ixgbe: Fix WoL functionality for 82599 KX4 devices
The current code writes the PME enabled bit in PCI config space which is
wrong. This was needed for pre-release hardware, and was not removed from
the driver. Also, we need to clear the WUS (wake up status) after we
resume. Otherwise we can't wake for the same event again since it's still
asserted in the hardware. Plus, the multicast lists were being written
improperly, causing multicast WoL to fail.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 5567519..186a650 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -50,7 +50,6 @@
static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
-static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
/**
@@ -1377,8 +1376,7 @@
* Clear accounting of old secondary address list,
* don't count RAR[0]
*/
- uc_addr_in_use = hw->addr_ctrl.rar_used_count -
- hw->addr_ctrl.mc_addr_in_rar_count - 1;
+ uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
hw->addr_ctrl.overflow_promisc = 0;
@@ -1493,40 +1491,6 @@
}
/**
- * ixgbe_add_mc_addr - Adds a multicast address.
- * @hw: pointer to hardware structure
- * @mc_addr: new multicast address
- *
- * Adds it to unused receive address register or to the multicast table.
- **/
-static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
-{
- u32 rar_entries = hw->mac.num_rar_entries;
- u32 rar;
-
- hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
- mc_addr[0], mc_addr[1], mc_addr[2],
- mc_addr[3], mc_addr[4], mc_addr[5]);
-
- /*
- * Place this multicast address in the RAR if there is room,
- * else put it in the MTA
- */
- if (hw->addr_ctrl.rar_used_count < rar_entries) {
- /* use RAR from the end up for multicast */
- rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1;
- hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
- hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar);
- hw->addr_ctrl.rar_used_count++;
- hw->addr_ctrl.mc_addr_in_rar_count++;
- } else {
- ixgbe_set_mta(hw, mc_addr);
- }
-
- hw_dbg(hw, "ixgbe_add_mc_addr Complete\n");
-}
-
-/**
* ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
* @hw: pointer to hardware structure
* @mc_addr_list: the list of new multicast addresses
@@ -1542,7 +1506,6 @@
u32 mc_addr_count, ixgbe_mc_addr_itr next)
{
u32 i;
- u32 rar_entries = hw->mac.num_rar_entries;
u32 vmdq;
/*
@@ -1550,18 +1513,8 @@
* use.
*/
hw->addr_ctrl.num_mc_addrs = mc_addr_count;
- hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count;
- hw->addr_ctrl.mc_addr_in_rar_count = 0;
hw->addr_ctrl.mta_in_use = 0;
- /* Zero out the other receive addresses. */
- hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count,
- rar_entries - 1);
- for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
- }
-
/* Clear the MTA */
hw_dbg(hw, " Clearing MTA\n");
for (i = 0; i < hw->mac.mcft_size; i++)
@@ -1570,7 +1523,7 @@
/* Add the new addresses */
for (i = 0; i < mc_addr_count; i++) {
hw_dbg(hw, " Adding the multicast addresses:\n");
- ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq));
+ ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
}
/* Enable mta */