fbdev: kconfig update
Update Kconfig for Permedia 2, Trident and 3Dfx frame buffer drivers.
[akpm@linux-foundation.org: fix Kconfig text]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b218ac5..e63e564 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -254,16 +254,24 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
- This is the frame buffer device driver for the Permedia2 AGP frame
- buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
- product page at
- <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
+ This is the frame buffer device driver for cards based on
+ the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+ The driver was tested on the following cards:
+ Diamond FireGL 1000 PRO AGP
+ ELSA Gloria Synergy PCI
+ Appian Jeronimo PRO (both heads) PCI
+ 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+ Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+ ASK Graphic Blaster Exxtreme AGP
+
+ To compile this driver as a module, choose M here: the
+ module will be called pm2fb.
config FB_PM2_FIFO_DISCONNECT
bool "enable FIFO disconnect feature"
depends on FB_PM2 && PCI
help
- Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
+ Support the Permedia2 FIFO disconnect feature.
config FB_ARMCLCD
tristate "ARM PrimeCell PL110 support"
@@ -1539,25 +1547,25 @@
module will be called kyrofb.
config FB_3DFX
- tristate "3Dfx Banshee/Voodoo3 display support"
+ tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
depends on FB && PCI
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
help
- This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
- chips. Say Y if you have such a graphics board.
+ This driver supports graphics boards with the 3Dfx Banshee,
+ Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+ such a graphics board.
To compile this driver as a module, choose M here: the
module will be called tdfxfb.
config FB_3DFX_ACCEL
- bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
+ bool "3Dfx Acceleration functions (EXPERIMENTAL)"
depends on FB_3DFX && EXPERIMENTAL
---help---
- This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
- with acceleration functions.
-
+ This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+ device driver with acceleration functions.
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
@@ -1622,17 +1630,16 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
- This driver is supposed to support graphics boards with the
- Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
+ This is the frame buffer device driver for Trident PCI/AGP chipsets.
+ Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+ and Blade XP.
+ There are also integrated versions of these chips called CyberXXXX,
+ CyberImage or CyberBlade. These chips are mostly found in laptops
but also on some motherboards. For more information, read
<file:Documentation/fb/tridentfb.txt>
- Cyberblade/i1 support will be removed soon, use the cyblafb driver
- instead.
-
Say Y if you have such a graphics board.
-
To compile this driver as a module, choose M here: the
module will be called tridentfb.