mfd: AB8500 register access via PRCMU I2C
This patch adds the choice of accessing the AB8500 registers
via prcmu I2C. Access either via SPI or I2C is supported.
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e310cb26..01c928b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -475,14 +475,25 @@
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on SPI=y && GENERIC_HARDIRQS && ABX500_CORE
+ depends on GENERIC_HARDIRQS && ABX500_CORE && SPI_MASTER
select MFD_CORE
help
Select this option to enable access to AB8500 power management
- chip. This connects to U8500 on the SSP/SPI bus and exports
- read/write functions for the devices to get access to this chip.
+ chip. This connects to U8500 either on the SSP/SPI bus
+ or the I2C bus via PRCMU. It also adds the irq_chip
+ parts for handling the Mixed Signal chip events.
This chip embeds various other multimedia funtionalities as well.
+config AB8500_I2C_CORE
+ bool "AB8500 register access via PRCMU I2C"
+ depends on AB8500_CORE && UX500_SOC_DB8500
+ default y
+ help
+ This enables register access to the AB8500 chip via PRCMU I2C.
+ The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
+ the I2C bus is connected to the Power Reset
+ and Mangagement Unit, PRCMU.
+
config AB8500_DEBUG
bool "Enable debug info via debugfs"
depends on AB8500_CORE && DEBUG_FS
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f771c52..d5968cd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -69,6 +69,7 @@
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
obj-$(CONFIG_AB3550_CORE) += ab3550-core.o
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-spi.o
+obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c
new file mode 100644
index 0000000..6820327
--- /dev/null
+++ b/drivers/mfd/ab8500-i2c.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson.
+ * License Terms: GNU General Public License v2
+ * This file was based on drivers/mfd/ab8500-spi.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ab8500.h>
+
+#include <mach/prcmu.h>
+
+static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+ int ret;
+
+ ret = prcmu_abb_write((u8)(addr >> 8), (u8)(addr & 0xFF), &data, 1);
+ if (ret < 0)
+ dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
+ return ret;
+}
+
+static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr)
+{
+ int ret;
+ u8 data;
+
+ ret = prcmu_abb_read((u8)(addr >> 8), (u8)(addr & 0xFF), &data, 1);
+ if (ret < 0) {
+ dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
+ return ret;
+ }
+ return (int)data;
+}
+
+static int __devinit ab8500_i2c_probe(struct platform_device *plf)
+{
+ struct ab8500 *ab8500;
+ struct resource *resource;
+ int ret;
+
+ ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL);
+ if (!ab8500)
+ return -ENOMEM;
+
+ ab8500->dev = &plf->dev;
+
+ resource = platform_get_resource(plf, IORESOURCE_IRQ, 0);
+ if (!resource) {
+ kfree(ab8500);
+ return -ENODEV;
+ }
+
+ ab8500->irq = resource->start;
+
+ ab8500->read = ab8500_i2c_read;
+ ab8500->write = ab8500_i2c_write;
+
+ platform_set_drvdata(plf, ab8500);
+
+ ret = ab8500_init(ab8500);
+ if (ret)
+ kfree(ab8500);
+
+ return ret;
+}
+
+static int __devexit ab8500_i2c_remove(struct platform_device *plf)
+{
+ struct ab8500 *ab8500 = platform_get_drvdata(plf);
+
+ ab8500_exit(ab8500);
+ kfree(ab8500);
+
+ return 0;
+}
+
+static struct platform_driver ab8500_i2c_driver = {
+ .driver = {
+ .name = "ab8500-i2c",
+ .owner = THIS_MODULE,
+ },
+ .probe = ab8500_i2c_probe,
+ .remove = __devexit_p(ab8500_i2c_remove)
+};
+
+static int __init ab8500_i2c_init(void)
+{
+ return platform_driver_register(&ab8500_i2c_driver);
+}
+
+static void __exit ab8500_i2c_exit(void)
+{
+ platform_driver_unregister(&ab8500_i2c_driver);
+}
+subsys_initcall(ab8500_i2c_init);
+module_exit(ab8500_i2c_exit);
+
+MODULE_AUTHOR("Mattias WALLIN <mattias.wallin@stericsson.com");
+MODULE_DESCRIPTION("AB8500 Core access via PRCMU I2C");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c
index 01b6d58..b165342 100644
--- a/drivers/mfd/ab8500-spi.c
+++ b/drivers/mfd/ab8500-spi.c
@@ -119,7 +119,7 @@
static struct spi_driver ab8500_spi_driver = {
.driver = {
- .name = "ab8500",
+ .name = "ab8500-spi",
.owner = THIS_MODULE,
},
.probe = ab8500_spi_probe,