[ACPI] ACPICA 20060113
Added 2006 copyright.
At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n
Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/executer/exfldio.c b/drivers/acpi/executer/exfldio.c
index ba6e088..9fe27fd 100644
--- a/drivers/acpi/executer/exfldio.c
+++ b/drivers/acpi/executer/exfldio.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -94,10 +94,9 @@
/* We must have a valid region */
if (ACPI_GET_OBJECT_TYPE(rgn_desc) != ACPI_TYPE_REGION) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed Region, found type %X (%s)\n",
- ACPI_GET_OBJECT_TYPE(rgn_desc),
- acpi_ut_get_object_type_name(rgn_desc)));
+ ACPI_REPORT_ERROR(("Needed Region, found type %X (%s)\n",
+ ACPI_GET_OBJECT_TYPE(rgn_desc),
+ acpi_ut_get_object_type_name(rgn_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -162,31 +161,14 @@
* than the region itself. For example, a region of length one
* byte, and a field with Dword access specified.
*/
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n",
- acpi_ut_get_node_name(obj_desc->
- common_field.
- node),
- obj_desc->common_field.
- access_byte_width,
- acpi_ut_get_node_name(rgn_desc->
- region.node),
- rgn_desc->region.length));
+ ACPI_REPORT_ERROR(("Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n", acpi_ut_get_node_name(obj_desc->common_field.node), obj_desc->common_field.access_byte_width, acpi_ut_get_node_name(rgn_desc->region.node), rgn_desc->region.length));
}
/*
* Offset rounded up to next multiple of field width
* exceeds region length, indicate an error
*/
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)\n",
- acpi_ut_get_node_name(obj_desc->common_field.
- node),
- obj_desc->common_field.base_byte_offset,
- field_datum_byte_offset,
- obj_desc->common_field.access_byte_width,
- acpi_ut_get_node_name(rgn_desc->region.node),
- rgn_desc->region.length));
+ ACPI_REPORT_ERROR(("Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)\n", acpi_ut_get_node_name(obj_desc->common_field.node), obj_desc->common_field.base_byte_offset, field_datum_byte_offset, obj_desc->common_field.access_byte_width, acpi_ut_get_node_name(rgn_desc->region.node), rgn_desc->region.length));
return_ACPI_STATUS(AE_AML_REGION_LIMIT);
}
@@ -270,12 +252,11 @@
if (ACPI_FAILURE(status)) {
if (status == AE_NOT_IMPLEMENTED) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Region %s(%X) not implemented\n",
- acpi_ut_get_region_name(rgn_desc->
- region.
- space_id),
- rgn_desc->region.space_id));
+ ACPI_REPORT_ERROR(("Region %s(%X) not implemented\n",
+ acpi_ut_get_region_name(rgn_desc->
+ region.
+ space_id),
+ rgn_desc->region.space_id));
} else if (status == AE_NOT_EXIST) {
ACPI_REPORT_ERROR(("Region %s(%X) has no handler\n",
acpi_ut_get_region_name(rgn_desc->
@@ -618,11 +599,10 @@
default:
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "write_with_update_rule: Unknown update_rule setting: %X\n",
- (obj_desc->common_field.
- field_flags &
- AML_FIELD_UPDATE_RULE_MASK)));
+ ACPI_REPORT_ERROR(("Unknown update_rule value: %X\n",
+ (obj_desc->common_field.
+ field_flags &
+ AML_FIELD_UPDATE_RULE_MASK)));
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
}
@@ -677,10 +657,7 @@
if (buffer_length <
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field size %X (bits) is too large for buffer (%X)\n",
- obj_desc->common_field.bit_length,
- buffer_length));
+ ACPI_REPORT_ERROR(("Field size %X (bits) is too large for buffer (%X)\n", obj_desc->common_field.bit_length, buffer_length));
return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
}
@@ -792,10 +769,7 @@
if (buffer_length <
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Field size %X (bits) is too large for buffer (%X)\n",
- obj_desc->common_field.bit_length,
- buffer_length));
+ ACPI_REPORT_ERROR(("Field size %X (bits) is too large for buffer (%X)\n", obj_desc->common_field.bit_length, buffer_length));
return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
}