ASoC: wm8994: Handle LRCLK inversion for WM8958 and WM1811A
On WM8958 and WM1811A separate control of the LRCLK inversion bit is
available for the DAC and ADC LRCLKs which for compatibility reasons is
done in a new register bit.
Since writes to each scheme have no effect on parts using the other just
always write to both for simplicity.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Samreen Nilofer <samreen.nilofer@intel.com>
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 303d755..f1c54af 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -2574,17 +2574,24 @@
struct wm8994 *control = wm8994->wm8994;
int ms_reg;
int aif1_reg;
+ int dac_reg;
+ int adc_reg;
int ms = 0;
int aif1 = 0;
+ int lrclk = 0;
switch (dai->id) {
case 1:
ms_reg = WM8994_AIF1_MASTER_SLAVE;
aif1_reg = WM8994_AIF1_CONTROL_1;
+ dac_reg = WM8994_AIF1DAC_LRCLK;
+ adc_reg = WM8994_AIF1ADC_LRCLK;
break;
case 2:
ms_reg = WM8994_AIF2_MASTER_SLAVE;
aif1_reg = WM8994_AIF2_CONTROL_1;
+ dac_reg = WM8994_AIF1DAC_LRCLK;
+ adc_reg = WM8994_AIF1ADC_LRCLK;
break;
default:
return -EINVAL;
@@ -2603,6 +2610,7 @@
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_B:
aif1 |= WM8994_AIF1_LRCLK_INV;
+ lrclk |= WM8958_AIF1_LRCLK_INV;
case SND_SOC_DAIFMT_DSP_A:
aif1 |= 0x18;
break;
@@ -2641,12 +2649,14 @@
break;
case SND_SOC_DAIFMT_IB_IF:
aif1 |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV;
+ lrclk |= WM8958_AIF1_LRCLK_INV;
break;
case SND_SOC_DAIFMT_IB_NF:
aif1 |= WM8994_AIF1_BCLK_INV;
break;
case SND_SOC_DAIFMT_NB_IF:
aif1 |= WM8994_AIF1_LRCLK_INV;
+ lrclk |= WM8958_AIF1_LRCLK_INV;
break;
default:
return -EINVAL;
@@ -2677,6 +2687,10 @@
aif1);
snd_soc_update_bits(codec, ms_reg, WM8994_AIF1_MSTR,
ms);
+ snd_soc_update_bits(codec, dac_reg,
+ WM8958_AIF1_LRCLK_INV, lrclk);
+ snd_soc_update_bits(codec, adc_reg,
+ WM8958_AIF1_LRCLK_INV, lrclk);
return 0;
}