CRISv32: Implement early console
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
diff --git a/arch/cris/arch-v32/kernel/debugport.c b/arch/cris/arch-v32/kernel/debugport.c
index 610909b..02e33eb 100644
--- a/arch/cris/arch-v32/kernel/debugport.c
+++ b/arch/cris/arch-v32/kernel/debugport.c
@@ -3,7 +3,9 @@
*/
#include <linux/console.h>
+#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/string.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/ser_defs.h>
@@ -65,6 +67,7 @@
},
#endif
};
+
static struct dbg_port *port =
#if defined(CONFIG_ETRAX_DEBUG_PORT0)
&ports[0];
@@ -97,14 +100,19 @@
#endif
#endif
-static void
-start_port(struct dbg_port* p)
+static void start_port(struct dbg_port *p)
{
- if (!p)
+ /* Set up serial port registers */
+ reg_ser_rw_tr_ctrl tr_ctrl = {0};
+ reg_ser_rw_tr_dma_en tr_dma_en = {0};
+
+ reg_ser_rw_rec_ctrl rec_ctrl = {0};
+ reg_ser_rw_tr_baud_div tr_baud_div = {0};
+ reg_ser_rw_rec_baud_div rec_baud_div = {0};
+
+ if (!p || p->started)
return;
- if (p->started)
- return;
p->started = 1;
if (p->nbr == 1)
@@ -118,36 +126,24 @@
crisv32_pinmux_alloc_fixed(pinmux_ser4);
#endif
- /* Set up serial port registers */
- reg_ser_rw_tr_ctrl tr_ctrl = {0};
- reg_ser_rw_tr_dma_en tr_dma_en = {0};
-
- reg_ser_rw_rec_ctrl rec_ctrl = {0};
- reg_ser_rw_tr_baud_div tr_baud_div = {0};
- reg_ser_rw_rec_baud_div rec_baud_div = {0};
-
tr_ctrl.base_freq = rec_ctrl.base_freq = regk_ser_f29_493;
tr_dma_en.en = rec_ctrl.dma_mode = regk_ser_no;
tr_baud_div.div = rec_baud_div.div = 29493000 / p->baudrate / 8;
tr_ctrl.en = rec_ctrl.en = 1;
- if (p->parity == 'O')
- {
+ if (p->parity == 'O') {
tr_ctrl.par_en = regk_ser_yes;
tr_ctrl.par = regk_ser_odd;
rec_ctrl.par_en = regk_ser_yes;
rec_ctrl.par = regk_ser_odd;
- }
- else if (p->parity == 'E')
- {
+ } else if (p->parity == 'E') {
tr_ctrl.par_en = regk_ser_yes;
tr_ctrl.par = regk_ser_even;
rec_ctrl.par_en = regk_ser_yes;
rec_ctrl.par = regk_ser_odd;
}
- if (p->bits == 7)
- {
+ if (p->bits == 7) {
tr_ctrl.data_bits = regk_ser_bits7;
rec_ctrl.data_bits = regk_ser_bits7;
}
@@ -161,8 +157,7 @@
#ifdef CONFIG_ETRAX_KGDB
/* Use polling to get a single character from the kernel debug port */
-int
-getDebugChar(void)
+int getDebugChar(void)
{
reg_ser_rs_stat_din stat;
reg_ser_rw_ack_intr ack_intr = { 0 };
@@ -179,8 +174,7 @@
}
/* Use polling to put a single character to the kernel debug port */
-void
-putDebugChar(int val)
+void putDebugChar(int val)
{
reg_ser_r_stat_din stat;
do {
@@ -190,12 +184,48 @@
}
#endif /* CONFIG_ETRAX_KGDB */
+static void __init early_putch(int c)
+{
+ reg_ser_r_stat_din stat;
+ /* Wait until transmitter is ready and send. */
+ do
+ stat = REG_RD(ser, port->instance, r_stat_din);
+ while (!stat.tr_rdy);
+ REG_WR_INT(ser, port->instance, rw_dout, c);
+}
+
+static void __init
+early_console_write(struct console *con, const char *s, unsigned n)
+{
+ extern void reset_watchdog(void);
+ int i;
+
+ /* Send data. */
+ for (i = 0; i < n; i++) {
+ /* TODO: the '\n' -> '\n\r' translation should be done at the
+ receiver. Remove it when the serial driver removes it. */
+ if (s[i] == '\n')
+ early_putch('\r');
+ early_putch(s[i]);
+ reset_watchdog();
+ }
+}
+
+static struct console early_console_dev __initdata = {
+ .name = "early",
+ .write = early_console_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1
+};
+
/* Register console for printk's, etc. */
-int __init
-init_etrax_debug(void)
+int __init init_etrax_debug(void)
{
start_port(port);
+ /* Register an early console if a debug port was chosen. */
+ register_console(&early_console_dev);
+
#ifdef CONFIG_ETRAX_KGDB
start_port(kgdb_port);
#endif /* CONFIG_ETRAX_KGDB */