isci: combine request flags
Combine three bools into one unsigned long 'flags'. Doesn't increase the
request size due to packing. (to do: optimize the structure layout).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 55859d5..27376ba 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -2183,7 +2183,7 @@
enum sas_open_rej_reason open_rej_reason)
{
/* Task in the target is done. */
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
*response_ptr = SAS_TASK_UNDELIVERED;
*status_ptr = SAS_OPEN_REJECT;
*complete_to_host_ptr = isci_perform_normal_io_completion;
@@ -2248,7 +2248,7 @@
else
*status_ptr = SAS_ABORTED_TASK;
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
*complete_to_host_ptr =
isci_perform_normal_io_completion;
@@ -2261,7 +2261,7 @@
else
*status_ptr = SAM_STAT_TASK_ABORTED;
- request->complete_in_target = false;
+ clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
*complete_to_host_ptr =
isci_perform_error_io_completion;
@@ -2292,7 +2292,7 @@
else
*status_ptr = SAS_ABORTED_TASK;
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
*complete_to_host_ptr = isci_perform_normal_io_completion;
break;
@@ -2397,11 +2397,11 @@
*status_ptr = SAM_STAT_TASK_ABORTED;
if (task->task_proto == SAS_PROTOCOL_SMP) {
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
*complete_to_host_ptr = isci_perform_normal_io_completion;
} else {
- request->complete_in_target = false;
+ clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
*complete_to_host_ptr = isci_perform_error_io_completion;
}
@@ -2552,7 +2552,7 @@
*
* The target is still there (since the TMF was successful).
*/
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
response = SAS_TASK_COMPLETE;
/* See if the device has been/is being stopped. Note
@@ -2579,7 +2579,7 @@
* Aborting also means an external thread is explicitly managing
* this request, so that we do not complete it up the stack.
*/
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
response = SAS_TASK_UNDELIVERED;
if (!idev)
@@ -2605,7 +2605,7 @@
* the device (reset, tear down, etc.), and the I/O needs
* to be completed up the stack.
*/
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
response = SAS_TASK_UNDELIVERED;
/* See if the device has been/is being stopped. Note
@@ -2675,7 +2675,7 @@
/* use the task status set in the task struct by the
* isci_request_process_response_iu call.
*/
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
response = task->task_status.resp;
status = task->task_status.stat;
break;
@@ -2685,7 +2685,7 @@
response = SAS_TASK_COMPLETE;
status = SAM_STAT_GOOD;
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
if (task->task_proto == SAS_PROTOCOL_SMP) {
void *rsp = &request->sci.smp.rsp;
@@ -2737,7 +2737,7 @@
/* The request was terminated explicitly. No handling
* is needed in the SCSI error handler path.
*/
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
response = SAS_TASK_UNDELIVERED;
/* See if the device has been/is being stopped. Note
@@ -2777,7 +2777,7 @@
status = SAM_STAT_TASK_ABORTED;
complete_to_host = isci_perform_error_io_completion;
- request->complete_in_target = false;
+ clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
break;
case SCI_FAILURE_RETRY_REQUIRED:
@@ -2790,7 +2790,7 @@
status = SAS_ABORTED_TASK;
complete_to_host = isci_perform_normal_io_completion;
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
break;
@@ -2813,10 +2813,10 @@
status = SAS_ABORTED_TASK;
if (SAS_PROTOCOL_SMP == task->task_proto) {
- request->complete_in_target = true;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
complete_to_host = isci_perform_normal_io_completion;
} else {
- request->complete_in_target = false;
+ clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
complete_to_host = isci_perform_error_io_completion;
}
break;
@@ -2870,7 +2870,7 @@
* terminated again, and to cause any calls into abort
* task to recognize the already completed case.
*/
- request->terminated = true;
+ set_bit(IREQ_TERMINATED, &request->flags);
}
static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm)
@@ -2919,7 +2919,7 @@
struct isci_request *ireq = sci_req_to_ireq(sci_req);
/* Tell the SCI_USER that the IO request is complete */
- if (sci_req->is_task_management_request == false)
+ if (!test_bit(IREQ_TMF, &ireq->flags))
isci_request_io_request_complete(ihost, ireq,
sci_req->sci_status);
else
@@ -3032,8 +3032,6 @@
sci_req->scu_status = 0;
sci_req->post_context = 0xFFFFFFFF;
sci_req->tc = &scic->task_context_table[ISCI_TAG_TCI(io_tag)];
-
- sci_req->is_task_management_request = false;
WARN_ONCE(io_tag == SCI_CONTROLLER_INVALID_IO_TAG, "straggling invalid tag usage\n");
}
@@ -3077,7 +3075,7 @@
if (dev->dev_type == SAS_END_DEV ||
dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
- sci_req->is_task_management_request = true;
+ set_bit(IREQ_TMF, &sci_req_to_ireq(sci_req)->flags);
memset(sci_req->tc, 0, sizeof(struct scu_task_context));
} else
status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
@@ -3379,12 +3377,8 @@
ireq->request_daddr = handle;
ireq->isci_host = ihost;
ireq->io_request_completion = NULL;
- ireq->terminated = false;
-
+ ireq->flags = 0;
ireq->num_sg_entries = 0;
-
- ireq->complete_in_target = false;
-
INIT_LIST_HEAD(&ireq->completed_node);
INIT_LIST_HEAD(&ireq->dev_node);
@@ -3496,7 +3490,7 @@
* hardware, so clear the request handle
* here so no terminations will be done.
*/
- ireq->terminated = true;
+ set_bit(IREQ_TERMINATED, &ireq->flags);
isci_request_change_state(ireq, completed);
}
spin_unlock_irqrestore(&ihost->scic_lock, flags);