V4L/DVB (3753): Whitespace cleanups at media/radio
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 3fff757..de3128a 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -136,7 +136,7 @@
Choose Y here if you have this PCI FM radio card.
In order to control your radio card, you will need to use programs
- that are compatible with the Video for Linux API. Information on
+ that are compatible with the Video for Linux API. Information on
this API and pointers to "v4l" programs may be found at
<file:Documentation/video4linux/API.html>.
diff --git a/drivers/media/radio/miropcm20-radio.c b/drivers/media/radio/miropcm20-radio.c
index dc292da..ba1f0c1 100644
--- a/drivers/media/radio/miropcm20-radio.c
+++ b/drivers/media/radio/miropcm20-radio.c
@@ -16,7 +16,7 @@
/* What ever you think about the ACI, version 0x07 is not very well!
* I can't get frequency, 'tuner status', 'tuner flags' or mute/mono
- * conditions... Robert
+ * conditions... Robert
*/
#include <linux/module.h>
@@ -123,7 +123,7 @@
struct video_device *dev = video_devdata(file);
struct pcm20_device *pcm20 = dev->priv;
int i;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -139,7 +139,7 @@
case VIDIOCGTUNER:
{
struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
+ if(v->tuner) /* Only 1 tuner */
return -EINVAL;
v->rangelow=87*16000;
v->rangehigh=108*16000;
@@ -172,7 +172,7 @@
return i;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0, sizeof(*v));
v->flags=VIDEO_AUDIO_MUTABLE;
@@ -183,12 +183,12 @@
v->mode|=VIDEO_SOUND_MONO;
/* v->step=2048; */
strcpy(v->name, "Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *v = arg;
- if(v->audio)
+ if(v->audio)
return -EINVAL;
pcm20_mute(pcm20, !!(v->flags&VIDEO_AUDIO_MUTE));
@@ -237,7 +237,7 @@
{
if(video_register_device(&pcm20_radio, VFL_TYPE_RADIO, radio_nr)==-1)
goto video_register_device;
-
+
if(attach_aci_rds()<0)
goto attach_aci_rds;
diff --git a/drivers/media/radio/miropcm20-rds-core.c b/drivers/media/radio/miropcm20-rds-core.c
index b602c73..dfb8252 100644
--- a/drivers/media/radio/miropcm20-rds-core.c
+++ b/drivers/media/radio/miropcm20-rds-core.c
@@ -33,24 +33,24 @@
#define RDS_BUSYMASK 0x10 /* Bit 4 */
#define RDS_CLOCKMASK 0x08 /* Bit 3 */
-#define RDS_DATA(x) (((x) >> RDS_DATASHIFT) & 1)
+#define RDS_DATA(x) (((x) >> RDS_DATASHIFT) & 1)
#if DEBUG
static void print_matrix(char array[], unsigned int length)
{
- int i, j;
+ int i, j;
- for (i=0; i<length; i++) {
- printk(KERN_DEBUG "aci-rds: ");
- for (j=7; j>=0; j--) {
- printk("%d", (array[i] >> j) & 0x1);
- }
- if (i%8 == 0)
- printk(" byte-border\n");
- else
- printk("\n");
- }
+ for (i=0; i<length; i++) {
+ printk(KERN_DEBUG "aci-rds: ");
+ for (j=7; j>=0; j--) {
+ printk("%d", (array[i] >> j) & 0x1);
+ }
+ if (i%8 == 0)
+ printk(" byte-border\n");
+ else
+ printk("\n");
+ }
}
#endif /* DEBUG */
@@ -114,7 +114,7 @@
{
unsigned char sendbuffer[8];
int i;
-
+
if (byte2trans(cmd, sendbuffer, 8) != 0){
return -1;
} else {
@@ -151,7 +151,7 @@
I have to waitread() here */
if (rds_waitread() < 0)
return -1;
-
+
memset(databuffer, 0, datasize);
for (i=0; i< READSIZE; i++)
@@ -194,7 +194,7 @@
ret = 0;
mutex_unlock(&aci_rds_mutex);
-
+
return ret;
}
EXPORT_SYMBOL(aci_rds_cmd);
diff --git a/drivers/media/radio/miropcm20-rds.c b/drivers/media/radio/miropcm20-rds.c
index e092140..87b37b7 100644
--- a/drivers/media/radio/miropcm20-rds.c
+++ b/drivers/media/radio/miropcm20-rds.c
@@ -48,7 +48,7 @@
static void print_matrix(char *ch, char out[])
{
- int j;
+ int j;
for (j=7; j>=0; j--) {
out[7-j] = ((*ch >> j) & 0x1) + '0';
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 557fb5c..36119d7 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -24,7 +24,7 @@
* out(port, start_increasing_volume);
* wait(a_wee_while);
* out(port, stop_changing_the_volume);
- *
+ *
*/
#include <linux/module.h> /* Modules */
@@ -41,7 +41,7 @@
#define CONFIG_RADIO_RTRACK_PORT -1
#endif
-static int io = CONFIG_RADIO_RTRACK_PORT;
+static int io = CONFIG_RADIO_RTRACK_PORT;
static int radio_nr = -1;
static struct mutex lock;
@@ -93,12 +93,12 @@
int i;
mutex_lock(&lock);
-
+
if(vol == dev->curvol) { /* requested volume = current */
if (dev->muted) { /* user is unmuting the card */
dev->muted = 0;
outb (0xd8, io); /* enable card */
- }
+ }
mutex_unlock(&lock);
return 0;
}
@@ -114,10 +114,10 @@
dev->muted = 0;
if(vol > dev->curvol)
- for(i = dev->curvol; i < vol; i++)
+ for(i = dev->curvol; i < vol; i++)
rt_incvol();
else
- for(i = dev->curvol; i > vol; i--)
+ for(i = dev->curvol; i > vol; i--)
rt_decvol();
dev->curvol = vol;
@@ -125,7 +125,7 @@
return 0;
}
-/* the 128+64 on these outb's is to keep the volume stable while tuning
+/* the 128+64 on these outb's is to keep the volume stable while tuning
* without them, the volume _will_ creep up with each frequency change
* and bit 4 (+16) is to keep the signal strength meter enabled
*/
@@ -140,7 +140,7 @@
outb_p(128+64+16+8+ 1, port); /* on + wr-enable + data low */
outb_p(128+64+16+8+2+1, port); /* clock */
}
- sleep_delay(1000);
+ sleep_delay(1000);
}
static void send_1_byte(int port, struct rt_device *dev)
@@ -148,13 +148,13 @@
if ((dev->curvol == 0) || (dev->muted)) {
outb_p(128+64+16+4 +1, port); /* wr-enable+data high */
outb_p(128+64+16+4+2+1, port); /* clock */
- }
+ }
else {
outb_p(128+64+16+8+4 +1, port); /* on+wr-enable+data high */
outb_p(128+64+16+8+4+2+1, port); /* clock */
}
- sleep_delay(1000);
+ sleep_delay(1000);
}
static int rt_setfreq(struct rt_device *dev, unsigned long freq)
@@ -167,9 +167,9 @@
freq += 171200; /* Add 10.7 MHz IF */
freq /= 800; /* Convert to 50 kHz units */
-
+
mutex_lock(&lock); /* Stop other ops interfering */
-
+
send_0_byte (io, dev); /* 0: LSB of frequency */
for (i = 0; i < 13; i++) /* : frequency bits (1-13) */
@@ -195,7 +195,7 @@
outb (0xd0, io); /* volume steady + sigstr */
else
outb (0xd8, io); /* volume steady + sigstr + on */
-
+
mutex_unlock(&lock);
return 0;
@@ -213,7 +213,7 @@
{
struct video_device *dev = video_devdata(file);
struct rt_device *rt=dev->priv;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -229,7 +229,7 @@
case VIDIOCGTUNER:
{
struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
+ if(v->tuner) /* Only 1 tuner */
return -EINVAL;
v->rangelow=(87*16000);
v->rangehigh=(108*16000);
@@ -261,21 +261,21 @@
return 0;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0, sizeof(*v));
v->flags|=VIDEO_AUDIO_MUTABLE|VIDEO_AUDIO_VOLUME;
v->volume=rt->curvol * 6554;
v->step=6554;
strcpy(v->name, "Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *v = arg;
- if(v->audio)
+ if(v->audio)
return -EINVAL;
- if(v->flags&VIDEO_AUDIO_MUTE)
+ if(v->flags&VIDEO_AUDIO_MUTE)
rt_mute(rt);
else
rt_setvol(rt,v->volume/6554);
@@ -298,7 +298,7 @@
.owner = THIS_MODULE,
.open = video_exclusive_open,
.release = video_exclusive_release,
- .ioctl = rt_ioctl,
+ .ioctl = rt_ioctl,
.compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
};
@@ -320,14 +320,14 @@
return -EINVAL;
}
- if (!request_region(io, 2, "rtrack"))
+ if (!request_region(io, 2, "rtrack"))
{
printk(KERN_ERR "rtrack: port 0x%x already in use\n", io);
return -EBUSY;
}
rtrack_radio.priv=&rtrack_unit;
-
+
if(video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr)==-1)
{
release_region(io, 2);
@@ -336,10 +336,10 @@
printk(KERN_INFO "AIMSlab RadioTrack/RadioReveal card driver.\n");
/* Set up the I/O locking */
-
+
mutex_init(&lock);
-
- /* mute card - prevents noisy bootups */
+
+ /* mute card - prevents noisy bootups */
/* this ensures that the volume is all the way down */
outb(0x48, io); /* volume down but still "on" */
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index 83bdae2..ca67624 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -1,11 +1,11 @@
-/* radio-aztech.c - Aztech radio card driver for Linux 2.2
+/* radio-aztech.c - Aztech radio card driver for Linux 2.2
*
- * Adapted to support the Video for Linux API by
+ * Adapted to support the Video for Linux API by
* Russell Kroll <rkroll@exploits.org>. Based on original tuner code by:
*
* Quay Ly
* Donald Song
- * Jason Lewis (jlewis@twilight.vtc.vsc.edu)
+ * Jason Lewis (jlewis@twilight.vtc.vsc.edu)
* Scott McGrath (smcgrath@twilight.vtc.vsc.edu)
* William McGrath (wmcgrath@twilight.vtc.vsc.edu)
*
@@ -39,7 +39,7 @@
#define CONFIG_RADIO_AZTECH_PORT -1
#endif
-static int io = CONFIG_RADIO_AZTECH_PORT;
+static int io = CONFIG_RADIO_AZTECH_PORT;
static int radio_nr = -1;
static int radio_wait_time = 1000;
static struct mutex lock;
@@ -53,15 +53,15 @@
static int volconvert(int level)
{
- level>>=14; /* Map 16bits down to 2 bit */
- level&=3;
-
+ level>>=14; /* Map 16bits down to 2 bit */
+ level&=3;
+
/* convert to card-friendly values */
- switch (level)
+ switch (level)
{
- case 0:
+ case 0:
return 0;
- case 1:
+ case 1:
return 1;
case 2:
return 4;
@@ -121,9 +121,9 @@
frequency += 171200; /* Add 10.7 MHz IF */
frequency /= 800; /* Convert to 50 kHz units */
-
+
mutex_lock(&lock);
-
+
send_0_byte (dev); /* 0: LSB of frequency */
for (i = 0; i < 13; i++) /* : frequency bits (1-13) */
@@ -151,7 +151,7 @@
udelay (radio_wait_time);
outb_p(128+64+volconvert(dev->curvol), io);
-
+
mutex_unlock(&lock);
return 0;
@@ -162,7 +162,7 @@
{
struct video_device *dev = video_devdata(file);
struct az_device *az = dev->priv;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -178,7 +178,7 @@
case VIDIOCGTUNER:
{
struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
+ if(v->tuner) /* Only 1 tuner */
return -EINVAL;
v->rangelow=(87*16000);
v->rangehigh=(108*16000);
@@ -211,7 +211,7 @@
return 0;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0, sizeof(*v));
v->flags|=VIDEO_AUDIO_MUTABLE|VIDEO_AUDIO_VOLUME;
@@ -222,17 +222,17 @@
v->volume=az->curvol;
v->step=16384;
strcpy(v->name, "Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *v = arg;
- if(v->audio)
+ if(v->audio)
return -EINVAL;
az->curvol=v->volume;
az->stereo=(v->mode&VIDEO_SOUND_STEREO)?1:0;
- if(v->flags&VIDEO_AUDIO_MUTE)
+ if(v->flags&VIDEO_AUDIO_MUTE)
az_setvol(az,0);
else
az_setvol(az,az->curvol);
@@ -277,7 +277,7 @@
return -EINVAL;
}
- if (!request_region(io, 2, "aztech"))
+ if (!request_region(io, 2, "aztech"))
{
printk(KERN_ERR "aztech: port 0x%x already in use\n", io);
return -EBUSY;
@@ -285,13 +285,13 @@
mutex_init(&lock);
aztech_radio.priv=&aztech_unit;
-
+
if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
{
release_region(io,2);
return -EINVAL;
}
-
+
printk(KERN_INFO "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
/* mute card - prevents noisy bootups */
outb (0, io);
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index f1b5ac8..c048454 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -8,7 +8,7 @@
* Russell Kroll (rkroll@exploits.org)
* Quay Ly
* Donald Song
- * Jason Lewis (jlewis@twilight.vtc.vsc.edu)
+ * Jason Lewis (jlewis@twilight.vtc.vsc.edu)
* Scott McGrath (smcgrath@twilight.vtc.vsc.edu)
* William McGrath (wmcgrath@twilight.vtc.vsc.edu)
*
@@ -55,29 +55,29 @@
/*
* Signal Strength Threshold Values
- * The V4L API spec does not define any particular unit for the signal
+ * The V4L API spec does not define any particular unit for the signal
* strength value. These values are in microvolts of RF at the tuner's input.
*/
static __u16 sigtable[2][4]={{5,10,30,150},{28,40,63,1000}};
static int cadet_getrds(void)
{
- int rdsstat=0;
+ int rdsstat=0;
spin_lock(&cadet_io_lock);
- outb(3,io); /* Select Decoder Control/Status */
+ outb(3,io); /* Select Decoder Control/Status */
outb(inb(io+1)&0x7f,io+1); /* Reset RDS detection */
spin_unlock(&cadet_io_lock);
-
+
msleep(100);
- spin_lock(&cadet_io_lock);
- outb(3,io); /* Select Decoder Control/Status */
+ spin_lock(&cadet_io_lock);
+ outb(3,io); /* Select Decoder Control/Status */
if((inb(io+1)&0x80)!=0) {
- rdsstat|=VIDEO_TUNER_RDS_ON;
+ rdsstat|=VIDEO_TUNER_RDS_ON;
}
if((inb(io+1)&0x10)!=0) {
- rdsstat|=VIDEO_TUNER_MBS_ON;
+ rdsstat|=VIDEO_TUNER_MBS_ON;
}
spin_unlock(&cadet_io_lock);
return rdsstat;
@@ -86,49 +86,49 @@
static int cadet_getstereo(void)
{
int ret = 0;
- if(curtuner != 0) /* Only FM has stereo capability! */
- return 0;
+ if(curtuner != 0) /* Only FM has stereo capability! */
+ return 0;
spin_lock(&cadet_io_lock);
- outb(7,io); /* Select tuner control */
+ outb(7,io); /* Select tuner control */
if( (inb(io+1) & 0x40) == 0)
- ret = 1;
- spin_unlock(&cadet_io_lock);
- return ret;
+ ret = 1;
+ spin_unlock(&cadet_io_lock);
+ return ret;
}
static unsigned cadet_gettune(void)
{
- int curvol,i;
+ int curvol,i;
unsigned fifo=0;
- /*
- * Prepare for read
- */
+ /*
+ * Prepare for read
+ */
spin_lock(&cadet_io_lock);
-
- outb(7,io); /* Select tuner control */
- curvol=inb(io+1); /* Save current volume/mute setting */
- outb(0x00,io+1); /* Ensure WRITE-ENABLE is LOW */
+
+ outb(7,io); /* Select tuner control */
+ curvol=inb(io+1); /* Save current volume/mute setting */
+ outb(0x00,io+1); /* Ensure WRITE-ENABLE is LOW */
tunestat=0xffff;
- /*
- * Read the shift register
- */
- for(i=0;i<25;i++) {
- fifo=(fifo<<1)|((inb(io+1)>>7)&0x01);
- if(i<24) {
- outb(0x01,io+1);
+ /*
+ * Read the shift register
+ */
+ for(i=0;i<25;i++) {
+ fifo=(fifo<<1)|((inb(io+1)>>7)&0x01);
+ if(i<24) {
+ outb(0x01,io+1);
tunestat&=inb(io+1);
- outb(0x00,io+1);
- }
- }
+ outb(0x00,io+1);
+ }
+ }
- /*
- * Restore volume/mute setting
- */
- outb(curvol,io+1);
+ /*
+ * Restore volume/mute setting
+ */
+ outb(curvol,io+1);
spin_unlock(&cadet_io_lock);
return fifo;
@@ -136,43 +136,43 @@
static unsigned cadet_getfreq(void)
{
- int i;
- unsigned freq=0,test,fifo=0;
+ int i;
+ unsigned freq=0,test,fifo=0;
/*
* Read current tuning
*/
fifo=cadet_gettune();
- /*
- * Convert to actual frequency
- */
+ /*
+ * Convert to actual frequency
+ */
if(curtuner==0) { /* FM */
- test=12500;
- for(i=0;i<14;i++) {
- if((fifo&0x01)!=0) {
- freq+=test;
- }
- test=test<<1;
- fifo=fifo>>1;
- }
- freq-=10700000; /* IF frequency is 10.7 MHz */
- freq=(freq*16)/1000000; /* Make it 1/16 MHz */
+ test=12500;
+ for(i=0;i<14;i++) {
+ if((fifo&0x01)!=0) {
+ freq+=test;
+ }
+ test=test<<1;
+ fifo=fifo>>1;
+ }
+ freq-=10700000; /* IF frequency is 10.7 MHz */
+ freq=(freq*16)/1000000; /* Make it 1/16 MHz */
}
if(curtuner==1) { /* AM */
- freq=((fifo&0x7fff)-2010)*16;
+ freq=((fifo&0x7fff)-2010)*16;
}
- return freq;
+ return freq;
}
static void cadet_settune(unsigned fifo)
{
- int i;
- unsigned test;
+ int i;
+ unsigned test;
spin_lock(&cadet_io_lock);
-
+
outb(7,io); /* Select tuner control */
/*
* Write the shift register
@@ -183,7 +183,7 @@
outb(7,io); /* Select tuner control */
outb(test,io+1); /* Initialize for write */
for(i=0;i<25;i++) {
- test|=0x01; /* Toggle SCK High */
+ test|=0x01; /* Toggle SCK High */
outb(test,io+1);
test&=0xfe; /* Toggle SCK Low */
outb(test,io+1);
@@ -196,57 +196,57 @@
static void cadet_setfreq(unsigned freq)
{
- unsigned fifo;
- int i,j,test;
- int curvol;
+ unsigned fifo;
+ int i,j,test;
+ int curvol;
- /*
- * Formulate a fifo command
- */
+ /*
+ * Formulate a fifo command
+ */
fifo=0;
if(curtuner==0) { /* FM */
- test=102400;
- freq=(freq*1000)/16; /* Make it kHz */
- freq+=10700; /* IF is 10700 kHz */
- for(i=0;i<14;i++) {
- fifo=fifo<<1;
- if(freq>=test) {
- fifo|=0x01;
- freq-=test;
- }
- test=test>>1;
- }
+ test=102400;
+ freq=(freq*1000)/16; /* Make it kHz */
+ freq+=10700; /* IF is 10700 kHz */
+ for(i=0;i<14;i++) {
+ fifo=fifo<<1;
+ if(freq>=test) {
+ fifo|=0x01;
+ freq-=test;
+ }
+ test=test>>1;
+ }
}
if(curtuner==1) { /* AM */
- fifo=(freq/16)+2010; /* Make it kHz */
+ fifo=(freq/16)+2010; /* Make it kHz */
fifo|=0x100000; /* Select AM Band */
}
- /*
- * Save current volume/mute setting
- */
+ /*
+ * Save current volume/mute setting
+ */
spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
- curvol=inb(io+1);
- spin_unlock(&cadet_io_lock);
+ curvol=inb(io+1);
+ spin_unlock(&cadet_io_lock);
/*
* Tune the card
*/
for(j=3;j>-1;j--) {
- cadet_settune(fifo|(j<<16));
-
- spin_lock(&cadet_io_lock);
+ cadet_settune(fifo|(j<<16));
+
+ spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
outb(curvol,io+1);
spin_unlock(&cadet_io_lock);
-
+
msleep(100);
cadet_gettune();
if((tunestat & 0x40) == 0) { /* Tuned */
- sigstrength=sigtable[curtuner][j];
+ sigstrength=sigtable[curtuner][j];
return;
}
}
@@ -257,28 +257,28 @@
static int cadet_getvol(void)
{
int ret = 0;
-
+
spin_lock(&cadet_io_lock);
-
- outb(7,io); /* Select tuner control */
- if((inb(io + 1) & 0x20) != 0)
- ret = 0xffff;
-
- spin_unlock(&cadet_io_lock);
- return ret;
+
+ outb(7,io); /* Select tuner control */
+ if((inb(io + 1) & 0x20) != 0)
+ ret = 0xffff;
+
+ spin_unlock(&cadet_io_lock);
+ return ret;
}
static void cadet_setvol(int vol)
{
spin_lock(&cadet_io_lock);
- outb(7,io); /* Select tuner control */
- if(vol>0)
- outb(0x20,io+1);
- else
- outb(0x00,io+1);
+ outb(7,io); /* Select tuner control */
+ if(vol>0)
+ outb(0x20,io+1);
+ else
+ outb(0x00,io+1);
spin_unlock(&cadet_io_lock);
-}
+}
static void cadet_handler(unsigned long data)
{
@@ -288,15 +288,15 @@
if(spin_trylock(&cadet_io_lock))
{
- outb(0x3,io); /* Select RDS Decoder Control */
+ outb(0x3,io); /* Select RDS Decoder Control */
if((inb(io+1)&0x20)!=0) {
- printk(KERN_CRIT "cadet: RDS fifo overflow\n");
+ printk(KERN_CRIT "cadet: RDS fifo overflow\n");
}
outb(0x80,io); /* Select RDS fifo */
while((inb(io)&0x80)!=0) {
- rdsbuf[rdsin]=inb(io+1);
+ rdsbuf[rdsin]=inb(io+1);
if(rdsin==rdsout)
- printk(KERN_WARNING "cadet: RDS buffer overflow\n");
+ printk(KERN_WARNING "cadet: RDS buffer overflow\n");
else
rdsin++;
}
@@ -307,9 +307,9 @@
* Service pending read
*/
if( rdsin!=rdsout)
- wake_up_interruptible(&read_queue);
+ wake_up_interruptible(&read_queue);
- /*
+ /*
* Clean up and exit
*/
init_timer(&readtimer);
@@ -324,12 +324,12 @@
static ssize_t cadet_read(struct file *file, char __user *data,
size_t count, loff_t *ppos)
{
- int i=0;
+ int i=0;
unsigned char readbuf[RDS_BUFFER];
- if(rdsstat==0) {
+ if(rdsstat==0) {
spin_lock(&cadet_io_lock);
- rdsstat=1;
+ rdsstat=1;
outb(0x80,io); /* Select RDS fifo */
spin_unlock(&cadet_io_lock);
init_timer(&readtimer);
@@ -339,15 +339,15 @@
add_timer(&readtimer);
}
if(rdsin==rdsout) {
- if (file->f_flags & O_NONBLOCK)
- return -EWOULDBLOCK;
- interruptible_sleep_on(&read_queue);
- }
+ if (file->f_flags & O_NONBLOCK)
+ return -EWOULDBLOCK;
+ interruptible_sleep_on(&read_queue);
+ }
while( i<count && rdsin!=rdsout)
- readbuf[i++]=rdsbuf[rdsout++];
+ readbuf[i++]=rdsbuf[rdsout++];
if (copy_to_user(data,readbuf,i))
- return -EFAULT;
+ return -EFAULT;
return i;
}
@@ -375,29 +375,29 @@
return -EINVAL;
}
switch(v->tuner) {
- case 0:
- strcpy(v->name,"FM");
- v->rangelow=1400; /* 87.5 MHz */
- v->rangehigh=1728; /* 108.0 MHz */
- v->flags=0;
- v->mode=0;
- v->mode|=VIDEO_MODE_AUTO;
- v->signal=sigstrength;
- if(cadet_getstereo()==1) {
- v->flags|=VIDEO_TUNER_STEREO_ON;
- }
+ case 0:
+ strcpy(v->name,"FM");
+ v->rangelow=1400; /* 87.5 MHz */
+ v->rangehigh=1728; /* 108.0 MHz */
+ v->flags=0;
+ v->mode=0;
+ v->mode|=VIDEO_MODE_AUTO;
+ v->signal=sigstrength;
+ if(cadet_getstereo()==1) {
+ v->flags|=VIDEO_TUNER_STEREO_ON;
+ }
v->flags|=cadet_getrds();
- break;
- case 1:
- strcpy(v->name,"AM");
- v->rangelow=8320; /* 520 kHz */
- v->rangehigh=26400; /* 1650 kHz */
- v->flags=0;
- v->flags|=VIDEO_TUNER_LOW;
- v->mode=0;
- v->mode|=VIDEO_MODE_AUTO;
- v->signal=sigstrength;
- break;
+ break;
+ case 1:
+ strcpy(v->name,"AM");
+ v->rangelow=8320; /* 520 kHz */
+ v->rangehigh=26400; /* 1650 kHz */
+ v->flags=0;
+ v->flags|=VIDEO_TUNER_LOW;
+ v->mode=0;
+ v->mode|=VIDEO_MODE_AUTO;
+ v->signal=sigstrength;
+ break;
}
return 0;
}
@@ -407,49 +407,49 @@
if((v->tuner<0)||(v->tuner>1)) {
return -EINVAL;
}
- curtuner=v->tuner;
+ curtuner=v->tuner;
return 0;
}
case VIDIOCGFREQ:
{
- unsigned long *freq = arg;
+ unsigned long *freq = arg;
*freq = cadet_getfreq();
return 0;
}
case VIDIOCSFREQ:
{
- unsigned long *freq = arg;
+ unsigned long *freq = arg;
if((curtuner==0)&&((*freq<1400)||(*freq>1728))) {
- return -EINVAL;
+ return -EINVAL;
}
if((curtuner==1)&&((*freq<8320)||(*freq>26400))) {
- return -EINVAL;
+ return -EINVAL;
}
cadet_setfreq(*freq);
return 0;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0, sizeof(*v));
v->flags=VIDEO_AUDIO_MUTABLE|VIDEO_AUDIO_VOLUME;
if(cadet_getstereo()==0) {
- v->mode=VIDEO_SOUND_MONO;
+ v->mode=VIDEO_SOUND_MONO;
} else {
v->mode=VIDEO_SOUND_STEREO;
}
v->volume=cadet_getvol();
v->step=0xffff;
strcpy(v->name, "Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *v = arg;
- if(v->audio)
+ if(v->audio)
return -EINVAL;
cadet_setvol(v->volume);
- if(v->flags&VIDEO_AUDIO_MUTE)
+ if(v->flags&VIDEO_AUDIO_MUTE)
cadet_setvol(0);
else
cadet_setvol(0xffff);
@@ -539,16 +539,16 @@
static int cadet_probe(void)
{
- static int iovals[8]={0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e};
+ static int iovals[8]={0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e};
int i;
for(i=0;i<8;i++) {
- io=iovals[i];
+ io=iovals[i];
if (request_region(io, 2, "cadet-probe")) {
- cadet_setfreq(1410);
+ cadet_setfreq(1410);
if(cadet_getfreq()==1410) {
release_region(io, 2);
- return io;
+ return io;
}
release_region(io, 2);
}
@@ -556,7 +556,7 @@
return -1;
}
-/*
+/*
* io should only be set if the user has used something like
* isapnp (the userspace program) to initialize this card for us
*/
@@ -564,7 +564,7 @@
static int __init cadet_init(void)
{
spin_lock_init(&cadet_io_lock);
-
+
/*
* If a probe was requested then probe ISAPnP first (safest)
*/
@@ -579,12 +579,12 @@
/*
* Else we bail out
*/
-
- if(io < 0) {
-#ifdef MODULE
+
+ if(io < 0) {
+#ifdef MODULE
printk(KERN_ERR "You must set an I/O address with io=0x???\n");
#endif
- goto fail;
+ goto fail;
}
if (!request_region(io,2,"cadet"))
goto fail;
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index 8e499b8..d5c3c4b 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -1,6 +1,6 @@
/*
***************************************************************************
- *
+ *
* radio-gemtek-pci.c - Gemtek PCI Radio driver
* (C) 2001 Vladimir Shebordaev <vshebordaev@mail.ru>
*
@@ -31,7 +31,7 @@
* radio device driver.
*
* Please, let me know if this piece of code was useful :)
- *
+ *
* TODO: multiple device support and portability were not tested
*
***************************************************************************
@@ -69,18 +69,18 @@
#define TRUE (1)
#endif
-#ifndef FALSE
+#ifndef FALSE
#define FALSE (0)
#endif
struct gemtek_pci_card {
struct video_device *videodev;
-
+
u32 iobase;
u32 length;
u8 chiprev;
u16 model;
-
+
u32 current_frequency;
u8 mute;
};
@@ -96,7 +96,7 @@
return (u8)value;
}
-#define _b0( v ) *((u8 *)&v)
+#define _b0( v ) *((u8 *)&v)
static void __gemtek_pci_cmd( u16 value, u32 port, u8 *last_byte, int keep )
{
register u8 byte = *last_byte;
@@ -104,7 +104,7 @@
if ( !value ) {
if ( !keep )
value = (u16)port;
- byte &= 0xfd;
+ byte &= 0xfd;
} else
byte |= 2;
@@ -116,7 +116,7 @@
byte &= 0xfe;
_b0( value ) = byte;
outw( value, port );
-
+
*last_byte = byte;
}
@@ -193,13 +193,13 @@
c->audios = 1;
strcpy( c->name, "Gemtek PCI Radio" );
return 0;
- }
+ }
case VIDIOCGTUNER:
{
struct video_tuner *t = arg;
- if ( t->tuner )
+ if ( t->tuner )
return -EINVAL;
t->rangelow = GEMTEK_PCI_RANGE_LOW;
@@ -228,7 +228,7 @@
case VIDIOCSFREQ:
{
unsigned long *freq = arg;
-
+
if ( (*freq < GEMTEK_PCI_RANGE_LOW) ||
(*freq > GEMTEK_PCI_RANGE_HIGH) )
return -EINVAL;
@@ -239,9 +239,9 @@
return 0;
}
-
+
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *a = arg;
memset( a, 0, sizeof( *a ) );
@@ -249,17 +249,17 @@
a->volume = 1;
a->step = 65535;
strcpy( a->name, "Radio" );
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *a = arg;
- if ( a->audio )
+ if ( a->audio )
return -EINVAL;
- if ( a->flags & VIDEO_AUDIO_MUTE )
+ if ( a->flags & VIDEO_AUDIO_MUTE )
gemtek_pci_mute( card );
else
gemtek_pci_unmute( card );
@@ -323,9 +323,9 @@
return -ENOMEM;
}
- if ( pci_enable_device( pci_dev ) )
+ if ( pci_enable_device( pci_dev ) )
goto err_pci;
-
+
card->iobase = pci_resource_start( pci_dev, 0 );
card->length = pci_resource_len( pci_dev, 0 );
@@ -338,7 +338,7 @@
pci_read_config_word( pci_dev, PCI_SUBSYSTEM_ID, &card->model );
pci_set_drvdata( pci_dev, card );
-
+
if ( (devradio = kmalloc( sizeof( struct video_device ), GFP_KERNEL )) == NULL ) {
printk( KERN_ERR "gemtek_pci: out of memory\n" );
goto err_video;
@@ -354,7 +354,7 @@
devradio->priv = card;
gemtek_pci_mute( card );
- printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
+ printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
card->chiprev, card->iobase, card->iobase + card->length - 1 );
return 0;
@@ -364,7 +364,7 @@
err_pci:
kfree( card );
- return -ENODEV;
+ return -ENODEV;
}
static void __devexit gemtek_pci_remove( struct pci_dev *pci_dev )
@@ -375,12 +375,12 @@
kfree( card->videodev );
release_region( card->iobase, card->length );
-
+
if ( mx )
gemtek_pci_mute( card );
kfree( card );
-
+
pci_set_drvdata( pci_dev, NULL );
}
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 47173be..77a1e12 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -6,7 +6,7 @@
* Besides the protocol changes, this is mostly a copy of:
*
* RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
- *
+ *
* Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
* Converted to new API by Alan Cox <Alan.Cox@linux.org>
* Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
@@ -29,7 +29,7 @@
#define CONFIG_RADIO_GEMTEK_PORT -1
#endif
-static int io = CONFIG_RADIO_GEMTEK_PORT;
+static int io = CONFIG_RADIO_GEMTEK_PORT;
static int radio_nr = -1;
static spinlock_t lock;
@@ -48,7 +48,7 @@
*/
static void gemtek_mute(struct gemtek_device *dev)
{
- if(dev->muted)
+ if(dev->muted)
return;
spin_lock(&lock);
outb(0x10, io);
@@ -94,20 +94,20 @@
freq /= 100000;
spin_lock(&lock);
-
+
/* 2 start bits */
outb_p(0x03, io);
udelay(5);
outb_p(0x07, io);
udelay(5);
- /* 28 frequency bits (lsb first) */
+ /* 28 frequency bits (lsb first) */
for (i = 0; i < 14; i++)
if (freq & (1 << i))
one();
else
zero();
- /* 36 unknown bits */
+ /* 36 unknown bits */
for (i = 0; i < 11; i++)
zero();
one();
@@ -123,7 +123,7 @@
udelay(5);
spin_unlock(&lock);
-
+
return 0;
}
@@ -159,7 +159,7 @@
case VIDIOCGTUNER:
{
struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
+ if(v->tuner) /* Only 1 tuner */
return -EINVAL;
v->rangelow=87*16000;
v->rangehigh=108*16000;
@@ -193,25 +193,25 @@
return 0;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0, sizeof(*v));
v->flags|=VIDEO_AUDIO_MUTABLE;
v->volume=1;
v->step=65535;
strcpy(v->name, "Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *v = arg;
- if(v->audio)
+ if(v->audio)
return -EINVAL;
- if(v->flags&VIDEO_AUDIO_MUTE)
+ if(v->flags&VIDEO_AUDIO_MUTE)
gemtek_mute(rt);
else
- gemtek_unmute(rt);
+ gemtek_unmute(rt);
return 0;
}
@@ -254,14 +254,14 @@
return -EINVAL;
}
- if (!request_region(io, 4, "gemtek"))
+ if (!request_region(io, 4, "gemtek"))
{
printk(KERN_ERR "gemtek: port 0x%x already in use\n", io);
return -EBUSY;
}
gemtek_radio.priv=&gemtek_unit;
-
+
if(video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr)==-1)
{
release_region(io, 4);
@@ -274,7 +274,7 @@
/* this is _maybe_ unnecessary */
outb(0x01, io);
- /* mute card - prevents noisy bootups */
+ /* mute card - prevents noisy bootups */
gemtek_unit.muted = 0;
gemtek_mute(&gemtek_unit);
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index 39c1d91..2501792 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -2,7 +2,7 @@
* (c) 2000 A. Tlalka, atlka@pg.gda.pl
* Notes on the hardware
*
- * + Frequency control is done digitally
+ * + Frequency control is done digitally
* + No volume control - only mute/unmute - you have to use Aux line volume
* control on Maestro card to set the volume
* + Radio status (tuned/not_tuned and stereo/mono) is valid some time after
@@ -103,7 +103,7 @@
struct radio_device {
u16 io, /* base of Maestro card radio io (GPIO_DATA)*/
muted, /* VIDEO_AUDIO_MUTE */
- stereo, /* VIDEO_TUNER_STEREO_ON */
+ stereo, /* VIDEO_TUNER_STEREO_ON */
tuned; /* signal strength (0 or 0xffff) */
struct mutex lock;
};
@@ -122,14 +122,14 @@
for (l=24;l--;) {
outw(STR_CLK, io); /* HI state */
udelay(2);
- if(!l)
+ if(!l)
dev->tuned = inw(io) & STR_MOST ? 0 : 0xffff;
outw(0, io); /* LO state */
udelay(2);
data <<= 1; /* shift data */
rdata = inw(io);
if(!l)
- dev->stereo = rdata & STR_MOST ?
+ dev->stereo = rdata & STR_MOST ?
0 : VIDEO_TUNER_STEREO_ON;
else
if(rdata & STR_DATA)
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index f0bf47b..fe25525 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -1,15 +1,15 @@
-/*
- * Guillemot Maxi Radio FM 2000 PCI radio card driver for Linux
+/*
+ * Guillemot Maxi Radio FM 2000 PCI radio card driver for Linux
* (C) 2001 Dimitromanolakis Apostolos <apdim@grecian.net>
*
* Based in the radio Maestro PCI driver. Actually it uses the same chip
* for radio but different pci controller.
*
* I didn't have any specs I reversed engineered the protocol from
- * the windows driver (radio.dll).
+ * the windows driver (radio.dll).
*
* The card uses the TEA5757 chip that includes a search function but it
- * is useless as I haven't found any way to read back the frequency. If
+ * is useless as I haven't found any way to read back the frequency. If
* anybody does please mail me.
*
* For the pdf file see:
@@ -24,7 +24,7 @@
* - tiding up
* - removed support for multiple devices as it didn't work anyway
*
- * BUGS:
+ * BUGS:
* - card unmutes if you change frequency
*
*/
@@ -80,7 +80,7 @@
.owner = THIS_MODULE,
.open = video_exclusive_open,
.release = video_exclusive_release,
- .ioctl = radio_ioctl,
+ .ioctl = radio_ioctl,
.compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
};
@@ -97,11 +97,11 @@
{
__u16 io, /* base of radio io */
muted, /* VIDEO_AUDIO_MUTE */
- stereo, /* VIDEO_TUNER_STEREO_ON */
+ stereo, /* VIDEO_TUNER_STEREO_ON */
tuned; /* signal strength (0 or 0xffff) */
-
+
unsigned long freq;
-
+
struct mutex lock;
} radio_unit = {0, 0, 0, 0, };
@@ -114,7 +114,7 @@
outb( power|wren|data|clk ,io); udelay(4);
outb( power|wren|data ,io); udelay(4);
}
- else
+ else
{
outb( power|wren ,io); udelay(4);
outb( power|wren|clk ,io); udelay(4);
@@ -132,12 +132,12 @@
{
unsigned long int si;
int bl;
-
+
/* TEA5757 shift register bits (see pdf) */
- outbit(0,io); // 24 search
+ outbit(0,io); // 24 search
outbit(1,io); // 23 search up/down
-
+
outbit(0,io); // 22 stereo/mono
outbit(0,io); // 21 band
@@ -145,24 +145,24 @@
outbit(0,io); // 19 port ?
outbit(0,io); // 18 port ?
-
+
outbit(0,io); // 17 search level
outbit(0,io); // 16 search level
-
+
si = 0x8000;
for(bl = 1; bl <= 16 ; bl++) { outbit(data & si,io); si >>=1; }
-
+
outb(power,io);
}
static int get_stereo(__u16 io)
-{
+{
outb(power,io); udelay(4);
return !(inb(io) & mo_st);
}
static int get_tune(__u16 io)
-{
+{
outb(power+clk,io); udelay(4);
return !(inb(io) & mo_st);
}
@@ -177,7 +177,7 @@
switch(cmd) {
case VIDIOCGCAP: {
struct video_capability *v = arg;
-
+
memset(v,0,sizeof(*v));
strcpy(v->name, "Maxi Radio FM2000 radio");
v->type=VID_TYPE_TUNER;
@@ -186,22 +186,22 @@
}
case VIDIOCGTUNER: {
struct video_tuner *v = arg;
-
+
if(v->tuner)
return -EINVAL;
-
+
card->stereo = 0xffff * get_stereo(card->io);
card->tuned = 0xffff * get_tune(card->io);
-
+
v->flags = VIDEO_TUNER_LOW | card->stereo;
v->signal = card->tuned;
-
+
strcpy(v->name, "FM");
-
+
v->rangelow = FREQ_LO;
v->rangehigh = FREQ_HI;
v->mode = VIDEO_MODE_AUTO;
-
+
return 0;
}
case VIDIOCSTUNER: {
@@ -212,13 +212,13 @@
}
case VIDIOCGFREQ: {
unsigned long *freq = arg;
-
+
*freq = card->freq;
return 0;
}
case VIDIOCSFREQ: {
unsigned long *freq = arg;
-
+
if (*freq < FREQ_LO || *freq > FREQ_HI)
return -EINVAL;
card->freq = *freq;
@@ -226,18 +226,18 @@
msleep(125);
return 0;
}
- case VIDIOCGAUDIO: {
+ case VIDIOCGAUDIO: {
struct video_audio *v = arg;
memset(v,0,sizeof(*v));
strcpy(v->name, "Radio");
v->flags=VIDEO_AUDIO_MUTABLE | card->muted;
v->mode=VIDEO_SOUND_STEREO;
- return 0;
+ return 0;
}
-
+
case VIDIOCSAUDIO: {
struct video_audio *v = arg;
-
+
if(v->audio)
return -EINVAL;
card->muted = v->flags & VIDEO_AUDIO_MUTE;
@@ -249,13 +249,13 @@
}
case VIDIOCGUNIT: {
struct video_unit *v = arg;
-
+
v->video=VIDEO_NO_UNIT;
v->vbi=VIDEO_NO_UNIT;
v->radio=dev->minor;
v->audio=0;
v->teletext=VIDEO_NO_UNIT;
- return 0;
+ return 0;
}
default: return -ENOIOCTLCMD;
}
@@ -267,7 +267,7 @@
struct video_device *dev = video_devdata(file);
struct radio_device *card=dev->priv;
int ret;
-
+
mutex_lock(&card->lock);
ret = video_usercopy(inode, file, cmd, arg, radio_function);
mutex_unlock(&card->lock);
@@ -282,21 +282,21 @@
static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
if(!request_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0), "Maxi Radio FM 2000")) {
- printk(KERN_ERR "radio-maxiradio: can't reserve I/O ports\n");
- goto err_out;
+ pci_resource_len(pdev, 0), "Maxi Radio FM 2000")) {
+ printk(KERN_ERR "radio-maxiradio: can't reserve I/O ports\n");
+ goto err_out;
}
if (pci_enable_device(pdev))
- goto err_out_free_region;
+ goto err_out_free_region;
radio_unit.io = pci_resource_start(pdev, 0);
mutex_init(&radio_unit.lock);
maxiradio_radio.priv = &radio_unit;
if(video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr)==-1) {
- printk("radio-maxiradio: can't register device!");
- goto err_out_free_region;
+ printk("radio-maxiradio: can't register device!");
+ goto err_out_free_region;
}
printk(KERN_INFO "radio-maxiradio: version "
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index 28a47c9..3821d25 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -1,5 +1,5 @@
/* RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
- *
+ *
* Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
* Converted to new API by Alan Cox <Alan.Cox@linux.org>
* Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
@@ -22,7 +22,7 @@
#define CONFIG_RADIO_RTRACK2_PORT -1
#endif
-static int io = CONFIG_RADIO_RTRACK2_PORT;
+static int io = CONFIG_RADIO_RTRACK2_PORT;
static int radio_nr = -1;
static spinlock_t lock;
@@ -38,7 +38,7 @@
static void rt_mute(struct rt_device *dev)
{
- if(dev->muted)
+ if(dev->muted)
return;
spin_lock(&lock);
outb(1, io);
@@ -58,14 +58,14 @@
static void zero(void)
{
- outb_p(1, io);
+ outb_p(1, io);
outb_p(3, io);
outb_p(1, io);
}
static void one(void)
{
- outb_p(5, io);
+ outb_p(5, io);
outb_p(7, io);
outb_p(5, io);
}
@@ -75,7 +75,7 @@
int i;
freq = freq / 200 + 856;
-
+
spin_lock(&lock);
outb_p(0xc8, io);
@@ -94,7 +94,7 @@
outb_p(0xc8, io);
if (!dev->muted)
outb_p(0, io);
-
+
spin_unlock(&lock);
return 0;
}
@@ -127,7 +127,7 @@
case VIDIOCGTUNER:
{
struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
+ if(v->tuner) /* Only 1 tuner */
return -EINVAL;
v->rangelow=88*16000;
v->rangehigh=108*16000;
@@ -159,25 +159,25 @@
return 0;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0, sizeof(*v));
v->flags|=VIDEO_AUDIO_MUTABLE;
v->volume=1;
v->step=65535;
strcpy(v->name, "Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *v = arg;
- if(v->audio)
+ if(v->audio)
return -EINVAL;
- if(v->flags&VIDEO_AUDIO_MUTE)
+ if(v->flags&VIDEO_AUDIO_MUTE)
rt_mute(rt);
else
- rt_unmute(rt);
+ rt_unmute(rt);
return 0;
}
@@ -219,7 +219,7 @@
printk(KERN_ERR "You must set an I/O address with io=0x20c or io=0x30c\n");
return -EINVAL;
}
- if (!request_region(io, 4, "rtrack2"))
+ if (!request_region(io, 4, "rtrack2"))
{
printk(KERN_ERR "rtrack2: port 0x%x already in use\n", io);
return -EBUSY;
@@ -227,16 +227,16 @@
rtrack2_radio.priv=&rtrack2_unit;
- spin_lock_init(&lock);
+ spin_lock_init(&lock);
if(video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr)==-1)
{
release_region(io, 4);
return -EINVAL;
}
-
+
printk(KERN_INFO "AIMSlab Radiotrack II card driver.\n");
- /* mute card - prevents noisy bootups */
+ /* mute card - prevents noisy bootups */
outb(1, io);
rtrack2_unit.muted = 1;
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 53073b4..70cfbc3 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -12,7 +12,7 @@
* Frequency control is done digitally -- ie out(port,encodefreq(95.8));
* No volume control - only mute/unmute - you have to use line volume
* control on SB-part of SF16FMI
- *
+ *
*/
#include <linux/kernel.h> /* __setup */
@@ -29,19 +29,19 @@
struct fmi_device
{
int port;
- int curvol; /* 1 or 0 */
- unsigned long curfreq; /* freq in kHz */
- __u32 flags;
+ int curvol; /* 1 or 0 */
+ unsigned long curfreq; /* freq in kHz */
+ __u32 flags;
};
-static int io = -1;
+static int io = -1;
static int radio_nr = -1;
static struct pnp_dev *dev = NULL;
static struct mutex lock;
/* freq is in 1/16 kHz to internal number, hw precision is 50 kHz */
/* It is only useful to give freq in intervall of 800 (=0.05Mhz),
- * other bits will be truncated, e.g 92.7400016 -> 92.7, but
+ * other bits will be truncated, e.g 92.7400016 -> 92.7, but
* 92.7400017 -> 92.75
*/
#define RSF16_ENCODE(x) ((x)/800+214)
@@ -51,7 +51,7 @@
static void outbits(int bits, unsigned int data, int port)
{
while(bits--) {
- if(data & 1) {
+ if(data & 1) {
outb(5, port);
udelay(6);
outb(7, port);
@@ -101,7 +101,7 @@
int res;
int myport = dev->port;
-
+
mutex_lock(&lock);
val = dev->curvol ? 0x08 : 0x00; /* unmute/mute */
outb(val, myport);
@@ -109,7 +109,7 @@
msleep(143); /* was schedule_timeout(HZ/7) */
res = (int)inb(myport+1);
outb(val, myport);
-
+
mutex_unlock(&lock);
return (res & 2) ? 0 : 0xFFFF;
}
@@ -119,7 +119,7 @@
{
struct video_device *dev = video_devdata(file);
struct fmi_device *fmi=dev->priv;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -174,18 +174,18 @@
return -EINVAL;
/*rounding in steps of 800 to match th freq
that will be used */
- fmi->curfreq = (*freq/800)*800;
+ fmi->curfreq = (*freq/800)*800;
fmi_setfreq(fmi);
return 0;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0,sizeof(*v));
v->flags=( (!fmi->curvol)*VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE);
strcpy(v->name, "Radio");
v->mode=VIDEO_SOUND_STEREO;
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
@@ -193,19 +193,19 @@
if(v->audio)
return -EINVAL;
fmi->curvol= v->flags&VIDEO_AUDIO_MUTE ? 0 : 1;
- fmi->curvol ?
+ fmi->curvol ?
fmi_unmute(fmi->port) : fmi_mute(fmi->port);
return 0;
}
- case VIDIOCGUNIT:
+ case VIDIOCGUNIT:
{
- struct video_unit *v = arg;
+ struct video_unit *v = arg;
v->video=VIDEO_NO_UNIT;
v->vbi=VIDEO_NO_UNIT;
v->radio=dev->minor;
v->audio=0; /* How do we find out this??? */
v->teletext=VIDEO_NO_UNIT;
- return 0;
+ return 0;
}
default:
return -ENOIOCTLCMD;
@@ -295,14 +295,14 @@
fmi_unit.curfreq = 0;
fmi_unit.flags = VIDEO_TUNER_LOW;
fmi_radio.priv = &fmi_unit;
-
+
mutex_init(&lock);
-
+
if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) == -1) {
release_region(io, 2);
return -EINVAL;
}
-
+
printk(KERN_INFO "SF16FMx radio card driver at 0x%x\n", io);
/* mute card - prevents noisy bootups */
fmi_mute(io);
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index bcebd8c..ca560a4 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -202,7 +202,7 @@
}
static int fmr2_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
+ unsigned int cmd, void *arg)
{
struct video_device *dev = video_devdata(file);
struct fmr2_device *fmr2 = dev->priv;
@@ -344,7 +344,7 @@
}
static int fmr2_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
return video_usercopy(inode, file, cmd, arg, fmr2_do_ioctl);
}
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index fcfde2e..3ac0c36 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -2,11 +2,11 @@
* (c) 1999 R. Offermanns (rolf@offermanns.de)
* based on the aimslab radio driver from M. Kirkwood
* many thanks to Michael Becker and Friedhelm Birth (from TerraTec)
- *
+ *
*
* History:
* 1999-05-21 First preview release
- *
+ *
* Notes on the hardware:
* There are two "main" chips on the card:
* - Philips OM5610 (http://www-us.semiconductors.philips.com/acrobat/datasheets/OM5610_2.pdf)
@@ -20,7 +20,7 @@
* (as soon i have understand how to get started :)
* If you can help me out with that, please contact me!!
*
- *
+ *
*/
#include <linux/module.h> /* Modules */
@@ -49,7 +49,7 @@
#define WRT_EN 0x10
/*******************************************************************/
-static int io = CONFIG_RADIO_TERRATEC_PORT;
+static int io = CONFIG_RADIO_TERRATEC_PORT;
static int radio_nr = -1;
static spinlock_t lock;
@@ -88,15 +88,15 @@
static int tt_setvol(struct tt_device *dev, int vol)
{
-
+
// printk(KERN_ERR "setvol called, vol = %d\n", vol);
if(vol == dev->curvol) { /* requested volume = current */
if (dev->muted) { /* user is unmuting the card */
dev->muted = 0;
cardWriteVol(vol); /* enable card */
- }
-
+ }
+
return 0;
}
@@ -107,9 +107,9 @@
}
dev->muted = 0;
-
+
cardWriteVol(vol);
-
+
dev->curvol = vol;
return 0;
@@ -121,13 +121,13 @@
/* many more or less strange things are going on here, but hey, it works :) */
static int tt_setfreq(struct tt_device *dev, unsigned long freq1)
-{
+{
int freq;
int i;
int p;
int temp;
long rest;
-
+
unsigned char buffer[25]; /* we have to bit shift 25 registers */
freq = freq1/160; /* convert the freq. to a nice to handle value */
for(i=24;i>-1;i--)
@@ -142,9 +142,9 @@
{
if (rest%temp == rest)
buffer[i] = 0;
- else
+ else
{
- buffer[i] = 1;
+ buffer[i] = 1;
rest = rest-temp;
}
i--;
@@ -153,10 +153,10 @@
}
spin_lock(&lock);
-
+
for (i=24;i>-1;i--) /* bit shift the values to the radiocard */
{
- if (buffer[i]==1)
+ if (buffer[i]==1)
{
outb(WRT_EN|DATA, BASEPORT);
outb(WRT_EN|DATA|CLK_ON , BASEPORT);
@@ -168,11 +168,11 @@
outb(WRT_EN|0x00|CLK_ON , BASEPORT);
}
}
- outb(0x00, BASEPORT);
-
+ outb(0x00, BASEPORT);
+
spin_unlock(&lock);
-
- return 0;
+
+ return 0;
}
static int tt_getsigstr(struct tt_device *dev) /* TODO */
@@ -190,7 +190,7 @@
{
struct video_device *dev = video_devdata(file);
struct tt_device *tt=dev->priv;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -206,7 +206,7 @@
case VIDIOCGTUNER:
{
struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
+ if(v->tuner) /* Only 1 tuner */
return -EINVAL;
v->rangelow=(87*16000);
v->rangehigh=(108*16000);
@@ -238,21 +238,21 @@
return 0;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0, sizeof(*v));
v->flags|=VIDEO_AUDIO_MUTABLE|VIDEO_AUDIO_VOLUME;
v->volume=tt->curvol * 6554;
v->step=6554;
strcpy(v->name, "Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *v = arg;
- if(v->audio)
+ if(v->audio)
return -EINVAL;
- if(v->flags&VIDEO_AUDIO_MUTE)
+ if(v->flags&VIDEO_AUDIO_MUTE)
tt_mute(tt);
else
tt_setvol(tt,v->volume/6554);
@@ -296,25 +296,25 @@
printk(KERN_ERR "You must set an I/O address with io=0x???\n");
return -EINVAL;
}
- if (!request_region(io, 2, "terratec"))
+ if (!request_region(io, 2, "terratec"))
{
printk(KERN_ERR "TerraTec: port 0x%x already in use\n", io);
return -EBUSY;
}
terratec_radio.priv=&terratec_unit;
-
+
spin_lock_init(&lock);
-
+
if(video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr)==-1)
{
release_region(io,2);
return -EINVAL;
}
-
+
printk(KERN_INFO "TERRATEC ActivRadio Standalone card driver.\n");
- /* mute card - prevents noisy bootups */
+ /* mute card - prevents noisy bootups */
/* this ensures that the volume is all the way down */
cardWriteVol(0);
@@ -334,7 +334,7 @@
{
video_unregister_device(&terratec_radio);
release_region(io,2);
- printk(KERN_INFO "TERRATEC ActivRadio Standalone card driver unloaded.\n");
+ printk(KERN_INFO "TERRATEC ActivRadio Standalone card driver unloaded.\n");
}
module_init(terratec_init);
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index 5a099a5..efcec01 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -1,14 +1,14 @@
-/* radio-trust.c - Trust FM Radio card driver for Linux 2.2
+/* radio-trust.c - Trust FM Radio card driver for Linux 2.2
* by Eric Lammerts <eric@scintilla.utwente.nl>
*
* Based on radio-aztech.c. Original notes:
*
- * Adapted to support the Video for Linux API by
+ * Adapted to support the Video for Linux API by
* Russell Kroll <rkroll@exploits.org>. Based on original tuner code by:
*
* Quay Ly
* Donald Song
- * Jason Lewis (jlewis@twilight.vtc.vsc.edu)
+ * Jason Lewis (jlewis@twilight.vtc.vsc.edu)
* Scott McGrath (smcgrath@twilight.vtc.vsc.edu)
* William McGrath (wmcgrath@twilight.vtc.vsc.edu)
*
@@ -30,7 +30,7 @@
#define CONFIG_RADIO_TRUST_PORT -1
#endif
-static int io = CONFIG_RADIO_TRUST_PORT;
+static int io = CONFIG_RADIO_TRUST_PORT;
static int radio_nr = -1;
static int ioval = 0xf;
static __u16 curvol;
@@ -135,7 +135,7 @@
static int tr_getsigstr(void)
{
int i, v;
-
+
for(i = 0, v = 0; i < 100; i++) v |= inb(io);
return (v & 1)? 0 : 0xffff;
}
@@ -175,7 +175,7 @@
{
struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
+ if(v->tuner) /* Only 1 tuner */
return -EINVAL;
v->rangelow = 87500 * 16;
@@ -211,28 +211,28 @@
return 0;
}
case VIDIOCGAUDIO:
- {
+ {
struct video_audio *v = arg;
memset(v,0, sizeof(*v));
v->flags = VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME |
- VIDEO_AUDIO_BASS | VIDEO_AUDIO_TREBLE;
+ VIDEO_AUDIO_BASS | VIDEO_AUDIO_TREBLE;
v->mode = curstereo? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
v->volume = curvol * 2048;
v->step = 2048;
v->bass = curbass * 4370;
v->treble = curtreble * 4370;
-
+
strcpy(v->name, "Trust FM Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO:
{
struct video_audio *v = arg;
- if(v->audio)
+ if(v->audio)
return -EINVAL;
- tr_setvol(v->volume);
+ tr_setvol(v->volume);
tr_setbass(v->bass);
tr_settreble(v->treble);
tr_setstereo(v->mode & VIDEO_SOUND_STEREO);
@@ -292,7 +292,7 @@
write_i2c(2, TDA7318_ADDR, 0xe0); /* speaker att. RR = 0 dB */
write_i2c(2, TDA7318_ADDR, 0x40); /* stereo 1 input, gain = 18.75 dB */
- tr_setvol(0x8000);
+ tr_setvol(0x8000);
tr_setbass(0x8000);
tr_settreble(0x8000);
tr_setstereo(1);
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index e509558..e424099 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -361,7 +361,7 @@
#ifdef CONFIG_RADIO_TYPHOON_PROC_FS
if (!create_proc_info_entry("driver/radio-typhoon", 0, NULL,
- typhoon_get_info))
+ typhoon_get_info))
printk(KERN_ERR "radio-typhoon: registering /proc/driver/radio-typhoon failed\n");
#endif
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index 7bf1a42..8aceea0 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -1,7 +1,7 @@
/* zoltrix radio plus driver for Linux radio support
* (c) 1998 C. van Schaik <carl@leg.uct.ac.za>
*
- * BUGS
+ * BUGS
* Due to the inconsistency in reading from the signal flags
* it is difficult to get an accurate tuned signal.
*
@@ -14,7 +14,7 @@
*
* 1999-05-06 - (C. van Schaik)
* - Make signal strength and stereo scans
- * kinder to cpu while in delay
+ * kinder to cpu while in delay
* 1999-01-05 - (C. van Schaik)
* - Changed tuning to 1/160Mhz accuracy
* - Added stereo support
@@ -105,7 +105,7 @@
i = 45;
mutex_lock(&dev->lock);
-
+
outb(0, io);
outb(0, io);
inb(io + 3); /* Zoltrix needs to be read to confirm */
@@ -139,8 +139,8 @@
udelay(1000);
inb(io+2);
- udelay(1000);
-
+ udelay(1000);
+
if (dev->muted)
{
outb(0, io);
@@ -148,12 +148,12 @@
inb(io + 3);
udelay(1000);
}
-
+
mutex_unlock(&dev->lock);
-
+
if(!dev->muted)
{
- zol_setvol(dev, dev->curvol);
+ zol_setvol(dev, dev->curvol);
}
return 0;
}
@@ -174,14 +174,14 @@
b = inb(io);
mutex_unlock(&dev->lock);
-
+
if (a != b)
return (0);
- if ((a == 0xcf) || (a == 0xdf) /* I found this out by playing */
+ if ((a == 0xcf) || (a == 0xdf) /* I found this out by playing */
|| (a == 0xef)) /* with a binary scanner on the card io */
return (1);
- return (0);
+ return (0);
}
static int zol_is_stereo (struct zol_device *dev)
@@ -189,7 +189,7 @@
int x1, x2;
mutex_lock(&dev->lock);
-
+
outb(0x00, io);
outb(dev->curvol, io);
msleep(20);
@@ -199,7 +199,7 @@
x2 = inb(io);
mutex_unlock(&dev->lock);
-
+
if ((x1 == x2) && (x1 == 0xcf))
return 1;
return 0;
@@ -226,7 +226,7 @@
case VIDIOCGTUNER:
{
struct video_tuner *v = arg;
- if (v->tuner)
+ if (v->tuner)
return -EINVAL;
strcpy(v->name, "FM");
v->rangelow = (int) (88.0 * 16000);
@@ -351,7 +351,7 @@
printk(KERN_INFO "Zoltrix Radio Plus card driver.\n");
mutex_init(&zoltrix_unit.lock);
-
+
/* mute card - prevents noisy bootups */
/* this ensures that the volume is all the way down */
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 85d84e8..b8d4913 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -67,10 +67,10 @@
static unsigned short colorspace_conv;
module_param(colorspace_conv, ushort, 0444);
MODULE_PARM_DESC(colorspace_conv,
- " Colorspace conversion:"
- "\n 0 = disable, 1 = enable"
- "\n Default value is 0"
- );
+ " Colorspace conversion:"
+ "\n 0 = disable, 1 = enable"
+ "\n Default value is 0"
+ );
#define ABOUT "V4L-Driver for Vision CPiA based cameras"