| /* |
| * sch311x_wdt.c - Driver for the SCH311x Super-I/O chips |
| * integrated watchdog. |
| * |
| * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor |
| * provide warranty for any of this software. This material is |
| * provided "AS-IS" and at no charge. |
| */ |
| |
| /* |
| * Includes, defines, variables, module parameters, ... |
| */ |
| |
| /* Includes */ |
| #include <linux/module.h> /* For module specific items */ |
| #include <linux/moduleparam.h> /* For new moduleparam's */ |
| #include <linux/types.h> /* For standard types (like size_t) */ |
| #include <linux/errno.h> /* For the -ENODEV/... values */ |
| #include <linux/kernel.h> /* For printk/... */ |
| #include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV |
| (WATCHDOG_MINOR) */ |
| #include <linux/watchdog.h> /* For the watchdog specific items */ |
| #include <linux/init.h> /* For __init/__exit/... */ |
| #include <linux/fs.h> /* For file operations */ |
| #include <linux/platform_device.h> /* For platform_driver framework */ |
| #include <linux/ioport.h> /* For io-port access */ |
| #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ |
| #include <linux/uaccess.h> /* For copy_to_user/put_user/... */ |
| #include <linux/io.h> /* For inb/outb/... */ |
| |
| /* Module and version information */ |
| #define DRV_NAME "sch311x_wdt" |
| #define PFX DRV_NAME ": " |
| |
| /* Runtime registers */ |
| #define RESGEN 0x1d |
| #define GP60 0x47 |
| #define WDT_TIME_OUT 0x65 |
| #define WDT_VAL 0x66 |
| #define WDT_CFG 0x67 |
| #define WDT_CTRL 0x68 |
| |
| /* internal variables */ |
| static unsigned long sch311x_wdt_is_open; |
| static char sch311x_wdt_expect_close; |
| static struct platform_device *sch311x_wdt_pdev; |
| |
| static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e, 0x00 }; |
| |
| static struct { /* The devices private data */ |
| /* the Runtime Register base address */ |
| unsigned short runtime_reg; |
| /* The card's boot status */ |
| int boot_status; |
| /* the lock for io operations */ |
| spinlock_t io_lock; |
| } sch311x_wdt_data; |
| |
| /* Module load parameters */ |
| static unsigned short force_id; |
| module_param(force_id, ushort, 0); |
| MODULE_PARM_DESC(force_id, "Override the detected device ID"); |
| |
| static unsigned short therm_trip; |
| module_param(therm_trip, ushort, 0); |
| MODULE_PARM_DESC(therm_trip, "Should a ThermTrip trigger the reset generator"); |
| |
| #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ |
| static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, |
| "Watchdog timeout in seconds. 1<= timeout <=15300, default=" |
| __MODULE_STRING(WATCHDOG_TIMEOUT) "."); |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| /* |
| * Super-IO functions |
| */ |
| |
| static inline void sch311x_sio_enter(int sio_config_port) |
| { |
| outb(0x55, sio_config_port); |
| } |
| |
| static inline void sch311x_sio_exit(int sio_config_port) |
| { |
| outb(0xaa, sio_config_port); |
| } |
| |
| static inline int sch311x_sio_inb(int sio_config_port, int reg) |
| { |
| outb(reg, sio_config_port); |
| return inb(sio_config_port + 1); |
| } |
| |
| static inline void sch311x_sio_outb(int sio_config_port, int reg, int val) |
| { |
| outb(reg, sio_config_port); |
| outb(val, sio_config_port + 1); |
| } |
| |
| /* |
| * Watchdog Operations |
| */ |
| |
| static void sch311x_wdt_set_timeout(int t) |
| { |
| unsigned char timeout_unit = 0x80; |
| |
| /* When new timeout is bigger then 255 seconds, we will use minutes */ |
| if (t > 255) { |
| timeout_unit = 0; |
| t /= 60; |
| } |
| |
| /* -- Watchdog Timeout -- |
| * Bit 0-6 (Reserved) |
| * Bit 7 WDT Time-out Value Units Select |
| * (0 = Minutes, 1 = Seconds) |
| */ |
| outb(timeout_unit, sch311x_wdt_data.runtime_reg + WDT_TIME_OUT); |
| |
| /* -- Watchdog Timer Time-out Value -- |
| * Bit 0-7 Binary coded units (0=Disabled, 1..255) |
| */ |
| outb(t, sch311x_wdt_data.runtime_reg + WDT_VAL); |
| } |
| |
| static void sch311x_wdt_start(void) |
| { |
| spin_lock(&sch311x_wdt_data.io_lock); |
| |
| /* set watchdog's timeout */ |
| sch311x_wdt_set_timeout(timeout); |
| /* enable the watchdog */ |
| /* -- General Purpose I/O Bit 6.0 -- |
| * Bit 0, In/Out: 0 = Output, 1 = Input |
| * Bit 1, Polarity: 0 = No Invert, 1 = Invert |
| * Bit 2-3, Function select: 00 = GPI/O, 01 = LED1, 11 = WDT, |
| * 10 = Either Edge Triggered Intr.4 |
| * Bit 4-6 (Reserved) |
| * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain |
| */ |
| outb(0x0e, sch311x_wdt_data.runtime_reg + GP60); |
| |
| spin_unlock(&sch311x_wdt_data.io_lock); |
| |
| } |
| |
| static void sch311x_wdt_stop(void) |
| { |
| spin_lock(&sch311x_wdt_data.io_lock); |
| |
| /* stop the watchdog */ |
| outb(0x01, sch311x_wdt_data.runtime_reg + GP60); |
| /* disable timeout by setting it to 0 */ |
| sch311x_wdt_set_timeout(0); |
| |
| spin_unlock(&sch311x_wdt_data.io_lock); |
| } |
| |
| static void sch311x_wdt_keepalive(void) |
| { |
| spin_lock(&sch311x_wdt_data.io_lock); |
| sch311x_wdt_set_timeout(timeout); |
| spin_unlock(&sch311x_wdt_data.io_lock); |
| } |
| |
| static int sch311x_wdt_set_heartbeat(int t) |
| { |
| if (t < 1 || t > (255*60)) |
| return -EINVAL; |
| |
| /* When new timeout is bigger then 255 seconds, |
| * we will round up to minutes (with a max of 255) */ |
| if (t > 255) |
| t = (((t - 1) / 60) + 1) * 60; |
| |
| timeout = t; |
| return 0; |
| } |
| |
| static void sch311x_wdt_get_status(int *status) |
| { |
| unsigned char new_status; |
| |
| *status = 0; |
| |
| spin_lock(&sch311x_wdt_data.io_lock); |
| |
| /* -- Watchdog timer control -- |
| * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured |
| * Bit 1 Reserved |
| * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) |
| * Bit 3 P20 Force Timeout enabled: |
| * 0 = P20 activity does not generate the WD timeout event |
| * 1 = P20 Allows rising edge of P20, from the keyboard |
| * controller, to force the WD timeout event. |
| * Bit 4-7 Reserved |
| */ |
| new_status = inb(sch311x_wdt_data.runtime_reg + WDT_CTRL); |
| if (new_status & 0x01) |
| *status |= WDIOF_CARDRESET; |
| |
| spin_unlock(&sch311x_wdt_data.io_lock); |
| } |
| |
| /* |
| * /dev/watchdog handling |
| */ |
| |
| static ssize_t sch311x_wdt_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| if (count) { |
| if (!nowayout) { |
| size_t i; |
| |
| sch311x_wdt_expect_close = 0; |
| |
| for (i = 0; i != count; i++) { |
| char c; |
| if (get_user(c, buf + i)) |
| return -EFAULT; |
| if (c == 'V') |
| sch311x_wdt_expect_close = 42; |
| } |
| } |
| sch311x_wdt_keepalive(); |
| } |
| return count; |
| } |
| |
| static long sch311x_wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int status; |
| int new_timeout; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| static const struct watchdog_info ident = { |
| .options = WDIOF_KEEPALIVEPING | |
| WDIOF_SETTIMEOUT | |
| WDIOF_MAGICCLOSE, |
| .firmware_version = 1, |
| .identity = DRV_NAME, |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| if (copy_to_user(argp, &ident, sizeof(ident))) |
| return -EFAULT; |
| break; |
| |
| case WDIOC_GETSTATUS: |
| { |
| sch311x_wdt_get_status(&status); |
| return put_user(status, p); |
| } |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(sch311x_wdt_data.boot_status, p); |
| |
| case WDIOC_SETOPTIONS: |
| { |
| int options, retval = -EINVAL; |
| |
| if (get_user(options, p)) |
| return -EFAULT; |
| if (options & WDIOS_DISABLECARD) { |
| sch311x_wdt_stop(); |
| retval = 0; |
| } |
| if (options & WDIOS_ENABLECARD) { |
| sch311x_wdt_start(); |
| retval = 0; |
| } |
| return retval; |
| } |
| case WDIOC_KEEPALIVE: |
| sch311x_wdt_keepalive(); |
| break; |
| |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_timeout, p)) |
| return -EFAULT; |
| if (sch311x_wdt_set_heartbeat(new_timeout)) |
| return -EINVAL; |
| sch311x_wdt_keepalive(); |
| /* Fall */ |
| case WDIOC_GETTIMEOUT: |
| return put_user(timeout, p); |
| default: |
| return -ENOTTY; |
| } |
| return 0; |
| } |
| |
| static int sch311x_wdt_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(0, &sch311x_wdt_is_open)) |
| return -EBUSY; |
| /* |
| * Activate |
| */ |
| sch311x_wdt_start(); |
| return nonseekable_open(inode, file); |
| } |
| |
| static int sch311x_wdt_close(struct inode *inode, struct file *file) |
| { |
| if (sch311x_wdt_expect_close == 42) { |
| sch311x_wdt_stop(); |
| } else { |
| printk(KERN_CRIT PFX |
| "Unexpected close, not stopping watchdog!\n"); |
| sch311x_wdt_keepalive(); |
| } |
| clear_bit(0, &sch311x_wdt_is_open); |
| sch311x_wdt_expect_close = 0; |
| return 0; |
| } |
| |
| /* |
| * Kernel Interfaces |
| */ |
| |
| static const struct file_operations sch311x_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = sch311x_wdt_write, |
| .unlocked_ioctl = sch311x_wdt_ioctl, |
| .open = sch311x_wdt_open, |
| .release = sch311x_wdt_close, |
| }; |
| |
| static struct miscdevice sch311x_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &sch311x_wdt_fops, |
| }; |
| |
| /* |
| * Init & exit routines |
| */ |
| |
| static int __devinit sch311x_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| unsigned char val; |
| int err; |
| |
| spin_lock_init(&sch311x_wdt_data.io_lock); |
| |
| if (!request_region(sch311x_wdt_data.runtime_reg + RESGEN, 1, |
| DRV_NAME)) { |
| dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", |
| sch311x_wdt_data.runtime_reg + RESGEN, |
| sch311x_wdt_data.runtime_reg + RESGEN); |
| err = -EBUSY; |
| goto exit; |
| } |
| |
| if (!request_region(sch311x_wdt_data.runtime_reg + GP60, 1, DRV_NAME)) { |
| dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", |
| sch311x_wdt_data.runtime_reg + GP60, |
| sch311x_wdt_data.runtime_reg + GP60); |
| err = -EBUSY; |
| goto exit_release_region; |
| } |
| |
| if (!request_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4, |
| DRV_NAME)) { |
| dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", |
| sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, |
| sch311x_wdt_data.runtime_reg + WDT_CTRL); |
| err = -EBUSY; |
| goto exit_release_region2; |
| } |
| |
| /* Make sure that the watchdog is not running */ |
| sch311x_wdt_stop(); |
| |
| /* Disable keyboard and mouse interaction and interrupt */ |
| /* -- Watchdog timer configuration -- |
| * Bit 0 Reserved |
| * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. |
| * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr |
| * Bit 3 Reserved |
| * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, |
| * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) |
| */ |
| outb(0, sch311x_wdt_data.runtime_reg + WDT_CFG); |
| |
| /* Check that the heartbeat value is within it's range ; |
| * if not reset to the default */ |
| if (sch311x_wdt_set_heartbeat(timeout)) { |
| sch311x_wdt_set_heartbeat(WATCHDOG_TIMEOUT); |
| dev_info(dev, "timeout value must be 1<=x<=15300, using %d\n", |
| timeout); |
| } |
| |
| /* Get status at boot */ |
| sch311x_wdt_get_status(&sch311x_wdt_data.boot_status); |
| |
| /* enable watchdog */ |
| /* -- Reset Generator -- |
| * Bit 0 Enable Watchdog Timer Generation: 0* = Enabled, 1 = Disabled |
| * Bit 1 Thermtrip Source Select: O* = No Source, 1 = Source |
| * Bit 2 WDT2_CTL: WDT input bit |
| * Bit 3-7 Reserved |
| */ |
| outb(0, sch311x_wdt_data.runtime_reg + RESGEN); |
| val = therm_trip ? 0x06 : 0x04; |
| outb(val, sch311x_wdt_data.runtime_reg + RESGEN); |
| |
| sch311x_wdt_miscdev.parent = dev; |
| |
| err = misc_register(&sch311x_wdt_miscdev); |
| if (err != 0) { |
| dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, err); |
| goto exit_release_region3; |
| } |
| |
| dev_info(dev, |
| "SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n", |
| timeout, nowayout); |
| |
| return 0; |
| |
| exit_release_region3: |
| release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4); |
| exit_release_region2: |
| release_region(sch311x_wdt_data.runtime_reg + GP60, 1); |
| exit_release_region: |
| release_region(sch311x_wdt_data.runtime_reg + RESGEN, 1); |
| sch311x_wdt_data.runtime_reg = 0; |
| exit: |
| return err; |
| } |
| |
| static int __devexit sch311x_wdt_remove(struct platform_device *pdev) |
| { |
| /* Stop the timer before we leave */ |
| if (!nowayout) |
| sch311x_wdt_stop(); |
| |
| /* Deregister */ |
| misc_deregister(&sch311x_wdt_miscdev); |
| release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4); |
| release_region(sch311x_wdt_data.runtime_reg + GP60, 1); |
| release_region(sch311x_wdt_data.runtime_reg + RESGEN, 1); |
| sch311x_wdt_data.runtime_reg = 0; |
| return 0; |
| } |
| |
| static void sch311x_wdt_shutdown(struct platform_device *dev) |
| { |
| /* Turn the WDT off if we have a soft shutdown */ |
| sch311x_wdt_stop(); |
| } |
| |
| #define sch311x_wdt_suspend NULL |
| #define sch311x_wdt_resume NULL |
| |
| static struct platform_driver sch311x_wdt_driver = { |
| .probe = sch311x_wdt_probe, |
| .remove = __devexit_p(sch311x_wdt_remove), |
| .shutdown = sch311x_wdt_shutdown, |
| .suspend = sch311x_wdt_suspend, |
| .resume = sch311x_wdt_resume, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = DRV_NAME, |
| }, |
| }; |
| |
| static int __init sch311x_detect(int sio_config_port, unsigned short *addr) |
| { |
| int err = 0, reg; |
| unsigned short base_addr; |
| unsigned char dev_id; |
| |
| sch311x_sio_enter(sio_config_port); |
| |
| /* Check device ID. We currently know about: |
| * SCH3112 (0x7c), SCH3114 (0x7d), and SCH3116 (0x7f). */ |
| reg = force_id ? force_id : sch311x_sio_inb(sio_config_port, 0x20); |
| if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) { |
| err = -ENODEV; |
| goto exit; |
| } |
| dev_id = reg == 0x7c ? 2 : reg == 0x7d ? 4 : 6; |
| |
| /* Select logical device A (runtime registers) */ |
| sch311x_sio_outb(sio_config_port, 0x07, 0x0a); |
| |
| /* Check if Logical Device Register is currently active */ |
| if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0) |
| printk(KERN_INFO PFX "Seems that LDN 0x0a is not active...\n"); |
| |
| /* Get the base address of the runtime registers */ |
| base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | |
| sch311x_sio_inb(sio_config_port, 0x61); |
| if (!base_addr) { |
| printk(KERN_ERR PFX "Base address not set.\n"); |
| err = -ENODEV; |
| goto exit; |
| } |
| *addr = base_addr; |
| |
| printk(KERN_INFO PFX "Found an SMSC SCH311%d chip at 0x%04x\n", |
| dev_id, base_addr); |
| |
| exit: |
| sch311x_sio_exit(sio_config_port); |
| return err; |
| } |
| |
| static int __init sch311x_wdt_init(void) |
| { |
| int err, i, found = 0; |
| unsigned short addr = 0; |
| |
| for (i = 0; !found && sch311x_ioports[i]; i++) |
| if (sch311x_detect(sch311x_ioports[i], &addr) == 0) |
| found++; |
| |
| if (!found) |
| return -ENODEV; |
| |
| sch311x_wdt_data.runtime_reg = addr; |
| |
| err = platform_driver_register(&sch311x_wdt_driver); |
| if (err) |
| return err; |
| |
| sch311x_wdt_pdev = platform_device_register_simple(DRV_NAME, addr, |
| NULL, 0); |
| |
| if (IS_ERR(sch311x_wdt_pdev)) { |
| err = PTR_ERR(sch311x_wdt_pdev); |
| goto unreg_platform_driver; |
| } |
| |
| return 0; |
| |
| unreg_platform_driver: |
| platform_driver_unregister(&sch311x_wdt_driver); |
| return err; |
| } |
| |
| static void __exit sch311x_wdt_exit(void) |
| { |
| platform_device_unregister(sch311x_wdt_pdev); |
| platform_driver_unregister(&sch311x_wdt_driver); |
| } |
| |
| module_init(sch311x_wdt_init); |
| module_exit(sch311x_wdt_exit); |
| |
| MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); |
| MODULE_DESCRIPTION("SMSC SCH311x WatchDog Timer Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |
| |