usb: dwc3: make HIRD threshold configurable
HIRD threshold should be configurable by different platforms.
From DesignWare databook:
When HIRD_Threshold[4] is set to 1b1 and HIRD value is greater than or
equal to the value in HIRD_Threshold[3:0], dwc3 asserts output signals
utmi_l1_suspend_n to put PHY into Deep Low-Power mode in L1.
When HIRD_Threshold[4] is set to 1b0 or the HIRD value is less than
HIRD_Threshold[3:0], dwc3 asserts output signals utmi_sleep_n on L1.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index cf86d30..4bb9aa6 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -675,12 +675,16 @@
* @test_mode: true when we're entering a USB test mode
* @test_mode_nr: test feature selector
* @lpm_nyet_threshold: LPM NYET response threshold
+ * @hird_threshold: HIRD threshold
* @delayed_status: true when gadget driver asks for delayed status
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
* @has_hibernation: true when dwc3 was configured with Hibernation
* @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
* there's now way for software to detect this in runtime.
+ * @is_utmi_l1_suspend: the core asserts output signal
+ * 0 - utmi_sleep_n
+ * 1 - utmi_l1_suspend_n
* @is_selfpowered: true when we are selfpowered
* @is_fpga: true when we are using the FPGA board
* @needs_fifo_resize: not all users might want fifo resizing, flag it
@@ -797,12 +801,14 @@
u8 test_mode;
u8 test_mode_nr;
u8 lpm_nyet_threshold;
+ u8 hird_threshold;
unsigned delayed_status:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
unsigned has_hibernation:1;
unsigned has_lpm_erratum:1;
+ unsigned is_utmi_l1_suspend:1;
unsigned is_selfpowered:1;
unsigned is_fpga:1;
unsigned needs_fifo_resize:1;