usb: Using correct way to clear usb3.0 device's remote wakeup feature.
Usb3.0 device defines function remote wakeup which is only for interface
recipient rather than device recipient. This is different with usb2.0 device's
remote wakeup feature which is defined for device recipient. According usb3.0
spec 9.4.5, the function remote wakeup can be modified by the SetFeature()
requests using the FUNCTION_SUSPEND feature selector. This patch is to use
correct way to disable usb3.0 device's function remote wakeup after suspend
error and resuming.
This should be backported to kernels as old as 3.4, that contain the
commit 623bef9e03a60adc623b09673297ca7a1cdfb367 "USB/xhci: Enable remote
wakeup for USB3 devices."
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 957ed2c..cbf7168 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2838,6 +2838,23 @@
EXPORT_SYMBOL_GPL(usb_enable_ltm);
#ifdef CONFIG_USB_SUSPEND
+/*
+ * usb_disable_function_remotewakeup - disable usb3.0
+ * device's function remote wakeup
+ * @udev: target device
+ *
+ * Assume there's only one function on the USB 3.0
+ * device and disable remote wake for the first
+ * interface. FIXME if the interface association
+ * descriptor shows there's more than one function.
+ */
+static int usb_disable_function_remotewakeup(struct usb_device *udev)
+{
+ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE,
+ USB_INTRF_FUNC_SUSPEND, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+}
/*
* usb_port_suspend - suspend a usb device's upstream port
@@ -2955,12 +2972,19 @@
dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
port1, status);
/* paranoia: "should not happen" */
- if (udev->do_remote_wakeup)
- (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
+ if (udev->do_remote_wakeup) {
+ if (!hub_is_superspeed(hub->hdev)) {
+ (void) usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else
+ (void) usb_disable_function_remotewakeup(udev);
+
+ }
/* Try to enable USB2 hardware LPM again */
if (udev->usb2_hw_lpm_capable == 1)
@@ -3052,20 +3076,30 @@
* udev->reset_resume
*/
} else if (udev->actconfig && !udev->reset_resume) {
- le16_to_cpus(&devstatus);
- if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
- status = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- USB_REQ_CLEAR_FEATURE,
+ if (!hub_is_superspeed(udev->parent)) {
+ le16_to_cpus(&devstatus);
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
+ status = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- if (status)
- dev_dbg(&udev->dev,
- "disable remote wakeup, status %d\n",
- status);
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ status = usb_get_status(udev, USB_RECIP_INTERFACE, 0,
+ &devstatus);
+ le16_to_cpus(&devstatus);
+ if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP
+ | USB_INTRF_STAT_FUNC_RW))
+ status =
+ usb_disable_function_remotewakeup(udev);
}
+
+ if (status)
+ dev_dbg(&udev->dev,
+ "disable remote wakeup, status %d\n",
+ status);
status = 0;
}
return status;