Update Chelsio gige net driver.
- Use extern prefix for functions required.
- Removed a lot of wrappers, including t1_read/write_reg_4.
- Removed various macros, using native kernel calls now.
- Enumerated various #defines.
- Removed a lot of shared code which is not currently used in "NIC only" mode.
- Removed dead code.
Documentation/networking/cxgb.txt:
- Updated release notes for version 2.1.1
drivers/net/chelsio/ch_ethtool.h
- removed file, no longer using ETHTOOL namespace.
drivers/net/chelsio/common.h
- moved code from osdep.h to common.h
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/cphy.h
- removed dead code.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/cxgb2.c
- use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h.
- removed unused code.
- use printk message for link info resembling drivers/net/mii.c.
- no longer using the MODULE_xxx namespace.
- no longer using "pci_" namespace.
- no longer using ETHTOOL namespace.
drivers/net/chelsio/cxgb2.h
- removed file, merged into common.h
drivers/net/chelsio/elmer0.h
- removed dead code.
- added various enums.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/espi.c
- removed various macros, using native kernel calls now.
- removed a lot of wrappers, including t1_read/write_reg_4.
drivers/net/chelsio/espi.h
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/gmac.h
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/mv88x201x.c
- changes to sync with Chelsio TOT.
drivers/net/chelsio/osdep.h
- removed file, consolidation. osdep was used to translate wrapper functions
since our code supports multiple OSs. removed wrappers.
drivers/net/chelsio/pm3393.c
- removed various macros, using native kernel calls now.
- removed a lot of wrappers, including t1_read/write_reg_4.
- removed unused code.
drivers/net/chelsio/regs.h
- added a few register entries for future and current feature support.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/sge.c
- rewrote large portion of scatter-gather engine to stabilize
performance.
- using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler
types.
drivers/net/chelsio/sge.h
- rewrote large portion of scatter-gather engine to stabilize
performance.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/subr.c
- merged tp.c into subr.c
- removed various macros, using native kernel calls now.
- removed a lot of wrappers, including t1_read/write_reg_4.
- removed unused code.
drivers/net/chelsio/suni1x10gexp_regs.h
- modified copyright and authorship of file.
- added comment to #endif indicating which symbol it closes.
drivers/net/chelsio/tp.c
- removed file, merged into subr.c.
drivers/net/chelsio/tp.h
- removed file.
include/linux/pci_ids.h
- patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from
our code.
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c
index 7ec2dc7..2306425 100644
--- a/drivers/net/chelsio/espi.c
+++ b/drivers/net/chelsio/espi.c
@@ -1,8 +1,8 @@
/*****************************************************************************
* *
* File: espi.c *
- * $Revision: 1.9 $ *
- * $Date: 2005/03/23 07:41:27 $ *
+ * $Revision: 1.14 $ *
+ * $Date: 2005/05/14 00:59:32 $ *
* Description: *
* Ethernet SPI functionality. *
* part of the Chelsio 10Gb Ethernet Driver. *
@@ -63,15 +63,16 @@
{
int busy, attempts = TRICN_CMD_ATTEMPTS;
- t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) |
- V_REGISTER_OFFSET(reg_offset) |
- V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
- V_BUNDLE_ADDR(bundle_addr) |
- V_SPI4_COMMAND(TRICN_CMD_WRITE));
- t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0);
+ writel(V_WRITE_DATA(wr_data) |
+ V_REGISTER_OFFSET(reg_offset) |
+ V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
+ V_BUNDLE_ADDR(bundle_addr) |
+ V_SPI4_COMMAND(TRICN_CMD_WRITE),
+ adapter->regs + A_ESPI_CMD_ADDR);
+ writel(0, adapter->regs + A_ESPI_GOSTAT);
do {
- busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
+ busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
} while (busy && --attempts);
if (busy)
@@ -99,12 +100,12 @@
/* 1 */
timeout=1000;
do {
- stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET);
+ stat = readl(adapter->regs + A_ESPI_RX_RESET);
is_ready = (stat & 0x4);
timeout--;
udelay(5);
} while (!is_ready || (timeout==0));
- t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2);
+ writel(0x2, adapter->regs + A_ESPI_RX_RESET);
if (timeout==0)
{
CH_ERR("ESPI : ERROR : Timeout tricn_init() \n");
@@ -127,14 +128,14 @@
for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
/* 3 */
- t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3);
+ writel(0x3, adapter->regs + A_ESPI_RX_RESET);
return 0;
}
void t1_espi_intr_enable(struct peespi *espi)
{
- u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE);
+ u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
/*
* Cannot enable ESPI interrupts on T1B because HW asserts the
@@ -144,28 +145,28 @@
* cannot be cleared (HW bug).
*/
enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK;
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable);
- t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI);
+ writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
}
void t1_espi_intr_clear(struct peespi *espi)
{
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff);
- t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI);
+ writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
+ writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
}
void t1_espi_intr_disable(struct peespi *espi)
{
- u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE);
+ u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0);
- t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI);
+ writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
}
int t1_espi_intr_handler(struct peespi *espi)
{
u32 cnt;
- u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS);
+ u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
if (status & F_DIP4ERR)
espi->intr_cnt.DIP4_err++;
@@ -184,7 +185,7 @@
* Must read the error count to clear the interrupt
* that it causes.
*/
- cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT);
+ cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
}
/*
@@ -193,68 +194,28 @@
*/
if (status && t1_is_T1B(espi->adapter))
status = 1;
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status);
+ writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
return 0;
}
+const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
+{
+ return &espi->intr_cnt;
+}
+
static void espi_setup_for_pm3393(adapter_t *adapter)
{
u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark);
- t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3);
- t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008);
- t1_write_reg_4(adapter, A_PORT_CONFIG,
- V_RX_NPORTS(1) | V_TX_NPORTS(1));
-}
-
-static void espi_setup_for_vsc7321(adapter_t *adapter)
-{
- u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
-
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark);
- t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3);
- t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008);
- t1_write_reg_4(adapter, A_PORT_CONFIG,
- V_RX_NPORTS(1) | V_TX_NPORTS(1));
-}
-
-/*
- * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
- */
-static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
-{
- t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1);
- if (nports == 4) {
- if (is_T2(adapter)) {
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
- 0xf00);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
- 0x3c0);
- } else {
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
- 0x7ff);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
- 0x1ff);
- }
- } else {
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK,
- 0x1fff);
- t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK,
- 0x7ff);
- }
- t1_write_reg_4(adapter, A_PORT_CONFIG,
- V_RX_NPORTS(nports) | V_TX_NPORTS(nports));
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3);
+ writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+ writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+ writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+ writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
+ writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
}
/* T2 Init part -- */
@@ -263,43 +224,42 @@
/* 3. Init TriCN Hard Macro */
int t1_espi_init(struct peespi *espi, int mac_type, int nports)
{
+ u32 cnt;
+
u32 status_enable_extra = 0;
adapter_t *adapter = espi->adapter;
- u32 cnt;
u32 status, burstval = 0x800100;
/* Disable ESPI training. MACs that can handle it enable it below. */
- t1_write_reg_4(adapter, A_ESPI_TRAIN, 0);
+ writel(0, adapter->regs + A_ESPI_TRAIN);
if (is_T2(adapter)) {
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
- V_OUT_OF_SYNC_COUNT(4) |
- V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1));
+ writel(V_OUT_OF_SYNC_COUNT(4) |
+ V_DIP2_PARITY_ERR_THRES(3) |
+ V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
if (nports == 4) {
/* T204: maxburst1 = 0x40, maxburst2 = 0x20 */
burstval = 0x200040;
}
}
- t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval);
+ writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
- if (mac_type == CHBT_MAC_PM3393)
+ switch (mac_type) {
+ case CHBT_MAC_PM3393:
espi_setup_for_pm3393(adapter);
- else if (mac_type == CHBT_MAC_VSC7321)
- espi_setup_for_vsc7321(adapter);
- else if (mac_type == CHBT_MAC_IXF1010) {
- status_enable_extra = F_INTEL1010MODE;
- espi_setup_for_ixf1010(adapter, nports);
- } else
+ break;
+ default:
return -1;
+ }
/*
* Make sure any pending interrupts from the SPI are
* Cleared before enabling the interrupt.
*/
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK);
- status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS);
+ writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+ status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
if (status & F_DIP2PARITYERR) {
- cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT);
+ cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
}
/*
@@ -308,10 +268,10 @@
*/
if (status && t1_is_T1B(espi->adapter))
status = 1;
- t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status);
+ writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
- t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE,
- status_enable_extra | F_RXSTATUSENABLE);
+ writel(status_enable_extra | F_RXSTATUSENABLE,
+ adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
if (is_T2(adapter)) {
tricn_init(adapter);
@@ -319,10 +279,10 @@
* Always position the control at the 1st port egress IN
* (sop,eop) counter to reduce PIOs for T/N210 workaround.
*/
- espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL)
+ espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL)
& ~MON_MASK) | (F_MONITORED_DIRECTION
| F_MONITORED_INTERFACE);
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_lock_init(&espi->lock);
}
@@ -354,15 +314,16 @@
spin_lock(&espi->lock);
espi->misc_ctrl = (val & ~MON_MASK) |
(espi->misc_ctrl & MON_MASK);
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_unlock(&espi->lock);
}
u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
{
- struct peespi *espi = adapter->espi;
u32 sel;
+ struct peespi *espi = adapter->espi;
+
if (!is_T2(adapter))
return 0;
sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
@@ -373,14 +334,13 @@
else
spin_lock(&espi->lock);
if ((sel != (espi->misc_ctrl & MON_MASK))) {
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
- ((espi->misc_ctrl & ~MON_MASK) | sel));
- sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3);
- t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL,
- espi->misc_ctrl);
+ writel(((espi->misc_ctrl & ~MON_MASK) | sel),
+ adapter->regs + A_ESPI_MISC_CONTROL);
+ sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
}
else
- sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3);
+ sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
spin_unlock(&espi->lock);
return sel;
}