Merge branch 'misc' into release
diff --git a/Documentation/acpi/debug.txt b/Documentation/acpi/debug.txt
new file mode 100644
index 0000000..65bf47c
--- /dev/null
+++ b/Documentation/acpi/debug.txt
@@ -0,0 +1,148 @@
+ ACPI Debug Output
+
+
+The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug
+output. This document describes how to use this facility.
+
+Compile-time configuration
+--------------------------
+
+ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG. If this config
+option is turned off, the debug messages are not even built into the
+kernel.
+
+Boot- and run-time configuration
+--------------------------------
+
+When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages
+you're interested in. At boot-time, use the acpi.debug_layer and
+acpi.debug_level kernel command line options. After boot, you can use the
+debug_layer and debug_level files in /sys/module/acpi/parameters/ to control
+the debug messages.
+
+debug_layer (component)
+-----------------------
+
+The "debug_layer" is a mask that selects components of interest, e.g., a
+specific driver or part of the ACPI interpreter. To build the debug_layer
+bitmask, look for the "#define _COMPONENT" in an ACPI source file.
+
+You can set the debug_layer mask at boot-time using the acpi.debug_layer
+command line argument, and you can change it after boot by writing values
+to /sys/module/acpi/parameters/debug_layer.
+
+The possible components are defined in include/acpi/acoutput.h and
+include/acpi/acpi_drivers.h. Reading /sys/module/acpi/parameters/debug_layer
+shows the supported mask values, currently these:
+
+ ACPI_UTILITIES 0x00000001
+ ACPI_HARDWARE 0x00000002
+ ACPI_EVENTS 0x00000004
+ ACPI_TABLES 0x00000008
+ ACPI_NAMESPACE 0x00000010
+ ACPI_PARSER 0x00000020
+ ACPI_DISPATCHER 0x00000040
+ ACPI_EXECUTER 0x00000080
+ ACPI_RESOURCES 0x00000100
+ ACPI_CA_DEBUGGER 0x00000200
+ ACPI_OS_SERVICES 0x00000400
+ ACPI_CA_DISASSEMBLER 0x00000800
+ ACPI_COMPILER 0x00001000
+ ACPI_TOOLS 0x00002000
+ ACPI_BUS_COMPONENT 0x00010000
+ ACPI_AC_COMPONENT 0x00020000
+ ACPI_BATTERY_COMPONENT 0x00040000
+ ACPI_BUTTON_COMPONENT 0x00080000
+ ACPI_SBS_COMPONENT 0x00100000
+ ACPI_FAN_COMPONENT 0x00200000
+ ACPI_PCI_COMPONENT 0x00400000
+ ACPI_POWER_COMPONENT 0x00800000
+ ACPI_CONTAINER_COMPONENT 0x01000000
+ ACPI_SYSTEM_COMPONENT 0x02000000
+ ACPI_THERMAL_COMPONENT 0x04000000
+ ACPI_MEMORY_DEVICE_COMPONENT 0x08000000
+ ACPI_VIDEO_COMPONENT 0x10000000
+ ACPI_PROCESSOR_COMPONENT 0x20000000
+
+debug_level
+-----------
+
+The "debug_level" is a mask that selects different types of messages, e.g.,
+those related to initialization, method execution, informational messages, etc.
+To build debug_level, look at the level specified in an ACPI_DEBUG_PRINT()
+statement.
+
+The ACPI interpreter uses several different levels, but the Linux
+ACPI core and ACPI drivers generally only use ACPI_LV_INFO.
+
+You can set the debug_level mask at boot-time using the acpi.debug_level
+command line argument, and you can change it after boot by writing values
+to /sys/module/acpi/parameters/debug_level.
+
+The possible levels are defined in include/acpi/acoutput.h. Reading
+/sys/module/acpi/parameters/debug_level shows the supported mask values,
+currently these:
+
+ ACPI_LV_INIT 0x00000001
+ ACPI_LV_DEBUG_OBJECT 0x00000002
+ ACPI_LV_INFO 0x00000004
+ ACPI_LV_INIT_NAMES 0x00000020
+ ACPI_LV_PARSE 0x00000040
+ ACPI_LV_LOAD 0x00000080
+ ACPI_LV_DISPATCH 0x00000100
+ ACPI_LV_EXEC 0x00000200
+ ACPI_LV_NAMES 0x00000400
+ ACPI_LV_OPREGION 0x00000800
+ ACPI_LV_BFIELD 0x00001000
+ ACPI_LV_TABLES 0x00002000
+ ACPI_LV_VALUES 0x00004000
+ ACPI_LV_OBJECTS 0x00008000
+ ACPI_LV_RESOURCES 0x00010000
+ ACPI_LV_USER_REQUESTS 0x00020000
+ ACPI_LV_PACKAGE 0x00040000
+ ACPI_LV_ALLOCATIONS 0x00100000
+ ACPI_LV_FUNCTIONS 0x00200000
+ ACPI_LV_OPTIMIZATIONS 0x00400000
+ ACPI_LV_MUTEX 0x01000000
+ ACPI_LV_THREADS 0x02000000
+ ACPI_LV_IO 0x04000000
+ ACPI_LV_INTERRUPTS 0x08000000
+ ACPI_LV_AML_DISASSEMBLE 0x10000000
+ ACPI_LV_VERBOSE_INFO 0x20000000
+ ACPI_LV_FULL_TABLES 0x40000000
+ ACPI_LV_EVENTS 0x80000000
+
+Examples
+--------
+
+For example, drivers/acpi/bus.c contains this:
+
+ #define _COMPONENT ACPI_BUS_COMPONENT
+ ...
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n"));
+
+To turn on this message, set the ACPI_BUS_COMPONENT bit in acpi.debug_layer
+and the ACPI_LV_INFO bit in acpi.debug_level. (The ACPI_DEBUG_PRINT
+statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO
+definition.)
+
+Enable all AML "Debug" output (stores to the Debug object while interpreting
+AML) during boot:
+
+ acpi.debug_layer=0xffffffff acpi.debug_level=0x2
+
+Enable PCI and PCI interrupt routing debug messages:
+
+ acpi.debug_layer=0x400000 acpi.debug_level=0x4
+
+Enable all ACPI hardware-related messages:
+
+ acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
+
+Enable all ACPI_DB_INFO messages after boot:
+
+ # echo 0x4 > /sys/module/acpi/parameters/debug_level
+
+Show all valid component values:
+
+ # cat /sys/module/acpi/parameters/debug_layer
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c86c074..4782fe7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -198,59 +198,30 @@
that require a timer override, but don't have
HPET
- acpi.debug_layer= [HW,ACPI]
+ acpi.debug_layer= [HW,ACPI,ACPI_DEBUG]
+ acpi.debug_level= [HW,ACPI,ACPI_DEBUG]
Format: <int>
- Each bit of the <int> indicates an ACPI debug layer,
- 1: enable, 0: disable. It is useful for boot time
- debugging. After system has booted up, it can be set
- via /sys/module/acpi/parameters/debug_layer.
- CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
- Available bits (add the numbers together) to enable debug output
- for specific parts of the ACPI subsystem:
- 0x01 utilities 0x02 hardware 0x04 events 0x08 tables
- 0x10 namespace 0x20 parser 0x40 dispatcher
- 0x80 executer 0x100 resources 0x200 acpica debugger
- 0x400 os services 0x800 acpica disassembler.
- The number can be in decimal or prefixed with 0x in hex.
- Warning: Many of these options can produce a lot of
- output and make your system unusable. Be very careful.
+ CONFIG_ACPI_DEBUG must be enabled to produce any ACPI
+ debug output. Bits in debug_layer correspond to a
+ _COMPONENT in an ACPI source file, e.g.,
+ #define _COMPONENT ACPI_PCI_COMPONENT
+ Bits in debug_level correspond to a level in
+ ACPI_DEBUG_PRINT statements, e.g.,
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
+ See Documentation/acpi/debug.txt for more information
+ about debug layers and levels.
- acpi.debug_level= [HW,ACPI]
- Format: <int>
- Each bit of the <int> indicates an ACPI debug level,
- which corresponds to the level in an ACPI_DEBUG_PRINT
- statement. After system has booted up, this mask
- can be set via /sys/module/acpi/parameters/debug_level.
+ Enable AML "Debug" output, i.e., stores to the Debug
+ object while interpreting AML:
+ acpi.debug_layer=0xffffffff acpi.debug_level=0x2
+ Enable PCI/PCI interrupt routing info messages:
+ acpi.debug_layer=0x400000 acpi.debug_level=0x4
+ Enable all messages related to ACPI hardware:
+ acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
- CONFIG_ACPI_DEBUG must be enabled for this to produce
- any output. The number can be in decimal or prefixed
- with 0x in hex. Some of these options produce so much
- output that the system is unusable.
-
- The following global components are defined by the
- ACPI CA:
- 0x01 error
- 0x02 warn
- 0x04 init
- 0x08 debug object
- 0x10 info
- 0x20 init names
- 0x40 parse
- 0x80 load
- 0x100 dispatch
- 0x200 execute
- 0x400 names
- 0x800 operation region
- 0x1000 bfield
- 0x2000 tables
- 0x4000 values
- 0x8000 objects
- 0x10000 resources
- 0x20000 user requests
- 0x40000 package
- The number can be in decimal or prefixed with 0x in hex.
- Warning: Many of these options can produce a lot of
- output and make your system unusable. Be very careful.
+ Some values produce so much output that the system is
+ unusable. The "log_buf_len" parameter may be useful
+ if you need to capture more output.
acpi.power_nocheck= [HW,ACPI]
Format: 1/0 enable/disable the check of power state.
diff --git a/MAINTAINERS b/MAINTAINERS
index 7e6a17e..dcbc868 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2185,6 +2185,13 @@
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+INTEL MENLOW THERMAL DRIVER
+P: Sujith Thomas
+M: sujith.thomas@intel.com
+L: linux-acpi@vger.kernel.org
+W: http://www.lesswatts.org/projects/acpi/
+S: Supported
+
INTEL IA32 MICROCODE UPDATE SUPPORT
P: Tigran Aivazian
M: tigran@aivazian.fsnet.co.uk
@@ -3346,7 +3353,9 @@
PNP SUPPORT
P: Adam Belay
-M: ambx1@neo.rr.com
+M: abelay@mit.edu
+P: Bjorn Helgaas
+M: bjorn.helgaas@hp.com
S: Maintained
PNXxxxx I2C DRIVER
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 8d676d8..9830681 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -113,7 +113,6 @@
acpi_pci_disabled = 1;
acpi_noirq_set();
}
-extern int acpi_irq_balance_set(char *str);
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 8c1f76a..4c51a2f 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1343,7 +1343,6 @@
error = acpi_parse_madt_ioapic_entries();
if (!error) {
acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
- acpi_irq_balance_set(NULL);
acpi_ioapic = 1;
smp_found_config = 1;
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index f4f6329..b0243fd 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -312,9 +312,13 @@
bool "Debug Statements"
default n
help
- The ACPI driver can optionally report errors with a great deal
- of verbosity. Saying Y enables these statements. This will increase
- your kernel size by around 50K.
+ The ACPI subsystem can produce debug output. Saying Y enables this
+ output and increases the kernel size by around 50K.
+
+ Use the acpi.debug_layer and acpi.debug_level kernel command-line
+ parameters documented in Documentation/acpi/debug.txt and
+ Documentation/kernel-parameters.txt to control the type and
+ amount of debug output.
config ACPI_DEBUG_FUNC_TRACE
bool "Additionally enable ACPI function tracing"
@@ -324,14 +328,6 @@
ACPI Debug Statements slow down ACPI processing. Function trace
is about half of the penalty and is rarely useful.
-config ACPI_EC
- bool
- default y
- help
- This driver is required on some systems for the proper operation of
- the battery and thermal drivers. If you are compiling for a
- mobile system, say Y.
-
config ACPI_PCI_SLOT
tristate "PCI slot detection driver"
default n
@@ -341,10 +337,6 @@
help you correlate PCI bus addresses with the physical geography
of your slots. If you are unsure, say N.
-config ACPI_POWER
- bool
- default y
-
config ACPI_SYSTEM
bool
default y
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d91c027..fc62231 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -39,7 +39,7 @@
obj-y += bus.o glue.o
obj-y += scan.o
# Keep EC driver first. Initialization of others depend on it.
-obj-$(CONFIG_ACPI_EC) += ec.o
+obj-y += ec.o
obj-$(CONFIG_ACPI_AC) += ac.o
obj-$(CONFIG_ACPI_BATTERY) += battery.o
obj-$(CONFIG_ACPI_BUTTON) += button.o
@@ -51,7 +51,7 @@
obj-$(CONFIG_ACPI_PROCESSOR) += processor.o
obj-$(CONFIG_ACPI_CONTAINER) += container.o
obj-$(CONFIG_ACPI_THERMAL) += thermal.o
-obj-$(CONFIG_ACPI_POWER) += power.o
+obj-y += power.o
obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o
obj-$(CONFIG_ACPI_DEBUG) += debug.o
obj-$(CONFIG_ACPI_NUMA) += numa.o
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index d72a1b6..5cdd713 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -37,7 +37,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_AC_COMPONENT 0x00020000
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_AC_DEVICE_NAME "AC Adapter"
#define ACPI_AC_FILE_STATE "state"
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 71d21c5..63a17b5 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -32,7 +32,6 @@
#include <linux/memory_hotplug.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000UL
#define ACPI_MEMORY_DEVICE_CLASS "memory"
#define ACPI_MEMORY_DEVICE_HID "PNP0C80"
#define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device"
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index b2133e8..47f6e38 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -46,7 +46,6 @@
#define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
-#define ACPI_BATTERY_COMPONENT 0x00040000
#define ACPI_BATTERY_CLASS "battery"
#define ACPI_BATTERY_DEVICE_NAME "Battery"
#define ACPI_BATTERY_NOTIFY_STATUS 0x80
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index c797c64..7edf6d9 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -688,6 +688,14 @@
if (acpi_disabled)
return;
+ /*
+ * ACPI CA initializes acpi_dbg_level to non-zero, which means
+ * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
+ * Turn it off so we don't get output unless the user specifies
+ * acpi.debug_level.
+ */
+ acpi_dbg_level = 0;
+
printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
/* enable workarounds, unless strict ACPI spec. compliance */
@@ -774,7 +782,7 @@
"Unable to initialize ACPI OS objects\n");
goto error1;
}
-#ifdef CONFIG_ACPI_EC
+
/*
* ACPI 2.0 requires the EC driver to be loaded and work before
* the EC device is found in the namespace (i.e. before acpi_initialize_objects()
@@ -785,7 +793,6 @@
*/
status = acpi_ec_ecdt_probe();
/* Ignore result. Not having an ECDT is not fatal. */
-#endif
status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index cb046c3..fd7ca28 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -33,7 +33,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_BUTTON_COMPONENT 0x00080000
#define ACPI_BUTTON_CLASS "button"
#define ACPI_BUTTON_FILE_INFO "info"
#define ACPI_BUTTON_FILE_STATE "state"
diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c
index 4441e84..307963b 100644
--- a/drivers/acpi/cm_sbs.c
+++ b/drivers/acpi/cm_sbs.c
@@ -34,7 +34,6 @@
ACPI_MODULE_NAME("cm_sbs");
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_BATTERY_CLASS "battery"
-#define ACPI_SBS_COMPONENT 0x00080000
#define _COMPONENT ACPI_SBS_COMPONENT
static struct proc_dir_entry *acpi_ac_dir;
static struct proc_dir_entry *acpi_battery_dir;
@@ -105,9 +104,3 @@
return;
}
EXPORT_SYMBOL(acpi_unlock_battery_dir);
-
-static int __init acpi_cm_sbs_init(void)
-{
- return 0;
-}
-subsys_initcall(acpi_cm_sbs_init);
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 134818b..17020c1 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -41,7 +41,6 @@
#define INSTALL_NOTIFY_HANDLER 1
#define UNINSTALL_NOTIFY_HANDLER 2
-#define ACPI_CONTAINER_COMPONENT 0x01000000
#define _COMPONENT ACPI_CONTAINER_COMPONENT
ACPI_MODULE_NAME("container");
diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c
index abf36b4..c483968 100644
--- a/drivers/acpi/debug.c
+++ b/drivers/acpi/debug.c
@@ -44,6 +44,21 @@
ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER),
ACPI_DEBUG_INIT(ACPI_COMPILER),
ACPI_DEBUG_INIT(ACPI_TOOLS),
+
+ ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_AC_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT),
+ ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
};
static const struct acpi_dlevel acpi_debug_levels[] = {
diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
index c5e53aa..f45c74f 100644
--- a/drivers/acpi/events/evgpe.c
+++ b/drivers/acpi/events/evgpe.c
@@ -289,8 +289,6 @@
*/
status = acpi_hw_low_disable_gpe(gpe_event_info);
return_ACPI_STATUS(status);
-
- return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 60d54d1..eaaee16 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -34,7 +34,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_FAN_COMPONENT 0x00200000
#define ACPI_FAN_CLASS "fan"
#define ACPI_FAN_FILE_STATE "state"
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index fcfdef7..e52ad91 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -531,7 +531,7 @@
return 0;
}
-static int acpi_irq_balance; /* 0: static, 1: balance */
+static int acpi_irq_balance = -1; /* 0: static, 1: balance */
static int acpi_pci_link_allocate(struct acpi_pci_link *link)
{
@@ -950,10 +950,17 @@
static int __init acpi_pci_link_init(void)
{
-
if (acpi_noirq)
return 0;
+ if (acpi_irq_balance == -1) {
+ /* no command line switch: enable balancing in IOAPIC mode */
+ if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+ acpi_irq_balance = 1;
+ else
+ acpi_irq_balance = 0;
+ }
+
acpi_link.count = 0;
INIT_LIST_HEAD(&acpi_link.entries);
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 1b8f67d2..642554b 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -376,15 +376,9 @@
static int __init acpi_pci_root_init(void)
{
-
if (acpi_pci_disabled)
return 0;
- /* DEBUG:
- acpi_dbg_layer = ACPI_PCI_COMPONENT;
- acpi_dbg_level = 0xFFFFFFFF;
- */
-
if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0)
return -ENODEV;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index a1718e5..81f583f 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -44,9 +44,8 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define _COMPONENT ACPI_POWER_COMPONENT
+#define _COMPONENT ACPI_POWER_COMPONENT
ACPI_MODULE_NAME("power");
-#define ACPI_POWER_COMPONENT 0x00800000
#define ACPI_POWER_CLASS "power_resource"
#define ACPI_POWER_DEVICE_NAME "Power Resource"
#define ACPI_POWER_FILE_INFO "info"
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 24a362f..105e0ff 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -59,7 +59,6 @@
#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define ACPI_PROCESSOR_DEVICE_NAME "Processor"
#define ACPI_PROCESSOR_FILE_INFO "info"
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 81b40ed..5f8d746 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -59,7 +59,6 @@
#include <acpi/processor.h>
#include <asm/processor.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_idle");
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index dbcf260..0d7b772 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -44,9 +44,9 @@
#endif
#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define ACPI_PROCESSOR_FILE_PERFORMANCE "performance"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index ef34b18..b1eb376 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -40,7 +40,6 @@
#include <acpi/processor.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_thermal");
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 3da2df9..a0c38c9 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -38,9 +38,9 @@
#include <asm/uaccess.h>
#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
-#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_throttling");
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index 755baf2..a6b662c 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -15,28 +15,9 @@
rr = &acpi_gbl_FADT.reset_register;
- /*
- * Is the ACPI reset register supported?
- *
- * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates
- * whether the ACPI reset mechanism is supported.
- *
- * However, some boxes have this bit clear, yet a valid
- * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only
- * mechanism that works for them after S3.
- *
- * This suggests that other operating systems may not be checking
- * the RESET_REG_SUP bit, and are using other means to decide
- * whether to use the ACPI reboot mechanism or not.
- *
- * So when acpi reboot is requested,
- * only the reset_register is checked. If the following
- * conditions are met, it indicates that the reset register is supported.
- * a. reset_register is not zero
- * b. the access width is eight
- * c. the bit_offset is zero
- */
- if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0)
+ /* Is the reset register supported? */
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+ rr->bit_width != 8 || rr->bit_offset != 0)
return;
reset_value = acpi_gbl_FADT.reset_value;
diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
index 2c7885e..2817158 100644
--- a/drivers/acpi/tables/tbfadt.c
+++ b/drivers/acpi/tables/tbfadt.c
@@ -304,7 +304,7 @@
* The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
* offset 45, 55, 95, and the word located at offset 109, 110.
*/
- if (acpi_gbl_FADT.header.revision < 3) {
+ if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) {
acpi_gbl_FADT.preferred_profile = 0;
acpi_gbl_FADT.pstate_control = 0;
acpi_gbl_FADT.cst_control = 0;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index ad6cae9..a6da1d9 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -47,7 +47,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_THERMAL_COMPONENT 0x04000000
#define ACPI_THERMAL_CLASS "thermal_zone"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a29b0cc..a3aad30 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -41,7 +41,6 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_VIDEO_COMPONENT 0x08000000
#define ACPI_VIDEO_CLASS "video"
#define ACPI_VIDEO_BUS_NAME "Video Bus"
#define ACPI_VIDEO_DEVICE_NAME "Video Device"
@@ -2094,12 +2093,6 @@
{
int result = 0;
-
- /*
- acpi_dbg_level = 0xFFFFFFFF;
- acpi_dbg_layer = 0x08000000;
- */
-
acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
if (!acpi_video_dir)
return -ENODEV;
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 2457b07..f437443 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -523,7 +523,7 @@
static int sonypi_ec_write(u8 addr, u8 value)
{
-#ifdef CONFIG_ACPI_EC
+#ifdef CONFIG_ACPI
if (SONYPI_ACPI_ACTIVE)
return ec_write(addr, value);
#endif
@@ -539,7 +539,7 @@
static int sonypi_ec_read(u8 addr, u8 *value)
{
-#ifdef CONFIG_ACPI_EC
+#ifdef CONFIG_ACPI
if (SONYPI_ACPI_ACTIVE)
return ec_read(addr, value);
#endif
diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig
index 108264d..f15e90a 100644
--- a/drivers/idle/Kconfig
+++ b/drivers/idle/Kconfig
@@ -1,5 +1,6 @@
menu "Memory power savings"
+depends on X86_64
config I7300_IDLE_IOAT_CHANNEL
bool
@@ -7,7 +8,7 @@
config I7300_IDLE
tristate "Intel chipset idle memory power saving driver"
select I7300_IDLE_IOAT_CHANNEL
- depends on X86_64 && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
Enable memory power savings when idle with certain Intel server
chipsets. The chipset must have I/O AT support, such as the
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 9494400..4494ad2 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -230,7 +230,7 @@
config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on X86
- depends on ACPI_EC
+ depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is a driver for laptops built by MSI (MICRO-STAR
@@ -260,7 +260,7 @@
config COMPAL_LAPTOP
tristate "Compal Laptop Extras"
depends on X86
- depends on ACPI_EC
+ depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is a driver for laptops built by Compal:
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index d2cf0bf..5ec77ae 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -464,6 +464,14 @@
return 0;
}
+static int dmi_check_cb_s6420(const struct dmi_system_id *id)
+{
+ dmi_check_cb_common(id);
+ fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */
+ fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */
+ return 0;
+}
+
static int dmi_check_cb_p8010(const struct dmi_system_id *id)
{
dmi_check_cb_common(id);
@@ -473,7 +481,7 @@
return 0;
}
-static struct dmi_system_id __initdata fujitsu_dmi_table[] = {
+static struct dmi_system_id fujitsu_dmi_table[] = {
{
.ident = "Fujitsu Siemens S6410",
.matches = {
@@ -482,6 +490,13 @@
},
.callback = dmi_check_cb_s6410},
{
+ .ident = "Fujitsu Siemens S6420",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"),
+ },
+ .callback = dmi_check_cb_s6420},
+ {
.ident = "Fujitsu LifeBook P8010",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c
index e00a275..27b7662 100644
--- a/drivers/misc/intel_menlow.c
+++ b/drivers/misc/intel_menlow.c
@@ -52,6 +52,11 @@
#define MEMORY_ARG_CUR_BANDWIDTH 1
#define MEMORY_ARG_MAX_BANDWIDTH 0
+/*
+ * GTHS returning 'n' would mean that [0,n-1] states are supported
+ * In that case max_cstate would be n-1
+ * GTHS returning '0' would mean that no bandwidth control states are supported
+ */
static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
unsigned long *max_state)
{
@@ -71,6 +76,9 @@
if (ACPI_FAILURE(status))
return -EFAULT;
+ if (!value)
+ return -EINVAL;
+
*max_state = value - 1;
return 0;
}
@@ -121,7 +129,7 @@
if (memory_get_int_max_bandwidth(cdev, &max_state))
return -EFAULT;
- if (max_state < 0 || state > max_state)
+ if (state > max_state)
return -EINVAL;
arg_list.count = 1;
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index cf04c60..e6e9020 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -31,8 +31,24 @@
#define ACPI_MAX_STRING 80
+/*
+ * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt
+ * if you add to this list.
+ */
#define ACPI_BUS_COMPONENT 0x00010000
+#define ACPI_AC_COMPONENT 0x00020000
+#define ACPI_BATTERY_COMPONENT 0x00040000
+#define ACPI_BUTTON_COMPONENT 0x00080000
+#define ACPI_SBS_COMPONENT 0x00100000
+#define ACPI_FAN_COMPONENT 0x00200000
+#define ACPI_PCI_COMPONENT 0x00400000
+#define ACPI_POWER_COMPONENT 0x00800000
+#define ACPI_CONTAINER_COMPONENT 0x01000000
#define ACPI_SYSTEM_COMPONENT 0x02000000
+#define ACPI_THERMAL_COMPONENT 0x04000000
+#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000
+#define ACPI_VIDEO_COMPONENT 0x10000000
+#define ACPI_PROCESSOR_COMPONENT 0x20000000
/*
* _HID definitions
@@ -54,7 +70,6 @@
PCI
-------------------------------------------------------------------------- */
-#define ACPI_PCI_COMPONENT 0x00400000
/* ACPI PCI Interrupt Link (pci_link.c) */
@@ -86,7 +101,6 @@
Power Resource
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_POWER
int acpi_device_sleep_wake(struct acpi_device *dev,
int enable, int sleep_state, int dev_state);
int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state);
@@ -94,15 +108,12 @@
int acpi_power_get_inferred_state(struct acpi_device *device);
int acpi_power_transition(struct acpi_device *device, int state);
extern int acpi_power_nocheck;
-#endif
/* --------------------------------------------------------------------------
Embedded Controller
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_EC
int acpi_ec_ecdt_probe(void);
int acpi_boot_ec_enable(void);
-#endif
/* --------------------------------------------------------------------------
Processor
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index fd6a452..d7846bd 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -163,8 +163,6 @@
int acpi_pci_register_driver(struct acpi_pci_driver *driver);
void acpi_pci_unregister_driver(struct acpi_pci_driver *driver);
-#ifdef CONFIG_ACPI_EC
-
extern int ec_read(u8 addr, u8 *val);
extern int ec_write(u8 addr, u8 val);
extern int ec_transaction(u8 command,
@@ -172,8 +170,6 @@
u8 *rdata, unsigned rdata_len,
int force_poll);
-#endif /*CONFIG_ACPI_EC*/
-
#if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE)
typedef void (*wmi_notify_handler) (u32 value, void *context);