mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence
According to UHS-I initialization sequence for SDIO 3.0 cards,
the host must set bit[24] (S18R) of OCR register during OCR
handshake to know whether the SDIO card is capable of doing
1.8V I/O.
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 34ad4c8..9565d38 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -157,10 +157,7 @@
if (ret)
goto out;
- if (card->host->caps &
- (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
- MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 |
- MMC_CAP_UHS_DDR50)) {
+ if (mmc_host_uhs(card->host)) {
if (data & SDIO_UHS_DDR50)
card->sw_caps.sd3_bus_mode
|= SD_MODE_UHS_DDR50;
@@ -478,8 +475,7 @@
* If the host doesn't support any of the UHS-I modes, fallback on
* default speed.
*/
- if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
- MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50)))
+ if (!mmc_host_uhs(card->host))
return 0;
bus_speed = SDIO_SPEED_SDR12;
@@ -645,11 +641,7 @@
* systems that claim 1.8v signalling in fact do not support
* it.
*/
- if ((ocr & R4_18V_PRESENT) &&
- (host->caps &
- (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
- MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 |
- MMC_CAP_UHS_DDR50))) {
+ if ((ocr & R4_18V_PRESENT) && mmc_host_uhs(host)) {
err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
true);
if (err) {
@@ -1022,6 +1014,10 @@
goto out;
}
+ if (mmc_host_uhs(host))
+ /* to query card if 1.8V signalling is supported */
+ host->ocr |= R4_18V_PRESENT;
+
ret = mmc_sdio_init_card(host, host->ocr, host->card,
mmc_card_keep_power(host));
if (!ret && host->sdio_irqs)
@@ -1087,6 +1083,10 @@
/*
* Detect and init the card.
*/
+ if (mmc_host_uhs(host))
+ /* to query card if 1.8V signalling is supported */
+ host->ocr |= R4_18V_PRESENT;
+
err = mmc_sdio_init_card(host, host->ocr, NULL, 0);
if (err) {
if (err == -EAGAIN) {