Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into rmobile-fixes-for-linus
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index eff8a96..9245f21 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -30,6 +30,7 @@
#include <linux/serial_sci.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
@@ -159,19 +160,12 @@
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device mmc_device = {
@@ -321,12 +315,11 @@
},
};
-#define DSI0PHYCR 0xe615006c
static int sh_mipi_set_dot_clock(struct platform_device *pdev,
void __iomem *base,
int enable)
{
- struct clk *pck;
+ struct clk *pck, *phy;
int ret;
pck = clk_get(&pdev->dev, "dsip_clk");
@@ -335,18 +328,27 @@
goto sh_mipi_set_dot_clock_pck_err;
}
+ phy = clk_get(&pdev->dev, "dsiphy_clk");
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ goto sh_mipi_set_dot_clock_phy_err;
+ }
+
if (enable) {
clk_set_rate(pck, clk_round_rate(pck, 24000000));
- __raw_writel(0x2a809010, DSI0PHYCR);
+ clk_set_rate(phy, clk_round_rate(pck, 510000000));
clk_enable(pck);
+ clk_enable(phy);
} else {
clk_disable(pck);
+ clk_disable(phy);
}
ret = 0;
+ clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
clk_put(pck);
-
sh_mipi_set_dot_clock_pck_err:
return ret;
}
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index aab0a34..eeb4d96 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -295,15 +295,6 @@
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +302,8 @@
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 857ceee..c8e7ca2 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -143,11 +143,10 @@
static struct gpio_keys_platform_data gpio_key_info = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
- .poll_interval = 250, /* polled for now */
};
static struct platform_device gpio_keys_device = {
- .name = "gpio-keys-polled", /* polled for now */
+ .name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &gpio_key_info,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd..a281324 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,7 +43,6 @@
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
@@ -145,11 +144,6 @@
* 1-2 short | VBUS 5V | Host
* open | external VBUS | Function
*
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD Host
- * CONFIG_USB_RENESAS_USBHS Function
- *
* CAUTION
*
* renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
* because Touchscreen is using IRQ7-PORT40.
* It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
*/
/*
@@ -208,6 +193,16 @@
*/
/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
+/*
* FIXME !!
*
* gpio_no_direction
@@ -676,51 +671,16 @@
* Use J30 to select between Host and Function. This setting
* can however not be detected by software. Hotplug of USBHS1
* is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ * - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ * - J30 "open"
+ * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ * - add .get_vbus = usbhs_get_vbus in usbhs1_private
*/
#define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
- if (!power) /* only power-on is supported for now */
- return;
-
- /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
- __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
- .on_chip = 1,
- .port_power = usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
- [0] = {
- .name = "USBHS1",
- .start = 0xe68b0000,
- .end = 0xe68b00e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb1_host_device = {
- .name = "r8a66597_hcd",
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_host_data,
- },
- .num_resources = ARRAY_SIZE(usb1_host_resources),
- .resource = usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
@@ -776,7 +736,7 @@
static int usbhs1_get_id(struct platform_device *pdev)
{
- return USBHS_GADGET;
+ return USBHS_HOST;
}
static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +767,6 @@
.hardware_exit = usbhs1_hardware_exit,
.get_id = usbhs1_get_id,
.phy_reset = usbhs_phy_reset,
- .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
@@ -1184,15 +1143,6 @@
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1150,8 @@
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
@@ -1311,7 +1262,6 @@
&nor_flash_device,
&smc911x_device,
&lcdc_device,
- &usb1_host_device,
&usbhs1_device,
&usbhs0_device,
&leds_device,
@@ -1473,9 +1423,6 @@
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
- /* USB phy tweak to make the r8a66597_hcd host driver work */
- __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
-
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index afbead6..7727cca 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -365,6 +365,114 @@
dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
};
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+
+ /* FIXME */
+ if (!(value & 0x000B8000))
+ return clk->parent->rate;
+
+ value &= 0x3f;
+ value += 1;
+
+ if ((value < 12) ||
+ (value > 33)) {
+ pr_err("DSIPHY has wrong value (%d)", value);
+ return 0;
+ }
+
+ return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+ value &= ~0x000B8000;
+
+ __raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+ u32 value;
+ int multi;
+
+ value = __raw_readl(clk->mapping->base);
+ multi = (value & 0x3f) + 1;
+
+ if ((multi < 12) || (multi > 33))
+ return -EIO;
+
+ __raw_writel(value | 0x000B8000, clk->mapping->base);
+
+ return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 value;
+ int idx;
+
+ idx = rate / clk->parent->rate;
+ if ((idx < 12) || (idx > 33))
+ return -EINVAL;
+
+ idx += -1;
+
+ value = __raw_readl(clk->mapping->base);
+ value = (value & ~0x3f) + idx;
+
+ __raw_writel(value, clk->mapping->base);
+
+ return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+ .recalc = dsiphy_recalc,
+ .round_rate = dsiphy_round_rate,
+ .set_rate = dsiphy_set_rate,
+ .enable = dsiphy_enable,
+ .disable = dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+ .phys = DSI0PHYCR,
+ .len = 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+ .phys = DSI1PHYCR,
+ .len = 4,
+};
+
+static struct clk dsi0phy_clk = {
+ .ops = &dsiphy_clk_ops,
+ .parent = &div6_clks[DIV6_DSI0P], /* late install */
+ .mapping = &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+ .ops = &dsiphy_clk_ops,
+ .parent = &div6_clks[DIV6_DSI1P], /* late install */
+ .mapping = &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+ &dsi0phy_clk,
+ &dsi1phy_clk,
+};
+
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
@@ -429,6 +537,8 @@
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,6 +614,9 @@
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+ ret = clk_register(late_main_clks[k]);
+
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 881d515..cad5757 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -515,8 +515,8 @@
SHDMA_SLAVE_MMCIF_RX,
};
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
#endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 1eda6b0..9857595 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
@@ -445,6 +446,7 @@
setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+ WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
handle_level_irq, "level");
set_irq_flags(n, IRQF_VALID); /* yuck */
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 1bd6585a..336093f 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <mach/irqs.h>
#include <mach/sh7372.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@
{ },
};
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+ PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
static struct pinmux_info sh7372_pinmux_info = {
.name = "sh7372_pfc",
.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@
.gpio_data = pinmux_data,
.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+ .gpio_irq = pinmux_irqs,
+ .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
};
void sh7372_pinmux_init(void)