wil6210: reorder init sequence
Need to reorder init sequence to run wil_platform_init
before pci_enable_device. Assumption is platform init
may be required before device may be enabled.
Another issue, platform uninit should be called after
pci_disable_device because platform uninit may render
pci device non-accessible.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index a4417d4..aa3ecc6 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -163,7 +163,6 @@
{
struct wil6210_priv *wil;
struct device *dev = &pdev->dev;
- void __iomem *csr;
int rc;
/* check HW */
@@ -178,9 +177,28 @@
return -ENODEV;
}
+ wil = wil_if_alloc(dev);
+ if (IS_ERR(wil)) {
+ rc = (int)PTR_ERR(wil);
+ dev_err(dev, "wil_if_alloc failed: %d\n", rc);
+ return rc;
+ }
+ wil->pdev = pdev;
+ pci_set_drvdata(pdev, wil);
+ /* rollback to if_free */
+
+ wil->platform_handle =
+ wil_platform_init(&pdev->dev, &wil->platform_ops);
+ if (!wil->platform_handle) {
+ rc = -ENODEV;
+ wil_err(wil, "wil_platform_init failed\n");
+ goto if_free;
+ }
+ /* rollback to err_plat */
+
rc = pci_enable_device(pdev);
if (rc) {
- dev_err(&pdev->dev,
+ wil_err(wil,
"pci_enable_device failed, retry with MSI only\n");
/* Work around for platforms that can't allocate IRQ:
* retry with MSI only
@@ -188,47 +206,37 @@
pdev->msi_enabled = 1;
rc = pci_enable_device(pdev);
}
- if (rc)
- return -ENODEV;
+ if (rc) {
+ wil_err(wil,
+ "pci_enable_device failed, even with MSI only\n");
+ goto err_plat;
+ }
/* rollback to err_disable_pdev */
rc = pci_request_region(pdev, 0, WIL_NAME);
if (rc) {
- dev_err(&pdev->dev, "pci_request_region failed\n");
+ wil_err(wil, "pci_request_region failed\n");
goto err_disable_pdev;
}
/* rollback to err_release_reg */
- csr = pci_ioremap_bar(pdev, 0);
- if (!csr) {
- dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
+ wil->csr = pci_ioremap_bar(pdev, 0);
+ if (!wil->csr) {
+ wil_err(wil, "pci_ioremap_bar failed\n");
rc = -ENODEV;
goto err_release_reg;
}
/* rollback to err_iounmap */
- dev_info(&pdev->dev, "CSR at %pR -> 0x%p\n", &pdev->resource[0], csr);
+ wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);
- wil = wil_if_alloc(dev, csr);
- if (IS_ERR(wil)) {
- rc = (int)PTR_ERR(wil);
- dev_err(dev, "wil_if_alloc failed: %d\n", rc);
- goto err_iounmap;
- }
- /* rollback to if_free */
-
- pci_set_drvdata(pdev, wil);
- wil->pdev = pdev;
wil_set_capabilities(wil);
wil6210_clear_irq(wil);
- wil->platform_handle =
- wil_platform_init(&pdev->dev, &wil->platform_ops);
-
/* FW should raise IRQ when ready */
rc = wil_if_pcie_enable(wil);
if (rc) {
wil_err(wil, "Enable device failed\n");
- goto if_free;
+ goto err_iounmap;
}
/* rollback to bus_disable */
@@ -243,18 +251,19 @@
return 0;
- bus_disable:
+bus_disable:
wil_if_pcie_disable(wil);
- if_free:
+err_iounmap:
+ pci_iounmap(pdev, wil->csr);
+err_release_reg:
+ pci_release_region(pdev, 0);
+err_disable_pdev:
+ pci_disable_device(pdev);
+err_plat:
if (wil->platform_ops.uninit)
wil->platform_ops.uninit(wil->platform_handle);
+if_free:
wil_if_free(wil);
- err_iounmap:
- pci_iounmap(pdev, csr);
- err_release_reg:
- pci_release_region(pdev, 0);
- err_disable_pdev:
- pci_disable_device(pdev);
return rc;
}
@@ -269,12 +278,12 @@
wil6210_debugfs_remove(wil);
wil_if_remove(wil);
wil_if_pcie_disable(wil);
- if (wil->platform_ops.uninit)
- wil->platform_ops.uninit(wil->platform_handle);
- wil_if_free(wil);
pci_iounmap(pdev, csr);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
+ if (wil->platform_ops.uninit)
+ wil->platform_ops.uninit(wil->platform_handle);
+ wil_if_free(wil);
}
static const struct pci_device_id wil6210_pcie_ids[] = {