ixgbe: add hwmon interface to export thermal data
Some of our adapters have thermal data available, this patch exports
this data via hwmon sysfs interface.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
new file mode 100644
index 0000000..aa41fb7
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
@@ -0,0 +1,271 @@
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include "ixgbe_common.h"
+#include "ixgbe_type.h"
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/hwmon.h>
+
+/*
+ * This file provides a sysfs interface to export information from the
+ * driver. The information presented is READ-ONLY.
+ */
+#ifdef CONFIG_IXGBE_HWMON
+
+/* hwmon callback functions */
+static ssize_t ixgbe_hwmon_show_location(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ return sprintf(buf, "loc%u\n",
+ ixgbe_attr->sensor->location);
+}
+
+static ssize_t ixgbe_hwmon_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value;
+
+ /* reset the temp field */
+ ixgbe_attr->hw->mac.ops.get_thermal_sensor_data(ixgbe_attr->hw);
+
+ value = ixgbe_attr->sensor->temp;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t ixgbe_hwmon_show_cautionthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = ixgbe_attr->sensor->caution_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t ixgbe_hwmon_show_maxopthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = ixgbe_attr->sensor->max_op_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+/*
+ * ixgbe_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @ adapter: pointer to the adapter structure
+ * @ offset: offset in the eeprom sensor data table
+ * @ type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int ixgbe_add_hwmon_attr(struct ixgbe_adapter *adapter,
+ unsigned int offset, int type) {
+ int rc;
+ unsigned int n_attr;
+ struct hwmon_attr *ixgbe_attr;
+
+ n_attr = adapter->ixgbe_hwmon_buff.n_hwmon;
+ ixgbe_attr = &adapter->ixgbe_hwmon_buff.hwmon_list[n_attr];
+
+ switch (type) {
+ case IXGBE_HWMON_TYPE_LOC:
+ ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_location;
+ snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+ "temp%u_label", offset);
+ break;
+ case IXGBE_HWMON_TYPE_TEMP:
+ ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_temp;
+ snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+ "temp%u_input", offset);
+ break;
+ case IXGBE_HWMON_TYPE_CAUTION:
+ ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_cautionthresh;
+ snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+ "temp%u_max", offset);
+ break;
+ case IXGBE_HWMON_TYPE_MAX:
+ ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_maxopthresh;
+ snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+ "temp%u_crit", offset);
+ break;
+ default:
+ rc = -EPERM;
+ return rc;
+ }
+
+ /* These always the same regardless of type */
+ ixgbe_attr->sensor =
+ &adapter->hw.mac.thermal_sensor_data.sensor[offset];
+ ixgbe_attr->hw = &adapter->hw;
+ ixgbe_attr->dev_attr.store = NULL;
+ ixgbe_attr->dev_attr.attr.mode = S_IRUGO;
+ ixgbe_attr->dev_attr.attr.name = ixgbe_attr->name;
+
+ rc = device_create_file(&adapter->pdev->dev,
+ &ixgbe_attr->dev_attr);
+
+ if (rc == 0)
+ ++adapter->ixgbe_hwmon_buff.n_hwmon;
+
+ return rc;
+}
+#endif /* CONFIG_IXGBE_HWMON */
+
+static void ixgbe_sysfs_del_adapter(struct ixgbe_adapter *adapter)
+{
+#ifdef CONFIG_IXGBE_HWMON
+ int i;
+#endif /* CONFIG_IXGBE_HWMON */
+
+ if (adapter == NULL)
+ return;
+#ifdef CONFIG_IXGBE_HWMON
+
+ for (i = 0; i < adapter->ixgbe_hwmon_buff.n_hwmon; i++) {
+ device_remove_file(&adapter->pdev->dev,
+ &adapter->ixgbe_hwmon_buff.hwmon_list[i].dev_attr);
+ }
+
+ kfree(adapter->ixgbe_hwmon_buff.hwmon_list);
+
+ if (adapter->ixgbe_hwmon_buff.device)
+ hwmon_device_unregister(adapter->ixgbe_hwmon_buff.device);
+#endif /* CONFIG_IXGBE_HWMON */
+
+ if (adapter->info_kobj != NULL)
+ kobject_put(adapter->info_kobj);
+}
+
+/* called from ixgbe_main.c */
+void ixgbe_sysfs_exit(struct ixgbe_adapter *adapter)
+{
+ ixgbe_sysfs_del_adapter(adapter);
+}
+
+/* called from ixgbe_main.c */
+int ixgbe_sysfs_init(struct ixgbe_adapter *adapter)
+{
+#ifdef CONFIG_IXGBE_HWMON
+ struct hwmon_buff *ixgbe_hwmon = &adapter->ixgbe_hwmon_buff;
+ unsigned int i;
+ int n_attrs;
+#endif /* CONFIG_IXGBE_HWMON */
+ struct net_device *netdev = adapter->netdev;
+ int rc = 0;
+
+ /* create info kobj and attribute listings in kobj */
+ adapter->info_kobj = kobject_create_and_add("info", &netdev->dev.kobj);
+ if (adapter->info_kobj == NULL) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+#ifdef CONFIG_IXGBE_HWMON
+ /* If this method isn't defined we don't support thermals */
+ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) {
+ rc = -EPERM;
+ goto err;
+ }
+
+ /* Don't create thermal hwmon interface if no sensors present */
+ rc = adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw);
+ if (rc)
+ goto err;
+
+ /*
+ * Allocation space for max attributs
+ * max num sensors * values (loc, temp, max, caution)
+ */
+ n_attrs = IXGBE_MAX_SENSORS * 4;
+ ixgbe_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr),
+ GFP_KERNEL);
+ if (!ixgbe_hwmon->hwmon_list) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ ixgbe_hwmon->device = hwmon_device_register(&adapter->pdev->dev);
+ if (IS_ERR(ixgbe_hwmon->device)) {
+ rc = PTR_ERR(ixgbe_hwmon->device);
+ goto err;
+ }
+
+ for (i = 0; i < IXGBE_MAX_SENSORS; i++) {
+ /*
+ * Only create hwmon sysfs entries for sensors that have
+ * meaningful data for.
+ */
+ if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0)
+ continue;
+
+ /* Bail if any hwmon attr struct fails to initialize */
+ rc = ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_CAUTION);
+ rc |= ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_LOC);
+ rc |= ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_TEMP);
+ rc |= ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_MAX);
+ if (rc)
+ goto err;
+ }
+#endif /* CONFIG_IXGBE_HWMON */
+
+ goto exit;
+
+err:
+ ixgbe_sysfs_del_adapter(adapter);
+exit:
+ return rc;
+}
+