MN10300: And Panasonic AM34 subarch and implement SMP
Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for
MN10300. Also implement support for the MN2WS0060 processor and the ASB2364
evaluation board which are AM34 based.
Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h
index 7d8080b..ca3e205 100644
--- a/arch/mn10300/include/asm/exceptions.h
+++ b/arch/mn10300/include/asm/exceptions.h
@@ -114,6 +114,8 @@
extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
+#define NUM2EXCEP_IRQ_LEVEL(num) (EXCEP_IRQ_LEVEL0 + (num) * 8)
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_EXCEPTIONS_H */
diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc
index 5b1949b..406060e 100644
--- a/arch/mn10300/include/asm/frame.inc
+++ b/arch/mn10300/include/asm/frame.inc
@@ -18,6 +18,9 @@
#ifndef __ASM_OFFSETS_H__
#include <asm/asm-offsets.h>
#endif
+#ifdef CONFIG_SMP
+#include <proc/smp-regs.h>
+#endif
#define pi break
@@ -37,9 +40,25 @@
movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
mov sp,fp # FRAME pointer in A3
add -12,sp # allow for calls to be made
+#ifdef CONFIG_SMP
+#ifdef CONFIG_PREEMPT /* FIXME */
+ mov epsw,d2
+ and ~EPSW_IE,epsw
+#endif
+ mov (CPUID),a0
+ add a0,a0
+ add a0,a0
+ mov (___frame,a0),a1
+ mov a1,(REG_NEXT,fp)
+ mov fp,(___frame,a0)
+#ifdef CONFIG_PREEMPT /* FIXME */
+ mov d2,epsw
+#endif
+#else /* CONFIG_SMP */
mov (__frame),a1
mov a1,(REG_NEXT,fp)
mov fp,(__frame)
+#endif /* CONFIG_SMP */
and ~EPSW_FE,epsw # disable the FPU inside the kernel
@@ -57,10 +76,27 @@
.macro RESTORE_ALL
# peel back the stack to the calling frame
# - this permits execve() to discard extra frames due to kernel syscalls
+#ifdef CONFIG_SMP
+#ifdef CONFIG_PREEMPT /* FIXME */
+ mov epsw,d2
+ and ~EPSW_IE,epsw
+#endif
+ mov (CPUID),a0
+ add a0,a0
+ add a0,a0
+ mov (___frame,a0),fp
+ mov fp,sp
+ mov (REG_NEXT,fp),d0 # userspace has regs->next == 0
+ mov d0,(___frame,a0)
+#ifdef CONFIG_PREEMPT /* FIXME */
+ mov d2,epsw
+#endif
+#else /* CONFIG_SMP */
mov (__frame),fp
mov fp,sp
mov (REG_NEXT,fp),d0 # userspace has regs->next == 0
mov d0,(__frame)
+#endif /* CONFIG_SMP */
#ifndef CONFIG_MN10300_USING_JTAG
mov (REG_EPSW,fp),d0
diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h
index 7bd9b7c..0000d65 100644
--- a/arch/mn10300/include/asm/hardirq.h
+++ b/arch/mn10300/include/asm/hardirq.h
@@ -19,8 +19,10 @@
/* assembly code in softirq.h is sensitive to the offsets of these fields */
typedef struct {
unsigned int __softirq_pending;
+#ifdef CONFIG_MN10300_WD_TIMER
unsigned int __nmi_count; /* arch dependent */
unsigned int __irq_count; /* arch dependent */
+#endif
} ____cacheline_aligned irq_cpustat_t;
#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h
index ba544c7..585b708 100644
--- a/arch/mn10300/include/asm/intctl-regs.h
+++ b/arch/mn10300/include/asm/intctl-regs.h
@@ -15,24 +15,19 @@
#ifdef __KERNEL__
-/* interrupt controller registers */
-#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */
+/*
+ * Interrupt controller registers
+ * - Registers 64-191 are at addresses offset from the main array
+ */
+#define GxICR(X) \
+ __SYSREG(0xd4000000 + (X) * 4 + \
+ (((X) >= 64) && ((X) < 192)) * 0xf00, u16)
-#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */
-#define IAGR_GN 0x00fc /* group number register
- * (documentation _has_ to be wrong)
- */
+#define GxICR_u8(X) \
+ __SYSREG(0xd4000000 + (X) * 4 + \
+ (((X) >= 64) && ((X) < 192)) * 0xf00, u8)
-#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */
-#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
-
-#define SET_XIRQ_TRIGGER(X,Y) \
-do { \
- u16 x = EXTMD; \
- x &= ~(3 << ((X) * 2)); \
- x |= ((Y) & 3) << ((X) * 2); \
- EXTMD = x; \
-} while (0)
+#include <proc/intctl-regs.h>
#define XIRQ_TRIGGER_LOWLEVEL 0
#define XIRQ_TRIGGER_HILEVEL 1
@@ -59,10 +54,18 @@
#define GxICR_LEVEL_5 0x5000 /* - level 5 */
#define GxICR_LEVEL_6 0x6000 /* - level 6 */
#define GxICR_LEVEL_SHIFT 12
+#define GxICR_NMI 0x8000 /* nmi request flag */
+
+#define NUM2GxICR_LEVEL(num) ((num) << GxICR_LEVEL_SHIFT)
#ifndef __ASSEMBLY__
extern void set_intr_level(int irq, u16 level);
-extern void set_intr_postackable(int irq);
+extern void mn10300_intc_set_level(unsigned int irq, unsigned int level);
+extern void mn10300_intc_clear(unsigned int irq);
+extern void mn10300_intc_set(unsigned int irq);
+extern void mn10300_intc_enable(unsigned int irq);
+extern void mn10300_intc_disable(unsigned int irq);
+extern void mn10300_set_lateack_irq_type(int irq);
#endif
/* external interrupts */
diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h
index 25c045d..b7b8e17 100644
--- a/arch/mn10300/include/asm/irq.h
+++ b/arch/mn10300/include/asm/irq.h
@@ -22,7 +22,11 @@
#define NO_IRQ INT_MAX
/* hardware irq numbers */
+#ifdef CONFIG_SMP
+#define NR_IRQS GxICR_NUM_EXT_IRQS
+#else
#define NR_IRQS GxICR_NUM_IRQS
+#endif
/* external hardware irq numbers */
#define NR_XIRQS GxICR_NUM_XIRQS
diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h
index b3ab207..7a7ae12 100644
--- a/arch/mn10300/include/asm/irqflags.h
+++ b/arch/mn10300/include/asm/irqflags.h
@@ -13,6 +13,9 @@
#define _ASM_IRQFLAGS_H
#include <asm/cpu-regs.h>
+#ifndef __ASSEMBLY__
+#include <linux/smp.h>
+#endif
/*
* interrupt control
@@ -60,11 +63,12 @@
/*
* we make sure arch_irq_enable() doesn't cause priority inversion
*/
-extern unsigned long __mn10300_irq_enabled_epsw;
+extern unsigned long __mn10300_irq_enabled_epsw[];
static inline void arch_local_irq_enable(void)
{
unsigned long tmp;
+ int cpu = raw_smp_processor_id();
asm volatile(
" mov epsw,%0 \n"
@@ -72,8 +76,8 @@
" or %2,%0 \n"
" mov %0,epsw \n"
: "=&d"(tmp)
- : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw)
- : "memory");
+ : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu])
+ : "memory", "cc");
}
static inline void arch_local_irq_restore(unsigned long flags)
@@ -105,6 +109,9 @@
*/
static inline void arch_safe_halt(void)
{
+#ifdef CONFIG_SMP
+ arch_local_irq_enable();
+#else
asm volatile(
" or %0,epsw \n"
" nop \n"
@@ -113,8 +120,21 @@
:
: "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)
: "cc");
+#endif
}
+#define __sleep_cpu() \
+do { \
+ asm volatile( \
+ " bset %1,(%0)\n" \
+ "1: btst %1,(%0)\n" \
+ " bne 1b\n" \
+ : \
+ : "i"(&CPUM), "i"(CPUM_SLEEP) \
+ : "cc" \
+ ); \
+} while (0)
+
static inline void arch_local_cli(void)
{
asm volatile(
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
index 05dda64..cd568bf 100644
--- a/arch/mn10300/include/asm/pgtable.h
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -90,9 +90,15 @@
* The vmalloc() routines also leaves a hole of 4kB between each vmalloced
* area to catch addressing errors.
*/
+#ifndef __ASSEMBLY__
+#define VMALLOC_OFFSET (8UL * 1024 * 1024)
+#define VMALLOC_START (0x70000000UL)
+#define VMALLOC_END (0x7C000000UL)
+#else
#define VMALLOC_OFFSET (8 * 1024 * 1024)
#define VMALLOC_START (0x70000000)
#define VMALLOC_END (0x7C000000)
+#endif
#ifndef __ASSEMBLY__
extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
@@ -329,11 +335,7 @@
return 1;
}
-/*
- * Bits 0 and 1 are taken, split up the 29 bits of offset
- * into this range:
- */
-#define PTE_FILE_MAX_BITS 29
+#define PTE_FILE_MAX_BITS 30
#define pte_to_pgoff(pte) (pte_val(pte) >> 2)
#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE)
@@ -379,8 +381,13 @@
* Macro to mark a page protection value as "uncacheable". On processors which
* do not support it, this is a no-op.
*/
-#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE)
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHE)
+/*
+ * Macro to mark a page protection value as "Write-Through".
+ * On processors which do not support it, this is a no-op.
+ */
+#define pgprot_through(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE_WT)
/*
* Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h
index 0032fc7..75c422a 100644
--- a/arch/mn10300/include/asm/processor.h
+++ b/arch/mn10300/include/asm/processor.h
@@ -33,6 +33,8 @@
__pc; \
})
+extern void get_mem_info(unsigned long *mem_base, unsigned long *mem_size);
+
extern void show_registers(struct pt_regs *regs);
/*
@@ -43,17 +45,22 @@
struct mn10300_cpuinfo {
int type;
- unsigned long loops_per_sec;
+ unsigned long loops_per_jiffy;
char hard_math;
- unsigned long *pgd_quick;
- unsigned long *pte_quick;
- unsigned long pgtable_cache_sz;
};
extern struct mn10300_cpuinfo boot_cpu_data;
+#ifdef CONFIG_SMP
+#if CONFIG_NR_CPUS < 2 || CONFIG_NR_CPUS > 8
+# error Sorry, NR_CPUS should be 2 to 8
+#endif
+extern struct mn10300_cpuinfo cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else /* CONFIG_SMP */
#define cpu_data &boot_cpu_data
#define current_cpu_data boot_cpu_data
+#endif /* CONFIG_SMP */
extern void identify_cpu(struct mn10300_cpuinfo *);
extern void print_cpu_info(struct mn10300_cpuinfo *);
@@ -92,21 +99,21 @@
unsigned long a3; /* kernel FP */
unsigned long wchan;
unsigned long usp;
- struct pt_regs *__frame;
+ struct pt_regs *frame;
unsigned long fpu_flags;
#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */
#define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */
struct fpu_state_struct fpu_state;
};
-#define INIT_THREAD \
-{ \
- .uregs = init_uregs, \
- .pc = 0, \
- .sp = 0, \
- .a3 = 0, \
- .wchan = 0, \
- .__frame = NULL, \
+#define INIT_THREAD \
+{ \
+ .uregs = init_uregs, \
+ .pc = 0, \
+ .sp = 0, \
+ .a3 = 0, \
+ .wchan = 0, \
+ .frame = NULL, \
}
#define INIT_MMAP \
@@ -118,6 +125,19 @@
* - need to discard the frame stacked by the kernel thread invoking the execve
* syscall (see RESTORE_ALL macro)
*/
+#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT) /* FIXME */
+#define start_thread(regs, new_pc, new_sp) do { \
+ int cpu; \
+ preempt_disable(); \
+ cpu = CPUID; \
+ set_fs(USER_DS); \
+ ___frame[cpu] = current->thread.uregs; \
+ ___frame[cpu]->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;\
+ ___frame[cpu]->pc = new_pc; \
+ ___frame[cpu]->sp = new_sp; \
+ preempt_enable(); \
+} while (0)
+#else /* CONFIG_SMP && CONFIG_PREEMPT */
#define start_thread(regs, new_pc, new_sp) do { \
set_fs(USER_DS); \
__frame = current->thread.uregs; \
@@ -125,6 +145,7 @@
__frame->pc = new_pc; \
__frame->sp = new_sp; \
} while (0)
+#endif /* CONFIG_SMP && CONFIG_PREEMPT */
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 7c2e911..c2b77bd 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -40,7 +40,6 @@
#define PT_PC 26
#define NR_PTREGS 27
-#ifndef __ASSEMBLY__
/*
* This defines the way registers are stored in the event of an exception
* - the strange order is due to the MOVM instruction
@@ -75,7 +74,6 @@
unsigned long epsw;
unsigned long pc;
};
-#endif
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
#define PTRACE_GETREGS 12
@@ -86,12 +84,13 @@
/* options set using PTRACE_SETOPTIONS */
#define PTRACE_O_TRACESYSGOOD 0x00000001
-#if defined(__KERNEL__)
+#ifdef __KERNEL__
+#ifdef CONFIG_SMP
+extern struct pt_regs *___frame[]; /* current frame pointer */
+#else
extern struct pt_regs *__frame; /* current frame pointer */
-
-#if !defined(__ASSEMBLY__)
-struct task_struct;
+#endif
#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
#define instruction_pointer(regs) ((regs)->pc)
@@ -100,9 +99,7 @@
#define arch_has_single_step() (1)
-#endif /* !__ASSEMBLY */
-
#define profile_pc(regs) ((regs)->pc)
-#endif /* __KERNEL__ */
+#endif /* __KERNEL__ */
#endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h
index 174523d..10c7502 100644
--- a/arch/mn10300/include/asm/reset-regs.h
+++ b/arch/mn10300/include/asm/reset-regs.h
@@ -50,7 +50,7 @@
RSTCTR |= RSTCTR_CHIPRST;
}
-extern unsigned int watchdog_alert_counter;
+extern unsigned int watchdog_alert_counter[];
extern void watchdog_go(void);
extern asmlinkage void watchdog_handler(void);
diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h
index c295194..6c14bb1 100644
--- a/arch/mn10300/include/asm/rtc.h
+++ b/arch/mn10300/include/asm/rtc.h
@@ -15,25 +15,14 @@
#include <linux/init.h>
-extern void check_rtc_time(void);
extern void __init calibrate_clock(void);
-extern unsigned long __init get_initial_rtc_time(void);
#else /* !CONFIG_MN10300_RTC */
-static inline void check_rtc_time(void)
-{
-}
-
static inline void calibrate_clock(void)
{
}
-static inline unsigned long get_initial_rtc_time(void)
-{
- return 0;
-}
-
#endif /* !CONFIG_MN10300_RTC */
#include <asm-generic/rtc.h>
diff --git a/arch/mn10300/include/asm/rwlock.h b/arch/mn10300/include/asm/rwlock.h
new file mode 100644
index 0000000..6d594d4
--- /dev/null
+++ b/arch/mn10300/include/asm/rwlock.h
@@ -0,0 +1,125 @@
+/*
+ * Helpers used by both rw spinlocks and rw semaphores.
+ *
+ * Based in part on code from semaphore.h and
+ * spinlock.h Copyright 1996 Linus Torvalds.
+ *
+ * Copyright 1999 Red Hat, Inc.
+ *
+ * Written by Benjamin LaHaise.
+ *
+ * Modified by Matsushita Electric Industrial Co., Ltd.
+ * Modifications:
+ * 13-Nov-2006 MEI Temporarily delete lock functions for SMP support.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+#ifndef _ASM_RWLOCK_H
+#define _ASM_RWLOCK_H
+
+#define RW_LOCK_BIAS 0x01000000
+
+#ifndef CONFIG_SMP
+
+typedef struct { unsigned long a[100]; } __dummy_lock_t;
+#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock))
+
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+#define __build_read_lock_ptr(rw, helper) \
+ do { \
+ asm volatile( \
+ " mov (%0),d3 \n" \
+ " sub 1,d3 \n" \
+ " mov d3,(%0) \n" \
+ " blt 1f \n" \
+ " bra 2f \n" \
+ "1: jmp 3f \n" \
+ "2: \n" \
+ " .section .text.lock,\"ax\" \n" \
+ "3: call "helper"[],0 \n" \
+ " jmp 2b \n" \
+ " .previous" \
+ : \
+ : "d" (rw) \
+ : "memory", "d3", "cc"); \
+ } while (0)
+
+#define __build_read_lock_const(rw, helper) \
+ do { \
+ asm volatile( \
+ " mov (%0),d3 \n" \
+ " sub 1,d3 \n" \
+ " mov d3,(%0) \n" \
+ " blt 1f \n" \
+ " bra 2f \n" \
+ "1: jmp 3f \n" \
+ "2: \n" \
+ " .section .text.lock,\"ax\" \n" \
+ "3: call "helper"[],0 \n" \
+ " jmp 2b \n" \
+ " .previous" \
+ : \
+ : "d" (rw) \
+ : "memory", "d3", "cc"); \
+ } while (0)
+
+#define __build_read_lock(rw, helper) \
+ do { \
+ if (__builtin_constant_p(rw)) \
+ __build_read_lock_const(rw, helper); \
+ else \
+ __build_read_lock_ptr(rw, helper); \
+ } while (0)
+
+#define __build_write_lock_ptr(rw, helper) \
+ do { \
+ asm volatile( \
+ " mov (%0),d3 \n" \
+ " sub 1,d3 \n" \
+ " mov d3,(%0) \n" \
+ " blt 1f \n" \
+ " bra 2f \n" \
+ "1: jmp 3f \n" \
+ "2: \n" \
+ " .section .text.lock,\"ax\" \n" \
+ "3: call "helper"[],0 \n" \
+ " jmp 2b \n" \
+ " .previous" \
+ : \
+ : "d" (rw) \
+ : "memory", "d3", "cc"); \
+ } while (0)
+
+#define __build_write_lock_const(rw, helper) \
+ do { \
+ asm volatile( \
+ " mov (%0),d3 \n" \
+ " sub 1,d3 \n" \
+ " mov d3,(%0) \n" \
+ " blt 1f \n" \
+ " bra 2f \n" \
+ "1: jmp 3f \n" \
+ "2: \n" \
+ " .section .text.lock,\"ax\" \n" \
+ "3: call "helper"[],0 \n" \
+ " jmp 2b \n" \
+ " .previous" \
+ : \
+ : "d" (rw) \
+ : "memory", "d3", "cc"); \
+ } while (0)
+
+#define __build_write_lock(rw, helper) \
+ do { \
+ if (__builtin_constant_p(rw)) \
+ __build_write_lock_const(rw, helper); \
+ else \
+ __build_write_lock_ptr(rw, helper); \
+ } while (0)
+
+#endif /* CONFIG_SMP */
+#endif /* _ASM_RWLOCK_H */
diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h
index 6498469..8320cda 100644
--- a/arch/mn10300/include/asm/serial-regs.h
+++ b/arch/mn10300/include/asm/serial-regs.h
@@ -20,18 +20,25 @@
/* serial port 0 */
#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */
#define SC01CTR_CK 0x0007 /* clock source select */
-#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
-#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
-#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
-#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
-#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */
-#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */
-#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
-#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */
+#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
+#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
+#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
+#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */
+#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
+#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
+#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 1 only) */
+#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
+#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
+#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */
+#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM12UFLOW_8 0x0000 /* - 1/8 timer 12 underflow (serial port 1 only) */
+#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
#define SC01CTR_STB 0x0008 /* stop bit select */
#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */
#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */
@@ -100,11 +107,23 @@
/* serial port 2 */
#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */
+#ifdef CONFIG_AM33_2
#define SC2CTR_CK 0x0003 /* clock source select */
#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */
#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */
#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */
#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */
+#else /* CONFIG_AM33_2 */
+#define SC2CTR_CK 0x0007 /* clock source select */
+#define SC2CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow */
+#define SC2CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
+#define SC2CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
+#define SC2CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow */
+#define SC2CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow */
+#define SC2CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow */
+#define SC2CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
+#define SC2CTR_CK_EXTERN 0x0007 /* - external closk */
+#endif /* CONFIG_AM33_2 */
#define SC2CTR_STB 0x0008 /* stop bit select */
#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */
#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */
@@ -134,9 +153,14 @@
#define SC2ICR_RES 0x04 /* receive error select */
#define SC2ICR_RI 0x01 /* receive interrupt cause */
-#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
-#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
-#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */
+#define SC2TXB __SYSREG(0xd4002028, u8) /* transmit buffer reg */
+#define SC2RXB __SYSREG(0xd4002029, u8) /* receive buffer reg */
+
+#ifdef CONFIG_AM33_2
+#define SC2STR __SYSREG(0xd400202c, u8) /* status reg */
+#else /* CONFIG_AM33_2 */
+#define SC2STR __SYSREG(0xd400202c, u16) /* status reg */
+#endif /* CONFIG_AM33_2 */
#define SC2STR_OEF 0x0001 /* overrun error found */
#define SC2STR_PEF 0x0002 /* parity error found */
#define SC2STR_FEF 0x0004 /* framing error found */
@@ -146,10 +170,17 @@
#define SC2STR_RXF 0x0040 /* receive status */
#define SC2STR_TXF 0x0080 /* transmit status */
+#ifdef CONFIG_AM33_2
#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */
+#endif
+#ifdef CONFIG_AM33_2
#define SC2RXIRQ 24 /* serial 2 Receive IRQ */
#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */
+#else /* CONFIG_AM33_2 */
+#define SC2RXIRQ 68 /* serial 2 Receive IRQ */
+#define SC2TXIRQ 69 /* serial 2 Transmit IRQ */
+#endif /* CONFIG_AM33_2 */
#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
index a29445c..23a7992 100644
--- a/arch/mn10300/include/asm/serial.h
+++ b/arch/mn10300/include/asm/serial.h
@@ -9,10 +9,8 @@
* 2 of the Licence, or (at your option) any later version.
*/
-/*
- * The ASB2305 has an 18.432 MHz clock the UART
- */
-#define BASE_BAUD (18432000 / 16)
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_DETECT_IRQ
@@ -34,3 +32,5 @@
#endif
#include <unit/serial.h>
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h
index 4eb8c61..b8585b4 100644
--- a/arch/mn10300/include/asm/smp.h
+++ b/arch/mn10300/include/asm/smp.h
@@ -3,6 +3,16 @@
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
+ * Modified by Matsushita Electric Industrial Co., Ltd.
+ * Modifications:
+ * 13-Nov-2006 MEI Define IPI-IRQ number and add inline/macro function
+ * for SMP support.
+ * 22-Jan-2007 MEI Add the define related to SMP_BOOT_IRQ.
+ * 23-Feb-2007 MEI Add the define related to SMP icahce invalidate.
+ * 23-Jun-2008 MEI Delete INTC_IPI.
+ * 22-Jul-2008 MEI Add smp_nmi_call_function and related defines.
+ * 04-Aug-2008 MEI Delete USE_DOIRQ_CACHE_IPI.
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
@@ -11,8 +21,98 @@
#ifndef _ASM_SMP_H
#define _ASM_SMP_H
-#ifdef CONFIG_SMP
-#error SMP not yet supported for MN10300
+#ifndef __ASSEMBLY__
+#include <linux/threads.h>
+#include <linux/cpumask.h>
#endif
+#ifdef CONFIG_SMP
+#include <proc/smp-regs.h>
+
+#define RESCHEDULE_IPI 63
+#define CALL_FUNC_SINGLE_IPI 192
+#define LOCAL_TIMER_IPI 193
+#define FLUSH_CACHE_IPI 194
+#define CALL_FUNCTION_NMI_IPI 195
+#define GDB_NMI_IPI 196
+
+#define SMP_BOOT_IRQ 195
+
+#define RESCHEDULE_GxICR_LV GxICR_LEVEL_6
+#define CALL_FUNCTION_GxICR_LV GxICR_LEVEL_4
+#define LOCAL_TIMER_GxICR_LV GxICR_LEVEL_4
+#define FLUSH_CACHE_GxICR_LV GxICR_LEVEL_0
+#define SMP_BOOT_GxICR_LV GxICR_LEVEL_0
+
+#define TIME_OUT_COUNT_BOOT_IPI 100
+#define DELAY_TIME_BOOT_IPI 75000
+
+
+#ifndef __ASSEMBLY__
+
+/**
+ * raw_smp_processor_id - Determine the raw CPU ID of the CPU running it
+ *
+ * What we really want to do is to use the CPUID hardware CPU register to get
+ * this information, but accesses to that aren't cached, and run at system bus
+ * speed, not CPU speed. A copy of this value is, however, stored in the
+ * thread_info struct, and that can be cached.
+ *
+ * An alternate way of dealing with this could be to use the EPSW.S bits to
+ * cache this information for systems with up to four CPUs.
+ */
+#if 0
+#define raw_smp_processor_id() (CPUID)
+#else
+#define raw_smp_processor_id() (current_thread_info()->cpu)
#endif
+
+static inline int cpu_logical_map(int cpu)
+{
+ return cpu;
+}
+
+static inline int cpu_number_map(int cpu)
+{
+ return cpu;
+}
+
+
+extern cpumask_t cpu_boot_map;
+
+extern void smp_init_cpus(void);
+extern void smp_cache_interrupt(void);
+extern void send_IPI_allbutself(int irq);
+extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+#endif /* CONFIG_HOTPLUG_CPU */
+
+#ifdef CONFIG_PREEMPT /* FIXME */
+#define __frame \
+ ({ \
+ struct pt_regs *f; \
+ preempt_disable(); \
+ f = ___frame[CPUID]; \
+ preempt_enable(); \
+ f; \
+ })
+#else
+#define __frame ___frame[CPUID]
+#endif
+
+#endif /* __ASSEMBLY__ */
+#else /* CONFIG_SMP */
+#ifndef __ASSEMBLY__
+
+static inline void smp_init_cpus(void) {}
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_SMP */
+
+#endif /* _ASM_SMP_H */
diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h
index 4bf9c8b..9342915 100644
--- a/arch/mn10300/include/asm/spinlock.h
+++ b/arch/mn10300/include/asm/spinlock.h
@@ -11,6 +11,183 @@
#ifndef _ASM_SPINLOCK_H
#define _ASM_SPINLOCK_H
-#error SMP spinlocks not implemented for MN10300
+#include <asm/atomic.h>
+#include <asm/rwlock.h>
+#include <asm/page.h>
+/*
+ * Simple spin lock operations. There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0)
+#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x))
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+ asm volatile(
+ " bclr 1,(0,%0) \n"
+ :
+ : "a"(&lock->slock)
+ : "memory", "cc");
+}
+
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+ int ret;
+
+ asm volatile(
+ " mov 1,%0 \n"
+ " bset %0,(%1) \n"
+ " bne 1f \n"
+ " clr %0 \n"
+ "1: xor 1,%0 \n"
+ : "=d"(ret)
+ : "a"(&lock->slock)
+ : "memory", "cc");
+
+ return ret;
+}
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+ asm volatile(
+ "1: bset 1,(0,%0) \n"
+ " bne 1b \n"
+ :
+ : "a"(&lock->slock)
+ : "memory", "cc");
+}
+
+static inline void arch_spin_lock_flags(arch_spinlock_t *lock,
+ unsigned long flags)
+{
+ int temp;
+
+ asm volatile(
+ "1: bset 1,(0,%2) \n"
+ " beq 3f \n"
+ " mov %1,epsw \n"
+ "2: mov (0,%2),%0 \n"
+ " or %0,%0 \n"
+ " bne 2b \n"
+ " mov %3,%0 \n"
+ " mov %0,epsw \n"
+ " nop \n"
+ " nop \n"
+ " bra 1b\n"
+ "3: \n"
+ : "=&d" (temp)
+ : "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL)
+ : "memory", "cc");
+}
+
+#ifdef __KERNEL__
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define arch_read_can_lock(x) ((int)(x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
+/*
+ * On mn10300, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ */
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
+ __build_read_lock(rw, "__read_lock_failed");
+#else
+ {
+ atomic_t *count = (atomic_t *)rw;
+ while (atomic_dec_return(count) < 0)
+ atomic_inc(count);
+ }
+#endif
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
+ __build_write_lock(rw, "__write_lock_failed");
+#else
+ {
+ atomic_t *count = (atomic_t *)rw;
+ while (!atomic_sub_and_test(RW_LOCK_BIAS, count))
+ atomic_add(RW_LOCK_BIAS, count);
+ }
+#endif
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
+ __build_read_unlock(rw);
+#else
+ {
+ atomic_t *count = (atomic_t *)rw;
+ atomic_inc(count);
+ }
+#endif
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
+ __build_write_unlock(rw);
+#else
+ {
+ atomic_t *count = (atomic_t *)rw;
+ atomic_add(RW_LOCK_BIAS, count);
+ }
+#endif
+}
+
+static inline int arch_read_trylock(arch_rwlock_t *lock)
+{
+ atomic_t *count = (atomic_t *)lock;
+ atomic_dec(count);
+ if (atomic_read(count) >= 0)
+ return 1;
+ atomic_inc(count);
+ return 0;
+}
+
+static inline int arch_write_trylock(arch_rwlock_t *lock)
+{
+ atomic_t *count = (atomic_t *)lock;
+ if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+ return 1;
+ atomic_add(RW_LOCK_BIAS, count);
+ return 0;
+}
+
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+#define _raw_spin_relax(lock) cpu_relax()
+#define _raw_read_relax(lock) cpu_relax()
+#define _raw_write_relax(lock) cpu_relax()
+
+#endif /* __KERNEL__ */
#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/mn10300/include/asm/spinlock_types.h b/arch/mn10300/include/asm/spinlock_types.h
new file mode 100644
index 0000000..653dc51
--- /dev/null
+++ b/arch/mn10300/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_SPINLOCK_TYPES_H
+#define _ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct arch_spinlock {
+ unsigned int slock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
+
+typedef struct {
+ unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
+
+#endif /* _ASM_SPINLOCK_TYPES_H */
diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h
index 7de90bc..8ff3e5a 100644
--- a/arch/mn10300/include/asm/system.h
+++ b/arch/mn10300/include/asm/system.h
@@ -12,6 +12,7 @@
#define _ASM_SYSTEM_H
#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
@@ -57,8 +58,6 @@
#define nop() asm volatile ("nop")
-#endif /* !__ASSEMBLY__ */
-
/*
* Force strict CPU ordering.
* And yes, this is required on UP too when we're talking
@@ -85,17 +84,19 @@
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
-#else
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#else /* CONFIG_SMP */
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
-#endif
-
#define set_mb(var, value) do { var = value; mb(); } while (0)
+#endif /* CONFIG_SMP */
+
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define read_barrier_depends() do {} while (0)
#define smp_read_barrier_depends() do {} while (0)
+#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_SYSTEM_H */
diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h
index 1d883b7..c634977 100644
--- a/arch/mn10300/include/asm/timer-regs.h
+++ b/arch/mn10300/include/asm/timer-regs.h
@@ -17,21 +17,27 @@
#ifdef __KERNEL__
-/* timer prescalar control */
+/*
+ * Timer prescalar control
+ */
#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */
#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */
#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */
-/* 8 bit timers */
+/*
+ * 8-bit timers
+ */
#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */
#define TM0MD_SRC 0x07 /* timer source */
#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */
#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
+#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */
#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */
+#endif /* CONFIG_AM33_2 */
#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -43,7 +49,9 @@
#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */
#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */
+#endif /* CONFIG_AM33_2 */
#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -55,7 +63,9 @@
#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */
#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#if defined(CONFIG_AM33_2)
#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */
+#endif /* CONFIG_AM33_2 */
#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -64,11 +74,13 @@
#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */
+#define TM3MD_SRC_TM2CASCADE 0x03 /* - cascade with timer 2 */
#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */
+#endif /* CONFIG_AM33_2 */
#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -96,7 +108,9 @@
#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */
#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */
-/* 16-bit timers 4,5 & 7-11 */
+/*
+ * 16-bit timers 4,5 & 7-15
+ */
#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */
#define TM4MD_SRC 0x07 /* timer source */
#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */
@@ -105,7 +119,9 @@
#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */
+#endif /* CONFIG_AM33_2 */
#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -118,7 +134,11 @@
#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */
+#else /* !CONFIG_AM33_2 */
+#define TM5MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#endif /* CONFIG_AM33_2 */
#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -130,7 +150,9 @@
#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */
+#endif /* CONFIG_AM33_2 */
#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -143,7 +165,11 @@
#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */
+#else /* !CONFIG_AM33_2 */
+#define TM8MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#endif /* CONFIG_AM33_2 */
#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -156,7 +182,11 @@
#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */
+#else /* !CONFIG_AM33_2 */
+#define TM9MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#endif /* CONFIG_AM33_2 */
#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -169,7 +199,11 @@
#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */
+#else /* !CONFIG_AM33_2 */
+#define TM10MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#endif /* CONFIG_AM33_2 */
#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */
@@ -178,32 +212,101 @@
#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */
+#else /* !CONFIG_AM33_2 */
+#define TM11MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#endif /* CONFIG_AM33_2 */
#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */
+#if defined(CONFIG_AM34_2)
+#define TM12MD __SYSREG(0xd4003180, u8) /* timer 11 mode register */
+#define TM12MD_SRC 0x07 /* timer source */
+#define TM12MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM12MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM12MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM12MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM12MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM12MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM12MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#define TM12MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM12MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM13MD __SYSREG(0xd4003182, u8) /* timer 11 mode register */
+#define TM13MD_SRC 0x07 /* timer source */
+#define TM13MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM13MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM13MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM13MD_SRC_TM12CASCADE 0x03 /* - cascade with timer 12 */
+#define TM13MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM13MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM13MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM13MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#define TM13MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM13MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM14MD __SYSREG(0xd4003184, u8) /* timer 11 mode register */
+#define TM14MD_SRC 0x07 /* timer source */
+#define TM14MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM14MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM14MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM14MD_SRC_TM13CASCADE 0x03 /* - cascade with timer 13 */
+#define TM14MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM14MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM14MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM14MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#define TM14MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM14MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM15MD __SYSREG(0xd4003186, u8) /* timer 11 mode register */
+#define TM15MD_SRC 0x07 /* timer source */
+#define TM15MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM15MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM15MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM15MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM15MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM15MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM15MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
+#define TM15MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM15MD_COUNT_ENABLE 0x80 /* timer count enable */
+#endif /* CONFIG_AM34_2 */
+
+
#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */
#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */
+#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */
#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */
#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */
#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */
+#define TM89BR __SYSREG(0xd4003098, u32) /* timer 8:9 base register */
#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */
#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */
-#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */
+#if defined(CONFIG_AM34_2)
+#define TM12BR __SYSREG(0xd4003190, u16) /* timer 12 base register */
+#define TM13BR __SYSREG(0xd4003192, u16) /* timer 13 base register */
+#define TM14BR __SYSREG(0xd4003194, u16) /* timer 14 base register */
+#define TM15BR __SYSREG(0xd4003196, u16) /* timer 15 base register */
+#endif /* CONFIG_AM34_2 */
#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */
#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */
#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */
-
#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */
#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */
#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */
+#define TM89BC __SYSREG(0xd40030a8, u32) /* timer 8:9 binary counter */
#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */
#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */
+#if defined(CONFIG_AM34_2)
+#define TM12BC __SYSREG(0xd40031a0, u16) /* timer 12 binary counter */
+#define TM13BC __SYSREG(0xd40031a2, u16) /* timer 13 binary counter */
+#define TM14BC __SYSREG(0xd40031a4, u16) /* timer 14 binary counter */
+#define TM15BC __SYSREG(0xd40031a6, u16) /* timer 15 binary counter */
+#endif /* CONFIG_AM34_2 */
#define TM4IRQ 6 /* timer 4 IRQ */
#define TM5IRQ 7 /* timer 5 IRQ */
@@ -212,6 +315,12 @@
#define TM9IRQ 13 /* timer 9 IRQ */
#define TM10IRQ 14 /* timer 10 IRQ */
#define TM11IRQ 15 /* timer 11 IRQ */
+#if defined(CONFIG_AM34_2)
+#define TM12IRQ 64 /* timer 12 IRQ */
+#define TM13IRQ 65 /* timer 13 IRQ */
+#define TM14IRQ 66 /* timer 14 IRQ */
+#define TM15IRQ 67 /* timer 15 IRQ */
+#endif /* CONFIG_AM34_2 */
#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */
#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */
@@ -220,8 +329,16 @@
#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */
#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */
#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */
+#if defined(CONFIG_AM34_2)
+#define TM12ICR GxICR(TM12IRQ) /* timer 12 uflow intr ctrl reg */
+#define TM13ICR GxICR(TM13IRQ) /* timer 13 uflow intr ctrl reg */
+#define TM14ICR GxICR(TM14IRQ) /* timer 14 uflow intr ctrl reg */
+#define TM15ICR GxICR(TM15IRQ) /* timer 15 uflow intr ctrl reg */
+#endif /* CONFIG_AM34_2 */
-/* 16-bit timer 6 */
+/*
+ * 16-bit timer 6
+ */
#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */
#define TM6MD_SRC 0x0007 /* timer source */
#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */
@@ -229,10 +346,14 @@
#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */
#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */
#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */
-#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */
+#define TM6MD_SRC_TM2UFLOW 0x0006 /* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
+/* #define TM6MD_SRC_TM6IOB_BOTH 0x0006 */ /* - TM6IOB pin input (both edges) */
#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */
-#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */
+#endif /* CONFIG_AM33_2 */
#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */
+#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */
+#if defined(CONFIG_AM33_2)
#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */
#define TM6MD_PWM 0x3800 /* PWM output mode */
#define TM6MD_PWM_DIS 0x0000 /* - disabled */
@@ -240,10 +361,15 @@
#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */
#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */
#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */
+#endif /* CONFIG_AM33_2 */
+
#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */
#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */
#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */
+#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
+#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
+#if defined(CONFIG_AM33_2)
#define TM6MDA_OUT 0x07 /* output select */
#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */
#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */
@@ -251,30 +377,35 @@
#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */
#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */
#define TM6MDA_MODE 0xc0 /* compare A register mode */
-#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
-#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
#define TM6MDA_EDGE 0x20 /* compare A edge select */
#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */
#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */
#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */
+#else /* !CONFIG_AM33_2 */
+#define TM6MDA_MODE 0x40 /* compare A register mode */
+#endif /* CONFIG_AM33_2 */
#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */
+#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
+#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
+#if defined(CONFIG_AM33_2)
#define TM6MDB_OUT 0x07 /* output select */
#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */
#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */
#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */
#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */
#define TM6MDB_MODE 0xc0 /* compare B register mode */
-#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
-#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
#define TM6MDB_EDGE 0x20 /* compare B edge select */
#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */
#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */
#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */
+#else /* !CONFIG_AM33_2 */
+#define TM6MDB_MODE 0x40 /* compare B register mode */
+#endif /* CONFIG_AM33_2 */
#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */
#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */
@@ -288,6 +419,34 @@
#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */
#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */
+#if defined(CONFIG_AM34_2)
+/*
+ * MTM: OS Tick-Timer
+ */
+#define TMTMD __SYSREG(0xd4004100, u8) /* Tick Timer mode register */
+#define TMTMD_TMTLDE 0x40 /* initialize TMTBC = TMTBR */
+#define TMTMD_TMTCNE 0x80 /* timer count enable */
+
+#define TMTBR __SYSREG(0xd4004110, u32) /* Tick Timer mode reg */
+#define TMTBC __SYSREG(0xd4004120, u32) /* Tick Timer mode reg */
+
+/*
+ * MTM: OS Timestamp-Timer
+ */
+#define TMSMD __SYSREG(0xd4004140, u8) /* Tick Timer mode register */
+#define TMSMD_TMSLDE 0x40 /* initialize TMSBC = TMSBR */
+#define TMSMD_TMSCNE 0x80 /* timer count enable */
+
+#define TMSBR __SYSREG(0xd4004150, u32) /* Tick Timer mode register */
+#define TMSBC __SYSREG(0xd4004160, u32) /* Tick Timer mode register */
+
+#define TMTIRQ 119 /* OS Tick timer IRQ */
+#define TMSIRQ 120 /* Timestamp timer IRQ */
+
+#define TMTICR GxICR(TMTIRQ) /* OS Tick timer uflow intr ctrl reg */
+#define TMSICR GxICR(TMSIRQ) /* Timestamp timer uflow intr ctrl reg */
+#endif /* CONFIG_AM34_2 */
+
#endif /* __KERNEL__ */
#endif /* _ASM_TIMER_REGS_H */
diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h
index 8d031f9..ce5719a 100644
--- a/arch/mn10300/include/asm/timex.h
+++ b/arch/mn10300/include/asm/timex.h
@@ -16,8 +16,7 @@
#define TICK_SIZE (tick_nsec / 1000)
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
- * to something appropriate, but what? */
+#define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */
extern cycles_t cacheflush_time;
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 197a7af..47e7951 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -377,7 +377,7 @@
#if 0
-#error don't use - these macros don't increment to & from pointers
+#error "don't use - these macros don't increment to & from pointers"
/* Optimize just a little bit when we know the size of the move. */
#define __constant_copy_user(to, from, size) \
do { \