igb: Streamline RSS queue and queue pairing assignment logic.
Rather than spread out the complexity of the RSS queue and queue pairing
assignment logic, place it all in one location for simplicity and
readability.
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 6409054..a7c9c5d 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1048,11 +1048,6 @@
if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
numvecs += adapter->num_tx_queues;
- /* i210 and i211 can only have 4 MSIX vectors for rx/tx queues. */
- if ((adapter->hw.mac.type == e1000_i210)
- || (adapter->hw.mac.type == e1000_i211))
- numvecs = 4;
-
/* store the number of vectors reserved for queues */
adapter->num_q_vectors = numvecs;
@@ -2338,6 +2333,7 @@
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
+ u32 max_rss_queues;
pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
@@ -2370,40 +2366,69 @@
} else
adapter->vfs_allocated_count = max_vfs;
break;
- case e1000_i210:
- case e1000_i211:
- adapter->vfs_allocated_count = 0;
- break;
default:
break;
}
#endif /* CONFIG_PCI_IOV */
+
+ /* Determine the maximum number of RSS queues supported. */
switch (hw->mac.type) {
- case e1000_i210:
- adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES_I210,
- num_online_cpus());
- break;
case e1000_i211:
- adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES_I211,
- num_online_cpus());
+ max_rss_queues = IGB_MAX_RX_QUEUES_I211;
break;
+ case e1000_82575:
+ case e1000_i210:
+ max_rss_queues = IGB_MAX_RX_QUEUES_82575;
+ break;
+ case e1000_i350:
+ /* I350 cannot do RSS and SR-IOV at the same time */
+ if (!!adapter->vfs_allocated_count) {
+ max_rss_queues = 1;
+ break;
+ }
+ /* fall through */
+ case e1000_82576:
+ if (!!adapter->vfs_allocated_count) {
+ max_rss_queues = 2;
+ break;
+ }
+ /* fall through */
+ case e1000_82580:
default:
- adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES,
- num_online_cpus());
+ max_rss_queues = IGB_MAX_RX_QUEUES;
break;
}
- /* i350 cannot do RSS and SR-IOV at the same time */
- if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count)
- adapter->rss_queues = 1;
- /*
- * if rss_queues > 4 or vfs are going to be allocated with rss_queues
- * then we should combine the queues into a queue pair in order to
- * conserve interrupts due to limited supply
- */
- if ((adapter->rss_queues > 4) ||
- ((adapter->rss_queues > 1) && (adapter->vfs_allocated_count > 6)))
- adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());
+
+ /* Determine if we need to pair queues. */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_i211:
+ /* Device supports enough interrupts without queue pairing. */
+ break;
+ case e1000_82576:
+ /*
+ * If VFs are going to be allocated with RSS queues then we
+ * should pair the queues in order to conserve interrupts due
+ * to limited supply.
+ */
+ if ((adapter->rss_queues > 1) &&
+ (adapter->vfs_allocated_count > 6))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ /* fall through */
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i210:
+ default:
+ /*
+ * If rss_queues > half of max_rss_queues, pair the queues in
+ * order to conserve interrupts due to limited supply.
+ */
+ if (adapter->rss_queues > (max_rss_queues / 2))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ break;
+ }
/* Setup and initialize a copy of the hw vlan table array */
adapter->shadow_vfta = kzalloc(sizeof(u32) *