| /* |
| * Driver for the NXP ISP1760 chip |
| * |
| * However, the code might contain some bugs. What doesn't work for sure is: |
| * - ISO |
| * - OTG |
| e The interrupt line is configured as active low, level. |
| * |
| * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de> |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/list.h> |
| #include <linux/usb.h> |
| #include <linux/debugfs.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| #include <asm/unaligned.h> |
| |
| #include "../core/hcd.h" |
| #include "isp1760-hcd.h" |
| |
| static struct kmem_cache *qtd_cachep; |
| static struct kmem_cache *qh_cachep; |
| |
| struct isp1760_hcd { |
| u32 hcs_params; |
| spinlock_t lock; |
| struct inter_packet_info atl_ints[32]; |
| struct inter_packet_info int_ints[32]; |
| struct memory_chunk memory_pool[BLOCKS]; |
| |
| /* periodic schedule support */ |
| #define DEFAULT_I_TDPS 1024 |
| unsigned periodic_size; |
| unsigned i_thresh; |
| unsigned long reset_done; |
| unsigned long next_statechange; |
| }; |
| |
| static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd) |
| { |
| return (struct isp1760_hcd *) (hcd->hcd_priv); |
| } |
| static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv) |
| { |
| return container_of((void *) priv, struct usb_hcd, hcd_priv); |
| } |
| |
| /* Section 2.2 Host Controller Capability Registers */ |
| #define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ |
| #define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ |
| #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ |
| #define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ |
| #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ |
| #define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ |
| #define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ |
| |
| /* Section 2.3 Host Controller Operational Registers */ |
| #define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ |
| #define CMD_RESET (1<<1) /* reset HC not bus */ |
| #define CMD_RUN (1<<0) /* start/stop HC */ |
| #define STS_PCD (1<<2) /* port change detect */ |
| #define FLAG_CF (1<<0) /* true: we'll support "high speed" */ |
| |
| #define PORT_OWNER (1<<13) /* true: companion hc owns this port */ |
| #define PORT_POWER (1<<12) /* true: has power (see PPC) */ |
| #define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10)) /* USB 1.1 device */ |
| #define PORT_RESET (1<<8) /* reset port */ |
| #define PORT_SUSPEND (1<<7) /* suspend port */ |
| #define PORT_RESUME (1<<6) /* resume it */ |
| #define PORT_PE (1<<2) /* port enable */ |
| #define PORT_CSC (1<<1) /* connect status change */ |
| #define PORT_CONNECT (1<<0) /* device connected */ |
| #define PORT_RWC_BITS (PORT_CSC) |
| |
| struct isp1760_qtd { |
| struct isp1760_qtd *hw_next; |
| u8 packet_type; |
| u8 toggle; |
| |
| void *data_buffer; |
| /* the rest is HCD-private */ |
| struct list_head qtd_list; |
| struct urb *urb; |
| size_t length; |
| |
| /* isp special*/ |
| u32 status; |
| #define URB_COMPLETE_NOTIFY (1 << 0) |
| #define URB_ENQUEUED (1 << 1) |
| #define URB_TYPE_ATL (1 << 2) |
| #define URB_TYPE_INT (1 << 3) |
| }; |
| |
| struct isp1760_qh { |
| /* first part defined by EHCI spec */ |
| struct list_head qtd_list; |
| struct isp1760_hcd *priv; |
| |
| /* periodic schedule info */ |
| unsigned short period; /* polling interval */ |
| struct usb_device *dev; |
| |
| u32 toggle; |
| u32 ping; |
| }; |
| |
| #define ehci_port_speed(priv, portsc) (1 << USB_PORT_FEAT_HIGHSPEED) |
| |
| static unsigned int isp1760_readl(__u32 __iomem *regs) |
| { |
| return readl(regs); |
| } |
| |
| static void isp1760_writel(const unsigned int val, __u32 __iomem *regs) |
| { |
| writel(val, regs); |
| } |
| |
| /* |
| * The next two copy via MMIO data to/from the device. memcpy_{to|from}io() |
| * doesn't quite work because some people have to enforce 32-bit access |
| */ |
| static void priv_read_copy(struct isp1760_hcd *priv, u32 *src, |
| __u32 __iomem *dst, u32 offset, u32 len) |
| { |
| struct usb_hcd *hcd = priv_to_hcd(priv); |
| u32 val; |
| u8 *buff8; |
| |
| if (!src) { |
| printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len); |
| return; |
| } |
| isp1760_writel(offset, hcd->regs + HC_MEMORY_REG); |
| /* XXX |
| * 90nsec delay, the spec says something how this could be avoided. |
| */ |
| mdelay(1); |
| |
| while (len >= 4) { |
| *src = __raw_readl(dst); |
| len -= 4; |
| src++; |
| dst++; |
| } |
| |
| if (!len) |
| return; |
| |
| /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully |
| * allocated. |
| */ |
| val = isp1760_readl(dst); |
| |
| buff8 = (u8 *)src; |
| while (len) { |
| |
| *buff8 = val; |
| val >>= 8; |
| len--; |
| buff8++; |
| } |
| } |
| |
| static void priv_write_copy(const struct isp1760_hcd *priv, const u32 *src, |
| __u32 __iomem *dst, u32 len) |
| { |
| while (len >= 4) { |
| __raw_writel(*src, dst); |
| len -= 4; |
| src++; |
| dst++; |
| } |
| |
| if (!len) |
| return; |
| /* in case we have 3, 2 or 1 by left. The buffer is allocated and the |
| * extra bytes should not be read by the HW |
| */ |
| |
| __raw_writel(*src, dst); |
| } |
| |
| /* memory management of the 60kb on the chip from 0x1000 to 0xffff */ |
| static void init_memory(struct isp1760_hcd *priv) |
| { |
| int i; |
| u32 payload; |
| |
| payload = 0x1000; |
| for (i = 0; i < BLOCK_1_NUM; i++) { |
| priv->memory_pool[i].start = payload; |
| priv->memory_pool[i].size = BLOCK_1_SIZE; |
| priv->memory_pool[i].free = 1; |
| payload += priv->memory_pool[i].size; |
| } |
| |
| |
| for (i = BLOCK_1_NUM; i < BLOCK_1_NUM + BLOCK_2_NUM; i++) { |
| priv->memory_pool[i].start = payload; |
| priv->memory_pool[i].size = BLOCK_2_SIZE; |
| priv->memory_pool[i].free = 1; |
| payload += priv->memory_pool[i].size; |
| } |
| |
| |
| for (i = BLOCK_1_NUM + BLOCK_2_NUM; i < BLOCKS; i++) { |
| priv->memory_pool[i].start = payload; |
| priv->memory_pool[i].size = BLOCK_3_SIZE; |
| priv->memory_pool[i].free = 1; |
| payload += priv->memory_pool[i].size; |
| } |
| |
| BUG_ON(payload - priv->memory_pool[i - 1].size > PAYLOAD_SIZE); |
| } |
| |
| static u32 alloc_mem(struct isp1760_hcd *priv, u32 size) |
| { |
| int i; |
| |
| if (!size) |
| return ISP1760_NULL_POINTER; |
| |
| for (i = 0; i < BLOCKS; i++) { |
| if (priv->memory_pool[i].size >= size && |
| priv->memory_pool[i].free) { |
| |
| priv->memory_pool[i].free = 0; |
| return priv->memory_pool[i].start; |
| } |
| } |
| |
| printk(KERN_ERR "ISP1760 MEM: can not allocate %d bytes of memory\n", |
| size); |
| printk(KERN_ERR "Current memory map:\n"); |
| for (i = 0; i < BLOCKS; i++) { |
| printk(KERN_ERR "Pool %2d size %4d status: %d\n", |
| i, priv->memory_pool[i].size, |
| priv->memory_pool[i].free); |
| } |
| /* XXX maybe -ENOMEM could be possible */ |
| BUG(); |
| return 0; |
| } |
| |
| static void free_mem(struct isp1760_hcd *priv, u32 mem) |
| { |
| int i; |
| |
| if (mem == ISP1760_NULL_POINTER) |
| return; |
| |
| for (i = 0; i < BLOCKS; i++) { |
| if (priv->memory_pool[i].start == mem) { |
| |
| BUG_ON(priv->memory_pool[i].free); |
| |
| priv->memory_pool[i].free = 1; |
| return ; |
| } |
| } |
| |
| printk(KERN_ERR "Trying to free not-here-allocated memory :%08x\n", |
| mem); |
| BUG(); |
| } |
| |
| static void isp1760_init_regs(struct usb_hcd *hcd) |
| { |
| isp1760_writel(0, hcd->regs + HC_BUFFER_STATUS_REG); |
| isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + |
| HC_ATL_PTD_SKIPMAP_REG); |
| isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + |
| HC_INT_PTD_SKIPMAP_REG); |
| isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + |
| HC_ISO_PTD_SKIPMAP_REG); |
| |
| isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + |
| HC_ATL_PTD_DONEMAP_REG); |
| isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + |
| HC_INT_PTD_DONEMAP_REG); |
| isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + |
| HC_ISO_PTD_DONEMAP_REG); |
| } |
| |
| static int handshake(struct isp1760_hcd *priv, void __iomem *ptr, |
| u32 mask, u32 done, int usec) |
| { |
| u32 result; |
| |
| do { |
| result = isp1760_readl(ptr); |
| if (result == ~0) |
| return -ENODEV; |
| result &= mask; |
| if (result == done) |
| return 0; |
| udelay(1); |
| usec--; |
| } while (usec > 0); |
| return -ETIMEDOUT; |
| } |
| |
| /* reset a non-running (STS_HALT == 1) controller */ |
| static int ehci_reset(struct isp1760_hcd *priv) |
| { |
| int retval; |
| struct usb_hcd *hcd = priv_to_hcd(priv); |
| u32 command = isp1760_readl(hcd->regs + HC_USBCMD); |
| |
| command |= CMD_RESET; |
| isp1760_writel(command, hcd->regs + HC_USBCMD); |
| hcd->state = HC_STATE_HALT; |
| priv->next_statechange = jiffies; |
| retval = handshake(priv, hcd->regs + HC_USBCMD, |
| CMD_RESET, 0, 250 * 1000); |
| return retval; |
| } |
| |
| static void qh_destroy(struct isp1760_qh *qh) |
| { |
| BUG_ON(!list_empty(&qh->qtd_list)); |
| kmem_cache_free(qh_cachep, qh); |
| } |
| |
| static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv, |
| gfp_t flags) |
| { |
| struct isp1760_qh *qh; |
| |
| qh = kmem_cache_zalloc(qh_cachep, flags); |
| if (!qh) |
| return qh; |
| |
| INIT_LIST_HEAD(&qh->qtd_list); |
| qh->priv = priv; |
| return qh; |
| } |
| |
| /* magic numbers that can affect system performance */ |
| #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ |
| #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ |
| #define EHCI_TUNE_RL_TT 0 |
| #define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ |
| #define EHCI_TUNE_MULT_TT 1 |
| #define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ |
| |
| /* one-time init, only for memory state */ |
| static int priv_init(struct usb_hcd *hcd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| u32 hcc_params; |
| |
| spin_lock_init(&priv->lock); |
| |
| /* |
| * hw default: 1K periodic list heads, one per frame. |
| * periodic_size can shrink by USBCMD update if hcc_params allows. |
| */ |
| priv->periodic_size = DEFAULT_I_TDPS; |
| |
| /* controllers may cache some of the periodic schedule ... */ |
| hcc_params = isp1760_readl(hcd->regs + HC_HCCPARAMS); |
| /* full frame cache */ |
| if (HCC_ISOC_CACHE(hcc_params)) |
| priv->i_thresh = 8; |
| else /* N microframes cached */ |
| priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); |
| |
| return 0; |
| } |
| |
| static int isp1760_hc_setup(struct usb_hcd *hcd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| int result; |
| u32 scratch; |
| |
| isp1760_writel(0xdeadbabe, hcd->regs + HC_SCRATCH_REG); |
| scratch = isp1760_readl(hcd->regs + HC_SCRATCH_REG); |
| if (scratch != 0xdeadbabe) { |
| printk(KERN_ERR "ISP1760: Scratch test failed.\n"); |
| return -ENODEV; |
| } |
| |
| /* pre reset */ |
| isp1760_init_regs(hcd); |
| |
| /* reset */ |
| isp1760_writel(SW_RESET_RESET_ALL, hcd->regs + HC_RESET_REG); |
| mdelay(100); |
| |
| isp1760_writel(SW_RESET_RESET_HC, hcd->regs + HC_RESET_REG); |
| mdelay(100); |
| |
| result = ehci_reset(priv); |
| if (result) |
| return result; |
| |
| /* Step 11 passed */ |
| |
| isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_REG); |
| isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_ENABLE); |
| |
| /* ATL reset */ |
| scratch = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL); |
| isp1760_writel(scratch | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL); |
| mdelay(10); |
| isp1760_writel(scratch, hcd->regs + HC_HW_MODE_CTRL); |
| |
| isp1760_writel(PORT1_POWER | PORT1_INIT2, hcd->regs + HC_PORT1_CTRL); |
| mdelay(10); |
| |
| priv->hcs_params = isp1760_readl(hcd->regs + HC_HCSPARAMS); |
| |
| return priv_init(hcd); |
| } |
| |
| static void isp1760_init_maps(struct usb_hcd *hcd) |
| { |
| /*set last maps, for iso its only 1, else 32 tds bitmap*/ |
| isp1760_writel(0x80000000, hcd->regs + HC_ATL_PTD_LASTPTD_REG); |
| isp1760_writel(0x80000000, hcd->regs + HC_INT_PTD_LASTPTD_REG); |
| isp1760_writel(0x00000001, hcd->regs + HC_ISO_PTD_LASTPTD_REG); |
| } |
| |
| static void isp1760_enable_interrupts(struct usb_hcd *hcd) |
| { |
| isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_AND_REG); |
| isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_OR_REG); |
| isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_AND_REG); |
| isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_OR_REG); |
| isp1760_writel(0, hcd->regs + HC_ISO_IRQ_MASK_AND_REG); |
| isp1760_writel(0xffffffff, hcd->regs + HC_ISO_IRQ_MASK_OR_REG); |
| /* step 23 passed */ |
| } |
| |
| static int isp1760_run(struct usb_hcd *hcd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| int retval; |
| u32 temp; |
| u32 command; |
| u32 chipid; |
| |
| hcd->uses_new_polling = 1; |
| hcd->poll_rh = 0; |
| |
| hcd->state = HC_STATE_RUNNING; |
| isp1760_enable_interrupts(hcd); |
| temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL); |
| temp |= FINAL_HW_CONFIG; |
| isp1760_writel(temp, hcd->regs + HC_HW_MODE_CTRL); |
| |
| command = isp1760_readl(hcd->regs + HC_USBCMD); |
| command &= ~(CMD_LRESET|CMD_RESET); |
| command |= CMD_RUN; |
| isp1760_writel(command, hcd->regs + HC_USBCMD); |
| |
| retval = handshake(priv, hcd->regs + HC_USBCMD, CMD_RUN, CMD_RUN, |
| 250 * 1000); |
| if (retval) |
| return retval; |
| |
| /* |
| * XXX |
| * Spec says to write FLAG_CF as last config action, priv code grabs |
| * the semaphore while doing so. |
| */ |
| down_write(&ehci_cf_port_reset_rwsem); |
| isp1760_writel(FLAG_CF, hcd->regs + HC_CONFIGFLAG); |
| |
| retval = handshake(priv, hcd->regs + HC_CONFIGFLAG, FLAG_CF, FLAG_CF, |
| 250 * 1000); |
| up_write(&ehci_cf_port_reset_rwsem); |
| if (retval) |
| return retval; |
| |
| chipid = isp1760_readl(hcd->regs + HC_CHIP_ID_REG); |
| isp1760_info(priv, "USB ISP %04x HW rev. %d started\n", chipid & 0xffff, |
| chipid >> 16); |
| |
| /* PTD Register Init Part 2, Step 28 */ |
| /* enable INTs */ |
| isp1760_init_maps(hcd); |
| |
| /* GRR this is run-once init(), being done every time the HC starts. |
| * So long as they're part of class devices, we can't do it init() |
| * since the class device isn't created that early. |
| */ |
| return 0; |
| } |
| |
| static u32 base_to_chip(u32 base) |
| { |
| return ((base - 0x400) >> 3); |
| } |
| |
| static void transform_into_atl(struct isp1760_hcd *priv, struct isp1760_qh *qh, |
| struct isp1760_qtd *qtd, struct urb *urb, |
| u32 payload, struct ptd *ptd) |
| { |
| u32 dw0; |
| u32 dw1; |
| u32 dw2; |
| u32 dw3; |
| u32 maxpacket; |
| u32 multi; |
| u32 pid_code; |
| u32 rl = RL_COUNTER; |
| u32 nak = NAK_COUNTER; |
| |
| /* according to 3.6.2, max packet len can not be > 0x400 */ |
| maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); |
| multi = 1 + ((maxpacket >> 11) & 0x3); |
| maxpacket &= 0x7ff; |
| |
| /* DW0 */ |
| dw0 = PTD_VALID; |
| dw0 |= PTD_LENGTH(qtd->length); |
| dw0 |= PTD_MAXPACKET(maxpacket); |
| dw0 |= PTD_ENDPOINT(usb_pipeendpoint(urb->pipe)); |
| dw1 = usb_pipeendpoint(urb->pipe) >> 1; |
| |
| /* DW1 */ |
| dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(urb->pipe)); |
| |
| pid_code = qtd->packet_type; |
| dw1 |= PTD_PID_TOKEN(pid_code); |
| |
| if (usb_pipebulk(urb->pipe)) |
| dw1 |= PTD_TRANS_BULK; |
| else if (usb_pipeint(urb->pipe)) |
| dw1 |= PTD_TRANS_INT; |
| |
| if (urb->dev->speed != USB_SPEED_HIGH) { |
| /* split transaction */ |
| |
| dw1 |= PTD_TRANS_SPLIT; |
| if (urb->dev->speed == USB_SPEED_LOW) |
| dw1 |= PTD_SE_USB_LOSPEED; |
| |
| dw1 |= PTD_PORT_NUM(urb->dev->ttport); |
| dw1 |= PTD_HUB_NUM(urb->dev->tt->hub->devnum); |
| |
| /* SE bit for Split INT transfers */ |
| if (usb_pipeint(urb->pipe) && |
| (urb->dev->speed == USB_SPEED_LOW)) |
| dw1 |= 2 << 16; |
| |
| dw3 = 0; |
| rl = 0; |
| nak = 0; |
| } else { |
| dw0 |= PTD_MULTI(multi); |
| if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) |
| dw3 = qh->ping; |
| else |
| dw3 = 0; |
| } |
| /* DW2 */ |
| dw2 = 0; |
| dw2 |= PTD_DATA_START_ADDR(base_to_chip(payload)); |
| dw2 |= PTD_RL_CNT(rl); |
| dw3 |= PTD_NAC_CNT(nak); |
| |
| /* DW3 */ |
| if (usb_pipecontrol(urb->pipe)) |
| dw3 |= PTD_DATA_TOGGLE(qtd->toggle); |
| else |
| dw3 |= qh->toggle; |
| |
| |
| dw3 |= PTD_ACTIVE; |
| /* Cerr */ |
| dw3 |= PTD_CERR(ERR_COUNTER); |
| |
| memset(ptd, 0, sizeof(*ptd)); |
| |
| ptd->dw0 = cpu_to_le32(dw0); |
| ptd->dw1 = cpu_to_le32(dw1); |
| ptd->dw2 = cpu_to_le32(dw2); |
| ptd->dw3 = cpu_to_le32(dw3); |
| } |
| |
| static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh, |
| struct isp1760_qtd *qtd, struct urb *urb, |
| u32 payload, struct ptd *ptd) |
| { |
| u32 maxpacket; |
| u32 multi; |
| u32 numberofusofs; |
| u32 i; |
| u32 usofmask, usof; |
| u32 period; |
| |
| maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); |
| multi = 1 + ((maxpacket >> 11) & 0x3); |
| maxpacket &= 0x7ff; |
| /* length of the data per uframe */ |
| maxpacket = multi * maxpacket; |
| |
| numberofusofs = urb->transfer_buffer_length / maxpacket; |
| if (urb->transfer_buffer_length % maxpacket) |
| numberofusofs += 1; |
| |
| usofmask = 1; |
| usof = 0; |
| for (i = 0; i < numberofusofs; i++) { |
| usof |= usofmask; |
| usofmask <<= 1; |
| } |
| |
| if (urb->dev->speed != USB_SPEED_HIGH) { |
| /* split */ |
| ptd->dw5 = __constant_cpu_to_le32(0x1c); |
| |
| if (qh->period >= 32) |
| period = qh->period / 2; |
| else |
| period = qh->period; |
| |
| } else { |
| |
| if (qh->period >= 8) |
| period = qh->period/8; |
| else |
| period = qh->period; |
| |
| if (period >= 32) |
| period = 16; |
| |
| if (qh->period >= 8) { |
| /* millisecond period */ |
| period = (period << 3); |
| } else { |
| /* usof based tranmsfers */ |
| /* minimum 4 usofs */ |
| usof = 0x11; |
| } |
| } |
| |
| ptd->dw2 |= cpu_to_le32(period); |
| ptd->dw4 = cpu_to_le32(usof); |
| } |
| |
| static void transform_into_int(struct isp1760_hcd *priv, struct isp1760_qh *qh, |
| struct isp1760_qtd *qtd, struct urb *urb, |
| u32 payload, struct ptd *ptd) |
| { |
| transform_into_atl(priv, qh, qtd, urb, payload, ptd); |
| transform_add_int(priv, qh, qtd, urb, payload, ptd); |
| } |
| |
| static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len, |
| u32 token) |
| { |
| int count; |
| |
| qtd->data_buffer = databuffer; |
| qtd->packet_type = GET_QTD_TOKEN_TYPE(token); |
| qtd->toggle = GET_DATA_TOGGLE(token); |
| |
| if (len > HC_ATL_PL_SIZE) |
| count = HC_ATL_PL_SIZE; |
| else |
| count = len; |
| |
| qtd->length = count; |
| return count; |
| } |
| |
| static int check_error(struct ptd *ptd) |
| { |
| int error = 0; |
| u32 dw3; |
| |
| dw3 = le32_to_cpu(ptd->dw3); |
| if (dw3 & DW3_HALT_BIT) |
| error = -EPIPE; |
| |
| if (dw3 & DW3_ERROR_BIT) { |
| printk(KERN_ERR "error bit is set in DW3\n"); |
| error = -EPIPE; |
| } |
| |
| if (dw3 & DW3_QTD_ACTIVE) { |
| printk(KERN_ERR "transfer active bit is set DW3\n"); |
| printk(KERN_ERR "nak counter: %d, rl: %d\n", (dw3 >> 19) & 0xf, |
| (le32_to_cpu(ptd->dw2) >> 25) & 0xf); |
| } |
| |
| return error; |
| } |
| |
| static void check_int_err_status(u32 dw4) |
| { |
| u32 i; |
| |
| dw4 >>= 8; |
| |
| for (i = 0; i < 8; i++) { |
| switch (dw4 & 0x7) { |
| case INT_UNDERRUN: |
| printk(KERN_ERR "ERROR: under run , %d\n", i); |
| break; |
| |
| case INT_EXACT: |
| printk(KERN_ERR "ERROR: transaction error, %d\n", i); |
| break; |
| |
| case INT_BABBLE: |
| printk(KERN_ERR "ERROR: babble error, %d\n", i); |
| break; |
| } |
| dw4 >>= 3; |
| } |
| } |
| |
| static void enqueue_one_qtd(struct isp1760_qtd *qtd, struct isp1760_hcd *priv, |
| u32 payload) |
| { |
| u32 token; |
| struct usb_hcd *hcd = priv_to_hcd(priv); |
| |
| token = qtd->packet_type; |
| |
| if (qtd->length && (qtd->length <= HC_ATL_PL_SIZE)) { |
| switch (token) { |
| case IN_PID: |
| break; |
| case OUT_PID: |
| case SETUP_PID: |
| priv_write_copy(priv, qtd->data_buffer, |
| hcd->regs + payload, |
| qtd->length); |
| } |
| } |
| } |
| |
| static void enqueue_one_atl_qtd(u32 atl_regs, u32 payload, |
| struct isp1760_hcd *priv, struct isp1760_qh *qh, |
| struct urb *urb, u32 slot, struct isp1760_qtd *qtd) |
| { |
| struct ptd ptd; |
| struct usb_hcd *hcd = priv_to_hcd(priv); |
| |
| transform_into_atl(priv, qh, qtd, urb, payload, &ptd); |
| priv_write_copy(priv, (u32 *)&ptd, hcd->regs + atl_regs, sizeof(ptd)); |
| enqueue_one_qtd(qtd, priv, payload); |
| |
| priv->atl_ints[slot].urb = urb; |
| priv->atl_ints[slot].qh = qh; |
| priv->atl_ints[slot].qtd = qtd; |
| priv->atl_ints[slot].data_buffer = qtd->data_buffer; |
| priv->atl_ints[slot].payload = payload; |
| qtd->status |= URB_ENQUEUED | URB_TYPE_ATL; |
| qtd->status |= slot << 16; |
| } |
| |
| static void enqueue_one_int_qtd(u32 int_regs, u32 payload, |
| struct isp1760_hcd *priv, struct isp1760_qh *qh, |
| struct urb *urb, u32 slot, struct isp1760_qtd *qtd) |
| { |
| struct ptd ptd; |
| struct usb_hcd *hcd = priv_to_hcd(priv); |
| |
| transform_into_int(priv, qh, qtd, urb, payload, &ptd); |
| priv_write_copy(priv, (u32 *)&ptd, hcd->regs + int_regs, sizeof(ptd)); |
| enqueue_one_qtd(qtd, priv, payload); |
| |
| priv->int_ints[slot].urb = urb; |
| priv->int_ints[slot].qh = qh; |
| priv->int_ints[slot].qtd = qtd; |
| priv->int_ints[slot].data_buffer = qtd->data_buffer; |
| priv->int_ints[slot].payload = payload; |
| qtd->status |= URB_ENQUEUED | URB_TYPE_INT; |
| qtd->status |= slot << 16; |
| } |
| |
| void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, |
| struct isp1760_qtd *qtd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| u32 skip_map, or_map; |
| u32 queue_entry; |
| u32 slot; |
| u32 atl_regs, payload; |
| u32 buffstatus; |
| |
| skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG); |
| |
| BUG_ON(!skip_map); |
| slot = __ffs(skip_map); |
| queue_entry = 1 << slot; |
| |
| atl_regs = ATL_REGS_OFFSET + slot * sizeof(struct ptd); |
| |
| payload = alloc_mem(priv, qtd->length); |
| |
| enqueue_one_atl_qtd(atl_regs, payload, priv, qh, qtd->urb, slot, qtd); |
| |
| or_map = isp1760_readl(hcd->regs + HC_ATL_IRQ_MASK_OR_REG); |
| or_map |= queue_entry; |
| isp1760_writel(or_map, hcd->regs + HC_ATL_IRQ_MASK_OR_REG); |
| |
| skip_map &= ~queue_entry; |
| isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG); |
| |
| buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG); |
| buffstatus |= ATL_BUFFER; |
| isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG); |
| } |
| |
| void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, |
| struct isp1760_qtd *qtd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| u32 skip_map, or_map; |
| u32 queue_entry; |
| u32 slot; |
| u32 int_regs, payload; |
| u32 buffstatus; |
| |
| skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG); |
| |
| BUG_ON(!skip_map); |
| slot = __ffs(skip_map); |
| queue_entry = 1 << slot; |
| |
| int_regs = INT_REGS_OFFSET + slot * sizeof(struct ptd); |
| |
| payload = alloc_mem(priv, qtd->length); |
| |
| enqueue_one_int_qtd(int_regs, payload, priv, qh, qtd->urb, slot, qtd); |
| |
| or_map = isp1760_readl(hcd->regs + HC_INT_IRQ_MASK_OR_REG); |
| or_map |= queue_entry; |
| isp1760_writel(or_map, hcd->regs + HC_INT_IRQ_MASK_OR_REG); |
| |
| skip_map &= ~queue_entry; |
| isp1760_writel(skip_map, hcd->regs + HC_INT_PTD_SKIPMAP_REG); |
| |
| buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG); |
| buffstatus |= INT_BUFFER; |
| isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG); |
| } |
| |
| static void isp1760_urb_done(struct isp1760_hcd *priv, struct urb *urb, int status) |
| __releases(priv->lock) |
| __acquires(priv->lock) |
| { |
| if (!urb->unlinked) { |
| if (status == -EINPROGRESS) |
| status = 0; |
| } |
| |
| /* complete() can reenter this HCD */ |
| usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); |
| spin_unlock(&priv->lock); |
| usb_hcd_giveback_urb(priv_to_hcd(priv), urb, status); |
| spin_lock(&priv->lock); |
| } |
| |
| static void isp1760_qtd_free(struct isp1760_qtd *qtd) |
| { |
| kmem_cache_free(qtd_cachep, qtd); |
| } |
| |
| static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd) |
| { |
| struct isp1760_qtd *tmp_qtd; |
| |
| tmp_qtd = qtd->hw_next; |
| list_del(&qtd->qtd_list); |
| isp1760_qtd_free(qtd); |
| return tmp_qtd; |
| } |
| |
| /* |
| * Remove this QTD from the QH list and free its memory. If this QTD |
| * isn't the last one than remove also his successor(s). |
| * Returns the QTD which is part of an new URB and should be enqueued. |
| */ |
| static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd) |
| { |
| struct isp1760_qtd *tmp_qtd; |
| int last_one; |
| |
| do { |
| tmp_qtd = qtd->hw_next; |
| last_one = qtd->status & URB_COMPLETE_NOTIFY; |
| list_del(&qtd->qtd_list); |
| isp1760_qtd_free(qtd); |
| qtd = tmp_qtd; |
| } while (!last_one && qtd); |
| |
| return qtd; |
| } |
| |
| static void do_atl_int(struct usb_hcd *usb_hcd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); |
| u32 done_map, skip_map; |
| struct ptd ptd; |
| struct urb *urb = NULL; |
| u32 atl_regs_base; |
| u32 atl_regs; |
| u32 queue_entry; |
| u32 payload; |
| u32 length; |
| u32 or_map; |
| u32 status = -EINVAL; |
| int error; |
| struct isp1760_qtd *qtd; |
| struct isp1760_qh *qh; |
| u32 rl; |
| u32 nakcount; |
| |
| done_map = isp1760_readl(usb_hcd->regs + |
| HC_ATL_PTD_DONEMAP_REG); |
| skip_map = isp1760_readl(usb_hcd->regs + |
| HC_ATL_PTD_SKIPMAP_REG); |
| |
| or_map = isp1760_readl(usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG); |
| or_map &= ~done_map; |
| isp1760_writel(or_map, usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG); |
| |
| atl_regs_base = ATL_REGS_OFFSET; |
| while (done_map) { |
| u32 dw1; |
| u32 dw2; |
| u32 dw3; |
| |
| status = 0; |
| |
| queue_entry = __ffs(done_map); |
| done_map &= ~(1 << queue_entry); |
| skip_map |= 1 << queue_entry; |
| |
| atl_regs = atl_regs_base + queue_entry * sizeof(struct ptd); |
| |
| urb = priv->atl_ints[queue_entry].urb; |
| qtd = priv->atl_ints[queue_entry].qtd; |
| qh = priv->atl_ints[queue_entry].qh; |
| payload = priv->atl_ints[queue_entry].payload; |
| |
| if (!qh) { |
| printk(KERN_ERR "qh is 0\n"); |
| continue; |
| } |
| priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs, |
| atl_regs, sizeof(ptd)); |
| |
| dw1 = le32_to_cpu(ptd.dw1); |
| dw2 = le32_to_cpu(ptd.dw2); |
| dw3 = le32_to_cpu(ptd.dw3); |
| rl = (dw2 >> 25) & 0x0f; |
| nakcount = (dw3 >> 19) & 0xf; |
| |
| /* Transfer Error, *but* active and no HALT -> reload */ |
| if ((dw3 & DW3_ERROR_BIT) && (dw3 & DW3_QTD_ACTIVE) && |
| !(dw3 & DW3_HALT_BIT)) { |
| |
| /* according to ppriv code, we have to |
| * reload this one if trasfered bytes != requested bytes |
| * else act like everything went smooth.. |
| * XXX This just doesn't feel right and hasn't |
| * triggered so far. |
| */ |
| |
| length = PTD_XFERRED_LENGTH(dw3); |
| printk(KERN_ERR "Should reload now.... transfered %d " |
| "of %zu\n", length, qtd->length); |
| BUG(); |
| } |
| |
| if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) { |
| u32 buffstatus; |
| |
| /* XXX |
| * NAKs are handled in HW by the chip. Usually if the |
| * device is not able to send data fast enough. |
| * This did not trigger for a long time now. |
| */ |
| printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: " |
| "%d of %zu done: %08x cur: %08x\n", qtd, |
| urb, qh, PTD_XFERRED_LENGTH(dw3), |
| qtd->length, done_map, |
| (1 << queue_entry)); |
| |
| /* RL counter = ERR counter */ |
| dw3 &= ~(0xf << 19); |
| dw3 |= rl << 19; |
| dw3 &= ~(3 << (55 - 32)); |
| dw3 |= ERR_COUNTER << (55 - 32); |
| |
| /* |
| * It is not needed to write skip map back because it |
| * is unchanged. Just make sure that this entry is |
| * unskipped once it gets written to the HW. |
| */ |
| skip_map &= ~(1 << queue_entry); |
| or_map = isp1760_readl(usb_hcd->regs + |
| HC_ATL_IRQ_MASK_OR_REG); |
| or_map |= 1 << queue_entry; |
| isp1760_writel(or_map, usb_hcd->regs + |
| HC_ATL_IRQ_MASK_OR_REG); |
| |
| ptd.dw3 = cpu_to_le32(dw3); |
| priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs + |
| atl_regs, sizeof(ptd)); |
| |
| ptd.dw0 |= __constant_cpu_to_le32(PTD_VALID); |
| priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs + |
| atl_regs, sizeof(ptd)); |
| |
| buffstatus = isp1760_readl(usb_hcd->regs + |
| HC_BUFFER_STATUS_REG); |
| buffstatus |= ATL_BUFFER; |
| isp1760_writel(buffstatus, usb_hcd->regs + |
| HC_BUFFER_STATUS_REG); |
| continue; |
| } |
| |
| error = check_error(&ptd); |
| if (error) { |
| status = error; |
| priv->atl_ints[queue_entry].qh->toggle = 0; |
| priv->atl_ints[queue_entry].qh->ping = 0; |
| urb->status = -EPIPE; |
| |
| #if 0 |
| printk(KERN_ERR "Error in %s().\n", __func__); |
| printk(KERN_ERR "IN dw0: %08x dw1: %08x dw2: %08x " |
| "dw3: %08x dw4: %08x dw5: %08x dw6: " |
| "%08x dw7: %08x\n", |
| ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3, |
| ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7); |
| #endif |
| } else { |
| if (usb_pipetype(urb->pipe) == PIPE_BULK) { |
| priv->atl_ints[queue_entry].qh->toggle = dw3 & |
| (1 << 25); |
| priv->atl_ints[queue_entry].qh->ping = dw3 & |
| (1 << 26); |
| } |
| } |
| |
| length = PTD_XFERRED_LENGTH(dw3); |
| if (length) { |
| switch (DW1_GET_PID(dw1)) { |
| case IN_PID: |
| priv_read_copy(priv, |
| priv->atl_ints[queue_entry].data_buffer, |
| usb_hcd->regs + payload, payload, |
| length); |
| |
| case OUT_PID: |
| |
| urb->actual_length += length; |
| |
| case SETUP_PID: |
| break; |
| } |
| } |
| |
| priv->atl_ints[queue_entry].data_buffer = NULL; |
| priv->atl_ints[queue_entry].urb = NULL; |
| priv->atl_ints[queue_entry].qtd = NULL; |
| priv->atl_ints[queue_entry].qh = NULL; |
| |
| free_mem(priv, payload); |
| |
| isp1760_writel(skip_map, usb_hcd->regs + |
| HC_ATL_PTD_SKIPMAP_REG); |
| |
| if (urb->status == -EPIPE) { |
| /* HALT was received */ |
| |
| qtd = clean_up_qtdlist(qtd); |
| isp1760_urb_done(priv, urb, urb->status); |
| |
| } else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) { |
| /* short BULK received */ |
| |
| printk(KERN_ERR "short bulk, %d instead %zu\n", length, |
| qtd->length); |
| if (urb->transfer_flags & URB_SHORT_NOT_OK) { |
| urb->status = -EREMOTEIO; |
| printk(KERN_ERR "not okey\n"); |
| } |
| |
| if (urb->status == -EINPROGRESS) |
| urb->status = 0; |
| |
| qtd = clean_up_qtdlist(qtd); |
| |
| isp1760_urb_done(priv, urb, urb->status); |
| |
| } else if (qtd->status & URB_COMPLETE_NOTIFY) { |
| /* that was the last qtd of that URB */ |
| |
| if (urb->status == -EINPROGRESS) |
| urb->status = 0; |
| |
| qtd = clean_this_qtd(qtd); |
| isp1760_urb_done(priv, urb, urb->status); |
| |
| } else { |
| /* next QTD of this URB */ |
| |
| qtd = clean_this_qtd(qtd); |
| BUG_ON(!qtd); |
| } |
| |
| if (qtd) |
| enqueue_an_ATL_packet(usb_hcd, qh, qtd); |
| |
| skip_map = isp1760_readl(usb_hcd->regs + |
| HC_ATL_PTD_SKIPMAP_REG); |
| } |
| } |
| |
| static void do_intl_int(struct usb_hcd *usb_hcd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); |
| u32 done_map, skip_map; |
| struct ptd ptd; |
| struct urb *urb = NULL; |
| u32 int_regs; |
| u32 int_regs_base; |
| u32 payload; |
| u32 length; |
| u32 or_map; |
| int error; |
| u32 queue_entry; |
| struct isp1760_qtd *qtd; |
| struct isp1760_qh *qh; |
| |
| done_map = isp1760_readl(usb_hcd->regs + |
| HC_INT_PTD_DONEMAP_REG); |
| skip_map = isp1760_readl(usb_hcd->regs + |
| HC_INT_PTD_SKIPMAP_REG); |
| |
| or_map = isp1760_readl(usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG); |
| or_map &= ~done_map; |
| isp1760_writel(or_map, usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG); |
| |
| int_regs_base = INT_REGS_OFFSET; |
| |
| while (done_map) { |
| u32 dw1; |
| u32 dw3; |
| |
| queue_entry = __ffs(done_map); |
| done_map &= ~(1 << queue_entry); |
| skip_map |= 1 << queue_entry; |
| |
| int_regs = int_regs_base + queue_entry * sizeof(struct ptd); |
| urb = priv->int_ints[queue_entry].urb; |
| qtd = priv->int_ints[queue_entry].qtd; |
| qh = priv->int_ints[queue_entry].qh; |
| payload = priv->int_ints[queue_entry].payload; |
| |
| if (!qh) { |
| printk(KERN_ERR "(INT) qh is 0\n"); |
| continue; |
| } |
| |
| priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs, |
| int_regs, sizeof(ptd)); |
| dw1 = le32_to_cpu(ptd.dw1); |
| dw3 = le32_to_cpu(ptd.dw3); |
| check_int_err_status(le32_to_cpu(ptd.dw4)); |
| |
| error = check_error(&ptd); |
| if (error) { |
| #if 0 |
| printk(KERN_ERR "Error in %s().\n", __func__); |
| printk(KERN_ERR "IN dw0: %08x dw1: %08x dw2: %08x " |
| "dw3: %08x dw4: %08x dw5: %08x dw6: " |
| "%08x dw7: %08x\n", |
| ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3, |
| ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7); |
| #endif |
| urb->status = -EPIPE; |
| priv->int_ints[queue_entry].qh->toggle = 0; |
| priv->int_ints[queue_entry].qh->ping = 0; |
| |
| } else { |
| priv->int_ints[queue_entry].qh->toggle = |
| dw3 & (1 << 25); |
| priv->int_ints[queue_entry].qh->ping = dw3 & (1 << 26); |
| } |
| |
| if (urb->dev->speed != USB_SPEED_HIGH) |
| length = PTD_XFERRED_LENGTH_LO(dw3); |
| else |
| length = PTD_XFERRED_LENGTH(dw3); |
| |
| if (length) { |
| switch (DW1_GET_PID(dw1)) { |
| case IN_PID: |
| priv_read_copy(priv, |
| priv->int_ints[queue_entry].data_buffer, |
| usb_hcd->regs + payload , payload, |
| length); |
| case OUT_PID: |
| |
| urb->actual_length += length; |
| |
| case SETUP_PID: |
| break; |
| } |
| } |
| |
| priv->int_ints[queue_entry].data_buffer = NULL; |
| priv->int_ints[queue_entry].urb = NULL; |
| priv->int_ints[queue_entry].qtd = NULL; |
| priv->int_ints[queue_entry].qh = NULL; |
| |
| isp1760_writel(skip_map, usb_hcd->regs + |
| HC_INT_PTD_SKIPMAP_REG); |
| free_mem(priv, payload); |
| |
| if (urb->status == -EPIPE) { |
| /* HALT received */ |
| |
| qtd = clean_up_qtdlist(qtd); |
| isp1760_urb_done(priv, urb, urb->status); |
| |
| } else if (qtd->status & URB_COMPLETE_NOTIFY) { |
| |
| if (urb->status == -EINPROGRESS) |
| urb->status = 0; |
| |
| qtd = clean_this_qtd(qtd); |
| isp1760_urb_done(priv, urb, urb->status); |
| |
| } else { |
| /* next QTD of this URB */ |
| |
| qtd = clean_this_qtd(qtd); |
| BUG_ON(!qtd); |
| } |
| |
| if (qtd) |
| enqueue_an_INT_packet(usb_hcd, qh, qtd); |
| |
| skip_map = isp1760_readl(usb_hcd->regs + |
| HC_INT_PTD_SKIPMAP_REG); |
| } |
| } |
| |
| #define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) |
| static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb, |
| gfp_t flags) |
| { |
| struct isp1760_qh *qh; |
| int is_input, type; |
| |
| qh = isp1760_qh_alloc(priv, flags); |
| if (!qh) |
| return qh; |
| |
| /* |
| * init endpoint/device data for this QH |
| */ |
| is_input = usb_pipein(urb->pipe); |
| type = usb_pipetype(urb->pipe); |
| |
| if (type == PIPE_INTERRUPT) { |
| |
| if (urb->dev->speed == USB_SPEED_HIGH) { |
| |
| qh->period = urb->interval >> 3; |
| if (qh->period == 0 && urb->interval != 1) { |
| /* NOTE interval 2 or 4 uframes could work. |
| * But interval 1 scheduling is simpler, and |
| * includes high bandwidth. |
| */ |
| printk(KERN_ERR "intr period %d uframes, NYET!", |
| urb->interval); |
| qh_destroy(qh); |
| return NULL; |
| } |
| } else { |
| qh->period = urb->interval; |
| } |
| } |
| |
| /* support for tt scheduling, and access to toggles */ |
| qh->dev = urb->dev; |
| |
| if (!usb_pipecontrol(urb->pipe)) |
| usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input, |
| 1); |
| return qh; |
| } |
| |
| /* |
| * For control/bulk/interrupt, return QH with these TDs appended. |
| * Allocates and initializes the QH if necessary. |
| * Returns null if it can't allocate a QH it needs to. |
| * If the QH has TDs (urbs) already, that's great. |
| */ |
| static struct isp1760_qh *qh_append_tds(struct isp1760_hcd *priv, |
| struct urb *urb, struct list_head *qtd_list, int epnum, |
| void **ptr) |
| { |
| struct isp1760_qh *qh; |
| struct isp1760_qtd *qtd; |
| struct isp1760_qtd *prev_qtd; |
| |
| qh = (struct isp1760_qh *)*ptr; |
| if (!qh) { |
| /* can't sleep here, we have priv->lock... */ |
| qh = qh_make(priv, urb, GFP_ATOMIC); |
| if (!qh) |
| return qh; |
| *ptr = qh; |
| } |
| |
| qtd = list_entry(qtd_list->next, struct isp1760_qtd, |
| qtd_list); |
| if (!list_empty(&qh->qtd_list)) |
| prev_qtd = list_entry(qh->qtd_list.prev, |
| struct isp1760_qtd, qtd_list); |
| else |
| prev_qtd = NULL; |
| |
| list_splice(qtd_list, qh->qtd_list.prev); |
| if (prev_qtd) { |
| BUG_ON(prev_qtd->hw_next); |
| prev_qtd->hw_next = qtd; |
| } |
| |
| urb->hcpriv = qh; |
| return qh; |
| } |
| |
| static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb, |
| struct list_head *qtd_list) |
| { |
| struct list_head *entry, *temp; |
| |
| list_for_each_safe(entry, temp, qtd_list) { |
| struct isp1760_qtd *qtd; |
| |
| qtd = list_entry(entry, struct isp1760_qtd, qtd_list); |
| list_del(&qtd->qtd_list); |
| isp1760_qtd_free(qtd); |
| } |
| } |
| |
| static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, |
| struct list_head *qtd_list, gfp_t mem_flags, packet_enqueue *p) |
| { |
| struct isp1760_qtd *qtd; |
| int epnum; |
| unsigned long flags; |
| struct isp1760_qh *qh = NULL; |
| int rc; |
| int qh_busy; |
| |
| qtd = list_entry(qtd_list->next, struct isp1760_qtd, qtd_list); |
| epnum = urb->ep->desc.bEndpointAddress; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) { |
| rc = -ESHUTDOWN; |
| goto done; |
| } |
| rc = usb_hcd_link_urb_to_ep(priv_to_hcd(priv), urb); |
| if (rc) |
| goto done; |
| |
| qh = urb->ep->hcpriv; |
| if (qh) |
| qh_busy = !list_empty(&qh->qtd_list); |
| else |
| qh_busy = 0; |
| |
| qh = qh_append_tds(priv, urb, qtd_list, epnum, &urb->ep->hcpriv); |
| if (!qh) { |
| usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); |
| rc = -ENOMEM; |
| goto done; |
| } |
| |
| if (!qh_busy) |
| p(priv_to_hcd(priv), qh, qtd); |
| |
| done: |
| spin_unlock_irqrestore(&priv->lock, flags); |
| if (!qh) |
| qtd_list_free(priv, urb, qtd_list); |
| return rc; |
| } |
| |
| static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv, |
| gfp_t flags) |
| { |
| struct isp1760_qtd *qtd; |
| |
| qtd = kmem_cache_zalloc(qtd_cachep, flags); |
| if (qtd) |
| INIT_LIST_HEAD(&qtd->qtd_list); |
| |
| return qtd; |
| } |
| |
| /* |
| * create a list of filled qtds for this URB; won't link into qh. |
| */ |
| static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, |
| struct urb *urb, struct list_head *head, gfp_t flags) |
| { |
| struct isp1760_qtd *qtd, *qtd_prev; |
| void *buf; |
| int len, maxpacket; |
| int is_input; |
| u32 token; |
| |
| /* |
| * URBs map to sequences of QTDs: one logical transaction |
| */ |
| qtd = isp1760_qtd_alloc(priv, flags); |
| if (!qtd) |
| return NULL; |
| |
| list_add_tail(&qtd->qtd_list, head); |
| qtd->urb = urb; |
| urb->status = -EINPROGRESS; |
| |
| token = 0; |
| /* for split transactions, SplitXState initialized to zero */ |
| |
| len = urb->transfer_buffer_length; |
| is_input = usb_pipein(urb->pipe); |
| if (usb_pipecontrol(urb->pipe)) { |
| /* SETUP pid */ |
| qtd_fill(qtd, urb->setup_packet, |
| sizeof(struct usb_ctrlrequest), |
| token | SETUP_PID); |
| |
| /* ... and always at least one more pid */ |
| token ^= DATA_TOGGLE; |
| qtd_prev = qtd; |
| qtd = isp1760_qtd_alloc(priv, flags); |
| if (!qtd) |
| goto cleanup; |
| qtd->urb = urb; |
| qtd_prev->hw_next = qtd; |
| list_add_tail(&qtd->qtd_list, head); |
| |
| /* for zero length DATA stages, STATUS is always IN */ |
| if (len == 0) |
| token |= IN_PID; |
| } |
| |
| /* |
| * data transfer stage: buffer setup |
| */ |
| buf = urb->transfer_buffer; |
| |
| if (is_input) |
| token |= IN_PID; |
| else |
| token |= OUT_PID; |
| |
| maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input)); |
| |
| /* |
| * buffer gets wrapped in one or more qtds; |
| * last one may be "short" (including zero len) |
| * and may serve as a control status ack |
| */ |
| for (;;) { |
| int this_qtd_len; |
| |
| if (!buf && len) { |
| /* XXX This looks like usb storage / SCSI bug */ |
| printk(KERN_ERR "buf is null, dma is %08lx len is %d\n", |
| (long unsigned)urb->transfer_dma, len); |
| WARN_ON(1); |
| } |
| |
| this_qtd_len = qtd_fill(qtd, buf, len, token); |
| len -= this_qtd_len; |
| buf += this_qtd_len; |
| |
| /* qh makes control packets use qtd toggle; maybe switch it */ |
| if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0) |
| token ^= DATA_TOGGLE; |
| |
| if (len <= 0) |
| break; |
| |
| qtd_prev = qtd; |
| qtd = isp1760_qtd_alloc(priv, flags); |
| if (!qtd) |
| goto cleanup; |
| qtd->urb = urb; |
| qtd_prev->hw_next = qtd; |
| list_add_tail(&qtd->qtd_list, head); |
| } |
| |
| /* |
| * control requests may need a terminating data "status" ack; |
| * bulk ones may need a terminating short packet (zero length). |
| */ |
| if (urb->transfer_buffer_length != 0) { |
| int one_more = 0; |
| |
| if (usb_pipecontrol(urb->pipe)) { |
| one_more = 1; |
| /* "in" <--> "out" */ |
| token ^= IN_PID; |
| /* force DATA1 */ |
| token |= DATA_TOGGLE; |
| } else if (usb_pipebulk(urb->pipe) |
| && (urb->transfer_flags & URB_ZERO_PACKET) |
| && !(urb->transfer_buffer_length % maxpacket)) { |
| one_more = 1; |
| } |
| if (one_more) { |
| qtd_prev = qtd; |
| qtd = isp1760_qtd_alloc(priv, flags); |
| if (!qtd) |
| goto cleanup; |
| qtd->urb = urb; |
| qtd_prev->hw_next = qtd; |
| list_add_tail(&qtd->qtd_list, head); |
| |
| /* never any data in such packets */ |
| qtd_fill(qtd, NULL, 0, token); |
| } |
| } |
| |
| qtd->status = URB_COMPLETE_NOTIFY; |
| return head; |
| |
| cleanup: |
| qtd_list_free(priv, urb, head); |
| return NULL; |
| } |
| |
| static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, |
| gfp_t mem_flags) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| struct list_head qtd_list; |
| packet_enqueue *pe; |
| |
| INIT_LIST_HEAD(&qtd_list); |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_CONTROL: |
| case PIPE_BULK: |
| |
| if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags)) |
| return -ENOMEM; |
| pe = enqueue_an_ATL_packet; |
| break; |
| |
| case PIPE_INTERRUPT: |
| if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags)) |
| return -ENOMEM; |
| pe = enqueue_an_INT_packet; |
| break; |
| |
| case PIPE_ISOCHRONOUS: |
| printk(KERN_ERR "PIPE_ISOCHRONOUS ain't supported\n"); |
| default: |
| return -EPIPE; |
| } |
| |
| isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe); |
| return 0; |
| } |
| |
| static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, |
| int status) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| struct inter_packet_info *ints; |
| u32 i; |
| u32 reg_base, or_reg, skip_reg; |
| int flags; |
| struct ptd ptd; |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_ISOCHRONOUS: |
| return -EPIPE; |
| break; |
| |
| case PIPE_INTERRUPT: |
| ints = priv->int_ints; |
| reg_base = INT_REGS_OFFSET; |
| or_reg = HC_INT_IRQ_MASK_OR_REG; |
| skip_reg = HC_INT_PTD_SKIPMAP_REG; |
| break; |
| |
| default: |
| ints = priv->atl_ints; |
| reg_base = ATL_REGS_OFFSET; |
| or_reg = HC_ATL_IRQ_MASK_OR_REG; |
| skip_reg = HC_ATL_PTD_SKIPMAP_REG; |
| break; |
| } |
| |
| memset(&ptd, 0, sizeof(ptd)); |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| for (i = 0; i < 32; i++) { |
| if (ints->urb == urb) { |
| u32 skip_map; |
| u32 or_map; |
| struct isp1760_qtd *qtd; |
| |
| skip_map = isp1760_readl(hcd->regs + skip_reg); |
| skip_map |= 1 << i; |
| isp1760_writel(skip_map, hcd->regs + skip_reg); |
| |
| or_map = isp1760_readl(hcd->regs + or_reg); |
| or_map &= ~(1 << i); |
| isp1760_writel(or_map, hcd->regs + or_reg); |
| |
| priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base |
| + i * sizeof(ptd), sizeof(ptd)); |
| qtd = ints->qtd; |
| |
| clean_up_qtdlist(qtd); |
| |
| free_mem(priv, ints->payload); |
| |
| ints->urb = NULL; |
| ints->qh = NULL; |
| ints->qtd = NULL; |
| ints->data_buffer = NULL; |
| ints->payload = 0; |
| |
| isp1760_urb_done(priv, urb, status); |
| break; |
| } |
| ints++; |
| } |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return 0; |
| } |
| |
| static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); |
| u32 imask; |
| irqreturn_t irqret = IRQ_NONE; |
| |
| spin_lock(&priv->lock); |
| |
| if (!(usb_hcd->state & HC_STATE_RUNNING)) |
| goto leave; |
| |
| imask = isp1760_readl(usb_hcd->regs + HC_INTERRUPT_REG); |
| if (unlikely(!imask)) |
| goto leave; |
| |
| isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG); |
| if (imask & HC_ATL_INT) |
| do_atl_int(usb_hcd); |
| |
| if (imask & HC_INTL_INT) |
| do_intl_int(usb_hcd); |
| |
| irqret = IRQ_HANDLED; |
| leave: |
| spin_unlock(&priv->lock); |
| return irqret; |
| } |
| |
| static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| u32 temp, status = 0; |
| u32 mask; |
| int retval = 1; |
| unsigned long flags; |
| |
| /* if !USB_SUSPEND, root hub timers won't get shut down ... */ |
| if (!HC_IS_RUNNING(hcd->state)) |
| return 0; |
| |
| /* init status to no-changes */ |
| buf[0] = 0; |
| mask = PORT_CSC; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| temp = isp1760_readl(hcd->regs + HC_PORTSC1); |
| |
| if (temp & PORT_OWNER) { |
| if (temp & PORT_CSC) { |
| temp &= ~PORT_CSC; |
| isp1760_writel(temp, hcd->regs + HC_PORTSC1); |
| goto done; |
| } |
| } |
| |
| /* |
| * Return status information even for ports with OWNER set. |
| * Otherwise khubd wouldn't see the disconnect event when a |
| * high-speed device is switched over to the companion |
| * controller by the user. |
| */ |
| |
| if ((temp & mask) != 0 |
| || ((temp & PORT_RESUME) != 0 |
| && time_after_eq(jiffies, |
| priv->reset_done))) { |
| buf [0] |= 1 << (0 + 1); |
| status = STS_PCD; |
| } |
| /* FIXME autosuspend idle root hubs */ |
| done: |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return status ? retval : 0; |
| } |
| |
| static void isp1760_hub_descriptor(struct isp1760_hcd *priv, |
| struct usb_hub_descriptor *desc) |
| { |
| int ports = HCS_N_PORTS(priv->hcs_params); |
| u16 temp; |
| |
| desc->bDescriptorType = 0x29; |
| /* priv 1.0, 2.3.9 says 20ms max */ |
| desc->bPwrOn2PwrGood = 10; |
| desc->bHubContrCurrent = 0; |
| |
| desc->bNbrPorts = ports; |
| temp = 1 + (ports / 8); |
| desc->bDescLength = 7 + 2 * temp; |
| |
| /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ |
| memset(&desc->bitmap[0], 0, temp); |
| memset(&desc->bitmap[temp], 0xff, temp); |
| |
| /* per-port overcurrent reporting */ |
| temp = 0x0008; |
| if (HCS_PPC(priv->hcs_params)) |
| /* per-port power control */ |
| temp |= 0x0001; |
| else |
| /* no power switching */ |
| temp |= 0x0002; |
| desc->wHubCharacteristics = cpu_to_le16(temp); |
| } |
| |
| #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) |
| |
| static int check_reset_complete(struct isp1760_hcd *priv, int index, |
| u32 __iomem *status_reg, int port_status) |
| { |
| if (!(port_status & PORT_CONNECT)) |
| return port_status; |
| |
| /* if reset finished and it's still not enabled -- handoff */ |
| if (!(port_status & PORT_PE)) { |
| |
| printk(KERN_ERR "port %d full speed --> companion\n", |
| index + 1); |
| |
| port_status |= PORT_OWNER; |
| port_status &= ~PORT_RWC_BITS; |
| isp1760_writel(port_status, status_reg); |
| |
| } else |
| printk(KERN_ERR "port %d high speed\n", index + 1); |
| |
| return port_status; |
| } |
| |
| static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, |
| u16 wValue, u16 wIndex, char *buf, u16 wLength) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| int ports = HCS_N_PORTS(priv->hcs_params); |
| u32 __iomem *status_reg = hcd->regs + HC_PORTSC1; |
| u32 temp, status; |
| unsigned long flags; |
| int retval = 0; |
| unsigned selector; |
| |
| /* |
| * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. |
| * HCS_INDICATOR may say we can change LEDs to off/amber/green. |
| * (track current state ourselves) ... blink for diagnostics, |
| * power, "this is the one", etc. EHCI spec supports this. |
| */ |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| switch (typeReq) { |
| case ClearHubFeature: |
| switch (wValue) { |
| case C_HUB_LOCAL_POWER: |
| case C_HUB_OVER_CURRENT: |
| /* no hub-wide feature/status flags */ |
| break; |
| default: |
| goto error; |
| } |
| break; |
| case ClearPortFeature: |
| if (!wIndex || wIndex > ports) |
| goto error; |
| wIndex--; |
| temp = isp1760_readl(status_reg); |
| |
| /* |
| * Even if OWNER is set, so the port is owned by the |
| * companion controller, khubd needs to be able to clear |
| * the port-change status bits (especially |
| * USB_PORT_FEAT_C_CONNECTION). |
| */ |
| |
| switch (wValue) { |
| case USB_PORT_FEAT_ENABLE: |
| isp1760_writel(temp & ~PORT_PE, status_reg); |
| break; |
| case USB_PORT_FEAT_C_ENABLE: |
| /* XXX error? */ |
| break; |
| case USB_PORT_FEAT_SUSPEND: |
| if (temp & PORT_RESET) |
| goto error; |
| |
| if (temp & PORT_SUSPEND) { |
| if ((temp & PORT_PE) == 0) |
| goto error; |
| /* resume signaling for 20 msec */ |
| temp &= ~(PORT_RWC_BITS); |
| isp1760_writel(temp | PORT_RESUME, |
| status_reg); |
| priv->reset_done = jiffies + |
| msecs_to_jiffies(20); |
| } |
| break; |
| case USB_PORT_FEAT_C_SUSPEND: |
| /* we auto-clear this feature */ |
| break; |
| case USB_PORT_FEAT_POWER: |
| if (HCS_PPC(priv->hcs_params)) |
| isp1760_writel(temp & ~PORT_POWER, status_reg); |
| break; |
| case USB_PORT_FEAT_C_CONNECTION: |
| isp1760_writel(temp | PORT_CSC, |
| status_reg); |
| break; |
| case USB_PORT_FEAT_C_OVER_CURRENT: |
| /* XXX error ?*/ |
| break; |
| case USB_PORT_FEAT_C_RESET: |
| /* GetPortStatus clears reset */ |
| break; |
| default: |
| goto error; |
| } |
| isp1760_readl(hcd->regs + HC_USBCMD); |
| break; |
| case GetHubDescriptor: |
| isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *) |
| buf); |
| break; |
| case GetHubStatus: |
| /* no hub-wide feature/status flags */ |
| memset(buf, 0, 4); |
| break; |
| case GetPortStatus: |
| if (!wIndex || wIndex > ports) |
| goto error; |
| wIndex--; |
| status = 0; |
| temp = isp1760_readl(status_reg); |
| |
| /* wPortChange bits */ |
| if (temp & PORT_CSC) |
| status |= 1 << USB_PORT_FEAT_C_CONNECTION; |
| |
| |
| /* whoever resumes must GetPortStatus to complete it!! */ |
| if (temp & PORT_RESUME) { |
| printk(KERN_ERR "Port resume should be skipped.\n"); |
| |
| /* Remote Wakeup received? */ |
| if (!priv->reset_done) { |
| /* resume signaling for 20 msec */ |
| priv->reset_done = jiffies |
| + msecs_to_jiffies(20); |
| /* check the port again */ |
| mod_timer(&priv_to_hcd(priv)->rh_timer, |
| priv->reset_done); |
| } |
| |
| /* resume completed? */ |
| else if (time_after_eq(jiffies, |
| priv->reset_done)) { |
| status |= 1 << USB_PORT_FEAT_C_SUSPEND; |
| priv->reset_done = 0; |
| |
| /* stop resume signaling */ |
| temp = isp1760_readl(status_reg); |
| isp1760_writel( |
| temp & ~(PORT_RWC_BITS | PORT_RESUME), |
| status_reg); |
| retval = handshake(priv, status_reg, |
| PORT_RESUME, 0, 2000 /* 2msec */); |
| if (retval != 0) { |
| isp1760_err(priv, |
| "port %d resume error %d\n", |
| wIndex + 1, retval); |
| goto error; |
| } |
| temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10)); |
| } |
| } |
| |
| /* whoever resets must GetPortStatus to complete it!! */ |
| if ((temp & PORT_RESET) |
| && time_after_eq(jiffies, |
| priv->reset_done)) { |
| status |= 1 << USB_PORT_FEAT_C_RESET; |
| priv->reset_done = 0; |
| |
| /* force reset to complete */ |
| isp1760_writel(temp & ~PORT_RESET, |
| status_reg); |
| /* REVISIT: some hardware needs 550+ usec to clear |
| * this bit; seems too long to spin routinely... |
| */ |
| retval = handshake(priv, status_reg, |
| PORT_RESET, 0, 750); |
| if (retval != 0) { |
| isp1760_err(priv, "port %d reset error %d\n", |
| wIndex + 1, retval); |
| goto error; |
| } |
| |
| /* see what we found out */ |
| temp = check_reset_complete(priv, wIndex, status_reg, |
| isp1760_readl(status_reg)); |
| } |
| /* |
| * Even if OWNER is set, there's no harm letting khubd |
| * see the wPortStatus values (they should all be 0 except |
| * for PORT_POWER anyway). |
| */ |
| |
| if (temp & PORT_OWNER) |
| printk(KERN_ERR "Warning: PORT_OWNER is set\n"); |
| |
| if (temp & PORT_CONNECT) { |
| status |= 1 << USB_PORT_FEAT_CONNECTION; |
| /* status may be from integrated TT */ |
| status |= ehci_port_speed(priv, temp); |
| } |
| if (temp & PORT_PE) |
| status |= 1 << USB_PORT_FEAT_ENABLE; |
| if (temp & (PORT_SUSPEND|PORT_RESUME)) |
| status |= 1 << USB_PORT_FEAT_SUSPEND; |
| if (temp & PORT_RESET) |
| status |= 1 << USB_PORT_FEAT_RESET; |
| if (temp & PORT_POWER) |
| status |= 1 << USB_PORT_FEAT_POWER; |
| |
| put_unaligned(cpu_to_le32(status), (__le32 *) buf); |
| break; |
| case SetHubFeature: |
| switch (wValue) { |
| case C_HUB_LOCAL_POWER: |
| case C_HUB_OVER_CURRENT: |
| /* no hub-wide feature/status flags */ |
| break; |
| default: |
| goto error; |
| } |
| break; |
| case SetPortFeature: |
| selector = wIndex >> 8; |
| wIndex &= 0xff; |
| if (!wIndex || wIndex > ports) |
| goto error; |
| wIndex--; |
| temp = isp1760_readl(status_reg); |
| if (temp & PORT_OWNER) |
| break; |
| |
| /* temp &= ~PORT_RWC_BITS; */ |
| switch (wValue) { |
| case USB_PORT_FEAT_ENABLE: |
| isp1760_writel(temp | PORT_PE, status_reg); |
| break; |
| |
| case USB_PORT_FEAT_SUSPEND: |
| if ((temp & PORT_PE) == 0 |
| || (temp & PORT_RESET) != 0) |
| goto error; |
| |
| isp1760_writel(temp | PORT_SUSPEND, status_reg); |
| break; |
| case USB_PORT_FEAT_POWER: |
| if (HCS_PPC(priv->hcs_params)) |
| isp1760_writel(temp | PORT_POWER, |
| status_reg); |
| break; |
| case USB_PORT_FEAT_RESET: |
| if (temp & PORT_RESUME) |
| goto error; |
| /* line status bits may report this as low speed, |
| * which can be fine if this root hub has a |
| * transaction translator built in. |
| */ |
| if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT |
| && PORT_USB11(temp)) { |
| temp |= PORT_OWNER; |
| } else { |
| temp |= PORT_RESET; |
| temp &= ~PORT_PE; |
| |
| /* |
| * caller must wait, then call GetPortStatus |
| * usb 2.0 spec says 50 ms resets on root |
| */ |
| priv->reset_done = jiffies + |
| msecs_to_jiffies(50); |
| } |
| isp1760_writel(temp, status_reg); |
| break; |
| default: |
| goto error; |
| } |
| isp1760_readl(hcd->regs + HC_USBCMD); |
| break; |
| |
| default: |
| error: |
| /* "stall" on error */ |
| retval = -EPIPE; |
| } |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return retval; |
| } |
| |
| static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd, |
| struct usb_host_endpoint *ep) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); |
| struct isp1760_qh *qh; |
| struct isp1760_qtd *qtd; |
| u32 flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| qh = ep->hcpriv; |
| if (!qh) |
| goto out; |
| |
| ep->hcpriv = NULL; |
| do { |
| /* more than entry might get removed */ |
| if (list_empty(&qh->qtd_list)) |
| break; |
| |
| qtd = list_first_entry(&qh->qtd_list, struct isp1760_qtd, |
| qtd_list); |
| |
| if (qtd->status & URB_ENQUEUED) { |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| isp1760_urb_dequeue(usb_hcd, qtd->urb, -ECONNRESET); |
| spin_lock_irqsave(&priv->lock, flags); |
| } else { |
| struct urb *urb; |
| |
| urb = qtd->urb; |
| clean_up_qtdlist(qtd); |
| isp1760_urb_done(priv, urb, -ECONNRESET); |
| } |
| } while (1); |
| |
| qh_destroy(qh); |
| /* remove requests and leak them. |
| * ATL are pretty fast done, INT could take a while... |
| * The latter shoule be removed |
| */ |
| out: |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| static int isp1760_get_frame(struct usb_hcd *hcd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| u32 fr; |
| |
| fr = isp1760_readl(hcd->regs + HC_FRINDEX); |
| return (fr >> 3) % priv->periodic_size; |
| } |
| |
| static void isp1760_stop(struct usb_hcd *hcd) |
| { |
| struct isp1760_hcd *priv = hcd_to_priv(hcd); |
| |
| isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1, |
| NULL, 0); |
| mdelay(20); |
| |
| spin_lock_irq(&priv->lock); |
| ehci_reset(priv); |
| /* Disable IRQ */ |
| isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL); |
| spin_unlock_irq(&priv->lock); |
| |
| isp1760_writel(0, hcd->regs + HC_CONFIGFLAG); |
| } |
| |
| static void isp1760_shutdown(struct usb_hcd *hcd) |
| { |
| u32 command; |
| |
| isp1760_stop(hcd); |
| isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL); |
| |
| command = isp1760_readl(hcd->regs + HC_USBCMD); |
| command &= ~CMD_RUN; |
| isp1760_writel(command, hcd->regs + HC_USBCMD); |
| } |
| |
| static const struct hc_driver isp1760_hc_driver = { |
| .description = "isp1760-hcd", |
| .product_desc = "NXP ISP1760 USB Host Controller", |
| .hcd_priv_size = sizeof(struct isp1760_hcd), |
| .irq = isp1760_irq, |
| .flags = HCD_MEMORY | HCD_USB2, |
| .reset = isp1760_hc_setup, |
| .start = isp1760_run, |
| .stop = isp1760_stop, |
| .shutdown = isp1760_shutdown, |
| .urb_enqueue = isp1760_urb_enqueue, |
| .urb_dequeue = isp1760_urb_dequeue, |
| .endpoint_disable = isp1760_endpoint_disable, |
| .get_frame_number = isp1760_get_frame, |
| .hub_status_data = isp1760_hub_status_data, |
| .hub_control = isp1760_hub_control, |
| }; |
| |
| int __init init_kmem_once(void) |
| { |
| qtd_cachep = kmem_cache_create("isp1760_qtd", |
| sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY | |
| SLAB_MEM_SPREAD, NULL); |
| |
| if (!qtd_cachep) |
| return -ENOMEM; |
| |
| qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh), |
| 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL); |
| |
| if (!qh_cachep) { |
| kmem_cache_destroy(qtd_cachep); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| void deinit_kmem_cache(void) |
| { |
| kmem_cache_destroy(qtd_cachep); |
| kmem_cache_destroy(qh_cachep); |
| } |
| |
| struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq, |
| u64 irqflags, struct device *dev, const char *busname) |
| { |
| struct usb_hcd *hcd; |
| struct isp1760_hcd *priv; |
| int ret; |
| |
| if (usb_disabled()) |
| return ERR_PTR(-ENODEV); |
| |
| /* prevent usb-core allocating DMA pages */ |
| dev->dma_mask = NULL; |
| |
| hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev->bus_id); |
| if (!hcd) |
| return ERR_PTR(-ENOMEM); |
| |
| priv = hcd_to_priv(hcd); |
| init_memory(priv); |
| hcd->regs = ioremap(res_start, res_len); |
| if (!hcd->regs) { |
| ret = -EIO; |
| goto err_put; |
| } |
| |
| ret = usb_add_hcd(hcd, irq, irqflags); |
| if (ret) |
| goto err_unmap; |
| |
| hcd->irq = irq; |
| hcd->rsrc_start = res_start; |
| hcd->rsrc_len = res_len; |
| |
| return hcd; |
| |
| err_unmap: |
| iounmap(hcd->regs); |
| |
| err_put: |
| usb_put_hcd(hcd); |
| |
| return ERR_PTR(ret); |
| } |
| |
| MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP"); |
| MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>"); |
| MODULE_LICENSE("GPL v2"); |