net/mlx5: QPTS and QPDPM register firmware command support
The QPTS register allows changing the priority trust state between pcp and
dscp. Add support to get/set trust state from device. When the port is
in pcp/dscp trust state, packet is routed by hardware to matching priority
based on its pcp/dscp value respectively.
The QPDPM register allow channing the dscp to priority mapping. Add support
to get/set dscp to priority mapping from device.
Note that to change a dscp mapping, the "e" bit of this dscp structure
must be set in the QPDPM firmware command.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index ed5be52..a886b51 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -107,8 +107,10 @@ enum {
};
enum {
+ MLX5_REG_QPTS = 0x4002,
MLX5_REG_QETCR = 0x4005,
MLX5_REG_QTCT = 0x400a,
+ MLX5_REG_QPDPM = 0x4013,
MLX5_REG_QCAM = 0x4019,
MLX5_REG_DCBX_PARAM = 0x4020,
MLX5_REG_DCBX_APP = 0x4021,
@@ -142,6 +144,11 @@ enum {
MLX5_REG_MCAM = 0x907f,
};
+enum mlx5_qpts_trust_state {
+ MLX5_QPTS_TRUST_PCP = 1,
+ MLX5_QPTS_TRUST_DSCP = 2,
+};
+
enum mlx5_dcbx_oper_mode {
MLX5E_DCBX_PARAM_VER_OPER_HOST = 0x0,
MLX5E_DCBX_PARAM_VER_OPER_AUTO = 0x3,