ARM: at91/tc: add device tree support to atmel_tclib

Device tree support added to atmel_tclib: the generic Timer Counter
library. This is used by the clocksource/clockevent driver tcb_clksrc.

The current DT enabled platforms are also modified to use it:
- .dtsi files are modified to add Timer Counter Block entries
- alias are created to allow identification of each block
- clkdev lookup tables are added for clocks identification.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 04c56c4..a100db0 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -26,6 +26,8 @@
 		gpio0 = &pioA;
 		gpio1 = &pioB;
 		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
 	};
 	cpus {
 		cpu@0 {
@@ -63,6 +65,18 @@
 				interrupts = <1 4>;
 			};
 
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 4 18 4 19 4>;
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 4 27 4 28 4>;
+			};
+
 			pioA: gpio@fffff400 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffff400 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3881cab..f779667 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -27,6 +27,8 @@
 		gpio2 = &pioC;
 		gpio3 = &pioD;
 		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
 	};
 	cpus {
 		cpu@0 {
@@ -64,6 +66,19 @@
 				interrupts = <1 4>;
 			};
 
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfff7c000 0x100>;
+				interrupts = <18 4>;
+			};
+
+			tcb1: timer@fffd4000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffd4000 0x100>;
+				interrupts = <18 4>;
+			};
+
 			dma: dma-controller@ffffec00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 4ade265..14b5a9c 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -209,6 +209,13 @@
 	CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
 	CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
+	/* more tc lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index c450cb3..e82a5ae 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -699,8 +699,25 @@
 	.num_resources	= ARRAY_SIZE(tcb1_resources),
 };
 
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+	{ .compatible = "atmel,at91rm9200-tcb" },
+	{ /*sentinel*/ }
+};
+#endif
+
 static void __init at91_add_device_tc(void)
 {
+#if defined(CONFIG_OF)
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, tcb_ids);
+	if (np) {
+		of_node_put(np);
+		return;
+	}
+#endif
+
 	platform_device_register(&at91sam9260_tcb0_device);
 	platform_device_register(&at91sam9260_tcb1_device);
 }
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index a41622ea6..0014573 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -229,6 +229,9 @@
 	CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
 	CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
 	CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
+	/* more tc lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index aee5950..4320b20 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1090,8 +1090,25 @@
 	.num_resources	= ARRAY_SIZE(tcb1_resources),
 };
 
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+	{ .compatible = "atmel,at91rm9200-tcb" },
+	{ /*sentinel*/ }
+};
+#endif
+
 static void __init at91_add_device_tc(void)
 {
+#if defined(CONFIG_OF)
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, tcb_ids);
+	if (np) {
+		of_node_put(np);
+		return;
+	}
+#endif
+
 	platform_device_register(&at91sam9g45_tcb0_device);
 	platform_device_register(&at91sam9g45_tcb1_device);
 }