MIPS: Netlogic: Add support for XLP2XX
XLP2XX is first in the series of 28nm XLPII processors.
The changes are to:
* Add processor ID for XLP2XX to asm/cpu.h and kernel/cpu-probe.c.
* Add a cpu_is_xlpii() function to check for XLPII processors.
* Update xlp_mmu_init() to use config4 to enable extended TLB.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5698/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index c198615..71b9f19 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -179,6 +179,7 @@
#define PRID_IMP_NETLOGIC_XLP8XX 0x1000
#define PRID_IMP_NETLOGIC_XLP3XX 0x1100
+#define PRID_IMP_NETLOGIC_XLP2XX 0x1200
/*
* Definitions for 7:0 on legacy processors
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
index d59cdd6..7a4a514 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
@@ -64,5 +64,12 @@
/* Device tree related */
void *xlp_dt_init(void *fdtp);
+static inline int cpu_is_xlpii(void)
+{
+ int chip = read_c0_prid() & 0xff00;
+
+ return chip == PRID_IMP_NETLOGIC_XLP2XX;
+}
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_NLM_XLP_H */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 8e8feb8..37663c7 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -906,6 +906,11 @@
MIPS_CPU_LLSC);
switch (c->processor_id & 0xff00) {
+ case PRID_IMP_NETLOGIC_XLP2XX:
+ c->cputype = CPU_XLP;
+ __cpu_name[cpu] = "Broadcom XLPII";
+ break;
+
case PRID_IMP_NETLOGIC_XLP8XX:
case PRID_IMP_NETLOGIC_XLP3XX:
c->cputype = CPU_XLP;
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 7718368..76a7131 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -110,7 +110,12 @@
const char *get_system_type(void)
{
- return "Netlogic XLP Series";
+ switch (read_c0_prid() & 0xff00) {
+ case PRID_IMP_NETLOGIC_XLP2XX:
+ return "Broadcom XLPII Series";
+ default:
+ return "Netlogic XLP Series";
+ }
}
void __init prom_free_prom_memory(void)
@@ -120,12 +125,20 @@
void xlp_mmu_init(void)
{
- /* enable extended TLB and Large Fixed TLB */
- write_c0_config6(read_c0_config6() | 0x24);
+ u32 conf4;
- /* set page mask of Fixed TLB in config7 */
- write_c0_config7(PM_DEFAULT_MASK >>
- (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
+ if (cpu_is_xlpii()) {
+ /* XLPII series has extended pagesize in config 4 */
+ conf4 = read_c0_config4() & ~0x1f00u;
+ write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8));
+ } else {
+ /* enable extended TLB and Large Fixed TLB */
+ write_c0_config6(read_c0_config6() | 0x24);
+
+ /* set page mask of extended Fixed TLB in config7 */
+ write_c0_config7(PM_DEFAULT_MASK >>
+ (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
+ }
}
void nlm_percpu_init(int hwcpuid)