Merge branches 'acpi-tables', 'acpi-soc', 'acpi-apei' and 'acpi-misc'
* acpi-tables:
ACPI / tables: Add an ifdef around amlcode and dsdt_amlcode
ACPI / tables: add DSDT AmlCode new declaration name support
ACPI: SPCR: Consider baud rate 0 as preconfigured state
* acpi-soc:
ACPI / LPSS: Ignore acpi_device_fix_up_power() return value
ACPI / APD: Add clock frequency for Hisilicon Hip08 SPI controller
* acpi-apei:
ACPI/APEI: Clear GHES block_status before panic()
ACPI, APEI, EINJ: Change to use DEFINE_SHOW_ATTRIBUTE macro
* acpi-misc:
ACPI: fix acpi_find_child_device() invocation in acpi_preset_companion()
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 7cea769c..618afee 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -336,7 +336,7 @@
See Documentation/acpi/dsdt-override.txt
Enter the full path name to the file which includes the AmlCode
- declaration.
+ or dsdt_aml_code declaration.
If unsure, don't enter a file name.
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 2664452..ddf598a 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -166,6 +166,11 @@ static const struct apd_device_desc thunderx2_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 125000000,
};
+
+static const struct apd_device_desc hip08_spi_desc = {
+ .setup = acpi_apd_setup,
+ .fixed_clk_rate = 250000000,
+};
#endif
#else
@@ -234,6 +239,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
{ "CAV9007", APD_ADDR(thunderx2_i2c_desc) },
{ "HISI02A1", APD_ADDR(hip07_i2c_desc) },
{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
+ { "HISI0173", APD_ADDR(hip08_spi_desc) },
#endif
{ }
};
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index b9bda06..5f94c35 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -673,12 +673,7 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
* have _PS0 and _PS3 without _PSC (and no power resources), so
* acpi_bus_init_power() will assume that the BIOS has put them into D0.
*/
- ret = acpi_device_fix_up_power(adev);
- if (ret) {
- /* Skip the device, but continue the namespace scan. */
- ret = 0;
- goto err_out;
- }
+ acpi_device_fix_up_power(adev);
adev->driver_data = pdata;
pdev = acpi_create_platform_device(adev, dev_desc->properties);
diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c
index b38737c..fcccbfd 100644
--- a/drivers/acpi/apei/einj.c
+++ b/drivers/acpi/apei/einj.c
@@ -607,17 +607,7 @@ static int available_error_type_show(struct seq_file *m, void *v)
return 0;
}
-static int available_error_type_open(struct inode *inode, struct file *file)
-{
- return single_open(file, available_error_type_show, NULL);
-}
-
-static const struct file_operations available_error_type_fops = {
- .open = available_error_type_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(available_error_type);
static int error_type_get(void *data, u64 *val)
{
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 02c6fd9..f008ba7 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -691,6 +691,8 @@ static void __ghes_panic(struct ghes *ghes)
{
__ghes_print_estatus(KERN_EMERG, ghes->generic, ghes->estatus);
+ ghes_clear_estatus(ghes);
+
/* reboot to log the error! */
if (!panic_timeout)
panic_timeout = ghes_panic_timeout;
diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index 9d52743..c336784 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -148,6 +148,13 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
}
switch (table->baud_rate) {
+ case 0:
+ /*
+ * SPCR 1.04 defines 0 as a preconfigured state of UART.
+ * Assume firmware or bootloader configures console correctly.
+ */
+ baud_rate = 0;
+ break;
case 3:
baud_rate = 9600;
break;
@@ -196,6 +203,10 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
* UART so don't attempt to change to the baud rate state
* in the table because driver cannot calculate the dividers
*/
+ baud_rate = 0;
+ }
+
+ if (!baud_rate) {
snprintf(opts, sizeof(opts), "%s,%s,0x%llx", uart, iotype,
table->serial_port.address);
} else {
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 61203ee..48eabb6 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -712,6 +712,11 @@ acpi_os_physical_table_override(struct acpi_table_header *existing_table,
table_length);
}
+#ifdef CONFIG_ACPI_CUSTOM_DSDT
+static void *amlcode __attribute__ ((weakref("AmlCode")));
+static void *dsdt_amlcode __attribute__ ((weakref("dsdt_aml_code")));
+#endif
+
acpi_status
acpi_os_table_override(struct acpi_table_header *existing_table,
struct acpi_table_header **new_table)
@@ -722,8 +727,11 @@ acpi_os_table_override(struct acpi_table_header *existing_table,
*new_table = NULL;
#ifdef CONFIG_ACPI_CUSTOM_DSDT
- if (strncmp(existing_table->signature, "DSDT", 4) == 0)
- *new_table = (struct acpi_table_header *)AmlCode;
+ if (!strncmp(existing_table->signature, "DSDT", 4)) {
+ *new_table = (struct acpi_table_header *)&amlcode;
+ if (!(*new_table))
+ *new_table = (struct acpi_table_header *)&dsdt_amlcode;
+ }
#endif
if (*new_table != NULL)
acpi_table_taint(existing_table);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index ed80f14..f788cdb 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -101,7 +101,7 @@ static inline bool has_acpi_companion(struct device *dev)
static inline void acpi_preset_companion(struct device *dev,
struct acpi_device *parent, u64 addr)
{
- ACPI_COMPANION_SET(dev, acpi_find_child_device(parent, addr, NULL));
+ ACPI_COMPANION_SET(dev, acpi_find_child_device(parent, addr, false));
}
static inline const char *acpi_dev_name(struct acpi_device *adev)