IB/mthca: Clean up error unwind flow in mthca_reset()
The kfree() function was called in a few cases by the mthca_reset()
function during error handling even if the passed variables "bridge_header"
and "hca_header" contained a null pointer.
Adjust jump targets according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
diff --git a/drivers/infiniband/hw/mthca/mthca_reset.c b/drivers/infiniband/hw/mthca/mthca_reset.c
index c521654..6727af2 100644
--- a/drivers/infiniband/hw/mthca/mthca_reset.c
+++ b/drivers/infiniband/hw/mthca/mthca_reset.c
@@ -98,7 +98,7 @@
err = -ENOMEM;
mthca_err(mdev, "Couldn't allocate memory to save HCA "
"PCI header, aborting.\n");
- goto out;
+ goto put_dev;
}
for (i = 0; i < 64; ++i) {
@@ -108,7 +108,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't save HCA "
"PCI header, aborting.\n");
- goto out;
+ goto free_hca;
}
}
@@ -121,7 +121,7 @@
err = -ENOMEM;
mthca_err(mdev, "Couldn't allocate memory to save HCA "
"bridge PCI header, aborting.\n");
- goto out;
+ goto free_hca;
}
for (i = 0; i < 64; ++i) {
@@ -131,7 +131,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't save HCA bridge "
"PCI header, aborting.\n");
- goto out;
+ goto free_bh;
}
}
bridge_pcix_cap = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
@@ -139,7 +139,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't locate HCA bridge "
"PCI-X capability, aborting.\n");
- goto out;
+ goto free_bh;
}
}
@@ -152,7 +152,7 @@
err = -ENOMEM;
mthca_err(mdev, "Couldn't map HCA reset register, "
"aborting.\n");
- goto out;
+ goto free_bh;
}
writel(MTHCA_RESET_VALUE, reset);
@@ -172,7 +172,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't access HCA after reset, "
"aborting.\n");
- goto out;
+ goto free_bh;
}
if (v != 0xffffffff)
@@ -184,7 +184,7 @@
err = -ENODEV;
mthca_err(mdev, "PCI device did not come back after reset, "
"aborting.\n");
- goto out;
+ goto free_bh;
}
good:
@@ -195,14 +195,14 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA bridge Upstream "
"split transaction control, aborting.\n");
- goto out;
+ goto free_bh;
}
if (pci_write_config_dword(bridge, bridge_pcix_cap + 0xc,
bridge_header[(bridge_pcix_cap + 0xc) / 4])) {
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA bridge Downstream "
"split transaction control, aborting.\n");
- goto out;
+ goto free_bh;
}
/*
* Bridge control register is at 0x3e, so we'll
@@ -216,7 +216,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA bridge reg %x, "
"aborting.\n", i);
- goto out;
+ goto free_bh;
}
}
@@ -225,7 +225,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA bridge COMMAND, "
"aborting.\n");
- goto out;
+ goto free_bh;
}
}
@@ -235,7 +235,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA PCI-X "
"command register, aborting.\n");
- goto out;
+ goto free_bh;
}
}
@@ -246,7 +246,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA PCI Express "
"Device Control register, aborting.\n");
- goto out;
+ goto free_bh;
}
linkctl = hca_header[(hca_pcie_cap + PCI_EXP_LNKCTL) / 4];
if (pcie_capability_write_word(mdev->pdev, PCI_EXP_LNKCTL,
@@ -254,7 +254,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA PCI Express "
"Link control register, aborting.\n");
- goto out;
+ goto free_bh;
}
}
@@ -266,7 +266,7 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA reg %x, "
"aborting.\n", i);
- goto out;
+ goto free_bh;
}
}
@@ -275,13 +275,12 @@
err = -ENODEV;
mthca_err(mdev, "Couldn't restore HCA COMMAND, "
"aborting.\n");
- goto out;
}
-
-out:
- pci_dev_put(bridge);
+free_bh:
kfree(bridge_header);
+free_hca:
kfree(hca_header);
-
+put_dev:
+ pci_dev_put(bridge);
return err;
}