drivers/regulator/rk808-regulator.c - kernel/msm-5.4 - Gitiles

 /*
  * Regulator driver for Rockchip RK808/RK818
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
  *
  * Copyright (C) 2016 PHYTEC Messtechnik GmbH
  *
  * Author: Wadim Egorov <w.egorov@phytec.de>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  */

 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/mfd/rk808.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/gpio/consumer.h>

 /* Field Definitions */
 #define RK808_BUCK_VSEL_MASK	0x3f
 #define RK808_BUCK4_VSEL_MASK	0xf
 #define RK808_LDO_VSEL_MASK	0x1f

 #define RK818_BUCK_VSEL_MASK		0x3f
 #define RK818_BUCK4_VSEL_MASK		0x1f
 #define RK818_LDO_VSEL_MASK		0x1f
 #define RK818_LDO3_ON_VSEL_MASK		0xf
 #define RK818_BOOST_ON_VSEL_MASK	0xe0

 /* Ramp rate definitions for buck1 / buck2 only */
 #define RK808_RAMP_RATE_OFFSET		3
 #define RK808_RAMP_RATE_MASK		(3 << RK808_RAMP_RATE_OFFSET)
 #define RK808_RAMP_RATE_2MV_PER_US	(0 << RK808_RAMP_RATE_OFFSET)
 #define RK808_RAMP_RATE_4MV_PER_US	(1 << RK808_RAMP_RATE_OFFSET)
 #define RK808_RAMP_RATE_6MV_PER_US	(2 << RK808_RAMP_RATE_OFFSET)
 #define RK808_RAMP_RATE_10MV_PER_US	(3 << RK808_RAMP_RATE_OFFSET)

 #define RK808_DVS2_POL		BIT(2)
 #define RK808_DVS1_POL		BIT(1)

 /* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
 #define RK808_SLP_REG_OFFSET 1

 /* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
 #define RK808_DVS_REG_OFFSET 2

 /* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
 #define RK808_SLP_SET_OFF_REG_OFFSET 2

 /* max steps for increase voltage of Buck1/2, equal 100mv*/
 #define MAX_STEPS_ONE_TIME 8

 #define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
 	_vmask, _ereg, _emask, _etime)					\
 	[_id] = {							\
 		.name		= (_match),				\
 		.supply_name	= (_supply),				\
 		.of_match	= of_match_ptr(_match),			\
 		.regulators_node = of_match_ptr("regulators"),		\
 		.type		= REGULATOR_VOLTAGE,			\
 		.id		= (_id),				\
 		.n_voltages	= (((_max) - (_min)) / (_step) + 1),	\
 		.owner		= THIS_MODULE,				\
 		.min_uV		= (_min) * 1000,			\
 		.uV_step	= (_step) * 1000,			\
 		.vsel_reg	= (_vreg),				\
 		.vsel_mask	= (_vmask),				\
 		.enable_reg	= (_ereg),				\
 		.enable_mask	= (_emask),				\
 		.enable_time	= (_etime),				\
 		.ops		= &rk808_reg_ops,			\
 	}

 #define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask)		\
 	[_id] = {							\
 		.name		= (_match),				\
 		.supply_name	= (_supply),				\
 		.of_match	= of_match_ptr(_match),			\
 		.regulators_node = of_match_ptr("regulators"),		\
 		.type		= REGULATOR_VOLTAGE,			\
 		.id		= (_id),				\
 		.enable_reg	= (_ereg),				\
 		.enable_mask	= (_emask),				\
 		.owner		= THIS_MODULE,				\
 		.ops		= &rk808_switch_ops			\
 	}


 struct rk808_regulator_data {
 	struct gpio_desc *dvs_gpio[2];
 };

 static const int rk808_buck_config_regs[] = {
 	RK808_BUCK1_CONFIG_REG,
 	RK808_BUCK2_CONFIG_REG,
 	RK808_BUCK3_CONFIG_REG,
 	RK808_BUCK4_CONFIG_REG,
 };

 static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
 	REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
 };

 static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
 	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 	unsigned int val;
 	int ret;

 	if (!gpio || gpiod_get_value(gpio) == 0)
 		return regulator_get_voltage_sel_regmap(rdev);

 	ret = regmap_read(rdev->regmap,
 			  rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
 			  &val);
 	if (ret != 0)
 		return ret;

 	val &= rdev->desc->vsel_mask;
 	val >>= ffs(rdev->desc->vsel_mask) - 1;

 	return val;
 }

 static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
 					     unsigned sel)
 {
 	int ret, delta_sel;
 	unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;

 	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
 	if (ret != 0)
 		return ret;

 	tmp = val & ~mask;
 	old_sel = val & mask;
 	old_sel >>= ffs(mask) - 1;
 	delta_sel = sel - old_sel;

 	/*
 	 * If directly modify the register to change the voltage, we will face
 	 * the risk of overshoot. Put it into a multi-step, can effectively
 	 * avoid this problem, a step is 100mv here.
 	 */
 	while (delta_sel > MAX_STEPS_ONE_TIME) {
 		old_sel += MAX_STEPS_ONE_TIME;
 		val = old_sel << (ffs(mask) - 1);
 		val |= tmp;

 		/*
 		 * i2c is 400kHz (2.5us per bit) and we must transmit _at least_
 		 * 3 bytes (24 bits) plus start and stop so 26 bits.  So we've
 		 * got more than 65 us between each voltage change and thus
 		 * won't ramp faster than ~1500 uV / us.
 		 */
 		ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
 		delta_sel = sel - old_sel;
 	}

 	sel <<= ffs(mask) - 1;
 	val = tmp | sel;
 	ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);

 	/*
 	 * When we change the voltage register directly, the ramp rate is about
 	 * 100000uv/us, wait 1us to make sure the target voltage to be stable,
 	 * so we needn't wait extra time after that.
 	 */
 	udelay(1);

 	return ret;
 }

 static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
 					 unsigned sel)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
 	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 	unsigned int reg = rdev->desc->vsel_reg;
 	unsigned old_sel;
 	int ret, gpio_level;

 	if (!gpio)
 		return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);

 	gpio_level = gpiod_get_value(gpio);
 	if (gpio_level == 0) {
 		reg += RK808_DVS_REG_OFFSET;
 		ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
 	} else {
 		ret = regmap_read(rdev->regmap,
 				  reg + RK808_DVS_REG_OFFSET,
 				  &old_sel);
 	}

 	if (ret != 0)
 		return ret;

 	sel <<= ffs(rdev->desc->vsel_mask) - 1;
 	sel |= old_sel & ~rdev->desc->vsel_mask;

 	ret = regmap_write(rdev->regmap, reg, sel);
 	if (ret)
 		return ret;

 	gpiod_set_value(gpio, !gpio_level);

 	return ret;
 }

 static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
 				       unsigned int old_selector,
 				       unsigned int new_selector)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
 	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];

 	/* if there is no dvs1/2 pin, we don't need wait extra time here. */
 	if (!gpio)
 		return 0;

 	return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
 }

 static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 {
 	unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
 	unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];

 	switch (ramp_delay) {
 	case 1 ... 2000:
 		ramp_value = RK808_RAMP_RATE_2MV_PER_US;
 		break;
 	case 2001 ... 4000:
 		ramp_value = RK808_RAMP_RATE_4MV_PER_US;
 		break;
 	case 4001 ... 6000:
 		ramp_value = RK808_RAMP_RATE_6MV_PER_US;
 		break;
 	case 6001 ... 10000:
 		break;
 	default:
 		pr_warn("%s ramp_delay: %d not supported, setting 10000\n",
 			rdev->desc->name, ramp_delay);
 	}

 	return regmap_update_bits(rdev->regmap, reg,
 				  RK808_RAMP_RATE_MASK, ramp_value);
 }

 static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
 {
 	unsigned int reg;
 	int sel = regulator_map_voltage_linear(rdev, uv, uv);

 	if (sel < 0)
 		return -EINVAL;

 	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;

 	return regmap_update_bits(rdev->regmap, reg,
 				  rdev->desc->vsel_mask,
 				  sel);
 }

 static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
 {
 	unsigned int reg;
 	int sel = regulator_map_voltage_linear_range(rdev, uv, uv);

 	if (sel < 0)
 		return -EINVAL;

 	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;

 	return regmap_update_bits(rdev->regmap, reg,
 				  rdev->desc->vsel_mask,
 				  sel);
 }

 static int rk808_set_suspend_enable(struct regulator_dev *rdev)
 {
 	unsigned int reg;

 	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;

 	return regmap_update_bits(rdev->regmap, reg,
 				  rdev->desc->enable_mask,
 				  0);
 }

 static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 {
 	unsigned int reg;

 	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;

 	return regmap_update_bits(rdev->regmap, reg,
 				  rdev->desc->enable_mask,
 				  rdev->desc->enable_mask);
 }

 static struct regulator_ops rk808_buck1_2_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.get_voltage_sel	= rk808_buck1_2_get_voltage_sel_regmap,
 	.set_voltage_sel	= rk808_buck1_2_set_voltage_sel,
 	.set_voltage_time_sel	= rk808_buck1_2_set_voltage_time_sel,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
 	.set_ramp_delay		= rk808_set_ramp_delay,
 	.set_suspend_voltage	= rk808_set_suspend_voltage,
 	.set_suspend_enable	= rk808_set_suspend_enable,
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };

 static struct regulator_ops rk808_reg_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
 	.set_suspend_voltage	= rk808_set_suspend_voltage,
 	.set_suspend_enable	= rk808_set_suspend_enable,
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };

 static struct regulator_ops rk808_reg_ops_ranges = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
 	.set_suspend_voltage	= rk808_set_suspend_voltage_range,
 	.set_suspend_enable	= rk808_set_suspend_enable,
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };

 static struct regulator_ops rk808_switch_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
 	.set_suspend_enable	= rk808_set_suspend_enable,
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };

 static const struct regulator_desc rk808_reg[] = {
 	{
 		.name = "DCDC_REG1",
 		.supply_name = "vcc1",
 		.of_match = of_match_ptr("DCDC_REG1"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC1,
 		.ops = &rk808_buck1_2_ops,
 		.type = REGULATOR_VOLTAGE,
 		.min_uV = 712500,
 		.uV_step = 12500,
 		.n_voltages = 64,
 		.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
 		.vsel_mask = RK808_BUCK_VSEL_MASK,
 		.enable_reg = RK808_DCDC_EN_REG,
 		.enable_mask = BIT(0),
 		.owner = THIS_MODULE,
 	}, {
 		.name = "DCDC_REG2",
 		.supply_name = "vcc2",
 		.of_match = of_match_ptr("DCDC_REG2"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC2,
 		.ops = &rk808_buck1_2_ops,
 		.type = REGULATOR_VOLTAGE,
 		.min_uV = 712500,
 		.uV_step = 12500,
 		.n_voltages = 64,
 		.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
 		.vsel_mask = RK808_BUCK_VSEL_MASK,
 		.enable_reg = RK808_DCDC_EN_REG,
 		.enable_mask = BIT(1),
 		.owner = THIS_MODULE,
 	}, {
 		.name = "DCDC_REG3",
 		.supply_name = "vcc3",
 		.of_match = of_match_ptr("DCDC_REG3"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC3,
 		.ops = &rk808_switch_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 1,
 		.enable_reg = RK808_DCDC_EN_REG,
 		.enable_mask = BIT(2),
 		.owner = THIS_MODULE,
 	},
 	RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
 		RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
 		RK808_DCDC_EN_REG, BIT(3), 0),
 	RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
 		RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
 		BIT(0), 400),
 	RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
 		RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
 		BIT(1), 400),
 	{
 		.name = "LDO_REG3",
 		.supply_name = "vcc7",
 		.of_match = of_match_ptr("LDO_REG3"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_LDO3,
 		.ops = &rk808_reg_ops_ranges,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 16,
 		.linear_ranges = rk808_ldo3_voltage_ranges,
 		.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
 		.vsel_reg = RK808_LDO3_ON_VSEL_REG,
 		.vsel_mask = RK808_BUCK4_VSEL_MASK,
 		.enable_reg = RK808_LDO_EN_REG,
 		.enable_mask = BIT(2),
 		.enable_time = 400,
 		.owner = THIS_MODULE,
 	},
 	RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
 		RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
 		BIT(3), 400),
 	RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
 		RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
 		BIT(4), 400),
 	RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
 		RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
 		BIT(5), 400),
 	RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
 		RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
 		BIT(6), 400),
 	RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
 		RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
 		BIT(7), 400),
 	RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
 		RK808_DCDC_EN_REG, BIT(5)),
 	RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
 		RK808_DCDC_EN_REG, BIT(6)),
 };

 static const struct regulator_desc rk818_reg[] = {
 	{
 		.name = "DCDC_REG1",
 		.supply_name = "vcc1",
 		.of_match = of_match_ptr("DCDC_REG1"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = RK818_ID_DCDC1,
 		.ops = &rk808_reg_ops,
 		.type = REGULATOR_VOLTAGE,
 		.min_uV = 712500,
 		.uV_step = 12500,
 		.n_voltages = 64,
 		.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
 		.vsel_mask = RK818_BUCK_VSEL_MASK,
 		.enable_reg = RK818_DCDC_EN_REG,
 		.enable_mask = BIT(0),
 		.owner = THIS_MODULE,
 	}, {
 		.name = "DCDC_REG2",
 		.supply_name = "vcc2",
 		.of_match = of_match_ptr("DCDC_REG2"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = RK818_ID_DCDC2,
 		.ops = &rk808_reg_ops,
 		.type = REGULATOR_VOLTAGE,
 		.min_uV = 712500,
 		.uV_step = 12500,
 		.n_voltages = 64,
 		.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
 		.vsel_mask = RK818_BUCK_VSEL_MASK,
 		.enable_reg = RK818_DCDC_EN_REG,
 		.enable_mask = BIT(1),
 		.owner = THIS_MODULE,
 	}, {
 		.name = "DCDC_REG3",
 		.supply_name = "vcc3",
 		.of_match = of_match_ptr("DCDC_REG3"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = RK818_ID_DCDC3,
 		.ops = &rk808_switch_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 1,
 		.enable_reg = RK818_DCDC_EN_REG,
 		.enable_mask = BIT(2),
 		.owner = THIS_MODULE,
 	},
 	RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
 		RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
 		RK818_DCDC_EN_REG, BIT(3), 0),
 	RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
 		RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
 		RK818_DCDC_EN_REG, BIT(4), 0),
 	RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
 		RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(0), 400),
 	RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
 		RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(1), 400),
 	{
 		.name = "LDO_REG3",
 		.supply_name = "vcc7",
 		.of_match = of_match_ptr("LDO_REG3"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = RK818_ID_LDO3,
 		.ops = &rk808_reg_ops_ranges,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 16,
 		.linear_ranges = rk808_ldo3_voltage_ranges,
 		.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
 		.vsel_reg = RK818_LDO3_ON_VSEL_REG,
 		.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
 		.enable_reg = RK818_LDO_EN_REG,
 		.enable_mask = BIT(2),
 		.enable_time = 400,
 		.owner = THIS_MODULE,
 	},
 	RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
 		RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(3), 400),
 	RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
 		RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(4), 400),
 	RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
 		RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(5), 400),
 	RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
 		RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(6), 400),
 	RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
 		RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(7), 400),
 	RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
 		RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
 		RK818_DCDC_EN_REG, BIT(5), 400),
 	RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
 		RK818_DCDC_EN_REG, BIT(6)),
 	RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
 		RK818_H5V_EN_REG, BIT(0)),
 	RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
 		RK818_DCDC_EN_REG, BIT(7)),
 };

 static int rk808_regulator_dt_parse_pdata(struct device *dev,
 				   struct device *client_dev,
 				   struct regmap *map,
 				   struct rk808_regulator_data *pdata)
 {
 	struct device_node *np;
 	int tmp, ret = 0, i;

 	np = of_get_child_by_name(client_dev->of_node, "regulators");
 	if (!np)
 		return -ENXIO;

 	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
 		pdata->dvs_gpio[i] =
 			devm_gpiod_get_index_optional(client_dev, "dvs", i,
 						      GPIOD_OUT_LOW);
 		if (IS_ERR(pdata->dvs_gpio[i])) {
 			ret = PTR_ERR(pdata->dvs_gpio[i]);
 			dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
 			goto dt_parse_end;
 		}

 		if (!pdata->dvs_gpio[i]) {
 			dev_warn(dev, "there is no dvs%d gpio\n", i);
 			continue;
 		}

 		tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
 		ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
 				gpiod_is_active_low(pdata->dvs_gpio[i]) ?
 				0 : tmp);
 	}

 dt_parse_end:
 	of_node_put(np);
 	return ret;
 }

 static int rk808_regulator_probe(struct platform_device *pdev)
 {
 	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
 	struct i2c_client *client = rk808->i2c;
 	struct regulator_config config = {};
 	struct regulator_dev *rk808_rdev;
 	struct rk808_regulator_data *pdata;
 	const struct regulator_desc *regulators;
 	int ret, i, nregulators;

 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;

 	ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
 					     rk808->regmap, pdata);
 	if (ret < 0)
 		return ret;

 	platform_set_drvdata(pdev, pdata);

 	switch (rk808->variant) {
 	case RK808_ID:
 		regulators = rk808_reg;
 		nregulators = RK808_NUM_REGULATORS;
 		break;
 	case RK818_ID:
 		regulators = rk818_reg;
 		nregulators = RK818_NUM_REGULATORS;
 		break;
 	default:
 		dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
 			rk808->variant);
 		return -EINVAL;
 	}

 	config.dev = &client->dev;
 	config.driver_data = pdata;
 	config.regmap = rk808->regmap;

 	/* Instantiate the regulators */
 	for (i = 0; i < nregulators; i++) {
 		rk808_rdev = devm_regulator_register(&pdev->dev,
 						     &regulators[i], &config);
 		if (IS_ERR(rk808_rdev)) {
 			dev_err(&client->dev,
 				"failed to register %d regulator\n", i);
 			return PTR_ERR(rk808_rdev);
 		}
 	}

 	return 0;
 }

 static struct platform_driver rk808_regulator_driver = {
 	.probe = rk808_regulator_probe,
 	.driver = {
 		.name = "rk808-regulator"
 	},
 };

 module_platform_driver(rk808_regulator_driver);

 MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs");
 MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
 MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
 MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:rk808-regulator");
	/*
	* Regulator driver for Rockchip RK808/RK818
	*
	* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
	*
	* Author: Chris Zhong <zyw@rock-chips.com>
	* Author: Zhang Qing <zhangqing@rock-chips.com>
	*
	* Copyright (C) 2016 PHYTEC Messtechnik GmbH
	*
	* Author: Wadim Egorov <w.egorov@phytec.de>
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*/

	#include <linux/delay.h>
	#include <linux/gpio.h>
	#include <linux/i2c.h>
	#include <linux/module.h>
	#include <linux/of_device.h>
	#include <linux/of_gpio.h>
	#include <linux/mfd/rk808.h>
	#include <linux/regulator/driver.h>
	#include <linux/regulator/of_regulator.h>
	#include <linux/gpio/consumer.h>

	/* Field Definitions */
	#define RK808_BUCK_VSEL_MASK 0x3f
	#define RK808_BUCK4_VSEL_MASK 0xf
	#define RK808_LDO_VSEL_MASK 0x1f

	#define RK818_BUCK_VSEL_MASK 0x3f
	#define RK818_BUCK4_VSEL_MASK 0x1f
	#define RK818_LDO_VSEL_MASK 0x1f
	#define RK818_LDO3_ON_VSEL_MASK 0xf
	#define RK818_BOOST_ON_VSEL_MASK 0xe0

	/* Ramp rate definitions for buck1 / buck2 only */
	#define RK808_RAMP_RATE_OFFSET 3
	#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
	#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET)
	#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET)
	#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
	#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)

	#define RK808_DVS2_POL BIT(2)
	#define RK808_DVS1_POL BIT(1)

	/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
	#define RK808_SLP_REG_OFFSET 1

	/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
	#define RK808_DVS_REG_OFFSET 2

	/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
	#define RK808_SLP_SET_OFF_REG_OFFSET 2

	/* max steps for increase voltage of Buck1/2, equal 100mv*/
	#define MAX_STEPS_ONE_TIME 8

	#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
	_vmask, _ereg, _emask, _etime) \
	[_id] = { \
	.name = (_match), \
	.supply_name = (_supply), \
	.of_match = of_match_ptr(_match), \
	.regulators_node = of_match_ptr("regulators"), \
	.type = REGULATOR_VOLTAGE, \
	.id = (_id), \
	.n_voltages = (((_max) - (_min)) / (_step) + 1), \
	.owner = THIS_MODULE, \
	.min_uV = (_min) * 1000, \
	.uV_step = (_step) * 1000, \
	.vsel_reg = (_vreg), \
	.vsel_mask = (_vmask), \
	.enable_reg = (_ereg), \
	.enable_mask = (_emask), \
	.enable_time = (_etime), \
	.ops = &rk808_reg_ops, \
	}

	#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
	[_id] = { \
	.name = (_match), \
	.supply_name = (_supply), \
	.of_match = of_match_ptr(_match), \
	.regulators_node = of_match_ptr("regulators"), \
	.type = REGULATOR_VOLTAGE, \
	.id = (_id), \
	.enable_reg = (_ereg), \
	.enable_mask = (_emask), \
	.owner = THIS_MODULE, \
	.ops = &rk808_switch_ops \
	}


	struct rk808_regulator_data {
	struct gpio_desc *dvs_gpio[2];
	};

	static const int rk808_buck_config_regs[] = {
	RK808_BUCK1_CONFIG_REG,
	RK808_BUCK2_CONFIG_REG,
	RK808_BUCK3_CONFIG_REG,
	RK808_BUCK4_CONFIG_REG,
	};

	static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
	REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
	REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
	};

	static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
	{
	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
	int id = rdev_get_id(rdev);
	struct gpio_desc *gpio = pdata->dvs_gpio[id];
	unsigned int val;
	int ret;

	if (!gpio \|\| gpiod_get_value(gpio) == 0)
	return regulator_get_voltage_sel_regmap(rdev);

	ret = regmap_read(rdev->regmap,
	rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
	&val);
	if (ret != 0)
	return ret;

	val &= rdev->desc->vsel_mask;
	val >>= ffs(rdev->desc->vsel_mask) - 1;

	return val;
	}

	static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
	unsigned sel)
	{
	int ret, delta_sel;
	unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;

	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
	if (ret != 0)
	return ret;

	tmp = val & ~mask;
	old_sel = val & mask;
	old_sel >>= ffs(mask) - 1;
	delta_sel = sel - old_sel;

	/*
	* If directly modify the register to change the voltage, we will face
	* the risk of overshoot. Put it into a multi-step, can effectively
	* avoid this problem, a step is 100mv here.
	*/
	while (delta_sel > MAX_STEPS_ONE_TIME) {
	old_sel += MAX_STEPS_ONE_TIME;
	val = old_sel << (ffs(mask) - 1);
	val \|= tmp;

	/*
	* i2c is 400kHz (2.5us per bit) and we must transmit _at least_
	* 3 bytes (24 bits) plus start and stop so 26 bits. So we've
	* got more than 65 us between each voltage change and thus
	* won't ramp faster than ~1500 uV / us.
	*/
	ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
	delta_sel = sel - old_sel;
	}

	sel <<= ffs(mask) - 1;
	val = tmp \| sel;
	ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);

	/*
	* When we change the voltage register directly, the ramp rate is about
	* 100000uv/us, wait 1us to make sure the target voltage to be stable,
	* so we needn't wait extra time after that.
	*/
	udelay(1);

	return ret;
	}

	static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
	unsigned sel)
	{
	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
	int id = rdev_get_id(rdev);
	struct gpio_desc *gpio = pdata->dvs_gpio[id];
	unsigned int reg = rdev->desc->vsel_reg;
	unsigned old_sel;
	int ret, gpio_level;

	if (!gpio)
	return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);

	gpio_level = gpiod_get_value(gpio);
	if (gpio_level == 0) {
	reg += RK808_DVS_REG_OFFSET;
	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
	} else {
	ret = regmap_read(rdev->regmap,
	reg + RK808_DVS_REG_OFFSET,
	&old_sel);
	}

	if (ret != 0)
	return ret;

	sel <<= ffs(rdev->desc->vsel_mask) - 1;
	sel \|= old_sel & ~rdev->desc->vsel_mask;

	ret = regmap_write(rdev->regmap, reg, sel);
	if (ret)
	return ret;

	gpiod_set_value(gpio, !gpio_level);

	return ret;
	}

	static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
	unsigned int old_selector,
	unsigned int new_selector)
	{
	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
	int id = rdev_get_id(rdev);
	struct gpio_desc *gpio = pdata->dvs_gpio[id];

	/* if there is no dvs1/2 pin, we don't need wait extra time here. */
	if (!gpio)
	return 0;

	return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
	}

	static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
	{
	unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
	unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];

	switch (ramp_delay) {
	case 1 ... 2000:
	ramp_value = RK808_RAMP_RATE_2MV_PER_US;
	break;
	case 2001 ... 4000:
	ramp_value = RK808_RAMP_RATE_4MV_PER_US;
	break;
	case 4001 ... 6000:
	ramp_value = RK808_RAMP_RATE_6MV_PER_US;
	break;
	case 6001 ... 10000:
	break;
	default:
	pr_warn("%s ramp_delay: %d not supported, setting 10000\n",
	rdev->desc->name, ramp_delay);
	}

	return regmap_update_bits(rdev->regmap, reg,
	RK808_RAMP_RATE_MASK, ramp_value);
	}

	static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
	{
	unsigned int reg;
	int sel = regulator_map_voltage_linear(rdev, uv, uv);

	if (sel < 0)
	return -EINVAL;

	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;

	return regmap_update_bits(rdev->regmap, reg,
	rdev->desc->vsel_mask,
	sel);
	}

	static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
	{
	unsigned int reg;
	int sel = regulator_map_voltage_linear_range(rdev, uv, uv);

	if (sel < 0)
	return -EINVAL;

	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;

	return regmap_update_bits(rdev->regmap, reg,
	rdev->desc->vsel_mask,
	sel);
	}

	static int rk808_set_suspend_enable(struct regulator_dev *rdev)
	{
	unsigned int reg;

	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;

	return regmap_update_bits(rdev->regmap, reg,
	rdev->desc->enable_mask,
	0);
	}

	static int rk808_set_suspend_disable(struct regulator_dev *rdev)
	{
	unsigned int reg;

	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;

	return regmap_update_bits(rdev->regmap, reg,
	rdev->desc->enable_mask,
	rdev->desc->enable_mask);
	}

	static struct regulator_ops rk808_buck1_2_ops = {
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
	.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
	.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
	.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,
	.is_enabled = regulator_is_enabled_regmap,
	.set_ramp_delay = rk808_set_ramp_delay,
	.set_suspend_voltage = rk808_set_suspend_voltage,
	.set_suspend_enable = rk808_set_suspend_enable,
	.set_suspend_disable = rk808_set_suspend_disable,
	};

	static struct regulator_ops rk808_reg_ops = {
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,
	.is_enabled = regulator_is_enabled_regmap,
	.set_suspend_voltage = rk808_set_suspend_voltage,
	.set_suspend_enable = rk808_set_suspend_enable,
	.set_suspend_disable = rk808_set_suspend_disable,
	};

	static struct regulator_ops rk808_reg_ops_ranges = {
	.list_voltage = regulator_list_voltage_linear_range,
	.map_voltage = regulator_map_voltage_linear_range,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,
	.is_enabled = regulator_is_enabled_regmap,
	.set_suspend_voltage = rk808_set_suspend_voltage_range,
	.set_suspend_enable = rk808_set_suspend_enable,
	.set_suspend_disable = rk808_set_suspend_disable,
	};

	static struct regulator_ops rk808_switch_ops = {
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,
	.is_enabled = regulator_is_enabled_regmap,
	.set_suspend_enable = rk808_set_suspend_enable,
	.set_suspend_disable = rk808_set_suspend_disable,
	};

	static const struct regulator_desc rk808_reg[] = {
	{
	.name = "DCDC_REG1",
	.supply_name = "vcc1",
	.of_match = of_match_ptr("DCDC_REG1"),
	.regulators_node = of_match_ptr("regulators"),
	.id = RK808_ID_DCDC1,
	.ops = &rk808_buck1_2_ops,
	.type = REGULATOR_VOLTAGE,
	.min_uV = 712500,
	.uV_step = 12500,
	.n_voltages = 64,
	.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
	.vsel_mask = RK808_BUCK_VSEL_MASK,
	.enable_reg = RK808_DCDC_EN_REG,
	.enable_mask = BIT(0),
	.owner = THIS_MODULE,
	}, {
	.name = "DCDC_REG2",
	.supply_name = "vcc2",
	.of_match = of_match_ptr("DCDC_REG2"),
	.regulators_node = of_match_ptr("regulators"),
	.id = RK808_ID_DCDC2,
	.ops = &rk808_buck1_2_ops,
	.type = REGULATOR_VOLTAGE,
	.min_uV = 712500,
	.uV_step = 12500,
	.n_voltages = 64,
	.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
	.vsel_mask = RK808_BUCK_VSEL_MASK,
	.enable_reg = RK808_DCDC_EN_REG,
	.enable_mask = BIT(1),
	.owner = THIS_MODULE,
	}, {
	.name = "DCDC_REG3",
	.supply_name = "vcc3",
	.of_match = of_match_ptr("DCDC_REG3"),
	.regulators_node = of_match_ptr("regulators"),
	.id = RK808_ID_DCDC3,
	.ops = &rk808_switch_ops,
	.type = REGULATOR_VOLTAGE,
	.n_voltages = 1,
	.enable_reg = RK808_DCDC_EN_REG,
	.enable_mask = BIT(2),
	.owner = THIS_MODULE,
	},
	RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
	RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
	RK808_DCDC_EN_REG, BIT(3), 0),
	RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
	RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	BIT(0), 400),
	RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
	RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	BIT(1), 400),
	{
	.name = "LDO_REG3",
	.supply_name = "vcc7",
	.of_match = of_match_ptr("LDO_REG3"),
	.regulators_node = of_match_ptr("regulators"),
	.id = RK808_ID_LDO3,
	.ops = &rk808_reg_ops_ranges,
	.type = REGULATOR_VOLTAGE,
	.n_voltages = 16,
	.linear_ranges = rk808_ldo3_voltage_ranges,
	.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
	.vsel_reg = RK808_LDO3_ON_VSEL_REG,
	.vsel_mask = RK808_BUCK4_VSEL_MASK,
	.enable_reg = RK808_LDO_EN_REG,
	.enable_mask = BIT(2),
	.enable_time = 400,
	.owner = THIS_MODULE,
	},
	RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
	RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	BIT(3), 400),
	RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
	RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	BIT(4), 400),
	RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
	RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	BIT(5), 400),
	RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
	RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	BIT(6), 400),
	RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
	RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	BIT(7), 400),
	RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
	RK808_DCDC_EN_REG, BIT(5)),
	RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
	RK808_DCDC_EN_REG, BIT(6)),
	};

	static const struct regulator_desc rk818_reg[] = {
	{
	.name = "DCDC_REG1",
	.supply_name = "vcc1",
	.of_match = of_match_ptr("DCDC_REG1"),
	.regulators_node = of_match_ptr("regulators"),
	.id = RK818_ID_DCDC1,
	.ops = &rk808_reg_ops,
	.type = REGULATOR_VOLTAGE,
	.min_uV = 712500,
	.uV_step = 12500,
	.n_voltages = 64,
	.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
	.vsel_mask = RK818_BUCK_VSEL_MASK,
	.enable_reg = RK818_DCDC_EN_REG,
	.enable_mask = BIT(0),
	.owner = THIS_MODULE,
	}, {
	.name = "DCDC_REG2",
	.supply_name = "vcc2",
	.of_match = of_match_ptr("DCDC_REG2"),
	.regulators_node = of_match_ptr("regulators"),
	.id = RK818_ID_DCDC2,
	.ops = &rk808_reg_ops,
	.type = REGULATOR_VOLTAGE,
	.min_uV = 712500,
	.uV_step = 12500,
	.n_voltages = 64,
	.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
	.vsel_mask = RK818_BUCK_VSEL_MASK,
	.enable_reg = RK818_DCDC_EN_REG,
	.enable_mask = BIT(1),
	.owner = THIS_MODULE,
	}, {
	.name = "DCDC_REG3",
	.supply_name = "vcc3",
	.of_match = of_match_ptr("DCDC_REG3"),
	.regulators_node = of_match_ptr("regulators"),
	.id = RK818_ID_DCDC3,
	.ops = &rk808_switch_ops,
	.type = REGULATOR_VOLTAGE,
	.n_voltages = 1,
	.enable_reg = RK818_DCDC_EN_REG,
	.enable_mask = BIT(2),
	.owner = THIS_MODULE,
	},
	RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
	RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
	RK818_DCDC_EN_REG, BIT(3), 0),
	RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
	RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
	RK818_DCDC_EN_REG, BIT(4), 0),
	RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
	RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
	BIT(0), 400),
	RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
	RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
	BIT(1), 400),
	{
	.name = "LDO_REG3",
	.supply_name = "vcc7",
	.of_match = of_match_ptr("LDO_REG3"),
	.regulators_node = of_match_ptr("regulators"),
	.id = RK818_ID_LDO3,
	.ops = &rk808_reg_ops_ranges,
	.type = REGULATOR_VOLTAGE,
	.n_voltages = 16,
	.linear_ranges = rk808_ldo3_voltage_ranges,
	.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
	.vsel_reg = RK818_LDO3_ON_VSEL_REG,
	.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
	.enable_reg = RK818_LDO_EN_REG,
	.enable_mask = BIT(2),
	.enable_time = 400,
	.owner = THIS_MODULE,
	},
	RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
	RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
	BIT(3), 400),
	RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
	RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
	BIT(4), 400),
	RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
	RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
	BIT(5), 400),
	RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
	RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
	BIT(6), 400),
	RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
	RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
	BIT(7), 400),
	RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
	RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
	RK818_DCDC_EN_REG, BIT(5), 400),
	RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
	RK818_DCDC_EN_REG, BIT(6)),
	RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
	RK818_H5V_EN_REG, BIT(0)),
	RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
	RK818_DCDC_EN_REG, BIT(7)),
	};

	static int rk808_regulator_dt_parse_pdata(struct device *dev,
	struct device *client_dev,
	struct regmap *map,
	struct rk808_regulator_data *pdata)
	{
	struct device_node *np;
	int tmp, ret = 0, i;

	np = of_get_child_by_name(client_dev->of_node, "regulators");
	if (!np)
	return -ENXIO;

	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
	pdata->dvs_gpio[i] =
	devm_gpiod_get_index_optional(client_dev, "dvs", i,
	GPIOD_OUT_LOW);
	if (IS_ERR(pdata->dvs_gpio[i])) {
	ret = PTR_ERR(pdata->dvs_gpio[i]);
	dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
	goto dt_parse_end;
	}

	if (!pdata->dvs_gpio[i]) {
	dev_warn(dev, "there is no dvs%d gpio\n", i);
	continue;
	}

	tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
	ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
	gpiod_is_active_low(pdata->dvs_gpio[i]) ?
	0 : tmp);
	}

	dt_parse_end:
	of_node_put(np);
	return ret;
	}

	static int rk808_regulator_probe(struct platform_device *pdev)
	{
	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
	struct i2c_client *client = rk808->i2c;
	struct regulator_config config = {};
	struct regulator_dev *rk808_rdev;
	struct rk808_regulator_data *pdata;
	const struct regulator_desc *regulators;
	int ret, i, nregulators;

	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
	return -ENOMEM;

	ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
	rk808->regmap, pdata);
	if (ret < 0)
	return ret;

	platform_set_drvdata(pdev, pdata);

	switch (rk808->variant) {
	case RK808_ID:
	regulators = rk808_reg;
	nregulators = RK808_NUM_REGULATORS;
	break;
	case RK818_ID:
	regulators = rk818_reg;
	nregulators = RK818_NUM_REGULATORS;
	break;
	default:
	dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
	rk808->variant);
	return -EINVAL;
	}

	config.dev = &client->dev;
	config.driver_data = pdata;
	config.regmap = rk808->regmap;

	/* Instantiate the regulators */
	for (i = 0; i < nregulators; i++) {
	rk808_rdev = devm_regulator_register(&pdev->dev,
	&regulators[i], &config);
	if (IS_ERR(rk808_rdev)) {
	dev_err(&client->dev,
	"failed to register %d regulator\n", i);
	return PTR_ERR(rk808_rdev);
	}
	}

	return 0;
	}

	static struct platform_driver rk808_regulator_driver = {
	.probe = rk808_regulator_probe,
	.driver = {
	.name = "rk808-regulator"
	},
	};

	module_platform_driver(rk808_regulator_driver);

	MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs");
	MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
	MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
	MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:rk808-regulator");