ath10k: add abstraction layer for peer flags
Abstraction layer for peer flags is added to fix ABI breakage.
Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a7411fe..2ccda0e 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1960,7 +1960,7 @@
ether_addr_copy(arg->addr, sta->addr);
arg->vdev_id = arvif->vdev_id;
arg->peer_aid = aid;
- arg->peer_flags |= WMI_PEER_AUTH;
+ arg->peer_flags |= arvif->ar->wmi.peer_flags->auth;
arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif);
arg->peer_num_spatial_streams = 1;
arg->peer_caps = vif->bss_conf.assoc_capability;
@@ -2002,12 +2002,12 @@
/* FIXME: base on RSN IE/WPA IE is a correct idea? */
if (rsnie || wpaie) {
ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
- arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
+ arg->peer_flags |= ar->wmi.peer_flags->need_ptk_4_way;
}
if (wpaie) {
ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
- arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY;
+ arg->peer_flags |= ar->wmi.peer_flags->need_gtk_2_way;
}
}
@@ -2104,7 +2104,7 @@
ath10k_peer_assoc_h_vht_masked(vht_mcs_mask))
return;
- arg->peer_flags |= WMI_PEER_HT;
+ arg->peer_flags |= ar->wmi.peer_flags->ht;
arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
ht_cap->ampdu_factor)) - 1;
@@ -2115,10 +2115,10 @@
arg->peer_rate_caps |= WMI_RC_HT_FLAG;
if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
- arg->peer_flags |= WMI_PEER_LDPC;
+ arg->peer_flags |= ar->wmi.peer_flags->ldbc;
if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
- arg->peer_flags |= WMI_PEER_40MHZ;
+ arg->peer_flags |= ar->wmi.peer_flags->bw40;
arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
}
@@ -2132,7 +2132,7 @@
if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
- arg->peer_flags |= WMI_PEER_STBC;
+ arg->peer_flags |= ar->wmi.peer_flags->stbc;
}
if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
@@ -2140,7 +2140,7 @@
stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
arg->peer_rate_caps |= stbc;
- arg->peer_flags |= WMI_PEER_STBC;
+ arg->peer_flags |= ar->wmi.peer_flags->stbc;
}
if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
@@ -2321,10 +2321,10 @@
if (ath10k_peer_assoc_h_vht_masked(vht_mcs_mask))
return;
- arg->peer_flags |= WMI_PEER_VHT;
+ arg->peer_flags |= ar->wmi.peer_flags->vht;
if (def.chan->band == IEEE80211_BAND_2GHZ)
- arg->peer_flags |= WMI_PEER_VHT_2G;
+ arg->peer_flags |= ar->wmi.peer_flags->vht_2g;
arg->peer_vht_caps = vht_cap->cap;
@@ -2341,7 +2341,7 @@
ampdu_factor)) - 1);
if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
- arg->peer_flags |= WMI_PEER_80MHZ;
+ arg->peer_flags |= ar->wmi.peer_flags->bw80;
arg->peer_vht_rates.rx_max_rate =
__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
@@ -2366,27 +2366,28 @@
switch (arvif->vdev_type) {
case WMI_VDEV_TYPE_AP:
if (sta->wme)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
if (sta->wme && sta->uapsd_queues) {
- arg->peer_flags |= WMI_PEER_APSD;
+ arg->peer_flags |= arvif->ar->wmi.peer_flags->apsd;
arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
}
break;
case WMI_VDEV_TYPE_STA:
if (vif->bss_conf.qos)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
break;
case WMI_VDEV_TYPE_IBSS:
if (sta->wme)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
break;
default:
break;
}
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
- sta->addr, !!(arg->peer_flags & WMI_PEER_QOS));
+ sta->addr, !!(arg->peer_flags &
+ arvif->ar->wmi.peer_flags->qos));
}
static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta *sta)