| /* |
| * NetChip 2280 high/full speed USB device controller. |
| * Unlike many such controllers, this one talks PCI. |
| */ |
| |
| /* |
| * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) |
| * Copyright (C) 2003 David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/usb/net2280.h> |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #ifdef __KERNEL__ |
| |
| /* indexed registers [11.10] are accessed indirectly |
| * caller must own the device lock. |
| */ |
| |
| static inline u32 |
| get_idx_reg (struct net2280_regs __iomem *regs, u32 index) |
| { |
| writel (index, ®s->idxaddr); |
| /* NOTE: synchs device/cpu memory views */ |
| return readl (®s->idxdata); |
| } |
| |
| static inline void |
| set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value) |
| { |
| writel (index, ®s->idxaddr); |
| writel (value, ®s->idxdata); |
| /* posted, may not be visible yet */ |
| } |
| |
| #endif /* __KERNEL__ */ |
| |
| |
| #define REG_DIAG 0x0 |
| #define RETRY_COUNTER 16 |
| #define FORCE_PCI_SERR 11 |
| #define FORCE_PCI_INTERRUPT 10 |
| #define FORCE_USB_INTERRUPT 9 |
| #define FORCE_CPU_INTERRUPT 8 |
| #define ILLEGAL_BYTE_ENABLES 5 |
| #define FAST_TIMES 4 |
| #define FORCE_RECEIVE_ERROR 2 |
| #define FORCE_TRANSMIT_CRC_ERROR 0 |
| #define REG_FRAME 0x02 /* from last sof */ |
| #define REG_CHIPREV 0x03 /* in bcd */ |
| #define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */ |
| |
| #define CHIPREV_1 0x0100 |
| #define CHIPREV_1A 0x0110 |
| |
| #ifdef __KERNEL__ |
| |
| /* ep a-f highspeed and fullspeed maxpacket, addresses |
| * computed from ep->num |
| */ |
| #define REG_EP_MAXPKT(dev,num) (((num) + 1) * 0x10 + \ |
| (((dev)->gadget.speed == USB_SPEED_HIGH) ? 0 : 1)) |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* [8.3] for scatter/gather i/o |
| * use struct net2280_dma_regs bitfields |
| */ |
| struct net2280_dma { |
| __le32 dmacount; |
| __le32 dmaaddr; /* the buffer */ |
| __le32 dmadesc; /* next dma descriptor */ |
| __le32 _reserved; |
| } __attribute__ ((aligned (16))); |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* DRIVER DATA STRUCTURES and UTILITIES */ |
| |
| struct net2280_ep { |
| struct usb_ep ep; |
| struct net2280_ep_regs __iomem *regs; |
| struct net2280_dma_regs __iomem *dma; |
| struct net2280_dma *dummy; |
| dma_addr_t td_dma; /* of dummy */ |
| struct net2280 *dev; |
| unsigned long irqs; |
| |
| /* analogous to a host-side qh */ |
| struct list_head queue; |
| const struct usb_endpoint_descriptor *desc; |
| unsigned num : 8, |
| fifo_size : 12, |
| in_fifo_validate : 1, |
| out_overflow : 1, |
| stopped : 1, |
| is_in : 1, |
| is_iso : 1, |
| responded : 1; |
| }; |
| |
| static inline void allow_status (struct net2280_ep *ep) |
| { |
| /* ep0 only */ |
| writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
| | (1 << CLEAR_NAK_OUT_PACKETS) |
| | (1 << CLEAR_NAK_OUT_PACKETS_MODE) |
| , &ep->regs->ep_rsp); |
| ep->stopped = 1; |
| } |
| |
| /* count (<= 4) bytes in the next fifo write will be valid */ |
| static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count) |
| { |
| writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); |
| } |
| |
| struct net2280_request { |
| struct usb_request req; |
| struct net2280_dma *td; |
| dma_addr_t td_dma; |
| struct list_head queue; |
| unsigned mapped : 1, |
| valid : 1; |
| }; |
| |
| struct net2280 { |
| /* each pci device provides one gadget, several endpoints */ |
| struct usb_gadget gadget; |
| spinlock_t lock; |
| struct net2280_ep ep [7]; |
| struct usb_gadget_driver *driver; |
| unsigned enabled : 1, |
| protocol_stall : 1, |
| softconnect : 1, |
| got_irq : 1, |
| region : 1; |
| u16 chiprev; |
| |
| /* pci state used to access those endpoints */ |
| struct pci_dev *pdev; |
| struct net2280_regs __iomem *regs; |
| struct net2280_usb_regs __iomem *usb; |
| struct net2280_pci_regs __iomem *pci; |
| struct net2280_dma_regs __iomem *dma; |
| struct net2280_dep_regs __iomem *dep; |
| struct net2280_ep_regs __iomem *epregs; |
| |
| struct pci_pool *requests; |
| // statistics... |
| }; |
| |
| static inline void set_halt (struct net2280_ep *ep) |
| { |
| /* ep0 and bulk/intr endpoints */ |
| writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
| /* set NAK_OUT for erratum 0114 */ |
| | ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) |
| | (1 << SET_ENDPOINT_HALT) |
| , &ep->regs->ep_rsp); |
| } |
| |
| static inline void clear_halt (struct net2280_ep *ep) |
| { |
| /* ep0 and bulk/intr endpoints */ |
| writel ( (1 << CLEAR_ENDPOINT_HALT) |
| | (1 << CLEAR_ENDPOINT_TOGGLE) |
| /* unless the gadget driver left a short packet in the |
| * fifo, this reverses the erratum 0114 workaround. |
| */ |
| | ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS) |
| , &ep->regs->ep_rsp); |
| } |
| |
| #ifdef USE_RDK_LEDS |
| |
| static inline void net2280_led_init (struct net2280 *dev) |
| { |
| /* LED3 (green) is on during USB activity. note erratum 0113. */ |
| writel ((1 << GPIO3_LED_SELECT) |
| | (1 << GPIO3_OUTPUT_ENABLE) |
| | (1 << GPIO2_OUTPUT_ENABLE) |
| | (1 << GPIO1_OUTPUT_ENABLE) |
| | (1 << GPIO0_OUTPUT_ENABLE) |
| , &dev->regs->gpioctl); |
| } |
| |
| /* indicate speed with bi-color LED 0/1 */ |
| static inline |
| void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed) |
| { |
| u32 val = readl (&dev->regs->gpioctl); |
| switch (speed) { |
| case USB_SPEED_HIGH: /* green */ |
| val &= ~(1 << GPIO0_DATA); |
| val |= (1 << GPIO1_DATA); |
| break; |
| case USB_SPEED_FULL: /* red */ |
| val &= ~(1 << GPIO1_DATA); |
| val |= (1 << GPIO0_DATA); |
| break; |
| default: /* (off/black) */ |
| val &= ~((1 << GPIO1_DATA) | (1 << GPIO0_DATA)); |
| break; |
| } |
| writel (val, &dev->regs->gpioctl); |
| } |
| |
| /* indicate power with LED 2 */ |
| static inline void net2280_led_active (struct net2280 *dev, int is_active) |
| { |
| u32 val = readl (&dev->regs->gpioctl); |
| |
| // FIXME this LED never seems to turn on. |
| if (is_active) |
| val |= GPIO2_DATA; |
| else |
| val &= ~GPIO2_DATA; |
| writel (val, &dev->regs->gpioctl); |
| } |
| static inline void net2280_led_shutdown (struct net2280 *dev) |
| { |
| /* turn off all four GPIO*_DATA bits */ |
| writel (readl (&dev->regs->gpioctl) & ~0x0f, |
| &dev->regs->gpioctl); |
| } |
| |
| #else |
| |
| #define net2280_led_init(dev) do { } while (0) |
| #define net2280_led_speed(dev, speed) do { } while (0) |
| #define net2280_led_shutdown(dev) do { } while (0) |
| |
| #endif |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #define xprintk(dev,level,fmt,args...) \ |
| printk(level "%s %s: " fmt , driver_name , \ |
| pci_name(dev->pdev) , ## args) |
| |
| #ifdef DEBUG |
| #undef DEBUG |
| #define DEBUG(dev,fmt,args...) \ |
| xprintk(dev , KERN_DEBUG , fmt , ## args) |
| #else |
| #define DEBUG(dev,fmt,args...) \ |
| do { } while (0) |
| #endif /* DEBUG */ |
| |
| #ifdef VERBOSE |
| #define VDEBUG DEBUG |
| #else |
| #define VDEBUG(dev,fmt,args...) \ |
| do { } while (0) |
| #endif /* VERBOSE */ |
| |
| #define ERROR(dev,fmt,args...) \ |
| xprintk(dev , KERN_ERR , fmt , ## args) |
| #define WARN(dev,fmt,args...) \ |
| xprintk(dev , KERN_WARNING , fmt , ## args) |
| #define INFO(dev,fmt,args...) \ |
| xprintk(dev , KERN_INFO , fmt , ## args) |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline void start_out_naking (struct net2280_ep *ep) |
| { |
| /* NOTE: hardware races lurk here, and PING protocol issues */ |
| writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); |
| /* synch with device */ |
| readl (&ep->regs->ep_rsp); |
| } |
| |
| #ifdef DEBUG |
| static inline void assert_out_naking (struct net2280_ep *ep, const char *where) |
| { |
| u32 tmp = readl (&ep->regs->ep_stat); |
| |
| if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { |
| DEBUG (ep->dev, "%s %s %08x !NAK\n", |
| ep->ep.name, where, tmp); |
| writel ((1 << SET_NAK_OUT_PACKETS), |
| &ep->regs->ep_rsp); |
| } |
| } |
| #define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__FUNCTION__) |
| #else |
| #define ASSERT_OUT_NAKING(ep) do {} while (0) |
| #endif |
| |
| static inline void stop_out_naking (struct net2280_ep *ep) |
| { |
| u32 tmp; |
| |
| tmp = readl (&ep->regs->ep_stat); |
| if ((tmp & (1 << NAK_OUT_PACKETS)) != 0) |
| writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); |
| } |
| |
| #endif /* __KERNEL__ */ |