igb: Add i2c interface to igb.
Some of our adapters have sensors on them accessible via i2c and a private
interface. This patch implements the kernel interface for i2c to those sensors.
Subsequent patches will provide functions to export that data.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 342bbd6..0173b61 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -57,6 +57,7 @@
#ifdef CONFIG_IGB_DCA
#include <linux/dca.h>
#endif
+#include <linux/i2c.h>
#include "igb.h"
#define MAJ 4
@@ -567,6 +568,91 @@
return;
}
+/* igb_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ */
+static int igb_get_i2c_data(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return ((i2cctl & E1000_I2C_DATA_IN) != 0);
+}
+
+/* igb_set_i2c_data - Sets the I2C data bit
+ * @data: pointer to hardware structure
+ * @state: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ */
+static void igb_set_i2c_data(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state)
+ i2cctl |= E1000_I2C_DATA_OUT;
+ else
+ i2cctl &= ~E1000_I2C_DATA_OUT;
+
+ i2cctl &= ~E1000_I2C_DATA_OE_N;
+ i2cctl |= E1000_I2C_CLK_OE_N;
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+
+}
+
+/* igb_set_i2c_clk - Sets the I2C SCL clock
+ * @data: pointer to hardware structure
+ * @state: state to set clock
+ *
+ * Sets the I2C clock line to state
+ */
+static void igb_set_i2c_clk(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state) {
+ i2cctl |= E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ } else {
+ i2cctl &= ~E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ }
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+}
+
+/* igb_get_i2c_clk - Gets the I2C SCL clock state
+ * @data: pointer to hardware structure
+ *
+ * Gets the I2C clock state
+ */
+static int igb_get_i2c_clk(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return ((i2cctl & E1000_I2C_CLK_IN) != 0);
+}
+
+static const struct i2c_algo_bit_data igb_i2c_algo = {
+ .setsda = igb_set_i2c_data,
+ .setscl = igb_set_i2c_clk,
+ .getsda = igb_get_i2c_data,
+ .getscl = igb_get_i2c_clk,
+ .udelay = 5,
+ .timeout = 20,
+};
+
/**
* igb_get_hw_dev - return device
* used by hardware layer to print debugging information
@@ -1824,6 +1910,37 @@
return;
}
+static const struct i2c_board_info i350_sensor_info = {
+ I2C_BOARD_INFO("i350bb", 0Xf8),
+};
+
+/* igb_init_i2c - Init I2C interface
+ * @adapter: pointer to adapter structure
+ *
+ */
+static s32 igb_init_i2c(struct igb_adapter *adapter)
+{
+ s32 status = E1000_SUCCESS;
+
+ /* I2C interface supported on i350 devices */
+ if (adapter->hw.mac.type != e1000_i350)
+ return E1000_SUCCESS;
+
+ /* Initialize the i2c bus which is controlled by the registers.
+ * This bus will use the i2c_algo_bit structue that implements
+ * the protocol through toggling of the 4 bits in the register.
+ */
+ adapter->i2c_adap.owner = THIS_MODULE;
+ adapter->i2c_algo = igb_i2c_algo;
+ adapter->i2c_algo.data = adapter;
+ adapter->i2c_adap.algo_data = &adapter->i2c_algo;
+ adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
+ strlcpy(adapter->i2c_adap.name, "igb BB",
+ sizeof(adapter->i2c_adap.name));
+ status = i2c_bit_add_bus(&adapter->i2c_adap);
+ return status;
+}
+
/**
* igb_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -2116,6 +2233,13 @@
/* reset the hardware with the new settings */
igb_reset(adapter);
+ /* Init the I2C interface */
+ err = igb_init_i2c(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "failed to init i2c interface\n");
+ goto err_eeprom;
+ }
+
/* let the f/w know that the h/w is now under the control of the
* driver. */
igb_get_hw_control(adapter);
@@ -2177,6 +2301,7 @@
err_register:
igb_release_hw_control(adapter);
+ memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
err_eeprom:
if (!igb_check_reset_block(hw))
igb_reset_phy(hw);
@@ -2290,6 +2415,18 @@
}
#endif
+/*
+ * igb_remove_i2c - Cleanup I2C interface
+ * @adapter: pointer to adapter structure
+ *
+ */
+static void igb_remove_i2c(struct igb_adapter *adapter)
+{
+
+ /* free the adapter bus structure */
+ i2c_del_adapter(&adapter->i2c_adap);
+}
+
/**
* igb_remove - Device Removal Routine
* @pdev: PCI device information struct
@@ -2306,6 +2443,8 @@
struct e1000_hw *hw = &adapter->hw;
pm_runtime_get_noresume(&pdev->dev);
+ igb_remove_i2c(adapter);
+
igb_ptp_stop(adapter);
/*
@@ -7425,4 +7564,134 @@
}
}
+static DEFINE_SPINLOCK(i2c_clients_lock);
+
+/* igb_get_i2c_client - returns matching client
+ * in adapters's client list.
+ * @adapter: adapter struct
+ * @dev_addr: device address of i2c needed.
+ */
+struct i2c_client *
+igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
+{
+ ulong flags;
+ struct igb_i2c_client_list *client_list;
+ struct i2c_client *client = NULL;
+ struct i2c_board_info client_info = {
+ I2C_BOARD_INFO("igb", 0x00),
+ };
+
+ spin_lock_irqsave(&i2c_clients_lock, flags);
+ client_list = adapter->i2c_clients;
+
+ /* See if we already have an i2c_client */
+ while (client_list) {
+ if (client_list->client->addr == (dev_addr >> 1)) {
+ client = client_list->client;
+ goto exit;
+ } else {
+ client_list = client_list->next;
+ }
+ }
+
+ /* no client_list found, create a new one */
+ client_list = kzalloc(sizeof(*client_list), GFP_KERNEL);
+ if (client_list == NULL)
+ goto exit;
+
+ /* dev_addr passed to us is left-shifted by 1 bit
+ * i2c_new_device call expects it to be flush to the right.
+ */
+ client_info.addr = dev_addr >> 1;
+ client_info.platform_data = adapter;
+ client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
+ if (client_list->client == NULL) {
+ dev_info(&adapter->pdev->dev, "Failed to create new i2c device..\n");
+ goto err_no_client;
+ }
+
+ /* insert new client at head of list */
+ client_list->next = adapter->i2c_clients;
+ adapter->i2c_clients = client_list;
+
+ spin_unlock_irqrestore(&i2c_clients_lock, flags);
+
+ client = client_list->client;
+ goto exit;
+
+err_no_client:
+ kfree(client_list);
+exit:
+ spin_unlock_irqrestore(&i2c_clients_lock, flags);
+ return client;
+}
+
+/* igb_read_i2c_byte - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: device address
+ * @data: value read
+ *
+ * Performs byte read operation over I2C interface at
+ * a specified device address.
+ */
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+ s32 status;
+ u16 swfw_mask = 0;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
+ != E1000_SUCCESS)
+ return E1000_ERR_SWFW_SYNC;
+
+ status = i2c_smbus_read_byte_data(this_client, byte_offset);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status < 0)
+ return E1000_ERR_I2C;
+ else {
+ *data = status;
+ return E1000_SUCCESS;
+ }
+}
+
+/* igb_write_i2c_byte - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: device address
+ * @data: value to write
+ *
+ * Performs byte write operation over I2C interface at
+ * a specified device address.
+ */
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+ s32 status;
+ u16 swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS)
+ return E1000_ERR_SWFW_SYNC;
+ status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status)
+ return E1000_ERR_I2C;
+ else
+ return E1000_SUCCESS;
+
+}
/* igb_main.c */