USB: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index d710042..160e1926 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -191,7 +191,7 @@
if (rc < 0)
err("Change port settings failed (error = %d)", rc);
info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
- __FUNCTION__,
+ __func__,
settings->pktlen,
settings->baudrate, settings->databits,
settings->unknown1, settings->unknown2);
@@ -222,7 +222,7 @@
__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1};
__u16 status;
- info("%s - sending SIO Poll request", __FUNCTION__);
+ info("%s - sending SIO Poll request", __func__);
rc = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
KL5KUSB105A_SIO_POLL,
@@ -237,7 +237,7 @@
else {
status = le16_to_cpu(*(u16 *)status_buf);
- info("%s - read status %x %x", __FUNCTION__,
+ info("%s - read status %x %x", __func__,
status_buf[0], status_buf[1]);
*line_state_p = klsi_105_status2linestate(status);
@@ -265,7 +265,7 @@
priv = kmalloc(sizeof(struct klsi_105_private),
GFP_KERNEL);
if (!priv) {
- dbg("%skmalloc for klsi_105_private failed.", __FUNCTION__);
+ dbg("%skmalloc for klsi_105_private failed.", __func__);
i--;
goto err_cleanup;
}
@@ -295,7 +295,7 @@
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s - out of memory for urb buffers.", __FUNCTION__);
+ err("%s - out of memory for urb buffers.", __func__);
goto err_cleanup;
}
}
@@ -325,7 +325,7 @@
{
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
@@ -370,7 +370,7 @@
struct klsi_105_port_settings cfg;
unsigned long flags;
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
/* force low_latency on so that our tty_push actually forces
* the data through
@@ -416,7 +416,7 @@
rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (rc) {
- err("%s - failed submitting read urb, error %d", __FUNCTION__, rc);
+ err("%s - failed submitting read urb, error %d", __func__, rc);
retval = rc;
goto exit;
}
@@ -434,14 +434,14 @@
err("Enabling read failed (error = %d)", rc);
retval = rc;
} else
- dbg("%s - enabled reading", __FUNCTION__);
+ dbg("%s - enabled reading", __func__);
rc = klsi_105_get_line_state(port, &line_state);
if (rc >= 0) {
spin_lock_irqsave (&priv->lock, flags);
priv->line_state = line_state;
spin_unlock_irqrestore (&priv->lock, flags);
- dbg("%s - read line state 0x%lx", __FUNCTION__, line_state);
+ dbg("%s - read line state 0x%lx", __func__, line_state);
retval = 0;
} else
retval = rc;
@@ -456,7 +456,7 @@
struct klsi_105_private *priv = usb_get_serial_port_data(port);
int rc;
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected) {
@@ -499,7 +499,7 @@
int result, size;
int bytes_sent=0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
while (count > 0) {
/* try to find a free urb (write 0 bytes if none) */
@@ -511,21 +511,21 @@
for (i=0; i<NUM_URBS; i++) {
if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
urb = priv->write_urb_pool[i];
- dbg("%s - using pool URB %d", __FUNCTION__, i);
+ dbg("%s - using pool URB %d", __func__, i);
break;
}
}
spin_unlock_irqrestore (&priv->lock, flags);
if (urb==NULL) {
- dbg("%s - no more free urbs", __FUNCTION__);
+ dbg("%s - no more free urbs", __func__);
goto exit;
}
if (urb->transfer_buffer == NULL) {
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
- err("%s - no more kernel memory...", __FUNCTION__);
+ err("%s - no more kernel memory...", __func__);
goto exit;
}
}
@@ -551,7 +551,7 @@
/* send the data out the bulk port */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting write urb, error %d", __func__, result);
goto exit;
}
buf += size;
@@ -570,10 +570,10 @@
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
+ dbg("%s - nonzero write bulk status received: %d", __func__,
status);
return;
}
@@ -600,7 +600,7 @@
spin_unlock_irqrestore (&priv->lock, flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return (chars);
}
@@ -620,7 +620,7 @@
spin_unlock_irqrestore (&priv->lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return (room);
}
@@ -635,11 +635,11 @@
int rc;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* The urb might have been killed. */
if (status) {
- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__,
+ dbg("%s - nonzero read bulk status received: %d", __func__,
status);
return;
}
@@ -649,12 +649,12 @@
*/
if (urb->actual_length == 0) {
/* empty urbs seem to happen, we ignore them */
- /* dbg("%s - emtpy URB", __FUNCTION__); */
+ /* dbg("%s - emtpy URB", __func__); */
;
} else if (urb->actual_length <= 2) {
- dbg("%s - size %d URB not understood", __FUNCTION__,
+ dbg("%s - size %d URB not understood", __func__,
urb->actual_length);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
} else {
int bytes_sent = ((__u8 *) data)[0] +
@@ -666,12 +666,12 @@
* intermixed tty_flip_buffer_push()s
* FIXME
*/
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
if (bytes_sent + 2 > urb->actual_length) {
dbg("%s - trying to read more data than available"
- " (%d vs. %d)", __FUNCTION__,
+ " (%d vs. %d)", __func__,
bytes_sent+2, urb->actual_length);
/* cap at implied limit */
bytes_sent = urb->actual_length - 2;
@@ -694,7 +694,7 @@
port);
rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (rc)
- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, rc);
+ err("%s - failed resubmitting read urb, error %d", __func__, rc);
} /* klsi_105_read_bulk_callback */
@@ -718,7 +718,7 @@
if( (cflag & CBAUD) != (old_cflag & CBAUD) ) {
/* reassert DTR and (maybe) RTS on transition from B0 */
if( (old_cflag & CBAUD) == B0 ) {
- dbg("%s: baud was B0", __FUNCTION__);
+ dbg("%s: baud was B0", __func__);
#if 0
priv->control_state |= TIOCM_DTR;
/* don't set RTS if using hardware flow control */
@@ -764,7 +764,7 @@
break;
}
if ((cflag & CBAUD) == B0 ) {
- dbg("%s: baud is B0", __FUNCTION__);
+ dbg("%s: baud is B0", __func__);
/* Drop RTS and DTR */
/* maybe this should be simulated by sending read
* disable and read enable messages?
@@ -781,11 +781,11 @@
/* set the number of data bits */
switch (cflag & CSIZE) {
case CS5:
- dbg("%s - 5 bits/byte not supported", __FUNCTION__);
+ dbg("%s - 5 bits/byte not supported", __func__);
spin_unlock_irqrestore (&priv->lock, flags);
return ;
case CS6:
- dbg("%s - 6 bits/byte not supported", __FUNCTION__);
+ dbg("%s - 6 bits/byte not supported", __func__);
spin_unlock_irqrestore (&priv->lock, flags);
return ;
case CS7:
@@ -859,7 +859,7 @@
struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
unsigned char lcr = priv->last_lcr;
- dbg("%sstate=%d", __FUNCTION__, break_state);
+ dbg("%sstate=%d", __func__, break_state);
if (break_state)
lcr |= MCT_U232_SET_BREAK;
@@ -874,7 +874,7 @@
unsigned long flags;
int rc;
unsigned long line_state;
- dbg("%s - request, just guessing", __FUNCTION__);
+ dbg("%s - request, just guessing", __func__);
rc = klsi_105_get_line_state(port, &line_state);
if (rc < 0) {
@@ -886,7 +886,7 @@
spin_lock_irqsave (&priv->lock, flags);
priv->line_state = line_state;
spin_unlock_irqrestore (&priv->lock, flags);
- dbg("%s - read line state 0x%lx", __FUNCTION__, line_state);
+ dbg("%s - read line state 0x%lx", __func__, line_state);
return (int)line_state;
}
@@ -895,7 +895,7 @@
{
int retval = -EINVAL;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* if this ever gets implemented, it should be done something like this:
struct usb_serial *serial = port->serial;
@@ -921,7 +921,7 @@
static void klsi_105_throttle (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->read_urb);
}
@@ -929,12 +929,12 @@
{
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed submitting read urb, error %d", __FUNCTION__,
+ err("%s - failed submitting read urb, error %d", __func__,
result);
}