product_name = "Scarlett 18i6",
- .ifnum = QUIRK_ANY_INTERFACE,
- .type = QUIRK_COMPOSITE,
- .data = & (const struct snd_usb_audio_quirk[]) {
- {
- /* InterfaceSubClass 1 (Control Device) */
- .ifnum = 0,
- .type = QUIRK_IGNORE_INTERFACE
- },
- {
- .ifnum = 1,
- .type = QUIRK_AUDIO_STANDARD_INTERFACE
- },
- {
- .ifnum = 2,
- .type = QUIRK_AUDIO_STANDARD_INTERFACE
- },
- {
- /* InterfaceSubClass 1 (Control Device) */
- .ifnum = 3,
- .type = QUIRK_IGNORE_INTERFACE
- },
- {
- .ifnum = 4,
- .type = QUIRK_MIDI_STANDARD_INTERFACE
- },
- {
- /* InterfaceSubClass 1 (Device Firmware Update) */
- .ifnum = 5,
- .type = QUIRK_IGNORE_INTERFACE
- },
- {
- .ifnum = -1
- }
- }
- }
-},
-
-{
- /*
* Some USB MIDI devices don't have an audio control interface,
* so we have to grab MIDI streaming interfaces here.
*/