[PATCH] slab: remove SLAB_ATOMIC
SLAB_ATOMIC is an alias of GFP_ATOMIC
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index bf42818..9f52429 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -1988,7 +1988,7 @@
goto fail1;
aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
- SLAB_ATOMIC, &aiptek->data_dma);
+ GFP_ATOMIC, &aiptek->data_dma);
if (!aiptek->data)
goto fail1;
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index ff23318..b724e36 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -592,7 +592,7 @@
__FUNCTION__, urb->status);
}
- retval = usb_submit_urb(urb, SLAB_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
__FUNCTION__, retval);
@@ -604,12 +604,12 @@
static int ati_remote_alloc_buffers(struct usb_device *udev,
struct ati_remote *ati_remote)
{
- ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
+ ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
&ati_remote->inbuf_dma);
if (!ati_remote->inbuf)
return -1;
- ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
+ ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
&ati_remote->outbuf_dma);
if (!ati_remote->outbuf)
return -1;
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 4295bab..f1d0e1d 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1079,7 +1079,7 @@
warn("input irq status %d received", urb->status);
}
- status = usb_submit_urb(urb, SLAB_ATOMIC);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
clear_bit(HID_IN_RUNNING, &hid->iofl);
if (status != -EPERM) {
@@ -1864,13 +1864,13 @@
static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
{
- if (!(hid->inbuf = usb_buffer_alloc(dev, hid->bufsize, SLAB_ATOMIC, &hid->inbuf_dma)))
+ if (!(hid->inbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->inbuf_dma)))
return -1;
- if (!(hid->outbuf = usb_buffer_alloc(dev, hid->bufsize, SLAB_ATOMIC, &hid->outbuf_dma)))
+ if (!(hid->outbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->outbuf_dma)))
return -1;
- if (!(hid->cr = usb_buffer_alloc(dev, sizeof(*(hid->cr)), SLAB_ATOMIC, &hid->cr_dma)))
+ if (!(hid->cr = usb_buffer_alloc(dev, sizeof(*(hid->cr)), GFP_ATOMIC, &hid->cr_dma)))
return -1;
- if (!(hid->ctrlbuf = usb_buffer_alloc(dev, hid->bufsize, SLAB_ATOMIC, &hid->ctrlbuf_dma)))
+ if (!(hid->ctrlbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->ctrlbuf_dma)))
return -1;
return 0;
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index 50aa810..98bd323 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -456,7 +456,7 @@
remote->in_endpoint = endpoint;
remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
- remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
+ remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
if (!remote->in_buffer) {
retval = -ENOMEM;
goto fail1;
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
index 79a85d4..92c4e07 100644
--- a/drivers/usb/input/mtouchusb.c
+++ b/drivers/usb/input/mtouchusb.c
@@ -164,7 +164,7 @@
dbg("%s - called", __FUNCTION__);
mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_DATA_SIZE,
- SLAB_ATOMIC, &mtouch->data_dma);
+ GFP_ATOMIC, &mtouch->data_dma);
if (!mtouch->data)
return -1;
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
index 0bf9177..fea97e5 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/usb/input/powermate.c
@@ -277,12 +277,12 @@
static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm)
{
pm->data = usb_buffer_alloc(udev, POWERMATE_PAYLOAD_SIZE_MAX,
- SLAB_ATOMIC, &pm->data_dma);
+ GFP_ATOMIC, &pm->data_dma);
if (!pm->data)
return -1;
pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)),
- SLAB_ATOMIC, &pm->configcr_dma);
+ GFP_ATOMIC, &pm->configcr_dma);
if (!pm->configcr)
return -1;
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 05c0d1c..2a314b0 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -248,7 +248,7 @@
struct touchkit_usb *touchkit)
{
touchkit->data = usb_buffer_alloc(udev, TOUCHKIT_REPORT_DATA_SIZE,
- SLAB_ATOMIC, &touchkit->data_dma);
+ GFP_ATOMIC, &touchkit->data_dma);
if (!touchkit->data)
return -1;
diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c
index dac8864..8505824 100644
--- a/drivers/usb/input/usbkbd.c
+++ b/drivers/usb/input/usbkbd.c
@@ -122,7 +122,7 @@
memcpy(kbd->old, kbd->new, 8);
resubmit:
- i = usb_submit_urb (urb, SLAB_ATOMIC);
+ i = usb_submit_urb (urb, GFP_ATOMIC);
if (i)
err ("can't resubmit intr, %s-%s/input0, status %d",
kbd->usbdev->bus->bus_name,
@@ -196,11 +196,11 @@
return -1;
if (!(kbd->led = usb_alloc_urb(0, GFP_KERNEL)))
return -1;
- if (!(kbd->new = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &kbd->new_dma)))
+ if (!(kbd->new = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &kbd->new_dma)))
return -1;
- if (!(kbd->cr = usb_buffer_alloc(dev, sizeof(struct usb_ctrlrequest), SLAB_ATOMIC, &kbd->cr_dma)))
+ if (!(kbd->cr = usb_buffer_alloc(dev, sizeof(struct usb_ctrlrequest), GFP_ATOMIC, &kbd->cr_dma)))
return -1;
- if (!(kbd->leds = usb_buffer_alloc(dev, 1, SLAB_ATOMIC, &kbd->leds_dma)))
+ if (!(kbd->leds = usb_buffer_alloc(dev, 1, GFP_ATOMIC, &kbd->leds_dma)))
return -1;
return 0;
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
index 68a55642..64a33e4 100644
--- a/drivers/usb/input/usbmouse.c
+++ b/drivers/usb/input/usbmouse.c
@@ -86,7 +86,7 @@
input_sync(dev);
resubmit:
- status = usb_submit_urb (urb, SLAB_ATOMIC);
+ status = usb_submit_urb (urb, GFP_ATOMIC);
if (status)
err ("can't resubmit intr, %s-%s/input0, status %d",
mouse->usbdev->bus->bus_name,
@@ -137,7 +137,7 @@
if (!mouse || !input_dev)
goto fail1;
- mouse->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &mouse->data_dma);
+ mouse->data = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &mouse->data_dma);
if (!mouse->data)
goto fail1;
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index df97e5c..e4bc76e 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -325,7 +325,7 @@
goto fail1;
xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
- SLAB_ATOMIC, &xpad->idata_dma);
+ GFP_ATOMIC, &xpad->idata_dma);
if (!xpad->idata)
goto fail1;
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 2268ca3..caff8e6 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -874,17 +874,17 @@
/* allocate usb buffers */
yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
- SLAB_ATOMIC, &yld->irq_dma);
+ GFP_ATOMIC, &yld->irq_dma);
if (yld->irq_data == NULL)
return usb_cleanup(yld, -ENOMEM);
yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
- SLAB_ATOMIC, &yld->ctl_dma);
+ GFP_ATOMIC, &yld->ctl_dma);
if (!yld->ctl_data)
return usb_cleanup(yld, -ENOMEM);
yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)),
- SLAB_ATOMIC, &yld->ctl_req_dma);
+ GFP_ATOMIC, &yld->ctl_req_dma);
if (yld->ctl_req == NULL)
return usb_cleanup(yld, -ENOMEM);