drivers/i2c/busses/i2c-au1550.c - kernel/msm-5.4 - Gitiles

 /*
  * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface
  * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
  *
  * 2.6 port by Matt Porter <mporter@kernel.crashing.org>
  *
  * The documentation describes this as an SMBus controller, but it doesn't
  * understand any of the SMBus protocol in hardware.  It's really an I2C
  * controller that could emulate most of the SMBus in software.
  *
  * This is just a skeleton adapter to use with the Au1550 PSC
  * algorithm.  It was developed for the Pb1550, but will work with
  * any Au1550 board that has a similar PSC configuration.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
  * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */

 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>

 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>

 #include "i2c-au1550.h"

 static int
 wait_xfer_done(struct i2c_au1550_data *adap)
 {
 	u32	stat;
 	int	i;
 	volatile psc_smb_t	*sp;

 	sp = (volatile psc_smb_t *)(adap->psc_base);

 	/* Wait for Tx FIFO Underflow.
 	*/
 	for (i = 0; i < adap->xfer_timeout; i++) {
 		stat = sp->psc_smbevnt;
 		au_sync();
 		if ((stat & PSC_SMBEVNT_TU) != 0) {
 			/* Clear it.  */
 			sp->psc_smbevnt = PSC_SMBEVNT_TU;
 			au_sync();
 			return 0;
 		}
 		udelay(1);
 	}

 	return -ETIMEDOUT;
 }

 static int
 wait_ack(struct i2c_au1550_data *adap)
 {
 	u32	stat;
 	volatile psc_smb_t	*sp;

 	if (wait_xfer_done(adap))
 		return -ETIMEDOUT;

 	sp = (volatile psc_smb_t *)(adap->psc_base);

 	stat = sp->psc_smbevnt;
 	au_sync();

 	if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
 		return -ETIMEDOUT;

 	return 0;
 }

 static int
 wait_master_done(struct i2c_au1550_data *adap)
 {
 	u32	stat;
 	int	i;
 	volatile psc_smb_t	*sp;

 	sp = (volatile psc_smb_t *)(adap->psc_base);

 	/* Wait for Master Done.
 	*/
 	for (i = 0; i < adap->xfer_timeout; i++) {
 		stat = sp->psc_smbevnt;
 		au_sync();
 		if ((stat & PSC_SMBEVNT_MD) != 0)
 			return 0;
 		udelay(1);
 	}

 	return -ETIMEDOUT;
 }

 static int
 do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd)
 {
 	volatile psc_smb_t	*sp;
 	u32			stat;

 	sp = (volatile psc_smb_t *)(adap->psc_base);

 	/* Reset the FIFOs, clear events.
 	*/
 	sp->psc_smbpcr = PSC_SMBPCR_DC;
 	sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
 	au_sync();
 	do {
 		stat = sp->psc_smbpcr;
 		au_sync();
 	} while ((stat & PSC_SMBPCR_DC) != 0);

 	/* Write out the i2c chip address and specify operation
 	*/
 	addr <<= 1;
 	if (rd)
 		addr |= 1;

 	/* Put byte into fifo, start up master.
 	*/
 	sp->psc_smbtxrx = addr;
 	au_sync();
 	sp->psc_smbpcr = PSC_SMBPCR_MS;
 	au_sync();
 	if (wait_ack(adap))
 		return -EIO;
 	return 0;
 }

 static u32
 wait_for_rx_byte(struct i2c_au1550_data *adap, u32 *ret_data)
 {
 	int	j;
 	u32	data, stat;
 	volatile psc_smb_t	*sp;

 	if (wait_xfer_done(adap))
 		return -EIO;

 	sp = (volatile psc_smb_t *)(adap->psc_base);

 	j =  adap->xfer_timeout * 100;
 	do {
 		j--;
 		if (j <= 0)
 			return -EIO;

 		stat = sp->psc_smbstat;
 		au_sync();
 		if ((stat & PSC_SMBSTAT_RE) == 0)
 			j = 0;
 		else
 			udelay(1);
 	} while (j > 0);
 	data = sp->psc_smbtxrx;
 	au_sync();
 	*ret_data = data;

 	return 0;
 }

 static int
 i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
 		    unsigned int len)
 {
 	int	i;
 	u32	data;
 	volatile psc_smb_t	*sp;

 	if (len == 0)
 		return 0;

 	/* A read is performed by stuffing the transmit fifo with
 	 * zero bytes for timing, waiting for bytes to appear in the
 	 * receive fifo, then reading the bytes.
 	 */

 	sp = (volatile psc_smb_t *)(adap->psc_base);

 	i = 0;
 	while (i < (len-1)) {
 		sp->psc_smbtxrx = 0;
 		au_sync();
 		if (wait_for_rx_byte(adap, &data))
 			return -EIO;

 		buf[i] = data;
 		i++;
 	}

 	/* The last byte has to indicate transfer done.
 	*/
 	sp->psc_smbtxrx = PSC_SMBTXRX_STP;
 	au_sync();
 	if (wait_master_done(adap))
 		return -EIO;

 	data = sp->psc_smbtxrx;
 	au_sync();
 	buf[i] = data;
 	return 0;
 }

 static int
 i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
 		     unsigned int len)
 {
 	int	i;
 	u32	data;
 	volatile psc_smb_t	*sp;

 	if (len == 0)
 		return 0;

 	sp = (volatile psc_smb_t *)(adap->psc_base);

 	i = 0;
 	while (i < (len-1)) {
 		data = buf[i];
 		sp->psc_smbtxrx = data;
 		au_sync();
 		if (wait_ack(adap))
 			return -EIO;
 		i++;
 	}

 	/* The last byte has to indicate transfer done.
 	*/
 	data = buf[i];
 	data |= PSC_SMBTXRX_STP;
 	sp->psc_smbtxrx = data;
 	au_sync();
 	if (wait_master_done(adap))
 		return -EIO;
 	return 0;
 }

 static int
 au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 {
 	struct i2c_au1550_data *adap = i2c_adap->algo_data;
 	struct i2c_msg *p;
 	int i, err = 0;

 	for (i = 0; !err && i < num; i++) {
 		p = &msgs[i];
 		err = do_address(adap, p->addr, p->flags & I2C_M_RD);
 		if (err || !p->len)
 			continue;
 		if (p->flags & I2C_M_RD)
 			err = i2c_read(adap, p->buf, p->len);
 		else
 			err = i2c_write(adap, p->buf, p->len);
 	}

 	/* Return the number of messages processed, or the error code.
 	*/
 	if (err == 0)
 		err = num;
 	return err;
 }

 static u32
 au1550_func(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C;
 }

 static struct i2c_algorithm au1550_algo = {
 	.name		= "Au1550 algorithm",
 	.id		= I2C_ALGO_AU1550,
 	.master_xfer	= au1550_xfer,
 	.functionality	= au1550_func,
 };

 /*
  * registering functions to load algorithms at runtime
  * Prior to calling us, the 50MHz clock frequency and routing
  * must have been set up for the PSC indicated by the adapter.
  */
 int
 i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
 {
 	struct i2c_au1550_data *adap = i2c_adap->algo_data;
 	volatile psc_smb_t	*sp;
 	u32	stat;

 	i2c_adap->algo = &au1550_algo;

 	/* Now, set up the PSC for SMBus PIO mode.
 	*/
 	sp = (volatile psc_smb_t *)(adap->psc_base);
 	sp->psc_ctrl = PSC_CTRL_DISABLE;
 	au_sync();
 	sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
 	sp->psc_smbcfg = 0;
 	au_sync();
 	sp->psc_ctrl = PSC_CTRL_ENABLE;
 	au_sync();
 	do {
 		stat = sp->psc_smbstat;
 		au_sync();
 	} while ((stat & PSC_SMBSTAT_SR) == 0);

 	sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
 				PSC_SMBCFG_DD_DISABLE);

 	/* Divide by 8 to get a 6.25 MHz clock.  The later protocol
 	 * timings are based on this clock.
 	 */
 	sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
 	sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
 	au_sync();

 	/* Set the protocol timer values.  See Table 71 in the
 	 * Au1550 Data Book for standard timing values.
 	 */
 	sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
 		PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
 		PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
 		PSC_SMBTMR_SET_CH(15);
 	au_sync();

 	sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
 	do {
 		stat = sp->psc_smbstat;
 		au_sync();
 	} while ((stat & PSC_SMBSTAT_DR) == 0);

 	return i2c_add_adapter(i2c_adap);
 }


 int
 i2c_au1550_del_bus(struct i2c_adapter *adap)
 {
 	return i2c_del_adapter(adap);
 }

 static int
 pb1550_reg(struct i2c_client *client)
 {
 	return 0;
 }

 static int
 pb1550_unreg(struct i2c_client *client)
 {
 	return 0;
 }

 static struct i2c_au1550_data pb1550_i2c_info = {
 	SMBUS_PSC_BASE, 200, 200
 };

 static struct i2c_adapter pb1550_board_adapter = {
 	name:              "pb1550 adapter",
 	id:                I2C_HW_AU1550_PSC,
 	algo:              NULL,
 	algo_data:         &pb1550_i2c_info,
 	client_register:   pb1550_reg,
 	client_unregister: pb1550_unreg,
 };

 /* BIG hack to support the control interface on the Wolfson WM8731
  * audio codec on the Pb1550 board.  We get an address and two data
  * bytes to write, create an i2c message, and send it across the
  * i2c transfer function.  We do this here because we have access to
  * the i2c adapter structure.
  */
 static struct i2c_msg wm_i2c_msg;  /* We don't want this stuff on the stack */
 static	u8 i2cbuf[2];

 int
 pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
 {
 	wm_i2c_msg.addr = addr;
 	wm_i2c_msg.flags = 0;
 	wm_i2c_msg.buf = i2cbuf;
 	wm_i2c_msg.len = 2;
 	i2cbuf[0] = reg;
 	i2cbuf[1] = val;

 	return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
 }

 static int __init
 i2c_au1550_init(void)
 {
 	printk(KERN_INFO "Au1550 I2C: ");

 	/* This is where we would set up a 50MHz clock source
 	 * and routing.  On the Pb1550, the SMBus is PSC2, which
 	 * uses a shared clock with USB.  This has been already
 	 * configured by Yamon as a 48MHz clock, close enough
 	 * for our work.
 	 */
         if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) {
 		printk("failed to initialize.\n");
                 return -ENODEV;
 	}

 	printk("initialized.\n");
 	return 0;
 }

 static void __exit
 i2c_au1550_exit(void)
 {
 	i2c_au1550_del_bus(&pb1550_board_adapter);
 }

 MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
 MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550");
 MODULE_LICENSE("GPL");

 module_init (i2c_au1550_init);
 module_exit (i2c_au1550_exit);
	/*
	* i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface
	* Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
	*
	* 2.6 port by Matt Porter <mporter@kernel.crashing.org>
	*
	* The documentation describes this as an SMBus controller, but it doesn't
	* understand any of the SMBus protocol in hardware. It's really an I2C
	* controller that could emulate most of the SMBus in software.
	*
	* This is just a skeleton adapter to use with the Au1550 PSC
	* algorithm. It was developed for the Pb1550, but will work with
	* any Au1550 board that has a similar PSC configuration.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version 2
	* of the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	#include <linux/delay.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/errno.h>
	#include <linux/i2c.h>

	#include <asm/mach-au1x00/au1000.h>
	#include <asm/mach-pb1x00/pb1550.h>
	#include <asm/mach-au1x00/au1xxx_psc.h>

	#include "i2c-au1550.h"

	static int
	wait_xfer_done(struct i2c_au1550_data *adap)
	{
	u32 stat;
	int i;
	volatile psc_smb_t *sp;

	sp = (volatile psc_smb_t *)(adap->psc_base);

	/* Wait for Tx FIFO Underflow.
	*/
	for (i = 0; i < adap->xfer_timeout; i++) {
	stat = sp->psc_smbevnt;
	au_sync();
	if ((stat & PSC_SMBEVNT_TU) != 0) {
	/* Clear it. */
	sp->psc_smbevnt = PSC_SMBEVNT_TU;
	au_sync();
	return 0;
	}
	udelay(1);
	}

	return -ETIMEDOUT;
	}

	static int
	wait_ack(struct i2c_au1550_data *adap)
	{
	u32 stat;
	volatile psc_smb_t *sp;

	if (wait_xfer_done(adap))
	return -ETIMEDOUT;

	sp = (volatile psc_smb_t *)(adap->psc_base);

	stat = sp->psc_smbevnt;
	au_sync();

	if ((stat & (PSC_SMBEVNT_DN \| PSC_SMBEVNT_AN \| PSC_SMBEVNT_AL)) != 0)
	return -ETIMEDOUT;

	return 0;
	}

	static int
	wait_master_done(struct i2c_au1550_data *adap)
	{
	u32 stat;
	int i;
	volatile psc_smb_t *sp;

	sp = (volatile psc_smb_t *)(adap->psc_base);

	/* Wait for Master Done.
	*/
	for (i = 0; i < adap->xfer_timeout; i++) {
	stat = sp->psc_smbevnt;
	au_sync();
	if ((stat & PSC_SMBEVNT_MD) != 0)
	return 0;
	udelay(1);
	}

	return -ETIMEDOUT;
	}

	static int
	do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd)
	{
	volatile psc_smb_t *sp;
	u32 stat;

	sp = (volatile psc_smb_t *)(adap->psc_base);

	/* Reset the FIFOs, clear events.
	*/
	sp->psc_smbpcr = PSC_SMBPCR_DC;
	sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
	au_sync();
	do {
	stat = sp->psc_smbpcr;
	au_sync();
	} while ((stat & PSC_SMBPCR_DC) != 0);

	/* Write out the i2c chip address and specify operation
	*/
	addr <<= 1;
	if (rd)
	addr \|= 1;

	/* Put byte into fifo, start up master.
	*/
	sp->psc_smbtxrx = addr;
	au_sync();
	sp->psc_smbpcr = PSC_SMBPCR_MS;
	au_sync();
	if (wait_ack(adap))
	return -EIO;
	return 0;
	}

	static u32
	wait_for_rx_byte(struct i2c_au1550_data adap, u32 ret_data)
	{
	int j;
	u32 data, stat;
	volatile psc_smb_t *sp;

	if (wait_xfer_done(adap))
	return -EIO;

	sp = (volatile psc_smb_t *)(adap->psc_base);

	j = adap->xfer_timeout * 100;
	do {
	j--;
	if (j <= 0)
	return -EIO;

	stat = sp->psc_smbstat;
	au_sync();
	if ((stat & PSC_SMBSTAT_RE) == 0)
	j = 0;
	else
	udelay(1);
	} while (j > 0);
	data = sp->psc_smbtxrx;
	au_sync();
	*ret_data = data;

	return 0;
	}

	static int
	i2c_read(struct i2c_au1550_data adap, unsigned char buf,
	unsigned int len)
	{
	int i;
	u32 data;
	volatile psc_smb_t *sp;

	if (len == 0)
	return 0;

	/* A read is performed by stuffing the transmit fifo with
	* zero bytes for timing, waiting for bytes to appear in the
	* receive fifo, then reading the bytes.
	*/

	sp = (volatile psc_smb_t *)(adap->psc_base);

	i = 0;
	while (i < (len-1)) {
	sp->psc_smbtxrx = 0;
	au_sync();
	if (wait_for_rx_byte(adap, &data))
	return -EIO;

	buf[i] = data;
	i++;
	}

	/* The last byte has to indicate transfer done.
	*/
	sp->psc_smbtxrx = PSC_SMBTXRX_STP;
	au_sync();
	if (wait_master_done(adap))
	return -EIO;

	data = sp->psc_smbtxrx;
	au_sync();
	buf[i] = data;
	return 0;
	}

	static int
	i2c_write(struct i2c_au1550_data adap, unsigned char buf,
	unsigned int len)
	{
	int i;
	u32 data;
	volatile psc_smb_t *sp;

	if (len == 0)
	return 0;

	sp = (volatile psc_smb_t *)(adap->psc_base);

	i = 0;
	while (i < (len-1)) {
	data = buf[i];
	sp->psc_smbtxrx = data;
	au_sync();
	if (wait_ack(adap))
	return -EIO;
	i++;
	}

	/* The last byte has to indicate transfer done.
	*/
	data = buf[i];
	data \|= PSC_SMBTXRX_STP;
	sp->psc_smbtxrx = data;
	au_sync();
	if (wait_master_done(adap))
	return -EIO;
	return 0;
	}

	static int
	au1550_xfer(struct i2c_adapter i2c_adap, struct i2c_msg msgs, int num)
	{
	struct i2c_au1550_data *adap = i2c_adap->algo_data;
	struct i2c_msg *p;
	int i, err = 0;

	for (i = 0; !err && i < num; i++) {
	p = &msgs[i];
	err = do_address(adap, p->addr, p->flags & I2C_M_RD);
	if (err \|\| !p->len)
	continue;
	if (p->flags & I2C_M_RD)
	err = i2c_read(adap, p->buf, p->len);
	else
	err = i2c_write(adap, p->buf, p->len);
	}

	/* Return the number of messages processed, or the error code.
	*/
	if (err == 0)
	err = num;
	return err;
	}

	static u32
	au1550_func(struct i2c_adapter *adap)
	{
	return I2C_FUNC_I2C;
	}

	static struct i2c_algorithm au1550_algo = {
	.name = "Au1550 algorithm",
	.id = I2C_ALGO_AU1550,
	.master_xfer = au1550_xfer,
	.functionality = au1550_func,
	};

	/*
	* registering functions to load algorithms at runtime
	* Prior to calling us, the 50MHz clock frequency and routing
	* must have been set up for the PSC indicated by the adapter.
	*/
	int
	i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
	{
	struct i2c_au1550_data *adap = i2c_adap->algo_data;
	volatile psc_smb_t *sp;
	u32 stat;

	i2c_adap->algo = &au1550_algo;

	/* Now, set up the PSC for SMBus PIO mode.
	*/
	sp = (volatile psc_smb_t *)(adap->psc_base);
	sp->psc_ctrl = PSC_CTRL_DISABLE;
	au_sync();
	sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
	sp->psc_smbcfg = 0;
	au_sync();
	sp->psc_ctrl = PSC_CTRL_ENABLE;
	au_sync();
	do {
	stat = sp->psc_smbstat;
	au_sync();
	} while ((stat & PSC_SMBSTAT_SR) == 0);

	sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 \| PSC_SMBCFG_TT_FIFO8 \|
	PSC_SMBCFG_DD_DISABLE);

	/* Divide by 8 to get a 6.25 MHz clock. The later protocol
	* timings are based on this clock.
	*/
	sp->psc_smbcfg \|= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
	sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
	au_sync();

	/* Set the protocol timer values. See Table 71 in the
	* Au1550 Data Book for standard timing values.
	*/
	sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) \| PSC_SMBTMR_SET_PS(15) \| \
	PSC_SMBTMR_SET_PU(15) \| PSC_SMBTMR_SET_SH(15) \| \
	PSC_SMBTMR_SET_SU(15) \| PSC_SMBTMR_SET_CL(15) \| \
	PSC_SMBTMR_SET_CH(15);
	au_sync();

	sp->psc_smbcfg \|= PSC_SMBCFG_DE_ENABLE;
	do {
	stat = sp->psc_smbstat;
	au_sync();
	} while ((stat & PSC_SMBSTAT_DR) == 0);

	return i2c_add_adapter(i2c_adap);
	}


	int
	i2c_au1550_del_bus(struct i2c_adapter *adap)
	{
	return i2c_del_adapter(adap);
	}

	static int
	pb1550_reg(struct i2c_client *client)
	{
	return 0;
	}

	static int
	pb1550_unreg(struct i2c_client *client)
	{
	return 0;
	}

	static struct i2c_au1550_data pb1550_i2c_info = {
	SMBUS_PSC_BASE, 200, 200
	};

	static struct i2c_adapter pb1550_board_adapter = {
	name: "pb1550 adapter",
	id: I2C_HW_AU1550_PSC,
	algo: NULL,
	algo_data: &pb1550_i2c_info,
	client_register: pb1550_reg,
	client_unregister: pb1550_unreg,
	};

	/* BIG hack to support the control interface on the Wolfson WM8731
	* audio codec on the Pb1550 board. We get an address and two data
	* bytes to write, create an i2c message, and send it across the
	* i2c transfer function. We do this here because we have access to
	* the i2c adapter structure.
	*/
	static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */
	static u8 i2cbuf[2];

	int
	pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
	{
	wm_i2c_msg.addr = addr;
	wm_i2c_msg.flags = 0;
	wm_i2c_msg.buf = i2cbuf;
	wm_i2c_msg.len = 2;
	i2cbuf[0] = reg;
	i2cbuf[1] = val;

	return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
	}

	static int __init
	i2c_au1550_init(void)
	{
	printk(KERN_INFO "Au1550 I2C: ");

	/* This is where we would set up a 50MHz clock source
	* and routing. On the Pb1550, the SMBus is PSC2, which
	* uses a shared clock with USB. This has been already
	* configured by Yamon as a 48MHz clock, close enough
	* for our work.
	*/
	if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) {
	printk("failed to initialize.\n");
	return -ENODEV;
	}

	printk("initialized.\n");
	return 0;
	}

	static void __exit
	i2c_au1550_exit(void)
	{
	i2c_au1550_del_bus(&pb1550_board_adapter);
	}

	MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
	MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550");
	MODULE_LICENSE("GPL");

	module_init (i2c_au1550_init);
	module_exit (i2c_au1550_exit);