diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
new file mode 100644
index 0000000..24a5e2e
--- /dev/null
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -0,0 +1,405 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A. 
+ *  by Pantelis Antoniou <panto@intracom.gr>
+ * 
+ * 2005 (c) MontaVista Software, Inc. 
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License 
+ * version 2. This program is licensed "as is" without any warranty of any 
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+#ifdef CONFIG_8xx
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+	immap_t *im = (immap_t *)fs_enet_immap;
+	void *dir, *dat, *ppar;
+	int adv;
+	u8 msk;
+
+	switch (port) {
+		case fsiop_porta:
+			dir = &im->im_ioport.iop_padir;
+			dat = &im->im_ioport.iop_padat;
+			ppar = &im->im_ioport.iop_papar;
+			break;
+
+		case fsiop_portb:
+			dir = &im->im_cpm.cp_pbdir;
+			dat = &im->im_cpm.cp_pbdat;
+			ppar = &im->im_cpm.cp_pbpar;
+			break;
+
+		case fsiop_portc:
+			dir = &im->im_ioport.iop_pcdir;
+			dat = &im->im_ioport.iop_pcdat;
+			ppar = &im->im_ioport.iop_pcpar;
+			break;
+
+		case fsiop_portd:
+			dir = &im->im_ioport.iop_pddir;
+			dat = &im->im_ioport.iop_pddat;
+			ppar = &im->im_ioport.iop_pdpar;
+			break;
+
+		case fsiop_porte:
+			dir = &im->im_cpm.cp_pedir;
+			dat = &im->im_cpm.cp_pedat;
+			ppar = &im->im_cpm.cp_pepar;
+			break;
+
+		default:
+			printk(KERN_ERR DRV_MODULE_NAME
+			       "Illegal port value %d!\n", port);
+			return -EINVAL;
+	}
+
+	adv = bit >> 3;
+	dir = (char *)dir + adv;
+	dat = (char *)dat + adv;
+	ppar = (char *)ppar + adv;
+
+	msk = 1 << (7 - (bit & 7));
+	if ((in_8(ppar) & msk) != 0) {
+		printk(KERN_ERR DRV_MODULE_NAME
+		       "pin %d on port %d is not general purpose!\n", bit, port);
+		return -EINVAL;
+	}
+
+	*dirp = dir;
+	*datp = dat;
+	*mskp = msk;
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_8260
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+	iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport;
+	void *dir, *dat, *ppar;
+	int adv;
+	u8 msk;
+
+	switch (port) {
+		case fsiop_porta:
+			dir = &io->iop_pdira;
+			dat = &io->iop_pdata;
+			ppar = &io->iop_ppara;
+			break;
+
+		case fsiop_portb:
+			dir = &io->iop_pdirb;
+			dat = &io->iop_pdatb;
+			ppar = &io->iop_pparb;
+			break;
+
+		case fsiop_portc:
+			dir = &io->iop_pdirc;
+			dat = &io->iop_pdatc;
+			ppar = &io->iop_pparc;
+			break;
+
+		case fsiop_portd:
+			dir = &io->iop_pdird;
+			dat = &io->iop_pdatd;
+			ppar = &io->iop_ppard;
+			break;
+
+		default:
+			printk(KERN_ERR DRV_MODULE_NAME
+			       "Illegal port value %d!\n", port);
+			return -EINVAL;
+	}
+
+	adv = bit >> 3;
+	dir = (char *)dir + adv;
+	dat = (char *)dat + adv;
+	ppar = (char *)ppar + adv;
+
+	msk = 1 << (7 - (bit & 7));
+	if ((in_8(ppar) & msk) != 0) {
+		printk(KERN_ERR DRV_MODULE_NAME
+		       "pin %d on port %d is not general purpose!\n", bit, port);
+		return -EINVAL;
+	}
+
+	*dirp = dir;
+	*datp = dat;
+	*mskp = msk;
+
+	return 0;
+}
+#endif
+
+static inline void bb_set(u8 *p, u8 m)
+{
+	out_8(p, in_8(p) | m);
+}
+
+static inline void bb_clr(u8 *p, u8 m)
+{
+	out_8(p, in_8(p) & ~m);
+}
+
+static inline int bb_read(u8 *p, u8 m)
+{
+	return (in_8(p) & m) != 0;
+}
+
+static inline void mdio_active(struct fs_enet_mii_bus *bus)
+{
+	bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
+{
+	bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline int mdio_read(struct fs_enet_mii_bus *bus)
+{
+	return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio(struct fs_enet_mii_bus *bus, int what)
+{
+	if (what)
+		bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+	else
+		bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdc(struct fs_enet_mii_bus *bus, int what)
+{
+	if (what)
+		bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+	else
+		bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+}
+
+static inline void mii_delay(struct fs_enet_mii_bus *bus)
+{
+	udelay(bus->bus_info->i.bitbang.delay);
+}
+
+/* Utility to send the preamble, address, and register (common to read and write). */
+static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
+{
+	int j;
+
+	/*
+	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
+	 * The IEEE spec says this is a PHY optional requirement.  The AMD
+	 * 79C874 requires one after power up and one after a MII communications
+	 * error.  This means that we are doing more preambles than we need,
+	 * but it is safer and will be much more robust.
+	 */
+
+	mdio_active(bus);
+	mdio(bus, 1);
+	for (j = 0; j < 32; j++) {
+		mdc(bus, 0);
+		mii_delay(bus);
+		mdc(bus, 1);
+		mii_delay(bus);
+	}
+
+	/* send the start bit (01) and the read opcode (10) or write (10) */
+	mdc(bus, 0);
+	mdio(bus, 0);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+	mdc(bus, 0);
+	mdio(bus, 1);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+	mdc(bus, 0);
+	mdio(bus, read);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+	mdc(bus, 0);
+	mdio(bus, !read);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+
+	/* send the PHY address */
+	for (j = 0; j < 5; j++) {
+		mdc(bus, 0);
+		mdio(bus, (addr & 0x10) != 0);
+		mii_delay(bus);
+		mdc(bus, 1);
+		mii_delay(bus);
+		addr <<= 1;
+	}
+
+	/* send the register address */
+	for (j = 0; j < 5; j++) {
+		mdc(bus, 0);
+		mdio(bus, (reg & 0x10) != 0);
+		mii_delay(bus);
+		mdc(bus, 1);
+		mii_delay(bus);
+		reg <<= 1;
+	}
+}
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+	u16 rdreg;
+	int ret, j;
+	u8 addr = phy_id & 0xff;
+	u8 reg = location & 0xff;
+
+	bitbang_pre(bus, 1, addr, reg);
+
+	/* tri-state our MDIO I/O pin so we can read */
+	mdc(bus, 0);
+	mdio_tristate(bus);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+
+	/* check the turnaround bit: the PHY should be driving it to zero */
+	if (mdio_read(bus) != 0) {
+		/* PHY didn't drive TA low */
+		for (j = 0; j < 32; j++) {
+			mdc(bus, 0);
+			mii_delay(bus);
+			mdc(bus, 1);
+			mii_delay(bus);
+		}
+		ret = -1;
+		goto out;
+	}
+
+	mdc(bus, 0);
+	mii_delay(bus);
+
+	/* read 16 bits of register data, MSB first */
+	rdreg = 0;
+	for (j = 0; j < 16; j++) {
+		mdc(bus, 1);
+		mii_delay(bus);
+		rdreg <<= 1;
+		rdreg |= mdio_read(bus);
+		mdc(bus, 0);
+		mii_delay(bus);
+	}
+
+	mdc(bus, 1);
+	mii_delay(bus);
+	mdc(bus, 0);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+
+	ret = rdreg;
+out:
+	return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
+{
+	int j;
+	u8 addr = phy_id & 0xff;
+	u8 reg = location & 0xff;
+	u16 value = val & 0xffff;
+
+	bitbang_pre(bus, 0, addr, reg);
+
+	/* send the turnaround (10) */
+	mdc(bus, 0);
+	mdio(bus, 1);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+	mdc(bus, 0);
+	mdio(bus, 0);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+
+	/* write 16 bits of register data, MSB first */
+	for (j = 0; j < 16; j++) {
+		mdc(bus, 0);
+		mdio(bus, (value & 0x8000) != 0);
+		mii_delay(bus);
+		mdc(bus, 1);
+		mii_delay(bus);
+		value <<= 1;
+	}
+
+	/*
+	 * Tri-state the MDIO line.
+	 */
+	mdio_tristate(bus);
+	mdc(bus, 0);
+	mii_delay(bus);
+	mdc(bus, 1);
+	mii_delay(bus);
+}
+
+int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
+{
+	const struct fs_mii_bus_info *bi = bus->bus_info;
+	int r;
+
+	r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
+			 &bus->bitbang.mdio_dat,
+			 &bus->bitbang.mdio_msk,
+			 bi->i.bitbang.mdio_port,
+			 bi->i.bitbang.mdio_bit);
+	if (r != 0)
+		return r;
+
+	r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
+			 &bus->bitbang.mdc_dat,
+			 &bus->bitbang.mdc_msk,
+			 bi->i.bitbang.mdc_port,
+			 bi->i.bitbang.mdc_bit);
+	if (r != 0)
+		return r;
+
+	bus->mii_read = mii_read;
+	bus->mii_write = mii_write;
+
+	return 0;
+}