Merge branch 'devel-stable' into devel
Conflicts:
arch/arm/mach-pxa/clock.c
arch/arm/mach-pxa/clock.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbf3e..a3fb23b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -364,6 +364,14 @@
help
Support for Freescale MXC/iMX-based family of processors
+config ARCH_MXS
+ bool "Freescale MXS-based"
+ select GENERIC_CLOCKEVENTS
+ select ARCH_REQUIRE_GPIOLIB
+ select COMMON_CLKDEV
+ help
+ Support for Freescale MXS-based family of processors
+
config ARCH_STMP3XXX
bool "Freescale STMP3xxx"
select CPU_ARM926T
@@ -817,6 +825,7 @@
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_CPUFREQ
help
Support for ST-Ericsson's Ux500 architecture
@@ -923,6 +932,8 @@
source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-mxs/Kconfig"
+
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
@@ -1022,8 +1033,8 @@
config IWMMXT
bool "Enable iWMMXt support"
- depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
- default y if PXA27x || PXA3xx || ARCH_MMP
+ depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
+ default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b87aed0..c22c1ad 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -154,10 +154,11 @@
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_MX1) := imx
machine-$(CONFIG_ARCH_MX2) := imx
-machine-$(CONFIG_ARCH_MX25) := mx25
+machine-$(CONFIG_ARCH_MX25) := imx
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
+machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index f0c339f..e648ea3 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -84,6 +84,7 @@
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
+CONFIG_SPI=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index 4d8ae9d..f389b27 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -20,8 +20,8 @@
struct arch_hw_breakpoint {
u32 address;
u32 trigger;
- struct perf_event *suspended_wp;
- struct arch_hw_breakpoint_ctrl ctrl;
+ struct arch_hw_breakpoint_ctrl step_ctrl;
+ struct arch_hw_breakpoint_ctrl ctrl;
};
static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 7c33e6f..185ee82 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -54,6 +54,7 @@
obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
+obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 27f6448..2b46fea 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -178,6 +178,7 @@
@
@ set desired IRQ state, then call main handler
@
+ debug_entry r1
msr cpsr_c, r9
mov r2, sp
bl do_DataAbort
@@ -304,6 +305,7 @@
#else
bl CPU_PABORT_HANDLER
#endif
+ debug_entry r1
msr cpsr_c, r9 @ Maybe enable interrupts
mov r2, sp @ regs
bl do_PrefetchAbort @ call abort handler
@@ -419,6 +421,7 @@
@
@ IRQs on, then call the main handler
@
+ debug_entry r1
enable_irq
mov r2, sp
adr lr, BSYM(ret_from_exception)
@@ -683,6 +686,7 @@
#else
bl CPU_PABORT_HANDLER
#endif
+ debug_entry r1
enable_irq @ Enable interrupts
mov r2, sp @ regs
bl do_PrefetchAbort @ call abort handler
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index d93f976..ae94649 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -165,6 +165,25 @@
.endm
#endif /* !CONFIG_THUMB2_KERNEL */
+ @
+ @ Debug exceptions are taken as prefetch or data aborts.
+ @ We must disable preemption during the handler so that
+ @ we can access the debug registers safely.
+ @
+ .macro debug_entry, fsr
+#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT)
+ ldr r4, =0x40f @ mask out fsr.fs
+ and r5, r4, \fsr
+ cmp r5, #2 @ debug exception
+ bne 1f
+ get_thread_info r10
+ ldr r6, [r10, #TI_PREEMPT] @ get preempt count
+ add r11, r6, #1 @ increment it
+ str r11, [r10, #TI_PREEMPT]
+1:
+#endif
+ .endm
+
/*
* These are the registers used in the syscall handler, and allow us to
* have in theory up to 7 arguments to a function - r0 to r6.
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 21e3a4a..c9f3f04 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -24,6 +24,7 @@
#define pr_fmt(fmt) "hw-breakpoint: " fmt
#include <linux/errno.h>
+#include <linux/hardirq.h>
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/smp.h>
@@ -44,6 +45,7 @@
/* Number of BRP/WRP registers on this CPU. */
static int core_num_brps;
+static int core_num_reserved_brps;
static int core_num_wrps;
/* Debug architecture version. */
@@ -52,87 +54,6 @@
/* Maximum supported watchpoint length. */
static u8 max_watchpoint_len;
-/* Determine number of BRP registers available. */
-static int get_num_brps(void)
-{
- u32 didr;
- ARM_DBG_READ(c0, 0, didr);
- return ((didr >> 24) & 0xf) + 1;
-}
-
-/* Determine number of WRP registers available. */
-static int get_num_wrps(void)
-{
- /*
- * FIXME: When a watchpoint fires, the only way to work out which
- * watchpoint it was is by disassembling the faulting instruction
- * and working out the address of the memory access.
- *
- * Furthermore, we can only do this if the watchpoint was precise
- * since imprecise watchpoints prevent us from calculating register
- * based addresses.
- *
- * For the time being, we only report 1 watchpoint register so we
- * always know which watchpoint fired. In the future we can either
- * add a disassembler and address generation emulator, or we can
- * insert a check to see if the DFAR is set on watchpoint exception
- * entry [the ARM ARM states that the DFAR is UNKNOWN, but
- * experience shows that it is set on some implementations].
- */
-
-#if 0
- u32 didr, wrps;
- ARM_DBG_READ(c0, 0, didr);
- return ((didr >> 28) & 0xf) + 1;
-#endif
-
- return 1;
-}
-
-int hw_breakpoint_slots(int type)
-{
- /*
- * We can be called early, so don't rely on
- * our static variables being initialised.
- */
- switch (type) {
- case TYPE_INST:
- return get_num_brps();
- case TYPE_DATA:
- return get_num_wrps();
- default:
- pr_warning("unknown slot type: %d\n", type);
- return 0;
- }
-}
-
-/* Determine debug architecture. */
-static u8 get_debug_arch(void)
-{
- u32 didr;
-
- /* Do we implement the extended CPUID interface? */
- if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
- pr_warning("CPUID feature registers not supported. "
- "Assuming v6 debug is present.\n");
- return ARM_DEBUG_ARCH_V6;
- }
-
- ARM_DBG_READ(c0, 0, didr);
- return (didr >> 16) & 0xf;
-}
-
-/* Does this core support mismatch breakpoints? */
-static int core_has_mismatch_bps(void)
-{
- return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1;
-}
-
-u8 arch_get_debug_arch(void)
-{
- return debug_arch;
-}
-
#define READ_WB_REG_CASE(OP2, M, VAL) \
case ((OP2 << 4) + M): \
ARM_DBG_READ(c ## M, OP2, VAL); \
@@ -210,6 +131,94 @@
isb();
}
+/* Determine debug architecture. */
+static u8 get_debug_arch(void)
+{
+ u32 didr;
+
+ /* Do we implement the extended CPUID interface? */
+ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+ pr_warning("CPUID feature registers not supported. "
+ "Assuming v6 debug is present.\n");
+ return ARM_DEBUG_ARCH_V6;
+ }
+
+ ARM_DBG_READ(c0, 0, didr);
+ return (didr >> 16) & 0xf;
+}
+
+u8 arch_get_debug_arch(void)
+{
+ return debug_arch;
+}
+
+/* Determine number of BRP register available. */
+static int get_num_brp_resources(void)
+{
+ u32 didr;
+ ARM_DBG_READ(c0, 0, didr);
+ return ((didr >> 24) & 0xf) + 1;
+}
+
+/* Does this core support mismatch breakpoints? */
+static int core_has_mismatch_brps(void)
+{
+ return (get_debug_arch() >= ARM_DEBUG_ARCH_V7_ECP14 &&
+ get_num_brp_resources() > 1);
+}
+
+/* Determine number of usable WRPs available. */
+static int get_num_wrps(void)
+{
+ /*
+ * FIXME: When a watchpoint fires, the only way to work out which
+ * watchpoint it was is by disassembling the faulting instruction
+ * and working out the address of the memory access.
+ *
+ * Furthermore, we can only do this if the watchpoint was precise
+ * since imprecise watchpoints prevent us from calculating register
+ * based addresses.
+ *
+ * Providing we have more than 1 breakpoint register, we only report
+ * a single watchpoint register for the time being. This way, we always
+ * know which watchpoint fired. In the future we can either add a
+ * disassembler and address generation emulator, or we can insert a
+ * check to see if the DFAR is set on watchpoint exception entry
+ * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
+ * that it is set on some implementations].
+ */
+
+#if 0
+ int wrps;
+ u32 didr;
+ ARM_DBG_READ(c0, 0, didr);
+ wrps = ((didr >> 28) & 0xf) + 1;
+#endif
+ int wrps = 1;
+
+ if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
+ wrps = get_num_brp_resources() - 1;
+
+ return wrps;
+}
+
+/* We reserve one breakpoint for each watchpoint. */
+static int get_num_reserved_brps(void)
+{
+ if (core_has_mismatch_brps())
+ return get_num_wrps();
+ return 0;
+}
+
+/* Determine number of usable BRPs available. */
+static int get_num_brps(void)
+{
+ int brps = get_num_brp_resources();
+ if (core_has_mismatch_brps())
+ brps -= get_num_reserved_brps();
+ return brps;
+}
+
/*
* In order to access the breakpoint/watchpoint control registers,
* we must be running in debug monitor mode. Unfortunately, we can
@@ -230,8 +239,12 @@
goto out;
}
+ /* If monitor mode is already enabled, just return. */
+ if (dscr & ARM_DSCR_MDBGEN)
+ goto out;
+
/* Write to the corresponding DSCR. */
- switch (debug_arch) {
+ switch (get_debug_arch()) {
case ARM_DEBUG_ARCH_V6:
case ARM_DEBUG_ARCH_V6_1:
ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
@@ -246,15 +259,30 @@
/* Check that the write made it through. */
ARM_DBG_READ(c1, 0, dscr);
- if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN),
- "failed to enable monitor mode.")) {
+ if (!(dscr & ARM_DSCR_MDBGEN))
ret = -EPERM;
- }
out:
return ret;
}
+int hw_breakpoint_slots(int type)
+{
+ /*
+ * We can be called early, so don't rely on
+ * our static variables being initialised.
+ */
+ switch (type) {
+ case TYPE_INST:
+ return get_num_brps();
+ case TYPE_DATA:
+ return get_num_wrps();
+ default:
+ pr_warning("unknown slot type: %d\n", type);
+ return 0;
+ }
+}
+
/*
* Check if 8-bit byte-address select is available.
* This clobbers WRP 0.
@@ -268,9 +296,6 @@
if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14)
goto out;
- if (enable_monitor_mode())
- goto out;
-
memset(&ctrl, 0, sizeof(ctrl));
ctrl.len = ARM_BREAKPOINT_LEN_8;
ctrl_reg = encode_ctrl_reg(ctrl);
@@ -290,23 +315,6 @@
}
/*
- * Handler for reactivating a suspended watchpoint when the single
- * step `mismatch' breakpoint is triggered.
- */
-static void wp_single_step_handler(struct perf_event *bp, int unused,
- struct perf_sample_data *data,
- struct pt_regs *regs)
-{
- perf_event_enable(counter_arch_bp(bp)->suspended_wp);
- unregister_hw_breakpoint(bp);
-}
-
-static int bp_is_single_step(struct perf_event *bp)
-{
- return bp->overflow_handler == wp_single_step_handler;
-}
-
-/*
* Install a perf counter breakpoint.
*/
int arch_install_hw_breakpoint(struct perf_event *bp)
@@ -314,30 +322,41 @@
struct arch_hw_breakpoint *info = counter_arch_bp(bp);
struct perf_event **slot, **slots;
int i, max_slots, ctrl_base, val_base, ret = 0;
+ u32 addr, ctrl;
/* Ensure that we are in monitor mode and halting mode is disabled. */
ret = enable_monitor_mode();
if (ret)
goto out;
+ addr = info->address;
+ ctrl = encode_ctrl_reg(info->ctrl) | 0x1;
+
if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
/* Breakpoint */
ctrl_base = ARM_BASE_BCR;
val_base = ARM_BASE_BVR;
- slots = __get_cpu_var(bp_on_reg);
- max_slots = core_num_brps - 1;
-
- if (bp_is_single_step(bp)) {
- info->ctrl.mismatch = 1;
- i = max_slots;
- slots[i] = bp;
- goto setup;
+ slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+ max_slots = core_num_brps;
+ if (info->step_ctrl.enabled) {
+ /* Override the breakpoint data with the step data. */
+ addr = info->trigger & ~0x3;
+ ctrl = encode_ctrl_reg(info->step_ctrl);
}
} else {
/* Watchpoint */
- ctrl_base = ARM_BASE_WCR;
- val_base = ARM_BASE_WVR;
- slots = __get_cpu_var(wp_on_reg);
+ if (info->step_ctrl.enabled) {
+ /* Install into the reserved breakpoint region. */
+ ctrl_base = ARM_BASE_BCR + core_num_brps;
+ val_base = ARM_BASE_BVR + core_num_brps;
+ /* Override the watchpoint data with the step data. */
+ addr = info->trigger & ~0x3;
+ ctrl = encode_ctrl_reg(info->step_ctrl);
+ } else {
+ ctrl_base = ARM_BASE_WCR;
+ val_base = ARM_BASE_WVR;
+ }
+ slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -355,12 +374,11 @@
goto out;
}
-setup:
/* Setup the address register. */
- write_wb_reg(val_base + i, info->address);
+ write_wb_reg(val_base + i, addr);
/* Setup the control register. */
- write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1);
+ write_wb_reg(ctrl_base + i, ctrl);
out:
return ret;
@@ -375,18 +393,15 @@
if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
/* Breakpoint */
base = ARM_BASE_BCR;
- slots = __get_cpu_var(bp_on_reg);
- max_slots = core_num_brps - 1;
-
- if (bp_is_single_step(bp)) {
- i = max_slots;
- slots[i] = NULL;
- goto reset;
- }
+ slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+ max_slots = core_num_brps;
} else {
/* Watchpoint */
- base = ARM_BASE_WCR;
- slots = __get_cpu_var(wp_on_reg);
+ if (info->step_ctrl.enabled)
+ base = ARM_BASE_BCR + core_num_brps;
+ else
+ base = ARM_BASE_WCR;
+ slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -403,7 +418,6 @@
if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot"))
return;
-reset:
/* Reset the control register. */
write_wb_reg(base + i, 0);
}
@@ -537,12 +551,23 @@
return -EINVAL;
}
+ /*
+ * Breakpoints must be of length 2 (thumb) or 4 (ARM) bytes.
+ * Watchpoints can be of length 1, 2, 4 or 8 bytes if supported
+ * by the hardware and must be aligned to the appropriate number of
+ * bytes.
+ */
+ if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE &&
+ info->ctrl.len != ARM_BREAKPOINT_LEN_2 &&
+ info->ctrl.len != ARM_BREAKPOINT_LEN_4)
+ return -EINVAL;
+
/* Address */
info->address = bp->attr.bp_addr;
/* Privilege */
info->ctrl.privilege = ARM_BREAKPOINT_USER;
- if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp))
+ if (arch_check_bp_in_kernelspace(bp))
info->ctrl.privilege |= ARM_BREAKPOINT_PRIV;
/* Enabled? */
@@ -561,7 +586,7 @@
{
struct arch_hw_breakpoint *info = counter_arch_bp(bp);
int ret = 0;
- u32 bytelen, max_len, offset, alignment_mask = 0x3;
+ u32 offset, alignment_mask = 0x3;
/* Build the arch_hw_breakpoint. */
ret = arch_build_bp_info(bp);
@@ -571,84 +596,85 @@
/* Check address alignment. */
if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
alignment_mask = 0x7;
- if (info->address & alignment_mask) {
- /*
- * Try to fix the alignment. This may result in a length
- * that is too large, so we must check for that.
- */
- bytelen = get_hbp_len(info->ctrl.len);
- max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 :
- max_watchpoint_len;
-
- if (max_len >= 8)
- offset = info->address & 0x7;
- else
- offset = info->address & 0x3;
-
- if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) {
- ret = -EFBIG;
- goto out;
- }
-
- info->ctrl.len <<= offset;
- info->address &= ~offset;
-
- pr_debug("breakpoint alignment fixup: length = 0x%x, "
- "address = 0x%x\n", info->ctrl.len, info->address);
+ offset = info->address & alignment_mask;
+ switch (offset) {
+ case 0:
+ /* Aligned */
+ break;
+ case 1:
+ /* Allow single byte watchpoint. */
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+ break;
+ case 2:
+ /* Allow halfword watchpoints and breakpoints. */
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
+ break;
+ default:
+ ret = -EINVAL;
+ goto out;
}
+ info->address &= ~alignment_mask;
+ info->ctrl.len <<= offset;
+
/*
* Currently we rely on an overflow handler to take
* care of single-stepping the breakpoint when it fires.
* In the case of userspace breakpoints on a core with V7 debug,
- * we can use the mismatch feature as a poor-man's hardware single-step.
+ * we can use the mismatch feature as a poor-man's hardware
+ * single-step, but this only works for per-task breakpoints.
*/
if (WARN_ONCE(!bp->overflow_handler &&
- (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()),
+ (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
+ || !bp->hw.bp_target),
"overflow handler required but none found")) {
ret = -EINVAL;
- goto out;
}
out:
return ret;
}
-static void update_mismatch_flag(int idx, int flag)
+/*
+ * Enable/disable single-stepping over the breakpoint bp at address addr.
+ */
+static void enable_single_step(struct perf_event *bp, u32 addr)
{
- struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]);
- struct arch_hw_breakpoint *info;
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- if (bp == NULL)
- return;
+ arch_uninstall_hw_breakpoint(bp);
+ info->step_ctrl.mismatch = 1;
+ info->step_ctrl.len = ARM_BREAKPOINT_LEN_4;
+ info->step_ctrl.type = ARM_BREAKPOINT_EXECUTE;
+ info->step_ctrl.privilege = info->ctrl.privilege;
+ info->step_ctrl.enabled = 1;
+ info->trigger = addr;
+ arch_install_hw_breakpoint(bp);
+}
- info = counter_arch_bp(bp);
-
- /* Update the mismatch field to enter/exit `single-step' mode */
- if (!bp->overflow_handler && info->ctrl.mismatch != flag) {
- info->ctrl.mismatch = flag;
- write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1);
- }
+static void disable_single_step(struct perf_event *bp)
+{
+ arch_uninstall_hw_breakpoint(bp);
+ counter_arch_bp(bp)->step_ctrl.enabled = 0;
+ arch_install_hw_breakpoint(bp);
}
static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
{
int i;
- struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg);
+ struct perf_event *wp, **slots;
struct arch_hw_breakpoint *info;
- struct perf_event_attr attr;
+
+ slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
/* Without a disassembler, we can only handle 1 watchpoint. */
BUG_ON(core_num_wrps > 1);
- hw_breakpoint_init(&attr);
- attr.bp_addr = regs->ARM_pc & ~0x3;
- attr.bp_len = HW_BREAKPOINT_LEN_4;
- attr.bp_type = HW_BREAKPOINT_X;
-
for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
- if (slots[i] == NULL) {
+ wp = slots[i];
+
+ if (wp == NULL) {
rcu_read_unlock();
continue;
}
@@ -658,87 +684,121 @@
* single watchpoint, we can set the trigger to the lowest
* possible faulting address.
*/
- info = counter_arch_bp(slots[i]);
- info->trigger = slots[i]->attr.bp_addr;
+ info = counter_arch_bp(wp);
+ info->trigger = wp->attr.bp_addr;
pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
- perf_bp_event(slots[i], regs);
+ perf_bp_event(wp, regs);
/*
* If no overflow handler is present, insert a temporary
* mismatch breakpoint so we can single-step over the
* watchpoint trigger.
*/
- if (!slots[i]->overflow_handler) {
- bp = register_user_hw_breakpoint(&attr,
- wp_single_step_handler,
- current);
- counter_arch_bp(bp)->suspended_wp = slots[i];
- perf_event_disable(slots[i]);
- }
+ if (!wp->overflow_handler)
+ enable_single_step(wp, instruction_pointer(regs));
rcu_read_unlock();
}
}
+static void watchpoint_single_step_handler(unsigned long pc)
+{
+ int i;
+ struct perf_event *wp, **slots;
+ struct arch_hw_breakpoint *info;
+
+ slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+
+ for (i = 0; i < core_num_reserved_brps; ++i) {
+ rcu_read_lock();
+
+ wp = slots[i];
+
+ if (wp == NULL)
+ goto unlock;
+
+ info = counter_arch_bp(wp);
+ if (!info->step_ctrl.enabled)
+ goto unlock;
+
+ /*
+ * Restore the original watchpoint if we've completed the
+ * single-step.
+ */
+ if (info->trigger != pc)
+ disable_single_step(wp);
+
+unlock:
+ rcu_read_unlock();
+ }
+}
+
static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
{
int i;
- int mismatch;
u32 ctrl_reg, val, addr;
- struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg);
+ struct perf_event *bp, **slots;
struct arch_hw_breakpoint *info;
struct arch_hw_breakpoint_ctrl ctrl;
+ slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+
/* The exception entry code places the amended lr in the PC. */
addr = regs->ARM_pc;
+ /* Check the currently installed breakpoints first. */
for (i = 0; i < core_num_brps; ++i) {
rcu_read_lock();
bp = slots[i];
- if (bp == NULL) {
- rcu_read_unlock();
- continue;
- }
+ if (bp == NULL)
+ goto unlock;
- mismatch = 0;
+ info = counter_arch_bp(bp);
/* Check if the breakpoint value matches. */
val = read_wb_reg(ARM_BASE_BVR + i);
if (val != (addr & ~0x3))
- goto unlock;
+ goto mismatch;
/* Possible match, check the byte address select to confirm. */
ctrl_reg = read_wb_reg(ARM_BASE_BCR + i);
decode_ctrl_reg(ctrl_reg, &ctrl);
if ((1 << (addr & 0x3)) & ctrl.len) {
- mismatch = 1;
- info = counter_arch_bp(bp);
info->trigger = addr;
- }
-
-unlock:
- if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) {
pr_debug("breakpoint fired: address = 0x%x\n", addr);
perf_bp_event(bp, regs);
+ if (!bp->overflow_handler)
+ enable_single_step(bp, addr);
+ goto unlock;
}
- update_mismatch_flag(i, mismatch);
+mismatch:
+ /* If we're stepping a breakpoint, it can now be restored. */
+ if (info->step_ctrl.enabled)
+ disable_single_step(bp);
+unlock:
rcu_read_unlock();
}
+
+ /* Handle any pending watchpoint single-step breakpoints. */
+ watchpoint_single_step_handler(addr);
}
/*
* Called from either the Data Abort Handler [watchpoint] or the
- * Prefetch Abort Handler [breakpoint].
+ * Prefetch Abort Handler [breakpoint] with preemption disabled.
*/
static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
- int ret = 1; /* Unhandled fault. */
+ int ret = 0;
u32 dscr;
+ /* We must be called with preemption disabled. */
+ WARN_ON(preemptible());
+
/* We only handle watchpoints and hardware breakpoints. */
ARM_DBG_READ(c1, 0, dscr);
@@ -753,25 +813,47 @@
watchpoint_handler(addr, regs);
break;
default:
- goto out;
+ ret = 1; /* Unhandled fault. */
}
- ret = 0;
-out:
+ /*
+ * Re-enable preemption after it was disabled in the
+ * low-level exception handling code.
+ */
+ preempt_enable();
+
return ret;
}
/*
* One-time initialisation.
*/
-static void __init reset_ctrl_regs(void *unused)
+static void reset_ctrl_regs(void *unused)
{
int i;
+ /*
+ * v7 debug contains save and restore registers so that debug state
+ * can be maintained across low-power modes without leaving
+ * the debug logic powered up. It is IMPLEMENTATION DEFINED whether
+ * we can write to the debug registers out of reset, so we must
+ * unlock the OS Lock Access Register to avoid taking undefined
+ * instruction exceptions later on.
+ */
+ if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+ /*
+ * Unconditionally clear the lock by writing a value
+ * other than 0xC5ACCE55 to the access register.
+ */
+ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+ isb();
+ }
+
if (enable_monitor_mode())
return;
- for (i = 0; i < core_num_brps; ++i) {
+ /* We must also reset any reserved registers. */
+ for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
write_wb_reg(ARM_BASE_BCR + i, 0UL);
write_wb_reg(ARM_BASE_BVR + i, 0UL);
}
@@ -782,45 +864,57 @@
}
}
+static int __cpuinit dbg_reset_notify(struct notifier_block *self,
+ unsigned long action, void *cpu)
+{
+ if (action == CPU_ONLINE)
+ smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata dbg_reset_nb = {
+ .notifier_call = dbg_reset_notify,
+};
+
static int __init arch_hw_breakpoint_init(void)
{
- int ret = 0;
u32 dscr;
debug_arch = get_debug_arch();
if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
- ret = -ENODEV;
- goto out;
+ return 0;
}
/* Determine how many BRPs/WRPs are available. */
core_num_brps = get_num_brps();
+ core_num_reserved_brps = get_num_reserved_brps();
core_num_wrps = get_num_wrps();
pr_info("found %d breakpoint and %d watchpoint registers.\n",
- core_num_brps, core_num_wrps);
+ core_num_brps + core_num_reserved_brps, core_num_wrps);
- if (core_has_mismatch_bps())
- pr_info("1 breakpoint reserved for watchpoint single-step.\n");
+ if (core_num_reserved_brps)
+ pr_info("%d breakpoint(s) reserved for watchpoint "
+ "single-step.\n", core_num_reserved_brps);
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
pr_warning("halting debug mode enabled. Assuming maximum "
"watchpoint size of 4 bytes.");
} else {
- /* Work out the maximum supported watchpoint length. */
- max_watchpoint_len = get_max_wp_len();
- pr_info("maximum watchpoint size is %u bytes.\n",
- max_watchpoint_len);
-
/*
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
smp_call_function(reset_ctrl_regs, NULL, 1);
reset_ctrl_regs(NULL);
+
+ /* Work out the maximum supported watchpoint length. */
+ max_watchpoint_len = get_max_wp_len();
+ pr_info("maximum watchpoint size is %u bytes.\n",
+ max_watchpoint_len);
}
/* Register debug fault handler. */
@@ -829,8 +923,9 @@
hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
"breakpoint debug exception");
-out:
- return ret;
+ /* Register hotplug notifier. */
+ register_cpu_notifier(&dbg_reset_nb);
+ return 0;
}
arch_initcall(arch_hw_breakpoint_init);
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index b63b528..7fa3bb0 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -19,6 +19,14 @@
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
+#if defined(CONFIG_CPU_PJ4)
+#define PJ4(code...) code
+#define XSC(code...)
+#else
+#define PJ4(code...)
+#define XSC(code...) code
+#endif
+
#define MMX_WR0 (0x00)
#define MMX_WR1 (0x08)
#define MMX_WR2 (0x10)
@@ -58,11 +66,17 @@
ENTRY(iwmmxt_task_enable)
- mrc p15, 0, r2, c15, c1, 0
- tst r2, #0x3 @ CP0 and CP1 accessible?
+ XSC(mrc p15, 0, r2, c15, c1, 0)
+ PJ4(mrc p15, 0, r2, c1, c0, 2)
+ @ CP0 and CP1 accessible?
+ XSC(tst r2, #0x3)
+ PJ4(tst r2, #0xf)
movne pc, lr @ if so no business here
- orr r2, r2, #0x3 @ enable access to CP0 and CP1
- mcr p15, 0, r2, c15, c1, 0
+ @ enable access to CP0 and CP1
+ XSC(orr r2, r2, #0x3)
+ XSC(mcr p15, 0, r2, c15, c1, 0)
+ PJ4(orr r2, r2, #0xf)
+ PJ4(mcr p15, 0, r2, c1, c0, 2)
ldr r3, =concan_owner
add r0, r10, #TI_IWMMXT_STATE @ get task Concan save area
@@ -179,17 +193,26 @@
teqne r1, r2 @ or specified one?
bne 1f @ no: quit
- mrc p15, 0, r4, c15, c1, 0
- orr r4, r4, #0x3 @ enable access to CP0 and CP1
- mcr p15, 0, r4, c15, c1, 0
+ @ enable access to CP0 and CP1
+ XSC(mrc p15, 0, r4, c15, c1, 0)
+ XSC(orr r4, r4, #0xf)
+ XSC(mcr p15, 0, r4, c15, c1, 0)
+ PJ4(mrc p15, 0, r4, c1, c0, 2)
+ PJ4(orr r4, r4, #0x3)
+ PJ4(mcr p15, 0, r4, c1, c0, 2)
+
mov r0, #0 @ nothing to load
str r0, [r3] @ no more current owner
mrc p15, 0, r2, c2, c0, 0
mov r2, r2 @ cpwait
bl concan_save
- bic r4, r4, #0x3 @ disable access to CP0 and CP1
- mcr p15, 0, r4, c15, c1, 0
+ @ disable access to CP0 and CP1
+ XSC(bic r4, r4, #0x3)
+ XSC(mcr p15, 0, r4, c15, c1, 0)
+ PJ4(bic r4, r4, #0xf)
+ PJ4(mcr p15, 0, r4, c1, c0, 2)
+
mrc p15, 0, r2, c2, c0, 0
mov r2, r2 @ cpwait
@@ -277,8 +300,11 @@
*/
ENTRY(iwmmxt_task_switch)
- mrc p15, 0, r1, c15, c1, 0
- tst r1, #0x3 @ CP0 and CP1 accessible?
+ XSC(mrc p15, 0, r1, c15, c1, 0)
+ PJ4(mrc p15, 0, r1, c1, c0, 2)
+ @ CP0 and CP1 accessible?
+ XSC(tst r1, #0x3)
+ PJ4(tst r1, #0xf)
bne 1f @ yes: block them for next task
ldr r2, =concan_owner
@@ -287,8 +313,11 @@
teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
-1: eor r1, r1, #3 @ flip Concan access
- mcr p15, 0, r1, c15, c1, 0
+1: @ flip Conan access
+ XSC(eor r1, r1, #0x3)
+ XSC(mcr p15, 0, r1, c15, c1, 0)
+ PJ4(eor r1, r1, #0xf)
+ PJ4(mcr p15, 0, r1, c1, c0, 2)
mrc p15, 0, r1, c2, c0, 0
sub pc, lr, r1, lsr #32 @ cpwait and return
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 421a4bb..624e2a5 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -32,7 +32,7 @@
* Hardware lock to serialize accesses to PMU registers. Needed for the
* read/modify/write sequences.
*/
-DEFINE_SPINLOCK(pmu_lock);
+static DEFINE_RAW_SPINLOCK(pmu_lock);
/*
* ARMv6 supports a maximum of 3 events, starting from index 1. If we add
@@ -65,7 +65,7 @@
*/
unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
};
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
struct arm_pmu {
enum arm_perf_pmu_ids id;
@@ -673,17 +673,17 @@
* This code has been adapted from the ARM OProfile support.
*/
struct frame_tail {
- struct frame_tail *fp;
- unsigned long sp;
- unsigned long lr;
+ struct frame_tail __user *fp;
+ unsigned long sp;
+ unsigned long lr;
} __attribute__((packed));
/*
* Get the return address for a single stackframe and return a pointer to the
* next frame tail.
*/
-static struct frame_tail *
-user_backtrace(struct frame_tail *tail,
+static struct frame_tail __user *
+user_backtrace(struct frame_tail __user *tail,
struct perf_callchain_entry *entry)
{
struct frame_tail buftail;
@@ -709,10 +709,10 @@
void
perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
{
- struct frame_tail *tail;
+ struct frame_tail __user *tail;
- tail = (struct frame_tail *)regs->ARM_fp - 1;
+ tail = (struct frame_tail __user *)regs->ARM_fp - 1;
while (tail && !((unsigned long)tail & 0x3))
tail = user_backtrace(tail, entry);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 7aeb07d..c058bfc 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -400,7 +400,7 @@
WARN_ONCE(1, "invalid counter number (%d)\n", counter);
}
-void
+static void
armv6pmu_enable_event(struct hw_perf_event *hwc,
int idx)
{
@@ -426,12 +426,12 @@
* Mask out the current event and set the counter to count the event
* that we're interested in.
*/
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static irqreturn_t
@@ -500,11 +500,11 @@
{
unsigned long flags, val;
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = armv6_pmcr_read();
val |= ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static void
@@ -512,11 +512,11 @@
{
unsigned long flags, val;
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static int
@@ -570,12 +570,12 @@
* of ETM bus signal assertion cycles. The external reporting should
* be disabled and so this should never increment.
*/
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static void
@@ -599,12 +599,12 @@
* Unlike UP ARMv6, we don't have a way of stopping the counters. We
* simply disable the interrupt reporting.
*/
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static const struct arm_pmu armv6pmu = {
@@ -625,7 +625,7 @@
.max_period = (1LLU << 32) - 1,
};
-const struct arm_pmu *__init armv6pmu_init(void)
+static const struct arm_pmu *__init armv6pmu_init(void)
{
return &armv6pmu;
}
@@ -655,17 +655,17 @@
.max_period = (1LLU << 32) - 1,
};
-const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return &armv6mpcore_pmu;
}
#else
-const struct arm_pmu *__init armv6pmu_init(void)
+static const struct arm_pmu *__init armv6pmu_init(void)
{
return NULL;
}
-const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 4d04239..2e14025 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -681,7 +681,7 @@
}
#endif
-void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
+static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
@@ -689,7 +689,7 @@
* Enable counter and interrupt, and set the counter to count
* the event that we're interested in.
*/
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
/*
* Disable counter
@@ -713,7 +713,7 @@
*/
armv7_pmnc_enable_counter(idx);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
@@ -723,7 +723,7 @@
/*
* Disable counter and interrupt
*/
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
/*
* Disable counter
@@ -735,7 +735,7 @@
*/
armv7_pmnc_disable_intens(idx);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
@@ -805,20 +805,20 @@
{
unsigned long flags;
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
/* Enable all counters */
armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static void armv7pmu_stop(void)
{
unsigned long flags;
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
/* Disable all counters */
armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
@@ -874,7 +874,7 @@
return nb_cnt + 1;
}
-const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static const struct arm_pmu *__init armv7_a8_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA8;
armv7pmu.name = "ARMv7 Cortex-A8";
@@ -884,7 +884,7 @@
return &armv7pmu;
}
-const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static const struct arm_pmu *__init armv7_a9_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA9;
armv7pmu.name = "ARMv7 Cortex-A9";
@@ -894,12 +894,12 @@
return &armv7pmu;
}
#else
-const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static const struct arm_pmu *__init armv7_a8_pmu_init(void)
{
return NULL;
}
-const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static const struct arm_pmu *__init armv7_a9_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 4e95927..28cd3b0 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -291,12 +291,12 @@
return;
}
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static void
@@ -322,12 +322,12 @@
return;
}
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static int
@@ -355,11 +355,11 @@
{
unsigned long flags, val;
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val |= XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static void
@@ -367,11 +367,11 @@
{
unsigned long flags, val;
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static inline u32
@@ -428,7 +428,7 @@
.max_period = (1LLU << 32) - 1,
};
-const struct arm_pmu *__init xscale1pmu_init(void)
+static const struct arm_pmu *__init xscale1pmu_init(void)
{
return &xscale1pmu;
}
@@ -635,10 +635,10 @@
return;
}
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static void
@@ -678,10 +678,10 @@
return;
}
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static int
@@ -705,11 +705,11 @@
{
unsigned long flags, val;
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
val |= XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static void
@@ -717,11 +717,11 @@
{
unsigned long flags, val;
- spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&pmu_lock, flags);
val = xscale2pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
}
static inline u32
@@ -790,17 +790,17 @@
.max_period = (1LLU << 32) - 1,
};
-const struct arm_pmu *__init xscale2pmu_init(void)
+static const struct arm_pmu *__init xscale2pmu_init(void)
{
return &xscale2pmu;
}
#else
-const struct arm_pmu *__init xscale1pmu_init(void)
+static const struct arm_pmu *__init xscale1pmu_init(void)
{
return NULL;
}
-const struct arm_pmu *__init xscale2pmu_init(void)
+static const struct arm_pmu *__init xscale2pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
new file mode 100644
index 0000000..a4b1b07
--- /dev/null
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -0,0 +1,94 @@
+/*
+ * linux/arch/arm/kernel/pj4-cp0.c
+ *
+ * PJ4 iWMMXt coprocessor context switching and handling
+ *
+ * Copyright (c) 2010 Marvell International Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/thread_notify.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+ struct thread_info *thread = t;
+
+ switch (cmd) {
+ case THREAD_NOTIFY_FLUSH:
+ /*
+ * flush_thread() zeroes thread->fpstate, so no need
+ * to do anything here.
+ *
+ * FALLTHROUGH: Ensure we don't try to overwrite our newly
+ * initialised state information on the first fault.
+ */
+
+ case THREAD_NOTIFY_EXIT:
+ iwmmxt_task_release(thread);
+ break;
+
+ case THREAD_NOTIFY_SWITCH:
+ iwmmxt_task_switch(thread);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+ .notifier_call = iwmmxt_do,
+};
+
+
+static u32 __init pj4_cp_access_read(void)
+{
+ u32 value;
+
+ __asm__ __volatile__ (
+ "mrc p15, 0, %0, c1, c0, 2\n\t"
+ : "=r" (value));
+ return value;
+}
+
+static void __init pj4_cp_access_write(u32 value)
+{
+ u32 temp;
+
+ __asm__ __volatile__ (
+ "mcr p15, 0, %1, c1, c0, 2\n\t"
+ "mrc p15, 0, %0, c1, c0, 2\n\t"
+ "mov %0, %0\n\t"
+ "sub pc, pc, #4\n\t"
+ : "=r" (temp) : "r" (value));
+}
+
+
+/*
+ * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
+ * switch code handle iWMMXt context switching.
+ */
+static int __init pj4_cp0_init(void)
+{
+ u32 cp_access;
+
+ cp_access = pj4_cp_access_read() & ~0xf;
+ pj4_cp_access_write(cp_access);
+
+ printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n");
+ elf_hwcap |= HWCAP_IWMMXT;
+ thread_register_notifier(&iwmmxt_notifier_block);
+
+ return 0;
+}
+
+late_initcall(pj4_cp0_init);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 3e97483..19c6816 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -1060,8 +1060,8 @@
goto out;
if ((gen_type & implied_type) != gen_type) {
- ret = -EINVAL;
- goto out;
+ ret = -EINVAL;
+ goto out;
}
attr.bp_len = gen_len;
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 90fe9ab..08e5c87 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
@@ -108,10 +109,63 @@
}
/*
+ * USB
+ */
+static struct resource cns3xxx_usb_ehci_resources[] = {
+ [0] = {
+ .start = CNS3XXX_USB_BASE,
+ .end = CNS3XXX_USB_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CNS3XXX_USB_EHCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_usb_ehci_device = {
+ .name = "cns3xxx-ehci",
+ .num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
+ .resource = cns3xxx_usb_ehci_resources,
+ .dev = {
+ .dma_mask = &cns3xxx_usb_ehci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource cns3xxx_usb_ohci_resources[] = {
+ [0] = {
+ .start = CNS3XXX_USB_OHCI_BASE,
+ .end = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CNS3XXX_USB_OHCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_usb_ohci_device = {
+ .name = "cns3xxx-ohci",
+ .num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
+ .resource = cns3xxx_usb_ohci_resources,
+ .dev = {
+ .dma_mask = &cns3xxx_usb_ohci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/*
* Initialization
*/
static struct platform_device *cns3420_pdevs[] __initdata = {
&cns3420_nor_pdev,
+ &cns3xxx_usb_ehci_device,
+ &cns3xxx_usb_ohci_device,
};
static void __init cns3420_init(void)
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index ef9e511..ffeb3a8 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -16,7 +16,5 @@
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
index 50b4d31..79d1fb0 100644
--- a/arch/arm/mach-cns3xxx/devices.c
+++ b/arch/arm/mach-cns3xxx/devices.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <mach/cns3xxx.h>
#include <mach/irqs.h>
+#include <mach/pm.h>
#include "core.h"
#include "devices.h"
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 6dbce13..191c8e5 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -165,7 +165,6 @@
#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000
#define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */
-#define CNS3XXX_USB_BASE_VIRT 0xFFF16000
#define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */
#define CNS3XXX_SATA2_SIZE SZ_16M
@@ -184,7 +183,6 @@
#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000
#define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */
-#define CNS3XXX_USB_OHCI_BASE_VIRT 0xFFF1C000
#define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */
#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000
diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h
new file mode 100644
index 0000000..6eae7f7
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2004 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_PM_H
+#define __CNS3XXX_PM_H
+
+#include <asm/atomic.h>
+
+void cns3xxx_pwr_clk_en(unsigned int block);
+void cns3xxx_pwr_clk_dis(unsigned int block);
+void cns3xxx_pwr_power_up(unsigned int block);
+void cns3xxx_pwr_power_down(unsigned int block);
+
+extern atomic_t usb_pwr_ref;
+
+#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 38e4470..5e57955 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,10 +6,14 @@
* published by the Free Software Foundation.
*/
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <asm/atomic.h>
#include <mach/system.h>
#include <mach/cns3xxx.h>
+#include <mach/pm.h>
void cns3xxx_pwr_clk_en(unsigned int block)
{
@@ -18,6 +22,16 @@
reg |= (block & PM_CLK_GATE_REG_MASK);
__raw_writel(reg, PM_CLK_GATE_REG);
}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
+
+void cns3xxx_pwr_clk_dis(unsigned int block)
+{
+ u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+ reg &= ~(block & PM_CLK_GATE_REG_MASK);
+ __raw_writel(reg, PM_CLK_GATE_REG);
+}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
void cns3xxx_pwr_power_up(unsigned int block)
{
@@ -29,6 +43,7 @@
/* Wait for 300us for the PLL output clock locked. */
udelay(300);
};
+EXPORT_SYMBOL(cns3xxx_pwr_power_up);
void cns3xxx_pwr_power_down(unsigned int block)
{
@@ -38,6 +53,7 @@
reg |= (block & CNS3XXX_PWR_PLL_ALL);
__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
};
+EXPORT_SYMBOL(cns3xxx_pwr_power_down);
static void cns3xxx_pwr_soft_rst_force(unsigned int block)
{
@@ -51,11 +67,13 @@
reg &= ~(block & PM_SOFT_RST_REG_MASK);
} else {
reg &= ~(block & PM_SOFT_RST_REG_MASK);
+ __raw_writel(reg, PM_SOFT_RST_REG);
reg |= (block & PM_SOFT_RST_REG_MASK);
}
__raw_writel(reg, PM_SOFT_RST_REG);
}
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
void cns3xxx_pwr_soft_rst(unsigned int block)
{
@@ -69,6 +87,7 @@
}
cns3xxx_pwr_soft_rst_force(block);
}
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
void arch_reset(char mode, const char *cmd)
{
@@ -99,3 +118,7 @@
return cpu;
}
+EXPORT_SYMBOL(cns3xxx_cpu_clock);
+
+atomic_t usb_pwr_ref = ATOMIC_INIT(0);
+EXPORT_SYMBOL(usb_pwr_ref);
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index b77b860..32f1479 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -61,6 +61,8 @@
bool "TI DM644x EVM"
default ARCH_DAVINCI_DM644x
depends on ARCH_DAVINCI_DM644x
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Configure this option to specify the whether the board used
for development is a DM644x EVM
@@ -68,6 +70,8 @@
config MACH_SFFSDR
bool "Lyrtech SFFSDR"
depends on ARCH_DAVINCI_DM644x
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
@@ -99,6 +103,8 @@
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
select MACH_DAVINCI_DM6467TEVM
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
@@ -110,6 +116,8 @@
bool "TI DM365 EVM"
default ARCH_DAVINCI_DM365
depends on ARCH_DAVINCI_DM365
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Configure this option to specify whether the board used
for development is a DM365 EVM
@@ -119,6 +127,8 @@
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
select GPIO_PCF857X
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
@@ -148,7 +158,6 @@
bool "TI DA850/OMAP-L138/AM18x Reference Platform"
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
- select GPIO_PCA953X
help
Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
@@ -178,6 +187,12 @@
endchoice
+config GPIO_PCA953X
+ default MACH_DAVINCI_DA850_EVM
+
+config KEYBOARD_GPIO_POLLED
+ default MACH_DAVINCI_DA850_EVM
+
config MACH_TNETV107X
bool "TI TNETV107X Reference Platform"
default ARCH_DAVINCI_TNETV107X
@@ -188,6 +203,8 @@
config MACH_MITYOMAPL138
bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
depends on ARCH_DAVINCI_DA850
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
System on Module. Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
index 9c3f500..1ce70a9 100644
--- a/arch/arm/mach-davinci/aemif.c
+++ b/arch/arm/mach-davinci/aemif.c
@@ -90,7 +90,7 @@
void __iomem *base, unsigned cs)
{
unsigned set, val;
- unsigned ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
+ int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
unsigned offset = A1CR_OFFSET + cs * 4;
struct clk *aemif_clk;
unsigned long clkrate;
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index c6e11c6..b01fb2a 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,8 +17,10 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
+#include <linux/input.h>
#include <linux/mfd/tps6507x.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -266,34 +268,115 @@
struct davinci_soc_info *soc_info = &davinci_soc_info;
soc_info->emac_pdata->rmii_en = 1;
- gpio_set_value(rmii_sel, 0);
+ gpio_set_value_cansleep(rmii_sel, 0);
}
#else
static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
#endif
+
+#define DA850_KEYS_DEBOUNCE_MS 10
+/*
+ * At 200ms polling interval it is possible to miss an
+ * event by tapping very lightly on the push button but most
+ * pushes do result in an event; longer intervals require the
+ * user to hold the button whereas shorter intervals require
+ * more CPU time for polling.
+ */
+#define DA850_GPIO_KEYS_POLL_MS 200
+
+enum da850_evm_ui_exp_pins {
+ DA850_EVM_UI_EXP_SEL_C = 5,
+ DA850_EVM_UI_EXP_SEL_B,
+ DA850_EVM_UI_EXP_SEL_A,
+ DA850_EVM_UI_EXP_PB8,
+ DA850_EVM_UI_EXP_PB7,
+ DA850_EVM_UI_EXP_PB6,
+ DA850_EVM_UI_EXP_PB5,
+ DA850_EVM_UI_EXP_PB4,
+ DA850_EVM_UI_EXP_PB3,
+ DA850_EVM_UI_EXP_PB2,
+ DA850_EVM_UI_EXP_PB1,
+};
+
+static const char const *da850_evm_ui_exp[] = {
+ [DA850_EVM_UI_EXP_SEL_C] = "sel_c",
+ [DA850_EVM_UI_EXP_SEL_B] = "sel_b",
+ [DA850_EVM_UI_EXP_SEL_A] = "sel_a",
+ [DA850_EVM_UI_EXP_PB8] = "pb8",
+ [DA850_EVM_UI_EXP_PB7] = "pb7",
+ [DA850_EVM_UI_EXP_PB6] = "pb6",
+ [DA850_EVM_UI_EXP_PB5] = "pb5",
+ [DA850_EVM_UI_EXP_PB4] = "pb4",
+ [DA850_EVM_UI_EXP_PB3] = "pb3",
+ [DA850_EVM_UI_EXP_PB2] = "pb2",
+ [DA850_EVM_UI_EXP_PB1] = "pb1",
+};
+
+#define DA850_N_UI_PB 8
+
+static struct gpio_keys_button da850_evm_ui_keys[] = {
+ [0 ... DA850_N_UI_PB - 1] = {
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
+ .code = -1, /* assigned at runtime */
+ .gpio = -1, /* assigned at runtime */
+ .desc = NULL, /* assigned at runtime */
+ },
+};
+
+static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
+ .buttons = da850_evm_ui_keys,
+ .nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
+ .poll_interval = DA850_GPIO_KEYS_POLL_MS,
+};
+
+static struct platform_device da850_evm_ui_keys_device = {
+ .name = "gpio-keys-polled",
+ .id = 0,
+ .dev = {
+ .platform_data = &da850_evm_ui_keys_pdata
+ },
+};
+
+static void da850_evm_ui_keys_init(unsigned gpio)
+{
+ int i;
+ struct gpio_keys_button *button;
+
+ for (i = 0; i < DA850_N_UI_PB; i++) {
+ button = &da850_evm_ui_keys[i];
+ button->code = KEY_F8 - i;
+ button->desc = (char *)
+ da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
+ button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
+ }
+}
+
static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
unsigned ngpio, void *c)
{
int sel_a, sel_b, sel_c, ret;
- sel_a = gpio + 7;
- sel_b = gpio + 6;
- sel_c = gpio + 5;
+ sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
+ sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
+ sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
- ret = gpio_request(sel_a, "sel_a");
+ ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_a);
goto exp_setup_sela_fail;
}
- ret = gpio_request(sel_b, "sel_b");
+ ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_b);
goto exp_setup_selb_fail;
}
- ret = gpio_request(sel_c, "sel_c");
+ ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_c);
goto exp_setup_selc_fail;
@@ -304,6 +387,13 @@
gpio_direction_output(sel_b, 1);
gpio_direction_output(sel_c, 1);
+ da850_evm_ui_keys_init(gpio);
+ ret = platform_device_register(&da850_evm_ui_keys_device);
+ if (ret) {
+ pr_warning("Could not register UI GPIO expander push-buttons");
+ goto exp_setup_keys_fail;
+ }
+
ui_card_detected = 1;
pr_info("DA850/OMAP-L138 EVM UI card detected\n");
@@ -313,6 +403,8 @@
return 0;
+exp_setup_keys_fail:
+ gpio_free(sel_c);
exp_setup_selc_fail:
gpio_free(sel_b);
exp_setup_selb_fail:
@@ -324,14 +416,192 @@
static int da850_evm_ui_expander_teardown(struct i2c_client *client,
unsigned gpio, unsigned ngpio, void *c)
{
- /* deselect all functionalities */
- gpio_set_value(gpio + 5, 1);
- gpio_set_value(gpio + 6, 1);
- gpio_set_value(gpio + 7, 1);
+ platform_device_unregister(&da850_evm_ui_keys_device);
- gpio_free(gpio + 5);
- gpio_free(gpio + 6);
- gpio_free(gpio + 7);
+ /* deselect all functionalities */
+ gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
+ gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
+ gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
+
+ gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
+ gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
+ gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
+
+ return 0;
+}
+
+/* assign the baseboard expander's GPIOs after the UI board's */
+#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
+#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
+
+enum da850_evm_bb_exp_pins {
+ DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
+ DA850_EVM_BB_EXP_SW_RST,
+ DA850_EVM_BB_EXP_TP_23,
+ DA850_EVM_BB_EXP_TP_22,
+ DA850_EVM_BB_EXP_TP_21,
+ DA850_EVM_BB_EXP_USER_PB1,
+ DA850_EVM_BB_EXP_USER_LED2,
+ DA850_EVM_BB_EXP_USER_LED1,
+ DA850_EVM_BB_EXP_USER_SW1,
+ DA850_EVM_BB_EXP_USER_SW2,
+ DA850_EVM_BB_EXP_USER_SW3,
+ DA850_EVM_BB_EXP_USER_SW4,
+ DA850_EVM_BB_EXP_USER_SW5,
+ DA850_EVM_BB_EXP_USER_SW6,
+ DA850_EVM_BB_EXP_USER_SW7,
+ DA850_EVM_BB_EXP_USER_SW8
+};
+
+static const char const *da850_evm_bb_exp[] = {
+ [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en",
+ [DA850_EVM_BB_EXP_SW_RST] = "sw_rst",
+ [DA850_EVM_BB_EXP_TP_23] = "tp_23",
+ [DA850_EVM_BB_EXP_TP_22] = "tp_22",
+ [DA850_EVM_BB_EXP_TP_21] = "tp_21",
+ [DA850_EVM_BB_EXP_USER_PB1] = "user_pb1",
+ [DA850_EVM_BB_EXP_USER_LED2] = "user_led2",
+ [DA850_EVM_BB_EXP_USER_LED1] = "user_led1",
+ [DA850_EVM_BB_EXP_USER_SW1] = "user_sw1",
+ [DA850_EVM_BB_EXP_USER_SW2] = "user_sw2",
+ [DA850_EVM_BB_EXP_USER_SW3] = "user_sw3",
+ [DA850_EVM_BB_EXP_USER_SW4] = "user_sw4",
+ [DA850_EVM_BB_EXP_USER_SW5] = "user_sw5",
+ [DA850_EVM_BB_EXP_USER_SW6] = "user_sw6",
+ [DA850_EVM_BB_EXP_USER_SW7] = "user_sw7",
+ [DA850_EVM_BB_EXP_USER_SW8] = "user_sw8",
+};
+
+#define DA850_N_BB_USER_SW 8
+
+static struct gpio_keys_button da850_evm_bb_keys[] = {
+ [0] = {
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
+ .code = KEY_PROG1,
+ .desc = NULL, /* assigned at runtime */
+ .gpio = -1, /* assigned at runtime */
+ },
+ [1 ... DA850_N_BB_USER_SW] = {
+ .type = EV_SW,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
+ .code = -1, /* assigned at runtime */
+ .desc = NULL, /* assigned at runtime */
+ .gpio = -1, /* assigned at runtime */
+ },
+};
+
+static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
+ .buttons = da850_evm_bb_keys,
+ .nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
+ .poll_interval = DA850_GPIO_KEYS_POLL_MS,
+};
+
+static struct platform_device da850_evm_bb_keys_device = {
+ .name = "gpio-keys-polled",
+ .id = 1,
+ .dev = {
+ .platform_data = &da850_evm_bb_keys_pdata
+ },
+};
+
+static void da850_evm_bb_keys_init(unsigned gpio)
+{
+ int i;
+ struct gpio_keys_button *button;
+
+ button = &da850_evm_bb_keys[0];
+ button->desc = (char *)
+ da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
+ button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
+
+ for (i = 0; i < DA850_N_BB_USER_SW; i++) {
+ button = &da850_evm_bb_keys[i + 1];
+ button->code = SW_LID + i;
+ button->desc = (char *)
+ da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
+ button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
+ }
+}
+
+#define DA850_N_BB_USER_LED 2
+
+static struct gpio_led da850_evm_bb_leds[] = {
+ [0 ... DA850_N_BB_USER_LED - 1] = {
+ .active_low = 1,
+ .gpio = -1, /* assigned at runtime */
+ .name = NULL, /* assigned at runtime */
+ },
+};
+
+static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
+ .leds = da850_evm_bb_leds,
+ .num_leds = ARRAY_SIZE(da850_evm_bb_leds),
+};
+
+static struct platform_device da850_evm_bb_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_evm_bb_leds_pdata
+ }
+};
+
+static void da850_evm_bb_leds_init(unsigned gpio)
+{
+ int i;
+ struct gpio_led *led;
+
+ for (i = 0; i < DA850_N_BB_USER_LED; i++) {
+ led = &da850_evm_bb_leds[i];
+
+ led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
+ led->name =
+ da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
+ }
+}
+
+static int da850_evm_bb_expander_setup(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio,
+ void *c)
+{
+ int ret;
+
+ /*
+ * Register the switches and pushbutton on the baseboard as a gpio-keys
+ * device.
+ */
+ da850_evm_bb_keys_init(gpio);
+ ret = platform_device_register(&da850_evm_bb_keys_device);
+ if (ret) {
+ pr_warning("Could not register baseboard GPIO expander keys");
+ goto io_exp_setup_sw_fail;
+ }
+
+ da850_evm_bb_leds_init(gpio);
+ ret = platform_device_register(&da850_evm_bb_leds_device);
+ if (ret) {
+ pr_warning("Could not register baseboard GPIO expander LEDS");
+ goto io_exp_setup_leds_fail;
+ }
+
+ return 0;
+
+io_exp_setup_leds_fail:
+ platform_device_unregister(&da850_evm_bb_keys_device);
+io_exp_setup_sw_fail:
+ return ret;
+}
+
+static int da850_evm_bb_expander_teardown(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio, void *c)
+{
+ platform_device_unregister(&da850_evm_bb_leds_device);
+ platform_device_unregister(&da850_evm_bb_keys_device);
return 0;
}
@@ -340,6 +610,14 @@
.gpio_base = DAVINCI_N_GPIO,
.setup = da850_evm_ui_expander_setup,
.teardown = da850_evm_ui_expander_teardown,
+ .names = da850_evm_ui_exp,
+};
+
+static struct pca953x_platform_data da850_evm_bb_expander_info = {
+ .gpio_base = DA850_BB_EXPANDER_GPIO_BASE,
+ .setup = da850_evm_bb_expander_setup,
+ .teardown = da850_evm_bb_expander_teardown,
+ .names = da850_evm_bb_exp,
};
static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
@@ -350,6 +628,10 @@
I2C_BOARD_INFO("tca6416", 0x20),
.platform_data = &da850_evm_ui_expander_info,
},
+ {
+ I2C_BOARD_INFO("tca6416", 0x21),
+ .platform_data = &da850_evm_bb_expander_info,
+ },
};
static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@@ -540,7 +822,7 @@
{
.constraints = {
.min_uV = 950000,
- .max_uV = 1320000,
+ .max_uV = 1350000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
@@ -591,7 +873,7 @@
.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
};
-static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
+static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
.platform_data = &tps_board,
@@ -600,8 +882,8 @@
static int __init pmic_tps65070_init(void)
{
- return i2c_register_board_info(1, da850evm_tps65070_info,
- ARRAY_SIZE(da850evm_tps65070_info));
+ return i2c_register_board_info(1, da850_evm_tps65070_info,
+ ARRAY_SIZE(da850_evm_tps65070_info));
}
static const short da850_evm_lcdc_pins[] = {
@@ -736,6 +1018,27 @@
&da850_edma_cc1_rsv,
};
+#ifdef CONFIG_CPU_FREQ
+static __init int da850_evm_init_cpufreq(void)
+{
+ switch (system_rev & 0xF) {
+ case 3:
+ da850_max_speed = 456000;
+ break;
+ case 2:
+ da850_max_speed = 408000;
+ break;
+ case 1:
+ da850_max_speed = 372000;
+ break;
+ }
+
+ return da850_register_cpufreq("pll0_sysclk3");
+}
+#else
+static __init int da850_evm_init_cpufreq(void) { return 0; }
+#endif
+
static __init void da850_evm_init(void)
{
int ret;
@@ -836,7 +1139,7 @@
if (ret)
pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
- ret = da850_register_cpufreq("pll0_sysclk3");
+ ret = da850_evm_init_cpufreq();
if (ret)
pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
ret);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 01ba080..e4e3af1 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -336,7 +336,7 @@
ratio--;
}
- if (ratio > PLLDIV_RATIO_MASK)
+ if (ratio > pll->div_ratio_mask)
return -EINVAL;
do {
@@ -344,7 +344,7 @@
} while (v & PLLSTAT_GOSTAT);
v = __raw_readl(pll->base + clk->div_reg);
- v &= ~PLLDIV_RATIO_MASK;
+ v &= ~pll->div_ratio_mask;
v |= ratio | PLLDIV_EN;
__raw_writel(v, pll->base + clk->div_reg);
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 63916b9..78b5ae2 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -830,8 +830,7 @@
* According to the TRM, minimum PLLM results in maximum power savings.
* The OPP definitions below should keep the PLLM as low as possible.
*
- * The output of the PLLM must be between 400 to 600 MHz.
- * This rules out prediv of anything but divide-by-one for 24Mhz OSC input.
+ * The output of the PLLM must be between 300 to 600 MHz.
*/
struct da850_opp {
unsigned int freq; /* in KHz */
@@ -842,6 +841,33 @@
unsigned int cvdd_max; /* in uV */
};
+static const struct da850_opp da850_opp_456 = {
+ .freq = 456000,
+ .prediv = 1,
+ .mult = 19,
+ .postdiv = 1,
+ .cvdd_min = 1300000,
+ .cvdd_max = 1350000,
+};
+
+static const struct da850_opp da850_opp_408 = {
+ .freq = 408000,
+ .prediv = 1,
+ .mult = 17,
+ .postdiv = 1,
+ .cvdd_min = 1300000,
+ .cvdd_max = 1350000,
+};
+
+static const struct da850_opp da850_opp_372 = {
+ .freq = 372000,
+ .prediv = 2,
+ .mult = 31,
+ .postdiv = 1,
+ .cvdd_min = 1200000,
+ .cvdd_max = 1320000,
+};
+
static const struct da850_opp da850_opp_300 = {
.freq = 300000,
.prediv = 1,
@@ -876,6 +902,9 @@
}
static struct cpufreq_frequency_table da850_freq_table[] = {
+ OPP(456),
+ OPP(408),
+ OPP(372),
OPP(300),
OPP(200),
OPP(96),
@@ -886,6 +915,19 @@
};
#ifdef CONFIG_REGULATOR
+static int da850_set_voltage(unsigned int index);
+static int da850_regulator_init(void);
+#endif
+
+static struct davinci_cpufreq_config cpufreq_info = {
+ .freq_table = da850_freq_table,
+#ifdef CONFIG_REGULATOR
+ .init = da850_regulator_init,
+ .set_voltage = da850_set_voltage,
+#endif
+};
+
+#ifdef CONFIG_REGULATOR
static struct regulator *cvdd;
static int da850_set_voltage(unsigned int index)
@@ -895,7 +937,7 @@
if (!cvdd)
return -ENODEV;
- opp = (struct da850_opp *) da850_freq_table[index].index;
+ opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
}
@@ -912,14 +954,6 @@
}
#endif
-static struct davinci_cpufreq_config cpufreq_info = {
- .freq_table = &da850_freq_table[0],
-#ifdef CONFIG_REGULATOR
- .init = da850_regulator_init,
- .set_voltage = da850_set_voltage,
-#endif
-};
-
static struct platform_device da850_cpufreq_device = {
.name = "cpufreq-davinci",
.dev = {
@@ -928,12 +962,22 @@
.id = -1,
};
+unsigned int da850_max_speed = 300000;
+
int __init da850_register_cpufreq(char *async_clk)
{
+ int i;
+
/* cpufreq driver can help keep an "async" clock constant */
if (async_clk)
clk_add_alias("async", da850_cpufreq_device.name,
async_clk, NULL);
+ for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
+ if (da850_freq_table[i].frequency <= da850_max_speed) {
+ cpufreq_info.freq_table = &da850_freq_table[i];
+ break;
+ }
+ }
return platform_device_register(&da850_cpufreq_device);
}
@@ -942,17 +986,18 @@
{
int i, ret = 0, diff;
unsigned int best = (unsigned int) -1;
+ struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
rate /= 1000; /* convert to kHz */
- for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
- diff = da850_freq_table[i].frequency - rate;
+ for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ diff = table[i].frequency - rate;
if (diff < 0)
diff = -diff;
if (diff < best) {
best = diff;
- ret = da850_freq_table[i].frequency;
+ ret = table[i].frequency;
}
}
@@ -973,7 +1018,7 @@
struct pll_data *pll = clk->pll_data;
int ret;
- opp = (struct da850_opp *) da850_freq_table[index].index;
+ opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
prediv = opp->prediv;
mult = opp->mult;
postdiv = opp->postdiv;
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index c9a86d8..85503deb 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -344,7 +344,20 @@
void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
{
- int i;
+ int i, error;
+ struct clk *tsc_clk;
+
+ /*
+ * The reset defaults for tnetv107x tsc clock divider is set too high.
+ * This forces the clock down to a range that allows the ADC to
+ * complete sample conversion in time.
+ */
+ tsc_clk = clk_get(NULL, "sys_tsc_clk");
+ if (tsc_clk) {
+ error = clk_set_rate(tsc_clk, 5000000);
+ WARN_ON(error < 0);
+ clk_put(tsc_clk);
+ }
platform_device_register(&edma_device);
platform_device_register(&tnetv107x_wdt_device);
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 4247b3f..e7f9520 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -28,6 +28,13 @@
extern void __iomem *da8xx_syscfg1_base;
/*
+ * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
+ * (than the regular 300Mhz variant), the board code should set this up
+ * with the supported speed before calling da850_register_cpufreq().
+ */
+extern unsigned int da850_max_speed;
+
+/*
* The cp_intc interrupt controller for the da8xx isn't in the same
* chunk of physical memory space as the other registers (like it is
* on the davincis) so it needs to be mapped separately. It will be
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1b15dbd..a415804 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -83,21 +83,16 @@
pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
__raw_writel(pdctl1, psc_base + PDCTL1);
-
- do {
- ptstat = __raw_readl(psc_base +
- PTSTAT);
- } while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
__raw_writel(ptcmd, psc_base + PTCMD);
-
- do {
- ptstat = __raw_readl(psc_base + PTSTAT);
- } while (!(((ptstat >> domain) & 1) == 0));
}
do {
+ ptstat = __raw_readl(psc_base + PTSTAT);
+ } while (!(((ptstat >> domain) & 1) == 0));
+
+ do {
mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index c148671..e1969ce 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -272,14 +272,35 @@
return (cycles_t)timer32_read(t);
}
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t read_dummy(struct clocksource *cs)
+{
+ return 0;
+}
+
+
static struct clocksource clocksource_davinci = {
.rating = 300,
- .read = read_cycles,
+ .read = read_dummy,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
+ * Overwrite weak default sched_clock with something more precise
+ */
+unsigned long long notrace sched_clock(void)
+{
+ const cycle_t cyc = clocksource_davinci.read(&clocksource_davinci);
+
+ return clocksource_cyc2ns(cyc, clocksource_davinci.mult,
+ clocksource_davinci.shift);
+}
+
+/*
* clockevent
*/
static int davinci_set_next_event(unsigned long cycles,
@@ -376,6 +397,7 @@
davinci_clock_tick_rate = clk_get_rate(timer_clk);
/* setup clocksource */
+ clocksource_davinci.read = read_cycles;
clocksource_davinci.name = id_to_name[clocksource_id];
if (clocksource_register_hz(&clocksource_davinci,
davinci_clock_tick_rate))
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index daeae06..6fcdece 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -131,12 +131,13 @@
define_pll_clk(eth, 2, 0x0ff, 0x400);
/* Level 2 - divided outputs from the PLLs */
-#define define_pll_div_clk(pll, cname, div) \
- static struct clk pll##_##cname##_clk = { \
- .name = #pll "_" #cname "_clk",\
- .parent = &pll_##pll##_clk, \
- .flags = CLK_PLL, \
- .div_reg = PLLDIV##div, \
+#define define_pll_div_clk(pll, cname, div) \
+ static struct clk pll##_##cname##_clk = { \
+ .name = #pll "_" #cname "_clk", \
+ .parent = &pll_##pll##_clk, \
+ .flags = CLK_PLL, \
+ .div_reg = PLLDIV##div, \
+ .set_rate = davinci_set_sysclk_rate, \
}
define_pll_div_clk(sys, arm1176, 1);
@@ -192,6 +193,7 @@
lpsc_clk_enabled(ddr2_vrst, sys_ddr_clk, DDR2_EMIF1_VRST);
lpsc_clk_enabled(ddr2_vctl_rst, sys_ddr_clk, DDR2_EMIF2_VCTL_RST);
lpsc_clk_enabled(wdt_arm, sys_half_clk, WDT_ARM);
+lpsc_clk_enabled(timer1, sys_half_clk, TIMER1);
lpsc_clk(mbx_lite, sys_arm1176_clk, MBX_LITE);
lpsc_clk(ethss, eth_125mhz_clk, ETHSS);
@@ -205,16 +207,15 @@
lpsc_clk(sdio0, sys_half_clk, SDIO0);
lpsc_clk(sdio1, sys_half_clk, SDIO1);
lpsc_clk(timer0, sys_half_clk, TIMER0);
-lpsc_clk(timer1, sys_half_clk, TIMER1);
lpsc_clk(wdt_dsp, sys_half_clk, WDT_DSP);
lpsc_clk(ssp, sys_half_clk, SSP);
lpsc_clk(tdm0, tdm_0_clk, TDM0);
lpsc_clk(tdm1, tdm_1_clk, TDM1);
lpsc_clk(vlynq, sys_vlynq_ref_clk, VLYNQ);
lpsc_clk(mcdma, sys_half_clk, MCDMA);
-lpsc_clk(usb0, sys_half_clk, USB0);
-lpsc_clk(usb1, sys_half_clk, USB1);
lpsc_clk(usbss, sys_half_clk, USBSS);
+lpsc_clk(usb0, clk_usbss, USB0);
+lpsc_clk(usb1, clk_usbss, USB1);
lpsc_clk(ethss_rgmii, eth_250mhz_clk, ETHSS_RGMII);
lpsc_clk(imcop, sys_dsp_clk, IMCOP);
lpsc_clk(spare, sys_half_clk, SPARE);
@@ -281,7 +282,9 @@
CLK(NULL, "clk_tdm0", &clk_tdm0),
CLK(NULL, "clk_vlynq", &clk_vlynq),
CLK(NULL, "clk_mcdma", &clk_mcdma),
+ CLK(NULL, "clk_usbss", &clk_usbss),
CLK(NULL, "clk_usb0", &clk_usb0),
+ CLK(NULL, "clk_usb1", &clk_usb1),
CLK(NULL, "clk_tdm1", &clk_tdm1),
CLK(NULL, "clk_debugss", &clk_debugss),
CLK(NULL, "clk_ethss_rgmii", &clk_ethss_rgmii),
@@ -289,8 +292,6 @@
CLK(NULL, "clk_imcop", &clk_imcop),
CLK(NULL, "clk_spare", &clk_spare),
CLK("davinci_mmc.1", NULL, &clk_sdio1),
- CLK(NULL, "clk_usb1", &clk_usb1),
- CLK(NULL, "clk_usbss", &clk_usbss),
CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst),
CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst),
CLK(NULL, NULL, NULL),
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 3b9a32a..a4ed390 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -9,6 +9,12 @@
Say 'Y' here if you want your kernel to support the
Marvell DB-MV88AP510 Development Board.
+ config MACH_CM_A510
+ bool "CompuLab CM-A510 Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ CompuLab CM-A510 Board.
+
endmenu
endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index 7ab3be5..fa0f018 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,3 +1,4 @@
-obj-y += common.o addr-map.o irq.o pcie.o
+obj-y += common.o addr-map.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
+obj-$(CONFIG_MACH_CM_A510) += cm-a510.o
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
new file mode 100644
index 0000000..96e0e94
--- /dev/null
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -0,0 +1,95 @@
+/*
+ * arch/arm/mach-dove/cm-a510.c
+ *
+ * Copyright (C) 2010 CompuLab, Ltd.
+ * Konstantin Sinyuk <kostyas@compulab.co.il>
+ *
+ * Based on Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dove.h>
+
+#include "common.h"
+
+static struct mv643xx_eth_platform_data cm_a510_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data cm_a510_sata_data = {
+ .n_ports = 1,
+};
+
+/*
+ * SPI Devices:
+ * SPI0: 1M Flash Winbond w25q32bv
+ */
+static const struct flash_platform_data cm_a510_spi_flash_data = {
+ .type = "w25q32bv",
+};
+
+static struct spi_board_info __initdata cm_a510_spi_flash_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &cm_a510_spi_flash_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static int __init cm_a510_pci_init(void)
+{
+ if (machine_is_cm_a510())
+ dove_pcie_init(1, 1);
+
+ return 0;
+}
+
+subsys_initcall(cm_a510_pci_init);
+
+/* Board Init */
+static void __init cm_a510_init(void)
+{
+ /*
+ * Basic Dove setup. Needs to be called early.
+ */
+ dove_init();
+
+ dove_ge00_init(&cm_a510_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_sata_init(&cm_a510_sata_data);
+ dove_sdio0_init();
+ dove_sdio1_init();
+ dove_spi0_init();
+ dove_spi1_init();
+ dove_uart0_init();
+ dove_uart1_init();
+ dove_i2c_init();
+ spi_register_board_info(cm_a510_spi_flash_info,
+ ARRAY_SIZE(cm_a510_spi_flash_info));
+}
+
+MACHINE_START(CM_A510, "Compulab CM-A510 Board")
+ .boot_params = 0x00000100,
+ .init_machine = cm_a510_init,
+ .map_io = dove_map_io,
+ .init_irq = dove_init_irq,
+ .timer = &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index f6a0839..27b4145 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -131,14 +131,21 @@
#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
#define DOVE_NAND_GPIO_EN (1 << 0)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
-
+#define DOVE_SPI_GPIO_SEL (1 << 5)
+#define DOVE_UART1_GPIO_SEL (1 << 4)
+#define DOVE_AU1_GPIO_SEL (1 << 3)
+#define DOVE_CAM_GPIO_SEL (1 << 2)
+#define DOVE_SD1_GPIO_SEL (1 << 1)
+#define DOVE_SD0_GPIO_SEL (1 << 0)
/* Power Management */
#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c)
/* Real Time Clock */
#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
index 0ee70ff..340bb7a 100644
--- a/arch/arm/mach-dove/include/mach/gpio.h
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -14,12 +14,14 @@
#include <plat/gpio.h>
#include <asm-generic/gpio.h> /* cansleep wrappers */
-#define GPIO_MAX 64
+#define GPIO_MAX 72
#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
-#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : \
+ ((pin < 64) ? GPIO_BASE_HI : \
+ DOVE_GPIO2_VIRT_BASE))
#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
new file mode 100644
index 0000000..71db2bd
--- /dev/null
+++ b/arch/arm/mach-dove/mpp.c
@@ -0,0 +1,212 @@
+/*
+ * arch/arm/mach-dove/mpp.c
+ *
+ * MPP functions for Marvell Dove SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/dove.h>
+
+#include "mpp.h"
+
+#define MPP_NR_REGS 4
+#define MPP_CTRL(i) ((i) == 3 ? \
+ DOVE_MPP_CTRL4_VIRT_BASE : \
+ DOVE_MPP_VIRT_BASE + (i) * 4)
+#define PMU_SIG_REGS 2
+#define PMU_SIG_CTRL(i) (DOVE_PMU_SIG_CTRL + (i) * 4)
+
+struct dove_mpp_grp {
+ int start;
+ int end;
+};
+
+static struct dove_mpp_grp dove_mpp_grp[] = {
+ [MPP_24_39] = {
+ .start = 24,
+ .end = 39,
+ },
+ [MPP_40_45] = {
+ .start = 40,
+ .end = 45,
+ },
+ [MPP_46_51] = {
+ .start = 40,
+ .end = 45,
+ },
+ [MPP_58_61] = {
+ .start = 58,
+ .end = 61,
+ },
+ [MPP_62_63] = {
+ .start = 62,
+ .end = 63,
+ },
+};
+
+static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
+{
+ int i;
+
+ for (i = start; i <= end; i++)
+ orion_gpio_set_valid(i, gpio_mode);
+}
+
+static void dove_mpp_dump_regs(void)
+{
+#ifdef DEBUG
+ int i;
+
+ pr_debug("MPP_CTRL regs:");
+ for (i = 0; i < MPP_NR_REGS; i++)
+ printk(" %08x", readl(MPP_CTRL(i)));
+ printk("\n");
+
+ pr_debug("PMU_SIG_CTRL regs:");
+ for (i = 0; i < PMU_SIG_REGS; i++)
+ printk(" %08x", readl(PMU_SIG_CTRL(i)));
+ printk("\n");
+
+ pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", readl(DOVE_PMU_MPP_GENERAL_CTRL));
+ pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE));
+#endif
+}
+
+static void dove_mpp_cfg_nfc(int sel)
+{
+ u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+ mpp_gen_cfg &= ~0x1;
+ mpp_gen_cfg |= sel;
+ writel(mpp_gen_cfg, DOVE_MPP_GENERAL_VIRT_BASE);
+
+ dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK);
+}
+
+static void dove_mpp_cfg_au1(int sel)
+{
+ u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+ u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1);
+ u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+ u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+ mpp_ctrl4 &= ~(DOVE_AU1_GPIO_SEL);
+ ssp_ctrl1 &= ~(DOVE_SSP_ON_AU1);
+ mpp_gen_ctrl &= ~(DOVE_AU1_SPDIFO_GPIO_EN);
+ global_cfg_2 &= ~(DOVE_TWSI_OPTION3_GPIO);
+
+ if (!sel || sel == 0x2)
+ dove_mpp_gpio_mode(52, 57, 0);
+ else
+ dove_mpp_gpio_mode(52, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK);
+
+ if (sel & 0x1) {
+ global_cfg_2 |= DOVE_TWSI_OPTION3_GPIO;
+ dove_mpp_gpio_mode(56, 57, 0);
+ }
+ if (sel & 0x2) {
+ mpp_gen_ctrl |= DOVE_AU1_SPDIFO_GPIO_EN;
+ dove_mpp_gpio_mode(57, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK);
+ }
+ if (sel & 0x4) {
+ ssp_ctrl1 |= DOVE_SSP_ON_AU1;
+ dove_mpp_gpio_mode(52, 55, 0);
+ }
+ if (sel & 0x8)
+ mpp_ctrl4 |= DOVE_AU1_GPIO_SEL;
+
+ writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE);
+ writel(ssp_ctrl1, DOVE_SSP_CTRL_STATUS_1);
+ writel(mpp_gen_ctrl, DOVE_MPP_GENERAL_VIRT_BASE);
+ writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2);
+}
+
+static void dove_mpp_conf_grp(int num, int sel, u32 *mpp_ctrl)
+{
+ int start = dove_mpp_grp[num].start;
+ int end = dove_mpp_grp[num].end;
+ int gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0;
+
+ *mpp_ctrl &= ~(0x1 << num);
+ *mpp_ctrl |= sel << num;
+
+ dove_mpp_gpio_mode(start, end, gpio_mode);
+}
+
+void __init dove_mpp_conf(unsigned int *mpp_list)
+{
+ u32 mpp_ctrl[MPP_NR_REGS];
+ u32 pmu_mpp_ctrl = 0;
+ u32 pmu_sig_ctrl[PMU_SIG_REGS];
+ int i;
+
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
+ for (i = 0; i < MPP_NR_REGS; i++)
+ mpp_ctrl[i] = readl(MPP_CTRL(i));
+
+ for (i = 0; i < PMU_SIG_REGS; i++)
+ pmu_sig_ctrl[i] = readl(PMU_SIG_CTRL(i));
+
+ pmu_mpp_ctrl = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+ dove_mpp_dump_regs();
+
+ for ( ; *mpp_list != MPP_END; mpp_list++) {
+ unsigned int num = MPP_NUM(*mpp_list);
+ unsigned int sel = MPP_SEL(*mpp_list);
+ int shift, gpio_mode;
+
+ if (num > MPP_MAX) {
+ pr_err("dove: invalid MPP number (%u)\n", num);
+ continue;
+ }
+
+ if (*mpp_list & MPP_NFC_MASK) {
+ dove_mpp_cfg_nfc(sel);
+ continue;
+ }
+
+ if (*mpp_list & MPP_AU1_MASK) {
+ dove_mpp_cfg_au1(sel);
+ continue;
+ }
+
+ if (*mpp_list & MPP_GRP_MASK) {
+ dove_mpp_conf_grp(num, sel, &mpp_ctrl[3]);
+ continue;
+ }
+
+ shift = (num & 7) << 2;
+ if (*mpp_list & MPP_PMU_MASK) {
+ pmu_mpp_ctrl |= (0x1 << num);
+ pmu_sig_ctrl[num / 8] &= ~(0xf << shift);
+ pmu_sig_ctrl[num / 8] |= 0xf << shift;
+ gpio_mode = 0;
+ } else {
+ mpp_ctrl[num / 8] &= ~(0xf << shift);
+ mpp_ctrl[num / 8] |= sel << shift;
+ gpio_mode = GPIO_OUTPUT_OK | GPIO_INPUT_OK;
+ }
+
+ orion_gpio_set_valid(num, gpio_mode);
+ }
+
+ for (i = 0; i < MPP_NR_REGS; i++)
+ writel(mpp_ctrl[i], MPP_CTRL(i));
+
+ for (i = 0; i < PMU_SIG_REGS; i++)
+ writel(pmu_sig_ctrl[i], PMU_SIG_CTRL(i));
+
+ writel(pmu_mpp_ctrl, DOVE_PMU_MPP_GENERAL_CTRL);
+
+ dove_mpp_dump_regs();
+}
diff --git a/arch/arm/mach-dove/mpp.h b/arch/arm/mach-dove/mpp.h
new file mode 100644
index 0000000..2a43ce4
--- /dev/null
+++ b/arch/arm/mach-dove/mpp.h
@@ -0,0 +1,220 @@
+#ifndef __ARCH_DOVE_MPP_CODED_H
+#define __ARCH_DOVE_MPP_CODED_H
+
+#define MPP(_num, _mode, _pmu, _grp, _au1, _nfc) ( \
+/* MPP/group number */ ((_num) & 0xff) | \
+/* MPP select value */ (((_mode) & 0xf) << 8) | \
+/* MPP PMU */ ((!!(_pmu)) << 12) | \
+/* group flag */ ((!!(_grp)) << 13) | \
+/* AU1 flag */ ((!!(_au1)) << 14) | \
+/* NFCE flag */ ((!!(_nfc)) << 15))
+
+#define MPP_MAX 71
+
+#define MPP_NUM(x) ((x) & 0xff)
+#define MPP_SEL(x) (((x) >> 8) & 0xf)
+
+#define MPP_PMU_MASK MPP(0, 0x0, 1, 0, 0, 0)
+#define MPP_GRP_MASK MPP(0, 0x0, 0, 1, 0, 0)
+#define MPP_AU1_MASK MPP(0, 0x0, 0, 0, 1, 0)
+#define MPP_NFC_MASK MPP(0, 0x0, 0, 0, 0, 1)
+
+#define MPP_END MPP(0xff, 0xf, 1, 1, 1, 1)
+
+#define MPP_PMU_DRIVE_0 0x1
+#define MPP_PMU_DRIVE_1 0x2
+#define MPP_PMU_SDI 0x3
+#define MPP_PMU_CPU_PWRDWN 0x4
+#define MPP_PMU_STBY_PWRDWN 0x5
+#define MPP_PMU_CORE_PWR_GOOD 0x8
+#define MPP_PMU_BAT_FAULT 0xa
+#define MPP_PMU_EXT0_WU 0xb
+#define MPP_PMU_EXT1_WU 0xc
+#define MPP_PMU_EXT2_WU 0xd
+#define MPP_PMU_BLINK 0xe
+#define MPP_PMU(_num, _mode) MPP((_num), MPP_PMU_##_mode, 1, 0, 0, 0)
+
+#define MPP_PIN(_num, _mode) MPP((_num), (_mode), 0, 0, 0, 0)
+#define MPP_GRP(_grp, _mode) MPP((_grp), (_mode), 0, 1, 0, 0)
+#define MPP_GRP_AU1(_mode) MPP(0, (_mode), 0, 0, 1, 0)
+#define MPP_GRP_NFC(_mode) MPP(0, (_mode), 0, 0, 0, 1)
+
+#define MPP0_GPIO0 MPP_PIN(0, 0x0)
+#define MPP0_UA2_RTSn MPP_PIN(0, 0x2)
+#define MPP0_SDIO0_CD MPP_PIN(0, 0x3)
+#define MPP0_LCD0_PWM MPP_PIN(0, 0xf)
+
+#define MPP1_GPIO1 MPP_PIN(1, 0x0)
+#define MPP1_UA2_CTSn MPP_PIN(1, 0x2)
+#define MPP1_SDIO0_WP MPP_PIN(1, 0x3)
+#define MPP1_LCD1_PWM MPP_PIN(1, 0xf)
+
+#define MPP2_GPIO2 MPP_PIN(2, 0x0)
+#define MPP2_SATA_PRESENT MPP_PIN(2, 0x1)
+#define MPP2_UA2_TXD MPP_PIN(2, 0x2)
+#define MPP2_SDIO0_BUS_POWER MPP_PIN(2, 0x3)
+#define MPP2_UA_RTSn1 MPP_PIN(2, 0x4)
+
+#define MPP3_GPIO3 MPP_PIN(3, 0x0)
+#define MPP3_SATA_ACT MPP_PIN(3, 0x1)
+#define MPP3_UA2_RXD MPP_PIN(3, 0x2)
+#define MPP3_SDIO0_LED_CTRL MPP_PIN(3, 0x3)
+#define MPP3_UA_CTSn1 MPP_PIN(3, 0x4)
+#define MPP3_SPI_LCD_CS1 MPP_PIN(3, 0xf)
+
+#define MPP4_GPIO4 MPP_PIN(4, 0x0)
+#define MPP4_UA3_RTSn MPP_PIN(4, 0x2)
+#define MPP4_SDIO1_CD MPP_PIN(4, 0x3)
+#define MPP4_SPI_1_MISO MPP_PIN(4, 0x4)
+
+#define MPP5_GPIO5 MPP_PIN(5, 0x0)
+#define MPP5_UA3_CTSn MPP_PIN(5, 0x2)
+#define MPP5_SDIO1_WP MPP_PIN(5, 0x3)
+#define MPP5_SPI_1_CS MPP_PIN(5, 0x4)
+
+#define MPP6_GPIO6 MPP_PIN(6, 0x0)
+#define MPP6_UA3_TXD MPP_PIN(6, 0x2)
+#define MPP6_SDIO1_BUS_POWER MPP_PIN(6, 0x3)
+#define MPP6_SPI_1_MOSI MPP_PIN(6, 0x4)
+
+#define MPP7_GPIO7 MPP_PIN(7, 0x0)
+#define MPP7_UA3_RXD MPP_PIN(7, 0x2)
+#define MPP7_SDIO1_LED_CTRL MPP_PIN(7, 0x3)
+#define MPP7_SPI_1_SCK MPP_PIN(7, 0x4)
+
+#define MPP8_GPIO8 MPP_PIN(8, 0x0)
+#define MPP8_WD_RST_OUT MPP_PIN(8, 0x1)
+
+#define MPP9_GPIO9 MPP_PIN(9, 0x0)
+#define MPP9_PEX1_CLKREQn MPP_PIN(9, 0x5)
+
+#define MPP10_GPIO10 MPP_PIN(10, 0x0)
+#define MPP10_SSP_SCLK MPP_PIN(10, 0x5)
+
+#define MPP11_GPIO11 MPP_PIN(11, 0x0)
+#define MPP11_SATA_PRESENT MPP_PIN(11, 0x1)
+#define MPP11_SATA_ACT MPP_PIN(11, 0x2)
+#define MPP11_SDIO0_LED_CTRL MPP_PIN(11, 0x3)
+#define MPP11_SDIO1_LED_CTRL MPP_PIN(11, 0x4)
+#define MPP11_PEX0_CLKREQn MPP_PIN(11, 0x5)
+
+#define MPP12_GPIO12 MPP_PIN(12, 0x0)
+#define MPP12_SATA_ACT MPP_PIN(12, 0x1)
+#define MPP12_UA2_RTSn MPP_PIN(12, 0x2)
+#define MPP12_AD0_I2S_EXT_MCLK MPP_PIN(12, 0x3)
+#define MPP12_SDIO1_CD MPP_PIN(12, 0x4)
+
+#define MPP13_GPIO13 MPP_PIN(13, 0x0)
+#define MPP13_UA2_CTSn MPP_PIN(13, 0x2)
+#define MPP13_AD1_I2S_EXT_MCLK MPP_PIN(13, 0x3)
+#define MPP13_SDIO1WP MPP_PIN(13, 0x4)
+#define MPP13_SSP_EXTCLK MPP_PIN(13, 0x5)
+
+#define MPP14_GPIO14 MPP_PIN(14, 0x0)
+#define MPP14_UA2_TXD MPP_PIN(14, 0x2)
+#define MPP14_SDIO1_BUS_POWER MPP_PIN(14, 0x4)
+#define MPP14_SSP_RXD MPP_PIN(14, 0x5)
+
+#define MPP15_GPIO15 MPP_PIN(15, 0x0)
+#define MPP15_UA2_RXD MPP_PIN(15, 0x2)
+#define MPP15_SDIO1_LED_CTRL MPP_PIN(15, 0x4)
+#define MPP15_SSP_SFRM MPP_PIN(15, 0x5)
+
+#define MPP16_GPIO16 MPP_PIN(16, 0x0)
+#define MPP16_UA3_RTSn MPP_PIN(16, 0x2)
+#define MPP16_SDIO0_CD MPP_PIN(16, 0x3)
+#define MPP16_SPI_LCD_CS1 MPP_PIN(16, 0x4)
+#define MPP16_AC97_SDATA_IN1 MPP_PIN(16, 0x5)
+
+#define MPP17_GPIO17 MPP_PIN(17, 0x0)
+#define MPP17_AC97_SYSCLK_OUT MPP_PIN(17, 0x1)
+#define MPP17_UA3_CTSn MPP_PIN(17, 0x2)
+#define MPP17_SDIO0_WP MPP_PIN(17, 0x3)
+#define MPP17_TW_SDA2 MPP_PIN(17, 0x4)
+#define MPP17_AC97_SDATA_IN2 MPP_PIN(17, 0x5)
+
+#define MPP18_GPIO18 MPP_PIN(18, 0x0)
+#define MPP18_UA3_TXD MPP_PIN(18, 0x2)
+#define MPP18_SDIO0_BUS_POWER MPP_PIN(18, 0x3)
+#define MPP18_LCD0_PWM MPP_PIN(18, 0x4)
+#define MPP18_AC_SDATA_IN3 MPP_PIN(18, 0x5)
+
+#define MPP19_GPIO19 MPP_PIN(19, 0x0)
+#define MPP19_UA3_RXD MPP_PIN(19, 0x2)
+#define MPP19_SDIO0_LED_CTRL MPP_PIN(19, 0x3)
+#define MPP19_TW_SCK2 MPP_PIN(19, 0x4)
+
+#define MPP20_GPIO20 MPP_PIN(20, 0x0)
+#define MPP20_AC97_SYSCLK_OUT MPP_PIN(20, 0x1)
+#define MPP20_SPI_LCD_MISO MPP_PIN(20, 0x2)
+#define MPP20_SDIO1_CD MPP_PIN(20, 0x3)
+#define MPP20_SDIO0_CD MPP_PIN(20, 0x5)
+#define MPP20_SPI_1_MISO MPP_PIN(20, 0x6)
+
+#define MPP21_GPIO21 MPP_PIN(21, 0x0)
+#define MPP21_UA1_RTSn MPP_PIN(21, 0x1)
+#define MPP21_SPI_LCD_CS0 MPP_PIN(21, 0x2)
+#define MPP21_SDIO1_WP MPP_PIN(21, 0x3)
+#define MPP21_SSP_SFRM MPP_PIN(21, 0x4)
+#define MPP21_SDIO0_WP MPP_PIN(21, 0x5)
+#define MPP21_SPI_1_CS MPP_PIN(21, 0x6)
+
+#define MPP22_GPIO22 MPP_PIN(22, 0x0)
+#define MPP22_UA1_CTSn MPP_PIN(22, 0x1)
+#define MPP22_SPI_LCD_MOSI MPP_PIN(22, 0x2)
+#define MPP22_SDIO1_BUS_POWER MPP_PIN(22, 0x3)
+#define MPP22_SSP_TXD MPP_PIN(22, 0x4)
+#define MPP22_SDIO0_BUS_POWER MPP_PIN(22, 0x5)
+#define MPP22_SPI_1_MOSI MPP_PIN(22, 0x6)
+
+#define MPP23_GPIO23 MPP_PIN(23, 0x0)
+#define MPP23_SPI_LCD_SCK MPP_PIN(23, 0x2)
+#define MPP23_SDIO1_LED_CTRL MPP_PIN(23, 0x3)
+#define MPP23_SSP_SCLK MPP_PIN(23, 0x4)
+#define MPP23_SDIO0_LED_CTRL MPP_PIN(23, 0x5)
+#define MPP23_SPI_1_SCK MPP_PIN(23, 0x6)
+
+/* for MPP groups _num is a group index */
+enum dove_mpp_grp_idx {
+ MPP_24_39 = 2,
+ MPP_40_45 = 0,
+ MPP_46_51 = 1,
+ MPP_58_61 = 5,
+ MPP_62_63 = 4,
+};
+
+#define MPP24_39_GPIO MPP_GRP(MPP_24_39, 0x1)
+#define MPP24_39_CAM MPP_GRP(MPP_24_39, 0x0)
+
+#define MPP40_45_GPIO MPP_GRP(MPP_40_45, 0x1)
+#define MPP40_45_SD0 MPP_GRP(MPP_40_45, 0x0)
+
+#define MPP46_51_GPIO MPP_GRP(MPP_46_51, 0x1)
+#define MPP46_51_SD1 MPP_GRP(MPP_46_51, 0x0)
+
+#define MPP58_61_GPIO MPP_GRP(MPP_58_61, 0x1)
+#define MPP58_61_SPI MPP_GRP(MPP_58_61, 0x0)
+
+#define MPP62_63_GPIO MPP_GRP(MPP_62_63, 0x1)
+#define MPP62_63_UA1 MPP_GRP(MPP_62_63, 0x0)
+
+/* The MPP[64:71] control differs from other groups */
+#define MPP64_71_GPO MPP_GRP_NFC(0x1)
+#define MPP64_71_NFC MPP_GRP_NFC(0x0)
+
+/*
+ * The MPP[52:57] functionality is encoded by 4 bits in different
+ * registers. The _num field in this case encodes those bits in
+ * correspodence with Table 135 of 88AP510 Functional specification
+ */
+#define MPP52_57_AU1 MPP_GRP_AU1(0x0)
+#define MPP52_57_AU1_GPIO57 MPP_GRP_AU1(0x2)
+#define MPP52_57_GPIO MPP_GRP_AU1(0xa)
+#define MPP52_57_TW_GPIO MPP_GRP_AU1(0xb)
+#define MPP52_57_AU1_SSP MPP_GRP_AU1(0xc)
+#define MPP52_57_SSP_GPIO MPP_GRP_AU1(0xe)
+#define MPP52_57_SSP_TW MPP_GRP_AU1(0xf)
+
+void dove_mpp_conf(unsigned int *mpp_list);
+
+#endif /* __ARCH_DOVE_MPP_CODED_H */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 197f9e2..17d2e60 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,13 +1,37 @@
config IMX_HAVE_DMA_V1
bool
-if ARCH_MX1
-
config SOC_IMX1
+ bool
select CPU_ARM920T
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
+ select MXC_AVIC
+
+config SOC_IMX21
bool
+ select CPU_ARM926T
+ select ARCH_MXC_AUDMUX_V1
+ select IMX_HAVE_DMA_V1
+ select IMX_HAVE_IOMUX_V1
+ select MXC_AVIC
+
+config SOC_IMX25
+ bool
+ select CPU_ARM926T
+ select ARCH_MXC_AUDMUX_V2
+ select ARCH_MXC_IOMUX_V3
+ select MXC_AVIC
+
+config SOC_IMX27
+ bool
+ select CPU_ARM926T
+ select ARCH_MXC_AUDMUX_V1
+ select IMX_HAVE_DMA_V1
+ select IMX_HAVE_IOMUX_V1
+ select MXC_AVIC
+
+if ARCH_MX1
comment "MX1 platforms:"
config MACH_MXLADS
@@ -31,33 +55,17 @@
if ARCH_MX2
-config SOC_IMX21
- select CPU_ARM926T
- select ARCH_MXC_AUDMUX_V1
- select IMX_HAVE_DMA_V1
- select IMX_HAVE_IOMUX_V1
- bool
-
-config SOC_IMX27
- select CPU_ARM926T
- select ARCH_MXC_AUDMUX_V1
- select IMX_HAVE_DMA_V1
- select IMX_HAVE_IOMUX_V1
- bool
-
choice
prompt "CPUs:"
default MACH_MX21
config MACH_MX21
bool "i.MX21 support"
- select SOC_IMX21
help
This enables support for Freescale's MX2 based i.MX21 processor.
config MACH_MX27
bool "i.MX27 support"
- select SOC_IMX27
help
This enables support for Freescale's MX2 based i.MX27 processor.
@@ -71,7 +79,10 @@
config MACH_MX21ADS
bool "MX21ADS platform"
+ select SOC_IMX21
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for MX21ADS platform. This includes specific
@@ -79,24 +90,79 @@
endif
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+ bool "Support MX25PDK (3DS) Platform"
+ select SOC_IMX25
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMXDI_RTC
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+
+config MACH_EUKREA_CPUIMX25
+ bool "Support Eukrea CPUIMX25 Platform"
+ select SOC_IMX25
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMXDI_RTC
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select MXC_ULPI if USB_ULPI
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX25
+ default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+ bool "Eukrea MBIMXSD development board"
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMXSD evaluation board.
+
+endchoice
+
+endif
+
if MACH_MX27
comment "MX27 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
+ select SOC_IMX27
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+ select SOC_IMX27
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
@@ -109,8 +175,9 @@
default MACH_PCM970_BASEBOARD
config MACH_PCM970_BASEBOARD
- prompt "PHYTEC PCM970 development board"
- bool
+ bool "PHYTEC PCM970 development board"
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_MXC_MMC
help
This adds board specific devices that can be found on Phytec's
PCM970 evaluation board.
@@ -119,9 +186,14 @@
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
+ select SOC_IMX27
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX27 platform. This includes
@@ -130,6 +202,7 @@
config MACH_EUKREA_CPUIMX27_USESDHC2
bool "CPUIMX27 integrates SDHC2 module"
depends on MACH_CPUIMX27
+ select IMX_HAVE_PLATFORM_MXC_MMC
help
This adds support for the internal SDHC2 used on CPUIMX27
for wifi or eMMC.
@@ -148,8 +221,11 @@
config MACH_EUKREA_MBIMX27_BASEBOARD
bool "Eukrea MBIMX27 development board"
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
help
This adds board specific devices that can be found on Eukrea's
@@ -159,15 +235,26 @@
config MACH_MX27_3DS
bool "MX27PDK platform"
+ select SOC_IMX27
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
+ select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_EHCI
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
@@ -175,6 +262,7 @@
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
+ select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX27 LITEKIT platform. This includes specific
@@ -182,10 +270,17 @@
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
+ select SOC_IMX27
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
@@ -194,8 +289,11 @@
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
+ select SOC_IMX27
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for i-MXT (aka td60) platform. This
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 5582692..77100bf 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,13 +4,13 @@
# Object file lists.
-obj-y := devices.o
-
obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o
+
obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
@@ -22,6 +22,10 @@
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 7988a85..3953d60 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -6,6 +6,10 @@
params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
+zreladdr-$(CONFIG_ARCH_MX25) := 0x80008000
+params_phys-$(CONFIG_ARCH_MX25) := 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000
+
zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000
params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
index d705655..bf30a8c 100644
--- a/arch/arm/mach-imx/clock-imx21.c
+++ b/arch/arm/mach-imx/clock-imx21.c
@@ -1185,7 +1185,7 @@
_REGISTER_CLOCK(NULL, "brom", brom_clk)
_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
- _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-imx/clock-imx25.c
similarity index 98%
rename from arch/arm/mach-mx25/clock.c
rename to arch/arm/mach-imx/clock-imx25.c
index 00dcb08..daa0165 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -295,7 +295,7 @@
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
+ _REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index ca1017b..583f251 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -125,7 +125,7 @@
if (clk->parent == parent)
return 0;
- if (mx27_revision() >= CHIP_REV_2_0) {
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
if (parent == &mpll_main1_clk) {
cscr |= CCM_CSCR_ARM_SRC;
} else {
@@ -174,7 +174,7 @@
div--;
reg = __raw_readl(CCM_CSCR);
- if (mx27_revision() >= CHIP_REV_2_0) {
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
reg &= ~(3 << 12);
reg |= div << 12;
reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
@@ -244,7 +244,7 @@
parent_rate = clk_get_rate(clk->parent);
- if (mx27_revision() >= CHIP_REV_2_0)
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
pdf += 4; /* MX27 TO2+ */
else
pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
@@ -269,7 +269,7 @@
parent_rate = clk_get_rate(clk->parent);
- if (mx27_revision() >= CHIP_REV_2_0)
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
else
nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
@@ -284,7 +284,7 @@
parent_rate = clk_get_rate(clk->parent);
- if (mx27_revision() >= CHIP_REV_2_0) {
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
vpu_pdf += 4;
} else {
@@ -347,7 +347,7 @@
* clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
* clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
*/
- if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0 && clk->id == 1)
return 2UL * parent_rate / 3UL;
return parent_rate;
@@ -365,7 +365,7 @@
/* On TO2 we have to write the value back. Otherwise we
* read 0 from this register the next time.
*/
- if (mx27_revision() >= CHIP_REV_2_0)
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
__raw_writel(reg, CCM_SPCTL0);
return mxc_decode_pll(reg, rate);
@@ -376,7 +376,7 @@
u32 div;
unsigned long rate;
- if (mx27_revision() >= CHIP_REV_2_0)
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
else
div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
@@ -389,7 +389,7 @@
{
unsigned long rate, bclk_pdf;
- if (mx27_revision() >= CHIP_REV_2_0)
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
else
bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
@@ -402,7 +402,7 @@
{
unsigned long rate, ipg_pdf;
- if (mx27_revision() >= CHIP_REV_2_0)
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
return clk_get_rate(clk->parent);
else
ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
@@ -667,7 +667,7 @@
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
- _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
@@ -683,7 +683,7 @@
{
unsigned long cscr = __raw_readl(CCM_CSCR);
- if (mx27_revision() >= CHIP_REV_2_0) {
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
if (cscr & CCM_CSCR_ARM_SRC)
cpu_clk.parent = &mpll_main1_clk;
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index d8d3b2d..3b117be 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -42,7 +42,19 @@
val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+ SYS_CHIP_ID));
- cpu_silicon_rev = (int)(val >> 28);
+ switch (val >> 28) {
+ case 0:
+ cpu_silicon_rev = IMX_CHIP_REVISION_1_0;
+ break;
+ case 1:
+ cpu_silicon_rev = IMX_CHIP_REVISION_2_0;
+ break;
+ case 2:
+ cpu_silicon_rev = IMX_CHIP_REVISION_2_1;
+ break;
+ default:
+ cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN;
+ }
cpu_partnumber = (int)((val >> 12) & 0xFFFF);
}
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index d189039..16744d2 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -9,10 +9,26 @@
#include <mach/mx21.h>
#include <mach/devices-common.h>
+extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst;
+#define imx21_add_imx21_hcd(pdata) \
+ imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst;
+#define imx21_add_imx2_wdt(pdata) \
+ imx_add_imx2_wdt(&imx21_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst;
+#define imx21_add_imx_fb(pdata) \
+ imx_add_imx_fb(&imx21_imx_fb_data, pdata)
+
extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
#define imx21_add_imx_i2c(pdata) \
imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
+extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst;
+#define imx21_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
+
extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
#define imx21_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
@@ -25,10 +41,18 @@
#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata)
#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata)
+extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst;
+#define imx21_add_mxc_mmc(id, pdata) \
+ imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
+
extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
#define imx21_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
+extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst;
+#define imx21_add_mxc_w1(pdata) \
+ imx_add_mxc_w1(&imx21_mxc_w1_data)
+
extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
#define imx21_add_cspi(id, pdata) \
imx_add_spi_imx(&imx21_cspi_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
new file mode 100644
index 0000000..bde33ca
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx25.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx25_fec_data __initconst;
+#define imx25_add_fec(pdata) \
+ imx_add_fec(&imx25_fec_data, pdata)
+
+extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
+#define imx25_add_flexcan(id, pdata) \
+ imx_add_flexcan(&imx25_flexcan_data[id], pdata)
+#define imx25_add_flexcan0(pdata) imx25_add_flexcan(0, pdata)
+#define imx25_add_flexcan1(pdata) imx25_add_flexcan(1, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
+#define imx25_add_fsl_usb2_udc(pdata) \
+ imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
+
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
+#define imx25_add_imxdi_rtc(pdata) \
+ imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
+
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
+#define imx25_add_imx2_wdt(pdata) \
+ imx_add_imx2_wdt(&imx25_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
+#define imx25_add_imx_fb(pdata) \
+ imx_add_imx_fb(&imx25_imx_fb_data, pdata)
+
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+#define imx25_add_imx_i2c(id, pdata) \
+ imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
+#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
+#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
+#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
+#define imx25_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+#define imx25_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+#define imx25_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
+#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
+#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
+#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
+#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
+#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
+
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
+#define imx25_add_mx2_camera(pdata) \
+ imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
+#define imx25_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
+#define imx25_add_mxc_ehci_hs(pdata) \
+ imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
+
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
+#define imx25_add_mxc_nand(pdata) \
+ imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
+
+extern const struct imx_sdhci_esdhc_imx_data
+imx25_sdhci_esdhc_imx_data[] __initconst;
+#define imx25_add_sdhci_esdhc_imx(id, pdata) \
+ imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
+#define imx25_add_spi_imx(id, pdata) \
+ imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
+#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
+#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 7011690..f1272d4 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -13,10 +13,26 @@
#define imx27_add_fec(pdata) \
imx_add_fec(&imx27_fec_data, pdata)
+extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst;
+#define imx27_add_fsl_usb2_udc(pdata) \
+ imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst;
+#define imx27_add_imx2_wdt(pdata) \
+ imx_add_imx2_wdt(&imx27_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst;
+#define imx27_add_imx_fb(pdata) \
+ imx_add_imx_fb(&imx27_imx_fb_data, pdata)
+
extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
#define imx27_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
+extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst;
+#define imx27_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
+
extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
#define imx27_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
@@ -31,10 +47,29 @@
#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata)
#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata)
+extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst;
+#define imx27_add_mx2_camera(pdata) \
+ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst;
+#define imx27_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst;
+#define imx27_add_mxc_ehci_hs(id, pdata) \
+ imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst;
+#define imx27_add_mxc_mmc(id, pdata) \
+ imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
+
extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
#define imx27_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
+extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst;
+#define imx27_add_mxc_w1(pdata) \
+ imx_add_mxc_w1(&imx27_mxc_w1_data)
+
extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
#define imx27_add_cspi(id, pdata) \
imx_add_spi_imx(&imx27_cspi_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
deleted file mode 100644
index fba5047..0000000
--- a/arch/arm/mach-imx/devices.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * Author: MontaVista Software, Inc.
- * <source@mvista.com>
- *
- * Based on the OMAP devices.c
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-#if defined(CONFIG_ARCH_MX1)
-static struct resource imx1_camera_resources[] = {
- {
- .start = 0x00224000,
- .end = 0x00224010,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX1_CSI_INT,
- .end = MX1_CSI_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device imx1_camera_device = {
- .name = "mx1-camera",
- .id = 0, /* This is used to put cameras on this interface */
- .dev = {
- .dma_mask = &imx1_camera_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = imx1_camera_resources,
- .num_resources = ARRAY_SIZE(imx1_camera_resources),
-};
-
-static struct resource imx_rtc_resources[] = {
- {
- .start = 0x00204000,
- .end = 0x00204024,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX1_RTC_INT,
- .end = MX1_RTC_INT,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MX1_RTC_SAMINT,
- .end = MX1_RTC_SAMINT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_rtc_device = {
- .name = "rtc-imx",
- .id = 0,
- .resource = imx_rtc_resources,
- .num_resources = ARRAY_SIZE(imx_rtc_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
- {
- .start = 0x00201000,
- .end = 0x00201008,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX1_WDT_INT,
- .end = MX1_WDT_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_wdt_device = {
- .name = "imx-wdt",
- .id = 0,
- .resource = imx_wdt_resources,
- .num_resources = ARRAY_SIZE(imx_wdt_resources),
-};
-
-static struct resource imx_usb_resources[] = {
- {
- .start = 0x00212000,
- .end = 0x00212148,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX1_USBD_INT0,
- .end = MX1_USBD_INT0,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MX1_USBD_INT1,
- .end = MX1_USBD_INT1,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MX1_USBD_INT2,
- .end = MX1_USBD_INT2,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MX1_USBD_INT3,
- .end = MX1_USBD_INT3,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MX1_USBD_INT4,
- .end = MX1_USBD_INT4,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MX1_USBD_INT5,
- .end = MX1_USBD_INT5,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MX1_USBD_INT6,
- .end = MX1_USBD_INT6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_usb_device = {
- .name = "imx_udc",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_usb_resources),
- .resource = imx_usb_resources,
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
- {
- .chip.label = "gpio-0",
- .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
- .irq = MX1_GPIO_INT_PORTA,
- .virtual_irq_start = MXC_GPIO_IRQ_START,
- }, {
- .chip.label = "gpio-1",
- .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
- .irq = MX1_GPIO_INT_PORTB,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- }, {
- .chip.label = "gpio-2",
- .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
- .irq = MX1_GPIO_INT_PORTC,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- }, {
- .chip.label = "gpio-3",
- .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
- .irq = MX1_GPIO_INT_PORTD,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- }
-};
-
-int __init imx1_register_gpios(void)
-{
- return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-#endif
-
-#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-
-#ifdef CONFIG_MACH_MX27
-static struct resource mx27_camera_resources[] = {
- {
- .start = MX27_CSI_BASE_ADDR,
- .end = MX27_CSI_BASE_ADDR + 0x1f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_EMMA_PRP_BASE_ADDR,
- .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_CSI,
- .end = MX27_INT_CSI,
- .flags = IORESOURCE_IRQ,
- },{
- .start = MX27_INT_EMMAPRP,
- .end = MX27_INT_EMMAPRP,
- .flags = IORESOURCE_IRQ,
- },
-};
-struct platform_device mx27_camera_device = {
- .name = "mx2-camera",
- .id = 0,
- .num_resources = ARRAY_SIZE(mx27_camera_resources),
- .resource = mx27_camera_resources,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-#endif
-
-/*
- * General Purpose Timer
- * - i.MX21: 3 timers
- * - i.MX27: 6 timers
- */
-#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq) \
- static struct resource timer ## n ##_resources[] = { \
- { \
- .start = baseaddr, \
- .end = baseaddr + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, { \
- .start = irq, \
- .end = irq, \
- .flags = IORESOURCE_IRQ, \
- } \
- }; \
- \
- struct platform_device mxc_gpt ## n = { \
- .name = "imx_gpt", \
- .id = n, \
- .num_resources = ARRAY_SIZE(timer ## n ## _resources), \
- .resource = timer ## n ## _resources, \
- }
-
-/* We use gpt1 as system timer, so do not add a device for this one */
-DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
-DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
-DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
-DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
-#endif
-
-/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
-static struct resource mxc_wdt_resources[] = {
- {
- .start = MX2x_WDOG_BASE_ADDR,
- .end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_wdt = {
- .name = "imx2-wdt",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_wdt_resources),
- .resource = mxc_wdt_resources,
-};
-
-static struct resource mxc_w1_master_resources[] = {
- {
- .start = MX2x_OWIRE_BASE_ADDR,
- .end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_w1_master_device = {
- .name = "mxc_w1",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_w1_master_resources),
- .resource = mxc_w1_master_resources,
-};
-
-/*
- * lcdc:
- * - i.MX1: the basic controller
- * - i.MX21: to be checked
- * - i.MX27: like i.MX1, with slightly variations
- */
-static struct resource mxc_fb[] = {
- {
- .start = MX2x_LCDC_BASE_ADDR,
- .end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX2x_INT_LCDC,
- .end = MX2x_INT_LCDC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-/* mxc lcd driver */
-struct platform_device mxc_fb_device = {
- .name = "imx-fb",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_fb),
- .resource = mxc_fb,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource mxc_pwm_resources[] = {
- {
- .start = MX2x_PWM_BASE_ADDR,
- .end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX2x_INT_PWM,
- .end = MX2x_INT_PWM,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_pwm_device = {
- .name = "mxc_pwm",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_pwm_resources),
- .resource = mxc_pwm_resources,
-};
-
-#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq) \
- static struct resource mxc_sdhc_resources ## n[] = { \
- { \
- .start = baseaddr, \
- .end = baseaddr + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, { \
- .start = irq, \
- .end = irq, \
- .flags = IORESOURCE_IRQ, \
- }, { \
- .start = dmareq, \
- .end = dmareq, \
- .flags = IORESOURCE_DMA, \
- }, \
- }; \
- \
- static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32); \
- \
- struct platform_device mxc_sdhc_device ## n = { \
- .name = "mxc-mmc", \
- .id = n, \
- .dev = { \
- .dma_mask = &mxc_sdhc ## n ## _dmamask, \
- .coherent_dma_mask = DMA_BIT_MASK(32), \
- }, \
- .num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n), \
- .resource = mxc_sdhc_resources ## n, \
- }
-
-DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
-DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
-
-#ifdef CONFIG_MACH_MX27
-static struct resource otg_resources[] = {
- {
- .start = MX27_USBOTG_BASE_ADDR,
- .end = MX27_USBOTG_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_USB3,
- .end = MX27_INT_USB3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
- .name = "fsl-usb2-udc",
- .id = -1,
- .dev = {
- .dma_mask = &otg_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = otg_resources,
- .num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
- .name = "mxc-ehci",
- .id = 0,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &otg_dmamask,
- },
- .resource = otg_resources,
- .num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh1_resources[] = {
- {
- .start = MX27_USBOTG_BASE_ADDR + 0x200,
- .end = MX27_USBOTG_BASE_ADDR + 0x3ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_USB1,
- .end = MX27_INT_USB1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh1 = {
- .name = "mxc-ehci",
- .id = 1,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &usbh1_dmamask,
- },
- .resource = mxc_usbh1_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
- {
- .start = MX27_USBOTG_BASE_ADDR + 0x400,
- .end = MX27_USBOTG_BASE_ADDR + 0x5ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_USB2,
- .end = MX27_INT_USB2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh2 = {
- .name = "mxc-ehci",
- .id = 2,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &usbh2_dmamask,
- },
- .resource = mxc_usbh2_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-#endif
-
-/* GPIO port description */
-#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \
- { \
- .chip.label = "gpio-" #n, \
- .irq = _irq, \
- .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
- n * 0x100), \
- .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
- }
-
-#define DEFINE_MXC_GPIO_PORT(SOC, n) \
- { \
- .chip.label = "gpio-" #n, \
- .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
- n * 0x100), \
- .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
- }
-
-#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \
- static struct mxc_gpio_port pfx ## _gpio_ports[] = { \
- DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \
- DEFINE_MXC_GPIO_PORT(SOC, 1), \
- DEFINE_MXC_GPIO_PORT(SOC, 2), \
- DEFINE_MXC_GPIO_PORT(SOC, 3), \
- DEFINE_MXC_GPIO_PORT(SOC, 4), \
- DEFINE_MXC_GPIO_PORT(SOC, 5), \
- }
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_GPIO_PORTS(MX21, imx21);
-
-int __init imx21_register_gpios(void)
-{
- return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-
-int __init imx27_register_gpios(void)
-{
- return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX21
-static struct resource mx21_usbhc_resources[] = {
- {
- .start = MX21_USBOTG_BASE_ADDR,
- .end = MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX21_INT_USBHOST,
- .end = MX21_INT_USBHOST,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mx21_usbhc_device = {
- .name = "imx21-hcd",
- .id = 0,
- .dev = {
- .dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mx21_usbhc_resources),
- .resource = mx21_usbhc_resources,
-};
-#endif
-
-static struct resource imx_kpp_resources[] = {
- {
- .start = MX2x_KPP_BASE_ADDR,
- .end = MX2x_KPP_BASE_ADDR + 0xf,
- .flags = IORESOURCE_MEM
- }, {
- .start = MX2x_INT_KPP,
- .end = MX2x_INT_KPP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_kpp_device = {
- .name = "imx-keypad",
- .id = -1,
- .num_resources = ARRAY_SIZE(imx_kpp_resources),
- .resource = imx_kpp_resources,
-};
-
-#endif
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
deleted file mode 100644
index 807f02a..0000000
--- a/arch/arm/mach-imx/devices.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifdef CONFIG_ARCH_MX1
-extern struct platform_device imx1_camera_device;
-extern struct platform_device imx_rtc_device;
-extern struct platform_device imx_wdt_device;
-extern struct platform_device imx_usb_device;
-#endif
-
-#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-extern struct platform_device mxc_gpt1;
-extern struct platform_device mxc_gpt2;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_gpt3;
-extern struct platform_device mxc_gpt4;
-extern struct platform_device mxc_gpt5;
-#endif
-extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mx27_camera_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_kpp_device;
-#endif
diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
index 3e8c47c..e9f1769 100644
--- a/arch/arm/mach-imx/dma-v1.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -818,9 +818,11 @@
imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
else
#endif
- BUG();
+ return 0;
dma_clk = clk_get(NULL, "dma");
+ if (IS_ERR(dma_clk))
+ return PTR_ERR(dma_clk);
clk_enable(dma_clk);
/* reset DMA module */
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 7e1e9dc..275c858 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -26,20 +26,16 @@
#include <linux/spi/ads7846.h>
#include <linux/backlight.h>
#include <video/platform_lcd.h>
-#include <linux/input/matrix_keypad.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
#include <mach/hardware.h>
-#include <mach/mmc.h>
#include <mach/spi.h>
#include <mach/audmux.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int eukrea_mbimx27_pins[] __initconst = {
/* UART2 */
@@ -111,7 +107,8 @@
KEY(1, 1, KEY_LEFT),
};
-static struct matrix_keymap_data eukrea_mbimx27_keymap_data = {
+static const struct matrix_keymap_data
+eukrea_mbimx27_keymap_data __initconst = {
.keymap = eukrea_mbimx27_keymap,
.keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap),
};
@@ -196,7 +193,7 @@
},
};
-static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
.mode = eukrea_mbimx27_modes,
.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
@@ -300,7 +297,7 @@
&leds_gpio,
};
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.dat3_card_detect = 1,
};
@@ -345,8 +342,8 @@
imx27_add_imx_uart3(&uart_pdata);
#endif
- mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
- mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+ imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
+ imx27_add_mxc_mmc(0, &sdhc_pdata);
i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
@@ -380,7 +377,7 @@
gpio_request(GPIO_PORTA | 25, "lcd_enable");
platform_device_register(&eukrea_mbimx27_lcd_powerdev);
- mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data);
+ imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
similarity index 96%
rename from arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index e765ac5..cb705c2 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -33,13 +33,11 @@
#include <asm/mach/arch.h>
#include <mach/mx25.h>
#include <mach/imx-uart.h>
-#include <mach/imxfb.h>
#include <mach/audmux.h>
#include "devices-imx25.h"
-#include "devices.h"
-static struct pad_desc eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LCD */
MX25_PAD_LD0__LD0,
MX25_PAD_LD1__LD1,
@@ -151,7 +149,7 @@
},
};
-static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
+static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
.mode = eukrea_mximxsd_modes,
.num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
.pwmr = 0x00A903FF,
@@ -273,11 +271,11 @@
#endif
imx25_add_imx_uart1(&uart_pdata);
- mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
+ imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1(NULL);
- imx25_add_esdhc(0, NULL);
+ imx25_add_sdhci_esdhc_imx(0, NULL);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 745ee60..6cf04da 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -28,7 +28,6 @@
#include <linux/serial_8250.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -40,11 +39,9 @@
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int eukrea_cpuimx27_pins[] __initconst = {
/* UART1 */
@@ -157,8 +154,6 @@
static struct platform_device *platform_devices[] __initdata = {
&eukrea_cpuimx27_nor_mtd_device,
- &mxc_wdt,
- &mxc_w1_master_device,
};
static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
@@ -215,18 +210,18 @@
#endif
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
@@ -262,10 +257,12 @@
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx27_add_imx2_wdt(NULL);
+ imx27_add_mxc_w1(NULL);
#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
/* SDHC2 can be used for Wifi */
- mxc_register_device(&mxc_sdhc_device1, NULL);
+ imx27_add_mxc_mmc(1, NULL);
#endif
#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
/* in which case UART4 is also used for Bluetooth */
@@ -281,16 +278,16 @@
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx27_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
if (!otg_mode_host)
- mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+ imx27_add_fsl_usb2_udc(&otg_device_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
eukrea_mbimx27_baseboard_init();
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
similarity index 88%
rename from arch/arm/mach-mx25/mach-cpuimx25.c
rename to arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index f6f9ad6..eb395ab 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -26,7 +26,6 @@
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
#include <mach/eukrea-baseboards.h>
#include <mach/hardware.h>
@@ -39,17 +38,15 @@
#include <mach/mx25.h>
#include <mach/mxc_nand.h>
#include <mach/imxfb.h>
-#include <mach/mxc_ehci.h>
#include <mach/iomux-mx25.h>
#include "devices-imx25.h"
-#include "devices.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct pad_desc eukrea_cpuimx25_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
/* FEC - RMII */
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
@@ -87,18 +84,18 @@
},
};
-static struct mxc_usbh_platform_data otg_pdata = {
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
};
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
};
@@ -126,7 +123,7 @@
imx25_add_imx_uart0(&uart_pdata);
imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
- mxc_register_device(&mx25_rtc_device, NULL);
+ imx25_add_imxdi_rtc(NULL);
imx25_add_fec(&mx25_fec_pdata);
i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
@@ -134,11 +131,11 @@
imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
if (otg_mode_host)
- mxc_register_device(&mxc_otg, &otg_pdata);
+ imx25_add_mxc_ehci_otg(&otg_pdata);
else
- mxc_register_device(&otg_udc_device, &otg_device_pdata);
+ imx25_add_fsl_usb2_udc(&otg_device_pdata);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx25_add_mxc_ehci_hs(&usbh2_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
eukrea_mbimxsd25_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 59716fa..40a3666 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -34,12 +34,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
-#include <mach/mmc.h>
#include <mach/iomux.h>
-#include <mach/mxc_ehci.h>
#include "devices-imx27.h"
-#include "devices.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
#define SDHC1_IRQ IRQ_GPIOB(25)
@@ -156,7 +153,7 @@
free_irq(SDHC1_IRQ, data);
}
-static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = {
+static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
.init = visstrim_m10_sdhc1_init,
.exit = visstrim_m10_sdhc1_exit,
};
@@ -216,7 +213,8 @@
return 0;
}
-static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = {
+static const struct mxc_usbh_platform_data
+visstrim_m10_usbotg_pdata __initconst = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
@@ -237,8 +235,8 @@
ARRAY_SIZE(visstrim_m10_i2c_devices));
imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
- mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata);
- mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata);
+ imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
+ imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index bbdbc75..3a1202e 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -25,7 +25,6 @@
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int mx27lite_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 6187ce9..1f446e5 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -30,7 +30,6 @@
#include <mach/irqs.h>
#include "devices-imx1.h"
-#include "devices.h"
static const int mx1ads_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index e1282e9..0a37257 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -24,13 +24,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/imxfb.h>
#include <mach/iomux-mx21.h>
#include <mach/mxc_nand.h>
-#include <mach/mmc.h>
#include "devices-imx21.h"
-#include "devices.h"
/*
* Memory-mapped I/O on MX21ADS base board
@@ -213,7 +210,7 @@
},
};
-static struct imx_fb_platform_data mx21ads_fb_data = {
+static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
.mode = mx21ads_modes,
.num_modes = ARRAY_SIZE(mx21ads_modes),
@@ -233,15 +230,8 @@
static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- int ret;
-
- ret = request_irq(IRQ_GPIOD(25), detect_irq,
+ return request_irq(IRQ_GPIOD(25), detect_irq,
IRQF_TRIGGER_FALLING, "mmc-detect", data);
- if (ret)
- goto out;
- return 0;
-out:
- return ret;
}
static void mx21ads_sdhc_exit(struct device *dev, void *data)
@@ -249,7 +239,7 @@
free_irq(IRQ_GPIOD(25), data);
}
-static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
.get_ro = mx21ads_sdhc_get_ro,
.init = mx21ads_sdhc_init,
@@ -296,8 +286,8 @@
imx21_add_imx_uart0(&uart_pdata_rts);
imx21_add_imx_uart2(&uart_pdata_norts);
imx21_add_imx_uart3(&uart_pdata_rts);
- mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
- mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+ imx21_add_imx_fb(&mx21ads_fb_data);
+ imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
similarity index 86%
rename from arch/arm/mach-mx25/mach-mx25_3ds.c
rename to arch/arm/mach-imx/mach-mx25_3ds.c
index f8be1eb..aa76cfd 100644
--- a/arch/arm/mach-mx25/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -30,6 +30,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/usb/otg.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -39,17 +40,15 @@
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/mx25.h>
-#include <mach/imxfb.h>
#include <mach/iomux-mx25.h>
#include "devices-imx25.h"
-#include "devices.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct pad_desc mx25pdk_pads[] = {
+static iomux_v3_cfg_t mx25pdk_pads[] = {
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
@@ -107,7 +106,7 @@
};
static const struct fec_platform_data mx25_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
+ .phy = PHY_INTERFACE_MODE_RMII,
};
#define FEC_ENABLE_GPIO 35
@@ -154,7 +153,7 @@
},
};
-static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
.mode = mx25pdk_modes,
.num_modes = ARRAY_SIZE(mx25pdk_modes),
.pwmr = 0x00A903FF,
@@ -181,28 +180,39 @@
KEY(3, 3, KEY_POWER),
};
-static struct matrix_keymap_data mx25pdk_keymap_data = {
+static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
.keymap = mx25pdk_keymap,
.keymap_size = ARRAY_SIZE(mx25pdk_keymap),
};
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+ .portsc = MXC_EHCI_MODE_SERIAL,
+ .flags = MXC_EHCI_INTERNAL_PHY,
+};
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI,
+};
+
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
ARRAY_SIZE(mx25pdk_pads));
imx25_add_imx_uart0(&uart_pdata);
- mxc_register_device(&mxc_usbh2, NULL);
+ imx25_add_fsl_usb2_udc(&otg_device_pdata);
+ imx25_add_mxc_ehci_hs(&usbh2_pdata);
imx25_add_mxc_nand(&mx25pdk_nand_board_info);
- mxc_register_device(&mx25_rtc_device, NULL);
- mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
- mxc_register_device(&mxc_wdt, NULL);
+ imx25_add_imxdi_rtc(NULL);
+ imx25_add_imx_fb(&mx25pdk_fb_pdata);
+ imx25_add_imx2_wdt(NULL);
mx25pdk_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
- mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
+ imx25_add_imx_keypad(&mx25pdk_keymap_data);
- imx25_add_esdhc(0, NULL);
+ imx25_add_sdhci_esdhc_imx(0, NULL);
}
static void __init mx25pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 84a5ba03..6fd0f8f 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -22,20 +22,27 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/input/matrix_keypad.h>
#include <linux/irq.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
-#include <mach/mmc.h>
+#include <mach/ulpi.h>
#include "devices-imx27.h"
-#include "devices.h"
#define SD1_EN_GPIO (GPIO_PORTB + 25)
+#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
+#define SPI2_SS0 (GPIO_PORTD + 21)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
@@ -70,6 +77,24 @@
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
+ /* OTG */
+ OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT,
+ PC7_PF_USBOTG_DATA5,
+ PC8_PF_USBOTG_DATA6,
+ PC9_PF_USBOTG_DATA0,
+ PC10_PF_USBOTG_DATA2,
+ PC11_PF_USBOTG_DATA1,
+ PC12_PF_USBOTG_DATA4,
+ PC13_PF_USBOTG_DATA3,
+ PE0_PF_USBOTG_NXT,
+ PE1_PF_USBOTG_STP,
+ PE2_PF_USBOTG_DIR,
+ PE24_PF_USBOTG_CLK,
+ PE25_PF_USBOTG_DATA7,
+ /* CSPI2 */
+ PD22_PF_CSPI2_SCLK,
+ PD23_PF_CSPI2_MISO,
+ PD24_PF_CSPI2_MOSI,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -92,7 +117,7 @@
KEY(2, 3, KEY_F10),
};
-static struct matrix_keymap_data mx27_3ds_keymap_data = {
+static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
.keymap = mx27_3ds_keymap,
.keymap_size = ARRAY_SIZE(mx27_3ds_keymap),
};
@@ -109,7 +134,7 @@
free_irq(IRQ_GPIOB(26), data);
}
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
.init = mx27_3ds_sdhc1_init,
.exit = mx27_3ds_sdhc1_exit,
};
@@ -121,6 +146,111 @@
gpio_direction_output(SD1_EN_GPIO, 1);
}
+
+static int otg_phy_init(void)
+{
+ gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset");
+ gpio_direction_output(OTG_PHY_RESET_GPIO, 0);
+ mdelay(1);
+ gpio_set_value(OTG_PHY_RESET_GPIO, 1);
+ return 0;
+}
+
+#if defined(CONFIG_USB_ULPI)
+
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init mx27_3ds_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", mx27_3ds_otg_mode);
+
+/* Regulators */
+static struct regulator_consumer_supply vmmc1_consumers[] = {
+ REGULATOR_SUPPLY("lcd_2v8", NULL),
+};
+
+static struct regulator_init_data vmmc1_init = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
+ .consumer_supplies = vmmc1_consumers,
+};
+
+static struct regulator_consumer_supply vgen_consumers[] = {
+ REGULATOR_SUPPLY("vdd_lcdio", NULL),
+};
+
+static struct regulator_init_data vgen_init = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
+ .consumer_supplies = vgen_consumers,
+};
+
+static struct mc13783_regulator_init_data mx27_3ds_regulators[] = {
+ {
+ .id = MC13783_REGU_VMMC1,
+ .init_data = &vmmc1_init,
+ }, {
+ .id = MC13783_REGU_VGEN,
+ .init_data = &vgen_init,
+ },
+};
+
+/* MC13783 */
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+ .regulators = mx27_3ds_regulators,
+ .num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
+ .flags = MC13783_USE_REGULATOR,
+};
+
+/* SPI */
+static int spi2_internal_chipselect[] = {SPI2_SS0};
+
+static const struct spi_imx_master spi2_pdata __initconst = {
+ .chipselect = spi2_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi2_internal_chipselect),
+};
+
+static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0, /* SS0 */
+ .platform_data = &mc13783_pdata,
+ .irq = IRQ_GPIOC(14),
+ .mode = SPI_CS_HIGH,
+ },
+};
+
+
static void __init mx27pdk_init(void)
{
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
@@ -128,8 +258,24 @@
mx27_3ds_sdhc1_enable_level_translator();
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
- mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
- mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+ imx27_add_imx_keypad(&mx27_3ds_keymap_data);
+ imx27_add_mxc_mmc(0, &sdhc1_pdata);
+ imx27_add_imx2_wdt(NULL);
+ otg_phy_init();
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+ imx27_add_mxc_ehci_otg(&otg_pdata);
+ }
+#endif
+ if (!otg_mode_host)
+ imx27_add_fsl_usb2_udc(&otg_device_pdata);
+
+ imx27_add_spi_imx1(&spi2_pdata);
+ spi_register_board_info(mx27_3ds_spi_devs,
+ ARRAY_SIZE(mx27_3ds_spi_devs));
}
static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index a1e4bc5..b832f96 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -30,11 +30,8 @@
#include <mach/gpio.h>
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
#include "devices-imx27.h"
-#include "devices.h"
/*
* Base address of PBC controller, CS4
@@ -228,7 +225,7 @@
},
};
-static struct imx_fb_platform_data mx27ads_fb_data = {
+static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
.mode = mx27ads_modes,
.num_modes = ARRAY_SIZE(mx27ads_modes),
@@ -272,19 +269,18 @@
free_irq(IRQ_GPIOB(7), data);
}
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
.init = mx27ads_sdhc1_init,
.exit = mx27ads_sdhc1_exit,
};
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
.init = mx27ads_sdhc2_init,
.exit = mx27ads_sdhc2_exit,
};
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
- &mxc_w1_master_device,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -308,12 +304,13 @@
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
- mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
- mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
- mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+ imx27_add_imx_fb(&mx27ads_fb_data);
+ imx27_add_mxc_mmc(0, &sdhc1_pdata);
+ imx27_add_mxc_mmc(1, &sdhc2_pdata);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx27_add_mxc_w1(NULL);
}
static void __init mx27ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 38d3a4a..4ce71b0 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -31,11 +31,8 @@
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
#include <linux/i2c/pca953x.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int mxt_td60_pins[] __initconst = {
/* UART0 */
@@ -196,7 +193,7 @@
},
};
-static struct imx_fb_platform_data mxt_td60_fb_data = {
+static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
.mode = mxt_td60_modes,
.num_modes = ARRAY_SIZE(mxt_td60_modes),
@@ -226,7 +223,7 @@
free_irq(IRQ_GPIOF(8), data);
}
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
.init = mxt_td60_sdhc1_init,
.exit = mxt_td60_sdhc1_exit,
};
@@ -253,8 +250,8 @@
imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
- mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
- mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+ imx27_add_imx_fb(&mxt_td60_fb_data);
+ imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_fec(NULL);
}
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 8c720d4..cccc0a0 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -29,7 +29,6 @@
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -40,13 +39,9 @@
#include <mach/audmux.h>
#include <mach/mxc_nand.h>
#include <mach/irqs.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
-#include <mach/imxfb.h>
#include "devices-imx27.h"
-#include "devices.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
@@ -171,11 +166,6 @@
.hw_ecc = 1,
};
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_w1_master_device,
- &mxc_wdt,
-};
-
static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
.bitrate = 100000,
};
@@ -274,7 +264,7 @@
free_irq(IRQ_GPIOC(29), data);
}
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.init = pca100_sdhc2_init,
.exit = pca100_sdhc2_exit,
};
@@ -286,7 +276,7 @@
return 0;
}
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -298,14 +288,14 @@
return 0;
}
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
@@ -355,7 +345,7 @@
},
};
-static struct imx_fb_platform_data pca100_fb_data = {
+static const struct imx_fb_platform_data pca100_fb_data __initconst = {
.mode = pca100_fb_modes,
.num_modes = ARRAY_SIZE(pca100_fb_modes),
@@ -389,7 +379,7 @@
imx27_add_imx_uart0(&uart_pdata);
- mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+ imx27_add_mxc_mmc(1, &sdhc_pdata);
imx27_add_mxc_nand(&pca100_nand_board_info);
@@ -417,23 +407,24 @@
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx27_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
if (!otg_mode_host) {
gpio_set_value(OTG_PHY_CS_GPIO, 0);
- mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+ imx27_add_fsl_usb2_udc(&otg_device_pdata);
}
- mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+ imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx27_add_imx2_wdt(NULL);
+ imx27_add_mxc_w1(NULL);
}
static void __init pca100_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 49a97ce..f667a26 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -37,11 +37,9 @@
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int pcm038_pins[] __initconst = {
/* UART1 */
@@ -172,9 +170,7 @@
static struct platform_device *platform_devices[] __initdata = {
&pcm038_nor_mtd_device,
- &mxc_w1_master_device,
&pcm038_sram_mtd_device,
- &mxc_wdt,
};
/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
@@ -214,7 +210,7 @@
static struct regulator_consumer_supply sdhc1_consumers[] = {
{
- .dev = &mxc_sdhc_device1.dev,
+ .dev_name = "mxc-mmc.1",
.supply = "sdhc_vcc",
},
};
@@ -285,7 +281,7 @@
}
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
@@ -322,10 +318,12 @@
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx27_add_imx2_wdt(NULL);
+ imx27_add_mxc_w1(NULL);
#ifdef CONFIG_MACH_PCM970_BASEBOARD
pcm970_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 1fbdd3f..eae878f 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -25,7 +25,6 @@
#include <mach/iomux-mx1.h>
#include "devices-imx1.h"
-#include "devices.h"
/*
* This scb9328 has a 32MiB flash
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 9be92b9..729ae09 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -25,12 +25,7 @@
#include <mach/hardware.h>
static struct map_desc imx_io_desc[] __initdata = {
- {
- .virtual = MX1_IO_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
- .length = MX1_IO_SIZE,
- .type = MT_DEVICE
- }
+ imx_map_entry(MX1, IO, MT_DEVICE),
};
void __init mx1_map_io(void)
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 12faeeaa..e728af8 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -35,33 +35,18 @@
* - ROM Patch
* - and some reserved space
*/
- {
- .virtual = MX21_AIPI_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
- .length = MX21_AIPI_SIZE,
- .type = MT_DEVICE
- },
+ imx_map_entry(MX21, AIPI, MT_DEVICE),
/*
* this fixed mapping covers:
* - CSI
* - ATA
*/
- {
- .virtual = MX21_SAHB1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
- .length = MX21_SAHB1_SIZE,
- .type = MT_DEVICE
- },
+ imx_map_entry(MX21, SAHB1, MT_DEVICE),
/*
* this fixed mapping covers:
* - EMI
*/
- {
- .virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
- .length = MX21_X_MEMC_SIZE,
- .type = MT_DEVICE
- },
+ imx_map_entry(MX21, X_MEMC, MT_DEVICE),
};
/*
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-imx/mm-imx25.c
similarity index 68%
rename from arch/arm/mach-mx25/mm.c
rename to arch/arm/mach-imx/mm-imx25.c
index bb67711..2edec6c 100644
--- a/arch/arm/mach-mx25/mm.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -30,25 +30,12 @@
/*
* This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX3 boards.
+ * These are the mappings common across all MX25 boards.
*/
-static struct map_desc mxc_io_desc[] __initdata = {
- {
- .virtual = MX25_AVIC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX25_AVIC_BASE_ADDR),
- .length = MX25_AVIC_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = MX25_AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
- .length = MX25_AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = MX25_AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
- .length = MX25_AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
+static struct map_desc mx25_io_desc[] __initdata = {
+ imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
};
/*
@@ -62,14 +49,14 @@
mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+ iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
}
int imx25_register_gpios(void);
void __init mx25_init_irq(void)
{
- mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+ mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
imx25_register_gpios();
}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index a246229..374e48b 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -35,33 +35,18 @@
* - ROM Patch
* - and some reserved space
*/
- {
- .virtual = MX27_AIPI_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
- .length = MX27_AIPI_SIZE,
- .type = MT_DEVICE
- },
+ imx_map_entry(MX27, AIPI, MT_DEVICE),
/*
* this fixed mapping covers:
* - CSI
* - ATA
*/
- {
- .virtual = MX27_SAHB1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
- .length = MX27_SAHB1_SIZE,
- .type = MT_DEVICE
- },
+ imx_map_entry(MX27, SAHB1, MT_DEVICE),
/*
* this fixed mapping covers:
* - EMI
*/
- {
- .virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
- .length = MX27_X_MEMC_SIZE,
- .type = MT_DEVICE
- },
+ imx_map_entry(MX27, X_MEMC, MT_DEVICE),
};
/*
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index 9110d9c..99afbc3 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -25,11 +25,9 @@
#include <mach/common.h>
#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include "devices.h"
+#include "devices-imx27.h"
static const int pcm970_pins[] __initconst = {
/* SDHC */
@@ -119,7 +117,7 @@
gpio_free(GPIO_PORTC + 28);
}
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.get_ro = pcm970_sdhc2_get_ro,
.init = pcm970_sdhc2_init,
.exit = pcm970_sdhc2_exit,
@@ -179,7 +177,7 @@
},
};
-static struct imx_fb_platform_data pcm038_fb_data = {
+static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
.mode = pcm970_modes,
.num_modes = ARRAY_SIZE(pcm970_modes),
@@ -226,8 +224,8 @@
mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
"PCM970");
- mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+ imx27_add_imx_fb(&pcm038_fb_data);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
- mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+ imx27_add_mxc_mmc(1, &sdhc_pdata);
platform_device_register(&pcm970_sja1000);
}
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index afc17ce..6bf81ce 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -39,6 +39,9 @@
static int __init mx27_pm_init(void)
{
+ if (!cpu_is_mx27())
+ return 0;
+
suspend_set_ops(&mx27_suspend_ops);
return 0;
}
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3410633..7fc603b 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -45,18 +45,18 @@
Marvell GuruPlug Reference Board.
config MACH_TS219
- bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
+ bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
- QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
- devices.
+ QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+ TS-219P+ Turbo NAS devices.
config MACH_TS41X
- bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+ bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
- QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
- devices.
+ QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
+ NAS devices.
config MACH_DOCKSTAR
bool "Seagate FreeAgent DockStar"
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 6710bd7..dc999c4 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -80,15 +80,19 @@
MPP11_UART0_RXD,
MPP13_UART1_TXD, /* PIC controller */
MPP14_UART1_RXD, /* PIC controller */
- MPP15_GPIO, /* USB Copy button */
- MPP16_GPIO, /* Reset button */
+ MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
+ MPP16_GPIO, /* Reset button (on devices with 88F6281) */
MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
+ MPP37_GPIO, /* Reset button (on devices with 88F6282) */
+ MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
0
};
static void __init qnap_ts219_init(void)
{
+ u32 dev, rev;
+
/*
* Basic setup. Needs to be called early.
*/
@@ -100,6 +104,14 @@
qnap_tsx1x_register_flash();
kirkwood_i2c_init();
i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID) {
+ qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
+ qnap_ts219_buttons[1].gpio = 37; /* Reset button */
+ qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+ }
+
kirkwood_ge00_init(&qnap_ts219_ge00_data);
kirkwood_sata_init(&qnap_ts219_sata_data);
kirkwood_ehci_init();
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 3587a28..9a44029 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -119,6 +119,8 @@
static void __init qnap_ts41x_init(void)
{
+ u32 dev, rev;
+
/*
* Basic setup. Needs to be called early.
*/
@@ -130,8 +132,15 @@
qnap_tsx1x_register_flash();
kirkwood_i2c_init();
i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID) {
+ qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+ qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+ }
kirkwood_ge00_init(&qnap_ts41x_ge00_data);
kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+
kirkwood_sata_init(&qnap_ts41x_sata_data);
kirkwood_ehci_init();
platform_device_register(&qnap_ts41x_button_device);
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 0711d3b..67793a6 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -37,25 +37,38 @@
Say 'Y' here if you want to support the Marvell PXA910-based
TTC_DKB Development Board.
+config MACH_BROWNSTONE
+ bool "Marvell's Brownstone Development Platform"
+ depends on !CPU_MOHAWK
+ select CPU_MMP2
+ help
+ Say 'Y' here if you want to support the Marvell MMP2-based
+ Brown Development Platform.
+ MMP2-based board can't be co-existed with PXA168-based &
+ PXA910-based development board. Since MMP2 is compatible to
+ ARMv7 architecture.
+
config MACH_FLINT
bool "Marvell's Flint Development Platform"
+ depends on !CPU_MOHAWK
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
Flint Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
- ARMv6 architecture.
+ ARMv7 architecture.
config MACH_MARVELL_JASPER
bool "Marvell's Jasper Development Platform"
+ depends on !CPU_MOHAWK
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-base
Jasper Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
- ARMv6 architecture.
+ ARMv7 architecture.
config MACH_TETON_BGA
bool "Marvell's PXA168 Teton BGA Development Board"
@@ -80,8 +93,7 @@
config CPU_MMP2
bool
- select CPU_V6
- select CPU_32v6K
+ select CPU_PJ4
help
- Select code specific to MMP2. MMP2 is ARMv6 compatible.
+ Select code specific to MMP2. MMP2 is ARMv7 compatible.
endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 751cdbf..5c68382 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
+obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
new file mode 100644
index 0000000..7bb78fd
--- /dev/null
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -0,0 +1,204 @@
+/*
+ * linux/arch/arm/mach-mmp/brownstone.c
+ *
+ * Support for the Marvell Brownstone Development Platform.
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max8649.h>
+#include <linux/regulator/fixed.h>
+#include <linux/mfd/max8925.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+#define BROWNSTONE_NR_IRQS (IRQ_BOARD_START + 40)
+
+#define GPIO_5V_ENABLE (89)
+
+static unsigned long brownstone_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO29_UART1_RXD,
+ GPIO30_UART1_TXD,
+
+ /* UART3 */
+ GPIO51_UART3_RXD,
+ GPIO52_UART3_TXD,
+
+ /* DFI */
+ GPIO168_DFI_D0,
+ GPIO167_DFI_D1,
+ GPIO166_DFI_D2,
+ GPIO165_DFI_D3,
+ GPIO107_DFI_D4,
+ GPIO106_DFI_D5,
+ GPIO105_DFI_D6,
+ GPIO104_DFI_D7,
+ GPIO111_DFI_D8,
+ GPIO164_DFI_D9,
+ GPIO163_DFI_D10,
+ GPIO162_DFI_D11,
+ GPIO161_DFI_D12,
+ GPIO110_DFI_D13,
+ GPIO109_DFI_D14,
+ GPIO108_DFI_D15,
+ GPIO143_ND_nCS0,
+ GPIO144_ND_nCS1,
+ GPIO147_ND_nWE,
+ GPIO148_ND_nRE,
+ GPIO150_ND_ALE,
+ GPIO149_ND_CLE,
+ GPIO112_ND_RDY0,
+ GPIO160_ND_RDY1,
+
+ /* PMIC */
+ PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+
+ /* MMC0 */
+ GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
+ GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
+ GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
+ GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
+ GPIO136_MMC1_CMD | MFP_PULL_HIGH,
+ GPIO139_MMC1_CLK,
+ GPIO140_MMC1_CD | MFP_PULL_LOW,
+ GPIO141_MMC1_WP | MFP_PULL_LOW,
+
+ /* MMC1 */
+ GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
+ GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
+ GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
+ GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
+ GPIO41_MMC2_CMD | MFP_PULL_HIGH,
+ GPIO42_MMC2_CLK,
+
+ /* MMC2 */
+ GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
+ GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
+ GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
+ GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
+ GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
+ GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
+ GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
+ GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
+ GPIO112_MMC3_CMD | MFP_PULL_HIGH,
+ GPIO151_MMC3_CLK,
+
+ /* 5V regulator */
+ GPIO89_GPIO,
+};
+
+static struct regulator_consumer_supply max8649_supply[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data max8649_init_data = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 1150000,
+ .max_uV = 1280000,
+ .always_on = 1,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8649_supply[0],
+};
+
+static struct max8649_platform_data brownstone_max8649_info = {
+ .mode = 2, /* VID1 = 1, VID0 = 0 */
+ .extclk = 0,
+ .ramp_timing = MAX8649_RAMP_32MV,
+ .regulator = &max8649_init_data,
+};
+
+static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
+ REGULATOR_SUPPLY("v_5vp", NULL),
+};
+
+static struct regulator_init_data brownstone_v_5vp_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(brownstone_v_5vp_supplies),
+ .consumer_supplies = brownstone_v_5vp_supplies,
+};
+
+static struct fixed_voltage_config brownstone_v_5vp = {
+ .supply_name = "v_5vp",
+ .microvolts = 5000000,
+ .gpio = GPIO_5V_ENABLE,
+ .enable_high = 1,
+ .enabled_at_boot = 1,
+ .init_data = &brownstone_v_5vp_data,
+};
+
+static struct platform_device brownstone_v_5vp_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &brownstone_v_5vp,
+ },
+};
+
+static struct max8925_platform_data brownstone_max8925_info = {
+ .irq_base = IRQ_BOARD_START,
+};
+
+static struct i2c_board_info brownstone_twsi1_info[] = {
+ [0] = {
+ .type = "max8649",
+ .addr = 0x60,
+ .platform_data = &brownstone_max8649_info,
+ },
+ [1] = {
+ .type = "max8925",
+ .addr = 0x3c,
+ .irq = IRQ_MMP2_PMIC,
+ .platform_data = &brownstone_max8925_info,
+ },
+};
+
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
+ .max_speed = 25000000,
+};
+
+static void __init brownstone_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
+
+ /* on-chip devices */
+ mmp2_add_uart(1);
+ mmp2_add_uart(3);
+ mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
+ mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
+
+ /* enable 5v regulator */
+ platform_device_register(&brownstone_v_5vp_device);
+}
+
+MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
+ /* Maintainer: Haojian Zhuang <haojian.zhuang@marvell.com> */
+ .map_io = mmp_map_io,
+ .nr_irqs = BROWNSTONE_NR_IRQS,
+ .init_irq = mmp2_init_irq,
+ .timer = &mmp2_timer,
+ .init_machine = brownstone_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index bdeb6db..c4fd806 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -47,7 +47,7 @@
GPIO113_SMC_RDY,
/*Ethernet*/
- GPIO155_GPIO155,
+ GPIO155_GPIO,
/* DFI */
GPIO168_DFI_D0,
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
index 761c2da..117e303 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -9,175 +9,175 @@
#define MFP_DRIVE_FAST (0x8 << 13)
/* GPIO */
-#define GPIO0_GPIO0 MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO1 MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO2 MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO3 MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO4 MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO5 MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO6 MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO7 MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO8 MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO9 MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO10 MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO11 MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO12 MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO13 MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO14 MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO15 MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO16 MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO17 MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO18 MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO19 MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO20 MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO24 MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO25 MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO26 MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO27 MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO28 MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO29 MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO30 MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO31 MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO32 MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO33 MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO34 MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO35 MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO36 MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO37 MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO38 MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO39 MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO40 MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO41 MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO42 MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO43 MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO44 MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO47 MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO48 MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO49 MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO50 MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO51 MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO52 MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO53 MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO54 MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO59 MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO60 MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO61 MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO62 MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO63 MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO64 MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO65 MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO66 MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO67 MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO68 MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO69 MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO70 MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO71 MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO72 MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO73 MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO74 MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO75 MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO76 MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO77 MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO78 MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO79 MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO80 MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO81 MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO82 MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO83 MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO84 MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO85 MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO86 MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO87 MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO88 MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO89 MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO90 MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO91 MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO92 MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO93 MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO94 MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO95 MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO96 MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO97 MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO98 MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO99 MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO100 MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO102 MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO103 MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO104 MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO105 MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO106 MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO107 MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO108 MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO109 MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO110 MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO111 MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO112 MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO113 MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO114 MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO115 MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO116 MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO117 MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO118 MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO119 MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO120 MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO121 MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO122 MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO123 MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO124 MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO125 MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO126 MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO127 MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO128 MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO129 MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO130 MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO131 MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO132 MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO133 MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO134 MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO135 MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO136 MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO137 MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO138 MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO139 MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO140 MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO141 MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO142 MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO143 MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO144 MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO145 MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO146 MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO147 MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO148 MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO149 MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO150 MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO151 MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO152 MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO153 MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO154 MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO156 MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO157 MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO158 MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO159 MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO160 MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO161 MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO162 MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO163 MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO164 MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO165 MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO166 MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO167 MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO168 MFP_CFG(GPIO168, AF1)
+#define GPIO0_GPIO MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG(GPIO102, AF1)
+#define GPIO103_GPIO MFP_CFG(GPIO103, AF1)
+#define GPIO104_GPIO MFP_CFG(GPIO104, AF1)
+#define GPIO105_GPIO MFP_CFG(GPIO105, AF1)
+#define GPIO106_GPIO MFP_CFG(GPIO106, AF1)
+#define GPIO107_GPIO MFP_CFG(GPIO107, AF1)
+#define GPIO108_GPIO MFP_CFG(GPIO108, AF1)
+#define GPIO109_GPIO MFP_CFG(GPIO109, AF1)
+#define GPIO110_GPIO MFP_CFG(GPIO110, AF1)
+#define GPIO111_GPIO MFP_CFG(GPIO111, AF1)
+#define GPIO112_GPIO MFP_CFG(GPIO112, AF1)
+#define GPIO113_GPIO MFP_CFG(GPIO113, AF1)
+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO MFP_CFG(GPIO127, AF0)
+#define GPIO128_GPIO MFP_CFG(GPIO128, AF0)
+#define GPIO129_GPIO MFP_CFG(GPIO129, AF0)
+#define GPIO130_GPIO MFP_CFG(GPIO130, AF0)
+#define GPIO131_GPIO MFP_CFG(GPIO131, AF0)
+#define GPIO132_GPIO MFP_CFG(GPIO132, AF0)
+#define GPIO133_GPIO MFP_CFG(GPIO133, AF0)
+#define GPIO134_GPIO MFP_CFG(GPIO134, AF0)
+#define GPIO135_GPIO MFP_CFG(GPIO135, AF0)
+#define GPIO136_GPIO MFP_CFG(GPIO136, AF0)
+#define GPIO137_GPIO MFP_CFG(GPIO137, AF0)
+#define GPIO138_GPIO MFP_CFG(GPIO138, AF0)
+#define GPIO139_GPIO MFP_CFG(GPIO139, AF0)
+#define GPIO140_GPIO MFP_CFG(GPIO140, AF0)
+#define GPIO141_GPIO MFP_CFG(GPIO141, AF0)
+#define GPIO142_GPIO MFP_CFG(GPIO142, AF1)
+#define GPIO143_GPIO MFP_CFG(GPIO143, AF1)
+#define GPIO144_GPIO MFP_CFG(GPIO144, AF1)
+#define GPIO145_GPIO MFP_CFG(GPIO145, AF1)
+#define GPIO146_GPIO MFP_CFG(GPIO146, AF1)
+#define GPIO147_GPIO MFP_CFG(GPIO147, AF1)
+#define GPIO148_GPIO MFP_CFG(GPIO148, AF1)
+#define GPIO149_GPIO MFP_CFG(GPIO149, AF1)
+#define GPIO150_GPIO MFP_CFG(GPIO150, AF1)
+#define GPIO151_GPIO MFP_CFG(GPIO151, AF1)
+#define GPIO152_GPIO MFP_CFG(GPIO152, AF1)
+#define GPIO153_GPIO MFP_CFG(GPIO153, AF1)
+#define GPIO154_GPIO MFP_CFG(GPIO154, AF1)
+#define GPIO155_GPIO MFP_CFG(GPIO155, AF1)
+#define GPIO156_GPIO MFP_CFG(GPIO156, AF1)
+#define GPIO157_GPIO MFP_CFG(GPIO157, AF1)
+#define GPIO158_GPIO MFP_CFG(GPIO158, AF1)
+#define GPIO159_GPIO MFP_CFG(GPIO159, AF1)
+#define GPIO160_GPIO MFP_CFG(GPIO160, AF1)
+#define GPIO161_GPIO MFP_CFG(GPIO161, AF1)
+#define GPIO162_GPIO MFP_CFG(GPIO162, AF1)
+#define GPIO163_GPIO MFP_CFG(GPIO163, AF1)
+#define GPIO164_GPIO MFP_CFG(GPIO164, AF1)
+#define GPIO165_GPIO MFP_CFG(GPIO165, AF1)
+#define GPIO166_GPIO MFP_CFG(GPIO166, AF1)
+#define GPIO167_GPIO MFP_CFG(GPIO167, AF1)
+#define GPIO168_GPIO MFP_CFG(GPIO168, AF1)
/* DFI */
#define GPIO108_DFI_D15 MFP_CFG(GPIO108, AF0)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index dbba6e8..4aec493 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -1,6 +1,8 @@
#ifndef __ASM_MACH_MMP2_H
#define __ASM_MACH_MMP2_H
+#include <plat/sdhci.h>
+
struct sys_timer;
extern struct sys_timer mmp2_timer;
@@ -22,6 +24,10 @@
extern struct pxa_device_desc mmp2_device_twsi4;
extern struct pxa_device_desc mmp2_device_twsi5;
extern struct pxa_device_desc mmp2_device_twsi6;
+extern struct pxa_device_desc mmp2_device_sdh0;
+extern struct pxa_device_desc mmp2_device_sdh1;
+extern struct pxa_device_desc mmp2_device_sdh2;
+extern struct pxa_device_desc mmp2_device_sdh3;
static inline int mmp2_add_uart(int id)
{
@@ -63,5 +69,21 @@
return pxa_register_device(d, data, sizeof(*data));
}
+static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 0: d = &mmp2_device_sdh0; break;
+ case 1: d = &mmp2_device_sdh1; break;
+ case 2: d = &mmp2_device_sdh2; break;
+ case 3: d = &mmp2_device_sdh3; break;
+ default:
+ return -EINVAL;
+ }
+
+ return pxa_register_device(d, data, sizeof(*data));
+}
+
#endif /* __ASM_MACH_MMP2_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index ac47023..f7011ef 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -27,6 +27,8 @@
#define APMU_DMA APMU_REG(0x064)
#define APMU_GEU APMU_REG(0x068)
#define APMU_BUS APMU_REG(0x06c)
+#define APMU_SDH2 APMU_REG(0x0e8)
+#define APMU_SDH3 APMU_REG(0x0ec)
#define APMU_FNCLK_EN (1 << 4)
#define APMU_AXICLK_EN (1 << 3)
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 2a684fa..24172a0 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -67,6 +67,36 @@
/* PMIC */
PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+
+ /* MMC1 */
+ GPIO131_MMC1_DAT3,
+ GPIO132_MMC1_DAT2,
+ GPIO133_MMC1_DAT1,
+ GPIO134_MMC1_DAT0,
+ GPIO136_MMC1_CMD,
+ GPIO139_MMC1_CLK,
+ GPIO140_MMC1_CD,
+ GPIO141_MMC1_WP,
+
+ /* MMC2 */
+ GPIO37_MMC2_DAT3,
+ GPIO38_MMC2_DAT2,
+ GPIO39_MMC2_DAT1,
+ GPIO40_MMC2_DAT0,
+ GPIO41_MMC2_CMD,
+ GPIO42_MMC2_CLK,
+
+ /* MMC3 */
+ GPIO165_MMC3_DAT7,
+ GPIO162_MMC3_DAT6,
+ GPIO166_MMC3_DAT5,
+ GPIO163_MMC3_DAT4,
+ GPIO167_MMC3_DAT3,
+ GPIO164_MMC3_DAT2,
+ GPIO168_MMC3_DAT1,
+ GPIO111_MMC3_DAT0,
+ GPIO112_MMC3_CMD,
+ GPIO151_MMC3_CLK,
};
static struct regulator_consumer_supply max8649_supply[] = {
@@ -123,6 +153,10 @@
},
};
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
+ .max_speed = 25000000,
+};
+
static void __init jasper_init(void)
{
mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
@@ -131,6 +165,7 @@
mmp2_add_uart(1);
mmp2_add_uart(3);
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
+ mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
regulator_has_full_constraints();
}
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 2e3dd08..8e6c3ac 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -115,6 +115,29 @@
mmp2_init_gpio();
}
+static void sdhc_clk_enable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst |= clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void sdhc_clk_disable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst &= ~clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+struct clkops sdhc_clk_ops = {
+ .enable = sdhc_clk_enable,
+ .disable = sdhc_clk_disable,
+};
+
/* APB peripheral clocks */
static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
@@ -128,6 +151,10 @@
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
static APMU_CLK(nand, NAND, 0xbf, 100000000);
+static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
static struct clk_lookup mmp2_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -141,6 +168,10 @@
INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_sdh0, "sdhci-pxa.0", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh1, "sdhci-pxa.1", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh2, "sdhci-pxa.2", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh3, "sdhci-pxa.3", "PXA-SDHCLK"),
};
static int __init mmp2_init(void)
@@ -191,4 +222,8 @@
MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
+MMP2_DEVICE(sdh0, "sdhci-pxa", 0, MMC, 0xd4280000, 0x120);
+MMP2_DEVICE(sdh1, "sdhci-pxa", 1, MMC2, 0xd4280800, 0x120);
+MMP2_DEVICE(sdh2, "sdhci-pxa", 2, MMC3, 0xd4281000, 0x120);
+MMP2_DEVICE(sdh3, "sdhci-pxa", 3, MMC4, 0xd4281800, 0x120);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 46f2d69..8f92ccd 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -111,6 +111,7 @@
static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(u2o, USB, 0x1b, 480000000);
/* device and clock bindings */
static struct clk_lookup pxa910_clkregs[] = {
@@ -123,6 +124,7 @@
INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
};
static int __init pxa910_init(void)
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 788bdac..3eff399 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -65,7 +65,7 @@
*/
#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
-#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700)
+#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1570)
#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
deleted file mode 100644
index 38ca09a..0000000
--- a/arch/arm/mach-mx25/Kconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-if ARCH_MX25
-
-comment "MX25 platforms:"
-
-config MACH_MX25_3DS
- bool "Support MX25PDK (3DS) Platform"
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_ESDHC
-
-config MACH_EUKREA_CPUIMX25
- bool "Support Eukrea CPUIMX25 Platform"
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_ESDHC
- select MXC_ULPI if USB_ULPI
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX25
- default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
- bool "Eukrea MBIMXSD development board"
- select IMX_HAVE_PLATFORM_IMX_SSI
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
deleted file mode 100644
index d9e46ce..0000000
--- a/arch/arm/mach-mx25/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y := mm.o devices.o
-obj-$(CONFIG_ARCH_MX25) += clock.o
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
deleted file mode 100644
index e1dd366..0000000
--- a/arch/arm/mach-mx25/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y := 0x80008000
-params_phys-y := 0x80000100
-initrd_phys-y := 0x80800000
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
deleted file mode 100644
index d94d282..0000000
--- a/arch/arm/mach-mx25/devices-imx25.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx25.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx25_fec_data __initconst;
-#define imx25_add_fec(pdata) \
- imx_add_fec(&imx25_fec_data, pdata)
-
-#define imx25_add_flexcan0(pdata) \
- imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata)
-#define imx25_add_flexcan1(pdata) \
- imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata)
-
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
-#define imx25_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
-#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
-#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
-#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
-#define imx25_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
-#define imx25_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
-#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
-#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
-#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
-#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
-#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
-
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
-#define imx25_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-
-extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
-#define imx25_add_spi_imx(id, pdata) \
- imx_add_spi_imx(&imx25_cspi_data[id], pdata)
-#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
-#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
-#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
-
-extern const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst;
-#define imx25_add_esdhc(id, pdata) \
- imx_add_esdhc(&imx25_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
deleted file mode 100644
index 1d0eb3e..0000000
--- a/arch/arm/mach-mx25/devices.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <mach/mx25.h>
-#include <mach/irqs.h>
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_otg_resources[] = {
- {
- .start = MX25_OTG_BASE_ADDR,
- .end = MX25_OTG_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 37,
- .end = 37,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_otg = {
- .name = "mxc-ehci",
- .id = 0,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- .dma_mask = &otg_dmamask,
- },
- .resource = mxc_otg_resources,
- .num_resources = ARRAY_SIZE(mxc_otg_resources),
-};
-
-/* OTG gadget device */
-struct platform_device otg_udc_device = {
- .name = "fsl-usb2-udc",
- .id = -1,
- .dev = {
- .dma_mask = &otg_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = mxc_otg_resources,
- .num_resources = ARRAY_SIZE(mxc_otg_resources),
-};
-
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
- {
- .start = MX25_OTG_BASE_ADDR + 0x400,
- .end = MX25_OTG_BASE_ADDR + 0x5ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 35,
- .end = 35,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh2 = {
- .name = "mxc-ehci",
- .id = 1,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- .dma_mask = &usbh2_dmamask,
- },
- .resource = mxc_usbh2_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-
-static struct resource mxc_pwm_resources0[] = {
- {
- .start = 0x53fe0000,
- .end = 0x53fe3fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 26,
- .end = 26,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_pwm_device0 = {
- .name = "mxc_pwm",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_pwm_resources0),
- .resource = mxc_pwm_resources0,
-};
-
-static struct resource mxc_pwm_resources1[] = {
- {
- .start = 0x53fa0000,
- .end = 0x53fa3fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 36,
- .end = 36,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_pwm_device1 = {
- .name = "mxc_pwm",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_pwm_resources1),
- .resource = mxc_pwm_resources1,
-};
-
-static struct resource mxc_pwm_resources2[] = {
- {
- .start = 0x53fa8000,
- .end = 0x53fabfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 41,
- .end = 41,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_pwm_device2 = {
- .name = "mxc_pwm",
- .id = 2,
- .num_resources = ARRAY_SIZE(mxc_pwm_resources2),
- .resource = mxc_pwm_resources2,
-};
-
-static struct resource mxc_keypad_resources[] = {
- {
- .start = 0x43fa8000,
- .end = 0x43fabfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 24,
- .end = 24,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_keypad_device = {
- .name = "mxc-keypad",
- .id = -1,
- .num_resources = ARRAY_SIZE(mxc_keypad_resources),
- .resource = mxc_keypad_resources,
-};
-
-static struct resource mxc_pwm_resources3[] = {
- {
- .start = 0x53fc8000,
- .end = 0x53fcbfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 42,
- .end = 42,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_pwm_device3 = {
- .name = "mxc_pwm",
- .id = 3,
- .num_resources = ARRAY_SIZE(mxc_pwm_resources3),
- .resource = mxc_pwm_resources3,
-};
-
-static struct mxc_gpio_port imx_gpio_ports[] = {
- {
- .chip.label = "gpio-0",
- .base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
- .irq = 52,
- .virtual_irq_start = MXC_GPIO_IRQ_START,
- }, {
- .chip.label = "gpio-1",
- .base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
- .irq = 51,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- }, {
- .chip.label = "gpio-2",
- .base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
- .irq = 16,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- }, {
- .chip.label = "gpio-3",
- .base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
- .irq = 23,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- }
-};
-
-int __init imx25_register_gpios(void)
-{
- return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-
-static struct resource mx25_rtc_resources[] = {
- {
- .start = MX25_DRYICE_BASE_ADDR,
- .end = MX25_DRYICE_BASE_ADDR + 0x40,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX25_INT_DRYICE,
- .flags = IORESOURCE_IRQ
- },
-};
-
-struct platform_device mx25_rtc_device = {
- .name = "imxdi_rtc",
- .id = 0,
- .num_resources = ARRAY_SIZE(mx25_rtc_resources),
- .resource = mx25_rtc_resources,
-};
-
-static struct resource mx25_fb_resources[] = {
- {
- .start = MX25_LCDC_BASE_ADDR,
- .end = MX25_LCDC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX25_INT_LCDC,
- .end = MX25_INT_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mx25_fb_device = {
- .name = "imx-fb",
- .id = 0,
- .resource = mx25_fb_resources,
- .num_resources = ARRAY_SIZE(mx25_fb_resources),
- .dev = {
- .coherent_dma_mask = 0xFFFFFFFF,
- },
-};
-
-static struct resource mxc_wdt_resources[] = {
- {
- .start = MX25_WDOG_BASE_ADDR,
- .end = MX25_WDOG_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_wdt = {
- .name = "imx2-wdt",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_wdt_resources),
- .resource = mxc_wdt_resources,
-};
-
-static struct resource mx25_kpp_resources[] = {
- {
- .start = MX25_KPP_BASE_ADDR,
- .end = MX25_KPP_BASE_ADDR + 0xf,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX25_INT_KPP,
- .end = MX25_INT_KPP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mx25_kpp_device = {
- .name = "imx-keypad",
- .id = -1,
- .num_resources = ARRAY_SIZE(mx25_kpp_resources),
- .resource = mx25_kpp_resources,
-};
-
-static struct resource mx25_csi_resources[] = {
- {
- .start = MX25_CSI_BASE_ADDR,
- .end = MX25_CSI_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX25_INT_CSI,
- .flags = IORESOURCE_IRQ
- },
-};
-
-struct platform_device mx25_csi_device = {
- .name = "mx2-camera",
- .id = 0,
- .num_resources = ARRAY_SIZE(mx25_csi_resources),
- .resource = mx25_csi_resources,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
deleted file mode 100644
index 7b70a43..0000000
--- a/arch/arm/mach-mx25/devices.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern struct platform_device mxc_otg;
-extern struct platform_device otg_udc_device;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_pwm_device0;
-extern struct platform_device mxc_pwm_device1;
-extern struct platform_device mxc_pwm_device2;
-extern struct platform_device mxc_pwm_device3;
-extern struct platform_device mxc_keypad_device;
-extern struct platform_device mx25_rtc_device;
-extern struct platform_device mx25_fb_device;
-extern struct platform_device mxc_wdt;
-extern struct platform_device mx25_kpp_device;
-extern struct platform_device mx25_csi_device;
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 5000ac1..0717f88 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,21 +1,35 @@
if ARCH_MX3
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
config ARCH_MX31
- select ARCH_HAS_RNGA
- select ARCH_MXC_AUDMUX_V2
bool
config ARCH_MX35
bool
+
+config SOC_IMX31
+ bool
+ select IMX_HAVE_PLATFORM_MXC_RNGA
+ select ARCH_MXC_AUDMUX_V2
+ select ARCH_MX31
+ select MXC_AVIC
+
+config SOC_IMX35
+ bool
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select HAVE_EPIT
+ select ARCH_MX35
+ select MXC_AVIC
comment "MX3 platforms:"
config MACH_MX31ADS
bool "Support MX31ADS platforms"
- select ARCH_MX31
+ select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
@@ -37,10 +51,15 @@
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
- select ARCH_MX31
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm037 platform. This includes
@@ -57,9 +76,12 @@
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
- select ARCH_MX31
+ select SOC_IMX31
select MXC_ULPI if USB_ULPI
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -68,11 +90,16 @@
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
- select ARCH_MX31
+ select SOC_IMX31
select MXC_DEBUG_BOARD
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
@@ -88,9 +115,12 @@
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
- select ARCH_MX31
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
@@ -99,8 +129,10 @@
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
- select ARCH_MX31
+ select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
@@ -109,7 +141,7 @@
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
- select ARCH_MX31
+ select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
@@ -117,13 +149,16 @@
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
- select ARCH_MX35
+ select SOC_IMX35
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_ESDHC
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
@@ -131,9 +166,11 @@
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
- select ARCH_MX31
+ select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
@@ -142,19 +179,21 @@
config MACH_MX35_3DS
bool "Support MX35PDK platform"
- select ARCH_MX35
+ select SOC_IMX35
select MXC_DEBUG_BOARD
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_ESDHC
- default n
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
- select ARCH_MX31
+ select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for KZM-ARM11-01. This includes specific
@@ -162,12 +201,15 @@
config MACH_EUKREA_CPUIMX35
bool "Support Eukrea CPUIMX35 Platform"
- select ARCH_MX35
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_MXC_NAND
+ select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_ESDHC
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX35 platform. This includes
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 8a182d0a..8db1329 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,17 +5,14 @@
# Object file lists.
obj-y := mm.o devices.o cpu.o
-CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
-obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
+obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o
+obj-$(CONFIG_SOC_IMX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
-CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o mx31moboard-smartbot.o
obj-$(CONFIG_MACH_QONG) += mach-qong.o
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
index 1cd8b40..d423cac 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -530,7 +530,7 @@
_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
_REGISTER_CLOCK(NULL, "epit", epit1_clk)
_REGISTER_CLOCK(NULL, "epit", epit2_clk)
@@ -615,7 +615,7 @@
mx31_read_cpu_rev();
- if (mx31_revision() >= MX31_CHIP_REV_2_0) {
+ if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 819dd80..448a038 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -494,7 +494,7 @@
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
- _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index d00a754..d1d3395 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -25,15 +25,15 @@
};
static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
- { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = MX3x_CHIP_REV_1_0 },
- { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 },
- { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 },
- { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
- { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
- { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 },
- { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 },
- { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 },
- { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 },
+ { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 },
+ { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 },
+ { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 },
+ { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 },
+ { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 },
};
void __init mx31_read_cpu_rev(void)
@@ -53,6 +53,8 @@
return;
}
+ mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+
printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
}
@@ -62,22 +64,25 @@
void __init mx35_read_cpu_rev(void)
{
u32 rev;
- char *srev = "unknown";
+ char *srev;
rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
switch (rev) {
case 0x00:
- mx35_cpu_rev = MX3x_CHIP_REV_1_0;
+ mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
srev = "1.0";
break;
case 0x10:
- mx35_cpu_rev = MX3x_CHIP_REV_2_0;
+ mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
srev = "2.0";
break;
case 0x11:
- mx35_cpu_rev = MX3x_CHIP_REV_2_1;
+ mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
srev = "2.1";
break;
+ default:
+ mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+ srev = "unknown";
}
printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
index de95985..40f4e84 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -9,6 +9,14 @@
#include <mach/mx31.h>
#include <mach/devices-common.h>
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst;
+#define imx31_add_fsl_usb2_udc(pdata) \
+ imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst;
+#define imx31_add_imx2_wdt(pdata) \
+ imx_add_imx2_wdt(&imx31_imx2_wdt_data)
+
extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
#define imx31_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
@@ -16,6 +24,10 @@
#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata)
#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata)
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst;
+#define imx31_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
+
extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
#define imx31_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
@@ -29,10 +41,25 @@
#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata)
#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst;
+#define imx31_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst;
+#define imx31_add_mxc_ehci_hs(id, pdata) \
+ imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst;
+#define imx31_add_mxc_mmc(id, pdata) \
+ imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
+
extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
#define imx31_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst;
+#define imx31_add_mxc_w1(pdata) \
+ imx_add_mxc_w1(&imx31_mxc_w1_data)
+
extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
#define imx31_add_cspi(id, pdata) \
imx_add_spi_imx(&imx31_cspi_data[id], pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index 5eb917b..677b18a 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -13,10 +13,19 @@
#define imx35_add_fec(pdata) \
imx_add_fec(&imx35_fec_data, pdata)
-#define imx35_add_flexcan0(pdata) \
- imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata)
-#define imx35_add_flexcan1(pdata) \
- imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata)
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst;
+#define imx35_add_fsl_usb2_udc(pdata) \
+ imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst;
+#define imx35_add_flexcan(id, pdata) \
+ imx_add_flexcan(&imx35_flexcan_data[id], pdata)
+#define imx35_add_flexcan0(pdata) imx35_add_flexcan(0, pdata)
+#define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata)
+
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst;
+#define imx35_add_imx2_wdt(pdata) \
+ imx_add_imx2_wdt(&imx35_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
#define imx35_add_imx_i2c(id, pdata) \
@@ -25,6 +34,10 @@
#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata)
#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata)
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
+#define imx31_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
+
extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
#define imx35_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
@@ -36,16 +49,28 @@
#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata)
#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst;
+#define imx35_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst;
+#define imx35_add_mxc_ehci_hs(pdata) \
+ imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
+
extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
#define imx35_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst;
+#define imx35_add_mxc_w1(pdata) \
+ imx_add_mxc_w1(&imx35_mxc_w1_data)
+
+extern const struct imx_sdhci_esdhc_imx_data
+imx35_sdhci_esdhc_imx_data[] __initconst;
+#define imx35_add_sdhci_esdhc_imx(id, pdata) \
+ imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
+
extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
#define imx35_add_cspi(id, pdata) \
imx_add_spi_imx(&imx35_cspi_data[id], pdata)
#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata)
-
-extern const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst;
-#define imx35_add_esdhc(id, pdata) \
- imx_add_esdhc(&imx35_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d4da949..b6672db 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -29,120 +29,25 @@
#include "devices.h"
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
- {
- .chip.label = "gpio-0",
- .base = IO_ADDRESS(GPIO1_BASE_ADDR),
- .irq = MXC_INT_GPIO1,
- .virtual_irq_start = MXC_GPIO_IRQ_START,
- }, {
- .chip.label = "gpio-1",
- .base = IO_ADDRESS(GPIO2_BASE_ADDR),
- .irq = MXC_INT_GPIO2,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- }, {
- .chip.label = "gpio-2",
- .base = IO_ADDRESS(GPIO3_BASE_ADDR),
- .irq = MXC_INT_GPIO3,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- }
-};
-
-int __init imx3x_register_gpios(void)
-{
- return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-
-static struct resource mxc_w1_master_resources[] = {
- {
- .start = OWIRE_BASE_ADDR,
- .end = OWIRE_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_w1_master_device = {
- .name = "mxc_w1",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_w1_master_resources),
- .resource = mxc_w1_master_resources,
-};
-
-#ifdef CONFIG_ARCH_MX31
-static struct resource mxcsdhc0_resources[] = {
- {
- .start = MX31_MMC_SDHC1_BASE_ADDR,
- .end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX31_INT_MMC_SDHC1,
- .end = MX31_INT_MMC_SDHC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource mxcsdhc1_resources[] = {
- {
- .start = MX31_MMC_SDHC2_BASE_ADDR,
- .end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX31_INT_MMC_SDHC2,
- .end = MX31_INT_MMC_SDHC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxcsdhc_device0 = {
- .name = "mxc-mmc",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxcsdhc0_resources),
- .resource = mxcsdhc0_resources,
-};
-
-struct platform_device mxcsdhc_device1 = {
- .name = "mxc-mmc",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxcsdhc1_resources),
- .resource = mxcsdhc1_resources,
-};
-
-static struct resource rnga_resources[] = {
- {
- .start = RNGA_BASE_ADDR,
- .end = RNGA_BASE_ADDR + 0x28,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_rnga_device = {
- .name = "mxc_rnga",
- .id = -1,
- .num_resources = 1,
- .resource = rnga_resources,
-};
-#endif /* CONFIG_ARCH_MX31 */
-
/* i.MX31 Image Processing Unit */
/* The resource order is important! */
static struct resource mx3_ipu_rsrc[] = {
{
- .start = IPU_CTRL_BASE_ADDR,
- .end = IPU_CTRL_BASE_ADDR + 0x5F,
+ .start = MX3x_IPU_CTRL_BASE_ADDR,
+ .end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F,
.flags = IORESOURCE_MEM,
}, {
- .start = IPU_CTRL_BASE_ADDR + 0x88,
- .end = IPU_CTRL_BASE_ADDR + 0xB3,
+ .start = MX3x_IPU_CTRL_BASE_ADDR + 0x88,
+ .end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_IPU_SYN,
- .end = MXC_INT_IPU_SYN,
+ .start = MX3x_INT_IPU_SYN,
+ .end = MX3x_INT_IPU_SYN,
.flags = IORESOURCE_IRQ,
}, {
- .start = MXC_INT_IPU_ERR,
- .end = MXC_INT_IPU_ERR,
+ .start = MX3x_INT_IPU_ERR,
+ .end = MX3x_INT_IPU_ERR,
.flags = IORESOURCE_IRQ,
},
};
@@ -156,8 +61,8 @@
static struct resource fb_resources[] = {
{
- .start = IPU_CTRL_BASE_ADDR + 0xB4,
- .end = IPU_CTRL_BASE_ADDR + 0x1BF,
+ .start = MX3x_IPU_CTRL_BASE_ADDR + 0xB4,
+ .end = MX3x_IPU_CTRL_BASE_ADDR + 0x1BF,
.flags = IORESOURCE_MEM,
},
};
@@ -174,8 +79,8 @@
static struct resource camera_resources[] = {
{
- .start = IPU_CTRL_BASE_ADDR + 0x60,
- .end = IPU_CTRL_BASE_ADDR + 0x87,
+ .start = MX3x_IPU_CTRL_BASE_ADDR + 0x60,
+ .end = MX3x_IPU_CTRL_BASE_ADDR + 0x87,
.flags = IORESOURCE_MEM,
},
};
@@ -190,110 +95,6 @@
},
};
-static struct resource otg_resources[] = {
- {
- .start = MX31_OTG_BASE_ADDR,
- .end = MX31_OTG_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_USB3,
- .end = MXC_INT_USB3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
- .name = "fsl-usb2-udc",
- .id = -1,
- .dev = {
- .dma_mask = &otg_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = otg_resources,
- .num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
- .name = "mxc-ehci",
- .id = 0,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- .dma_mask = &otg_dmamask,
- },
- .resource = otg_resources,
- .num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = ~(u32)0;
-
-static struct resource mxc_usbh1_resources[] = {
- {
- .start = MX31_OTG_BASE_ADDR + 0x200,
- .end = MX31_OTG_BASE_ADDR + 0x3ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_USB1,
- .end = MXC_INT_USB1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh1 = {
- .name = "mxc-ehci",
- .id = 1,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- .dma_mask = &usbh1_dmamask,
- },
- .resource = mxc_usbh1_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = ~(u32)0;
-
-static struct resource mxc_usbh2_resources[] = {
- {
- .start = MX31_OTG_BASE_ADDR + 0x400,
- .end = MX31_OTG_BASE_ADDR + 0x5ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_USB2,
- .end = MXC_INT_USB2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh2 = {
- .name = "mxc-ehci",
- .id = 2,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- .dma_mask = &usbh2_dmamask,
- },
- .resource = mxc_usbh2_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device imx_wdt_device0 = {
- .name = "imx2-wdt",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_wdt_resources),
- .resource = imx_wdt_resources,
-};
-
static struct resource imx_rtc_resources[] = {
{
.start = MX31_RTC_BASE_ADDR,
@@ -312,51 +113,3 @@
.num_resources = ARRAY_SIZE(imx_rtc_resources),
.resource = imx_rtc_resources,
};
-
-static struct resource imx_kpp_resources[] = {
- {
- .start = MX3x_KPP_BASE_ADDR,
- .end = MX3x_KPP_BASE_ADDR + 0xf,
- .flags = IORESOURCE_MEM
- }, {
- .start = MX3x_INT_KPP,
- .end = MX3x_INT_KPP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_kpp_device = {
- .name = "imx-keypad",
- .id = -1,
- .num_resources = ARRAY_SIZE(imx_kpp_resources),
- .resource = imx_kpp_resources,
-};
-
-static int __init mx3_devices_init(void)
-{
-#if defined(CONFIG_ARCH_MX31)
- if (cpu_is_mx31()) {
- imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
- imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
- mxc_register_device(&mxc_rnga_device, NULL);
- }
-#endif
-#if defined(CONFIG_ARCH_MX35)
- if (cpu_is_mx35()) {
- otg_resources[0].start = MX35_OTG_BASE_ADDR;
- otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
- otg_resources[1].start = MXC_INT_USBOTG;
- otg_resources[1].end = MXC_INT_USBOTG;
- mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
- mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
- mxc_usbh1_resources[1].start = MXC_INT_USBHS;
- mxc_usbh1_resources[1].end = MXC_INT_USBHS;
- imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
- imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
- }
-#endif
-
- return 0;
-}
-
-subsys_initcall(mx3_devices_init);
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 585f814..121962c 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,14 +1,4 @@
-extern struct platform_device mxc_w1_master_device;
extern struct platform_device mx3_ipu;
extern struct platform_device mx3_fb;
extern struct platform_device mx3_camera;
-extern struct platform_device mxcsdhc_device0;
-extern struct platform_device mxcsdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_wdt_device0;
extern struct platform_device imx_rtc_device0;
-extern struct platform_device imx_kpp_device;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 1abc10d..14a5ffc 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -111,7 +111,7 @@
.num_modes = ARRAY_SIZE(fb_modedb),
};
-static struct pad_desc eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LCD */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,
@@ -289,7 +289,7 @@
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx35_add_flexcan1(NULL);
- imx35_add_esdhc(0, NULL);
+ imx35_add_sdhci_esdhc_imx(0, NULL);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index aaa30fe..28b6f41 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -49,10 +49,8 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
-#include <mach/mmc.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -245,13 +243,13 @@
return err;
}
-static struct mxc_usbh_platform_data usbotg_pdata = {
+static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -453,7 +451,7 @@
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
}
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.get_ro = armadillo5x0_sdhc1_get_ro,
.init = armadillo5x0_sdhc1_init,
.exit = armadillo5x0_sdhc1_exit,
@@ -520,7 +518,7 @@
gpio_direction_input(MX31_PIN_GPIO1_0);
/* Register SDHC */
- mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+ imx31_add_mxc_mmc(0, &sdhc_pdata);
/* Register FB */
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
@@ -555,8 +553,8 @@
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &usbotg_pdata);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx31_add_mxc_ehci_otg(&usbotg_pdata);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
}
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 9fde873..26ae90f 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -30,7 +30,6 @@
#include <linux/i2c/tsc2007.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
@@ -43,7 +42,6 @@
#include <mach/common.h>
#include <mach/iomux-mx35.h>
#include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -74,11 +72,7 @@
},
};
-static struct platform_device *devices[] __initdata = {
- &imx_wdt_device0,
-};
-
-static struct pad_desc eukrea_cpuimx35_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
@@ -117,18 +111,18 @@
.flash_bbt = 1,
};
-static struct mxc_usbh_platform_data __maybe_unused otg_pdata = {
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
};
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
@@ -158,7 +152,7 @@
ARRAY_SIZE(eukrea_cpuimx35_pads));
imx35_add_fec(NULL);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ imx35_add_imx2_wdt(NULL);
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
@@ -168,11 +162,11 @@
imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
if (otg_mode_host)
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx35_add_mxc_ehci_otg(&otg_pdata);
else
- mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+ imx35_add_fsl_usb2_udc(&otg_device_pdata);
- mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ imx35_add_mxc_ehci_hs(&usbh1_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
eukrea_mbimxsd35_baseboard_init();
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index 042cd56..a5f3eb2 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -41,9 +41,9 @@
#include "devices-imx31.h"
#include "devices.h"
-#define KZM_ARM11_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MX31_CS4) ?: \
- IMX_IO_ADDRESS(x, MX31_CS5) ?: \
+#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \
+ IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \
+ IMX_IO_P2V_MODULE(x, MX31_CS5)) ?: \
MX31_IO_ADDRESS(x))
/*
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 0ad9e78..4e516b4 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -22,8 +22,8 @@
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
-#include <linux/fsl_devices.h>
-#include <linux/input/matrix_keypad.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -34,6 +34,7 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/3ds_debugboard.h>
+#include <mach/ulpi.h>
#include "devices-imx31.h"
#include "devices.h"
@@ -84,6 +85,21 @@
MX31_PIN_KEY_COL1_KEY_COL1,
MX31_PIN_KEY_COL2_KEY_COL2,
MX31_PIN_KEY_COL3_KEY_COL3,
+ /* USB Host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
+ /* USB Host2 reset */
+ IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
};
/*
@@ -102,7 +118,7 @@
KEY(2, 3, KEY_F10),
};
-static struct matrix_keymap_data mx31_3ds_keymap_data = {
+static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
.keymap = mx31_3ds_keymap,
.keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
};
@@ -115,6 +131,13 @@
},
};
+static struct regulator_init_data gpo_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
{
.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
@@ -122,6 +145,13 @@
}, {
.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
.init_data = &pwgtx_init,
+ }, {
+
+ .id = MC13783_REGU_GPO1, /* Turn on 1.8V */
+ .init_data = &gpo_init,
+ }, {
+ .id = MC13783_REGU_GPO3, /* Turn on 3.3V */
+ .init_data = &gpo_init,
},
};
@@ -129,7 +159,7 @@
static struct mc13783_platform_data mc13783_pdata __initdata = {
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
- .flags = MC13783_USE_REGULATOR,
+ .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
};
/* SPI */
@@ -175,6 +205,7 @@
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
+#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
static int mx31_3ds_usbotg_init(void)
{
@@ -214,11 +245,77 @@
return err;
}
-static struct fsl_usb2_platform_data usbotg_pdata = {
+static int mx31_3ds_host2_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
+
+ err = gpio_request(USBH2_RST_B, "usbh2-reset");
+ if (err) {
+ pr_err("Failed to request the USB Host 2 reset gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(USBH2_RST_B, 0);
+ if (err) {
+ pr_err("Failed to drive the USB Host 2 reset gpio\n");
+ goto usbotg_free_reset;
+ }
+
+ mdelay(1);
+ gpio_set_value(USBH2_RST_B, 1);
+ return 0;
+
+usbotg_free_reset:
+ gpio_free(USBH2_RST_B);
+ return err;
+}
+
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+ .init = mx31_3ds_host2_init,
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+#endif
+
+static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
+static int otg_mode_host;
+
+static int __init mx31_3ds_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", mx31_3ds_otg_mode);
+
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -246,14 +343,27 @@
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
- mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
+ imx31_add_imx_keypad(&mx31_3ds_keymap_data);
mx31_3ds_usbotg_init();
- mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+ imx31_add_mxc_ehci_otg(&otg_pdata);
+ }
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+#endif
+ if (!otg_mode_host)
+ imx31_add_fsl_usb2_udc(&usbotg_pdata);
if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
printk(KERN_WARNING "Init of the debug board failed, all "
"devices on the debug board are unusable.\n");
+ imx31_add_imx2_wdt(NULL);
}
static void __init mx31_3ds_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 42f47fa..2c59548 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -42,7 +42,6 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -230,13 +229,13 @@
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.init = usbh1_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
@@ -249,8 +248,8 @@
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh1, &usbh1_pdata);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
}
#else
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index b938958..9e64c66 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -40,7 +40,6 @@
#include <mach/board-mx31lite.h>
#include <mach/iomux-mx3.h>
#include <mach/irqs.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -171,7 +170,7 @@
return 0;
}
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
@@ -258,7 +257,7 @@
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
/* SMSC9117 IRQ pin */
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index eb5f426..203d21a 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -40,8 +40,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
#include <mach/mx3_camera.h>
#include <mach/spi.h>
#include <mach/ulpi.h>
@@ -170,11 +168,11 @@
static struct regulator_consumer_supply sdhc_consumers[] = {
{
- .dev = &mxcsdhc_device0.dev,
+ .dev_name = "mxc-mmc.0",
.supply = "sdhc0_vcc",
},
{
- .dev = &mxcsdhc_device1.dev,
+ .dev_name = "mxc-mmc.1",
.supply = "sdhc1_vcc",
},
};
@@ -345,7 +343,7 @@
gpio_free(SDHC1_CD);
}
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
.get_ro = moboard_sdhc1_get_ro,
.init = moboard_sdhc1_init,
.exit = moboard_sdhc1_exit,
@@ -404,17 +402,23 @@
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init moboard_usbh2_init(void)
{
+ struct platform_device *pdev;
+
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
}
#else
static inline int moboard_usbh2_init(void) { return 0; }
@@ -520,7 +524,7 @@
spi_register_board_info(moboard_spi_board_info,
ARRAY_SIZE(moboard_spi_board_info));
- mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+ imx31_add_mxc_mmc(0, &sdhc1_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index b66a75a..b1963f2 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -26,7 +26,7 @@
#include <linux/platform_device.h>
#include <linux/memory.h>
#include <linux/gpio.h>
-#include <linux/fsl_devices.h>
+#include <linux/usb/otg.h>
#include <linux/mtd/physmap.h>
@@ -40,7 +40,6 @@
#include <mach/iomux-mx35.h>
#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
-#include <mach/mxc_ehci.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -81,7 +80,7 @@
&mx35pdk_flash,
};
-static struct pad_desc mx35pdk_pads[] = {
+static iomux_v3_cfg_t mx35pdk_pads[] = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
@@ -122,18 +121,38 @@
};
/* OTG config */
-static struct fsl_usb2_platform_data usb_otg_pdata = {
+static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .portsc = MXC_EHCI_MODE_UTMI,
+ .flags = MXC_EHCI_INTERNAL_PHY,
+};
+
/* USB HOST config */
-static struct mxc_usbh_platform_data usb_host_pdata = {
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY,
};
+static int otg_mode_host;
+
+static int __init mx35_3ds_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", mx35_3ds_otg_mode);
+
/*
* Board specific initialization.
*/
@@ -142,16 +161,21 @@
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
imx35_add_fec(NULL);
+ imx35_add_imx2_wdt(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx35_add_imx_uart0(&uart_pdata);
- mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata);
+ if (otg_mode_host)
+ imx35_add_mxc_ehci_otg(&otg_pdata);
- mxc_register_device(&mxc_usbh1, &usb_host_pdata);
+ imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+ if (!otg_mode_host)
+ imx35_add_fsl_usb2_udc(&usb_otg_pdata);
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
- imx35_add_esdhc(0, NULL);
+ imx35_add_sdhci_esdhc_imx(0, NULL);
if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
pr_warn("Init of the debugboard failed, all "
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 2ff3f66..b752f6b 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -27,7 +27,6 @@
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/irq.h>
-#include <linux/fsl_devices.h>
#include <linux/can/platform/sja1000.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -43,10 +42,8 @@
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
-#include <mach/mmc.h>
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -399,7 +396,7 @@
gpio_free(SDHC1_GPIO_WP);
}
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
#ifdef PCM970_SDHC_RW_SWITCH
.get_ro = pcm970_sdhc1_get_ro,
#endif
@@ -441,7 +438,6 @@
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
- &imx_wdt_device0,
&pcm037_mt9t031,
&pcm037_mt9v022,
};
@@ -538,18 +534,18 @@
};
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
@@ -607,12 +603,13 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
+ imx31_add_imx2_wdt(NULL);
imx31_add_imx_uart0(&uart_pdata);
/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
imx31_add_imx_uart1(&uart_pdata);
imx31_add_imx_uart2(&uart_pdata);
- mxc_register_device(&mxc_w1_master_device, NULL);
+ imx31_add_mxc_w1(NULL);
/* LAN9217 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
@@ -632,7 +629,7 @@
imx31_add_imx_i2c2(&pcm037_i2c2_data);
imx31_add_mxc_nand(&pcm037_nand_board_info);
- mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+ imx31_add_mxc_mmc(0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
@@ -654,16 +651,16 @@
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx31_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
if (!otg_mode_host)
- mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+ imx31_add_fsl_usb2_udc(&otg_device_pdata);
}
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 4e1de87..bcf83fc 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -27,7 +27,6 @@
#include <linux/i2c/at24.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,7 +38,6 @@
#include <mach/iomux-mx35.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <mach/audmux.h>
@@ -140,10 +138,9 @@
static struct platform_device *devices[] __initdata = {
&pcm043_flash,
- &imx_wdt_device0,
};
-static struct pad_desc pcm043_pads[] = {
+static iomux_v3_cfg_t pcm043_pads[] = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
@@ -230,8 +227,8 @@
static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
{
- struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
- struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+ iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+ iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
int ret;
ret = gpio_request(AC97_GPIO_TXFS, "SSI");
@@ -240,7 +237,7 @@
return;
}
- mxc_iomux_v3_setup_pad(&txfs_gpio);
+ mxc_iomux_v3_setup_pad(txfs_gpio);
/* warm reset */
gpio_direction_output(AC97_GPIO_TXFS, 1);
@@ -248,16 +245,16 @@
gpio_set_value(AC97_GPIO_TXFS, 0);
gpio_free(AC97_GPIO_TXFS);
- mxc_iomux_v3_setup_pad(&txfs);
+ mxc_iomux_v3_setup_pad(txfs);
}
static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
{
- struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
- struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
- struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
- struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
- struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+ iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+ iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+ iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+ iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+ iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
int ret;
ret = gpio_request(AC97_GPIO_TXFS, "SSI");
@@ -272,9 +269,9 @@
if (ret)
goto err3;
- mxc_iomux_v3_setup_pad(&txfs_gpio);
- mxc_iomux_v3_setup_pad(&txd_gpio);
- mxc_iomux_v3_setup_pad(&reset_gpio);
+ mxc_iomux_v3_setup_pad(txfs_gpio);
+ mxc_iomux_v3_setup_pad(txd_gpio);
+ mxc_iomux_v3_setup_pad(reset_gpio);
gpio_direction_output(AC97_GPIO_TXFS, 0);
gpio_direction_output(AC97_GPIO_TXD, 0);
@@ -284,8 +281,8 @@
udelay(10);
gpio_direction_output(AC97_GPIO_RESET, 1);
- mxc_iomux_v3_setup_pad(&txd);
- mxc_iomux_v3_setup_pad(&txfs);
+ mxc_iomux_v3_setup_pad(txd);
+ mxc_iomux_v3_setup_pad(txfs);
gpio_free(AC97_GPIO_RESET);
err3:
@@ -311,19 +308,19 @@
};
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
};
#endif
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
};
@@ -364,6 +361,7 @@
imx35_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
+ imx35_add_imx2_wdt(NULL);
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&pcm037_nand_board_info);
@@ -386,16 +384,16 @@
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx35_add_mxc_ehci_otg(&otg_pdata);
}
- mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ imx35_add_mxc_ehci_hs(&usbh1_pdata);
#endif
if (!otg_mode_host)
- mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+ imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_flexcan1(NULL);
- imx35_add_esdhc(0, NULL);
+ imx35_add_sdhci_esdhc_imx(0, NULL);
}
static void __init pcm043_timer_init(void)
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index b4ffc53..47118f7 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -36,40 +36,16 @@
* @ingroup Memory
*/
-/*!
- * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX3 boards.
- */
-static struct map_desc mxc_io_desc[] __initdata = {
- {
- .virtual = X_MEMC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
- .length = X_MEMC_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = AVIC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AVIC_BASE_ADDR),
- .length = AVIC_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
- .length = SPBA0_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
+#ifdef CONFIG_SOC_IMX31
+static struct map_desc mx31_io_desc[] __initdata = {
+ imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
};
-/*!
+/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
@@ -77,34 +53,44 @@
void __init mx31_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
- mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+ mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+ iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
}
-#ifdef CONFIG_ARCH_MX35
+int imx31_register_gpios(void);
+void __init mx31_init_irq(void)
+{
+ mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+ imx31_register_gpios();
+}
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+ imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+ mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-#endif
-
-int imx3x_register_gpios(void);
-
-void __init mx31_init_irq(void)
-{
- mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
- imx3x_register_gpios();
+ iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
+int imx35_register_gpios(void);
void __init mx35_init_irq(void)
{
- mx31_init_irq();
+ mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+ imx35_register_gpios();
}
+#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_CACHE_L2X0
static int mxc_init_l2x0(void)
@@ -129,7 +115,7 @@
pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
}
- l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
+ l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
if (IS_ERR(l2x0_base)) {
printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
PTR_ERR(l2x0_base));
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 827fd3c..8f1a38e 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -34,7 +34,6 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
-#include <mach/mmc.h>
#include <mach/mx3fb.h>
#include <mach/ipu.h>
@@ -158,7 +157,7 @@
free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
}
-static struct imxmmc_platform_data mmc_pdata = {
+static const struct imxmmc_platform_data mmc_pdata __initconst = {
.get_ro = mxc_mmc1_get_ro,
.init = mxc_mmc1_init,
.exit = mxc_mmc1_exit,
@@ -216,7 +215,7 @@
imx31_add_imx_uart0(&uart_pdata);
imx31_add_imx_uart1(&uart_pdata);
imx31_add_imx_uart2(&uart_pdata);
- mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+ imx31_add_mxc_mmc(0, &mmc_pdata);
mx31lilly_init_fb();
}
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 7b0e74e..3124ea8 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -35,7 +35,6 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lite.h>
-#include <mach/mmc.h>
#include "devices-imx31.h"
#include "devices.h"
@@ -142,7 +141,7 @@
free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
}
-static struct imxmmc_platform_data mmc_pdata = {
+static const struct imxmmc_platform_data mmc_pdata __initconst = {
.get_ro = mxc_mmc1_get_ro,
.init = mxc_mmc1_init,
.exit = mxc_mmc1_exit,
@@ -197,10 +196,9 @@
ARRAY_SIZE(litekit_db_board_pins),
"development board pins");
imx31_add_imx_uart0(&uart_pdata);
- mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+ imx31_add_mxc_mmc(0, &mmc_pdata);
imx31_add_spi_imx0(&spi0_pdata);
platform_device_register(&litekit_led_device);
- mxc_register_device(&imx_wdt_device0, NULL);
+ imx31_add_imx2_wdt(NULL);
mxc_register_device(&imx_rtc_device0, NULL);
}
-
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index fc395a7..94a0b9e 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -18,15 +18,12 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
-#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -103,7 +100,7 @@
gpio_free(SDHC2_CD);
}
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
.get_ro = devboard_sdhc2_get_ro,
.init = devboard_sdhc2_init,
.exit = devboard_sdhc2_exit,
@@ -187,7 +184,7 @@
return 0;
}
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = devboard_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
@@ -196,6 +193,7 @@
static int __init devboard_usbh1_init(void)
{
struct otg_transceiver *otg;
+ struct platform_device *pdev;
otg = kzalloc(sizeof(*otg), GFP_KERNEL);
if (!otg)
@@ -207,11 +205,15 @@
usbh1_pdata.otg = otg;
- return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
}
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
@@ -228,11 +230,11 @@
imx31_add_imx_uart1(&uart_pdata);
- mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+ imx31_add_mxc_mmc(1, &sdhc2_pdata);
devboard_init_sel_gpios();
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+ imx31_add_fsl_usb2_udc(&usb_pdata);
devboard_usbh1_init();
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 18069cb..f449a97 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -21,7 +21,6 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/types.h>
-#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
@@ -29,12 +28,11 @@
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <media/soc_camera.h>
+#include "devices-imx31.h"
#include "devices.h"
static unsigned int marxbot_pins[] = {
@@ -116,7 +114,7 @@
gpio_free(SDHC2_CD);
}
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
.get_ro = marxbot_sdhc2_get_ro,
.init = marxbot_sdhc2_init,
.exit = marxbot_sdhc2_exit,
@@ -302,7 +300,7 @@
return 0;
}
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = marxbot_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
@@ -311,6 +309,7 @@
static int __init marxbot_usbh1_init(void)
{
struct otg_transceiver *otg;
+ struct platform_device *pdev;
otg = kzalloc(sizeof(*otg), GFP_KERNEL);
if (!otg)
@@ -322,10 +321,14 @@
usbh1_pdata.otg = otg;
- return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
}
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
@@ -344,7 +347,7 @@
dspics_resets_init();
- mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+ imx31_add_mxc_mmc(1, &sdhc2_pdata);
spi_register_board_info(marxbot_spi_board_info,
ARRAY_SIZE(marxbot_spi_board_info));
@@ -357,7 +360,7 @@
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+ imx31_add_fsl_usb2_udc(&usb_pdata);
marxbot_usbh1_init();
}
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 04760a5..bbec3c8 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/types.h>
-#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -28,7 +27,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31moboard.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <media/soc_camera.h>
@@ -118,24 +116,30 @@
return 0;
}
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_host_pdata = {
+static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init smartbot_otg_host_init(void)
{
+ struct platform_device *pdev;
+
otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
+ pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
}
#else
static inline int smartbot_otg_host_init(void) { return 0; }
@@ -182,7 +186,7 @@
switch (board) {
case MX31SMARTBOT:
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+ imx31_add_fsl_usb2_udc(&usb_pdata);
break;
case MX31EYEBOT:
smartbot_otg_host_init();
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 3ec910a..55254b6 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,20 +1,47 @@
if ARCH_MX5
+# ARCH_MX51 and ARCH_MX50 are left for compatibility
+
+config ARCH_MX50
+ bool
config ARCH_MX51
bool
- default y
+
+config ARCH_MX53
+ bool
+
+config SOC_IMX50
+ bool
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
+ select ARCH_MX50
+
+config SOC_IMX51
+ bool
+ select MXC_TZIC
+ select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
+ select ARCH_HAS_CPUFREQ
+ select ARCH_MX51
+
+config SOC_IMX53
+ bool
+ select MXC_TZIC
+ select ARCH_MXC_IOMUX_V3
+ select ARCH_MX53
comment "MX5 platforms:"
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_ESDHC
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
@@ -22,7 +49,9 @@
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
+ select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
help
@@ -31,6 +60,7 @@
config MACH_EUKREA_CPUIMX51
bool "Support Eukrea CPUIMX51 module"
+ select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
@@ -47,7 +77,7 @@
config MACH_EUKREA_MBIMX51_BASEBOARD
prompt "Eukrea MBIMX51 development board"
bool
- select IMX_HAVE_PLATFORM_ESDHC
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
This adds board specific devices that can be found on Eukrea's
MBIMX51 evaluation board.
@@ -56,6 +86,7 @@
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
+ select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_SPI_IMX
select IMX_HAVE_PLATFORM_IMX_UART
@@ -72,7 +103,7 @@
config MACH_EUKREA_MBIMXSD51_BASEBOARD
prompt "Eukrea MBIMXSD development board"
bool
- select IMX_HAVE_PLATFORM_ESDHC
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
@@ -81,9 +112,33 @@
config MACH_MX51_EFIKAMX
bool "Support MX51 Genesi Efika MX nettop"
+ select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Genesi Efika MX nettop. This includes specific
configurations for the board and its peripherals.
+config MACH_MX53_EVK
+ bool "Support MX53 EVK platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for MX53 EVK platform. This includes specific
+ configurations for the board and its peripherals.
+
+
+config MACH_MX50_RDP
+ bool "Support MX50 reference design platform"
+ depends on BROKEN
+ select SOC_IMX50
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX50 reference design platform (RDP) board. This
+ includes specific configurations for the board and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 462f177..0c398ba 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,13 +3,16 @@
#
# Object file lists.
-obj-y := cpu.o mm.o clock-mx51.o devices.o
+obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o
+obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
+obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
index 9939a19..e928be1 100644
--- a/arch/arm/mach-mx5/Makefile.boot
+++ b/arch/arm/mach-mx5/Makefile.boot
@@ -1,3 +1,9 @@
- zreladdr-y := 0x90008000
-params_phys-y := 0x90000100
-initrd_phys-y := 0x90800000
+ zreladdr-$(CONFIG_ARCH_MX50) := 0x70008000
+params_phys-$(CONFIG_ARCH_MX50) := 0x70000100
+initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000
+ zreladdr-$(CONFIG_ARCH_MX51) := 0x90008000
+params_phys-$(CONFIG_ARCH_MX51) := 0x90000100
+initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000
+ zreladdr-$(CONFIG_ARCH_MX53) := 0x70008000
+params_phys-$(CONFIG_ARCH_MX53) := 0x70000100
+initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 6a9792f..f8652ef 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -40,11 +40,11 @@
#include "devices-imx51.h"
#include "devices.h"
-#define CPUIMX51_USBH1_STP (0*32 + 27)
-#define CPUIMX51_QUARTA_GPIO (2*32 + 28)
-#define CPUIMX51_QUARTB_GPIO (2*32 + 25)
-#define CPUIMX51_QUARTC_GPIO (2*32 + 26)
-#define CPUIMX51_QUARTD_GPIO (2*32 + 27)
+#define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27)
+#define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28)
+#define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25)
+#define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26)
+#define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27)
#define CPUIMX51_QUARTA_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
#define CPUIMX51_QUARTB_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
#define CPUIMX51_QUARTC_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
@@ -113,7 +113,7 @@
#endif
};
-static struct pad_desc eukrea_cpuimx51_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
@@ -121,15 +121,15 @@
MX51_PAD_UART1_CTS__UART1_CTS,
/* I2C2 */
- MX51_PAD_GPIO_1_2__I2C2_SCL,
- MX51_PAD_GPIO_1_3__I2C2_SDA,
- MX51_PAD_NANDF_D10__GPIO_3_30,
+ MX51_PAD_GPIO1_2__I2C2_SCL,
+ MX51_PAD_GPIO1_3__I2C2_SDA,
+ MX51_PAD_NANDF_D10__GPIO3_30,
/* QUART IRQ */
- MX51_PAD_NANDF_D15__GPIO_3_25,
- MX51_PAD_NANDF_D14__GPIO_3_26,
- MX51_PAD_NANDF_D13__GPIO_3_27,
- MX51_PAD_NANDF_D12__GPIO_3_28,
+ MX51_PAD_NANDF_D15__GPIO3_25,
+ MX51_PAD_NANDF_D14__GPIO3_26,
+ MX51_PAD_NANDF_D13__GPIO3_27,
+ MX51_PAD_NANDF_D12__GPIO3_28,
/* USB HOST1 */
MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -178,6 +178,8 @@
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
/* Set the PHY clock to 19.2MHz */
@@ -196,6 +198,8 @@
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
/* The clock for the USBH1 ULPI port will come externally from the PHY. */
@@ -292,7 +296,7 @@
MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MX51_PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
.init_machine = eukrea_cpuimx51_init,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 4b3a611..ad93189 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -43,19 +43,19 @@
#include "devices-imx51.h"
#include "devices.h"
-#define USBH1_RST (1*32 + 28)
-#define ETH_RST (1*32 + 31)
-#define TSC2007_IRQGPIO (2*32 + 12)
-#define CAN_IRQGPIO (0*32 + 1)
-#define CAN_RST (3*32 + 15)
-#define CAN_NCS (3*32 + 24)
-#define CAN_RXOBF (0*32 + 4)
-#define CAN_RX1BF (0*32 + 6)
-#define CAN_TXORTS (0*32 + 7)
-#define CAN_TX1RTS (0*32 + 8)
-#define CAN_TX2RTS (0*32 + 9)
-#define I2C_SCL (3*32 + 16)
-#define I2C_SDA (3*32 + 17)
+#define USBH1_RST IMX_GPIO_NR(2, 28)
+#define ETH_RST IMX_GPIO_NR(2, 31)
+#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 12)
+#define CAN_IRQGPIO IMX_GPIO_NR(1, 1)
+#define CAN_RST IMX_GPIO_NR(4, 15)
+#define CAN_NCS IMX_GPIO_NR(4, 24)
+#define CAN_RXOBF IMX_GPIO_NR(1, 4)
+#define CAN_RX1BF IMX_GPIO_NR(1, 6)
+#define CAN_TXORTS IMX_GPIO_NR(1, 7)
+#define CAN_TX1RTS IMX_GPIO_NR(1, 8)
+#define CAN_TX2RTS IMX_GPIO_NR(1, 9)
+#define I2C_SCL IMX_GPIO_NR(4, 16)
+#define I2C_SDA IMX_GPIO_NR(4, 17)
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
@@ -65,10 +65,7 @@
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02
-#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \
- MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-
-static struct pad_desc eukrea_cpuimx51sd_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
@@ -88,30 +85,33 @@
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
MX51_PAD_USBH1_STP__USBH1_STP,
- MX51_PAD_EIM_CS3__GPIO_2_28, /* PHY nRESET */
+ MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */
/* FEC */
- MX51_PAD_EIM_DTACK__GPIO_2_31, /* PHY nRESET */
+ MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */
/* HSI2C */
- MX51_PAD_I2C1_CLK__GPIO_4_16,
- MX51_PAD_I2C1_DAT__GPIO_4_17,
+ MX51_PAD_I2C1_CLK__GPIO4_16,
+ MX51_PAD_I2C1_DAT__GPIO4_17,
/* CAN */
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO_4_24, /* nCS */
- MX51_PAD_CSI2_PIXCLK__GPIO_4_15, /* nReset */
- MX51_PAD_GPIO_1_1__GPIO_1_1, /* IRQ */
- MX51_PAD_GPIO_1_4__GPIO_1_4, /* Control signals */
- MX51_PAD_GPIO_1_6__GPIO_1_6,
- MX51_PAD_GPIO_1_7__GPIO_1_7,
- MX51_PAD_GPIO_1_8__GPIO_1_8,
- MX51_PAD_GPIO_1_9__GPIO_1_9,
+ MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */
+ MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */
+ MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */
+ MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */
+ MX51_PAD_GPIO1_6__GPIO1_6,
+ MX51_PAD_GPIO1_7__GPIO1_7,
+ MX51_PAD_GPIO1_8__GPIO1_8,
+ MX51_PAD_GPIO1_9__GPIO1_9,
/* Touchscreen */
- CPUIMX51SD_GPIO_3_12, /* IRQ */
+ /* IRQ */
+ _MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -157,6 +157,8 @@
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
/* Set the PHY clock to 19.2MHz */
@@ -175,6 +177,8 @@
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
/* The clock for the USBH1 ULPI port will come from the PHY. */
@@ -243,7 +247,7 @@
.mode = SPI_MODE_0,
.chip_select = 0,
.platform_data = &mcp251x_info,
- .irq = gpio_to_irq(0 * 32 + 1)
+ .irq = gpio_to_irq(CAN_IRQGPIO)
},
};
@@ -323,7 +327,7 @@
MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MX51_PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
.init_machine = eukrea_cpuimx51sd_init,
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
new file mode 100644
index 0000000..fd32e4c
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx50.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-mx50.h"
+
+static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
+ /* SD1 */
+ MX50_PAD_ECSPI2_SS0__GPIO_4_19,
+ MX50_PAD_EIM_CRE__GPIO_1_27,
+ MX50_PAD_SD1_CMD__SD1_CMD,
+
+ MX50_PAD_SD1_CLK__SD1_CLK,
+ MX50_PAD_SD1_D0__SD1_D0,
+ MX50_PAD_SD1_D1__SD1_D1,
+ MX50_PAD_SD1_D2__SD1_D2,
+ MX50_PAD_SD1_D3__SD1_D3,
+
+ /* SD2 */
+ MX50_PAD_SD2_CD__GPIO_5_17,
+ MX50_PAD_SD2_WP__GPIO_5_16,
+ MX50_PAD_SD2_CMD__SD2_CMD,
+ MX50_PAD_SD2_CLK__SD2_CLK,
+ MX50_PAD_SD2_D0__SD2_D0,
+ MX50_PAD_SD2_D1__SD2_D1,
+ MX50_PAD_SD2_D2__SD2_D2,
+ MX50_PAD_SD2_D3__SD2_D3,
+ MX50_PAD_SD2_D4__SD2_D4,
+ MX50_PAD_SD2_D5__SD2_D5,
+ MX50_PAD_SD2_D6__SD2_D6,
+ MX50_PAD_SD2_D7__SD2_D7,
+
+ /* SD3 */
+ MX50_PAD_SD3_CMD__SD3_CMD,
+ MX50_PAD_SD3_CLK__SD3_CLK,
+ MX50_PAD_SD3_D0__SD3_D0,
+ MX50_PAD_SD3_D1__SD3_D1,
+ MX50_PAD_SD3_D2__SD3_D2,
+ MX50_PAD_SD3_D3__SD3_D3,
+ MX50_PAD_SD3_D4__SD3_D4,
+ MX50_PAD_SD3_D5__SD3_D5,
+ MX50_PAD_SD3_D6__SD3_D6,
+ MX50_PAD_SD3_D7__SD3_D7,
+
+ /* PWR_INT */
+ MX50_PAD_ECSPI2_MISO__GPIO_4_18,
+
+ /* UART pad setting */
+ MX50_PAD_UART1_TXD__UART1_TXD,
+ MX50_PAD_UART1_RXD__UART1_RXD,
+ MX50_PAD_UART1_RTS__UART1_RTS,
+ MX50_PAD_UART2_TXD__UART2_TXD,
+ MX50_PAD_UART2_RXD__UART2_RXD,
+ MX50_PAD_UART2_CTS__UART2_CTS,
+ MX50_PAD_UART2_RTS__UART2_RTS,
+
+ MX50_PAD_I2C1_SCL__I2C1_SCL,
+ MX50_PAD_I2C1_SDA__I2C1_SDA,
+ MX50_PAD_I2C2_SCL__I2C2_SCL,
+ MX50_PAD_I2C2_SDA__I2C2_SDA,
+
+ MX50_PAD_EPITO__USBH1_PWR,
+ /* Need to comment below line if
+ * one needs to debug owire.
+ */
+ MX50_PAD_OWIRE__USBH1_OC,
+ /* using gpio to control otg pwr */
+ MX50_PAD_PWM2__GPIO_6_25,
+ MX50_PAD_I2C3_SCL__USBOTG_OC,
+
+ MX50_PAD_SSI_RXC__FEC_MDIO,
+ MX50_PAD_SSI_RXC__FEC_MDIO,
+ MX50_PAD_DISP_D0__FEC_TXCLK,
+ MX50_PAD_DISP_D1__FEC_RX_ER,
+ MX50_PAD_DISP_D2__FEC_RX_DV,
+ MX50_PAD_DISP_D3__FEC_RXD1,
+ MX50_PAD_DISP_D4__FEC_RXD0,
+ MX50_PAD_DISP_D5__FEC_TX_EN,
+ MX50_PAD_DISP_D6__FEC_TXD1,
+ MX50_PAD_DISP_D7__FEC_TXD0,
+ MX50_PAD_SSI_RXFS__FEC_MDC,
+ MX50_PAD_I2C3_SDA__GPIO_6_23,
+ MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
+
+ MX50_PAD_CSPI_SS0__CSPI_SS0,
+ MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
+ MX50_PAD_CSPI_MOSI__CSPI_MOSI,
+ MX50_PAD_CSPI_MISO__CSPI_MISO,
+
+ /* SGTL500_OSC_EN */
+ MX50_PAD_UART1_CTS__GPIO_6_8,
+
+ /* SGTL_AMP_SHDN */
+ MX50_PAD_UART3_RXD__GPIO_6_15,
+
+ /* Keypad */
+ MX50_PAD_KEY_COL0__KEY_COL0,
+ MX50_PAD_KEY_ROW0__KEY_ROW0,
+ MX50_PAD_KEY_COL1__KEY_COL1,
+ MX50_PAD_KEY_ROW1__KEY_ROW1,
+ MX50_PAD_KEY_COL2__KEY_COL2,
+ MX50_PAD_KEY_ROW2__KEY_ROW2,
+ MX50_PAD_KEY_COL3__KEY_COL3,
+ MX50_PAD_KEY_ROW3__KEY_ROW3,
+ MX50_PAD_EIM_DA0__KEY_COL4,
+ MX50_PAD_EIM_DA1__KEY_ROW4,
+ MX50_PAD_EIM_DA2__KEY_COL5,
+ MX50_PAD_EIM_DA3__KEY_ROW5,
+ MX50_PAD_EIM_DA4__KEY_COL6,
+ MX50_PAD_EIM_DA5__KEY_ROW6,
+ MX50_PAD_EIM_DA6__KEY_COL7,
+ MX50_PAD_EIM_DA7__KEY_ROW7,
+ /*EIM pads */
+ MX50_PAD_EIM_DA8__GPIO_1_8,
+ MX50_PAD_EIM_DA9__GPIO_1_9,
+ MX50_PAD_EIM_DA10__GPIO_1_10,
+ MX50_PAD_EIM_DA11__GPIO_1_11,
+ MX50_PAD_EIM_DA12__GPIO_1_12,
+ MX50_PAD_EIM_DA13__GPIO_1_13,
+ MX50_PAD_EIM_DA14__GPIO_1_14,
+ MX50_PAD_EIM_DA15__GPIO_1_15,
+ MX50_PAD_EIM_CS2__GPIO_1_16,
+ MX50_PAD_EIM_CS1__GPIO_1_17,
+ MX50_PAD_EIM_CS0__GPIO_1_18,
+ MX50_PAD_EIM_EB0__GPIO_1_19,
+ MX50_PAD_EIM_EB1__GPIO_1_20,
+ MX50_PAD_EIM_WAIT__GPIO_1_21,
+ MX50_PAD_EIM_BCLK__GPIO_1_22,
+ MX50_PAD_EIM_RDY__GPIO_1_23,
+ MX50_PAD_EIM_OE__GPIO_1_24,
+};
+
+/* Serial ports */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mx50_rdp_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
+ ARRAY_SIZE(mx50_rdp_pads));
+
+ imx50_add_imx_uart(0, &uart_pdata);
+ imx50_add_imx_uart(1, &uart_pdata);
+}
+
+static void __init mx50_rdp_timer_init(void)
+{
+ mx50_clocks_init(32768, 24000000, 22579200);
+}
+
+static struct sys_timer mx50_rdp_timer = {
+ .init = mx50_rdp_timer_init,
+};
+
+MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
+ .map_io = mx50_map_io,
+ .init_irq = mx50_init_irq,
+ .init_machine = mx50_rdp_board_init,
+ .timer = &mx50_rdp_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 79ce8dc..e42bd2e 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -30,7 +30,7 @@
#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
-static struct pad_desc mx51_3ds_pads[] = {
+static iomux_v3_cfg_t mx51_3ds_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
@@ -50,7 +50,7 @@
MX51_PAD_EIM_D27__UART3_RTS,
/* CPLD PARENT IRQ PIN */
- MX51_PAD_GPIO_1_6__GPIO_1_6,
+ MX51_PAD_GPIO1_6__GPIO1_6,
/* KPP */
MX51_PAD_KEY_ROW0__KEY_ROW0,
@@ -68,7 +68,7 @@
MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
MX51_PAD_NANDF_RB3__ECSPI2_MISO,
MX51_PAD_NANDF_D15__ECSPI2_MOSI,
- MX51_PAD_NANDF_D12__GPIO_3_28,
+ MX51_PAD_NANDF_D12__GPIO3_28,
};
/* Serial ports */
@@ -172,6 +172,7 @@
printk(KERN_WARNING "Init of the debugboard failed, all "
"devices on the board are unusable.\n");
+ imx51_add_sdhci_esdhc_imx(0, NULL);
mxc_init_keypad();
}
@@ -186,7 +187,7 @@
MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MX51_PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index acbe30d..1d231e8 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -20,6 +20,8 @@
#include <linux/fec.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -36,11 +38,13 @@
#include "devices.h"
#include "cpu_op-mx51.h"
-#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */
-#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
-#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */
-#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */
-#define BABBAGE_POWER_KEY (1*32 + 21) /* GPIO_2_21 */
+#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
+#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27)
+#define BABBAGE_PHY_RESET IMX_GPIO_NR(2, 5)
+#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14)
+#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21)
+#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
+#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25)
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
@@ -65,7 +69,7 @@
.nbuttons = ARRAY_SIZE(babbage_buttons),
};
-static struct pad_desc mx51babbage_pads[] = {
+static iomux_v3_cfg_t mx51babbage_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
@@ -91,8 +95,8 @@
MX51_PAD_KEY_COL5__I2C2_SDA,
/* HSI2C */
- MX51_PAD_I2C1_CLK__HSI2C_CLK,
- MX51_PAD_I2C1_DAT__HSI2C_DAT,
+ MX51_PAD_I2C1_CLK__I2C1_CLK,
+ MX51_PAD_I2C1_DAT__I2C1_DAT,
/* USB HOST1 */
MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -108,29 +112,29 @@
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
/* USB HUB reset line*/
- MX51_PAD_GPIO_1_7__GPIO_1_7,
+ MX51_PAD_GPIO1_7__GPIO1_7,
/* FEC */
MX51_PAD_EIM_EB2__FEC_MDIO,
- MX51_PAD_EIM_EB3__FEC_RDAT1,
- MX51_PAD_EIM_CS2__FEC_RDAT2,
- MX51_PAD_EIM_CS3__FEC_RDAT3,
+ MX51_PAD_EIM_EB3__FEC_RDATA1,
+ MX51_PAD_EIM_CS2__FEC_RDATA2,
+ MX51_PAD_EIM_CS3__FEC_RDATA3,
MX51_PAD_EIM_CS4__FEC_RX_ER,
MX51_PAD_EIM_CS5__FEC_CRS,
MX51_PAD_NANDF_RB2__FEC_COL,
- MX51_PAD_NANDF_RB3__FEC_RXCLK,
- MX51_PAD_NANDF_RB6__FEC_RDAT0,
- MX51_PAD_NANDF_RB7__FEC_TDAT0,
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK,
+ MX51_PAD_NANDF_D9__FEC_RDATA0,
+ MX51_PAD_NANDF_D8__FEC_TDATA0,
MX51_PAD_NANDF_CS2__FEC_TX_ER,
MX51_PAD_NANDF_CS3__FEC_MDC,
- MX51_PAD_NANDF_CS4__FEC_TDAT1,
- MX51_PAD_NANDF_CS5__FEC_TDAT2,
- MX51_PAD_NANDF_CS6__FEC_TDAT3,
+ MX51_PAD_NANDF_CS4__FEC_TDATA1,
+ MX51_PAD_NANDF_CS5__FEC_TDATA2,
+ MX51_PAD_NANDF_CS6__FEC_TDATA3,
MX51_PAD_NANDF_CS7__FEC_TX_EN,
MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
/* FEC PHY reset line */
- MX51_PAD_EIM_A20__GPIO_2_14,
+ MX51_PAD_EIM_A20__GPIO2_14,
/* SD 1 */
MX51_PAD_SD1_CMD__SD1_CMD,
@@ -147,6 +151,13 @@
MX51_PAD_SD2_DATA1__SD2_DATA1,
MX51_PAD_SD2_DATA2__SD2_DATA2,
MX51_PAD_SD2_DATA3__SD2_DATA3,
+
+ /* eCSPI1 */
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+ MX51_PAD_CSPI1_SS0__GPIO4_24,
+ MX51_PAD_CSPI1_SS1__GPIO4_25,
};
/* Serial ports */
@@ -177,12 +188,12 @@
static int gpio_usbh1_active(void)
{
- struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
- struct pad_desc phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
+ iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
+ iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
int ret;
/* Set USBH1_STP to GPIO and toggle it */
- mxc_iomux_v3_setup_pad(&usbh1stp_gpio);
+ mxc_iomux_v3_setup_pad(usbh1stp_gpio);
ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
if (ret) {
@@ -195,7 +206,7 @@
gpio_free(BABBAGE_USBH1_STP);
/* De-assert USB PHY RESETB */
- mxc_iomux_v3_setup_pad(&phyreset_gpio);
+ mxc_iomux_v3_setup_pad(phyreset_gpio);
ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
if (ret) {
@@ -251,6 +262,8 @@
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
/* Set the PHY clock to 19.2MHz */
@@ -269,6 +282,8 @@
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
/* The clock for the USBH1 ULPI port will come externally from the PHY. */
@@ -310,13 +325,35 @@
}
__setup("otg_mode=", babbage_otg_mode);
+static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
+ {
+ .modalias = "mtd_dataflash",
+ .max_speed_hz = 25000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_0,
+ .platform_data = NULL,
+ },
+};
+
+static int mx51_babbage_spi_cs[] = {
+ BABBAGE_ECSPI1_CS0,
+ BABBAGE_ECSPI1_CS1,
+};
+
+static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
+ .chipselect = mx51_babbage_spi_cs,
+ .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
+};
+
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
- struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21;
+ iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+ iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
+ MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
@@ -328,8 +365,7 @@
imx51_add_fec(NULL);
/* Set the PAD settings for the pwr key. */
- power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2;
- mxc_iomux_v3_setup_pad(&power_key);
+ mxc_iomux_v3_setup_pad(power_key);
imx51_add_gpio_keys(&imx_button_data);
imx51_add_imx_i2c(0, &babbage_i2c_data);
@@ -346,11 +382,16 @@
gpio_usbh1_active();
mxc_register_device(&mxc_usbh1_device, &usbh1_config);
/* setback USBH1_STP to be function */
- mxc_iomux_v3_setup_pad(&usbh1stp);
+ mxc_iomux_v3_setup_pad(usbh1stp);
babbage_usbhub_reset();
- imx51_add_esdhc(0, NULL);
- imx51_add_esdhc(1, NULL);
+ imx51_add_sdhci_esdhc_imx(0, NULL);
+ imx51_add_sdhci_esdhc_imx(1, NULL);
+
+ spi_register_board_info(mx51_babbage_spi_board_info,
+ ARRAY_SIZE(mx51_babbage_spi_board_info));
+ imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
+ imx51_add_imx2_wdt(0, NULL);
}
static void __init mx51_babbage_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 6e623bd..b7946f8 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -18,9 +18,13 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/fsl_devices.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -39,12 +43,81 @@
#define MX51_USB_PLL_DIV_24_MHZ 0x01
-static struct pad_desc mx51efikamx_pads[] = {
+#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
+#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17)
+#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11)
+
+#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13)
+#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14)
+#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15)
+
+#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31)
+
+#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
+#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
+
+/* board 1.1 doesn't have same reset gpio */
+#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2)
+#define EFIKAMX_RESET IMX_GPIO_NR(1, 4)
+
+/* the pci ids pin have pull up. they're driven low according to board id */
+#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+
+static iomux_v3_cfg_t mx51efikamx_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
MX51_PAD_UART1_RTS__UART1_RTS,
MX51_PAD_UART1_CTS__UART1_CTS,
+ /* board id */
+ MX51_PAD_PCBID0,
+ MX51_PAD_PCBID1,
+ MX51_PAD_PCBID2,
+
+ /* SD 1 */
+ MX51_PAD_SD1_CMD__SD1_CMD,
+ MX51_PAD_SD1_CLK__SD1_CLK,
+ MX51_PAD_SD1_DATA0__SD1_DATA0,
+ MX51_PAD_SD1_DATA1__SD1_DATA1,
+ MX51_PAD_SD1_DATA2__SD1_DATA2,
+ MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+ /* SD 2 */
+ MX51_PAD_SD2_CMD__SD2_CMD,
+ MX51_PAD_SD2_CLK__SD2_CLK,
+ MX51_PAD_SD2_DATA0__SD2_DATA0,
+ MX51_PAD_SD2_DATA1__SD2_DATA1,
+ MX51_PAD_SD2_DATA2__SD2_DATA2,
+ MX51_PAD_SD2_DATA3__SD2_DATA3,
+
+ /* SD/MMC WP/CD */
+ MX51_PAD_GPIO1_0__SD1_CD,
+ MX51_PAD_GPIO1_1__SD1_WP,
+ MX51_PAD_GPIO1_7__SD2_WP,
+ MX51_PAD_GPIO1_8__SD2_CD,
+
+ /* leds */
+ MX51_PAD_CSI1_D9__GPIO3_13,
+ MX51_PAD_CSI1_VSYNC__GPIO3_14,
+ MX51_PAD_CSI1_HSYNC__GPIO3_15,
+
+ /* power key */
+ MX51_PAD_PWRKEY,
+
+ /* spi */
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+ MX51_PAD_CSPI1_SS0__GPIO4_24,
+ MX51_PAD_CSPI1_SS1__GPIO4_25,
+ MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+
+ /* reset */
+ MX51_PAD_DI1_PIN13__GPIO3_2,
+ MX51_PAD_GPIO1_4__GPIO1_4,
};
/* Serial ports */
@@ -75,6 +148,8 @@
void __iomem *usb_base;
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
/* Set the PHY clock to 19.2MHz */
@@ -92,12 +167,182 @@
.flags = MXC_EHCI_INTERNAL_PHY,
};
+/* PCBID2 PCBID1 PCBID0 STATE
+ 1 1 1 ER1:rev1.1
+ 1 1 0 ER2:rev1.2
+ 1 0 1 ER3:rev1.3
+ 1 0 0 ER4:rev1.4
+*/
+static void __init mx51_efikamx_board_id(void)
+{
+ int id;
+
+ /* things are taking time to settle */
+ msleep(150);
+
+ gpio_request(EFIKAMX_PCBID0, "pcbid0");
+ gpio_direction_input(EFIKAMX_PCBID0);
+ gpio_request(EFIKAMX_PCBID1, "pcbid1");
+ gpio_direction_input(EFIKAMX_PCBID1);
+ gpio_request(EFIKAMX_PCBID2, "pcbid2");
+ gpio_direction_input(EFIKAMX_PCBID2);
+
+ id = gpio_get_value(EFIKAMX_PCBID0);
+ id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
+ id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+
+ switch (id) {
+ case 7:
+ system_rev = 0x11;
+ break;
+ case 6:
+ system_rev = 0x12;
+ break;
+ case 5:
+ system_rev = 0x13;
+ break;
+ case 4:
+ system_rev = 0x14;
+ break;
+ default:
+ system_rev = 0x10;
+ break;
+ }
+
+ if ((system_rev == 0x10)
+ || (system_rev == 0x12)
+ || (system_rev == 0x14)) {
+ printk(KERN_WARNING
+ "EfikaMX: Unsupported board revision 1.%u!\n",
+ system_rev & 0xf);
+ }
+}
+
+static struct gpio_led mx51_efikamx_leds[] = {
+ {
+ .name = "efikamx:green",
+ .default_trigger = "default-on",
+ .gpio = EFIKAMX_GREEN_LED,
+ },
+ {
+ .name = "efikamx:red",
+ .default_trigger = "ide-disk",
+ .gpio = EFIKAMX_RED_LED,
+ },
+ {
+ .name = "efikamx:blue",
+ .default_trigger = "mmc0",
+ .gpio = EFIKAMX_BLUE_LED,
+ },
+};
+
+static struct gpio_led_platform_data mx51_efikamx_leds_data = {
+ .leds = mx51_efikamx_leds,
+ .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
+};
+
+static struct platform_device mx51_efikamx_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mx51_efikamx_leds_data,
+ },
+};
+
+static struct gpio_keys_button mx51_efikamx_powerkey[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = EFIKAMX_POWER_KEY,
+ .type = EV_PWR,
+ .desc = "Power Button (CM)",
+ .wakeup = 1,
+ .debounce_interval = 10, /* ms */
+ },
+};
+
+static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
+ .buttons = mx51_efikamx_powerkey,
+ .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
+};
+
+static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_256K,
+ },
+ {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ },
+};
+
+static struct flash_platform_data mx51_efikamx_spi_flash_data = {
+ .name = "spi_flash",
+ .parts = mx51_efikamx_spi_nor_partitions,
+ .nr_parts = ARRAY_SIZE(mx51_efikamx_spi_nor_partitions),
+ .type = "sst25vf032b",
+};
+
+static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 25000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &mx51_efikamx_spi_flash_data,
+ .irq = -1,
+ },
+};
+
+static int mx51_efikamx_spi_cs[] = {
+ EFIKAMX_SPI_CS0,
+ EFIKAMX_SPI_CS1,
+};
+
+static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = {
+ .chipselect = mx51_efikamx_spi_cs,
+ .num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs),
+};
+
+void mx51_efikamx_reset(void)
+{
+ if (system_rev == 0x11)
+ gpio_direction_output(EFIKAMX_RESET1_1, 0);
+ else
+ gpio_direction_output(EFIKAMX_RESET, 0);
+}
+
static void __init mxc_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
+ mx51_efikamx_board_id();
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
mxc_init_imx_uart();
+ imx51_add_sdhci_esdhc_imx(0, NULL);
+
+ /* on < 1.2 boards both SD controllers are used */
+ if (system_rev < 0x12) {
+ imx51_add_sdhci_esdhc_imx(1, NULL);
+ mx51_efikamx_leds[2].default_trigger = "mmc1";
+ }
+
+ platform_device_register(&mx51_efikamx_leds_device);
+ imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
+
+ spi_register_board_info(mx51_efikamx_spi_board_info,
+ ARRAY_SIZE(mx51_efikamx_spi_board_info));
+ imx51_add_ecspi(0, &mx51_efikamx_spi_pdata);
+
+ if (system_rev == 0x11) {
+ gpio_request(EFIKAMX_RESET1_1, "reset");
+ gpio_direction_output(EFIKAMX_RESET1_1, 1);
+ } else {
+ gpio_request(EFIKAMX_RESET, "reset");
+ gpio_direction_output(EFIKAMX_RESET, 1);
+ }
}
static void __init mx51_efikamx_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
new file mode 100644
index 0000000..fa97d0d
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx53.h>
+
+#include "crm_regs.h"
+#include "devices-imx53.h"
+
+static iomux_v3_cfg_t mx53_evk_pads[] = {
+ MX53_PAD_CSI0_D10__UART1_TXD,
+ MX53_PAD_CSI0_D11__UART1_RXD,
+ MX53_PAD_ATA_DIOW__UART1_TXD,
+ MX53_PAD_ATA_DMACK__UART1_RXD,
+
+ MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
+ MX53_PAD_ATA_DMARQ__UART2_TXD,
+ MX53_PAD_ATA_DIOR__UART2_RTS,
+ MX53_PAD_ATA_INTRQ__UART2_CTS,
+
+ MX53_PAD_ATA_CS_0__UART3_TXD,
+ MX53_PAD_ATA_CS_1__UART3_RXD,
+ MX53_PAD_ATA_DA_1__UART3_CTS,
+ MX53_PAD_ATA_DA_2__UART3_RTS,
+};
+
+static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mx53_evk_init_uart(void)
+{
+ imx53_add_imx_uart(0, &mx53_evk_uart_pdata);
+ imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
+ imx53_add_imx_uart(2, &mx53_evk_uart_pdata);
+}
+
+static void __init mx53_evk_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
+ ARRAY_SIZE(mx53_evk_pads));
+ mx53_evk_init_uart();
+}
+
+static void __init mx53_evk_timer_init(void)
+{
+ mx53_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mx53_evk_timer = {
+ .init = mx53_evk_timer_init,
+};
+
+MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
+ .map_io = mx53_map_io,
+ .init_irq = mx53_init_irq,
+ .init_machine = mx53_evk_board_init,
+ .timer = &mx53_evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
similarity index 78%
rename from arch/arm/mach-mx5/clock-mx51.c
rename to arch/arm/mach-mx5/clock-mx51-mx53.c
index 5975edb..785e1a3 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -33,11 +33,15 @@
static struct clk pll1_sw_clk;
static struct clk pll2_sw_clk;
static struct clk pll3_sw_clk;
+static struct clk mx53_pll4_sw_clk;
static struct clk lp_apm_clk;
static struct clk periph_apm_clk;
static struct clk ahb_clk;
static struct clk ipg_clk;
static struct clk usboh3_clk;
+static struct clk emi_fast_clk;
+static struct clk ipu_clk;
+static struct clk mipi_hsc1_clk;
#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
@@ -123,7 +127,7 @@
return -EINVAL;
}
-static inline void __iomem *_get_pll_base(struct clk *pll)
+static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
{
if (pll == &pll1_main_clk)
return MX51_DPLL1_BASE;
@@ -137,6 +141,30 @@
return NULL;
}
+static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
+{
+ if (pll == &pll1_main_clk)
+ return MX53_DPLL1_BASE;
+ else if (pll == &pll2_sw_clk)
+ return MX53_DPLL2_BASE;
+ else if (pll == &pll3_sw_clk)
+ return MX53_DPLL3_BASE;
+ else if (pll == &mx53_pll4_sw_clk)
+ return MX53_DPLL4_BASE;
+ else
+ BUG();
+
+ return NULL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+ if (cpu_is_mx51())
+ return _mx51_get_pll_base(pll);
+ else
+ return _mx53_get_pll_base(pll);
+}
+
static unsigned long clk_pll_get_rate(struct clk *clk)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
@@ -514,7 +542,10 @@
/* Handshake with MAX when LPM is entered. */
reg = __raw_readl(MXC_CCM_CLPCR);
- reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ if (cpu_is_mx51())
+ reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ else if (cpu_is_mx53())
+ reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
__raw_writel(reg, MXC_CCM_CLPCR);
return 0;
@@ -528,7 +559,10 @@
/* No Handshake with MAX when LPM is entered as its disabled. */
reg = __raw_readl(MXC_CCM_CLPCR);
- reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ if (cpu_is_mx51())
+ reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ else if (cpu_is_mx53())
+ reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
__raw_writel(reg, MXC_CCM_CLPCR);
}
@@ -679,6 +713,19 @@
return clk_get_rate(clk->parent) / div;
}
+static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+ u32 reg, div;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
+ MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
+ rate = clk_get_rate(clk->parent) / div;
+
+ return rate;
+}
+
/* External high frequency clock */
static struct clk ckih_clk = {
.get_rate = get_high_reference_clock_rate,
@@ -739,6 +786,14 @@
.disable = _clk_pll_disable,
};
+/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
+static struct clk mx53_pll4_sw_clk = {
+ .parent = &osc_clk,
+ .set_rate = _clk_pll_set_rate,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
/* Low-power Audio Playback Mode clock */
static struct clk lp_apm_clk = {
.parent = &osc_clk,
@@ -763,6 +818,12 @@
.round_rate = _clk_ahb_round_rate,
};
+static struct clk iim_clk = {
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG15_OFFSET,
+};
+
/* Main IP interface clock for access to registers */
static struct clk ipg_clk = {
.parent = &ahb_clk,
@@ -810,6 +871,10 @@
.id = 0,
};
+static struct clk dummy_clk = {
+ .id = 0,
+};
+
static struct clk emi_slow_clk = {
.parent = &pll2_sw_clk,
.enable_reg = MXC_CCM_CCGR5,
@@ -819,6 +884,109 @@
.get_rate = clk_emi_slow_get_rate,
};
+static int clk_ipu_enable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_enable(clk);
+
+ /* Enable handshake with IPU when certain clock rates are changed */
+ reg = __raw_readl(MXC_CCM_CCDR);
+ reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
+ __raw_writel(reg, MXC_CCM_CCDR);
+
+ /* Enable handshake with IPU when LPM is entered */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+
+ return 0;
+}
+
+static void clk_ipu_disable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_disable(clk);
+
+ /* Disable handshake with IPU whe dividers are changed */
+ reg = __raw_readl(MXC_CCM_CCDR);
+ reg |= MXC_CCM_CCDR_IPU_HS_MASK;
+ __raw_writel(reg, MXC_CCM_CCDR);
+
+ /* Disable handshake with IPU when LPM is entered */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static struct clk ahbmux1_clk = {
+ .parent = &ahb_clk,
+ .secondary = &ahb_max_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk ipu_sec_clk = {
+ .parent = &emi_fast_clk,
+ .secondary = &ahbmux1_clk,
+};
+
+static struct clk ddr_hf_clk = {
+ .parent = &pll1_sw_clk,
+ .get_rate = _clk_ddr_hf_get_rate,
+};
+
+static struct clk ddr_clk = {
+ .parent = &ddr_hf_clk,
+};
+
+/* clock definitions for MIPI HSC unit which has been removed
+ * from documentation, but not from hardware
+ */
+static int _clk_hsc_enable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_enable(clk);
+ /* Handshake with IPU when certain clock rates are changed. */
+ reg = __raw_readl(MXC_CCM_CCDR);
+ reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
+ __raw_writel(reg, MXC_CCM_CCDR);
+
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+
+ return 0;
+}
+
+static void _clk_hsc_disable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_disable(clk);
+ /* No handshake with HSC as its not enabled. */
+ reg = __raw_readl(MXC_CCM_CCDR);
+ reg |= MXC_CCM_CCDR_HSC_HS_MASK;
+ __raw_writel(reg, MXC_CCM_CCDR);
+
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static struct clk mipi_hsp_clk = {
+ .parent = &ipu_clk,
+ .enable_reg = MXC_CCM_CCGR4,
+ .enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
+ .enable = _clk_hsc_enable,
+ .disable = _clk_hsc_disable,
+ .secondary = &mipi_hsc1_clk,
+};
+
#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \
static struct clk name = { \
.id = i, \
@@ -927,6 +1095,41 @@
.parent = &pll2_sw_clk,
.get_rate = clk_usboh3_get_rate,
.set_parent = clk_usboh3_set_parent,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable,
+ .enable_reg = MXC_CCM_CCGR2,
+ .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+};
+
+static struct clk usb_ahb_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable,
+ .enable_reg = MXC_CCM_CCGR2,
+ .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+};
+
+static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
+
+ if (parent == &pll3_sw_clk)
+ reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
+
+ __raw_writel(reg, MXC_CCM_CSCMR1);
+
+ return 0;
+}
+
+static struct clk usb_phy1_clk = {
+ .parent = &pll3_sw_clk,
+ .set_parent = clk_usb_phy1_set_parent,
+ .enable = _clk_ccgr_enable,
+ .enable_reg = MXC_CCM_CCGR2,
+ .enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
+ .disable = _clk_ccgr_disable,
};
/* eCSPI */
@@ -1013,6 +1216,10 @@
NULL, NULL, &ipg_clk, NULL);
DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
+DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET,
+ NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk);
/* eCSPI */
DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -1046,6 +1253,23 @@
DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
+DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
+DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
+DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
+
+/* IPU */
+DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
+
+DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
+ NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
+ &ddr_clk, NULL);
+
+DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, &pll3_sw_clk, NULL);
+DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &pll3_sw_clk, NULL);
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -1053,7 +1277,7 @@
.clk = &c, \
},
-static struct clk_lookup lookups[] = {
+static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@@ -1063,15 +1287,19 @@
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
_REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
@@ -1082,6 +1310,22 @@
_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
+ _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
+ _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
+ _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
+ _REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
+ _REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
+ _REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
+ _REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
+};
+
+static struct clk_lookup mx53_lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
};
static void clk_tree_init(void)
@@ -1114,14 +1358,22 @@
ckih2_reference = ckih2;
oscillator_reference = osc;
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++)
+ clkdev_add(&mx51_lookups[i]);
clk_tree_init();
+ clk_set_parent(&uart_root_clk, &pll3_sw_clk);
clk_enable(&cpu_clk);
clk_enable(&main_bus_clk);
+ clk_enable(&iim_clk);
+ mx51_revision();
+ clk_disable(&iim_clk);
+
+ /* move usb_phy_clk to 24MHz */
+ clk_set_parent(&usb_phy1_clk, &osc_clk);
+
/* set the usboh3_clk parent to pll2_sw_clk */
clk_set_parent(&usboh3_clk, &pll2_sw_clk);
@@ -1138,3 +1390,31 @@
MX51_MXC_INT_GPT);
return 0;
}
+
+int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2)
+{
+ int i;
+
+ external_low_reference = ckil;
+ external_high_reference = ckih1;
+ ckih2_reference = ckih2;
+ oscillator_reference = osc;
+
+ for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++)
+ clkdev_add(&mx53_lookups[i]);
+
+ clk_tree_init();
+
+ clk_enable(&cpu_clk);
+ clk_enable(&main_bus_clk);
+
+ clk_enable(&iim_clk);
+ mx53_revision();
+ clk_disable(&iim_clk);
+
+ /* System timer */
+ mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
+ MX53_INT_GPT);
+ return 0;
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index eaacb6e..d40671d 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -20,37 +20,18 @@
static int cpu_silicon_rev = -1;
-#define SI_REV 0x48
+#define IIM_SREV 0x24
-static void query_silicon_parameter(void)
+static int get_mx51_srev(void)
{
- void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE);
- u32 rev;
+ void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
+ u32 rev = readl(iim_base + IIM_SREV) & 0xff;
- if (!rom) {
- cpu_silicon_rev = -EINVAL;
- return;
- }
-
- rev = readl(rom + SI_REV);
- switch (rev) {
- case 0x1:
- cpu_silicon_rev = MX51_CHIP_REV_1_0;
- break;
- case 0x2:
- cpu_silicon_rev = MX51_CHIP_REV_1_1;
- break;
- case 0x10:
- cpu_silicon_rev = MX51_CHIP_REV_2_0;
- break;
- case 0x20:
- cpu_silicon_rev = MX51_CHIP_REV_3_0;
- break;
- default:
- cpu_silicon_rev = 0;
- }
-
- iounmap(rom);
+ if (rev == 0x0)
+ return IMX_CHIP_REVISION_2_0;
+ else if (rev == 0x10)
+ return IMX_CHIP_REVISION_3_0;
+ return 0;
}
/*
@@ -64,7 +45,7 @@
return -EINVAL;
if (cpu_silicon_rev == -1)
- query_silicon_parameter();
+ cpu_silicon_rev = get_mx51_srev();
return cpu_silicon_rev;
}
@@ -79,7 +60,10 @@
*/
static int __init mx51_neon_fixup(void)
{
- if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) {
+ if (!cpu_is_mx51())
+ return 0;
+
+ if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
elf_hwcap &= ~HWCAP_NEON;
pr_info("Turning off NEON support, detected broken NEON implementation\n");
}
@@ -89,29 +73,65 @@
late_initcall(mx51_neon_fixup);
#endif
+static int get_mx53_srev(void)
+{
+ void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
+ u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+
+ if (rev == 0x0)
+ return IMX_CHIP_REVISION_1_0;
+ else if (rev == 0x10)
+ return IMX_CHIP_REVISION_2_0;
+ return 0;
+}
+
+/*
+ * Returns:
+ * the silicon revision of the cpu
+ * -EINVAL - not a mx53
+ */
+int mx53_revision(void)
+{
+ if (!cpu_is_mx53())
+ return -EINVAL;
+
+ if (cpu_silicon_rev == -1)
+ cpu_silicon_rev = get_mx53_srev();
+
+ return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx53_revision);
+
static int __init post_cpu_init(void)
{
unsigned int reg;
void __iomem *base;
- if (!cpu_is_mx51())
- return 0;
+ if (cpu_is_mx51() || cpu_is_mx53()) {
+ if (cpu_is_mx51())
+ base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+ else
+ base = MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR);
- base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
- __raw_writel(0x0, base + 0x40);
- __raw_writel(0x0, base + 0x44);
- __raw_writel(0x0, base + 0x48);
- __raw_writel(0x0, base + 0x4C);
- reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
- __raw_writel(reg, base + 0x50);
+ __raw_writel(0x0, base + 0x40);
+ __raw_writel(0x0, base + 0x44);
+ __raw_writel(0x0, base + 0x48);
+ __raw_writel(0x0, base + 0x4C);
+ reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+ __raw_writel(reg, base + 0x50);
- base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
- __raw_writel(0x0, base + 0x40);
- __raw_writel(0x0, base + 0x44);
- __raw_writel(0x0, base + 0x48);
- __raw_writel(0x0, base + 0x4C);
- reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
- __raw_writel(reg, base + 0x50);
+ if (cpu_is_mx51())
+ base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+ else
+ base = MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR);
+
+ __raw_writel(0x0, base + 0x40);
+ __raw_writel(0x0, base + 0x44);
+ __raw_writel(0x0, base + 0x48);
+ __raw_writel(0x0, base + 0x4C);
+ reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+ __raw_writel(reg, base + 0x50);
+ }
return 0;
}
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
index c776b9a..b462c22 100644
--- a/arch/arm/mach-mx5/crm_regs.h
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -18,6 +18,13 @@
#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
+/*MX53*/
+#define MX53_CCM_BASE MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
+#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
+#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
+#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
#define MXC_PLL_DP_CONFIG 0x04
@@ -380,7 +387,8 @@
/* Define the bits in register CLPCR */
#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23)
#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22)
-#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
+#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
+#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 25)
#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20)
#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19)
#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index 8c50cb5..6302e46 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -31,6 +31,11 @@
#define imx51_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
+extern const struct imx_sdhci_esdhc_imx_data
+imx51_sdhci_esdhc_imx_data[] __initconst;
+#define imx51_add_sdhci_esdhc_imx(id, pdata) \
+ imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
+
extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
#define imx51_add_cspi(pdata) \
imx_add_spi_imx(&imx51_cspi_data, pdata)
@@ -39,6 +44,6 @@
#define imx51_add_ecspi(id, pdata) \
imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-extern const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst;
-#define imx51_add_esdhc(id, pdata) \
- imx_add_esdhc(&imx51_esdhc_data[id], pdata)
+extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst;
+#define imx51_add_imx2_wdt(id, pdata) \
+ imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
new file mode 100644
index 0000000..9d0ec25
--- /dev/null
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx53.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst;
+#define imx53_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices-mx50.h b/arch/arm/mach-mx5/devices-mx50.h
new file mode 100644
index 0000000..98ab074
--- /dev/null
+++ b/arch/arm/mach-mx5/devices-mx50.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <mach/mx50.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst;
+#define imx50_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 4c7be87..1bda5cb 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -97,19 +97,27 @@
},
};
-static struct resource mxc_wdt_resources[] = {
+static struct resource usbh2_resources[] = {
{
- .start = MX51_WDOG_BASE_ADDR,
- .end = MX51_WDOG_BASE_ADDR + SZ_16K - 1,
+ .start = MX51_OTG_BASE_ADDR + 0x400,
+ .end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = MX51_MXC_INT_USB_H2,
+ .flags = IORESOURCE_IRQ,
+ },
};
-struct platform_device mxc_wdt = {
- .name = "imx2-wdt",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_wdt_resources),
- .resource = mxc_wdt_resources,
+struct platform_device mxc_usbh2_device = {
+ .name = "mxc-ehci",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(usbh2_resources),
+ .resource = usbh2_resources,
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
};
static struct resource mxc_kpp_resources[] = {
@@ -160,9 +168,36 @@
.irq_high = MX51_MXC_INT_GPIO4_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
},
+ {
+ .chip.label = "gpio-4",
+ .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
+ .irq = MX53_INT_GPIO5_LOW,
+ .irq_high = MX53_INT_GPIO5_HIGH,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
+ },
+ {
+ .chip.label = "gpio-5",
+ .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
+ .irq = MX53_INT_GPIO6_LOW,
+ .irq_high = MX53_INT_GPIO6_HIGH,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
+ },
+ {
+ .chip.label = "gpio-6",
+ .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
+ .irq = MX53_INT_GPIO7_LOW,
+ .irq_high = MX53_INT_GPIO7_HIGH,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
+ },
};
int __init imx51_register_gpios(void)
{
+ return mxc_gpio_init(mxc_gpio_ports, 4);
+}
+
+int __init imx53_register_gpios(void)
+{
return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
}
+
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index af1d07c..16891aa 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -1,6 +1,6 @@
extern struct platform_device mxc_usbdr_host_device;
extern struct platform_device mxc_usbh1_device;
+extern struct platform_device mxc_usbh2_device;
extern struct platform_device mxc_usbdr_udc_device;
-extern struct platform_device mxc_wdt;
extern struct platform_device mxc_hsi2c_device;
extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index a2e6e8c..c96d018 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -33,12 +33,12 @@
#include "devices-imx51.h"
#include "devices.h"
-#define MBIMX51_TSC2007_GPIO (2*32 + 30)
+#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30)
#define MBIMX51_TSC2007_IRQ (MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
-#define MBIMX51_LED0 (2*32 + 5)
-#define MBIMX51_LED1 (2*32 + 6)
-#define MBIMX51_LED2 (2*32 + 7)
-#define MBIMX51_LED3 (2*32 + 8)
+#define MBIMX51_LED0 IMX_GPIO_NR(3, 5)
+#define MBIMX51_LED1 IMX_GPIO_NR(3, 6)
+#define MBIMX51_LED2 IMX_GPIO_NR(3, 7)
+#define MBIMX51_LED3 IMX_GPIO_NR(3, 8)
static struct gpio_led mbimx51_leds[] = {
{
@@ -84,7 +84,7 @@
&mbimx51_leds_gpio,
};
-static struct pad_desc mbimx51_pads[] = {
+static iomux_v3_cfg_t mbimx51_pads[] = {
/* UART2 */
MX51_PAD_UART2_RXD__UART2_RXD,
MX51_PAD_UART2_TXD__UART2_TXD,
@@ -96,13 +96,13 @@
MX51_PAD_KEY_COL5__UART3_CTS,
/* TSC2007 IRQ */
- MX51_PAD_NANDF_D10__GPIO_3_30,
+ MX51_PAD_NANDF_D10__GPIO3_30,
/* LEDS */
- MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
- MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
- MX51_PAD_DISPB2_SER_CLK__GPIO_3_7,
- MX51_PAD_DISPB2_SER_RS__GPIO_3_8,
+ MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
+ MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
+ MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
+ MX51_PAD_DISPB2_SER_RS__GPIO3_8,
/* KPP */
MX51_PAD_KEY_ROW0__KEY_ROW0,
@@ -217,6 +217,6 @@
i2c_register_board_info(1, mbimx51_i2c_devices,
ARRAY_SIZE(mbimx51_i2c_devices));
- imx51_add_esdhc(0, NULL);
- imx51_add_esdhc(1, NULL);
+ imx51_add_sdhci_esdhc_imx(0, NULL);
+ imx51_add_sdhci_esdhc_imx(1, NULL);
}
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index 2b48f51..c372a43 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -45,14 +45,13 @@
#include "devices-imx51.h"
#include "devices.h"
-#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \
- MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-
-static struct pad_desc eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LED */
- MX51_PAD_NANDF_D10__GPIO_3_30,
+ MX51_PAD_NANDF_D10__GPIO3_30,
/* SWITCH */
- MBIMXSD_GPIO_3_31,
+ _MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
/* UART2 */
MX51_PAD_UART2_RXD__UART2_RXD,
MX51_PAD_UART2_TXD__UART2_TXD,
@@ -70,8 +69,8 @@
MX51_PAD_SD1_DATA3__SD1_DATA3,
};
-#define GPIO_LED1 (2 * 32 + 30)
-#define GPIO_SWITCH1 (2 * 32 + 31)
+#define GPIO_LED1 IMX_GPIO_NR(3, 30)
+#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31)
static struct gpio_led eukrea_mbimxsd_leds[] = {
{
@@ -149,7 +148,7 @@
imx51_add_imx_uart(1, NULL);
imx51_add_imx_uart(2, &uart_pdata);
- imx51_add_esdhc(0, NULL);
+ imx51_add_sdhci_esdhc_imx(0, NULL);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
new file mode 100644
index 0000000..8c6540e
--- /dev/null
+++ b/arch/arm/mach-mx5/mm-mx50.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * Define the MX50 memory map.
+ */
+static struct map_desc mx50_io_desc[] __initdata = {
+ imx_map_entry(MX50, TZIC, MT_DEVICE),
+ imx_map_entry(MX50, SPBA0, MT_DEVICE),
+ imx_map_entry(MX50, AIPS1, MT_DEVICE),
+ imx_map_entry(MX50, AIPS2, MT_DEVICE),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx50_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX50);
+ mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
+ iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
+}
+
+int imx50_register_gpios(void);
+
+void __init mx50_init_irq(void)
+{
+ tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
+ imx50_register_gpios();
+}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index bc3f30d..457f9f9 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -23,33 +23,21 @@
/*
* Define the MX51 memory map.
*/
-static struct map_desc mxc_io_desc[] __initdata = {
- {
- .virtual = MX51_IRAM_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
- .length = MX51_IRAM_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = MX51_DEBUG_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
- .length = MX51_DEBUG_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = MX51_AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
- .length = MX51_AIPS1_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = MX51_SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
- .length = MX51_SPBA0_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = MX51_AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
- .length = MX51_AIPS2_SIZE,
- .type = MT_DEVICE
- },
+static struct map_desc mx51_io_desc[] __initdata = {
+ imx_map_entry(MX51, IRAM, MT_DEVICE),
+ imx_map_entry(MX51, DEBUG, MT_DEVICE),
+ imx_map_entry(MX51, AIPS1, MT_DEVICE),
+ imx_map_entry(MX51, SPBA0, MT_DEVICE),
+ imx_map_entry(MX51, AIPS2, MT_DEVICE),
+};
+
+/*
+ * Define the MX53 memory map.
+ */
+static struct map_desc mx53_io_desc[] __initdata = {
+ imx_map_entry(MX53, AIPS1, MT_DEVICE),
+ imx_map_entry(MX53, SPBA0, MT_DEVICE),
+ imx_map_entry(MX53, AIPS2, MT_DEVICE),
};
/*
@@ -61,8 +49,16 @@
{
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+ mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
+ iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
+}
+
+void __init mx53_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX53);
+ mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR));
+ iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
}
int imx51_register_gpios(void);
@@ -72,7 +68,7 @@
unsigned long tzic_addr;
void __iomem *tzic_virt;
- if (mx51_revision() < MX51_CHIP_REV_2_0)
+ if (mx51_revision() < IMX_CHIP_REVISION_2_0)
tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
else
tzic_addr = MX51_TZIC_BASE_ADDR;
@@ -84,3 +80,20 @@
tzic_init_irq(tzic_virt);
imx51_register_gpios();
}
+
+int imx53_register_gpios(void);
+
+void __init mx53_init_irq(void)
+{
+ unsigned long tzic_addr;
+ void __iomem *tzic_virt;
+
+ tzic_addr = MX53_TZIC_BASE_ADDR;
+
+ tzic_virt = ioremap(tzic_addr, SZ_16K);
+ if (!tzic_virt)
+ panic("unable to map TZIC interrupt controller\n");
+
+ tzic_init_irq(tzic_virt);
+ imx53_register_gpios();
+}
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
index aeccfd75..7652c30 100644
--- a/arch/arm/mach-mxc91231/mm.c
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -27,48 +27,15 @@
/*
* This structure defines the MXC memory map.
*/
-static struct map_desc mxc_io_desc[] __initdata = {
- {
- .virtual = MXC91231_L2CC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
- .length = MXC91231_L2CC_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = MXC91231_X_MEMC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
- .length = MXC91231_X_MEMC_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = MXC91231_ROMP_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
- .length = MXC91231_ROMP_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = MXC91231_AVIC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
- .length = MXC91231_AVIC_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = MXC91231_AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
- .length = MXC91231_AIPS1_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = MXC91231_SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
- .length = MXC91231_SPBA0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = MXC91231_SPBA1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
- .length = MXC91231_SPBA1_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = MXC91231_AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
- .length = MXC91231_AIPS2_SIZE,
- .type = MT_DEVICE,
- },
+static struct map_desc mxc91231_io_desc[] __initdata = {
+ imx_map_entry(MXC91231, L2CC, MT_DEVICE),
+ imx_map_entry(MXC91231, X_MEMC, MT_DEVICE),
+ imx_map_entry(MXC91231, ROMP, MT_DEVICE),
+ imx_map_entry(MXC91231, AVIC, MT_DEVICE),
+ imx_map_entry(MXC91231, AIPS1, MT_DEVICE),
+ imx_map_entry(MXC91231, SPBA0, MT_DEVICE),
+ imx_map_entry(MXC91231, SPBA1, MT_DEVICE),
+ imx_map_entry(MXC91231, AIPS2, MT_DEVICE),
};
/*
@@ -80,7 +47,7 @@
{
mxc_set_cpu_type(MXC_CPU_MXC91231);
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+ iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc));
}
int mxc91231_register_gpios(void);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
new file mode 100644
index 0000000..c4ac7b4
--- /dev/null
+++ b/arch/arm/mach-mxs/Kconfig
@@ -0,0 +1,34 @@
+if ARCH_MXS
+
+source "arch/arm/mach-mxs/devices/Kconfig"
+
+config SOC_IMX23
+ bool
+ select CPU_ARM926T
+
+config SOC_IMX28
+ bool
+ select CPU_ARM926T
+
+comment "MXS platforms:"
+
+config MACH_MX23EVK
+ bool "Support MX23EVK Platform"
+ select SOC_IMX23
+ select MXS_HAVE_PLATFORM_DUART
+ default y
+ help
+ Include support for MX23EVK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX28EVK
+ bool "Support MX28EVK Platform"
+ select SOC_IMX28
+ select MXS_HAVE_PLATFORM_DUART
+ select MXS_HAVE_PLATFORM_FEC
+ default y
+ help
+ Include support for MX28EVK platform. This includes specific
+ configurations for the board and its peripherals.
+
+endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
new file mode 100644
index 0000000..39d3f9c
--- /dev/null
+++ b/arch/arm/mach-mxs/Makefile
@@ -0,0 +1,10 @@
+# Common support
+obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
+
+obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
+obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+
+obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
+obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+
+obj-y += devices/
diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
new file mode 100644
index 0000000..eb541e0
--- /dev/null
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x40008000
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
new file mode 100644
index 0000000..8f5a19a
--- /dev/null
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -0,0 +1,526 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/mx23.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "regs-clkctrl-mx23.h"
+
+#define CLKCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
+#define DIGCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
+
+#define PARENT_RATE_SHIFT 8
+
+static int _raw_clk_enable(struct clk *clk)
+{
+ u32 reg;
+
+ if (clk->enable_reg) {
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+ }
+
+ return 0;
+}
+
+static void _raw_clk_disable(struct clk *clk)
+{
+ u32 reg;
+
+ if (clk->enable_reg) {
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+ }
+}
+
+/*
+ * ref_xtal_clk
+ */
+static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
+{
+ return 24000000;
+}
+
+static struct clk ref_xtal_clk = {
+ .get_rate = ref_xtal_clk_get_rate,
+};
+
+/*
+ * pll_clk
+ */
+static unsigned long pll_clk_get_rate(struct clk *clk)
+{
+ return 480000000;
+}
+
+static int pll_clk_enable(struct clk *clk)
+{
+ __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
+ BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET);
+
+ /* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer
+ * and is incorrect (excessive). Per definition of the PLLCTRL0
+ * POWER field, waiting at least 10us.
+ */
+ udelay(10);
+
+ return 0;
+}
+
+static void pll_clk_disable(struct clk *clk)
+{
+ __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
+ BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR);
+}
+
+static struct clk pll_clk = {
+ .get_rate = pll_clk_get_rate,
+ .enable = pll_clk_enable,
+ .disable = pll_clk_disable,
+ .parent = &ref_xtal_clk,
+};
+
+/*
+ * ref_clk
+ */
+#define _CLK_GET_RATE_REF(name, sr, ss) \
+static unsigned long name##_get_rate(struct clk *clk) \
+{ \
+ unsigned long parent_rate; \
+ u32 reg, div; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \
+ div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \
+ parent_rate = clk_get_rate(clk->parent); \
+ \
+ return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \
+ div, PARENT_RATE_SHIFT); \
+}
+
+_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU)
+_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI)
+_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX)
+_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO)
+
+#define _DEFINE_CLOCK_REF(name, er, es) \
+ static struct clk name = { \
+ .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \
+ .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \
+ .get_rate = name##_get_rate, \
+ .enable = _raw_clk_enable, \
+ .disable = _raw_clk_disable, \
+ .parent = &pll_clk, \
+ }
+
+_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU);
+_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI);
+_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX);
+_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO);
+
+/*
+ * General clocks
+ *
+ * clk_get_rate
+ */
+static unsigned long rtc_clk_get_rate(struct clk *clk)
+{
+ /* ref_xtal_clk is implemented as the only parent */
+ return clk_get_rate(clk->parent) / 768;
+}
+
+static unsigned long clk32k_clk_get_rate(struct clk *clk)
+{
+ return clk->parent->get_rate(clk->parent) / 750;
+}
+
+#define _CLK_GET_RATE(name, rs) \
+static unsigned long name##_get_rate(struct clk *clk) \
+{ \
+ u32 reg, div; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
+ \
+ if (clk->parent == &ref_xtal_clk) \
+ div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \
+ BP_CLKCTRL_##rs##_DIV_XTAL; \
+ else \
+ div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \
+ BP_CLKCTRL_##rs##_DIV_##rs; \
+ \
+ if (!div) \
+ return -EINVAL; \
+ \
+ return clk_get_rate(clk->parent) / div; \
+}
+
+_CLK_GET_RATE(cpu_clk, CPU)
+_CLK_GET_RATE(emi_clk, EMI)
+
+#define _CLK_GET_RATE1(name, rs) \
+static unsigned long name##_get_rate(struct clk *clk) \
+{ \
+ u32 reg, div; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
+ div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \
+ \
+ if (!div) \
+ return -EINVAL; \
+ \
+ return clk_get_rate(clk->parent) / div; \
+}
+
+_CLK_GET_RATE1(hbus_clk, HBUS)
+_CLK_GET_RATE1(xbus_clk, XBUS)
+_CLK_GET_RATE1(ssp_clk, SSP)
+_CLK_GET_RATE1(gpmi_clk, GPMI)
+_CLK_GET_RATE1(lcdif_clk, PIX)
+
+#define _CLK_GET_RATE_STUB(name) \
+static unsigned long name##_get_rate(struct clk *clk) \
+{ \
+ return clk_get_rate(clk->parent); \
+}
+
+_CLK_GET_RATE_STUB(uart_clk)
+_CLK_GET_RATE_STUB(audio_clk)
+_CLK_GET_RATE_STUB(pwm_clk)
+
+/*
+ * clk_set_rate
+ */
+static int cpu_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, bm_busy, div_max, d, f, div, frac;
+ unsigned long diff, parent_rate, calc_rate;
+ int i;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->parent == &ref_xtal_clk) {
+ div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL;
+ bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;
+ div = DIV_ROUND_UP(parent_rate, rate);
+ if (div == 0 || div > div_max)
+ return -EINVAL;
+ } else {
+ div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU;
+ bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;
+ rate >>= PARENT_RATE_SHIFT;
+ parent_rate >>= PARENT_RATE_SHIFT;
+ diff = parent_rate;
+ div = frac = 1;
+ for (d = 1; d <= div_max; d++) {
+ f = parent_rate * 18 / d / rate;
+ if ((parent_rate * 18 / d) % rate)
+ f++;
+ if (f < 18 || f > 35)
+ continue;
+
+ calc_rate = parent_rate * 18 / f / d;
+ if (calc_rate > rate)
+ continue;
+
+ if (rate - calc_rate < diff) {
+ frac = f;
+ div = d;
+ diff = rate - calc_rate;
+ }
+
+ if (diff == 0)
+ break;
+ }
+
+ if (diff == parent_rate)
+ return -EINVAL;
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+ reg &= ~BM_CLKCTRL_FRAC_CPUFRAC;
+ reg |= frac;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+ }
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
+ reg &= ~BM_CLKCTRL_CPU_DIV_CPU;
+ reg |= div << BP_CLKCTRL_CPU_DIV_CPU;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
+
+ for (i = 10000; i; i--)
+ if (!(__raw_readl(CLKCTRL_BASE_ADDR +
+ HW_CLKCTRL_CPU) & bm_busy))
+ break;
+ if (!i) {
+ pr_err("%s: divider writing timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+#define _CLK_SET_RATE(name, dr) \
+static int name##_set_rate(struct clk *clk, unsigned long rate) \
+{ \
+ u32 reg, div_max, div; \
+ unsigned long parent_rate; \
+ int i; \
+ \
+ parent_rate = clk_get_rate(clk->parent); \
+ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
+ \
+ div = DIV_ROUND_UP(parent_rate, rate); \
+ if (div == 0 || div > div_max) \
+ return -EINVAL; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
+ reg &= ~BM_CLKCTRL_##dr##_DIV; \
+ reg |= div << BP_CLKCTRL_##dr##_DIV; \
+ if (reg | (1 << clk->enable_shift)) { \
+ pr_err("%s: clock is gated\n", __func__); \
+ return -EINVAL; \
+ } \
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
+ \
+ for (i = 10000; i; i--) \
+ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \
+ HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \
+ break; \
+ if (!i) { \
+ pr_err("%s: divider writing timeout\n", __func__); \
+ return -ETIMEDOUT; \
+ } \
+ \
+ return 0; \
+}
+
+_CLK_SET_RATE(xbus_clk, XBUS)
+_CLK_SET_RATE(ssp_clk, SSP)
+_CLK_SET_RATE(gpmi_clk, GPMI)
+_CLK_SET_RATE(lcdif_clk, PIX)
+
+#define _CLK_SET_RATE_STUB(name) \
+static int name##_set_rate(struct clk *clk, unsigned long rate) \
+{ \
+ return -EINVAL; \
+}
+
+_CLK_SET_RATE_STUB(emi_clk)
+_CLK_SET_RATE_STUB(uart_clk)
+_CLK_SET_RATE_STUB(audio_clk)
+_CLK_SET_RATE_STUB(pwm_clk)
+_CLK_SET_RATE_STUB(clk32k_clk)
+
+/*
+ * clk_set_parent
+ */
+#define _CLK_SET_PARENT(name, bit) \
+static int name##_set_parent(struct clk *clk, struct clk *parent) \
+{ \
+ if (parent != clk->parent) { \
+ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \
+ HW_CLKCTRL_CLKSEQ_TOG); \
+ clk->parent = parent; \
+ } \
+ \
+ return 0; \
+}
+
+_CLK_SET_PARENT(cpu_clk, CPU)
+_CLK_SET_PARENT(emi_clk, EMI)
+_CLK_SET_PARENT(ssp_clk, SSP)
+_CLK_SET_PARENT(gpmi_clk, GPMI)
+_CLK_SET_PARENT(lcdif_clk, PIX)
+
+#define _CLK_SET_PARENT_STUB(name) \
+static int name##_set_parent(struct clk *clk, struct clk *parent) \
+{ \
+ if (parent != clk->parent) \
+ return -EINVAL; \
+ else \
+ return 0; \
+}
+
+_CLK_SET_PARENT_STUB(uart_clk)
+_CLK_SET_PARENT_STUB(audio_clk)
+_CLK_SET_PARENT_STUB(pwm_clk)
+_CLK_SET_PARENT_STUB(clk32k_clk)
+
+/*
+ * clk definition
+ */
+static struct clk cpu_clk = {
+ .get_rate = cpu_clk_get_rate,
+ .set_rate = cpu_clk_set_rate,
+ .set_parent = cpu_clk_set_parent,
+ .parent = &ref_cpu_clk,
+};
+
+static struct clk hbus_clk = {
+ .get_rate = hbus_clk_get_rate,
+ .parent = &cpu_clk,
+};
+
+static struct clk xbus_clk = {
+ .get_rate = xbus_clk_get_rate,
+ .set_rate = xbus_clk_set_rate,
+ .parent = &ref_xtal_clk,
+};
+
+static struct clk rtc_clk = {
+ .get_rate = rtc_clk_get_rate,
+ .parent = &ref_xtal_clk,
+};
+
+/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
+static struct clk usb_clk = {
+ .enable_reg = DIGCTRL_BASE_ADDR,
+ .enable_shift = 2,
+ .enable = _raw_clk_enable,
+ .disable = _raw_clk_disable,
+ .parent = &pll_clk,
+};
+
+#define _DEFINE_CLOCK(name, er, es, p) \
+ static struct clk name = { \
+ .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \
+ .enable_shift = BP_CLKCTRL_##er##_##es, \
+ .get_rate = name##_get_rate, \
+ .set_rate = name##_set_rate, \
+ .set_parent = name##_set_parent, \
+ .enable = _raw_clk_enable, \
+ .disable = _raw_clk_disable, \
+ .parent = p, \
+ }
+
+_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk)
+ _REGISTER_CLOCK("rtc", NULL, rtc_clk)
+ _REGISTER_CLOCK(NULL, "hclk", hbus_clk)
+ _REGISTER_CLOCK(NULL, "xclk", xbus_clk)
+ _REGISTER_CLOCK(NULL, "usb", usb_clk)
+ _REGISTER_CLOCK(NULL, "audio", audio_clk)
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+};
+
+static int clk_misc_init(void)
+{
+ u32 reg;
+ int i;
+
+ /* Fix up parent per register setting */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
+ cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
+ &ref_xtal_clk : &ref_cpu_clk;
+ emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
+ &ref_xtal_clk : &ref_emi_clk;
+ ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ?
+ &ref_xtal_clk : &ref_io_clk;
+ gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
+ &ref_xtal_clk : &ref_io_clk;
+ lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ?
+ &ref_xtal_clk : &ref_pix_clk;
+
+ /* Use int div over frac when both are available */
+ __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
+ __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
+ __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
+ reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
+ reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
+ reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
+ reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
+
+ /*
+ * Set safe hbus clock divider. A divider of 3 ensure that
+ * the Vddd voltage required for the cpu clock is sufficiently
+ * high for the hbus clock.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
+ reg &= BM_CLKCTRL_HBUS_DIV;
+ reg |= 3 << BP_CLKCTRL_HBUS_DIV;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
+
+ for (i = 10000; i; i--)
+ if (!(__raw_readl(CLKCTRL_BASE_ADDR +
+ HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_BUSY))
+ break;
+ if (!i) {
+ pr_err("%s: divider writing timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ /* Gate off cpu clock in WFI for power saving */
+ __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
+
+ return 0;
+}
+
+int __init mx23_clocks_init(void)
+{
+ clk_misc_init();
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0);
+
+ return 0;
+}
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
new file mode 100644
index 0000000..74e2103
--- /dev/null
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -0,0 +1,734 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/mx28.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "regs-clkctrl-mx28.h"
+
+#define CLKCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+#define DIGCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+
+#define PARENT_RATE_SHIFT 8
+
+static struct clk pll2_clk;
+static struct clk cpu_clk;
+static struct clk emi_clk;
+static struct clk saif0_clk;
+static struct clk saif1_clk;
+static struct clk clk32k_clk;
+
+static int _raw_clk_enable(struct clk *clk)
+{
+ u32 reg;
+
+ if (clk->enable_reg) {
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+ }
+
+ return 0;
+}
+
+static void _raw_clk_disable(struct clk *clk)
+{
+ u32 reg;
+
+ if (clk->enable_reg) {
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+ }
+}
+
+/*
+ * ref_xtal_clk
+ */
+static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
+{
+ return 24000000;
+}
+
+static struct clk ref_xtal_clk = {
+ .get_rate = ref_xtal_clk_get_rate,
+};
+
+/*
+ * pll_clk
+ */
+static unsigned long pll0_clk_get_rate(struct clk *clk)
+{
+ return 480000000;
+}
+
+static unsigned long pll1_clk_get_rate(struct clk *clk)
+{
+ return 480000000;
+}
+
+static unsigned long pll2_clk_get_rate(struct clk *clk)
+{
+ return 50000000;
+}
+
+#define _CLK_ENABLE_PLL(name, r, g) \
+static int name##_enable(struct clk *clk) \
+{ \
+ __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \
+ udelay(10); \
+ \
+ if (clk == &pll2_clk) \
+ __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \
+ else \
+ __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \
+ \
+ return 0; \
+}
+
+_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
+_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
+_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE)
+
+#define _CLK_DISABLE_PLL(name, r, g) \
+static void name##_disable(struct clk *clk) \
+{ \
+ __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \
+ \
+ if (clk == &pll2_clk) \
+ __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \
+ else \
+ __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \
+ \
+}
+
+_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
+_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
+_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE)
+
+#define _DEFINE_CLOCK_PLL(name) \
+ static struct clk name = { \
+ .get_rate = name##_get_rate, \
+ .enable = name##_enable, \
+ .disable = name##_disable, \
+ .parent = &ref_xtal_clk, \
+ }
+
+_DEFINE_CLOCK_PLL(pll0_clk);
+_DEFINE_CLOCK_PLL(pll1_clk);
+_DEFINE_CLOCK_PLL(pll2_clk);
+
+/*
+ * ref_clk
+ */
+#define _CLK_GET_RATE_REF(name, sr, ss) \
+static unsigned long name##_get_rate(struct clk *clk) \
+{ \
+ unsigned long parent_rate; \
+ u32 reg, div; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \
+ div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \
+ parent_rate = clk_get_rate(clk->parent); \
+ \
+ return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \
+ div, PARENT_RATE_SHIFT); \
+}
+
+_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU)
+_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI)
+_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0)
+_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1)
+_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX)
+_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI)
+
+#define _DEFINE_CLOCK_REF(name, er, es) \
+ static struct clk name = { \
+ .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \
+ .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \
+ .get_rate = name##_get_rate, \
+ .enable = _raw_clk_enable, \
+ .disable = _raw_clk_disable, \
+ .parent = &pll0_clk, \
+ }
+
+_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU);
+_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI);
+_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0);
+_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1);
+_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX);
+_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI);
+
+/*
+ * General clocks
+ *
+ * clk_get_rate
+ */
+static unsigned long lradc_clk_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 16;
+}
+
+static unsigned long rtc_clk_get_rate(struct clk *clk)
+{
+ /* ref_xtal_clk is implemented as the only parent */
+ return clk_get_rate(clk->parent) / 768;
+}
+
+static unsigned long clk32k_clk_get_rate(struct clk *clk)
+{
+ return clk->parent->get_rate(clk->parent) / 750;
+}
+
+static unsigned long spdif_clk_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 4;
+}
+
+#define _CLK_GET_RATE(name, rs) \
+static unsigned long name##_get_rate(struct clk *clk) \
+{ \
+ u32 reg, div; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
+ \
+ if (clk->parent == &ref_xtal_clk) \
+ div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \
+ BP_CLKCTRL_##rs##_DIV_XTAL; \
+ else \
+ div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \
+ BP_CLKCTRL_##rs##_DIV_##rs; \
+ \
+ if (!div) \
+ return -EINVAL; \
+ \
+ return clk_get_rate(clk->parent) / div; \
+}
+
+_CLK_GET_RATE(cpu_clk, CPU)
+_CLK_GET_RATE(emi_clk, EMI)
+
+#define _CLK_GET_RATE1(name, rs) \
+static unsigned long name##_get_rate(struct clk *clk) \
+{ \
+ u32 reg, div; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
+ div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \
+ \
+ if (!div) \
+ return -EINVAL; \
+ \
+ if (clk == &saif0_clk || clk == &saif1_clk) \
+ return clk_get_rate(clk->parent) >> 16 * div; \
+ else \
+ return clk_get_rate(clk->parent) / div; \
+}
+
+_CLK_GET_RATE1(hbus_clk, HBUS)
+_CLK_GET_RATE1(xbus_clk, XBUS)
+_CLK_GET_RATE1(ssp0_clk, SSP0)
+_CLK_GET_RATE1(ssp1_clk, SSP1)
+_CLK_GET_RATE1(ssp2_clk, SSP2)
+_CLK_GET_RATE1(ssp3_clk, SSP3)
+_CLK_GET_RATE1(gpmi_clk, GPMI)
+_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF)
+_CLK_GET_RATE1(saif0_clk, SAIF0)
+_CLK_GET_RATE1(saif1_clk, SAIF1)
+
+#define _CLK_GET_RATE_STUB(name) \
+static unsigned long name##_get_rate(struct clk *clk) \
+{ \
+ return clk_get_rate(clk->parent); \
+}
+
+_CLK_GET_RATE_STUB(uart_clk)
+_CLK_GET_RATE_STUB(pwm_clk)
+_CLK_GET_RATE_STUB(can0_clk)
+_CLK_GET_RATE_STUB(can1_clk)
+_CLK_GET_RATE_STUB(fec_clk)
+
+/*
+ * clk_set_rate
+ */
+/* fool compiler */
+#define BM_CLKCTRL_CPU_DIV 0
+#define BP_CLKCTRL_CPU_DIV 0
+#define BM_CLKCTRL_CPU_BUSY 0
+
+#define _CLK_SET_RATE(name, dr, fr, fs) \
+static int name##_set_rate(struct clk *clk, unsigned long rate) \
+{ \
+ u32 reg, bm_busy, div_max, d, f, div, frac; \
+ unsigned long diff, parent_rate, calc_rate; \
+ int i; \
+ \
+ parent_rate = clk_get_rate(clk->parent); \
+ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
+ bm_busy = BM_CLKCTRL_##dr##_BUSY; \
+ \
+ if (clk->parent == &ref_xtal_clk) { \
+ div = DIV_ROUND_UP(parent_rate, rate); \
+ if (clk == &cpu_clk) { \
+ div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \
+ BP_CLKCTRL_CPU_DIV_XTAL; \
+ bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL; \
+ } \
+ if (div == 0 || div > div_max) \
+ return -EINVAL; \
+ } else { \
+ rate >>= PARENT_RATE_SHIFT; \
+ parent_rate >>= PARENT_RATE_SHIFT; \
+ diff = parent_rate; \
+ div = frac = 1; \
+ if (clk == &cpu_clk) { \
+ div_max = BM_CLKCTRL_CPU_DIV_CPU >> \
+ BP_CLKCTRL_CPU_DIV_CPU; \
+ bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU; \
+ } \
+ for (d = 1; d <= div_max; d++) { \
+ f = parent_rate * 18 / d / rate; \
+ if ((parent_rate * 18 / d) % rate) \
+ f++; \
+ if (f < 18 || f > 35) \
+ continue; \
+ \
+ calc_rate = parent_rate * 18 / f / d; \
+ if (calc_rate > rate) \
+ continue; \
+ \
+ if (rate - calc_rate < diff) { \
+ frac = f; \
+ div = d; \
+ diff = rate - calc_rate; \
+ } \
+ \
+ if (diff == 0) \
+ break; \
+ } \
+ \
+ if (diff == parent_rate) \
+ return -EINVAL; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
+ reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \
+ reg |= frac; \
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
+ } \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
+ if (clk == &cpu_clk) { \
+ reg &= ~BM_CLKCTRL_CPU_DIV_CPU; \
+ reg |= div << BP_CLKCTRL_CPU_DIV_CPU; \
+ } else { \
+ reg &= ~BM_CLKCTRL_##dr##_DIV; \
+ reg |= div << BP_CLKCTRL_##dr##_DIV; \
+ if (reg | (1 << clk->enable_shift)) { \
+ pr_err("%s: clock is gated\n", __func__); \
+ return -EINVAL; \
+ } \
+ } \
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \
+ \
+ for (i = 10000; i; i--) \
+ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \
+ HW_CLKCTRL_##dr) & bm_busy)) \
+ break; \
+ if (!i) { \
+ pr_err("%s: divider writing timeout\n", __func__); \
+ return -ETIMEDOUT; \
+ } \
+ \
+ return 0; \
+}
+
+_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
+_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0)
+_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0)
+_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1)
+_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1)
+_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX)
+_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI)
+
+#define _CLK_SET_RATE1(name, dr) \
+static int name##_set_rate(struct clk *clk, unsigned long rate) \
+{ \
+ u32 reg, div_max, div; \
+ unsigned long parent_rate; \
+ int i; \
+ \
+ parent_rate = clk_get_rate(clk->parent); \
+ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
+ \
+ div = DIV_ROUND_UP(parent_rate, rate); \
+ if (div == 0 || div > div_max) \
+ return -EINVAL; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
+ reg &= ~BM_CLKCTRL_##dr##_DIV; \
+ reg |= div << BP_CLKCTRL_##dr##_DIV; \
+ if (reg | (1 << clk->enable_shift)) { \
+ pr_err("%s: clock is gated\n", __func__); \
+ return -EINVAL; \
+ } \
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
+ \
+ for (i = 10000; i; i--) \
+ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \
+ HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \
+ break; \
+ if (!i) { \
+ pr_err("%s: divider writing timeout\n", __func__); \
+ return -ETIMEDOUT; \
+ } \
+ \
+ return 0; \
+}
+
+_CLK_SET_RATE1(xbus_clk, XBUS)
+
+/* saif clock uses 16 bits frac div */
+#define _CLK_SET_RATE_SAIF(name, rs) \
+static int name##_set_rate(struct clk *clk, unsigned long rate) \
+{ \
+ u16 div; \
+ u32 reg; \
+ u64 lrate; \
+ unsigned long parent_rate; \
+ int i; \
+ \
+ parent_rate = clk_get_rate(clk->parent); \
+ if (rate > parent_rate) \
+ return -EINVAL; \
+ \
+ lrate = (u64)rate << 16; \
+ do_div(lrate, parent_rate); \
+ div = (u16)lrate; \
+ \
+ if (!div) \
+ return -EINVAL; \
+ \
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
+ reg &= ~BM_CLKCTRL_##rs##_DIV; \
+ reg |= div << BP_CLKCTRL_##rs##_DIV; \
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
+ \
+ for (i = 10000; i; i--) \
+ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \
+ HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY)) \
+ break; \
+ if (!i) { \
+ pr_err("%s: divider writing timeout\n", __func__); \
+ return -ETIMEDOUT; \
+ } \
+ \
+ return 0; \
+}
+
+_CLK_SET_RATE_SAIF(saif0_clk, SAIF0)
+_CLK_SET_RATE_SAIF(saif1_clk, SAIF1)
+
+#define _CLK_SET_RATE_STUB(name) \
+static int name##_set_rate(struct clk *clk, unsigned long rate) \
+{ \
+ return -EINVAL; \
+}
+
+_CLK_SET_RATE_STUB(emi_clk)
+_CLK_SET_RATE_STUB(uart_clk)
+_CLK_SET_RATE_STUB(pwm_clk)
+_CLK_SET_RATE_STUB(spdif_clk)
+_CLK_SET_RATE_STUB(clk32k_clk)
+_CLK_SET_RATE_STUB(can0_clk)
+_CLK_SET_RATE_STUB(can1_clk)
+_CLK_SET_RATE_STUB(fec_clk)
+
+/*
+ * clk_set_parent
+ */
+#define _CLK_SET_PARENT(name, bit) \
+static int name##_set_parent(struct clk *clk, struct clk *parent) \
+{ \
+ if (parent != clk->parent) { \
+ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \
+ HW_CLKCTRL_CLKSEQ_TOG); \
+ clk->parent = parent; \
+ } \
+ \
+ return 0; \
+}
+
+_CLK_SET_PARENT(cpu_clk, CPU)
+_CLK_SET_PARENT(emi_clk, EMI)
+_CLK_SET_PARENT(ssp0_clk, SSP0)
+_CLK_SET_PARENT(ssp1_clk, SSP1)
+_CLK_SET_PARENT(ssp2_clk, SSP2)
+_CLK_SET_PARENT(ssp3_clk, SSP3)
+_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF)
+_CLK_SET_PARENT(gpmi_clk, GPMI)
+_CLK_SET_PARENT(saif0_clk, SAIF0)
+_CLK_SET_PARENT(saif1_clk, SAIF1)
+
+#define _CLK_SET_PARENT_STUB(name) \
+static int name##_set_parent(struct clk *clk, struct clk *parent) \
+{ \
+ if (parent != clk->parent) \
+ return -EINVAL; \
+ else \
+ return 0; \
+}
+
+_CLK_SET_PARENT_STUB(pwm_clk)
+_CLK_SET_PARENT_STUB(uart_clk)
+_CLK_SET_PARENT_STUB(clk32k_clk)
+_CLK_SET_PARENT_STUB(spdif_clk)
+_CLK_SET_PARENT_STUB(fec_clk)
+_CLK_SET_PARENT_STUB(can0_clk)
+_CLK_SET_PARENT_STUB(can1_clk)
+
+/*
+ * clk definition
+ */
+static struct clk cpu_clk = {
+ .get_rate = cpu_clk_get_rate,
+ .set_rate = cpu_clk_set_rate,
+ .set_parent = cpu_clk_set_parent,
+ .parent = &ref_cpu_clk,
+};
+
+static struct clk hbus_clk = {
+ .get_rate = hbus_clk_get_rate,
+ .parent = &cpu_clk,
+};
+
+static struct clk xbus_clk = {
+ .get_rate = xbus_clk_get_rate,
+ .set_rate = xbus_clk_set_rate,
+ .parent = &ref_xtal_clk,
+};
+
+static struct clk lradc_clk = {
+ .get_rate = lradc_clk_get_rate,
+ .parent = &clk32k_clk,
+};
+
+static struct clk rtc_clk = {
+ .get_rate = rtc_clk_get_rate,
+ .parent = &ref_xtal_clk,
+};
+
+/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
+static struct clk usb0_clk = {
+ .enable_reg = DIGCTRL_BASE_ADDR,
+ .enable_shift = 2,
+ .enable = _raw_clk_enable,
+ .disable = _raw_clk_disable,
+ .parent = &pll0_clk,
+};
+
+static struct clk usb1_clk = {
+ .enable_reg = DIGCTRL_BASE_ADDR,
+ .enable_shift = 16,
+ .enable = _raw_clk_enable,
+ .disable = _raw_clk_disable,
+ .parent = &pll1_clk,
+};
+
+#define _DEFINE_CLOCK(name, er, es, p) \
+ static struct clk name = { \
+ .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \
+ .enable_shift = BP_CLKCTRL_##er##_##es, \
+ .get_rate = name##_get_rate, \
+ .set_rate = name##_set_rate, \
+ .set_parent = name##_set_parent, \
+ .enable = _raw_clk_enable, \
+ .disable = _raw_clk_disable, \
+ .parent = p, \
+ }
+
+_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp0_clk, SSP0, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp1_clk, SSP1, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp2_clk, SSP2, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp3_clk, SSP3, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(lcdif_clk, DIS_LCDIF, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(saif0_clk, SAIF0, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(saif1_clk, SAIF1, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(can0_clk, FLEXCAN, STOP_CAN0, &ref_xtal_clk);
+_DEFINE_CLOCK(can1_clk, FLEXCAN, STOP_CAN1, &ref_xtal_clk);
+_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(spdif_clk, SPDIF, CLKGATE, &pll0_clk);
+_DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("rtc", NULL, rtc_clk)
+ _REGISTER_CLOCK("pll2", NULL, pll2_clk)
+ _REGISTER_CLOCK(NULL, "hclk", hbus_clk)
+ _REGISTER_CLOCK(NULL, "xclk", xbus_clk)
+ _REGISTER_CLOCK(NULL, "can0", can0_clk)
+ _REGISTER_CLOCK(NULL, "can1", can1_clk)
+ _REGISTER_CLOCK(NULL, "usb0", usb0_clk)
+ _REGISTER_CLOCK(NULL, "usb1", usb1_clk)
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+ _REGISTER_CLOCK(NULL, "lradc", lradc_clk)
+ _REGISTER_CLOCK(NULL, "spdif", spdif_clk)
+};
+
+static int clk_misc_init(void)
+{
+ u32 reg;
+ int i;
+
+ /* Fix up parent per register setting */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
+ cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
+ &ref_xtal_clk : &ref_cpu_clk;
+ emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
+ &ref_xtal_clk : &ref_emi_clk;
+ ssp0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP0) ?
+ &ref_xtal_clk : &ref_io0_clk;
+ ssp1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP1) ?
+ &ref_xtal_clk : &ref_io0_clk;
+ ssp2_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP2) ?
+ &ref_xtal_clk : &ref_io1_clk;
+ ssp3_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP3) ?
+ &ref_xtal_clk : &ref_io1_clk;
+ lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF) ?
+ &ref_xtal_clk : &ref_pix_clk;
+ gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
+ &ref_xtal_clk : &ref_gpmi_clk;
+ saif0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0) ?
+ &ref_xtal_clk : &pll0_clk;
+ saif1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1) ?
+ &ref_xtal_clk : &pll0_clk;
+
+ /* Use int div over frac when both are available */
+ __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
+ __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
+ __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
+ reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
+ reg &= ~BM_CLKCTRL_SSP0_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
+ reg &= ~BM_CLKCTRL_SSP1_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
+ reg &= ~BM_CLKCTRL_SSP2_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
+ reg &= ~BM_CLKCTRL_SSP3_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
+ reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
+ reg &= ~BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
+
+ /* SAIF has to use frac div for functional operation */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
+ reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
+
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
+ reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
+
+ /*
+ * Set safe hbus clock divider. A divider of 3 ensure that
+ * the Vddd voltage required for the cpu clock is sufficiently
+ * high for the hbus clock.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
+ reg &= BM_CLKCTRL_HBUS_DIV;
+ reg |= 3 << BP_CLKCTRL_HBUS_DIV;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
+
+ for (i = 10000; i; i--)
+ if (!(__raw_readl(CLKCTRL_BASE_ADDR +
+ HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY))
+ break;
+ if (!i) {
+ pr_err("%s: divider writing timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ /* Gate off cpu clock in WFI for power saving */
+ __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
+
+ /* Extra fec clock setting */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ reg &= ~BM_CLKCTRL_ENET_SLEEP;
+ reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+
+ return 0;
+}
+
+int __init mx28_clocks_init(void)
+{
+ clk_misc_init();
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
+
+ return 0;
+}
diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c
new file mode 100644
index 0000000..e7d2269
--- /dev/null
+++ b/arch/arm/mach-mxs/clock.c
@@ -0,0 +1,200 @@
+/*
+ * Based on arch/arm/plat-omap/clock.c
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/* #define DEBUG */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/semaphore.h>
+#include <linux/string.h>
+
+#include <mach/clock.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in include/linux/clk.h
+ *-------------------------------------------------------------------------*/
+
+static void __clk_disable(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+ WARN_ON(!clk->usecount);
+
+ if (!(--clk->usecount)) {
+ if (clk->disable)
+ clk->disable(clk);
+ __clk_disable(clk->parent);
+ __clk_disable(clk->secondary);
+ }
+}
+
+static int __clk_enable(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ if (clk->usecount++ == 0) {
+ __clk_enable(clk->parent);
+ __clk_enable(clk->secondary);
+
+ if (clk->enable)
+ clk->enable(clk);
+ }
+ return 0;
+}
+
+/* This function increments the reference count on the clock and enables the
+ * clock if not already enabled. The parent clock tree is recursively enabled
+ */
+int clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ ret = __clk_enable(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* This function decrements the reference count on the clock and disables
+ * the clock when reference count is 0. The parent clock tree is
+ * recursively disabled
+ */
+void clk_disable(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ __clk_disable(clk);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Retrieve the *current* clock rate. If the clock itself
+ * does not provide a special calculation routine, ask
+ * its parent and so on, until one is able to return
+ * a valid clock rate
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return 0UL;
+
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
+ return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* Round the requested clock rate to the nearest supported
+ * rate that is less than or equal to the requested rate.
+ * This is dependent on the clock's current parent.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
+ return 0;
+
+ return clk->round_rate(clk, rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/* Set the clock to the requested clock rate. The rate must
+ * match a supported rate exactly based on what clk_round_rate returns
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
+ return ret;
+
+ mutex_lock(&clocks_mutex);
+ ret = clk->set_rate(clk, rate);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* Set the clock's parent to another clock source */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -EINVAL;
+ struct clk *old;
+
+ if (clk == NULL || IS_ERR(clk) || parent == NULL ||
+ IS_ERR(parent) || clk->set_parent == NULL)
+ return ret;
+
+ if (clk->usecount)
+ clk_enable(parent);
+
+ mutex_lock(&clocks_mutex);
+ ret = clk->set_parent(clk, parent);
+ if (ret == 0) {
+ old = clk->parent;
+ clk->parent = parent;
+ } else {
+ old = parent;
+ }
+ mutex_unlock(&clocks_mutex);
+
+ if (clk->usecount)
+ clk_disable(old);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* Retrieve the clock's parent clock source */
+struct clk *clk_get_parent(struct clk *clk)
+{
+ struct clk *ret = NULL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
new file mode 100644
index 0000000..d0f49fc
--- /dev/null
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx23.h>
+#include <mach/devices-common.h>
+
+extern const struct mxs_duart_data mx23_duart_data __initconst;
+#define mx23_add_duart() \
+ mxs_add_duart(&mx23_duart_data)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
new file mode 100644
index 0000000..00b736c
--- /dev/null
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+extern const struct mxs_duart_data mx28_duart_data __initconst;
+#define mx28_add_duart() \
+ mxs_add_duart(&mx28_duart_data)
+
+extern const struct mxs_fec_data mx28_fec_data[] __initconst;
+#define mx28_add_fec(id, pdata) \
+ mxs_add_fec(&mx28_fec_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
new file mode 100644
index 0000000..6b60f02
--- /dev/null
+++ b/arch/arm/mach-mxs/devices.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+
+struct platform_device *__init mxs_add_platform_device_dmamask(
+ const char *name, int id,
+ const struct resource *res, unsigned int num_resources,
+ const void *data, size_t size_data, u64 dmamask)
+{
+ int ret = -ENOMEM;
+ struct platform_device *pdev;
+
+ pdev = platform_device_alloc(name, id);
+ if (!pdev)
+ goto err;
+
+ if (dmamask) {
+ /*
+ * This memory isn't freed when the device is put,
+ * I don't have a nice idea for that though. Conceptually
+ * dma_mask in struct device should not be a pointer.
+ * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
+ */
+ pdev->dev.dma_mask =
+ kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+ if (!pdev->dev.dma_mask)
+ /* ret is still -ENOMEM; */
+ goto err;
+
+ *pdev->dev.dma_mask = dmamask;
+ pdev->dev.coherent_dma_mask = dmamask;
+ }
+
+ if (res) {
+ ret = platform_device_add_resources(pdev, res, num_resources);
+ if (ret)
+ goto err;
+ }
+
+ if (data) {
+ ret = platform_device_add_data(pdev, data, size_data);
+ if (ret)
+ goto err;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+err:
+ platform_device_put(pdev);
+ return ERR_PTR(ret);
+ }
+
+ return pdev;
+}
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
new file mode 100644
index 0000000..a35a2dc
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -0,0 +1,5 @@
+config MXS_HAVE_PLATFORM_DUART
+ bool
+
+config MXS_HAVE_PLATFORM_FEC
+ bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
new file mode 100644
index 0000000..4b5266a
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
diff --git a/arch/arm/mach-mxs/devices/platform-duart.c b/arch/arm/mach-mxs/devices/platform-duart.c
new file mode 100644
index 0000000..2fe0df5
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-duart.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_duart_data_entry(soc) \
+ { \
+ .iobase = soc ## _DUART_BASE_ADDR, \
+ .irq = soc ## _INT_DUART, \
+ }
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_duart_data mx23_duart_data __initconst =
+ mxs_duart_data_entry(MX23);
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_duart_data mx28_duart_data __initconst =
+ mxs_duart_data_entry(MX28);
+#endif
+
+struct platform_device *__init mxs_add_duart(
+ const struct mxs_duart_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res),
+ NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c
new file mode 100644
index 0000000..c08168c
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-fec.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_fec_data_entry_single(soc, _id) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR, \
+ .irq = soc ## _INT_ENET_MAC ## _id, \
+ }
+
+#define mxs_fec_data_entry(soc, _id) \
+ [_id] = mxs_fec_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_fec_data mx28_fec_data[] __initconst = {
+#define mx28_fec_data_entry(_id) \
+ mxs_fec_data_entry(MX28, _id)
+ mx28_fec_data_entry(0),
+ mx28_fec_data_entry(1),
+};
+#endif
+
+struct platform_device *__init mxs_add_fec(
+ const struct mxs_fec_data *data,
+ const struct fec_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("fec", data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
new file mode 100644
index 0000000..d7ad7a6
--- /dev/null
+++ b/arch/arm/mach-mxs/gpio.c
@@ -0,0 +1,325 @@
+/*
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * Based on code from Freescale,
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <asm-generic/bug.h>
+
+#include "gpio.h"
+
+static struct mxs_gpio_port *mxs_gpio_ports;
+static int gpio_table_size;
+
+#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
+#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
+#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
+#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
+#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
+#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
+#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
+#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
+
+#define GPIO_INT_FALL_EDGE 0x0
+#define GPIO_INT_LOW_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_HIGH_LEV 0x3
+#define GPIO_INT_LEV_MASK (1 << 0)
+#define GPIO_INT_POL_MASK (1 << 1)
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
+{
+ __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id));
+}
+
+static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
+ int enable)
+{
+ if (enable) {
+ __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id));
+ __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id));
+ } else {
+ __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id));
+ }
+}
+
+static void mxs_gpio_ack_irq(u32 irq)
+{
+ u32 gpio = irq_to_gpio(irq);
+ clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
+}
+
+static void mxs_gpio_mask_irq(u32 irq)
+{
+ u32 gpio = irq_to_gpio(irq);
+ set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
+}
+
+static void mxs_gpio_unmask_irq(u32 irq)
+{
+ u32 gpio = irq_to_gpio(irq);
+ set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
+}
+
+static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
+
+static int mxs_gpio_set_irq_type(u32 irq, u32 type)
+{
+ u32 gpio = irq_to_gpio(irq);
+ u32 pin_mask = 1 << (gpio & 31);
+ struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
+ void __iomem *pin_addr;
+ int edge;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ edge = GPIO_INT_RISE_EDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ edge = GPIO_INT_FALL_EDGE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ edge = GPIO_INT_LOW_LEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ edge = GPIO_INT_HIGH_LEV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set level or edge */
+ pin_addr = port->base + PINCTRL_IRQLEV(port->id);
+ if (edge & GPIO_INT_LEV_MASK)
+ __mxs_setl(pin_mask, pin_addr);
+ else
+ __mxs_clrl(pin_mask, pin_addr);
+
+ /* set polarity */
+ pin_addr = port->base + PINCTRL_IRQPOL(port->id);
+ if (edge & GPIO_INT_POL_MASK)
+ __mxs_setl(pin_mask, pin_addr);
+ else
+ __mxs_clrl(pin_mask, pin_addr);
+
+ clear_gpio_irqstatus(port, gpio & 0x1f);
+
+ return 0;
+}
+
+/* MXS has one interrupt *per* gpio port */
+static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 irq_stat;
+ struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq);
+ u32 gpio_irq_no_base = port->virtual_irq_start;
+
+ irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
+ __raw_readl(port->base + PINCTRL_IRQEN(port->id));
+
+ while (irq_stat != 0) {
+ int irqoffset = fls(irq_stat) - 1;
+ generic_handle_irq(gpio_irq_no_base + irqoffset);
+ irq_stat &= ~(1 << irqoffset);
+ }
+}
+
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param irq interrupt source number
+ * @param enable enable as wake-up if equal to non-zero
+ * @return This function returns 0 on success.
+ */
+static int mxs_gpio_set_wake_irq(u32 irq, u32 enable)
+{
+ u32 gpio = irq_to_gpio(irq);
+ u32 gpio_idx = gpio & 0x1f;
+ struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
+
+ if (enable) {
+ if (port->irq_high && (gpio_idx >= 16))
+ enable_irq_wake(port->irq_high);
+ else
+ enable_irq_wake(port->irq);
+ } else {
+ if (port->irq_high && (gpio_idx >= 16))
+ disable_irq_wake(port->irq_high);
+ else
+ disable_irq_wake(port->irq);
+ }
+
+ return 0;
+}
+
+static struct irq_chip gpio_irq_chip = {
+ .ack = mxs_gpio_ack_irq,
+ .mask = mxs_gpio_mask_irq,
+ .unmask = mxs_gpio_unmask_irq,
+ .set_type = mxs_gpio_set_irq_type,
+ .set_wake = mxs_gpio_set_wake_irq,
+};
+
+static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+ int dir)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+ void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
+
+ if (dir)
+ __mxs_setl(1 << offset, pin_addr);
+ else
+ __mxs_clrl(1 << offset, pin_addr);
+}
+
+static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+
+ return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
+}
+
+static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+ void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
+
+ if (value)
+ __mxs_setl(1 << offset, pin_addr);
+ else
+ __mxs_clrl(1 << offset, pin_addr);
+}
+
+static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+
+ return port->virtual_irq_start + offset;
+}
+
+static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ mxs_set_gpio_direction(chip, offset, 0);
+ return 0;
+}
+
+static int mxs_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ mxs_gpio_set(chip, offset, value);
+ mxs_set_gpio_direction(chip, offset, 1);
+ return 0;
+}
+
+int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
+{
+ int i, j;
+
+ /* save for local usage */
+ mxs_gpio_ports = port;
+ gpio_table_size = cnt;
+
+ pr_info("MXS GPIO hardware\n");
+
+ for (i = 0; i < cnt; i++) {
+ /* disable the interrupt and clear the status */
+ __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i));
+ __raw_writel(0, port[i].base + PINCTRL_IRQEN(i));
+
+ /* clear address has to be used to clear IRQSTAT bits */
+ __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i));
+
+ for (j = port[i].virtual_irq_start;
+ j < port[i].virtual_irq_start + 32; j++) {
+ set_irq_chip(j, &gpio_irq_chip);
+ set_irq_handler(j, handle_level_irq);
+ set_irq_flags(j, IRQF_VALID);
+ }
+
+ /* setup one handler for each entry */
+ set_irq_chained_handler(port[i].irq, mxs_gpio_irq_handler);
+ set_irq_data(port[i].irq, &port[i]);
+
+ /* register gpio chip */
+ port[i].chip.direction_input = mxs_gpio_direction_input;
+ port[i].chip.direction_output = mxs_gpio_direction_output;
+ port[i].chip.get = mxs_gpio_get;
+ port[i].chip.set = mxs_gpio_set;
+ port[i].chip.to_irq = mxs_gpio_to_irq;
+ port[i].chip.base = i * 32;
+ port[i].chip.ngpio = 32;
+
+ /* its a serious configuration bug when it fails */
+ BUG_ON(gpiochip_add(&port[i].chip) < 0);
+ }
+
+ return 0;
+}
+
+#define DEFINE_MXS_GPIO_PORT(soc, _id) \
+ { \
+ .chip.label = "gpio-" #_id, \
+ .id = _id, \
+ .irq = soc ## _INT_GPIO ## _id, \
+ .base = soc ## _IO_ADDRESS( \
+ soc ## _PINCTRL ## _BASE_ADDR), \
+ .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \
+ }
+
+#define DEFINE_REGISTER_FUNCTION(prefix) \
+int __init prefix ## _register_gpios(void) \
+{ \
+ return mxs_gpio_init(prefix ## _gpio_ports, \
+ ARRAY_SIZE(prefix ## _gpio_ports)); \
+}
+
+#ifdef CONFIG_SOC_IMX23
+static struct mxs_gpio_port mx23_gpio_ports[] = {
+ DEFINE_MXS_GPIO_PORT(MX23, 0),
+ DEFINE_MXS_GPIO_PORT(MX23, 1),
+ DEFINE_MXS_GPIO_PORT(MX23, 2),
+};
+DEFINE_REGISTER_FUNCTION(mx23)
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+static struct mxs_gpio_port mx28_gpio_ports[] = {
+ DEFINE_MXS_GPIO_PORT(MX28, 0),
+ DEFINE_MXS_GPIO_PORT(MX28, 1),
+ DEFINE_MXS_GPIO_PORT(MX28, 2),
+ DEFINE_MXS_GPIO_PORT(MX28, 3),
+ DEFINE_MXS_GPIO_PORT(MX28, 4),
+};
+DEFINE_REGISTER_FUNCTION(mx28)
+#endif
diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h
new file mode 100644
index 0000000..005bb06
--- /dev/null
+++ b/arch/arm/mach-mxs/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MXS_GPIO_H__
+#define __MXS_GPIO_H__
+
+struct mxs_gpio_port {
+ void __iomem *base;
+ int id;
+ int irq;
+ int irq_high;
+ int virtual_irq_start;
+ struct gpio_chip chip;
+};
+
+int mxs_gpio_init(struct mxs_gpio_port*, int);
+
+#endif /* __MXS_GPIO_H__ */
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
new file mode 100644
index 0000000..5dd43ba
--- /dev/null
+++ b/arch/arm/mach-mxs/icoll.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/mxs.h>
+#include <mach/common.h>
+
+#define HW_ICOLL_VECTOR 0x0000
+#define HW_ICOLL_LEVELACK 0x0010
+#define HW_ICOLL_CTRL 0x0020
+#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10)
+#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10)
+#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
+#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1
+
+static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
+
+static void icoll_ack_irq(unsigned int irq)
+{
+ /*
+ * The Interrupt Collector is able to prioritize irqs.
+ * Currently only level 0 is used. So acking can use
+ * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
+ */
+ __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
+ icoll_base + HW_ICOLL_LEVELACK);
+}
+
+static void icoll_mask_irq(unsigned int irq)
+{
+ __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+ icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq));
+}
+
+static void icoll_unmask_irq(unsigned int irq)
+{
+ __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+ icoll_base + HW_ICOLL_INTERRUPTn_SET(irq));
+}
+
+static struct irq_chip mxs_icoll_chip = {
+ .ack = icoll_ack_irq,
+ .mask = icoll_mask_irq,
+ .unmask = icoll_unmask_irq,
+};
+
+void __init icoll_init_irq(void)
+{
+ int i;
+
+ /*
+ * Interrupt Collector reset, which initializes the priority
+ * for each irq to level 0.
+ */
+ mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
+
+ for (i = 0; i < MXS_INTERNAL_IRQS; i++) {
+ set_irq_chip(i, &mxs_icoll_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-mxs/include/mach/clkdev.h b/arch/arm/mach-mxs/include/mach/clkdev.h
new file mode 100644
index 0000000..3a8f2e3
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_MXS_CLKDEV_H__
+#define __MACH_MXS_CLKDEV_H__
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h
new file mode 100644
index 0000000..041e276
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/clock.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_CLOCK_H__
+#define __MACH_MXS_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/list.h>
+
+struct module;
+
+struct clk {
+ int id;
+ /* Source clock this clk depends on */
+ struct clk *parent;
+ /* Secondary clock to enable/disable with this clock */
+ struct clk *secondary;
+ /* Reference count of clock enable/disable */
+ __s8 usecount;
+ /* Register bit position for clock's enable/disable control. */
+ u8 enable_shift;
+ /* Register address for clock's enable/disable control. */
+ void __iomem *enable_reg;
+ u32 flags;
+ /* get the current clock rate (always a fresh value) */
+ unsigned long (*get_rate) (struct clk *);
+ /* Function ptr to set the clock to a new rate. The rate must match a
+ supported rate returned from round_rate. Leave blank if clock is not
+ programmable */
+ int (*set_rate) (struct clk *, unsigned long);
+ /* Function ptr to round the requested clock rate to the nearest
+ supported rate that is less than or equal to the requested rate. */
+ unsigned long (*round_rate) (struct clk *, unsigned long);
+ /* Function ptr to enable the clock. Leave blank if clock can not
+ be gated. */
+ int (*enable) (struct clk *);
+ /* Function ptr to disable the clock. Leave blank if clock can not
+ be gated. */
+ void (*disable) (struct clk *);
+ /* Function ptr to set the parent clock of the clock. */
+ int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __MACH_MXS_CLOCK_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
new file mode 100644
index 0000000..59133eb
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_COMMON_H__
+#define __MACH_MXS_COMMON_H__
+
+struct clk;
+
+extern int mxs_reset_block(void __iomem *);
+extern void mxs_timer_init(struct clk *, int);
+
+extern int mx23_register_gpios(void);
+extern int mx23_clocks_init(void);
+extern void mx23_map_io(void);
+extern void mx23_init_irq(void);
+
+extern int mx28_register_gpios(void);
+extern int mx28_clocks_init(void);
+extern void mx28_map_io(void);
+extern void mx28_init_irq(void);
+
+extern void icoll_init_irq(void);
+
+#endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
new file mode 100644
index 0000000..79650a1
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-mxs/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+
+#ifdef CONFIG_SOC_IMX23
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#define UART_PADDR MX23_DUART_BASE_ADDR
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#define UART_PADDR MX28_DUART_BASE_ADDR
+#endif
+
+#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR)
+
+ .macro addruart, rp, rv
+ ldr \rp, =UART_PADDR @ physical
+ ldr \rv, =UART_VADDR @ virtual
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
new file mode 100644
index 0000000..3da48d4
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+struct platform_device *mxs_add_platform_device_dmamask(
+ const char *name, int id,
+ const struct resource *res, unsigned int num_resources,
+ const void *data, size_t size_data, u64 dmamask);
+
+static inline struct platform_device *mxs_add_platform_device(
+ const char *name, int id,
+ const struct resource *res, unsigned int num_resources,
+ const void *data, size_t size_data)
+{
+ return mxs_add_platform_device_dmamask(
+ name, id, res, num_resources, data, size_data, 0);
+}
+
+/* duart */
+struct mxs_duart_data {
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init mxs_add_duart(
+ const struct mxs_duart_data *data);
+
+/* fec */
+#include <linux/fec.h>
+struct mxs_fec_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init mxs_add_fec(
+ const struct mxs_fec_data *data,
+ const struct fec_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/mach-mxs/include/mach/entry-macro.S
new file mode 100644
index 0000000..9f0da12
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * Low-level IRQ helper macros for Freescale MXS-based
+ *
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <mach/mxs.h>
+
+#define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
+#define HW_ICOLL_STAT_OFFSET 0x70
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
+ cmp \irqnr, #0x7F
+ strne \irqnr, [\base]
+ moveqs \irqnr, #0
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =MXS_ICOLL_VBASE
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
new file mode 100644
index 0000000..828cccc
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/gpio.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_GPIO_H__
+#define __MACH_MXS_GPIO_H__
+
+#include <asm-generic/gpio.h>
+
+#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
+
+/* use gpiolib dispatchers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
+
+#endif /* __MACH_MXS_GPIO_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h
new file mode 100644
index 0000000..53e89a0
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/hardware.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_HARDWARE_H__
+#define __MACH_MXS_HARDWARE_H__
+
+#ifdef __ASSEMBLER__
+#define IOMEM(addr) (addr)
+#else
+#define IOMEM(addr) ((void __force __iomem *)(addr))
+#endif
+
+#endif /* __MACH_MXS_HARDWARE_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/io.h b/arch/arm/mach-mxs/include/mach/io.h
new file mode 100644
index 0000000..289b722
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_IO_H__
+#define __MACH_MXS_IO_H__
+
+/* Allow IO space to be anywhere in the memory */
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* io address mapping macro */
+#define __io(a) __typesafe_io(a)
+
+#define __mem_pci(a) (a)
+
+#endif /* __MACH_MXS_IO_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
new file mode 100644
index 0000000..94e5dd8
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
@@ -0,0 +1,355 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX23_H__
+#define __MACH_IOMUX_MX23_H__
+
+#include <mach/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ * BANK PIN MUX
+ */
+/* MUXSEL_0 */
+#define MX23_PAD_GPMI_D00__GPMI_D00 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D01__GPMI_D01 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D02__GPMI_D02 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D03__GPMI_D03 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D04__GPMI_D04 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D05__GPMI_D05 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D06__GPMI_D06 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D07__GPMI_D07 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D08__GPMI_D08 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D09__GPMI_D09 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D10__GPMI_D10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D11__GPMI_D11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D12__GPMI_D12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D13__GPMI_D13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D14__GPMI_D14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D15__GPMI_D15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_WPN__GPMI_WPN MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
+#define MX23_PAD_I2C_SCL__I2C_SCL MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
+#define MX23_PAD_I2C_SDA__I2C_SDA MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
+
+#define MX23_PAD_LCD_D00__LCD_D00 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D01__LCD_D01 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D02__LCD_D02 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D03__LCD_D03 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D04__LCD_D04 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D05__LCD_D05 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D06__LCD_D06 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D07__LCD_D07 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D08__LCD_D08 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D09__LCD_D09 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_WR__LCD_WR MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX23_PAD_PWM0__PWM0 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX23_PAD_PWM1__PWM1 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX23_PAD_PWM2__PWM2 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX23_PAD_PWM3__PWM3 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX23_PAD_PWM4__PWM4 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+
+#define MX23_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
+#define MX23_PAD_ROTARYA__ROTARYA MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
+#define MX23_PAD_ROTARYB__ROTARYB MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A00__EMI_A00 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A01__EMI_A01 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A02__EMI_A02 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A03__EMI_A03 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A04__EMI_A04 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A05__EMI_A05 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A06__EMI_A06 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A07__EMI_A07 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A08__EMI_A08 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A09__EMI_A09 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A10__EMI_A10 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A11__EMI_A11 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A12__EMI_A12 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
+
+#define MX23_PAD_EMI_D00__EMI_D00 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D01__EMI_D01 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D02__EMI_D02 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D03__EMI_D03 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D04__EMI_D04 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D05__EMI_D05 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D06__EMI_D06 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D07__EMI_D07 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D08__EMI_D08 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D09__EMI_D09 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D10__EMI_D10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D11__EMI_D11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D12__EMI_D12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D13__EMI_D13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D14__EMI_D14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D15__EMI_D15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CLKN__EMI_CLKN MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX23_PAD_GPMI_D00__LCD_D8 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D01__LCD_D9 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D02__LCD_D10 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D03__LCD_D11 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D04__LCD_D12 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D05__LCD_D13 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D06__LCD_D14 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D07__LCD_D15 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D08__LCD_D18 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D09__LCD_D19 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D10__LCD_D20 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D11__LCD_D21 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D12__LCD_D22 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D13__LCD_D23 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D14__AUART2_RX MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D15__AUART2_TX MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_CLE__LCD_D16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_ALE__LCD_D17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_CE2N__ATA_A2 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_RTS__IR_CLK MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_RX__IR_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_TX__IR_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
+#define MX23_PAD_I2C_SCL__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
+#define MX23_PAD_I2C_SDA__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
+
+#define MX23_PAD_LCD_D00__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D01__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D02__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D03__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D04__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D05__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D06__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D07__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D08__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D09__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D10__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D11__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D12__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D13__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D14__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D15__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_RESET__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_RS__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_ENABLE__I2C_SCL MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_HSYNC__I2C_SDA MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX23_PAD_PWM0__ROTARYA MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX23_PAD_PWM1__ROTARYB MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX23_PAD_PWM2__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX23_PAD_PWM3__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX23_PAD_PWM4__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_1)
+#define MX23_PAD_SSP1_DATA1__I2C_SCL MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_1)
+#define MX23_PAD_SSP1_DATA2__I2C_SDA MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
+#define MX23_PAD_ROTARYA__AUART2_RTS MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
+#define MX23_PAD_ROTARYB__AUART2_CTS MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX23_PAD_GPMI_D00__SSP2_DATA0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D01__SSP2_DATA1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D02__SSP2_DATA2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D03__SSP2_DATA3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D04__SSP2_DATA4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D05__SSP2_DATA5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D06__SSP2_DATA6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D07__SSP2_DATA7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D08__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D09__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D10__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D11__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D15__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_WRN__SSP2_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_RX__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_TX__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
+#define MX23_PAD_I2C_SCL__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
+#define MX23_PAD_I2C_SDA__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
+
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D11__SAIF_LRCLK MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_RESET__GPMI_CE3N MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX23_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
+#define MX23_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
+#define MX23_PAD_PWM3__AUART1_CTS MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX23_PAD_PWM4__AUART1_RTS MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX23_PAD_SSP1_CMD__JTAG_TDO MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_SCK__JTAG_TRST MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_2)
+#define MX23_PAD_ROTARYA__SPDIF MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_2)
+#define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX23_PAD_GPMI_D00__GPO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D01__GPO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D02__GPO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D03__GPO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D04__GPO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D05__GPO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D06__GPO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D07__GPO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D08__GPO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D09__GPO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D10__GPO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D11__GPO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D12__GPO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D13__GPO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D14__GPO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D15__GPO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CLE__GPO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_ALE__GPO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE2N__GPO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY0__GPO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY1__GPO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY2__GPO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY3__GPO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WPN__GPO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WRN__GPO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDN__GPO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_CTS__GPO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RTS__GPO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RX__GPO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_TX__GPO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SCL__GPO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SDA__GPO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
+
+#define MX23_PAD_LCD_D00__GPO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D01__GPO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D02__GPO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D03__GPO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D04__GPO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D05__GPO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D06__GPO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D07__GPO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D08__GPO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D09__GPO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D10__GPO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D11__GPO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D12__GPO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D13__GPO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D14__GPO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D15__GPO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D16__GPO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D17__GPO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RESET__GPO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RS__GPO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_WR__GPO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_CS__GPO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_DOTCK__GPO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_ENABLE__GPO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_HSYNC__GPO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_VSYNC__GPO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM0__GPO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM1__GPO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM2__GPO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM3__GPO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM4__GPO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+
+#define MX23_PAD_SSP1_CMD__GPO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DETECT__GPO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA0__GPO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA1__GPO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA2__GPO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA3__GPO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_SCK__GPO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYA__GPO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYB__GPO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A00__GPO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A01__GPO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A02__GPO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A03__GPO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A04__GPO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A05__GPO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A06__GPO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A07__GPO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A08__GPO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A09__GPO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A10__GPO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A11__GPO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A12__GPO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA0__GPO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA1__GPO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CASN__GPO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE0N__GPO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE1N__GPO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE1N__GPO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE0N__GPO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CKE__GPO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_RASN__GPO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_WEN__GPO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/arch/arm/mach-mxs/include/mach/iomux-mx28.h
new file mode 100644
index 0000000..f50fefd
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/iomux-mx28.h
@@ -0,0 +1,537 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX28_H__
+#define __MACH_IOMUX_MX28_H__
+
+#include <mach/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ * BANK PIN MUX
+ */
+/* MUXSEL_0 */
+#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+
+#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
+
+#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+
+#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
+#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
+#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
+
+#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+
+#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
+
+#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
+#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
+#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
+#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
+#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
+#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
+#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h
new file mode 100644
index 0000000..fe558e3
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/iomux.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_IOMUX_H__
+#define __MACH_MXS_IOMUX_H__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ *
+ * PAD_BANK: 0..2 (3)
+ * PAD_PIN: 3..7 (5)
+ * PAD_MUXSEL: 8..9 (2)
+ * PAD_MA: 10..11 (2)
+ * PAD_MA_VALID: 12 (1)
+ * PAD_VOL: 13 (1)
+ * PAD_VOL_VALID: 14 (1)
+ * PAD_PULL: 15 (1)
+ * PAD_PULL_VALID: 16 (1)
+ * RESERVED: 17..31 (15)
+ */
+typedef u32 iomux_cfg_t;
+
+#define MXS_PAD_BANK_SHIFT 0
+#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
+#define MXS_PAD_PIN_SHIFT 3
+#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
+#define MXS_PAD_MUXSEL_SHIFT 8
+#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
+#define MXS_PAD_MA_SHIFT 10
+#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
+#define MXS_PAD_MA_VALID_SHIFT 12
+#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
+#define MXS_PAD_VOL_SHIFT 13
+#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
+#define MXS_PAD_VOL_VALID_SHIFT 14
+#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
+#define MXS_PAD_PULL_SHIFT 15
+#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
+#define MXS_PAD_PULL_VALID_SHIFT 16
+#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
+
+#define PAD_MUXSEL_0 0
+#define PAD_MUXSEL_1 1
+#define PAD_MUXSEL_2 2
+#define PAD_MUXSEL_GPIO 3
+
+#define PAD_4MA 0
+#define PAD_8MA 1
+#define PAD_12MA 2
+#define PAD_16MA 3
+
+#define PAD_1V8 0
+#define PAD_3V3 1
+
+#define PAD_NOPULL 0
+#define PAD_PULLUP 1
+
+#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+
+#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
+ MXS_PAD_VOL_VALID_MASK)
+#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
+ MXS_PAD_VOL_VALID_MASK)
+
+#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
+ MXS_PAD_PULL_VALID_MASK)
+#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
+ MXS_PAD_PULL_VALID_MASK)
+
+#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \
+ (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \
+ ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \
+ ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \
+ ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \
+ ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \
+ ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
+
+/*
+ * A pad becomes naked, when none of mA, vol or pull
+ * validity bits is set.
+ */
+#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
+ MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
+
+static inline unsigned int PAD_BANK(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
+}
+
+static inline unsigned int PAD_PIN(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
+}
+
+static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
+}
+
+static inline unsigned int PAD_MA(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
+}
+
+static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_VOL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
+}
+
+static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_PULL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
+}
+
+static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
+}
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad);
+
+/*
+ * configures multiple pads
+ * convenient way to call the above function with tables
+ */
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
+
+#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/arch/arm/mach-mxs/include/mach/irqs.h b/arch/arm/mach-mxs/include/mach/irqs.h
new file mode 100644
index 0000000..f771039
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/irqs.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_IRQS_H__
+#define __MACH_MXS_IRQS_H__
+
+#define MXS_INTERNAL_IRQS 128
+
+#define MXS_GPIO_IRQ_START MXS_INTERNAL_IRQS
+
+/* the maximum for MXS-based */
+#define MXS_GPIO_IRQS (32 * 5)
+
+/*
+ * The next 16 interrupts are for board specific purposes. Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these. If you need more, increase MXS_BOARD_IRQS, but keep it
+ * within sensible limits.
+ */
+#define MXS_BOARD_IRQ_START (MXS_GPIO_IRQ_START + MXS_GPIO_IRQS)
+#define MXS_BOARD_IRQS 16
+
+#define NR_IRQS (MXS_BOARD_IRQ_START + MXS_BOARD_IRQS)
+
+#endif /* __MACH_MXS_IRQS_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h
new file mode 100644
index 0000000..b5420a5
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/memory.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MXS_MEMORY_H__
+#define __MACH_MXS_MEMORY_H__
+
+#define PHYS_OFFSET UL(0x40000000)
+
+#endif /* __MACH_MXS_MEMORY_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h
new file mode 100644
index 0000000..9edd02e
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/mx23.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX23_H__
+#define __MACH_MX23_H__
+
+#include <mach/mxs.h>
+
+/*
+ * OCRAM
+ */
+#define MX23_OCRAM_BASE_ADDR 0x00000000
+#define MX23_OCRAM_SIZE SZ_32K
+
+/*
+ * IO
+ */
+#define MX23_IO_BASE_ADDR 0x80000000
+#define MX23_IO_SIZE SZ_1M
+
+#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000)
+#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000)
+#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000)
+#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000)
+#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000)
+#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000)
+#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000)
+#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000)
+#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000)
+#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000)
+#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000)
+#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000)
+#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000)
+#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000)
+#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000)
+#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000)
+#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000)
+#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000)
+#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000)
+#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000)
+#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000)
+#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000)
+#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000)
+#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000)
+#define MX23_I2C0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000)
+#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000)
+#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000)
+#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000)
+#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000)
+#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000)
+#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000)
+#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000)
+#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000)
+#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000)
+
+#define MX23_IO_P2V(x) MXS_IO_P2V(x)
+#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x))
+
+/*
+ * IRQ
+ */
+#define MX23_INT_DUART 0
+#define MX23_INT_COMMS_RX 1
+#define MX23_INT_COMMS_TX 1
+#define MX23_INT_SSP2_ERROR 2
+#define MX23_INT_VDD5V 3
+#define MX23_INT_HEADPHONE_SHORT 4
+#define MX23_INT_DAC_DMA 5
+#define MX23_INT_DAC_ERROR 6
+#define MX23_INT_ADC_DMA 7
+#define MX23_INT_ADC_ERROR 8
+#define MX23_INT_SPDIF_DMA 9
+#define MX23_INT_SAIF2_DMA 9
+#define MX23_INT_SPDIF_ERROR 10
+#define MX23_INT_SAIF1_IRQ 10
+#define MX23_INT_SAIF2_IRQ 10
+#define MX23_INT_USB_CTRL 11
+#define MX23_INT_USB_WAKEUP 12
+#define MX23_INT_GPMI_DMA 13
+#define MX23_INT_SSP1_DMA 14
+#define MX23_INT_SSP_ERROR 15
+#define MX23_INT_GPIO0 16
+#define MX23_INT_GPIO1 17
+#define MX23_INT_GPIO2 18
+#define MX23_INT_SAIF1_DMA 19
+#define MX23_INT_SSP2_DMA 20
+#define MX23_INT_ECC8_IRQ 21
+#define MX23_INT_RTC_ALARM 22
+#define MX23_INT_UARTAPP_TX_DMA 23
+#define MX23_INT_UARTAPP_INTERNAL 24
+#define MX23_INT_UARTAPP_RX_DMA 25
+#define MX23_INT_I2C_DMA 26
+#define MX23_INT_I2C_ERROR 27
+#define MX23_INT_TIMER0 28
+#define MX23_INT_TIMER1 29
+#define MX23_INT_TIMER2 30
+#define MX23_INT_TIMER3 31
+#define MX23_INT_BATT_BRNOUT 32
+#define MX23_INT_VDDD_BRNOUT 33
+#define MX23_INT_VDDIO_BRNOUT 34
+#define MX23_INT_VDD18_BRNOUT 35
+#define MX23_INT_TOUCH_DETECT 36
+#define MX23_INT_LRADC_CH0 37
+#define MX23_INT_LRADC_CH1 38
+#define MX23_INT_LRADC_CH2 39
+#define MX23_INT_LRADC_CH3 40
+#define MX23_INT_LRADC_CH4 41
+#define MX23_INT_LRADC_CH5 42
+#define MX23_INT_LRADC_CH6 43
+#define MX23_INT_LRADC_CH7 44
+#define MX23_INT_LCDIF_DMA 45
+#define MX23_INT_LCDIF_ERROR 46
+#define MX23_INT_DIGCTL_DEBUG_TRAP 47
+#define MX23_INT_RTC_1MSEC 48
+#define MX23_INT_DRI_DMA 49
+#define MX23_INT_DRI_ATTENTION 50
+#define MX23_INT_GPMI_ATTENTION 51
+#define MX23_INT_IR 52
+#define MX23_INT_DCP_VMI 53
+#define MX23_INT_DCP 54
+#define MX23_INT_BCH 56
+#define MX23_INT_PXP 57
+#define MX23_INT_UARTAPP2_TX_DMA 58
+#define MX23_INT_UARTAPP2_INTERNAL 59
+#define MX23_INT_UARTAPP2_RX_DMA 60
+#define MX23_INT_VDAC_DETECT 61
+#define MX23_INT_VDD5V_DROOP 64
+#define MX23_INT_DCDC4P2_BO 65
+
+#endif /* __MACH_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
new file mode 100644
index 0000000..0716745
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/mx28.h
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX28_H__
+#define __MACH_MX28_H__
+
+#include <mach/mxs.h>
+
+/*
+ * OCRAM
+ */
+#define MX28_OCRAM_BASE_ADDR 0x00000000
+#define MX28_OCRAM_SIZE SZ_128K
+
+/*
+ * IO
+ */
+#define MX28_IO_BASE_ADDR 0x80000000
+#define MX28_IO_SIZE SZ_1M
+
+#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000)
+#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000)
+#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000)
+#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000)
+#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000)
+#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000)
+#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000)
+#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000)
+#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000)
+#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000)
+#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000)
+#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000)
+#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000)
+#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000)
+#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000)
+#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000)
+#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000)
+#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000)
+#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000)
+#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000)
+#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000)
+#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000)
+#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200)
+#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300)
+#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400)
+#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500)
+#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700)
+#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800)
+#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000)
+#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000)
+#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000)
+#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000)
+#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000)
+#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000)
+#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000)
+#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000)
+#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000)
+#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000)
+#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000)
+#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000)
+#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000)
+#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000)
+#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000)
+#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000)
+#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000)
+#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000)
+#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000)
+#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000)
+#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000)
+#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000)
+#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000)
+#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000)
+#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000)
+
+#define MX28_IO_P2V(x) MXS_IO_P2V(x)
+#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x))
+
+/*
+ * IRQ
+ */
+#define MX28_INT_BATT_BRNOUT 0
+#define MX28_INT_VDDD_BRNOUT 1
+#define MX28_INT_VDDIO_BRNOUT 2
+#define MX28_INT_VDDA_BRNOUT 3
+#define MX28_INT_VDD5V_DROOP 4
+#define MX28_INT_DCDC4P2_BRNOUT 5
+#define MX28_INT_VDD5V 6
+#define MX28_INT_CAN0 8
+#define MX28_INT_CAN1 9
+#define MX28_INT_LRADC_TOUCH 10
+#define MX28_INT_HSADC 13
+#define MX28_INT_IRADC_THRESH0 14
+#define MX28_INT_IRADC_THRESH1 15
+#define MX28_INT_LRADC_CH0 16
+#define MX28_INT_LRADC_CH1 17
+#define MX28_INT_LRADC_CH2 18
+#define MX28_INT_LRADC_CH3 19
+#define MX28_INT_LRADC_CH4 20
+#define MX28_INT_LRADC_CH5 21
+#define MX28_INT_LRADC_CH6 22
+#define MX28_INT_LRADC_CH7 23
+#define MX28_INT_LRADC_BUTTON0 24
+#define MX28_INT_LRADC_BUTTON1 25
+#define MX28_INT_PERFMON 27
+#define MX28_INT_RTC_1MSEC 28
+#define MX28_INT_RTC_ALARM 29
+#define MX28_INT_COMMS 31
+#define MX28_INT_EMI_ERR 32
+#define MX28_INT_LCDIF 38
+#define MX28_INT_PXP 39
+#define MX28_INT_BCH 41
+#define MX28_INT_GPMI 42
+#define MX28_INT_SPDIF_ERROR 45
+#define MX28_INT_DUART 47
+#define MX28_INT_TIMER0 48
+#define MX28_INT_TIMER1 49
+#define MX28_INT_TIMER2 50
+#define MX28_INT_TIMER3 51
+#define MX28_INT_DCP_VMI 52
+#define MX28_INT_DCP 53
+#define MX28_INT_DCP_SECURE 54
+#define MX28_INT_SAIF1 58
+#define MX28_INT_SAIF0 59
+#define MX28_INT_SPDIF_DMA 66
+#define MX28_INT_I2C0_DMA 68
+#define MX28_INT_I2C1_DMA 69
+#define MX28_INT_AUART0_RX_DMA 70
+#define MX28_INT_AUART0_TX_DMA 71
+#define MX28_INT_AUART1_RX_DMA 72
+#define MX28_INT_AUART1_TX_DMA 73
+#define MX28_INT_AUART2_RX_DMA 74
+#define MX28_INT_AUART2_TX_DMA 75
+#define MX28_INT_AUART3_RX_DMA 76
+#define MX28_INT_AUART3_TX_DMA 77
+#define MX28_INT_AUART4_RX_DMA 78
+#define MX28_INT_AUART4_TX_DMA 79
+#define MX28_INT_SAIF0_DMA 80
+#define MX28_INT_SAIF1_DMA 81
+#define MX28_INT_SSP0_DMA 82
+#define MX28_INT_SSP1_DMA 83
+#define MX28_INT_SSP2_DMA 84
+#define MX28_INT_SSP3_DMA 85
+#define MX28_INT_LCDIF_DMA 86
+#define MX28_INT_HSADC_DMA 87
+#define MX28_INT_GPMI_DMA 88
+#define MX28_INT_DIGCTL_DEBUG_TRAP 89
+#define MX28_INT_USB1 92
+#define MX28_INT_USB0 93
+#define MX28_INT_USB1_WAKEUP 94
+#define MX28_INT_USB0_WAKEUP 95
+#define MX28_INT_SSP0 96
+#define MX28_INT_SSP1 97
+#define MX28_INT_SSP2 98
+#define MX28_INT_SSP3 99
+#define MX28_INT_ENET_SWI 100
+#define MX28_INT_ENET_MAC0 101
+#define MX28_INT_ENET_MAC1 102
+#define MX28_INT_ENET_MAC0_1588 103
+#define MX28_INT_ENET_MAC1_1588 104
+#define MX28_INT_I2C1_ERROR 110
+#define MX28_INT_I2C0_ERROR 111
+#define MX28_INT_AUART0 112
+#define MX28_INT_AUART1 113
+#define MX28_INT_AUART2 114
+#define MX28_INT_AUART3 115
+#define MX28_INT_AUART4 116
+#define MX28_INT_GPIO4 123
+#define MX28_INT_GPIO3 124
+#define MX28_INT_GPIO2 125
+#define MX28_INT_GPIO1 126
+#define MX28_INT_GPIO0 127
+
+#endif /* __MACH_MX28_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
new file mode 100644
index 0000000..f186c08
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MXS_H__
+#define __MACH_MXS_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+/*
+ * MXS CPU types
+ */
+#define cpu_is_mx23() (machine_is_mx23evk())
+#define cpu_is_mx28() (machine_is_mx28evk())
+
+/*
+ * IO addresses common to MXS-based
+ */
+#define MXS_IO_BASE_ADDR 0x80000000
+#define MXS_IO_SIZE SZ_1M
+
+#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000)
+#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000)
+#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000)
+#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000)
+#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000)
+#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000)
+#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000)
+#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000)
+#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000)
+#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000)
+#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000)
+#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000)
+#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000)
+#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000)
+#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000)
+#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000)
+#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000)
+#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000)
+#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000)
+#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000)
+#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000)
+#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000)
+#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000)
+#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000)
+
+/*
+ * It maps the whole address space to [0xf4000000, 0xf50fffff].
+ *
+ * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000
+ * IO 0x80000000+0x100000 -> 0xf5000000+0x100000
+ */
+#define MXS_IO_P2V(x) (0xf4000000 + \
+ (((x) & 0x80000000) >> 7) + \
+ (((x) & 0x000fffff)))
+
+#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x))
+
+#define mxs_map_entry(soc, name, _type) { \
+ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
+ .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \
+ .length = soc ## _ ## name ## _SIZE, \
+ .type = _type, \
+}
+
+#define MXS_SET_ADDR 0x4
+#define MXS_CLR_ADDR 0x8
+#define MXS_TOG_ADDR 0xc
+
+#ifndef __ASSEMBLER__
+static inline void __mxs_setl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_SET_ADDR);
+}
+
+static inline void __mxs_clrl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_CLR_ADDR);
+}
+
+static inline void __mxs_togl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_TOG_ADDR);
+}
+#endif
+
+#endif /* __MACH_MXS_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
new file mode 100644
index 0000000..0e42823
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MXS_SYSTEM_H__
+#define __MACH_MXS_SYSTEM_H__
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+void arch_reset(char mode, const char *cmd);
+
+#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/timex.h b/arch/arm/mach-mxs/include/mach/timex.h
new file mode 100644
index 0000000..734ce89
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/timex.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MXS_TIMEX_H__
+#define __MACH_MXS_TIMEX_H__
+
+#define CLOCK_TICK_RATE 32000 /* 32K */
+
+#endif /* __MACH_MXS_TIMEX_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
new file mode 100644
index 0000000..a005e76f
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-mxs/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) Shane Nay (shane@minirl.com)
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_MXS_UNCOMPRESS_H__
+#define __MACH_MXS_UNCOMPRESS_H__
+
+#include <asm/mach-types.h>
+
+static unsigned long mxs_duart_base;
+
+#define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x)))
+
+#define MXS_DUART_DR 0x00
+#define MXS_DUART_FR 0x18
+#define MXS_DUART_FR_TXFE (1 << 7)
+#define MXS_DUART_CR 0x30
+#define MXS_DUART_CR_UARTEN (1 << 0)
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. If it's not, the output is
+ * simply discarded.
+ */
+
+static void putc(int ch)
+{
+ if (!mxs_duart_base)
+ return;
+ if (!(MXS_DUART(MXS_DUART_CR) & MXS_DUART_CR_UARTEN))
+ return;
+
+ while (!(MXS_DUART(MXS_DUART_FR) & MXS_DUART_FR_TXFE))
+ barrier();
+
+ MXS_DUART(MXS_DUART_DR) = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+#define MX23_DUART_BASE_ADDR 0x80070000
+#define MX28_DUART_BASE_ADDR 0x80074000
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+ switch (arch_id) {
+ case MACH_TYPE_MX23EVK:
+ mxs_duart_base = MX23_DUART_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX28EVK:
+ mxs_duart_base = MX28_DUART_BASE_ADDR;
+ break;
+ default:
+ break;
+ }
+}
+
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
+
+#endif /* __MACH_MXS_UNCOMPRESS_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/vmalloc.h b/arch/arm/mach-mxs/include/mach/vmalloc.h
new file mode 100644
index 0000000..103b016
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2000 Russell King.
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MXS_VMALLOC_H__
+#define __MACH_MXS_VMALLOC_H__
+
+/* vmalloc ending address */
+#define VMALLOC_END 0xf4000000UL
+
+#endif /* __MACH_MXS_VMALLOC_H__ */
diff --git a/arch/arm/mach-mxs/iomux.c b/arch/arm/mach-mxs/iomux.c
new file mode 100644
index 0000000..0e804e2
--- /dev/null
+++ b/arch/arm/mach-mxs/iomux.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/mxs.h>
+#include <mach/iomux.h>
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad)
+{
+ u32 reg, ofs, bp, bm;
+ void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
+
+ /* muxsel */
+ ofs = 0x100;
+ ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
+ bp = PAD_PIN(pad) % 16 * 2;
+ bm = 0x3 << bp;
+ reg = __raw_readl(iomux_base + ofs);
+ reg &= ~bm;
+ reg |= PAD_MUXSEL(pad) << bp;
+ __raw_writel(reg, iomux_base + ofs);
+
+ /* drive */
+ ofs = cpu_is_mx23() ? 0x200 : 0x300;
+ ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
+ /* mA */
+ if (PAD_MA_VALID(pad)) {
+ bp = PAD_PIN(pad) % 8 * 4;
+ bm = 0x3 << bp;
+ reg = __raw_readl(iomux_base + ofs);
+ reg &= ~bm;
+ reg |= PAD_MA(pad) << bp;
+ __raw_writel(reg, iomux_base + ofs);
+ }
+ /* vol */
+ if (PAD_VOL_VALID(pad)) {
+ bp = PAD_PIN(pad) % 8 * 4 + 2;
+ if (PAD_VOL(pad))
+ __mxs_setl(1 << bp, iomux_base + ofs);
+ else
+ __mxs_clrl(1 << bp, iomux_base + ofs);
+ }
+
+ /* pull */
+ if (PAD_PULL_VALID(pad)) {
+ ofs = cpu_is_mx23() ? 0x400 : 0x600;
+ ofs += PAD_BANK(pad) * 0x10;
+ bp = PAD_PIN(pad);
+ if (PAD_PULL(pad))
+ __mxs_setl(1 << bp, iomux_base + ofs);
+ else
+ __mxs_clrl(1 << bp, iomux_base + ofs);
+ }
+
+ return 0;
+}
+
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
+{
+ const iomux_cfg_t *p = pad_list;
+ int i;
+ int ret;
+
+ for (i = 0; i < count; i++) {
+ ret = mxs_iomux_setup_pad(*p);
+ if (ret)
+ return ret;
+ p++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
new file mode 100644
index 0000000..aa06400
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx23.h>
+
+#include "devices-mx23.h"
+
+static const iomux_cfg_t mx23evk_pads[] __initconst = {
+ /* duart */
+ MX23_PAD_PWM0__DUART_RX | MXS_PAD_4MA,
+ MX23_PAD_PWM1__DUART_TX | MXS_PAD_4MA,
+};
+
+static void __init mx23evk_init(void)
+{
+ mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
+
+ mx23_add_duart();
+}
+
+static void __init mx23evk_timer_init(void)
+{
+ mx23_clocks_init();
+}
+
+static struct sys_timer mx23evk_timer = {
+ .init = mx23evk_timer_init,
+};
+
+MACHINE_START(MX23EVK, "Freescale MX23 EVK")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .map_io = mx23_map_io,
+ .init_irq = mx23_init_irq,
+ .init_machine = mx23evk_init,
+ .timer = &mx23evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
new file mode 100644
index 0000000..d162e95
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+#include "gpio.h"
+
+#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
+#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
+
+static const iomux_cfg_t mx28evk_pads[] __initconst = {
+ /* duart */
+ MX28_PAD_PWM0__DUART_RX |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_PWM1__DUART_TX |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* fec0 */
+ MX28_PAD_ENET0_MDC__ENET0_MDC |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ /* phy power line */
+ MX28_PAD_SSP1_DATA3__GPIO_2_15 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* phy reset line */
+ MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+};
+
+/* fec */
+static void __init mx28evk_fec_reset(void)
+{
+ int ret;
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("pll2", NULL);
+ if (!IS_ERR(clk))
+ clk_enable(clk);
+
+ /* Power up fec phy */
+ ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power");
+ if (ret) {
+ pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret);
+ return;
+ }
+
+ ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0);
+ if (ret) {
+ pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret);
+ return;
+ }
+
+ /* Reset fec phy */
+ ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset");
+ if (ret) {
+ pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret);
+ return;
+ }
+
+ gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0);
+ if (ret) {
+ pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret);
+ return;
+ }
+
+ mdelay(1);
+ gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
+}
+
+static const struct fec_platform_data mx28_fec_pdata __initconst = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static void __init mx28evk_init(void)
+{
+ mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
+
+ mx28_add_duart();
+
+ mx28evk_fec_reset();
+ mx28_add_fec(0, &mx28_fec_pdata);
+}
+
+static void __init mx28evk_timer_init(void)
+{
+ mx28_clocks_init();
+}
+
+static struct sys_timer mx28evk_timer = {
+ .init = mx28evk_timer_init,
+};
+
+MACHINE_START(MX28EVK, "Freescale MX28 EVK")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .map_io = mx28_map_io,
+ .init_irq = mx28_init_irq,
+ .init_machine = mx28evk_init,
+ .timer = &mx28evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c
new file mode 100644
index 0000000..5148cd6
--- /dev/null
+++ b/arch/arm/mach-mxs/mm-mx23.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/mx23.h>
+#include <mach/common.h>
+#include <mach/iomux.h>
+
+/*
+ * Define the MX23 memory map.
+ */
+static struct map_desc mx23_io_desc[] __initdata = {
+ mxs_map_entry(MX23, OCRAM, MT_DEVICE),
+ mxs_map_entry(MX23, IO, MT_DEVICE),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx23_map_io(void)
+{
+ iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
+}
+
+void __init mx23_init_irq(void)
+{
+ icoll_init_irq();
+ mx23_register_gpios();
+}
diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c
new file mode 100644
index 0000000..7e4cea3
--- /dev/null
+++ b/arch/arm/mach-mxs/mm-mx28.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/mx28.h>
+#include <mach/common.h>
+#include <mach/iomux.h>
+
+/*
+ * Define the MX28 memory map.
+ */
+static struct map_desc mx28_io_desc[] __initdata = {
+ mxs_map_entry(MX28, OCRAM, MT_DEVICE),
+ mxs_map_entry(MX28, IO, MT_DEVICE),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx28_map_io(void)
+{
+ iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
+}
+
+void __init mx28_init_irq(void)
+{
+ icoll_init_irq();
+ mx28_register_gpios();
+}
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
new file mode 100644
index 0000000..dbc0474
--- /dev/null
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
@@ -0,0 +1,455 @@
+/*
+ * Freescale CLKCTRL Register Definitions
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This file is created by xml file. Don't Edit it.
+ *
+ * Xml Revision: 1.48
+ * Template revision: 26195
+ */
+
+#ifndef __REGS_CLKCTRL_MX23_H__
+#define __REGS_CLKCTRL_MX23_H__
+
+
+#define HW_CLKCTRL_PLLCTRL0 (0x00000000)
+#define HW_CLKCTRL_PLLCTRL0_SET (0x00000004)
+#define HW_CLKCTRL_PLLCTRL0_CLR (0x00000008)
+#define HW_CLKCTRL_PLLCTRL0_TOG (0x0000000c)
+
+#define BP_CLKCTRL_PLLCTRL0_RSRVD6 30
+#define BM_CLKCTRL_PLLCTRL0_RSRVD6 0xC0000000
+#define BF_CLKCTRL_PLLCTRL0_RSRVD6(v) \
+ (((v) << 30) & BM_CLKCTRL_PLLCTRL0_RSRVD6)
+#define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28
+#define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000
+#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \
+ (((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL)
+#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1
+#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2
+#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLLCTRL0_RSRVD5 26
+#define BM_CLKCTRL_PLLCTRL0_RSRVD5 0x0C000000
+#define BF_CLKCTRL_PLLCTRL0_RSRVD5(v) \
+ (((v) << 26) & BM_CLKCTRL_PLLCTRL0_RSRVD5)
+#define BP_CLKCTRL_PLLCTRL0_CP_SEL 24
+#define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000
+#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \
+ (((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL)
+#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1
+#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2
+#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLLCTRL0_RSRVD4 22
+#define BM_CLKCTRL_PLLCTRL0_RSRVD4 0x00C00000
+#define BF_CLKCTRL_PLLCTRL0_RSRVD4(v) \
+ (((v) << 22) & BM_CLKCTRL_PLLCTRL0_RSRVD4)
+#define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20
+#define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000
+#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \
+ (((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL)
+#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1
+#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2
+#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3
+#define BM_CLKCTRL_PLLCTRL0_RSRVD3 0x00080000
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
+#define BM_CLKCTRL_PLLCTRL0_RSRVD2 0x00020000
+#define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000
+#define BP_CLKCTRL_PLLCTRL0_RSRVD1 0
+#define BM_CLKCTRL_PLLCTRL0_RSRVD1 0x0000FFFF
+#define BF_CLKCTRL_PLLCTRL0_RSRVD1(v) \
+ (((v) << 0) & BM_CLKCTRL_PLLCTRL0_RSRVD1)
+
+#define HW_CLKCTRL_PLLCTRL1 (0x00000010)
+
+#define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000
+#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000
+#define BP_CLKCTRL_PLLCTRL1_RSRVD1 16
+#define BM_CLKCTRL_PLLCTRL1_RSRVD1 0x3FFF0000
+#define BF_CLKCTRL_PLLCTRL1_RSRVD1(v) \
+ (((v) << 16) & BM_CLKCTRL_PLLCTRL1_RSRVD1)
+#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0
+#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF
+#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \
+ (((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT)
+
+#define HW_CLKCTRL_CPU (0x00000020)
+#define HW_CLKCTRL_CPU_SET (0x00000024)
+#define HW_CLKCTRL_CPU_CLR (0x00000028)
+#define HW_CLKCTRL_CPU_TOG (0x0000002c)
+
+#define BP_CLKCTRL_CPU_RSRVD5 30
+#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000
+#define BF_CLKCTRL_CPU_RSRVD5(v) \
+ (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5)
+#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000
+#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000
+#define BM_CLKCTRL_CPU_RSRVD4 0x08000000
+#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000
+#define BP_CLKCTRL_CPU_DIV_XTAL 16
+#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000
+#define BF_CLKCTRL_CPU_DIV_XTAL(v) \
+ (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
+#define BP_CLKCTRL_CPU_RSRVD3 13
+#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000
+#define BF_CLKCTRL_CPU_RSRVD3(v) \
+ (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3)
+#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000
+#define BM_CLKCTRL_CPU_RSRVD2 0x00000800
+#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400
+#define BP_CLKCTRL_CPU_RSRVD1 6
+#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0
+#define BF_CLKCTRL_CPU_RSRVD1(v) \
+ (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1)
+#define BP_CLKCTRL_CPU_DIV_CPU 0
+#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
+#define BF_CLKCTRL_CPU_DIV_CPU(v) \
+ (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
+
+#define HW_CLKCTRL_HBUS (0x00000030)
+#define HW_CLKCTRL_HBUS_SET (0x00000034)
+#define HW_CLKCTRL_HBUS_CLR (0x00000038)
+#define HW_CLKCTRL_HBUS_TOG (0x0000003c)
+
+#define BP_CLKCTRL_HBUS_RSRVD4 30
+#define BM_CLKCTRL_HBUS_RSRVD4 0xC0000000
+#define BF_CLKCTRL_HBUS_RSRVD4(v) \
+ (((v) << 30) & BM_CLKCTRL_HBUS_RSRVD4)
+#define BM_CLKCTRL_HBUS_BUSY 0x20000000
+#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000
+#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000
+#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000
+#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000
+#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000
+#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000
+#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000
+#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000
+#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000
+#define BM_CLKCTRL_HBUS_RSRVD2 0x00080000
+#define BP_CLKCTRL_HBUS_SLOW_DIV 16
+#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000
+#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \
+ (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
+#define BP_CLKCTRL_HBUS_RSRVD1 6
+#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0
+#define BF_CLKCTRL_HBUS_RSRVD1(v) \
+ (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1)
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
+#define BP_CLKCTRL_HBUS_DIV 0
+#define BM_CLKCTRL_HBUS_DIV 0x0000001F
+#define BF_CLKCTRL_HBUS_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_HBUS_DIV)
+
+#define HW_CLKCTRL_XBUS (0x00000040)
+
+#define BM_CLKCTRL_XBUS_BUSY 0x80000000
+#define BP_CLKCTRL_XBUS_RSRVD1 11
+#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF800
+#define BF_CLKCTRL_XBUS_RSRVD1(v) \
+ (((v) << 11) & BM_CLKCTRL_XBUS_RSRVD1)
+#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400
+#define BP_CLKCTRL_XBUS_DIV 0
+#define BM_CLKCTRL_XBUS_DIV 0x000003FF
+#define BF_CLKCTRL_XBUS_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_XBUS_DIV)
+
+#define HW_CLKCTRL_XTAL (0x00000050)
+#define HW_CLKCTRL_XTAL_SET (0x00000054)
+#define HW_CLKCTRL_XTAL_CLR (0x00000058)
+#define HW_CLKCTRL_XTAL_TOG (0x0000005c)
+
+#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31
+#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000
+#define BP_CLKCTRL_XTAL_FILT_CLK24M_GATE 30
+#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE 0x40000000
+#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29
+#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000
+#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000
+#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000
+#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26
+#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000
+#define BP_CLKCTRL_XTAL_RSRVD1 2
+#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC
+#define BF_CLKCTRL_XTAL_RSRVD1(v) \
+ (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1)
+#define BP_CLKCTRL_XTAL_DIV_UART 0
+#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003
+#define BF_CLKCTRL_XTAL_DIV_UART(v) \
+ (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
+
+#define HW_CLKCTRL_PIX (0x00000060)
+
+#define BP_CLKCTRL_PIX_CLKGATE 31
+#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
+#define BM_CLKCTRL_PIX_RSRVD2 0x40000000
+#define BM_CLKCTRL_PIX_BUSY 0x20000000
+#define BP_CLKCTRL_PIX_RSRVD1 13
+#define BM_CLKCTRL_PIX_RSRVD1 0x1FFFE000
+#define BF_CLKCTRL_PIX_RSRVD1(v) \
+ (((v) << 13) & BM_CLKCTRL_PIX_RSRVD1)
+#define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000
+#define BP_CLKCTRL_PIX_DIV 0
+#define BM_CLKCTRL_PIX_DIV 0x00000FFF
+#define BF_CLKCTRL_PIX_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_PIX_DIV)
+
+#define HW_CLKCTRL_SSP (0x00000070)
+
+#define BP_CLKCTRL_SSP_CLKGATE 31
+#define BM_CLKCTRL_SSP_CLKGATE 0x80000000
+#define BM_CLKCTRL_SSP_RSRVD2 0x40000000
+#define BM_CLKCTRL_SSP_BUSY 0x20000000
+#define BP_CLKCTRL_SSP_RSRVD1 10
+#define BM_CLKCTRL_SSP_RSRVD1 0x1FFFFC00
+#define BF_CLKCTRL_SSP_RSRVD1(v) \
+ (((v) << 10) & BM_CLKCTRL_SSP_RSRVD1)
+#define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200
+#define BP_CLKCTRL_SSP_DIV 0
+#define BM_CLKCTRL_SSP_DIV 0x000001FF
+#define BF_CLKCTRL_SSP_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_SSP_DIV)
+
+#define HW_CLKCTRL_GPMI (0x00000080)
+
+#define BP_CLKCTRL_GPMI_CLKGATE 31
+#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000
+#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000
+#define BM_CLKCTRL_GPMI_BUSY 0x20000000
+#define BP_CLKCTRL_GPMI_RSRVD1 11
+#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800
+#define BF_CLKCTRL_GPMI_RSRVD1(v) \
+ (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1)
+#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400
+#define BP_CLKCTRL_GPMI_DIV 0
+#define BM_CLKCTRL_GPMI_DIV 0x000003FF
+#define BF_CLKCTRL_GPMI_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_GPMI_DIV)
+
+#define HW_CLKCTRL_SPDIF (0x00000090)
+
+#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000
+#define BP_CLKCTRL_SPDIF_RSRVD 0
+#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF
+#define BF_CLKCTRL_SPDIF_RSRVD(v) \
+ (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD)
+
+#define HW_CLKCTRL_EMI (0x000000a0)
+
+#define BP_CLKCTRL_EMI_CLKGATE 31
+#define BM_CLKCTRL_EMI_CLKGATE 0x80000000
+#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000
+#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000
+#define BP_CLKCTRL_EMI_RSRVD3 18
+#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000
+#define BF_CLKCTRL_EMI_RSRVD3(v) \
+ (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3)
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
+#define BP_CLKCTRL_EMI_RSRVD2 12
+#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000
+#define BF_CLKCTRL_EMI_RSRVD2(v) \
+ (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2)
+#define BP_CLKCTRL_EMI_DIV_XTAL 8
+#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00
+#define BF_CLKCTRL_EMI_DIV_XTAL(v) \
+ (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
+#define BP_CLKCTRL_EMI_RSRVD1 6
+#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0
+#define BF_CLKCTRL_EMI_RSRVD1(v) \
+ (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1)
+#define BP_CLKCTRL_EMI_DIV_EMI 0
+#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
+#define BF_CLKCTRL_EMI_DIV_EMI(v) \
+ (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
+
+#define HW_CLKCTRL_IR (0x000000b0)
+
+#define BM_CLKCTRL_IR_CLKGATE 0x80000000
+#define BM_CLKCTRL_IR_RSRVD3 0x40000000
+#define BM_CLKCTRL_IR_AUTO_DIV 0x20000000
+#define BM_CLKCTRL_IR_IR_BUSY 0x10000000
+#define BM_CLKCTRL_IR_IROV_BUSY 0x08000000
+#define BP_CLKCTRL_IR_RSRVD2 25
+#define BM_CLKCTRL_IR_RSRVD2 0x06000000
+#define BF_CLKCTRL_IR_RSRVD2(v) \
+ (((v) << 25) & BM_CLKCTRL_IR_RSRVD2)
+#define BP_CLKCTRL_IR_IROV_DIV 16
+#define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000
+#define BF_CLKCTRL_IR_IROV_DIV(v) \
+ (((v) << 16) & BM_CLKCTRL_IR_IROV_DIV)
+#define BP_CLKCTRL_IR_RSRVD1 10
+#define BM_CLKCTRL_IR_RSRVD1 0x0000FC00
+#define BF_CLKCTRL_IR_RSRVD1(v) \
+ (((v) << 10) & BM_CLKCTRL_IR_RSRVD1)
+#define BP_CLKCTRL_IR_IR_DIV 0
+#define BM_CLKCTRL_IR_IR_DIV 0x000003FF
+#define BF_CLKCTRL_IR_IR_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_IR_IR_DIV)
+
+#define HW_CLKCTRL_SAIF (0x000000c0)
+
+#define BM_CLKCTRL_SAIF_CLKGATE 0x80000000
+#define BM_CLKCTRL_SAIF_RSRVD2 0x40000000
+#define BM_CLKCTRL_SAIF_BUSY 0x20000000
+#define BP_CLKCTRL_SAIF_RSRVD1 17
+#define BM_CLKCTRL_SAIF_RSRVD1 0x1FFE0000
+#define BF_CLKCTRL_SAIF_RSRVD1(v) \
+ (((v) << 17) & BM_CLKCTRL_SAIF_RSRVD1)
+#define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000
+#define BP_CLKCTRL_SAIF_DIV 0
+#define BM_CLKCTRL_SAIF_DIV 0x0000FFFF
+#define BF_CLKCTRL_SAIF_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_SAIF_DIV)
+
+#define HW_CLKCTRL_TV (0x000000d0)
+
+#define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000
+#define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000
+#define BP_CLKCTRL_TV_RSRVD 0
+#define BM_CLKCTRL_TV_RSRVD 0x3FFFFFFF
+#define BF_CLKCTRL_TV_RSRVD(v) \
+ (((v) << 0) & BM_CLKCTRL_TV_RSRVD)
+
+#define HW_CLKCTRL_ETM (0x000000e0)
+
+#define BM_CLKCTRL_ETM_CLKGATE 0x80000000
+#define BM_CLKCTRL_ETM_RSRVD2 0x40000000
+#define BM_CLKCTRL_ETM_BUSY 0x20000000
+#define BP_CLKCTRL_ETM_RSRVD1 7
+#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF80
+#define BF_CLKCTRL_ETM_RSRVD1(v) \
+ (((v) << 7) & BM_CLKCTRL_ETM_RSRVD1)
+#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040
+#define BP_CLKCTRL_ETM_DIV 0
+#define BM_CLKCTRL_ETM_DIV 0x0000003F
+#define BF_CLKCTRL_ETM_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_ETM_DIV)
+
+#define HW_CLKCTRL_FRAC (0x000000f0)
+#define HW_CLKCTRL_FRAC_SET (0x000000f4)
+#define HW_CLKCTRL_FRAC_CLR (0x000000f8)
+#define HW_CLKCTRL_FRAC_TOG (0x000000fc)
+
+#define BP_CLKCTRL_FRAC_CLKGATEIO 31
+#define BM_CLKCTRL_FRAC_CLKGATEIO 0x80000000
+#define BM_CLKCTRL_FRAC_IO_STABLE 0x40000000
+#define BP_CLKCTRL_FRAC_IOFRAC 24
+#define BM_CLKCTRL_FRAC_IOFRAC 0x3F000000
+#define BF_CLKCTRL_FRAC_IOFRAC(v) \
+ (((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC)
+#define BP_CLKCTRL_FRAC_CLKGATEPIX 23
+#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
+#define BM_CLKCTRL_FRAC_PIX_STABLE 0x00400000
+#define BP_CLKCTRL_FRAC_PIXFRAC 16
+#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
+#define BF_CLKCTRL_FRAC_PIXFRAC(v) \
+ (((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC)
+#define BP_CLKCTRL_FRAC_CLKGATEEMI 15
+#define BM_CLKCTRL_FRAC_CLKGATEEMI 0x00008000
+#define BM_CLKCTRL_FRAC_EMI_STABLE 0x00004000
+#define BP_CLKCTRL_FRAC_EMIFRAC 8
+#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
+#define BF_CLKCTRL_FRAC_EMIFRAC(v) \
+ (((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC)
+#define BP_CLKCTRL_FRAC_CLKGATECPU 7
+#define BM_CLKCTRL_FRAC_CLKGATECPU 0x00000080
+#define BM_CLKCTRL_FRAC_CPU_STABLE 0x00000040
+#define BP_CLKCTRL_FRAC_CPUFRAC 0
+#define BM_CLKCTRL_FRAC_CPUFRAC 0x0000003F
+#define BF_CLKCTRL_FRAC_CPUFRAC(v) \
+ (((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC)
+
+#define HW_CLKCTRL_FRAC1 (0x00000100)
+#define HW_CLKCTRL_FRAC1_SET (0x00000104)
+#define HW_CLKCTRL_FRAC1_CLR (0x00000108)
+#define HW_CLKCTRL_FRAC1_TOG (0x0000010c)
+
+#define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000
+#define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000
+#define BP_CLKCTRL_FRAC1_RSRVD1 0
+#define BM_CLKCTRL_FRAC1_RSRVD1 0x3FFFFFFF
+#define BF_CLKCTRL_FRAC1_RSRVD1(v) \
+ (((v) << 0) & BM_CLKCTRL_FRAC1_RSRVD1)
+
+#define HW_CLKCTRL_CLKSEQ (0x00000110)
+#define HW_CLKCTRL_CLKSEQ_SET (0x00000114)
+#define HW_CLKCTRL_CLKSEQ_CLR (0x00000118)
+#define HW_CLKCTRL_CLKSEQ_TOG (0x0000011c)
+
+#define BP_CLKCTRL_CLKSEQ_RSRVD1 9
+#define BM_CLKCTRL_CLKSEQ_RSRVD1 0xFFFFFE00
+#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \
+ (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD1)
+#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100
+#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080
+#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020
+#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010
+#define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008
+#define BM_CLKCTRL_CLKSEQ_RSRVD0 0x00000004
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001
+
+#define HW_CLKCTRL_RESET (0x00000120)
+
+#define BP_CLKCTRL_RESET_RSRVD 2
+#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFFC
+#define BF_CLKCTRL_RESET_RSRVD(v) \
+ (((v) << 2) & BM_CLKCTRL_RESET_RSRVD)
+#define BM_CLKCTRL_RESET_CHIP 0x00000002
+#define BM_CLKCTRL_RESET_DIG 0x00000001
+
+#define HW_CLKCTRL_STATUS (0x00000130)
+
+#define BP_CLKCTRL_STATUS_CPU_LIMIT 30
+#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000
+#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
+ (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
+#define BP_CLKCTRL_STATUS_RSRVD 0
+#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF
+#define BF_CLKCTRL_STATUS_RSRVD(v) \
+ (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD)
+
+#define HW_CLKCTRL_VERSION (0x00000140)
+
+#define BP_CLKCTRL_VERSION_MAJOR 24
+#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000
+#define BF_CLKCTRL_VERSION_MAJOR(v) \
+ (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
+#define BP_CLKCTRL_VERSION_MINOR 16
+#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000
+#define BF_CLKCTRL_VERSION_MINOR(v) \
+ (((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
+#define BP_CLKCTRL_VERSION_STEP 0
+#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF
+#define BF_CLKCTRL_VERSION_STEP(v) \
+ (((v) << 0) & BM_CLKCTRL_VERSION_STEP)
+
+#endif /* __REGS_CLKCTRL_MX23_H__ */
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
new file mode 100644
index 0000000..661df187
--- /dev/null
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
@@ -0,0 +1,663 @@
+/*
+ * Freescale CLKCTRL Register Definitions
+ *
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This file is created by xml file. Don't Edit it.
+ *
+ * Xml Revision: 1.48
+ * Template revision: 26195
+ */
+
+#ifndef __REGS_CLKCTRL_MX28_H__
+#define __REGS_CLKCTRL_MX28_H__
+
+#define HW_CLKCTRL_PLL0CTRL0 (0x00000000)
+#define HW_CLKCTRL_PLL0CTRL0_SET (0x00000004)
+#define HW_CLKCTRL_PLL0CTRL0_CLR (0x00000008)
+#define HW_CLKCTRL_PLL0CTRL0_TOG (0x0000000c)
+
+#define BP_CLKCTRL_PLL0CTRL0_RSRVD6 30
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD6 0xC0000000
+#define BF_CLKCTRL_PLL0CTRL0_RSRVD6(v) \
+ (((v) << 30) & BM_CLKCTRL_PLL0CTRL0_RSRVD6)
+#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL 28
+#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL 0x30000000
+#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v) \
+ (((v) << 28) & BM_CLKCTRL_PLL0CTRL0_LFR_SEL)
+#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2 0x1
+#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05 0x2
+#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLL0CTRL0_RSRVD5 26
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD5 0x0C000000
+#define BF_CLKCTRL_PLL0CTRL0_RSRVD5(v) \
+ (((v) << 26) & BM_CLKCTRL_PLL0CTRL0_RSRVD5)
+#define BP_CLKCTRL_PLL0CTRL0_CP_SEL 24
+#define BM_CLKCTRL_PLL0CTRL0_CP_SEL 0x03000000
+#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v) \
+ (((v) << 24) & BM_CLKCTRL_PLL0CTRL0_CP_SEL)
+#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2 0x1
+#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05 0x2
+#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLL0CTRL0_RSRVD4 22
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD4 0x00C00000
+#define BF_CLKCTRL_PLL0CTRL0_RSRVD4(v) \
+ (((v) << 22) & BM_CLKCTRL_PLL0CTRL0_RSRVD4)
+#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL 20
+#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL 0x00300000
+#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v) \
+ (((v) << 20) & BM_CLKCTRL_PLL0CTRL0_DIV_SEL)
+#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER 0x1
+#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST 0x2
+#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD3 0x00080000
+#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS 0x00040000
+#define BM_CLKCTRL_PLL0CTRL0_POWER 0x00020000
+#define BP_CLKCTRL_PLL0CTRL0_RSRVD1 0
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD1 0x0001FFFF
+#define BF_CLKCTRL_PLL0CTRL0_RSRVD1(v) \
+ (((v) << 0) & BM_CLKCTRL_PLL0CTRL0_RSRVD1)
+
+#define HW_CLKCTRL_PLL0CTRL1 (0x00000010)
+
+#define BM_CLKCTRL_PLL0CTRL1_LOCK 0x80000000
+#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK 0x40000000
+#define BP_CLKCTRL_PLL0CTRL1_RSRVD1 16
+#define BM_CLKCTRL_PLL0CTRL1_RSRVD1 0x3FFF0000
+#define BF_CLKCTRL_PLL0CTRL1_RSRVD1(v) \
+ (((v) << 16) & BM_CLKCTRL_PLL0CTRL1_RSRVD1)
+#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0
+#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0x0000FFFF
+#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v) \
+ (((v) << 0) & BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT)
+
+#define HW_CLKCTRL_PLL1CTRL0 (0x00000020)
+#define HW_CLKCTRL_PLL1CTRL0_SET (0x00000024)
+#define HW_CLKCTRL_PLL1CTRL0_CLR (0x00000028)
+#define HW_CLKCTRL_PLL1CTRL0_TOG (0x0000002c)
+
+#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI 0x80000000
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD6 0x40000000
+#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL 28
+#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL 0x30000000
+#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v) \
+ (((v) << 28) & BM_CLKCTRL_PLL1CTRL0_LFR_SEL)
+#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2 0x1
+#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05 0x2
+#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLL1CTRL0_RSRVD5 26
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD5 0x0C000000
+#define BF_CLKCTRL_PLL1CTRL0_RSRVD5(v) \
+ (((v) << 26) & BM_CLKCTRL_PLL1CTRL0_RSRVD5)
+#define BP_CLKCTRL_PLL1CTRL0_CP_SEL 24
+#define BM_CLKCTRL_PLL1CTRL0_CP_SEL 0x03000000
+#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v) \
+ (((v) << 24) & BM_CLKCTRL_PLL1CTRL0_CP_SEL)
+#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2 0x1
+#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05 0x2
+#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLL1CTRL0_RSRVD4 22
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD4 0x00C00000
+#define BF_CLKCTRL_PLL1CTRL0_RSRVD4(v) \
+ (((v) << 22) & BM_CLKCTRL_PLL1CTRL0_RSRVD4)
+#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL 20
+#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL 0x00300000
+#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v) \
+ (((v) << 20) & BM_CLKCTRL_PLL1CTRL0_DIV_SEL)
+#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__DEFAULT 0x0
+#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER 0x1
+#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST 0x2
+#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD3 0x00080000
+#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS 0x00040000
+#define BM_CLKCTRL_PLL1CTRL0_POWER 0x00020000
+#define BP_CLKCTRL_PLL1CTRL0_RSRVD1 0
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD1 0x0001FFFF
+#define BF_CLKCTRL_PLL1CTRL0_RSRVD1(v) \
+ (((v) << 0) & BM_CLKCTRL_PLL1CTRL0_RSRVD1)
+
+#define HW_CLKCTRL_PLL1CTRL1 (0x00000030)
+
+#define BM_CLKCTRL_PLL1CTRL1_LOCK 0x80000000
+#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK 0x40000000
+#define BP_CLKCTRL_PLL1CTRL1_RSRVD1 16
+#define BM_CLKCTRL_PLL1CTRL1_RSRVD1 0x3FFF0000
+#define BF_CLKCTRL_PLL1CTRL1_RSRVD1(v) \
+ (((v) << 16) & BM_CLKCTRL_PLL1CTRL1_RSRVD1)
+#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0
+#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0x0000FFFF
+#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v) \
+ (((v) << 0) & BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT)
+
+#define HW_CLKCTRL_PLL2CTRL0 (0x00000040)
+#define HW_CLKCTRL_PLL2CTRL0_SET (0x00000044)
+#define HW_CLKCTRL_PLL2CTRL0_CLR (0x00000048)
+#define HW_CLKCTRL_PLL2CTRL0_TOG (0x0000004c)
+
+#define BM_CLKCTRL_PLL2CTRL0_CLKGATE 0x80000000
+#define BM_CLKCTRL_PLL2CTRL0_RSRVD3 0x40000000
+#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL 28
+#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL 0x30000000
+#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v) \
+ (((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL)
+#define BM_CLKCTRL_PLL2CTRL0_RSRVD2 0x08000000
+#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B 0x04000000
+#define BP_CLKCTRL_PLL2CTRL0_CP_SEL 24
+#define BM_CLKCTRL_PLL2CTRL0_CP_SEL 0x03000000
+#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v) \
+ (((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL)
+#define BM_CLKCTRL_PLL2CTRL0_POWER 0x00800000
+#define BP_CLKCTRL_PLL2CTRL0_RSRVD1 0
+#define BM_CLKCTRL_PLL2CTRL0_RSRVD1 0x007FFFFF
+#define BF_CLKCTRL_PLL2CTRL0_RSRVD1(v) \
+ (((v) << 0) & BM_CLKCTRL_PLL2CTRL0_RSRVD1)
+
+#define HW_CLKCTRL_CPU (0x00000050)
+#define HW_CLKCTRL_CPU_SET (0x00000054)
+#define HW_CLKCTRL_CPU_CLR (0x00000058)
+#define HW_CLKCTRL_CPU_TOG (0x0000005c)
+
+#define BP_CLKCTRL_CPU_RSRVD5 30
+#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000
+#define BF_CLKCTRL_CPU_RSRVD5(v) \
+ (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5)
+#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000
+#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000
+#define BM_CLKCTRL_CPU_RSRVD4 0x08000000
+#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000
+#define BP_CLKCTRL_CPU_DIV_XTAL 16
+#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000
+#define BF_CLKCTRL_CPU_DIV_XTAL(v) \
+ (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
+#define BP_CLKCTRL_CPU_RSRVD3 13
+#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000
+#define BF_CLKCTRL_CPU_RSRVD3(v) \
+ (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3)
+#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000
+#define BM_CLKCTRL_CPU_RSRVD2 0x00000800
+#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400
+#define BP_CLKCTRL_CPU_RSRVD1 6
+#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0
+#define BF_CLKCTRL_CPU_RSRVD1(v) \
+ (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1)
+#define BP_CLKCTRL_CPU_DIV_CPU 0
+#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
+#define BF_CLKCTRL_CPU_DIV_CPU(v) \
+ (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
+
+#define HW_CLKCTRL_HBUS (0x00000060)
+#define HW_CLKCTRL_HBUS_SET (0x00000064)
+#define HW_CLKCTRL_HBUS_CLR (0x00000068)
+#define HW_CLKCTRL_HBUS_TOG (0x0000006c)
+
+#define BM_CLKCTRL_HBUS_ASM_BUSY 0x80000000
+#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x40000000
+#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x20000000
+#define BM_CLKCTRL_HBUS_RSRVD2 0x10000000
+#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE 0x08000000
+#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000
+#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000
+#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000
+#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000
+#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000
+#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000
+#define BM_CLKCTRL_HBUS_ASM_ENABLE 0x00100000
+#define BM_CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE 0x00080000
+#define BP_CLKCTRL_HBUS_SLOW_DIV 16
+#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000
+#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \
+ (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
+#define BP_CLKCTRL_HBUS_RSRVD1 6
+#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0
+#define BF_CLKCTRL_HBUS_RSRVD1(v) \
+ (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1)
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
+#define BP_CLKCTRL_HBUS_DIV 0
+#define BM_CLKCTRL_HBUS_DIV 0x0000001F
+#define BF_CLKCTRL_HBUS_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_HBUS_DIV)
+
+#define HW_CLKCTRL_XBUS (0x00000070)
+
+#define BM_CLKCTRL_XBUS_BUSY 0x80000000
+#define BP_CLKCTRL_XBUS_RSRVD1 12
+#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF000
+#define BF_CLKCTRL_XBUS_RSRVD1(v) \
+ (((v) << 12) & BM_CLKCTRL_XBUS_RSRVD1)
+#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE 0x00000800
+#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400
+#define BP_CLKCTRL_XBUS_DIV 0
+#define BM_CLKCTRL_XBUS_DIV 0x000003FF
+#define BF_CLKCTRL_XBUS_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_XBUS_DIV)
+
+#define HW_CLKCTRL_XTAL (0x00000080)
+#define HW_CLKCTRL_XTAL_SET (0x00000084)
+#define HW_CLKCTRL_XTAL_CLR (0x00000088)
+#define HW_CLKCTRL_XTAL_TOG (0x0000008c)
+
+#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31
+#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000
+#define BM_CLKCTRL_XTAL_RSRVD3 0x40000000
+#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29
+#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000
+#define BP_CLKCTRL_XTAL_RSRVD2 27
+#define BM_CLKCTRL_XTAL_RSRVD2 0x18000000
+#define BF_CLKCTRL_XTAL_RSRVD2(v) \
+ (((v) << 27) & BM_CLKCTRL_XTAL_RSRVD2)
+#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26
+#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000
+#define BP_CLKCTRL_XTAL_RSRVD1 2
+#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC
+#define BF_CLKCTRL_XTAL_RSRVD1(v) \
+ (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1)
+#define BP_CLKCTRL_XTAL_DIV_UART 0
+#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003
+#define BF_CLKCTRL_XTAL_DIV_UART(v) \
+ (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
+
+#define HW_CLKCTRL_SSP0 (0x00000090)
+
+#define BP_CLKCTRL_SSP0_CLKGATE 31
+#define BM_CLKCTRL_SSP0_CLKGATE 0x80000000
+#define BM_CLKCTRL_SSP0_RSRVD2 0x40000000
+#define BM_CLKCTRL_SSP0_BUSY 0x20000000
+#define BP_CLKCTRL_SSP0_RSRVD1 10
+#define BM_CLKCTRL_SSP0_RSRVD1 0x1FFFFC00
+#define BF_CLKCTRL_SSP0_RSRVD1(v) \
+ (((v) << 10) & BM_CLKCTRL_SSP0_RSRVD1)
+#define BM_CLKCTRL_SSP0_DIV_FRAC_EN 0x00000200
+#define BP_CLKCTRL_SSP0_DIV 0
+#define BM_CLKCTRL_SSP0_DIV 0x000001FF
+#define BF_CLKCTRL_SSP0_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_SSP0_DIV)
+
+#define HW_CLKCTRL_SSP1 (0x000000a0)
+
+#define BP_CLKCTRL_SSP1_CLKGATE 31
+#define BM_CLKCTRL_SSP1_CLKGATE 0x80000000
+#define BM_CLKCTRL_SSP1_RSRVD2 0x40000000
+#define BM_CLKCTRL_SSP1_BUSY 0x20000000
+#define BP_CLKCTRL_SSP1_RSRVD1 10
+#define BM_CLKCTRL_SSP1_RSRVD1 0x1FFFFC00
+#define BF_CLKCTRL_SSP1_RSRVD1(v) \
+ (((v) << 10) & BM_CLKCTRL_SSP1_RSRVD1)
+#define BM_CLKCTRL_SSP1_DIV_FRAC_EN 0x00000200
+#define BP_CLKCTRL_SSP1_DIV 0
+#define BM_CLKCTRL_SSP1_DIV 0x000001FF
+#define BF_CLKCTRL_SSP1_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_SSP1_DIV)
+
+#define HW_CLKCTRL_SSP2 (0x000000b0)
+
+#define BP_CLKCTRL_SSP2_CLKGATE 31
+#define BM_CLKCTRL_SSP2_CLKGATE 0x80000000
+#define BM_CLKCTRL_SSP2_RSRVD2 0x40000000
+#define BM_CLKCTRL_SSP2_BUSY 0x20000000
+#define BP_CLKCTRL_SSP2_RSRVD1 10
+#define BM_CLKCTRL_SSP2_RSRVD1 0x1FFFFC00
+#define BF_CLKCTRL_SSP2_RSRVD1(v) \
+ (((v) << 10) & BM_CLKCTRL_SSP2_RSRVD1)
+#define BM_CLKCTRL_SSP2_DIV_FRAC_EN 0x00000200
+#define BP_CLKCTRL_SSP2_DIV 0
+#define BM_CLKCTRL_SSP2_DIV 0x000001FF
+#define BF_CLKCTRL_SSP2_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_SSP2_DIV)
+
+#define HW_CLKCTRL_SSP3 (0x000000c0)
+
+#define BP_CLKCTRL_SSP3_CLKGATE 31
+#define BM_CLKCTRL_SSP3_CLKGATE 0x80000000
+#define BM_CLKCTRL_SSP3_RSRVD2 0x40000000
+#define BM_CLKCTRL_SSP3_BUSY 0x20000000
+#define BP_CLKCTRL_SSP3_RSRVD1 10
+#define BM_CLKCTRL_SSP3_RSRVD1 0x1FFFFC00
+#define BF_CLKCTRL_SSP3_RSRVD1(v) \
+ (((v) << 10) & BM_CLKCTRL_SSP3_RSRVD1)
+#define BM_CLKCTRL_SSP3_DIV_FRAC_EN 0x00000200
+#define BP_CLKCTRL_SSP3_DIV 0
+#define BM_CLKCTRL_SSP3_DIV 0x000001FF
+#define BF_CLKCTRL_SSP3_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_SSP3_DIV)
+
+#define HW_CLKCTRL_GPMI (0x000000d0)
+
+#define BP_CLKCTRL_GPMI_CLKGATE 31
+#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000
+#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000
+#define BM_CLKCTRL_GPMI_BUSY 0x20000000
+#define BP_CLKCTRL_GPMI_RSRVD1 11
+#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800
+#define BF_CLKCTRL_GPMI_RSRVD1(v) \
+ (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1)
+#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400
+#define BP_CLKCTRL_GPMI_DIV 0
+#define BM_CLKCTRL_GPMI_DIV 0x000003FF
+#define BF_CLKCTRL_GPMI_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_GPMI_DIV)
+
+#define HW_CLKCTRL_SPDIF (0x000000e0)
+
+#define BP_CLKCTRL_SPDIF_CLKGATE 31
+#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000
+#define BP_CLKCTRL_SPDIF_RSRVD 0
+#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF
+#define BF_CLKCTRL_SPDIF_RSRVD(v) \
+ (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD)
+
+#define HW_CLKCTRL_EMI (0x000000f0)
+
+#define BP_CLKCTRL_EMI_CLKGATE 31
+#define BM_CLKCTRL_EMI_CLKGATE 0x80000000
+#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000
+#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000
+#define BP_CLKCTRL_EMI_RSRVD3 18
+#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000
+#define BF_CLKCTRL_EMI_RSRVD3(v) \
+ (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3)
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
+#define BP_CLKCTRL_EMI_RSRVD2 12
+#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000
+#define BF_CLKCTRL_EMI_RSRVD2(v) \
+ (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2)
+#define BP_CLKCTRL_EMI_DIV_XTAL 8
+#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00
+#define BF_CLKCTRL_EMI_DIV_XTAL(v) \
+ (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
+#define BP_CLKCTRL_EMI_RSRVD1 6
+#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0
+#define BF_CLKCTRL_EMI_RSRVD1(v) \
+ (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1)
+#define BP_CLKCTRL_EMI_DIV_EMI 0
+#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
+#define BF_CLKCTRL_EMI_DIV_EMI(v) \
+ (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
+
+#define HW_CLKCTRL_SAIF0 (0x00000100)
+
+#define BP_CLKCTRL_SAIF0_CLKGATE 31
+#define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000
+#define BM_CLKCTRL_SAIF0_RSRVD2 0x40000000
+#define BM_CLKCTRL_SAIF0_BUSY 0x20000000
+#define BP_CLKCTRL_SAIF0_RSRVD1 17
+#define BM_CLKCTRL_SAIF0_RSRVD1 0x1FFE0000
+#define BF_CLKCTRL_SAIF0_RSRVD1(v) \
+ (((v) << 17) & BM_CLKCTRL_SAIF0_RSRVD1)
+#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN 0x00010000
+#define BP_CLKCTRL_SAIF0_DIV 0
+#define BM_CLKCTRL_SAIF0_DIV 0x0000FFFF
+#define BF_CLKCTRL_SAIF0_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_SAIF0_DIV)
+
+#define HW_CLKCTRL_SAIF1 (0x00000110)
+
+#define BP_CLKCTRL_SAIF1_CLKGATE 31
+#define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000
+#define BM_CLKCTRL_SAIF1_RSRVD2 0x40000000
+#define BM_CLKCTRL_SAIF1_BUSY 0x20000000
+#define BP_CLKCTRL_SAIF1_RSRVD1 17
+#define BM_CLKCTRL_SAIF1_RSRVD1 0x1FFE0000
+#define BF_CLKCTRL_SAIF1_RSRVD1(v) \
+ (((v) << 17) & BM_CLKCTRL_SAIF1_RSRVD1)
+#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN 0x00010000
+#define BP_CLKCTRL_SAIF1_DIV 0
+#define BM_CLKCTRL_SAIF1_DIV 0x0000FFFF
+#define BF_CLKCTRL_SAIF1_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_SAIF1_DIV)
+
+#define HW_CLKCTRL_DIS_LCDIF (0x00000120)
+
+#define BP_CLKCTRL_DIS_LCDIF_CLKGATE 31
+#define BM_CLKCTRL_DIS_LCDIF_CLKGATE 0x80000000
+#define BM_CLKCTRL_DIS_LCDIF_RSRVD2 0x40000000
+#define BM_CLKCTRL_DIS_LCDIF_BUSY 0x20000000
+#define BP_CLKCTRL_DIS_LCDIF_RSRVD1 14
+#define BM_CLKCTRL_DIS_LCDIF_RSRVD1 0x1FFFC000
+#define BF_CLKCTRL_DIS_LCDIF_RSRVD1(v) \
+ (((v) << 14) & BM_CLKCTRL_DIS_LCDIF_RSRVD1)
+#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN 0x00002000
+#define BP_CLKCTRL_DIS_LCDIF_DIV 0
+#define BM_CLKCTRL_DIS_LCDIF_DIV 0x00001FFF
+#define BF_CLKCTRL_DIS_LCDIF_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_DIS_LCDIF_DIV)
+
+#define HW_CLKCTRL_ETM (0x00000130)
+
+#define BM_CLKCTRL_ETM_CLKGATE 0x80000000
+#define BM_CLKCTRL_ETM_RSRVD2 0x40000000
+#define BM_CLKCTRL_ETM_BUSY 0x20000000
+#define BP_CLKCTRL_ETM_RSRVD1 8
+#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF00
+#define BF_CLKCTRL_ETM_RSRVD1(v) \
+ (((v) << 8) & BM_CLKCTRL_ETM_RSRVD1)
+#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000080
+#define BP_CLKCTRL_ETM_DIV 0
+#define BM_CLKCTRL_ETM_DIV 0x0000007F
+#define BF_CLKCTRL_ETM_DIV(v) \
+ (((v) << 0) & BM_CLKCTRL_ETM_DIV)
+
+#define HW_CLKCTRL_ENET (0x00000140)
+
+#define BM_CLKCTRL_ENET_SLEEP 0x80000000
+#define BP_CLKCTRL_ENET_DISABLE 30
+#define BM_CLKCTRL_ENET_DISABLE 0x40000000
+#define BM_CLKCTRL_ENET_STATUS 0x20000000
+#define BM_CLKCTRL_ENET_RSRVD1 0x10000000
+#define BM_CLKCTRL_ENET_BUSY_TIME 0x08000000
+#define BP_CLKCTRL_ENET_DIV_TIME 21
+#define BM_CLKCTRL_ENET_DIV_TIME 0x07E00000
+#define BF_CLKCTRL_ENET_DIV_TIME(v) \
+ (((v) << 21) & BM_CLKCTRL_ENET_DIV_TIME)
+#define BM_CLKCTRL_ENET_BUSY 0x08000000
+#define BP_CLKCTRL_ENET_DIV 21
+#define BM_CLKCTRL_ENET_DIV 0x07E00000
+#define BF_CLKCTRL_ENET_DIV(v) \
+ (((v) << 21) & BM_CLKCTRL_ENET_DIV)
+#define BP_CLKCTRL_ENET_TIME_SEL 19
+#define BM_CLKCTRL_ENET_TIME_SEL 0x00180000
+#define BF_CLKCTRL_ENET_TIME_SEL(v) \
+ (((v) << 19) & BM_CLKCTRL_ENET_TIME_SEL)
+#define BV_CLKCTRL_ENET_TIME_SEL__XTAL 0x0
+#define BV_CLKCTRL_ENET_TIME_SEL__PLL 0x1
+#define BV_CLKCTRL_ENET_TIME_SEL__RMII_CLK 0x2
+#define BV_CLKCTRL_ENET_TIME_SEL__UNDEFINED 0x3
+#define BM_CLKCTRL_ENET_CLK_OUT_EN 0x00040000
+#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP 0x00020000
+#define BM_CLKCTRL_ENET_RESET_BY_SW 0x00010000
+#define BP_CLKCTRL_ENET_RSRVD0 0
+#define BM_CLKCTRL_ENET_RSRVD0 0x0000FFFF
+#define BF_CLKCTRL_ENET_RSRVD0(v) \
+ (((v) << 0) & BM_CLKCTRL_ENET_RSRVD0)
+
+#define HW_CLKCTRL_HSADC (0x00000150)
+
+#define BM_CLKCTRL_HSADC_RSRVD2 0x80000000
+#define BM_CLKCTRL_HSADC_RESETB 0x40000000
+#define BP_CLKCTRL_HSADC_FREQDIV 28
+#define BM_CLKCTRL_HSADC_FREQDIV 0x30000000
+#define BF_CLKCTRL_HSADC_FREQDIV(v) \
+ (((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV)
+#define BP_CLKCTRL_HSADC_RSRVD1 0
+#define BM_CLKCTRL_HSADC_RSRVD1 0x0FFFFFFF
+#define BF_CLKCTRL_HSADC_RSRVD1(v) \
+ (((v) << 0) & BM_CLKCTRL_HSADC_RSRVD1)
+
+#define HW_CLKCTRL_FLEXCAN (0x00000160)
+
+#define BM_CLKCTRL_FLEXCAN_RSRVD2 0x80000000
+#define BP_CLKCTRL_FLEXCAN_STOP_CAN0 30
+#define BM_CLKCTRL_FLEXCAN_STOP_CAN0 0x40000000
+#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS 0x20000000
+#define BP_CLKCTRL_FLEXCAN_STOP_CAN1 28
+#define BM_CLKCTRL_FLEXCAN_STOP_CAN1 0x10000000
+#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS 0x08000000
+#define BP_CLKCTRL_FLEXCAN_RSRVD1 0
+#define BM_CLKCTRL_FLEXCAN_RSRVD1 0x07FFFFFF
+#define BF_CLKCTRL_FLEXCAN_RSRVD1(v) \
+ (((v) << 0) & BM_CLKCTRL_FLEXCAN_RSRVD1)
+
+#define HW_CLKCTRL_FRAC0 (0x000001b0)
+#define HW_CLKCTRL_FRAC0_SET (0x000001b4)
+#define HW_CLKCTRL_FRAC0_CLR (0x000001b8)
+#define HW_CLKCTRL_FRAC0_TOG (0x000001bc)
+
+#define BP_CLKCTRL_FRAC0_CLKGATEIO0 31
+#define BM_CLKCTRL_FRAC0_CLKGATEIO0 0x80000000
+#define BM_CLKCTRL_FRAC0_IO0_STABLE 0x40000000
+#define BP_CLKCTRL_FRAC0_IO0FRAC 24
+#define BM_CLKCTRL_FRAC0_IO0FRAC 0x3F000000
+#define BF_CLKCTRL_FRAC0_IO0FRAC(v) \
+ (((v) << 24) & BM_CLKCTRL_FRAC0_IO0FRAC)
+#define BP_CLKCTRL_FRAC0_CLKGATEIO1 23
+#define BM_CLKCTRL_FRAC0_CLKGATEIO1 0x00800000
+#define BM_CLKCTRL_FRAC0_IO1_STABLE 0x00400000
+#define BP_CLKCTRL_FRAC0_IO1FRAC 16
+#define BM_CLKCTRL_FRAC0_IO1FRAC 0x003F0000
+#define BF_CLKCTRL_FRAC0_IO1FRAC(v) \
+ (((v) << 16) & BM_CLKCTRL_FRAC0_IO1FRAC)
+#define BP_CLKCTRL_FRAC0_CLKGATEEMI 15
+#define BM_CLKCTRL_FRAC0_CLKGATEEMI 0x00008000
+#define BM_CLKCTRL_FRAC0_EMI_STABLE 0x00004000
+#define BP_CLKCTRL_FRAC0_EMIFRAC 8
+#define BM_CLKCTRL_FRAC0_EMIFRAC 0x00003F00
+#define BF_CLKCTRL_FRAC0_EMIFRAC(v) \
+ (((v) << 8) & BM_CLKCTRL_FRAC0_EMIFRAC)
+#define BP_CLKCTRL_FRAC0_CLKGATECPU 7
+#define BM_CLKCTRL_FRAC0_CLKGATECPU 0x00000080
+#define BM_CLKCTRL_FRAC0_CPU_STABLE 0x00000040
+#define BP_CLKCTRL_FRAC0_CPUFRAC 0
+#define BM_CLKCTRL_FRAC0_CPUFRAC 0x0000003F
+#define BF_CLKCTRL_FRAC0_CPUFRAC(v) \
+ (((v) << 0) & BM_CLKCTRL_FRAC0_CPUFRAC)
+
+#define HW_CLKCTRL_FRAC1 (0x000001c0)
+#define HW_CLKCTRL_FRAC1_SET (0x000001c4)
+#define HW_CLKCTRL_FRAC1_CLR (0x000001c8)
+#define HW_CLKCTRL_FRAC1_TOG (0x000001cc)
+
+#define BP_CLKCTRL_FRAC1_RSRVD2 24
+#define BM_CLKCTRL_FRAC1_RSRVD2 0xFF000000
+#define BF_CLKCTRL_FRAC1_RSRVD2(v) \
+ (((v) << 24) & BM_CLKCTRL_FRAC1_RSRVD2)
+#define BP_CLKCTRL_FRAC1_CLKGATEGPMI 23
+#define BM_CLKCTRL_FRAC1_CLKGATEGPMI 0x00800000
+#define BM_CLKCTRL_FRAC1_GPMI_STABLE 0x00400000
+#define BP_CLKCTRL_FRAC1_GPMIFRAC 16
+#define BM_CLKCTRL_FRAC1_GPMIFRAC 0x003F0000
+#define BF_CLKCTRL_FRAC1_GPMIFRAC(v) \
+ (((v) << 16) & BM_CLKCTRL_FRAC1_GPMIFRAC)
+#define BP_CLKCTRL_FRAC1_CLKGATEHSADC 15
+#define BM_CLKCTRL_FRAC1_CLKGATEHSADC 0x00008000
+#define BM_CLKCTRL_FRAC1_HSADC_STABLE 0x00004000
+#define BP_CLKCTRL_FRAC1_HSADCFRAC 8
+#define BM_CLKCTRL_FRAC1_HSADCFRAC 0x00003F00
+#define BF_CLKCTRL_FRAC1_HSADCFRAC(v) \
+ (((v) << 8) & BM_CLKCTRL_FRAC1_HSADCFRAC)
+#define BP_CLKCTRL_FRAC1_CLKGATEPIX 7
+#define BM_CLKCTRL_FRAC1_CLKGATEPIX 0x00000080
+#define BM_CLKCTRL_FRAC1_PIX_STABLE 0x00000040
+#define BP_CLKCTRL_FRAC1_PIXFRAC 0
+#define BM_CLKCTRL_FRAC1_PIXFRAC 0x0000003F
+#define BF_CLKCTRL_FRAC1_PIXFRAC(v) \
+ (((v) << 0) & BM_CLKCTRL_FRAC1_PIXFRAC)
+
+#define HW_CLKCTRL_CLKSEQ (0x000001d0)
+#define HW_CLKCTRL_CLKSEQ_SET (0x000001d4)
+#define HW_CLKCTRL_CLKSEQ_CLR (0x000001d8)
+#define HW_CLKCTRL_CLKSEQ_TOG (0x000001dc)
+
+#define BP_CLKCTRL_CLKSEQ_RSRVD0 19
+#define BM_CLKCTRL_CLKSEQ_RSRVD0 0xFFF80000
+#define BF_CLKCTRL_CLKSEQ_RSRVD0(v) \
+ (((v) << 19) & BM_CLKCTRL_CLKSEQ_RSRVD0)
+#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00040000
+#define BP_CLKCTRL_CLKSEQ_RSRVD1 15
+#define BM_CLKCTRL_CLKSEQ_RSRVD1 0x00038000
+#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \
+ (((v) << 15) & BM_CLKCTRL_CLKSEQ_RSRVD1)
+#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF 0x00004000
+#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1
+#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD 0x0
+#define BP_CLKCTRL_CLKSEQ_RSRVD2 9
+#define BM_CLKCTRL_CLKSEQ_RSRVD2 0x00003E00
+#define BF_CLKCTRL_CLKSEQ_RSRVD2(v) \
+ (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD2)
+#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100
+#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000080
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3 0x00000040
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP2 0x00000020
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP1 0x00000010
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP0 0x00000008
+#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000004
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1 0x00000002
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0 0x00000001
+
+#define HW_CLKCTRL_RESET (0x000001e0)
+
+#define BP_CLKCTRL_RESET_RSRVD 6
+#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFC0
+#define BF_CLKCTRL_RESET_RSRVD(v) \
+ (((v) << 6) & BM_CLKCTRL_RESET_RSRVD)
+#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE 0x00000020
+#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE 0x00000010
+#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE 0x00000008
+#define BM_CLKCTRL_RESET_THERMAL_RESET_DEFAULT 0x00000004
+#define BM_CLKCTRL_RESET_CHIP 0x00000002
+#define BM_CLKCTRL_RESET_DIG 0x00000001
+
+#define HW_CLKCTRL_STATUS (0x000001f0)
+
+#define BP_CLKCTRL_STATUS_CPU_LIMIT 30
+#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000
+#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
+ (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
+#define BP_CLKCTRL_STATUS_RSRVD 0
+#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF
+#define BF_CLKCTRL_STATUS_RSRVD(v) \
+ (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD)
+
+#define HW_CLKCTRL_VERSION (0x00000200)
+
+#define BP_CLKCTRL_VERSION_MAJOR 24
+#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000
+#define BF_CLKCTRL_VERSION_MAJOR(v) \
+ (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
+#define BP_CLKCTRL_VERSION_MINOR 16
+#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000
+#define BF_CLKCTRL_VERSION_MINOR(v) \
+ (((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
+#define BP_CLKCTRL_VERSION_STEP 0
+#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF
+#define BF_CLKCTRL_VERSION_STEP(v) \
+ (((v) << 0) & BM_CLKCTRL_VERSION_STEP)
+
+#endif /* __REGS_CLKCTRL_MX28_H__ */
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
new file mode 100644
index 0000000..9343d7e
--- /dev/null
+++ b/arch/arm/mach-mxs/system.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/proc-fns.h>
+#include <asm/system.h>
+
+#include <mach/mxs.h>
+#include <mach/common.h>
+
+#define MX23_CLKCTRL_RESET_OFFSET 0x120
+#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
+#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
+
+#define MXS_MODULE_CLKGATE (1 << 30)
+#define MXS_MODULE_SFTRST (1 << 31)
+
+static void __iomem *mxs_clkctrl_reset_addr;
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+void arch_reset(char mode, const char *cmd)
+{
+ /* reset the chip */
+ __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
+
+ pr_err("Failed to assert the chip reset\n");
+
+ /* Delay to allow the serial port to show the message */
+ mdelay(50);
+
+ /* We'll take a jump through zero as a poor second */
+ cpu_reset(0);
+}
+
+static int __init mxs_arch_reset_init(void)
+{
+ struct clk *clk;
+
+ mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) +
+ (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET :
+ MX28_CLKCTRL_RESET_OFFSET);
+
+ clk = clk_get_sys("rtc", NULL);
+ if (!IS_ERR(clk))
+ clk_enable(clk);
+
+ return 0;
+}
+core_initcall(mxs_arch_reset_init);
+
+/*
+ * Clear the bit and poll it cleared. This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+ int timeout = 0x400;
+
+ /* clear the bit */
+ __mxs_clrl(mask, addr);
+
+ /*
+ * SFTRST needs 3 GPMI clocks to settle, the reference manual
+ * recommends to wait 1us.
+ */
+ udelay(1);
+
+ /* poll the bit becoming clear */
+ while ((__raw_readl(addr) & mask) && --timeout)
+ /* nothing */;
+
+ return !timeout;
+}
+
+int mxs_reset_block(void __iomem *reset_addr)
+{
+ int ret;
+ int timeout = 0x400;
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear CLKGATE */
+ __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr);
+
+ /* set SFTRST to reset the block */
+ __mxs_setl(MXS_MODULE_SFTRST, reset_addr);
+ udelay(1);
+
+ /* poll CLKGATE becoming set */
+ while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout)
+ /* nothing */;
+ if (unlikely(!timeout))
+ goto error;
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear and poll CLKGATE */
+ ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE);
+ if (unlikely(ret))
+ goto error;
+
+ return 0;
+
+error:
+ pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+ return -ETIMEDOUT;
+}
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
new file mode 100644
index 0000000..13647f3
--- /dev/null
+++ b/arch/arm/mach-mxs/timer.c
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2000-2001 Deep Blue Solutions
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <asm/mach/time.h>
+#include <mach/mxs.h>
+#include <mach/common.h>
+
+/*
+ * There are 2 versions of the timrot on Freescale MXS-based SoCs.
+ * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
+ * extends the counter to 32 bits.
+ *
+ * The implementation uses two timers, one for clock_event and
+ * another for clocksource. MX28 uses timrot 0 and 1, while MX23
+ * uses 0 and 2.
+ */
+
+#define MX23_TIMROT_VERSION_OFFSET 0x0a0
+#define MX28_TIMROT_VERSION_OFFSET 0x120
+#define BP_TIMROT_MAJOR_VERSION 24
+#define BV_TIMROT_VERSION_1 0x01
+#define BV_TIMROT_VERSION_2 0x02
+#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1)
+
+/*
+ * There are 4 registers for each timrotv2 instance, and 2 registers
+ * for each timrotv1. So address step 0x40 in macros below strides
+ * one instance of timrotv2 while two instances of timrotv1.
+ *
+ * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
+ * on MX28 while timrot2 on MX23.
+ */
+/* common between v1 and v2 */
+#define HW_TIMROT_ROTCTRL 0x00
+#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40)
+/* v1 only */
+#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40)
+/* v2 only */
+#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40)
+#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40)
+
+#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6)
+#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7)
+#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
+#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15)
+#define BP_TIMROT_TIMCTRLn_SELECT 0
+#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8
+#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb
+
+static struct clock_event_device mxs_clockevent_device;
+static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR);
+static u32 timrot_major_version;
+
+static inline void timrot_irq_disable(void)
+{
+ __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+}
+
+static inline void timrot_irq_enable(void)
+{
+ __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+}
+
+static void timrot_irq_acknowledge(void)
+{
+ __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+}
+
+static cycle_t timrotv1_get_cycles(struct clocksource *cs)
+{
+ return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
+ & 0xffff0000) >> 16);
+}
+
+static cycle_t timrotv2_get_cycles(struct clocksource *cs)
+{
+ return ~__raw_readl(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
+}
+
+static int timrotv1_set_next_event(unsigned long evt,
+ struct clock_event_device *dev)
+{
+ /* timrot decrements the count */
+ __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
+
+ return 0;
+}
+
+static int timrotv2_set_next_event(unsigned long evt,
+ struct clock_event_device *dev)
+{
+ /* timrot decrements the count */
+ __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
+
+ return 0;
+}
+
+static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ timrot_irq_acknowledge();
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mxs_timer_irq = {
+ .name = "MXS Timer Tick",
+ .dev_id = &mxs_clockevent_device,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = mxs_timer_interrupt,
+};
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] const = {
+ [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+ [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
+ [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+ [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /* DEBUG */
+
+static void mxs_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ /* Disable interrupt in timer module */
+ timrot_irq_disable();
+
+ if (mode != mxs_clockevent_mode) {
+ /* Set event time into the furthest future */
+ if (timrot_is_v1())
+ __raw_writel(0xffff,
+ mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+ else
+ __raw_writel(0xffffffff,
+ mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+ /* Clear pending interrupt */
+ timrot_irq_acknowledge();
+ }
+
+#ifdef DEBUG
+ pr_info("%s: changing mode from %s to %s\n", __func__,
+ clock_event_mode_label[mxs_clockevent_mode],
+ clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+ /* Remember timer mode */
+ mxs_clockevent_mode = mode;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ pr_err("%s: Periodic mode is not implemented\n", __func__);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ timrot_irq_enable();
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ /* Left event sources disabled, no more interrupts appear */
+ break;
+ }
+}
+
+static struct clock_event_device mxs_clockevent_device = {
+ .name = "mxs_timrot",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = mxs_set_mode,
+ .set_next_event = timrotv2_set_next_event,
+ .rating = 200,
+};
+
+static int __init mxs_clockevent_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ mxs_clockevent_device.mult =
+ div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift);
+ mxs_clockevent_device.cpumask = cpumask_of(0);
+ if (timrot_is_v1()) {
+ mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
+ mxs_clockevent_device.max_delta_ns =
+ clockevent_delta2ns(0xfffe, &mxs_clockevent_device);
+ mxs_clockevent_device.min_delta_ns =
+ clockevent_delta2ns(0xf, &mxs_clockevent_device);
+ } else {
+ mxs_clockevent_device.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device);
+ mxs_clockevent_device.min_delta_ns =
+ clockevent_delta2ns(0xf, &mxs_clockevent_device);
+ }
+
+ clockevents_register_device(&mxs_clockevent_device);
+
+ return 0;
+}
+
+static struct clocksource clocksource_mxs = {
+ .name = "mxs_timer",
+ .rating = 200,
+ .read = timrotv2_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init mxs_clocksource_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ if (timrot_is_v1()) {
+ clocksource_mxs.read = timrotv1_get_cycles;
+ clocksource_mxs.mask = CLOCKSOURCE_MASK(16);
+ }
+
+ clocksource_register_hz(&clocksource_mxs, c);
+
+ return 0;
+}
+
+void __init mxs_timer_init(struct clk *timer_clk, int irq)
+{
+ clk_enable(timer_clk);
+
+ /*
+ * Initialize timers to a known state
+ */
+ mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
+
+ /* get timrot version */
+ timrot_major_version = __raw_readl(mxs_timrot_base +
+ (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET :
+ MX28_TIMROT_VERSION_OFFSET));
+ timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
+
+ /* one for clock_event */
+ __raw_writel((timrot_is_v1() ?
+ BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+ BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
+ BM_TIMROT_TIMCTRLn_UPDATE |
+ BM_TIMROT_TIMCTRLn_IRQ_EN,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+
+ /* another for clocksource */
+ __raw_writel((timrot_is_v1() ?
+ BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+ BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
+ BM_TIMROT_TIMCTRLn_RELOAD,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
+
+ /* set clocksource timer fixed count to the maximum */
+ if (timrot_is_v1())
+ __raw_writel(0xffff,
+ mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+ else
+ __raw_writel(0xffffffff,
+ mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+ /* init and register the timer to the framework */
+ mxs_clocksource_init(timer_clk);
+ mxs_clockevent_init(timer_clk);
+
+ /* Make irqs happen */
+ setup_irq(irq, &mxs_timer_irq);
+}
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c897e03..6604fc6 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -51,6 +51,13 @@
Buffalo Linkstation Pro/Live platform. Both v1 and
v2 devices are supported.
+config MACH_LINKSTATION_LSCHL
+ bool "Buffalo Linkstation Live v3 (LS-CHL)"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation Live v3 (LS-CHL) platform.
+
config MACH_LINKSTATION_MINI
bool "Buffalo Linkstation Mini"
select I2C_BOARDINFO
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index eb6eabc..7f18cda 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -21,3 +21,4 @@
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
new file mode 100644
index 0000000..20a9b66
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -0,0 +1,327 @@
+/*
+ * arch/arm/mach-orion5x/ls-chl-setup.c
+ *
+ * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio-fan.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-CHL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LSCHL_NOR_BOOT_BASE 0xf4000000
+#define LSCHL_NOR_BOOT_SIZE SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data lschl_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource lschl_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = LSCHL_NOR_BOOT_BASE,
+ .end = LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lschl_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lschl_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &lschl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data lschl_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata lschl_i2c_rtc = {
+ I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LSCHL_GPIO_LED_ALARM 2
+#define LSCHL_GPIO_LED_INFO 3
+#define LSCHL_GPIO_LED_FUNC 17
+#define LSCHL_GPIO_LED_PWR 0
+
+static struct gpio_led lschl_led_pins[] = {
+ {
+ .name = "alarm:red",
+ .gpio = LSCHL_GPIO_LED_ALARM,
+ .active_low = 1,
+ }, {
+ .name = "info:amber",
+ .gpio = LSCHL_GPIO_LED_INFO,
+ .active_low = 1,
+ }, {
+ .name = "func:blue:top",
+ .gpio = LSCHL_GPIO_LED_FUNC,
+ .active_low = 1,
+ }, {
+ .name = "power:blue:bottom",
+ .gpio = LSCHL_GPIO_LED_PWR,
+ },
+};
+
+static struct gpio_led_platform_data lschl_led_data = {
+ .leds = lschl_led_pins,
+ .num_leds = ARRAY_SIZE(lschl_led_pins),
+};
+
+static struct platform_device lschl_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &lschl_led_data,
+ },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data lschl_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * LS-CHL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the LS-CHL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ * to move the switch to ON position
+ *
+ */
+
+static void lschl_power_off(void)
+{
+ arm_machine_restart('h', NULL);
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+#define LSCHL_GPIO_USB_POWER 9
+#define LSCHL_GPIO_AUTO_POWER 17
+#define LSCHL_GPIO_POWER 18
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LSCHL_GPIO_KEY_FUNC 15
+#define LSCHL_GPIO_KEY_POWER 8
+#define LSCHL_GPIO_KEY_AUTOPOWER 10
+#define LSCHL_SW_POWER 0x00
+#define LSCHL_SW_AUTOPOWER 0x01
+#define LSCHL_SW_FUNC 0x02
+
+static struct gpio_keys_button lschl_buttons[] = {
+ {
+ .type = EV_SW,
+ .code = LSCHL_SW_POWER,
+ .gpio = LSCHL_GPIO_KEY_POWER,
+ .desc = "Power-on Switch",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LSCHL_SW_AUTOPOWER,
+ .gpio = LSCHL_GPIO_KEY_AUTOPOWER,
+ .desc = "Power-auto Switch",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LSCHL_SW_FUNC,
+ .gpio = LSCHL_GPIO_KEY_FUNC,
+ .desc = "Function Switch",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data lschl_button_data = {
+ .buttons = lschl_buttons,
+ .nbuttons = ARRAY_SIZE(lschl_buttons),
+};
+
+static struct platform_device lschl_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &lschl_button_data,
+ },
+};
+
+#define LSCHL_GPIO_HDD_POWER 1
+
+/****************************************************************************
+ * GPIO Fan
+ ****************************************************************************/
+
+#define LSCHL_GPIO_FAN_LOW 16
+#define LSCHL_GPIO_FAN_HIGH 14
+#define LSCHL_GPIO_FAN_LOCK 6
+
+static struct gpio_fan_alarm lschl_alarm = {
+ .gpio = LSCHL_GPIO_FAN_LOCK,
+};
+
+static struct gpio_fan_speed lschl_speeds[] = {
+ {
+ .rpm = 0,
+ .ctrl_val = 3,
+ }, {
+ .rpm = 1500,
+ .ctrl_val = 2,
+ }, {
+ .rpm = 3250,
+ .ctrl_val = 1,
+ }, {
+ .rpm = 5000,
+ .ctrl_val = 0,
+ },
+};
+
+static int lschl_gpio_list[] = {
+ LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW,
+};
+
+static struct gpio_fan_platform_data lschl_fan_data = {
+ .num_ctrl = ARRAY_SIZE(lschl_gpio_list),
+ .ctrl = lschl_gpio_list,
+ .alarm = &lschl_alarm,
+ .num_speed = ARRAY_SIZE(lschl_speeds),
+ .speed = lschl_speeds,
+};
+
+static struct platform_device lschl_fan_device = {
+ .name = "gpio-fan",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &lschl_fan_data,
+ },
+};
+
+/****************************************************************************
+ * GPIO Data
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode lschl_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* LED POWER */
+ { 1, MPP_GPIO }, /* HDD POWER */
+ { 2, MPP_GPIO }, /* LED ALARM */
+ { 3, MPP_GPIO }, /* LED INFO */
+ { 4, MPP_UNUSED },
+ { 5, MPP_UNUSED },
+ { 6, MPP_GPIO }, /* FAN LOCK */
+ { 7, MPP_GPIO }, /* SW INIT */
+ { 8, MPP_GPIO }, /* SW POWER */
+ { 9, MPP_GPIO }, /* USB POWER */
+ { 10, MPP_GPIO }, /* SW AUTO POWER */
+ { 11, MPP_UNUSED },
+ { 12, MPP_UNUSED },
+ { 13, MPP_UNUSED },
+ { 14, MPP_GPIO }, /* FAN HIGH */
+ { 15, MPP_GPIO }, /* SW FUNC */
+ { 16, MPP_GPIO }, /* FAN LOW */
+ { 17, MPP_GPIO }, /* LED FUNC */
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
+};
+
+static void __init lschl_init(void)
+{
+ /*
+ * Setup basic Orion functions. Needs to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(lschl_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&lschl_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&lschl_sata_data);
+ orion5x_uart0_init();
+ orion5x_xor_init();
+
+ orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE,
+ LSCHL_NOR_BOOT_SIZE);
+ platform_device_register(&lschl_nor_flash);
+
+ platform_device_register(&lschl_leds);
+
+ platform_device_register(&lschl_button_device);
+
+ platform_device_register(&lschl_fan_device);
+
+ i2c_register_board_info(0, &lschl_i2c_rtc, 1);
+
+ /* usb power on */
+ gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
+
+ /* register power-off method */
+ pm_power_off = lschl_power_off;
+
+ pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
+ /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
+ .boot_params = 0x00000100,
+ .init_machine = lschl_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index c98d81f..2fc9f94 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -50,6 +50,10 @@
select PXA3xx
select CPU_PXA930
+config MACH_SAARB
+ bool "PXA955 Handheld Platform (aka SAARB)"
+ select CPU_PXA955
+
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
@@ -233,10 +237,6 @@
bool "Toradex Colibri PXA270"
select PXA27x
-config MACH_COLIBRI_PXA270_EVALBOARD
- bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
- depends on MACH_COLIBRI
-
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
@@ -254,6 +254,10 @@
select PXA3xx
select CPU_PXA320
+config MACH_COLIBRI_EVALBOARD
+ bool "Toradex Colibri Evaluation Carrier Board support"
+ depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
+
config MACH_VPAC270
bool "Voipac PXA270"
select PXA27x
@@ -653,11 +657,17 @@
help
PXA935 (codename Tavor-P65)
-config CPU_PXA950
+config PXA95x
bool
- select CPU_PXA930
+ select CPU_PJ4
help
- PXA950 (codename Tavor-PV2)
+ Select code specific to PXA95x variants
+
+config CPU_PXA955
+ bool
+ select PXA95x
+ help
+ PXA950 (codename MG1)
config PXA_SHARP_C7xx
bool
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index e2f89c2..cc39d17 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -16,9 +16,10 @@
# Generic drivers that other drivers may depend upon
# SoC-specific code
-obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
@@ -34,6 +35,7 @@
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o
obj-$(CONFIG_MACH_SAAR) += saar.o
+obj-$(CONFIG_MACH_SAARB) += saarb.o
# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
@@ -60,7 +62,7 @@
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o
obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 21e1889..ccb2d0c 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -567,27 +567,29 @@
* NAND
******************************************************************************/
#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static uint16_t balloon3_ctl =
- BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
- BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
- BALLOON3_NAND_CONTROL_FLWP;
-
static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
+ uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_CLE)
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+ balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
else
- balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
+ balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
if (ctrl & NAND_ALE)
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+ balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
else
- balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
+ balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
- __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ if (balloon3_ctl_clr)
+ __raw_writel(balloon3_ctl_clr,
+ BALLOON3_NAND_CONTROL_REG);
+ if (balloon3_ctl_set)
+ __raw_writel(balloon3_ctl_set,
+ BALLOON3_NAND_CONTROL_REG |
+ BALLOON3_FPGA_SETnCLR);
}
if (cmd != NAND_CMD_NONE)
@@ -599,28 +601,33 @@
if (chip < 0 || chip > 3)
return;
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
- BALLOON3_NAND_CONTROL_FLCE1 |
- BALLOON3_NAND_CONTROL_FLCE2 |
- BALLOON3_NAND_CONTROL_FLCE3;
+ /* Assert all nCE lines */
+ __raw_writew(
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
+ BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
/* Deassert correct nCE line */
- balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
+ BALLOON3_NAND_CONTROL_REG);
+}
- __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+static int balloon3_nand_dev_ready(struct mtd_info *mtd)
+{
+ return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
}
static int balloon3_nand_probe(struct platform_device *pdev)
{
- void __iomem *temp_map;
uint16_t ver;
int ret;
- __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+ __raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
+ BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR);
ver = __raw_readw(BALLOON3_FPGA_VER);
- if (ver > 0x0201)
- pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ if (ver < 0x4f08)
+ pr_warn("The FPGA code, version 0x%04x, is too old. "
"NAND support might be broken in this version!", ver);
/* Power up the NAND chips */
@@ -635,7 +642,11 @@
gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
/* Deassert all nCE lines and write protect line */
- __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ __raw_writel(
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+ BALLOON3_NAND_CONTROL_FLWP,
+ BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
return 0;
err2:
@@ -677,7 +688,7 @@
},
.ctrl = {
.hwcontrol = 0,
- .dev_ready = 0,
+ .dev_ready = balloon3_nand_dev_ready,
.select_chip = balloon3_nand_select_chip,
.cmd_ctrl = balloon3_nand_cmd_ctl,
.probe = balloon3_nand_probe,
@@ -802,7 +813,7 @@
static void __init balloon3_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
}
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4bd7a3c..4284513 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -149,7 +149,7 @@
MACHINE_START(CAPC7117,
"Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = capc7117_init
diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c
new file mode 100644
index 0000000..1ce0904
--- /dev/null
+++ b/arch/arm/mach-pxa/clock-pxa2xx.c
@@ -0,0 +1,64 @@
+/*
+ * linux/arch/arm/mach-pxa/clock-pxa2xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <mach/pxa2xx-regs.h>
+
+#include "clock.h"
+
+void clk_pxa2xx_cken_enable(struct clk *clk)
+{
+ CKEN |= 1 << clk->cken;
+}
+
+void clk_pxa2xx_cken_disable(struct clk *clk)
+{
+ CKEN &= ~(1 << clk->cken);
+}
+
+const struct clkops clk_pxa2xx_cken_ops = {
+ .enable = clk_pxa2xx_cken_enable,
+ .disable = clk_pxa2xx_cken_disable,
+};
+
+#ifdef CONFIG_PM
+static uint32_t saved_cken;
+
+static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state)
+{
+ saved_cken = CKEN;
+ return 0;
+}
+
+static int pxa2xx_clock_resume(struct sys_device *d)
+{
+ CKEN = saved_cken;
+ return 0;
+}
+#else
+#define pxa2xx_clock_suspend NULL
+#define pxa2xx_clock_resume NULL
+#endif
+
+struct sysdev_class pxa2xx_clock_sysclass = {
+ .name = "pxa2xx-clock",
+ .suspend = pxa2xx_clock_suspend,
+ .resume = pxa2xx_clock_resume,
+};
+
+static int __init pxa2xx_clock_init(void)
+{
+ if (cpu_is_pxa2xx())
+ return sysdev_class_register(&pxa2xx_clock_sysclass);
+ return 0;
+}
+postcore_initcall(pxa2xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
new file mode 100644
index 0000000..1b08a34
--- /dev/null
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -0,0 +1,218 @@
+/*
+ * linux/arch/arm/mach-pxa/clock-pxa3xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "clock.h"
+
+/* Crystal clock: 13MHz */
+#define BASE_CLK 13000000
+
+/* Ring Oscillator Clock: 60MHz */
+#define RO_CLK 60000000
+
+#define ACCR_D0CS (1 << 26)
+#define ACCR_PCCE (1 << 11)
+
+/* crystal frequency to HSIO bus frequency multiplier (HSS) */
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa3xx_get_clk_frequency_khz(int info)
+{
+ unsigned long acsr, xclkcfg;
+ unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
+
+ /* Read XCLKCFG register turbo bit */
+ __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+ t = xclkcfg & 0x1;
+
+ acsr = ACSR;
+
+ xl = acsr & 0x1f;
+ xn = (acsr >> 8) & 0x7;
+ hss = (acsr >> 14) & 0x3;
+
+ XL = xl * BASE_CLK;
+ XN = xn * XL;
+
+ ro = acsr & ACCR_D0CS;
+
+ CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
+ HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+ if (info) {
+ pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
+ RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
+ (ro) ? "" : "in");
+ pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
+ XL / 1000000, (XL % 1000000) / 10000, xl);
+ pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
+ XN / 1000000, (XN % 1000000) / 10000, xn,
+ (t) ? "" : "in");
+ pr_info("HSIO bus clock: %d.%02dMHz\n",
+ HSS / 1000000, (HSS % 1000000) / 10000);
+ }
+
+ return CLK / 1000;
+}
+
+/*
+ * Return the current AC97 clock frequency.
+ */
+static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
+{
+ unsigned long rate = 312000000;
+ unsigned long ac97_div;
+
+ ac97_div = AC97_DIV;
+
+ /* This may loose precision for some rates but won't for the
+ * standard 24.576MHz.
+ */
+ rate /= (ac97_div >> 12) & 0x7fff;
+ rate *= (ac97_div & 0xfff);
+
+ return rate;
+}
+
+/*
+ * Return the current HSIO bus clock frequency
+ */
+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
+{
+ unsigned long acsr;
+ unsigned int hss, hsio_clk;
+
+ acsr = ACSR;
+
+ hss = (acsr >> 14) & 0x3;
+ hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+ return hsio_clk;
+}
+
+/* crystal frequency to static memory controller multiplier (SMCFS) */
+static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
+static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
+
+static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk)
+{
+ unsigned long acsr = ACSR;
+ unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
+ unsigned int smcfs = (acsr >> 23) & 0x7;
+
+ return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] /
+ df_clkdiv[(memclkcfg >> 16) & 0x3];
+}
+
+void clk_pxa3xx_cken_enable(struct clk *clk)
+{
+ unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+ if (clk->cken < 32)
+ CKENA |= mask;
+ else
+ CKENB |= mask;
+}
+
+void clk_pxa3xx_cken_disable(struct clk *clk)
+{
+ unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+ if (clk->cken < 32)
+ CKENA &= ~mask;
+ else
+ CKENB &= ~mask;
+}
+
+const struct clkops clk_pxa3xx_cken_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+};
+
+const struct clkops clk_pxa3xx_hsio_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+ .getrate = clk_pxa3xx_hsio_getrate,
+};
+
+const struct clkops clk_pxa3xx_ac97_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+ .getrate = clk_pxa3xx_ac97_getrate,
+};
+
+const struct clkops clk_pxa3xx_smemc_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+ .getrate = clk_pxa3xx_smemc_getrate,
+};
+
+static void clk_pout_enable(struct clk *clk)
+{
+ OSCC |= OSCC_PEN;
+}
+
+static void clk_pout_disable(struct clk *clk)
+{
+ OSCC &= ~OSCC_PEN;
+}
+
+const struct clkops clk_pxa3xx_pout_ops = {
+ .enable = clk_pout_enable,
+ .disable = clk_pout_disable,
+};
+
+#ifdef CONFIG_PM
+static uint32_t cken[2];
+static uint32_t accr;
+
+static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
+{
+ cken[0] = CKENA;
+ cken[1] = CKENB;
+ accr = ACCR;
+ return 0;
+}
+
+static int pxa3xx_clock_resume(struct sys_device *d)
+{
+ ACCR = accr;
+ CKENA = cken[0];
+ CKENB = cken[1];
+ return 0;
+}
+#else
+#define pxa3xx_clock_suspend NULL
+#define pxa3xx_clock_resume NULL
+#endif
+
+struct sysdev_class pxa3xx_clock_sysclass = {
+ .name = "pxa3xx-clock",
+ .suspend = pxa3xx_clock_suspend,
+ .resume = pxa3xx_clock_resume,
+};
+
+static int __init pxa3xx_clock_init(void)
+{
+ if (cpu_is_pxa3xx() || cpu_is_pxa95x())
+ return sysdev_class_register(&pxa3xx_clock_sysclass);
+ return 0;
+}
+postcore_initcall(pxa3xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 4e4a84b..d515222 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -3,21 +3,11 @@
*/
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
-#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/clkdev.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/hardware.h>
-
-#include "devices.h"
-#include "generic.h"
#include "clock.h"
static DEFINE_SPINLOCK(clocks_lock);
@@ -63,18 +53,19 @@
}
EXPORT_SYMBOL(clk_get_rate);
-
-void clk_cken_enable(struct clk *clk)
+void clk_dummy_enable(struct clk *clk)
{
- CKEN |= 1 << clk->cken;
}
-void clk_cken_disable(struct clk *clk)
+void clk_dummy_disable(struct clk *clk)
{
- CKEN &= ~(1 << clk->cken);
}
-const struct clkops clk_cken_ops = {
- .enable = clk_cken_enable,
- .disable = clk_cken_disable,
+const struct clkops clk_dummy_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+};
+
+struct clk clk_dummy = {
+ .ops = &clk_dummy_ops,
};
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 12cc0e8..f9f349a 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,4 +1,5 @@
#include <linux/clkdev.h>
+#include <linux/sysdev.h>
struct clkops {
void (*enable)(struct clk *);
@@ -14,6 +15,12 @@
unsigned int enabled;
};
+void clk_dummy_enable(struct clk *);
+void clk_dummy_disable(struct clk *);
+
+extern const struct clkops clk_dummy_ops;
+extern struct clk clk_dummy;
+
#define INIT_CLKREG(_clk,_devname,_conname) \
{ \
.clk = _clk, \
@@ -21,14 +28,6 @@
.con_id = _conname, \
}
-#define DEFINE_CKEN(_name, _cken, _rate, _delay) \
-struct clk clk_##_name = { \
- .ops = &clk_cken_ops, \
- .rate = _rate, \
- .cken = CKEN_##_cken, \
- .delay = _delay, \
- }
-
#define DEFINE_CK(_name, _cken, _ops) \
struct clk clk_##_name = { \
.ops = _ops, \
@@ -42,12 +41,22 @@
.delay = _delay, \
}
-extern const struct clkops clk_cken_ops;
+#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay) \
+struct clk clk_##_name = { \
+ .ops = &clk_pxa2xx_cken_ops, \
+ .rate = _rate, \
+ .cken = CKEN_##_cken, \
+ .delay = _delay, \
+ }
-void clk_cken_enable(struct clk *clk);
-void clk_cken_disable(struct clk *clk);
+extern const struct clkops clk_pxa2xx_cken_ops;
-#ifdef CONFIG_PXA3xx
+void clk_pxa2xx_cken_enable(struct clk *clk);
+void clk_pxa2xx_cken_disable(struct clk *clk);
+
+extern struct sysdev_class pxa2xx_clock_sysclass;
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
struct clk clk_##_name = { \
.ops = &clk_pxa3xx_cken_ops, \
@@ -56,14 +65,14 @@
.delay = _delay, \
}
-#define DEFINE_PXA3_CK(_name, _cken, _ops) \
-struct clk clk_##_name = { \
- .ops = _ops, \
- .cken = CKEN_##_cken, \
- }
-
extern const struct clkops clk_pxa3xx_cken_ops;
+extern const struct clkops clk_pxa3xx_hsio_ops;
+extern const struct clkops clk_pxa3xx_ac97_ops;
+extern const struct clkops clk_pxa3xx_pout_ops;
+extern const struct clkops clk_pxa3xx_smemc_ops;
+
extern void clk_pxa3xx_cken_enable(struct clk *);
extern void clk_pxa3xx_cken_disable(struct clk *);
-#endif
+extern struct sysdev_class pxa3xx_clock_sysclass;
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index d34b99f..b734d84 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -24,6 +24,7 @@
#include <mach/pxa2xx-regs.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
+#include <mach/smemc.h>
#include <asm/hardware/it8152.h>
@@ -392,9 +393,9 @@
cmx2xx_pci_suspend();
/* save MSC registers */
- sleep_save_msc[0] = MSC0;
- sleep_save_msc[1] = MSC1;
- sleep_save_msc[2] = MSC2;
+ sleep_save_msc[0] = __raw_readl(MSC0);
+ sleep_save_msc[1] = __raw_readl(MSC1);
+ sleep_save_msc[2] = __raw_readl(MSC2);
/* setup power saving mode registers */
PCFR = 0x0;
@@ -416,9 +417,9 @@
cmx2xx_pci_resume();
/* restore MSC registers */
- MSC0 = sleep_save_msc[0];
- MSC1 = sleep_save_msc[1];
- MSC2 = sleep_save_msc[2];
+ __raw_writel(sleep_save_msc[0], MSC0);
+ __raw_writel(sleep_save_msc[1], MSC1);
+ __raw_writel(sleep_save_msc[2], MSC2);
return 0;
}
@@ -498,7 +499,12 @@
static void __init cmx2xx_map_io(void)
{
- pxa_map_io();
+ if (cpu_is_pxa25x())
+ pxa25x_map_io();
+
+ if (cpu_is_pxa27x())
+ pxa27x_map_io();
+
iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
it8152_base_address = CMX2XX_IT8152_VIRT;
@@ -506,7 +512,11 @@
#else
static void __init cmx2xx_map_io(void)
{
- pxa_map_io();
+ if (cpu_is_pxa25x())
+ pxa25x_map_io();
+
+ if (cpu_is_pxa27x())
+ pxa27x_map_io();
}
#endif
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 922b107..7984268 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -857,7 +857,7 @@
MACHINE_START(CM_X300, "CM-X300 module")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = cm_x300_init,
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
new file mode 100644
index 0000000..6b2c800
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -0,0 +1,121 @@
+/*
+ * linux/arch/arm/mach-pxa/colibri-evalboard.c
+ *
+ * Support for Toradex Colibri Evaluation Carrier Board
+ * Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+#include <linux/i2c.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_ro = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init colibri_mmc_init(void)
+{
+ if (machine_is_colibri()) /* PXA270 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO0_COLIBRI_PXA270_SD_DETECT;
+ if (machine_is_colibri300()) /* PXA300 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO39_COLIBRI_PXA300_SD_DETECT;
+ else /* PXA320 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO28_COLIBRI_PXA320_SD_DETECT;
+
+ pxa_set_mci_info(&colibri_mci_platform_data);
+}
+#else
+static inline void colibri_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_ohci_init(struct device *dev)
+{
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+ return 0;
+}
+
+static struct pxaohci_platform_data colibri_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = colibri_ohci_init,
+};
+
+static void __init colibri_uhc_init(void)
+{
+ /* Colibri PXA270 has two usb ports, TBA for 320 */
+ if (machine_is_colibri())
+ colibri_ohci_info.flags |= ENABLE_PORT2;
+
+ pxa_set_ohci_info(&colibri_ohci_info);
+}
+#else
+static inline void colibri_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata colibri_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("m41t00", 0x68),
+ },
+};
+
+static void __init colibri_rtc_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
+}
+#else
+static inline void colibri_rtc_init(void) {}
+#endif
+
+void __init colibri_evalboard_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ colibri_mmc_init();
+ colibri_uhc_init();
+ colibri_rtc_init();
+}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
deleted file mode 100644
index 0f3b632..0000000
--- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
- *
- * Support for Toradex PXA270 based Colibri Evaluation Carrier Board
- * Daniel Mack <daniel@caiaq.de>
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
- GPIO0_GPIO, /* SD detect */
-
- /* FFUART */
- GPIO39_FFUART_TXD,
- GPIO34_FFUART_RXD,
-
- /* UHC */
- GPIO88_USBH1_PWR,
- GPIO89_USBH1_PEN,
- GPIO119_USBH2_PWR,
- GPIO120_USBH2_PEN,
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_power = -1,
- .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT,
- .gpio_card_ro = -1,
- .detect_delay_ms = 200,
-};
-
-static void __init colibri_pxa270_mmc_init(void)
-{
- pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
-}
-#else
-static inline void colibri_pxa270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_pxa270_ohci_init(struct device *dev)
-{
- UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
- return 0;
-}
-
-static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
- .port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT2 |
- POWER_CONTROL_LOW | POWER_SENSE_LOW,
- .init = colibri_pxa270_ohci_init,
-};
-
-static void __init colibri_pxa270_uhc_init(void)
-{
- pxa_set_ohci_info(&colibri_pxa270_ohci_info);
-}
-#else
-static inline void colibri_pxa270_uhc_init(void) {}
-#endif
-
-void __init colibri_pxa270_evalboard_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
- colibri_pxa270_mmc_init();
- colibri_pxa270_uhc_init();
-}
-
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 37f0f3e..07b62a0 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -46,52 +46,6 @@
#define GPIO113_INCOME_TS_IRQ (113)
/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t income_pin_config[] __initdata = {
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
- GPIO0_GPIO, /* SD detect */
- GPIO1_GPIO, /* SD read-only */
-
- /* FFUART */
- GPIO39_FFUART_TXD,
- GPIO34_FFUART_RXD,
-
- /* BFUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO45_BTUART_RTS,
-
- /* STUART */
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-
- /* UHC */
- GPIO88_USBH1_PWR,
- GPIO89_USBH1_PEN,
-
- /* LCD */
- GPIOxx_LCD_TFT_16BPP,
-
- /* PWM */
- GPIO16_PWM0_OUT,
-
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-
- /* LED */
- GPIO54_GPIO, /* LED A */
- GPIO55_GPIO, /* LED B */
-};
-
-/******************************************************************************
* SD/MMC card controller
******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
@@ -257,7 +211,6 @@
void __init colibri_pxa270_income_boardinit(void)
{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index bc04510..6fc5d32 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -33,6 +33,103 @@
#include "generic.h"
/******************************************************************************
+ * Evaluation board MFP
+ ******************************************************************************/
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+
+ /* PCMCIA */
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO49_nPWE,
+ GPIO48_nPOE,
+ GPIO57_nIOIS16,
+ GPIO56_nPWAIT,
+ GPIO104_PSKTSEL,
+ GPIO53_GPIO, /* RESET */
+ GPIO83_GPIO, /* BVD1 */
+ GPIO82_GPIO, /* BVD2 */
+ GPIO1_GPIO, /* READY */
+ GPIO84_GPIO, /* DETECT */
+ GPIO107_GPIO, /* PPEN */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
+#endif
+
+#ifdef CONFIG_MACH_COLIBRI_PXA270_INCOME
+static mfp_cfg_t income_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+ GPIO1_GPIO, /* SD read-only */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* BFUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* LED */
+ GPIO54_GPIO, /* LED A */
+ GPIO55_GPIO, /* LED B */
+};
+#else
+static mfp_cfg_t income_pin_config[] __initdata = {};
+#endif
+
+/******************************************************************************
* Pin configuration
******************************************************************************/
static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
@@ -184,10 +281,13 @@
colibri_pxa270_tsc_init();
switch (colibri_pxa270_baseboard) {
- case COLIBRI_PXA270_EVALBOARD:
- colibri_pxa270_evalboard_init();
+ case COLIBRI_EVALBOARD:
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(
+ colibri_pxa270_evalboard_pin_config));
+ colibri_evalboard_init();
break;
case COLIBRI_PXA270_INCOME:
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
colibri_pxa270_income_boardinit();
break;
default:
@@ -209,7 +309,7 @@
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa270_init,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
@@ -217,7 +317,7 @@
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
.boot_params = 0xa0000100,
.init_machine = colibri_pxa270_income_init,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index a70b256..fddb16d 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -31,9 +31,38 @@
#include "generic.h"
#include "devices.h"
+
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO7_MMC1_CLK,
+ GPIO14_MMC1_CMD,
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO39_GPIO, /* SD detect */
+
+ /* UHC */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+ GPIO77_USB_P3_1,
+ GPIO78_USB_P3_2,
+ GPIO79_USB_P3_3,
+ GPIO80_USB_P3_4,
+ GPIO81_USB_P3_5,
+ GPIO82_USB_P3_6,
+
+ /* I2C */
+ GPIO21_I2C_SCL,
+ GPIO22_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
+#endif
+
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
-
/*
* Asix AX88796 Ethernet
*/
@@ -80,35 +109,6 @@
static inline void __init colibri_pxa300_init_eth(void) {}
#endif /* CONFIG_AX88796 */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
- GPIO0_2_USBH_PEN,
- GPIO1_2_USBH_PWR,
-};
-
-static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
- .port_mode = PMM_GLOBAL_MODE,
- .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-void __init colibri_pxa300_init_ohci(void)
-{
- pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
- pxa_set_ohci_info(&colibri_pxa300_ohci_info);
-}
-#else
-static inline void colibri_pxa300_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
-static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
- GPIO7_MMC1_CLK,
- GPIO14_MMC1_CMD,
- GPIO3_MMC1_DAT0,
- GPIO4_MMC1_DAT1,
- GPIO5_MMC1_DAT2,
- GPIO6_MMC1_DAT3,
-};
-
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
GPIO54_LCD_LDD_0,
@@ -171,24 +171,21 @@
void __init colibri_pxa300_init(void)
{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
colibri_pxa300_init_eth();
- colibri_pxa300_init_ohci();
colibri_pxa3xx_init_nand();
colibri_pxa300_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
colibri_pxa310_init_ac97();
- colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
- mfp_to_gpio(MFP_PIN_GPIO13));
+
+ /* Evalboard init */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
+ colibri_evalboard_init();
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa300_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ca5f29e..ff9ff5f 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -35,9 +35,72 @@
#include "generic.h"
#include "devices.h"
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO28_GPIO, /* SD detect */
+
+ /* UART 1 configuration (may be set by bootloader) */
+ GPIO99_UART1_CTS,
+ GPIO104_UART1_RTS,
+ GPIO97_UART1_RXD,
+ GPIO98_UART1_TXD,
+ GPIO101_UART1_DTR,
+ GPIO103_UART1_DSR,
+ GPIO100_UART1_DCD,
+ GPIO102_UART1_RI,
+
+ /* UART 2 configuration */
+ GPIO109_UART2_CTS,
+ GPIO112_UART2_RTS,
+ GPIO110_UART2_RXD,
+ GPIO111_UART2_TXD,
+
+ /* UART 3 configuration */
+ GPIO30_UART3_RXD,
+ GPIO31_UART3_TXD,
+
+ /* UHC */
+ GPIO2_2_USBH_PEN,
+ GPIO3_2_USBH_PWR,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* PCMCIA */
+ MFP_CFG(GPIO59, AF7), /* PRST ; AF7 to tristate */
+ MFP_CFG(GPIO61, AF7), /* PCE1 ; AF7 to tristate */
+ MFP_CFG(GPIO60, AF7), /* PCE2 ; AF7 to tristate */
+ MFP_CFG(GPIO62, AF7), /* PCD ; AF7 to tristate */
+ MFP_CFG(GPIO56, AF7), /* PSKTSEL ; AF7 to tristate */
+ GPIO27_GPIO, /* RDnWR ; input/tristate */
+ GPIO50_GPIO, /* PREG ; input/tristate */
+ GPIO2_RDY,
+ GPIO5_NPIOR,
+ GPIO6_NPIOW,
+ GPIO7_NPIOS16,
+ GPIO8_NPWAIT,
+ GPIO29_GPIO, /* PRDY (READY GPIO) */
+ GPIO57_GPIO, /* PPEN (POWER GPIO) */
+ GPIO81_GPIO, /* PCD (DETECT GPIO) */
+ GPIO77_GPIO, /* PRST (RESET GPIO) */
+ GPIO53_GPIO, /* PBVD1 */
+ GPIO79_GPIO, /* PBVD2 */
+ GPIO54_GPIO, /* POE */
+};
+#else
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
+#endif
+
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO)
-
/*
* Asix AX88796 Ethernet
*/
@@ -84,26 +147,6 @@
static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
- GPIO2_2_USBH_PEN,
- GPIO3_2_USBH_PWR,
-};
-
-static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
- .port_mode = PMM_GLOBAL_MODE,
- .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-void __init colibri_pxa320_init_ohci(void)
-{
- pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
- pxa_set_ohci_info(&colibri_pxa320_ohci_info);
-}
-#else
-static inline void colibri_pxa320_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
.gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
@@ -140,15 +183,6 @@
static inline void colibri_pxa320_init_udc(void) {}
#endif
-static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
- GPIO22_MMC1_CLK,
- GPIO23_MMC1_CMD,
- GPIO18_MMC1_DAT0,
- GPIO19_MMC1_DAT1,
- GPIO20_MMC1_DAT2,
- GPIO21_MMC1_DAT3
-};
-
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
GPIO6_2_LCD_LDD_0,
@@ -205,59 +239,24 @@
static inline void colibri_pxa320_init_ac97(void) {}
#endif
-/*
- * The following configuration is verified to work with the Toradex Orchid
- * carrier board
- */
-static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
- /* UART 1 configuration (may be set by bootloader) */
- GPIO99_UART1_CTS,
- GPIO104_UART1_RTS,
- GPIO97_UART1_RXD,
- GPIO98_UART1_TXD,
- GPIO101_UART1_DTR,
- GPIO103_UART1_DSR,
- GPIO100_UART1_DCD,
- GPIO102_UART1_RI,
-
- /* UART 2 configuration */
- GPIO109_UART2_CTS,
- GPIO112_UART2_RTS,
- GPIO110_UART2_RXD,
- GPIO111_UART2_TXD,
-
- /* UART 3 configuration */
- GPIO30_UART3_RXD,
- GPIO31_UART3_TXD,
-};
-
-static void __init colibri_pxa320_init_uart(void)
-{
- pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
-}
-
void __init colibri_pxa320_init(void)
{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
colibri_pxa320_init_eth();
- colibri_pxa320_init_ohci();
colibri_pxa3xx_init_nand();
colibri_pxa320_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
colibri_pxa320_init_ac97();
- colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
- mfp_to_gpio(MFP_PIN_GPIO28));
- colibri_pxa320_init_uart();
colibri_pxa320_init_udc();
+
+ /* Evalboard init */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
+ colibri_evalboard_init();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa320_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 199afa2..96b2d9f 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -64,55 +64,6 @@
}
#endif
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int mmc_detect_pin;
-
-static int colibri_pxa3xx_mci_init(struct device *dev,
- irq_handler_t colibri_mmc_detect_int,
- void *data)
-{
- int ret;
-
- ret = gpio_request(mmc_detect_pin, "mmc card detect");
- if (ret)
- return ret;
-
- gpio_direction_input(mmc_detect_pin);
- ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (ret) {
- gpio_free(mmc_detect_pin);
- return ret;
- }
-
- return 0;
-}
-
-static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
-{
- free_irq(mmc_detect_pin, data);
- gpio_free(gpio_to_irq(mmc_detect_pin));
-}
-
-static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
- .detect_delay_ms = 200,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = colibri_pxa3xx_mci_init,
- .exit = colibri_pxa3xx_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
-};
-
-void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
-{
- pxa3xx_mfp_config(pins, len);
- mmc_detect_pin = detect_pin;
- pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
-}
-#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
-
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static int lcd_bl_pin;
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 821229ac..9f3e5af 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -721,7 +721,7 @@
#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
@@ -731,7 +731,7 @@
#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
@@ -741,7 +741,7 @@
#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 58093d9..6a7aeab 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -38,8 +38,10 @@
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
+#include <linux/io.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/smemc.h>
#ifdef DEBUG
static unsigned int freq_debug;
@@ -242,7 +244,7 @@
static void init_sdram_rows(void)
{
- uint32_t mdcnfg = MDCNFG;
+ uint32_t mdcnfg = __raw_readl(MDCNFG);
unsigned int drac2 = 0, drac0 = 0;
if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
@@ -331,8 +333,8 @@
* we need to preset the smaller DRI before the change. If we're
* speeding up we need to set the larger DRI value after the change.
*/
- preset_mdrefr = postset_mdrefr = MDREFR;
- if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+ preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
+ if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
preset_mdrefr |= mdrefr_dri(new_freq_mem);
}
@@ -370,7 +372,7 @@
3: nop \n\
"
: "=&r" (unused)
- : "r" (&MDREFR), "r" (cclkcfg),
+ : "r" (MDREFR), "r" (cclkcfg),
"r" (preset_mdrefr), "r" (postset_mdrefr)
: "r4", "r5");
local_irq_restore(flags);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 57cacaf..a305424 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -27,6 +27,7 @@
#include <mach/ohci.h>
#include <mach/pxa2xx-regs.h>
#include <mach/audio.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -255,9 +256,9 @@
static void __init csb726_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/* MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
-/* MSC2 = 0x06697ff4; *//* none/SM501 */
- MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+/* __raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/* __raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+ __raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
@@ -273,7 +274,7 @@
MACHINE_START(CSB726, "Cogent CSB726")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = csb726_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index aaa1166..022c2fa 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -342,27 +342,6 @@
};
#endif
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_i2c_power[] = {
- {
- .start = 0x40f500c0,
- .end = 0x40f500d3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
- .name = "pxa3xx-pwri2c",
- .id = 1,
- .resource = pxa3xx_resources_i2c_power,
- .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-#endif
-
static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
@@ -633,30 +612,35 @@
#endif /* CONFIG_PXA25x */
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-static struct resource pxa27x_resource_keypad[] = {
+static struct resource pxa27x_resource_camera[] = {
[0] = {
- .start = 0x41500000,
- .end = 0x4150004c,
+ .start = 0x50000000,
+ .end = 0x50000fff,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_KEYPAD,
- .end = IRQ_KEYPAD,
+ .start = IRQ_CAMERA,
+ .end = IRQ_CAMERA,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device pxa27x_device_keypad = {
- .name = "pxa27x-keypad",
- .id = -1,
- .resource = pxa27x_resource_keypad,
- .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
+static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
+
+static struct platform_device pxa27x_device_camera = {
+ .name = "pxa27x-camera",
+ .id = 0, /* This is used to put cameras on this interface */
+ .dev = {
+ .dma_mask = &pxa27x_dma_mask_camera,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
+ .resource = pxa27x_resource_camera,
};
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
{
- pxa_register_device(&pxa27x_device_keypad, info);
+ pxa_register_device(&pxa27x_device_camera, info);
}
static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
@@ -689,6 +673,33 @@
{
pxa_register_device(&pxa27x_device_ohci, info);
}
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa27x_resource_keypad[] = {
+ [0] = {
+ .start = 0x41500000,
+ .end = 0x4150004c,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KEYPAD,
+ .end = IRQ_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_keypad = {
+ .name = "pxa27x-keypad",
+ .id = -1,
+ .resource = pxa27x_resource_keypad,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
+};
+
+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+{
+ pxa_register_device(&pxa27x_device_keypad, info);
+}
static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
@@ -833,79 +844,9 @@
.resource = pxa27x_resource_pwm1,
.num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
};
-
-static struct resource pxa27x_resource_camera[] = {
- [0] = {
- .start = 0x50000000,
- .end = 0x50000fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CAMERA,
- .end = IRQ_CAMERA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
- .name = "pxa27x-camera",
- .id = 0, /* This is used to put cameras on this interface */
- .dev = {
- .dma_mask = &pxa27x_dma_mask_camera,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
- .resource = pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
- pxa_register_device(&pxa27x_device_camera, info);
-}
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
#ifdef CONFIG_PXA3xx
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
- [0] = {
- .start = 0x41a00000,
- .end = 0x41a0003f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SSP4,
- .end = IRQ_SSP4,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* DRCMR for RX */
- .start = 2,
- .end = 2,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 3,
- .end = 3,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
- /* PXA3xx SSP is basically equivalent to PXA27x */
- .name = "pxa27x-ssp",
- .id = 3,
- .dev = {
- .dma_mask = &pxa3xx_ssp4_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = pxa3xx_resource_ssp4,
- .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-
static struct resource pxa3xx_resources_mci2[] = {
[0] = {
.start = 0x42000000,
@@ -984,6 +925,54 @@
pxa_register_device(&pxa3xx_device_mci3, info);
}
+static struct resource pxa3xx_resources_gcu[] = {
+ {
+ .start = 0x54000000,
+ .end = 0x54000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_GCU,
+ .end = IRQ_GCU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+ .name = "pxa3xx-gcu",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
+ .resource = pxa3xx_resources_gcu,
+ .dev = {
+ .dma_mask = &pxa3xx_gcu_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+#endif /* CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa3xx_resources_i2c_power[] = {
+ {
+ .start = 0x40f500c0,
+ .end = 0x40f500d3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+ .name = "pxa3xx-pwri2c",
+ .id = 1,
+ .resource = pxa3xx_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+
static struct resource pxa3xx_resources_nand[] = {
[0] = {
.start = 0x43100000,
@@ -1027,33 +1016,45 @@
pxa_register_device(&pxa3xx_device_nand, info);
}
-static struct resource pxa3xx_resources_gcu[] = {
- {
- .start = 0x54000000,
- .end = 0x54000fff,
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+ [0] = {
+ .start = 0x41a00000,
+ .end = 0x41a0003f,
.flags = IORESOURCE_MEM,
},
- {
- .start = IRQ_GCU,
- .end = IRQ_GCU,
+ [1] = {
+ .start = IRQ_SSP4,
+ .end = IRQ_SSP4,
.flags = IORESOURCE_IRQ,
},
-};
-
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
- .name = "pxa3xx-gcu",
- .id = -1,
- .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
- .resource = pxa3xx_resources_gcu,
- .dev = {
- .dma_mask = &pxa3xx_gcu_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ [2] = {
+ /* DRCMR for RX */
+ .start = 2,
+ .end = 2,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 3,
+ .end = 3,
+ .flags = IORESOURCE_DMA,
},
};
-#endif /* CONFIG_PXA3xx */
+struct platform_device pxa3xx_device_ssp4 = {
+ /* PXA3xx SSP is basically equivalent to PXA27x */
+ .name = "pxa27x-ssp",
+ .id = 3,
+ .dev = {
+ .dma_mask = &pxa3xx_ssp4_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa3xx_resource_ssp4,
+ .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
+};
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index ed0dbfdb..4cefd1d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1300,7 +1300,7 @@
MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
@@ -1308,7 +1308,7 @@
MACHINE_START(EXEDA, "Compulab eXeda")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index b25690c..edca0a0 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -181,7 +181,7 @@
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -230,7 +230,7 @@
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -352,7 +352,7 @@
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -540,7 +540,7 @@
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -731,7 +731,7 @@
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -926,7 +926,7 @@
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 142c711f4..87cec0a 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -798,7 +798,7 @@
MACHINE_START(EZX_A780, "Motorola EZX A780")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -863,7 +863,7 @@
MACHINE_START(EZX_E680, "Motorola EZX E680")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -928,7 +928,7 @@
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -1118,7 +1118,7 @@
MACHINE_START(EZX_A910, "Motorola EZX A910")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -1183,7 +1183,7 @@
MACHINE_START(EZX_E6, "Motorola EZX E6")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -1222,7 +1222,7 @@
MACHINE_START(EZX_E2, "Motorola EZX E2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 6451e9c..d6e15f7 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -28,6 +28,8 @@
#include <mach/reset.h>
#include <mach/gpio.h>
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
#include "generic.h"
@@ -35,9 +37,10 @@
{
if (cpu_is_pxa2xx())
pxa2xx_clear_reset_status(mask);
-
- if (cpu_is_pxa3xx())
- pxa3xx_clear_reset_status(mask);
+ else {
+ /* RESET_STATUS_* has a 1:1 mapping with ARSR */
+ ARSR = mask;
+ }
}
unsigned long get_clock_tick_rate(void)
@@ -71,47 +74,17 @@
EXPORT_SYMBOL(get_clk_frequency_khz);
/*
- * Return the current memory clock frequency in units of 10kHz
- */
-unsigned int get_memclk_frequency_10khz(void)
-{
- if (cpu_is_pxa25x())
- return pxa25x_get_memclk_frequency_10khz();
- else if (cpu_is_pxa27x())
- return pxa27x_get_memclk_frequency_10khz();
- return 0;
-}
-EXPORT_SYMBOL(get_memclk_frequency_10khz);
-
-/*
* Intel PXA2xx internal register mapping.
*
- * Note 1: not all PXA2xx variants implement all those addresses.
- *
- * Note 2: virtual 0xfffe0000-0xffffffff is reserved for the vector table
- * and cache flush area.
+ * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
+ * and cache flush area.
*/
-static struct map_desc standard_io_desc[] __initdata = {
+static struct map_desc common_io_desc[] __initdata = {
{ /* Devs */
.virtual = 0xf2000000,
.pfn = __phys_to_pfn(0x40000000),
.length = 0x02000000,
.type = MT_DEVICE
- }, { /* Mem Ctl */
- .virtual = 0xf6000000,
- .pfn = __phys_to_pfn(0x48000000),
- .length = 0x00200000,
- .type = MT_DEVICE
- }, { /* Camera */
- .virtual = 0xfa000000,
- .pfn = __phys_to_pfn(0x50000000),
- .length = 0x00100000,
- .type = MT_DEVICE
- }, { /* IMem ctl */
- .virtual = 0xfe000000,
- .pfn = __phys_to_pfn(0x58000000),
- .length = 0x00100000,
- .type = MT_DEVICE
}, { /* UNCACHED_PHYS_0 */
.virtual = 0xff000000,
.pfn = __phys_to_pfn(0x00000000),
@@ -122,6 +95,5 @@
void __init pxa_map_io(void)
{
- iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
- get_clk_frequency_khz(1);
+ iotable_init(ARRAY_AND_SIZE(common_io_desc));
}
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 4b1ad27..6205dc9 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -20,7 +20,12 @@
#endif
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
+extern void __init pxa95x_init_irq(void);
+
extern void __init pxa_map_io(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa27x_map_io(void);
+extern void __init pxa3xx_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
@@ -32,18 +37,14 @@
#ifdef CONFIG_PXA25x
extern unsigned pxa25x_get_clk_frequency_khz(int);
-extern unsigned pxa25x_get_memclk_frequency_10khz(void);
#else
#define pxa25x_get_clk_frequency_khz(x) (0)
-#define pxa25x_get_memclk_frequency_10khz() (0)
#endif
#ifdef CONFIG_PXA27x
extern unsigned pxa27x_get_clk_frequency_khz(int);
-extern unsigned pxa27x_get_memclk_frequency_10khz(void);
#else
#define pxa27x_get_clk_frequency_khz(x) (0)
-#define pxa27x_get_memclk_frequency_10khz() (0)
#endif
#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
@@ -54,10 +55,8 @@
#ifdef CONFIG_PXA3xx
extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern void pxa3xx_clear_reset_status(unsigned int);
#else
#define pxa3xx_get_clk_frequency_khz(x) (0)
-static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
#endif
extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1e2a9a1..6fd319e 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -225,7 +225,7 @@
MACHINE_START(GUMSTIX, "Gumstix")
.boot_params = 0xa0000100, /* match u-boot bi_boot_params */
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = gumstix_init,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 7057a1f..657db46 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -32,6 +32,7 @@
#include <mach/pxa25x.h>
#include <mach/h5000.h>
#include <mach/udc.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -172,11 +173,11 @@
static void fix_msc(void)
{
- MSC0 = 0x129c24f2;
- MSC1 = 0x7ff424fa;
- MSC2 = 0x7ff47ff4;
+ __raw_writel(0x129c24f2, MSC0);
+ __raw_writel(0x7ff424fa, MSC1);
+ __raw_writel(0x7ff47ff4, MSC2);
- MDREFR |= 0x02080000;
+ __raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
}
/*
@@ -202,7 +203,7 @@
MACHINE_START(H5400, "HP iPAQ H5000")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 01b7f07..e8603eb 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -160,7 +160,7 @@
MACHINE_START(HIMALAYA, "HTC Himalaya")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = himalaya_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 76d93a2..cacb21b 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -871,7 +871,7 @@
MACHINE_START(H4700, "HP iPAQ HX4700")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = hx4700_init,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d51ee3d..ac6ee12 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -192,7 +192,7 @@
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = icontrol_init
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index e773dce..dd40e4a 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -187,7 +187,7 @@
static void __init idp_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
}
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
new file mode 100644
index 0000000..f4c0365
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -0,0 +1,48 @@
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/*
+ * Chip Selects
+ */
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
+#define PXA300_CS0_PHYS 0x00000000 /* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS 0x30000000 /* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS 0x10000000
+#define PXA3xx_CS3_PHYS 0x14000000
+
+/*
+ * Peripheral Bus
+ */
+#define PERIPH_PHYS 0x40000000
+#define PERIPH_VIRT 0xf2000000
+#define PERIPH_SIZE 0x02000000
+
+/*
+ * Static Memory Controller (w/ SDRAM controls on PXA25x/PXA27x)
+ */
+#define PXA2XX_SMEMC_PHYS 0x48000000
+#define PXA3XX_SMEMC_PHYS 0x4a000000
+#define SMEMC_VIRT 0xf6000000
+#define SMEMC_SIZE 0x00100000
+
+/*
+ * Dynamic Memory Controller (only on PXA3xx)
+ */
+#define DMEMC_PHYS 0x48100000
+#define DMEMC_VIRT 0xf6100000
+#define DMEMC_SIZE 0x00100000
+
+/*
+ * Internal Memory Controller (PXA27x and later)
+ */
+#define IMEMC_PHYS 0x58000000
+#define IMEMC_VIRT 0xfe000000
+#define IMEMC_SIZE 0x00100000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 561562b..7074e76 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -26,6 +26,8 @@
#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
+#define BALLOON3_FPGA_SETnCLR (0x1000)
+
/* FPGA / CPLD registers for CF socket */
#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
@@ -35,7 +37,7 @@
#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000)
#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
/* fpga/cpld interrupt control register */
@@ -174,7 +176,7 @@
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
-#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 4)
+#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16)
extern int balloon3_has(enum balloon3_features feature);
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 58dada1..388a96f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -9,14 +9,14 @@
*/
enum {
- COLIBRI_PXA270_EVALBOARD = 0,
+ COLIBRI_EVALBOARD = 0,
COLIBRI_PXA270_INCOME,
};
-#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
-extern void colibri_pxa270_evalboard_init(void);
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
#else
-static inline void colibri_pxa270_evalboard_init(void) {}
+static inline void colibri_evalboard_init(void) {}
#endif
#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
@@ -59,5 +59,11 @@
#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
+/* GPIO definitions for Colibri PXA300/310 */
+#define GPIO39_COLIBRI_PXA300_SD_DETECT 39
+
+/* GPIO definitions for Colibri PXA320 */
+#define GPIO28_COLIBRI_PXA320_SD_DETECT 28
+
#endif /* _COLIBRI_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 814f145..6957ba5 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
+#include <mach/addr-map.h>
+
/*
* Workarounds for at least 2 errata so far require this.
* The mapping is set in mach-pxa/generic.c.
@@ -193,14 +195,15 @@
#define __cpu_is_pxa935(id) (0)
#endif
-#ifdef CONFIG_CPU_PXA950
-#define __cpu_is_pxa950(id) \
- ({ \
+#ifdef CONFIG_CPU_PXA955
+#define __cpu_is_pxa955(id) \
+ ({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x697; \
- })
+ _id == 0x581 || _id == 0xc08 \
+ || _id == 0xb76; \
+ })
#else
-#define __cpu_is_pxa950(id) (0)
+#define __cpu_is_pxa955(id) (0)
#endif
#define cpu_is_pxa210() \
@@ -253,16 +256,15 @@
__cpu_is_pxa935(read_cpuid_id()); \
})
-#define cpu_is_pxa950() \
+#define cpu_is_pxa955() \
({ \
- __cpu_is_pxa950(read_cpuid_id()); \
- })
+ __cpu_is_pxa955(read_cpuid_id()); \
+ })
/*
* CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- * == 0x3 for pxa300/pxa310/pxa320
*/
#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
#define __cpu_is_pxa2xx(id) \
@@ -277,8 +279,10 @@
#ifdef CONFIG_PXA3xx
#define __cpu_is_pxa3xx(id) \
({ \
- unsigned int _id = (id) >> 13 & 0x7; \
- _id == 0x3; \
+ __cpu_is_pxa300(id) \
+ || __cpu_is_pxa310(id) \
+ || __cpu_is_pxa320(id) \
+ || __cpu_is_pxa93x(id); \
})
#else
#define __cpu_is_pxa3xx(id) (0)
@@ -287,13 +291,22 @@
#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
#define __cpu_is_pxa93x(id) \
({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x683 || _id == 0x693; \
+ __cpu_is_pxa930(id) \
+ || __cpu_is_pxa935(id); \
})
#else
#define __cpu_is_pxa93x(id) (0)
#endif
+#ifdef CONFIG_PXA95x
+#define __cpu_is_pxa95x(id) \
+ ({ \
+ __cpu_is_pxa955(id); \
+ })
+#else
+#define __cpu_is_pxa95x(id) (0)
+#endif
+
#define cpu_is_pxa2xx() \
({ \
__cpu_is_pxa2xx(read_cpuid_id()); \
@@ -308,6 +321,12 @@
({ \
__cpu_is_pxa93x(read_cpuid_id()); \
})
+
+#define cpu_is_pxa95x() \
+ ({ \
+ __cpu_is_pxa95x(read_cpuid_id()); \
+ })
+
/*
* return current memory and LCD clock frequency in units of 10kHz
*/
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index d372caa..a4285fc 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -21,16 +21,14 @@
#define PXA_IRQ(x) (PXA_ISA_IRQ_NUM + (x))
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */
-#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */
-#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI,PXA27x) */
+#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI,PXA27x) */
#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */
-#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */
+#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt (PXA27x) */
+#define IRQ_ACIPC0 PXA_IRQ(5) /* AP-CP Communication (PXA930) */
#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */
-#endif
-
#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */
#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */
#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */
@@ -38,7 +36,8 @@
#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */
#define IRQ_USB PXA_IRQ(11) /* USB Service */
#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */
-#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */
+#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt (PXA27x) */
+#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request (PXA3xx) */
#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */
#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */
#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */
@@ -47,6 +46,7 @@
#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */
#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */
#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */
+#define IRQ_ACIPC2 PXA_IRQ(19) /* AP-CP Communication (PXA930) */
#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */
#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */
#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/
@@ -60,19 +60,17 @@
#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */
#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */
#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
#define IRQ_COMM_WDT PXA_IRQ(35) /* Comm WDT interrupt */
#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
+#define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */
#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
-#define IRQ_GCU PXA_IRQ(39) /* Graphics Controller */
+#define IRQ_GCU PXA_IRQ(39) /* Graphics Controller (PXA3xx) */
+#define IRQ_ACIPC1 PXA_IRQ(40) /* AP-CP Communication (PXA930) */
#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
+#define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball (PXA930) */
#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */
@@ -80,30 +78,14 @@
#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */
#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */
#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
-#endif
-#ifdef CONFIG_CPU_PXA935
#define IRQ_U2O PXA_IRQ(64) /* USB OTG 2.0 Controller (PXA935) */
#define IRQ_U2H PXA_IRQ(65) /* USB Host 2.0 Controller (PXA935) */
-
-#define IRQ_MMC3_PXA935 PXA_IRQ(72) /* MMC3 Controller (PXA935) */
-#define IRQ_MMC4_PXA935 PXA_IRQ(73) /* MMC4 Controller (PXA935) */
-#define IRQ_MMC5_PXA935 PXA_IRQ(74) /* MMC5 Controller (PXA935) */
-
+#define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */
+#define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */
+#define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */
+#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */
-#define IRQ_ACIPC0 PXA_IRQ(5)
-#define IRQ_ACIPC1 PXA_IRQ(40)
-#define IRQ_ACIPC2 PXA_IRQ(19)
-#define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball */
-#endif
-
-#ifdef CONFIG_CPU_PXA950
-#define IRQ_GC500 PXA_IRQ(70) /* Graphics Controller (PXA950) */
-#endif
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
#define PXA_GPIO_IRQ_NUM (192)
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 4fcddd9..ee6ced1 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -17,72 +17,6 @@
#include <mach/hardware.h>
/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS 0x00000000
-#define PXA_CS1_PHYS 0x04000000
-#define PXA_CS2_PHYS 0x08000000
-#define PXA_CS3_PHYS 0x0C000000
-#define PXA_CS4_PHYS 0x10000000
-#define PXA_CS5_PHYS 0x14000000
-
-/*
- * Memory controller
- */
-
-#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
-#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
-#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
-#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
-#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
-#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
-#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
-#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
-#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
-#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
-#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
-
-#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
-#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
-#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-
-/*
* Power Manager
*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index e91d63c..e4fb4668 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -16,15 +16,6 @@
#include <mach/hardware.h>
/*
- * Static Chip Selects
- */
-
-#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */
-#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */
-#define PXA3xx_CS2_PHYS (0x10000000)
-#define PXA3xx_CS3_PHYS (0x14000000)
-
-/*
* Oscillator Configuration Register (OSCC)
*/
#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
index 68464ce..662288e 100644
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -27,8 +27,4 @@
#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */
#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */
-#define IPR(x) __REG(0x40D0001C + (x < 32 ? (x << 2) \
- : (x < 64 ? (0x94 + ((x - 32) << 2)) \
- : (0x128 + ((x - 64) << 2)))))
-
#endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
new file mode 100644
index 0000000..654adc9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -0,0 +1,74 @@
+/*
+ * Static memory controller register definitions for PXA CPUs
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SMEMC_REGS_H
+#define __SMEMC_REGS_H
+
+#define PXA2XX_SMEMC_BASE 0x48000000
+#define PXA3XX_SMEMC_BASE 0x4a000000
+#define SMEMC_VIRT 0xf6000000
+
+#define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */
+#define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */
+#define MSC0 (SMEMC_VIRT + 0x08) /* Static Memory Control Register 0 */
+#define MSC1 (SMEMC_VIRT + 0x0C) /* Static Memory Control Register 1 */
+#define MSC2 (SMEMC_VIRT + 0x10) /* Static Memory Control Register 2 */
+#define MECR (SMEMC_VIRT + 0x14) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR (SMEMC_VIRT + 0x18) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG (SMEMC_VIRT + 0x1C) /* Synchronous Static Memory Control Register */
+#define SXMRS (SMEMC_VIRT + 0x24) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 (SMEMC_VIRT + 0x28) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 (SMEMC_VIRT + 0x2C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 (SMEMC_VIRT + 0x30) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 (SMEMC_VIRT + 0x34) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 (SMEMC_VIRT + 0x38) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 (SMEMC_VIRT + 0x3C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS (SMEMC_VIRT + 0x40) /* MRS value to be written to SDRAM */
+#define BOOT_DEF (SMEMC_VIRT + 0x44) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MEMCLKCFG (SMEMC_VIRT + 0x68) /* Clock Configuration */
+#define CSADRCFG0 (SMEMC_VIRT + 0x80) /* Address Configuration Register for CS0 */
+#define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */
+#define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */
+#define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) (SMEMC_VIRT + 0x28 + ((s)<<2)) /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) (SMEMC_VIRT + 0x30 + ((s)<<2)) /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) (SMEMC_VIRT + 0x38 + ((s)<<2)) /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+
+#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 1beb40f..54e91c9 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -16,20 +16,31 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/gpio.h>
-#include <mach/regs-intc.h>
#include "generic.h"
-#define MAX_INTERNAL_IRQS 128
+#define IRQ_BASE (void __iomem *)io_p2v(0x40d00000)
-#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f)
-#define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
-#define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
+#define ICIP (0x000)
+#define ICMR (0x004)
+#define ICLR (0x008)
+#define ICFR (0x00c)
+#define ICPR (0x010)
+#define ICCR (0x014)
+#define ICHP (0x018)
+#define IPR(i) (((i) < 32) ? (0x01c + ((i) << 2)) : \
+ ((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) : \
+ (0x144 + (((i) - 64) << 2)))
+#define IPR_VALID (1 << 31)
+#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f)
+
+#define MAX_INTERNAL_IRQS 128
/*
* This is for peripheral IRQs internal to the PXA chip.
@@ -37,14 +48,27 @@
static int pxa_internal_irq_nr;
+static inline int cpu_has_ipr(void)
+{
+ return !cpu_is_pxa25x();
+}
+
static void pxa_mask_irq(unsigned int irq)
{
- _ICMR(irq) &= ~(1 << IRQ_BIT(irq));
+ void __iomem *base = get_irq_chip_data(irq);
+ uint32_t icmr = __raw_readl(base + ICMR);
+
+ icmr &= ~(1 << IRQ_BIT(irq));
+ __raw_writel(icmr, base + ICMR);
}
static void pxa_unmask_irq(unsigned int irq)
{
- _ICMR(irq) |= 1 << IRQ_BIT(irq);
+ void __iomem *base = get_irq_chip_data(irq);
+ uint32_t icmr = __raw_readl(base + ICMR);
+
+ icmr |= 1 << IRQ_BIT(irq);
+ __raw_writel(icmr, base + ICMR);
}
static struct irq_chip pxa_internal_irq_chip = {
@@ -86,12 +110,16 @@
static void pxa_mask_low_gpio(unsigned int irq)
{
- ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ desc->chip->mask(irq);
}
static void pxa_unmask_low_gpio(unsigned int irq)
{
- ICMR |= 1 << (irq - PXA_IRQ(0));
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ desc->chip->unmask(irq);
}
static struct irq_chip pxa_low_gpio_chip = {
@@ -120,33 +148,45 @@
pxa_low_gpio_chip.set_wake = fn;
}
+static inline void __iomem *irq_base(int i)
+{
+ static unsigned long phys_base[] = {
+ 0x40d00000,
+ 0x40d0009c,
+ 0x40d00130,
+ };
+
+ return (void __iomem *)io_p2v(phys_base[i >> 5]);
+}
+
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
{
- int irq, i;
+ int irq, i, n;
BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
pxa_internal_irq_nr = irq_nr;
- for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
- _ICMR(irq) = 0; /* disable all IRQs */
- _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */
- }
+ for (n = 0; n < irq_nr; n += 32) {
+ void __iomem *base = irq_base(n);
- /* initialize interrupt priority */
- if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
- for (i = 0; i < irq_nr; i++)
- IPR(i) = i | (1 << 31);
+ __raw_writel(0, base + ICMR); /* disable all IRQs */
+ __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */
+ for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
+ /* initialize interrupt priority */
+ if (cpu_has_ipr())
+ __raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
+
+ irq = PXA_IRQ(i);
+ set_irq_chip(irq, &pxa_internal_irq_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
}
/* only unmasked interrupts kick us out of idle */
- ICCR = 1;
-
- for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) {
- set_irq_chip(irq, &pxa_internal_irq_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
+ __raw_writel(1, irq_base(0) + ICCR);
pxa_internal_irq_chip.set_wake = fn;
pxa_init_low_gpio_irq(fn);
@@ -158,16 +198,18 @@
static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
{
- int i, irq = PXA_IRQ(0);
+ int i;
- for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
- saved_icmr[i] = _ICMR(irq);
- _ICMR(irq) = 0;
+ for (i = 0; i < pxa_internal_irq_nr; i += 32) {
+ void __iomem *base = irq_base(i);
+
+ saved_icmr[i] = __raw_readl(base + ICMR);
+ __raw_writel(0, base + ICMR);
}
- if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ if (cpu_has_ipr()) {
for (i = 0; i < pxa_internal_irq_nr; i++)
- saved_ipr[i] = IPR(i);
+ saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
}
return 0;
@@ -175,19 +217,20 @@
static int pxa_irq_resume(struct sys_device *dev)
{
- int i, irq = PXA_IRQ(0);
+ int i;
- if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ for (i = 0; i < pxa_internal_irq_nr; i += 32) {
+ void __iomem *base = irq_base(i);
+
+ __raw_writel(saved_icmr[i], base + ICMR);
+ __raw_writel(0, base + ICLR);
+ }
+
+ if (!cpu_is_pxa25x())
for (i = 0; i < pxa_internal_irq_nr; i++)
- IPR(i) = saved_ipr[i];
- }
+ __raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
- for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
- _ICMR(irq) = saved_icmr[i];
- _ICLR(irq) = 0;
- }
-
- ICCR = 1;
+ __raw_writel(1, IRQ_BASE + ICCR);
return 0;
}
#else
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 41aa89e..719c260 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -438,7 +438,7 @@
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 623af02..8ab62a6 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -46,6 +46,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -463,7 +464,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
lpd270_flash_data[1].width = 4;
/*
@@ -495,7 +496,7 @@
static void __init lpd270_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
/* for use I SRAM as framebuffer. */
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1499493..d337548 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -50,6 +50,7 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/pm.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "clock.h"
@@ -525,7 +526,7 @@
pxa_set_ac97_info(NULL);
lubbock_flash_data[0].width = lubbock_flash_data[1].width =
- (BOOT_DEF & 1) ? 2 : 4;
+ (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
/* Compensate for the nROMBT switch which swaps the flash banks */
printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
flashboot?"Flash":"ROM", flashboot);
@@ -549,7 +550,7 @@
static void __init lubbock_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 9066376..41198f0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -765,7 +765,7 @@
MACHINE_START(MAGICIAN, "HTC Magician")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = magician_init,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a980a5c..740c035 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -51,6 +51,7 @@
#include <mach/irda.h>
#include <mach/ohci.h>
#include <plat/pxa27x_keypad.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -565,7 +566,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
mst_flash_data[1].width = 4;
/* Compensate for SW7 which swaps the flash banks */
@@ -614,7 +615,7 @@
static void __init mainstone_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
/* for use I SRAM as framebuffer. */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index f5fb915..faafea3 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -819,7 +819,7 @@
MACHINE_START(MIOA701, "MIO A701")
.boot_params = 0xa0000100,
- .map_io = &pxa_map_io,
+ .map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 116167aa..59cce78 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -94,7 +94,7 @@
MACHINE_START(NEC_MP900, "MobilePro900/C")
.boot_params = 0xa0220100,
.timer = &pxa_timer,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = mp900c_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ce092c5..a6f898c 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -313,7 +313,7 @@
static void __init palmld_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
}
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 862da81..df4d7d0 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -203,7 +203,7 @@
MACHINE_START(PALMT5, "Palm Tungsten|T5")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 2131d58..a09a237 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -25,6 +25,7 @@
#include <linux/power_supply.h>
#include <linux/gpio_keys.h>
#include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -116,6 +117,7 @@
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data palmtc_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = GPIO_NR_PALMTC_SD_POWER,
@@ -124,9 +126,18 @@
.detect_delay_ms = 200,
};
+static void __init palmtc_mmc_init(void)
+{
+ pxa_set_mci_info(&palmtc_mci_platform_data);
+}
+#else
+static inline void palmtc_mmc_init(void) {}
+#endif
+
/******************************************************************************
* GPIO keys
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button palmtc_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
};
@@ -144,9 +155,18 @@
},
};
+static void __init palmtc_keys_init(void)
+{
+ platform_device_register(&palmtc_pxa_keys);
+}
+#else
+static inline void palmtc_keys_init(void) {}
+#endif
+
/******************************************************************************
* Backlight
******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static int palmtc_backlight_init(struct device *dev)
{
int ret;
@@ -196,17 +216,35 @@
},
};
+static void __init palmtc_pwm_init(void)
+{
+ platform_device_register(&palmtc_backlight);
+}
+#else
+static inline void palmtc_pwm_init(void) {}
+#endif
+
/******************************************************************************
* IrDA
******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
static struct pxaficp_platform_data palmtc_ficp_platform_data = {
.gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
+static void __init palmtc_irda_init(void)
+{
+ pxa_set_ficp_info(&palmtc_ficp_platform_data);
+}
+#else
+static inline void palmtc_irda_init(void) {}
+#endif
+
/******************************************************************************
* Keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
static const uint32_t palmtc_matrix_keys[] = {
KEY(0, 0, KEY_F1),
KEY(0, 1, KEY_X),
@@ -290,27 +328,103 @@
.platform_data = &palmtc_keypad_platform_data,
},
};
+static void __init palmtc_mkp_init(void)
+{
+ platform_device_register(&palmtc_keyboard);
+}
+#else
+static inline void palmtc_mkp_init(void) {}
+#endif
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+static struct gpio_vbus_mach_info palmtc_udc_info = {
.gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMTC_USB_POWER,
};
+static struct platform_device palmtc_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_udc_info,
+ },
+};
+
+static void __init palmtc_udc_init(void)
+{
+ platform_device_register(&palmtc_gpio_vbus);
+};
+#else
+static inline void palmtc_udc_init(void) {}
+#endif
+
/******************************************************************************
* Touchscreen / Battery / GPIO-extender
******************************************************************************/
-static struct platform_device palmtc_ucb1400_core = {
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device palmtc_ucb1400_device = {
.name = "ucb1400_core",
.id = -1,
};
+static void __init palmtc_ts_init(void)
+{
+ pxa_set_ac97_info(NULL);
+ platform_device_register(&palmtc_ucb1400_device);
+}
+#else
+static inline void palmtc_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led palmtc_gpio_leds[] = {
+{
+ .name = "palmtc:green:user",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMTC_LED_POWER,
+ .active_low = 1,
+}, {
+ .name = "palmtc:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMTC_VIBRA_POWER,
+ .active_low = 1,
+}
+
+};
+
+static struct gpio_led_platform_data palmtc_gpio_led_info = {
+ .leds = palmtc_gpio_leds,
+ .num_leds = ARRAY_SIZE(palmtc_gpio_leds),
+};
+
+static struct platform_device palmtc_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_gpio_led_info,
+ }
+};
+
+static void __init palmtc_leds_init(void)
+{
+ platform_device_register(&palmtc_leds);
+}
+#else
+static inline void palmtc_leds_init(void) {}
+#endif
+
/******************************************************************************
* NOR Flash
******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct resource palmtc_flash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_16M - 1,
@@ -356,24 +470,33 @@
},
};
+static void __init palmtc_nor_init(void)
+{
+ platform_device_register(&palmtc_flash);
+}
+#else
+static inline void palmtc_nor_init(void) {}
+#endif
+
/******************************************************************************
* Framebuffer
******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info palmtc_lcd_modes[] = {
-{
- .pixclock = 115384,
- .xres = 320,
- .yres = 320,
- .bpp = 16,
+ {
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
- .left_margin = 27,
- .right_margin = 7,
- .upper_margin = 7,
- .lower_margin = 8,
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
- .hsync_len = 6,
- .vsync_len = 1,
-},
+ .hsync_len = 6,
+ .vsync_len = 1,
+ },
};
static struct pxafb_mach_info palmtc_lcd_screen = {
@@ -382,17 +505,17 @@
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+static void __init palmtc_lcd_init(void)
+{
+ set_pxa_fb_info(&palmtc_lcd_screen);
+}
+#else
+static inline void palmtc_lcd_init(void) {}
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
- &palmtc_backlight,
- &palmtc_ucb1400_core,
- &palmtc_keyboard,
- &palmtc_pxa_keys,
- &palmtc_flash,
-};
-
static void __init palmtc_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
@@ -402,18 +525,21 @@
pxa_set_stuart_info(NULL);
pxa_set_hwuart_info(NULL);
- set_pxa_fb_info(&palmtc_lcd_screen);
- pxa_set_mci_info(&palmtc_mci_platform_data);
- pxa_set_udc_info(&palmtc_udc_info);
- pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&palmtc_ficp_platform_data);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palmtc_mmc_init();
+ palmtc_keys_init();
+ palmtc_pwm_init();
+ palmtc_irda_init();
+ palmtc_mkp_init();
+ palmtc_udc_init();
+ palmtc_ts_init();
+ palmtc_nor_init();
+ palmtc_lcd_init();
+ palmtc_leds_init();
};
MACHINE_START(PALMTC, "Palm Tungsten|C")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = palmtc_init
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a9dae7b..3f25014 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -374,7 +374,7 @@
MACHINE_START(PALMTE2, "Palm Tungsten|E2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = palmte2_init
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 00e2d7b..8aadad5 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -442,7 +442,7 @@
MACHINE_START(TREO680, "Palm Treo 680")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -451,7 +451,7 @@
MACHINE_START(CENTRO, "Palm Centro 685")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e5c9932..595f002 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -334,7 +334,7 @@
static void __init palmtx_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index af6203f..7bf4017 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -280,7 +280,7 @@
MACHINE_START(PALMZ72, "Palm Zire72")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = palmz72_init
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index c77e8f3..8547c9a 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -244,7 +244,7 @@
static void __init pcm027_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
/* initialize sleep mode regs (wake-up sources, etc) */
PGSR0 = 0x01308000;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 93a191c..8451790 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -466,7 +466,7 @@
MACHINE_START(POODLE, "SHARP Poodle")
.fixup = fixup_poodle,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index de53f2e..3f5241c 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,6 +23,7 @@
#include <linux/suspend.h>
#include <linux/sysdev.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
@@ -30,6 +31,7 @@
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -90,23 +92,21 @@
return (turbo & 1) ? (N/1000) : (M/1000);
}
-/*
- * Return the current memory clock frequency in units of 10kHz
- */
-unsigned int pxa25x_get_memclk_frequency_10khz(void)
+static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
{
- return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000;
+ return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
}
-static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk)
-{
- return pxa25x_get_memclk_frequency_10khz() * 10000;
-}
+static const struct clkops clk_pxa25x_mem_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+ .getrate = clk_pxa25x_mem_getrate,
+};
static const struct clkops clk_pxa25x_lcd_ops = {
- .enable = clk_cken_enable,
- .disable = clk_cken_disable,
- .getrate = clk_pxa25x_lcd_getrate,
+ .enable = clk_pxa2xx_cken_enable,
+ .disable = clk_pxa2xx_cken_disable,
+ .getrate = clk_pxa25x_mem_getrate,
};
static unsigned long gpio12_config_32k[] = {
@@ -160,31 +160,30 @@
* 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
* 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
*/
-static DEFINE_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
- INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
/*
* PXA 2xx clock declarations.
*/
+static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
+static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+
static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_usb, USB, 47923000, 5);
static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
static struct clk_lookup pxa25x_clkregs[] = {
INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
@@ -205,8 +204,12 @@
INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
+ INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
};
+static struct clk_lookup pxa25x_hwuart_clkreg =
+ INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
+
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
@@ -219,20 +222,17 @@
*/
enum {
SLEEP_SAVE_PSTR,
- SLEEP_SAVE_CKEN,
SLEEP_SAVE_COUNT
};
static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(CKEN);
SAVE(PSTR);
}
static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
{
- RESTORE(CKEN);
RESTORE(PSTR);
}
@@ -320,6 +320,22 @@
}
#endif
+static struct map_desc pxa25x_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa25x_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
+ pxa25x_get_clk_frequency_khz(1);
+}
+
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
&pxa_device_pmu,
@@ -339,7 +355,9 @@
.cls = &pxa2xx_mfp_sysclass,
}, {
.cls = &pxa_gpio_sysclass,
- },
+ }, {
+ .cls = &pxa2xx_clock_sysclass,
+ }
};
static int __init pxa25x_init(void)
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d1fbf29..b2130b7 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -17,7 +17,9 @@
#include <linux/suspend.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
@@ -27,6 +29,8 @@
#include <mach/ohci.h>
#include <mach/pm.h>
#include <mach/dma.h>
+#include <mach/smemc.h>
+
#include <plat/i2c.h>
#include "generic.h"
@@ -107,10 +111,9 @@
}
/*
- * Return the current mem clock frequency in units of 10kHz as
- * reflected by CCCR[A], B, and L
+ * Return the current mem clock frequency as reflected by CCCR[A], B, and L
*/
-unsigned int pxa27x_get_memclk_frequency_10khz(void)
+static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
{
unsigned long ccsr, clkcfg;
unsigned int l, L, m, M;
@@ -129,9 +132,15 @@
L = l * BASE_CLK;
M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
- return (M / 10000);
+ return M;
}
+static const struct clkops clk_pxa27x_mem_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+ .getrate = clk_pxa27x_mem_getrate,
+};
+
/*
* Return the current LCD clock frequency in units of 10kHz as
*/
@@ -157,36 +166,38 @@
}
static const struct clkops clk_pxa27x_lcd_ops = {
- .enable = clk_cken_enable,
- .disable = clk_cken_disable,
+ .enable = clk_pxa2xx_cken_enable,
+ .disable = clk_pxa2xx_cken_disable,
.getrate = clk_pxa27x_lcd_getrate,
};
+static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
+static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
+
static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_CKEN(pxa27x_memc, MEMC, 0, 0);
+static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
static struct clk_lookup pxa27x_clkregs[] = {
INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
@@ -215,6 +226,7 @@
INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
+ INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
};
#ifdef CONFIG_PM
@@ -246,7 +258,6 @@
*/
enum {
SLEEP_SAVE_PSTR,
- SLEEP_SAVE_CKEN,
SLEEP_SAVE_MDREFR,
SLEEP_SAVE_PCFR,
SLEEP_SAVE_COUNT
@@ -254,21 +265,19 @@
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(MDREFR);
+ sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
SAVE(PCFR);
- SAVE(CKEN);
SAVE(PSTR);
}
void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
{
- RESTORE(MDREFR);
+ __raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
RESTORE(PCFR);
PSSR = PSSR_RDH | PSSR_PH;
- RESTORE(CKEN);
RESTORE(PSTR);
}
@@ -370,6 +379,27 @@
pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
+static struct map_desc pxa27x_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ }, { /* IMem ctl */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0x58000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa27x_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
+ pxa27x_get_clk_frequency_khz(1);
+}
+
/*
* device registration specific to PXA27x.
*/
@@ -405,7 +435,9 @@
.cls = &pxa2xx_mfp_sysclass,
}, {
.cls = &pxa_gpio_sysclass,
- },
+ }, {
+ .cls = &pxa2xx_clock_sysclass,
+ }
};
static int __init pxa27x_init(void)
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index d1c747c..e14818f 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/sysdev.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/pxa3xx-regs.h>
@@ -30,193 +31,16 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/regs-intc.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
#include "clock.h"
-/* Crystal clock: 13MHz */
-#define BASE_CLK 13000000
-
-/* Ring Oscillator Clock: 60MHz */
-#define RO_CLK 60000000
-
-#define ACCR_D0CS (1 << 26)
-#define ACCR_PCCE (1 << 11)
-
#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
-/* crystal frequency to static memory controller multiplier (SMCFS) */
-static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-
-/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa3xx_get_clk_frequency_khz(int info)
-{
- unsigned long acsr, xclkcfg;
- unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
-
- /* Read XCLKCFG register turbo bit */
- __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
- t = xclkcfg & 0x1;
-
- acsr = ACSR;
-
- xl = acsr & 0x1f;
- xn = (acsr >> 8) & 0x7;
- hss = (acsr >> 14) & 0x3;
-
- XL = xl * BASE_CLK;
- XN = xn * XL;
-
- ro = acsr & ACCR_D0CS;
-
- CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
- HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
- if (info) {
- pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
- RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
- (ro) ? "" : "in");
- pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
- XL / 1000000, (XL % 1000000) / 10000, xl);
- pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
- XN / 1000000, (XN % 1000000) / 10000, xn,
- (t) ? "" : "in");
- pr_info("HSIO bus clock: %d.%02dMHz\n",
- HSS / 1000000, (HSS % 1000000) / 10000);
- }
-
- return CLK / 1000;
-}
-
-void pxa3xx_clear_reset_status(unsigned int mask)
-{
- /* RESET_STATUS_* has a 1:1 mapping with ARSR */
- ARSR = mask;
-}
-
-/*
- * Return the current AC97 clock frequency.
- */
-static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
-{
- unsigned long rate = 312000000;
- unsigned long ac97_div;
-
- ac97_div = AC97_DIV;
-
- /* This may loose precision for some rates but won't for the
- * standard 24.576MHz.
- */
- rate /= (ac97_div >> 12) & 0x7fff;
- rate *= (ac97_div & 0xfff);
-
- return rate;
-}
-
-/*
- * Return the current HSIO bus clock frequency
- */
-static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
-{
- unsigned long acsr;
- unsigned int hss, hsio_clk;
-
- acsr = ACSR;
-
- hss = (acsr >> 14) & 0x3;
- hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
- return hsio_clk;
-}
-
-void clk_pxa3xx_cken_enable(struct clk *clk)
-{
- unsigned long mask = 1ul << (clk->cken & 0x1f);
-
- if (clk->cken < 32)
- CKENA |= mask;
- else
- CKENB |= mask;
-}
-
-void clk_pxa3xx_cken_disable(struct clk *clk)
-{
- unsigned long mask = 1ul << (clk->cken & 0x1f);
-
- if (clk->cken < 32)
- CKENA &= ~mask;
- else
- CKENB &= ~mask;
-}
-
-const struct clkops clk_pxa3xx_cken_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
-};
-
-static const struct clkops clk_pxa3xx_hsio_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
- .getrate = clk_pxa3xx_hsio_getrate,
-};
-
-static const struct clkops clk_pxa3xx_ac97_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
- .getrate = clk_pxa3xx_ac97_getrate,
-};
-
-static void clk_pout_enable(struct clk *clk)
-{
- OSCC |= OSCC_PEN;
-}
-
-static void clk_pout_disable(struct clk *clk)
-{
- OSCC &= ~OSCC_PEN;
-}
-
-static const struct clkops clk_pout_ops = {
- .enable = clk_pout_enable,
- .disable = clk_pout_disable,
-};
-
-static void clk_dummy_enable(struct clk *clk)
-{
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_dummy_ops = {
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable,
-};
-
-static struct clk clk_pxa3xx_pout = {
- .ops = &clk_pout_ops,
- .rate = 13000000,
- .delay = 70,
-};
-
-static struct clk clk_dummy = {
- .ops = &clk_dummy_ops,
-};
-
-static DEFINE_PXA3_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_PXA3_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
-static DEFINE_PXA3_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
@@ -234,6 +58,12 @@
static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
+static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
+static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
+static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
+static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+
static struct clk_lookup pxa3xx_clkregs[] = {
INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
/* Power I2C clock is always on */
@@ -258,6 +88,7 @@
INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
+ INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
};
#ifdef CONFIG_PM
@@ -268,30 +99,6 @@
static void __iomem *sram;
static unsigned long wakeup_src;
-#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-
-enum { SLEEP_SAVE_CKENA,
- SLEEP_SAVE_CKENB,
- SLEEP_SAVE_ACCR,
-
- SLEEP_SAVE_COUNT,
-};
-
-static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
-{
- SAVE(CKENA);
- SAVE(CKENB);
- SAVE(ACCR);
-}
-
-static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
-{
- RESTORE(ACCR);
- RESTORE(CKENA);
- RESTORE(CKENB);
-}
-
/*
* Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
* memory controller has to be reinitialised, so we place some code
@@ -390,9 +197,6 @@
}
static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
- .save_count = SLEEP_SAVE_COUNT,
- .save = pxa3xx_cpu_pm_save,
- .restore = pxa3xx_cpu_pm_restore,
.valid = pxa3xx_cpu_pm_valid,
.enter = pxa3xx_cpu_pm_enter,
};
@@ -580,6 +384,22 @@
pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
+static struct map_desc pxa3xx_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ }
+};
+
+void __init pxa3xx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
+ pxa3xx_get_clk_frequency_khz(1);
+}
+
/*
* device registration specific to PXA3xx.
*/
@@ -615,7 +435,9 @@
.cls = &pxa3xx_mfp_sysclass,
}, {
.cls = &pxa_gpio_sysclass,
- },
+ }, {
+ .cls = &pxa3xx_clock_sysclass,
+ }
};
static int __init pxa3xx_init(void)
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 7d29dd3..8aeacf9 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@
static int __init pxa930_init(void)
{
- if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
+ if (cpu_is_pxa93x()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa930_mfp_addr_map);
}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
new file mode 100644
index 0000000..437980f
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -0,0 +1,308 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa95x.c
+ *
+ * code specific to PXA95x aka MGx
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/pxa930.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/regs-intc.h>
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR(GPIO0, 0x02e0),
+ MFP_ADDR(GPIO1, 0x02dc),
+ MFP_ADDR(GPIO2, 0x02e8),
+ MFP_ADDR(GPIO3, 0x02d8),
+ MFP_ADDR(GPIO4, 0x02e4),
+ MFP_ADDR(GPIO5, 0x02ec),
+ MFP_ADDR(GPIO6, 0x02f8),
+ MFP_ADDR(GPIO7, 0x02fc),
+ MFP_ADDR(GPIO8, 0x0300),
+ MFP_ADDR(GPIO9, 0x02d4),
+ MFP_ADDR(GPIO10, 0x02f4),
+ MFP_ADDR(GPIO11, 0x02f0),
+ MFP_ADDR(GPIO12, 0x0304),
+ MFP_ADDR(GPIO13, 0x0310),
+ MFP_ADDR(GPIO14, 0x0308),
+ MFP_ADDR(GPIO15, 0x030c),
+ MFP_ADDR(GPIO16, 0x04e8),
+ MFP_ADDR(GPIO17, 0x04f4),
+ MFP_ADDR(GPIO18, 0x04f8),
+ MFP_ADDR(GPIO19, 0x04fc),
+ MFP_ADDR(GPIO20, 0x0518),
+ MFP_ADDR(GPIO21, 0x051c),
+ MFP_ADDR(GPIO22, 0x04ec),
+ MFP_ADDR(GPIO23, 0x0500),
+ MFP_ADDR(GPIO24, 0x04f0),
+ MFP_ADDR(GPIO25, 0x0504),
+ MFP_ADDR(GPIO26, 0x0510),
+ MFP_ADDR(GPIO27, 0x0514),
+ MFP_ADDR(GPIO28, 0x0520),
+ MFP_ADDR(GPIO29, 0x0600),
+ MFP_ADDR(GPIO30, 0x0618),
+ MFP_ADDR(GPIO31, 0x0610),
+ MFP_ADDR(GPIO32, 0x060c),
+ MFP_ADDR(GPIO33, 0x061c),
+ MFP_ADDR(GPIO34, 0x0620),
+ MFP_ADDR(GPIO35, 0x0628),
+ MFP_ADDR(GPIO36, 0x062c),
+ MFP_ADDR(GPIO37, 0x0630),
+ MFP_ADDR(GPIO38, 0x0634),
+ MFP_ADDR(GPIO39, 0x0638),
+ MFP_ADDR(GPIO40, 0x063c),
+ MFP_ADDR(GPIO41, 0x0614),
+ MFP_ADDR(GPIO42, 0x0624),
+ MFP_ADDR(GPIO43, 0x0608),
+ MFP_ADDR(GPIO44, 0x0604),
+ MFP_ADDR(GPIO45, 0x050c),
+ MFP_ADDR(GPIO46, 0x0508),
+ MFP_ADDR(GPIO47, 0x02bc),
+ MFP_ADDR(GPIO48, 0x02b4),
+ MFP_ADDR(GPIO49, 0x02b8),
+ MFP_ADDR(GPIO50, 0x02c8),
+ MFP_ADDR(GPIO51, 0x02c0),
+ MFP_ADDR(GPIO52, 0x02c4),
+ MFP_ADDR(GPIO53, 0x02d0),
+ MFP_ADDR(GPIO54, 0x02cc),
+ MFP_ADDR(GPIO55, 0x029c),
+ MFP_ADDR(GPIO56, 0x02a0),
+ MFP_ADDR(GPIO57, 0x0294),
+ MFP_ADDR(GPIO58, 0x0298),
+ MFP_ADDR(GPIO59, 0x02a4),
+ MFP_ADDR(GPIO60, 0x02a8),
+ MFP_ADDR(GPIO61, 0x02b0),
+ MFP_ADDR(GPIO62, 0x02ac),
+ MFP_ADDR(GPIO63, 0x0640),
+ MFP_ADDR(GPIO64, 0x065c),
+ MFP_ADDR(GPIO65, 0x0648),
+ MFP_ADDR(GPIO66, 0x0644),
+ MFP_ADDR(GPIO67, 0x0674),
+ MFP_ADDR(GPIO68, 0x0658),
+ MFP_ADDR(GPIO69, 0x0654),
+ MFP_ADDR(GPIO70, 0x0660),
+ MFP_ADDR(GPIO71, 0x0668),
+ MFP_ADDR(GPIO72, 0x0664),
+ MFP_ADDR(GPIO73, 0x0650),
+ MFP_ADDR(GPIO74, 0x066c),
+ MFP_ADDR(GPIO75, 0x064c),
+ MFP_ADDR(GPIO76, 0x0670),
+ MFP_ADDR(GPIO77, 0x0678),
+ MFP_ADDR(GPIO78, 0x067c),
+ MFP_ADDR(GPIO79, 0x0694),
+ MFP_ADDR(GPIO80, 0x069c),
+ MFP_ADDR(GPIO81, 0x06a0),
+ MFP_ADDR(GPIO82, 0x06a4),
+ MFP_ADDR(GPIO83, 0x0698),
+ MFP_ADDR(GPIO84, 0x06bc),
+ MFP_ADDR(GPIO85, 0x06b4),
+ MFP_ADDR(GPIO86, 0x06b0),
+ MFP_ADDR(GPIO87, 0x06c0),
+ MFP_ADDR(GPIO88, 0x06c4),
+ MFP_ADDR(GPIO89, 0x06ac),
+ MFP_ADDR(GPIO90, 0x0680),
+ MFP_ADDR(GPIO91, 0x0684),
+ MFP_ADDR(GPIO92, 0x0688),
+ MFP_ADDR(GPIO93, 0x0690),
+ MFP_ADDR(GPIO94, 0x068c),
+ MFP_ADDR(GPIO95, 0x06a8),
+ MFP_ADDR(GPIO96, 0x06b8),
+ MFP_ADDR(GPIO97, 0x0410),
+ MFP_ADDR(GPIO98, 0x0418),
+ MFP_ADDR(GPIO99, 0x041c),
+ MFP_ADDR(GPIO100, 0x0414),
+ MFP_ADDR(GPIO101, 0x0408),
+ MFP_ADDR(GPIO102, 0x0324),
+ MFP_ADDR(GPIO103, 0x040c),
+ MFP_ADDR(GPIO104, 0x0400),
+ MFP_ADDR(GPIO105, 0x0328),
+ MFP_ADDR(GPIO106, 0x0404),
+
+ MFP_ADDR(GPIO159, 0x0524),
+ MFP_ADDR(GPIO163, 0x0534),
+ MFP_ADDR(GPIO167, 0x0544),
+ MFP_ADDR(GPIO168, 0x0548),
+ MFP_ADDR(GPIO169, 0x054c),
+ MFP_ADDR(GPIO170, 0x0550),
+ MFP_ADDR(GPIO171, 0x0554),
+ MFP_ADDR(GPIO172, 0x0558),
+ MFP_ADDR(GPIO173, 0x055c),
+
+ MFP_ADDR(nXCVREN, 0x0204),
+ MFP_ADDR(DF_CLE_nOE, 0x020c),
+ MFP_ADDR(DF_nADV1_ALE, 0x0218),
+ MFP_ADDR(DF_SCLK_E, 0x0214),
+ MFP_ADDR(DF_SCLK_S, 0x0210),
+ MFP_ADDR(nBE0, 0x021c),
+ MFP_ADDR(nBE1, 0x0220),
+ MFP_ADDR(DF_nADV2_ALE, 0x0224),
+ MFP_ADDR(DF_INT_RnB, 0x0228),
+ MFP_ADDR(DF_nCS0, 0x022c),
+ MFP_ADDR(DF_nCS1, 0x0230),
+ MFP_ADDR(nLUA, 0x0254),
+ MFP_ADDR(nLLA, 0x0258),
+ MFP_ADDR(DF_nWE, 0x0234),
+ MFP_ADDR(DF_nRE_nOE, 0x0238),
+ MFP_ADDR(DF_ADDR0, 0x024c),
+ MFP_ADDR(DF_ADDR1, 0x0250),
+ MFP_ADDR(DF_ADDR2, 0x025c),
+ MFP_ADDR(DF_ADDR3, 0x0260),
+ MFP_ADDR(DF_IO0, 0x023c),
+ MFP_ADDR(DF_IO1, 0x0240),
+ MFP_ADDR(DF_IO2, 0x0244),
+ MFP_ADDR(DF_IO3, 0x0248),
+ MFP_ADDR(DF_IO4, 0x0264),
+ MFP_ADDR(DF_IO5, 0x0268),
+ MFP_ADDR(DF_IO6, 0x026c),
+ MFP_ADDR(DF_IO7, 0x0270),
+ MFP_ADDR(DF_IO8, 0x0274),
+ MFP_ADDR(DF_IO9, 0x0278),
+ MFP_ADDR(DF_IO10, 0x027c),
+ MFP_ADDR(DF_IO11, 0x0280),
+ MFP_ADDR(DF_IO12, 0x0284),
+ MFP_ADDR(DF_IO13, 0x0288),
+ MFP_ADDR(DF_IO14, 0x028c),
+ MFP_ADDR(DF_IO15, 0x0290),
+
+ MFP_ADDR(GSIM_UIO, 0x0314),
+ MFP_ADDR(GSIM_UCLK, 0x0318),
+ MFP_ADDR(GSIM_UDET, 0x031c),
+ MFP_ADDR(GSIM_nURST, 0x0320),
+
+ MFP_ADDR(PMIC_INT, 0x06c8),
+
+ MFP_ADDR(RDY, 0x0200),
+
+ MFP_ADDR_END,
+};
+
+static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
+
+static struct clk_lookup pxa95x_clkregs[] = {
+ INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
+ /* Power I2C clock is always on */
+ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
+ INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
+ INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
+ INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
+};
+
+void __init pxa95x_init_irq(void)
+{
+ pxa_init_irq(96, NULL);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
+}
+
+/*
+ * device registration specific to PXA93x.
+ */
+
+void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_i2c_power, info);
+}
+
+static struct platform_device *devices[] __initdata = {
+ &sa1100_device_rtc,
+ &pxa_device_rtc,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
+ &pxa3xx_device_ssp4,
+ &pxa27x_device_pwm0,
+ &pxa27x_device_pwm1,
+};
+
+static struct sys_device pxa95x_sysdev[] = {
+ {
+ .cls = &pxa_irq_sysclass,
+ }, {
+ .cls = &pxa_gpio_sysclass,
+ }, {
+ .cls = &pxa3xx_clock_sysclass,
+ }
+};
+
+static int __init pxa95x_init(void)
+{
+ int ret = 0, i;
+
+ if (cpu_is_pxa95x()) {
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa95x_mfp_addr_map);
+
+ reset_status = ARSR;
+
+ /*
+ * clear RDH bit every time after reset
+ *
+ * Note: the last 3 bits DxS are write-1-to-clear so carefully
+ * preserve them here in case they will be referenced later
+ */
+ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+
+ clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
+
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
+ ret = sysdev_register(&pxa95x_sysdev[i]);
+ if (ret)
+ pr_err("failed to register sysdev[%d]\n", i);
+ }
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+
+ return ret;
+}
+
+postcore_initcall(pxa95x_init);
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 4121d03..8361151 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -588,6 +588,9 @@
.num_modes = 1,
.video_mem_size = 0x400000,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+#ifdef CONFIG_PXA3XX_GCU
+ .acceleration_enabled = 1,
+#endif
};
static void __init raumfeld_lcd_init(void)
@@ -616,6 +619,8 @@
pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
else
gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+
+ platform_device_register(&pxa3xx_device_gcu);
}
/**
@@ -1085,7 +1090,7 @@
MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_controller_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
@@ -1095,7 +1100,7 @@
MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_connector_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
@@ -1105,7 +1110,7 @@
MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_speaker_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ffa50e633e..c1ca8cb 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -597,7 +597,7 @@
MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = saar_init,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
new file mode 100644
index 0000000..e497922
--- /dev/null
+++ b/arch/arm/mach-pxa/saarb.c
@@ -0,0 +1,114 @@
+/*
+ * linux/arch/arm/mach-pxa/saarb.c
+ *
+ * Support for the Marvell Handheld Platform (aka SAARB)
+ *
+ * Copyright (C) 2007-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa930.h>
+#include <mach/gpio.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+
+#define SAARB_NR_IRQS (IRQ_BOARD_START + 40)
+
+static struct pm860x_touch_pdata saarb_touch = {
+ .gpadc_prebias = 1,
+ .slot_cycle = 1,
+ .tsi_prebias = 6,
+ .pen_prebias = 16,
+ .pen_prechg = 2,
+ .res_x = 300,
+};
+
+static struct pm860x_backlight_pdata saarb_backlight[] = {
+ {
+ .id = PM8606_ID_BACKLIGHT,
+ .iset = PM8606_WLED_CURRENT(24),
+ .flags = PM8606_BACKLIGHT1,
+ },
+ {},
+};
+
+static struct pm860x_led_pdata saarb_led[] = {
+ {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_RED,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_GREEN,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_BLUE,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_RED,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_GREEN,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_BLUE,
+ },
+};
+
+static struct pm860x_platform_data saarb_pm8607_info = {
+ .touch = &saarb_touch,
+ .backlight = &saarb_backlight[0],
+ .led = &saarb_led[0],
+ .companion_addr = 0x10,
+ .irq_mode = 0,
+ .irq_base = IRQ_BOARD_START,
+
+ .i2c_port = GI2C_PORT,
+};
+
+static struct i2c_board_info saarb_i2c_info[] = {
+ {
+ .type = "88PM860x",
+ .addr = 0x34,
+ .platform_data = &saarb_pm8607_info,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ },
+};
+
+static void __init saarb_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
+}
+
+MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .nr_irqs = SAARB_NR_IRQS,
+ .init_irq = pxa95x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = saarb_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index ae00811..c551da8 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -14,7 +14,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
-
+#include <mach/smemc.h>
#include <mach/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index d6f6904..232b731 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -9,50 +9,37 @@
#include <linux/sysdev.h>
#include <mach/hardware.h>
-
-#define SMEMC_PHYS_BASE (0x4A000000)
-#define SMEMC_PHYS_SIZE (0x90)
-
-#define MSC0 (0x08) /* Static Memory Controller Register 0 */
-#define MSC1 (0x0C) /* Static Memory Controller Register 1 */
-#define SXCNFG (0x1C) /* Synchronous Static Memory Control Register */
-#define MEMCLKCFG (0x68) /* Clock Configuration */
-#define CSADRCFG0 (0x80) /* Address Configuration Register for CS0 */
-#define CSADRCFG1 (0x84) /* Address Configuration Register for CS1 */
-#define CSADRCFG2 (0x88) /* Address Configuration Register for CS2 */
-#define CSADRCFG3 (0x8C) /* Address Configuration Register for CS3 */
+#include <mach/smemc.h>
#ifdef CONFIG_PM
-static void __iomem *smemc_mmio_base;
-
static unsigned long msc[2];
static unsigned long sxcnfg, memclkcfg;
static unsigned long csadrcfg[4];
static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
{
- msc[0] = __raw_readl(smemc_mmio_base + MSC0);
- msc[1] = __raw_readl(smemc_mmio_base + MSC1);
- sxcnfg = __raw_readl(smemc_mmio_base + SXCNFG);
- memclkcfg = __raw_readl(smemc_mmio_base + MEMCLKCFG);
- csadrcfg[0] = __raw_readl(smemc_mmio_base + CSADRCFG0);
- csadrcfg[1] = __raw_readl(smemc_mmio_base + CSADRCFG1);
- csadrcfg[2] = __raw_readl(smemc_mmio_base + CSADRCFG2);
- csadrcfg[3] = __raw_readl(smemc_mmio_base + CSADRCFG3);
+ msc[0] = __raw_readl(MSC0);
+ msc[1] = __raw_readl(MSC1);
+ sxcnfg = __raw_readl(SXCNFG);
+ memclkcfg = __raw_readl(MEMCLKCFG);
+ csadrcfg[0] = __raw_readl(CSADRCFG0);
+ csadrcfg[1] = __raw_readl(CSADRCFG1);
+ csadrcfg[2] = __raw_readl(CSADRCFG2);
+ csadrcfg[3] = __raw_readl(CSADRCFG3);
return 0;
}
static int pxa3xx_smemc_resume(struct sys_device *dev)
{
- __raw_writel(msc[0], smemc_mmio_base + MSC0);
- __raw_writel(msc[1], smemc_mmio_base + MSC1);
- __raw_writel(sxcnfg, smemc_mmio_base + SXCNFG);
- __raw_writel(memclkcfg, smemc_mmio_base + MEMCLKCFG);
- __raw_writel(csadrcfg[0], smemc_mmio_base + CSADRCFG0);
- __raw_writel(csadrcfg[1], smemc_mmio_base + CSADRCFG1);
- __raw_writel(csadrcfg[2], smemc_mmio_base + CSADRCFG2);
- __raw_writel(csadrcfg[3], smemc_mmio_base + CSADRCFG3);
+ __raw_writel(msc[0], MSC0);
+ __raw_writel(msc[1], MSC1);
+ __raw_writel(sxcnfg, SXCNFG);
+ __raw_writel(memclkcfg, MEMCLKCFG);
+ __raw_writel(csadrcfg[0], CSADRCFG0);
+ __raw_writel(csadrcfg[1], CSADRCFG1);
+ __raw_writel(csadrcfg[2], CSADRCFG2);
+ __raw_writel(csadrcfg[3], CSADRCFG3);
return 0;
}
@@ -73,10 +60,6 @@
int ret = 0;
if (cpu_is_pxa3xx()) {
- smemc_mmio_base = ioremap(SMEMC_PHYS_BASE, SMEMC_PHYS_SIZE);
- if (smemc_mmio_base == NULL)
- return -ENODEV;
-
ret = sysdev_class_register(&smemc_sysclass);
if (ret)
return ret;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f736119..0499a69 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -27,6 +27,7 @@
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <linux/regulator/machine.h>
+#include <linux/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -44,6 +45,7 @@
#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
@@ -929,9 +931,10 @@
static void spitz_restart(char mode, const char *cmd)
{
+ uint32_t msc0 = __raw_readl(MSC0);
/* Bootloader magic for a reboot */
- if ((MSC0 & 0xffff0000) == 0x7ff00000)
- MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+ if ((msc0 & 0xffff0000) == 0x7ff00000)
+ __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
spitz_poweroff();
}
@@ -980,7 +983,7 @@
#ifdef CONFIG_MACH_SPITZ
MACHINE_START(SPITZ, "SHARP Spitz")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
@@ -990,7 +993,7 @@
#ifdef CONFIG_MACH_BORZOI
MACHINE_START(BORZOI, "SHARP Borzoi")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
@@ -1000,7 +1003,7 @@
#ifdef CONFIG_MACH_AKITA
MACHINE_START(AKITA, "SHARP Akita")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 738adc1..3498a14 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -48,6 +48,7 @@
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pxa27x-udc.h>
+#include <mach/smemc.h>
#include <linux/spi/spi.h>
#include <linux/mfd/da903x.h>
@@ -976,7 +977,7 @@
{
/* This is probably a board specific hack as this must be set
prior to connecting the MFP stuff up. */
- MECR &= ~MECR_NOS;
+ __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
@@ -998,7 +999,7 @@
#ifdef CONFIG_MACH_INTELMOTE2
MACHINE_START(INTELMOTE2, "IMOTE 2")
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
@@ -1008,7 +1009,7 @@
#ifdef CONFIG_MACH_STARGATE2
MACHINE_START(STARGATE2, "Stargate 2")
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = STARGATE_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 2ea7545..9cecf83 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -490,7 +490,7 @@
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = tavorevb_init,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index dc30116..70191a9 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -127,7 +127,7 @@
MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 0ee1df4..57d61ee 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -46,6 +46,7 @@
#include <mach/tosa_bt.h>
#include <mach/pxa2xx_spi.h>
#include <mach/audio.h>
+#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/tosa.h>
@@ -893,9 +894,11 @@
static void tosa_restart(char mode, const char *cmd)
{
+ uint32_t msc0 = __raw_readl(MSC0);
+
/* Bootloader magic for a reboot */
- if((MSC0 & 0xffff0000) == 0x7ff00000)
- MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+ if((msc0 & 0xffff0000) == 0x7ff00000)
+ __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
tosa_poweroff();
}
@@ -953,7 +956,7 @@
MACHINE_START(TOSA, "SHARP Tosa")
.fixup = fixup_tosa,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = TOSA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.init_machine = tosa_init,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 565d062..43fc9ca 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,6 +47,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
@@ -539,10 +540,10 @@
static void __init trizeps4_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
- if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+ if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
/* if flash is 16 bit wide its a Trizeps4 WL */
__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
trizeps4_flash_data[0].width = 2;
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 438fc9a..de69b20 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -983,7 +983,7 @@
static void __init viper_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index f45ac09..b9b5797 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -719,7 +719,7 @@
MACHINE_START(VPAC270, "Voipac PXA270")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = vpac270_init
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3260ce7..51c0281 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -31,6 +31,7 @@
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -172,9 +173,9 @@
/* See Intel XScale Developer's Guide for details */
/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
- MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+ __raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
- MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+ __raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
platform_add_devices(ARRAY_AND_SIZE(devices));
pxa_set_i2c_info(&xcep_i2c_platform_data);
@@ -183,7 +184,7 @@
MACHINE_START(XCEP, "Iskratel XCEP")
.boot_params = 0xa0000100,
.init_machine = xcep_init,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index fefde98..527c2a1 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -704,7 +704,7 @@
MACHINE_START(ZIPIT2, "Zipit Z2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = z2_init,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index dea46a2..c87f2b3 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -47,6 +47,7 @@
#include <mach/audio.h>
#include <mach/arcom-pcmcia.h>
#include <mach/zeus.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -823,13 +824,16 @@
static void __init zeus_init(void)
{
u16 dm9000_msc = DM9K_MSC_VALUE;
+ u32 msc0, msc1;
system_rev = __raw_readw(ZEUS_CPLD_VERSION);
pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
/* Fix timings for dm9000s (CS1/CS2)*/
- MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
- MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+ msc0 = __raw_readl(MSC0) & 0x0000ffff | (dm9000_msc << 16);
+ msc1 = __raw_readl(MSC1) & 0xffff0000 | dm9000_msc;
+ __raw_writel(msc0, MSC0);
+ __raw_writel(msc1, MSC1);
pm_power_off = zeus_power_off;
zeus_setup_apm();
@@ -883,7 +887,7 @@
static void __init zeus_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 702f7a6..a4c784a 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -423,7 +423,7 @@
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 9e27a84..12052e8 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,14 +2,16 @@
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := clock.o cpu.o devices.o
-obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o
+obj-y := clock.o cpu.o devices.o devices-common.o
+obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
-obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o
-obj-$(CONFIG_MACH_U5500) += board-u5500.o
+obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o \
+ board-mop500-keypads.o
+obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o
-obj-$(CONFIG_U5500_MODEM_IRQ) += modem_irq.o
-obj-$(CONFIG_U5500_MBOX) += mbox.o
+obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o
+obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c
new file mode 100644
index 0000000..70318c3
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-keypads.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Keypad layouts for various boards
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/mfd/tc3589x.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <plat/pincfg.h>
+#include <plat/ske.h>
+
+#include <mach/devices.h>
+#include <mach/hardware.h>
+
+#include "devices-db8500.h"
+#include "board-mop500.h"
+
+/* STMPE/SKE keypad use this key layout */
+static const unsigned int mop500_keymap[] = {
+ KEY(2, 5, KEY_END),
+ KEY(4, 1, KEY_POWER),
+ KEY(3, 5, KEY_VOLUMEDOWN),
+ KEY(1, 3, KEY_3),
+ KEY(5, 2, KEY_RIGHT),
+ KEY(5, 0, KEY_9),
+
+ KEY(0, 5, KEY_MENU),
+ KEY(7, 6, KEY_ENTER),
+ KEY(4, 5, KEY_0),
+ KEY(6, 7, KEY_2),
+ KEY(3, 4, KEY_UP),
+ KEY(3, 3, KEY_DOWN),
+
+ KEY(6, 4, KEY_SEND),
+ KEY(6, 2, KEY_BACK),
+ KEY(4, 2, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_1),
+ KEY(4, 3, KEY_LEFT),
+ KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data mop500_keymap_data = {
+ .keymap = mop500_keymap,
+ .keymap_size = ARRAY_SIZE(mop500_keymap),
+};
+
+/*
+ * Nomadik SKE keypad
+ */
+#define ROW_PIN_I0 164
+#define ROW_PIN_I1 163
+#define ROW_PIN_I2 162
+#define ROW_PIN_I3 161
+#define ROW_PIN_I4 156
+#define ROW_PIN_I5 155
+#define ROW_PIN_I6 154
+#define ROW_PIN_I7 153
+#define COL_PIN_O0 168
+#define COL_PIN_O1 167
+#define COL_PIN_O2 166
+#define COL_PIN_O3 165
+#define COL_PIN_O4 160
+#define COL_PIN_O5 159
+#define COL_PIN_O6 158
+#define COL_PIN_O7 157
+
+#define SKE_KPD_MAX_ROWS 8
+#define SKE_KPD_MAX_COLS 8
+
+static int ske_kp_rows[] = {
+ ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
+ ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+};
+
+/*
+ * ske_set_gpio_row: request and set gpio rows
+ */
+static int ske_set_gpio_row(int gpio)
+{
+ int ret;
+
+ ret = gpio_request(gpio, "ske-kp");
+ if (ret < 0) {
+ pr_err("ske_set_gpio_row: gpio request failed\n");
+ return ret;
+ }
+
+ ret = gpio_direction_output(gpio, 1);
+ if (ret < 0) {
+ pr_err("ske_set_gpio_row: gpio direction failed\n");
+ gpio_free(gpio);
+ }
+
+ return ret;
+}
+
+/*
+ * ske_kp_init - enable the gpio configuration
+ */
+static int ske_kp_init(void)
+{
+ int ret, i;
+
+ for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
+ ret = ske_set_gpio_row(ske_kp_rows[i]);
+ if (ret < 0) {
+ pr_err("ske_kp_init: failed init\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static struct ske_keypad_platform_data ske_keypad_board = {
+ .init = ske_kp_init,
+ .keymap_data = &mop500_keymap_data,
+ .no_autorepeat = true,
+ .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */
+ .kcol = SKE_KPD_MAX_COLS,
+ .debounce_ms = 40, /* in millisecs */
+};
+
+/*
+ * STMPE1601
+ */
+static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
+ .debounce_ms = 64,
+ .scan_count = 8,
+ .no_autorepeat = true,
+ .keymap_data = &mop500_keymap_data,
+};
+
+static struct stmpe_platform_data stmpe1601_data = {
+ .id = 1,
+ .blocks = STMPE_BLOCK_KEYPAD,
+ .irq_trigger = IRQF_TRIGGER_FALLING,
+ .irq_base = MOP500_STMPE1601_IRQ(0),
+ .keypad = &stmpe1601_keypad_data,
+ .autosleep = true,
+ .autosleep_timeout = 1024,
+};
+
+static struct i2c_board_info mop500_i2c0_devices_stuib[] = {
+ {
+ I2C_BOARD_INFO("stmpe1601", 0x40),
+ .irq = NOMADIK_GPIO_TO_IRQ(218),
+ .platform_data = &stmpe1601_data,
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+
+/*
+ * TC35893
+ */
+
+static const unsigned int uib_keymap[] = {
+ KEY(3, 1, KEY_END),
+ KEY(4, 1, KEY_POWER),
+ KEY(6, 4, KEY_VOLUMEDOWN),
+ KEY(4, 2, KEY_EMAIL),
+ KEY(3, 3, KEY_RIGHT),
+ KEY(2, 5, KEY_BACKSPACE),
+
+ KEY(6, 7, KEY_MENU),
+ KEY(5, 0, KEY_ENTER),
+ KEY(4, 3, KEY_0),
+ KEY(3, 4, KEY_DOT),
+ KEY(5, 2, KEY_UP),
+ KEY(3, 5, KEY_DOWN),
+
+ KEY(4, 5, KEY_SEND),
+ KEY(0, 5, KEY_BACK),
+ KEY(6, 2, KEY_VOLUMEUP),
+ KEY(1, 3, KEY_SPACE),
+ KEY(7, 6, KEY_LEFT),
+ KEY(5, 5, KEY_SEARCH),
+};
+
+static struct matrix_keymap_data uib_keymap_data = {
+ .keymap = uib_keymap,
+ .keymap_size = ARRAY_SIZE(uib_keymap),
+};
+
+static struct tc3589x_keypad_platform_data tc35893_data = {
+ .krow = TC_KPD_ROWS,
+ .kcol = TC_KPD_COLUMNS,
+ .debounce_period = TC_KPD_DEBOUNCE_PERIOD,
+ .settle_time = TC_KPD_SETTLE_TIME,
+ .irqtype = IRQF_TRIGGER_FALLING,
+ .enable_wakeup = true,
+ .keymap_data = &uib_keymap_data,
+ .no_autorepeat = true,
+};
+
+static struct tc3589x_platform_data tc3589x_keypad_data = {
+ .block = TC3589x_BLOCK_KEYPAD,
+ .keypad = &tc35893_data,
+ .irq_base = MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct i2c_board_info mop500_i2c0_devices_uib[] = {
+ {
+ I2C_BOARD_INFO("tc3589x", 0x44),
+ .platform_data = &tc3589x_keypad_data,
+ .irq = NOMADIK_GPIO_TO_IRQ(218),
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+
+void mop500_keypad_init(void)
+{
+ db8500_add_ske_keypad(&ske_keypad_board);
+
+ i2c_register_board_info(0, mop500_i2c0_devices_stuib,
+ ARRAY_SIZE(mop500_i2c0_devices_stuib));
+
+ i2c_register_board_info(0, mop500_i2c0_devices_uib,
+ ARRAY_SIZE(mop500_i2c0_devices_uib));
+
+}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index bac9956..4b99667 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -16,10 +16,24 @@
#include <mach/devices.h>
#include <mach/hardware.h>
+#include "devices-db8500.h"
#include "pins-db8500.h"
#include "board-mop500.h"
static pin_cfg_t mop500_sdi_pins[] = {
+ /* SDI0 (MicroSD slot) */
+ GPIO18_MC0_CMDDIR,
+ GPIO19_MC0_DAT0DIR,
+ GPIO20_MC0_DAT2DIR,
+ GPIO21_MC0_DAT31DIR,
+ GPIO22_MC0_FBCLK,
+ GPIO23_MC0_CLK,
+ GPIO24_MC0_CMD,
+ GPIO25_MC0_DAT0,
+ GPIO26_MC0_DAT1,
+ GPIO27_MC0_DAT2,
+ GPIO28_MC0_DAT3,
+
/* SDI4 (on-board eMMC) */
GPIO197_MC4_DAT3,
GPIO198_MC4_DAT2,
@@ -50,6 +64,55 @@
};
/*
+ * SDI 0 (MicroSD slot)
+ */
+
+/* MMCIPOWER bits */
+#define MCI_DATA2DIREN (1 << 2)
+#define MCI_CMDDIREN (1 << 3)
+#define MCI_DATA0DIREN (1 << 4)
+#define MCI_DATA31DIREN (1 << 5)
+#define MCI_FBCLKEN (1 << 7)
+
+static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
+ unsigned char power_mode)
+{
+ if (power_mode == MMC_POWER_UP)
+ gpio_set_value_cansleep(GPIO_SDMMC_EN, 1);
+ else if (power_mode == MMC_POWER_OFF)
+ gpio_set_value_cansleep(GPIO_SDMMC_EN, 0);
+
+ return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |
+ MCI_DATA2DIREN | MCI_DATA31DIREN;
+}
+
+static struct mmci_platform_data mop500_sdi0_data = {
+ .vdd_handler = mop500_sdi0_vdd_handler,
+ .ocr_mask = MMC_VDD_29_30,
+ .f_max = 100000000,
+ .capabilities = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = GPIO_SDMMC_CD,
+ .gpio_wp = -1,
+};
+
+void mop500_sdi_tc35892_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_SDMMC_EN, "SDMMC_EN");
+ if (!ret)
+ ret = gpio_request(GPIO_SDMMC_1V8_3V_SEL,
+ "GPIO_SDMMC_1V8_3V_SEL");
+ if (ret)
+ return;
+
+ gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 1);
+ gpio_direction_output(GPIO_SDMMC_EN, 0);
+
+ db8500_add_sdi0(&mop500_sdi0_data);
+}
+
+/*
* SDI 2 (POP eMMC, not on DB8500ed)
*/
@@ -74,18 +137,24 @@
.gpio_wp = -1,
};
-void mop500_sdi_init(void)
+void __init mop500_sdi_init(void)
{
nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));
- u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data;
- u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data;
+ /*
+ * sdi0 will finally be added when the TC35892 initializes and calls
+ * mop500_sdi_tc35892_init() above.
+ */
+ /* PoP:ed eMMC */
if (!cpu_is_u8500ed()) {
nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));
- amba_device_register(&u8500_sdi2_device, &iomem_resource);
+ /* POP eMMC on v1.0 has problems with high speed */
+ if (!cpu_is_u8500v10())
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+ db8500_add_sdi2(&mop500_sdi2_data);
}
/* On-board eMMC */
- amba_device_register(&u8500_sdi4_device, &iomem_resource);
+ db8500_add_sdi4(&mop500_sdi4_data);
}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index cac83a6..a1c9ea1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,25 +13,26 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ab8500.h>
-#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/tc3589x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/pincfg.h>
#include <plat/i2c.h>
-#include <plat/ske.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
+#include "devices-db8500.h"
#include "pins-db8500.h"
#include "board-mop500.h"
@@ -69,22 +70,12 @@
GPIO166_KP_O2,
GPIO167_KP_O1,
GPIO168_KP_O0,
-};
-static void ab4500_spi_cs_control(u32 command)
-{
- /* set the FRM signal, which is CS - TODO */
-}
+ /* GPIO_EXP_INT */
+ GPIO217_GPIO,
-struct pl022_config_chip ab4500_chip_info = {
- .com_mode = INTERRUPT_TRANSFER,
- .iface = SSP_INTERFACE_MOTOROLA_SPI,
- /* we can act as master only */
- .hierarchy = SSP_MASTER,
- .slave_tx_disable = 0,
- .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
- .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
- .cs_control = ab4500_spi_cs_control,
+ /* STMPE1601 IRQ */
+ GPIO218_GPIO | PIN_INPUT_PULLUP,
};
static struct ab8500_platform_data ab8500_platdata = {
@@ -93,9 +84,9 @@
static struct resource ab8500_resources[] = {
[0] = {
- .start = IRQ_AB8500,
- .end = IRQ_AB8500,
- .flags = IORESOURCE_IRQ
+ .start = IRQ_DB8500_AB8500,
+ .end = IRQ_DB8500_AB8500,
+ .flags = IORESOURCE_IRQ
}
};
@@ -109,19 +100,6 @@
.resource = ab8500_resources,
};
-static struct spi_board_info ab8500_spi_devices[] = {
- {
- .modalias = "ab8500-spi",
- .controller_data = &ab4500_chip_info,
- .platform_data = &ab8500_platdata,
- .max_speed_hz = 12000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_3,
- .irq = IRQ_DB8500_AB8500,
- },
-};
-
static struct pl022_ssp_controller ssp0_platform_data = {
.bus_id = 0,
/* pl022 not yet supports dma */
@@ -132,6 +110,34 @@
.num_chipselect = 5,
};
+/*
+ * TC35892
+ */
+
+static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
+{
+ mop500_sdi_tc35892_init();
+}
+
+static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
+ .gpio_base = MOP500_EGPIO(0),
+ .setup = mop500_tc35892_init,
+};
+
+static struct tc3589x_platform_data mop500_tc35892_data = {
+ .block = TC3589x_BLOCK_GPIO,
+ .gpio = &mop500_tc35892_gpio_data,
+ .irq_base = MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct i2c_board_info mop500_i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("tc3589x", 0x42),
+ .irq = NOMADIK_GPIO_TO_IRQ(217),
+ .platform_data = &mop500_tc35892_data,
+ },
+};
+
#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
static struct nmk_i2c_controller u8500_i2c##id##_data = { \
/* \
@@ -161,159 +167,49 @@
U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-static struct amba_device *amba_devs[] __initdata = {
- &ux500_uart0_device,
- &ux500_uart1_device,
- &ux500_uart2_device,
- &u8500_ssp0_device,
-};
-
-static const unsigned int ux500_keymap[] = {
- KEY(2, 5, KEY_END),
- KEY(4, 1, KEY_POWER),
- KEY(3, 5, KEY_VOLUMEDOWN),
- KEY(1, 3, KEY_3),
- KEY(5, 2, KEY_RIGHT),
- KEY(5, 0, KEY_9),
-
- KEY(0, 5, KEY_MENU),
- KEY(7, 6, KEY_ENTER),
- KEY(4, 5, KEY_0),
- KEY(6, 7, KEY_2),
- KEY(3, 4, KEY_UP),
- KEY(3, 3, KEY_DOWN),
-
- KEY(6, 4, KEY_SEND),
- KEY(6, 2, KEY_BACK),
- KEY(4, 2, KEY_VOLUMEUP),
- KEY(5, 5, KEY_1),
- KEY(4, 3, KEY_LEFT),
- KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data ux500_keymap_data = {
- .keymap = ux500_keymap,
- .keymap_size = ARRAY_SIZE(ux500_keymap),
-};
-
-/*
- * Nomadik SKE keypad
- */
-#define ROW_PIN_I0 164
-#define ROW_PIN_I1 163
-#define ROW_PIN_I2 162
-#define ROW_PIN_I3 161
-#define ROW_PIN_I4 156
-#define ROW_PIN_I5 155
-#define ROW_PIN_I6 154
-#define ROW_PIN_I7 153
-#define COL_PIN_O0 168
-#define COL_PIN_O1 167
-#define COL_PIN_O2 166
-#define COL_PIN_O3 165
-#define COL_PIN_O4 160
-#define COL_PIN_O5 159
-#define COL_PIN_O6 158
-#define COL_PIN_O7 157
-
-#define SKE_KPD_MAX_ROWS 8
-#define SKE_KPD_MAX_COLS 8
-
-static int ske_kp_rows[] = {
- ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
- ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
-};
-
-/*
- * ske_set_gpio_row: request and set gpio rows
- */
-static int ske_set_gpio_row(int gpio)
+static void __init mop500_i2c_init(void)
{
- int ret;
-
- ret = gpio_request(gpio, "ske-kp");
- if (ret < 0) {
- pr_err("ske_set_gpio_row: gpio request failed\n");
- return ret;
- }
-
- ret = gpio_direction_output(gpio, 1);
- if (ret < 0) {
- pr_err("ske_set_gpio_row: gpio direction failed\n");
- gpio_free(gpio);
- }
-
- return ret;
+ db8500_add_i2c0(&u8500_i2c0_data);
+ db8500_add_i2c1(&u8500_i2c1_data);
+ db8500_add_i2c2(&u8500_i2c2_data);
+ db8500_add_i2c3(&u8500_i2c3_data);
}
-/*
- * ske_kp_init - enable the gpio configuration
- */
-static int ske_kp_init(void)
-{
- int ret, i;
-
- for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
- ret = ske_set_gpio_row(ske_kp_rows[i]);
- if (ret < 0) {
- pr_err("ske_kp_init: failed init\n");
- return ret;
- }
- }
-
- return 0;
-}
-
-static struct ske_keypad_platform_data ske_keypad_board = {
- .init = ske_kp_init,
- .keymap_data = &ux500_keymap_data,
- .no_autorepeat = true,
- .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */
- .kcol = SKE_KPD_MAX_COLS,
- .debounce_ms = 40, /* in millsecs */
-};
-
-
-
/* add any platform devices here - TODO */
static struct platform_device *platform_devs[] __initdata = {
- &u8500_i2c0_device,
- &ux500_i2c1_device,
- &ux500_i2c2_device,
- &ux500_i2c3_device,
- &ux500_ske_keypad_device,
};
+static void __init mop500_spi_init(void)
+{
+ db8500_add_ssp0(&ssp0_platform_data);
+}
+
+static void __init mop500_uart_init(void)
+{
+ db8500_add_uart0();
+ db8500_add_uart1();
+ db8500_add_uart2();
+}
+
static void __init u8500_init_machine(void)
{
- int i;
-
u8500_init_devices();
nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
- u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
- ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
- ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
- ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
- ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board;
-
- u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
-
- /* Register the active AMBA devices on this board */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+ mop500_i2c_init();
mop500_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
- /* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */
- if (cpu_is_u8500ed() || cpu_is_u8500v10())
- spi_register_board_info(ab8500_spi_devices,
- ARRAY_SIZE(ab8500_spi_devices));
- else /* If HW is v.1.1 or later use I2C to access AB8500 */
- platform_device_register(&ab8500_device);
+ mop500_keypad_init();
+
+ platform_device_register(&ab8500_device);
+
+ i2c_register_board_info(0, mop500_i2c0_devices,
+ ARRAY_SIZE(mop500_i2c0_devices));
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 2d24032..3104ae2 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,6 +7,15 @@
#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H
+#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
+
+/* GPIOs on the TC35892 expander */
+#define GPIO_SDMMC_CD MOP500_EGPIO(3)
+#define GPIO_SDMMC_EN MOP500_EGPIO(17)
+#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
+
extern void mop500_sdi_init(void);
+extern void mop500_sdi_tc35892_init(void);
+extern void mop500_keypad_init(void);
#endif
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
new file mode 100644
index 0000000..54712ac
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <ulf.hansson@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/amba/mmci.h>
+#include <linux/mmc/host.h>
+#include <linux/gpio.h>
+
+#include <plat/pincfg.h>
+#include <mach/db5500-regs.h>
+#include <plat/ste_dma40.h>
+
+#include "pins-db5500.h"
+#include "devices-db5500.h"
+#include "ste-dma40-db5500.h"
+
+static pin_cfg_t u5500_sdi_pins[] = {
+ /* SDI0 (POP eMMC) */
+ GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW,
+};
+
+static struct mmci_platform_data u5500_sdi0_data = {
+ .ocr_mask = MMC_VDD_165_195,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED,
+ .gpio_cd = -1,
+ .gpio_wp = -1,
+};
+
+void __init u5500_sdi_init(void)
+{
+ nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
+
+ db5500_add_sdi0(&u5500_sdi0_data);
+}
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 1ca094a..39d370c 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/gpio.h>
+#include <linux/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -17,20 +18,24 @@
#include <mach/devices.h>
#include <mach/setup.h>
-static struct amba_device *amba_board_devs[] __initdata = {
- &ux500_uart0_device,
- &ux500_uart1_device,
- &ux500_uart2_device,
-};
+#include "devices-db5500.h"
+
+static void __init u5500_uart_init(void)
+{
+ db5500_add_uart0();
+ db5500_add_uart1();
+ db5500_add_uart2();
+}
static void __init u5500_init_machine(void)
{
u5500_init_devices();
- amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs));
+ u5500_sdi_init();
+ u5500_uart_init();
}
-MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
+MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
.boot_params = 0x00000100,
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 531de5c..ccff2dae1 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -19,6 +19,12 @@
#include <mach/hardware.h>
#include "clock.h"
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h> /* for copy_from_user */
+static LIST_HEAD(clk_list);
+#endif
+
#define PRCC_PCKEN 0x00
#define PRCC_PCKDIS 0x04
#define PRCC_KCKEN 0x08
@@ -132,7 +138,7 @@
{
void __iomem *addr = __io_address(UX500_PRCMU_BASE)
+ PRCM_TCR;
- u32 tcr = readl(addr);
+ u32 tcr;
int mtu = (int) clk->data;
/*
* One of these is selected eventually
@@ -143,6 +149,14 @@
unsigned long mturate;
unsigned long retclk;
+ /*
+ * On a startup, always conifgure the TCR to the doze mode;
+ * bootloaders do it for us. Do this in the kernel too.
+ */
+ writel(PRCM_TCR_DOZE_MODE, addr);
+
+ tcr = readl(addr);
+
/* Get the rate from the parent as a default */
if (clk->parent_periph)
mturate = clk_get_rate(clk->parent_periph);
@@ -152,45 +166,6 @@
/* We need to be connected SOMEWHERE */
BUG();
- /*
- * Are we in doze mode?
- * In this mode the parent peripheral or the fixed 32768 Hz
- * clock is fed into the block.
- */
- if (!(tcr & PRCM_TCR_DOZE_MODE)) {
- /*
- * Here we're using the clock input from the APE ULP
- * clock domain. But first: are the timers stopped?
- */
- if (tcr & PRCM_TCR_STOPPED) {
- clk32k = 0;
- mturate = 0;
- } else {
- /* Else default mode: 0 and 2.4 MHz */
- clk32k = 0;
- if (cpu_is_u5500())
- /* DB5500 divides by 8 */
- mturate /= 8;
- else if (cpu_is_u8500ed()) {
- /*
- * This clocking setting must not be used
- * in the ED chip, it is simply not
- * connected anywhere!
- */
- mturate = 0;
- BUG();
- } else
- /*
- * In this mode the ulp38m4 clock is divided
- * by a factor 16, on the DB8500 typically
- * 38400000 / 16 ~ 2.4 MHz.
- * TODO: Replace the constant with a reference
- * to the ULP source once this is modeled.
- */
- mturate = 38400000 / 16;
- }
- }
-
/* Return the clock selected for this MTU */
if (tcr & (1 << mtu))
retclk = clk32k;
@@ -316,6 +291,7 @@
};
static struct clk clk_32khz = {
+ .name = "clk_32khz",
.rate = 32000,
};
@@ -365,94 +341,96 @@
*/
/* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL);
-static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
+static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL);
+static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL);
+static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
/* Peripheral Cluster #2 */
static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL);
-static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk);
static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL);
-static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL);
+static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL);
-static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk);
/* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
+static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
+static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
+static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
+static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
/* Peripheral Cluster #4 is in the always on domain */
/* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk);
-static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL);
+static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
+static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL);
/* Peripheral Cluster #6 */
/* MTU ID in data */
static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
-static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
-static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL);
-static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk);
-static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk);
+static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
+static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
+static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL);
+static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk);
/* Peripheral Cluster #7 */
-static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
+static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
/* MTU ID in data */
static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
-static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
+static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
+static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
-static struct clk clk_dummy_apb_pclk;
+static struct clk clk_dummy_apb_pclk = {
+ .name = "apb_pclk",
+};
static struct clk_lookup u8500_common_clks[] = {
CLK(dummy_apb_pclk, NULL, "apb_pclk"),
@@ -553,7 +531,7 @@
static struct clk_lookup u8500_v1_clks[] = {
/* Peripheral Cluster #1 */
- CLK(i2c4, "nmk-i2c.4", NULL),
+ CLK(i2c4, "nmk-i2c.4", NULL),
CLK(spi3_v1, "spi3", NULL),
CLK(msp1_v1, "msp1", NULL),
@@ -598,6 +576,183 @@
CLK(uiccclk, "uicc", NULL),
};
+#ifdef CONFIG_DEBUG_FS
+/*
+ * debugfs support to trace clock tree hierarchy and attributes with
+ * powerdebug
+ */
+static struct dentry *clk_debugfs_root;
+
+void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
+{
+ while (num--) {
+ /* Check that the clock has not been already registered */
+ if (!(cl->clk->list.prev != cl->clk->list.next))
+ list_add_tail(&cl->clk->list, &clk_list);
+
+ cl++;
+ }
+}
+
+static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
+ size_t size, loff_t *off)
+{
+ struct clk *clk = file->f_dentry->d_inode->i_private;
+ char cusecount[128];
+ unsigned int len;
+
+ len = sprintf(cusecount, "%u\n", clk->enabled);
+ return simple_read_from_buffer(buf, size, off, cusecount, len);
+}
+
+static ssize_t rate_dbg_read(struct file *file, char __user *buf,
+ size_t size, loff_t *off)
+{
+ struct clk *clk = file->f_dentry->d_inode->i_private;
+ char crate[128];
+ unsigned int rate;
+ unsigned int len;
+
+ rate = clk_get_rate(clk);
+ len = sprintf(crate, "%u\n", rate);
+ return simple_read_from_buffer(buf, size, off, crate, len);
+}
+
+static const struct file_operations usecount_fops = {
+ .read = usecount_dbg_read,
+};
+
+static const struct file_operations set_rate_fops = {
+ .read = rate_dbg_read,
+};
+
+static struct dentry *clk_debugfs_register_dir(struct clk *c,
+ struct dentry *p_dentry)
+{
+ struct dentry *d, *clk_d, *child, *child_tmp;
+ char s[255];
+ char *p = s;
+
+ if (c->name == NULL)
+ p += sprintf(p, "BUG");
+ else
+ p += sprintf(p, "%s", c->name);
+
+ clk_d = debugfs_create_dir(s, p_dentry);
+ if (!clk_d)
+ return NULL;
+
+ d = debugfs_create_file("usecount", S_IRUGO,
+ clk_d, c, &usecount_fops);
+ if (!d)
+ goto err_out;
+ d = debugfs_create_file("rate", S_IRUGO,
+ clk_d, c, &set_rate_fops);
+ if (!d)
+ goto err_out;
+ /*
+ * TODO : not currently available in ux500
+ * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
+ * if (!d)
+ * goto err_out;
+ */
+
+ return clk_d;
+
+err_out:
+ d = clk_d;
+ list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
+ debugfs_remove(child);
+ debugfs_remove(clk_d);
+ return NULL;
+}
+
+static void clk_debugfs_remove_dir(struct dentry *cdentry)
+{
+ struct dentry *d, *child, *child_tmp;
+
+ d = cdentry;
+ list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
+ debugfs_remove(child);
+ debugfs_remove(cdentry);
+ return ;
+}
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ struct clk *pa = c->parent_periph;
+ struct clk *bpa = c->parent_cluster;
+
+ if (!(bpa && !pa)) {
+ c->dent = clk_debugfs_register_dir(c,
+ pa ? pa->dent : clk_debugfs_root);
+ if (!c->dent)
+ return -ENOMEM;
+ }
+
+ if (bpa) {
+ c->dent_bus = clk_debugfs_register_dir(c,
+ bpa->dent_bus ? bpa->dent_bus : bpa->dent);
+ if ((!c->dent_bus) && (c->dent)) {
+ clk_debugfs_remove_dir(c->dent);
+ c->dent = NULL;
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent_periph;
+ struct clk *bpa = c->parent_cluster;
+
+ if (pa && (!pa->dent && !pa->dent_bus)) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (bpa && (!bpa->dent && !bpa->dent_bus)) {
+ err = clk_debugfs_register(bpa);
+ if (err)
+ return err;
+ }
+
+ if ((!c->dent) && (!c->dent_bus)) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clk_list, list) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+
+late_initcall(clk_debugfs_init);
+#endif /* defined(CONFIG_DEBUG_FS) */
+
int __init clk_init(void)
{
if (cpu_is_u8500ed()) {
@@ -608,7 +763,8 @@
/* Clock tree for U5500 not implemented yet */
clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
- clk_per6clk.rate = 26000000;
+ clk_uartclk.rate = 36360000;
+ clk_sdmmcclk.rate = 99900000;
}
clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
@@ -617,5 +773,12 @@
else
clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+#ifdef CONFIG_DEBUG_FS
+ clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
+ if (cpu_is_u8500ed())
+ clk_debugfs_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
+ else
+ clk_debugfs_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+#endif
return 0;
}
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index a058025..0744907 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -90,6 +90,10 @@
struct clk *parent_cluster;
struct clk *parent_periph;
+#if defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+ struct dentry *dent_bus; /* For visible tree hierarchy */
+#endif
};
#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 2f87075..acc841e 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -8,14 +8,19 @@
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <asm/mach/map.h>
+#include <plat/gpio.h>
+
#include <mach/hardware.h>
#include <mach/devices.h>
#include <mach/setup.h>
#include <mach/irqs.h>
+#include "devices-db5500.h"
+
static struct map_desc u5500_io_desc[] __initdata = {
__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
@@ -110,19 +115,32 @@
};
static struct platform_device *u5500_platform_devs[] __initdata = {
- &u5500_gpio_devs[0],
- &u5500_gpio_devs[1],
- &u5500_gpio_devs[2],
- &u5500_gpio_devs[3],
- &u5500_gpio_devs[4],
- &u5500_gpio_devs[5],
- &u5500_gpio_devs[6],
- &u5500_gpio_devs[7],
&mbox0_device,
&mbox1_device,
&mbox2_device,
};
+static resource_size_t __initdata db5500_gpio_base[] = {
+ U5500_GPIOBANK0_BASE,
+ U5500_GPIOBANK1_BASE,
+ U5500_GPIOBANK2_BASE,
+ U5500_GPIOBANK3_BASE,
+ U5500_GPIOBANK4_BASE,
+ U5500_GPIOBANK5_BASE,
+ U5500_GPIOBANK6_BASE,
+ U5500_GPIOBANK7_BASE,
+};
+
+static void __init db5500_add_gpios(void)
+{
+ struct nmk_gpio_platform_data pdata = {
+ /* No custom data yet */
+ };
+
+ dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+ IRQ_DB5500_GPIO0, &pdata);
+}
+
void __init u5500_map_io(void)
{
ux500_map_io();
@@ -132,7 +150,9 @@
void __init u5500_init_devices(void)
{
- ux500_init_devices();
+ db5500_add_gpios();
+ db5500_dma_init();
+ db5500_add_rtc();
platform_add_devices(u5500_platform_devs,
ARRAY_SIZE(u5500_platform_devs));
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 4acab75..c0f34a4 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -22,23 +22,15 @@
#include <mach/setup.h>
#include <mach/devices.h>
+#include "devices-db8500.h"
+
static struct platform_device *platform_devs[] __initdata = {
- &u8500_gpio_devs[0],
- &u8500_gpio_devs[1],
- &u8500_gpio_devs[2],
- &u8500_gpio_devs[3],
- &u8500_gpio_devs[4],
- &u8500_gpio_devs[5],
- &u8500_gpio_devs[6],
- &u8500_gpio_devs[7],
- &u8500_gpio_devs[8],
&u8500_dma40_device,
};
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
@@ -46,13 +38,18 @@
__MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M),
};
-static struct map_desc u8500ed_io_desc[] __initdata = {
+static struct map_desc u8500_ed_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
};
-static struct map_desc u8500v1_io_desc[] __initdata = {
+static struct map_desc u8500_v1_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K),
+};
+
+static struct map_desc u8500_v2_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
};
/*
@@ -125,14 +122,38 @@
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
if (cpu_is_u8500ed())
- iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
- else
- iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
+ iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc));
+ else if (cpu_is_u8500v1())
+ iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
+ else if (cpu_is_u8500v2())
+ iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
/* Read out the ASIC ID as early as we can */
get_db8500_asic_id();
}
+static resource_size_t __initdata db8500_gpio_base[] = {
+ U8500_GPIOBANK0_BASE,
+ U8500_GPIOBANK1_BASE,
+ U8500_GPIOBANK2_BASE,
+ U8500_GPIOBANK3_BASE,
+ U8500_GPIOBANK4_BASE,
+ U8500_GPIOBANK5_BASE,
+ U8500_GPIOBANK6_BASE,
+ U8500_GPIOBANK7_BASE,
+ U8500_GPIOBANK8_BASE,
+};
+
+static void __init db8500_add_gpios(void)
+{
+ struct nmk_gpio_platform_data pdata = {
+ /* No custom data yet */
+ };
+
+ dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+ IRQ_DB8500_GPIO0, &pdata);
+}
+
/*
* This function is called from the board init
*/
@@ -152,12 +173,13 @@
else
pr_warning("ASIC: UNKNOWN SILICON VERSION!\n");
- ux500_init_devices();
-
if (cpu_is_u8500ed())
dma40_u8500ed_fixup();
- /* Register the platform devices */
+ db8500_add_rtc();
+ db8500_add_gpios();
+
+ platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
return ;
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 7328c01..5730409 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -6,7 +6,6 @@
*/
#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
#include <linux/io.h>
#include <linux/clk.h>
@@ -20,6 +19,7 @@
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
+#include <mach/prcmu.h>
#include "clock.h"
@@ -45,20 +45,11 @@
__IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
};
-static struct amba_device *ux500_amba_devs[] __initdata = {
- &ux500_pl031_device,
-};
-
void __init ux500_map_io(void)
{
iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
}
-void __init ux500_init_devices(void)
-{
- amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs));
-}
-
void __init ux500_init_irq(void)
{
gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE),
@@ -68,6 +59,8 @@
* Init clocks here so that they are available for system timer
* initialization.
*/
+ if (cpu_is_u8500())
+ prcmu_early_init();
clk_init();
}
diff --git a/arch/arm/mach-ux500/cpufreq.c b/arch/arm/mach-ux500/cpufreq.c
new file mode 100644
index 0000000..5c5b747
--- /dev/null
+++ b/arch/arm/mach-ux500/cpufreq.c
@@ -0,0 +1,211 @@
+/*
+ * CPU frequency scaling for u8500
+ * Inspired by linux/arch/arm/mach-davinci/cpufreq.c
+ *
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <mach/prcmu.h>
+#include <mach/prcmu-defs.h>
+
+#define DRIVER_NAME "cpufreq-u8500"
+#define CPUFREQ_NAME "u8500"
+
+static struct device *dev;
+
+static struct cpufreq_frequency_table freq_table[] = {
+ [0] = {
+ .index = 0,
+ .frequency = 200000,
+ },
+ [1] = {
+ .index = 1,
+ .frequency = 300000,
+ },
+ [2] = {
+ .index = 2,
+ .frequency = 600000,
+ },
+ [3] = {
+ /* Used for CPU_OPP_MAX, if available */
+ .index = 3,
+ .frequency = CPUFREQ_TABLE_END,
+ },
+ [4] = {
+ .index = 4,
+ .frequency = CPUFREQ_TABLE_END,
+ },
+};
+
+static enum prcmu_cpu_opp index2opp[] = {
+ CPU_OPP_EXT_CLK,
+ CPU_OPP_50,
+ CPU_OPP_100,
+ CPU_OPP_MAX
+};
+
+static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static int u8500_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ unsigned int index;
+ int ret = 0;
+
+ /*
+ * Ensure desired rate is within allowed range. Some govenors
+ * (ondemand) will just pass target_freq=0 to get the minimum.
+ */
+ if (target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+ if (target_freq > policy->cpuinfo.max_freq)
+ target_freq = policy->cpuinfo.max_freq;
+
+ ret = cpufreq_frequency_table_target(policy, freq_table,
+ target_freq, relation, &index);
+ if (ret < 0) {
+ dev_err(dev, "Could not look up next frequency\n");
+ return ret;
+ }
+
+ freqs.old = policy->cur;
+ freqs.new = freq_table[index].frequency;
+ freqs.cpu = policy->cpu;
+
+ if (freqs.old == freqs.new) {
+ dev_dbg(dev, "Current and target frequencies are equal\n");
+ return 0;
+ }
+
+ dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new);
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ ret = prcmu_set_cpu_opp(index2opp[index]);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set OPP level\n");
+ return ret;
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return ret;
+}
+
+static unsigned int u8500_cpufreq_getspeed(unsigned int cpu)
+{
+ int i;
+
+ for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++)
+ ;
+ return freq_table[i].frequency;
+}
+
+static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy)
+{
+ int res;
+
+ BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table));
+
+ if (cpu_is_u8500v2()) {
+ freq_table[1].frequency = 400000;
+ freq_table[2].frequency = 800000;
+ if (prcmu_has_arm_maxopp())
+ freq_table[3].frequency = 1000000;
+ }
+
+ /* get policy fields based on the table */
+ res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (!res)
+ cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+ else {
+ dev_err(dev, "u8500-cpufreq : Failed to read policy table\n");
+ return res;
+ }
+
+ policy->min = policy->cpuinfo.min_freq;
+ policy->max = policy->cpuinfo.max_freq;
+ policy->cur = u8500_cpufreq_getspeed(policy->cpu);
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /*
+ * FIXME : Need to take time measurement across the target()
+ * function with no/some/all drivers in the notification
+ * list.
+ */
+ policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */
+
+ /* policy sharing between dual CPUs */
+ cpumask_copy(policy->cpus, &cpu_present_map);
+
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+
+ return res;
+}
+
+static struct freq_attr *u8500_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+static int u8500_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct cpufreq_driver u8500_driver = {
+ .owner = THIS_MODULE,
+ .flags = CPUFREQ_STICKY,
+ .verify = u8500_cpufreq_verify_speed,
+ .target = u8500_cpufreq_target,
+ .get = u8500_cpufreq_getspeed,
+ .init = u8500_cpu_init,
+ .exit = u8500_cpu_exit,
+ .name = CPUFREQ_NAME,
+ .attr = u8500_cpufreq_attr,
+};
+
+static int __init u8500_cpufreq_probe(struct platform_device *pdev)
+{
+ dev = &pdev->dev;
+ return cpufreq_register_driver(&u8500_driver);
+}
+
+static int __exit u8500_cpufreq_remove(struct platform_device *pdev)
+{
+ return cpufreq_unregister_driver(&u8500_driver);
+}
+
+static struct platform_driver u8500_cpufreq_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(u8500_cpufreq_remove),
+};
+
+static int __init u8500_cpufreq_init(void)
+{
+ return platform_driver_probe(&u8500_cpufreq_driver,
+ &u8500_cpufreq_probe);
+}
+
+device_initcall(u8500_cpufreq_init);
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
new file mode 100644
index 0000000..fe69f5f
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+
+#include <plat/gpio.h>
+
+#include <mach/hardware.h>
+
+#include "devices-common.h"
+
+struct amba_device *
+dbx500_add_amba_device(const char *name, resource_size_t base,
+ int irq, void *pdata, unsigned int periphid)
+{
+ struct amba_device *dev;
+ int ret;
+
+ dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ dev->dev.init_name = name;
+
+ dev->res.start = base;
+ dev->res.end = base + SZ_4K - 1;
+ dev->res.flags = IORESOURCE_MEM;
+
+ dev->dma_mask = DMA_BIT_MASK(32);
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ dev->irq[0] = irq;
+ dev->irq[1] = NO_IRQ;
+
+ dev->periphid = periphid;
+
+ dev->dev.platform_data = pdata;
+
+ ret = amba_device_register(dev, &iomem_resource);
+ if (ret) {
+ kfree(dev);
+ return ERR_PTR(ret);
+ }
+
+ return dev;
+}
+
+static struct platform_device *
+dbx500_add_platform_device(const char *name, int id, void *pdata,
+ struct resource *res, int resnum)
+{
+ struct platform_device *dev;
+ int ret;
+
+ dev = platform_device_alloc(name, id);
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+
+ ret = platform_device_add_resources(dev, res, resnum);
+ if (ret)
+ goto out_free;
+
+ dev->dev.platform_data = pdata;
+
+ ret = platform_device_add(dev);
+ if (ret)
+ goto out_free;
+
+ return dev;
+
+out_free:
+ platform_device_put(dev);
+ return ERR_PTR(ret);
+}
+
+struct platform_device *
+dbx500_add_platform_device_4k1irq(const char *name, int id,
+ resource_size_t base,
+ int irq, void *pdata)
+{
+ struct resource resources[] = {
+ [0] = {
+ .start = base,
+ .end = base + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+
+ return dbx500_add_platform_device(name, id, pdata, resources,
+ ARRAY_SIZE(resources));
+}
+
+static struct platform_device *
+dbx500_add_gpio(int id, resource_size_t addr, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ struct resource resources[] = {
+ {
+ .start = addr,
+ .end = addr + 127,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+
+ return platform_device_register_resndata(NULL, "gpio", id,
+ resources, ARRAY_SIZE(resources),
+ pdata, sizeof(*pdata));
+}
+
+void dbx500_add_gpios(resource_size_t *base, int num, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ int first = 0;
+ int i;
+
+ for (i = 0; i < num; i++, first += 32, irq++) {
+ pdata->first_gpio = first;
+ pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
+
+ dbx500_add_gpio(i, base[i], irq, pdata);
+ }
+}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
new file mode 100644
index 0000000..cbadc11
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_COMMON_H
+#define __DEVICES_COMMON_H
+
+extern struct amba_device *
+dbx500_add_amba_device(const char *name, resource_size_t base,
+ int irq, void *pdata, unsigned int periphid);
+
+extern struct platform_device *
+dbx500_add_platform_device_4k1irq(const char *name, int id,
+ resource_size_t base,
+ int irq, void *pdata);
+
+struct spi_master_cntlr;
+
+static inline struct amba_device *
+dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+ struct spi_master_cntlr *pdata)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+static inline struct amba_device *
+dbx500_add_spi(const char *name, resource_size_t base, int irq,
+ struct spi_master_cntlr *pdata)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+struct mmci_platform_data;
+
+static inline struct amba_device *
+dbx500_add_sdi(const char *name, resource_size_t base, int irq,
+ struct mmci_platform_data *pdata)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+static inline struct amba_device *
+dbx500_add_uart(const char *name, resource_size_t base, int irq)
+{
+ return dbx500_add_amba_device(name, base, irq, NULL, 0);
+}
+
+struct nmk_i2c_controller;
+
+static inline struct platform_device *
+dbx500_add_i2c(int id, resource_size_t base, int irq,
+ struct nmk_i2c_controller *pdata)
+{
+ return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
+ pdata);
+}
+
+struct msp_i2s_platform_data;
+
+static inline struct platform_device *
+dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
+ struct msp_i2s_platform_data *pdata)
+{
+ return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq,
+ pdata);
+}
+
+static inline struct amba_device *
+dbx500_add_rtc(resource_size_t base, int irq)
+{
+ return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+}
+
+struct nmk_gpio_platform_data;
+
+void dbx500_add_gpios(resource_size_t *base, int num, int irq,
+ struct nmk_gpio_platform_data *pdata);
+
+#endif
diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c
deleted file mode 100644
index 33e5b56..0000000
--- a/arch/arm/mach-ux500/devices-db5500.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-
-static struct nmk_gpio_platform_data u5500_gpio_data[] = {
- GPIO_DATA("GPIO-0-31", 0),
- GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */
- GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */
- GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */
- GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */
- GPIO_DATA("GPIO-160-191", 160),
- GPIO_DATA("GPIO-192-223", 192),
- GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */
-};
-
-static struct resource u5500_gpio_resources[] = {
- GPIO_RESOURCE(0),
- GPIO_RESOURCE(1),
- GPIO_RESOURCE(2),
- GPIO_RESOURCE(3),
- GPIO_RESOURCE(4),
- GPIO_RESOURCE(5),
- GPIO_RESOURCE(6),
- GPIO_RESOURCE(7),
-};
-
-struct platform_device u5500_gpio_devs[] = {
- GPIO_DEVICE(0),
- GPIO_DEVICE(1),
- GPIO_DEVICE(2),
- GPIO_DEVICE(3),
- GPIO_DEVICE(4),
- GPIO_DEVICE(5),
- GPIO_DEVICE(6),
- GPIO_DEVICE(7),
-};
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
new file mode 100644
index 0000000..c8d7901
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_DB5500_H
+#define __DEVICES_DB5500_H
+
+#include "devices-common.h"
+
+#define db5500_add_i2c1(pdata) \
+ dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(pdata) \
+ dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(pdata) \
+ dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+
+#define db5500_add_msp0_i2s(pdata) \
+ dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_i2s(pdata) \
+ dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_i2s(pdata) \
+ dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+
+#define db5500_add_msp0_spi(pdata) \
+ dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(pdata) \
+ dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(pdata) \
+ dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+
+#define db5500_add_rtc() \
+ dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+
+#define db5500_add_sdi0(pdata) \
+ dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata)
+#define db5500_add_sdi1(pdata) \
+ dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata)
+#define db5500_add_sdi2(pdata) \
+ dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata)
+#define db5500_add_sdi3(pdata) \
+ dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata)
+#define db5500_add_sdi4(pdata) \
+ dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata)
+
+#define db5500_add_spi0(pdata) \
+ dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata)
+#define db5500_add_spi1(pdata) \
+ dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata)
+#define db5500_add_spi2(pdata) \
+ dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata)
+#define db5500_add_spi3(pdata) \
+ dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata)
+
+#define db5500_add_uart0() \
+ dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0)
+#define db5500_add_uart1() \
+ dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1)
+#define db5500_add_uart2() \
+ dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2)
+#define db5500_add_uart3() \
+ dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3)
+
+#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 4a94be3..23c695d5 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -19,173 +19,6 @@
#include "ste-dma40-db8500.h"
-static struct nmk_gpio_platform_data u8500_gpio_data[] = {
- GPIO_DATA("GPIO-0-31", 0),
- GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
- GPIO_DATA("GPIO-64-95", 64),
- GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */
- GPIO_DATA("GPIO-128-159", 128),
- GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */
- GPIO_DATA("GPIO-192-223", 192),
- GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */
- GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */
-};
-
-static struct resource u8500_gpio_resources[] = {
- GPIO_RESOURCE(0),
- GPIO_RESOURCE(1),
- GPIO_RESOURCE(2),
- GPIO_RESOURCE(3),
- GPIO_RESOURCE(4),
- GPIO_RESOURCE(5),
- GPIO_RESOURCE(6),
- GPIO_RESOURCE(7),
- GPIO_RESOURCE(8),
-};
-
-struct platform_device u8500_gpio_devs[] = {
- GPIO_DEVICE(0),
- GPIO_DEVICE(1),
- GPIO_DEVICE(2),
- GPIO_DEVICE(3),
- GPIO_DEVICE(4),
- GPIO_DEVICE(5),
- GPIO_DEVICE(6),
- GPIO_DEVICE(7),
- GPIO_DEVICE(8),
-};
-
-struct amba_device u8500_ssp0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "ssp0",
- },
- .res = {
- .start = U8500_SSP0_BASE,
- .end = U8500_SSP0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DB8500_SSP0, NO_IRQ },
- /* ST-Ericsson modified id */
- .periphid = SSP_PER_ID,
-};
-
-static struct resource u8500_i2c0_resources[] = {
- [0] = {
- .start = U8500_I2C0_BASE,
- .end = U8500_I2C0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DB8500_I2C0,
- .end = IRQ_DB8500_I2C0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device u8500_i2c0_device = {
- .name = "nmk-i2c",
- .id = 0,
- .resource = u8500_i2c0_resources,
- .num_resources = ARRAY_SIZE(u8500_i2c0_resources),
-};
-
-static struct resource u8500_i2c4_resources[] = {
- [0] = {
- .start = U8500_I2C4_BASE,
- .end = U8500_I2C4_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DB8500_I2C4,
- .end = IRQ_DB8500_I2C4,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device u8500_i2c4_device = {
- .name = "nmk-i2c",
- .id = 4,
- .resource = u8500_i2c4_resources,
- .num_resources = ARRAY_SIZE(u8500_i2c4_resources),
-};
-
-/*
- * SD/MMC
- */
-
-struct amba_device u8500_sdi0_device = {
- .dev = {
- .init_name = "sdi0",
- },
- .res = {
- .start = U8500_SDI0_BASE,
- .end = U8500_SDI0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DB8500_SDMMC0, NO_IRQ},
-};
-
-struct amba_device u8500_sdi1_device = {
- .dev = {
- .init_name = "sdi1",
- },
- .res = {
- .start = U8500_SDI1_BASE,
- .end = U8500_SDI1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DB8500_SDMMC1, NO_IRQ},
-};
-
-struct amba_device u8500_sdi2_device = {
- .dev = {
- .init_name = "sdi2",
- },
- .res = {
- .start = U8500_SDI2_BASE,
- .end = U8500_SDI2_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DB8500_SDMMC2, NO_IRQ},
-};
-
-struct amba_device u8500_sdi3_device = {
- .dev = {
- .init_name = "sdi3",
- },
- .res = {
- .start = U8500_SDI3_BASE,
- .end = U8500_SDI3_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DB8500_SDMMC3, NO_IRQ},
-};
-
-struct amba_device u8500_sdi4_device = {
- .dev = {
- .init_name = "sdi4",
- },
- .res = {
- .start = U8500_SDI4_BASE,
- .end = U8500_SDI4_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DB8500_SDMMC4, NO_IRQ},
-};
-
-struct amba_device u8500_sdi5_device = {
- .dev = {
- .init_name = "sdi5",
- },
- .res = {
- .start = U8500_SDI5_BASE,
- .end = U8500_SDI5_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DB8500_SDMMC5, NO_IRQ},
-};
-
static struct resource dma40_resources[] = {
[0] = {
.start = U8500_DMA_BASE,
@@ -295,7 +128,7 @@
},
};
-struct platform_device ux500_ske_keypad_device = {
+struct platform_device u8500_ske_keypad_device = {
.name = "nmk-ske-keypad",
.id = -1,
.num_resources = ARRAY_SIZE(keypad_resources),
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
new file mode 100644
index 0000000..3a770c7
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_DB8500_H
+#define __DEVICES_DB8500_H
+
+#include "devices-common.h"
+
+struct ske_keypad_platform_data;
+struct pl022_ssp_controller;
+
+static inline struct platform_device *
+db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+{
+ return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
+ U8500_SKE_BASE,
+ IRQ_DB8500_KB, pdata);
+}
+
+static inline struct amba_device *
+db8500_add_ssp(const char *name, resource_size_t base, int irq,
+ struct pl022_ssp_controller *pdata)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID);
+}
+
+
+#define db8500_add_i2c0(pdata) \
+ dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(pdata) \
+ dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(pdata) \
+ dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(pdata) \
+ dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(pdata) \
+ dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(pdata) \
+ dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(pdata) \
+ dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(pdata) \
+ dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(pdata) \
+ dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(pdata) \
+ dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(pdata) \
+ dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(pdata) \
+ dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(pdata) \
+ dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc() \
+ dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_sdi0(pdata) \
+ dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata)
+#define db8500_add_sdi1(pdata) \
+ dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata)
+#define db8500_add_sdi2(pdata) \
+ dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata)
+#define db8500_add_sdi3(pdata) \
+ dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata)
+#define db8500_add_sdi4(pdata) \
+ dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata)
+#define db8500_add_sdi5(pdata) \
+ dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata)
+
+#define db8500_add_ssp0(pdata) \
+ db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(pdata) \
+ db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(pdata) \
+ dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata)
+#define db8500_add_spi1(pdata) \
+ dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata)
+#define db8500_add_spi2(pdata) \
+ dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata)
+#define db8500_add_spi3(pdata) \
+ dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata)
+
+#define db8500_add_uart0() \
+ dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0)
+#define db8500_add_uart1() \
+ dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1)
+#define db8500_add_uart2() \
+ dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2)
+
+#endif
diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c
index 8a26889..ea0a2f9 100644
--- a/arch/arm/mach-ux500/devices.c
+++ b/arch/arm/mach-ux500/devices.c
@@ -14,69 +14,6 @@
#include <mach/hardware.h>
#include <mach/setup.h>
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
-struct amba_device ux500_pl031_device = {
- .dev = {
- .init_name = "pl031",
- },
- .res = {
- .start = UX500_RTC_BASE,
- .end = UX500_RTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_RTC_RTT, NO_IRQ},
-};
-
-struct amba_device ux500_uart0_device = {
- .dev = { .init_name = "uart0" },
- __MEM_4K_RESOURCE(UX500_UART0_BASE),
- .irq = {IRQ_UART0, NO_IRQ},
-};
-
-struct amba_device ux500_uart1_device = {
- .dev = { .init_name = "uart1" },
- __MEM_4K_RESOURCE(UX500_UART1_BASE),
- .irq = {IRQ_UART1, NO_IRQ},
-};
-
-struct amba_device ux500_uart2_device = {
- .dev = { .init_name = "uart2" },
- __MEM_4K_RESOURCE(UX500_UART2_BASE),
- .irq = {IRQ_UART2, NO_IRQ},
-};
-
-#define UX500_I2C_RESOURCES(id, size) \
-static struct resource ux500_i2c##id##_resources[] = { \
- [0] = { \
- .start = UX500_I2C##id##_BASE, \
- .end = UX500_I2C##id##_BASE + size - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- [1] = { \
- .start = IRQ_I2C##id, \
- .end = IRQ_I2C##id, \
- .flags = IORESOURCE_IRQ \
- } \
-}
-
-UX500_I2C_RESOURCES(1, SZ_4K);
-UX500_I2C_RESOURCES(2, SZ_4K);
-UX500_I2C_RESOURCES(3, SZ_4K);
-
-#define UX500_I2C_PDEVICE(cid) \
-struct platform_device ux500_i2c##cid##_device = { \
- .name = "nmk-i2c", \
- .id = cid, \
- .num_resources = 2, \
- .resource = ux500_i2c##cid##_resources, \
-}
-
-UX500_I2C_PDEVICE(1);
-UX500_I2C_PDEVICE(2);
-UX500_I2C_PDEVICE(3);
-
void __init amba_add_devices(struct amba_device *devs[], int num)
{
int i;
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
new file mode 100644
index 0000000..32a061f
--- /dev/null
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/ste_dma40.h>
+#include <mach/setup.h>
+#include <mach/hardware.h>
+
+#include "ste-dma40-db5500.h"
+
+static struct resource dma40_resources[] = {
+ [0] = {
+ .start = U5500_DMA_BASE,
+ .end = U5500_DMA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "base",
+ },
+ [1] = {
+ .start = U5500_DMA_LCPA_BASE,
+ .end = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcpa",
+ },
+ [2] = {
+ .start = IRQ_DB5500_DMA,
+ .end = IRQ_DB5500_DMA,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+/* Default configuration for physical memcpy */
+static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .mode = STEDMA40_MODE_PHYSICAL,
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/* Default configuration for logical memcpy */
+static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/*
+ * Mapping between soruce event lines and physical device address This was
+ * created assuming that the event line is tied to a device and therefore the
+ * address is constant, however this is not true for at least USB, and the
+ * values are just placeholders for USB. This table is preserved and used for
+ * now.
+ */
+static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
+ [DB5500_DMA_DEV24_SDMMC0_RX] = -1,
+};
+
+/* Mapping between destination event lines and physical device address */
+static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
+ [DB5500_DMA_DEV24_SDMMC0_TX] = -1,
+};
+
+static int dma40_memcpy_event[] = {
+ DB5500_DMA_MEMCPY_TX_1,
+ DB5500_DMA_MEMCPY_TX_2,
+ DB5500_DMA_MEMCPY_TX_3,
+ DB5500_DMA_MEMCPY_TX_4,
+ DB5500_DMA_MEMCPY_TX_5,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+ .dev_len = ARRAY_SIZE(dma40_rx_map),
+ .dev_rx = dma40_rx_map,
+ .dev_tx = dma40_tx_map,
+ .memcpy = dma40_memcpy_event,
+ .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+ .memcpy_conf_phy = &dma40_memcpy_conf_phy,
+ .memcpy_conf_log = &dma40_memcpy_conf_log,
+ .disabled_channels = {-1},
+};
+
+static struct platform_device dma40_device = {
+ .dev = {
+ .platform_data = &dma40_plat_data,
+ },
+ .name = "dma40",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dma40_resources),
+ .resource = dma40_resources
+};
+
+void __init db5500_dma_init(void)
+{
+ int ret;
+
+ ret = platform_device_register(&dma40_device);
+ if (ret)
+ dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
+
+}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index 3eafc0e..bd88c1e 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -114,4 +114,8 @@
#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20)
#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F)
+#define U5500_ESRAM_BASE 0x40000000
+#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000
+#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
+
#endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index f07d098..0fefb34 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -92,7 +92,8 @@
#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
-#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000)
+#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
+#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
/* per3 base addresses */
#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index b91a4d1..020b636 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -14,27 +14,10 @@
extern struct platform_device u8500_gpio_devs[];
extern struct amba_device ux500_pl031_device;
-extern struct amba_device u8500_ssp0_device;
-extern struct amba_device ux500_uart0_device;
-extern struct amba_device ux500_uart1_device;
-extern struct amba_device ux500_uart2_device;
-extern struct platform_device ux500_i2c1_device;
-extern struct platform_device ux500_i2c2_device;
-extern struct platform_device ux500_i2c3_device;
-
-extern struct platform_device u8500_i2c0_device;
-extern struct platform_device u8500_i2c4_device;
extern struct platform_device u8500_dma40_device;
extern struct platform_device ux500_ske_keypad_device;
-extern struct amba_device u8500_sdi0_device;
-extern struct amba_device u8500_sdi1_device;
-extern struct amba_device u8500_sdi2_device;
-extern struct amba_device u8500_sdi3_device;
-extern struct amba_device u8500_sdi4_device;
-extern struct amba_device u8500_sdi5_device;
-
void dma40_u8500ed_fixup(void);
#endif
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index d548a62..3c4cd31 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -9,42 +9,4 @@
#include <plat/gpio.h>
-#define __GPIO_RESOURCE(soc, block) \
- { \
- .start = soc##_GPIOBANK##block##_BASE, \
- .end = soc##_GPIOBANK##block##_BASE + 127, \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = IRQ_GPIO##block, \
- .end = IRQ_GPIO##block, \
- .flags = IORESOURCE_IRQ, \
- }
-
-#define __GPIO_DEVICE(soc, block) \
- { \
- .name = "gpio", \
- .id = block, \
- .num_resources = 2, \
- .resource = &soc##_gpio_resources[block * 2], \
- .dev = { \
- .platform_data = &soc##_gpio_data[block], \
- }, \
- }
-
-#define GPIO_DATA(_name, first) \
- { \
- .name = _name, \
- .first_gpio = first, \
- .first_irq = NOMADIK_GPIO_TO_IRQ(first), \
- }
-
-#ifdef CONFIG_UX500_SOC_DB8500
-#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U8500, block)
-#define GPIO_DEVICE(block) __GPIO_DEVICE(u8500, block)
-#elif defined(CONFIG_UX500_SOC_DB5500)
-#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U5500, block)
-#define GPIO_DEVICE(block) __GPIO_DEVICE(u5500, block)
-#endif
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 32e883a..6295cc5 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -142,6 +142,8 @@
#endif
}
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
#endif
#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index cca4f70..7cdeb2a 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -8,12 +8,36 @@
#ifndef __MACH_IRQS_BOARD_MOP500_H
#define __MACH_IRQS_BOARD_MOP500_H
-#define AB8500_NR_IRQS 104
+/* Number of AB8500 irqs is taken from header file */
+#include <linux/mfd/ab8500.h>
#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START
#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
+ AB8500_NR_IRQS)
-#define MOP500_IRQ_END MOP500_AB8500_IRQ_END
+
+/* TC35892 */
+#define TC35892_NR_INTERNAL_IRQS 8
+#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x))
+#define TC35892_NR_GPIOS 24
+#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS)
+
+#define MOP500_EGPIO_NR_IRQS TC35892_NR_IRQS
+
+#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END
+#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \
+ + MOP500_EGPIO_NR_IRQS)
+/* STMPE1601 irqs */
+#define STMPE_NR_INTERNAL_IRQS 9
+#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
+#define STMPE_NR_GPIOS 24
+#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
+
+#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x))
+
+#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
+
+#define MOP500_IRQ_END MOP500_NR_IRQS
#if MOP500_IRQ_END > IRQ_BOARD_END
#undef IRQ_BOARD_END
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 693aa57..880ae45 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -21,50 +21,6 @@
/* Interrupt numbers generic for shared peripheral */
#define IRQ_MTU0 (IRQ_SHPI_START + 4)
-#define IRQ_SPI2 (IRQ_SHPI_START + 6)
-#define IRQ_SPI0 (IRQ_SHPI_START + 8)
-#define IRQ_UART0 (IRQ_SHPI_START + 11)
-#define IRQ_I2C3 (IRQ_SHPI_START + 12)
-#define IRQ_SSP0 (IRQ_SHPI_START + 14)
-#define IRQ_MTU1 (IRQ_SHPI_START + 17)
-#define IRQ_RTC_RTT (IRQ_SHPI_START + 18)
-#define IRQ_UART1 (IRQ_SHPI_START + 19)
-#define IRQ_I2C0 (IRQ_SHPI_START + 21)
-#define IRQ_I2C1 (IRQ_SHPI_START + 22)
-#define IRQ_USBOTG (IRQ_SHPI_START + 23)
-#define IRQ_DMA (IRQ_SHPI_START + 25)
-#define IRQ_UART2 (IRQ_SHPI_START + 26)
-#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29)
-#define IRQ_MSP0 (IRQ_SHPI_START + 31)
-#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32)
-#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33)
-#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34)
-#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35)
-#define IRQ_AB8500 (IRQ_SHPI_START + 40)
-#define IRQ_PRCMU (IRQ_SHPI_START + 47)
-#define IRQ_DISP (IRQ_SHPI_START + 48)
-#define IRQ_SiPI3 (IRQ_SHPI_START + 49)
-#define IRQ_I2C4 (IRQ_SHPI_START + 51)
-#define IRQ_SSP1 (IRQ_SHPI_START + 52)
-#define IRQ_I2C2 (IRQ_SHPI_START + 55)
-#define IRQ_SDMMC0 (IRQ_SHPI_START + 60)
-#define IRQ_MSP1 (IRQ_SHPI_START + 62)
-#define IRQ_SPI1 (IRQ_SHPI_START + 96)
-#define IRQ_MSP2 (IRQ_SHPI_START + 98)
-#define IRQ_SDMMC4 (IRQ_SHPI_START + 99)
-#define IRQ_HSIRD0 (IRQ_SHPI_START + 104)
-#define IRQ_HSIRD1 (IRQ_SHPI_START + 105)
-#define IRQ_HSITD0 (IRQ_SHPI_START + 106)
-#define IRQ_HSITD1 (IRQ_SHPI_START + 107)
-#define IRQ_GPIO0 (IRQ_SHPI_START + 119)
-#define IRQ_GPIO1 (IRQ_SHPI_START + 120)
-#define IRQ_GPIO2 (IRQ_SHPI_START + 121)
-#define IRQ_GPIO3 (IRQ_SHPI_START + 122)
-#define IRQ_GPIO4 (IRQ_SHPI_START + 123)
-#define IRQ_GPIO5 (IRQ_SHPI_START + 124)
-#define IRQ_GPIO6 (IRQ_SHPI_START + 125)
-#define IRQ_GPIO7 (IRQ_SHPI_START + 126)
-#define IRQ_GPIO8 (IRQ_SHPI_START + 127)
/* There are 128 shared peripheral interrupts assigned to
* INTID[160:32]. The first 32 interrupts are reserved.
diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h
similarity index 100%
rename from arch/arm/mach-ux500/include/mach/mbox.h
rename to arch/arm/mach-ux500/include/mach/mbox-db5500.h
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h
new file mode 100644
index 0000000..848ba64
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu-defs.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit definitions
+ */
+
+#ifndef __MACH_PRCMU_DEFS_H
+#define __MACH_PRCMU_DEFS_H
+
+enum prcmu_cpu_opp {
+ CPU_OPP_INIT = 0x00,
+ CPU_OPP_NO_CHANGE = 0x01,
+ CPU_OPP_100 = 0x02,
+ CPU_OPP_50 = 0x03,
+ CPU_OPP_MAX = 0x04,
+ CPU_OPP_EXT_CLK = 0x07
+};
+enum prcmu_ape_opp {
+ APE_OPP_NO_CHANGE = 0x00,
+ APE_OPP_100 = 0x02,
+ APE_OPP_50 = 0x03,
+};
+
+#endif /* __MACH_PRCMU_DEFS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
index 8885f39..455467e 100644
--- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h
+++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
@@ -1,10 +1,15 @@
/*
- * Copyright (c) 2009 ST-Ericsson SA
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit registers
*/
+
#ifndef __MACH_PRCMU_REGS_H
#define __MACH_PRCMU_REGS_H
@@ -88,4 +93,4 @@
/* Miscellaneous unit registers */
#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324)
-#endif /* __MACH_PRCMU__REGS_H */
+#endif /* __MACH_PRCMU_REGS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
index 549843f..c49e456 100644
--- a/arch/arm/mach-ux500/include/mach/prcmu.h
+++ b/arch/arm/mach-ux500/include/mach/prcmu.h
@@ -2,14 +2,27 @@
* Copyright (C) STMicroelectronics 2009
* Copyright (C) ST-Ericsson SA 2010
*
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ *
* License Terms: GNU General Public License v2
*
- * PRCMU f/w APIs
+ * PRCM Unit f/w API
*/
#ifndef __MACH_PRCMU_H
#define __MACH_PRCMU_H
+#include <mach/prcmu-defs.h>
+void __init prcmu_early_init(void);
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_set_ape_opp(enum prcmu_ape_opp opp);
+int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp);
+int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
+ enum prcmu_cpu_opp cpu_opp);
+int prcmu_get_ape_opp(void);
+int prcmu_get_cpu_opp(void);
+bool prcmu_has_arm_maxopp(void);
#endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 54bbe64..469877e 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,14 +18,19 @@
extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void);
-extern void __init ux500_init_devices(void);
extern void __init u5500_init_devices(void);
extern void __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
+
+extern void __init u5500_sdi_init(void);
+
+extern void __init db5500_dma_init(void);
+
/* We re-use nomadik_timer for this platform */
extern void nmdk_timer_init(void);
+struct amba_device;
extern void __init amba_add_devices(struct amba_device *devs[], int num);
struct sys_timer;
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 0271ca0..9a6614c 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -19,38 +19,43 @@
#define __ASM_ARCH_UNCOMPRESS_H
#include <asm/setup.h>
+#include <asm/mach-types.h>
#include <linux/io.h>
+#include <linux/amba/serial.h>
#include <mach/hardware.h>
-#define U8500_UART_DR 0x80007000
-#define U8500_UART_LCRH 0x8000702c
-#define U8500_UART_CR 0x80007030
-#define U8500_UART_FR 0x80007018
+static u32 ux500_uart_base;
static void putc(const char c)
{
/* Do nothing if the UART is not enabled. */
- if (!(__raw_readb(U8500_UART_CR) & 0x1))
+ if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1))
return;
if (c == '\n')
putc('\r');
- while (__raw_readb(U8500_UART_FR) & (1 << 5))
+ while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5))
barrier();
- __raw_writeb(c, U8500_UART_DR);
+ __raw_writeb(c, ux500_uart_base + UART01x_DR);
}
static void flush(void)
{
- if (!(__raw_readb(U8500_UART_CR) & 0x1))
+ if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1))
return;
- while (__raw_readb(U8500_UART_FR) & (1 << 3))
+ while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3))
barrier();
}
static inline void arch_decomp_setup(void)
{
+ if (machine_is_u8500())
+ ux500_uart_base = U8500_UART2_BASE;
+ else if (machine_is_u5500())
+ ux500_uart_base = U5500_UART0_BASE;
+ else /* not much can be done to help here */
+ ux500_uart_base = U8500_UART2_BASE;
}
#define arch_decomp_wdog() /* nothing to do here */
diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox-db5500.c
similarity index 99%
rename from arch/arm/mach-ux500/mbox.c
rename to arch/arm/mach-ux500/mbox-db5500.c
index 6343538..cbf1571 100644
--- a/arch/arm/mach-ux500/mbox.c
+++ b/arch/arm/mach-ux500/mbox-db5500.c
@@ -38,7 +38,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/completion.h>
-#include <mach/mbox.h>
+#include <mach/mbox-db5500.h>
#define MBOX_NAME "mbox"
diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem-irq-db5500.c
similarity index 100%
rename from arch/arm/mach-ux500/modem_irq.c
rename to arch/arm/mach-ux500/modem-irq-db5500.c
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 2115a0c..d77e76c 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -25,7 +25,7 @@
* control for which core is the next to come out of the secondary
* boot "holding pen"
*/
-volatile int __cpuinitdata pen_release = -1;
+volatile int pen_release = -1;
/*
* Write pen_release in a way that is guaranteed to be visible to all
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
index 293274d..c522d26 100644
--- a/arch/arm/mach-ux500/prcmu.c
+++ b/arch/arm/mach-ux500/prcmu.c
@@ -1,10 +1,14 @@
/*
- * Copyright (C) ST Ericsson SA 2010
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
*
- * U8500 PRCMU driver.
+ * U8500 PRCM Unit interface driver
+ *
*/
#include <linux/kernel.h>
#include <linux/module.h>
@@ -19,11 +23,26 @@
#include <mach/hardware.h>
#include <mach/prcmu-regs.h>
+#include <mach/prcmu-defs.h>
-#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE)
+/* Global var to runtime determine TCDM base for v2 or v1 */
+static __iomem void *tcdm_base;
-#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44)
-#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4)
+#define _MBOX_HEADER (tcdm_base + 0xFE8)
+#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0)
+
+#define REQ_MB1 (tcdm_base + 0xFD0)
+#define REQ_MB5 (tcdm_base + 0xE44)
+
+#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0)
+#define REQ_MB1_APEOPP (REQ_MB1 + 0x1)
+#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2)
+
+#define ACK_MB1 (tcdm_base + 0xE04)
+#define ACK_MB5 (tcdm_base + 0xDF4)
+
+#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0)
+#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1)
#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
@@ -33,10 +52,33 @@
#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
-#define I2C_WRITE(slave) ((slave) << 1)
-#define I2C_READ(slave) (((slave) << 1) | BIT(0))
+#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4)
+#define PRCM_AVS_ISMODEENABLE 7
+#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE)
+
+#define I2C_WRITE(slave) \
+ (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define I2C_READ(slave) \
+ (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0))
#define I2C_STOP_EN BIT(3)
+enum mb1_h {
+ MB1H_ARM_OPP = 1,
+ MB1H_APE_OPP,
+ MB1H_ARM_APE_OPP,
+};
+
+static struct {
+ struct mutex lock;
+ struct completion work;
+ struct {
+ u8 arm_opp;
+ u8 ape_opp;
+ u8 arm_status;
+ u8 ape_status;
+ } ack;
+} mb1_transfer;
+
enum ack_mb5_status {
I2C_WR_OK = 0x01,
I2C_RD_OK = 0x02,
@@ -145,6 +187,104 @@
}
EXPORT_SYMBOL(prcmu_abb_write);
+static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp,
+ enum prcmu_cpu_opp cpu_opp)
+{
+ bool do_ape;
+ bool do_arm;
+ int err = 0;
+
+ do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP));
+ do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP));
+
+ mutex_lock(&mb1_transfer.lock);
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ cpu_relax();
+
+ writeb(0, MBOX_HEADER_REQ_MB0);
+ writeb(cpu_opp, REQ_MB1_ARMOPP);
+ writeb(ape_opp, REQ_MB1_APEOPP);
+ writeb(0, REQ_MB1_BOOSTOPP);
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
+ wait_for_completion(&mb1_transfer.work);
+ if ((do_ape) && (mb1_transfer.ack.ape_status != 0))
+ err = -EIO;
+ if ((do_arm) && (mb1_transfer.ack.arm_status != 0))
+ err = -EIO;
+
+ mutex_unlock(&mb1_transfer.lock);
+
+ return err;
+}
+
+/**
+ * prcmu_set_ape_opp() - Set the OPP of the APE.
+ * @opp: The OPP to set.
+ *
+ * This function sets the OPP of the APE.
+ */
+int prcmu_set_ape_opp(enum prcmu_ape_opp opp)
+{
+ return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE);
+}
+EXPORT_SYMBOL(prcmu_set_ape_opp);
+
+/**
+ * prcmu_set_cpu_opp() - Set the OPP of the CPU.
+ * @opp: The OPP to set.
+ *
+ * This function sets the OPP of the CPU.
+ */
+int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp)
+{
+ return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp);
+}
+EXPORT_SYMBOL(prcmu_set_cpu_opp);
+
+/**
+ * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU.
+ * @ape_opp: The APE OPP to set.
+ * @cpu_opp: The CPU OPP to set.
+ *
+ * This function sets the OPPs of the APE and the CPU.
+ */
+int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
+ enum prcmu_cpu_opp cpu_opp)
+{
+ return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp);
+}
+EXPORT_SYMBOL(prcmu_set_ape_cpu_opps);
+
+/**
+ * prcmu_get_ape_opp() - Get the OPP of the APE.
+ *
+ * This function gets the OPP of the APE.
+ */
+enum prcmu_ape_opp prcmu_get_ape_opp(void)
+{
+ return readb(ACK_MB1_CURR_APEOPP);
+}
+EXPORT_SYMBOL(prcmu_get_ape_opp);
+
+/**
+ * prcmu_get_cpu_opp() - Get the OPP of the CPU.
+ *
+ * This function gets the OPP of the CPU. The OPP is specified in %%.
+ * PRCMU_OPP_EXT is a special OPP value, not specified in %%.
+ */
+int prcmu_get_cpu_opp(void)
+{
+ return readb(ACK_MB1_CURR_ARMOPP);
+}
+EXPORT_SYMBOL(prcmu_get_cpu_opp);
+
+bool prcmu_has_arm_maxopp(void)
+{
+ return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK)
+ == PRCM_AVS_ISMODEENABLE_MASK;
+}
+
static void read_mailbox_0(void)
{
writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
@@ -152,6 +292,9 @@
static void read_mailbox_1(void)
{
+ mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP);
+ mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP);
+ complete(&mb1_transfer.work);
writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
}
@@ -217,15 +360,35 @@
return IRQ_HANDLED;
}
+void __init prcmu_early_init(void)
+{
+ if (cpu_is_u8500v11() || cpu_is_u8500ed()) {
+ tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
+ } else if (cpu_is_u8500v2()) {
+ tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
+ } else {
+ pr_err("prcmu: Unsupported chip version\n");
+ BUG();
+ }
+}
+
static int __init prcmu_init(void)
{
+ if (cpu_is_u8500ed()) {
+ pr_err("prcmu: Unsupported chip version\n");
+ return 0;
+ }
+
+ mutex_init(&mb1_transfer.lock);
+ init_completion(&mb1_transfer.work);
mutex_init(&mb5_transfer.lock);
init_completion(&mb5_transfer.work);
/* Clean up the mailbox interrupts after pre-kernel code. */
writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
- return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL);
+ return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0,
+ "prcmu", NULL);
}
arch_initcall(prcmu_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 8493ed0..49db8b3 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -382,6 +382,12 @@
for which the CPU ID is equal to the ARM926 ID.
Relevant for Feroceon-1850 and early Feroceon-2850.
+# Marvell PJ4
+config CPU_PJ4
+ bool
+ select CPU_V7
+ select ARM_THUMBEE
+
# ARMv6
config CPU_V6
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
@@ -824,7 +830,7 @@
config CACHE_TAUROS2
bool "Enable the Tauros2 L2 cache controller"
- depends on (ARCH_DOVE || ARCH_MMP)
+ depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
default y
select OUTER_CACHE
help
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 64e3a64..389f217 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -21,10 +21,6 @@
config ARCH_MX25
bool "MX25-based"
- select CPU_ARM926T
- select ARCH_MXC_IOMUX_V3
- select HAVE_FB_IMX
- select ARCH_MXC_AUDMUX_V2
help
This enables support for systems based on the Freescale i.MX25 family
@@ -51,7 +47,6 @@
source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
-source "arch/arm/mach-mx25/Kconfig"
source "arch/arm/mach-mxc91231/Kconfig"
source "arch/arm/mach-mx5/Kconfig"
@@ -68,12 +63,10 @@
Say N here, unless you have a specialized requirement.
config MXC_TZIC
- bool "Enable TrustZone Interrupt Controller"
- depends on ARCH_MX51
- help
- This will be automatically selected for all processors
- containing this interrupt controller.
- Say N here only if you are really sure.
+ bool
+
+config MXC_AVIC
+ bool
config MXC_PWM
tristate "Enable PWM driver"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 3726709..5fd20e9 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,10 +3,11 @@
#
# Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
+obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o
-# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
+# MX51 uses the TZIC interrupt controller, older platforms use AVIC
obj-$(CONFIG_MXC_TZIC) += tzic.o
+obj-$(CONFIG_MXC_AVIC) += avic.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 0be1ac7..175e364 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -209,7 +209,7 @@
audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
}
#endif
-#if defined(CONFIG_ARCH_MX25)
+#if defined(CONFIG_SOC_IMX25)
if (cpu_is_mx25()) {
audmux_clk = clk_get(NULL, "audmux");
if (IS_ERR(audmux_clk)) {
@@ -220,7 +220,7 @@
}
audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
}
-#endif
+#endif /* if defined(CONFIG_SOC_IMX25) */
audmux_debugfs_init();
return 0;
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/avic.c
similarity index 89%
rename from arch/arm/plat-mxc/irq.c
rename to arch/arm/plat-mxc/avic.c
index 7331f2a..9a4e8a2 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -24,6 +24,8 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include "irq-common.h"
+
#define AVIC_INTCNTL 0x00 /* int control reg */
#define AVIC_NIMASK 0x04 /* int mask reg */
#define AVIC_INTENNUM 0x08 /* int enable number reg */
@@ -46,9 +48,9 @@
void __iomem *avic_base;
-int imx_irq_set_priority(unsigned char irq, unsigned char prio)
-{
#ifdef CONFIG_MXC_IRQ_PRIOR
+static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
+{
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
@@ -62,14 +64,11 @@
__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
return 0;
-#else
- return -ENOSYS;
-#endif
}
-EXPORT_SYMBOL(imx_irq_set_priority);
+#endif
#ifdef CONFIG_FIQ
-int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
+static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
{
unsigned int irqt;
@@ -87,7 +86,6 @@
return 0;
}
-EXPORT_SYMBOL(mxc_set_irq_fiq);
#endif /* CONFIG_FIQ */
/* Disable interrupt number "irq" in the AVIC */
@@ -102,10 +100,18 @@
__raw_writel(irq, avic_base + AVIC_INTENNUM);
}
-static struct irq_chip mxc_avic_chip = {
- .ack = mxc_mask_irq,
- .mask = mxc_mask_irq,
- .unmask = mxc_unmask_irq,
+static struct mxc_irq_chip mxc_avic_chip = {
+ .base = {
+ .ack = mxc_mask_irq,
+ .mask = mxc_mask_irq,
+ .unmask = mxc_unmask_irq,
+ },
+#ifdef CONFIG_MXC_IRQ_PRIOR
+ .set_priority = avic_irq_set_priority,
+#endif
+#ifdef CONFIG_FIQ
+ .set_irq_fiq = avic_set_irq_fiq,
+#endif
};
/*
@@ -133,7 +139,7 @@
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
- set_irq_chip(i, &mxc_avic_chip);
+ set_irq_chip(i, &mxc_avic_chip.base);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 039538e..ce81481 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -144,7 +144,6 @@
imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
policy->cur = clk_get_rate(cpu_clk) / 1000;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index 735776d..e9bcefe 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -17,6 +17,7 @@
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -36,9 +37,10 @@
return ret;
}
-struct platform_device *__init imx_add_platform_device(const char *name, int id,
+struct platform_device *__init imx_add_platform_device_dmamask(
+ const char *name, int id,
const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data)
+ const void *data, size_t size_data, u64 dmamask)
{
int ret = -ENOMEM;
struct platform_device *pdev;
@@ -47,6 +49,23 @@
if (!pdev)
goto err;
+ if (dmamask) {
+ /*
+ * This memory isn't freed when the device is put,
+ * I don't have a nice idea for that though. Conceptually
+ * dma_mask in struct device should not be a pointer.
+ * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
+ */
+ pdev->dev.dma_mask =
+ kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+ if (!pdev->dev.dma_mask)
+ /* ret is still -ENOMEM; */
+ goto err;
+
+ *pdev->dev.dma_mask = dmamask;
+ pdev->dev.coherent_dma_mask = dmamask;
+ }
+
if (res) {
ret = platform_device_add_resources(pdev, res, num_resources);
if (ret)
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 9aa6f3e..2537166 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -1,29 +1,73 @@
-config IMX_HAVE_PLATFORM_ESDHC
- bool
-
config IMX_HAVE_PLATFORM_FEC
bool
- default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51
+ default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51
config IMX_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
bool
+config IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ bool
+
config IMX_HAVE_PLATFORM_GPIO_KEYS
bool
- default y if ARCH_MX51
+ default y if SOC_IMX51
+
+config IMX_HAVE_PLATFORM_IMX21_HCD
+ bool
+config IMX_HAVE_PLATFORM_IMX2_WDT
+ bool
+
+config IMX_HAVE_PLATFORM_IMXDI_RTC
+ bool
+
+config IMX_HAVE_PLATFORM_IMX_FB
+ bool
+ select HAVE_FB_IMX
+
config IMX_HAVE_PLATFORM_IMX_I2C
bool
+config IMX_HAVE_PLATFORM_IMX_KEYPAD
+ bool
+
config IMX_HAVE_PLATFORM_IMX_SSI
bool
config IMX_HAVE_PLATFORM_IMX_UART
bool
+config IMX_HAVE_PLATFORM_IMX_UDC
+ bool
+
+config IMX_HAVE_PLATFORM_MX1_CAMERA
+ bool
+
+config IMX_HAVE_PLATFORM_MX2_CAMERA
+ bool
+
+config IMX_HAVE_PLATFORM_MXC_EHCI
+ bool
+
+config IMX_HAVE_PLATFORM_MXC_MMC
+ bool
+
config IMX_HAVE_PLATFORM_MXC_NAND
bool
+config IMX_HAVE_PLATFORM_MXC_PWM
+ bool
+
+config IMX_HAVE_PLATFORM_MXC_RNGA
+ bool
+ select ARCH_HAS_RNGA
+
+config IMX_HAVE_PLATFORM_MXC_W1
+ bool
+
+config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ bool
+
config IMX_HAVE_PLATFORM_SPI_IMX
bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 45aefeb..75cd2ec 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -1,10 +1,24 @@
-obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
obj-y += platform-imx-dma.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c
deleted file mode 100644
index 2605bfa..0000000
--- a/arch/arm/plat-mxc/devices/platform-esdhc.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#include <mach/esdhc.h>
-
-#define imx_esdhc_imx_data_entry_single(soc, _id, hwid) \
- { \
- .id = _id, \
- .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \
- .irq = soc ## _INT_ESDHC ## hwid, \
- }
-
-#define imx_esdhc_imx_data_entry(soc, id, hwid) \
- [id] = imx_esdhc_imx_data_entry_single(soc, id, hwid)
-
-#ifdef CONFIG_ARCH_MX25
-const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst = {
-#define imx25_esdhc_data_entry(_id, _hwid) \
- imx_esdhc_imx_data_entry(MX25, _id, _hwid)
- imx25_esdhc_data_entry(0, 1),
- imx25_esdhc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_ARCH_MX25 */
-
-#ifdef CONFIG_ARCH_MX35
-const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst = {
-#define imx35_esdhc_data_entry(_id, _hwid) \
- imx_esdhc_imx_data_entry(MX35, _id, _hwid)
- imx35_esdhc_data_entry(0, 1),
- imx35_esdhc_data_entry(1, 2),
- imx35_esdhc_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_ARCH_MX35 */
-
-#ifdef CONFIG_ARCH_MX51
-const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst = {
-#define imx51_esdhc_data_entry(_id, _hwid) \
- imx_esdhc_imx_data_entry(MX51, _id, _hwid)
- imx51_esdhc_data_entry(0, 1),
- imx51_esdhc_data_entry(1, 2),
- imx51_esdhc_data_entry(2, 3),
- imx51_esdhc_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_ARCH_MX51 */
-
-struct platform_device *__init imx_add_esdhc(
- const struct imx_esdhc_imx_data *data,
- const struct esdhc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("sdhci-esdhc-imx", data->id, res,
- ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index 11d087f..269ec78 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -16,22 +16,22 @@
.irq = soc ## _INT_FEC, \
}
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
const struct imx_fec_data imx25_fec_data __initconst =
imx_fec_data_entry_single(MX25);
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
imx_fec_data_entry_single(MX27);
#endif /* ifdef CONFIG_SOC_IMX27 */
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
const struct imx_fec_data imx35_fec_data __initconst =
imx_fec_data_entry_single(MX35);
#endif
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
const struct imx_fec_data imx51_fec_data __initconst =
imx_fec_data_entry_single(MX51);
#endif
diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c
index 5e97a01..4e8497a 100644
--- a/arch/arm/plat-mxc/devices/platform-flexcan.c
+++ b/arch/arm/plat-mxc/devices/platform-flexcan.c
@@ -5,26 +5,54 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-
+#include <mach/hardware.h>
#include <mach/devices-common.h>
-struct platform_device *__init imx_add_flexcan(int id,
- resource_size_t iobase, resource_size_t iosize,
- resource_size_t irq,
+#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_CAN ## _hwid, \
+ }
+
+#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \
+ [_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_flexcan_data imx25_flexcan_data[] __initconst = {
+#define imx25_flexcan_data_entry(_id, _hwid) \
+ imx_flexcan_data_entry(MX25, _id, _hwid, SZ_16K)
+ imx25_flexcan_data_entry(0, 1),
+ imx25_flexcan_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
+#define imx35_flexcan_data_entry(_id, _hwid) \
+ imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
+ imx35_flexcan_data_entry(0, 1),
+ imx35_flexcan_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_flexcan(
+ const struct imx_flexcan_data *data,
const struct flexcan_platform_data *pdata)
{
struct resource res[] = {
{
- .start = iobase,
- .end = iobase + iosize - 1,
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = irq,
- .end = irq,
+ .start = data->irq,
+ .end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device("flexcan", id, res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
+ return imx_add_platform_device("flexcan", data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
new file mode 100644
index 0000000..59c33f6
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_fsl_usb2_udc_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _USB_OTG_BASE_ADDR, \
+ .irq = soc ## _INT_USB_OTG, \
+ }
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
+ imx_fsl_usb2_udc_data_entry_single(MX25);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
+ imx_fsl_usb2_udc_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
+ imx_fsl_usb2_udc_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
+ imx_fsl_usb2_udc_data_entry_single(MX35);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_fsl_usb2_udc(
+ const struct imx_fsl_usb2_udc_data *data,
+ const struct fsl_usb2_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 3a705c7..33530d2 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -31,25 +31,25 @@
}, \
}
-#ifdef CONFIG_ARCH_MX25
-const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
+#ifdef CONFIG_SOC_IMX25
+struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_ARCH_MX51
-const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
+#ifdef CONFIG_SOC_IMX51
+struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
const struct imx_imx_sdma_data *data)
@@ -76,6 +76,83 @@
return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0);
}
+#ifdef CONFIG_ARCH_MX25
+static struct sdma_script_start_addrs addr_imx25_to1 = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1255,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1120,
+ .per_2_shp_addr = 1329,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1560,
+ .mcu_2_ata_addr = 1479,
+ .app_2_per_addr = 1189,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1407,
+ .shp_2_mcu_addr = 979,
+};
+#endif
+
+#ifdef CONFIG_ARCH_MX31
+static struct sdma_script_start_addrs addr_imx31_to1 = {
+ .per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs addr_imx31_to2 = {
+ .ap_2_ap_addr = 423,
+ .ap_2_bp_addr = 829,
+ .bp_2_ap_addr = 1029,
+};
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+static struct sdma_script_start_addrs addr_imx35_to1 = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .uartsh_2_mcu_addr = 1183,
+ .per_2_shp_addr = 1033,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1333,
+ .mcu_2_ata_addr = 1252,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1111,
+ .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs addr_imx35_to2 = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1597,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1270,
+ .per_2_shp_addr = 1120,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1429,
+ .mcu_2_ata_addr = 1339,
+ .app_2_per_addr = 1531,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1198,
+ .shp_2_mcu_addr = 979,
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX51
+static struct sdma_script_start_addrs addr_imx51_to1 = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1473,
+ .mcu_2_ata_addr = 1392,
+ .app_2_per_addr = 1033,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1251,
+ .shp_2_mcu_addr = 892,
+};
+#endif
+
static int __init imxXX_add_imx_dma(void)
{
struct platform_device *ret;
@@ -86,30 +163,42 @@
else
#endif
-#if defined(CONFIG_ARCH_MX25)
- if (cpu_is_mx25())
+#if defined(CONFIG_SOC_IMX25)
+ if (cpu_is_mx25()) {
+ imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1;
ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
- else
+ } else
#endif
-#if defined(CONFIG_ARCH_MX31)
+#if defined(CONFIG_SOC_IMX31)
if (cpu_is_mx31()) {
- imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4;
+ int to_version = mx31_revision() >> 4;
+ imx31_imx_sdma_data.pdata.to_version = to_version;
+ if (to_version == 1)
+ imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to1;
+ else
+ imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to2;
ret = imx_add_imx_sdma(&imx31_imx_sdma_data);
} else
#endif
-#if defined(CONFIG_ARCH_MX35)
+#if defined(CONFIG_SOC_IMX35)
if (cpu_is_mx35()) {
- imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4;
+ int to_version = mx35_revision() >> 4;
+ imx35_imx_sdma_data.pdata.to_version = to_version;
+ if (to_version == 1)
+ imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to1;
+ else
+ imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to2;
ret = imx_add_imx_sdma(&imx35_imx_sdma_data);
} else
#endif
#if defined(CONFIG_ARCH_MX51)
- if (cpu_is_mx51())
+ if (cpu_is_mx51()) {
+ imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
- else
+ } else
#endif
ret = ERR_PTR(-ENODEV);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c
new file mode 100644
index 0000000..6100a7d
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_fb_data_entry_single(soc, _size) \
+ { \
+ .iobase = soc ## _LCDC_BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_LCDC, \
+ }
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
+ imx_imx_fb_data_entry_single(MX21, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
+ imx_imx_fb_data_entry_single(MX25, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
+ imx_imx_fb_data_entry_single(MX27, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_imx_fb(
+ const struct imx_imx_fb_data *data,
+ const struct imx_fb_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device_dmamask("imx-fb", 0,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
index 6795884..72ba880 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -30,7 +30,7 @@
imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
#define imx25_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
@@ -38,7 +38,7 @@
imx25_imx_i2c_data_entry(1, 2),
imx25_imx_i2c_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
@@ -49,7 +49,7 @@
};
#endif /* ifdef CONFIG_SOC_IMX27 */
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
#define imx31_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
@@ -57,9 +57,9 @@
imx31_imx_i2c_data_entry(1, 2),
imx31_imx_i2c_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
#define imx35_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
@@ -67,16 +67,16 @@
imx35_imx_i2c_data_entry(1, 2),
imx35_imx_i2c_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
#define imx51_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
imx51_imx_i2c_data_entry(0, 1),
imx51_imx_i2c_data_entry(1, 2),
};
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/plat-mxc/devices/platform-imx-keypad.c
new file mode 100644
index 0000000..40238f0
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-keypad.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_keypad_data_entry_single(soc, _size) \
+ { \
+ .iobase = soc ## _KPP_BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_KPP, \
+ }
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX21, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX25, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX27, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX31, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX35, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_imx_keypad(
+ const struct imx_imx_keypad_data *data,
+ const struct matrix_keymap_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("imx-keypad", -1,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
index 38a7a0b..2569c8d 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
@@ -30,14 +30,14 @@
};
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
#define imx25_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
imx25_imx_ssi_data_entry(0, 1),
imx25_imx_ssi_data_entry(1, 2),
};
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
@@ -48,32 +48,33 @@
};
#endif /* ifdef CONFIG_SOC_IMX27 */
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
#define imx31_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
imx31_imx_ssi_data_entry(0, 1),
imx31_imx_ssi_data_entry(1, 2),
};
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
#define imx35_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
imx35_imx_ssi_data_entry(0, 1),
imx35_imx_ssi_data_entry(1, 2),
};
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
#define imx51_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
imx51_imx_ssi_data_entry(0, 1),
imx51_imx_ssi_data_entry(1, 2),
+ imx51_imx_ssi_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index 2039640..3c854c2 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -47,7 +47,7 @@
};
#endif
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
#define imx25_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
@@ -57,7 +57,7 @@
imx25_imx_uart_data_entry(3, 4),
imx25_imx_uart_data_entry(4, 5),
};
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
@@ -72,7 +72,7 @@
};
#endif /* ifdef CONFIG_SOC_IMX27 */
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
#define imx31_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
@@ -82,9 +82,9 @@
imx31_imx_uart_data_entry(3, 4),
imx31_imx_uart_data_entry(4, 5),
};
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
#define imx35_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
@@ -92,9 +92,21 @@
imx35_imx_uart_data_entry(1, 2),
imx35_imx_uart_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX50
+const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = {
+#define imx50_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K)
+ imx50_imx_uart_data_entry(0, 1),
+ imx50_imx_uart_data_entry(1, 2),
+ imx50_imx_uart_data_entry(2, 3),
+ imx50_imx_uart_data_entry(3, 4),
+ imx50_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_SOC_IMX50 */
+
+#ifdef CONFIG_SOC_IMX51
const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
#define imx51_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
@@ -102,7 +114,17 @@
imx51_imx_uart_data_entry(1, 2),
imx51_imx_uart_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
+#define imx53_imx_uart_data_entry(_id, _hwid) \
+ imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K)
+ imx53_imx_uart_data_entry(0, 1),
+ imx53_imx_uart_data_entry(1, 2),
+ imx53_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
struct platform_device *__init imx_add_imx_uart_3irq(
const struct imx_imx_uart_3irq_data *data,
diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
new file mode 100644
index 0000000..e0aec61
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ }
+#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \
+ [_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
+ imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
+ imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
+ imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
+ imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
+ imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = {
+#define imx51_imx2_wdt_data_entry(_id, _hwid) \
+ imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K)
+ imx51_imx2_wdt_data_entry(0, 1),
+ imx51_imx2_wdt_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+struct platform_device *__init imx_add_imx2_wdt(
+ const struct imx_imx2_wdt_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ };
+ return imx_add_platform_device("imx2-wdt", data->id,
+ res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c b/arch/arm/plat-mxc/devices/platform-imx21-hcd.c
new file mode 100644
index 0000000..5770a42
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx21-hcd.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx21_hcd_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _USBOTG_BASE_ADDR, \
+ .irq = soc ## _INT_USBHOST, \
+ }
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
+ imx_imx21_hcd_data_entry_single(MX21);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+struct platform_device *__init imx_add_imx21_hcd(
+ const struct imx_imx21_hcd_data *data,
+ const struct mx21_usbh_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device_dmamask("imx21-hcd", 0,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx_udc.c b/arch/arm/plat-mxc/devices/platform-imx_udc.c
new file mode 100644
index 0000000..6fd675d
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx_udc.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_udc_data_entry_single(soc, _size) \
+ { \
+ .iobase = soc ## _USBD_BASE_ADDR, \
+ .iosize = _size, \
+ .irq0 = soc ## _INT_USBD0, \
+ .irq1 = soc ## _INT_USBD1, \
+ .irq2 = soc ## _INT_USBD2, \
+ .irq3 = soc ## _INT_USBD3, \
+ .irq4 = soc ## _INT_USBD4, \
+ .irq5 = soc ## _INT_USBD5, \
+ .irq6 = soc ## _INT_USBD6, \
+ }
+
+#define imx_imx_udc_data_entry(soc, _size) \
+ [_id] = imx_imx_udc_data_entry_single(soc, _size)
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_udc_data imx1_imx_udc_data __initconst =
+ imx_imx_udc_data_entry_single(MX1, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+struct platform_device *__init imx_add_imx_udc(
+ const struct imx_imx_udc_data *data,
+ const struct imxusb_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq0,
+ .end = data->irq0,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq1,
+ .end = data->irq1,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq2,
+ .end = data->irq2,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq3,
+ .end = data->irq3,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq4,
+ .end = data->irq4,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq5,
+ .end = data->irq5,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq6,
+ .end = data->irq6,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("imx_udc", 0,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
new file mode 100644
index 0000000..10653cc
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imxdi_rtc_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _DRYICE_BASE_ADDR, \
+ .irq = soc ## _INT_DRYICE, \
+ }
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
+ imx_imxdi_rtc_data_entry_single(MX25);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+struct platform_device *__init imx_add_imxdi_rtc(
+ const struct imx_imxdi_rtc_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_16K,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("imxdi_rtc", 0,
+ res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mx1-camera.c b/arch/arm/plat-mxc/devices/platform-mx1-camera.c
new file mode 100644
index 0000000..edcc581
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mx1-camera.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mx1_camera_data_entry_single(soc, _size) \
+ { \
+ .iobase = soc ## _CSI ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_CSI, \
+ }
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
+ imx_mx1_camera_data_entry_single(MX1, 10);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+struct platform_device *__init imx_add_mx1_camera(
+ const struct imx_mx1_camera_data *data,
+ const struct mx1_camera_pdata *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device_dmamask("mx1-camera", 0,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/plat-mxc/devices/platform-mx2-camera.c
new file mode 100644
index 0000000..b3f4828
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mx2-camera.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mx2_camera_data_entry_single(soc) \
+ { \
+ .iobasecsi = soc ## _CSI_BASE_ADDR, \
+ .iosizecsi = SZ_4K, \
+ .irqcsi = soc ## _INT_CSI, \
+ }
+#define imx_mx2_camera_data_entry_single_emma(soc) \
+ { \
+ .iobasecsi = soc ## _CSI_BASE_ADDR, \
+ .iosizecsi = SZ_32, \
+ .irqcsi = soc ## _INT_CSI, \
+ .iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \
+ .iosizeemmaprp = SZ_32, \
+ .irqemmaprp = soc ## _INT_EMMAPRP, \
+ }
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
+ imx_mx2_camera_data_entry_single(MX25);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
+ imx_mx2_camera_data_entry_single_emma(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_mx2_camera(
+ const struct imx_mx2_camera_data *data,
+ const struct mx2_camera_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobasecsi,
+ .end = data->iobasecsi + data->iosizecsi - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irqcsi,
+ .end = data->irqcsi,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->iobaseemmaprp,
+ .end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irqemmaprp,
+ .end = data->irqemmaprp,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device_dmamask("mx2-camera", 0,
+ res, data->iobaseemmaprp ? 4 : 2,
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
new file mode 100644
index 0000000..cc488f4
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \
+ .irq = soc ## _INT_USB_ ## hs, \
+ }
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
+const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX25, 1, HS);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
+const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
+ imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
+ imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
+const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
+ imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
+ imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
+const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX35, 1, HS);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_mxc_ehci(
+ const struct imx_mxc_ehci_data *data,
+ const struct mxc_usbh_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device_dmamask("mxc-ehci", data->id,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
new file mode 100644
index 0000000..90d762f
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_SDHC ## _hwid, \
+ .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \
+ }
+#define imx_mxc_mmc_data_entry(soc, _id, _hwid, _size) \
+ [_id] = imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
+#define imx21_mxc_mmc_data_entry(_id, _hwid) \
+ imx_mxc_mmc_data_entry(MX21, _id, _hwid, SZ_4K)
+ imx21_mxc_mmc_data_entry(0, 1),
+ imx21_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
+#define imx27_mxc_mmc_data_entry(_id, _hwid) \
+ imx_mxc_mmc_data_entry(MX27, _id, _hwid, SZ_4K)
+ imx27_mxc_mmc_data_entry(0, 1),
+ imx27_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
+#define imx31_mxc_mmc_data_entry(_id, _hwid) \
+ imx_mxc_mmc_data_entry(MX31, _id, _hwid, SZ_16K)
+ imx31_mxc_mmc_data_entry(0, 1),
+ imx31_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+struct platform_device *__init imx_add_mxc_mmc(
+ const struct imx_mxc_mmc_data *data,
+ const struct imxmmc_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->dmareq,
+ .end = data->dmareq,
+ .flags = IORESOURCE_DMA,
+ },
+ };
+ return imx_add_platform_device_dmamask("mxc-mmc", data->id,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
index 3fdcc32..1568f39 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -31,27 +31,27 @@
imx_mxc_nand_data_entry_single(MX21, SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX25, SZ_8K);
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX27, SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX31, SZ_4K);
#endif
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX35, SZ_8K);
#endif
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
imx_mxc_nandv3_data_entry_single(MX51, SZ_16K);
#endif
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c b/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
new file mode 100644
index 0000000..3d8ebdb
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _PWM ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_PWM ## _hwid, \
+ }
+#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size) \
+ [_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst =
+ imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = {
+#define imx25_mxc_pwm_data_entry(_id, _hwid) \
+ imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K)
+ imx25_mxc_pwm_data_entry(0, 1),
+ imx25_mxc_pwm_data_entry(1, 2),
+ imx25_mxc_pwm_data_entry(2, 3),
+ imx25_mxc_pwm_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst =
+ imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_mxc_pwm(
+ const struct imx_mxc_pwm_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("mxc_pwm", data->id,
+ res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c b/arch/arm/plat-mxc/devices/platform-mxc_rnga.c
new file mode 100644
index 0000000..b4b7612
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_rnga.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+struct imx_mxc_rnga_data {
+ resource_size_t iobase;
+};
+
+#define imx_mxc_rnga_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _RNGA_BASE_ADDR, \
+ }
+
+#ifdef CONFIG_SOC_IMX31
+static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst =
+ imx_mxc_rnga_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+static struct platform_device *__init imx_add_mxc_rnga(
+ const struct imx_mxc_rnga_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ };
+ return imx_add_platform_device("mxc_rnga", -1,
+ res, ARRAY_SIZE(res), NULL, 0);
+}
+
+static int __init imxXX_add_mxc_rnga(void)
+{
+ struct platform_device *ret;
+
+#if defined(CONFIG_SOC_IMX31)
+ if (cpu_is_mx31())
+ ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data);
+ else
+#endif /* if defined(CONFIG_SOC_IMX31) */
+ ret = ERR_PTR(-ENODEV);
+
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+
+ return 0;
+}
+arch_initcall(imxXX_add_mxc_rnga);
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_w1.c b/arch/arm/plat-mxc/devices/platform-mxc_w1.c
new file mode 100644
index 0000000..96fa5ea
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_w1.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_w1_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _OWIRE_BASE_ADDR, \
+ }
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
+ imx_mxc_w1_data_entry_single(MX21);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
+ imx_mxc_w1_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
+ imx_mxc_w1_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
+ imx_mxc_w1_data_entry_single(MX35);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_mxc_w1(
+ const struct imx_mxc_w1_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ };
+
+ return imx_add_platform_device("mxc_w1", 0,
+ res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
new file mode 100644
index 0000000..b352564
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#include <mach/esdhc.h>
+
+#define imx_sdhci_esdhc_imx_data_entry_single(soc, _id, hwid) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \
+ .irq = soc ## _INT_ESDHC ## hwid, \
+ }
+
+#define imx_sdhci_esdhc_imx_data_entry(soc, id, hwid) \
+ [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, id, hwid)
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_sdhci_esdhc_imx_data
+imx25_sdhci_esdhc_imx_data[] __initconst = {
+#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid) \
+ imx_sdhci_esdhc_imx_data_entry(MX25, _id, _hwid)
+ imx25_sdhci_esdhc_imx_data_entry(0, 1),
+ imx25_sdhci_esdhc_imx_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_sdhci_esdhc_imx_data
+imx35_sdhci_esdhc_imx_data[] __initconst = {
+#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \
+ imx_sdhci_esdhc_imx_data_entry(MX35, _id, _hwid)
+ imx35_sdhci_esdhc_imx_data_entry(0, 1),
+ imx35_sdhci_esdhc_imx_data_entry(1, 2),
+ imx35_sdhci_esdhc_imx_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_sdhci_esdhc_imx_data
+imx51_sdhci_esdhc_imx_data[] __initconst = {
+#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid) \
+ imx_sdhci_esdhc_imx_data_entry(MX51, _id, _hwid)
+ imx51_sdhci_esdhc_imx_data_entry(0, 1),
+ imx51_sdhci_esdhc_imx_data_entry(1, 2),
+ imx51_sdhci_esdhc_imx_data_entry(2, 3),
+ imx51_sdhci_esdhc_imx_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+struct platform_device *__init imx_add_sdhci_esdhc_imx(
+ const struct imx_sdhci_esdhc_imx_data *data,
+ const struct esdhc_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("sdhci-esdhc-imx", data->id, res,
+ ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index 17f724c..8ea49ad 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -30,7 +30,7 @@
};
#endif
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
#define imx25_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K)
@@ -38,7 +38,7 @@
imx25_cspi_data_entry(1, 2),
imx25_cspi_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
@@ -50,7 +50,7 @@
};
#endif /* ifdef CONFIG_SOC_IMX27 */
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
#define imx31_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
@@ -58,18 +58,18 @@
imx31_cspi_data_entry(1, 2),
imx31_cspi_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
#define imx35_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
imx35_cspi_data_entry(0, 1),
imx35_cspi_data_entry(1, 2),
};
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
const struct imx_spi_imx_data imx51_cspi_data __initconst =
imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K);
@@ -79,7 +79,7 @@
imx51_ecspi_data_entry(0, 1),
imx51_ecspi_data_entry(1, 2),
};
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 9915607..8772ce3 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -49,6 +49,7 @@
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
+#define MXC_H2_OFFSET 0x400
/* USB_CTRL */
#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */
@@ -61,6 +62,11 @@
#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
+/* USBH2CTRL */
+#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
+#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
+#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
+
#define MXC_USBCMD_OFFSET 0x140
/* USBCMD */
@@ -69,9 +75,9 @@
int mxc_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
-#if defined(CONFIG_ARCH_MX25)
+#if defined(CONFIG_SOC_IMX25)
if (cpu_is_mx25()) {
- v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+ v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
@@ -108,14 +114,14 @@
return -EINVAL;
}
- writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+ writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
-#endif /* CONFIG_ARCH_MX25 */
+#endif /* if defined(CONFIG_SOC_IMX25) */
#if defined(CONFIG_ARCH_MX3)
if (cpu_is_mx31()) {
- v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
+ v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
@@ -153,13 +159,13 @@
return -EINVAL;
}
- writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
+ writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
if (cpu_is_mx35()) {
- v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+ v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
@@ -196,7 +202,7 @@
return -EINVAL;
}
- writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+ writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
@@ -206,7 +212,7 @@
/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
* are identical
*/
- v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+ v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
@@ -241,12 +247,12 @@
default:
return -EINVAL;
}
- writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+ writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
#endif /* CONFIG_MACH_MX27 */
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
if (cpu_is_mx51()) {
void __iomem *usb_base;
void __iomem *usbotg_base;
@@ -254,6 +260,10 @@
int ret = 0;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base) {
+ printk(KERN_ERR "%s(): ioremap failed\n", __func__);
+ return -ENOMEM;
+ }
switch (port) {
case 0: /* OTG port */
@@ -262,6 +272,9 @@
case 1: /* Host 1 port */
usbotg_base = usb_base + MXC_H1_OFFSET;
break;
+ case 2: /* Host 2 port */
+ usbotg_base = usb_base + MXC_H2_OFFSET;
+ break;
default:
printk(KERN_ERR"%s no such port %d\n", __func__, port);
ret = -ENOENT;
@@ -274,10 +287,13 @@
if (flags & MXC_EHCI_INTERNAL_PHY) {
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */
- else
- v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */
+ if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
+ /* OC/USBPWR is not used */
+ v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+ } else {
+ /* OC/USBPWR is used */
+ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+ }
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
@@ -285,16 +301,23 @@
v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
else
v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
+ if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ v |= MXC_OTG_UCTRL_OPM_BIT;
+ else
+ v &= ~MXC_OTG_UCTRL_OPM_BIT;
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
}
break;
case 1: /* Host 1 */
/*Host ULPI */
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED)
- v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
- else
- v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
+ if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+ /* HOST1 wakeup/ULPI intr enable */
+ v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+ } else {
+ /* HOST1 wakeup/ULPI intr disable */
+ v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+ }
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
@@ -315,6 +338,22 @@
v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
break;
+ case 2: /* Host 2 ULPI */
+ v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+ if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+ /* HOST1 wakeup/ULPI intr enable */
+ v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+ } else {
+ /* HOST1 wakeup/ULPI intr disable */
+ v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+ }
+
+ if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+ else
+ v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+ __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
+ break;
}
error:
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 9c3e362..bc2c7bc 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -175,7 +175,7 @@
static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
u32 irq_stat;
- struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+ struct mxc_gpio_port *port = get_irq_data(irq);
irq_stat = __raw_readl(port->base + GPIO_ISR) &
__raw_readl(port->base + GPIO_IMR);
@@ -188,7 +188,7 @@
{
int i;
u32 irq_msk, irq_stat;
- struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+ struct mxc_gpio_port *port = get_irq_data(irq);
/* walk through all interrupt status registers */
for (i = 0; i < gpio_table_size; i++) {
@@ -349,3 +349,113 @@
return 0;
}
+
+#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \
+ { \
+ .chip.label = "gpio-" #_id, \
+ .irq = _irq, \
+ .irq_high = _irq_high, \
+ .base = soc ## _IO_ADDRESS( \
+ soc ## _GPIO ## _hwid ## _BASE_ADDR), \
+ .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \
+ }
+
+#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \
+ DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
+#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \
+ DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
+
+#define DEFINE_REGISTER_FUNCTION(prefix) \
+int __init prefix ## _register_gpios(void) \
+{ \
+ return mxc_gpio_init(prefix ## _gpio_ports, \
+ ARRAY_SIZE(prefix ## _gpio_ports)); \
+}
+
+#if defined(CONFIG_SOC_IMX1)
+static struct mxc_gpio_port imx1_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
+};
+
+DEFINE_REGISTER_FUNCTION(imx1)
+
+#endif /* if defined(CONFIG_SOC_IMX1) */
+
+#if defined(CONFIG_SOC_IMX21)
+static struct mxc_gpio_port imx21_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
+ DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
+ DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
+ DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
+ DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
+ DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
+};
+
+DEFINE_REGISTER_FUNCTION(imx21)
+
+#endif /* if defined(CONFIG_SOC_IMX21) */
+
+#if defined(CONFIG_SOC_IMX25)
+static struct mxc_gpio_port imx25_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
+};
+
+DEFINE_REGISTER_FUNCTION(imx25)
+
+#endif /* if defined(CONFIG_SOC_IMX25) */
+
+#if defined(CONFIG_SOC_IMX27)
+static struct mxc_gpio_port imx27_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
+ DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
+ DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
+ DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
+ DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
+ DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
+};
+
+DEFINE_REGISTER_FUNCTION(imx27)
+
+#endif /* if defined(CONFIG_SOC_IMX27) */
+
+#if defined(CONFIG_SOC_IMX31)
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
+DEFINE_REGISTER_FUNCTION(imx31)
+
+#endif /* if defined(CONFIG_SOC_IMX31) */
+
+#if defined(CONFIG_SOC_IMX35)
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
+DEFINE_REGISTER_FUNCTION(imx35)
+
+#endif /* if defined(CONFIG_SOC_IMX35) */
+
+#if defined(CONFIG_SOC_IMX50)
+static struct mxc_gpio_port imx50_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
+ DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
+ DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+ DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+ DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+ DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+};
+
+DEFINE_REGISTER_FUNCTION(imx50)
+
+#endif /* if defined(CONFIG_SOC_IMX50) */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 7a1e1f8..aea2cd3 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,7 +20,9 @@
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
+extern void mx50_map_io(void);
extern void mx51_map_io(void);
+extern void mx53_map_io(void);
extern void mxc91231_map_io(void);
extern void mxc_init_irq(void __iomem *);
extern void tzic_init_irq(void __iomem *);
@@ -30,7 +32,9 @@
extern void mx27_init_irq(void);
extern void mx31_init_irq(void);
extern void mx35_init_irq(void);
+extern void mx50_init_irq(void);
extern void mx51_init_irq(void);
+extern void mx53_init_irq(void);
extern void mxc91231_init_irq(void);
extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
@@ -42,6 +46,8 @@
extern int mx35_clocks_init(void);
extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2);
extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
@@ -50,5 +56,6 @@
extern void mxc91231_power_off(void);
extern void mxc91231_arch_reset(int, const char *);
extern void mxc91231_prepare_idle(void);
-
+extern void mx51_efikamx_reset(void);
+extern int mx53_revision(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index d56213f..3b3a37c 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -10,58 +10,49 @@
* published by the Free Software Foundation.
*
*/
-#define IMX_NEEDS_DEPRECATED_SYMBOLS
+#include <mach/hardware.h>
#ifdef CONFIG_ARCH_MX1
-#include <mach/mx1.h>
-#define UART_PADDR UART1_BASE_ADDR
-#define UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR MX1_UART1_BASE_ADDR
#endif
#ifdef CONFIG_ARCH_MX25
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#include <mach/mx25.h>
#define UART_PADDR MX25_UART1_BASE_ADDR
-#define UART_VADDR MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR)
#endif
#ifdef CONFIG_ARCH_MX2
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#include <mach/mx2x.h>
-#define UART_PADDR UART1_BASE_ADDR
-#define UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR MX2x_UART1_BASE_ADDR
#endif
#ifdef CONFIG_ARCH_MX3
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#include <mach/mx3x.h>
-#define UART_PADDR UART1_BASE_ADDR
-#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR MX3x_UART1_BASE_ADDR
#endif
#ifdef CONFIG_ARCH_MX5
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#include <mach/mx51.h>
#define UART_PADDR MX51_UART1_BASE_ADDR
-#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
#endif
#ifdef CONFIG_ARCH_MXC91231
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#include <mach/mxc91231.h>
#define UART_PADDR MXC91231_UART2_BASE_ADDR
-#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
#endif
+
+#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
+
.macro addruart, rp, rv
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 8c6896f..8658c9c 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -10,9 +10,19 @@
#include <linux/platform_device.h>
#include <linux/init.h>
-struct platform_device *imx_add_platform_device(const char *name, int id,
+struct platform_device *imx_add_platform_device_dmamask(
+ const char *name, int id,
const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data);
+ const void *data, size_t size_data, u64 dmamask);
+
+static inline struct platform_device *imx_add_platform_device(
+ const char *name, int id,
+ const struct resource *res, unsigned int num_resources,
+ const void *data, size_t size_data)
+{
+ return imx_add_platform_device_dmamask(
+ name, id, res, num_resources, data, size_data, 0);
+}
#include <linux/fec.h>
struct imx_fec_data {
@@ -24,15 +34,63 @@
const struct fec_platform_data *pdata);
#include <linux/can/platform/flexcan.h>
-struct platform_device *__init imx_add_flexcan(int id,
- resource_size_t iobase, resource_size_t iosize,
- resource_size_t irq,
+struct imx_flexcan_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_flexcan(
+ const struct imx_flexcan_data *data,
const struct flexcan_platform_data *pdata);
+#include <linux/fsl_devices.h>
+struct imx_fsl_usb2_udc_data {
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_fsl_usb2_udc(
+ const struct imx_fsl_usb2_udc_data *data,
+ const struct fsl_usb2_platform_data *pdata);
+
#include <linux/gpio_keys.h>
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata);
+#include <mach/mx21-usbhost.h>
+struct imx_imx21_hcd_data {
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx21_hcd(
+ const struct imx_imx21_hcd_data *data,
+ const struct mx21_usbh_platform_data *pdata);
+
+struct imx_imx2_wdt_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+};
+struct platform_device *__init imx_add_imx2_wdt(
+ const struct imx_imx2_wdt_data *data);
+
+struct imx_imxdi_rtc_data {
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_imxdi_rtc(
+ const struct imx_imxdi_rtc_data *data);
+
+#include <mach/imxfb.h>
+struct imx_imx_fb_data {
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_fb(
+ const struct imx_imx_fb_data *data,
+ const struct imx_fb_platform_data *pdata);
+
#include <mach/i2c.h>
struct imx_imx_i2c_data {
int id;
@@ -44,6 +102,16 @@
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata);
+#include <linux/input/matrix_keypad.h>
+struct imx_imx_keypad_data {
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_keypad(
+ const struct imx_imx_keypad_data *data,
+ const struct matrix_keymap_data *pdata);
+
#include <mach/ssi.h>
struct imx_imx_ssi_data {
int id;
@@ -82,6 +150,67 @@
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
+#include <mach/usb.h>
+struct imx_imx_udc_data {
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq0;
+ resource_size_t irq1;
+ resource_size_t irq2;
+ resource_size_t irq3;
+ resource_size_t irq4;
+ resource_size_t irq5;
+ resource_size_t irq6;
+};
+struct platform_device *__init imx_add_imx_udc(
+ const struct imx_imx_udc_data *data,
+ const struct imxusb_platform_data *pdata);
+
+#include <mach/mx1_camera.h>
+struct imx_mx1_camera_data {
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_mx1_camera(
+ const struct imx_mx1_camera_data *data,
+ const struct mx1_camera_pdata *pdata);
+
+#include <mach/mx2_cam.h>
+struct imx_mx2_camera_data {
+ resource_size_t iobasecsi;
+ resource_size_t iosizecsi;
+ resource_size_t irqcsi;
+ resource_size_t iobaseemmaprp;
+ resource_size_t iosizeemmaprp;
+ resource_size_t irqemmaprp;
+};
+struct platform_device *__init imx_add_mx2_camera(
+ const struct imx_mx2_camera_data *data,
+ const struct mx2_camera_platform_data *pdata);
+
+#include <mach/mxc_ehci.h>
+struct imx_mxc_ehci_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_ehci(
+ const struct imx_mxc_ehci_data *data,
+ const struct mxc_usbh_platform_data *pdata);
+
+#include <mach/mmc.h>
+struct imx_mxc_mmc_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+ resource_size_t dmareq;
+};
+struct platform_device *__init imx_add_mxc_mmc(
+ const struct imx_mxc_mmc_data *data,
+ const struct imxmmc_platform_data *pdata);
+
#include <mach/mxc_nand.h>
struct imx_mxc_nand_data {
/*
@@ -99,6 +228,31 @@
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata);
+struct imx_mxc_pwm_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_pwm(
+ const struct imx_mxc_pwm_data *data);
+
+struct imx_mxc_w1_data {
+ resource_size_t iobase;
+};
+struct platform_device *__init imx_add_mxc_w1(
+ const struct imx_mxc_w1_data *data);
+
+#include <mach/esdhc.h>
+struct imx_sdhci_esdhc_imx_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_sdhci_esdhc_imx(
+ const struct imx_sdhci_esdhc_imx_data *data,
+ const struct esdhc_platform_data *pdata);
+
#include <mach/spi.h>
struct imx_spi_imx_data {
const char *devid;
@@ -110,13 +264,3 @@
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
-
-#include <mach/esdhc.h>
-struct imx_esdhc_imx_data {
- int id;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_esdhc(
- const struct imx_esdhc_imx_data *data,
- const struct esdhc_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index aeb0869..bd9bb97 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -54,15 +54,15 @@
#elif defined CONFIG_MXC_TZIC
@ Load offset & priority of the highest priority
@ interrupt pending.
+ @ 0x080 is INTSEC0 register
@ 0xD80 is HIPND0 register
mov \irqnr, #0
- mov \irqstat, #0x0D80
-1000:
- ldr \tmp, [\irqstat, \base]
- cmp \tmp, #0
- bne 1001f
- addeq \irqnr, \irqnr, #32
- addeq \irqstat, \irqstat, #4
+1000: add \irqstat, \base, \irqnr, lsr #3
+ ldr \tmp, [\irqstat, #0xd80]
+ ldr \irqstat, [\irqstat, #0x080]
+ ands \tmp, \tmp, \irqstat
+ bne 1001f
+ add \irqnr, \irqnr, #32
cmp \irqnr, #128
blo 1000b
b 2001f
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index af33b74..0044e2f 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -23,6 +23,11 @@
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+
+/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* range e.g. GPIO_1_5 is gpio 5 under linux */
+#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
+
/* use gpiolib dispatchers */
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index ebadf4a..26bb1ba 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -22,13 +22,92 @@
#include <asm/sizes.h>
-#define IMX_IO_ADDRESS(addr, module) \
- ((void __force __iomem *) \
- (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
- (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+#ifdef __ASSEMBLER__
+#define IOMEM(addr) (addr)
+#else
+#define IOMEM(addr) ((void __force __iomem *)(addr))
+#endif
+
+#define IMX_IO_P2V_MODULE(addr, module) \
+ (((addr) - module ## _BASE_ADDR) < module ## _SIZE ? \
+ (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)
+
+/*
+ * This is rather complicated for humans and ugly to verify, but for a machine
+ * it's OK. Still more as it is usually only applied to constants. The upsides
+ * on using this approach are:
+ *
+ * - same mapping on all i.MX machines
+ * - works for assembler, too
+ * - no need to nurture #defines for virtual addresses
+ *
+ * The downside it, it's hard to verify (but I have a script for that).
+ *
+ * Obviously this needs to be injective for each SoC. In general it maps the
+ * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff]
+ * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there).
+ *
+ * It applies the following mappings for the different SoCs:
+ *
+ * mx1:
+ * IO 0x00200000+0x100000 -> 0xf4000000+0x100000
+ * mx21:
+ * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000
+ * mx25:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * mx27:
+ * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000
+ * mx31:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * mx35:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * mx50:
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
+ * mx51:
+ * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
+ * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
+ * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
+ * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
+ * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
+ * mxc91231:
+ * L2CC 0x30000000+0x010000 -> 0xf4400000+0x010000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * ROMP 0x60000000+0x010000 -> 0xf5000000+0x010000
+ * AVIC 0x68000000+0x010000 -> 0xf5800000+0x010000
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * SPBA1 0x52000000+0x100000 -> 0xf5600000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ */
+#define IMX_IO_P2V(x) ( \
+ 0xf4000000 + \
+ (((x) & 0x50000000) >> 6) + \
+ (((x) & 0x0b000000) >> 4) + \
+ (((x) & 0x000fffff)))
+
+#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
#ifdef CONFIG_ARCH_MX5
+#include <mach/mx50.h>
#include <mach/mx51.h>
+#include <mach/mx53.h>
#endif
#ifdef CONFIG_ARCH_MX3
@@ -61,4 +140,11 @@
#include <mach/mxc.h>
+#define imx_map_entry(soc, name, _type) { \
+ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
+ .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \
+ .length = soc ## _ ## name ## _SIZE, \
+ .type = _type, \
+}
+
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 5263506..9de8f06 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -1,6 +1,8 @@
/*
* This structure describes the machine which we are running on.
*/
+#ifndef __MACH_IMXFB_H__
+#define __MACH_IMXFB_H__
#include <linux/fb.h>
@@ -79,3 +81,4 @@
};
void set_imx_fb_info(struct imx_fb_platform_data *);
+#endif /* ifndef __MACH_IMXFB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/plat-mxc/include/mach/iomux-mx50.h
new file mode 100644
index 0000000..058a922
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx50.h
@@ -0,0 +1,977 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_IOMUX_MX50_H__
+#define __MACH_IOMUX_MX50_H__
+
+#include <mach/iomux-v3.h>
+
+#define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
+
+#define MX50_SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
+
+#define MX50_UART_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE)
+
+#define MX50_I2C_PAD_CTRL (PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
+
+#define MX50_USB_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP)
+
+#define MX50_FEC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \
+ PAD_CTL_DSE_HIGH)
+
+#define MX50_OWIRE_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
+
+#define MX50_KEYPAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH)
+
+#define MX50_CSPI_SS_PAD (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL0__GPIO_4_0 IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL0__NANDF_CLE IOMUX_PAD(0x2CC, 0x20, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_ROW0__GPIO_4_1 IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_ROW0__NANDF_ALE IOMUX_PAD(0x2D0, 0x24, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL1__GPIO_4_2 IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL1__NANDF_CE0 IOMUX_PAD(0x2D4, 0x28, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_ROW1__GPIO_4_3 IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_ROW1__NANDF_CE1 IOMUX_PAD(0x2D8, 0x2C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_COL2__GPIO_4_4 IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL2__NANDF_CE2 IOMUX_PAD(0x2DC, 0x30, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_ROW2__GPIO_4_5 IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_ROW2__NANDF_CE3 IOMUX_PAD(0x2E0, 0x34, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL3__GPIO_4_6 IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL3__NANDF_READY IOMUX_PAD(0x2E4, 0x38, 2, 0x7b4, 0, PAD_CTL_PKE | \
+ PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define MX50_PAD_KEY_COL3__SDMA_EXT0 IOMUX_PAD(0x2E4, 0x38, 6, 0x7b8, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_ROW3__GPIO_4_7 IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_ROW3__NANDF_DQS IOMUX_PAD(0x2E8, 0x3C, 2, 0x7b0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_KEY_ROW3__SDMA_EXT1 IOMUX_PAD(0x2E8, 0x3C, 6, 0x7bc, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_I2C1_SCL__I2C1_SCL IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \
+ MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C1_SCL__GPIO_6_18 IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C1_SCL__UART2_TXD IOMUX_PAD(0x2EC, 0x40, 2, 0x7cc, 0, MX50_UART_PAD_CTRL)
+
+#define MX50_PAD_I2C1_SDA__I2C1_SDA IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \
+ MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C1_SDA__GPIO_6_19 IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C1_SDA__UART2_RXD IOMUX_PAD(0x2F0, 0x44, 2, 0x7cc, 1, MX50_UART_PAD_CTRL)
+
+#define MX50_PAD_I2C2_SCL__I2C2_SCL IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \
+ MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C2_SCL__GPIO_6_20 IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C2_SCL__UART2_CTS IOMUX_PAD(0x2F4, 0x48, 2, 0x7c8, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_I2C2_SCL__DCDC_OK IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_I2C2_SDA__I2C2_SDA IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \
+ MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C2_SDA__GPIO_6_21 IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C2_SDA__UART2_RTS IOMUX_PAD(0x2F8, 0x4C, 2, 0x7c8, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_I2C2_SDA__PWRSTABLE IOMUX_PAD(0x2F8, 0x4C, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_I2C3_SCL__I2C3_SCL IOMUX_PAD(0x2FC, 0x50, IOMUX_CONFIG_SION, 0x0, 0, \
+ MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C3_SCL__GPIO_6_22 IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SCL__FEC_MDC IOMUX_PAD(0x2FC, 0x50, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_I2C3_SCL__PMIC_RDY IOMUX_PAD(0x2FC, 0x50, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1 IOMUX_PAD(0x2FC, 0x50, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SCL__USBOTG_OC IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, MX50_USB_PAD_CTRL)
+
+#define MX50_PAD_I2C3_SDA__I2C3_SDA IOMUX_PAD(0x300, 0x54, IOMUX_CONFIG_SION, 0x0, 0, \
+ MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__GPIO_6_23 IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__FEC_MDIO IOMUX_PAD(0x300, 0x54, 2, 0x774, 0, MX50_FEC_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__PWRFAIL_INT IOMUX_PAD(0x300, 0x54, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__ALARM_DEB IOMUX_PAD(0x300, 0x54, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN1 IOMUX_PAD(0x300, 0x54, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__USBOTG_PWR IOMUX_PAD(0x300, 0x54, 7, 0x0, 0, \
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_PWM1__PWM1_PWMO IOMUX_PAD(0x304, 0x58, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM1__GPIO_6_24 IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM1__USBOTG_OC IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, MX50_USB_PAD_CTRL)
+#define MX50_PAD_PWM1__GPT_CMPOUT1 IOMUX_PAD(0x304, 0x58, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PWM2__PWM2_PWMO IOMUX_PAD(0x308, 0x5C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM2__GPIO_6_25 IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM2__USBOTG_PWR IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
+#define MX50_PAD_PWM2__DCDC_PWM IOMUX_PAD(0x308, 0x5C, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM2__GPT_CMPOUT2 IOMUX_PAD(0x308, 0x5C, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM2__ANY_PU_RST IOMUX_PAD(0x308, 0x5C, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_OWIRE__OWIRE IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, MX50_OWIRE_PAD_CTRL)
+#define MX50_PAD_OWIRE__GPIO_6_26 IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_OWIRE__USBH1_OC IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, MX50_USB_PAD_CTRL)
+#define MX50_PAD_OWIRE__SSI_EXT1_CLK IOMUX_PAD(0x30C, 0x60, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ IOMUX_PAD(0x30C, 0x60, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_OWIRE__GPT_CMPOUT3 IOMUX_PAD(0x30C, 0x60, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPITO__EPITO IOMUX_PAD(0x310, 0x64, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPITO__GPIO_6_27 IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPITO__USBH1_PWR IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
+#define MX50_PAD_EPITO__SSI_EXT2_CLK IOMUX_PAD(0x310, 0x64, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPITO__TOG_EN IOMUX_PAD(0x310, 0x64, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPITO__GPT_CLKIN IOMUX_PAD(0x310, 0x64, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_WDOG__WDOG IOMUX_PAD(0x314, 0x68, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_WDOG__GPIO_6_28 IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_WDOG__WDOG_RST IOMUX_PAD(0x314, 0x68, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_WDOG__XTAL32K IOMUX_PAD(0x314, 0x68, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SSI_TXFS__SSI_TXFS IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_TXFS__GPIO_6_0 IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SSI_TXC__SSI_TXC IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_TXC__GPIO_6_1 IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SSI_TXD__SSI_TXD IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_TXD__GPIO_6_2 IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_TXD__CSPI_RDY IOMUX_PAD(0x320, 0x74, 4, 0x6e8, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SSI_RXD__SSI_RXD IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXD__GPIO_6_3 IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXD__CSPI_SS3 IOMUX_PAD(0x324, 0x78, 4, 0x6f4, 0, MX50_CSPI_SS_PAD)
+
+#define MX50_PAD_SSI_RXFS__AUD3_RXFS IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__GPIO_6_4 IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__UART5_TXD IOMUX_PAD(0x328, 0x7C, 2, 0x7e4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__WEIM_D6 IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__CSPI_SS2 IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_SSI_RXFS__FEC_COL IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SSI_RXFS__FEC_MDC IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_SSI_RXC__AUD3_RXC IOMUX_PAD(0x32C, 0x80, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__GPIO_6_5 IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__UART5_RXD IOMUX_PAD(0x32C, 0x80, 2, 0x7e4, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__WEIM_D7 IOMUX_PAD(0x32C, 0x80, 3, 0x808, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__CSPI_SS1 IOMUX_PAD(0x32C, 0x80, 4, 0x6ec, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__FEC_MDIO IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL)
+
+#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x7c4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_TXD__GPIO_6_6 IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_RXD__GPIO_6_7 IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x7c0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__GPIO_6_8 IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__UART5_TXD IOMUX_PAD(0x338, 0x8C, 2, 0x7e4, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__SD4_D4 IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__SD4_CMD IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__GPIO_6_9 IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__UART5_RXD IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__SD4_D5 IOMUX_PAD(0x33C, 0x90, 4, 0x0, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__SD4_CLK IOMUX_PAD(0x33C, 0x90, 5, 0x0, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x7cc, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_TXD__GPIO_6_10 IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART2_TXD__SD4_D6 IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART2_TXD__SD4_D4 IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_RXD__GPIO_6_11 IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART2_RXD__SD4_D7 IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART2_RXD__SD4_D5 IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x7c8, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_CTS__GPIO_6_12 IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART2_CTS__SD4_CMD IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART2_CTS__SD4_D6 IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_RTS__GPIO_6_13 IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART2_RTS__SD4_CLK IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART2_RTS__SD4_D7 IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x350, 0xA4, 0, 0x7d4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__GPIO_6_14 IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__SD1_D4 IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__SD4_D0 IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__SD2_WP IOMUX_PAD(0x350, 0xA4, 5, 0x744, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__WEIM_D12 IOMUX_PAD(0x350, 0xA4, 6, 0x81c, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x354, 0xA8, 0, 0x7d4, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__GPIO_6_15 IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__SD1_D5 IOMUX_PAD(0x354, 0xA8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__SD4_D1 IOMUX_PAD(0x354, 0xA8, 4, 0x754, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__SD2_CD IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__WEIM_D13 IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART4_TXD__UART4_TXD IOMUX_PAD(0x358, 0xAC, 0, 0x7dc, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__GPIO_6_16 IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__UART3_CTS IOMUX_PAD(0x358, 0xAC, 2, 0x7d0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__SD1_D6 IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__SD4_D2 IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__SD2_LCTL IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__WEIM_D14 IOMUX_PAD(0x358, 0xAC, 6, 0x824, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART4_RXD__UART4_RXD IOMUX_PAD(0x35C, 0xB0, 0, 0x7dc, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__GPIO_6_17 IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__UART3_RTS IOMUX_PAD(0x35C, 0xB0, 2, 0x7d0, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__SD1_D7 IOMUX_PAD(0x35C, 0xB0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__SD4_D3 IOMUX_PAD(0x35C, 0xB0, 4, 0x75c, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__SD1_LCTL IOMUX_PAD(0x35C, 0xB0, 5, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__WEIM_D15 IOMUX_PAD(0x35C, 0xB0, 6, 0x828, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK IOMUX_PAD(0x360, 0xB4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_CSPI_SCLK__GPIO_4_8 IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_CSPI_MOSI__GPIO_4_9 IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_CSPI_MISO__CSPI_MISO IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_CSPI_MISO__GPIO_4_10 IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_CSPI_SS0__CSPI_SS0 IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_CSPI_SS0__GPIO_4_11 IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x370, 0xC4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12 IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY IOMUX_PAD(0x370, 0xC4, 2, 0x6e8, 1, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY IOMUX_PAD(0x370, 0xC4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS IOMUX_PAD(0x370, 0xC4, 4, 0x7d0, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE6 IOMUX_PAD(0x370, 0xC4, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__WEIM_D8 IOMUX_PAD(0x370, 0xC4, 7, 0x80c, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x374, 0xC8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13 IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1 IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS IOMUX_PAD(0x374, 0xC8, 4, 0x7d0, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7 IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__WEIM_D9 IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x378, 0xCC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MISO__GPIO_4_14 IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2 IOMUX_PAD(0x378, 0xCC, 2, 0x6f0, 1, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2 IOMUX_PAD(0x378, 0xCC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS IOMUX_PAD(0x378, 0xCC, 4, 0x7d8, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE8 IOMUX_PAD(0x378, 0xCC, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MISO__WEIM_D10 IOMUX_PAD(0x378, 0xCC, 7, 0x814, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x37C, 0xD0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_SS0__GPIO_4_15 IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3 IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3 IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS IOMUX_PAD(0x37C, 0xD0, 4, 0x7d8, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9 IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SS0__WEIM_D11 IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK IOMUX_PAD(0x380, 0xD4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16 IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR IOMUX_PAD(0x380, 0xD4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY IOMUX_PAD(0x380, 0xD4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS IOMUX_PAD(0x380, 0xD4, 4, 0x7e0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK IOMUX_PAD(0x380, 0xD4, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__NANDF_CEN4 IOMUX_PAD(0x380, 0xD4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__WEIM_D8 IOMUX_PAD(0x380, 0xD4, 7, 0x80c, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI IOMUX_PAD(0x384, 0xD8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17 IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1 IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS IOMUX_PAD(0x384, 0xD8, 4, 0x7e0, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5 IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__WEIM_D9 IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO IOMUX_PAD(0x388, 0xDC, 0, 0x73c, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__GPIO_4_18 IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2 IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD IOMUX_PAD(0x388, 0xDC, 4, 0x7e4, 4, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC IOMUX_PAD(0x388, 0xDC, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__NANDF_CEN6 IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__WEIM_D10 IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0 IOMUX_PAD(0x38C, 0xE0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI2_SS0__GPIO_4_19 IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS IOMUX_PAD(0x38C, 0xE0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__ECSPI1_SS3 IOMUX_PAD(0x38C, 0xE0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD IOMUX_PAD(0x38C, 0xE0, 4, 0x7e4, 5, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC IOMUX_PAD(0x38C, 0xE0, 5, 0x6f8, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__NANDF_CEN7 IOMUX_PAD(0x38C, 0xE0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__WEIM_D11 IOMUX_PAD(0x38C, 0xE0, 7, 0x818, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x390, 0xE4, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_CLK__GPIO_5_0 IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_CLK__CLKO IOMUX_PAD(0x390, 0xE4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x394, 0xE8, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_CMD__GPIO_5_1 IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_CMD__CLKO2 IOMUX_PAD(0x394, 0xE8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_D0__SD1_D0 IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_D0__GPIO_5_2 IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_D0__PLL1_BYP IOMUX_PAD(0x398, 0xEC, 7, 0x6dc, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_D1__SD1_D1 IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_D1__GPIO_5_3 IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_D1__PLL2_BYP IOMUX_PAD(0x39C, 0xF0, 7, 0x6e0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_D2__SD1_D2 IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_D2__GPIO_5_4 IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_D2__PLL3_BYP IOMUX_PAD(0x3A0, 0xF4, 7, 0x6e4, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_D3__SD1_D3 IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_D3__GPIO_5_5 IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x3A8, 0xFC, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_CLK__GPIO_5_6 IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CLK__MSHC_SCLK IOMUX_PAD(0x3A8, 0xFC, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x3AC, 0x100, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_CMD__GPIO_5_7 IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CMD__MSHC_BS IOMUX_PAD(0x3AC, 0x100, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_SD2_D0__SD2_D0 IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D0__GPIO_5_8 IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D0__MSHC_D0 IOMUX_PAD(0x3B0, 0x104, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D0__KEY_COL4 IOMUX_PAD(0x3B0, 0x104, 3, 0x790, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D1__SD2_D1 IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D1__GPIO_5_9 IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D1__MSHC_D1 IOMUX_PAD(0x3B4, 0x108, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D1__KEY_ROW4 IOMUX_PAD(0x3B4, 0x108, 3, 0x7a0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D2__SD2_D2 IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D2__GPIO_5_10 IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D2__MSHC_D2 IOMUX_PAD(0x3B8, 0x10C, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D2__KEY_COL5 IOMUX_PAD(0x3B8, 0x10C, 3, 0x794, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D3__SD2_D3 IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D3__GPIO_5_11 IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D3__MSHC_D3 IOMUX_PAD(0x3BC, 0x110, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D3__KEY_ROW5 IOMUX_PAD(0x3BC, 0x110, 3, 0x7a4, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D4__SD2_D4 IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D4__GPIO_5_12 IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D4__AUD4_RXFS IOMUX_PAD(0x3C0, 0x114, 2, 0x6d0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D4__KEY_COL6 IOMUX_PAD(0x3C0, 0x114, 3, 0x798, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D4__WEIM_D0 IOMUX_PAD(0x3C0, 0x114, 4, 0x7ec, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D4__CCM_OUT0 IOMUX_PAD(0x3C0, 0x114, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D5__SD2_D5 IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D5__GPIO_5_13 IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D5__AUD4_RXC IOMUX_PAD(0x3C4, 0x118, 2, 0x6cc, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D5__KEY_ROW6 IOMUX_PAD(0x3C4, 0x118, 3, 0x7a8, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D5__WEIM_D1 IOMUX_PAD(0x3C4, 0x118, 4, 0x7f0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D5__CCM_OUT1 IOMUX_PAD(0x3C4, 0x118, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D6__SD2_D6 IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D6__GPIO_5_14 IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D6__AUD4_RXD IOMUX_PAD(0x3C8, 0x11C, 2, 0x6c4, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D6__KEY_COL7 IOMUX_PAD(0x3C8, 0x11C, 3, 0x79c, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D6__WEIM_D2 IOMUX_PAD(0x3C8, 0x11C, 4, 0x7f4, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D6__CCM_OUT2 IOMUX_PAD(0x3C8, 0x11C, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D7__SD2_D7 IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D7__GPIO_5_15 IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D7__AUD4_TXFS IOMUX_PAD(0x3CC, 0x120, 2, 0x6d8, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D7__KEY_ROW7 IOMUX_PAD(0x3CC, 0x120, 3, 0x7ac, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D7__WEIM_D3 IOMUX_PAD(0x3CC, 0x120, 4, 0x7f8, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D7__CCM_STOP IOMUX_PAD(0x3CC, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_WP__SD2_WP IOMUX_PAD(0x3D0, 0x124, 0, 0x744, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_WP__GPIO_5_16 IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_WP__AUD4_TXD IOMUX_PAD(0x3D0, 0x124, 2, 0x6c8, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_WP__WEIM_D4 IOMUX_PAD(0x3D0, 0x124, 4, 0x7fc, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_WP__CCM_WAIT IOMUX_PAD(0x3D0, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_CD__SD2_CD IOMUX_PAD(0x3D4, 0x128, 0, 0x740, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_CD__GPIO_5_17 IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CD__AUD4_TXC IOMUX_PAD(0x3D4, 0x128, 2, 0x6d4, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CD__WEIM_D5 IOMUX_PAD(0x3D4, 0x128, 4, 0x800, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CD__CCM_REF_EN IOMUX_PAD(0x3D4, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x3D8, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x3DC, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B IOMUX_PAD(0x3E0, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1 IOMUX_PAD(0x3E4, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B IOMUX_PAD(0x3E8, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0 IOMUX_PAD(0x3EC, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE IOMUX_PAD(0x3F0, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS IOMUX_PAD(0x3F4, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD IOMUX_PAD(0x3F8, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB IOMUX_PAD(0x3FC, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI IOMUX_PAD(0x400, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK IOMUX_PAD(0x404, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO IOMUX_PAD(0x408, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D0__DISP_D0 IOMUX_PAD(0x40C, 0x12C, 0, 0x6fc, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D0__GPIO_2_0 IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D0__FEC_TXCLK IOMUX_PAD(0x40C, 0x12C, 2, 0x78c, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+
+#define MX50_PAD_DISP_D1__DISP_D1 IOMUX_PAD(0x410, 0x130, 0, 0x700, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D1__GPIO_2_1 IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D1__FEC_RX_ER IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX50_PAD_DISP_D1__WEIM_A17 IOMUX_PAD(0x410, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D2__DISP_D2 IOMUX_PAD(0x414, 0x134, 0, 0x704, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D2__GPIO_2_2 IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D2__FEC_RX_DV IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX50_PAD_DISP_D2__WEIM_A18 IOMUX_PAD(0x414, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D3__DISP_D3 IOMUX_PAD(0x418, 0x138, 0, 0x708, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D3__GPIO_2_3 IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D3__FEC_RXD1 IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX50_PAD_DISP_D3__WEIM_A19 IOMUX_PAD(0x418, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D3__FEC_COL IOMUX_PAD(0x418, 0x138, 4, 0x770, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D4__DISP_D4 IOMUX_PAD(0x41C, 0x13C, 0, 0x70c, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D4__GPIO_2_4 IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D4__FEC_RXD0 IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX50_PAD_DISP_D4__WEIM_A20 IOMUX_PAD(0x41C, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D5__DISP_D5 IOMUX_PAD(0x420, 0x140, 0, 0x710, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D5__GPIO_2_5 IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D5__FEC_TX_EN IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_DISP_D5__WEIM_A21 IOMUX_PAD(0x420, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D6__DISP_D6 IOMUX_PAD(0x424, 0x144, 0, 0x714, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D6__GPIO_2_6 IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D6__FEC_TXD1 IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_DISP_D6__WEIM_A22 IOMUX_PAD(0x424, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D6__FEC_RX_CLK IOMUX_PAD(0x424, 0x144, 4, 0x780, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D7__DISP_D7 IOMUX_PAD(0x428, 0x148, 0, 0x718, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D7__GPIO_2_7 IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D7__FEC_TXD0 IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_DISP_D7__WEIM_A23 IOMUX_PAD(0x428, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+
+
+#define MX50_PAD_DISP_WR__ELCDIF_WR IOMUX_PAD(0x42C, 0x14C, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_WR__GPIO_2_16 IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_WR__WEIM_A24 IOMUX_PAD(0x42C, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_RD__ELCDIF_RD IOMUX_PAD(0x430, 0x150, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RD__GPIO_2_19 IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_RD__ELCDIF_EN IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RD__WEIM_A25 IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_RS__ELCDIF_RS IOMUX_PAD(0x434, 0x154, 0, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RS__GPIO_2_17 IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RS__WEIM_A26 IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_CS__ELCDIF_CS IOMUX_PAD(0x438, 0x158, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_CS__GPIO_2_21 IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC IOMUX_PAD(0x438, 0x158, 2, 0x6f8, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_CS__WEIM_A27 IOMUX_PAD(0x438, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_CS__WEIM_CS3 IOMUX_PAD(0x438, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_BUSY__ELCDIF_HSYNC IOMUX_PAD(0x43C, 0x15C, 0, 0x6f8, 2, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_BUSY__GPIO_2_18 IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_BUSY__WEIM_CS3 IOMUX_PAD(0x43C, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_RESET__ELCDIF_RST IOMUX_PAD(0x440, 0x160, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RESET__GPIO_2_20 IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_RESET__WEIM_CS3 IOMUX_PAD(0x440, 0x160, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_CMD__SD3_CMD IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_CMD__GPIO_5_18 IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_CMD__NANDF_WRN IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_CMD__SSP_CMD IOMUX_PAD(0x444, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_CLK__SD3_CLK IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_CLK__GPIO_5_19 IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_CLK__NANDF_RDN IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_CLK__SSP_CLK IOMUX_PAD(0x448, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D0__SD3_D0 IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D0__GPIO_5_20 IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D0__NANDF_D4 IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D0__SSP_D0 IOMUX_PAD(0x44C, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD3_D0__PLL1_BYP IOMUX_PAD(0x44C, 0x16C, 7, 0x6dc, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D1__SD3_D1 IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D1__GPIO_5_21 IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D1__NANDF_D5 IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D1__PLL2_BYP IOMUX_PAD(0x450, 0x170, 7, 0x6e0, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D2__SD3_D2 IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D2__GPIO_5_22 IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D2__NANDF_D6 IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D2__SSP_D2 IOMUX_PAD(0x454, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD3_D2__PLL3_BYP IOMUX_PAD(0x454, 0x174, 7, 0x6e4, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D3__SD3_D3 IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D3__GPIO_5_23 IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D3__NANDF_D7 IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D3__SSP_D3 IOMUX_PAD(0x458, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D4__SD3_D4 IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D4__GPIO_5_24 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D4__NANDF_D0 IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D4__SSP_D4 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D5__SD3_D5 IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D5__GPIO_5_25 IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D5__NANDF_D1 IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D5__SSP_D5 IOMUX_PAD(0x460, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D6__SD3_D6 IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D6__GPIO_5_26 IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D6__NANDF_D2 IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D6__SSP_D6 IOMUX_PAD(0x464, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D7__SD3_D7 IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D7__GPIO_5_27 IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D7__NANDF_D3 IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D7__SSP_D7 IOMUX_PAD(0x468, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_WP__SD3_WP IOMUX_PAD(0x46C, 0x18C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_WP__GPIO_5_28 IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_WP__NANDF_RESETN IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_WP__SSP_CD IOMUX_PAD(0x46C, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD3_WP__SD4_LCTL IOMUX_PAD(0x46C, 0x18C, 4, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_WP__WEIM_CS3 IOMUX_PAD(0x46C, 0x18C, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D8__DISP_D8 IOMUX_PAD(0x470, 0x190, 0, 0x71c, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D8__GPIO_2_8 IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D8__NANDF_CLE IOMUX_PAD(0x470, 0x190, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D8__SD1_LCTL IOMUX_PAD(0x470, 0x190, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D8__SD4_CMD IOMUX_PAD(0x470, 0x190, 4, 0x74c, 2, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D8__KEY_COL4 IOMUX_PAD(0x470, 0x190, 5, 0x790, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D8__FEC_TX_CLK IOMUX_PAD(0x470, 0x190, 6, 0x78c, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D9__DISP_D9 IOMUX_PAD(0x474, 0x194, 0, 0x720, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D9__GPIO_2_9 IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D9__NANDF_ALE IOMUX_PAD(0x474, 0x194, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D9__SD2_LCTL IOMUX_PAD(0x474, 0x194, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D9__SD4_CLK IOMUX_PAD(0x474, 0x194, 4, 0x748, 2, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D9__KEY_ROW4 IOMUX_PAD(0x474, 0x194, 5, 0x7a0, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D9__FEC_RX_ER IOMUX_PAD(0x474, 0x194, 6, 0x788, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D10__DISP_D10 IOMUX_PAD(0x478, 0x198, 0, 0x724, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D10__GPIO_2_10 IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D10__NANDF_CEN0 IOMUX_PAD(0x478, 0x198, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D10__SD3_LCTL IOMUX_PAD(0x478, 0x198, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D10__SD4_D0 IOMUX_PAD(0x478, 0x198, 4, 0x750, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D10__KEY_COL5 IOMUX_PAD(0x478, 0x198, 5, 0x794, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D10__FEC_RX_DV IOMUX_PAD(0x478, 0x198, 6, 0x784, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D11__DISP_D11 IOMUX_PAD(0x47C, 0x19C, 0, 0x728, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D11__GPIO_2_11 IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D11__NANDF_CEN1 IOMUX_PAD(0x47C, 0x19C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D11__SD4_D1 IOMUX_PAD(0x47C, 0x19C, 4, 0x754, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D11__KEY_ROW5 IOMUX_PAD(0x47C, 0x19C, 5, 0x7a4, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D11__FEC_RDAT1 IOMUX_PAD(0x47C, 0x19C, 6, 0x77c, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D12__DISP_D12 IOMUX_PAD(0x480, 0x1A0, 0, 0x72c, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D12__GPIO_2_12 IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D12__NANDF_CEN2 IOMUX_PAD(0x480, 0x1A0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D12__SD1_CD IOMUX_PAD(0x480, 0x1A0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D12__SD4_D2 IOMUX_PAD(0x480, 0x1A0, 4, 0x758, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D12__KEY_COL6 IOMUX_PAD(0x480, 0x1A0, 5, 0x798, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D12__FEC_RDAT0 IOMUX_PAD(0x480, 0x1A0, 6, 0x778, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D13__DISP_D13 IOMUX_PAD(0x484, 0x1A4, 0, 0x730, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D13__GPIO_2_13 IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D13__NANDF_CEN3 IOMUX_PAD(0x484, 0x1A4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D13__SD3_CD IOMUX_PAD(0x484, 0x1A4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D13__SD4_D3 IOMUX_PAD(0x484, 0x1A4, 4, 0x75c, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D13__KEY_ROW6 IOMUX_PAD(0x484, 0x1A4, 5, 0x7a8, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D13__FEC_TX_EN IOMUX_PAD(0x484, 0x1A4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D14__DISP_D14 IOMUX_PAD(0x488, 0x1A8, 0, 0x734, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D14__GPIO_2_14 IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D14__NANDF_RDY0 IOMUX_PAD(0x488, 0x1A8, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D14__SD1_WP IOMUX_PAD(0x488, 0x1A8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D14__SD4_WP IOMUX_PAD(0x488, 0x1A8, 4, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D14__KEY_COL7 IOMUX_PAD(0x488, 0x1A8, 5, 0x79c, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D14__FEC_TDAT1 IOMUX_PAD(0x488, 0x1A8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D15__DISP_D15 IOMUX_PAD(0x48C, 0x1AC, 0, 0x738, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D15__GPIO_2_15 IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D15__NANDF_DQS IOMUX_PAD(0x48C, 0x1AC, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D15__SD3_RST IOMUX_PAD(0x48C, 0x1AC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D15__SD4_CD IOMUX_PAD(0x48C, 0x1AC, 4, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D15__KEY_ROW7 IOMUX_PAD(0x48C, 0x1AC, 5, 0x7ac, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D15__FEC_TDAT0 IOMUX_PAD(0x48C, 0x1AC, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D0__EPDC_D0 IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D0__GPIO_3_0 IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D0__WEIM_D0 IOMUX_PAD(0x54C, 0x1B0, 2, 0x7ec, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D0__ELCDIF_RS IOMUX_PAD(0x54C, 0x1B0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D0__ELCDIF_PIXCLK IOMUX_PAD(0x54C, 0x1B0, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D1__EPDC_D1 IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D1__GPIO_3_1 IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D1__WEIM_D1 IOMUX_PAD(0x550, 0x1B4, 2, 0x7f0, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D1__ELCDIF_CS IOMUX_PAD(0x550, 0x1B4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D1__ELCDIF_EN IOMUX_PAD(0x550, 0x1B4, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D2__EPDC_D2 IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D2__GPIO_3_2 IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D2__WEIM_D2 IOMUX_PAD(0x554, 0x1B8, 2, 0x7f4, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D2__ELCDIF_WR IOMUX_PAD(0x554, 0x1B8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC IOMUX_PAD(0x554, 0x1B8, 4, 0x73c, 2, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D3__EPDC_D3 IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D3__GPIO_3_3 IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D3__WEIM_D3 IOMUX_PAD(0x558, 0x1BC, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D3__ELCDIF_RD IOMUX_PAD(0x558, 0x1BC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC IOMUX_PAD(0x558, 0x1BC, 4, 0x6f8, 3, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D4__EPDC_D4 IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D4__GPIO_3_4 IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D4__WEIM_D4 IOMUX_PAD(0x55C, 0x1C0, 2, 0x7fc, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D5__EPDC_D5 IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D5__GPIO_3_5 IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D5__WEIM_D5 IOMUX_PAD(0x560, 0x1C4, 2, 0x800, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D6__EPDC_D6 IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D6__GPIO_3_6 IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D6__WEIM_D6 IOMUX_PAD(0x564, 0x1C8, 2, 0x804, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D7__EPDC_D7 IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D7__GPIO_3_7 IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D7__WEIM_D7 IOMUX_PAD(0x568, 0x1CC, 2, 0x808, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D8__EPDC_D8 IOMUX_PAD(0x56C, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D8__GPIO_3_8 IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D8__WEIM_D8 IOMUX_PAD(0x56C, 0x1D0, 2, 0x80c, 2, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D8__ELCDIF_D24 IOMUX_PAD(0x56C, 0x1D0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D9__EPDC_D9 IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D9__GPIO_3_9 IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D9__WEIM_D9 IOMUX_PAD(0x570, 0x1D4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D9__ELCDIF_D25 IOMUX_PAD(0x570, 0x1D4, 3, 0x810, 2, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D10__EPDC_D10 IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D10__GPIO_3_10 IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D10__WEIM_D10 IOMUX_PAD(0x574, 0x1D8, 2, 0x814, 2, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D10__ELCDIF_D26 IOMUX_PAD(0x574, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D11__EPDC_D11 IOMUX_PAD(0x578, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D11__GPIO_3_11 IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D11__WEIM_D11 IOMUX_PAD(0x578, 0x1DC, 2, 0x818, 2, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D11__ELCDIF_D27 IOMUX_PAD(0x578, 0x1DC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D12__EPDC_D12 IOMUX_PAD(0x57C, 0x1E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D12__GPIO_3_12 IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D12__WEIM_D12 IOMUX_PAD(0x57C, 0x1E0, 2, 0x81c, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D12__ELCDIF_D28 IOMUX_PAD(0x57C, 0x1E0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D13__EPDC_D13 IOMUX_PAD(0x580, 0x1E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D13__GPIO_3_13 IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D13__WEIM_D13 IOMUX_PAD(0x580, 0x1E4, 2, 0x820, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D13__ELCDIF_D29 IOMUX_PAD(0x580, 0x1E4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D14__EPDC_D14 IOMUX_PAD(0x584, 0x1E8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D14__GPIO_3_14 IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D14__WEIM_D14 IOMUX_PAD(0x584, 0x1E8, 2, 0x824, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D14__ELCDIF_D30 IOMUX_PAD(0x584, 0x1E8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D14__AUD6_TXD IOMUX_PAD(0x584, 0x1E8, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D15__EPDC_D15 IOMUX_PAD(0x588, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D15__GPIO_3_15 IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D15__WEIM_D15 IOMUX_PAD(0x588, 0x1EC, 2, 0x828, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D15__ELCDIF_D31 IOMUX_PAD(0x588, 0x1EC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D15__AUD6_TXC IOMUX_PAD(0x588, 0x1EC, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDCLK__GPIO_3_16 IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDCLK__WEIM_D16 IOMUX_PAD(0x58C, 0x1F0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_D16 IOMUX_PAD(0x58C, 0x1F0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_GDCLK__AUD6_TXFS IOMUX_PAD(0x58C, 0x1F0, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_GDSP__EPDC_GDSP IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDSP__GPIO_3_17 IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDSP__WEIM_D17 IOMUX_PAD(0x590, 0x1F4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDSP__ELCDIF_D17 IOMUX_PAD(0x590, 0x1F4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_GDSP__AUD6_RXD IOMUX_PAD(0x590, 0x1F4, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_GDOE__EPDC_GDOE IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDOE__GPIO_3_18 IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDOE__WEIM_D18 IOMUX_PAD(0x594, 0x1F8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDOE__ELCDIF_D18 IOMUX_PAD(0x594, 0x1F8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_GDOE__AUD6_RXC IOMUX_PAD(0x594, 0x1F8, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_GDRL__EPDC_GDRL IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDRL__GPIO_3_19 IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDRL__WEIM_D19 IOMUX_PAD(0x598, 0x1FC, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDRL__ELCDIF_D19 IOMUX_PAD(0x598, 0x1FC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_GDRL__AUD6_RXFS IOMUX_PAD(0x598, 0x1FC, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLK__GPIO_3_20 IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLK__WEIM_D20 IOMUX_PAD(0x59C, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_D20 IOMUX_PAD(0x59C, 0x200, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLK__AUD5_TXD IOMUX_PAD(0x59C, 0x200, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDOEZ__EPDC_SDOEZ IOMUX_PAD(0x5A0, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21 IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOEZ__WEIM_D21 IOMUX_PAD(0x5A0, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_D21 IOMUX_PAD(0x5A0, 0x204, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOEZ__AUD5_TXC IOMUX_PAD(0x5A0, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDOED__EPDC_SDOED IOMUX_PAD(0x5A4, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOED__GPIO_3_22 IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOED__WEIM_D22 IOMUX_PAD(0x5A4, 0x208, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOED__ELCDIF_D22 IOMUX_PAD(0x5A4, 0x208, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOED__AUD5_TXFS IOMUX_PAD(0x5A4, 0x208, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDOE__EPDC_SDOE IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOE__GPIO_3_23 IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOE__WEIM_D23 IOMUX_PAD(0x5A8, 0x20C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOE__ELCDIF_D23 IOMUX_PAD(0x5A8, 0x20C, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOE__AUD5_RXD IOMUX_PAD(0x5A8, 0x20C, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDLE__EPDC_SDLE IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDLE__GPIO_3_24 IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDLE__WEIM_D24 IOMUX_PAD(0x5AC, 0x210, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDLE__ELCDIF_D8 IOMUX_PAD(0x5AC, 0x210, 3, 0x71c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDLE__AUD5_RXC IOMUX_PAD(0x5AC, 0x210, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCLKN__EPDC_SDCLKN IOMUX_PAD(0x5B0, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25 IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLKN__WEIM_D25 IOMUX_PAD(0x5B0, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_D9 IOMUX_PAD(0x5B0, 0x214, 3, 0x720, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLKN__AUD5_RXFS IOMUX_PAD(0x5B0, 0x214, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDSHR__GPIO_3_26 IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDSHR__WEIM_D26 IOMUX_PAD(0x5B4, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_D10 IOMUX_PAD(0x5B4, 0x218, 3, 0x724, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDSHR__AUD4_TXD IOMUX_PAD(0x5B4, 0x218, 4, 0x6c8, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCOM__EPDC_PWRCOM IOMUX_PAD(0x5B8, 0x21C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27 IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCOM__WEIM_D27 IOMUX_PAD(0x5B8, 0x21C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_D11 IOMUX_PAD(0x5B8, 0x21C, 3, 0x728, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCOM__AUD4_TXC IOMUX_PAD(0x5B8, 0x21C, 4, 0x6d4, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRSTAT__EPDC_PWRSTAT IOMUX_PAD(0x5BC, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28 IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRSTAT__WEIM_D28 IOMUX_PAD(0x5BC, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_D12 IOMUX_PAD(0x5BC, 0x220, 3, 0x72c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRSTAT__AUD4_TXFS IOMUX_PAD(0x5BC, 0x220, 4, 0x6d8, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCTRL0__EPDC_PWRCTRL0 IOMUX_PAD(0x5C0, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29 IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL0__WEIM_D29 IOMUX_PAD(0x5C0, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_D13 IOMUX_PAD(0x5C0, 0x224, 3, 0x730, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL0__AUD4_RXD IOMUX_PAD(0x5C0, 0x224, 4, 0x6c4, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCTRL1__EPDC_PWRCTRL1 IOMUX_PAD(0x5C4, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30 IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL1__WEIM_D30 IOMUX_PAD(0x5C4, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_D14 IOMUX_PAD(0x5C4, 0x228, 3, 0x734, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL1__AUD4_RXC IOMUX_PAD(0x5C4, 0x228, 4, 0x6cc, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCTRL2__EPDC_PWRCTRL2 IOMUX_PAD(0x5C8, 0x22C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31 IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__WEIM_D31 IOMUX_PAD(0x5C8, 0x22C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_D15 IOMUX_PAD(0x5C8, 0x22C, 3, 0x738, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__AUD4_RXFS IOMUX_PAD(0x5C8, 0x22C, 4, 0x6d0, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT0 IOMUX_PAD(0x5C8, 0x22C, 6, 0x7b8, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCTRL3__PWRCTRL3 IOMUX_PAD(0x5CC, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20 IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL3__WEIM_EB2 IOMUX_PAD(0x5CC, 0x230, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT1 IOMUX_PAD(0x5CC, 0x230, 6, 0x7bc, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_VCOM0__EPDC_VCOM0 IOMUX_PAD(0x5D0, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_VCOM0__GPIO_4_21 IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_VCOM0__WEIM_EB3 IOMUX_PAD(0x5D0, 0x234, 2, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_VCOM1__EPDC_VCOM1 IOMUX_PAD(0x5D4, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_VCOM1__GPIO_4_22 IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_VCOM1__WEIM_CS3 IOMUX_PAD(0x5D4, 0x238, 2, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_BDR0__EPDC_BDR0 IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_BDR0__GPIO_4_23 IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_BDR0__ELCDIF_D7 IOMUX_PAD(0x5D8, 0x23C, 3, 0x718, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_BDR1__EPDC_BDR1 IOMUX_PAD(0x5DC, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_BDR1__GPIO_4_24 IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_BDR1__ELCDIF_D6 IOMUX_PAD(0x5DC, 0x240, 3, 0x714, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0 IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE0__GPIO_4_25 IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_D5 IOMUX_PAD(0x5E0, 0x244, 3, 0x710, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1 IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE1__GPIO_4_26 IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_D4 IOMUX_PAD(0x5E4, 0x248, 2, 0x70c, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2 IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE2__GPIO_4_27 IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT3 IOMUX_PAD(0x5E8, 0x24C, 3, 0x708, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE3__EPDC_SDCE3 IOMUX_PAD(0x5EC, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE3__GPIO_4_28 IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_D2 IOMUX_PAD(0x5EC, 0x250, 3, 0x704, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE4__EPDC_SDCE4 IOMUX_PAD(0x5F0, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE4__GPIO_4_29 IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_D1 IOMUX_PAD(0x5F0, 0x254, 3, 0x700, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE5__EPDC_SDCE5 IOMUX_PAD(0x5F4, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE5__GPIO_4_30 IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_D0 IOMUX_PAD(0x5F4, 0x258, 3, 0x6fc, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA0__WEIM_A0 IOMUX_PAD(0x5F8, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA0__GPIO_1_0 IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA0__KEY_COL4 IOMUX_PAD(0x5f8, 0x25C, 3, 0x790, 2, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA1__WEIM_A1 IOMUX_PAD(0x5FC, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA1__GPIO_1_1 IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA1__KEY_ROW4 IOMUX_PAD(0x5fc, 0x260, 3, 0x7a0, 2, MX50_KEYPAD_CTRL)
+
+#define MX50_PAD_EIM_DA2__WEIM_A2 IOMUX_PAD(0x600, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA2__GPIO_1_2 IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA2__KEY_COL5 IOMUX_PAD(0x600, 0x264, 3, 0x794, 2, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA3__WEIM_A3 IOMUX_PAD(0x604, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA3__GPIO_1_3 IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA3__KEY_ROW5 IOMUX_PAD(0x604, 0x268, 3, 0x7a4, 2, MX50_KEYPAD_CTRL)
+
+#define MX50_PAD_EIM_DA4__WEIM_A4 IOMUX_PAD(0x608, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA4__GPIO_1_4 IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA4__KEY_COL6 IOMUX_PAD(0x608, 0x26C, 3, 0x798, 2, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA5__WEIM_A5 IOMUX_PAD(0x60C, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA5__GPIO_1_5 IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA5__KEY_ROW6 IOMUX_PAD(0x60C, 0x270, 3, 0x7a8, 2, MX50_KEYPAD_CTRL)
+
+#define MX50_PAD_EIM_DA6__WEIM_A6 IOMUX_PAD(0x610, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA6__GPIO_1_6 IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA6__KEY_COL7 IOMUX_PAD(0x610, 0x274, 3, 0x79c, 2, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA7__WEIM_A7 IOMUX_PAD(0x614, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA7__GPIO_1_7 IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA7__KEY_ROW7 IOMUX_PAD(0x614, 0x278, 3, 0x7ac, 2, MX50_KEYPAD_CTRL)
+
+#define MX50_PAD_EIM_DA8__WEIM_A8 IOMUX_PAD(0x618, 0x27C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA8__GPIO_1_8 IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA8__NANDF_CLE IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_EIM_DA9__WEIM_A9 IOMUX_PAD(0x61C, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA9__GPIO_1_9 IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA9__NANDF_ALE IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_EIM_DA10__WEIM_A10 IOMUX_PAD(0x620, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA10__GPIO_1_10 IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA10__NANDF_CE0 IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_EIM_DA11__WEIM_A11 IOMUX_PAD(0x624, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA11__GPIO_1_11 IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA11__NANDF_CE1 IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_EIM_DA12__WEIM_A12 IOMUX_PAD(0x628, 0x28C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA12__GPIO_1_12 IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA12__NANDF_CE2 IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_EIM_DA12__EPDC_SDCE6 IOMUX_PAD(0x628, 0x28C, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA13__WEIM_A13 IOMUX_PAD(0x62C, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA13__GPIO_1_13 IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA13__NANDF_CE3 IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PIN_EIM_DA13__EPDC_SDCE7 IOMUX_PAD(0x62C, 0x290, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA14__WEIM_A14 IOMUX_PAD(0x630, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA14__GPIO_1_14 IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA14__NANDF_READY IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, PAD_CTL_PKE | \
+ PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define MX50_PAD_EIM_DA14__EPDC_SDCE8 IOMUX_PAD(0x630, 0x294, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA15__WEIM_A15 IOMUX_PAD(0x634, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA15__GPIO_1_15 IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA15__NANDF_DQS IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_EIM_DA15__EPDC_SDCE9 IOMUX_PAD(0x634, 0x298, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_CS2__WEIM_CS2 IOMUX_PAD(0x638, 0x29C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CS2__GPIO_1_16 IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CS2__WEIM_A27 IOMUX_PAD(0x638, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_CS1__WEIM_CS1 IOMUX_PAD(0x63C, 0x2A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CS1__GPIO_1_17 IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_CS0__WEIM_CS0 IOMUX_PAD(0x640, 0x2A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CS0__GPIO_1_18 IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_EB0__WEIM_EB0 IOMUX_PAD(0x644, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_EB0__GPIO_1_19 IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_EB1__WEIM_EB1 IOMUX_PAD(0x648, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_EB1__GPIO_1_20 IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_WAIT__WEIM_WAIT IOMUX_PAD(0x64C, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_WAIT__GPIO_1_21 IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_BCLK__WEIM_BCLK IOMUX_PAD(0x650, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_BCLK__GPIO_1_22 IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_RDY__WEIM_RDY IOMUX_PAD(0x654, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_RDY__GPIO_1_23 IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_OE__WEIM_OE IOMUX_PAD(0x658, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_OE__GPIO_1_24 IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_RW__WEIM_RW IOMUX_PAD(0x65C, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_RW__GPIO_1_25 IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_LBA__WEIM_LBA IOMUX_PAD(0x660, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_LBA__GPIO_1_26 IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_CRE__WEIM_CRE IOMUX_PAD(0x664, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CRE__GPIO_1_27 IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX50_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index d7a41e9..b6767f9 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -15,373 +15,1553 @@
#include <mach/iomux-v3.h>
-/*
- * various IOMUX alternate output functions (1-7)
- */
-typedef enum iomux_config {
- IOMUX_CONFIG_ALT0,
- IOMUX_CONFIG_ALT1,
- IOMUX_CONFIG_ALT2,
- IOMUX_CONFIG_ALT3,
- IOMUX_CONFIG_ALT4,
- IOMUX_CONFIG_ALT5,
- IOMUX_CONFIG_ALT6,
- IOMUX_CONFIG_ALT7,
- IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
- IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
-} iomux_pin_cfg_t;
-
/* Pad control groupings */
-#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_DSE_HIGH)
-#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_SRE_FAST)
-#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_SRE_FAST)
+#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_HYS | PAD_CTL_SRE_FAST)
#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
-#define MX51_USBH1_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
- PAD_CTL_PKE | PAD_CTL_HYS)
-#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
- PAD_CTL_SRE_FAST)
-#define MX51_GPIO_PAD_CTRL_2 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP)
-#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_SRE_FAST)
-#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
- PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DVS)
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_HYS)
+#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_HYS)
+#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_HYS | PAD_CTL_PUE)
+#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
+#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \
+ PAD_CTL_SRE_FAST | PAD_CTL_DVS)
+#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST)
-#define MX51_PAD_CTRL_1 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_2 (PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_CTRL_4 (PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
+#define MX51_PAD_CTRL_2 (PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_CTRL_4 (PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
/*
* The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
* See also iomux-v3.h
*/
-/* PAD MUX ALT INPSE PATH PADCTRL */
-#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__GPIO_2_0 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, (4 | IOMUX_CONFIG_SION), \
- 0x09b4, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D17__GPIO_2_1 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__GPIO_2_2 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__GPIO_2_3 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, (4 | IOMUX_CONFIG_SION), \
- 0x09b0, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D20__GPIO_2_4 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO_2_5 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__GPIO_2_6 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__GPIO_2_7 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, 0x0, 0, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__GPIO_2_10 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__GPIO_2_11 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__GPIO_2_12 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__GPIO_2_13 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__GPIO_2_14 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__GPIO_2_15 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__GPIO_2_17 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__GPIO_2_18 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__GPIO_2_19 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__GPIO_2_20 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__GPIO_2_21 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0x0d4, 3, 0x0, 0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-#define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__FEC_RDAT1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x0, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__FEC_RDAT2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x0, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__FEC_RDAT3 IOMUX_PAD(0x480, 0x0ec, 3, 0x0, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x0, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x0, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0x0FC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__GPIO_3_3 IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__GPIO_3_4 IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__GPIO_3_5 IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__GPIO_3_6 IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__GPIO_3_7 IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x0, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__FEC_RXCLK IOMUX_PAD(0x504, 0x128, 1, 0x0, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB6__FEC_RDAT0 IOMUX_PAD(0x5DC, 0x134, 1, 0x0, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_RB7__FEC_TDAT0 IOMUX_PAD(0x5E0, 0x138, 1, 0x0, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__FEC_TDAT1 IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__FEC_TDAT2 IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__FEC_TDAT3 IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53C, 0x154, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__GPIO_3_29 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__GPIO_3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__GPIO_4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__GPIO_4_1 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__GPIO_4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__GPIO_4_3 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__GPIO_4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__GPIO_4_5 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__GPIO_4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__GPIO_4_7 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__GPIO_4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__GPIO_3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x000, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x000, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x000, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__GPIO_4_9 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__GPIO_4_10 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D14__GPIO_4_11 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D15__GPIO_4_12 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D16__GPIO_4_11 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D17__GPIO_4_12 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__GPIO_4_11 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__GPIO_4_12 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__GPIO_4_13 IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__GPIO_4_14 IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15 IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__GPIO_4_16 IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__GPIO_4_25 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, 0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, 0x0, 0, MX51_UART1_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, 0, 0x0, 0, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__GPIO_1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__GPIO_1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__GPIO_1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65C, 0x26C, 2, 0x9f0, 4, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65C, 0x26C, (3 | IOMUX_CONFIG_SION), \
- 0x09b8, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, 0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, (3 | IOMUX_CONFIG_SION), \
- 0x09bc, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO_1_27 IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__GPIO_1_19 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__GPIO_1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__GPIO_1_30 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__GPIO_1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 1, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \
- MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \
- 0x9b8, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__I2C2_SDA IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \
- 0x9bc, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
+/* Raw pin modes without pad control */
+/* PAD MUX ALT INPSE PATH PADCTRL */
+#define _MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x5c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x5c, 7, 0x08d8, 0, 0)
+#define _MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x5c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x5c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x5c, 0x14, 0x09b4, 0, 0)
+#define _MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x5c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x5c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x60, 7, 0x08d4, 0, 0)
+#define _MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x60, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x60, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x60, 3, 0x09ec, 0, 0)
+#define _MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x60, 4, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x60, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x64, 7, 0x08e4, 0, 0)
+#define _MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x64, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x64, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x64, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x64, 4, 0x09f0, 1, 0)
+#define _MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x64, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x68, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x68, 7, 0x08e8, 0, 0)
+#define _MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x68, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x68, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x68, 0x14, 0x09b0, 0, 0)
+#define _MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x68, 3, 0x09e8, 1, 0)
+#define _MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x68, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x6c, 5, 0x08c8, 0, 0)
+#define _MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x6c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x6c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x6c, 4, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x6c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x70, 5, 0x08c4, 0, 0)
+#define _MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x70, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x70, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x70, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x70, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x74, 5, 0x08cc, 0, 0)
+#define _MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x74, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x74, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x74, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x78, 5, 0x08d0, 0, 0)
+#define _MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x78, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x78, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x78, 4, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x78, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x7c, 5, 0x08f8, 0, 0)
+#define _MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x7c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x7c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x7c, 0x14, 0x09bc, 0, 0)
+#define _MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x7c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x7c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x80, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x80, 1, 0x09c8, 0, 0)
+#define _MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x80, 4, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x80, 3, 0x09f4, 0, 0)
+#define _MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x80, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x84, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x84, 1, 0x09cc, 0, 0)
+#define _MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x84, 4, 0x09e8, 3, 0)
+#define _MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x84, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x84, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x88, 5, 0x08f4, 0, 0)
+#define _MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x88, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x88, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x88, 0x14, 0x09b8, 0, 0)
+#define _MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x88, 3, 0x09f0, 3, 0)
+#define _MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x88, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x8c, 5, 0x08f0, 0, 0)
+#define _MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x8c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x8c, 1, 0x09d0, 0, 0)
+#define _MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x8c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x90, 5, 0x08ec, 0, 0)
+#define _MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x90, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x90, 1, 0x09d4, 0, 0)
+#define _MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x90, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x94, 5, 0x08fc, 0, 0)
+#define _MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x94, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x94, 1, 0x09d8, 0, 0)
+#define _MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x94, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x98, 5, 0x0900, 0, 0)
+#define _MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x98, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x98, 1, 0x09dc, 0, 0)
+#define _MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x98, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x9c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x9c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x9c, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0xa0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0xa0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0xa0, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0xa4, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0xa4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0xa4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0xa8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0xa8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0xa8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0xac, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0xac, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0xac, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0xb0, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0xb0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0xb0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0xb4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0xb4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0xb8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0xb8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0xb8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0xbc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0xbc, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0xbc, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0xc0, 6, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0xc0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0xc0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0xc0, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0xc4, 5, 0x09a0, 0, 0)
+#define _MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0xc4, 6, 0x0908, 0, 0)
+#define _MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0xc4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0xc4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0xc4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0xc8, 5, 0x099c, 0, 0)
+#define _MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0xc8, 6, 0x09a4, 0, 0)
+#define _MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0xc8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0xc8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0xc8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0xcc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0xd0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0xd4, 6, 0x08e0, 0, 0)
+#define _MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0xd4, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0xd4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0xd4, 3, 0x0954, 0, 0)
+#define _MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0xd4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0xd4, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0xd8, 6, 0x08dc, 0, 0)
+#define _MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0xd8, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0xd8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0xd8, 3, 0x095c, 0, 0)
+#define _MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0xd8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0xd8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0xdc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0xdc, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0xe0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0xe0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0xe4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0xe4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0xe8, 6, 0x08d8, 1, 0)
+#define _MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0xe8, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0xe8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0xe8, 3, 0x0960, 0, 0)
+#define _MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0xe8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0xe8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0xec, 6, 0x08d4, 1, 0)
+#define _MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0xec, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0xec, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0xec, 3, 0x0964, 0, 0)
+#define _MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0xec, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0xec, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0xf0, 6, 0x08e4, 1, 0)
+#define _MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0xf0, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0xf0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0xf0, 3, 0x0970, 0, 0)
+#define _MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0xf0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0xf0, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0xf4, 6, 0x08e8, 1, 0)
+#define _MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0xf4, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0xf4, 4, 0x0904, 0, 0)
+#define _MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0xf4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0xf4, 3, 0x0950, 0, 0)
+#define _MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0xf4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0xf4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0xf8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0xf8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0xfc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0xfc, 1, 0x0978, 0, 0)
+#define _MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x097c, 0, 0)
+#define _MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x0980, 0, 0)
+#define _MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x093c, 0, 0)
+#define _MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x0984, 0, 0)
+#define _MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x0940, 0, 0)
+#define _MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x0988, 0, 0)
+#define _MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x098c, 0, 0)
+#define _MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x0990, 0, 0)
+#define _MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x0944, 0, 0)
+#define _MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x0930, 0, 0)
+#define _MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x0994, 0, 0)
+#define _MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x0948, 0, 0)
+#define _MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x091c, 0, 0)
+#define _MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x09a8, 0, 0)
+#define _MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x094c, 0, 0)
+#define _MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0x0a20, 0, 0)
+#define _MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x0968, 0, 0)
+#define _MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x09f8, 0, 0)
+#define _MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x0998, 0, 0)
+#define _MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x0914, 0, 0)
+#define _MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0x0a24, 0, 0)
+#define _MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0x0a1c, 0, 0)
+#define _MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x0928, 0, 0)
+#define _MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0974, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x0938, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x0934, 0, 0)
+#define _MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x0930, 1, 0)
+#define _MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x096c, 0, 0)
+#define _MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x0948, 1, 0)
+#define _MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x0944, 1, 0)
+#define _MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x0958, 0, 0)
+#define _MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x0940, 1, 0)
+#define _MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x093c, 1, 0)
+#define _MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x09fc, 0, 0)
+#define _MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0x0a00, 0, 0)
+#define _MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0x0a04, 0, 0)
+#define _MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0x0a08, 0, 0)
+#define _MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0x0a0c, 0, 0)
+#define _MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0x0a10, 0, 0)
+#define _MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0x0a14, 0, 0)
+#define _MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0x0a18, 0, 0)
+#define _MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x0998, 1, 0)
+#define _MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, 0x000, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, 0x000, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, 0x0000, 0, 0)
+#define _MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x09f4, 2, 0)
+#define _MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x09b4, 1, 0)
+#define _MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x08c4, 1, 0)
+#define _MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x08cc, 1, 0)
+#define _MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x08c8, 1, 0)
+#define _MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x08d0, 1, 0)
+#define _MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x09b0, 1, 0)
+#define _MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x09e4, 0, 0)
+#define _MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x09e0, 0, 0)
+#define _MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0)
+#define _MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, 0x09ec, 3, 0)
+#define _MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x09f4, 4, 0)
+#define _MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, 0x0000, 0, 0)
+#define _MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0000, 0, 0)
+#define _MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, 0x0000, 0, 0)
+#define _MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x090c, 0, 0)
+#define _MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x0910, 0, 0)
+#define _MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x09b8, 1, 0)
+#define _MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x09f0, 4, 0)
+#define _MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x09bc, 1, 0)
+#define _MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x0914, 1, 0)
+#define _MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x09b8, 2, 0)
+#define _MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x091c, 1, 0)
+#define _MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x09bc, 2, 0)
+#define _MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x09f4, 6, 0)
+#define _MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x0918, 0, 0)
+#define _MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0)
+#define _MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0)
+#define _MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0)
+#define _MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x0920, 0, 0)
+#define _MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x0928, 1, 0)
+#define _MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x0934, 1, 0)
+#define _MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x0978, 1, 0)
+#define _MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x097c, 1, 0)
+#define _MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x0980, 1, 0)
+#define _MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x0984, 1, 0)
+#define _MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x09a4, 1, 0)
+#define _MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x09c4, 0, 0)
+#define _MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x0988, 1, 0)
+#define _MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x09c4, 1, 0)
+#define _MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x098c, 1, 0)
+#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x0990, 1, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x0994, 1, 0)
+#define _MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x09a8, 1, 0)
+#define _MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x09a0, 1, 0)
+#define _MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x09c0, 0, 0)
+#define _MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x099c, 1, 0)
+#define _MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x0950, 1, 0)
+#define _MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x0954, 1, 0)
+#define _MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x095c, 1, 0)
+#define _MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x09c0, 1, 0)
+#define _MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x0960, 1, 0)
+#define _MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x0964, 1, 0)
+#define _MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x09c8, 1, 0)
+#define _MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x09f4, 8, 0)
+#define _MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x09f8, 1, 0)
+#define _MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x0970, 1, 0)
+#define _MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x09cc, 1, 0)
+#define _MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0x0a1c, 1, 0)
+#define _MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x09d0, 1, 0)
+#define _MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0x0a24, 1, 0)
+#define _MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x09d4, 1, 0)
+#define _MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0x0a20, 1, 0)
+#define _MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x09d8, 1, 0)
+#define _MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x09fc, 1, 0)
+#define _MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x08f4, 1, 0)
+#define _MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0x0a00, 1, 0)
+#define _MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x094c, 1, 0)
+#define _MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x09dc, 1, 0)
+#define _MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0x0a04, 1, 0)
+#define _MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x08f0, 1, 0)
+#define _MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x0968, 1, 0)
+#define _MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0x0a08, 1, 0)
+#define _MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x08ec, 1, 0)
+#define _MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x096c, 1, 0)
+#define _MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0x0a0c, 1, 0)
+#define _MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x08fc, 1, 0)
+#define _MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x0974, 1, 0)
+#define _MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0x0a10, 1, 0)
+#define _MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x0900, 1, 0)
+#define _MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x0958, 1, 0)
+#define _MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0x0a14, 1, 0)
+#define _MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x08f8, 1, 0)
+#define _MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0x0a18, 1, 0)
+#define _MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x08e0, 1, 0)
+#define _MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x091c, 2, 0)
+#define _MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x08dc, 1, 0)
+#define _MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x0914, 2, 0)
+#define _MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x08d8, 2, 0)
+#define _MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x0918, 1, 0)
+#define _MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x000, 0x01c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x000, 0x020, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x000, 0x024, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x000, 0x028, 0, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x08d4, 2, 0)
+#define _MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x000, 0x02c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x000, 0x030, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x000, 0x034, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x000, 0x038, 0, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x08e4, 2, 0)
+#define _MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x000, 0x044, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x000, 0x048, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x000, 0x03c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x000, 0x040, 0, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x08e8, 2, 0)
+#define _MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x0920, 1, 0)
+#define _MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x0924, 0, 0)
+#define _MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x0918, 2, 0)
+#define _MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x000, 0x04c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x000, 0x050, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x000, 0x054, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x000, 0x058, 0, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x000, 0x3b4, 2, 0x091c, 3, 0)
+#define _MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x09b0, 2, 0)
+#define _MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x0914, 3, 0)
+#define _MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x09b4, 2, 0)
+#define _MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x0918, 3, 0)
+#define _MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x0924, 1, 0)
+#define _MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x09b8, 3, 0)
+#define _MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x090c, 1, 0)
+#define _MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x09bc, 3, 0)
+#define _MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x0910, 1, 0)
+#define _MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x0908, 1, 0)
+#define _MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x0938, 1, 0)
+#define _MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x099c, 2, 0)
+#define _MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, 0x0000, 0, 0)
+
+/* The same pins as above but with the default pad control values applied */
+#define MX51_PAD_EIM_D16__AUD4_RXFS (_MX51_PAD_EIM_D16__AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D16__AUD5_TXD (_MX51_PAD_EIM_D16__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D16__EIM_D16 (_MX51_PAD_EIM_D16__EIM_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D16__GPIO2_0 (_MX51_PAD_EIM_D16__GPIO2_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D16__I2C1_SDA (_MX51_PAD_EIM_D16__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_EIM_D16__UART2_CTS (_MX51_PAD_EIM_D16__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D16__USBH2_DATA0 (_MX51_PAD_EIM_D16__USBH2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D17__AUD5_RXD (_MX51_PAD_EIM_D17__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D17__EIM_D17 (_MX51_PAD_EIM_D17__EIM_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D17__GPIO2_1 (_MX51_PAD_EIM_D17__GPIO2_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D17__UART2_RXD (_MX51_PAD_EIM_D17__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D17__UART3_CTS (_MX51_PAD_EIM_D17__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D17__USBH2_DATA1 (_MX51_PAD_EIM_D17__USBH2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D18__AUD5_TXC (_MX51_PAD_EIM_D18__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D18__EIM_D18 (_MX51_PAD_EIM_D18__EIM_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D18__GPIO2_2 (_MX51_PAD_EIM_D18__GPIO2_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D18__UART2_TXD (_MX51_PAD_EIM_D18__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D18__UART3_RTS (_MX51_PAD_EIM_D18__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D18__USBH2_DATA2 (_MX51_PAD_EIM_D18__USBH2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__AUD4_RXC (_MX51_PAD_EIM_D19__AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__AUD5_TXFS (_MX51_PAD_EIM_D19__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__EIM_D19 (_MX51_PAD_EIM_D19__EIM_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__GPIO2_3 (_MX51_PAD_EIM_D19__GPIO2_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__I2C1_SCL (_MX51_PAD_EIM_D19__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_EIM_D19__UART2_RTS (_MX51_PAD_EIM_D19__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D19__USBH2_DATA3 (_MX51_PAD_EIM_D19__USBH2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__AUD4_TXD (_MX51_PAD_EIM_D20__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__EIM_D20 (_MX51_PAD_EIM_D20__EIM_D20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__GPIO2_4 (_MX51_PAD_EIM_D20__GPIO2_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB (_MX51_PAD_EIM_D20__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__USBH2_DATA4 (_MX51_PAD_EIM_D20__USBH2_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__AUD4_RXD (_MX51_PAD_EIM_D21__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__EIM_D21 (_MX51_PAD_EIM_D21__EIM_D21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__GPIO2_5 (_MX51_PAD_EIM_D21__GPIO2_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB (_MX51_PAD_EIM_D21__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__USBH2_DATA5 (_MX51_PAD_EIM_D21__USBH2_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D22__AUD4_TXC (_MX51_PAD_EIM_D22__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D22__EIM_D22 (_MX51_PAD_EIM_D22__EIM_D22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D22__GPIO2_6 (_MX51_PAD_EIM_D22__GPIO2_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D22__USBH2_DATA6 (_MX51_PAD_EIM_D22__USBH2_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__AUD4_TXFS (_MX51_PAD_EIM_D23__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__EIM_D23 (_MX51_PAD_EIM_D23__EIM_D23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__GPIO2_7 (_MX51_PAD_EIM_D23__GPIO2_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__SPDIF_OUT1 (_MX51_PAD_EIM_D23__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__USBH2_DATA7 (_MX51_PAD_EIM_D23__USBH2_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D24__AUD6_RXFS (_MX51_PAD_EIM_D24__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D24__EIM_D24 (_MX51_PAD_EIM_D24__EIM_D24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D24__GPIO2_8 (_MX51_PAD_EIM_D24__GPIO2_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D24__I2C2_SDA (_MX51_PAD_EIM_D24__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_EIM_D24__UART3_CTS (_MX51_PAD_EIM_D24__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D24__USBOTG_DATA0 (_MX51_PAD_EIM_D24__USBOTG_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D25__EIM_D25 (_MX51_PAD_EIM_D25__EIM_D25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D25__KEY_COL6 (_MX51_PAD_EIM_D25__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D25__UART2_CTS (_MX51_PAD_EIM_D25__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D25__UART3_RXD (_MX51_PAD_EIM_D25__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D25__USBOTG_DATA1 (_MX51_PAD_EIM_D25__USBOTG_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D26__EIM_D26 (_MX51_PAD_EIM_D26__EIM_D26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D26__KEY_COL7 (_MX51_PAD_EIM_D26__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D26__UART2_RTS (_MX51_PAD_EIM_D26__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D26__UART3_TXD (_MX51_PAD_EIM_D26__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D26__USBOTG_DATA2 (_MX51_PAD_EIM_D26__USBOTG_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D27__AUD6_RXC (_MX51_PAD_EIM_D27__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D27__EIM_D27 (_MX51_PAD_EIM_D27__EIM_D27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D27__GPIO2_9 (_MX51_PAD_EIM_D27__GPIO2_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D27__I2C2_SCL (_MX51_PAD_EIM_D27__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_EIM_D27__UART3_RTS (_MX51_PAD_EIM_D27__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D27__USBOTG_DATA3 (_MX51_PAD_EIM_D27__USBOTG_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D28__AUD6_TXD (_MX51_PAD_EIM_D28__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D28__EIM_D28 (_MX51_PAD_EIM_D28__EIM_D28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D28__KEY_ROW4 (_MX51_PAD_EIM_D28__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D28__USBOTG_DATA4 (_MX51_PAD_EIM_D28__USBOTG_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D29__AUD6_RXD (_MX51_PAD_EIM_D29__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D29__EIM_D29 (_MX51_PAD_EIM_D29__EIM_D29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D29__KEY_ROW5 (_MX51_PAD_EIM_D29__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D29__USBOTG_DATA5 (_MX51_PAD_EIM_D29__USBOTG_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D30__AUD6_TXC (_MX51_PAD_EIM_D30__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D30__EIM_D30 (_MX51_PAD_EIM_D30__EIM_D30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D30__KEY_ROW6 (_MX51_PAD_EIM_D30__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D30__USBOTG_DATA6 (_MX51_PAD_EIM_D30__USBOTG_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D31__AUD6_TXFS (_MX51_PAD_EIM_D31__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D31__EIM_D31 (_MX51_PAD_EIM_D31__EIM_D31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D31__KEY_ROW7 (_MX51_PAD_EIM_D31__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D31__USBOTG_DATA7 (_MX51_PAD_EIM_D31__USBOTG_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A16__EIM_A16 (_MX51_PAD_EIM_A16__EIM_A16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A16__GPIO2_10 (_MX51_PAD_EIM_A16__GPIO2_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 (_MX51_PAD_EIM_A16__OSC_FREQ_SEL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A17__EIM_A17 (_MX51_PAD_EIM_A17__EIM_A17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A17__GPIO2_11 (_MX51_PAD_EIM_A17__GPIO2_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 (_MX51_PAD_EIM_A17__OSC_FREQ_SEL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A18__BOOT_LPB0 (_MX51_PAD_EIM_A18__BOOT_LPB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A18__EIM_A18 (_MX51_PAD_EIM_A18__EIM_A18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A18__GPIO2_12 (_MX51_PAD_EIM_A18__GPIO2_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A19__BOOT_LPB1 (_MX51_PAD_EIM_A19__BOOT_LPB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A19__EIM_A19 (_MX51_PAD_EIM_A19__EIM_A19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A19__GPIO2_13 (_MX51_PAD_EIM_A19__GPIO2_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 (_MX51_PAD_EIM_A20__BOOT_UART_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A20__EIM_A20 (_MX51_PAD_EIM_A20__EIM_A20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A20__GPIO2_14 (_MX51_PAD_EIM_A20__GPIO2_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 (_MX51_PAD_EIM_A21__BOOT_UART_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A21__EIM_A21 (_MX51_PAD_EIM_A21__EIM_A21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A21__GPIO2_15 (_MX51_PAD_EIM_A21__GPIO2_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A22__EIM_A22 (_MX51_PAD_EIM_A22__EIM_A22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A22__GPIO2_16 (_MX51_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A23__BOOT_HPN_EN (_MX51_PAD_EIM_A23__BOOT_HPN_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A23__EIM_A23 (_MX51_PAD_EIM_A23__EIM_A23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A23__GPIO2_17 (_MX51_PAD_EIM_A23__GPIO2_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A24__EIM_A24 (_MX51_PAD_EIM_A24__EIM_A24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A24__GPIO2_18 (_MX51_PAD_EIM_A24__GPIO2_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A24__USBH2_CLK (_MX51_PAD_EIM_A24__USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A25__DISP1_PIN4 (_MX51_PAD_EIM_A25__DISP1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A25__EIM_A25 (_MX51_PAD_EIM_A25__EIM_A25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A25__GPIO2_19 (_MX51_PAD_EIM_A25__GPIO2_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A25__USBH2_DIR (_MX51_PAD_EIM_A25__USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__CSI1_DATA_EN (_MX51_PAD_EIM_A26__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__DISP2_EXT_CLK (_MX51_PAD_EIM_A26__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__EIM_A26 (_MX51_PAD_EIM_A26__EIM_A26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__GPIO2_20 (_MX51_PAD_EIM_A26__GPIO2_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__USBH2_STP (_MX51_PAD_EIM_A26__USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__CSI2_DATA_EN (_MX51_PAD_EIM_A27__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__DISP1_PIN1 (_MX51_PAD_EIM_A27__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__EIM_A27 (_MX51_PAD_EIM_A27__EIM_A27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__GPIO2_21 (_MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__USBH2_NXT (_MX51_PAD_EIM_A27__USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB0__EIM_EB0 (_MX51_PAD_EIM_EB0__EIM_EB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB1__EIM_EB1 (_MX51_PAD_EIM_EB1__EIM_EB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__AUD5_RXFS (_MX51_PAD_EIM_EB2__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__CSI1_D2 (_MX51_PAD_EIM_EB2__CSI1_D2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__EIM_EB2 (_MX51_PAD_EIM_EB2__EIM_EB2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__FEC_MDIO (_MX51_PAD_EIM_EB2__FEC_MDIO | \
+ MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS))
+#define MX51_PAD_EIM_EB2__GPIO2_22 (_MX51_PAD_EIM_EB2__GPIO2_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 (_MX51_PAD_EIM_EB2__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__AUD5_RXC (_MX51_PAD_EIM_EB3__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__CSI1_D3 (_MX51_PAD_EIM_EB3__CSI1_D3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__EIM_EB3 (_MX51_PAD_EIM_EB3__EIM_EB3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__FEC_RDATA1 (_MX51_PAD_EIM_EB3__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__GPIO2_23 (_MX51_PAD_EIM_EB3__GPIO2_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 (_MX51_PAD_EIM_EB3__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_OE__EIM_OE (_MX51_PAD_EIM_OE__EIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_OE__GPIO2_24 (_MX51_PAD_EIM_OE__GPIO2_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS0__EIM_CS0 (_MX51_PAD_EIM_CS0__EIM_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS0__GPIO2_25 (_MX51_PAD_EIM_CS0__GPIO2_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS1__EIM_CS1 (_MX51_PAD_EIM_CS1__EIM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS1__GPIO2_26 (_MX51_PAD_EIM_CS1__GPIO2_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__AUD5_TXD (_MX51_PAD_EIM_CS2__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__CSI1_D4 (_MX51_PAD_EIM_CS2__CSI1_D4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__EIM_CS2 (_MX51_PAD_EIM_CS2__EIM_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__FEC_RDATA2 (_MX51_PAD_EIM_CS2__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__GPIO2_27 (_MX51_PAD_EIM_CS2__GPIO2_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__USBOTG_STP (_MX51_PAD_EIM_CS2__USBOTG_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__AUD5_RXD (_MX51_PAD_EIM_CS3__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__CSI1_D5 (_MX51_PAD_EIM_CS3__CSI1_D5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__EIM_CS3 (_MX51_PAD_EIM_CS3__EIM_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__FEC_RDATA3 (_MX51_PAD_EIM_CS3__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__GPIO2_28 (_MX51_PAD_EIM_CS3__GPIO2_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__USBOTG_NXT (_MX51_PAD_EIM_CS3__USBOTG_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__AUD5_TXC (_MX51_PAD_EIM_CS4__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__CSI1_D6 (_MX51_PAD_EIM_CS4__CSI1_D6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__EIM_CS4 (_MX51_PAD_EIM_CS4__EIM_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__FEC_RX_ER (_MX51_PAD_EIM_CS4__FEC_RX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
+#define MX51_PAD_EIM_CS4__GPIO2_29 (_MX51_PAD_EIM_CS4__GPIO2_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__USBOTG_CLK (_MX51_PAD_EIM_CS4__USBOTG_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__AUD5_TXFS (_MX51_PAD_EIM_CS5__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__CSI1_D7 (_MX51_PAD_EIM_CS5__CSI1_D7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK (_MX51_PAD_EIM_CS5__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__EIM_CS5 (_MX51_PAD_EIM_CS5__EIM_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__FEC_CRS (_MX51_PAD_EIM_CS5__FEC_CRS | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
+#define MX51_PAD_EIM_CS5__GPIO2_30 (_MX51_PAD_EIM_CS5__GPIO2_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__USBOTG_DIR (_MX51_PAD_EIM_CS5__USBOTG_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DTACK__EIM_DTACK (_MX51_PAD_EIM_DTACK__EIM_DTACK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DTACK__GPIO2_31 (_MX51_PAD_EIM_DTACK__GPIO2_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_LBA__EIM_LBA (_MX51_PAD_EIM_LBA__EIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_LBA__GPIO3_1 (_MX51_PAD_EIM_LBA__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CRE__EIM_CRE (_MX51_PAD_EIM_CRE__EIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CRE__GPIO3_2 (_MX51_PAD_EIM_CRE__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DRAM_CS1__DRAM_CS1 (_MX51_PAD_DRAM_CS1__DRAM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__GPIO3_3 (_MX51_PAD_NANDF_WE_B__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__NANDF_WE_B (_MX51_PAD_NANDF_WE_B__NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__PATA_DIOW (_MX51_PAD_NANDF_WE_B__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__SD3_DATA0 (_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__GPIO3_4 (_MX51_PAD_NANDF_RE_B__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__NANDF_RE_B (_MX51_PAD_NANDF_RE_B__NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__PATA_DIOR (_MX51_PAD_NANDF_RE_B__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__SD3_DATA1 (_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_ALE__GPIO3_5 (_MX51_PAD_NANDF_ALE__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_ALE__NANDF_ALE (_MX51_PAD_NANDF_ALE__NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN (_MX51_PAD_NANDF_ALE__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CLE__GPIO3_6 (_MX51_PAD_NANDF_CLE__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CLE__NANDF_CLE (_MX51_PAD_NANDF_CLE__NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CLE__PATA_RESET_B (_MX51_PAD_NANDF_CLE__PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__GPIO3_7 (_MX51_PAD_NANDF_WP_B__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__NANDF_WP_B (_MX51_PAD_NANDF_WP_B__NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__PATA_DMACK (_MX51_PAD_NANDF_WP_B__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__SD3_DATA2 (_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 (_MX51_PAD_NANDF_RB0__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__GPIO3_8 (_MX51_PAD_NANDF_RB0__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__NANDF_RB0 (_MX51_PAD_NANDF_RB0__NANDF_RB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__PATA_DMARQ (_MX51_PAD_NANDF_RB0__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__SD3_DATA3 (_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__CSPI_MOSI (_MX51_PAD_NANDF_RB1__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__ECSPI2_RDY (_MX51_PAD_NANDF_RB1__ECSPI2_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__GPIO3_9 (_MX51_PAD_NANDF_RB1__GPIO3_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__NANDF_RB1 (_MX51_PAD_NANDF_RB1__NANDF_RB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__PATA_IORDY (_MX51_PAD_NANDF_RB1__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__SD4_CMD (_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__DISP2_WAIT (_MX51_PAD_NANDF_RB2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK (_MX51_PAD_NANDF_RB2__ECSPI2_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__FEC_COL (_MX51_PAD_NANDF_RB2__FEC_COL | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
+#define MX51_PAD_NANDF_RB2__GPIO3_10 (_MX51_PAD_NANDF_RB2__GPIO3_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__NANDF_RB2 (_MX51_PAD_NANDF_RB2__NANDF_RB2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP (_MX51_PAD_NANDF_RB2__USBH3_H3_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__USBH3_NXT (_MX51_PAD_NANDF_RB2__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__DISP1_WAIT (_MX51_PAD_NANDF_RB3__DISP1_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO (_MX51_PAD_NANDF_RB3__ECSPI2_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__FEC_RX_CLK (_MX51_PAD_NANDF_RB3__FEC_RX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
+#define MX51_PAD_NANDF_RB3__GPIO3_11 (_MX51_PAD_NANDF_RB3__GPIO3_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__NANDF_RB3 (_MX51_PAD_NANDF_RB3__NANDF_RB3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__USBH3_CLK (_MX51_PAD_NANDF_RB3__USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM (_MX51_PAD_NANDF_RB3__USBH3_H3_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO_NAND__GPIO_NAND (_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_GPIO_NAND__PATA_INTRQ (_MX51_PAD_GPIO_NAND__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS0__GPIO3_16 (_MX51_PAD_NANDF_CS0__GPIO3_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS0__NANDF_CS0 (_MX51_PAD_NANDF_CS0__NANDF_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS1__GPIO3_17 (_MX51_PAD_NANDF_CS1__GPIO3_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS1__NANDF_CS1 (_MX51_PAD_NANDF_CS1__NANDF_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__CSPI_SCLK (_MX51_PAD_NANDF_CS2__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER (_MX51_PAD_NANDF_CS2__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS2__GPIO3_18 (_MX51_PAD_NANDF_CS2__GPIO3_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__NANDF_CS2 (_MX51_PAD_NANDF_CS2__NANDF_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__PATA_CS_0 (_MX51_PAD_NANDF_CS2__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__SD4_CLK (_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP (_MX51_PAD_NANDF_CS2__USBH3_H1_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__FEC_MDC (_MX51_PAD_NANDF_CS3__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS3__GPIO3_19 (_MX51_PAD_NANDF_CS3__GPIO3_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__NANDF_CS3 (_MX51_PAD_NANDF_CS3__NANDF_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__PATA_CS_1 (_MX51_PAD_NANDF_CS3__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__SD4_DAT0 (_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM (_MX51_PAD_NANDF_CS3__USBH3_H1_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__FEC_TDATA1 (_MX51_PAD_NANDF_CS4__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS4__GPIO3_20 (_MX51_PAD_NANDF_CS4__GPIO3_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__NANDF_CS4 (_MX51_PAD_NANDF_CS4__NANDF_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__PATA_DA_0 (_MX51_PAD_NANDF_CS4__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__SD4_DAT1 (_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__USBH3_STP (_MX51_PAD_NANDF_CS4__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__FEC_TDATA2 (_MX51_PAD_NANDF_CS5__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS5__GPIO3_21 (_MX51_PAD_NANDF_CS5__GPIO3_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__NANDF_CS5 (_MX51_PAD_NANDF_CS5__NANDF_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__PATA_DA_1 (_MX51_PAD_NANDF_CS5__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__SD4_DAT2 (_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__USBH3_DIR (_MX51_PAD_NANDF_CS5__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__CSPI_SS3 (_MX51_PAD_NANDF_CS6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__FEC_TDATA3 (_MX51_PAD_NANDF_CS6__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS6__GPIO3_22 (_MX51_PAD_NANDF_CS6__GPIO3_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__NANDF_CS6 (_MX51_PAD_NANDF_CS6__NANDF_CS6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__PATA_DA_2 (_MX51_PAD_NANDF_CS6__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__SD4_DAT3 (_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN (_MX51_PAD_NANDF_CS7__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS7__GPIO3_23 (_MX51_PAD_NANDF_CS7__GPIO3_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS7__NANDF_CS7 (_MX51_PAD_NANDF_CS7__NANDF_CS7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS7__SD3_CLK (_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 (_MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK (_MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
+#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 (_MX51_PAD_NANDF_RDY_INT__GPIO3_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT (_MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD (_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI (_MX51_PAD_NANDF_D15__ECSPI2_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__GPIO3_25 (_MX51_PAD_NANDF_D15__GPIO3_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__NANDF_D15 (_MX51_PAD_NANDF_D15__NANDF_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__PATA_DATA15 (_MX51_PAD_NANDF_D15__PATA_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__SD3_DAT7 (_MX51_PAD_NANDF_D15__SD3_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__ECSPI2_SS3 (_MX51_PAD_NANDF_D14__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__GPIO3_26 (_MX51_PAD_NANDF_D14__GPIO3_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__NANDF_D14 (_MX51_PAD_NANDF_D14__NANDF_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__PATA_DATA14 (_MX51_PAD_NANDF_D14__PATA_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__SD3_DAT6 (_MX51_PAD_NANDF_D14__SD3_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__ECSPI2_SS2 (_MX51_PAD_NANDF_D13__ECSPI2_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__GPIO3_27 (_MX51_PAD_NANDF_D13__GPIO3_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__NANDF_D13 (_MX51_PAD_NANDF_D13__NANDF_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__PATA_DATA13 (_MX51_PAD_NANDF_D13__PATA_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__SD3_DAT5 (_MX51_PAD_NANDF_D13__SD3_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__ECSPI2_SS1 (_MX51_PAD_NANDF_D12__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__GPIO3_28 (_MX51_PAD_NANDF_D12__GPIO3_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__NANDF_D12 (_MX51_PAD_NANDF_D12__NANDF_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__PATA_DATA12 (_MX51_PAD_NANDF_D12__PATA_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__SD3_DAT4 (_MX51_PAD_NANDF_D12__SD3_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__FEC_RX_DV (_MX51_PAD_NANDF_D11__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__GPIO3_29 (_MX51_PAD_NANDF_D11__GPIO3_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__NANDF_D11 (_MX51_PAD_NANDF_D11__NANDF_D11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__PATA_DATA11 (_MX51_PAD_NANDF_D11__PATA_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__SD3_DATA3 (_MX51_PAD_NANDF_D11__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D10__GPIO3_30 (_MX51_PAD_NANDF_D10__GPIO3_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D10__NANDF_D10 (_MX51_PAD_NANDF_D10__NANDF_D10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D10__PATA_DATA10 (_MX51_PAD_NANDF_D10__PATA_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D10__SD3_DATA2 (_MX51_PAD_NANDF_D10__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D9__FEC_RDATA0 (_MX51_PAD_NANDF_D9__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
+#define MX51_PAD_NANDF_D9__GPIO3_31 (_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D9__NANDF_D9 (_MX51_PAD_NANDF_D9__NANDF_D9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D9__PATA_DATA9 (_MX51_PAD_NANDF_D9__PATA_DATA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D9__SD3_DATA1 (_MX51_PAD_NANDF_D9__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D8__FEC_TDATA0 (_MX51_PAD_NANDF_D8__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_D8__GPIO4_0 (_MX51_PAD_NANDF_D8__GPIO4_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D8__NANDF_D8 (_MX51_PAD_NANDF_D8__NANDF_D8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D8__PATA_DATA8 (_MX51_PAD_NANDF_D8__PATA_DATA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D8__SD3_DATA0 (_MX51_PAD_NANDF_D8__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D7__GPIO4_1 (_MX51_PAD_NANDF_D7__GPIO4_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D7__NANDF_D7 (_MX51_PAD_NANDF_D7__NANDF_D7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D7__PATA_DATA7 (_MX51_PAD_NANDF_D7__PATA_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D7__USBH3_DATA0 (_MX51_PAD_NANDF_D7__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__GPIO4_2 (_MX51_PAD_NANDF_D6__GPIO4_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__NANDF_D6 (_MX51_PAD_NANDF_D6__NANDF_D6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__PATA_DATA6 (_MX51_PAD_NANDF_D6__PATA_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__SD4_LCTL (_MX51_PAD_NANDF_D6__SD4_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__USBH3_DATA1 (_MX51_PAD_NANDF_D6__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__GPIO4_3 (_MX51_PAD_NANDF_D5__GPIO4_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__NANDF_D5 (_MX51_PAD_NANDF_D5__NANDF_D5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__PATA_DATA5 (_MX51_PAD_NANDF_D5__PATA_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__SD4_WP (_MX51_PAD_NANDF_D5__SD4_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__USBH3_DATA2 (_MX51_PAD_NANDF_D5__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__GPIO4_4 (_MX51_PAD_NANDF_D4__GPIO4_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__NANDF_D4 (_MX51_PAD_NANDF_D4__NANDF_D4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__PATA_DATA4 (_MX51_PAD_NANDF_D4__PATA_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__SD4_CD (_MX51_PAD_NANDF_D4__SD4_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__USBH3_DATA3 (_MX51_PAD_NANDF_D4__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__GPIO4_5 (_MX51_PAD_NANDF_D3__GPIO4_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__NANDF_D3 (_MX51_PAD_NANDF_D3__NANDF_D3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__PATA_DATA3 (_MX51_PAD_NANDF_D3__PATA_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__SD4_DAT4 (_MX51_PAD_NANDF_D3__SD4_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__USBH3_DATA4 (_MX51_PAD_NANDF_D3__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__GPIO4_6 (_MX51_PAD_NANDF_D2__GPIO4_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__NANDF_D2 (_MX51_PAD_NANDF_D2__NANDF_D2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__PATA_DATA2 (_MX51_PAD_NANDF_D2__PATA_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__SD4_DAT5 (_MX51_PAD_NANDF_D2__SD4_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__USBH3_DATA5 (_MX51_PAD_NANDF_D2__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__GPIO4_7 (_MX51_PAD_NANDF_D1__GPIO4_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__NANDF_D1 (_MX51_PAD_NANDF_D1__NANDF_D1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__PATA_DATA1 (_MX51_PAD_NANDF_D1__PATA_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__SD4_DAT6 (_MX51_PAD_NANDF_D1__SD4_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__USBH3_DATA6 (_MX51_PAD_NANDF_D1__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__GPIO4_8 (_MX51_PAD_NANDF_D0__GPIO4_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__NANDF_D0 (_MX51_PAD_NANDF_D0__NANDF_D0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__PATA_DATA0 (_MX51_PAD_NANDF_D0__PATA_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__SD4_DAT7 (_MX51_PAD_NANDF_D0__SD4_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__USBH3_DATA7 (_MX51_PAD_NANDF_D0__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D8__CSI1_D8 (_MX51_PAD_CSI1_D8__CSI1_D8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D8__GPIO3_12 (_MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI1_D9__CSI1_D9 (_MX51_PAD_CSI1_D9__CSI1_D9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D9__GPIO3_13 (_MX51_PAD_CSI1_D9__GPIO3_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI1_D10__CSI1_D10 (_MX51_PAD_CSI1_D10__CSI1_D10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D11__CSI1_D11 (_MX51_PAD_CSI1_D11__CSI1_D11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D12__CSI1_D12 (_MX51_PAD_CSI1_D12__CSI1_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D13__CSI1_D13 (_MX51_PAD_CSI1_D13__CSI1_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D14__CSI1_D14 (_MX51_PAD_CSI1_D14__CSI1_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D15__CSI1_D15 (_MX51_PAD_CSI1_D15__CSI1_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D16__CSI1_D16 (_MX51_PAD_CSI1_D16__CSI1_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D17__CSI1_D17 (_MX51_PAD_CSI1_D17__CSI1_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D18__CSI1_D18 (_MX51_PAD_CSI1_D18__CSI1_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D19__CSI1_D19 (_MX51_PAD_CSI1_D19__CSI1_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC (_MX51_PAD_CSI1_VSYNC__CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_VSYNC__GPIO3_14 (_MX51_PAD_CSI1_VSYNC__GPIO3_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC (_MX51_PAD_CSI1_HSYNC__CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_HSYNC__GPIO3_15 (_MX51_PAD_CSI1_HSYNC__GPIO3_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK (_MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK (_MX51_PAD_CSI1_MCLK__CSI1_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D12__CSI2_D12 (_MX51_PAD_CSI2_D12__CSI2_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D12__GPIO4_9 (_MX51_PAD_CSI2_D12__GPIO4_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_D13__CSI2_D13 (_MX51_PAD_CSI2_D13__CSI2_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D13__GPIO4_10 (_MX51_PAD_CSI2_D13__GPIO4_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_D14__CSI2_D14 (_MX51_PAD_CSI2_D14__CSI2_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D15__CSI2_D15 (_MX51_PAD_CSI2_D15__CSI2_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D16__CSI2_D16 (_MX51_PAD_CSI2_D16__CSI2_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D17__CSI2_D17 (_MX51_PAD_CSI2_D17__CSI2_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D18__CSI2_D18 (_MX51_PAD_CSI2_D18__CSI2_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D18__GPIO4_11 (_MX51_PAD_CSI2_D18__GPIO4_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_D19__CSI2_D19 (_MX51_PAD_CSI2_D19__CSI2_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D19__GPIO4_12 (_MX51_PAD_CSI2_D19__GPIO4_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC (_MX51_PAD_CSI2_VSYNC__CSI2_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_VSYNC__GPIO4_13 (_MX51_PAD_CSI2_VSYNC__GPIO4_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC (_MX51_PAD_CSI2_HSYNC__CSI2_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_HSYNC__GPIO4_14 (_MX51_PAD_CSI2_HSYNC__GPIO4_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK (_MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 (_MX51_PAD_CSI2_PIXCLK__GPIO4_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_I2C1_CLK__GPIO4_16 (_MX51_PAD_I2C1_CLK__GPIO4_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_I2C1_CLK__I2C1_CLK (_MX51_PAD_I2C1_CLK__I2C1_CLK | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_I2C1_DAT__GPIO4_17 (_MX51_PAD_I2C1_DAT__GPIO4_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_I2C1_DAT__I2C1_DAT (_MX51_PAD_I2C1_DAT__I2C1_DAT | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD (_MX51_PAD_AUD3_BB_TXD__AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 (_MX51_PAD_AUD3_BB_TXD__GPIO4_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD (_MX51_PAD_AUD3_BB_RXD__AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 (_MX51_PAD_AUD3_BB_RXD__GPIO4_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_RXD__UART3_RXD (_MX51_PAD_AUD3_BB_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_CK__AUD3_TXC (_MX51_PAD_AUD3_BB_CK__AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_CK__GPIO4_20 (_MX51_PAD_AUD3_BB_CK__GPIO4_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS (_MX51_PAD_AUD3_BB_FS__AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_FS__GPIO4_21 (_MX51_PAD_AUD3_BB_FS__GPIO4_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_FS__UART3_TXD (_MX51_PAD_AUD3_BB_FS__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI (_MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_MOSI__GPIO4_22 (_MX51_PAD_CSPI1_MOSI__GPIO4_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_MOSI__I2C1_SDA (_MX51_PAD_CSPI1_MOSI__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_CSPI1_MISO__AUD4_RXD (_MX51_PAD_CSPI1_MISO__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO (_MX51_PAD_CSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_MISO__GPIO4_23 (_MX51_PAD_CSPI1_MISO__GPIO4_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS0__AUD4_TXC (_MX51_PAD_CSPI1_SS0__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 (_MX51_PAD_CSPI1_SS0__ECSPI1_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS0__GPIO4_24 (_MX51_PAD_CSPI1_SS0__GPIO4_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS1__AUD4_TXD (_MX51_PAD_CSPI1_SS1__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 (_MX51_PAD_CSPI1_SS1__ECSPI1_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS1__GPIO4_25 (_MX51_PAD_CSPI1_SS1__GPIO4_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_RDY__AUD4_TXFS (_MX51_PAD_CSPI1_RDY__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY (_MX51_PAD_CSPI1_RDY__ECSPI1_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_RDY__GPIO4_26 (_MX51_PAD_CSPI1_RDY__GPIO4_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK (_MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_SCLK__GPIO4_27 (_MX51_PAD_CSPI1_SCLK__GPIO4_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SCLK__I2C1_SCL (_MX51_PAD_CSPI1_SCLK__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_UART1_RXD__GPIO4_28 (_MX51_PAD_UART1_RXD__GPIO4_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART1_RXD__UART1_RXD (_MX51_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART1_TXD__GPIO4_29 (_MX51_PAD_UART1_TXD__GPIO4_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART1_TXD__PWM2_PWMO (_MX51_PAD_UART1_TXD__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART1_TXD__UART1_TXD (_MX51_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART1_RTS__GPIO4_30 (_MX51_PAD_UART1_RTS__GPIO4_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART1_RTS__UART1_RTS (_MX51_PAD_UART1_RTS__UART1_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART1_CTS__GPIO4_31 (_MX51_PAD_UART1_CTS__GPIO4_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART1_CTS__UART1_CTS (_MX51_PAD_UART1_CTS__UART1_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART2_RXD__FIRI_TXD (_MX51_PAD_UART2_RXD__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART2_RXD__GPIO1_20 (_MX51_PAD_UART2_RXD__GPIO1_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART2_RXD__UART2_RXD (_MX51_PAD_UART2_RXD__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART2_TXD__FIRI_RXD (_MX51_PAD_UART2_TXD__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART2_TXD__GPIO1_21 (_MX51_PAD_UART2_TXD__GPIO1_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART2_TXD__UART2_TXD (_MX51_PAD_UART2_TXD__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART3_RXD__CSI1_D0 (_MX51_PAD_UART3_RXD__CSI1_D0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART3_RXD__GPIO1_22 (_MX51_PAD_UART3_RXD__GPIO1_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART3_RXD__UART1_DTR (_MX51_PAD_UART3_RXD__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART3_RXD__UART3_RXD (_MX51_PAD_UART3_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART3_TXD__CSI1_D1 (_MX51_PAD_UART3_TXD__CSI1_D1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART3_TXD__GPIO1_23 (_MX51_PAD_UART3_TXD__GPIO1_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART3_TXD__UART1_DSR (_MX51_PAD_UART3_TXD__UART1_DSR | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART3_TXD__UART3_TXD (_MX51_PAD_UART3_TXD__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_OWIRE_LINE__GPIO1_24 (_MX51_PAD_OWIRE_LINE__GPIO1_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_OWIRE_LINE__OWIRE_LINE (_MX51_PAD_OWIRE_LINE__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_OWIRE_LINE__SPDIF_OUT (_MX51_PAD_OWIRE_LINE__SPDIF_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_ROW0__KEY_ROW0 (_MX51_PAD_KEY_ROW0__KEY_ROW0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_ROW1__KEY_ROW1 (_MX51_PAD_KEY_ROW1__KEY_ROW1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_ROW2__KEY_ROW2 (_MX51_PAD_KEY_ROW2__KEY_ROW2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_ROW3__KEY_ROW3 (_MX51_PAD_KEY_ROW3__KEY_ROW3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL0__KEY_COL0 (_MX51_PAD_KEY_COL0__KEY_COL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL0__PLL1_BYP (_MX51_PAD_KEY_COL0__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL1__KEY_COL1 (_MX51_PAD_KEY_COL1__KEY_COL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL1__PLL2_BYP (_MX51_PAD_KEY_COL1__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL2__KEY_COL2 (_MX51_PAD_KEY_COL2__KEY_COL2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL2__PLL3_BYP (_MX51_PAD_KEY_COL2__PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL3__KEY_COL3 (_MX51_PAD_KEY_COL3__KEY_COL3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__I2C2_SCL (_MX51_PAD_KEY_COL4__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__KEY_COL4 (_MX51_PAD_KEY_COL4__KEY_COL4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__SPDIF_OUT1 (_MX51_PAD_KEY_COL4__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__UART1_RI (_MX51_PAD_KEY_COL4__UART1_RI | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__UART3_RTS (_MX51_PAD_KEY_COL4__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_KEY_COL5__I2C2_SDA (_MX51_PAD_KEY_COL5__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_KEY_COL5__KEY_COL5 (_MX51_PAD_KEY_COL5__KEY_COL5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL5__UART1_DCD (_MX51_PAD_KEY_COL5__UART1_DCD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_KEY_COL5__UART3_CTS (_MX51_PAD_KEY_COL5__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_CLK__CSPI_SCLK (_MX51_PAD_USBH1_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_CLK__GPIO1_25 (_MX51_PAD_USBH1_CLK__GPIO1_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_CLK__I2C2_SCL (_MX51_PAD_USBH1_CLK__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_USBH1_CLK__USBH1_CLK (_MX51_PAD_USBH1_CLK__USBH1_CLK | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DIR__CSPI_MOSI (_MX51_PAD_USBH1_DIR__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DIR__GPIO1_26 (_MX51_PAD_USBH1_DIR__GPIO1_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DIR__I2C2_SDA (_MX51_PAD_USBH1_DIR__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_USBH1_DIR__USBH1_DIR (_MX51_PAD_USBH1_DIR__USBH1_DIR | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_STP__CSPI_RDY (_MX51_PAD_USBH1_STP__CSPI_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_STP__GPIO1_27 (_MX51_PAD_USBH1_STP__GPIO1_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_STP__UART3_RXD (_MX51_PAD_USBH1_STP__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_STP__USBH1_STP (_MX51_PAD_USBH1_STP__USBH1_STP | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_NXT__CSPI_MISO (_MX51_PAD_USBH1_NXT__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_NXT__GPIO1_28 (_MX51_PAD_USBH1_NXT__GPIO1_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_NXT__UART3_TXD (_MX51_PAD_USBH1_NXT__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_NXT__USBH1_NXT (_MX51_PAD_USBH1_NXT__USBH1_NXT | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA0__GPIO1_11 (_MX51_PAD_USBH1_DATA0__GPIO1_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA0__UART2_CTS (_MX51_PAD_USBH1_DATA0__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 (_MX51_PAD_USBH1_DATA0__USBH1_DATA0 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA1__GPIO1_12 (_MX51_PAD_USBH1_DATA1__GPIO1_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA1__UART2_RXD (_MX51_PAD_USBH1_DATA1__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 (_MX51_PAD_USBH1_DATA1__USBH1_DATA1 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA2__GPIO1_13 (_MX51_PAD_USBH1_DATA2__GPIO1_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA2__UART2_TXD (_MX51_PAD_USBH1_DATA2__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 (_MX51_PAD_USBH1_DATA2__USBH1_DATA2 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA3__GPIO1_14 (_MX51_PAD_USBH1_DATA3__GPIO1_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA3__UART2_RTS (_MX51_PAD_USBH1_DATA3__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 (_MX51_PAD_USBH1_DATA3__USBH1_DATA3 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA4__CSPI_SS0 (_MX51_PAD_USBH1_DATA4__CSPI_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA4__GPIO1_15 (_MX51_PAD_USBH1_DATA4__GPIO1_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 (_MX51_PAD_USBH1_DATA4__USBH1_DATA4 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA5__CSPI_SS1 (_MX51_PAD_USBH1_DATA5__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA5__GPIO1_16 (_MX51_PAD_USBH1_DATA5__GPIO1_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 (_MX51_PAD_USBH1_DATA5__USBH1_DATA5 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA6__CSPI_SS3 (_MX51_PAD_USBH1_DATA6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA6__GPIO1_17 (_MX51_PAD_USBH1_DATA6__GPIO1_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 (_MX51_PAD_USBH1_DATA6__USBH1_DATA6 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 (_MX51_PAD_USBH1_DATA7__ECSPI1_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 (_MX51_PAD_USBH1_DATA7__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA7__GPIO1_18 (_MX51_PAD_USBH1_DATA7__GPIO1_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 (_MX51_PAD_USBH1_DATA7__USBH1_DATA7 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_DI1_PIN11__DI1_PIN11 (_MX51_PAD_DI1_PIN11__DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 (_MX51_PAD_DI1_PIN11__ECSPI1_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_DI1_PIN11__GPIO3_0 (_MX51_PAD_DI1_PIN11__GPIO3_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN12__DI1_PIN12 (_MX51_PAD_DI1_PIN12__DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN12__GPIO3_1 (_MX51_PAD_DI1_PIN12__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN13__DI1_PIN13 (_MX51_PAD_DI1_PIN13__DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN13__GPIO3_2 (_MX51_PAD_DI1_PIN13__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DI1_D0_CS__DI1_D0_CS (_MX51_PAD_DI1_D0_CS__DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_D0_CS__GPIO3_3 (_MX51_PAD_DI1_D0_CS__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DI1_D1_CS__DI1_D1_CS (_MX51_PAD_DI1_D1_CS__DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 (_MX51_PAD_DI1_D1_CS__DISP1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 (_MX51_PAD_DI1_D1_CS__DISP1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_D1_CS__GPIO3_4 (_MX51_PAD_DI1_D1_CS__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 (_MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN (_MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 (_MX51_PAD_DISPB2_SER_DIN__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 (_MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO (_MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 (_MX51_PAD_DISPB2_SER_DIO__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 (_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 (_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK (_MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 (_MX51_PAD_DISPB2_SER_CLK__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK (_MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 (_MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 (_MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS (_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS (_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 (_MX51_PAD_DISPB2_SER_RS__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 (_MX51_PAD_DISP1_DAT0__DISP1_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 (_MX51_PAD_DISP1_DAT1__DISP1_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 (_MX51_PAD_DISP1_DAT2__DISP1_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 (_MX51_PAD_DISP1_DAT3__DISP1_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 (_MX51_PAD_DISP1_DAT4__DISP1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 (_MX51_PAD_DISP1_DAT5__DISP1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC (_MX51_PAD_DISP1_DAT6__BOOT_USB_SRC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 (_MX51_PAD_DISP1_DAT6__DISP1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG (_MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 (_MX51_PAD_DISP1_DAT7__DISP1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 (_MX51_PAD_DISP1_DAT8__BOOT_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 (_MX51_PAD_DISP1_DAT8__DISP1_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 (_MX51_PAD_DISP1_DAT9__BOOT_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 (_MX51_PAD_DISP1_DAT9__DISP1_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE (_MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 (_MX51_PAD_DISP1_DAT10__DISP1_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 (_MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 (_MX51_PAD_DISP1_DAT11__DISP1_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL (_MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 (_MX51_PAD_DISP1_DAT12__DISP1_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 (_MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 (_MX51_PAD_DISP1_DAT13__DISP1_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 (_MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 (_MX51_PAD_DISP1_DAT14__DISP1_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH (_MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 (_MX51_PAD_DISP1_DAT15__DISP1_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 (_MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 (_MX51_PAD_DISP1_DAT16__DISP1_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 (_MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 (_MX51_PAD_DISP1_DAT17__DISP1_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 (_MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 (_MX51_PAD_DISP1_DAT18__DISP1_DAT18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 (_MX51_PAD_DISP1_DAT18__DISP2_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 (_MX51_PAD_DISP1_DAT18__DISP2_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 (_MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 (_MX51_PAD_DISP1_DAT19__DISP1_DAT19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 (_MX51_PAD_DISP1_DAT19__DISP2_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 (_MX51_PAD_DISP1_DAT19__DISP2_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 (_MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 (_MX51_PAD_DISP1_DAT20__DISP1_DAT20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 (_MX51_PAD_DISP1_DAT20__DISP2_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 (_MX51_PAD_DISP1_DAT20__DISP2_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 (_MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 (_MX51_PAD_DISP1_DAT21__DISP1_DAT21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 (_MX51_PAD_DISP1_DAT21__DISP2_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 (_MX51_PAD_DISP1_DAT21__DISP2_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 (_MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 (_MX51_PAD_DISP1_DAT22__DISP1_DAT22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS (_MX51_PAD_DISP1_DAT22__DISP2_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 (_MX51_PAD_DISP1_DAT22__DISP2_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 (_MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 (_MX51_PAD_DISP1_DAT23__DISP1_DAT23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS (_MX51_PAD_DISP1_DAT23__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 (_MX51_PAD_DISP1_DAT23__DISP2_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS (_MX51_PAD_DISP1_DAT23__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN3__DI1_PIN3 (_MX51_PAD_DI1_PIN3__DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN2__DI1_PIN2 (_MX51_PAD_DI1_PIN2__DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP2__DISP1_SER_CLK (_MX51_PAD_DI_GP2__DISP1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP2__DISP2_WAIT (_MX51_PAD_DI_GP2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP3__CSI1_DATA_EN (_MX51_PAD_DI_GP3__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP3__DISP1_SER_DIO (_MX51_PAD_DI_GP3__DISP1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP3__FEC_TX_ER (_MX51_PAD_DI_GP3__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN (_MX51_PAD_DI2_PIN4__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN4__DI2_PIN4 (_MX51_PAD_DI2_PIN4__DI2_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN4__FEC_CRS (_MX51_PAD_DI2_PIN4__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN2__DI2_PIN2 (_MX51_PAD_DI2_PIN2__DI2_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN2__FEC_MDC (_MX51_PAD_DI2_PIN2__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DI2_PIN3__DI2_PIN3 (_MX51_PAD_DI2_PIN3__DI2_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN3__FEC_MDIO (_MX51_PAD_DI2_PIN3__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK (_MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 (_MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP4__DI2_PIN15 (_MX51_PAD_DI_GP4__DI2_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP4__DISP1_SER_DIN (_MX51_PAD_DI_GP4__DISP1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP4__DISP2_PIN1 (_MX51_PAD_DI_GP4__DISP2_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP4__FEC_RDATA2 (_MX51_PAD_DI_GP4__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 (_MX51_PAD_DISP2_DAT0__DISP2_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 (_MX51_PAD_DISP2_DAT0__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__KEY_COL6 (_MX51_PAD_DISP2_DAT0__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__UART3_RXD (_MX51_PAD_DISP2_DAT0__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__USBH3_CLK (_MX51_PAD_DISP2_DAT0__USBH3_CLK | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 (_MX51_PAD_DISP2_DAT1__DISP2_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__FEC_RX_ER (_MX51_PAD_DISP2_DAT1__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__KEY_COL7 (_MX51_PAD_DISP2_DAT1__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__UART3_TXD (_MX51_PAD_DISP2_DAT1__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__USBH3_DIR (_MX51_PAD_DISP2_DAT1__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 (_MX51_PAD_DISP2_DAT2__DISP2_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 (_MX51_PAD_DISP2_DAT3__DISP2_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 (_MX51_PAD_DISP2_DAT4__DISP2_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 (_MX51_PAD_DISP2_DAT5__DISP2_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 (_MX51_PAD_DISP2_DAT6__DISP2_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 (_MX51_PAD_DISP2_DAT6__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT6__GPIO1_19 (_MX51_PAD_DISP2_DAT6__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT6__KEY_ROW4 (_MX51_PAD_DISP2_DAT6__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT6__USBH3_STP (_MX51_PAD_DISP2_DAT6__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 (_MX51_PAD_DISP2_DAT7__DISP2_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 (_MX51_PAD_DISP2_DAT7__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT7__GPIO1_29 (_MX51_PAD_DISP2_DAT7__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT7__KEY_ROW5 (_MX51_PAD_DISP2_DAT7__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT7__USBH3_NXT (_MX51_PAD_DISP2_DAT7__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 (_MX51_PAD_DISP2_DAT8__DISP2_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 (_MX51_PAD_DISP2_DAT8__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT8__GPIO1_30 (_MX51_PAD_DISP2_DAT8__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT8__KEY_ROW6 (_MX51_PAD_DISP2_DAT8__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 (_MX51_PAD_DISP2_DAT8__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT9__AUD6_RXC (_MX51_PAD_DISP2_DAT9__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 (_MX51_PAD_DISP2_DAT9__DISP2_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT9__FEC_TX_EN (_MX51_PAD_DISP2_DAT9__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT9__GPIO1_31 (_MX51_PAD_DISP2_DAT9__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 (_MX51_PAD_DISP2_DAT9__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 (_MX51_PAD_DISP2_DAT10__DISP2_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS (_MX51_PAD_DISP2_DAT10__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__FEC_COL (_MX51_PAD_DISP2_DAT10__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__KEY_ROW7 (_MX51_PAD_DISP2_DAT10__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 (_MX51_PAD_DISP2_DAT10__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__AUD6_TXD (_MX51_PAD_DISP2_DAT11__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 (_MX51_PAD_DISP2_DAT11__DISP2_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK (_MX51_PAD_DISP2_DAT11__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__GPIO1_10 (_MX51_PAD_DISP2_DAT11__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 (_MX51_PAD_DISP2_DAT11__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT12__AUD6_RXD (_MX51_PAD_DISP2_DAT12__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 (_MX51_PAD_DISP2_DAT12__DISP2_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT12__FEC_RX_DV (_MX51_PAD_DISP2_DAT12__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 (_MX51_PAD_DISP2_DAT12__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT13__AUD6_TXC (_MX51_PAD_DISP2_DAT13__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 (_MX51_PAD_DISP2_DAT13__DISP2_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK (_MX51_PAD_DISP2_DAT13__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
+#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 (_MX51_PAD_DISP2_DAT13__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT14__AUD6_TXFS (_MX51_PAD_DISP2_DAT14__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 (_MX51_PAD_DISP2_DAT14__DISP2_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 (_MX51_PAD_DISP2_DAT14__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
+#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 (_MX51_PAD_DISP2_DAT14__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT15__AUD6_RXFS (_MX51_PAD_DISP2_DAT15__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS (_MX51_PAD_DISP2_DAT15__DISP1_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 (_MX51_PAD_DISP2_DAT15__DISP2_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 (_MX51_PAD_DISP2_DAT15__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 (_MX51_PAD_DISP2_DAT15__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CMD__AUD5_RXFS (_MX51_PAD_SD1_CMD__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CMD__CSPI_MOSI (_MX51_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CMD__SD1_CMD (_MX51_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
+#define MX51_PAD_SD1_CLK__AUD5_RXC (_MX51_PAD_SD1_CLK__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CLK__CSPI_SCLK (_MX51_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CLK__SD1_CLK (_MX51_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
+#define MX51_PAD_SD1_DATA0__AUD5_TXD (_MX51_PAD_SD1_DATA0__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA0__CSPI_MISO (_MX51_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD1_DATA0__SD1_DATA0 (_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA0__EIM_DA0 (_MX51_PAD_EIM_DA0__EIM_DA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA1__EIM_DA1 (_MX51_PAD_EIM_DA1__EIM_DA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA2__EIM_DA2 (_MX51_PAD_EIM_DA2__EIM_DA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA3__EIM_DA3 (_MX51_PAD_EIM_DA3__EIM_DA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA1__AUD5_RXD (_MX51_PAD_SD1_DATA1__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA1__SD1_DATA1 (_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA4__EIM_DA4 (_MX51_PAD_EIM_DA4__EIM_DA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA5__EIM_DA5 (_MX51_PAD_EIM_DA5__EIM_DA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA6__EIM_DA6 (_MX51_PAD_EIM_DA6__EIM_DA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA7__EIM_DA7 (_MX51_PAD_EIM_DA7__EIM_DA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA2__AUD5_TXC (_MX51_PAD_SD1_DATA2__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA2__SD1_DATA2 (_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA10__EIM_DA10 (_MX51_PAD_EIM_DA10__EIM_DA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA11__EIM_DA11 (_MX51_PAD_EIM_DA11__EIM_DA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA8__EIM_DA8 (_MX51_PAD_EIM_DA8__EIM_DA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA9__EIM_DA9 (_MX51_PAD_EIM_DA9__EIM_DA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS (_MX51_PAD_SD1_DATA3__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA3__CSPI_SS1 (_MX51_PAD_SD1_DATA3__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD1_DATA3__SD1_DATA3 (_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_0__CSPI_SS2 (_MX51_PAD_GPIO1_0__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_GPIO1_0__GPIO1_0 (_MX51_PAD_GPIO1_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_0__SD1_CD (_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
+#define MX51_PAD_GPIO1_1__CSPI_MISO (_MX51_PAD_GPIO1_1__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_GPIO1_1__GPIO1_1 (_MX51_PAD_GPIO1_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_1__SD1_WP (_MX51_PAD_GPIO1_1__SD1_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
+#define MX51_PAD_EIM_DA12__EIM_DA12 (_MX51_PAD_EIM_DA12__EIM_DA12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA13__EIM_DA13 (_MX51_PAD_EIM_DA13__EIM_DA13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA14__EIM_DA14 (_MX51_PAD_EIM_DA14__EIM_DA14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA15__EIM_DA15 (_MX51_PAD_EIM_DA15__EIM_DA15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_CMD__CSPI_MOSI (_MX51_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD2_CMD__I2C1_SCL (_MX51_PAD_SD2_CMD__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_SD2_CMD__SD2_CMD (_MX51_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
+#define MX51_PAD_SD2_CLK__CSPI_SCLK (_MX51_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD2_CLK__I2C1_SDA (_MX51_PAD_SD2_CLK__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_SD2_CLK__SD2_CLK (_MX51_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
+#define MX51_PAD_SD2_DATA0__CSPI_MISO (_MX51_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD2_DATA0__SD1_DAT4 (_MX51_PAD_SD2_DATA0__SD1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA0__SD2_DATA0 (_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA1__SD1_DAT5 (_MX51_PAD_SD2_DATA1__SD1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA1__SD2_DATA1 (_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP (_MX51_PAD_SD2_DATA1__USBH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA2__SD1_DAT6 (_MX51_PAD_SD2_DATA2__SD1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA2__SD2_DATA2 (_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM (_MX51_PAD_SD2_DATA2__USBH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA3__CSPI_SS2 (_MX51_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD2_DATA3__SD1_DAT7 (_MX51_PAD_SD2_DATA3__SD1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA3__SD2_DATA3 (_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__CCM_OUT_2 (_MX51_PAD_GPIO1_2__CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__GPIO1_2 (_MX51_PAD_GPIO1_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__I2C2_SCL (_MX51_PAD_GPIO1_2__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__PLL1_BYP (_MX51_PAD_GPIO1_2__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__PWM1_PWMO (_MX51_PAD_GPIO1_2__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_3__GPIO1_3 (_MX51_PAD_GPIO1_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_3__I2C2_SDA (_MX51_PAD_GPIO1_3__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_GPIO1_3__PLL2_BYP (_MX51_PAD_GPIO1_3__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_3__PWM2_PWMO (_MX51_PAD_GPIO1_3__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ (_MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B (_MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK (_MX51_PAD_GPIO1_4__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_4__EIM_RDY (_MX51_PAD_GPIO1_4__EIM_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_4__GPIO1_4 (_MX51_PAD_GPIO1_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B (_MX51_PAD_GPIO1_4__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_5__CSI2_MCLK (_MX51_PAD_GPIO1_5__CSI2_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_5__DISP2_PIN16 (_MX51_PAD_GPIO1_5__DISP2_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_5__GPIO1_5 (_MX51_PAD_GPIO1_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B (_MX51_PAD_GPIO1_5__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_6__DISP2_PIN17 (_MX51_PAD_GPIO1_6__DISP2_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_6__GPIO1_6 (_MX51_PAD_GPIO1_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_6__REF_EN_B (_MX51_PAD_GPIO1_6__REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_7__CCM_OUT_0 (_MX51_PAD_GPIO1_7__CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_7__GPIO1_7 (_MX51_PAD_GPIO1_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_7__SD2_WP (_MX51_PAD_GPIO1_7__SD2_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
+#define MX51_PAD_GPIO1_7__SPDIF_OUT1 (_MX51_PAD_GPIO1_7__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_8__CSI2_DATA_EN (_MX51_PAD_GPIO1_8__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_8__GPIO1_8 (_MX51_PAD_GPIO1_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_8__SD2_CD (_MX51_PAD_GPIO1_8__SD2_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
+#define MX51_PAD_GPIO1_8__USBH3_PWR (_MX51_PAD_GPIO1_8__USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__CCM_OUT_1 (_MX51_PAD_GPIO1_9__CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__DISP2_D1_CS (_MX51_PAD_GPIO1_9__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__DISP2_SER_CS (_MX51_PAD_GPIO1_9__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__GPIO1_9 (_MX51_PAD_GPIO1_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__SD2_LCTL (_MX51_PAD_GPIO1_9__SD2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__USBH3_OC (_MX51_PAD_GPIO1_9__USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
new file mode 100644
index 0000000..5deee01
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -0,0 +1,323 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc..
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_IOMUX_MX53_H__
+#define __MACH_IOMUX_MX53_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+ IOMUX_CONFIG_ALT0,
+ IOMUX_CONFIG_ALT1,
+ IOMUX_CONFIG_ALT2,
+ IOMUX_CONFIG_ALT3,
+ IOMUX_CONFIG_ALT4,
+ IOMUX_CONFIG_ALT5,
+ IOMUX_CONFIG_ALT6,
+ IOMUX_CONFIG_ALT7,
+ IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
+ IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* These 2 defines are for pins that may not have a mux register, but could
+ * have a pad setting register, and vice-versa. */
+#define NON_MUX_I 0x00
+#define NON_PAD_I 0x00
+
+#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+/* UART1 */
+#define MX53_PAD_CSI0_D10__UART1_TXD IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_D11__UART1_RXD IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DIOW__UART1_TXD IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DMACK__UART1_RXD IOMUX_PAD(0x5F4, 0x274, 3, 0x880, 3, MX53_UART_PAD_CTRL)
+
+/* UART2 */
+#define MX53_PAD_ATA_BUFFER_EN__UART2_RXD IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DMARQ__UART2_TXD IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, MX53_UART_PAD_CTRL)
+
+/* UART3 */
+#define MX53_PAD_ATA_CS_0__UART3_TXD IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_CS_1__UART3_RXD IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
+
+#define MX53_PAD_GPIO_19__GPIO_4_5 IOMUX_PAD(0x348, 0x20,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__GPIO_4_6 IOMUX_PAD(0x34C, 0x24,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__GPIO_4_7 IOMUX_PAD(0x350, 0x28,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__GPIO_4_8 IOMUX_PAD(0x354, 0x2C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__GPIO_4_9 IOMUX_PAD(0x358, 0x30,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__GPIO_4_10 IOMUX_PAD(0x35C, 0x34,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__GPIO_4_11 IOMUX_PAD(0x360, 0x38,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__GPIO_4_12 IOMUX_PAD(0x364, 0x3C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__GPIO_4_13 IOMUX_PAD(0x368, 0x40,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__GPIO_4_14 IOMUX_PAD(0x36C, 0x44,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__GPIO_4_15 IOMUX_PAD(0x370, 0x48,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_KEYPAD__NVCC_KEYPAD IOMUX_PAD(0x374, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__GPIO_4_16 IOMUX_PAD(0x378, 0x4C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__GPIO_4_17 IOMUX_PAD(0x37C, 0x50,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__GPIO_4_18 IOMUX_PAD(0x380, 0x54,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__GPIO_4_19 IOMUX_PAD(0x384, 0x58,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__GPIO_4_20 IOMUX_PAD(0x388, 0x5C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__GPIO_4_21 IOMUX_PAD(0x38C, 0x60,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__GPIO_4_22 IOMUX_PAD(0x390, 0x64,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__GPIO_4_23 IOMUX_PAD(0x394, 0x68,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__GPIO_4_24 IOMUX_PAD(0x398, 0x6C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__GPIO_4_25 IOMUX_PAD(0x39C, 0x70,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__GPIO_4_26 IOMUX_PAD(0x3A0, 0x74,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__GPIO_4_27 IOMUX_PAD(0x3A4, 0x78,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__GPIO_4_28 IOMUX_PAD(0x3A8, 0x7C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__GPIO_4_29 IOMUX_PAD(0x3AC, 0x80,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__GPIO_4_30 IOMUX_PAD(0x3B0, 0x84,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__GPIO_4_31 IOMUX_PAD(0x3B4, 0x88,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__GPIO_5_5 IOMUX_PAD(0x3B8, 0x8C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__GPIO_5_6 IOMUX_PAD(0x3BC, 0x90,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__GPIO_5_7 IOMUX_PAD(0x3C0, 0x94,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__GPIO_5_8 IOMUX_PAD(0x3C4, 0x98,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__GPIO_5_9 IOMUX_PAD(0x3C8, 0x9C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__GPIO_5_10 IOMUX_PAD(0x3CC, 0xA0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__GPIO_5_11 IOMUX_PAD(0x3D0, 0xA4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__GPIO_5_12 IOMUX_PAD(0x3D4, 0xA8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__GPIO_5_13 IOMUX_PAD(0x3D8, 0xAC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__GPIO_5_14 IOMUX_PAD(0x3DC, 0xB0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__GPIO_5_15 IOMUX_PAD(0x3E0, 0xB4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__GPIO_5_16 IOMUX_PAD(0x3E4, 0xB8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__GPIO_5_17 IOMUX_PAD(0x3E8, 0xBC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__GPIO_5_18 IOMUX_PAD(0x3EC, 0xC0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__GPIO_5_19 IOMUX_PAD(0x3F0, 0xC4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__GPIO_5_20 IOMUX_PAD(0x3F4, 0xC8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__GPIO_5_21 IOMUX_PAD(0x3F8, 0xCC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D4__GPIO_5_22 IOMUX_PAD(0x3FC, 0xD0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D5__GPIO_5_23 IOMUX_PAD(0x400, 0xD4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D6__GPIO_5_24 IOMUX_PAD(0x404, 0xD8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D7__GPIO_5_25 IOMUX_PAD(0x408, 0xDC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D8__GPIO_5_26 IOMUX_PAD(0x40C, 0xE0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D9__GPIO_5_27 IOMUX_PAD(0x410, 0xE4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D10__GPIO_5_28 IOMUX_PAD(0x414, 0xE8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D11__GPIO_5_29 IOMUX_PAD(0x418, 0xEC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D12__GPIO_5_30 IOMUX_PAD(0x41C, 0xF0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D13__GPIO_5_31 IOMUX_PAD(0x420, 0xF4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D14__GPIO_6_0 IOMUX_PAD(0x424, 0xF8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D15__GPIO_6_1 IOMUX_PAD(0x428, 0xFC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D16__GPIO_6_2 IOMUX_PAD(0x42C, 0x100,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D17__GPIO_6_3 IOMUX_PAD(0x430, 0x104,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D18__GPIO_6_4 IOMUX_PAD(0x434, 0x108,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D19__GPIO_6_5 IOMUX_PAD(0x438, 0x10C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_CSI0__NVCC_CSI0 IOMUX_PAD(0x43C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TMS__JTAG_TMS IOMUX_PAD(0x440, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_MOD__JTAG_MOD IOMUX_PAD(0x444, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TRSTB__JTAG_TRSTB IOMUX_PAD(0x448, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TDI__JTAG_TDI IOMUX_PAD(0x44C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TCK__JTAG_TCK IOMUX_PAD(0x450, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TDO__JTAG_TDO IOMUX_PAD(0x454, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__GPIO_5_2 IOMUX_PAD(0x458, 0x110,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__GPIO_2_30 IOMUX_PAD(0x45C, 0x114,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__GPIO_3_16 IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__GPIO_3_17 IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__GPIO_3_18 IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__GPIO_3_19 IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__GPIO_3_20 IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__GPIO_3_21 IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__GPIO_3_22 IOMUX_PAD(0x478, 0x130,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__GPIO_3_23 IOMUX_PAD(0x47C, 0x134,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__GPIO_2_31 IOMUX_PAD(0x480, 0x138,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__GPIO_3_24 IOMUX_PAD(0x484, 0x13C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__GPIO_3_25 IOMUX_PAD(0x488, 0x140,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__GPIO_3_26 IOMUX_PAD(0x48C, 0x144,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__GPIO_3_27 IOMUX_PAD(0x490, 0x148,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__GPIO_3_28 IOMUX_PAD(0x494, 0x14C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__GPIO_3_29 IOMUX_PAD(0x498, 0x150,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__GPIO_3_30 IOMUX_PAD(0x49C, 0x154,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__GPIO_3_31 IOMUX_PAD(0x4A0, 0x158,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM1__NVCC_EIM1 IOMUX_PAD(0x4A4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__GPIO_5_4 IOMUX_PAD(0x4A8, 0x15C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__GPIO_6_6 IOMUX_PAD(0x4AC, 0x160,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x4B0, 0x164,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__GPIO_2_17 IOMUX_PAD(0x4B4, 0x168,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__GPIO_2_18 IOMUX_PAD(0x4B8, 0x16C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__GPIO_2_19 IOMUX_PAD(0x4BC, 0x170,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__GPIO_2_20 IOMUX_PAD(0x4C0, 0x174,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__GPIO_2_21 IOMUX_PAD(0x4C4, 0x178,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__GPIO_2_22 IOMUX_PAD(0x4C8, 0x17C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__GPIO_2_23 IOMUX_PAD(0x4CC, 0x180,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__GPIO_2_24 IOMUX_PAD(0x4D0, 0x184,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__GPIO_2_25 IOMUX_PAD(0x4D4, 0x188,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__GPIO_2_26 IOMUX_PAD(0x4D8, 0x18C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__GPIO_2_27 IOMUX_PAD(0x4DC, 0x190,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM4__NVCC_EIM4 IOMUX_PAD(0x4E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__GPIO_2_28 IOMUX_PAD(0x4E4, 0x194,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__GPIO_2_29 IOMUX_PAD(0x4E8, 0x198,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__GPIO_3_0 IOMUX_PAD(0x4EC, 0x19C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__GPIO_3_1 IOMUX_PAD(0x4F0, 0x1A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__GPIO_3_2 IOMUX_PAD(0x4F4, 0x1A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__GPIO_3_3 IOMUX_PAD(0x4F8, 0x1A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__GPIO_3_4 IOMUX_PAD(0x4FC, 0x1AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__GPIO_3_5 IOMUX_PAD(0x500, 0x1B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__GPIO_3_6 IOMUX_PAD(0x504, 0x1B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__GPIO_3_7 IOMUX_PAD(0x508, 0x1B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__GPIO_3_8 IOMUX_PAD(0x50C, 0x1BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__GPIO_3_9 IOMUX_PAD(0x510, 0x1C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__GPIO_3_10 IOMUX_PAD(0x514, 0x1C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__GPIO_3_11 IOMUX_PAD(0x518, 0x1C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__GPIO_3_12 IOMUX_PAD(0x51C, 0x1CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__GPIO_3_13 IOMUX_PAD(0x520, 0x1D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__GPIO_3_14 IOMUX_PAD(0x524, 0x1D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__GPIO_3_15 IOMUX_PAD(0x528, 0x1D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WE_B__GPIO_6_12 IOMUX_PAD(0x52C, 0x1DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RE_B__GPIO_6_13 IOMUX_PAD(0x530, 0x1E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__GPIO_5_0 IOMUX_PAD(0x534, 0x1E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_BCLK__EIM_BCLK IOMUX_PAD(0x538, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM7__NVCC_EIM7 IOMUX_PAD(0x53C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX3_P__GPIO_6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX2_P__GPIO_6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_CLK_P__GPIO_6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX1_P__GPIO_6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX0_P__GPIO_6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX3_P__GPIO_7_22 IOMUX_PAD(NON_PAD_I, 0x200, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_CLK_P__GPIO_7_24 IOMUX_PAD(NON_PAD_I, 0x204, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX2_P__GPIO_7_26 IOMUX_PAD(NON_PAD_I, 0x208, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX1_P__GPIO_7_28 IOMUX_PAD(NON_PAD_I, 0x20C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX0_P__GPIO_7_30 IOMUX_PAD(NON_PAD_I, 0x210, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_10__GPIO_4_0 IOMUX_PAD(0x540, 0x214, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_11__GPIO_4_1 IOMUX_PAD(0x544, 0x218, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_12__GPIO_4_2 IOMUX_PAD(0x548, 0x21C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_13__GPIO_4_3 IOMUX_PAD(0x54C, 0x220, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_14__GPIO_4_4 IOMUX_PAD(0x550, 0x224, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM3__DRAM_DQM3 IOMUX_PAD(0x554, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS3__DRAM_SDQS3 IOMUX_PAD(0x558, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCKE1__DRAM_SDCKE1 IOMUX_PAD(0x55C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM2__DRAM_DQM2 IOMUX_PAD(0x560, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDODT1__DRAM_SDODT1 IOMUX_PAD(0x564, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS2__DRAM_SDQS2 IOMUX_PAD(0x568, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_RESET__DRAM_RESET IOMUX_PAD(0x56C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCLK1__DRAM_SDCLK1 IOMUX_PAD(0x570, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_CAS__DRAM_CAS IOMUX_PAD(0x574, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCLK0__DRAM_SDCLK0 IOMUX_PAD(0x578, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS0__DRAM_SDQS0 IOMUX_PAD(0x57C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDODT0__DRAM_SDODT0 IOMUX_PAD(0x580, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM0__DRAM_DQM0 IOMUX_PAD(0x584, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_RAS__DRAM_RAS IOMUX_PAD(0x588, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCKE0__DRAM_SDCKE0 IOMUX_PAD(0x58C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS1__DRAM_SDQS1 IOMUX_PAD(0x590, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM1__DRAM_DQM1 IOMUX_PAD(0x594, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x598, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x59C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__GPIO_6_7 IOMUX_PAD(0x5A0, 0x228,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__GPIO_6_8 IOMUX_PAD(0x5A4, 0x22C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__GPIO_6_9 IOMUX_PAD(0x5A8, 0x230,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__GPIO_6_10 IOMUX_PAD(0x5AC, 0x234,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__GPIO_6_11 IOMUX_PAD(0x5B0, 0x238,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__GPIO_6_14 IOMUX_PAD(0x5B4, 0x23C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__GPIO_6_15 IOMUX_PAD(0x5B8, 0x240,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__GPIO_6_16 IOMUX_PAD(0x5BC, 0x244,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_NANDF__NVCC_NANDF IOMUX_PAD(0x5C0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__GPIO_1_22 IOMUX_PAD(0x5C4, 0x248,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__GPIO_1_23 IOMUX_PAD(0x5C8, 0x24C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__GPIO_1_24 IOMUX_PAD(0x5CC, 0x250,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__GPIO_1_25 IOMUX_PAD(0x5D0, 0x254,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__GPIO_1_26 IOMUX_PAD(0x5D4, 0x258,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__GPIO_1_27 IOMUX_PAD(0x5D8, 0x25C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__GPIO_1_28 IOMUX_PAD(0x5DC, 0x260,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__GPIO_1_29 IOMUX_PAD(0x5E0, 0x264,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__GPIO_1_30 IOMUX_PAD(0x5E4, 0x268,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__GPIO_1_31 IOMUX_PAD(0x5E8, 0x26C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_FEC__NVCC_FEC IOMUX_PAD(0x5EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DIOW__GPIO_6_17 IOMUX_PAD(0x5F0, 0x270,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DMACK__GPIO_6_18 IOMUX_PAD(0x5F4, 0x274,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DMARQ__GPIO_7_0 IOMUX_PAD(0x5F8, 0x278,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_BUFFER_EN__GPIO_7_1 IOMUX_PAD(0x5FC, 0x27C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_INTRQ__GPIO_7_2 IOMUX_PAD(0x600, 0x280,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DIOR__GPIO_7_3 IOMUX_PAD(0x604, 0x284,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_RESET_B__GPIO_7_4 IOMUX_PAD(0x608, 0x288,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_IORDY__GPIO_7_5 IOMUX_PAD(0x60C, 0x28C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_0__GPIO_7_6 IOMUX_PAD(0x610, 0x290,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_1__GPIO_7_7 IOMUX_PAD(0x614, 0x294,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_2__GPIO_7_8 IOMUX_PAD(0x618, 0x298,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_CS_0__GPIO_7_9 IOMUX_PAD(0x61C, 0x29C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_CS_1__GPIO_7_10 IOMUX_PAD(0x620, 0x2A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_ATA2__NVCC_ATA2 IOMUX_PAD(0x624, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA0__GPIO_2_0 IOMUX_PAD(0x628, 0x2A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA1__GPIO_2_1 IOMUX_PAD(0x62C, 0x2A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA2__GPIO_2_2 IOMUX_PAD(0x630, 0x2AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA3__GPIO_2_3 IOMUX_PAD(0x634, 0x2B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA4__GPIO_2_4 IOMUX_PAD(0x638, 0x2B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA5__GPIO_2_5 IOMUX_PAD(0x63C, 0x2B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA6__GPIO_2_6 IOMUX_PAD(0x640, 0x2BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA7__GPIO_2_7 IOMUX_PAD(0x644, 0x2C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA8__GPIO_2_8 IOMUX_PAD(0x648, 0x2C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA9__GPIO_2_9 IOMUX_PAD(0x64C, 0x2C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA10__GPIO_2_10 IOMUX_PAD(0x650, 0x2CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA11__GPIO_2_11 IOMUX_PAD(0x654, 0x2D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA12__GPIO_2_12 IOMUX_PAD(0x658, 0x2D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA13__GPIO_2_13 IOMUX_PAD(0x65C, 0x2D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA14__GPIO_2_14 IOMUX_PAD(0x660, 0x2DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA15__GPIO_2_15 IOMUX_PAD(0x664, 0x2E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_ATA0__NVCC_ATA0 IOMUX_PAD(0x668, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__GPIO_1_16 IOMUX_PAD(0x66C, 0x2E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__GPIO_1_17 IOMUX_PAD(0x670, 0x2E8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__GPIO_1_18 IOMUX_PAD(0x674, 0x2EC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__GPIO_1_19 IOMUX_PAD(0x678, 0x2F0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__GPIO_1_20 IOMUX_PAD(0x67C, 0x2F4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__GPIO_1_21 IOMUX_PAD(0x680, 0x2F8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_SD1__NVCC_SD1 IOMUX_PAD(0x684, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__GPIO_1_10 IOMUX_PAD(0x688, 0x2FC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__GPIO_1_11 IOMUX_PAD(0x68C, 0x300,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__GPIO_1_12 IOMUX_PAD(0x690, 0x304,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__GPIO_1_13 IOMUX_PAD(0x694, 0x308,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__GPIO_1_14 IOMUX_PAD(0x698, 0x30C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__GPIO_1_15 IOMUX_PAD(0x69C, 0x310,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_SD2__NVCC_SD2 IOMUX_PAD(0x6A0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__GPIO_1_0 IOMUX_PAD(0x6A4, 0x314,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__GPIO_1_1 IOMUX_PAD(0x6A8, 0x318,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__GPIO_1_9 IOMUX_PAD(0x6AC, 0x31C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__GPIO_1_3 IOMUX_PAD(0x6B0, 0x320,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__GPIO_1_6 IOMUX_PAD(0x6B4, 0x324,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__GPIO_1_2 IOMUX_PAD(0x6B8, 0x328,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__GPIO_1_4 IOMUX_PAD(0x6BC, 0x32C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__GPIO_1_5 IOMUX_PAD(0x6C0, 0x330,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__GPIO_1_7 IOMUX_PAD(0x6C4, 0x334,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__GPIO_1_8 IOMUX_PAD(0x6C8, 0x338,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__GPIO_7_11 IOMUX_PAD(0x6CC, 0x33C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__GPIO_7_12 IOMUX_PAD(0x6D0, 0x340,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__GPIO_7_13 IOMUX_PAD(0x6D4, 0x344,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_GPIO__NVCC_GPIO IOMUX_PAD(0x6D8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_POR_B__POR_B IOMUX_PAD(0x6DC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x6E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_RESET_IN_B__RESET_IN_B IOMUX_PAD(0x6E4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x6E8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_TEST_MODE__TEST_MODE IOMUX_PAD(0x6EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_ADDDS__GRP_ADDDS IOMUX_PAD(0x6F0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRMODE_CTL__GRP_DDRMODE_CTL IOMUX_PAD(0x6F4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRPKE__GRP_DDRPKE IOMUX_PAD(0x6FC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRPK__GRP_DDRPK IOMUX_PAD(0x708, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_TERM_CTL3__GRP_TERM_CTL3 IOMUX_PAD(0x70C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRHYS__GRP_DDRHYS IOMUX_PAD(0x710, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRMODE__GRP_DDRMODE IOMUX_PAD(0x714, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B0DS__GRP_B0DS IOMUX_PAD(0x718, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B1DS__GRP_B1DS IOMUX_PAD(0x71C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_CTLDS__GRP_CTLDS IOMUX_PAD(0x720, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDR_TYPE__GRP_DDR_TYPE IOMUX_PAD(0x724, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B2DS__GRP_B2DS IOMUX_PAD(0x728, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B3DS__GRP_B3DS IOMUX_PAD(0x72C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 0880a4a..2277b01 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -42,28 +42,44 @@
* If <padname> or <padmode> refers to a GPIO, it is named
* GPIO_<unit>_<num>
*
- */
+ * IOMUX/PAD Bit field definitions
+ *
+ * MUX_CTRL_OFS: 0..11 (12)
+ * PAD_CTRL_OFS: 12..23 (12)
+ * SEL_INPUT_OFS: 24..35 (12)
+ * MUX_MODE + SION: 36..40 (5)
+ * PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
+ * SEL_INP: 58..61 (4)
+ * reserved: 63 (1)
+*/
-struct pad_desc {
- unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
- unsigned mux_mode:8;
- unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
-#define NO_PAD_CTRL (1 << 16)
- unsigned pad_ctrl:17;
- unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
- unsigned select_input:3;
-};
+typedef u64 iomux_v3_cfg_t;
-#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
- _select_input, _pad_ctrl) \
- { \
- .mux_ctrl_ofs = _mux_ctrl_ofs, \
- .mux_mode = _mux_mode, \
- .pad_ctrl_ofs = _pad_ctrl_ofs, \
- .pad_ctrl = _pad_ctrl, \
- .select_input_ofs = _select_input_ofs, \
- .select_input = _select_input, \
- }
+#define MUX_CTRL_OFS_SHIFT 0
+#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
+#define MUX_PAD_CTRL_OFS_SHIFT 12
+#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT)
+#define MUX_SEL_INPUT_OFS_SHIFT 24
+#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT)
+
+#define MUX_MODE_SHIFT 36
+#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
+#define MUX_PAD_CTRL_SHIFT 41
+#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
+#define NO_PAD_CTRL ((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16))
+#define MUX_SEL_INPUT_SHIFT 58
+#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
+
+#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
+ _sel_input, _pad_ctrl) \
+ (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
+ ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \
+ ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
+ ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
+ ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
+ ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
/*
* Use to set PAD control
@@ -107,13 +123,13 @@
/*
* setups a single pad in the iomuxer
*/
-int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
/*
* setups mutliple pads
* convenient way to call the above function with tables
*/
-int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
/*
* Initialise the iomux controller
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 86781f7..58a49cc 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -23,13 +23,17 @@
#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
/* these are ordered by size to support multi-SoC kernels */
-#if defined CONFIG_ARCH_MX2
+#if defined CONFIG_ARCH_MX53
+#define MXC_GPIO_IRQS (32 * 7)
+#elif defined CONFIG_ARCH_MX2
+#define MXC_GPIO_IRQS (32 * 6)
+#elif defined CONFIG_ARCH_MX50
#define MXC_GPIO_IRQS (32 * 6)
#elif defined CONFIG_ARCH_MX1
#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MX25
#define MXC_GPIO_IRQS (32 * 4)
-#elif defined CONFIG_ARCH_MX5
+#elif defined CONFIG_ARCH_MX51
#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MXC91231
#define MXC_GPIO_IRQS (32 * 4)
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 564ec9d..8386140 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -16,7 +16,9 @@
#define MX25_PHYS_OFFSET UL(0x80000000)
#define MX27_PHYS_OFFSET UL(0xa0000000)
#define MX3x_PHYS_OFFSET UL(0x80000000)
+#define MX50_PHYS_OFFSET UL(0x70000000)
#define MX51_PHYS_OFFSET UL(0x90000000)
+#define MX53_PHYS_OFFSET UL(0x70000000)
#define MXC91231_PHYS_OFFSET UL(0x90000000)
#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
@@ -32,8 +34,12 @@
# define PHYS_OFFSET MX3x_PHYS_OFFSET
# elif defined CONFIG_ARCH_MXC91231
# define PHYS_OFFSET MXC91231_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX5
+# elif defined CONFIG_ARCH_MX50
+# define PHYS_OFFSET MX50_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX51
# define PHYS_OFFSET MX51_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX53
+# define PHYS_OFFSET MX53_PHYS_OFFSET
# endif
#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 641b246..75d9621 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -19,7 +19,6 @@
*/
#define MX1_IO_BASE_ADDR 0x00200000
#define MX1_IO_SIZE SZ_1M
-#define MX1_IO_BASE_ADDR_VIRT VMALLOC_END
#define MX1_CS0_PHYS 0x10000000
#define MX1_CS0_SIZE 0x02000000
@@ -66,6 +65,10 @@
#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR)
#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR)
#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO1_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO2_BASE_ADDR (0x1C100 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO3_BASE_ADDR (0x1C200 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO4_BASE_ADDR (0x1C300 + MX1_IO_BASE_ADDR)
#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR)
#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR)
#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR)
@@ -73,12 +76,12 @@
#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR)
/* macro to get at IO space when running virtually */
-#define MX1_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MX1_IO))
+#define MX1_IO_P2V(x) IMX_IO_P2V(x)
+#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x))
/* fixed interrput numbers */
#define MX1_INT_SOFTINT 0
-#define MX1_CSI_INT 6
+#define MX1_INT_CSI 6
#define MX1_DSPA_MAC_INT 7
#define MX1_DSPA_INT 8
#define MX1_COMP_INT 9
@@ -115,13 +118,13 @@
#define MX1_SSI_RX_INT 44
#define MX1_SSI_RX_ERR_INT 45
#define MX1_TOUCH_INT 46
-#define MX1_USBD_INT0 47
-#define MX1_USBD_INT1 48
-#define MX1_USBD_INT2 49
-#define MX1_USBD_INT3 50
-#define MX1_USBD_INT4 51
-#define MX1_USBD_INT5 52
-#define MX1_USBD_INT6 53
+#define MX1_INT_USBD0 47
+#define MX1_INT_USBD1 48
+#define MX1_INT_USBD2 49
+#define MX1_INT_USBD3 50
+#define MX1_INT_USBD4 51
+#define MX1_INT_USBD5 52
+#define MX1_INT_USBD6 53
#define MX1_BTSYS_INT 55
#define MX1_BTTIM_INT 56
#define MX1_BTWUI_INT 57
@@ -164,134 +167,6 @@
* to not break drivers/usb/gadget/imx_udc. Should go
* away after this driver uses the new name.
*/
-#define USBD_INT0 MX1_USBD_INT0
-
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define IMX_IO_PHYS MX1_IO_BASE_ADDR
-#define IMX_IO_SIZE MX1_IO_SIZE
-#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
-#define IMX_CS0_PHYS MX1_CS0_PHYS
-#define IMX_CS0_SIZE MX1_CS0_SIZE
-#define IMX_CS1_PHYS MX1_CS1_PHYS
-#define IMX_CS1_SIZE MX1_CS1_SIZE
-#define IMX_CS2_PHYS MX1_CS2_PHYS
-#define IMX_CS2_SIZE MX1_CS2_SIZE
-#define IMX_CS3_PHYS MX1_CS3_PHYS
-#define IMX_CS3_SIZE MX1_CS3_SIZE
-#define IMX_CS4_PHYS MX1_CS4_PHYS
-#define IMX_CS4_SIZE MX1_CS4_SIZE
-#define IMX_CS5_PHYS MX1_CS5_PHYS
-#define IMX_CS5_SIZE MX1_CS5_SIZE
-#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR
-#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR
-#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR
-#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR
-#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR
-#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR
-#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR
-#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR
-#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR
-#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR
-#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR
-#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR
-#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR
-#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR
-#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR
-#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR
-#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR
-#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR
-#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR
-#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR
-#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR
-#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR
-#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR
-#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR
-#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR
-#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR
-#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR
-#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR
-#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR
-#define IO_ADDRESS(x) MX1_IO_ADDRESS(x)
-#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
-#define INT_SOFTINT MX1_INT_SOFTINT
-#define CSI_INT MX1_CSI_INT
-#define DSPA_MAC_INT MX1_DSPA_MAC_INT
-#define DSPA_INT MX1_DSPA_INT
-#define COMP_INT MX1_COMP_INT
-#define MSHC_XINT MX1_MSHC_XINT
-#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA
-#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB
-#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC
-#define LCDC_INT MX1_LCDC_INT
-#define SIM_INT MX1_SIM_INT
-#define SIM_DATA_INT MX1_SIM_DATA_INT
-#define RTC_INT MX1_RTC_INT
-#define RTC_SAMINT MX1_RTC_SAMINT
-#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR
-#define UART2_MINT_RTS MX1_UART2_MINT_RTS
-#define UART2_MINT_DTR MX1_UART2_MINT_DTR
-#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC
-#define UART2_MINT_TX MX1_UART2_MINT_TX
-#define UART2_MINT_RX MX1_UART2_MINT_RX
-#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR
-#define UART1_MINT_RTS MX1_UART1_MINT_RTS
-#define UART1_MINT_DTR MX1_UART1_MINT_DTR
-#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC
-#define UART1_MINT_TX MX1_UART1_MINT_TX
-#define UART1_MINT_RX MX1_UART1_MINT_RX
-#define VOICE_DAC_INT MX1_VOICE_DAC_INT
-#define VOICE_ADC_INT MX1_VOICE_ADC_INT
-#define PEN_DATA_INT MX1_PEN_DATA_INT
-#define PWM_INT MX1_PWM_INT
-#define SDHC_INT MX1_SDHC_INT
-#define I2C_INT MX1_INT_I2C
-#define CSPI_INT MX1_CSPI_INT
-#define SSI_TX_INT MX1_SSI_TX_INT
-#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
-#define SSI_RX_INT MX1_SSI_RX_INT
-#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT
-#define TOUCH_INT MX1_TOUCH_INT
-#define USBD_INT1 MX1_USBD_INT1
-#define USBD_INT2 MX1_USBD_INT2
-#define USBD_INT3 MX1_USBD_INT3
-#define USBD_INT4 MX1_USBD_INT4
-#define USBD_INT5 MX1_USBD_INT5
-#define USBD_INT6 MX1_USBD_INT6
-#define BTSYS_INT MX1_BTSYS_INT
-#define BTTIM_INT MX1_BTTIM_INT
-#define BTWUI_INT MX1_BTWUI_INT
-#define TIM2_INT MX1_TIM2_INT
-#define TIM1_INT MX1_TIM1_INT
-#define DMA_ERR MX1_DMA_ERR
-#define DMA_INT MX1_DMA_INT
-#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD
-#define WDT_INT MX1_WDT_INT
-#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T
-#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R
-#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T
-#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R
-#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT
-#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R
-#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC
-#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT
-#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN
-#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC
-#define DMA_REQ_EXT MX1_DMA_REQ_EXT
-#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC
-#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R
-#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T
-#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T
-#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R
-#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC
-#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC
-#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x)
-#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R
-#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T
-#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T
-#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R
-#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T
-#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R
-#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */
+#define USBD_INT0 MX1_INT_USBD0
#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8bc5972..6cd049e 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -26,7 +26,6 @@
#define __MACH_MX21_H__
#define MX21_AIPI_BASE_ADDR 0x10000000
-#define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000
#define MX21_AIPI_SIZE SZ_1M
#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000)
#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000)
@@ -49,6 +48,12 @@
#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000)
#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000)
#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000)
+#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100)
+#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200)
+#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300)
+#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400)
+#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500)
#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000)
#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000)
#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000)
@@ -64,7 +69,6 @@
#define MX21_AVIC_BASE_ADDR 0x10040000
#define MX21_SAHB1_BASE_ADDR 0x80000000
-#define MX21_SAHB1_BASE_ADDR_VIRT 0xf4100000
#define MX21_SAHB1_SIZE SZ_1M
#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
@@ -82,7 +86,6 @@
/* NAND, SDRAM, WEIM etc controllers */
#define MX21_X_MEMC_BASE_ADDR 0xdf000000
-#define MX21_X_MEMC_BASE_ADDR_VIRT 0xf4200000
#define MX21_X_MEMC_SIZE SZ_256K
#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000)
@@ -92,10 +95,8 @@
#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
-#define MX21_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MX21_AIPI) ?: \
- IMX_IO_ADDRESS(x, MX21_SAHB1) ?: \
- IMX_IO_ADDRESS(x, MX21_X_MEMC))
+#define MX21_IO_P2V(x) IMX_IO_P2V(x)
+#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x))
/* fixed interrupt numbers */
#define MX21_INT_CSPI3 6
@@ -184,39 +185,4 @@
#define MX21_DMA_REQ_CSI_STAT 30
#define MX21_DMA_REQ_CSI_RX 31
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
-#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
-#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR
-#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR
-#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR
-#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR
-#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR
-#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR
-#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR
-#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT
-#define X_MEMC_SIZE MX21_X_MEMC_SIZE
-#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR
-#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR
-#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR
-#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR
-#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR
-#define MXC_INT_FIRI MX21_INT_FIRI
-#define MXC_INT_BMI MX21_INT_BMI
-#define MXC_INT_EMMAENC MX21_INT_EMMAENC
-#define MXC_INT_EMMADEC MX21_INT_EMMADEC
-#define MXC_INT_USBWKUP MX21_INT_USBWKUP
-#define MXC_INT_USBDMA MX21_INT_USBDMA
-#define MXC_INT_USBHOST MX21_INT_USBHOST
-#define MXC_INT_USBFUNC MX21_INT_USBFUNC
-#define MXC_INT_USBMNP MX21_INT_USBMNP
-#define MXC_INT_USBCTRL MX21_INT_USBCTRL
-#define MXC_INT_USBCTRL MX21_INT_USBCTRL
-#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
-#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
-#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
-#endif
-
#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index cf46a45..087cd7a 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -2,13 +2,10 @@
#define __MACH_MX25_H__
#define MX25_AIPS1_BASE_ADDR 0x43f00000
-#define MX25_AIPS1_BASE_ADDR_VIRT 0xfc000000
#define MX25_AIPS1_SIZE SZ_1M
#define MX25_AIPS2_BASE_ADDR 0x53f00000
-#define MX25_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX25_AIPS2_SIZE SZ_1M
#define MX25_AVIC_BASE_ADDR 0x68000000
-#define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX25_AVIC_SIZE SZ_1M
#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000)
@@ -21,20 +18,15 @@
#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000)
+#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000)
+#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000)
+#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000)
+#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000)
+#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000)
#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
-
-#define MX25_GPIO1_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
-#define MX25_GPIO2_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
-#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
-#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
-
-#define MX25_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MX25_AIPS1) ?: \
- IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \
- IMX_IO_ADDRESS(x, MX25_AVIC))
-
-#define MX25_AIPS1_IO_ADDRESS(x) \
- (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000)
#define MX25_UART1_BASE_ADDR 0x43f90000
#define MX25_UART2_BASE_ADDR 0x43f94000
@@ -55,9 +47,19 @@
#define MX25_LCDC_BASE_ADDR 0x53fbc000
#define MX25_KPP_BASE_ADDR 0x43fa8000
#define MX25_SDMA_BASE_ADDR 0x53fd4000
-#define MX25_OTG_BASE_ADDR 0x53ff4000
+#define MX25_USB_BASE_ADDR 0x53ff4000
+#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000)
+/*
+ * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
+ * for the host controller. Early documentation drafts specified 0x400 and
+ * Freescale internal sources confirm only the latter value to work.
+ */
+#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400)
#define MX25_CSI_BASE_ADDR 0x53ff8000
+#define MX25_IO_P2V(x) IMX_IO_P2V(x)
+#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
+
#define MX25_INT_CSPI3 0
#define MX25_INT_I2C1 3
#define MX25_INT_I2C2 4
@@ -69,18 +71,28 @@
#define MX25_INT_SSI1 12
#define MX25_INT_CSPI2 13
#define MX25_INT_CSPI1 14
+#define MX25_INT_GPIO3 16
#define MX25_INT_CSI 17
#define MX25_INT_UART3 18
+#define MX25_INT_GPIO4 23
#define MX25_INT_KPP 24
#define MX25_INT_DRYICE 25
+#define MX25_INT_PWM1 26
#define MX25_INT_UART2 32
#define MX25_INT_NFC 33
#define MX25_INT_SDMA 34
+#define MX25_INT_USB_HS 35
+#define MX25_INT_PWM2 36
+#define MX25_INT_USB_OTG 37
#define MX25_INT_LCDC 39
#define MX25_INT_UART5 40
+#define MX25_INT_PWM3 41
+#define MX25_INT_PWM4 42
#define MX25_INT_CAN1 43
#define MX25_INT_CAN2 44
#define MX25_INT_UART1 45
+#define MX25_INT_GPIO2 51
+#define MX25_INT_GPIO1 52
#define MX25_INT_FEC 57
#define MX25_DMA_REQ_SSI2_RX1 22
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 2237ba2..cbc43ad 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -29,7 +29,6 @@
#endif
#define MX27_AIPI_BASE_ADDR 0x10000000
-#define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000
#define MX27_AIPI_SIZE SZ_1M
#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000)
@@ -52,6 +51,12 @@
#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000)
#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000)
#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000)
+#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000)
+#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100)
+#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200)
+#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300)
+#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400)
+#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500)
#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000)
#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000)
#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000)
@@ -65,11 +70,13 @@
#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000)
#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000)
#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000)
-#define MX27_USBOTG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000)
-#define MX27_OTG_BASE_ADDR MX27_USBOTG_BASE_ADDR
+#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000)
+#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000)
+#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200)
+#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400)
#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000)
-#define MX27_EMMA_PP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000)
-#define MX27_EMMA_PRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400)
+#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000)
+#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400)
#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000)
#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800)
#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000)
@@ -87,7 +94,6 @@
#define MX27_ROMP_BASE_ADDR 0x10041000
#define MX27_SAHB1_BASE_ADDR 0x80000000
-#define MX27_SAHB1_BASE_ADDR_VIRT 0xf4100000
#define MX27_SAHB1_SIZE SZ_1M
#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000)
#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000)
@@ -105,7 +111,6 @@
/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
#define MX27_X_MEMC_BASE_ADDR 0xd8000000
-#define MX27_X_MEMC_BASE_ADDR_VIRT 0xf4200000
#define MX27_X_MEMC_SIZE SZ_1M
#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR)
#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000)
@@ -123,10 +128,8 @@
/* IRAM */
#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
-#define MX27_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MX27_AIPI) ?: \
- IMX_IO_ADDRESS(x, MX27_SAHB1) ?: \
- IMX_IO_ADDRESS(x, MX27_X_MEMC))
+#define MX27_IO_P2V(x) IMX_IO_P2V(x)
+#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
#ifndef __ASSEMBLER__
static inline void mx27_setup_weimcs(size_t cs,
@@ -192,9 +195,9 @@
#define MX27_INT_EMMAPRP 51
#define MX27_INT_EMMAPP 52
#define MX27_INT_VPU 53
-#define MX27_INT_USB1 54
-#define MX27_INT_USB2 55
-#define MX27_INT_USB3 56
+#define MX27_INT_USB_HS1 54
+#define MX27_INT_USB_HS2 55
+#define MX27_INT_USB_OTG 56
#define MX27_INT_SCC_SMN 57
#define MX27_INT_SCC_SCM 58
#define MX27_INT_SAHARA 59
@@ -241,82 +244,8 @@
#define MX27_DMA_REQ_SDHC3 36
#define MX27_DMA_REQ_NFC 37
-/* silicon revisions specific to i.MX27 */
-#define CHIP_REV_1_0 0x00
-#define CHIP_REV_2_0 0x01
-
#ifndef __ASSEMBLY__
extern int mx27_revision(void);
#endif
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
-#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
-#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR
-#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR
-#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR
-#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR
-#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR
-#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR
-#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR
-#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR
-#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR
-#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR
-#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR
-#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR
-#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR
-#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR
-#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR
-#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR
-#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR
-#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR
-#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR
-#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR
-#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR
-#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR
-#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR
-#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR
-#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR
-#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT
-#define X_MEMC_SIZE MX27_X_MEMC_SIZE
-#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR
-#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR
-#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR
-#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR
-#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR
-#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR
-#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR
-#define MXC_INT_I2C2 MX27_INT_I2C2
-#define MXC_INT_GPT6 MX27_INT_GPT6
-#define MXC_INT_GPT5 MX27_INT_GPT5
-#define MXC_INT_GPT4 MX27_INT_GPT4
-#define MXC_INT_RTIC MX27_INT_RTIC
-#define MXC_INT_SDHC MX27_INT_SDHC
-#define MXC_INT_SDHC3 MX27_INT_SDHC3
-#define MXC_INT_ATA MX27_INT_ATA
-#define MXC_INT_UART6 MX27_INT_UART6
-#define MXC_INT_UART5 MX27_INT_UART5
-#define MXC_INT_FEC MX27_INT_FEC
-#define MXC_INT_VPU MX27_INT_VPU
-#define MXC_INT_USB1 MX27_INT_USB1
-#define MXC_INT_USB2 MX27_INT_USB2
-#define MXC_INT_USB3 MX27_INT_USB3
-#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN
-#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM
-#define MXC_INT_SAHARA MX27_INT_SAHARA
-#define MXC_INT_IIM MX27_INT_IIM
-#define MXC_INT_CCM MX27_INT_CCM
-#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC
-#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX
-#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV
-#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX
-#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX
-#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX
-#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
-#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
-#define DMA_REQ_NFC MX27_DMA_REQ_NFC
-#endif
-
#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index afb895a..6d07839 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -27,7 +27,6 @@
/* Register offsets */
#define MX2x_AIPI_BASE_ADDR 0x10000000
-#define MX2x_AIPI_BASE_ADDR_VIRT 0xf4000000
#define MX2x_AIPI_SIZE SZ_1M
#define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000)
#define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000)
@@ -65,43 +64,9 @@
#define MX2x_AVIC_BASE_ADDR 0x10040000
#define MX2x_SAHB1_BASE_ADDR 0x80000000
-#define MX2x_SAHB1_BASE_ADDR_VIRT 0xf4100000
#define MX2x_SAHB1_SIZE SZ_1M
#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __force __iomem *) \
- (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
- AIPI_IO_ADDRESS(x) : \
- ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
- SAHB1_IO_ADDRESS(x) : \
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
- X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
-
-/* define the address mapping macros: in physical address order */
-#define AIPI_IO_ADDRESS(x) \
- (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x)
-
-#define SAHB1_IO_ADDRESS(x) \
- (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
/* fixed interrupt numbers */
#define MX2x_INT_CSPI3 6
#define MX2x_INT_GPIO 8
@@ -176,118 +141,4 @@
#define MX2x_DMA_REQ_CSI_STAT 30
#define MX2x_DMA_REQ_CSI_RX 31
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
-#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
-#define AIPI_SIZE MX2x_AIPI_SIZE
-#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR
-#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR
-#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR
-#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR
-#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR
-#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR
-#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR
-#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR
-#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR
-#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR
-#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR
-#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR
-#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR
-#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR
-#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR
-#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR
-#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR
-#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR
-#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR
-#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR
-#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR
-#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR
-#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR
-#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR
-#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR
-#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR
-#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR
-#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR
-#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR
-#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR
-#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR
-#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR
-#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR
-#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR
-#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT
-#define SAHB1_SIZE MX2x_SAHB1_SIZE
-#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR
-#define MXC_INT_CSPI3 MX2x_INT_CSPI3
-#define MXC_INT_GPIO MX2x_INT_GPIO
-#define MXC_INT_SDHC2 MX2x_INT_SDHC2
-#define MXC_INT_SDHC1 MX2x_INT_SDHC1
-#define MXC_INT_I2C MX2x_INT_I2C
-#define MXC_INT_SSI2 MX2x_INT_SSI2
-#define MXC_INT_SSI1 MX2x_INT_SSI1
-#define MXC_INT_CSPI2 MX2x_INT_CSPI2
-#define MXC_INT_CSPI1 MX2x_INT_CSPI1
-#define MXC_INT_UART4 MX2x_INT_UART4
-#define MXC_INT_UART3 MX2x_INT_UART3
-#define MXC_INT_UART2 MX2x_INT_UART2
-#define MXC_INT_UART1 MX2x_INT_UART1
-#define MXC_INT_KPP MX2x_INT_KPP
-#define MXC_INT_RTC MX2x_INT_RTC
-#define MXC_INT_PWM MX2x_INT_PWM
-#define MXC_INT_GPT3 MX2x_INT_GPT3
-#define MXC_INT_GPT2 MX2x_INT_GPT2
-#define MXC_INT_GPT1 MX2x_INT_GPT1
-#define MXC_INT_WDOG MX2x_INT_WDOG
-#define MXC_INT_PCMCIA MX2x_INT_PCMCIA
-#define MXC_INT_NANDFC MX2x_INT_NANDFC
-#define MXC_INT_CSI MX2x_INT_CSI
-#define MXC_INT_DMACH0 MX2x_INT_DMACH0
-#define MXC_INT_DMACH1 MX2x_INT_DMACH1
-#define MXC_INT_DMACH2 MX2x_INT_DMACH2
-#define MXC_INT_DMACH3 MX2x_INT_DMACH3
-#define MXC_INT_DMACH4 MX2x_INT_DMACH4
-#define MXC_INT_DMACH5 MX2x_INT_DMACH5
-#define MXC_INT_DMACH6 MX2x_INT_DMACH6
-#define MXC_INT_DMACH7 MX2x_INT_DMACH7
-#define MXC_INT_DMACH8 MX2x_INT_DMACH8
-#define MXC_INT_DMACH9 MX2x_INT_DMACH9
-#define MXC_INT_DMACH10 MX2x_INT_DMACH10
-#define MXC_INT_DMACH11 MX2x_INT_DMACH11
-#define MXC_INT_DMACH12 MX2x_INT_DMACH12
-#define MXC_INT_DMACH13 MX2x_INT_DMACH13
-#define MXC_INT_DMACH14 MX2x_INT_DMACH14
-#define MXC_INT_DMACH15 MX2x_INT_DMACH15
-#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP
-#define MXC_INT_EMMAPP MX2x_INT_EMMAPP
-#define MXC_INT_SLCDC MX2x_INT_SLCDC
-#define MXC_INT_LCDC MX2x_INT_LCDC
-#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX
-#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX
-#define DMA_REQ_EXT MX2x_DMA_REQ_EXT
-#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2
-#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1
-#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0
-#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0
-#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1
-#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1
-#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0
-#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0
-#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1
-#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1
-#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX
-#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX
-#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX
-#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX
-#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX
-#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX
-#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX
-#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX
-#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX
-#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX
-#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX
-#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
-#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
-#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
-#endif
-
#endif /* ifndef __MACH_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 61cfe82..79e7fc0 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -15,7 +15,6 @@
#define MX31_L2CC_SIZE SZ_1M
#define MX31_AIPS1_BASE_ADDR 0x43f00000
-#define MX31_AIPS1_BASE_ADDR_VIRT 0xfc000000
#define MX31_AIPS1_SIZE SZ_1M
#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000)
#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000)
@@ -25,7 +24,10 @@
#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
-#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000)
+#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200)
+#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400)
#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000)
#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000)
@@ -41,10 +43,9 @@
#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000)
#define MX31_SPBA0_BASE_ADDR 0x50000000
-#define MX31_SPBA0_BASE_ADDR_VIRT 0xfc100000
#define MX31_SPBA0_SIZE SZ_1M
-#define MX31_MMC_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000)
-#define MX31_MMC_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000)
+#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000)
+#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000)
#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000)
#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000)
#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000)
@@ -55,7 +56,6 @@
#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000)
#define MX31_AIPS2_BASE_ADDR 0x53f00000
-#define MX31_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX31_AIPS2_SIZE SZ_1M
#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000)
#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000)
@@ -84,7 +84,6 @@
#define MX31_ROMP_SIZE SZ_1M
#define MX31_AVIC_BASE_ADDR 0x68000000
-#define MX31_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX31_AVIC_SIZE SZ_1M
#define MX31_IPU_MEM_BASE_ADDR 0x70000000
@@ -97,15 +96,14 @@
#define MX31_CS3_BASE_ADDR 0xb2000000
#define MX31_CS4_BASE_ADDR 0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX31_CS4_BASE_ADDR_VIRT 0xf6000000
#define MX31_CS4_SIZE SZ_32M
#define MX31_CS5_BASE_ADDR 0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX31_CS5_BASE_ADDR_VIRT 0xf8000000
#define MX31_CS5_SIZE SZ_32M
#define MX31_X_MEMC_BASE_ADDR 0xb8000000
-#define MX31_X_MEMC_BASE_ADDR_VIRT 0xfc320000
#define MX31_X_MEMC_SIZE SZ_64K
#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000)
#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000)
@@ -121,12 +119,8 @@
#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
-#define MX31_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MX31_AIPS1) ?: \
- IMX_IO_ADDRESS(x, MX31_AIPS2) ?: \
- IMX_IO_ADDRESS(x, MX31_AVIC) ?: \
- IMX_IO_ADDRESS(x, MX31_X_MEMC) ?: \
- IMX_IO_ADDRESS(x, MX31_SPBA0))
+#define MX31_IO_P2V(x) IMX_IO_P2V(x)
+#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
#ifndef __ASSEMBLER__
static inline void mx31_setup_weimcs(size_t cs,
@@ -143,8 +137,8 @@
#define MX31_INT_MPEG4_ENCODER 5
#define MX31_INT_RTIC 6
#define MX31_INT_FIRI 7
-#define MX31_INT_MMC_SDHC2 8
-#define MX31_INT_MMC_SDHC1 9
+#define MX31_INT_SDHC2 8
+#define MX31_INT_SDHC1 9
#define MX31_INT_I2C1 10
#define MX31_INT_SSI2 11
#define MX31_INT_SSI1 12
@@ -170,10 +164,9 @@
#define MX31_INT_UART2 32
#define MX31_INT_NFC 33
#define MX31_INT_SDMA 34
-#define MX31_INT_USB1 35
-#define MX31_INT_USB2 36
-#define MX31_INT_USB3 37
-#define MX31_INT_USB4 38
+#define MX31_INT_USB_HS1 35
+#define MX31_INT_USB_HS2 36
+#define MX31_INT_USB_OTG 37
#define MX31_INT_MSHC1 39
#define MX31_INT_MSHC2 40
#define MX31_INT_IPU_ERR 41
@@ -197,6 +190,8 @@
#define MX31_INT_EXT_WDOG 62
#define MX31_INT_EXT_TV 63
+#define MX31_DMA_REQ_SDHC1 20
+#define MX31_DMA_REQ_SDHC2 21
#define MX31_DMA_REQ_SSI2_RX1 22
#define MX31_DMA_REQ_SSI2_TX1 23
#define MX31_DMA_REQ_SSI2_RX0 24
@@ -208,52 +203,4 @@
#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */
-/* silicon revisions specific to i.MX31 */
-#define MX31_CHIP_REV_1_0 0x10
-#define MX31_CHIP_REV_1_1 0x11
-#define MX31_CHIP_REV_1_2 0x12
-#define MX31_CHIP_REV_1_3 0x13
-#define MX31_CHIP_REV_2_0 0x20
-#define MX31_CHIP_REV_2_1 0x21
-#define MX31_CHIP_REV_2_2 0x22
-#define MX31_CHIP_REV_2_3 0x23
-#define MX31_CHIP_REV_3_0 0x30
-#define MX31_CHIP_REV_3_1 0x31
-#define MX31_CHIP_REV_3_2 0x32
-
-#define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0
-#define MX31_SYSTEM_REV_NUM 3
-
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
-#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
-#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR
-#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR
-#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR
-#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR
-#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
-#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR
-#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR
-#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR
-#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR
-#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
-#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
-#define MXC_INT_FIRI MX31_INT_FIRI
-#define MXC_INT_MBX MX31_INT_MBX
-#define MXC_INT_CSPI3 MX31_INT_CSPI3
-#define MXC_INT_SIM2 MX31_INT_SIM2
-#define MXC_INT_SIM1 MX31_INT_SIM1
-#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS
-#define MXC_INT_USB1 MX31_INT_USB1
-#define MXC_INT_USB2 MX31_INT_USB2
-#define MXC_INT_USB3 MX31_INT_USB3
-#define MXC_INT_USB4 MX31_INT_USB4
-#define MXC_INT_MSHC2 MX31_INT_MSHC2
-#define MXC_INT_UART4 MX31_INT_UART4
-#define MXC_INT_UART5 MX31_INT_UART5
-#define MXC_INT_CCM MX31_INT_CCM
-#define MXC_INT_PCMCIA MX31_INT_PCMCIA
-#endif
-
#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6267cff..d13dbfe 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -11,7 +11,6 @@
#define MX35_L2CC_SIZE SZ_1M
#define MX35_AIPS1_BASE_ADDR 0x43f00000
-#define MX35_AIPS1_BASE_ADDR_VIRT 0xfc000000
#define MX35_AIPS1_SIZE SZ_1M
#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000)
#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000)
@@ -33,7 +32,6 @@
#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000)
#define MX35_SPBA0_BASE_ADDR 0x50000000
-#define MX35_SPBA0_BASE_ADDR_VIRT 0xfc100000
#define MX35_SPBA0_SIZE SZ_1M
#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
@@ -44,7 +42,6 @@
#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
#define MX35_AIPS2_BASE_ADDR 0x53f00000
-#define MX35_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX35_AIPS2_SIZE SZ_1M
#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000)
#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000)
@@ -68,15 +65,19 @@
#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
-
-#define MX35_OTG_BASE_ADDR 0x53ff4000
+#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000)
+#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000)
+/*
+ * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
+ * HS. When host support was implemented only a preliminary document was
+ * available, which told 0x400. This works fine.
+ */
+#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400)
#define MX35_ROMP_BASE_ADDR 0x60000000
-#define MX35_ROMP_BASE_ADDR_VIRT 0xfc500000
#define MX35_ROMP_SIZE SZ_1M
#define MX35_AVIC_BASE_ADDR 0x68000000
-#define MX35_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX35_AVIC_SIZE SZ_1M
/*
@@ -92,18 +93,17 @@
#define MX35_CS3_BASE_ADDR 0xb2000000
#define MX35_CS4_BASE_ADDR 0xb4000000
-#define MX35_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000
#define MX35_CS4_SIZE SZ_32M
#define MX35_CS5_BASE_ADDR 0xb6000000
-#define MX35_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000
#define MX35_CS5_SIZE SZ_32M
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define MX35_X_MEMC_BASE_ADDR 0xb8000000
-#define MX35_X_MEMC_BASE_ADDR_VIRT 0xfc320000
#define MX35_X_MEMC_SIZE SZ_64K
#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000)
#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000)
@@ -114,12 +114,8 @@
#define MX35_NFC_BASE_ADDR 0xbb000000
#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
-#define MX35_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MX35_AIPS1) ?: \
- IMX_IO_ADDRESS(x, MX35_AIPS2) ?: \
- IMX_IO_ADDRESS(x, MX35_AVIC) ?: \
- IMX_IO_ADDRESS(x, MX35_X_MEMC) ?: \
- IMX_IO_ADDRESS(x, MX35_SPBA0))
+#define MX35_IO_P2V(x) IMX_IO_P2V(x)
+#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x))
/*
* Interrupt numbers
@@ -153,8 +149,8 @@
#define MX35_INT_UART2 32
#define MX35_INT_NFC 33
#define MX35_INT_SDMA 34
-#define MX35_INT_USBHS 35
-#define MX35_INT_USBOTG 37
+#define MX35_INT_USB_HS 35
+#define MX35_INT_USB_OTG 37
#define MX35_INT_MSHC1 39
#define MX35_INT_ESAI 40
#define MX35_INT_IPU_ERR 41
@@ -190,23 +186,4 @@
#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */
-#define MX35_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0
-#define MX35_SYSTEM_REV_NUM 3
-
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
-#define MXC_INT_OWIRE MX35_INT_OWIRE
-#define MXC_INT_GPU2D MX35_INT_GPU2D
-#define MXC_INT_ASRC MX35_INT_ASRC
-#define MXC_INT_USBHS MX35_INT_USBHS
-#define MXC_INT_USBOTG MX35_INT_USBOTG
-#define MXC_INT_ESAI MX35_INT_ESAI
-#define MXC_INT_CAN1 MX35_INT_CAN1
-#define MXC_INT_CAN2 MX35_INT_CAN2
-#define MXC_INT_MLB MX35_INT_MLB
-#define MXC_INT_SPDIF MX35_INT_SPDIF
-#define MXC_INT_FEC MX35_INT_FEC
-#endif
-
#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index d1bd26d..388a407 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -44,7 +44,6 @@
* AIPS 1
*/
#define MX3x_AIPS1_BASE_ADDR 0x43f00000
-#define MX3x_AIPS1_BASE_ADDR_VIRT 0xfc000000
#define MX3x_AIPS1_SIZE SZ_1M
#define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000)
#define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000)
@@ -69,7 +68,6 @@
* SPBA global module enabled #0
*/
#define MX3x_SPBA0_BASE_ADDR 0x50000000
-#define MX3x_SPBA0_BASE_ADDR_VIRT 0xfc100000
#define MX3x_SPBA0_SIZE SZ_1M
#define MX3x_UART3_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x0c000)
#define MX3x_CSPI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x10000)
@@ -82,7 +80,6 @@
* AIPS 2
*/
#define MX3x_AIPS2_BASE_ADDR 0x53f00000
-#define MX3x_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX3x_AIPS2_SIZE SZ_1M
#define MX3x_CCM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x80000)
#define MX3x_GPT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x90000)
@@ -105,11 +102,9 @@
* ROMP and AVIC
*/
#define MX3x_ROMP_BASE_ADDR 0x60000000
-#define MX3x_ROMP_BASE_ADDR_VIRT 0xfc500000
#define MX3x_ROMP_SIZE SZ_1M
#define MX3x_AVIC_BASE_ADDR 0x68000000
-#define MX3x_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX3x_AVIC_SIZE SZ_1M
/*
@@ -125,18 +120,17 @@
#define MX3x_CS3_BASE_ADDR 0xb2000000
#define MX3x_CS4_BASE_ADDR 0xb4000000
-#define MX3x_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX3x_CS4_BASE_ADDR_VIRT 0xf6000000
#define MX3x_CS4_SIZE SZ_32M
#define MX3x_CS5_BASE_ADDR 0xb6000000
-#define MX3x_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX3x_CS5_BASE_ADDR_VIRT 0xf8000000
#define MX3x_CS5_SIZE SZ_32M
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define MX3x_X_MEMC_BASE_ADDR 0xb8000000
-#define MX3x_X_MEMC_BASE_ADDR_VIRT 0xfc320000
#define MX3x_X_MEMC_SIZE SZ_64K
#define MX3x_ESDCTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x1000)
#define MX3x_WEIM_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x2000)
@@ -146,56 +140,6 @@
#define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __force __iomem *) \
- (((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
- ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
- ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
- ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
- ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
- ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
- 0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-#define L2CC_IO_ADDRESS(x) \
- (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x) \
- (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x) \
- (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x) \
- (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x) \
- (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x) \
- (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define CS5_IO_ADDRESS(x) \
- (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
/*
* Interrupt numbers
*/
@@ -240,22 +184,6 @@
#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */
-/* silicon revisions specific to i.MX31 and i.MX35 */
-#define MX3x_CHIP_REV_1_0 0x10
-#define MX3x_CHIP_REV_1_1 0x11
-#define MX3x_CHIP_REV_1_2 0x12
-#define MX3x_CHIP_REV_1_3 0x13
-#define MX3x_CHIP_REV_2_0 0x20
-#define MX3x_CHIP_REV_2_1 0x21
-#define MX3x_CHIP_REV_2_2 0x22
-#define MX3x_CHIP_REV_2_3 0x23
-#define MX3x_CHIP_REV_3_0 0x30
-#define MX3x_CHIP_REV_3_1 0x31
-#define MX3x_CHIP_REV_3_2 0x32
-
-#define MX3x_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0
-#define MX3x_SYSTEM_REV_NUM 3
-
/* Mandatory defines used globally */
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
@@ -277,126 +205,4 @@
}
#endif
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
-#define L2CC_SIZE MX3x_L2CC_SIZE
-#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR
-#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT
-#define AIPS1_SIZE MX3x_AIPS1_SIZE
-#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR
-#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR
-#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR
-#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR
-#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR
-#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR
-#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR
-#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR
-#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR
-#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR
-#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR
-#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR
-#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR
-#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR
-#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR
-#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR
-#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR
-#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR
-#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR
-#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT
-#define SPBA0_SIZE MX3x_SPBA0_SIZE
-#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR
-#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR
-#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR
-#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR
-#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR
-#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR
-#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR
-#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT
-#define AIPS2_SIZE MX3x_AIPS2_SIZE
-#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR
-#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR
-#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR
-#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR
-#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR
-#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR
-#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR
-#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR
-#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR
-#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR
-#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR
-#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR
-#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR
-#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR
-#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR
-#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR
-#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR
-#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT
-#define ROMP_SIZE MX3x_ROMP_SIZE
-#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR
-#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT
-#define AVIC_SIZE MX3x_AVIC_SIZE
-#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR
-#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR
-#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR
-#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR
-#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR
-#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR
-#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR
-#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR
-#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT
-#define CS4_SIZE MX3x_CS4_SIZE
-#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR
-#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT
-#define CS5_SIZE MX3x_CS5_SIZE
-#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT
-#define X_MEMC_SIZE MX3x_X_MEMC_SIZE
-#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR
-#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR
-#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR
-#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
-#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR
-#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR
-#define MXC_INT_I2C3 MX3x_INT_I2C3
-#define MXC_INT_I2C2 MX3x_INT_I2C2
-#define MXC_INT_RTIC MX3x_INT_RTIC
-#define MXC_INT_I2C MX3x_INT_I2C
-#define MXC_INT_CSPI2 MX3x_INT_CSPI2
-#define MXC_INT_CSPI1 MX3x_INT_CSPI1
-#define MXC_INT_ATA MX3x_INT_ATA
-#define MXC_INT_UART3 MX3x_INT_UART3
-#define MXC_INT_IIM MX3x_INT_IIM
-#define MXC_INT_RNGA MX3x_INT_RNGA
-#define MXC_INT_EVTMON MX3x_INT_EVTMON
-#define MXC_INT_KPP MX3x_INT_KPP
-#define MXC_INT_RTC MX3x_INT_RTC
-#define MXC_INT_PWM MX3x_INT_PWM
-#define MXC_INT_EPIT2 MX3x_INT_EPIT2
-#define MXC_INT_EPIT1 MX3x_INT_EPIT1
-#define MXC_INT_GPT MX3x_INT_GPT
-#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL
-#define MXC_INT_UART2 MX3x_INT_UART2
-#define MXC_INT_NANDFC MX3x_INT_NANDFC
-#define MXC_INT_SDMA MX3x_INT_SDMA
-#define MXC_INT_MSHC1 MX3x_INT_MSHC1
-#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR
-#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN
-#define MXC_INT_UART1 MX3x_INT_UART1
-#define MXC_INT_ECT MX3x_INT_ECT
-#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM
-#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN
-#define MXC_INT_GPIO2 MX3x_INT_GPIO2
-#define MXC_INT_GPIO1 MX3x_INT_GPIO1
-#define MXC_INT_WDOG MX3x_INT_WDOG
-#define MXC_INT_GPIO3 MX3x_INT_GPIO3
-#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER
-#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER
-#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60
-#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61
-#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
-#define MXC_INT_EXT_TV MX3x_INT_EXT_TV
-#define PROD_SIGNATURE MX3x_PROD_SIGNATURE
-#endif
-
#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h
new file mode 100644
index 0000000..aaec2a6
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx50.h
@@ -0,0 +1,285 @@
+#ifndef __MACH_MX50_H__
+#define __MACH_MX50_H__
+
+/*
+ * IROM
+ */
+#define MX50_IROM_BASE_ADDR 0x0
+#define MX50_IROM_SIZE SZ_64K
+
+/* TZIC */
+#define MX50_TZIC_BASE_ADDR 0x0fffc000
+#define MX50_TZIC_SIZE SZ_16K
+
+/*
+ * IRAM
+ */
+#define MX50_IRAM_BASE_ADDR 0xf8000000 /* internal ram */
+#define MX50_IRAM_PARTITIONS 16
+#define MX50_IRAM_SIZE (MX50_IRAM_PARTITIONS * SZ_8K) /* 128KB */
+
+/*
+ * Databahn
+ */
+#define MX50_DATABAHN_BASE_ADDR 0x14000000
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX50_GPU2D_BASE_ADDR 0x20000000
+
+#define MX50_DEBUG_BASE_ADDR 0x40000000
+#define MX50_DEBUG_SIZE SZ_1M
+#define MX50_ETB_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00001000)
+#define MX50_ETM_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00002000)
+#define MX50_TPIU_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00003000)
+#define MX50_CTI0_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00004000)
+#define MX50_CTI1_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00005000)
+#define MX50_CTI2_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00006000)
+#define MX50_CTI3_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00007000)
+#define MX50_CORTEX_DBG_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00008000)
+
+#define MX50_APBHDMA_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01000000)
+#define MX50_OCOTP_CTRL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01002000)
+#define MX50_DIGCTL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01004000)
+#define MX50_GPMI_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01006000)
+#define MX50_BCH_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01008000)
+#define MX50_ELCDIF_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100a000)
+#define MX50_EPXP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100c000)
+#define MX50_DCP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100e000)
+#define MX50_EPDC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01010000)
+#define MX50_QOSC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01012000)
+#define MX50_PERFMON_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01014000)
+#define MX50_SSP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01016000)
+#define MX50_ANATOP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01018000)
+#define MX50_NIC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x08000000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX50_SPBA0_BASE_ADDR 0x50000000
+#define MX50_SPBA0_SIZE SZ_1M
+
+#define MX50_MMC_SDHC1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00004000)
+#define MX50_MMC_SDHC2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00008000)
+#define MX50_UART3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x0000c000)
+#define MX50_CSPI1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00010000)
+#define MX50_SSI2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00014000)
+#define MX50_MMC_SDHC3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00020000)
+#define MX50_MMC_SDHC4_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00024000)
+
+/*
+ * AIPS 1
+ */
+#define MX50_AIPS1_BASE_ADDR 0x53f00000
+#define MX50_AIPS1_SIZE SZ_1M
+
+#define MX50_OTG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00080000)
+#define MX50_GPIO1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00084000)
+#define MX50_GPIO2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00088000)
+#define MX50_GPIO3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x0008c000)
+#define MX50_GPIO4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00090000)
+#define MX50_KPP_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00094000)
+#define MX50_WDOG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00098000)
+#define MX50_GPT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a0000)
+#define MX50_SRTC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a4000)
+#define MX50_IOMUXC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a8000)
+#define MX50_EPIT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ac000)
+#define MX50_PWM1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b4000)
+#define MX50_PWM2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b8000)
+#define MX50_UART1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000bc000)
+#define MX50_UART2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000c0000)
+#define MX50_SRC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d0000)
+#define MX50_CCM_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d4000)
+#define MX50_GPC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d8000)
+#define MX50_GPIO5_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000dc000)
+#define MX50_GPIO6_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000e0000)
+#define MX50_I2C3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ec000)
+#define MX50_UART4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f0000)
+
+#define MX50_MSHC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f4000)
+#define MX50_RNGB_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f8000)
+
+/*
+ * AIPS 2
+ */
+#define MX50_AIPS2_BASE_ADDR 0x63f00000
+#define MX50_AIPS2_SIZE SZ_1M
+
+#define MX50_PLL1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00080000)
+#define MX50_PLL2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00084000)
+#define MX50_PLL3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00088000)
+#define MX50_UART5_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00090000)
+#define MX50_AHBMAX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00094000)
+#define MX50_ARM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a0000)
+#define MX50_OWIRE_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a4000)
+#define MX50_CSPI2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ac000)
+#define MX50_SDMA_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b0000)
+#define MX50_ROMCP_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b8000)
+#define MX50_CSPI3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c0000)
+#define MX50_I2C2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c4000)
+#define MX50_I2C1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c8000)
+#define MX50_SSI1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000cc000)
+#define MX50_AUDMUX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d0000)
+#define MX50_WEIM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d8000)
+#define MX50_FEC_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ec000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX50_CSD0_BASE_ADDR 0x70000000
+#define MX50_CSD1_BASE_ADDR 0xb0000000
+#define MX50_CS0_BASE_ADDR 0xf0000000
+
+#define MX50_IO_P2V(x) IMX_IO_P2V(x)
+#define MX50_IO_ADDRESS(x) IOMEM(MX50_IO_P2V(x))
+
+/*
+ * defines for SPBA modules
+ */
+#define MX50_SPBA_SDHC1 0x04
+#define MX50_SPBA_SDHC2 0x08
+#define MX50_SPBA_UART3 0x0c
+#define MX50_SPBA_CSPI1 0x10
+#define MX50_SPBA_SSI2 0x14
+#define MX50_SPBA_SDHC3 0x20
+#define MX50_SPBA_SDHC4 0x24
+#define MX50_SPBA_SPDIF 0x28
+#define MX50_SPBA_ATA 0x30
+#define MX50_SPBA_SLIM 0x34
+#define MX50_SPBA_HSI2C 0x38
+#define MX50_SPBA_CTRL 0x3c
+
+/*
+ * DMA request assignments
+ */
+#define MX50_DMA_REQ_GPC 1
+#define MX50_DMA_REQ_ATA_UART4_RX 2
+#define MX50_DMA_REQ_ATA_UART4_TX 3
+#define MX50_DMA_REQ_CSPI1_RX 6
+#define MX50_DMA_REQ_CSPI1_TX 7
+#define MX50_DMA_REQ_CSPI2_RX 8
+#define MX50_DMA_REQ_CSPI2_TX 9
+#define MX50_DMA_REQ_I2C3_SDHC3 10
+#define MX50_DMA_REQ_SDHC4 11
+#define MX50_DMA_REQ_UART2_FIRI_RX 12
+#define MX50_DMA_REQ_UART2_FIRI_TX 13
+#define MX50_DMA_REQ_EXT0 14
+#define MX50_DMA_REQ_EXT1 15
+#define MX50_DMA_REQ_UART5_RX 16
+#define MX50_DMA_REQ_UART5_TX 17
+#define MX50_DMA_REQ_UART1_RX 18
+#define MX50_DMA_REQ_UART1_TX 19
+#define MX50_DMA_REQ_I2C1_SDHC1 20
+#define MX50_DMA_REQ_I2C2_SDHC2 21
+#define MX50_DMA_REQ_SSI2_RX2 22
+#define MX50_DMA_REQ_SSI2_TX2 23
+#define MX50_DMA_REQ_SSI2_RX1 24
+#define MX50_DMA_REQ_SSI2_TX1 25
+#define MX50_DMA_REQ_SSI1_RX2 26
+#define MX50_DMA_REQ_SSI1_TX2 27
+#define MX50_DMA_REQ_SSI1_RX1 28
+#define MX50_DMA_REQ_SSI1_TX1 29
+#define MX50_DMA_REQ_CSPI_RX 38
+#define MX50_DMA_REQ_CSPI_TX 39
+#define MX50_DMA_REQ_UART3_RX 42
+#define MX50_DMA_REQ_UART3_TX 43
+
+/*
+ * Interrupt numbers
+ */
+#define MX50_INT_MMC_SDHC1 1
+#define MX50_INT_MMC_SDHC2 2
+#define MX50_INT_MMC_SDHC3 3
+#define MX50_INT_MMC_SDHC4 4
+#define MX50_INT_DAP 5
+#define MX50_INT_SDMA 6
+#define MX50_INT_IOMUX 7
+#define MX50_INT_UART4 13
+#define MX50_INT_USB_H1 14
+#define MX50_INT_USB_OTG 18
+#define MX50_INT_DATABAHN 19
+#define MX50_INT_ELCDIF 20
+#define MX50_INT_EPXP 21
+#define MX50_INT_SRTC_NTZ 24
+#define MX50_INT_SRTC_TZ 25
+#define MX50_INT_EPDC 27
+#define MX50_INT_NIC 28
+#define MX50_INT_SSI1 29
+#define MX50_INT_SSI2 30
+#define MX50_INT_UART1 31
+#define MX50_INT_UART2 32
+#define MX50_INT_UART3 33
+#define MX50_INT_RESV34 34
+#define MX50_INT_RESV35 35
+#define MX50_INT_CSPI1 36
+#define MX50_INT_CSPI2 37
+#define MX50_INT_CSPI 38
+#define MX50_INT_GPT 39
+#define MX50_INT_EPIT1 40
+#define MX50_INT_GPIO1_INT7 42
+#define MX50_INT_GPIO1_INT6 43
+#define MX50_INT_GPIO1_INT5 44
+#define MX50_INT_GPIO1_INT4 45
+#define MX50_INT_GPIO1_INT3 46
+#define MX50_INT_GPIO1_INT2 47
+#define MX50_INT_GPIO1_INT1 48
+#define MX50_INT_GPIO1_INT0 49
+#define MX50_INT_GPIO1_LOW 50
+#define MX50_INT_GPIO1_HIGH 51
+#define MX50_INT_GPIO2_LOW 52
+#define MX50_INT_GPIO2_HIGH 53
+#define MX50_INT_GPIO3_LOW 54
+#define MX50_INT_GPIO3_HIGH 55
+#define MX50_INT_GPIO4_LOW 56
+#define MX50_INT_GPIO4_HIGH 57
+#define MX50_INT_WDOG1 58
+#define MX50_INT_KPP 60
+#define MX50_INT_PWM1 61
+#define MX50_INT_I2C1 62
+#define MX50_INT_I2C2 63
+#define MX50_INT_I2C3 64
+#define MX50_INT_RESV65 65
+#define MX50_INT_DCDC 66
+#define MX50_INT_THERMAL_ALARM 67
+#define MX50_INT_ANA3 68
+#define MX50_INT_ANA4 69
+#define MX50_INT_CCM1 71
+#define MX50_INT_CCM2 72
+#define MX50_INT_GPC1 73
+#define MX50_INT_GPC2 74
+#define MX50_INT_SRC 75
+#define MX50_INT_NM 76
+#define MX50_INT_PMU 77
+#define MX50_INT_CTI_IRQ 78
+#define MX50_INT_CTI1_TG0 79
+#define MX50_INT_CTI1_TG1 80
+#define MX50_INT_GPU2_IRQ 84
+#define MX50_INT_GPU2_BUSY 85
+#define MX50_INT_UART5 86
+#define MX50_INT_FEC 87
+#define MX50_INT_OWIRE 88
+#define MX50_INT_CTI1_TG2 89
+#define MX50_INT_SJC 90
+#define MX50_INT_DCP_CHAN1_3 91
+#define MX50_INT_DCP_CHAN0 92
+#define MX50_INT_PWM2 94
+#define MX50_INT_RNGB 97
+#define MX50_INT_CTI1_TG3 98
+#define MX50_INT_RAWNAND_BCH 100
+#define MX50_INT_RAWNAND_GPMI 102
+#define MX50_INT_GPIO5_LOW 103
+#define MX50_INT_GPIO5_HIGH 104
+#define MX50_INT_GPIO6_LOW 105
+#define MX50_INT_GPIO6_HIGH 106
+#define MX50_INT_MSHC 109
+#define MX50_INT_APBHDMA_CHAN0 110
+#define MX50_INT_APBHDMA_CHAN1 111
+#define MX50_INT_APBHDMA_CHAN2 112
+#define MX50_INT_APBHDMA_CHAN3 113
+#define MX50_INT_APBHDMA_CHAN4 114
+#define MX50_INT_APBHDMA_CHAN5 115
+#define MX50_INT_APBHDMA_CHAN6 116
+#define MX50_INT_APBHDMA_CHAN7 117
+
+#endif /* ifndef __MACH_MX50_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 2af7a10..873807f 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -2,31 +2,6 @@
#define __MACH_MX51_H__
/*
- * MX51 memory map:
- *
- *
- * Virt Phys Size What
- * ---------------------------------------------------------------------------
- * fa3e0000 1ffe0000 128K IRAM (SCCv2 RAM)
- * 30000000 256M GPU
- * 40000000 512M IPU
- * fa200000 60000000 1M DEBUG
- * fb100000 70000000 1M SPBA 0
- * fb000000 73f00000 1M AIPS 1
- * fb200000 83f00000 1M AIPS 2
- * 8fffc000 16K TZIC (interrupt controller)
- * 90000000 256M CSD0 SDRAM/DDR
- * a0000000 256M CSD1 SDRAM/DDR
- * b0000000 128M CS0 Flash
- * b8000000 128M CS1 Flash
- * c0000000 128M CS2 Flash
- * c8000000 64M CS3 Flash
- * cc000000 32M CS4 SRAM
- * ce000000 32M CS5 SRAM
- * cfff0000 64K NFC (NAND Flash AXI)
- */
-
-/*
* IROM
*/
#define MX51_IROM_BASE_ADDR 0x0
@@ -36,7 +11,6 @@
* IRAM
*/
#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */
-#define MX51_IRAM_BASE_ADDR_VIRT 0xfa3e0000
#define MX51_IRAM_PARTITIONS 16
#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
@@ -45,7 +19,6 @@
#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
#define MX51_DEBUG_BASE_ADDR 0x60000000
-#define MX51_DEBUG_BASE_ADDR_VIRT 0xfa200000
#define MX51_DEBUG_SIZE SZ_1M
#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000)
@@ -61,7 +34,6 @@
* SPBA global module enabled #0
*/
#define MX51_SPBA0_BASE_ADDR 0x70000000
-#define MX51_SPBA0_BASE_ADDR_VIRT 0xfb100000
#define MX51_SPBA0_SIZE SZ_1M
#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000)
@@ -81,7 +53,6 @@
* AIPS 1
*/
#define MX51_AIPS1_BASE_ADDR 0x73f00000
-#define MX51_AIPS1_BASE_ADDR_VIRT 0xfb000000
#define MX51_AIPS1_SIZE SZ_1M
#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
@@ -90,7 +61,7 @@
#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000)
#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000)
-#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000)
+#define MX51_WDOG1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000)
#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000)
#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000)
#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000)
@@ -109,7 +80,6 @@
* AIPS 2
*/
#define MX51_AIPS2_BASE_ADDR 0x83f00000
-#define MX51_AIPS2_BASE_ADDR_VIRT 0xfb200000
#define MX51_AIPS2_SIZE SZ_1M
#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000)
@@ -139,7 +109,7 @@
#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000)
#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000)
#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000)
-#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000)
+#define MX51_SSI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000)
#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000)
#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000)
#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000)
@@ -163,16 +133,8 @@
#define MX51_GPU2D_BASE_ADDR 0xd0000000
#define MX51_TZIC_BASE_ADDR 0xe0000000
-#define MX51_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MX51_IRAM) ?: \
- IMX_IO_ADDRESS(x, MX51_DEBUG) ?: \
- IMX_IO_ADDRESS(x, MX51_SPBA0) ?: \
- IMX_IO_ADDRESS(x, MX51_AIPS1) ?: \
- IMX_IO_ADDRESS(x, MX51_AIPS2))
-
-/* This is currently used in <mach/debug-macro.S>, but should go away */
-#define MX51_AIPS1_IO_ADDRESS(x) \
- (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
+#define MX51_IO_P2V(x) IMX_IO_P2V(x)
+#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
/*
* defines for SPBA modules
@@ -261,9 +223,9 @@
#define MX51_DMA_REQ_EMI_WR 32
#define MX51_DMA_REQ_CTI2_1 33
#define MX51_DMA_REQ_EPIT2 34
-#define MX51_DMA_REQ_SSI3_RX2 35
+#define MX51_DMA_REQ_SSI3_RX1 35
#define MX51_DMA_REQ_IPU 36
-#define MX51_DMA_REQ_SSI3_TX2 37
+#define MX51_DMA_REQ_SSI3_TX1 37
#define MX51_DMA_REQ_CSPI_RX 38
#define MX51_DMA_REQ_CSPI_TX 39
#define MX51_DMA_REQ_SDHC3 40
@@ -272,8 +234,8 @@
#define MX51_DMA_REQ_UART3_RX 43
#define MX51_DMA_REQ_UART3_TX 44
#define MX51_DMA_REQ_SPDIF 45
-#define MX51_DMA_REQ_SSI3_RX1 46
-#define MX51_DMA_REQ_SSI3_TX1 47
+#define MX51_DMA_REQ_SSI3_RX0 46
+#define MX51_DMA_REQ_SSI3_TX0 47
/*
* Interrupt numbers
@@ -289,8 +251,8 @@
#define MX51_MXC_INT_IOMUX 7
#define MX51_INT_NFC 8
#define MX51_MXC_INT_VPU 9
-#define MX51_MXC_INT_IPU_ERR 10
-#define MX51_MXC_INT_IPU_SYN 11
+#define MX51_INT_IPU_ERR 10
+#define MX51_INT_IPU_SYN 11
#define MX51_MXC_INT_GPU 12
#define MX51_MXC_INT_RESV13 13
#define MX51_MXC_INT_USB_H1 14
@@ -375,7 +337,7 @@
#define MX51_MXC_INT_FIRI 93
#define MX51_MXC_INT_PWM2 94
#define MX51_MXC_INT_SLIM_EXP 95
-#define MX51_MXC_INT_SSI3 96
+#define MX51_INT_SSI3 96
#define MX51_MXC_INT_EMI_BOOT 97
#define MX51_MXC_INT_CTI1_TG3 98
#define MX51_MXC_INT_SMC_RX 99
@@ -383,19 +345,6 @@
#define MX51_MXC_INT_EMI_NFC 101
#define MX51_MXC_INT_GPU_IDLE 102
-/* silicon revisions specific to i.MX51 */
-#define MX51_CHIP_REV_1_0 0x10
-#define MX51_CHIP_REV_1_1 0x11
-#define MX51_CHIP_REV_1_2 0x12
-#define MX51_CHIP_REV_1_3 0x13
-#define MX51_CHIP_REV_2_0 0x20
-#define MX51_CHIP_REV_2_1 0x21
-#define MX51_CHIP_REV_2_2 0x22
-#define MX51_CHIP_REV_2_3 0x23
-#define MX51_CHIP_REV_3_0 0x30
-#define MX51_CHIP_REV_3_1 0x31
-#define MX51_CHIP_REV_3_2 0x32
-
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx51_revision(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
new file mode 100644
index 0000000..9577cdb
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -0,0 +1,353 @@
+#ifndef __MACH_MX53_H__
+#define __MACH_MX53_H__
+
+/*
+ * IROM
+ */
+#define MX53_IROM_BASE_ADDR 0x0
+#define MX53_IROM_SIZE SZ_64K
+
+/* TZIC */
+#define MX53_TZIC_BASE_ADDR 0x0FFFC000
+
+/*
+ * AHCI SATA
+ */
+#define MX53_SATA_BASE_ADDR 0x10000000
+
+/*
+ * NFC
+ */
+#define MX53_NFC_AXI_BASE_ADDR 0xF7FF0000 /* NAND flash AXI */
+#define MX53_NFC_AXI_SIZE SZ_64K
+
+/*
+ * IRAM
+ */
+#define MX53_IRAM_BASE_ADDR 0xF8000000 /* internal ram */
+#define MX53_IRAM_PARTITIONS 16
+#define MX53_IRAM_SIZE (MX53_IRAM_PARTITIONS * SZ_8K) /* 128KB */
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX53_IPU_CTRL_BASE_ADDR 0x18000000
+#define MX53_GPU2D_BASE_ADDR 0x20000000
+#define MX53_GPU_BASE_ADDR 0x30000000
+#define MX53_GPU_GMEM_BASE_ADDR 0xF8020000
+
+#define MX53_DEBUG_BASE_ADDR 0x40000000
+#define MX53_DEBUG_SIZE SZ_1M
+#define MX53_ETB_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00001000)
+#define MX53_ETM_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00002000)
+#define MX53_TPIU_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00003000)
+#define MX53_CTI0_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00004000)
+#define MX53_CTI1_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00005000)
+#define MX53_CTI2_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00006000)
+#define MX53_CTI3_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00007000)
+#define MX53_CORTEX_DBG_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX53_SPBA0_BASE_ADDR 0x50000000
+#define MX53_SPBA0_SIZE SZ_1M
+
+#define MX53_MMC_SDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000)
+#define MX53_MMC_SDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000)
+#define MX53_UART3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX53_CSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000)
+#define MX53_SSI2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00014000)
+#define MX53_MMC_SDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000)
+#define MX53_MMC_SDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000)
+#define MX53_SPDIF_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00028000)
+#define MX53_ASRC_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0002C000)
+#define MX53_ATA_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00030000)
+#define MX53_SLIM_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00034000)
+#define MX53_HSI2C_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00038000)
+#define MX53_SPBA_CTRL_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 1
+ */
+#define MX53_AIPS1_BASE_ADDR 0x53F00000
+#define MX53_AIPS1_SIZE SZ_1M
+
+#define MX53_OTG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00080000)
+#define MX53_GPIO1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00084000)
+#define MX53_GPIO2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00088000)
+#define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000)
+#define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000)
+#define MX53_WDOG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000)
+#define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX53_IOMUXC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX53_EPIT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX53_EPIT2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX53_PWM1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX53_PWM2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX53_UART1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX53_UART2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX53_SRC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX53_CCM_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX53_GPC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D8000)
+#define MX53_GPIO5_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000DC000)
+#define MX53_GPIO6_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E0000)
+#define MX53_GPIO7_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E4000)
+#define MX53_ATA_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E8000)
+#define MX53_I2C3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000EC000)
+#define MX53_UART4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000F0000)
+
+/*
+ * AIPS 2
+ */
+#define MX53_AIPS2_BASE_ADDR 0x63F00000
+#define MX53_AIPS2_SIZE SZ_1M
+
+#define MX53_PLL1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00080000)
+#define MX53_PLL2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00084000)
+#define MX53_PLL3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00088000)
+#define MX53_PLL4_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0008C000)
+#define MX53_UART5_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00090000)
+#define MX53_AHBMAX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00094000)
+#define MX53_IIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00098000)
+#define MX53_CSU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX53_CSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX53_CSPI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX53_AUDMUX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX53_RTC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D4000)
+#define MX53_M4IF_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX53_ESDCTL_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX53_WEIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX53_NFC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX53_EMI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX53_MXC_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000)
+#define MX53_PTP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000FC000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX53_CSD0_BASE_ADDR 0x90000000
+#define MX53_CSD1_BASE_ADDR 0xA0000000
+#define MX53_CS0_BASE_ADDR 0xB0000000
+#define MX53_CS1_BASE_ADDR 0xB8000000
+#define MX53_CS2_BASE_ADDR 0xC0000000
+#define MX53_CS3_BASE_ADDR 0xC8000000
+#define MX53_CS4_BASE_ADDR 0xCC000000
+#define MX53_CS5_BASE_ADDR 0xCE000000
+
+#define MX53_IO_P2V(x) IMX_IO_P2V(x)
+#define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x))
+
+/*
+ * defines for SPBA modules
+ */
+#define MX53_SPBA_SDHC1 0x04
+#define MX53_SPBA_SDHC2 0x08
+#define MX53_SPBA_UART3 0x0C
+#define MX53_SPBA_CSPI1 0x10
+#define MX53_SPBA_SSI2 0x14
+#define MX53_SPBA_SDHC3 0x20
+#define MX53_SPBA_SDHC4 0x24
+#define MX53_SPBA_SPDIF 0x28
+#define MX53_SPBA_ATA 0x30
+#define MX53_SPBA_SLIM 0x34
+#define MX53_SPBA_HSI2C 0x38
+#define MX53_SPBA_CTRL 0x3C
+
+/*
+ * DMA request assignments
+ */
+#define MX53_DMA_REQ_SSI3_TX1 47
+#define MX53_DMA_REQ_SSI3_RX1 46
+#define MX53_DMA_REQ_SSI3_TX2 45
+#define MX53_DMA_REQ_SSI3_RX2 44
+#define MX53_DMA_REQ_UART3_TX 43
+#define MX53_DMA_REQ_UART3_RX 42
+#define MX53_DMA_REQ_ESAI_TX 41
+#define MX53_DMA_REQ_ESAI_RX 40
+#define MX53_DMA_REQ_CSPI_TX 39
+#define MX53_DMA_REQ_CSPI_RX 38
+#define MX53_DMA_REQ_ASRC_DMA6 37
+#define MX53_DMA_REQ_ASRC_DMA5 36
+#define MX53_DMA_REQ_ASRC_DMA4 35
+#define MX53_DMA_REQ_ASRC_DMA3 34
+#define MX53_DMA_REQ_ASRC_DMA2 33
+#define MX53_DMA_REQ_ASRC_DMA1 32
+#define MX53_DMA_REQ_EMI_WR 31
+#define MX53_DMA_REQ_EMI_RD 30
+#define MX53_DMA_REQ_SSI1_TX1 29
+#define MX53_DMA_REQ_SSI1_RX1 28
+#define MX53_DMA_REQ_SSI1_TX2 27
+#define MX53_DMA_REQ_SSI1_RX2 26
+#define MX53_DMA_REQ_SSI2_TX1 25
+#define MX53_DMA_REQ_SSI2_RX1 24
+#define MX53_DMA_REQ_SSI2_TX2 23
+#define MX53_DMA_REQ_SSI2_RX2 22
+#define MX53_DMA_REQ_I2C2_SDHC2 21
+#define MX53_DMA_REQ_I2C1_SDHC1 20
+#define MX53_DMA_REQ_UART1_TX 19
+#define MX53_DMA_REQ_UART1_RX 18
+#define MX53_DMA_REQ_UART5_TX 17
+#define MX53_DMA_REQ_UART5_RX 16
+#define MX53_DMA_REQ_SPDIF_TX 15
+#define MX53_DMA_REQ_SPDIF_RX 14
+#define MX53_DMA_REQ_UART2_FIRI_TX 13
+#define MX53_DMA_REQ_UART2_FIRI_RX 12
+#define MX53_DMA_REQ_SDHC4 11
+#define MX53_DMA_REQ_I2C3_SDHC3 10
+#define MX53_DMA_REQ_CSPI2_TX 9
+#define MX53_DMA_REQ_CSPI2_RX 8
+#define MX53_DMA_REQ_CSPI1_TX 7
+#define MX53_DMA_REQ_CSPI1_RX 6
+#define MX53_DMA_REQ_IPU 5
+#define MX53_DMA_REQ_ATA_TX_END 4
+#define MX53_DMA_REQ_ATA_UART4_TX 3
+#define MX53_DMA_REQ_ATA_UART4_RX 2
+#define MX53_DMA_REQ_GPC 1
+#define MX53_DMA_REQ_VPU 0
+
+/*
+ * Interrupt numbers
+ */
+#define MX53_INT_RESV0 0
+#define MX53_INT_MMC_SDHC1 1
+#define MX53_INT_MMC_SDHC2 2
+#define MX53_INT_MMC_SDHC3 3
+#define MX53_INT_MMC_SDHC4 4
+#define MX53_INT_RESV5 5
+#define MX53_INT_SDMA 6
+#define MX53_INT_IOMUX 7
+#define MX53_INT_NFC 8
+#define MX53_INT_VPU 9
+#define MX53_INT_IPU_ERR 10
+#define MX53_INT_IPU_SYN 11
+#define MX53_INT_GPU 12
+#define MX53_INT_RESV13 13
+#define MX53_INT_USB_H1 14
+#define MX53_INT_EMI 15
+#define MX53_INT_USB_H2 16
+#define MX53_INT_USB_H3 17
+#define MX53_INT_USB_OTG 18
+#define MX53_INT_SAHARA_H0 19
+#define MX53_INT_SAHARA_H1 20
+#define MX53_INT_SCC_SMN 21
+#define MX53_INT_SCC_STZ 22
+#define MX53_INT_SCC_SCM 23
+#define MX53_INT_SRTC_NTZ 24
+#define MX53_INT_SRTC_TZ 25
+#define MX53_INT_RTIC 26
+#define MX53_INT_CSU 27
+#define MX53_INT_SATA 28
+#define MX53_INT_SSI1 29
+#define MX53_INT_SSI2 30
+#define MX53_INT_UART1 31
+#define MX53_INT_UART2 32
+#define MX53_INT_UART3 33
+#define MX53_INT_RESV34 34
+#define MX53_INT_RESV35 35
+#define MX53_INT_CSPI1 36
+#define MX53_INT_CSPI2 37
+#define MX53_INT_CSPI 38
+#define MX53_INT_GPT 39
+#define MX53_INT_EPIT1 40
+#define MX53_INT_EPIT2 41
+#define MX53_INT_GPIO1_INT7 42
+#define MX53_INT_GPIO1_INT6 43
+#define MX53_INT_GPIO1_INT5 44
+#define MX53_INT_GPIO1_INT4 45
+#define MX53_INT_GPIO1_INT3 46
+#define MX53_INT_GPIO1_INT2 47
+#define MX53_INT_GPIO1_INT1 48
+#define MX53_INT_GPIO1_INT0 49
+#define MX53_INT_GPIO1_LOW 50
+#define MX53_INT_GPIO1_HIGH 51
+#define MX53_INT_GPIO2_LOW 52
+#define MX53_INT_GPIO2_HIGH 53
+#define MX53_INT_GPIO3_LOW 54
+#define MX53_INT_GPIO3_HIGH 55
+#define MX53_INT_GPIO4_LOW 56
+#define MX53_INT_GPIO4_HIGH 57
+#define MX53_INT_WDOG1 58
+#define MX53_INT_WDOG2 59
+#define MX53_INT_KPP 60
+#define MX53_INT_PWM1 61
+#define MX53_INT_I2C1 62
+#define MX53_INT_I2C2 63
+#define MX53_INT_I2C3 64
+#define MX53_INT_RESV65 65
+#define MX53_INT_RESV66 66
+#define MX53_INT_SPDIF 67
+#define MX53_INT_SIM_DAT 68
+#define MX53_INT_IIM 69
+#define MX53_INT_ATA 70
+#define MX53_INT_CCM1 71
+#define MX53_INT_CCM2 72
+#define MX53_INT_GPC1 73
+#define MX53_INT_GPC2 74
+#define MX53_INT_SRC 75
+#define MX53_INT_NM 76
+#define MX53_INT_PMU 77
+#define MX53_INT_CTI_IRQ 78
+#define MX53_INT_CTI1_TG0 79
+#define MX53_INT_CTI1_TG1 80
+#define MX53_INT_ESAI 81
+#define MX53_INT_CAN1 82
+#define MX53_INT_CAN2 83
+#define MX53_INT_GPU2_IRQ 84
+#define MX53_INT_GPU2_BUSY 85
+#define MX53_INT_RESV86 86
+#define MX53_INT_FEC 87
+#define MX53_INT_OWIRE 88
+#define MX53_INT_CTI1_TG2 89
+#define MX53_INT_SJC 90
+#define MX53_INT_TVE 92
+#define MX53_INT_FIRI 93
+#define MX53_INT_PWM2 94
+#define MX53_INT_SLIM_EXP 95
+#define MX53_INT_SSI3 96
+#define MX53_INT_EMI_BOOT 97
+#define MX53_INT_CTI1_TG3 98
+#define MX53_INT_SMC_RX 99
+#define MX53_INT_VPU_IDLE 100
+#define MX53_INT_EMI_NFC 101
+#define MX53_INT_GPU_IDLE 102
+#define MX53_INT_GPIO5_LOW 103
+#define MX53_INT_GPIO5_HIGH 104
+#define MX53_INT_GPIO6_LOW 105
+#define MX53_INT_GPIO6_HIGH 106
+#define MX53_INT_GPIO7_LOW 107
+#define MX53_INT_GPIO7_HIGH 108
+
+/* silicon revisions specific to i.MX53 */
+#define MX53_CHIP_REV_1_0 0x10
+#define MX53_CHIP_REV_1_1 0x11
+#define MX53_CHIP_REV_1_2 0x12
+#define MX53_CHIP_REV_1_3 0x13
+#define MX53_CHIP_REV_2_0 0x20
+#define MX53_CHIP_REV_2_1 0x21
+#define MX53_CHIP_REV_2_2 0x22
+#define MX53_CHIP_REV_2_3 0x23
+#define MX53_CHIP_REV_3_0 0x30
+#define MX53_CHIP_REV_3_1 0x31
+#define MX53_CHIP_REV_3_2 0x32
+
+#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index a42c720..04c7a26 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -32,9 +32,25 @@
#define MXC_CPU_MX27 27
#define MXC_CPU_MX31 31
#define MXC_CPU_MX35 35
+#define MXC_CPU_MX50 50
#define MXC_CPU_MX51 51
+#define MXC_CPU_MX53 53
#define MXC_CPU_MXC91231 91231
+#define IMX_CHIP_REVISION_1_0 0x10
+#define IMX_CHIP_REVISION_1_1 0x11
+#define IMX_CHIP_REVISION_1_2 0x12
+#define IMX_CHIP_REVISION_1_3 0x13
+#define IMX_CHIP_REVISION_2_0 0x20
+#define IMX_CHIP_REVISION_2_1 0x21
+#define IMX_CHIP_REVISION_2_2 0x22
+#define IMX_CHIP_REVISION_2_3 0x23
+#define IMX_CHIP_REVISION_3_0 0x30
+#define IMX_CHIP_REVISION_3_1 0x31
+#define IMX_CHIP_REVISION_3_2 0x32
+#define IMX_CHIP_REVISION_3_3 0x33
+#define IMX_CHIP_REVISION_UNKNOWN 0xff
+
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
#endif
@@ -111,7 +127,19 @@
# define cpu_is_mx35() (0)
#endif
-#ifdef CONFIG_ARCH_MX5
+#ifdef CONFIG_ARCH_MX50
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX50
+# endif
+# define cpu_is_mx50() (mxc_cpu_type == MXC_CPU_MX50)
+#else
+# define cpu_is_mx50() (0)
+#endif
+
+#ifdef CONFIG_ARCH_MX51
# ifdef mxc_cpu_type
# undef mxc_cpu_type
# define mxc_cpu_type __mxc_cpu_type
@@ -123,6 +151,18 @@
# define cpu_is_mx51() (0)
#endif
+#ifdef CONFIG_ARCH_MX53
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX53
+# endif
+# define cpu_is_mx53() (mxc_cpu_type == MXC_CPU_MX53)
+#else
+# define cpu_is_mx53() (0)
+#endif
+
#ifdef CONFIG_ARCH_MXC91231
# ifdef mxc_cpu_type
# undef mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 0ca3101..765190f 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -21,14 +21,12 @@
* L2CC
*/
#define MXC91231_L2CC_BASE_ADDR 0x30000000
-#define MXC91231_L2CC_BASE_ADDR_VIRT 0xF9000000
#define MXC91231_L2CC_SIZE SZ_64K
/*
* AIPS 1
*/
#define MXC91231_AIPS1_BASE_ADDR 0x43F00000
-#define MXC91231_AIPS1_BASE_ADDR_VIRT 0xFC000000
#define MXC91231_AIPS1_SIZE SZ_1M
#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR
@@ -53,7 +51,6 @@
* AIPS 2
*/
#define MXC91231_AIPS2_BASE_ADDR 0x53F00000
-#define MXC91231_AIPS2_BASE_ADDR_VIRT 0xFC100000
#define MXC91231_AIPS2_SIZE SZ_1M
#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000)
@@ -79,7 +76,6 @@
* SPBA global module 0
*/
#define MXC91231_SPBA0_BASE_ADDR 0x50000000
-#define MXC91231_SPBA0_BASE_ADDR_VIRT 0xFC200000
#define MXC91231_SPBA0_SIZE SZ_1M
#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000)
@@ -109,7 +105,6 @@
* SPBA global module 1
*/
#define MXC91231_SPBA1_BASE_ADDR 0x52000000
-#define MXC91231_SPBA1_BASE_ADDR_VIRT 0xFC300000
#define MXC91231_SPBA1_SIZE SZ_1M
#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000)
@@ -144,18 +139,15 @@
* ROMP and AVIC
*/
#define MXC91231_ROMP_BASE_ADDR 0x60000000
-#define MXC91231_ROMP_BASE_ADDR_VIRT 0xFC400000
#define MXC91231_ROMP_SIZE SZ_64K
#define MXC91231_AVIC_BASE_ADDR 0x68000000
-#define MXC91231_AVIC_BASE_ADDR_VIRT 0xFC410000
#define MXC91231_AVIC_SIZE SZ_64K
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000
-#define MXC91231_X_MEMC_BASE_ADDR_VIRT 0xFC420000
#define MXC91231_X_MEMC_SIZE SZ_64K
#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000)
@@ -183,19 +175,10 @@
/*
* This macro defines the physical to virtual address mapping for all the
* peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0.
+ * and returning the virtual address.
*/
-
-#define MXC91231_IO_ADDRESS(x) ( \
- IMX_IO_ADDRESS(x, MXC91231_L2CC) ?: \
- IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?: \
- IMX_IO_ADDRESS(x, MXC91231_ROMP) ?: \
- IMX_IO_ADDRESS(x, MXC91231_AVIC) ?: \
- IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?: \
- IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?: \
- IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?: \
- IMX_IO_ADDRESS(x, MXC91231_AIPS2))
+#define MXC91231_IO_P2V(x) IMX_IO_P2V(x)
+#define MXC91231_IO_ADDRESS(x) IOMEM(MXC91231_IO_P2V(x))
/*
* Interrupt numbers
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 7fc5f99..a523a40 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -31,6 +31,7 @@
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
+#define MXC_USBH2CTRL_OFFSET 0x14
#define MX5_USBOTHER_REGS_OFFSET 0x800
diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h
index 9be1122..913e043 100644
--- a/arch/arm/plat-mxc/include/mach/sdma.h
+++ b/arch/arm/plat-mxc/include/mach/sdma.h
@@ -2,16 +2,62 @@
#define __MACH_MXC_SDMA_H__
/**
+ * struct sdma_script_start_addrs - SDMA script start pointers
+ *
+ * start addresses of the different functions in the physical
+ * address space of the SDMA engine.
+ */
+struct sdma_script_start_addrs {
+ s32 ap_2_ap_addr;
+ s32 ap_2_bp_addr;
+ s32 ap_2_ap_fixed_addr;
+ s32 bp_2_ap_addr;
+ s32 loopback_on_dsp_side_addr;
+ s32 mcu_interrupt_only_addr;
+ s32 firi_2_per_addr;
+ s32 firi_2_mcu_addr;
+ s32 per_2_firi_addr;
+ s32 mcu_2_firi_addr;
+ s32 uart_2_per_addr;
+ s32 uart_2_mcu_addr;
+ s32 per_2_app_addr;
+ s32 mcu_2_app_addr;
+ s32 per_2_per_addr;
+ s32 uartsh_2_per_addr;
+ s32 uartsh_2_mcu_addr;
+ s32 per_2_shp_addr;
+ s32 mcu_2_shp_addr;
+ s32 ata_2_mcu_addr;
+ s32 mcu_2_ata_addr;
+ s32 app_2_per_addr;
+ s32 app_2_mcu_addr;
+ s32 shp_2_per_addr;
+ s32 shp_2_mcu_addr;
+ s32 mshc_2_mcu_addr;
+ s32 mcu_2_mshc_addr;
+ s32 spdif_2_mcu_addr;
+ s32 mcu_2_spdif_addr;
+ s32 asrc_2_mcu_addr;
+ s32 ext_mem_2_ipu_addr;
+ s32 descrambler_addr;
+ s32 dptc_dvfs_addr;
+ s32 utra_addr;
+ s32 ram_code_start_addr;
+};
+
+/**
* struct sdma_platform_data - platform specific data for SDMA engine
*
* @sdma_version The version of this SDMA engine
* @cpu_name used to generate the firmware name
* @to_version CPU Tape out version
+ * @script_addrs SDMA scripts addresses in SDMA ROM
*/
struct sdma_platform_data {
int sdma_version;
char *cpu_name;
int to_version;
+ struct sdma_script_start_addrs *script_addrs;
};
#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 9dd9c20..3a70ebf 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -63,6 +63,8 @@
#define MX3X_UART1_BASE_ADDR 0x43F90000
#define MX3X_UART2_BASE_ADDR 0x43F94000
#define MX51_UART1_BASE_ADDR 0x73fbc000
+#define MX50_UART1_BASE_ADDR 0x53fbc000
+#define MX53_UART1_BASE_ADDR 0x53fbc000
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
@@ -102,6 +104,12 @@
case MACH_TYPE_EUKREA_CPUIMX51SD:
uart_base = MX51_UART1_BASE_ADDR;
break;
+ case MACH_TYPE_MX50_RDP:
+ uart_base = MX50_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX53_EVK:
+ uart_base = MX53_UART1_BASE_ADDR;
+ break;
default:
break;
}
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index b318c6a..99a9cdb 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -32,31 +32,38 @@
static void __iomem *base;
/*
- * setups a single pad in the iomuxer
+ * configures a single pad in the iomuxer
*/
-int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
{
- if (pad->mux_ctrl_ofs)
- __raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
+ u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
+ u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+ u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
+ u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
+ u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
+ u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
- if (pad->select_input_ofs)
- __raw_writel(pad->select_input,
- base + pad->select_input_ofs);
+ if (mux_ctrl_ofs)
+ __raw_writel(mux_mode, base + mux_ctrl_ofs);
- if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
- __raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
+ if (sel_input_ofs)
+ __raw_writel(sel_input, base + sel_input_ofs);
+
+ if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
+ __raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+
return 0;
}
EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
-int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
{
- struct pad_desc *p = pad_list;
+ iomux_v3_cfg_t *p = pad_list;
int i;
int ret;
for (i = 0; i < count; i++) {
- ret = mxc_iomux_v3_setup_pad(p);
+ ret = mxc_iomux_v3_setup_pad(*p);
if (ret)
return ret;
p++;
diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c
new file mode 100644
index 0000000..0c799ac
--- /dev/null
+++ b/arch/arm/plat-mxc/irq-common.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) BitBox Ltd 2010
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#include "irq-common.h"
+
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
+{
+ struct mxc_irq_chip *chip;
+ struct irq_chip *base;
+ int ret;
+
+ ret = -ENOSYS;
+
+ base = get_irq_chip(irq);
+ if (base) {
+ chip = container_of(base, struct mxc_irq_chip, base);
+ if (chip->set_priority)
+ ret = chip->set_priority(irq, prio);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(imx_irq_set_priority);
+
+int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+ struct mxc_irq_chip *chip;
+ struct irq_chip *base;
+ int ret;
+
+ ret = -ENOSYS;
+
+ base = get_irq_chip(irq);
+ if (base) {
+ chip = container_of(base, struct mxc_irq_chip, base);
+ if (chip->set_irq_fiq)
+ ret = chip->set_irq_fiq(irq, type);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(mxc_set_irq_fiq);
diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/plat-mxc/irq-common.h
new file mode 100644
index 0000000..7203543
--- /dev/null
+++ b/arch/arm/plat-mxc/irq-common.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) BitBox Ltd 2010
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_IRQ_COMMON_H__
+#define __PLAT_MXC_IRQ_COMMON_H__
+
+struct mxc_irq_chip
+{
+ struct irq_chip base;
+ int (*set_priority)(unsigned char irq, unsigned char prio);
+ int (*set_irq_fiq)(unsigned int irq, unsigned int type);
+};
+
+#endif
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 925bce4..3455fc0 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -26,6 +26,7 @@
#include <mach/common.h>
#include <asm/proc-fns.h>
#include <asm/system.h>
+#include <asm/mach-types.h>
static void __iomem *wdog_base;
@@ -42,12 +43,19 @@
return;
}
#endif
+#ifdef CONFIG_MACH_MX51_EFIKAMX
+ if (machine_is_mx51_efikamx()) {
+ mx51_efikamx_reset();
+ return;
+ }
+#endif
+
if (cpu_is_mx1()) {
wcr_enable = (1 << 0);
} else {
struct clk *clk;
- clk = clk_get_sys("imx-wdt.0", NULL);
+ clk = clk_get_sys("imx2-wdt.0", NULL);
if (!IS_ERR(clk))
clk_enable(clk);
wcr_enable = (1 << 2);
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 3703ab2..e69ed8a 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -21,6 +21,8 @@
#include <mach/hardware.h>
#include <mach/common.h>
+#include "irq-common.h"
+
/*
*****************************************
* TZIC Registers *
@@ -47,6 +49,25 @@
void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+#ifdef CONFIG_FIQ
+static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+ unsigned int index, mask, value;
+
+ index = irq >> 5;
+ if (unlikely(index >= 4))
+ return -EINVAL;
+ mask = 1U << (irq & 0x1F);
+
+ value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
+ if (type)
+ value &= ~mask;
+ __raw_writel(value, tzic_base + TZIC_INTSEC0(index));
+
+ return 0;
+}
+#endif
+
/**
* tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
*
@@ -104,12 +125,17 @@
return 0;
}
-static struct irq_chip mxc_tzic_chip = {
- .name = "MXC_TZIC",
- .ack = tzic_mask_irq,
- .mask = tzic_mask_irq,
- .unmask = tzic_unmask_irq,
- .set_wake = tzic_set_wake_irq,
+static struct mxc_irq_chip mxc_tzic_chip = {
+ .base = {
+ .name = "MXC_TZIC",
+ .ack = tzic_mask_irq,
+ .mask = tzic_mask_irq,
+ .unmask = tzic_unmask_irq,
+ .set_wake = tzic_set_wake_irq,
+ },
+#ifdef CONFIG_FIQ
+ .set_irq_fiq = tzic_set_irq_fiq,
+#endif
};
/*
@@ -141,10 +167,16 @@
/* all IRQ no FIQ Warning :: No selection */
for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
- set_irq_chip(i, &mxc_tzic_chip);
+ set_irq_chip(i, &mxc_tzic_chip.base);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
+
+#ifdef CONFIG_FIQ
+ /* Initialize FIQ */
+ init_FIQ();
+#endif
+
pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
}
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 85e6fd21..eda4e3a 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -119,7 +119,7 @@
}
static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
- pin_cfg_t cfg)
+ pin_cfg_t cfg, bool sleep)
{
static const char *afnames[] = {
[NMK_GPIO_ALT_GPIO] = "GPIO",
@@ -145,11 +145,34 @@
int output = PIN_DIR(cfg);
int val = PIN_VAL(cfg);
- dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n",
- pin, afnames[af], pullnames[pull], slpmnames[slpm],
+ dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n",
+ pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm],
output ? "output " : "input",
output ? (val ? "high" : "low") : "");
+ if (sleep) {
+ int slpm_pull = PIN_SLPM_PULL(cfg);
+ int slpm_output = PIN_SLPM_DIR(cfg);
+ int slpm_val = PIN_SLPM_VAL(cfg);
+
+ /*
+ * The SLPM_* values are normal values + 1 to allow zero to
+ * mean "same as normal".
+ */
+ if (slpm_pull)
+ pull = slpm_pull - 1;
+ if (slpm_output)
+ output = slpm_output - 1;
+ if (slpm_val)
+ val = slpm_val - 1;
+
+ dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
+ pin,
+ slpm_pull ? pullnames[pull] : "same",
+ slpm_output ? (output ? "output" : "input") : "same",
+ slpm_val ? (val ? "high" : "low") : "same");
+ }
+
if (output)
__nmk_gpio_make_output(nmk_chip, offset, val);
else {
@@ -175,7 +198,7 @@
* side-effects. The gpio can be manipulated later using standard GPIO API
* calls.
*/
-int nmk_config_pin(pin_cfg_t cfg)
+int nmk_config_pin(pin_cfg_t cfg, bool sleep)
{
struct nmk_gpio_chip *nmk_chip;
int gpio = PIN_NUM(cfg);
@@ -186,7 +209,7 @@
return -EINVAL;
spin_lock_irqsave(&nmk_chip->lock, flags);
- __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg);
+ __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg, sleep);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
return 0;
@@ -207,7 +230,7 @@
int i;
for (i = 0; i < num; i++) {
- int ret = nmk_config_pin(cfgs[i]);
+ ret = nmk_config_pin(cfgs[i], false);
if (ret)
break;
}
@@ -216,6 +239,21 @@
}
EXPORT_SYMBOL(nmk_config_pins);
+int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num)
+{
+ int ret = 0;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ ret = nmk_config_pin(cfgs[i], true);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(nmk_config_pins_sleep);
+
/**
* nmk_gpio_set_slpm() - configure the sleep mode of a pin
* @gpio: pin number
@@ -634,7 +672,7 @@
chip = &nmk_chip->chip;
chip->base = pdata->first_gpio;
- chip->label = pdata->name;
+ chip->label = pdata->name ?: dev_name(&dev->dev);
chip->dev = &dev->dev;
chip->owner = THIS_MODULE;
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 8c5ae3f..05a3936 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -19,16 +19,22 @@
* bit 9..10 - Alternate Function Selection
* bit 11..12 - Pull up/down state
* bit 13 - Sleep mode behaviour
- * bit 14 - (sleep mode) Direction
- * bit 15 - (sleep mode) Value (if output)
+ * bit 14 - Direction
+ * bit 15 - Value (if output)
+ * bit 16..18 - SLPM pull up/down state
+ * bit 19..20 - SLPM direction
+ * bit 21..22 - SLPM Value (if output)
*
* to facilitate the definition, the following macros are provided
*
* PIN_CFG_DEFAULT - default config (0):
* pull up/down = disabled
* sleep mode = input/wakeup
- * (sleep mode) direction = input
- * (sleep mode) value = low
+ * direction = input
+ * value = low
+ * SLPM direction = same as normal
+ * SLPM pull = same as normal
+ * SLPM value = same as normal
*
* PIN_CFG - default config with alternate function
* PIN_CFG_PULL - default config with alternate function and pull up/down
@@ -75,30 +81,64 @@
#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
-/* Shortcuts. Use these instead of separate DIR and VAL. */
-#define PIN_INPUT PIN_DIR_INPUT
+#define PIN_SLPM_PULL_SHIFT 16
+#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x) \
+ (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE \
+ ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP \
+ ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN \
+ ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT 19
+#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x) \
+ (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT 21
+#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x) \
+ (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */
+#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE)
#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
-/*
- * These are the same as the ones above, but should make more sense to the
- * reader when seen along with a setting a pin to AF mode.
- */
-#define PIN_SLPM_INPUT PIN_INPUT
-#define PIN_SLPM_OUTPUT_LOW PIN_OUTPUT_LOW
-#define PIN_SLPM_OUTPUT_HIGH PIN_OUTPUT_HIGH
+#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
-#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT)
+#define PIN_CFG_DEFAULT (0)
#define PIN_CFG(num, alt) \
(PIN_CFG_DEFAULT |\
(PIN_NUM(num) | PIN_##alt))
+#define PIN_CFG_INPUT(num, alt, pull) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
#define PIN_CFG_PULL(num, alt, pull) \
((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
(PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
-extern int nmk_config_pin(pin_cfg_t cfg);
+extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
#endif
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 4aacdd1..3aca5ba 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
+obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 9e604c8..75f6564 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -423,7 +423,7 @@
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
/*
* each MFP pin will have a MFPR register, since the offset of the
* register varies between processors, the processor specific code
@@ -470,6 +470,6 @@
void mfp_config(unsigned long *mfp_cfgs, int num);
void mfp_config_run(void);
void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
#endif /* __ASM_PLAT_MFP_H */
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d0602dd..d5a5d4d 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -273,50 +273,6 @@
#define MXC_SDMA_MIN_PRIORITY 1
#define MXC_SDMA_MAX_PRIORITY 7
-/**
- * struct sdma_script_start_addrs - SDMA script start pointers
- *
- * start addresses of the different functions in the physical
- * address space of the SDMA engine.
- */
-struct sdma_script_start_addrs {
- u32 ap_2_ap_addr;
- u32 ap_2_bp_addr;
- u32 ap_2_ap_fixed_addr;
- u32 bp_2_ap_addr;
- u32 loopback_on_dsp_side_addr;
- u32 mcu_interrupt_only_addr;
- u32 firi_2_per_addr;
- u32 firi_2_mcu_addr;
- u32 per_2_firi_addr;
- u32 mcu_2_firi_addr;
- u32 uart_2_per_addr;
- u32 uart_2_mcu_addr;
- u32 per_2_app_addr;
- u32 mcu_2_app_addr;
- u32 per_2_per_addr;
- u32 uartsh_2_per_addr;
- u32 uartsh_2_mcu_addr;
- u32 per_2_shp_addr;
- u32 mcu_2_shp_addr;
- u32 ata_2_mcu_addr;
- u32 mcu_2_ata_addr;
- u32 app_2_per_addr;
- u32 app_2_mcu_addr;
- u32 shp_2_per_addr;
- u32 shp_2_mcu_addr;
- u32 mshc_2_mcu_addr;
- u32 mcu_2_mshc_addr;
- u32 spdif_2_mcu_addr;
- u32 mcu_2_spdif_addr;
- u32 asrc_2_mcu_addr;
- u32 ext_mem_2_ipu_addr;
- u32 descrambler_addr;
- u32 dptc_dvfs_addr;
- u32 utra_addr;
- u32 ram_code_start_addr;
-};
-
#define SDMA_FIRMWARE_MAGIC 0x414d4453
/**
@@ -1127,8 +1083,74 @@
*/
}
-static int __init sdma_init(struct sdma_engine *sdma,
- void *ram_code, int ram_code_size)
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34
+
+static void sdma_add_scripts(struct sdma_engine *sdma,
+ const struct sdma_script_start_addrs *addr)
+{
+ s32 *addr_arr = (u32 *)addr;
+ s32 *saddr_arr = (u32 *)sdma->script_addrs;
+ int i;
+
+ for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++)
+ if (addr_arr[i] > 0)
+ saddr_arr[i] = addr_arr[i];
+}
+
+static int __init sdma_get_firmware(struct sdma_engine *sdma,
+ const char *cpu_name, int to_version)
+{
+ const struct firmware *fw;
+ char *fwname;
+ const struct sdma_firmware_header *header;
+ int ret;
+ const struct sdma_script_start_addrs *addr;
+ unsigned short *ram_code;
+
+ fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin", cpu_name, to_version);
+ if (!fwname)
+ return -ENOMEM;
+
+ ret = request_firmware(&fw, fwname, sdma->dev);
+ if (ret) {
+ kfree(fwname);
+ return ret;
+ }
+ kfree(fwname);
+
+ if (fw->size < sizeof(*header))
+ goto err_firmware;
+
+ header = (struct sdma_firmware_header *)fw->data;
+
+ if (header->magic != SDMA_FIRMWARE_MAGIC)
+ goto err_firmware;
+ if (header->ram_code_start + header->ram_code_size > fw->size)
+ goto err_firmware;
+
+ addr = (void *)header + header->script_addrs_start;
+ ram_code = (void *)header + header->ram_code_start;
+
+ clk_enable(sdma->clk);
+ /* download the RAM image for SDMA */
+ sdma_load_script(sdma, ram_code,
+ header->ram_code_size,
+ sdma->script_addrs->ram_code_start_addr);
+ clk_disable(sdma->clk);
+
+ sdma_add_scripts(sdma, addr);
+
+ dev_info(sdma->dev, "loaded firmware %d.%d\n",
+ header->version_major,
+ header->version_minor);
+
+err_firmware:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static int __init sdma_init(struct sdma_engine *sdma)
{
int i, ret;
dma_addr_t ccb_phys;
@@ -1192,11 +1214,6 @@
__raw_writel(ccb_phys, sdma->regs + SDMA_H_C0PTR);
- /* download the RAM image for SDMA */
- sdma_load_script(sdma, ram_code,
- ram_code_size,
- sdma->script_addrs->ram_code_start_addr);
-
/* Set bits of CONFIG register with given context switching mode */
__raw_writel(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG);
@@ -1216,14 +1233,9 @@
static int __init sdma_probe(struct platform_device *pdev)
{
int ret;
- const struct firmware *fw;
- const struct sdma_firmware_header *header;
- const struct sdma_script_start_addrs *addr;
int irq;
- unsigned short *ram_code;
struct resource *iores;
struct sdma_platform_data *pdata = pdev->dev.platform_data;
- char *fwname;
int i;
dma_cap_mask_t mask;
struct sdma_engine *sdma;
@@ -1262,38 +1274,9 @@
if (ret)
goto err_request_irq;
- fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin",
- pdata->cpu_name, pdata->to_version);
- if (!fwname) {
- ret = -ENOMEM;
- goto err_cputype;
- }
-
- ret = request_firmware(&fw, fwname, &pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "request firmware \"%s\" failed with %d\n",
- fwname, ret);
- kfree(fwname);
- goto err_cputype;
- }
- kfree(fwname);
-
- if (fw->size < sizeof(*header))
- goto err_firmware;
-
- header = (struct sdma_firmware_header *)fw->data;
-
- if (header->magic != SDMA_FIRMWARE_MAGIC)
- goto err_firmware;
- if (header->ram_code_start + header->ram_code_size > fw->size)
- goto err_firmware;
-
- addr = (void *)header + header->script_addrs_start;
- ram_code = (void *)header + header->ram_code_start;
- sdma->script_addrs = kmalloc(sizeof(*addr), GFP_KERNEL);
+ sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL);
if (!sdma->script_addrs)
- goto err_firmware;
- memcpy(sdma->script_addrs, addr, sizeof(*addr));
+ goto err_alloc;
sdma->version = pdata->sdma_version;
@@ -1316,10 +1299,15 @@
list_add_tail(&sdmac->chan.device_node, &sdma->dma_device.channels);
}
- ret = sdma_init(sdma, ram_code, header->ram_code_size);
+ ret = sdma_init(sdma);
if (ret)
goto err_init;
+ if (pdata->script_addrs)
+ sdma_add_scripts(sdma, pdata->script_addrs);
+
+ sdma_get_firmware(sdma, pdata->cpu_name, pdata->to_version);
+
sdma->dma_device.dev = &pdev->dev;
sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources;
@@ -1336,10 +1324,6 @@
goto err_init;
}
- dev_info(&pdev->dev, "initialized (firmware %d.%d)\n",
- header->version_major,
- header->version_minor);
-
/* request channel 0. This is an internal control channel
* to the SDMA engine and not available to clients.
*/
@@ -1347,15 +1331,13 @@
dma_cap_set(DMA_SLAVE, mask);
dma_request_channel(mask, NULL, NULL);
- release_firmware(fw);
+ dev_info(sdma->dev, "initialized\n");
return 0;
err_init:
kfree(sdma->script_addrs);
-err_firmware:
- release_firmware(fw);
-err_cputype:
+err_alloc:
free_irq(irq, sdma);
err_request_irq:
iounmap(sdma->regs);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3143ac7..082495b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -230,11 +230,11 @@
This enables support for the GPIOs found on the STMPE I/O
Expanders.
-config GPIO_TC35892
- bool "TC35892 GPIOs"
- depends on MFD_TC35892
+config GPIO_TC3589X
+ bool "TC3589X GPIOs"
+ depends on MFD_TC3589X
help
- This enables support for the GPIOs found on the TC35892
+ This enables support for the GPIOs found on the TC3589X
I/O Expander.
config GPIO_TWL4030
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index bdf3dde..39bfd7a 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -24,7 +24,7 @@
obj-$(CONFIG_GPIO_PCH) += pch_gpio.o
obj-$(CONFIG_GPIO_PL061) += pl061.o
obj-$(CONFIG_GPIO_STMPE) += stmpe-gpio.o
-obj-$(CONFIG_GPIO_TC35892) += tc35892-gpio.o
+obj-$(CONFIG_GPIO_TC3589X) += tc3589x-gpio.o
obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_UCB1400) += ucb1400_gpio.o
diff --git a/drivers/gpio/tc35892-gpio.c b/drivers/gpio/tc35892-gpio.c
deleted file mode 100644
index 7e10c93..0000000
--- a/drivers/gpio/tc35892-gpio.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/tc35892.h>
-
-/*
- * These registers are modified under the irq bus lock and cached to avoid
- * unnecessary writes in bus_sync_unlock.
- */
-enum { REG_IBE, REG_IEV, REG_IS, REG_IE };
-
-#define CACHE_NR_REGS 4
-#define CACHE_NR_BANKS 3
-
-struct tc35892_gpio {
- struct gpio_chip chip;
- struct tc35892 *tc35892;
- struct device *dev;
- struct mutex irq_lock;
-
- int irq_base;
-
- /* Caches of interrupt control registers for bus_lock */
- u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
- u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
-};
-
-static inline struct tc35892_gpio *to_tc35892_gpio(struct gpio_chip *chip)
-{
- return container_of(chip, struct tc35892_gpio, chip);
-}
-
-static int tc35892_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
- struct tc35892 *tc35892 = tc35892_gpio->tc35892;
- u8 reg = TC35892_GPIODATA0 + (offset / 8) * 2;
- u8 mask = 1 << (offset % 8);
- int ret;
-
- ret = tc35892_reg_read(tc35892, reg);
- if (ret < 0)
- return ret;
-
- return ret & mask;
-}
-
-static void tc35892_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
- struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
- struct tc35892 *tc35892 = tc35892_gpio->tc35892;
- u8 reg = TC35892_GPIODATA0 + (offset / 8) * 2;
- unsigned pos = offset % 8;
- u8 data[] = {!!val << pos, 1 << pos};
-
- tc35892_block_write(tc35892, reg, ARRAY_SIZE(data), data);
-}
-
-static int tc35892_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int val)
-{
- struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
- struct tc35892 *tc35892 = tc35892_gpio->tc35892;
- u8 reg = TC35892_GPIODIR0 + offset / 8;
- unsigned pos = offset % 8;
-
- tc35892_gpio_set(chip, offset, val);
-
- return tc35892_set_bits(tc35892, reg, 1 << pos, 1 << pos);
-}
-
-static int tc35892_gpio_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
- struct tc35892 *tc35892 = tc35892_gpio->tc35892;
- u8 reg = TC35892_GPIODIR0 + offset / 8;
- unsigned pos = offset % 8;
-
- return tc35892_set_bits(tc35892, reg, 1 << pos, 0);
-}
-
-static int tc35892_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
-
- return tc35892_gpio->irq_base + offset;
-}
-
-static struct gpio_chip template_chip = {
- .label = "tc35892",
- .owner = THIS_MODULE,
- .direction_input = tc35892_gpio_direction_input,
- .get = tc35892_gpio_get,
- .direction_output = tc35892_gpio_direction_output,
- .set = tc35892_gpio_set,
- .to_irq = tc35892_gpio_to_irq,
- .can_sleep = 1,
-};
-
-static int tc35892_gpio_irq_set_type(unsigned int irq, unsigned int type)
-{
- struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
- int offset = irq - tc35892_gpio->irq_base;
- int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
-
- if (type == IRQ_TYPE_EDGE_BOTH) {
- tc35892_gpio->regs[REG_IBE][regoffset] |= mask;
- return 0;
- }
-
- tc35892_gpio->regs[REG_IBE][regoffset] &= ~mask;
-
- if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
- tc35892_gpio->regs[REG_IS][regoffset] |= mask;
- else
- tc35892_gpio->regs[REG_IS][regoffset] &= ~mask;
-
- if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH)
- tc35892_gpio->regs[REG_IEV][regoffset] |= mask;
- else
- tc35892_gpio->regs[REG_IEV][regoffset] &= ~mask;
-
- return 0;
-}
-
-static void tc35892_gpio_irq_lock(unsigned int irq)
-{
- struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
-
- mutex_lock(&tc35892_gpio->irq_lock);
-}
-
-static void tc35892_gpio_irq_sync_unlock(unsigned int irq)
-{
- struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
- struct tc35892 *tc35892 = tc35892_gpio->tc35892;
- static const u8 regmap[] = {
- [REG_IBE] = TC35892_GPIOIBE0,
- [REG_IEV] = TC35892_GPIOIEV0,
- [REG_IS] = TC35892_GPIOIS0,
- [REG_IE] = TC35892_GPIOIE0,
- };
- int i, j;
-
- for (i = 0; i < CACHE_NR_REGS; i++) {
- for (j = 0; j < CACHE_NR_BANKS; j++) {
- u8 old = tc35892_gpio->oldregs[i][j];
- u8 new = tc35892_gpio->regs[i][j];
-
- if (new == old)
- continue;
-
- tc35892_gpio->oldregs[i][j] = new;
- tc35892_reg_write(tc35892, regmap[i] + j * 8, new);
- }
- }
-
- mutex_unlock(&tc35892_gpio->irq_lock);
-}
-
-static void tc35892_gpio_irq_mask(unsigned int irq)
-{
- struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
- int offset = irq - tc35892_gpio->irq_base;
- int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
-
- tc35892_gpio->regs[REG_IE][regoffset] &= ~mask;
-}
-
-static void tc35892_gpio_irq_unmask(unsigned int irq)
-{
- struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
- int offset = irq - tc35892_gpio->irq_base;
- int regoffset = offset / 8;
- int mask = 1 << (offset % 8);
-
- tc35892_gpio->regs[REG_IE][regoffset] |= mask;
-}
-
-static struct irq_chip tc35892_gpio_irq_chip = {
- .name = "tc35892-gpio",
- .bus_lock = tc35892_gpio_irq_lock,
- .bus_sync_unlock = tc35892_gpio_irq_sync_unlock,
- .mask = tc35892_gpio_irq_mask,
- .unmask = tc35892_gpio_irq_unmask,
- .set_type = tc35892_gpio_irq_set_type,
-};
-
-static irqreturn_t tc35892_gpio_irq(int irq, void *dev)
-{
- struct tc35892_gpio *tc35892_gpio = dev;
- struct tc35892 *tc35892 = tc35892_gpio->tc35892;
- u8 status[CACHE_NR_BANKS];
- int ret;
- int i;
-
- ret = tc35892_block_read(tc35892, TC35892_GPIOMIS0,
- ARRAY_SIZE(status), status);
- if (ret < 0)
- return IRQ_NONE;
-
- for (i = 0; i < ARRAY_SIZE(status); i++) {
- unsigned int stat = status[i];
- if (!stat)
- continue;
-
- while (stat) {
- int bit = __ffs(stat);
- int line = i * 8 + bit;
-
- handle_nested_irq(tc35892_gpio->irq_base + line);
- stat &= ~(1 << bit);
- }
-
- tc35892_reg_write(tc35892, TC35892_GPIOIC0 + i, status[i]);
- }
-
- return IRQ_HANDLED;
-}
-
-static int tc35892_gpio_irq_init(struct tc35892_gpio *tc35892_gpio)
-{
- int base = tc35892_gpio->irq_base;
- int irq;
-
- for (irq = base; irq < base + tc35892_gpio->chip.ngpio; irq++) {
- set_irq_chip_data(irq, tc35892_gpio);
- set_irq_chip_and_handler(irq, &tc35892_gpio_irq_chip,
- handle_simple_irq);
- set_irq_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- set_irq_noprobe(irq);
-#endif
- }
-
- return 0;
-}
-
-static void tc35892_gpio_irq_remove(struct tc35892_gpio *tc35892_gpio)
-{
- int base = tc35892_gpio->irq_base;
- int irq;
-
- for (irq = base; irq < base + tc35892_gpio->chip.ngpio; irq++) {
-#ifdef CONFIG_ARM
- set_irq_flags(irq, 0);
-#endif
- set_irq_chip_and_handler(irq, NULL, NULL);
- set_irq_chip_data(irq, NULL);
- }
-}
-
-static int __devinit tc35892_gpio_probe(struct platform_device *pdev)
-{
- struct tc35892 *tc35892 = dev_get_drvdata(pdev->dev.parent);
- struct tc35892_gpio_platform_data *pdata;
- struct tc35892_gpio *tc35892_gpio;
- int ret;
- int irq;
-
- pdata = tc35892->pdata->gpio;
- if (!pdata)
- return -ENODEV;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- tc35892_gpio = kzalloc(sizeof(struct tc35892_gpio), GFP_KERNEL);
- if (!tc35892_gpio)
- return -ENOMEM;
-
- mutex_init(&tc35892_gpio->irq_lock);
-
- tc35892_gpio->dev = &pdev->dev;
- tc35892_gpio->tc35892 = tc35892;
-
- tc35892_gpio->chip = template_chip;
- tc35892_gpio->chip.ngpio = tc35892->num_gpio;
- tc35892_gpio->chip.dev = &pdev->dev;
- tc35892_gpio->chip.base = pdata->gpio_base;
-
- tc35892_gpio->irq_base = tc35892->irq_base + TC35892_INT_GPIO(0);
-
- /* Bring the GPIO module out of reset */
- ret = tc35892_set_bits(tc35892, TC35892_RSTCTRL,
- TC35892_RSTCTRL_GPIRST, 0);
- if (ret < 0)
- goto out_free;
-
- ret = tc35892_gpio_irq_init(tc35892_gpio);
- if (ret)
- goto out_free;
-
- ret = request_threaded_irq(irq, NULL, tc35892_gpio_irq, IRQF_ONESHOT,
- "tc35892-gpio", tc35892_gpio);
- if (ret) {
- dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
- goto out_removeirq;
- }
-
- ret = gpiochip_add(&tc35892_gpio->chip);
- if (ret) {
- dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
- goto out_freeirq;
- }
-
- if (pdata->setup)
- pdata->setup(tc35892, tc35892_gpio->chip.base);
-
- platform_set_drvdata(pdev, tc35892_gpio);
-
- return 0;
-
-out_freeirq:
- free_irq(irq, tc35892_gpio);
-out_removeirq:
- tc35892_gpio_irq_remove(tc35892_gpio);
-out_free:
- kfree(tc35892_gpio);
- return ret;
-}
-
-static int __devexit tc35892_gpio_remove(struct platform_device *pdev)
-{
- struct tc35892_gpio *tc35892_gpio = platform_get_drvdata(pdev);
- struct tc35892 *tc35892 = tc35892_gpio->tc35892;
- struct tc35892_gpio_platform_data *pdata = tc35892->pdata->gpio;
- int irq = platform_get_irq(pdev, 0);
- int ret;
-
- if (pdata->remove)
- pdata->remove(tc35892, tc35892_gpio->chip.base);
-
- ret = gpiochip_remove(&tc35892_gpio->chip);
- if (ret < 0) {
- dev_err(tc35892_gpio->dev,
- "unable to remove gpiochip: %d\n", ret);
- return ret;
- }
-
- free_irq(irq, tc35892_gpio);
- tc35892_gpio_irq_remove(tc35892_gpio);
-
- platform_set_drvdata(pdev, NULL);
- kfree(tc35892_gpio);
-
- return 0;
-}
-
-static struct platform_driver tc35892_gpio_driver = {
- .driver.name = "tc35892-gpio",
- .driver.owner = THIS_MODULE,
- .probe = tc35892_gpio_probe,
- .remove = __devexit_p(tc35892_gpio_remove),
-};
-
-static int __init tc35892_gpio_init(void)
-{
- return platform_driver_register(&tc35892_gpio_driver);
-}
-subsys_initcall(tc35892_gpio_init);
-
-static void __exit tc35892_gpio_exit(void)
-{
- platform_driver_unregister(&tc35892_gpio_driver);
-}
-module_exit(tc35892_gpio_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("TC35892 GPIO driver");
-MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/gpio/tc3589x-gpio.c b/drivers/gpio/tc3589x-gpio.c
new file mode 100644
index 0000000..180d584
--- /dev/null
+++ b/drivers/gpio/tc3589x-gpio.c
@@ -0,0 +1,389 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/tc3589x.h>
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum { REG_IBE, REG_IEV, REG_IS, REG_IE };
+
+#define CACHE_NR_REGS 4
+#define CACHE_NR_BANKS 3
+
+struct tc3589x_gpio {
+ struct gpio_chip chip;
+ struct tc3589x *tc3589x;
+ struct device *dev;
+ struct mutex irq_lock;
+
+ int irq_base;
+
+ /* Caches of interrupt control registers for bus_lock */
+ u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
+ u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
+};
+
+static inline struct tc3589x_gpio *to_tc3589x_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct tc3589x_gpio, chip);
+}
+
+static int tc3589x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+ struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+ u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2;
+ u8 mask = 1 << (offset % 8);
+ int ret;
+
+ ret = tc3589x_reg_read(tc3589x, reg);
+ if (ret < 0)
+ return ret;
+
+ return ret & mask;
+}
+
+static void tc3589x_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+ struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+ u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2;
+ unsigned pos = offset % 8;
+ u8 data[] = {!!val << pos, 1 << pos};
+
+ tc3589x_block_write(tc3589x, reg, ARRAY_SIZE(data), data);
+}
+
+static int tc3589x_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+ struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+ u8 reg = TC3589x_GPIODIR0 + offset / 8;
+ unsigned pos = offset % 8;
+
+ tc3589x_gpio_set(chip, offset, val);
+
+ return tc3589x_set_bits(tc3589x, reg, 1 << pos, 1 << pos);
+}
+
+static int tc3589x_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+ struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+ u8 reg = TC3589x_GPIODIR0 + offset / 8;
+ unsigned pos = offset % 8;
+
+ return tc3589x_set_bits(tc3589x, reg, 1 << pos, 0);
+}
+
+static int tc3589x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+
+ return tc3589x_gpio->irq_base + offset;
+}
+
+static struct gpio_chip template_chip = {
+ .label = "tc3589x",
+ .owner = THIS_MODULE,
+ .direction_input = tc3589x_gpio_direction_input,
+ .get = tc3589x_gpio_get,
+ .direction_output = tc3589x_gpio_direction_output,
+ .set = tc3589x_gpio_set,
+ .to_irq = tc3589x_gpio_to_irq,
+ .can_sleep = 1,
+};
+
+static int tc3589x_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+ struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+ int offset = irq - tc3589x_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ if (type == IRQ_TYPE_EDGE_BOTH) {
+ tc3589x_gpio->regs[REG_IBE][regoffset] |= mask;
+ return 0;
+ }
+
+ tc3589x_gpio->regs[REG_IBE][regoffset] &= ~mask;
+
+ if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+ tc3589x_gpio->regs[REG_IS][regoffset] |= mask;
+ else
+ tc3589x_gpio->regs[REG_IS][regoffset] &= ~mask;
+
+ if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH)
+ tc3589x_gpio->regs[REG_IEV][regoffset] |= mask;
+ else
+ tc3589x_gpio->regs[REG_IEV][regoffset] &= ~mask;
+
+ return 0;
+}
+
+static void tc3589x_gpio_irq_lock(unsigned int irq)
+{
+ struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+
+ mutex_lock(&tc3589x_gpio->irq_lock);
+}
+
+static void tc3589x_gpio_irq_sync_unlock(unsigned int irq)
+{
+ struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+ struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+ static const u8 regmap[] = {
+ [REG_IBE] = TC3589x_GPIOIBE0,
+ [REG_IEV] = TC3589x_GPIOIEV0,
+ [REG_IS] = TC3589x_GPIOIS0,
+ [REG_IE] = TC3589x_GPIOIE0,
+ };
+ int i, j;
+
+ for (i = 0; i < CACHE_NR_REGS; i++) {
+ for (j = 0; j < CACHE_NR_BANKS; j++) {
+ u8 old = tc3589x_gpio->oldregs[i][j];
+ u8 new = tc3589x_gpio->regs[i][j];
+
+ if (new == old)
+ continue;
+
+ tc3589x_gpio->oldregs[i][j] = new;
+ tc3589x_reg_write(tc3589x, regmap[i] + j * 8, new);
+ }
+ }
+
+ mutex_unlock(&tc3589x_gpio->irq_lock);
+}
+
+static void tc3589x_gpio_irq_mask(unsigned int irq)
+{
+ struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+ int offset = irq - tc3589x_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ tc3589x_gpio->regs[REG_IE][regoffset] &= ~mask;
+}
+
+static void tc3589x_gpio_irq_unmask(unsigned int irq)
+{
+ struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+ int offset = irq - tc3589x_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ tc3589x_gpio->regs[REG_IE][regoffset] |= mask;
+}
+
+static struct irq_chip tc3589x_gpio_irq_chip = {
+ .name = "tc3589x-gpio",
+ .bus_lock = tc3589x_gpio_irq_lock,
+ .bus_sync_unlock = tc3589x_gpio_irq_sync_unlock,
+ .mask = tc3589x_gpio_irq_mask,
+ .unmask = tc3589x_gpio_irq_unmask,
+ .set_type = tc3589x_gpio_irq_set_type,
+};
+
+static irqreturn_t tc3589x_gpio_irq(int irq, void *dev)
+{
+ struct tc3589x_gpio *tc3589x_gpio = dev;
+ struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+ u8 status[CACHE_NR_BANKS];
+ int ret;
+ int i;
+
+ ret = tc3589x_block_read(tc3589x, TC3589x_GPIOMIS0,
+ ARRAY_SIZE(status), status);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ for (i = 0; i < ARRAY_SIZE(status); i++) {
+ unsigned int stat = status[i];
+ if (!stat)
+ continue;
+
+ while (stat) {
+ int bit = __ffs(stat);
+ int line = i * 8 + bit;
+
+ handle_nested_irq(tc3589x_gpio->irq_base + line);
+ stat &= ~(1 << bit);
+ }
+
+ tc3589x_reg_write(tc3589x, TC3589x_GPIOIC0 + i, status[i]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int tc3589x_gpio_irq_init(struct tc3589x_gpio *tc3589x_gpio)
+{
+ int base = tc3589x_gpio->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + tc3589x_gpio->chip.ngpio; irq++) {
+ set_irq_chip_data(irq, tc3589x_gpio);
+ set_irq_chip_and_handler(irq, &tc3589x_gpio_irq_chip,
+ handle_simple_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ return 0;
+}
+
+static void tc3589x_gpio_irq_remove(struct tc3589x_gpio *tc3589x_gpio)
+{
+ int base = tc3589x_gpio->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + tc3589x_gpio->chip.ngpio; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static int __devinit tc3589x_gpio_probe(struct platform_device *pdev)
+{
+ struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+ struct tc3589x_gpio_platform_data *pdata;
+ struct tc3589x_gpio *tc3589x_gpio;
+ int ret;
+ int irq;
+
+ pdata = tc3589x->pdata->gpio;
+ if (!pdata)
+ return -ENODEV;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ tc3589x_gpio = kzalloc(sizeof(struct tc3589x_gpio), GFP_KERNEL);
+ if (!tc3589x_gpio)
+ return -ENOMEM;
+
+ mutex_init(&tc3589x_gpio->irq_lock);
+
+ tc3589x_gpio->dev = &pdev->dev;
+ tc3589x_gpio->tc3589x = tc3589x;
+
+ tc3589x_gpio->chip = template_chip;
+ tc3589x_gpio->chip.ngpio = tc3589x->num_gpio;
+ tc3589x_gpio->chip.dev = &pdev->dev;
+ tc3589x_gpio->chip.base = pdata->gpio_base;
+
+ tc3589x_gpio->irq_base = tc3589x->irq_base + TC3589x_INT_GPIO(0);
+
+ /* Bring the GPIO module out of reset */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL,
+ TC3589x_RSTCTRL_GPIRST, 0);
+ if (ret < 0)
+ goto out_free;
+
+ ret = tc3589x_gpio_irq_init(tc3589x_gpio);
+ if (ret)
+ goto out_free;
+
+ ret = request_threaded_irq(irq, NULL, tc3589x_gpio_irq, IRQF_ONESHOT,
+ "tc3589x-gpio", tc3589x_gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+ goto out_removeirq;
+ }
+
+ ret = gpiochip_add(&tc3589x_gpio->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+ goto out_freeirq;
+ }
+
+ if (pdata->setup)
+ pdata->setup(tc3589x, tc3589x_gpio->chip.base);
+
+ platform_set_drvdata(pdev, tc3589x_gpio);
+
+ return 0;
+
+out_freeirq:
+ free_irq(irq, tc3589x_gpio);
+out_removeirq:
+ tc3589x_gpio_irq_remove(tc3589x_gpio);
+out_free:
+ kfree(tc3589x_gpio);
+ return ret;
+}
+
+static int __devexit tc3589x_gpio_remove(struct platform_device *pdev)
+{
+ struct tc3589x_gpio *tc3589x_gpio = platform_get_drvdata(pdev);
+ struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+ struct tc3589x_gpio_platform_data *pdata = tc3589x->pdata->gpio;
+ int irq = platform_get_irq(pdev, 0);
+ int ret;
+
+ if (pdata->remove)
+ pdata->remove(tc3589x, tc3589x_gpio->chip.base);
+
+ ret = gpiochip_remove(&tc3589x_gpio->chip);
+ if (ret < 0) {
+ dev_err(tc3589x_gpio->dev,
+ "unable to remove gpiochip: %d\n", ret);
+ return ret;
+ }
+
+ free_irq(irq, tc3589x_gpio);
+ tc3589x_gpio_irq_remove(tc3589x_gpio);
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(tc3589x_gpio);
+
+ return 0;
+}
+
+static struct platform_driver tc3589x_gpio_driver = {
+ .driver.name = "tc3589x-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = tc3589x_gpio_probe,
+ .remove = __devexit_p(tc3589x_gpio_remove),
+};
+
+static int __init tc3589x_gpio_init(void)
+{
+ return platform_driver_register(&tc3589x_gpio_driver);
+}
+subsys_initcall(tc3589x_gpio_init);
+
+static void __exit tc3589x_gpio_exit(void)
+{
+ platform_driver_unregister(&tc3589x_gpio_driver);
+}
+module_exit(tc3589x_gpio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TC3589x GPIO driver");
+MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 3a87f3ba..c76bd31 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -459,6 +459,16 @@
To compile this driver as a module, choose M here: the
module will be called omap4-keypad.
+config KEYBOARD_TC3589X
+ tristate "TC3589X Keypad support"
+ depends on MFD_TC3589X
+ help
+ Say Y here if you want to use the keypad controller on
+ TC35892/3 I/O expander.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tc3589x-keypad.
+
config KEYBOARD_TNETV107X
tristate "TI TNETV107X keypad support"
depends on ARCH_DAVINCI_TNETV107X
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 622de73..2aa6ce2 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -41,6 +41,7 @@
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
+obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
new file mode 100644
index 0000000..69dc0cb
--- /dev/null
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -0,0 +1,472 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License, version 2
+ *
+ * TC35893 MFD Keypad Controller driver
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mfd/tc3589x.h>
+
+/* Maximum supported keypad matrix row/columns size */
+#define TC3589x_MAX_KPROW 8
+#define TC3589x_MAX_KPCOL 12
+
+/* keypad related Constants */
+#define TC3589x_MAX_DEBOUNCE_SETTLE 0xFF
+#define DEDICATED_KEY_VAL 0xFF
+
+/* Pull up/down masks */
+#define TC3589x_NO_PULL_MASK 0x0
+#define TC3589x_PULL_DOWN_MASK 0x1
+#define TC3589x_PULL_UP_MASK 0x2
+#define TC3589x_PULLUP_ALL_MASK 0xAA
+#define TC3589x_IO_PULL_VAL(index, mask) ((mask)<<((index)%4)*2))
+
+/* Bit masks for IOCFG register */
+#define IOCFG_BALLCFG 0x01
+#define IOCFG_IG 0x08
+
+#define KP_EVCODE_COL_MASK 0x0F
+#define KP_EVCODE_ROW_MASK 0x70
+#define KP_RELEASE_EVT_MASK 0x80
+
+#define KP_ROW_SHIFT 4
+
+#define KP_NO_VALID_KEY_MASK 0x7F
+
+/* bit masks for RESTCTRL register */
+#define TC3589x_KBDRST 0x2
+#define TC3589x_IRQRST 0x10
+#define TC3589x_RESET_ALL 0x1B
+
+/* KBDMFS register bit mask */
+#define TC3589x_KBDMFS_EN 0x1
+
+/* CLKEN register bitmask */
+#define KPD_CLK_EN 0x1
+
+/* RSTINTCLR register bit mask */
+#define IRQ_CLEAR 0x1
+
+/* bit masks for keyboard interrupts*/
+#define TC3589x_EVT_LOSS_INT 0x8
+#define TC3589x_EVT_INT 0x4
+#define TC3589x_KBD_LOSS_INT 0x2
+#define TC3589x_KBD_INT 0x1
+
+/* bit masks for keyboard interrupt clear*/
+#define TC3589x_EVT_INT_CLR 0x2
+#define TC3589x_KBD_INT_CLR 0x1
+
+#define TC3589x_KBD_KEYMAP_SIZE 64
+
+/**
+ * struct tc_keypad - data structure used by keypad driver
+ * @input: pointer to input device object
+ * @board: keypad platform device
+ * @krow: number of rows
+ * @kcol: number of coloumns
+ * @keymap: matrix scan code table for keycodes
+ */
+struct tc_keypad {
+ struct tc3589x *tc3589x;
+ struct input_dev *input;
+ const struct tc3589x_keypad_platform_data *board;
+ unsigned int krow;
+ unsigned int kcol;
+ unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+ bool keypad_stopped;
+};
+
+static int __devinit tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
+{
+ int ret;
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ u8 settle_time = keypad->board->settle_time;
+ u8 dbounce_period = keypad->board->debounce_period;
+ u8 rows = keypad->board->krow & 0xf; /* mask out the nibble */
+ u8 column = keypad->board->kcol & 0xf; /* mask out the nibble */
+
+ /* validate platform configurations */
+ if (keypad->board->kcol > TC3589x_MAX_KPCOL ||
+ keypad->board->krow > TC3589x_MAX_KPROW ||
+ keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE ||
+ keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE)
+ return -EINVAL;
+
+ /* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
+ ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE,
+ (rows << KP_ROW_SHIFT) | column);
+ if (ret < 0)
+ return ret;
+
+ /* configure dedicated key config, no dedicated key selected */
+ ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_LSB, DEDICATED_KEY_VAL);
+ if (ret < 0)
+ return ret;
+
+ ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_MSB, DEDICATED_KEY_VAL);
+ if (ret < 0)
+ return ret;
+
+ /* Configure settle time */
+ ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time);
+ if (ret < 0)
+ return ret;
+
+ /* Configure debounce time */
+ ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period);
+ if (ret < 0)
+ return ret;
+
+ /* Start of initialise keypad GPIOs */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_IOCFG, 0x0, IOCFG_IG);
+ if (ret < 0)
+ return ret;
+
+ /* Configure pull-up resistors for all row GPIOs */
+ ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_LSB,
+ TC3589x_PULLUP_ALL_MASK);
+ if (ret < 0)
+ return ret;
+
+ ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_MSB,
+ TC3589x_PULLUP_ALL_MASK);
+ if (ret < 0)
+ return ret;
+
+ /* Configure pull-up resistors for all column GPIOs */
+ ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_LSB,
+ TC3589x_PULLUP_ALL_MASK);
+ if (ret < 0)
+ return ret;
+
+ ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_MSB,
+ TC3589x_PULLUP_ALL_MASK);
+ if (ret < 0)
+ return ret;
+
+ ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG2_LSB,
+ TC3589x_PULLUP_ALL_MASK);
+
+ return ret;
+}
+
+#define TC35893_DATA_REGS 4
+#define TC35893_KEYCODE_FIFO_EMPTY 0x7f
+#define TC35893_KEYCODE_FIFO_CLEAR 0xff
+#define TC35893_KEYPAD_ROW_SHIFT 0x3
+
+static irqreturn_t tc3589x_keypad_irq(int irq, void *dev)
+{
+ struct tc_keypad *keypad = dev;
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ u8 i, row_index, col_index, kbd_code, up;
+ u8 code;
+
+ for (i = 0; i < TC35893_DATA_REGS * 2; i++) {
+ kbd_code = tc3589x_reg_read(tc3589x, TC3589x_EVTCODE_FIFO);
+
+ /* loop till fifo is empty and no more keys are pressed */
+ if (kbd_code == TC35893_KEYCODE_FIFO_EMPTY ||
+ kbd_code == TC35893_KEYCODE_FIFO_CLEAR)
+ continue;
+
+ /* valid key is found */
+ col_index = kbd_code & KP_EVCODE_COL_MASK;
+ row_index = (kbd_code & KP_EVCODE_ROW_MASK) >> KP_ROW_SHIFT;
+ code = MATRIX_SCAN_CODE(row_index, col_index,
+ TC35893_KEYPAD_ROW_SHIFT);
+ up = kbd_code & KP_RELEASE_EVT_MASK;
+
+ input_event(keypad->input, EV_MSC, MSC_SCAN, code);
+ input_report_key(keypad->input, keypad->keymap[code], !up);
+ input_sync(keypad->input);
+ }
+
+ /* clear IRQ */
+ tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+ 0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+ /* enable IRQ */
+ tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+ 0x0, TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+
+ return IRQ_HANDLED;
+}
+
+static int tc3589x_keypad_enable(struct tc_keypad *keypad)
+{
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ int ret;
+
+ /* pull the keypad module out of reset */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x0);
+ if (ret < 0)
+ return ret;
+
+ /* configure KBDMFS */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMFS, 0x0, TC3589x_KBDMFS_EN);
+ if (ret < 0)
+ return ret;
+
+ /* enable the keypad clock */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x0, KPD_CLK_EN);
+ if (ret < 0)
+ return ret;
+
+ /* clear pending IRQs */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_RSTINTCLR, 0x0, 0x1);
+ if (ret < 0)
+ return ret;
+
+ /* enable the IRQs */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, 0x0,
+ TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+ if (ret < 0)
+ return ret;
+
+ keypad->keypad_stopped = false;
+
+ return ret;
+}
+
+static int tc3589x_keypad_disable(struct tc_keypad *keypad)
+{
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ int ret;
+
+ /* clear IRQ */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+ 0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+ if (ret < 0)
+ return ret;
+
+ /* disable all interrupts */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+ ~(TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT), 0x0);
+ if (ret < 0)
+ return ret;
+
+ /* disable the keypad module */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x1, 0x0);
+ if (ret < 0)
+ return ret;
+
+ /* put the keypad module into reset */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x1);
+
+ keypad->keypad_stopped = true;
+
+ return ret;
+}
+
+static int tc3589x_keypad_open(struct input_dev *input)
+{
+ int error;
+ struct tc_keypad *keypad = input_get_drvdata(input);
+
+ /* enable the keypad module */
+ error = tc3589x_keypad_enable(keypad);
+ if (error < 0) {
+ dev_err(&input->dev, "failed to enable keypad module\n");
+ return error;
+ }
+
+ error = tc3589x_keypad_init_key_hardware(keypad);
+ if (error < 0) {
+ dev_err(&input->dev, "failed to configure keypad module\n");
+ return error;
+ }
+
+ return 0;
+}
+
+static void tc3589x_keypad_close(struct input_dev *input)
+{
+ struct tc_keypad *keypad = input_get_drvdata(input);
+
+ /* disable the keypad module */
+ tc3589x_keypad_disable(keypad);
+}
+
+static int __devinit tc3589x_keypad_probe(struct platform_device *pdev)
+{
+ struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+ struct tc_keypad *keypad;
+ struct input_dev *input;
+ const struct tc3589x_keypad_platform_data *plat;
+ int error, irq;
+
+ plat = tc3589x->pdata->keypad;
+ if (!plat) {
+ dev_err(&pdev->dev, "invalid keypad platform data\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ keypad = kzalloc(sizeof(struct tc_keypad), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!keypad || !input) {
+ dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ keypad->board = plat;
+ keypad->input = input;
+ keypad->tc3589x = tc3589x;
+
+ input->id.bustype = BUS_I2C;
+ input->name = pdev->name;
+ input->dev.parent = &pdev->dev;
+
+ input->keycode = keypad->keymap;
+ input->keycodesize = sizeof(keypad->keymap[0]);
+ input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+ input->open = tc3589x_keypad_open;
+ input->close = tc3589x_keypad_close;
+
+ input_set_drvdata(input, keypad);
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+
+ __set_bit(EV_KEY, input->evbit);
+ if (!plat->no_autorepeat)
+ __set_bit(EV_REP, input->evbit);
+
+ matrix_keypad_build_keymap(plat->keymap_data, 0x3,
+ input->keycode, input->keybit);
+
+ error = request_threaded_irq(irq, NULL,
+ tc3589x_keypad_irq, plat->irqtype,
+ "tc3589x-keypad", keypad);
+ if (error < 0) {
+ dev_err(&pdev->dev,
+ "Could not allocate irq %d,error %d\n",
+ irq, error);
+ goto err_free_mem;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev, "Could not register input device\n");
+ goto err_free_irq;
+ }
+
+ /* let platform decide if keypad is a wakeup source or not */
+ device_init_wakeup(&pdev->dev, plat->enable_wakeup);
+ device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup);
+
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+
+err_free_irq:
+ free_irq(irq, keypad);
+err_free_mem:
+ input_free_device(input);
+ kfree(keypad);
+ return error;
+}
+
+static int __devexit tc3589x_keypad_remove(struct platform_device *pdev)
+{
+ struct tc_keypad *keypad = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ if (!keypad->keypad_stopped)
+ tc3589x_keypad_disable(keypad);
+
+ free_irq(irq, keypad);
+
+ input_unregister_device(keypad->input);
+
+ kfree(keypad);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tc3589x_keypad_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct tc_keypad *keypad = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ /* keypad is already off; we do nothing */
+ if (keypad->keypad_stopped)
+ return 0;
+
+ /* if device is not a wakeup source, disable it for powersave */
+ if (!device_may_wakeup(&pdev->dev))
+ tc3589x_keypad_disable(keypad);
+ else
+ enable_irq_wake(irq);
+
+ return 0;
+}
+
+static int tc3589x_keypad_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct tc_keypad *keypad = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ if (!keypad->keypad_stopped)
+ return 0;
+
+ /* enable the device to resume normal operations */
+ if (!device_may_wakeup(&pdev->dev))
+ tc3589x_keypad_enable(keypad);
+ else
+ disable_irq_wake(irq);
+
+ return 0;
+}
+
+static const SIMPLE_DEV_PM_OPS(tc3589x_keypad_dev_pm_ops,
+ tc3589x_keypad_suspend, tc3589x_keypad_resume);
+#endif
+
+static struct platform_driver tc3589x_keypad_driver = {
+ .driver.name = "tc3589x-keypad",
+ .driver.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .driver.pm = &tc3589x_keypad_dev_pm_ops,
+#endif
+ .probe = tc3589x_keypad_probe,
+ .remove = __devexit_p(tc3589x_keypad_remove),
+};
+
+static int __init tc3589x_keypad_init(void)
+{
+ return platform_driver_register(&tc3589x_keypad_driver);
+}
+module_init(tc3589x_keypad_init);
+
+static void __exit tc3589x_keypad_exit(void)
+{
+ return platform_driver_unregister(&tc3589x_keypad_driver);
+}
+module_exit(tc3589x_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer");
+MODULE_DESCRIPTION("TC35893 Keypad Driver");
+MODULE_ALIAS("platform:tc3589x-keypad")
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3a1493b..e8e704f 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -218,12 +218,12 @@
Keypad: stmpe-keypad
Touchscreen: stmpe-ts
-config MFD_TC35892
- bool "Support Toshiba TC35892"
+config MFD_TC3589X
+ bool "Support Toshiba TC35892 and variants"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
- Support for the Toshiba TC35892 I/O Expander.
+ Support for the Toshiba TC35892 and variants I/O Expander.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f54b365..e590d1e 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -16,7 +16,7 @@
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
-obj-$(CONFIG_MFD_TC35892) += tc35892.o
+obj-$(CONFIG_MFD_TC3589X) += tc3589x.o
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
diff --git a/drivers/mfd/tc35892.c b/drivers/mfd/tc35892.c
deleted file mode 100644
index e619e2a..0000000
--- a/drivers/mfd/tc35892.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/tc35892.h>
-
-/**
- * tc35892_reg_read() - read a single TC35892 register
- * @tc35892: Device to read from
- * @reg: Register to read
- */
-int tc35892_reg_read(struct tc35892 *tc35892, u8 reg)
-{
- int ret;
-
- ret = i2c_smbus_read_byte_data(tc35892->i2c, reg);
- if (ret < 0)
- dev_err(tc35892->dev, "failed to read reg %#x: %d\n",
- reg, ret);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_reg_read);
-
-/**
- * tc35892_reg_read() - write a single TC35892 register
- * @tc35892: Device to write to
- * @reg: Register to read
- * @data: Value to write
- */
-int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data)
-{
- int ret;
-
- ret = i2c_smbus_write_byte_data(tc35892->i2c, reg, data);
- if (ret < 0)
- dev_err(tc35892->dev, "failed to write reg %#x: %d\n",
- reg, ret);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_reg_write);
-
-/**
- * tc35892_block_read() - read multiple TC35892 registers
- * @tc35892: Device to read from
- * @reg: First register
- * @length: Number of registers
- * @values: Buffer to write to
- */
-int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length, u8 *values)
-{
- int ret;
-
- ret = i2c_smbus_read_i2c_block_data(tc35892->i2c, reg, length, values);
- if (ret < 0)
- dev_err(tc35892->dev, "failed to read regs %#x: %d\n",
- reg, ret);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_block_read);
-
-/**
- * tc35892_block_write() - write multiple TC35892 registers
- * @tc35892: Device to write to
- * @reg: First register
- * @length: Number of registers
- * @values: Values to write
- */
-int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length,
- const u8 *values)
-{
- int ret;
-
- ret = i2c_smbus_write_i2c_block_data(tc35892->i2c, reg, length,
- values);
- if (ret < 0)
- dev_err(tc35892->dev, "failed to write regs %#x: %d\n",
- reg, ret);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_block_write);
-
-/**
- * tc35892_set_bits() - set the value of a bitfield in a TC35892 register
- * @tc35892: Device to write to
- * @reg: Register to write
- * @mask: Mask of bits to set
- * @values: Value to set
- */
-int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val)
-{
- int ret;
-
- mutex_lock(&tc35892->lock);
-
- ret = tc35892_reg_read(tc35892, reg);
- if (ret < 0)
- goto out;
-
- ret &= ~mask;
- ret |= val;
-
- ret = tc35892_reg_write(tc35892, reg, ret);
-
-out:
- mutex_unlock(&tc35892->lock);
- return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_set_bits);
-
-static struct resource gpio_resources[] = {
- {
- .start = TC35892_INT_GPIIRQ,
- .end = TC35892_INT_GPIIRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mfd_cell tc35892_devs[] = {
- {
- .name = "tc35892-gpio",
- .num_resources = ARRAY_SIZE(gpio_resources),
- .resources = &gpio_resources[0],
- },
-};
-
-static irqreturn_t tc35892_irq(int irq, void *data)
-{
- struct tc35892 *tc35892 = data;
- int status;
-
- status = tc35892_reg_read(tc35892, TC35892_IRQST);
- if (status < 0)
- return IRQ_NONE;
-
- while (status) {
- int bit = __ffs(status);
-
- handle_nested_irq(tc35892->irq_base + bit);
- status &= ~(1 << bit);
- }
-
- /*
- * A dummy read or write (to any register) appears to be necessary to
- * have the last interrupt clear (for example, GPIO IC write) take
- * effect.
- */
- tc35892_reg_read(tc35892, TC35892_IRQST);
-
- return IRQ_HANDLED;
-}
-
-static void tc35892_irq_dummy(unsigned int irq)
-{
- /* No mask/unmask at this level */
-}
-
-static struct irq_chip tc35892_irq_chip = {
- .name = "tc35892",
- .mask = tc35892_irq_dummy,
- .unmask = tc35892_irq_dummy,
-};
-
-static int tc35892_irq_init(struct tc35892 *tc35892)
-{
- int base = tc35892->irq_base;
- int irq;
-
- for (irq = base; irq < base + TC35892_NR_INTERNAL_IRQS; irq++) {
- set_irq_chip_data(irq, tc35892);
- set_irq_chip_and_handler(irq, &tc35892_irq_chip,
- handle_edge_irq);
- set_irq_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- set_irq_noprobe(irq);
-#endif
- }
-
- return 0;
-}
-
-static void tc35892_irq_remove(struct tc35892 *tc35892)
-{
- int base = tc35892->irq_base;
- int irq;
-
- for (irq = base; irq < base + TC35892_NR_INTERNAL_IRQS; irq++) {
-#ifdef CONFIG_ARM
- set_irq_flags(irq, 0);
-#endif
- set_irq_chip_and_handler(irq, NULL, NULL);
- set_irq_chip_data(irq, NULL);
- }
-}
-
-static int tc35892_chip_init(struct tc35892 *tc35892)
-{
- int manf, ver, ret;
-
- manf = tc35892_reg_read(tc35892, TC35892_MANFCODE);
- if (manf < 0)
- return manf;
-
- ver = tc35892_reg_read(tc35892, TC35892_VERSION);
- if (ver < 0)
- return ver;
-
- if (manf != TC35892_MANFCODE_MAGIC) {
- dev_err(tc35892->dev, "unknown manufacturer: %#x\n", manf);
- return -EINVAL;
- }
-
- dev_info(tc35892->dev, "manufacturer: %#x, version: %#x\n", manf, ver);
-
- /* Put everything except the IRQ module into reset */
- ret = tc35892_reg_write(tc35892, TC35892_RSTCTRL,
- TC35892_RSTCTRL_TIMRST
- | TC35892_RSTCTRL_ROTRST
- | TC35892_RSTCTRL_KBDRST
- | TC35892_RSTCTRL_GPIRST);
- if (ret < 0)
- return ret;
-
- /* Clear the reset interrupt. */
- return tc35892_reg_write(tc35892, TC35892_RSTINTCLR, 0x1);
-}
-
-static int __devinit tc35892_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
-{
- struct tc35892_platform_data *pdata = i2c->dev.platform_data;
- struct tc35892 *tc35892;
- int ret;
-
- if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
- | I2C_FUNC_SMBUS_I2C_BLOCK))
- return -EIO;
-
- tc35892 = kzalloc(sizeof(struct tc35892), GFP_KERNEL);
- if (!tc35892)
- return -ENOMEM;
-
- mutex_init(&tc35892->lock);
-
- tc35892->dev = &i2c->dev;
- tc35892->i2c = i2c;
- tc35892->pdata = pdata;
- tc35892->irq_base = pdata->irq_base;
- tc35892->num_gpio = id->driver_data;
-
- i2c_set_clientdata(i2c, tc35892);
-
- ret = tc35892_chip_init(tc35892);
- if (ret)
- goto out_free;
-
- ret = tc35892_irq_init(tc35892);
- if (ret)
- goto out_free;
-
- ret = request_threaded_irq(tc35892->i2c->irq, NULL, tc35892_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- "tc35892", tc35892);
- if (ret) {
- dev_err(tc35892->dev, "failed to request IRQ: %d\n", ret);
- goto out_removeirq;
- }
-
- ret = mfd_add_devices(tc35892->dev, -1, tc35892_devs,
- ARRAY_SIZE(tc35892_devs), NULL,
- tc35892->irq_base);
- if (ret) {
- dev_err(tc35892->dev, "failed to add children\n");
- goto out_freeirq;
- }
-
- return 0;
-
-out_freeirq:
- free_irq(tc35892->i2c->irq, tc35892);
-out_removeirq:
- tc35892_irq_remove(tc35892);
-out_free:
- kfree(tc35892);
- return ret;
-}
-
-static int __devexit tc35892_remove(struct i2c_client *client)
-{
- struct tc35892 *tc35892 = i2c_get_clientdata(client);
-
- mfd_remove_devices(tc35892->dev);
-
- free_irq(tc35892->i2c->irq, tc35892);
- tc35892_irq_remove(tc35892);
-
- kfree(tc35892);
-
- return 0;
-}
-
-static const struct i2c_device_id tc35892_id[] = {
- { "tc35892", 24 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, tc35892_id);
-
-static struct i2c_driver tc35892_driver = {
- .driver.name = "tc35892",
- .driver.owner = THIS_MODULE,
- .probe = tc35892_probe,
- .remove = __devexit_p(tc35892_remove),
- .id_table = tc35892_id,
-};
-
-static int __init tc35892_init(void)
-{
- return i2c_add_driver(&tc35892_driver);
-}
-subsys_initcall(tc35892_init);
-
-static void __exit tc35892_exit(void)
-{
- i2c_del_driver(&tc35892_driver);
-}
-module_exit(tc35892_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("TC35892 MFD core driver");
-MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
new file mode 100644
index 0000000..729dbee
--- /dev/null
+++ b/drivers/mfd/tc3589x.c
@@ -0,0 +1,422 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tc3589x.h>
+
+#define TC3589x_CLKMODE_MODCTL_SLEEP 0x0
+#define TC3589x_CLKMODE_MODCTL_OPERATION (1 << 0)
+
+/**
+ * tc3589x_reg_read() - read a single TC3589x register
+ * @tc3589x: Device to read from
+ * @reg: Register to read
+ */
+int tc3589x_reg_read(struct tc3589x *tc3589x, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(tc3589x->i2c, reg);
+ if (ret < 0)
+ dev_err(tc3589x->dev, "failed to read reg %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_reg_read);
+
+/**
+ * tc3589x_reg_read() - write a single TC3589x register
+ * @tc3589x: Device to write to
+ * @reg: Register to read
+ * @data: Value to write
+ */
+int tc3589x_reg_write(struct tc3589x *tc3589x, u8 reg, u8 data)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(tc3589x->i2c, reg, data);
+ if (ret < 0)
+ dev_err(tc3589x->dev, "failed to write reg %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_reg_write);
+
+/**
+ * tc3589x_block_read() - read multiple TC3589x registers
+ * @tc3589x: Device to read from
+ * @reg: First register
+ * @length: Number of registers
+ * @values: Buffer to write to
+ */
+int tc3589x_block_read(struct tc3589x *tc3589x, u8 reg, u8 length, u8 *values)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(tc3589x->i2c, reg, length, values);
+ if (ret < 0)
+ dev_err(tc3589x->dev, "failed to read regs %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_block_read);
+
+/**
+ * tc3589x_block_write() - write multiple TC3589x registers
+ * @tc3589x: Device to write to
+ * @reg: First register
+ * @length: Number of registers
+ * @values: Values to write
+ */
+int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length,
+ const u8 *values)
+{
+ int ret;
+
+ ret = i2c_smbus_write_i2c_block_data(tc3589x->i2c, reg, length,
+ values);
+ if (ret < 0)
+ dev_err(tc3589x->dev, "failed to write regs %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_block_write);
+
+/**
+ * tc3589x_set_bits() - set the value of a bitfield in a TC3589x register
+ * @tc3589x: Device to write to
+ * @reg: Register to write
+ * @mask: Mask of bits to set
+ * @values: Value to set
+ */
+int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val)
+{
+ int ret;
+
+ mutex_lock(&tc3589x->lock);
+
+ ret = tc3589x_reg_read(tc3589x, reg);
+ if (ret < 0)
+ goto out;
+
+ ret &= ~mask;
+ ret |= val;
+
+ ret = tc3589x_reg_write(tc3589x, reg, ret);
+
+out:
+ mutex_unlock(&tc3589x->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_set_bits);
+
+static struct resource gpio_resources[] = {
+ {
+ .start = TC3589x_INT_GPIIRQ,
+ .end = TC3589x_INT_GPIIRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource keypad_resources[] = {
+ {
+ .start = TC3589x_INT_KBDIRQ,
+ .end = TC3589x_INT_KBDIRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell tc3589x_dev_gpio[] = {
+ {
+ .name = "tc3589x-gpio",
+ .num_resources = ARRAY_SIZE(gpio_resources),
+ .resources = &gpio_resources[0],
+ },
+};
+
+static struct mfd_cell tc3589x_dev_keypad[] = {
+ {
+ .name = "tc3589x-keypad",
+ .num_resources = ARRAY_SIZE(keypad_resources),
+ .resources = &keypad_resources[0],
+ },
+};
+
+static irqreturn_t tc3589x_irq(int irq, void *data)
+{
+ struct tc3589x *tc3589x = data;
+ int status;
+
+again:
+ status = tc3589x_reg_read(tc3589x, TC3589x_IRQST);
+ if (status < 0)
+ return IRQ_NONE;
+
+ while (status) {
+ int bit = __ffs(status);
+
+ handle_nested_irq(tc3589x->irq_base + bit);
+ status &= ~(1 << bit);
+ }
+
+ /*
+ * A dummy read or write (to any register) appears to be necessary to
+ * have the last interrupt clear (for example, GPIO IC write) take
+ * effect. In such a case, recheck for any interrupt which is still
+ * pending.
+ */
+ status = tc3589x_reg_read(tc3589x, TC3589x_IRQST);
+ if (status)
+ goto again;
+
+ return IRQ_HANDLED;
+}
+
+static int tc3589x_irq_init(struct tc3589x *tc3589x)
+{
+ int base = tc3589x->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + TC3589x_NR_INTERNAL_IRQS; irq++) {
+ set_irq_chip_data(irq, tc3589x);
+ set_irq_chip_and_handler(irq, &dummy_irq_chip,
+ handle_edge_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ return 0;
+}
+
+static void tc3589x_irq_remove(struct tc3589x *tc3589x)
+{
+ int base = tc3589x->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + TC3589x_NR_INTERNAL_IRQS; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static int tc3589x_chip_init(struct tc3589x *tc3589x)
+{
+ int manf, ver, ret;
+
+ manf = tc3589x_reg_read(tc3589x, TC3589x_MANFCODE);
+ if (manf < 0)
+ return manf;
+
+ ver = tc3589x_reg_read(tc3589x, TC3589x_VERSION);
+ if (ver < 0)
+ return ver;
+
+ if (manf != TC3589x_MANFCODE_MAGIC) {
+ dev_err(tc3589x->dev, "unknown manufacturer: %#x\n", manf);
+ return -EINVAL;
+ }
+
+ dev_info(tc3589x->dev, "manufacturer: %#x, version: %#x\n", manf, ver);
+
+ /*
+ * Put everything except the IRQ module into reset;
+ * also spare the GPIO module for any pin initialization
+ * done during pre-kernel boot
+ */
+ ret = tc3589x_reg_write(tc3589x, TC3589x_RSTCTRL,
+ TC3589x_RSTCTRL_TIMRST
+ | TC3589x_RSTCTRL_ROTRST
+ | TC3589x_RSTCTRL_KBDRST);
+ if (ret < 0)
+ return ret;
+
+ /* Clear the reset interrupt. */
+ return tc3589x_reg_write(tc3589x, TC3589x_RSTINTCLR, 0x1);
+}
+
+static int __devinit tc3589x_device_init(struct tc3589x *tc3589x)
+{
+ int ret = 0;
+ unsigned int blocks = tc3589x->pdata->block;
+
+ if (blocks & TC3589x_BLOCK_GPIO) {
+ ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
+ ARRAY_SIZE(tc3589x_dev_gpio), NULL,
+ tc3589x->irq_base);
+ if (ret) {
+ dev_err(tc3589x->dev, "failed to add gpio child\n");
+ return ret;
+ }
+ dev_info(tc3589x->dev, "added gpio block\n");
+ }
+
+ if (blocks & TC3589x_BLOCK_KEYPAD) {
+ ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
+ ARRAY_SIZE(tc3589x_dev_keypad), NULL,
+ tc3589x->irq_base);
+ if (ret) {
+ dev_err(tc3589x->dev, "failed to keypad child\n");
+ return ret;
+ }
+ dev_info(tc3589x->dev, "added keypad block\n");
+ }
+
+ return ret;
+}
+
+static int __devinit tc3589x_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct tc3589x_platform_data *pdata = i2c->dev.platform_data;
+ struct tc3589x *tc3589x;
+ int ret;
+
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
+ | I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -EIO;
+
+ tc3589x = kzalloc(sizeof(struct tc3589x), GFP_KERNEL);
+ if (!tc3589x)
+ return -ENOMEM;
+
+ mutex_init(&tc3589x->lock);
+
+ tc3589x->dev = &i2c->dev;
+ tc3589x->i2c = i2c;
+ tc3589x->pdata = pdata;
+ tc3589x->irq_base = pdata->irq_base;
+ tc3589x->num_gpio = id->driver_data;
+
+ i2c_set_clientdata(i2c, tc3589x);
+
+ ret = tc3589x_chip_init(tc3589x);
+ if (ret)
+ goto out_free;
+
+ ret = tc3589x_irq_init(tc3589x);
+ if (ret)
+ goto out_free;
+
+ ret = request_threaded_irq(tc3589x->i2c->irq, NULL, tc3589x_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "tc3589x", tc3589x);
+ if (ret) {
+ dev_err(tc3589x->dev, "failed to request IRQ: %d\n", ret);
+ goto out_removeirq;
+ }
+
+ ret = tc3589x_device_init(tc3589x);
+ if (ret) {
+ dev_err(tc3589x->dev, "failed to add child devices\n");
+ goto out_freeirq;
+ }
+
+ return 0;
+
+out_freeirq:
+ free_irq(tc3589x->i2c->irq, tc3589x);
+out_removeirq:
+ tc3589x_irq_remove(tc3589x);
+out_free:
+ kfree(tc3589x);
+ return ret;
+}
+
+static int __devexit tc3589x_remove(struct i2c_client *client)
+{
+ struct tc3589x *tc3589x = i2c_get_clientdata(client);
+
+ mfd_remove_devices(tc3589x->dev);
+
+ free_irq(tc3589x->i2c->irq, tc3589x);
+ tc3589x_irq_remove(tc3589x);
+
+ kfree(tc3589x);
+
+ return 0;
+}
+
+static int tc3589x_suspend(struct device *dev)
+{
+ struct tc3589x *tc3589x = dev_get_drvdata(dev);
+ struct i2c_client *client = tc3589x->i2c;
+ int ret = 0;
+
+ /* put the system to sleep mode */
+ if (!device_may_wakeup(&client->dev))
+ ret = tc3589x_reg_write(tc3589x, TC3589x_CLKMODE,
+ TC3589x_CLKMODE_MODCTL_SLEEP);
+
+ return ret;
+}
+
+static int tc3589x_resume(struct device *dev)
+{
+ struct tc3589x *tc3589x = dev_get_drvdata(dev);
+ struct i2c_client *client = tc3589x->i2c;
+ int ret = 0;
+
+ /* enable the system into operation */
+ if (!device_may_wakeup(&client->dev))
+ ret = tc3589x_reg_write(tc3589x, TC3589x_CLKMODE,
+ TC3589x_CLKMODE_MODCTL_OPERATION);
+
+ return ret;
+}
+
+static const SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend,
+ tc3589x_resume);
+
+static const struct i2c_device_id tc3589x_id[] = {
+ { "tc3589x", 24 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tc3589x_id);
+
+static struct i2c_driver tc3589x_driver = {
+ .driver.name = "tc3589x",
+ .driver.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .driver.pm = &tc3589x_dev_pm_ops,
+#endif
+ .probe = tc3589x_probe,
+ .remove = __devexit_p(tc3589x_remove),
+ .id_table = tc3589x_id,
+};
+
+static int __init tc3589x_init(void)
+{
+ return i2c_add_driver(&tc3589x_driver);
+}
+subsys_initcall(tc3589x_init);
+
+static void __exit tc3589x_exit(void)
+{
+ i2c_del_driver(&tc3589x_driver);
+}
+module_exit(tc3589x_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TC3589x MFD core driver");
+MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/net/caif/caif_shm_u5500.c b/drivers/net/caif/caif_shm_u5500.c
index 32b1c6f..5f771ab 100644
--- a/drivers/net/caif/caif_shm_u5500.c
+++ b/drivers/net/caif/caif_shm_u5500.c
@@ -11,7 +11,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/netdevice.h>
-#include <mach/mbox.h>
+#include <mach/mbox-db5500.h>
#include <net/caif/caif_shm.h>
MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index c80a7a6..de886f3 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -215,7 +215,8 @@
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
|| ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
- || MACH_VPAC270 || MACH_BALLOON3)
+ || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
+ || MACH_COLIBRI320)
select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index a565300..29935ea 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -71,6 +71,8 @@
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
+pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += pxa2xx_colibri.o
+pxa2xx-obj-$(CONFIG_MACH_COLIBRI320) += pxa2xx_colibri.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
index dbbdd00..453c54c 100644
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -39,12 +39,10 @@
static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
uint16_t ver;
- int ret;
- static void __iomem *fpga_ver;
ver = __raw_readw(BALLOON3_FPGA_VER);
- if (ver > 0x0201)
- pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ if (ver < 0x4f08)
+ pr_warn("The FPGA code, version 0x%04x, is too old. "
"PCMCIA/CF support might be broken in this version!",
ver);
@@ -97,8 +95,9 @@
static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
- __raw_writew((state->flags & SS_RESET) ? BALLOON3_CF_RESET : 0,
- BALLOON3_CF_CONTROL_REG);
+ __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG |
+ ((state->flags & SS_RESET) ?
+ BALLOON3_FPGA_SETnCLR : 0));
return 0;
}
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index ae07b4d..3755e7c 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
+#include <mach/smemc.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
@@ -116,37 +117,49 @@
static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
{
- MCMEM(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCMEM(sock));
+
return 0;
}
static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
{
- MCIO(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCIO(sock));
+
return 0;
}
static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
{
- MCATT(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCATT(sock));
+
return 0;
}
@@ -166,8 +179,8 @@
static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
{
- unsigned int clk = get_memclk_frequency_10khz();
- return pxa2xx_pcmcia_set_mcxx(skt, clk);
+ unsigned long clk = clk_get_rate(skt->clk);
+ return pxa2xx_pcmcia_set_mcxx(skt, clk / 10000);
}
#ifdef CONFIG_CPU_FREQ
@@ -205,19 +218,18 @@
static void pxa2xx_configure_sockets(struct device *dev)
{
struct pcmcia_low_level *ops = dev->platform_data;
-
/*
* We have at least one socket, so set MECR:CIT
* (Card Is There)
*/
- MECR |= MECR_CIT;
+ uint32_t mecr = MECR_CIT;
/* Set MECR:NOS (Number Of Sockets) */
if ((ops->first + ops->nr) > 1 ||
machine_is_viper() || machine_is_arcom_zeus())
- MECR |= MECR_NOS;
- else
- MECR &= ~MECR_NOS;
+ mecr |= MECR_NOS;
+
+ __raw_writel(mecr, MECR);
}
static const char *skt_names[] = {
@@ -270,24 +282,41 @@
struct pcmcia_low_level *ops;
struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
+ struct clk *clk;
ops = (struct pcmcia_low_level *)dev->dev.platform_data;
- if (!ops)
+ if (!ops) {
+ ret = -ENODEV;
+ goto err0;
+ }
+
+ if (cpu_is_pxa320() && ops->nr > 1) {
+ dev_err(&dev->dev, "pxa320 supports only one pcmcia slot");
+ ret = -EINVAL;
+ goto err0;
+ }
+
+ clk = clk_get(&dev->dev, NULL);
+ if (!clk)
return -ENODEV;
pxa2xx_drv_pcmcia_ops(ops);
sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
- if (!sinfo)
+ if (!sinfo) {
+ clk_put(clk);
return -ENOMEM;
+ }
sinfo->nskt = ops->nr;
+ sinfo->clk = clk;
/* Initialize processor specific parameters */
for (i = 0; i < ops->nr; i++) {
skt = &sinfo->skt[i];
skt->nr = ops->first + i;
+ skt->clk = clk;
skt->ops = ops;
skt->socket.owner = ops->owner;
skt->socket.dev.parent = &dev->dev;
@@ -295,18 +324,26 @@
ret = pxa2xx_drv_pcmcia_add_one(skt);
if (ret)
- break;
+ goto err1;
}
if (ret) {
while (--i >= 0)
soc_pcmcia_remove_one(&sinfo->skt[i]);
kfree(sinfo);
+ clk_put(clk);
} else {
pxa2xx_configure_sockets(&dev->dev);
dev_set_drvdata(&dev->dev, sinfo);
}
+ return 0;
+
+err1:
+ while (--i >= 0)
+ soc_pcmcia_remove_one(&sinfo->skt[i]);
+ kfree(sinfo);
+err0:
return ret;
}
@@ -320,6 +357,7 @@
for (i = 0; i < sinfo->nskt; i++)
soc_pcmcia_remove_one(&sinfo->skt[i]);
+ clk_put(sinfo->clk);
kfree(sinfo);
return 0;
}
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
new file mode 100644
index 0000000..c3f7219
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -0,0 +1,229 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_colibri.c
+ *
+ * Driver for Toradex Colibri PXA270 CF socket
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define COLIBRI270_RESET_GPIO 53
+#define COLIBRI270_PPEN_GPIO 107
+#define COLIBRI270_BVD1_GPIO 83
+#define COLIBRI270_BVD2_GPIO 82
+#define COLIBRI270_DETECT_GPIO 84
+#define COLIBRI270_READY_GPIO 1
+
+#define COLIBRI320_RESET_GPIO 77
+#define COLIBRI320_PPEN_GPIO 57
+#define COLIBRI320_BVD1_GPIO 53
+#define COLIBRI320_BVD2_GPIO 79
+#define COLIBRI320_DETECT_GPIO 81
+#define COLIBRI320_READY_GPIO 29
+
+static struct {
+ int reset_gpio;
+ int ppen_gpio;
+ int bvd1_gpio;
+ int bvd2_gpio;
+ int detect_gpio;
+ int ready_gpio;
+} colibri_pcmcia_gpio;
+
+static struct pcmcia_irqs colibri_irqs[] = {
+ {
+ .sock = 0,
+ .str = "PCMCIA CD"
+ },
+};
+
+static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret;
+
+ ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
+ if (ret)
+ goto err4;
+
+ ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
+ if (ret)
+ goto err4;
+ ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
+ if (ret)
+ goto err5;
+
+ ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
+ if (ret)
+ goto err5;
+ ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
+ if (ret)
+ goto err6;
+
+ ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
+ if (ret)
+ goto err6;
+ ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
+ if (ret)
+ goto err7;
+
+ colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
+ skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
+
+ return soc_pcmcia_request_irqs(skt, colibri_irqs,
+ ARRAY_SIZE(colibri_irqs));
+
+err7:
+ gpio_free(colibri_pcmcia_gpio.detect_gpio);
+err6:
+ gpio_free(colibri_pcmcia_gpio.ready_gpio);
+err5:
+ gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
+err4:
+ gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
+err3:
+ gpio_free(colibri_pcmcia_gpio.reset_gpio);
+err2:
+ gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+err1:
+ return ret;
+}
+
+static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ gpio_free(colibri_pcmcia_gpio.detect_gpio);
+ gpio_free(colibri_pcmcia_gpio.ready_gpio);
+ gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
+ gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
+ gpio_free(colibri_pcmcia_gpio.reset_gpio);
+ gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+}
+
+static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+
+ state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
+ state->ready = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
+ state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
+ state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
+ state->wrprot = 0;
+ state->vs_3v = 1;
+ state->vs_Xv = 0;
+}
+
+static int
+colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
+ !(state->Vcc == 33 && state->Vpp < 50));
+ gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET);
+ return 0;
+}
+
+static void colibri_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void colibri_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level colibri_pcmcia_ops = {
+ .owner = THIS_MODULE,
+
+ .first = 0,
+ .nr = 1,
+
+ .hw_init = colibri_pcmcia_hw_init,
+ .hw_shutdown = colibri_pcmcia_hw_shutdown,
+
+ .socket_state = colibri_pcmcia_socket_state,
+ .configure_socket = colibri_pcmcia_configure_socket,
+
+ .socket_init = colibri_pcmcia_socket_init,
+ .socket_suspend = colibri_pcmcia_socket_suspend,
+};
+
+static struct platform_device *colibri_pcmcia_device;
+
+static int __init colibri_pcmcia_init(void)
+{
+ int ret;
+
+ colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!colibri_pcmcia_device)
+ return -ENOMEM;
+
+ /* Colibri PXA270 */
+ if (machine_is_colibri()) {
+ colibri_pcmcia_gpio.reset_gpio = COLIBRI270_RESET_GPIO;
+ colibri_pcmcia_gpio.ppen_gpio = COLIBRI270_PPEN_GPIO;
+ colibri_pcmcia_gpio.bvd1_gpio = COLIBRI270_BVD1_GPIO;
+ colibri_pcmcia_gpio.bvd2_gpio = COLIBRI270_BVD2_GPIO;
+ colibri_pcmcia_gpio.detect_gpio = COLIBRI270_DETECT_GPIO;
+ colibri_pcmcia_gpio.ready_gpio = COLIBRI270_READY_GPIO;
+ /* Colibri PXA320 */
+ } else if (machine_is_colibri320()) {
+ colibri_pcmcia_gpio.reset_gpio = COLIBRI320_RESET_GPIO;
+ colibri_pcmcia_gpio.ppen_gpio = COLIBRI320_PPEN_GPIO;
+ colibri_pcmcia_gpio.bvd1_gpio = COLIBRI320_BVD1_GPIO;
+ colibri_pcmcia_gpio.bvd2_gpio = COLIBRI320_BVD2_GPIO;
+ colibri_pcmcia_gpio.detect_gpio = COLIBRI320_DETECT_GPIO;
+ colibri_pcmcia_gpio.ready_gpio = COLIBRI320_READY_GPIO;
+ }
+
+ ret = platform_device_add_data(colibri_pcmcia_device,
+ &colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(colibri_pcmcia_device);
+
+ if (ret)
+ platform_device_put(colibri_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit colibri_pcmcia_exit(void)
+{
+ platform_device_unregister(colibri_pcmcia_device);
+}
+
+module_init(colibri_pcmcia_init);
+module_exit(colibri_pcmcia_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index bbcd538..9daa736 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -10,6 +10,7 @@
#define _ASM_ARCH_PCMCIA
/* include the world */
+#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
@@ -29,6 +30,7 @@
* Info from low level handler
*/
unsigned int nr;
+ struct clk *clk;
/*
* Core PCMCIA state
@@ -56,6 +58,7 @@
struct skt_dev_info {
int nskt;
+ struct clk *clk;
struct soc_pcmcia_socket skt[0];
};
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 67eb377..5a7c8f1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -41,6 +41,7 @@
default y if MFD_TC6393XB
default y if ARCH_W90X900
default y if ARCH_DAVINCI_DA8XX
+ default y if ARCH_CNS3XXX
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
@@ -66,6 +67,7 @@
default y if ARCH_AT91SAM9G45
default y if ARCH_MXC
default y if ARCH_OMAP3
+ default y if ARCH_CNS3XXX
default PCI
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 5bdbfe6..77b1eb5 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -93,9 +93,9 @@
/* workaround ENGcm09152 for i.MX35 */
if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
- v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+ v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
USBPHYCTRL_OTGBASE_OFFSET));
- writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+ writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
USBPHYCTRL_OTGBASE_OFFSET));
}
#endif
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6f4f8e6..f8970d1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -147,6 +147,14 @@
---help---
Enables support for the W90X900 USB controller
+config USB_CNS3XXX_EHCI
+ bool "Cavium CNS3XXX EHCI Module"
+ depends on USB_EHCI_HCD && ARCH_CNS3XXX
+ ---help---
+ Enable support for the CNS3XXX SOC's on-chip EHCI controller.
+ It is needed for high-speed (480Mbit/sec) USB 2.0 device
+ support.
+
config USB_OXU210HP_HCD
tristate "OXU210HP HCD support"
depends on USB
@@ -286,6 +294,13 @@
If unsure, say N.
+config USB_CNS3XXX_OHCI
+ bool "Cavium CNS3XXX OHCI Module"
+ depends on USB_OHCI_HCD && ARCH_CNS3XXX
+ ---help---
+ Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+ It is needed for low-speed USB 1.0 device support.
+
config USB_OHCI_BIG_ENDIAN_DESC
bool
depends on USB_OHCI_HCD
diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c
new file mode 100644
index 0000000..708a05b
--- /dev/null
+++ b/drivers/usb/host/ehci-cns3xxx.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int cns3xxx_ehci_init(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ *
+ * Set USB AHB INCR length to 16
+ */
+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
+ cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+ cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+ cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+ __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+ MISC_CHIP_CONFIG_REG);
+ }
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs
+ + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ hcd->has_tt = 0;
+ ehci_reset(ehci);
+
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ ehci_port_power(ehci, 0);
+
+ return retval;
+}
+
+static const struct hc_driver cns3xxx_ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "CNS3XXX EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .reset = cns3xxx_ehci_init,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+ .get_frame_number = ehci_get_frame,
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int cns3xxx_ehci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd;
+ const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
+ struct resource *res;
+ int irq;
+ int retval;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "Found HC with no IRQ.\n");
+ return -ENODEV;
+ }
+ irq = res->start;
+
+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Found HC with no register addr.\n");
+ retval = -ENODEV;
+ goto err1;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+ dev_dbg(dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (hcd->regs == NULL) {
+ dev_dbg(dev, "error mapping memory\n");
+ retval = -EFAULT;
+ goto err2;
+ }
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval == 0)
+ return retval;
+
+ iounmap(hcd->regs);
+err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+ usb_put_hcd(hcd);
+
+ return retval;
+}
+
+static int cns3xxx_ehci_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ */
+ if (atomic_dec_return(&usb_pwr_ref) == 0)
+ cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+ usb_put_hcd(hcd);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ehci");
+
+static struct platform_driver cns3xxx_ehci_driver = {
+ .probe = cns3xxx_ehci_probe,
+ .remove = cns3xxx_ehci_remove,
+ .driver = {
+ .name = "cns3xxx-ehci",
+ },
+};
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e906280..d0c8f7c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1216,6 +1216,11 @@
#define PLATFORM_DRIVER ehci_octeon_driver
#endif
+#ifdef CONFIG_USB_CNS3XXX_EHCI
+#include "ehci-cns3xxx.c"
+#define PLATFORM_DRIVER cns3xxx_ehci_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index bce8505..a22d2df 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -28,7 +28,7 @@
#define ULPI_VIEWPORT_OFFSET 0x170
struct ehci_mxc_priv {
- struct clk *usbclk, *ahbclk;
+ struct clk *usbclk, *ahbclk, *phy1clk;
struct usb_hcd *hcd;
};
@@ -168,17 +168,6 @@
goto err_ioremap;
}
- /* call platform specific init function */
- if (pdata->init) {
- ret = pdata->init(pdev);
- if (ret) {
- dev_err(dev, "platform init failed\n");
- goto err_init;
- }
- /* platforms need some time to settle changed IO settings */
- mdelay(10);
- }
-
/* enable clocks */
priv->usbclk = clk_get(dev, "usb");
if (IS_ERR(priv->usbclk)) {
@@ -196,6 +185,28 @@
clk_enable(priv->ahbclk);
}
+ /* "dr" device has its own clock */
+ if (pdev->id == 0) {
+ priv->phy1clk = clk_get(dev, "usb_phy1");
+ if (IS_ERR(priv->phy1clk)) {
+ ret = PTR_ERR(priv->phy1clk);
+ goto err_clk_phy;
+ }
+ clk_enable(priv->phy1clk);
+ }
+
+
+ /* call platform specific init function */
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret) {
+ dev_err(dev, "platform init failed\n");
+ goto err_init;
+ }
+ /* platforms need some time to settle changed IO settings */
+ mdelay(10);
+ }
+
/* setup specific usb hw */
ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
if (ret < 0)
@@ -230,6 +241,11 @@
if (pdata && pdata->exit)
pdata->exit(pdev);
err_init:
+ if (priv->phy1clk) {
+ clk_disable(priv->phy1clk);
+ clk_put(priv->phy1clk);
+ }
+err_clk_phy:
if (priv->ahbclk) {
clk_disable(priv->ahbclk);
clk_put(priv->ahbclk);
@@ -273,6 +289,10 @@
clk_disable(priv->ahbclk);
clk_put(priv->ahbclk);
}
+ if (priv->phy1clk) {
+ clk_disable(priv->phy1clk);
+ clk_put(priv->phy1clk);
+ }
kfree(priv);
diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c
new file mode 100644
index 0000000..f05ef87
--- /dev/null
+++ b/drivers/usb/host/ohci-cns3xxx.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int __devinit
+cns3xxx_ohci_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ *
+ * Set USB AHB INCR length to 16
+ */
+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
+ cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+ cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+ cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+ __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+ MISC_CHIP_CONFIG_REG);
+ }
+
+ ret = ohci_init(ohci);
+ if (ret < 0)
+ return ret;
+
+ ohci->num_ports = 1;
+
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ err("can't start %s", hcd->self.bus_name);
+ ohci_stop(hcd);
+ return ret;
+ }
+ return 0;
+}
+
+static const struct hc_driver cns3xxx_ohci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "CNS3XXX OHCI Host controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+ .start = cns3xxx_ohci_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+ .get_frame_number = ohci_get_frame,
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int cns3xxx_ohci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd;
+ const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
+ struct resource *res;
+ int irq;
+ int retval;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "Found HC with no IRQ.\n");
+ return -ENODEV;
+ }
+ irq = res->start;
+
+ hcd = usb_create_hcd(driver, dev, dev_name(dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Found HC with no register addr.\n");
+ retval = -ENODEV;
+ goto err1;
+ }
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+ dev_dbg(dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_dbg(dev, "error mapping memory\n");
+ retval = -EFAULT;
+ goto err2;
+ }
+
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval == 0)
+ return retval;
+
+ iounmap(hcd->regs);
+err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+ usb_put_hcd(hcd);
+ return retval;
+}
+
+static int cns3xxx_ohci_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ */
+ if (atomic_dec_return(&usb_pwr_ref) == 0)
+ cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+ usb_put_hcd(hcd);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ohci");
+
+static struct platform_driver ohci_hcd_cns3xxx_driver = {
+ .probe = cns3xxx_ohci_probe,
+ .remove = cns3xxx_ohci_remove,
+ .driver = {
+ .name = "cns3xxx-ohci",
+ },
+};
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 5179acb..5cb6731 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1111,6 +1111,11 @@
#define PLATFORM_DRIVER ohci_octeon_driver
#endif
+#ifdef CONFIG_USB_CNS3XXX_OHCI
+#include "ohci-cns3xxx.c"
+#define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
+#endif
+
#if !defined(PCI_DRIVER) && \
!defined(PLATFORM_DRIVER) && \
!defined(OMAP1_PLATFORM_DRIVER) && \
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 27c1fb4..ab77297 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1850,6 +1850,16 @@
<file:Documentation/fb/pxafb.txt> describes the available parameters.
+config PXA3XX_GCU
+ tristate "PXA3xx 2D graphics accelerator driver"
+ depends on FB_PXA
+ help
+ Kernelspace driver for the 2D graphics controller unit (GCU)
+ found on PXA3xx processors. There is a counterpart driver in the
+ DirectFB suite, see http://www.directfb.org/
+
+ If you compile this as a module, it will be called pxa3xx_gcu.
+
config FB_MBX
tristate "2700G LCD framebuffer support"
depends on FB && ARCH_PXA
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 485e8ed..9260a89 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -100,6 +100,7 @@
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
obj-$(CONFIG_FB_PXA168) += pxa168fb.o
+obj-$(CONFIG_PXA3XX_GCU) += pxa3xx-gcu.o
obj-$(CONFIG_FB_W100) += w100fb.o
obj-$(CONFIG_FB_TMIO) += tmiofb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/pxa3xx-gcu.c
new file mode 100644
index 0000000..b81168d
--- /dev/null
+++ b/drivers/video/pxa3xx-gcu.c
@@ -0,0 +1,772 @@
+/*
+ * pxa3xx-gc.c - Linux kernel module for PXA3xx graphics controllers
+ *
+ * This driver needs a DirectFB counterpart in user space, communication
+ * is handled via mmap()ed memory areas and an ioctl.
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (c) 2009 Janine Kropp <nin@directfb.org>
+ * Copyright (c) 2009 Denis Oliver Kropp <dok@directfb.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * WARNING: This controller is attached to System Bus 2 of the PXA which
+ * needs its arbiter to be enabled explictly (CKENB & 1<<9).
+ * There is currently no way to do this from Linux, so you need to teach
+ * your bootloader for now.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/ioctl.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+
+#include "pxa3xx-gcu.h"
+
+#define DRV_NAME "pxa3xx-gcu"
+#define MISCDEV_MINOR 197
+
+#define REG_GCCR 0x00
+#define GCCR_SYNC_CLR (1 << 9)
+#define GCCR_BP_RST (1 << 8)
+#define GCCR_ABORT (1 << 6)
+#define GCCR_STOP (1 << 4)
+
+#define REG_GCISCR 0x04
+#define REG_GCIECR 0x08
+#define REG_GCRBBR 0x20
+#define REG_GCRBLR 0x24
+#define REG_GCRBHR 0x28
+#define REG_GCRBTR 0x2C
+#define REG_GCRBEXHR 0x30
+
+#define IE_EOB (1 << 0)
+#define IE_EEOB (1 << 5)
+#define IE_ALL 0xff
+
+#define SHARED_SIZE PAGE_ALIGN(sizeof(struct pxa3xx_gcu_shared))
+
+/* #define PXA3XX_GCU_DEBUG */
+/* #define PXA3XX_GCU_DEBUG_TIMER */
+
+#ifdef PXA3XX_GCU_DEBUG
+#define QDUMP(msg) \
+ do { \
+ QPRINT(priv, KERN_DEBUG, msg); \
+ } while (0)
+#else
+#define QDUMP(msg) do {} while (0)
+#endif
+
+#define QERROR(msg) \
+ do { \
+ QPRINT(priv, KERN_ERR, msg); \
+ } while (0)
+
+struct pxa3xx_gcu_batch {
+ struct pxa3xx_gcu_batch *next;
+ u32 *ptr;
+ dma_addr_t phys;
+ unsigned long length;
+};
+
+struct pxa3xx_gcu_priv {
+ void __iomem *mmio_base;
+ struct clk *clk;
+ struct pxa3xx_gcu_shared *shared;
+ dma_addr_t shared_phys;
+ struct resource *resource_mem;
+ struct miscdevice misc_dev;
+ struct file_operations misc_fops;
+ wait_queue_head_t wait_idle;
+ wait_queue_head_t wait_free;
+ spinlock_t spinlock;
+ struct timeval base_time;
+
+ struct pxa3xx_gcu_batch *free;
+
+ struct pxa3xx_gcu_batch *ready;
+ struct pxa3xx_gcu_batch *ready_last;
+ struct pxa3xx_gcu_batch *running;
+};
+
+static inline unsigned long
+gc_readl(struct pxa3xx_gcu_priv *priv, unsigned int off)
+{
+ return __raw_readl(priv->mmio_base + off);
+}
+
+static inline void
+gc_writel(struct pxa3xx_gcu_priv *priv, unsigned int off, unsigned long val)
+{
+ __raw_writel(val, priv->mmio_base + off);
+}
+
+#define QPRINT(priv, level, msg) \
+ do { \
+ struct timeval tv; \
+ struct pxa3xx_gcu_shared *shared = priv->shared; \
+ u32 base = gc_readl(priv, REG_GCRBBR); \
+ \
+ do_gettimeofday(&tv); \
+ \
+ printk(level "%ld.%03ld.%03ld - %-17s: %-21s (%s, " \
+ "STATUS " \
+ "0x%02lx, B 0x%08lx [%ld], E %5ld, H %5ld, " \
+ "T %5ld)\n", \
+ tv.tv_sec - priv->base_time.tv_sec, \
+ tv.tv_usec / 1000, tv.tv_usec % 1000, \
+ __func__, msg, \
+ shared->hw_running ? "running" : " idle", \
+ gc_readl(priv, REG_GCISCR), \
+ gc_readl(priv, REG_GCRBBR), \
+ gc_readl(priv, REG_GCRBLR), \
+ (gc_readl(priv, REG_GCRBEXHR) - base) / 4, \
+ (gc_readl(priv, REG_GCRBHR) - base) / 4, \
+ (gc_readl(priv, REG_GCRBTR) - base) / 4); \
+ } while (0)
+
+static void
+pxa3xx_gcu_reset(struct pxa3xx_gcu_priv *priv)
+{
+ QDUMP("RESET");
+
+ /* disable interrupts */
+ gc_writel(priv, REG_GCIECR, 0);
+
+ /* reset hardware */
+ gc_writel(priv, REG_GCCR, GCCR_ABORT);
+ gc_writel(priv, REG_GCCR, 0);
+
+ memset(priv->shared, 0, SHARED_SIZE);
+ priv->shared->buffer_phys = priv->shared_phys;
+ priv->shared->magic = PXA3XX_GCU_SHARED_MAGIC;
+
+ do_gettimeofday(&priv->base_time);
+
+ /* set up the ring buffer pointers */
+ gc_writel(priv, REG_GCRBLR, 0);
+ gc_writel(priv, REG_GCRBBR, priv->shared_phys);
+ gc_writel(priv, REG_GCRBTR, priv->shared_phys);
+
+ /* enable all IRQs except EOB */
+ gc_writel(priv, REG_GCIECR, IE_ALL & ~IE_EOB);
+}
+
+static void
+dump_whole_state(struct pxa3xx_gcu_priv *priv)
+{
+ struct pxa3xx_gcu_shared *sh = priv->shared;
+ u32 base = gc_readl(priv, REG_GCRBBR);
+
+ QDUMP("DUMP");
+
+ printk(KERN_DEBUG "== PXA3XX-GCU DUMP ==\n"
+ "%s, STATUS 0x%02lx, B 0x%08lx [%ld], E %5ld, H %5ld, T %5ld\n",
+ sh->hw_running ? "running" : "idle ",
+ gc_readl(priv, REG_GCISCR),
+ gc_readl(priv, REG_GCRBBR),
+ gc_readl(priv, REG_GCRBLR),
+ (gc_readl(priv, REG_GCRBEXHR) - base) / 4,
+ (gc_readl(priv, REG_GCRBHR) - base) / 4,
+ (gc_readl(priv, REG_GCRBTR) - base) / 4);
+}
+
+static void
+flush_running(struct pxa3xx_gcu_priv *priv)
+{
+ struct pxa3xx_gcu_batch *running = priv->running;
+ struct pxa3xx_gcu_batch *next;
+
+ while (running) {
+ next = running->next;
+ running->next = priv->free;
+ priv->free = running;
+ running = next;
+ }
+
+ priv->running = NULL;
+}
+
+static void
+run_ready(struct pxa3xx_gcu_priv *priv)
+{
+ unsigned int num = 0;
+ struct pxa3xx_gcu_shared *shared = priv->shared;
+ struct pxa3xx_gcu_batch *ready = priv->ready;
+
+ QDUMP("Start");
+
+ BUG_ON(!ready);
+
+ shared->buffer[num++] = 0x05000000;
+
+ while (ready) {
+ shared->buffer[num++] = 0x00000001;
+ shared->buffer[num++] = ready->phys;
+ ready = ready->next;
+ }
+
+ shared->buffer[num++] = 0x05000000;
+ priv->running = priv->ready;
+ priv->ready = priv->ready_last = NULL;
+ gc_writel(priv, REG_GCRBLR, 0);
+ shared->hw_running = 1;
+
+ /* ring base address */
+ gc_writel(priv, REG_GCRBBR, shared->buffer_phys);
+
+ /* ring tail address */
+ gc_writel(priv, REG_GCRBTR, shared->buffer_phys + num * 4);
+
+ /* ring length */
+ gc_writel(priv, REG_GCRBLR, ((num + 63) & ~63) * 4);
+}
+
+static irqreturn_t
+pxa3xx_gcu_handle_irq(int irq, void *ctx)
+{
+ struct pxa3xx_gcu_priv *priv = ctx;
+ struct pxa3xx_gcu_shared *shared = priv->shared;
+ u32 status = gc_readl(priv, REG_GCISCR) & IE_ALL;
+
+ QDUMP("-Interrupt");
+
+ if (!status)
+ return IRQ_NONE;
+
+ spin_lock(&priv->spinlock);
+ shared->num_interrupts++;
+
+ if (status & IE_EEOB) {
+ QDUMP(" [EEOB]");
+
+ flush_running(priv);
+ wake_up_all(&priv->wait_free);
+
+ if (priv->ready) {
+ run_ready(priv);
+ } else {
+ /* There is no more data prepared by the userspace.
+ * Set hw_running = 0 and wait for the next userspace
+ * kick-off */
+ shared->num_idle++;
+ shared->hw_running = 0;
+
+ QDUMP(" '-> Idle.");
+
+ /* set ring buffer length to zero */
+ gc_writel(priv, REG_GCRBLR, 0);
+
+ wake_up_all(&priv->wait_idle);
+ }
+
+ shared->num_done++;
+ } else {
+ QERROR(" [???]");
+ dump_whole_state(priv);
+ }
+
+ /* Clear the interrupt */
+ gc_writel(priv, REG_GCISCR, status);
+ spin_unlock(&priv->spinlock);
+
+ return IRQ_HANDLED;
+}
+
+static int
+pxa3xx_gcu_wait_idle(struct pxa3xx_gcu_priv *priv)
+{
+ int ret = 0;
+
+ QDUMP("Waiting for idle...");
+
+ /* Does not need to be atomic. There's a lock in user space,
+ * but anyhow, this is just for statistics. */
+ priv->shared->num_wait_idle++;
+
+ while (priv->shared->hw_running) {
+ int num = priv->shared->num_interrupts;
+ u32 rbexhr = gc_readl(priv, REG_GCRBEXHR);
+
+ ret = wait_event_interruptible_timeout(priv->wait_idle,
+ !priv->shared->hw_running, HZ*4);
+
+ if (ret < 0)
+ break;
+
+ if (ret > 0)
+ continue;
+
+ if (gc_readl(priv, REG_GCRBEXHR) == rbexhr &&
+ priv->shared->num_interrupts == num) {
+ QERROR("TIMEOUT");
+ ret = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ QDUMP("done");
+
+ return ret;
+}
+
+static int
+pxa3xx_gcu_wait_free(struct pxa3xx_gcu_priv *priv)
+{
+ int ret = 0;
+
+ QDUMP("Waiting for free...");
+
+ /* Does not need to be atomic. There's a lock in user space,
+ * but anyhow, this is just for statistics. */
+ priv->shared->num_wait_free++;
+
+ while (!priv->free) {
+ u32 rbexhr = gc_readl(priv, REG_GCRBEXHR);
+
+ ret = wait_event_interruptible_timeout(priv->wait_free,
+ priv->free, HZ*4);
+
+ if (ret < 0)
+ break;
+
+ if (ret > 0)
+ continue;
+
+ if (gc_readl(priv, REG_GCRBEXHR) == rbexhr) {
+ QERROR("TIMEOUT");
+ ret = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ QDUMP("done");
+
+ return ret;
+}
+
+/* Misc device layer */
+
+static ssize_t
+pxa3xx_gcu_misc_write(struct file *filp, const char *buff,
+ size_t count, loff_t *offp)
+{
+ int ret;
+ unsigned long flags;
+ struct pxa3xx_gcu_batch *buffer;
+ struct pxa3xx_gcu_priv *priv =
+ container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+ int words = count / 4;
+
+ /* Does not need to be atomic. There's a lock in user space,
+ * but anyhow, this is just for statistics. */
+ priv->shared->num_writes++;
+
+ priv->shared->num_words += words;
+
+ /* Last word reserved for batch buffer end command */
+ if (words >= PXA3XX_GCU_BATCH_WORDS)
+ return -E2BIG;
+
+ /* Wait for a free buffer */
+ if (!priv->free) {
+ ret = pxa3xx_gcu_wait_free(priv);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * Get buffer from free list
+ */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ buffer = priv->free;
+ priv->free = buffer->next;
+
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+
+ /* Copy data from user into buffer */
+ ret = copy_from_user(buffer->ptr, buff, words * 4);
+ if (ret) {
+ spin_lock_irqsave(&priv->spinlock, flags);
+ buffer->next = priv->free;
+ priv->free = buffer;
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+ return ret;
+ }
+
+ buffer->length = words;
+
+ /* Append batch buffer end command */
+ buffer->ptr[words] = 0x01000000;
+
+ /*
+ * Add buffer to ready list
+ */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ buffer->next = NULL;
+
+ if (priv->ready) {
+ BUG_ON(priv->ready_last == NULL);
+
+ priv->ready_last->next = buffer;
+ } else
+ priv->ready = buffer;
+
+ priv->ready_last = buffer;
+
+ if (!priv->shared->hw_running)
+ run_ready(priv);
+
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return words * 4;
+}
+
+
+static long
+pxa3xx_gcu_misc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ unsigned long flags;
+ struct pxa3xx_gcu_priv *priv =
+ container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+ switch (cmd) {
+ case PXA3XX_GCU_IOCTL_RESET:
+ spin_lock_irqsave(&priv->spinlock, flags);
+ pxa3xx_gcu_reset(priv);
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+ return 0;
+
+ case PXA3XX_GCU_IOCTL_WAIT_IDLE:
+ return pxa3xx_gcu_wait_idle(priv);
+ }
+
+ return -ENOSYS;
+}
+
+static int
+pxa3xx_gcu_misc_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ unsigned int size = vma->vm_end - vma->vm_start;
+ struct pxa3xx_gcu_priv *priv =
+ container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+ switch (vma->vm_pgoff) {
+ case 0:
+ /* hand out the shared data area */
+ if (size != SHARED_SIZE)
+ return -EINVAL;
+
+ return dma_mmap_coherent(NULL, vma,
+ priv->shared, priv->shared_phys, size);
+
+ case SHARED_SIZE >> PAGE_SHIFT:
+ /* hand out the MMIO base for direct register access
+ * from userspace */
+ if (size != resource_size(priv->resource_mem))
+ return -EINVAL;
+
+ vma->vm_flags |= VM_IO;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ return io_remap_pfn_range(vma, vma->vm_start,
+ priv->resource_mem->start >> PAGE_SHIFT,
+ size, vma->vm_page_prot);
+ }
+
+ return -EINVAL;
+}
+
+
+#ifdef PXA3XX_GCU_DEBUG_TIMER
+static struct timer_list pxa3xx_gcu_debug_timer;
+
+static void pxa3xx_gcu_debug_timedout(unsigned long ptr)
+{
+ struct pxa3xx_gcu_priv *priv = (struct pxa3xx_gcu_priv *) ptr;
+
+ QERROR("Timer DUMP");
+
+ /* init the timer structure */
+ init_timer(&pxa3xx_gcu_debug_timer);
+ pxa3xx_gcu_debug_timer.function = pxa3xx_gcu_debug_timedout;
+ pxa3xx_gcu_debug_timer.data = ptr;
+ pxa3xx_gcu_debug_timer.expires = jiffies + 5*HZ; /* one second */
+
+ add_timer(&pxa3xx_gcu_debug_timer);
+}
+
+static void pxa3xx_gcu_init_debug_timer(void)
+{
+ pxa3xx_gcu_debug_timedout((unsigned long) &pxa3xx_gcu_debug_timer);
+}
+#else
+static inline void pxa3xx_gcu_init_debug_timer(void) {}
+#endif
+
+static int
+add_buffer(struct platform_device *dev,
+ struct pxa3xx_gcu_priv *priv)
+{
+ struct pxa3xx_gcu_batch *buffer;
+
+ buffer = kzalloc(sizeof(struct pxa3xx_gcu_batch), GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ buffer->ptr = dma_alloc_coherent(&dev->dev, PXA3XX_GCU_BATCH_WORDS * 4,
+ &buffer->phys, GFP_KERNEL);
+ if (!buffer->ptr) {
+ kfree(buffer);
+ return -ENOMEM;
+ }
+
+ buffer->next = priv->free;
+
+ priv->free = buffer;
+
+ return 0;
+}
+
+static void
+free_buffers(struct platform_device *dev,
+ struct pxa3xx_gcu_priv *priv)
+{
+ struct pxa3xx_gcu_batch *next, *buffer = priv->free;
+
+ while (buffer) {
+ next = buffer->next;
+
+ dma_free_coherent(&dev->dev, PXA3XX_GCU_BATCH_WORDS * 4,
+ buffer->ptr, buffer->phys);
+
+ kfree(buffer);
+
+ buffer = next;
+ }
+
+ priv->free = NULL;
+}
+
+static int __devinit
+pxa3xx_gcu_probe(struct platform_device *dev)
+{
+ int i, ret, irq;
+ struct resource *r;
+ struct pxa3xx_gcu_priv *priv;
+
+ priv = kzalloc(sizeof(struct pxa3xx_gcu_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ for (i = 0; i < 8; i++) {
+ ret = add_buffer(dev, priv);
+ if (ret) {
+ dev_err(&dev->dev, "failed to allocate DMA memory\n");
+ goto err_free_priv;
+ }
+ }
+
+ init_waitqueue_head(&priv->wait_idle);
+ init_waitqueue_head(&priv->wait_free);
+ spin_lock_init(&priv->spinlock);
+
+ /* we allocate the misc device structure as part of our own allocation,
+ * so we can get a pointer to our priv structure later on with
+ * container_of(). This isn't really necessary as we have a fixed minor
+ * number anyway, but this is to avoid statics. */
+
+ priv->misc_fops.owner = THIS_MODULE;
+ priv->misc_fops.write = pxa3xx_gcu_misc_write;
+ priv->misc_fops.unlocked_ioctl = pxa3xx_gcu_misc_ioctl;
+ priv->misc_fops.mmap = pxa3xx_gcu_misc_mmap;
+
+ priv->misc_dev.minor = MISCDEV_MINOR,
+ priv->misc_dev.name = DRV_NAME,
+ priv->misc_dev.fops = &priv->misc_fops,
+
+ /* register misc device */
+ ret = misc_register(&priv->misc_dev);
+ if (ret < 0) {
+ dev_err(&dev->dev, "misc_register() for minor %d failed\n",
+ MISCDEV_MINOR);
+ goto err_free_priv;
+ }
+
+ /* handle IO resources */
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&dev->dev, "no I/O memory resource defined\n");
+ ret = -ENODEV;
+ goto err_misc_deregister;
+ }
+
+ if (!request_mem_region(r->start, resource_size(r), dev->name)) {
+ dev_err(&dev->dev, "failed to request I/O memory\n");
+ ret = -EBUSY;
+ goto err_misc_deregister;
+ }
+
+ priv->mmio_base = ioremap_nocache(r->start, resource_size(r));
+ if (!priv->mmio_base) {
+ dev_err(&dev->dev, "failed to map I/O memory\n");
+ ret = -EBUSY;
+ goto err_free_mem_region;
+ }
+
+ /* allocate dma memory */
+ priv->shared = dma_alloc_coherent(&dev->dev, SHARED_SIZE,
+ &priv->shared_phys, GFP_KERNEL);
+
+ if (!priv->shared) {
+ dev_err(&dev->dev, "failed to allocate DMA memory\n");
+ ret = -ENOMEM;
+ goto err_free_io;
+ }
+
+ /* enable the clock */
+ priv->clk = clk_get(&dev->dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&dev->dev, "failed to get clock\n");
+ ret = -ENODEV;
+ goto err_free_dma;
+ }
+
+ ret = clk_enable(priv->clk);
+ if (ret < 0) {
+ dev_err(&dev->dev, "failed to enable clock\n");
+ goto err_put_clk;
+ }
+
+ /* request the IRQ */
+ irq = platform_get_irq(dev, 0);
+ if (irq < 0) {
+ dev_err(&dev->dev, "no IRQ defined\n");
+ ret = -ENODEV;
+ goto err_put_clk;
+ }
+
+ ret = request_irq(irq, pxa3xx_gcu_handle_irq,
+ IRQF_DISABLED, DRV_NAME, priv);
+ if (ret) {
+ dev_err(&dev->dev, "request_irq failed\n");
+ ret = -EBUSY;
+ goto err_put_clk;
+ }
+
+ platform_set_drvdata(dev, priv);
+ priv->resource_mem = r;
+ pxa3xx_gcu_reset(priv);
+ pxa3xx_gcu_init_debug_timer();
+
+ dev_info(&dev->dev, "registered @0x%p, DMA 0x%p (%d bytes), IRQ %d\n",
+ (void *) r->start, (void *) priv->shared_phys,
+ SHARED_SIZE, irq);
+ return 0;
+
+err_put_clk:
+ clk_disable(priv->clk);
+ clk_put(priv->clk);
+
+err_free_dma:
+ dma_free_coherent(&dev->dev, SHARED_SIZE,
+ priv->shared, priv->shared_phys);
+
+err_free_io:
+ iounmap(priv->mmio_base);
+
+err_free_mem_region:
+ release_mem_region(r->start, resource_size(r));
+
+err_misc_deregister:
+ misc_deregister(&priv->misc_dev);
+
+err_free_priv:
+ platform_set_drvdata(dev, NULL);
+ free_buffers(dev, priv);
+ kfree(priv);
+ return ret;
+}
+
+static int __devexit
+pxa3xx_gcu_remove(struct platform_device *dev)
+{
+ struct pxa3xx_gcu_priv *priv = platform_get_drvdata(dev);
+ struct resource *r = priv->resource_mem;
+
+ pxa3xx_gcu_wait_idle(priv);
+
+ misc_deregister(&priv->misc_dev);
+ dma_free_coherent(&dev->dev, SHARED_SIZE,
+ priv->shared, priv->shared_phys);
+ iounmap(priv->mmio_base);
+ release_mem_region(r->start, resource_size(r));
+ platform_set_drvdata(dev, NULL);
+ clk_disable(priv->clk);
+ free_buffers(dev, priv);
+ kfree(priv);
+
+ return 0;
+}
+
+static struct platform_driver pxa3xx_gcu_driver = {
+ .probe = pxa3xx_gcu_probe,
+ .remove = __devexit_p(pxa3xx_gcu_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+
+static int __init
+pxa3xx_gcu_init(void)
+{
+ return platform_driver_register(&pxa3xx_gcu_driver);
+}
+
+static void __exit
+pxa3xx_gcu_exit(void)
+{
+ platform_driver_unregister(&pxa3xx_gcu_driver);
+}
+
+module_init(pxa3xx_gcu_init);
+module_exit(pxa3xx_gcu_exit);
+
+MODULE_DESCRIPTION("PXA3xx graphics controller unit driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(MISCDEV_MINOR);
+MODULE_AUTHOR("Janine Kropp <nin@directfb.org>, "
+ "Denis Oliver Kropp <dok@directfb.org>, "
+ "Daniel Mack <daniel@caiaq.de>");
diff --git a/drivers/video/pxa3xx-gcu.h b/drivers/video/pxa3xx-gcu.h
new file mode 100644
index 0000000..0428ed0
--- /dev/null
+++ b/drivers/video/pxa3xx-gcu.h
@@ -0,0 +1,38 @@
+#ifndef __PXA3XX_GCU_H__
+#define __PXA3XX_GCU_H__
+
+#include <linux/types.h>
+
+/* Number of 32bit words in display list (ring buffer). */
+#define PXA3XX_GCU_BUFFER_WORDS ((256 * 1024 - 256) / 4)
+
+/* To be increased when breaking the ABI */
+#define PXA3XX_GCU_SHARED_MAGIC 0x30000001
+
+#define PXA3XX_GCU_BATCH_WORDS 8192
+
+struct pxa3xx_gcu_shared {
+ u32 buffer[PXA3XX_GCU_BUFFER_WORDS];
+
+ bool hw_running;
+
+ unsigned long buffer_phys;
+
+ unsigned int num_words;
+ unsigned int num_writes;
+ unsigned int num_done;
+ unsigned int num_interrupts;
+ unsigned int num_wait_idle;
+ unsigned int num_wait_free;
+ unsigned int num_idle;
+
+ u32 magic;
+};
+
+/* Initialization and synchronization.
+ * Hardware is started upon write(). */
+#define PXA3XX_GCU_IOCTL_RESET _IO('G', 0)
+#define PXA3XX_GCU_IOCTL_WAIT_IDLE _IO('G', 2)
+
+#endif /* __PXA3XX_GCU_H__ */
+
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 2ee7dac..86f7cac 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -270,7 +270,7 @@
return -ENOMEM;
}
- imx2_wdt.clk = clk_get_sys("imx-wdt.0", NULL);
+ imx2_wdt.clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(imx2_wdt.clk)) {
dev_err(&pdev->dev, "can't get Watchdog clock\n");
return PTR_ERR(imx2_wdt.clk);
diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h
deleted file mode 100644
index eff3094..0000000
--- a/include/linux/mfd/tc35892.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- */
-
-#ifndef __LINUX_MFD_TC35892_H
-#define __LINUX_MFD_TC35892_H
-
-#include <linux/device.h>
-
-#define TC35892_RSTCTRL_IRQRST (1 << 4)
-#define TC35892_RSTCTRL_TIMRST (1 << 3)
-#define TC35892_RSTCTRL_ROTRST (1 << 2)
-#define TC35892_RSTCTRL_KBDRST (1 << 1)
-#define TC35892_RSTCTRL_GPIRST (1 << 0)
-
-#define TC35892_IRQST 0x91
-
-#define TC35892_MANFCODE_MAGIC 0x03
-#define TC35892_MANFCODE 0x80
-#define TC35892_VERSION 0x81
-#define TC35892_IOCFG 0xA7
-
-#define TC35892_CLKMODE 0x88
-#define TC35892_CLKCFG 0x89
-#define TC35892_CLKEN 0x8A
-
-#define TC35892_RSTCTRL 0x82
-#define TC35892_EXTRSTN 0x83
-#define TC35892_RSTINTCLR 0x84
-
-#define TC35892_GPIOIS0 0xC9
-#define TC35892_GPIOIS1 0xCA
-#define TC35892_GPIOIS2 0xCB
-#define TC35892_GPIOIBE0 0xCC
-#define TC35892_GPIOIBE1 0xCD
-#define TC35892_GPIOIBE2 0xCE
-#define TC35892_GPIOIEV0 0xCF
-#define TC35892_GPIOIEV1 0xD0
-#define TC35892_GPIOIEV2 0xD1
-#define TC35892_GPIOIE0 0xD2
-#define TC35892_GPIOIE1 0xD3
-#define TC35892_GPIOIE2 0xD4
-#define TC35892_GPIORIS0 0xD6
-#define TC35892_GPIORIS1 0xD7
-#define TC35892_GPIORIS2 0xD8
-#define TC35892_GPIOMIS0 0xD9
-#define TC35892_GPIOMIS1 0xDA
-#define TC35892_GPIOMIS2 0xDB
-#define TC35892_GPIOIC0 0xDC
-#define TC35892_GPIOIC1 0xDD
-#define TC35892_GPIOIC2 0xDE
-
-#define TC35892_GPIODATA0 0xC0
-#define TC35892_GPIOMASK0 0xc1
-#define TC35892_GPIODATA1 0xC2
-#define TC35892_GPIOMASK1 0xc3
-#define TC35892_GPIODATA2 0xC4
-#define TC35892_GPIOMASK2 0xC5
-
-#define TC35892_GPIODIR0 0xC6
-#define TC35892_GPIODIR1 0xC7
-#define TC35892_GPIODIR2 0xC8
-
-#define TC35892_GPIOSYNC0 0xE6
-#define TC35892_GPIOSYNC1 0xE7
-#define TC35892_GPIOSYNC2 0xE8
-
-#define TC35892_GPIOWAKE0 0xE9
-#define TC35892_GPIOWAKE1 0xEA
-#define TC35892_GPIOWAKE2 0xEB
-
-#define TC35892_GPIOODM0 0xE0
-#define TC35892_GPIOODE0 0xE1
-#define TC35892_GPIOODM1 0xE2
-#define TC35892_GPIOODE1 0xE3
-#define TC35892_GPIOODM2 0xE4
-#define TC35892_GPIOODE2 0xE5
-
-#define TC35892_INT_GPIIRQ 0
-#define TC35892_INT_TI0IRQ 1
-#define TC35892_INT_TI1IRQ 2
-#define TC35892_INT_TI2IRQ 3
-#define TC35892_INT_ROTIRQ 5
-#define TC35892_INT_KBDIRQ 6
-#define TC35892_INT_PORIRQ 7
-
-#define TC35892_NR_INTERNAL_IRQS 8
-#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x))
-
-struct tc35892 {
- struct mutex lock;
- struct device *dev;
- struct i2c_client *i2c;
-
- int irq_base;
- int num_gpio;
- struct tc35892_platform_data *pdata;
-};
-
-extern int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data);
-extern int tc35892_reg_read(struct tc35892 *tc35892, u8 reg);
-extern int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length,
- u8 *values);
-extern int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length,
- const u8 *values);
-extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val);
-
-/**
- * struct tc35892_gpio_platform_data - TC35892 GPIO platform data
- * @gpio_base: first gpio number assigned to TC35892. A maximum of
- * %TC35892_NR_GPIOS GPIOs will be allocated.
- * @setup: callback for board-specific initialization
- * @remove: callback for board-specific teardown
- */
-struct tc35892_gpio_platform_data {
- int gpio_base;
- void (*setup)(struct tc35892 *tc35892, unsigned gpio_base);
- void (*remove)(struct tc35892 *tc35892, unsigned gpio_base);
-};
-
-/**
- * struct tc35892_platform_data - TC35892 platform data
- * @irq_base: base IRQ number. %TC35892_NR_IRQS irqs will be used.
- * @gpio: GPIO-specific platform data
- */
-struct tc35892_platform_data {
- int irq_base;
- struct tc35892_gpio_platform_data *gpio;
-};
-
-#define TC35892_NR_GPIOS 24
-#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS)
-
-#endif
diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
new file mode 100644
index 0000000..16c76e1
--- /dev/null
+++ b/include/linux/mfd/tc3589x.h
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ */
+
+#ifndef __LINUX_MFD_TC3589x_H
+#define __LINUX_MFD_TC3589x_H
+
+#include <linux/device.h>
+
+enum tx3589x_block {
+ TC3589x_BLOCK_GPIO = 1 << 0,
+ TC3589x_BLOCK_KEYPAD = 1 << 1,
+};
+
+#define TC3589x_RSTCTRL_IRQRST (1 << 4)
+#define TC3589x_RSTCTRL_TIMRST (1 << 3)
+#define TC3589x_RSTCTRL_ROTRST (1 << 2)
+#define TC3589x_RSTCTRL_KBDRST (1 << 1)
+#define TC3589x_RSTCTRL_GPIRST (1 << 0)
+
+/* Keyboard Configuration Registers */
+#define TC3589x_KBDSETTLE_REG 0x01
+#define TC3589x_KBDBOUNCE 0x02
+#define TC3589x_KBDSIZE 0x03
+#define TC3589x_KBCFG_LSB 0x04
+#define TC3589x_KBCFG_MSB 0x05
+#define TC3589x_KBDIC 0x08
+#define TC3589x_KBDMSK 0x09
+#define TC3589x_EVTCODE_FIFO 0x10
+#define TC3589x_KBDMFS 0x8F
+
+#define TC3589x_IRQST 0x91
+
+#define TC3589x_MANFCODE_MAGIC 0x03
+#define TC3589x_MANFCODE 0x80
+#define TC3589x_VERSION 0x81
+#define TC3589x_IOCFG 0xA7
+
+#define TC3589x_CLKMODE 0x88
+#define TC3589x_CLKCFG 0x89
+#define TC3589x_CLKEN 0x8A
+
+#define TC3589x_RSTCTRL 0x82
+#define TC3589x_EXTRSTN 0x83
+#define TC3589x_RSTINTCLR 0x84
+
+/* Pull up/down configuration registers */
+#define TC3589x_IOCFG 0xA7
+#define TC3589x_IOPULLCFG0_LSB 0xAA
+#define TC3589x_IOPULLCFG0_MSB 0xAB
+#define TC3589x_IOPULLCFG1_LSB 0xAC
+#define TC3589x_IOPULLCFG1_MSB 0xAD
+#define TC3589x_IOPULLCFG2_LSB 0xAE
+
+#define TC3589x_GPIOIS0 0xC9
+#define TC3589x_GPIOIS1 0xCA
+#define TC3589x_GPIOIS2 0xCB
+#define TC3589x_GPIOIBE0 0xCC
+#define TC3589x_GPIOIBE1 0xCD
+#define TC3589x_GPIOIBE2 0xCE
+#define TC3589x_GPIOIEV0 0xCF
+#define TC3589x_GPIOIEV1 0xD0
+#define TC3589x_GPIOIEV2 0xD1
+#define TC3589x_GPIOIE0 0xD2
+#define TC3589x_GPIOIE1 0xD3
+#define TC3589x_GPIOIE2 0xD4
+#define TC3589x_GPIORIS0 0xD6
+#define TC3589x_GPIORIS1 0xD7
+#define TC3589x_GPIORIS2 0xD8
+#define TC3589x_GPIOMIS0 0xD9
+#define TC3589x_GPIOMIS1 0xDA
+#define TC3589x_GPIOMIS2 0xDB
+#define TC3589x_GPIOIC0 0xDC
+#define TC3589x_GPIOIC1 0xDD
+#define TC3589x_GPIOIC2 0xDE
+
+#define TC3589x_GPIODATA0 0xC0
+#define TC3589x_GPIOMASK0 0xc1
+#define TC3589x_GPIODATA1 0xC2
+#define TC3589x_GPIOMASK1 0xc3
+#define TC3589x_GPIODATA2 0xC4
+#define TC3589x_GPIOMASK2 0xC5
+
+#define TC3589x_GPIODIR0 0xC6
+#define TC3589x_GPIODIR1 0xC7
+#define TC3589x_GPIODIR2 0xC8
+
+#define TC3589x_GPIOSYNC0 0xE6
+#define TC3589x_GPIOSYNC1 0xE7
+#define TC3589x_GPIOSYNC2 0xE8
+
+#define TC3589x_GPIOWAKE0 0xE9
+#define TC3589x_GPIOWAKE1 0xEA
+#define TC3589x_GPIOWAKE2 0xEB
+
+#define TC3589x_GPIOODM0 0xE0
+#define TC3589x_GPIOODE0 0xE1
+#define TC3589x_GPIOODM1 0xE2
+#define TC3589x_GPIOODE1 0xE3
+#define TC3589x_GPIOODM2 0xE4
+#define TC3589x_GPIOODE2 0xE5
+
+#define TC3589x_INT_GPIIRQ 0
+#define TC3589x_INT_TI0IRQ 1
+#define TC3589x_INT_TI1IRQ 2
+#define TC3589x_INT_TI2IRQ 3
+#define TC3589x_INT_ROTIRQ 5
+#define TC3589x_INT_KBDIRQ 6
+#define TC3589x_INT_PORIRQ 7
+
+#define TC3589x_NR_INTERNAL_IRQS 8
+#define TC3589x_INT_GPIO(x) (TC3589x_NR_INTERNAL_IRQS + (x))
+
+struct tc3589x {
+ struct mutex lock;
+ struct device *dev;
+ struct i2c_client *i2c;
+
+ int irq_base;
+ int num_gpio;
+ struct tc3589x_platform_data *pdata;
+};
+
+extern int tc3589x_reg_write(struct tc3589x *tc3589x, u8 reg, u8 data);
+extern int tc3589x_reg_read(struct tc3589x *tc3589x, u8 reg);
+extern int tc3589x_block_read(struct tc3589x *tc3589x, u8 reg, u8 length,
+ u8 *values);
+extern int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length,
+ const u8 *values);
+extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
+
+/*
+ * Keypad related platform specific constants
+ * These values may be modified for fine tuning
+ */
+#define TC_KPD_ROWS 0x8
+#define TC_KPD_COLUMNS 0x8
+#define TC_KPD_DEBOUNCE_PERIOD 0xA3
+#define TC_KPD_SETTLE_TIME 0xA3
+
+/**
+ * struct tc35893_platform_data - data structure for platform specific data
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow: mask for available rows, value is 0xFF
+ * @kcol: mask for available columns, value is 0xFF
+ * @debounce_period: platform specific debounce time
+ * @settle_time: platform specific settle down time
+ * @irqtype: type of interrupt, falling or rising edge
+ * @enable_wakeup: specifies if keypad event can wake up system from sleep
+ * @no_autorepeat: flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+ u8 krow;
+ u8 kcol;
+ u8 debounce_period;
+ u8 settle_time;
+ unsigned long irqtype;
+ bool enable_wakeup;
+ bool no_autorepeat;
+};
+
+/**
+ * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
+ * @gpio_base: first gpio number assigned to TC3589x. A maximum of
+ * %TC3589x_NR_GPIOS GPIOs will be allocated.
+ * @setup: callback for board-specific initialization
+ * @remove: callback for board-specific teardown
+ */
+struct tc3589x_gpio_platform_data {
+ int gpio_base;
+ void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base);
+ void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base);
+};
+
+/**
+ * struct tc3589x_platform_data - TC3589x platform data
+ * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
+ * @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used.
+ * @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
+ */
+struct tc3589x_platform_data {
+ unsigned int block;
+ int irq_base;
+ struct tc3589x_gpio_platform_data *gpio;
+ const struct tc3589x_keypad_platform_data *keypad;
+};
+
+#define TC3589x_NR_GPIOS 24
+#define TC3589x_NR_IRQS TC3589x_INT_GPIO(TC3589x_NR_GPIOS)
+
+#endif