drivers/irqchip/irq-sifive-plic.c - kernel/msm-5.4 - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017 SiFive
  * Copyright (C) 2018 Christoph Hellwig
  */
 #define pr_fmt(fmt) "plic: " fmt
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <asm/smp.h>

 /*
  * This driver implements a version of the RISC-V PLIC with the actual layout
  * specified in chapter 8 of the SiFive U5 Coreplex Series Manual:
  *
  *     https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
  *
  * The largest number supported by devices marked as 'sifive,plic-1.0.0', is
  * 1024, of which device 0 is defined as non-existent by the RISC-V Privileged
  * Spec.
  */

 #define MAX_DEVICES			1024
 #define MAX_CONTEXTS			15872

 /*
  * Each interrupt source has a priority register associated with it.
  * We always hardwire it to one in Linux.
  */
 #define PRIORITY_BASE			0
 #define     PRIORITY_PER_ID		4

 /*
  * Each hart context has a vector of interrupt enable bits associated with it.
  * There's one bit for each interrupt source.
  */
 #define ENABLE_BASE			0x2000
 #define     ENABLE_PER_HART		0x80

 /*
  * Each hart context has a set of control registers associated with it.  Right
  * now there's only two: a source priority threshold over which the hart will
  * take an interrupt, and a register to claim interrupts.
  */
 #define CONTEXT_BASE			0x200000
 #define     CONTEXT_PER_HART		0x1000
 #define     CONTEXT_THRESHOLD		0x00
 #define     CONTEXT_CLAIM		0x04

 static void __iomem *plic_regs;

 struct plic_handler {
 	bool			present;
 	int			ctxid;
 };
 static DEFINE_PER_CPU(struct plic_handler, plic_handlers);

 static inline void __iomem *plic_hart_offset(int ctxid)
 {
 	return plic_regs + CONTEXT_BASE + ctxid * CONTEXT_PER_HART;
 }

 static inline u32 __iomem *plic_enable_base(int ctxid)
 {
 	return plic_regs + ENABLE_BASE + ctxid * ENABLE_PER_HART;
 }

 /*
  * Protect mask operations on the registers given that we can't assume that
  * atomic memory operations work on them.
  */
 static DEFINE_RAW_SPINLOCK(plic_toggle_lock);

 static inline void plic_toggle(int ctxid, int hwirq, int enable)
 {
 	u32 __iomem *reg = plic_enable_base(ctxid) + (hwirq / 32);
 	u32 hwirq_mask = 1 << (hwirq % 32);

 	raw_spin_lock(&plic_toggle_lock);
 	if (enable)
 		writel(readl(reg) | hwirq_mask, reg);
 	else
 		writel(readl(reg) & ~hwirq_mask, reg);
 	raw_spin_unlock(&plic_toggle_lock);
 }

 static inline void plic_irq_toggle(struct irq_data *d, int enable)
 {
 	int cpu;

 	writel(enable, plic_regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
 	for_each_cpu(cpu, irq_data_get_affinity_mask(d)) {
 		struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);

 		if (handler->present)
 			plic_toggle(handler->ctxid, d->hwirq, enable);
 	}
 }

 static void plic_irq_enable(struct irq_data *d)
 {
 	plic_irq_toggle(d, 1);
 }

 static void plic_irq_disable(struct irq_data *d)
 {
 	plic_irq_toggle(d, 0);
 }

 static struct irq_chip plic_chip = {
 	.name		= "SiFive PLIC",
 	/*
 	 * There is no need to mask/unmask PLIC interrupts.  They are "masked"
 	 * by reading claim and "unmasked" when writing it back.
 	 */
 	.irq_enable	= plic_irq_enable,
 	.irq_disable	= plic_irq_disable,
 };

 static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
 			      irq_hw_number_t hwirq)
 {
 	irq_set_chip_and_handler(irq, &plic_chip, handle_simple_irq);
 	irq_set_chip_data(irq, NULL);
 	irq_set_noprobe(irq);
 	return 0;
 }

 static const struct irq_domain_ops plic_irqdomain_ops = {
 	.map		= plic_irqdomain_map,
 	.xlate		= irq_domain_xlate_onecell,
 };

 static struct irq_domain *plic_irqdomain;

 /*
  * Handling an interrupt is a two-step process: first you claim the interrupt
  * by reading the claim register, then you complete the interrupt by writing
  * that source ID back to the same claim register.  This automatically enables
  * and disables the interrupt, so there's nothing else to do.
  */
 static void plic_handle_irq(struct pt_regs *regs)
 {
 	struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
 	void __iomem *claim = plic_hart_offset(handler->ctxid) + CONTEXT_CLAIM;
 	irq_hw_number_t hwirq;

 	WARN_ON_ONCE(!handler->present);

 	csr_clear(sie, SIE_SEIE);
 	while ((hwirq = readl(claim))) {
 		int irq = irq_find_mapping(plic_irqdomain, hwirq);

 		if (unlikely(irq <= 0))
 			pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
 					hwirq);
 		else
 			generic_handle_irq(irq);
 		writel(hwirq, claim);
 	}
 	csr_set(sie, SIE_SEIE);
 }

 /*
  * Walk up the DT tree until we find an active RISC-V core (HART) node and
  * extract the cpuid from it.
  */
 static int plic_find_hart_id(struct device_node *node)
 {
 	for (; node; node = node->parent) {
 		if (of_device_is_compatible(node, "riscv"))
 			return riscv_of_processor_hartid(node);
 	}

 	return -1;
 }

 static int __init plic_init(struct device_node *node,
 		struct device_node *parent)
 {
 	int error = 0, nr_handlers, nr_mapped = 0, i;
 	u32 nr_irqs;

 	if (plic_regs) {
 		pr_warn("PLIC already present.\n");
 		return -ENXIO;
 	}

 	plic_regs = of_iomap(node, 0);
 	if (WARN_ON(!plic_regs))
 		return -EIO;

 	error = -EINVAL;
 	of_property_read_u32(node, "riscv,ndev", &nr_irqs);
 	if (WARN_ON(!nr_irqs))
 		goto out_iounmap;

 	nr_handlers = of_irq_count(node);
 	if (WARN_ON(!nr_handlers))
 		goto out_iounmap;
 	if (WARN_ON(nr_handlers < num_possible_cpus()))
 		goto out_iounmap;

 	error = -ENOMEM;
 	plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
 			&plic_irqdomain_ops, NULL);
 	if (WARN_ON(!plic_irqdomain))
 		goto out_iounmap;

 	for (i = 0; i < nr_handlers; i++) {
 		struct of_phandle_args parent;
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
 		int cpu, hartid;

 		if (of_irq_parse_one(node, i, &parent)) {
 			pr_err("failed to parse parent for context %d.\n", i);
 			continue;
 		}

 		/* skip context holes */
 		if (parent.args[0] == -1)
 			continue;

 		hartid = plic_find_hart_id(parent.np);
 		if (hartid < 0) {
 			pr_warn("failed to parse hart ID for context %d.\n", i);
 			continue;
 		}

 		cpu = riscv_hartid_to_cpuid(hartid);
 		handler = per_cpu_ptr(&plic_handlers, cpu);
 		handler->present = true;
 		handler->ctxid = i;

 		/* priority must be > threshold to trigger an interrupt */
 		writel(0, plic_hart_offset(i) + CONTEXT_THRESHOLD);
 		for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
 			plic_toggle(i, hwirq, 0);
 		nr_mapped++;
 	}

 	pr_info("mapped %d interrupts to %d (out of %d) handlers.\n",
 		nr_irqs, nr_mapped, nr_handlers);
 	set_handle_irq(plic_handle_irq);
 	return 0;

 out_iounmap:
 	iounmap(plic_regs);
 	return error;
 }

 IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
 IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright (C) 2017 SiFive
	* Copyright (C) 2018 Christoph Hellwig
	*/
	#define pr_fmt(fmt) "plic: " fmt
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/irq.h>
	#include <linux/irqchip.h>
	#include <linux/irqdomain.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/of_address.h>
	#include <linux/of_irq.h>
	#include <linux/platform_device.h>
	#include <linux/spinlock.h>
	#include <asm/smp.h>

	/*
	* This driver implements a version of the RISC-V PLIC with the actual layout
	* specified in chapter 8 of the SiFive U5 Coreplex Series Manual:
	*
	* https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
	*
	* The largest number supported by devices marked as 'sifive,plic-1.0.0', is
	* 1024, of which device 0 is defined as non-existent by the RISC-V Privileged
	* Spec.
	*/

	#define MAX_DEVICES 1024
	#define MAX_CONTEXTS 15872

	/*
	* Each interrupt source has a priority register associated with it.
	* We always hardwire it to one in Linux.
	*/
	#define PRIORITY_BASE 0
	#define PRIORITY_PER_ID 4

	/*
	* Each hart context has a vector of interrupt enable bits associated with it.
	* There's one bit for each interrupt source.
	*/
	#define ENABLE_BASE 0x2000
	#define ENABLE_PER_HART 0x80

	/*
	* Each hart context has a set of control registers associated with it. Right
	* now there's only two: a source priority threshold over which the hart will
	* take an interrupt, and a register to claim interrupts.
	*/
	#define CONTEXT_BASE 0x200000
	#define CONTEXT_PER_HART 0x1000
	#define CONTEXT_THRESHOLD 0x00
	#define CONTEXT_CLAIM 0x04

	static void __iomem *plic_regs;

	struct plic_handler {
	bool present;
	int ctxid;
	};
	static DEFINE_PER_CPU(struct plic_handler, plic_handlers);

	static inline void __iomem *plic_hart_offset(int ctxid)
	{
	return plic_regs + CONTEXT_BASE + ctxid * CONTEXT_PER_HART;
	}

	static inline u32 __iomem *plic_enable_base(int ctxid)
	{
	return plic_regs + ENABLE_BASE + ctxid * ENABLE_PER_HART;
	}

	/*
	* Protect mask operations on the registers given that we can't assume that
	* atomic memory operations work on them.
	*/
	static DEFINE_RAW_SPINLOCK(plic_toggle_lock);

	static inline void plic_toggle(int ctxid, int hwirq, int enable)
	{
	u32 __iomem *reg = plic_enable_base(ctxid) + (hwirq / 32);
	u32 hwirq_mask = 1 << (hwirq % 32);

	raw_spin_lock(&plic_toggle_lock);
	if (enable)
	writel(readl(reg) \| hwirq_mask, reg);
	else
	writel(readl(reg) & ~hwirq_mask, reg);
	raw_spin_unlock(&plic_toggle_lock);
	}

	static inline void plic_irq_toggle(struct irq_data *d, int enable)
	{
	int cpu;

	writel(enable, plic_regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
	for_each_cpu(cpu, irq_data_get_affinity_mask(d)) {
	struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);

	if (handler->present)
	plic_toggle(handler->ctxid, d->hwirq, enable);
	}
	}

	static void plic_irq_enable(struct irq_data *d)
	{
	plic_irq_toggle(d, 1);
	}

	static void plic_irq_disable(struct irq_data *d)
	{
	plic_irq_toggle(d, 0);
	}

	static struct irq_chip plic_chip = {
	.name = "SiFive PLIC",
	/*
	* There is no need to mask/unmask PLIC interrupts. They are "masked"
	* by reading claim and "unmasked" when writing it back.
	*/
	.irq_enable = plic_irq_enable,
	.irq_disable = plic_irq_disable,
	};

	static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
	irq_hw_number_t hwirq)
	{
	irq_set_chip_and_handler(irq, &plic_chip, handle_simple_irq);
	irq_set_chip_data(irq, NULL);
	irq_set_noprobe(irq);
	return 0;
	}

	static const struct irq_domain_ops plic_irqdomain_ops = {
	.map = plic_irqdomain_map,
	.xlate = irq_domain_xlate_onecell,
	};

	static struct irq_domain *plic_irqdomain;

	/*
	* Handling an interrupt is a two-step process: first you claim the interrupt
	* by reading the claim register, then you complete the interrupt by writing
	* that source ID back to the same claim register. This automatically enables
	* and disables the interrupt, so there's nothing else to do.
	*/
	static void plic_handle_irq(struct pt_regs *regs)
	{
	struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
	void __iomem *claim = plic_hart_offset(handler->ctxid) + CONTEXT_CLAIM;
	irq_hw_number_t hwirq;

	WARN_ON_ONCE(!handler->present);

	csr_clear(sie, SIE_SEIE);
	while ((hwirq = readl(claim))) {
	int irq = irq_find_mapping(plic_irqdomain, hwirq);

	if (unlikely(irq <= 0))
	pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
	hwirq);
	else
	generic_handle_irq(irq);
	writel(hwirq, claim);
	}
	csr_set(sie, SIE_SEIE);
	}

	/*
	* Walk up the DT tree until we find an active RISC-V core (HART) node and
	* extract the cpuid from it.
	*/
	static int plic_find_hart_id(struct device_node *node)
	{
	for (; node; node = node->parent) {
	if (of_device_is_compatible(node, "riscv"))
	return riscv_of_processor_hartid(node);
	}

	return -1;
	}

	static int __init plic_init(struct device_node *node,
	struct device_node *parent)
	{
	int error = 0, nr_handlers, nr_mapped = 0, i;
	u32 nr_irqs;

	if (plic_regs) {
	pr_warn("PLIC already present.\n");
	return -ENXIO;
	}

	plic_regs = of_iomap(node, 0);
	if (WARN_ON(!plic_regs))
	return -EIO;

	error = -EINVAL;
	of_property_read_u32(node, "riscv,ndev", &nr_irqs);
	if (WARN_ON(!nr_irqs))
	goto out_iounmap;

	nr_handlers = of_irq_count(node);
	if (WARN_ON(!nr_handlers))
	goto out_iounmap;
	if (WARN_ON(nr_handlers < num_possible_cpus()))
	goto out_iounmap;

	error = -ENOMEM;
	plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
	&plic_irqdomain_ops, NULL);
	if (WARN_ON(!plic_irqdomain))
	goto out_iounmap;

	for (i = 0; i < nr_handlers; i++) {
	struct of_phandle_args parent;
	struct plic_handler *handler;
	irq_hw_number_t hwirq;
	int cpu, hartid;

	if (of_irq_parse_one(node, i, &parent)) {
	pr_err("failed to parse parent for context %d.\n", i);
	continue;
	}

	/* skip context holes */
	if (parent.args[0] == -1)
	continue;

	hartid = plic_find_hart_id(parent.np);
	if (hartid < 0) {
	pr_warn("failed to parse hart ID for context %d.\n", i);
	continue;
	}

	cpu = riscv_hartid_to_cpuid(hartid);
	handler = per_cpu_ptr(&plic_handlers, cpu);
	handler->present = true;
	handler->ctxid = i;

	/* priority must be > threshold to trigger an interrupt */
	writel(0, plic_hart_offset(i) + CONTEXT_THRESHOLD);
	for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
	plic_toggle(i, hwirq, 0);
	nr_mapped++;
	}

	pr_info("mapped %d interrupts to %d (out of %d) handlers.\n",
	nr_irqs, nr_mapped, nr_handlers);
	set_handle_irq(plic_handle_irq);
	return 0;

	out_iounmap:
	iounmap(plic_regs);
	return error;
	}

	IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
	IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */