pcmcia: do not lock socket driver module on card insert
Do not lock the socket driver module on card insert, as
the PCMCIA core can handle a socket module removal, at least
if we add a call to socket_remove() on pccardd()'s shutdown.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index f0630a6..137a5db 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -407,7 +407,7 @@
"*** DANGER *** unable to remove socket power\n");
}
- cs_socket_put(s);
+ s->state &= ~SOCKET_INUSE;
}
static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
@@ -496,8 +496,8 @@
dev_dbg(&skt->dev, "insert\n");
- if (!cs_socket_get(skt))
- return -ENODEV;
+ WARN_ON(skt->state & SOCKET_INUSE);
+ skt->state |= SOCKET_INUSE;
ret = socket_setup(skt, setup_delay);
if (ret == 0) {
@@ -697,6 +697,13 @@
/* make sure we are running before we exit */
set_current_state(TASK_RUNNING);
+ /* shut down socket, if a device is still present */
+ if (skt->state & SOCKET_PRESENT) {
+ mutex_lock(&skt->skt_mutex);
+ socket_remove(skt);
+ mutex_unlock(&skt->skt_mutex);
+ }
+
/* remove from the device core */
pccard_sysfs_remove_socket(&skt->dev);
device_unregister(&skt->dev);
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 3bc02d5..9a3bbad 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -87,26 +87,6 @@
#define SOCKET_CARDBUS 0x8000
#define SOCKET_CARDBUS_CONFIG 0x10000
-static inline int cs_socket_get(struct pcmcia_socket *skt)
-{
- int ret;
-
- WARN_ON(skt->state & SOCKET_INUSE);
-
- ret = try_module_get(skt->owner);
- if (ret)
- skt->state |= SOCKET_INUSE;
- return ret;
-}
-
-static inline void cs_socket_put(struct pcmcia_socket *skt)
-{
- if (skt->state & SOCKET_INUSE) {
- skt->state &= ~SOCKET_INUSE;
- module_put(skt->owner);
- }
-}
-
/*
* Stuff internal to module "pcmcia_core":