Merge branches 'x86/early-printk', 'x86/microcode' and 'core/objtool' into x86/urgent, to pick up simple topic branches
Signed-off-by: Ingo Molnar <mingo@kernel.org>
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index b90fe3b..81d1d5a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1068,7 +1068,7 @@
earlyprintk=serial[,0x...[,baudrate]]
earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
- earlyprintk=pciserial,bus:device.function[,baudrate]
+ earlyprintk=pciserial[,force],bus:device.function[,baudrate]
earlyprintk=xdbc[xhciController#]
earlyprintk is useful when the kernel crashes before
@@ -1100,6 +1100,10 @@
The sclp output can only be used on s390.
+ The optional "force" to "pciserial" enables use of a
+ PCI device even when its classcode is not of the
+ UART class.
+
edac_report= [HW,EDAC] Control how to report EDAC event
Format: {"on" | "off" | "force"}
on: enable EDAC to report H/W event. May be overridden
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index b9bc8a1..2637ff0 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -666,8 +666,8 @@ static ssize_t pf_show(struct device *dev,
}
static DEVICE_ATTR_WO(reload);
-static DEVICE_ATTR(version, 0400, version_show, NULL);
-static DEVICE_ATTR(processor_flags, 0400, pf_show, NULL);
+static DEVICE_ATTR(version, 0444, version_show, NULL);
+static DEVICE_ATTR(processor_flags, 0444, pf_show, NULL);
static struct attribute *mc_default_attrs[] = {
&dev_attr_version.attr,
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 5e801c8..374a52f 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -213,8 +213,9 @@ static unsigned int mem32_serial_in(unsigned long addr, int offset)
* early_pci_serial_init()
*
* This function is invoked when the early_printk param starts with "pciserial"
- * The rest of the param should be ",B:D.F,baud" where B, D & F describe the
- * location of a PCI device that must be a UART device.
+ * The rest of the param should be "[force],B:D.F,baud", where B, D & F describe
+ * the location of a PCI device that must be a UART device. "force" is optional
+ * and overrides the use of an UART device with a wrong PCI class code.
*/
static __init void early_pci_serial_init(char *s)
{
@@ -224,17 +225,23 @@ static __init void early_pci_serial_init(char *s)
u32 classcode, bar0;
u16 cmdreg;
char *e;
+ int force = 0;
-
- /*
- * First, part the param to get the BDF values
- */
if (*s == ',')
++s;
if (*s == 0)
return;
+ /* Force the use of an UART device with wrong class code */
+ if (!strncmp(s, "force,", 6)) {
+ force = 1;
+ s += 6;
+ }
+
+ /*
+ * Part the param to get the BDF values
+ */
bus = (u8)simple_strtoul(s, &e, 16);
s = e;
if (*s != ':')
@@ -253,7 +260,7 @@ static __init void early_pci_serial_init(char *s)
s++;
/*
- * Second, find the device from the BDF
+ * Find the device from the BDF
*/
cmdreg = read_pci_config(bus, slot, func, PCI_COMMAND);
classcode = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
@@ -264,8 +271,10 @@ static __init void early_pci_serial_init(char *s)
*/
if (((classcode >> 16 != PCI_CLASS_COMMUNICATION_MODEM) &&
(classcode >> 16 != PCI_CLASS_COMMUNICATION_SERIAL)) ||
- (((classcode >> 8) & 0xff) != 0x02)) /* 16550 I/F at BAR0 */
- return;
+ (((classcode >> 8) & 0xff) != 0x02)) /* 16550 I/F at BAR0 */ {
+ if (!force)
+ return;
+ }
/*
* Determine if it is IO or memory mapped
@@ -289,7 +298,7 @@ static __init void early_pci_serial_init(char *s)
}
/*
- * Lastly, initialize the hardware
+ * Initialize the hardware
*/
if (*s) {
if (strcmp(s, "nocfg") == 0)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 2928939..0414a0d 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -836,7 +836,7 @@ static int add_switch_table(struct objtool_file *file, struct instruction *insn,
struct symbol *pfunc = insn->func->pfunc;
unsigned int prev_offset = 0;
- list_for_each_entry_from(rela, &file->rodata->rela->rela_list, list) {
+ list_for_each_entry_from(rela, &table->rela_sec->rela_list, list) {
if (rela == next_table)
break;
@@ -926,6 +926,7 @@ static struct rela *find_switch_table(struct objtool_file *file,
{
struct rela *text_rela, *rodata_rela;
struct instruction *orig_insn = insn;
+ struct section *rodata_sec;
unsigned long table_offset;
/*
@@ -953,10 +954,13 @@ static struct rela *find_switch_table(struct objtool_file *file,
/* look for a relocation which references .rodata */
text_rela = find_rela_by_dest_range(insn->sec, insn->offset,
insn->len);
- if (!text_rela || text_rela->sym != file->rodata->sym)
+ if (!text_rela || text_rela->sym->type != STT_SECTION ||
+ !text_rela->sym->sec->rodata)
continue;
table_offset = text_rela->addend;
+ rodata_sec = text_rela->sym->sec;
+
if (text_rela->type == R_X86_64_PC32)
table_offset += 4;
@@ -964,10 +968,10 @@ static struct rela *find_switch_table(struct objtool_file *file,
* Make sure the .rodata address isn't associated with a
* symbol. gcc jump tables are anonymous data.
*/
- if (find_symbol_containing(file->rodata, table_offset))
+ if (find_symbol_containing(rodata_sec, table_offset))
continue;
- rodata_rela = find_rela_by_dest(file->rodata, table_offset);
+ rodata_rela = find_rela_by_dest(rodata_sec, table_offset);
if (rodata_rela) {
/*
* Use of RIP-relative switch jumps is quite rare, and
@@ -1052,7 +1056,7 @@ static int add_switch_table_alts(struct objtool_file *file)
struct symbol *func;
int ret;
- if (!file->rodata || !file->rodata->rela)
+ if (!file->rodata)
return 0;
for_each_sec(file, sec) {
@@ -1198,10 +1202,33 @@ static int read_retpoline_hints(struct objtool_file *file)
return 0;
}
+static void mark_rodata(struct objtool_file *file)
+{
+ struct section *sec;
+ bool found = false;
+
+ /*
+ * This searches for the .rodata section or multiple .rodata.func_name
+ * sections if -fdata-sections is being used. The .str.1.1 and .str.1.8
+ * rodata sections are ignored as they don't contain jump tables.
+ */
+ for_each_sec(file, sec) {
+ if (!strncmp(sec->name, ".rodata", 7) &&
+ !strstr(sec->name, ".str1.")) {
+ sec->rodata = true;
+ found = true;
+ }
+ }
+
+ file->rodata = found;
+}
+
static int decode_sections(struct objtool_file *file)
{
int ret;
+ mark_rodata(file);
+
ret = decode_instructions(file);
if (ret)
return ret;
@@ -2171,7 +2198,6 @@ int check(const char *_objname, bool orc)
INIT_LIST_HEAD(&file.insn_list);
hash_init(file.insn_hash);
file.whitelist = find_section_by_name(file.elf, ".discard.func_stack_frame_non_standard");
- file.rodata = find_section_by_name(file.elf, ".rodata");
file.c_file = find_section_by_name(file.elf, ".comment");
file.ignore_unreachables = no_unreachable;
file.hints = false;
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index 95700a2..e6e8a65 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -60,8 +60,8 @@ struct objtool_file {
struct elf *elf;
struct list_head insn_list;
DECLARE_HASHTABLE(insn_hash, 16);
- struct section *rodata, *whitelist;
- bool ignore_unreachables, c_file, hints;
+ struct section *whitelist;
+ bool ignore_unreachables, c_file, hints, rodata;
};
int check(const char *objname, bool orc);
diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index 7ec85d5..f7082de 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -379,6 +379,7 @@ static int read_relas(struct elf *elf)
rela->offset = rela->rela.r_offset;
symndx = GELF_R_SYM(rela->rela.r_info);
rela->sym = find_symbol_by_index(elf, symndx);
+ rela->rela_sec = sec;
if (!rela->sym) {
WARN("can't find rela entry symbol %d for %s",
symndx, sec->name);
diff --git a/tools/objtool/elf.h b/tools/objtool/elf.h
index de5cd2d..bc97ed8 100644
--- a/tools/objtool/elf.h
+++ b/tools/objtool/elf.h
@@ -48,7 +48,7 @@ struct section {
char *name;
int idx;
unsigned int len;
- bool changed, text;
+ bool changed, text, rodata;
};
struct symbol {
@@ -68,6 +68,7 @@ struct rela {
struct list_head list;
struct hlist_node hash;
GElf_Rela rela;
+ struct section *rela_sec;
struct symbol *sym;
unsigned int type;
unsigned long offset;