| /* |
| * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. |
| * Please keep numerically sorted within individual areas, thanks! |
| * |
| * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais |
| * from Rudolf Gugler |
| * |
| */ |
| |
| |
| /**********************************/ |
| /***** devices using FTDI VID *****/ |
| /**********************************/ |
| |
| |
| #define FTDI_VID 0x0403 /* Vendor Id */ |
| |
| |
| /*** "original" FTDI device PIDs ***/ |
| |
| #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ |
| #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ |
| #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ |
| #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ |
| #define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */ |
| #define FTDI_FTX_PID 0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */ |
| #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ |
| #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ |
| |
| |
| /*** third-party PIDs (using FTDI_VID) ***/ |
| |
| #define FTDI_LUMEL_PD12_PID 0x6002 |
| |
| /* |
| * Marvell OpenRD Base, Client |
| * http://www.open-rd.org |
| * OpenRD Base, Client use VID 0x0403 |
| */ |
| #define MARVELL_OPENRD_PID 0x9e90 |
| |
| /* www.candapter.com Ewert Energy Systems CANdapter device */ |
| #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ |
| |
| /* |
| * Texas Instruments XDS100v2 JTAG / BeagleBone A3 |
| * http://processors.wiki.ti.com/index.php/XDS100 |
| * http://beagleboard.org/bone |
| */ |
| #define TI_XDS100V2_PID 0xa6d0 |
| |
| #define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ |
| #define FTDI_EV3CON_PID 0xABB9 /* Mindstorms EV3 Console Adapter */ |
| |
| /* US Interface Navigator (http://www.usinterface.com/) */ |
| #define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */ |
| #define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */ |
| #define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ |
| |
| /* OOCDlink by Joern Kaipf <joernk@web.de> |
| * (http://www.joernonline.de/) */ |
| #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ |
| |
| /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ |
| /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ |
| #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 |
| #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 |
| #define LMI_LM3S_ICDI_BOARD_PID 0xbcda |
| |
| #define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */ |
| |
| /* OpenDCC (www.opendcc.de) product id */ |
| #define FTDI_OPENDCC_PID 0xBFD8 |
| #define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 |
| #define FTDI_OPENDCC_THROTTLE_PID 0xBFDA |
| #define FTDI_OPENDCC_GATEWAY_PID 0xBFDB |
| #define FTDI_OPENDCC_GBM_PID 0xBFDC |
| #define FTDI_OPENDCC_GBM_BOOST_PID 0xBFDD |
| |
| /* NZR SEM 16+ USB (http://www.nzr.de) */ |
| #define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */ |
| |
| /* |
| * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) |
| */ |
| #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ |
| |
| /* DMX4ALL DMX Interfaces */ |
| #define FTDI_DMX4ALL 0xC850 |
| |
| /* |
| * ASK.fr devices |
| */ |
| #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ |
| |
| /* www.starting-point-systems.com µChameleon device */ |
| #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ |
| |
| /* |
| * Tactrix OpenPort (ECU) devices. |
| * OpenPort 1.3M submitted by Donour Sizemore. |
| * OpenPort 1.3S and 1.3U submitted by Ian Abbott. |
| */ |
| #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ |
| #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ |
| #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ |
| |
| #define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID 0xCFF8 |
| |
| /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ |
| /* the VID is the standard ftdi vid (FTDI_VID) */ |
| #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ |
| #define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ |
| #define FTDI_SCS_DEVICE_2_PID 0xD012 |
| #define FTDI_SCS_DEVICE_3_PID 0xD013 |
| #define FTDI_SCS_DEVICE_4_PID 0xD014 |
| #define FTDI_SCS_DEVICE_5_PID 0xD015 |
| #define FTDI_SCS_DEVICE_6_PID 0xD016 |
| #define FTDI_SCS_DEVICE_7_PID 0xD017 |
| |
| /* iPlus device */ |
| #define FTDI_IPLUS_PID 0xD070 /* Product Id */ |
| #define FTDI_IPLUS2_PID 0xD071 /* Product Id */ |
| |
| /* |
| * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. |
| */ |
| #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ |
| |
| /* Propox devices */ |
| #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 |
| #define FTDI_PROPOX_ISPCABLEIII_PID 0xD739 |
| |
| /* Lenz LI-USB Computer Interface. */ |
| #define FTDI_LENZ_LIUSB_PID 0xD780 |
| |
| /* Vardaan Enterprises Serial Interface VEUSB422R3 */ |
| #define FTDI_VARDAAN_PID 0xF070 |
| |
| /* |
| * Xsens Technologies BV products (http://www.xsens.com). |
| */ |
| #define XSENS_CONVERTER_0_PID 0xD388 |
| #define XSENS_CONVERTER_1_PID 0xD389 |
| #define XSENS_CONVERTER_2_PID 0xD38A |
| #define XSENS_CONVERTER_3_PID 0xD38B |
| #define XSENS_CONVERTER_4_PID 0xD38C |
| #define XSENS_CONVERTER_5_PID 0xD38D |
| #define XSENS_CONVERTER_6_PID 0xD38E |
| #define XSENS_CONVERTER_7_PID 0xD38F |
| |
| /** |
| * Zolix (www.zolix.com.cb) product ids |
| */ |
| #define FTDI_OMNI1509 0xD491 /* Omni1509 embedded USB-serial */ |
| |
| /* |
| * NDI (www.ndigital.com) product ids |
| */ |
| #define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ |
| #define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ |
| #define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ |
| #define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ |
| #define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ |
| |
| /* |
| * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs |
| */ |
| #define FTDI_CHAMSYS_24_MASTER_WING_PID 0xDAF8 |
| #define FTDI_CHAMSYS_PC_WING_PID 0xDAF9 |
| #define FTDI_CHAMSYS_USB_DMX_PID 0xDAFA |
| #define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB |
| #define FTDI_CHAMSYS_MINI_WING_PID 0xDAFC |
| #define FTDI_CHAMSYS_MAXI_WING_PID 0xDAFD |
| #define FTDI_CHAMSYS_MEDIA_WING_PID 0xDAFE |
| #define FTDI_CHAMSYS_WING_PID 0xDAFF |
| |
| /* |
| * Westrex International devices submitted by Cory Lee |
| */ |
| #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ |
| #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ |
| |
| /* |
| * ACG Identification Technologies GmbH products (http://www.acg.de/). |
| * Submitted by anton -at- goto10 -dot- org. |
| */ |
| #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ |
| |
| /* |
| * Definitions for Artemis astronomical USB based cameras |
| * Check it at http://www.artemisccd.co.uk/ |
| */ |
| #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ |
| |
| /* |
| * Definitions for ATIK Instruments astronomical USB based cameras |
| * Check it at http://www.atik-instruments.com/ |
| */ |
| #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ |
| #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ |
| #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ |
| #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ |
| #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ |
| |
| /* |
| * Yost Engineering, Inc. products (www.yostengineering.com). |
| * PID 0xE050 submitted by Aaron Prose. |
| */ |
| #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ |
| |
| /* |
| * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). |
| * Almost all of these devices use FTDI's vendor ID (0x0403). |
| * Further IDs taken from ELV Windows .inf file. |
| * |
| * The previously included PID for the UO 100 module was incorrect. |
| * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). |
| * |
| * Armin Laeuger originally sent the PID for the UM 100 module. |
| */ |
| #define FTDI_ELV_VID 0x1B1F /* ELV AG */ |
| #define FTDI_ELV_WS300_PID 0xC006 /* eQ3 WS 300 PC II */ |
| #define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */ |
| #define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */ |
| #define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */ |
| #define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */ |
| #define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */ |
| #define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */ |
| #define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */ |
| #define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */ |
| #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ |
| #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ |
| #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ |
| #define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */ |
| #define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */ |
| #define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */ |
| #define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */ |
| #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Energy monitor EM 1010 PC */ |
| #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ |
| #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ |
| #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ |
| #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ |
| #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ |
| #define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */ |
| #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ |
| #define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */ |
| #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ |
| #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ |
| #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ |
| #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ |
| #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ |
| #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ |
| #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ |
| #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ |
| #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ |
| #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ |
| #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ |
| #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ |
| /* Additional ELV PIDs that default to using the FTDI D2XX drivers on |
| * MS Windows, rather than the FTDI Virtual Com Port drivers. |
| * Maybe these will be easier to use with the libftdi/libusb user-space |
| * drivers, or possibly the Comedi drivers in some cases. */ |
| #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ |
| #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ |
| #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperatur-Feuchte-Messgeraet (TFM 100) */ |
| #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkuhr (UDF 77) */ |
| #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ |
| |
| /* |
| * EVER Eco Pro UPS (http://www.ever.com.pl/) |
| */ |
| |
| #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ |
| |
| /* |
| * Active Robots product ids. |
| */ |
| #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ |
| |
| /* Pyramid Computer GmbH */ |
| #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ |
| |
| /* www.elsterelectricity.com Elster Unicom III Optical Probe */ |
| #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ |
| |
| /* |
| * Gude Analog- und Digitalsysteme GmbH |
| */ |
| #define FTDI_GUDEADS_E808_PID 0xE808 |
| #define FTDI_GUDEADS_E809_PID 0xE809 |
| #define FTDI_GUDEADS_E80A_PID 0xE80A |
| #define FTDI_GUDEADS_E80B_PID 0xE80B |
| #define FTDI_GUDEADS_E80C_PID 0xE80C |
| #define FTDI_GUDEADS_E80D_PID 0xE80D |
| #define FTDI_GUDEADS_E80E_PID 0xE80E |
| #define FTDI_GUDEADS_E80F_PID 0xE80F |
| #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ |
| #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ |
| #define FTDI_GUDEADS_E88A_PID 0xE88A |
| #define FTDI_GUDEADS_E88B_PID 0xE88B |
| #define FTDI_GUDEADS_E88C_PID 0xE88C |
| #define FTDI_GUDEADS_E88D_PID 0xE88D |
| #define FTDI_GUDEADS_E88E_PID 0xE88E |
| #define FTDI_GUDEADS_E88F_PID 0xE88F |
| |
| /* |
| * Eclo (http://www.eclo.pt/) product IDs. |
| * PID 0xEA90 submitted by Martin Grill. |
| */ |
| #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ |
| |
| /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ |
| #define FTDI_TNC_X_PID 0xEBE0 |
| |
| /* |
| * Teratronik product ids. |
| * Submitted by O. Wölfelschneider. |
| */ |
| #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ |
| #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ |
| |
| /* Rig Expert Ukraine devices */ |
| #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ |
| |
| /* |
| * Hameg HO820 and HO870 interface (using VID 0x0403) |
| */ |
| #define HAMEG_HO820_PID 0xed74 |
| #define HAMEG_HO730_PID 0xed73 |
| #define HAMEG_HO720_PID 0xed72 |
| #define HAMEG_HO870_PID 0xed71 |
| |
| /* |
| * MaxStream devices www.maxstream.net |
| */ |
| #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ |
| |
| /* |
| * microHAM product IDs (http://www.microham.com). |
| * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> |
| * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. |
| * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. |
| */ |
| #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ |
| #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ |
| #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ |
| #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ |
| #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ |
| #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ |
| #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ |
| #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ |
| |
| /* Domintell products http://www.domintell.com */ |
| #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ |
| #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ |
| |
| /* |
| * The following are the values for the Perle Systems |
| * UltraPort USB serial converters |
| */ |
| #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ |
| |
| /* Sprog II (Andrew Crosland's SprogII DCC interface) */ |
| #define FTDI_SPROG_II 0xF0C8 |
| |
| /* |
| * Two of the Tagsys RFID Readers |
| */ |
| #define FTDI_TAGSYS_LP101_PID 0xF0E9 /* Tagsys L-P101 RFID*/ |
| #define FTDI_TAGSYS_P200X_PID 0xF0EE /* Tagsys Medio P200x RFID*/ |
| |
| /* an infrared receiver for user access control with IR tags */ |
| #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ |
| |
| /* ACT Solutions HomePro ZWave interface |
| (http://www.act-solutions.com/HomePro-Product-Matrix.html) */ |
| #define FTDI_ACTZWAVE_PID 0xF2D0 |
| |
| /* |
| * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, |
| * USB-TTY aktiv, USB-TTY passiv. Some PIDs are used by several devices |
| * and I'm not entirely sure which are used by which. |
| */ |
| #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 |
| #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 |
| #define FTDI_4N_GALAXY_DE_3_PID 0xF3C2 |
| |
| /* |
| * Linx Technologies product ids |
| */ |
| #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ |
| #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ |
| #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ |
| #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ |
| #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ |
| |
| /* |
| * Oceanic product ids |
| */ |
| #define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ |
| |
| /* |
| * SUUNTO product ids |
| */ |
| #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ |
| |
| /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ |
| /* http://www.usbuirt.com/ */ |
| #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ |
| |
| /* CCS Inc. ICDU/ICDU40 product ID - |
| * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */ |
| #define FTDI_CCSICDU20_0_PID 0xF9D0 |
| #define FTDI_CCSICDU40_1_PID 0xF9D1 |
| #define FTDI_CCSMACHX_2_PID 0xF9D2 |
| #define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 |
| #define FTDI_CCSICDU64_4_PID 0xF9D4 |
| #define FTDI_CCSPRIME8_5_PID 0xF9D5 |
| |
| /* |
| * The following are the values for the Matrix Orbital LCD displays, |
| * which are the FT232BM ( similar to the 8U232AM ) |
| */ |
| #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ |
| |
| /* |
| * Home Electronics (www.home-electro.com) USB gadgets |
| */ |
| #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ |
| |
| /* Inside Accesso contactless reader (http://www.insidecontactless.com/) */ |
| #define INSIDE_ACCESSO 0xFAD0 |
| |
| /* |
| * ThorLabs USB motor drivers |
| */ |
| #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ |
| |
| /* |
| * Protego product ids |
| */ |
| #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ |
| #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ |
| #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ |
| #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ |
| |
| /* |
| * Sony Ericsson product ids |
| */ |
| #define FTDI_DSS20_PID 0xFC82 /* DSS-20 Sync Station for Sony Ericsson P800 */ |
| #define FTDI_URBAN_0_PID 0xFC8A /* Sony Ericsson Urban, uart #0 */ |
| #define FTDI_URBAN_1_PID 0xFC8B /* Sony Ericsson Urban, uart #1 */ |
| |
| /* www.irtrans.de device */ |
| #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ |
| |
| /* |
| * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID) |
| * CAN fieldbus interface adapter, added by port GmbH www.port.de) |
| * Ian Abbott changed the macro names for consistency. |
| */ |
| #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ |
| /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ |
| #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ |
| |
| #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */ |
| |
| #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ |
| |
| /* |
| * PCDJ use ftdi based dj-controllers. The following PID is |
| * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp |
| * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen) |
| */ |
| #define FTDI_PCDJ_DAC2_PID 0xFA88 |
| |
| #define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */ |
| |
| /* |
| * DIEBOLD BCS SE923 (FTDI_VID) |
| */ |
| #define DIEBOLD_BCS_SE923_PID 0xfb99 |
| |
| /* www.crystalfontz.com devices |
| * - thanx for providing free devices for evaluation ! |
| * they use the ftdi chipset for the USB interface |
| * and the vendor id is the same |
| */ |
| #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ |
| #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ |
| #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ |
| #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ |
| #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ |
| #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ |
| #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ |
| #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ |
| |
| /* |
| * Video Networks Limited / Homechoice in the UK use an ftdi-based device |
| * for their 1Mb broadband internet service. The following PID is exhibited |
| * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID) |
| */ |
| #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ |
| |
| /* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */ |
| #define FTDI_AMC232_PID 0xFF00 /* Product Id */ |
| |
| /* |
| * IBS elektronik product ids (FTDI_VID) |
| * Submitted by Thomas Schleusener |
| */ |
| #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ |
| #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ |
| #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ |
| #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ |
| #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ |
| #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ |
| #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ |
| #define FTDI_IBS_PROD_PID 0xff3f /* future device */ |
| /* www.canusb.com Lawicel CANUSB device (FTDI_VID) */ |
| #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ |
| |
| /* |
| * TavIR AVR product ids (FTDI_VID) |
| */ |
| #define FTDI_TAVIR_STK500_PID 0xFA33 /* STK500 AVR programmer */ |
| |
| /* |
| * TIAO product ids (FTDI_VID) |
| * http://www.tiaowiki.com/w/Main_Page |
| */ |
| #define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol Adapter */ |
| |
| |
| /********************************/ |
| /** third-party VID/PID combos **/ |
| /********************************/ |
| |
| |
| |
| /* |
| * Atmel STK541 |
| */ |
| #define ATMEL_VID 0x03eb /* Vendor ID */ |
| #define STK541_PID 0x2109 /* Zigbee Controller */ |
| |
| /* |
| * Blackfin gnICE JTAG |
| * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice |
| */ |
| #define ADI_VID 0x0456 |
| #define ADI_GNICE_PID 0xF000 |
| #define ADI_GNICEPLUS_PID 0xF001 |
| |
| /* |
| * Microchip Technology, Inc. |
| * |
| * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are |
| * used by single function CDC ACM class based firmware demo |
| * applications. The VID/PID has also been used in firmware |
| * emulating FTDI serial chips by: |
| * Hornby Elite - Digital Command Control Console |
| * http://www.hornby.com/hornby-dcc/controllers/ |
| */ |
| #define MICROCHIP_VID 0x04D8 |
| #define MICROCHIP_USB_BOARD_PID 0x000A /* CDC RS-232 Emulation Demo */ |
| |
| /* |
| * RATOC REX-USB60F |
| */ |
| #define RATOC_VENDOR_ID 0x0584 |
| #define RATOC_PRODUCT_ID_USB60F 0xb020 |
| |
| /* |
| * Acton Research Corp. |
| */ |
| #define ACTON_VID 0x0647 /* Vendor ID */ |
| #define ACTON_SPECTRAPRO_PID 0x0100 |
| |
| /* |
| * Contec products (http://www.contec.com) |
| * Submitted by Daniel Sangorrin |
| */ |
| #define CONTEC_VID 0x06CE /* Vendor ID */ |
| #define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */ |
| |
| /* |
| * Mitsubishi Electric Corp. (http://www.meau.com) |
| * Submitted by Konstantin Holoborodko |
| */ |
| #define MITSUBISHI_VID 0x06D3 |
| #define MITSUBISHI_FXUSB_PID 0x0284 /* USB/RS422 converters: FX-USB-AW/-BD */ |
| |
| /* |
| * Definitions for B&B Electronics products. |
| */ |
| #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ |
| #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ |
| #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ |
| #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ |
| #define BANDB_USOPTL4_PID 0xAC11 |
| #define BANDB_USPTL4_PID 0xAC12 |
| #define BANDB_USO9ML2DR_2_PID 0xAC16 |
| #define BANDB_USO9ML2DR_PID 0xAC17 |
| #define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ |
| #define BANDB_USOPTL4DR_PID 0xAC19 |
| #define BANDB_485USB9F_2W_PID 0xAC25 |
| #define BANDB_485USB9F_4W_PID 0xAC26 |
| #define BANDB_232USB9M_PID 0xAC27 |
| #define BANDB_485USBTB_2W_PID 0xAC33 |
| #define BANDB_485USBTB_4W_PID 0xAC34 |
| #define BANDB_TTL5USB9M_PID 0xAC49 |
| #define BANDB_TTL3USB9M_PID 0xAC50 |
| #define BANDB_ZZ_PROG1_USB_PID 0xBA02 |
| |
| /* |
| * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI |
| */ |
| #define INTREPID_VID 0x093C |
| #define INTREPID_VALUECAN_PID 0x0601 |
| #define INTREPID_NEOVI_PID 0x0701 |
| |
| /* |
| * Definitions for ID TECH (www.idt-net.com) devices |
| */ |
| #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ |
| #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ |
| |
| /* |
| * Definitions for Omnidirectional Control Technology, Inc. devices |
| */ |
| #define OCT_VID 0x0B39 /* OCT vendor ID */ |
| /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ |
| /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ |
| /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ |
| #define OCT_DK201_PID 0x0103 /* OCT DK201 USB docking station */ |
| #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ |
| |
| /* |
| * Definitions for Icom Inc. devices |
| */ |
| #define ICOM_VID 0x0C26 /* Icom vendor ID */ |
| /* Note: ID-1 is a communications tranceiver for HAM-radio operators */ |
| #define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */ |
| /* Note: OPC is an Optional cable to connect an Icom Tranceiver */ |
| #define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */ |
| /* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */ |
| #define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */ |
| #define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */ |
| #define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/ |
| #define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */ |
| #define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */ |
| #define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */ |
| #define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */ |
| #define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */ |
| #define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */ |
| |
| /* |
| * GN Otometrics (http://www.otometrics.com) |
| * Submitted by Ville Sundberg. |
| */ |
| #define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ |
| #define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ |
| |
| /* |
| * The following are the values for the Sealevel SeaLINK+ adapters. |
| * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and |
| * removed some PIDs that don't seem to match any existing products.) |
| */ |
| #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ |
| #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ |
| #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ |
| #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ |
| #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ |
| #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ |
| #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ |
| #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ |
| #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ |
| #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ |
| #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ |
| #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ |
| #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ |
| #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ |
| #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ |
| #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ |
| #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ |
| #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ |
| #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ |
| #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ |
| #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ |
| #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ |
| #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ |
| #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ |
| #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ |
| #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ |
| #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ |
| #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ |
| #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ |
| #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ |
| #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ |
| #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ |
| #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ |
| #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ |
| #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ |
| #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ |
| #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ |
| #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ |
| #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ |
| #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ |
| #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ |
| #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ |
| #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ |
| #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ |
| #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ |
| #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ |
| #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ |
| #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ |
| #define SEALEVEL_2803R_1_PID 0Xa02a /* SeaLINK+8 (2803-ROHS) Port 1+2 */ |
| #define SEALEVEL_2803R_2_PID 0Xa02b /* SeaLINK+8 (2803-ROHS) Port 3+4 */ |
| #define SEALEVEL_2803R_3_PID 0Xa02c /* SeaLINK+8 (2803-ROHS) Port 5+6 */ |
| #define SEALEVEL_2803R_4_PID 0Xa02d /* SeaLINK+8 (2803-ROHS) Port 7+8 */ |
| |
| /* |
| * JETI SPECTROMETER SPECBOS 1201 |
| * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101 |
| */ |
| #define JETI_VID 0x0c6c |
| #define JETI_SPC1201_PID 0x04b2 |
| |
| /* |
| * FTDI USB UART chips used in construction projects from the |
| * Elektor Electronics magazine (http://www.elektor.com/) |
| */ |
| #define ELEKTOR_VID 0x0C7D |
| #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ |
| |
| /* |
| * Posiflex inc retail equipment (http://www.posiflex.com.tw) |
| */ |
| #define POSIFLEX_VID 0x0d3a /* Vendor ID */ |
| #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ |
| |
| /* |
| * The following are the values for two KOBIL chipcard terminals. |
| */ |
| #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ |
| #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ |
| #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ |
| |
| #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ |
| #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ |
| |
| /* |
| * Falcom Wireless Communications GmbH |
| */ |
| #define FALCOM_VID 0x0F94 /* Vendor Id */ |
| #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ |
| #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ |
| |
| /* Larsen and Brusgaard AltiTrack/USBtrack */ |
| #define LARSENBRUSGAARD_VID 0x0FD8 |
| #define LB_ALTITRACK_PID 0x0001 |
| |
| /* |
| * TTi (Thurlby Thandar Instruments) |
| */ |
| #define TTI_VID 0x103E /* Vendor Id */ |
| #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ |
| |
| /* |
| * Newport Cooperation (www.newport.com) |
| */ |
| #define NEWPORT_VID 0x104D |
| #define NEWPORT_AGILIS_PID 0x3000 |
| #define NEWPORT_CONEX_CC_PID 0x3002 |
| #define NEWPORT_CONEX_AGP_PID 0x3006 |
| |
| /* Interbiometrics USB I/O Board */ |
| /* Developed for Interbiometrics by Rudolf Gugler */ |
| #define INTERBIOMETRICS_VID 0x1209 |
| #define INTERBIOMETRICS_IOBOARD_PID 0x1002 |
| #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 |
| |
| /* |
| * Testo products (http://www.testo.com/) |
| * Submitted by Colin Leroy |
| */ |
| #define TESTO_VID 0x128D |
| #define TESTO_USB_INTERFACE_PID 0x0001 |
| |
| /* |
| * Mobility Electronics products. |
| */ |
| #define MOBILITY_VID 0x1342 |
| #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ |
| |
| /* |
| * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 |
| * Submitted by Harald Welte <laforge@openmoko.org> |
| */ |
| #define FIC_VID 0x1457 |
| #define FIC_NEO1973_DEBUG_PID 0x5118 |
| |
| /* Olimex */ |
| #define OLIMEX_VID 0x15BA |
| #define OLIMEX_ARM_USB_OCD_PID 0x0003 |
| #define OLIMEX_ARM_USB_OCD_H_PID 0x002b |
| |
| /* |
| * Telldus Technologies |
| */ |
| #define TELLDUS_VID 0x1781 /* Vendor ID */ |
| #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ |
| |
| /* |
| * RT Systems programming cables for various ham radios |
| */ |
| #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ |
| #define RTSYSTEMS_USB_S03_PID 0x9001 /* RTS-03 USB to Serial Adapter */ |
| #define RTSYSTEMS_USB_59_PID 0x9e50 /* USB-59 USB to 8 pin plug */ |
| #define RTSYSTEMS_USB_57A_PID 0x9e51 /* USB-57A USB to 4pin 3.5mm plug */ |
| #define RTSYSTEMS_USB_57B_PID 0x9e52 /* USB-57B USB to extended 4pin 3.5mm plug */ |
| #define RTSYSTEMS_USB_29A_PID 0x9e53 /* USB-29A USB to 3.5mm stereo plug */ |
| #define RTSYSTEMS_USB_29B_PID 0x9e54 /* USB-29B USB to 6 pin mini din */ |
| #define RTSYSTEMS_USB_29F_PID 0x9e55 /* USB-29F USB to 6 pin modular plug */ |
| #define RTSYSTEMS_USB_62B_PID 0x9e56 /* USB-62B USB to 8 pin mini din plug*/ |
| #define RTSYSTEMS_USB_S01_PID 0x9e57 /* USB-RTS01 USB to 3.5 mm stereo plug*/ |
| #define RTSYSTEMS_USB_63_PID 0x9e58 /* USB-63 USB to 9 pin female*/ |
| #define RTSYSTEMS_USB_29C_PID 0x9e59 /* USB-29C USB to 4 pin modular plug*/ |
| #define RTSYSTEMS_USB_81B_PID 0x9e5A /* USB-81 USB to 8 pin mini din plug*/ |
| #define RTSYSTEMS_USB_82B_PID 0x9e5B /* USB-82 USB to 2.5 mm stereo plug*/ |
| #define RTSYSTEMS_USB_K5D_PID 0x9e5C /* USB-K5D USB to 8 pin modular plug*/ |
| #define RTSYSTEMS_USB_K4Y_PID 0x9e5D /* USB-K4Y USB to 2.5/3.5 mm plugs*/ |
| #define RTSYSTEMS_USB_K5G_PID 0x9e5E /* USB-K5G USB to 8 pin modular plug*/ |
| #define RTSYSTEMS_USB_S05_PID 0x9e5F /* USB-RTS05 USB to 2.5 mm stereo plug*/ |
| #define RTSYSTEMS_USB_60_PID 0x9e60 /* USB-60 USB to 6 pin din*/ |
| #define RTSYSTEMS_USB_61_PID 0x9e61 /* USB-61 USB to 6 pin mini din*/ |
| #define RTSYSTEMS_USB_62_PID 0x9e62 /* USB-62 USB to 8 pin mini din*/ |
| #define RTSYSTEMS_USB_63B_PID 0x9e63 /* USB-63 USB to 9 pin female*/ |
| #define RTSYSTEMS_USB_64_PID 0x9e64 /* USB-64 USB to 9 pin male*/ |
| #define RTSYSTEMS_USB_65_PID 0x9e65 /* USB-65 USB to 9 pin female null modem*/ |
| #define RTSYSTEMS_USB_92_PID 0x9e66 /* USB-92 USB to 12 pin plug*/ |
| #define RTSYSTEMS_USB_92D_PID 0x9e67 /* USB-92D USB to 12 pin plug data*/ |
| #define RTSYSTEMS_USB_W5R_PID 0x9e68 /* USB-W5R USB to 8 pin modular plug*/ |
| #define RTSYSTEMS_USB_A5R_PID 0x9e69 /* USB-A5R USB to 8 pin modular plug*/ |
| #define RTSYSTEMS_USB_PW1_PID 0x9e6A /* USB-PW1 USB to 8 pin modular plug*/ |
| |
| /* |
| * Physik Instrumente |
| * http://www.physikinstrumente.com/en/products/ |
| */ |
| /* These two devices use the VID of FTDI */ |
| #define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */ |
| #define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */ |
| |
| #define PI_VID 0x1a72 /* Vendor ID */ |
| #define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */ |
| #define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */ |
| #define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */ |
| #define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */ |
| #define PI_C863_PID 0x1007 /* PI C-863 */ |
| #define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */ |
| #define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */ |
| #define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */ |
| #define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */ |
| #define PI_100F_PID 0x100F /* PI Digital Piezo Controller */ |
| #define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */ |
| #define PI_1012_PID 0x1012 /* PI Motion Controller */ |
| #define PI_1013_PID 0x1013 /* PI Motion Controller */ |
| #define PI_1014_PID 0x1014 /* PI Device */ |
| #define PI_1015_PID 0x1015 /* PI Device */ |
| #define PI_1016_PID 0x1016 /* PI Digital Servo Module */ |
| |
| /* |
| * Kondo Kagaku Co.Ltd. |
| * http://www.kondo-robot.com/EN |
| */ |
| #define KONDO_VID 0x165c |
| #define KONDO_USB_SERIAL_PID 0x0002 |
| |
| /* |
| * Bayer Ascensia Contour blood glucose meter USB-converter cable. |
| * http://winglucofacts.com/cables/ |
| */ |
| #define BAYER_VID 0x1A79 |
| #define BAYER_CONTOUR_CABLE_PID 0x6001 |
| |
| /* |
| * The following are the values for the Matrix Orbital FTDI Range |
| * Anything in this range will use an FT232RL. |
| */ |
| #define MTXORB_VID 0x1B3D |
| #define MTXORB_FTDI_RANGE_0100_PID 0x0100 |
| #define MTXORB_FTDI_RANGE_0101_PID 0x0101 |
| #define MTXORB_FTDI_RANGE_0102_PID 0x0102 |
| #define MTXORB_FTDI_RANGE_0103_PID 0x0103 |
| #define MTXORB_FTDI_RANGE_0104_PID 0x0104 |
| #define MTXORB_FTDI_RANGE_0105_PID 0x0105 |
| #define MTXORB_FTDI_RANGE_0106_PID 0x0106 |
| #define MTXORB_FTDI_RANGE_0107_PID 0x0107 |
| #define MTXORB_FTDI_RANGE_0108_PID 0x0108 |
| #define MTXORB_FTDI_RANGE_0109_PID 0x0109 |
| #define MTXORB_FTDI_RANGE_010A_PID 0x010A |
| #define MTXORB_FTDI_RANGE_010B_PID 0x010B |
| #define MTXORB_FTDI_RANGE_010C_PID 0x010C |
| #define MTXORB_FTDI_RANGE_010D_PID 0x010D |
| #define MTXORB_FTDI_RANGE_010E_PID 0x010E |
| #define MTXORB_FTDI_RANGE_010F_PID 0x010F |
| #define MTXORB_FTDI_RANGE_0110_PID 0x0110 |
| #define MTXORB_FTDI_RANGE_0111_PID 0x0111 |
| #define MTXORB_FTDI_RANGE_0112_PID 0x0112 |
| #define MTXORB_FTDI_RANGE_0113_PID 0x0113 |
| #define MTXORB_FTDI_RANGE_0114_PID 0x0114 |
| #define MTXORB_FTDI_RANGE_0115_PID 0x0115 |
| #define MTXORB_FTDI_RANGE_0116_PID 0x0116 |
| #define MTXORB_FTDI_RANGE_0117_PID 0x0117 |
| #define MTXORB_FTDI_RANGE_0118_PID 0x0118 |
| #define MTXORB_FTDI_RANGE_0119_PID 0x0119 |
| #define MTXORB_FTDI_RANGE_011A_PID 0x011A |
| #define MTXORB_FTDI_RANGE_011B_PID 0x011B |
| #define MTXORB_FTDI_RANGE_011C_PID 0x011C |
| #define MTXORB_FTDI_RANGE_011D_PID 0x011D |
| #define MTXORB_FTDI_RANGE_011E_PID 0x011E |
| #define MTXORB_FTDI_RANGE_011F_PID 0x011F |
| #define MTXORB_FTDI_RANGE_0120_PID 0x0120 |
| #define MTXORB_FTDI_RANGE_0121_PID 0x0121 |
| #define MTXORB_FTDI_RANGE_0122_PID 0x0122 |
| #define MTXORB_FTDI_RANGE_0123_PID 0x0123 |
| #define MTXORB_FTDI_RANGE_0124_PID 0x0124 |
| #define MTXORB_FTDI_RANGE_0125_PID 0x0125 |
| #define MTXORB_FTDI_RANGE_0126_PID 0x0126 |
| #define MTXORB_FTDI_RANGE_0127_PID 0x0127 |
| #define MTXORB_FTDI_RANGE_0128_PID 0x0128 |
| #define MTXORB_FTDI_RANGE_0129_PID 0x0129 |
| #define MTXORB_FTDI_RANGE_012A_PID 0x012A |
| #define MTXORB_FTDI_RANGE_012B_PID 0x012B |
| #define MTXORB_FTDI_RANGE_012C_PID 0x012C |
| #define MTXORB_FTDI_RANGE_012D_PID 0x012D |
| #define MTXORB_FTDI_RANGE_012E_PID 0x012E |
| #define MTXORB_FTDI_RANGE_012F_PID 0x012F |
| #define MTXORB_FTDI_RANGE_0130_PID 0x0130 |
| #define MTXORB_FTDI_RANGE_0131_PID 0x0131 |
| #define MTXORB_FTDI_RANGE_0132_PID 0x0132 |
| #define MTXORB_FTDI_RANGE_0133_PID 0x0133 |
| #define MTXORB_FTDI_RANGE_0134_PID 0x0134 |
| #define MTXORB_FTDI_RANGE_0135_PID 0x0135 |
| #define MTXORB_FTDI_RANGE_0136_PID 0x0136 |
| #define MTXORB_FTDI_RANGE_0137_PID 0x0137 |
| #define MTXORB_FTDI_RANGE_0138_PID 0x0138 |
| #define MTXORB_FTDI_RANGE_0139_PID 0x0139 |
| #define MTXORB_FTDI_RANGE_013A_PID 0x013A |
| #define MTXORB_FTDI_RANGE_013B_PID 0x013B |
| #define MTXORB_FTDI_RANGE_013C_PID 0x013C |
| #define MTXORB_FTDI_RANGE_013D_PID 0x013D |
| #define MTXORB_FTDI_RANGE_013E_PID 0x013E |
| #define MTXORB_FTDI_RANGE_013F_PID 0x013F |
| #define MTXORB_FTDI_RANGE_0140_PID 0x0140 |
| #define MTXORB_FTDI_RANGE_0141_PID 0x0141 |
| #define MTXORB_FTDI_RANGE_0142_PID 0x0142 |
| #define MTXORB_FTDI_RANGE_0143_PID 0x0143 |
| #define MTXORB_FTDI_RANGE_0144_PID 0x0144 |
| #define MTXORB_FTDI_RANGE_0145_PID 0x0145 |
| #define MTXORB_FTDI_RANGE_0146_PID 0x0146 |
| #define MTXORB_FTDI_RANGE_0147_PID 0x0147 |
| #define MTXORB_FTDI_RANGE_0148_PID 0x0148 |
| #define MTXORB_FTDI_RANGE_0149_PID 0x0149 |
| #define MTXORB_FTDI_RANGE_014A_PID 0x014A |
| #define MTXORB_FTDI_RANGE_014B_PID 0x014B |
| #define MTXORB_FTDI_RANGE_014C_PID 0x014C |
| #define MTXORB_FTDI_RANGE_014D_PID 0x014D |
| #define MTXORB_FTDI_RANGE_014E_PID 0x014E |
| #define MTXORB_FTDI_RANGE_014F_PID 0x014F |
| #define MTXORB_FTDI_RANGE_0150_PID 0x0150 |
| #define MTXORB_FTDI_RANGE_0151_PID 0x0151 |
| #define MTXORB_FTDI_RANGE_0152_PID 0x0152 |
| #define MTXORB_FTDI_RANGE_0153_PID 0x0153 |
| #define MTXORB_FTDI_RANGE_0154_PID 0x0154 |
| #define MTXORB_FTDI_RANGE_0155_PID 0x0155 |
| #define MTXORB_FTDI_RANGE_0156_PID 0x0156 |
| #define MTXORB_FTDI_RANGE_0157_PID 0x0157 |
| #define MTXORB_FTDI_RANGE_0158_PID 0x0158 |
| #define MTXORB_FTDI_RANGE_0159_PID 0x0159 |
| #define MTXORB_FTDI_RANGE_015A_PID 0x015A |
| #define MTXORB_FTDI_RANGE_015B_PID 0x015B |
| #define MTXORB_FTDI_RANGE_015C_PID 0x015C |
| #define MTXORB_FTDI_RANGE_015D_PID 0x015D |
| #define MTXORB_FTDI_RANGE_015E_PID 0x015E |
| #define MTXORB_FTDI_RANGE_015F_PID 0x015F |
| #define MTXORB_FTDI_RANGE_0160_PID 0x0160 |
| #define MTXORB_FTDI_RANGE_0161_PID 0x0161 |
| #define MTXORB_FTDI_RANGE_0162_PID 0x0162 |
| #define MTXORB_FTDI_RANGE_0163_PID 0x0163 |
| #define MTXORB_FTDI_RANGE_0164_PID 0x0164 |
| #define MTXORB_FTDI_RANGE_0165_PID 0x0165 |
| #define MTXORB_FTDI_RANGE_0166_PID 0x0166 |
| #define MTXORB_FTDI_RANGE_0167_PID 0x0167 |
| #define MTXORB_FTDI_RANGE_0168_PID 0x0168 |
| #define MTXORB_FTDI_RANGE_0169_PID 0x0169 |
| #define MTXORB_FTDI_RANGE_016A_PID 0x016A |
| #define MTXORB_FTDI_RANGE_016B_PID 0x016B |
| #define MTXORB_FTDI_RANGE_016C_PID 0x016C |
| #define MTXORB_FTDI_RANGE_016D_PID 0x016D |
| #define MTXORB_FTDI_RANGE_016E_PID 0x016E |
| #define MTXORB_FTDI_RANGE_016F_PID 0x016F |
| #define MTXORB_FTDI_RANGE_0170_PID 0x0170 |
| #define MTXORB_FTDI_RANGE_0171_PID 0x0171 |
| #define MTXORB_FTDI_RANGE_0172_PID 0x0172 |
| #define MTXORB_FTDI_RANGE_0173_PID 0x0173 |
| #define MTXORB_FTDI_RANGE_0174_PID 0x0174 |
| #define MTXORB_FTDI_RANGE_0175_PID 0x0175 |
| #define MTXORB_FTDI_RANGE_0176_PID 0x0176 |
| #define MTXORB_FTDI_RANGE_0177_PID 0x0177 |
| #define MTXORB_FTDI_RANGE_0178_PID 0x0178 |
| #define MTXORB_FTDI_RANGE_0179_PID 0x0179 |
| #define MTXORB_FTDI_RANGE_017A_PID 0x017A |
| #define MTXORB_FTDI_RANGE_017B_PID 0x017B |
| #define MTXORB_FTDI_RANGE_017C_PID 0x017C |
| #define MTXORB_FTDI_RANGE_017D_PID 0x017D |
| #define MTXORB_FTDI_RANGE_017E_PID 0x017E |
| #define MTXORB_FTDI_RANGE_017F_PID 0x017F |
| #define MTXORB_FTDI_RANGE_0180_PID 0x0180 |
| #define MTXORB_FTDI_RANGE_0181_PID 0x0181 |
| #define MTXORB_FTDI_RANGE_0182_PID 0x0182 |
| #define MTXORB_FTDI_RANGE_0183_PID 0x0183 |
| #define MTXORB_FTDI_RANGE_0184_PID 0x0184 |
| #define MTXORB_FTDI_RANGE_0185_PID 0x0185 |
| #define MTXORB_FTDI_RANGE_0186_PID 0x0186 |
| #define MTXORB_FTDI_RANGE_0187_PID 0x0187 |
| #define MTXORB_FTDI_RANGE_0188_PID 0x0188 |
| #define MTXORB_FTDI_RANGE_0189_PID 0x0189 |
| #define MTXORB_FTDI_RANGE_018A_PID 0x018A |
| #define MTXORB_FTDI_RANGE_018B_PID 0x018B |
| #define MTXORB_FTDI_RANGE_018C_PID 0x018C |
| #define MTXORB_FTDI_RANGE_018D_PID 0x018D |
| #define MTXORB_FTDI_RANGE_018E_PID 0x018E |
| #define MTXORB_FTDI_RANGE_018F_PID 0x018F |
| #define MTXORB_FTDI_RANGE_0190_PID 0x0190 |
| #define MTXORB_FTDI_RANGE_0191_PID 0x0191 |
| #define MTXORB_FTDI_RANGE_0192_PID 0x0192 |
| #define MTXORB_FTDI_RANGE_0193_PID 0x0193 |
| #define MTXORB_FTDI_RANGE_0194_PID 0x0194 |
| #define MTXORB_FTDI_RANGE_0195_PID 0x0195 |
| #define MTXORB_FTDI_RANGE_0196_PID 0x0196 |
| #define MTXORB_FTDI_RANGE_0197_PID 0x0197 |
| #define MTXORB_FTDI_RANGE_0198_PID 0x0198 |
| #define MTXORB_FTDI_RANGE_0199_PID 0x0199 |
| #define MTXORB_FTDI_RANGE_019A_PID 0x019A |
| #define MTXORB_FTDI_RANGE_019B_PID 0x019B |
| #define MTXORB_FTDI_RANGE_019C_PID 0x019C |
| #define MTXORB_FTDI_RANGE_019D_PID 0x019D |
| #define MTXORB_FTDI_RANGE_019E_PID 0x019E |
| #define MTXORB_FTDI_RANGE_019F_PID 0x019F |
| #define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 |
| #define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 |
| #define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 |
| #define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 |
| #define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 |
| #define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 |
| #define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 |
| #define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 |
| #define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 |
| #define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 |
| #define MTXORB_FTDI_RANGE_01AA_PID 0x01AA |
| #define MTXORB_FTDI_RANGE_01AB_PID 0x01AB |
| #define MTXORB_FTDI_RANGE_01AC_PID 0x01AC |
| #define MTXORB_FTDI_RANGE_01AD_PID 0x01AD |
| #define MTXORB_FTDI_RANGE_01AE_PID 0x01AE |
| #define MTXORB_FTDI_RANGE_01AF_PID 0x01AF |
| #define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 |
| #define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 |
| #define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 |
| #define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 |
| #define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 |
| #define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 |
| #define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 |
| #define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 |
| #define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 |
| #define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 |
| #define MTXORB_FTDI_RANGE_01BA_PID 0x01BA |
| #define MTXORB_FTDI_RANGE_01BB_PID 0x01BB |
| #define MTXORB_FTDI_RANGE_01BC_PID 0x01BC |
| #define MTXORB_FTDI_RANGE_01BD_PID 0x01BD |
| #define MTXORB_FTDI_RANGE_01BE_PID 0x01BE |
| #define MTXORB_FTDI_RANGE_01BF_PID 0x01BF |
| #define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 |
| #define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 |
| #define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 |
| #define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 |
| #define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 |
| #define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 |
| #define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 |
| #define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 |
| #define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 |
| #define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 |
| #define MTXORB_FTDI_RANGE_01CA_PID 0x01CA |
| #define MTXORB_FTDI_RANGE_01CB_PID 0x01CB |
| #define MTXORB_FTDI_RANGE_01CC_PID 0x01CC |
| #define MTXORB_FTDI_RANGE_01CD_PID 0x01CD |
| #define MTXORB_FTDI_RANGE_01CE_PID 0x01CE |
| #define MTXORB_FTDI_RANGE_01CF_PID 0x01CF |
| #define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 |
| #define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 |
| #define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 |
| #define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 |
| #define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 |
| #define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 |
| #define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 |
| #define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 |
| #define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 |
| #define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 |
| #define MTXORB_FTDI_RANGE_01DA_PID 0x01DA |
| #define MTXORB_FTDI_RANGE_01DB_PID 0x01DB |
| #define MTXORB_FTDI_RANGE_01DC_PID 0x01DC |
| #define MTXORB_FTDI_RANGE_01DD_PID 0x01DD |
| #define MTXORB_FTDI_RANGE_01DE_PID 0x01DE |
| #define MTXORB_FTDI_RANGE_01DF_PID 0x01DF |
| #define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 |
| #define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 |
| #define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 |
| #define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 |
| #define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 |
| #define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 |
| #define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 |
| #define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 |
| #define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 |
| #define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 |
| #define MTXORB_FTDI_RANGE_01EA_PID 0x01EA |
| #define MTXORB_FTDI_RANGE_01EB_PID 0x01EB |
| #define MTXORB_FTDI_RANGE_01EC_PID 0x01EC |
| #define MTXORB_FTDI_RANGE_01ED_PID 0x01ED |
| #define MTXORB_FTDI_RANGE_01EE_PID 0x01EE |
| #define MTXORB_FTDI_RANGE_01EF_PID 0x01EF |
| #define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 |
| #define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 |
| #define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 |
| #define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 |
| #define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 |
| #define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 |
| #define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 |
| #define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 |
| #define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 |
| #define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 |
| #define MTXORB_FTDI_RANGE_01FA_PID 0x01FA |
| #define MTXORB_FTDI_RANGE_01FB_PID 0x01FB |
| #define MTXORB_FTDI_RANGE_01FC_PID 0x01FC |
| #define MTXORB_FTDI_RANGE_01FD_PID 0x01FD |
| #define MTXORB_FTDI_RANGE_01FE_PID 0x01FE |
| #define MTXORB_FTDI_RANGE_01FF_PID 0x01FF |
| |
| |
| |
| /* |
| * The Mobility Lab (TML) |
| * Submitted by Pierre Castella |
| */ |
| #define TML_VID 0x1B91 /* Vendor ID */ |
| #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ |
| |
| /* Alti-2 products http://www.alti-2.com */ |
| #define ALTI2_VID 0x1BC9 |
| #define ALTI2_N3_PID 0x6001 /* Neptune 3 */ |
| |
| /* |
| * Ionics PlugComputer |
| */ |
| #define IONICS_VID 0x1c0c |
| #define IONICS_PLUGCOMPUTER_PID 0x0102 |
| |
| /* |
| * Dresden Elektronik Sensor Terminal Board |
| */ |
| #define DE_VID 0x1cf1 /* Vendor ID */ |
| #define STB_PID 0x0001 /* Sensor Terminal Board */ |
| #define WHT_PID 0x0004 /* Wireless Handheld Terminal */ |
| |
| /* |
| * STMicroelectonics |
| */ |
| #define ST_VID 0x0483 |
| #define ST_STMCLT_2232_PID 0x3746 |
| #define ST_STMCLT_4232_PID 0x3747 |
| |
| /* |
| * Papouch products (http://www.papouch.com/) |
| * Submitted by Folkert van Heusden |
| */ |
| |
| #define PAPOUCH_VID 0x5050 /* Vendor ID */ |
| #define PAPOUCH_SB485_PID 0x0100 /* Papouch SB485 USB-485/422 Converter */ |
| #define PAPOUCH_AP485_PID 0x0101 /* AP485 USB-RS485 Converter */ |
| #define PAPOUCH_SB422_PID 0x0102 /* Papouch SB422 USB-RS422 Converter */ |
| #define PAPOUCH_SB485_2_PID 0x0103 /* Papouch SB485 USB-485/422 Converter */ |
| #define PAPOUCH_AP485_2_PID 0x0104 /* AP485 USB-RS485 Converter */ |
| #define PAPOUCH_SB422_2_PID 0x0105 /* Papouch SB422 USB-RS422 Converter */ |
| #define PAPOUCH_SB485S_PID 0x0106 /* Papouch SB485S USB-485/422 Converter */ |
| #define PAPOUCH_SB485C_PID 0x0107 /* Papouch SB485C USB-485/422 Converter */ |
| #define PAPOUCH_LEC_PID 0x0300 /* LEC USB Converter */ |
| #define PAPOUCH_SB232_PID 0x0301 /* Papouch SB232 USB-RS232 Converter */ |
| #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ |
| #define PAPOUCH_IRAMP_PID 0x0500 /* Papouch IRAmp Duplex */ |
| #define PAPOUCH_DRAK5_PID 0x0700 /* Papouch DRAK5 */ |
| #define PAPOUCH_QUIDO8x8_PID 0x0800 /* Papouch Quido 8/8 Module */ |
| #define PAPOUCH_QUIDO4x4_PID 0x0900 /* Papouch Quido 4/4 Module */ |
| #define PAPOUCH_QUIDO2x2_PID 0x0a00 /* Papouch Quido 2/2 Module */ |
| #define PAPOUCH_QUIDO10x1_PID 0x0b00 /* Papouch Quido 10/1 Module */ |
| #define PAPOUCH_QUIDO30x3_PID 0x0c00 /* Papouch Quido 30/3 Module */ |
| #define PAPOUCH_QUIDO60x3_PID 0x0d00 /* Papouch Quido 60(100)/3 Module */ |
| #define PAPOUCH_QUIDO2x16_PID 0x0e00 /* Papouch Quido 2/16 Module */ |
| #define PAPOUCH_QUIDO3x32_PID 0x0f00 /* Papouch Quido 3/32 Module */ |
| #define PAPOUCH_DRAK6_PID 0x1000 /* Papouch DRAK6 */ |
| #define PAPOUCH_UPSUSB_PID 0x8000 /* Papouch UPS-USB adapter */ |
| #define PAPOUCH_MU_PID 0x8001 /* MU controller */ |
| #define PAPOUCH_SIMUKEY_PID 0x8002 /* Papouch SimuKey */ |
| #define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */ |
| #define PAPOUCH_GMUX_PID 0x8004 /* Papouch GOLIATH MUX */ |
| #define PAPOUCH_GMSR_PID 0x8005 /* Papouch GOLIATH MSR */ |
| |
| /* |
| * Marvell SheevaPlug |
| */ |
| #define MARVELL_VID 0x9e88 |
| #define MARVELL_SHEEVAPLUG_PID 0x9e8f |
| |
| /* |
| * Evolution Robotics products (http://www.evolution.com/). |
| * Submitted by Shawn M. Lavelle. |
| */ |
| #define EVOLUTION_VID 0xDEEE /* Vendor ID */ |
| #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ |
| #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ |
| #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ |
| #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ |
| |
| /* |
| * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403) |
| */ |
| #define MJSG_GENERIC_PID 0x9378 |
| #define MJSG_SR_RADIO_PID 0x9379 |
| #define MJSG_XM_RADIO_PID 0x937A |
| #define MJSG_HD_RADIO_PID 0x937C |
| |
| /* |
| * D.O.Tec products (http://www.directout.eu) |
| */ |
| #define FTDI_DOTEC_PID 0x9868 |
| |
| /* |
| * Xverve Signalyzer tools (http://www.signalyzer.com/) |
| */ |
| #define XVERVE_SIGNALYZER_ST_PID 0xBCA0 |
| #define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1 |
| #define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 |
| #define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 |
| |
| /* |
| * Segway Robotic Mobility Platform USB interface (using VID 0x0403) |
| * Submitted by John G. Rogers |
| */ |
| #define SEGWAY_RMP200_PID 0xe729 |
| |
| |
| /* |
| * Accesio USB Data Acquisition products (http://www.accesio.com/) |
| */ |
| #define ACCESIO_COM4SM_PID 0xD578 |
| |
| /* www.sciencescope.co.uk educational dataloggers */ |
| #define FTDI_SCIENCESCOPE_LOGBOOKML_PID 0xFF18 |
| #define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID 0xFF1C |
| #define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID 0xFF1D |
| |
| /* |
| * Milkymist One JTAG/Serial |
| */ |
| #define QIHARDWARE_VID 0x20B7 |
| #define MILKYMISTONE_JTAGSERIAL_PID 0x0713 |
| |
| /* |
| * CTI GmbH RS485 Converter http://www.cti-lean.com/ |
| */ |
| /* USB-485-Mini*/ |
| #define FTDI_CTI_MINI_PID 0xF608 |
| /* USB-Nano-485*/ |
| #define FTDI_CTI_NANO_PID 0xF60B |
| |
| /* |
| * ZeitControl cardsystems GmbH rfid-readers http://zeitconrol.de |
| */ |
| /* TagTracer MIFARE*/ |
| #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0 |
| |
| /* |
| * Rainforest Automation |
| */ |
| /* ZigBee controller */ |
| #define FTDI_RF_R106 0x8A28 |
| |
| /* |
| * Product: HCP HIT GPRS modem |
| * Manufacturer: HCP d.o.o. |
| * ATI command output: Cinterion MC55i |
| */ |
| #define FTDI_CINTERION_MC55I_PID 0xA951 |
| |
| /* |
| * Product: Comet Caller ID decoder |
| * Manufacturer: Crucible Technologies |
| */ |
| #define FTDI_CT_COMET_PID 0x8e08 |
| |
| /* |
| * Product: Z3X Box |
| * Manufacturer: Smart GSM Team |
| */ |
| #define FTDI_Z3X_PID 0x0011 |
| |
| /* |
| * Product: Cressi PC Interface |
| * Manufacturer: Cressi |
| */ |
| #define FTDI_CRESSI_PID 0x87d0 |