| /* |
| * Generic MIPI DPI Panel Driver |
| * |
| * Copyright (C) 2013 Texas Instruments |
| * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #include <linux/gpio.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include <video/omapdss.h> |
| #include <video/omap-panel-data.h> |
| |
| struct panel_drv_data { |
| struct omap_dss_device dssdev; |
| struct omap_dss_device *in; |
| |
| int data_lines; |
| |
| struct omap_video_timings videomode; |
| |
| int backlight_gpio; |
| int enable_gpio; |
| }; |
| |
| #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) |
| |
| static int panel_dpi_connect(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (omapdss_device_is_connected(dssdev)) |
| return 0; |
| |
| r = in->ops.dpi->connect(in, dssdev); |
| if (r) |
| return r; |
| |
| return 0; |
| } |
| |
| static void panel_dpi_disconnect(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return; |
| |
| in->ops.dpi->disconnect(in, dssdev); |
| } |
| |
| static int panel_dpi_enable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return -ENODEV; |
| |
| if (omapdss_device_is_enabled(dssdev)) |
| return 0; |
| |
| in->ops.dpi->set_data_lines(in, ddata->data_lines); |
| in->ops.dpi->set_timings(in, &ddata->videomode); |
| |
| r = in->ops.dpi->enable(in); |
| if (r) |
| return r; |
| |
| if (gpio_is_valid(ddata->enable_gpio)) |
| gpio_set_value_cansleep(ddata->enable_gpio, 1); |
| |
| if (gpio_is_valid(ddata->backlight_gpio)) |
| gpio_set_value_cansleep(ddata->backlight_gpio, 1); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| return 0; |
| } |
| |
| static void panel_dpi_disable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| if (!omapdss_device_is_enabled(dssdev)) |
| return; |
| |
| if (gpio_is_valid(ddata->enable_gpio)) |
| gpio_set_value_cansleep(ddata->enable_gpio, 0); |
| |
| if (gpio_is_valid(ddata->backlight_gpio)) |
| gpio_set_value_cansleep(ddata->backlight_gpio, 0); |
| |
| in->ops.dpi->disable(in); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| } |
| |
| static void panel_dpi_set_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| ddata->videomode = *timings; |
| dssdev->panel.timings = *timings; |
| |
| in->ops.dpi->set_timings(in, timings); |
| } |
| |
| static void panel_dpi_get_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| |
| *timings = ddata->videomode; |
| } |
| |
| static int panel_dpi_check_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| return in->ops.dpi->check_timings(in, timings); |
| } |
| |
| static struct omap_dss_driver panel_dpi_ops = { |
| .connect = panel_dpi_connect, |
| .disconnect = panel_dpi_disconnect, |
| |
| .enable = panel_dpi_enable, |
| .disable = panel_dpi_disable, |
| |
| .set_timings = panel_dpi_set_timings, |
| .get_timings = panel_dpi_get_timings, |
| .check_timings = panel_dpi_check_timings, |
| |
| .get_resolution = omapdss_default_get_resolution, |
| }; |
| |
| static int panel_dpi_probe_pdata(struct platform_device *pdev) |
| { |
| const struct panel_dpi_platform_data *pdata; |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *dssdev, *in; |
| struct videomode vm; |
| |
| pdata = dev_get_platdata(&pdev->dev); |
| |
| in = omap_dss_find_output(pdata->source); |
| if (in == NULL) { |
| dev_err(&pdev->dev, "failed to find video source '%s'\n", |
| pdata->source); |
| return -EPROBE_DEFER; |
| } |
| |
| ddata->in = in; |
| |
| ddata->data_lines = pdata->data_lines; |
| |
| videomode_from_timing(pdata->display_timing, &vm); |
| videomode_to_omap_video_timings(&vm, &ddata->videomode); |
| |
| dssdev = &ddata->dssdev; |
| dssdev->name = pdata->name; |
| |
| ddata->enable_gpio = pdata->enable_gpio; |
| ddata->backlight_gpio = pdata->backlight_gpio; |
| |
| return 0; |
| } |
| |
| static int panel_dpi_probe(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata; |
| struct omap_dss_device *dssdev; |
| int r; |
| |
| ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| if (ddata == NULL) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ddata); |
| |
| if (dev_get_platdata(&pdev->dev)) { |
| r = panel_dpi_probe_pdata(pdev); |
| if (r) |
| return r; |
| } else { |
| return -ENODEV; |
| } |
| |
| if (gpio_is_valid(ddata->enable_gpio)) { |
| r = devm_gpio_request_one(&pdev->dev, ddata->enable_gpio, |
| GPIOF_OUT_INIT_LOW, "panel enable"); |
| if (r) |
| goto err_gpio; |
| } |
| |
| if (gpio_is_valid(ddata->backlight_gpio)) { |
| r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio, |
| GPIOF_OUT_INIT_LOW, "panel backlight"); |
| if (r) |
| goto err_gpio; |
| } |
| |
| dssdev = &ddata->dssdev; |
| dssdev->dev = &pdev->dev; |
| dssdev->driver = &panel_dpi_ops; |
| dssdev->type = OMAP_DISPLAY_TYPE_DPI; |
| dssdev->owner = THIS_MODULE; |
| dssdev->panel.timings = ddata->videomode; |
| dssdev->phy.dpi.data_lines = ddata->data_lines; |
| |
| r = omapdss_register_display(dssdev); |
| if (r) { |
| dev_err(&pdev->dev, "Failed to register panel\n"); |
| goto err_reg; |
| } |
| |
| return 0; |
| |
| err_reg: |
| err_gpio: |
| omap_dss_put_device(ddata->in); |
| return r; |
| } |
| |
| static int __exit panel_dpi_remove(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *dssdev = &ddata->dssdev; |
| struct omap_dss_device *in = ddata->in; |
| |
| omapdss_unregister_display(dssdev); |
| |
| panel_dpi_disable(dssdev); |
| panel_dpi_disconnect(dssdev); |
| |
| omap_dss_put_device(in); |
| |
| return 0; |
| } |
| |
| static struct platform_driver panel_dpi_driver = { |
| .probe = panel_dpi_probe, |
| .remove = __exit_p(panel_dpi_remove), |
| .driver = { |
| .name = "panel-dpi", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(panel_dpi_driver); |
| |
| MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); |
| MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver"); |
| MODULE_LICENSE("GPL"); |