Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide
Pull IDE updates from David Miller:
"Two small cleanups in the IDE layer"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
ide: don't call memcpy with the same source and destination
ide: use setup_timer
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index e4e9010..44d4b2b 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -301,3 +301,25 @@
Description:
This file contains the revision field of the PCI device.
The value comes from device config space. The file is read only.
+
+What: /sys/bus/pci/devices/.../sriov_drivers_autoprobe
+Date: April 2017
+Contact: Bodong Wang<bodong@mellanox.com>
+Description:
+ This file is associated with the PF of a device that
+ supports SR-IOV. It determines whether newly-enabled VFs
+ are immediately bound to a driver. It initially contains
+ 1, which means the kernel automatically binds VFs to a
+ compatible driver immediately after they are enabled. If
+ an application writes 0 to the file before enabling VFs,
+ the kernel will not bind VFs to a driver.
+
+ A typical use case is to write 0 to this file, then enable
+ VFs, then assign the newly-created VFs to virtual machines.
+ Note that changing this file does not affect already-
+ enabled VFs. In this scenario, the user must first disable
+ the VFs, write 0 to sriov_drivers_autoprobe, then re-enable
+ the VFs.
+
+ This is similar to /sys/bus/pci/drivers_autoprobe, but
+ affects only the VFs associated with a specific PF.
diff --git a/Documentation/ABI/testing/sysfs-class-switchtec b/Documentation/ABI/testing/sysfs-class-switchtec
new file mode 100644
index 0000000..48cb4c1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-switchtec
@@ -0,0 +1,96 @@
+switchtec - Microsemi Switchtec PCI Switch Management Endpoint
+
+For details on this subsystem look at Documentation/switchtec.txt.
+
+What: /sys/class/switchtec
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: The switchtec class subsystem folder.
+ Each registered switchtec driver is represented by a switchtecX
+ subfolder (X being an integer >= 0).
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/component_id
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Component identifier as stored in the hardware (eg. PM8543)
+ (read only)
+Values: arbitrary string.
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/component_revision
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Component revision stored in the hardware (read only)
+Values: integer.
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/component_vendor
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Component vendor as stored in the hardware (eg. MICROSEM)
+ (read only)
+Values: arbitrary string.
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/device_version
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Device version as stored in the hardware (read only)
+Values: integer.
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/fw_version
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Currently running firmware version (read only)
+Values: integer (in hexadecimal).
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/partition
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Partition number for this device in the switch (read only)
+Values: integer.
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/partition_count
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Total number of partitions in the switch (read only)
+Values: integer.
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/product_id
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Product identifier as stored in the hardware (eg. PSX 48XG3)
+ (read only)
+Values: arbitrary string.
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/product_revision
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Product revision stored in the hardware (eg. RevB)
+ (read only)
+Values: arbitrary string.
+
+
+What: /sys/class/switchtec/switchtec[0-9]+/product_vendor
+Date: 05-Jan-2017
+KernelVersion: v4.11
+Contact: Logan Gunthorpe <logang@deltatee.com>
+Description: Product vendor as stored in the hardware (eg. MICROSEM)
+ (read only)
+Values: arbitrary string.
diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
index 147231f..00c9a90 100644
--- a/Documentation/PCI/00-INDEX
+++ b/Documentation/PCI/00-INDEX
@@ -12,3 +12,13 @@
- info on the PCI subsystem for device driver authors
pcieaer-howto.txt
- the PCI Express Advanced Error Reporting Driver Guide HOWTO
+endpoint/pci-endpoint.txt
+ - guide to add endpoint controller driver and endpoint function driver.
+endpoint/pci-endpoint-cfs.txt
+ - guide to use configfs to configure the PCI endpoint function.
+endpoint/pci-test-function.txt
+ - specification of *PCI test* function device.
+endpoint/pci-test-howto.txt
+ - userguide for PCI endpoint test function.
+endpoint/function/binding/
+ - binding documentation for PCI endpoint function
diff --git a/Documentation/PCI/endpoint/function/binding/pci-test.txt b/Documentation/PCI/endpoint/function/binding/pci-test.txt
new file mode 100644
index 0000000..3b68b95
--- /dev/null
+++ b/Documentation/PCI/endpoint/function/binding/pci-test.txt
@@ -0,0 +1,17 @@
+PCI TEST ENDPOINT FUNCTION
+
+name: Should be "pci_epf_test" to bind to the pci_epf_test driver.
+
+Configurable Fields:
+vendorid : should be 0x104c
+deviceid : should be 0xb500 for DRA74x and 0xb501 for DRA72x
+revid : don't care
+progif_code : don't care
+subclass_code : don't care
+baseclass_code : should be 0xff
+cache_line_size : don't care
+subsys_vendor_id : don't care
+subsys_id : don't care
+interrupt_pin : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
+msi_interrupts : Should be 1 to 32 depending on the number of MSI interrupts
+ to test
diff --git a/Documentation/PCI/endpoint/pci-endpoint-cfs.txt b/Documentation/PCI/endpoint/pci-endpoint-cfs.txt
new file mode 100644
index 0000000..d740f29
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-endpoint-cfs.txt
@@ -0,0 +1,105 @@
+ CONFIGURING PCI ENDPOINT USING CONFIGFS
+ Kishon Vijay Abraham I <kishon@ti.com>
+
+The PCI Endpoint Core exposes configfs entry (pci_ep) to configure the
+PCI endpoint function and to bind the endpoint function
+with the endpoint controller. (For introducing other mechanisms to
+configure the PCI Endpoint Function refer to [1]).
+
+*) Mounting configfs
+
+The PCI Endpoint Core layer creates pci_ep directory in the mounted configfs
+directory. configfs can be mounted using the following command.
+
+ mount -t configfs none /sys/kernel/config
+
+*) Directory Structure
+
+The pci_ep configfs has two directories at its root: controllers and
+functions. Every EPC device present in the system will have an entry in
+the *controllers* directory and and every EPF driver present in the system
+will have an entry in the *functions* directory.
+
+/sys/kernel/config/pci_ep/
+ .. controllers/
+ .. functions/
+
+*) Creating EPF Device
+
+Every registered EPF driver will be listed in controllers directory. The
+entries corresponding to EPF driver will be created by the EPF core.
+
+/sys/kernel/config/pci_ep/functions/
+ .. <EPF Driver1>/
+ ... <EPF Device 11>/
+ ... <EPF Device 21>/
+ .. <EPF Driver2>/
+ ... <EPF Device 12>/
+ ... <EPF Device 22>/
+
+In order to create a <EPF device> of the type probed by <EPF Driver>, the
+user has to create a directory inside <EPF DriverN>.
+
+Every <EPF device> directory consists of the following entries that can be
+used to configure the standard configuration header of the endpoint function.
+(These entries are created by the framework when any new <EPF Device> is
+created)
+
+ .. <EPF Driver1>/
+ ... <EPF Device 11>/
+ ... vendorid
+ ... deviceid
+ ... revid
+ ... progif_code
+ ... subclass_code
+ ... baseclass_code
+ ... cache_line_size
+ ... subsys_vendor_id
+ ... subsys_id
+ ... interrupt_pin
+
+*) EPC Device
+
+Every registered EPC device will be listed in controllers directory. The
+entries corresponding to EPC device will be created by the EPC core.
+
+/sys/kernel/config/pci_ep/controllers/
+ .. <EPC Device1>/
+ ... <Symlink EPF Device11>/
+ ... <Symlink EPF Device12>/
+ ... start
+ .. <EPC Device2>/
+ ... <Symlink EPF Device21>/
+ ... <Symlink EPF Device22>/
+ ... start
+
+The <EPC Device> directory will have a list of symbolic links to
+<EPF Device>. These symbolic links should be created by the user to
+represent the functions present in the endpoint device.
+
+The <EPC Device> directory will also have a *start* field. Once
+"1" is written to this field, the endpoint device will be ready to
+establish the link with the host. This is usually done after
+all the EPF devices are created and linked with the EPC device.
+
+
+ | controllers/
+ | <Directory: EPC name>/
+ | <Symbolic Link: Function>
+ | start
+ | functions/
+ | <Directory: EPF driver>/
+ | <Directory: EPF device>/
+ | vendorid
+ | deviceid
+ | revid
+ | progif_code
+ | subclass_code
+ | baseclass_code
+ | cache_line_size
+ | subsys_vendor_id
+ | subsys_id
+ | interrupt_pin
+ | function
+
+[1] -> Documentation/PCI/endpoint/pci-endpoint.txt
diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.txt
new file mode 100644
index 0000000..9b1d668
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-endpoint.txt
@@ -0,0 +1,215 @@
+ PCI ENDPOINT FRAMEWORK
+ Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to use the PCI Endpoint Framework in order to create
+endpoint controller driver, endpoint function driver, and using configfs
+interface to bind the function driver to the controller driver.
+
+1. Introduction
+
+Linux has a comprehensive PCI subsystem to support PCI controllers that
+operates in Root Complex mode. The subsystem has capability to scan PCI bus,
+assign memory resources and IRQ resources, load PCI driver (based on
+vendor ID, device ID), support other services like hot-plug, power management,
+advanced error reporting and virtual channels.
+
+However the PCI controller IP integrated in some SoCs is capable of operating
+either in Root Complex mode or Endpoint mode. PCI Endpoint Framework will
+add endpoint mode support in Linux. This will help to run Linux in an
+EP system which can have a wide variety of use cases from testing or
+validation, co-processor accelerator, etc.
+
+2. PCI Endpoint Core
+
+The PCI Endpoint Core layer comprises 3 components: the Endpoint Controller
+library, the Endpoint Function library, and the configfs layer to bind the
+endpoint function with the endpoint controller.
+
+2.1 PCI Endpoint Controller(EPC) Library
+
+The EPC library provides APIs to be used by the controller that can operate
+in endpoint mode. It also provides APIs to be used by function driver/library
+in order to implement a particular endpoint function.
+
+2.1.1 APIs for the PCI controller Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI controller driver.
+
+*) devm_pci_epc_create()/pci_epc_create()
+
+ The PCI controller driver should implement the following ops:
+ * write_header: ops to populate configuration space header
+ * set_bar: ops to configure the BAR
+ * clear_bar: ops to reset the BAR
+ * alloc_addr_space: ops to allocate in PCI controller address space
+ * free_addr_space: ops to free the allocated address space
+ * raise_irq: ops to raise a legacy or MSI interrupt
+ * start: ops to start the PCI link
+ * stop: ops to stop the PCI link
+
+ The PCI controller driver can then create a new EPC device by invoking
+ devm_pci_epc_create()/pci_epc_create().
+
+*) devm_pci_epc_destroy()/pci_epc_destroy()
+
+ The PCI controller driver can destroy the EPC device created by either
+ devm_pci_epc_create() or pci_epc_create() using devm_pci_epc_destroy() or
+ pci_epc_destroy().
+
+*) pci_epc_linkup()
+
+ In order to notify all the function devices that the EPC device to which
+ they are linked has established a link with the host, the PCI controller
+ driver should invoke pci_epc_linkup().
+
+*) pci_epc_mem_init()
+
+ Initialize the pci_epc_mem structure used for allocating EPC addr space.
+
+*) pci_epc_mem_exit()
+
+ Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
+
+2.1.2 APIs for the PCI Endpoint Function Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint function driver.
+
+*) pci_epc_write_header()
+
+ The PCI endpoint function driver should use pci_epc_write_header() to
+ write the standard configuration header to the endpoint controller.
+
+*) pci_epc_set_bar()
+
+ The PCI endpoint function driver should use pci_epc_set_bar() to configure
+ the Base Address Register in order for the host to assign PCI addr space.
+ Register space of the function driver is usually configured
+ using this API.
+
+*) pci_epc_clear_bar()
+
+ The PCI endpoint function driver should use pci_epc_clear_bar() to reset
+ the BAR.
+
+*) pci_epc_raise_irq()
+
+ The PCI endpoint function driver should use pci_epc_raise_irq() to raise
+ Legacy Interrupt or MSI Interrupt.
+
+*) pci_epc_mem_alloc_addr()
+
+ The PCI endpoint function driver should use pci_epc_mem_alloc_addr(), to
+ allocate memory address from EPC addr space which is required to access
+ RC's buffer
+
+*) pci_epc_mem_free_addr()
+
+ The PCI endpoint function driver should use pci_epc_mem_free_addr() to
+ free the memory space allocated using pci_epc_mem_alloc_addr().
+
+2.1.3 Other APIs
+
+There are other APIs provided by the EPC library. These are used for binding
+the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
+using these APIs.
+
+*) pci_epc_get()
+
+ Get a reference to the PCI endpoint controller based on the device name of
+ the controller.
+
+*) pci_epc_put()
+
+ Release the reference to the PCI endpoint controller obtained using
+ pci_epc_get()
+
+*) pci_epc_add_epf()
+
+ Add a PCI endpoint function to a PCI endpoint controller. A PCIe device
+ can have up to 8 functions according to the specification.
+
+*) pci_epc_remove_epf()
+
+ Remove the PCI endpoint function from PCI endpoint controller.
+
+*) pci_epc_start()
+
+ The PCI endpoint function driver should invoke pci_epc_start() once it
+ has configured the endpoint function and wants to start the PCI link.
+
+*) pci_epc_stop()
+
+ The PCI endpoint function driver should invoke pci_epc_stop() to stop
+ the PCI LINK.
+
+2.2 PCI Endpoint Function(EPF) Library
+
+The EPF library provides APIs to be used by the function driver and the EPC
+library to provide endpoint mode functionality.
+
+2.2.1 APIs for the PCI Endpoint Function Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint function driver.
+
+*) pci_epf_register_driver()
+
+ The PCI Endpoint Function driver should implement the following ops:
+ * bind: ops to perform when a EPC device has been bound to EPF device
+ * unbind: ops to perform when a binding has been lost between a EPC
+ device and EPF device
+ * linkup: ops to perform when the EPC device has established a
+ connection with a host system
+
+ The PCI Function driver can then register the PCI EPF driver by using
+ pci_epf_register_driver().
+
+*) pci_epf_unregister_driver()
+
+ The PCI Function driver can unregister the PCI EPF driver by using
+ pci_epf_unregister_driver().
+
+*) pci_epf_alloc_space()
+
+ The PCI Function driver can allocate space for a particular BAR using
+ pci_epf_alloc_space().
+
+*) pci_epf_free_space()
+
+ The PCI Function driver can free the allocated space
+ (using pci_epf_alloc_space) by invoking pci_epf_free_space().
+
+2.2.2 APIs for the PCI Endpoint Controller Library
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint controller library.
+
+*) pci_epf_linkup()
+
+ The PCI endpoint controller library invokes pci_epf_linkup() when the
+ EPC device has established the connection to the host.
+
+2.2.2 Other APIs
+There are other APIs provided by the EPF library. These are used to notify
+the function driver when the EPF device is bound to the EPC device.
+pci-ep-cfs.c can be used as reference for using these APIs.
+
+*) pci_epf_create()
+
+ Create a new PCI EPF device by passing the name of the PCI EPF device.
+ This name will be used to bind the the EPF device to a EPF driver.
+
+*) pci_epf_destroy()
+
+ Destroy the created PCI EPF device.
+
+*) pci_epf_bind()
+
+ pci_epf_bind() should be invoked when the EPF device has been bound to
+ a EPC device.
+
+*) pci_epf_unbind()
+
+ pci_epf_unbind() should be invoked when the binding between EPC device
+ and EPF device is lost.
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.txt
new file mode 100644
index 0000000..0c519c9
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-test-function.txt
@@ -0,0 +1,66 @@
+ PCI TEST
+ Kishon Vijay Abraham I <kishon@ti.com>
+
+Traditionally PCI RC has always been validated by using standard
+PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
+However with the addition of EP-core in linux kernel, it is possible
+to configure a PCI controller that can operate in EP mode to work as
+a test device.
+
+The PCI endpoint test device is a virtual device (defined in software)
+used to test the endpoint functionality and serve as a sample driver
+for other PCI endpoint devices (to use the EP framework).
+
+The PCI endpoint test device has the following registers:
+
+ 1) PCI_ENDPOINT_TEST_MAGIC
+ 2) PCI_ENDPOINT_TEST_COMMAND
+ 3) PCI_ENDPOINT_TEST_STATUS
+ 4) PCI_ENDPOINT_TEST_SRC_ADDR
+ 5) PCI_ENDPOINT_TEST_DST_ADDR
+ 6) PCI_ENDPOINT_TEST_SIZE
+ 7) PCI_ENDPOINT_TEST_CHECKSUM
+
+*) PCI_ENDPOINT_TEST_MAGIC
+
+This register will be used to test BAR0. A known pattern will be written
+and read back from MAGIC register to verify BAR0.
+
+*) PCI_ENDPOINT_TEST_COMMAND:
+
+This register will be used by the host driver to indicate the function
+that the endpoint device must perform.
+
+Bitfield Description:
+ Bit 0 : raise legacy IRQ
+ Bit 1 : raise MSI IRQ
+ Bit 2 - 7 : MSI interrupt number
+ Bit 8 : read command (read data from RC buffer)
+ Bit 9 : write command (write data to RC buffer)
+ Bit 10 : copy command (copy data from one RC buffer to another
+ RC buffer)
+
+*) PCI_ENDPOINT_TEST_STATUS
+
+This register reflects the status of the PCI endpoint device.
+
+Bitfield Description:
+ Bit 0 : read success
+ Bit 1 : read fail
+ Bit 2 : write success
+ Bit 3 : write fail
+ Bit 4 : copy success
+ Bit 5 : copy fail
+ Bit 6 : IRQ raised
+ Bit 7 : source address is invalid
+ Bit 8 : destination address is invalid
+
+*) PCI_ENDPOINT_TEST_SRC_ADDR
+
+This register contains the source address (RC buffer address) for the
+COPY/READ command.
+
+*) PCI_ENDPOINT_TEST_DST_ADDR
+
+This register contains the destination address (RC buffer address) for
+the COPY/WRITE command.
diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt
new file mode 100644
index 0000000..75f48c3
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-test-howto.txt
@@ -0,0 +1,179 @@
+ PCI TEST USERGUIDE
+ Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to help users use pci-epf-test function driver
+and pci_endpoint_test host driver for testing PCI. The list of steps to
+be followed in the host side and EP side is given below.
+
+1. Endpoint Device
+
+1.1 Endpoint Controller Devices
+
+To find the list of endpoint controller devices in the system:
+
+ # ls /sys/class/pci_epc/
+ 51000000.pcie_ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+ # ls /sys/kernel/config/pci_ep/controllers
+ 51000000.pcie_ep
+
+1.2 Endpoint Function Drivers
+
+To find the list of endpoint function drivers in the system:
+
+ # ls /sys/bus/pci-epf/drivers
+ pci_epf_test
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+ # ls /sys/kernel/config/pci_ep/functions
+ pci_epf_test
+
+1.3 Creating pci-epf-test Device
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-test device, the following commands can be used
+
+ # mount -t configfs none /sys/kernel/config
+ # cd /sys/kernel/config/pci_ep/
+ # mkdir functions/pci_epf_test/func1
+
+The "mkdir func1" above creates the pci-epf-test function device that will
+be probed by pci_epf_test driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields.
+
+ # ls functions/pci_epf_test/func1
+ baseclass_code interrupt_pin revid subsys_vendor_id
+ cache_line_size msi_interrupts subclass_code vendorid
+ deviceid progif_code subsys_id
+
+The PCI endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-test driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001
+
+ # cat functions/pci_epf_test/func1/vendorid
+ 0xffff
+ # cat functions/pci_epf_test/func1/interrupt_pin
+ 0x0001
+
+1.4 Configuring pci-epf-test Device
+
+The user can configure the pci-epf-test device using configfs entry. In order
+to change the vendorid and the number of MSI interrupts used by the function
+device, the following commands can be used.
+
+ # echo 0x104c > functions/pci_epf_test/func1/vendorid
+ # echo 0xb500 > functions/pci_epf_test/func1/deviceid
+ # echo 16 > functions/pci_epf_test/func1/msi_interrupts
+
+1.5 Binding pci-epf-test Device to EP Controller
+
+In order for the endpoint function device to be useful, it has to be bound to
+a PCI endpoint controller driver. Use the configfs to bind the function
+device to one of the controller driver present in the system.
+
+ # ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/
+
+Once the above step is completed, the PCI endpoint is ready to establish a link
+with the host.
+
+1.6 Start the Link
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'.
+
+ # echo 1 > controllers/51000000.pcie_ep/start
+
+2. RootComplex Device
+
+2.1 lspci Output
+
+Note that the devices listed here correspond to the value populated in 1.4 above
+
+ 00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01)
+ 01:00.0 Unassigned class [ff00]: Texas Instruments Device b500
+
+2.2 Using Endpoint Test function Device
+
+pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
+tests. Before pcitest.sh can be used pcitest.c should be compiled using the
+following commands.
+
+ cd <kernel-dir>
+ make headers_install ARCH=arm
+ arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest
+ cp pcitest <rootfs>/usr/sbin/
+ cp tools/pci/pcitest.sh <rootfs>
+
+2.2.1 pcitest.sh Output
+ # ./pcitest.sh
+ BAR tests
+
+ BAR0: OKAY
+ BAR1: OKAY
+ BAR2: OKAY
+ BAR3: OKAY
+ BAR4: NOT OKAY
+ BAR5: NOT OKAY
+
+ Interrupt tests
+
+ LEGACY IRQ: NOT OKAY
+ MSI1: OKAY
+ MSI2: OKAY
+ MSI3: OKAY
+ MSI4: OKAY
+ MSI5: OKAY
+ MSI6: OKAY
+ MSI7: OKAY
+ MSI8: OKAY
+ MSI9: OKAY
+ MSI10: OKAY
+ MSI11: OKAY
+ MSI12: OKAY
+ MSI13: OKAY
+ MSI14: OKAY
+ MSI15: OKAY
+ MSI16: OKAY
+ MSI17: NOT OKAY
+ MSI18: NOT OKAY
+ MSI19: NOT OKAY
+ MSI20: NOT OKAY
+ MSI21: NOT OKAY
+ MSI22: NOT OKAY
+ MSI23: NOT OKAY
+ MSI24: NOT OKAY
+ MSI25: NOT OKAY
+ MSI26: NOT OKAY
+ MSI27: NOT OKAY
+ MSI28: NOT OKAY
+ MSI29: NOT OKAY
+ MSI30: NOT OKAY
+ MSI31: NOT OKAY
+ MSI32: NOT OKAY
+
+ Read Tests
+
+ READ ( 1 bytes): OKAY
+ READ ( 1024 bytes): OKAY
+ READ ( 1025 bytes): OKAY
+ READ (1024000 bytes): OKAY
+ READ (1024001 bytes): OKAY
+
+ Write Tests
+
+ WRITE ( 1 bytes): OKAY
+ WRITE ( 1024 bytes): OKAY
+ WRITE ( 1025 bytes): OKAY
+ WRITE (1024000 bytes): OKAY
+ WRITE (1024001 bytes): OKAY
+
+ Copy Tests
+
+ COPY ( 1 bytes): OKAY
+ COPY ( 1024 bytes): OKAY
+ COPY ( 1025 bytes): OKAY
+ COPY (1024000 bytes): OKAY
+ COPY (1024001 bytes): OKAY
diff --git a/Documentation/PCI/pci-iov-howto.txt b/Documentation/PCI/pci-iov-howto.txt
index 2d91ae2..d2a8415 100644
--- a/Documentation/PCI/pci-iov-howto.txt
+++ b/Documentation/PCI/pci-iov-howto.txt
@@ -68,6 +68,18 @@
echo 0 > \
/sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_numvfs
+To enable auto probing VFs by a compatible driver on the host, run
+command below before enabling SR-IOV capabilities. This is the
+default behavior.
+ echo 1 > \
+ /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe
+
+To disable auto probing VFs by a compatible driver on the host, run
+command below before enabling SR-IOV capabilities. Updating this
+entry will not affect VFs which are already probed.
+ echo 0 > \
+ /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe
+
3.2 Usage example
Following piece of code illustrates the usage of the SR-IOV API.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index e4c9e0e..130e7ec 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1578,6 +1578,15 @@
extended tables themselves, and also PASID support. With
this option set, extended tables will not be used even
on hardware which claims to support them.
+ tboot_noforce [Default Off]
+ Do not force the Intel IOMMU enabled under tboot.
+ By default, tboot will force Intel IOMMU on, which
+ could harm performance of some high-throughput
+ devices like 40GBit network cards, even if identity
+ mapping is enabled.
+ Note that using this option lowers the security
+ provided by tboot because it makes the system
+ vulnerable to DMA attacks.
intel_idle.max_cstate= [KNL,HW,ACPI,X86]
0 disables intel_idle and fall back on acpi_idle.
@@ -1644,6 +1653,12 @@
nobypass [PPC/POWERNV]
Disable IOMMU bypass, using IOMMU for PCI devices.
+ iommu.passthrough=
+ [ARM64] Configure DMA to bypass the IOMMU by default.
+ Format: { "0" | "1" }
+ 0 - Use IOMMU translation for DMA.
+ 1 - Bypass the IOMMU for DMA.
+ unset - Use IOMMU translation for DMA.
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
diff --git a/Documentation/arm/stm32/stm32h743-overview.txt b/Documentation/arm/stm32/stm32h743-overview.txt
new file mode 100644
index 0000000..3031cba
--- /dev/null
+++ b/Documentation/arm/stm32/stm32h743-overview.txt
@@ -0,0 +1,30 @@
+ STM32H743 Overview
+ ==================
+
+ Introduction
+ ------------
+ The STM32H743 is a Cortex-M7 MCU aimed at various applications.
+ It features:
+ - Cortex-M7 core running up to @400MHz
+ - 2MB internal flash, 1MBytes internal RAM
+ - FMC controller to connect SDRAM, NOR and NAND memories
+ - Dual mode QSPI
+ - SD/MMC/SDIO support
+ - Ethernet controller
+ - USB OTFG FS & HS controllers
+ - I2C, SPI, CAN busses support
+ - Several 16 & 32 bits general purpose timers
+ - Serial Audio interface
+ - LCD controller
+ - HDMI-CEC
+ - SPDIFRX
+ - DFSDM
+
+ Resources
+ ---------
+ Datasheet and reference manual are publicly available on ST website:
+ - http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
+
+ Document Author
+ ---------------
+ Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index c246cd2..bfd5b55 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -43,8 +43,11 @@
- "wetek,hub" (Meson gxbb)
- "wetek,play2" (Meson gxbb)
- "amlogic,p212" (Meson gxl s905x)
+ - "khadas,vim" (Meson gxl s905x)
+
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
+ - "hwacom,amazetv" (Meson gxl s905x)
- "amlogic,q200" (Meson gxm s912)
- "amlogic,q201" (Meson gxm s912)
- "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 29737b9..799af90 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -217,7 +217,8 @@
elsewhere.
required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon".
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+ "atmel,<chip>-sfrbu", "syscon"
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
- reg: Should contain registers location and length
diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder2.txt b/Documentation/devicetree/bindings/arm/cavium-thunder2.txt
new file mode 100644
index 0000000..dc5dd65
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cavium-thunder2.txt
@@ -0,0 +1,8 @@
+Cavium ThunderX2 CN99XX platform tree bindings
+----------------------------------------------
+
+Boards with Cavium ThunderX2 CN99XX SoC shall have the root property:
+ compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
+
+These SoC uses the "cavium,thunder2" core which will be compatible
+with "brcm,vulcan".
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 698ad1f0..1030f5f 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -170,6 +170,7 @@
"brcm,brahma-b15"
"brcm,vulcan"
"cavium,thunder"
+ "cavium,thunder2"
"faraday,fa526"
"intel,sa110"
"intel,sa1100"
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index c9c567a..cdb9dd7 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -179,6 +179,18 @@
Required root node properties:
- compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
+LS1088A SoC
+Required root node properties:
+ - compatible = "fsl,ls1088a";
+
+LS1088A ARMv8 based QDS Board
+Required root node properties:
+ - compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+
+LS1088A ARMv8 based RDB Board
+Required root node properties:
+ - compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+
LS2080A SoC
Required root node properties:
- compatible = "fsl,ls2080a";
@@ -195,3 +207,14 @@
Required root node properties:
- compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+LS2088A SoC
+Required root node properties:
+ - compatible = "fsl,ls2088a";
+
+LS2088A ARMv8 based QDS Board
+Required root node properties:
+ - compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
+
+LS2088A ARMv8 based RDB Board
+Required root node properties:
+ - compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
diff --git a/Documentation/devicetree/bindings/arm/gemini.txt b/Documentation/devicetree/bindings/arm/gemini.txt
new file mode 100644
index 0000000..0041eb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gemini.txt
@@ -0,0 +1,86 @@
+Cortina systems Gemini platforms
+
+The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally
+produced by Storlink Semiconductor around 2005. The company was renamed
+later renamed Storm Semiconductor. The chip product name is Storlink SL3516.
+It was derived from earlier products from Storm named SL3316 (Centroid) and
+SL3512 (Bulverde).
+
+Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was
+produced and used for NAS and similar usecases. In 2014 Cortina Systems was
+in turn acquired by Inphi, who seem to have discontinued this product family.
+
+Many of the IP blocks used in the SoC comes from Faraday Technology.
+
+Required properties (in root node):
+ compatible = "cortina,gemini";
+
+Required nodes:
+
+- soc: the SoC should be represented by a simple bus encompassing all the
+ onchip devices, this is referred to as the soc bus node.
+
+- syscon: the soc bus node must have a system controller node pointing to the
+ global control registers, with the compatible string
+ "cortina,gemini-syscon", "syscon";
+
+- timer: the soc bus node must have a timer node pointing to the SoC timer
+ block, with the compatible string "cortina,gemini-timer"
+ See: clocksource/cortina,gemini-timer.txt
+
+- interrupt-controller: the sob bus node must have an interrupt controller
+ node pointing to the SoC interrupt controller block, with the compatible
+ string "cortina,gemini-interrupt-controller"
+ See interrupt-controller/cortina,gemini-interrupt-controller.txt
+
+Example:
+
+/ {
+ model = "Foo Gemini Machine";
+ compatible = "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+ interrupt-parent = <&intcon>;
+
+ syscon: syscon@40000000 {
+ compatible = "cortina,gemini-syscon", "syscon";
+ reg = <0x40000000 0x1000>;
+ };
+
+ uart0: serial@42000000 {
+ compatible = "ns16550a";
+ reg = <0x42000000 0x100>;
+ clock-frequency = <48000000>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ };
+
+ timer@43000000 {
+ compatible = "cortina,gemini-timer";
+ reg = <0x43000000 0x1000>;
+ interrupt-parent = <&intcon>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+ <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+ <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+ syscon = <&syscon>;
+ };
+
+ intcon: interrupt-controller@48000000 {
+ compatible = "cortina,gemini-interrupt-controller";
+ reg = <0x48000000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index f1c1e21..2e73215 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -4,6 +4,14 @@
Required root node properties:
- compatible = "hisilicon,hi3660";
+Hi3798cv200 SoC
+Required root node properties:
+ - compatible = "hisilicon,hi3798cv200";
+
+Hi3798cv200 Poplar Board
+Required root node properties:
+ - compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
+
Hi4511 Board
Required root node properties:
- compatible = "hisilicon,hi3620-hi4511";
diff --git a/Documentation/devicetree/bindings/arm/i2se.txt b/Documentation/devicetree/bindings/arm/i2se.txt
new file mode 100644
index 0000000..dbd54a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/i2se.txt
@@ -0,0 +1,22 @@
+I2SE Device Tree Bindings
+-------------------------
+
+Duckbill Board
+Required root node properties:
+ - compatible = "i2se,duckbill", "fsl,imx28";
+
+Duckbill 2 Board
+Required root node properties:
+ - compatible = "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 485 Board
+Required root node properties:
+ - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 EnOcean Board
+Required root node properties:
+ - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 SPI Board
+Required root node properties:
+ - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index cc4ace639..c965d99e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,5 +1,8 @@
Rockchip platforms device tree bindings
---------------------------------------
+- Asus Tinker board
+ Required root node properties:
+ - compatible = "asus,rk3288-tinker", "rockchip,rk3288";
- Kylin RK3036 board:
Required root node properties:
@@ -56,6 +59,17 @@
- compatible = "google,veyron-brain-rev0", "google,veyron-brain",
"google,veyron", "rockchip,rk3288";
+- Google Gru (dev-board):
+ Required root node properties:
+ - compatible = "google,gru-rev15", "google,gru-rev14",
+ "google,gru-rev13", "google,gru-rev12",
+ "google,gru-rev11", "google,gru-rev10",
+ "google,gru-rev9", "google,gru-rev8",
+ "google,gru-rev7", "google,gru-rev6",
+ "google,gru-rev5", "google,gru-rev4",
+ "google,gru-rev3", "google,gru-rev2",
+ "google,gru", "rockchip,rk3399";
+
- Google Jaq (Haier Chromebook 11 and more):
Required root node properties:
- compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
@@ -70,6 +84,15 @@
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
+- Google Kevin (Samsung Chromebook Plus):
+ Required root node properties:
+ - compatible = "google,kevin-rev15", "google,kevin-rev14",
+ "google,kevin-rev13", "google,kevin-rev12",
+ "google,kevin-rev11", "google,kevin-rev10",
+ "google,kevin-rev9", "google,kevin-rev8",
+ "google,kevin-rev7", "google,kevin-rev6",
+ "google,kevin", "google,gru", "rockchip,rk3399";
+
- Google Mickey (Asus Chromebit CS10):
Required root node properties:
- compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
@@ -103,6 +126,10 @@
Required root node properties:
- compatible = "mqmaker,miqi", "rockchip,rk3288";
+- Phytec phyCORE-RK3288: Rapid Development Kit
+ Required root node properties:
+ - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
- Rockchip PX3 Evaluation board:
Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
@@ -134,6 +161,10 @@
Required root node properties:
- compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
+- Rockchip RK3328 evb:
+ Required root node properties:
+ - compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
+
- Rockchip RK3399 evb:
Required root node properties:
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index c950263..170fe05 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -13,8 +13,12 @@
compatible = "renesas,r8a73a4"
- R-Mobile A1 (R8A77400)
compatible = "renesas,r8a7740"
+ - RZ/G1H (R8A77420)
+ compatible = "renesas,r8a7742"
- RZ/G1M (R8A77430)
compatible = "renesas,r8a7743"
+ - RZ/G1N (R8A77440)
+ compatible = "renesas,r8a7744"
- RZ/G1E (R8A77450)
compatible = "renesas,r8a7745"
- R-Car M1A (R8A77781)
diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
index 31a629d..3df034b 100644
--- a/Documentation/devicetree/bindings/arm/sprd.txt
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -1,11 +1,14 @@
Spreadtrum SoC Platforms Device Tree Bindings
----------------------------------------------------
-Sharkl64 is a Spreadtrum's SoC Platform which is based
-on ARM 64-bit processor.
-
-SC9836 openphone board with SC9836 SoC based on the
-Sharkl64 Platform shall have the following properties.
-
+SC9836 openphone Board
Required root node properties:
- - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
+ - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
+
+SC9860 SoC
+Required root node properties:
+ - compatible = "sprd,sc9860"
+
+SP9860G 3GFHD Board
+Required root node properties:
+ - compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
new file mode 100644
index 0000000..078a58b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
@@ -0,0 +1,34 @@
+NVIDIA Tegra Power Management Controller (PMC)
+
+Required properties:
+- compatible: Should contain one of the following:
+ - "nvidia,tegra186-pmc": for Tegra186
+- reg: Must contain an (offset, length) pair of the register set for each
+ entry in reg-names.
+- reg-names: Must include the following entries:
+ - "pmc"
+ - "wake"
+ - "aotag"
+ - "scratch"
+
+Optional properties:
+- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
+
+Example:
+
+SoC DTSI:
+
+ pmc@c3600000 {
+ compatible = "nvidia,tegra186-pmc";
+ reg = <0 0x0c360000 0 0x10000>,
+ <0 0x0c370000 0 0x10000>,
+ <0 0x0c380000 0 0x10000>,
+ <0 0x0c390000 0 0x10000>;
+ reg-names = "pmc", "wake", "aotag", "scratch";
+ };
+
+Board DTS:
+
+ pmc@c360000 {
+ nvidia,invert-interrupt;
+ };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
index ccf0addd..a855c1b 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
@@ -1,7 +1,13 @@
NVIDIA Tegra Flow Controller
Required properties:
-- compatible: Should be "nvidia,tegra<chip>-flowctrl"
+- compatible: Should contain one of the following:
+ - "nvidia,tegra20-flowctrl": for Tegra20
+ - "nvidia,tegra30-flowctrl": for Tegra30
+ - "nvidia,tegra114-flowctrl": for Tegra114
+ - "nvidia,tegra124-flowctrl": for Tegra124
+ - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132
+ - "nvidia,tegra210-flowctrl": for Tegra210
- reg: Should contain one register range (address and length)
Example:
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index ce06435..a09d627 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -5,7 +5,8 @@
Required Properties:
-- compatible: should be "amlogic,gxbb-clkc"
+- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
+ or "amlogic,gxl-clkc" for GXL and GXM SoC.
- reg: physical base address of the clock controller and length of memory
mapped region.
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
index eb985a6..796c260 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -31,6 +31,12 @@
4 = dclk (SDRAM Interface Clock)
5 = refclk (Reference Clock)
+The following is a list of provided IDs and clock names on 98dx3236:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = ddrclk (DDR clock)
+ 3 = mpll (MPLL Clock)
+
The following is a list of provided IDs and clock names on Kirkwood and Dove:
0 = tclk (Internal Bus clock)
1 = cpuclk (CPU0 clock)
@@ -49,6 +55,7 @@
"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
"marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+ "marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
"marvell,dove-core-clock" - for Dove SoC core clocks
"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 5142efc..de562da2 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -119,6 +119,16 @@
29 sata1lnk
30 sata1 SATA Host 1
+The following is a list of provided IDs for 98dx3236:
+ID Clock Peripheral
+-----------------------------------
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex0 PCIe Cntrl 0
+17 sdio SDHCI Host
+18 usb0 USB Host 0
+22 xor0 XOR DMA 0
+
The following is a list of provided IDs for Dove:
ID Clock Peripheral
-----------------------------------
@@ -169,6 +179,7 @@
"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
"marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
+ "marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
"marvell,dove-gating-clock" - for Dove SoC clock gating
"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
- reg : shall be the register address of the Clock Gating Control register
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index aa3526f..6ed469c 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -35,6 +35,7 @@
* "fsl,ls1021a-clockgen"
* "fsl,ls1043a-clockgen"
* "fsl,ls1046a-clockgen"
+ * "fsl,ls1088a-clockgen"
* "fsl,ls2080a-clockgen"
Chassis-version clock strings include:
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
index d085ef9..f8e9464 100644
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -202,23 +202,23 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
opp-microvolt = <800000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <800000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <800000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <825000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <875000>;
};
@@ -292,23 +292,23 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
opp-microvolt = <900000>;
};
- opp@80000000 {
+ opp-80000000 {
opp-hz = /bits/ 64 <80000000>;
opp-microvolt = <900000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <1000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <1000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <1000000>;
};
@@ -318,19 +318,19 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
};
- opp@80000000 {
+ opp-80000000 {
opp-hz = /bits/ 64 <80000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
};
@@ -339,19 +339,19 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
};
- opp@80000000 {
+ opp-80000000 {
opp-hz = /bits/ 64 <80000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
- opp@300000000 {
+ opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
};
};
@@ -360,13 +360,13 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
};
- opp@80000000 {
+ opp-80000000 {
opp-hz = /bits/ 64 <80000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b82c004..57a8d06 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -94,6 +94,7 @@
* allwinner,sun6i-a31-display-backend
* allwinner,sun8i-a33-display-backend
- reg: base address and size of the memory-mapped region.
+ - interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the frontend and backend
* ahb: the backend interface clock
* mod: the backend module clock
@@ -265,6 +266,7 @@
be0: display-backend@1e60000 {
compatible = "allwinner,sun5i-a13-display-backend";
reg = <0x01e60000 0x10000>;
+ interrupts = <47>;
clocks = <&ahb_gates 44>, <&de_be_clk>,
<&dram_gates 26>;
clock-names = "ahb", "mod",
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 476f5ea..2b6243e 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -35,6 +35,14 @@
- interrupt-names and interrupts:
* pmu: Power Management Unit interrupt, if implemented in hardware
+ - memory-region:
+ Memory region to allocate from, as defined in
+ Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
+
+ - operating-points-v2:
+ Operating Points for the GPU, as defined in
+ Documentation/devicetree/bindings/opp/opp.txt
+
Vendor-specific bindings
------------------------
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
index ff3db65..b7e4c744 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -5,6 +5,7 @@
Currently recognized values:
- nvidia,gk20a
- nvidia,gm20b
+ - nvidia,gp10b
- reg: Physical base address and length of the controller's registers.
Must contain two entries:
- first entry for bar0
@@ -14,7 +15,8 @@
- interrupt-names: Must include the following entries:
- stall
- nonstall
-- vdd-supply: regulator for supply voltage.
+- vdd-supply: regulator for supply voltage. Only required for GPUs not using
+ power domains.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
@@ -27,6 +29,8 @@
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- gpu
+- power-domains: GPUs that make use of power domains can define this property
+ instead of vdd-supply. Currently "nvidia,gp10b" makes use of this.
Optional properties:
- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
@@ -68,3 +72,22 @@
iommus = <&mc TEGRA_SWGROUP_GPU>;
status = "disabled";
};
+
+Example for GP10B:
+
+ gpu@17000000 {
+ compatible = "nvidia,gp10b";
+ reg = <0x0 0x17000000 0x0 0x1000000>,
+ <0x0 0x18000000 0x0 0x1000000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "stall", "nonstall";
+ clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+ <&bpmp TEGRA186_CLK_GPU>;
+ clock-names = "gpu", "pwr";
+ resets = <&bpmp TEGRA186_RESET_GPU>;
+ reset-names = "gpu";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+ iommus = <&smmu TEGRA186_SID_GPU>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
index 6cdf32d..8a6ffce 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -60,6 +60,17 @@
aliases of secure registers have to be used during
SMMU configuration.
+- stream-match-mask : For SMMUs supporting stream matching and using
+ #iommu-cells = <1>, specifies a mask of bits to ignore
+ when matching stream IDs (e.g. this may be programmed
+ into the SMRn.MASK field of every stream match register
+ used). For cases where it is desirable to ignore some
+ portion of every Stream ID (e.g. for certain MMU-500
+ configurations given globally unique input IDs). This
+ property is not valid for SMMUs using stream indexing,
+ or using stream matching with #iommu-cells = <2>, and
+ may be ignored if present in such cases.
+
** Deprecated properties:
- mmu-masters (deprecated in favour of the generic "iommus" binding) :
@@ -109,3 +120,20 @@
master3 {
iommus = <&smmu2 1 0x30>;
};
+
+
+ /* ARM MMU-500 with 10-bit stream ID input configuration */
+ smmu3: iommu {
+ compatible = "arm,mmu-500", "arm,smmu-v2";
+ ...
+ #iommu-cells = <1>;
+ /* always ignore appended 5-bit TBU number */
+ stream-match-mask = 0x7c00;
+ };
+
+ bus {
+ /* bus whose child devices emit one unique 10-bit stream
+ ID each, but may master through multiple SMMU TBUs */
+ iommu-map = <0 &smmu3 0 0x400>;
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
index 3e920ec..9ce35af 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
@@ -40,6 +40,7 @@
w25x80
w25x32
w25q32
+ w25q64
w25q32dw
w25q80bl
w25q128
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 5fbab29..c329608 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -32,19 +32,16 @@
-------------------
Required properties:
-- compatible: must be "marvell,dfx-server"
+- compatible: must be "marvell,dfx-server", "simple-bus"
+- ranges: describes the address mapping of a memory-mapped bus.
- reg: address and length of the register set for the device.
Example:
-dfx-registers {
- compatible = "simple-bus";
+dfx-server {
+ compatible = "marvell,dfx-server", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-
- dfx: dfx@0 {
- compatible = "marvell,dfx-server";
- reg = <0 0x100000>;
- };
+ reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
};
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 1392c70..b2480dd 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -6,30 +6,40 @@
- reg-names: Must be "config" for the PCIe configuration space.
(The old way of getting the configuration address space from "ranges"
is deprecated and should be avoided.)
+- num-lanes: number of lanes to use
+RC mode:
- #address-cells: set to <3>
- #size-cells: set to <2>
- device_type: set to "pci"
- ranges: ranges for the PCI memory and I/O regions
- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI properties
- to define the mapping of the PCIe interface to interrupt
+- interrupt-map-mask and interrupt-map: standard PCI
+ properties to define the mapping of the PCIe interface to interrupt
numbers.
-- num-lanes: number of lanes to use
+EP mode:
+- num-ib-windows: number of inbound address translation
+ windows
+- num-ob-windows: number of outbound address translation
+ windows
Optional properties:
-- num-viewport: number of view ports configured in hardware. If a platform
- does not specify it, the driver assumes 2.
- num-lanes: number of lanes to use (this property should be specified unless
the link is brought already up in BIOS)
- reset-gpio: gpio pin number of power good signal
-- bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
- specify this property, to keep backwards compatibility a range of 0x00-0xff
- is assumed if not present)
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- "pcie"
- "pcie_bus"
+RC mode:
+- num-viewport: number of view ports configured in
+ hardware. If a platform does not specify it, the driver assumes 2.
+- bus-range: PCI bus numbers covered (it is recommended
+ for new devicetrees to specify this property, to keep backwards
+ compatibility a range of 0x00-0xff is assumed if not present)
+EP mode:
+- max-functions: maximum number of functions that can be
+ configured
Example configuration:
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
new file mode 100644
index 0000000..35d4a97
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
@@ -0,0 +1,129 @@
+Faraday Technology FTPCI100 PCI Host Bridge
+
+This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
+is a generic IP block from Faraday Technology. It exists in two variants:
+plain and dual PCI. The plain version embeds a cascading interrupt controller
+into the host bridge. The dual version routes the interrupts to the host
+chips interrupt controller.
+
+The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
+Technology) and product ID 0x4321.
+
+Mandatory properties:
+
+- compatible: ranging from specific to generic, should be one of
+ "cortina,gemini-pci", "faraday,ftpci100"
+ "cortina,gemini-pci-dual", "faraday,ftpci100-dual"
+ "faraday,ftpci100"
+ "faraday,ftpci100-dual"
+- reg: memory base and size for the host bridge
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- #interrupt-cells: set to <1>
+- bus-range: set to <0x00 0xff>
+- device_type, set to "pci"
+- ranges: see pci.txt
+- interrupt-map-mask: see pci.txt
+- interrupt-map: see pci.txt
+- dma-ranges: three ranges for the inbound memory region. The ranges must
+ be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
+ 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
+ pre-fetchable.
+
+Mandatory subnodes:
+- For "faraday,ftpci100" a node representing the interrupt-controller inside the
+ host bridge is mandatory. It has the following mandatory properties:
+ - interrupt: see interrupt-controller/interrupts.txt
+ - interrupt-parent: see interrupt-controller/interrupts.txt
+ - interrupt-controller: see interrupt-controller/interrupts.txt
+ - #address-cells: set to <0>
+ - #interrupt-cells: set to <1>
+
+I/O space considerations:
+
+The plain variant has 128MiB of non-prefetchable memory space, whereas the
+"dual" variant has 64MiB. Take this into account when describing the ranges.
+
+Interrupt map considerations:
+
+The "dual" variant will get INT A, B, C, D from the system interrupt controller
+and should point to respective interrupt in that controller in its
+interrupt-map.
+
+The code which is the only documentation of how the Faraday PCI (the non-dual
+variant) interrupts assigns the default interrupt mapping/swizzling has
+typically been like this, doing the swizzling on the interrupt controller side
+rather than in the interconnect:
+
+interrupt-map-mask = <0xf800 0 0 7>;
+interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 1>,
+ <0x6000 0 0 4 &pci_intc 2>;
+
+Example:
+
+pci@50000000 {
+ compatible = "cortina,gemini-pci", "faraday,ftpci100";
+ reg = <0x50000000 0x100>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */
+ <26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */
+ <27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */
+ <28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ bus-range = <0x00 0xff>;
+ ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
+ <0x01000000 0 0 0x50000000 0 0x00100000>,
+ /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+ <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+ /* DMA ranges */
+ dma-ranges =
+ /* 128MiB at 0x00000000-0x07ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+ /* 64MiB at 0x00000000-0x03ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+ /* 64MiB at 0x00000000-0x03ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 0>,
+ <0x6000 0 0 4 &pci_intc 0>;
+ pci_intc: interrupt-controller {
+ interrupt-parent = <&intcon>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index 83aeb1f..e3d5680 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -4,7 +4,11 @@
and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:
-- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie"
+- compatible:
+ - "fsl,imx6q-pcie"
+ - "fsl,imx6sx-pcie",
+ - "fsl,imx6qp-pcie"
+ - "fsl,imx7d-pcie"
- reg: base address and length of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
@@ -34,6 +38,14 @@
- clock names: Must include the following additional entries:
- "pcie_inbound_axi"
+Additional required properties for imx7d-pcie:
+- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
+- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
+ IP block
+- reset-names: Must contain the following entires:
+ - "pciephy"
+ - "apps"
+
Example:
pcie@0x01000000 {
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 60e2516..6a07c96 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -1,17 +1,22 @@
TI PCI Controllers
PCIe Designware Controller
- - compatible: Should be "ti,dra7-pcie""
- - reg : Two register ranges as listed in the reg-names property
- - reg-names : The first entry must be "ti-conf" for the TI specific registers
- The second entry must be "rc-dbics" for the designware pcie
- registers
- The third entry must be "config" for the PCIe configuration space
+ - compatible: Should be "ti,dra7-pcie" for RC
+ Should be "ti,dra7-pcie-ep" for EP
- phys : list of PHY specifiers (used by generic PHY framework)
- phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
number of PHYs as specified in *phys* property.
- ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
where <X> is the instance number of the pcie from the HW spec.
+ - num-lanes as specified in ../designware-pcie.txt
+
+HOST MODE
+=========
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+ The second entry must be "rc-dbics" for the DesignWare PCIe
+ registers
+ The third entry must be "config" for the PCIe configuration space
- interrupts : Two interrupt entries must be specified. The first one is for
main interrupt line and the second for MSI interrupt line.
- #address-cells,
@@ -19,13 +24,36 @@
#interrupt-cells,
device_type,
ranges,
- num-lanes,
interrupt-map-mask,
interrupt-map : as specified in ../designware-pcie.txt
+DEVICE MODE
+===========
+ - reg : Four register ranges as listed in the reg-names property
+ - reg-names : "ti-conf" for the TI specific registers
+ "ep_dbics" for the standard configuration registers as
+ they are locally accessed within the DIF CS space
+ "ep_dbics2" for the standard configuration registers as
+ they are locally accessed within the DIF CS2 space
+ "addr_space" used to map remote RC address space
+ - interrupts : one interrupt entries must be specified for main interrupt.
+ - num-ib-windows : number of inbound address translation windows
+ - num-ob-windows : number of outbound address translation windows
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+ should contain the register offset within syscon
+ and the 2nd argument should contain the bit field
+ for setting the bit to enable unaligned
+ access.
+
Optional Property:
- gpios : Should be added if a gpio line is required to drive PERST# line
+NOTE: Two DT nodes may be added for each PCI controller; one for host
+mode and another for device mode. So in order for PCI to
+work in host mode, EP mode DT node should be disabled and in order to PCI to
+work in EP mode, host mode DT node should be disabled. Host mode and EP
+mode are mutually exclusive.
+
Example:
axi {
compatible = "simple-bus";
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
index 65cc034..6c14989 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -1,22 +1,42 @@
Freescale i.MX General Power Controller
=======================================
-The i.MX6Q General Power Control (GPC) block contains DVFS load tracking
-counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power
-domains.
+The i.MX6 General Power Control (GPC) block contains DVFS load tracking
+counters and Power Gating Control (PGC).
Required properties:
-- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc"
+- compatible: Should be one of the following:
+ - fsl,imx6q-gpc
+ - fsl,imx6qp-gpc
+ - fsl,imx6sl-gpc
- reg: should be register base and length as documented in the
datasheet
-- interrupts: Should contain GPC interrupt request 1
-- pu-supply: Link to the LDO regulator powering the PU power domain
-- clocks: Clock phandles to devices in the PU power domain that need
- to be enabled during domain power-up for reset propagation.
-- #power-domain-cells: Should be 1, see below:
+- interrupts: Should contain one interrupt specifier for the GPC interrupt
+- clocks: Must contain an entry for each entry in clock-names.
+ See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - ipg
-The gpc node is a power-controller as documented by the generic power domain
-bindings in Documentation/devicetree/bindings/power/power_domain.txt.
+The power domains are generic power domain providers as documented in
+Documentation/devicetree/bindings/power/power_domain.txt. They are described as
+subnodes of the power gating controller 'pgc' node of the GPC and should
+contain the following:
+
+Required properties:
+- reg: Must contain the DOMAIN_INDEX of this power domain
+ The following DOMAIN_INDEX values are valid for i.MX6Q:
+ ARM_DOMAIN 0
+ PU_DOMAIN 1
+ The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+ DISPLAY_DOMAIN 2
+
+- #power-domain-cells: Should be 0
+
+Optional properties:
+- clocks: a number of phandles to clocks that need to be enabled during domain
+ power-up sequencing to ensure reset propagation into devices located inside
+ this power domain
+- power-supply: a phandle to the regulator powering this domain
Example:
@@ -25,14 +45,30 @@
reg = <0x020dc000 0x4000>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
<0 90 IRQ_TYPE_LEVEL_HIGH>;
- pu-supply = <®_pu>;
- clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
- <&clks IMX6QDL_CLK_GPU3D_SHADER>,
- <&clks IMX6QDL_CLK_GPU2D_CORE>,
- <&clks IMX6QDL_CLK_GPU2D_AXI>,
- <&clks IMX6QDL_CLK_OPENVG_AXI>,
- <&clks IMX6QDL_CLK_VPU_AXI>;
- #power-domain-cells = <1>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
+ clock-names = "ipg";
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@0 {
+ reg = <0>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_pu: power-domain@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ power-supply = <®_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ };
+ };
};
@@ -40,20 +76,13 @@
======================================
IP cores belonging to a power domain should contain a 'power-domains' property
-that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying
-the power domain the device belongs to.
+that is a phandle pointing to the power domain the device belongs to.
Example of a device that is part of the PU power domain:
vpu: vpu@02040000 {
reg = <0x02040000 0x3c000>;
/* ... */
- power-domains = <&gpc 1>;
+ power-domains = <&pd_pu>;
/* ... */
};
-
-The following DOMAIN_INDEX values are valid for i.MX6Q:
-ARM_DOMAIN 0
-PU_DOMAIN 1
-The following additional DOMAIN_INDEX value is valid for i.MX6SL:
-DISPLAY_DOMAIN 2
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
new file mode 100644
index 0000000..02f45c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
@@ -0,0 +1,71 @@
+Freescale i.MX General Power Controller v2
+==========================================
+
+The i.MX7S/D General Power Control (GPC) block contains Power Gating
+Control (PGC) for various power domains.
+
+Required properties:
+
+- compatible: Should be "fsl,imx7d-gpc"
+
+- reg: should be register base and length as documented in the
+ datasheet
+
+- interrupts: Should contain GPC interrupt request 1
+
+Power domains contained within GPC node are generic power domain
+providers, documented in
+Documentation/devicetree/bindings/power/power_domain.txt, which are
+described as subnodes of the power gating controller 'pgc' node,
+which, in turn, is expected to contain the following:
+
+Required properties:
+
+- reg: Power domain index. Valid values are defined in
+ include/dt-bindings/power/imx7-power.h
+
+- #power-domain-cells: Should be 0
+
+Optional properties:
+
+- power-supply: Power supply used to power the domain
+
+Example:
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx7d-gpc";
+ reg = <0x303a0000 0x1000>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&intc>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_pcie_phy: power-domain@3 {
+ #power-domain-cells = <0>;
+
+ reg = <IMX7_POWER_DOMAIN_PCIE_PHY>;
+ power-supply = <®_1p0d>;
+ };
+ };
+ };
+
+
+Specifying power domain for IP modules
+======================================
+
+IP cores belonging to a power domain should contain a 'power-domains'
+property that is a phandle for PGC node representing the domain.
+
+Example of a device that is part of the PCIE_PHY power domain:
+
+ pcie: pcie@33800000 {
+ reg = <0x33800000 0x4000>,
+ <0x4ff00000 0x80000>;
+ /* ... */
+ power-domains = <&pgc_pcie_phy>;
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
index 02331b9..c8c831d 100644
--- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
@@ -4,6 +4,7 @@
- compatible: should be one of:
- "atmel,at91sam9rl-pwm"
- "atmel,sama5d3-pwm"
+ - "atmel,sama5d2-pwm"
- reg: physical base address and length of the controller's registers
- #pwm-cells: Should be 3. See pwm.txt in this directory for a
description of the cells format.
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index b4e7377..c57e11b 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -19,6 +19,19 @@
- reset-names: Must include the following entries:
- pwm
+Optional properties:
+============================
+In some of the interface like PWM based regulator device, it is required
+to configure the pins differently in different states, especially in suspend
+state of the system. The configuration of pin is provided via the pinctrl
+DT node as detailed in the pinctrl DT binding document
+ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+The PWM node will have following optional properties.
+pinctrl-names: Pin state names. Must be "default" and "sleep".
+pinctrl-0: phandle for the default/active state of pin configurations.
+pinctrl-1: phandle for the sleep state of pin configurations.
+
Example:
pwm: pwm@7000a000 {
@@ -29,3 +42,35 @@
resets = <&tegra_car 17>;
reset-names = "pwm";
};
+
+
+Example with the pin configuration for suspend and resume:
+=========================================================
+Suppose pin PE7 (On Tegra210) interfaced with the regulator device and
+it requires PWM output to be tristated when system enters suspend.
+Following will be DT binding to achieve this:
+
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@700008d4 {
+ pwm_active_state: pwm_active_state {
+ pe7 {
+ nvidia,pins = "pe7";
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+
+ pwm_sleep_state: pwm_sleep_state {
+ pe7 {
+ nvidia,pins = "pe7";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
+ pwm@7000a000 {
+ /* Mandatory PWM properties */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pwm_active_state>;
+ pinctrl-1 = <&pwm_sleep_state>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
new file mode 100644
index 0000000..54c59b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
@@ -0,0 +1,34 @@
+MediaTek PWM controller
+
+Required properties:
+ - compatible: should be "mediatek,<name>-pwm":
+ - "mediatek,mt7623-pwm": found on mt7623 SoC.
+ - reg: physical base address and length of the controller's registers.
+ - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
+ the cell format.
+ - clocks: phandle and clock specifier of the PWM reference clock.
+ - clock-names: must contain the following:
+ - "top": the top clock generator
+ - "main": clock used by the PWM core
+ - "pwm1-5": the five per PWM clocks
+ - pinctrl-names: Must contain a "default" entry.
+ - pinctrl-0: One property must exist for each entry in pinctrl-names.
+ See pinctrl/pinctrl-bindings.txt for details of the property values.
+
+Example:
+ pwm0: pwm@11006000 {
+ compatible = "mediatek,mt7623-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM>,
+ <&pericfg CLK_PERI_PWM1>,
+ <&pericfg CLK_PERI_PWM2>,
+ <&pericfg CLK_PERI_PWM3>,
+ <&pericfg CLK_PERI_PWM4>,
+ <&pericfg CLK_PERI_PWM5>;
+ clock-names = "top", "main", "pwm1", "pwm2",
+ "pwm3", "pwm4", "pwm5";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
new file mode 100644
index 0000000..5e1afc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -0,0 +1,47 @@
+Freescale i.MX7 System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "fsl,imx7-src", "syscon"
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain SRC interrupt
+- #reset-cells: 1, see below
+
+example:
+
+src: reset-controller@30390000 {
+ compatible = "fsl,imx7d-src", "syscon";
+ reg = <0x30390000 0x2000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+};
+
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The system reset controller can be used to reset various set of
+peripherals. Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+Example:
+
+ pcie: pcie@33800000 {
+
+ ...
+
+ resets = <&src IMX7_RESET_PCIEPHY>,
+ <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
+ reset-names = "pciephy", "apps";
+
+ ...
+ };
+
+
+For list of all valid reset indicies see
+<dt-bindings/reset/imx7-reset.h>
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
index 2aff0f2..cab40f0 100644
--- a/Documentation/devicetree/bindings/serial/sprd-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -1,7 +1,19 @@
* Spreadtrum serial UART
Required properties:
-- compatible: must be "sprd,sc9836-uart"
+- compatible: must be one of:
+ * "sprd,sc9836-uart"
+ * "sprd,sc9860-uart", "sprd,sc9836-uart"
+
- reg: offset and length of the register set for the device
- interrupts: exactly one interrupt specifier
- clocks: phandles to input clocks.
+
+Example:
+ uart0: serial@0 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
index 13ec099..cc9f05d 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
@@ -18,6 +18,7 @@
- "rockchip,rk3188-grf", "syscon": for rk3188
- "rockchip,rk3228-grf", "syscon": for rk3228
- "rockchip,rk3288-grf", "syscon": for rk3288
+ - "rockchip,rk3328-grf", "syscon": for rk3328
- "rockchip,rk3368-grf", "syscon": for rk3368
- "rockchip,rk3399-grf", "syscon": for rk3399
- compatible: PMUGRF should be one of the following:
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
new file mode 100644
index 0000000..c705db0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -0,0 +1,57 @@
+Texas Instruments TI-SCI Generic Power Domain
+---------------------------------------------
+
+Some TI SoCs contain a system controller (like the PMMC, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI-SCI [1].
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the PMMC, which
+in this case is the implementation as documented by the generic PM domain
+bindings in Documentation/devicetree/bindings/power/power_domain.txt. Because
+this relies on the TI SCI protocol to communicate with the PMMC it must be a
+child of the pmmc node.
+
+Required Properties:
+--------------------
+- compatible: should be "ti,sci-pm-domain"
+- #power-domain-cells: Must be 1 so that an id can be provided in each
+ device node.
+
+Example (K2G):
+-------------
+ pmmc: pmmc {
+ compatible = "ti,k2g-sci";
+ ...
+
+ k2g_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+ };
+
+PM Domain Consumers
+===================
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node
+along with an index representing the device id to be passed to the PMMC
+for device control.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain node
+ and an ID representing the device.
+
+See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
+
+Example (K2G):
+--------------------
+ uart0: serial@02530c00 {
+ compatible = "ns16550a";
+ ...
+ power-domains = <&k2g_pds K2G_DEV_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
index ccb844a..717c5f6 100644
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -18,10 +18,26 @@
- phy-names: Should be "usb-phy"
+ - dmas: specifies the dma channels
+
+ - dma-names: specifies the names of the channels. Use "rxN" for receive
+ and "txN" for transmit endpoints. N specifies the endpoint number.
+
Optional properties:
~~~~~~~~~~~~~~~~~~~~
- vbus-supply: Phandle to a regulator providing the USB bus power.
+DMA
+~~~
+- compatible: ti,da830-cppi41
+- reg: offset and length of the following register spaces: CPPI DMA Controller,
+ CPPI DMA Scheduler, Queue Manager
+- reg-names: "controller", "scheduler", "queuemgr"
+- #dma-cells: should be set to 2. The first number represents the
+ channel number (0 … 3 for endpoints 1 … 4).
+ The second number is 0 for RX and 1 for TX transfers.
+- #dma-channels: should be set to 4 representing the 4 endpoints.
+
Example:
usb_phy: usb-phy {
compatible = "ti,da830-usb-phy";
@@ -30,7 +46,10 @@
};
usb0: usb@200000 {
compatible = "ti,da830-musb";
- reg = <0x00200000 0x10000>;
+ reg = <0x00200000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <58>;
interrupt-names = "mc";
@@ -39,5 +58,25 @@
phys = <&usb_phy 0>;
phy-names = "usb-phy";
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 0 1 &cppi41dma 1 1
+ &cppi41dma 2 1 &cppi41dma 3 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4",
+ "tx1", "tx2", "tx3", "tx4";
+
status = "okay";
+
+ cppi41dma: dma-controller@201000 {
+ compatible = "ti,da830-cppi41";
+ reg = <0x201000 0x1000
+ 0x202000 0x1000
+ 0x204000 0x4000>;
+ reg-names = "controller", "scheduler", "queuemgr";
+ interrupts = <58>;
+ #dma-cells = <2>;
+ #dma-channels = <4>;
+ };
+
};
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 6c7c2bce..00bea03 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -14,6 +14,10 @@
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
- snps,dwc2: A generic DWC2 USB controller with default parameters.
+ - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
+ configured in FS mode;
+ - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
+ configured in HS mode;
- reg : Should contain 1 register range (address and length)
- interrupts : Should contain 1 interrupt
- clocks: clock provider specifier
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ee55847..f9fe945 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -139,6 +139,7 @@
honeywell Honeywell
hp Hewlett Packard
holtek Holtek Semiconductor, Inc.
+hwacom HwaCom Systems Inc.
i2se I2SE GmbH
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
@@ -162,6 +163,7 @@
karo Ka-Ro electronics GmbH
keithkoep Keith & Koep GmbH
keymile Keymile GmbH
+khadas Khadas
kinetic Kinetic Technologies
kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
diff --git a/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt b/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
new file mode 100644
index 0000000..bc4b865
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
@@ -0,0 +1,17 @@
+Cortina Systems Gemini SoC Watchdog
+
+Required properties:
+- compatible : must be "cortina,gemini-watchdog"
+- reg : shall contain base register location and length
+- interrupts : shall contain the interrupt for the watchdog
+
+Optional properties:
+- timeout-sec : the default watchdog timeout in seconds.
+
+Example:
+
+watchdog@41000000 {
+ compatible = "cortina,gemini-watchdog";
+ reg = <0x41000000 0x1000>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index bf34d5b..e72587f 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -342,8 +342,10 @@
devm_free_percpu()
PCI
- pcim_enable_device() : after success, all PCI ops become managed
- pcim_pin_device() : keep PCI device enabled after release
+ devm_pci_remap_cfgspace() : ioremap PCI configuration space
+ devm_pci_remap_cfg_resource() : ioremap PCI configuration space resource
+ pcim_enable_device() : after success, all PCI ops become managed
+ pcim_pin_device() : keep PCI device enabled after release
PHY
devm_usb_get_phy()
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 6ea1ced..06f1d64 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -113,9 +113,18 @@
--------------------------------------
In order to support PCI resource mapping as described above, Linux platform
-code must define HAVE_PCI_MMAP and provide a pci_mmap_page_range function.
-Platforms are free to only support subsets of the mmap functionality, but
-useful return codes should be provided.
+code should ideally define ARCH_GENERIC_PCI_MMAP_RESOURCE and use the generic
+implementation of that functionality. To support the historical interface of
+mmap() through files in /proc/bus/pci, platforms may also set HAVE_PCI_MMAP.
+
+Alternatively, platforms which set HAVE_PCI_MMAP may provide their own
+implementation of pci_mmap_page_range() instead of defining
+ARCH_GENERIC_PCI_MMAP_RESOURCE.
+
+Platforms which support write-combining maps of PCI resources must define
+arch_can_pci_mmap_wc() which shall evaluate to non-zero at runtime when
+write-combining is permitted. Platforms which support maps of I/O resources
+define arch_can_pci_mmap_io() similarly.
Legacy resources are protected by the HAVE_PCI_LEGACY define. Platforms
wishing to support legacy functionality should define it and provide
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 94dd27e..f42b906 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -694,8 +694,7 @@
write_end: After a successful write_begin, and data copy, write_end must
be called. len is the original len passed to write_begin, and copied
- is the amount that was able to be copied (copied == len is always true
- if write_begin was called with the AOP_FLAG_UNINTERRUPTIBLE flag).
+ is the amount that was able to be copied.
The filesystem must take care of unlocking the page and releasing it
refcount, and updating i_size.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index a77ead9..eccb675 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -191,6 +191,7 @@
'W' 00-1F linux/watchdog.h conflict!
'W' 00-1F linux/wanrouter.h conflict! (pre 3.9)
'W' 00-3F sound/asound.h conflict!
+'W' 40-5F drivers/pci/switch/switchtec.c
'X' all fs/xfs/xfs_fs.h conflict!
and fs/xfs/linux-2.6/xfs_ioctl32.h
and include/linux/falloc.h
diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt
new file mode 100644
index 0000000..4ebc359
--- /dev/null
+++ b/Documentation/misc-devices/pci-endpoint-test.txt
@@ -0,0 +1,35 @@
+Driver for PCI Endpoint Test Function
+
+This driver should be used as a host side driver if the root complex is
+connected to a configurable PCI endpoint running *pci_epf_test* function
+driver configured according to [1].
+
+The "pci_endpoint_test" driver can be used to perform the following tests.
+
+The PCI driver for the test device performs the following tests
+ *) verifying addresses programmed in BAR
+ *) raise legacy IRQ
+ *) raise MSI IRQ
+ *) read data
+ *) write data
+ *) copy data
+
+This misc driver creates /dev/pci-endpoint-test.<num> for every
+*pci_epf_test* function connected to the root complex and "ioctls"
+should be used to perform the above tests.
+
+ioctl
+-----
+ PCITEST_BAR: Tests the BAR. The number of the BAR to be tested
+ should be passed as argument.
+ PCITEST_LEGACY_IRQ: Tests legacy IRQ
+ PCITEST_MSI: Tests message signalled interrupts. The MSI number
+ to be tested should be passed as argument.
+ PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
+ as argument.
+ PCITEST_READ: Perform read tests. The size of the buffer should be passed
+ as argument.
+ PCITEST_COPY: Perform read tests. The size of the buffer should be passed
+ as argument.
+
+[1] -> Documentation/PCI/endpoint/function/binding/pci-test.txt
diff --git a/Documentation/powerpc/firmware-assisted-dump.txt b/Documentation/powerpc/firmware-assisted-dump.txt
index 19b1e3d..9cabaf8 100644
--- a/Documentation/powerpc/firmware-assisted-dump.txt
+++ b/Documentation/powerpc/firmware-assisted-dump.txt
@@ -55,10 +55,14 @@
booted with restricted memory. By default, the boot memory
size will be the larger of 5% of system RAM or 256MB.
Alternatively, user can also specify boot memory size
- through boot parameter 'fadump_reserve_mem=' which will
- override the default calculated size. Use this option
- if default boot memory size is not sufficient for second
- kernel to boot successfully.
+ through boot parameter 'crashkernel=' which will override
+ the default calculated size. Use this option if default
+ boot memory size is not sufficient for second kernel to
+ boot successfully. For syntax of crashkernel= parameter,
+ refer to Documentation/kdump/kdump.txt. If any offset is
+ provided in crashkernel= parameter, it will be ignored
+ as fadump reserves memory at end of RAM for boot memory
+ dump preservation in case of a crash.
-- After the low memory (boot memory) area has been saved, the
firmware will reset PCI and other hardware state. It will
@@ -158,13 +162,16 @@
1. Set config option CONFIG_FA_DUMP=y and build kernel.
2. Boot into linux kernel with 'fadump=on' kernel cmdline option.
-3. Optionally, user can also set 'fadump_reserve_mem=' kernel cmdline
+3. Optionally, user can also set 'crashkernel=' kernel cmdline
to specify size of the memory to reserve for boot memory dump
preservation.
-NOTE: If firmware-assisted dump fails to reserve memory then it will
- fallback to existing kdump mechanism if 'crashkernel=' option
- is set at kernel cmdline.
+NOTE: 1. 'fadump_reserve_mem=' parameter has been deprecated. Instead
+ use 'crashkernel=' to specify size of the memory to reserve
+ for boot memory dump preservation.
+ 2. If firmware-assisted dump fails to reserve memory then it
+ will fallback to existing kdump mechanism if 'crashkernel='
+ option is set at kernel cmdline.
Sysfs/debugfs files:
------------
diff --git a/Documentation/switchtec.txt b/Documentation/switchtec.txt
new file mode 100644
index 0000000..a0a9c7b
--- /dev/null
+++ b/Documentation/switchtec.txt
@@ -0,0 +1,80 @@
+========================
+Linux Switchtec Support
+========================
+
+Microsemi's "Switchtec" line of PCI switch devices is already
+supported by the kernel with standard PCI switch drivers. However, the
+Switchtec device advertises a special management endpoint which
+enables some additional functionality. This includes:
+
+* Packet and Byte Counters
+* Firmware Upgrades
+* Event and Error logs
+* Querying port link status
+* Custom user firmware commands
+
+The switchtec kernel module implements this functionality.
+
+
+Interface
+=========
+
+The primary means of communicating with the Switchtec management firmware is
+through the Memory-mapped Remote Procedure Call (MRPC) interface.
+Commands are submitted to the interface with a 4-byte command
+identifier and up to 1KB of command specific data. The firmware will
+respond with a 4 bytes return code and up to 1KB of command specific
+data. The interface only processes a single command at a time.
+
+
+Userspace Interface
+===================
+
+The MRPC interface will be exposed to userspace through a simple char
+device: /dev/switchtec#, one for each management endpoint in the system.
+
+The char device has the following semantics:
+
+* A write must consist of at least 4 bytes and no more than 1028 bytes.
+ The first four bytes will be interpreted as the command to run and
+ the remainder will be used as the input data. A write will send the
+ command to the firmware to begin processing.
+
+* Each write must be followed by exactly one read. Any double write will
+ produce an error and any read that doesn't follow a write will
+ produce an error.
+
+* A read will block until the firmware completes the command and return
+ the four bytes of status plus up to 1024 bytes of output data. (The
+ length will be specified by the size parameter of the read call --
+ reading less than 4 bytes will produce an error.
+
+* The poll call will also be supported for userspace applications that
+ need to do other things while waiting for the command to complete.
+
+The following IOCTLs are also supported by the device:
+
+* SWITCHTEC_IOCTL_FLASH_INFO - Retrieve firmware length and number
+ of partitions in the device.
+
+* SWITCHTEC_IOCTL_FLASH_PART_INFO - Retrieve address and lengeth for
+ any specified partition in flash.
+
+* SWITCHTEC_IOCTL_EVENT_SUMMARY - Read a structure of bitmaps
+ indicating all uncleared events.
+
+* SWITCHTEC_IOCTL_EVENT_CTL - Get the current count, clear and set flags
+ for any event. This ioctl takes in a switchtec_ioctl_event_ctl struct
+ with the event_id, index and flags set (index being the partition or PFF
+ number for non-global events). It returns whether the event has
+ occurred, the number of times and any event specific data. The flags
+ can be used to clear the count or enable and disable actions to
+ happen when the event occurs.
+ By using the SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL flag,
+ you can set an event to trigger a poll command to return with
+ POLLPRI. In this way, userspace can wait for events to occur.
+
+* SWITCHTEC_IOCTL_PFF_TO_PORT and SWITCHTEC_IOCTL_PORT_TO_PFF convert
+ between PCI Function Framework number (used by the event system)
+ and Switchtec Logic Port ID and Partition number (which is more
+ user friendly).
diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt
index cd28d5e..4dde03b 100644
--- a/Documentation/vm/transhuge.txt
+++ b/Documentation/vm/transhuge.txt
@@ -266,7 +266,7 @@
The number of file transparent huge pages mapped to userspace is available
by reading ShmemPmdMapped and ShmemHugePages fields in /proc/meminfo.
-To identify what applications are mapping file transparent huge pages, it
+To identify what applications are mapping file transparent huge pages, it
is necessary to read /proc/PID/smaps and count the FileHugeMapped fields
for each mapping.
@@ -292,7 +292,7 @@
the allocation.
thp_file_alloc is incremented every time a file huge page is successfully
-i allocated.
+ allocated.
thp_file_mapped is incremented every time a file huge page is mapped into
user address space.
@@ -501,7 +501,7 @@
All tail pages have zero ->_refcount until atomic_add(). This prevents the
scanner from getting a reference to the tail page up to that point. After the
-atomic_add() we don't care about the ->_refcount value. We already known how
+atomic_add() we don't care about the ->_refcount value. We already known how
many references should be uncharged from the head page.
For head page get_page_unless_zero() will succeed and we don't mind. It's
@@ -519,8 +519,8 @@
Splitting the page right away is not an option due to locking context in
the place where we can detect partial unmap. It's also might be
-counterproductive since in many cases partial unmap unmap happens during
-exit(2) if an THP crosses VMA boundary.
+counterproductive since in many cases partial unmap happens during exit(2) if
+a THP crosses a VMA boundary.
Function deferred_split_huge_page() is used to queue page for splitting.
The splitting itself will happen when we get memory pressure via shrinker
diff --git a/MAINTAINERS b/MAINTAINERS
index 08360bb..f42daf7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -653,7 +653,9 @@
S: Maintained
F: drivers/gpio/gpio-altera-a10sr.c
F: drivers/mfd/altera-a10sr.c
+F: drivers/reset/reset-a10sr.c
F: include/linux/mfd/altera-a10sr.h
+F: include/dt-bindings/reset/altr,rst-mgr-a10sr.h
ALTERA TRIPLE SPEED ETHERNET DRIVER
M: Vince Bridgers <vbridger@opensource.altera.com>
@@ -1056,8 +1058,13 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: sun[x456789]i
-F: arch/arm/boot/dts/ntc-gr8*
+N: sun50i
+F: arch/arm/mach-sunxi/
F: arch/arm64/boot/dts/allwinner/
+F: drivers/clk/sunxi-ng/
+F: drivers/pinctrl/sunxi/
+F: drivers/soc/sunxi/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>
@@ -1110,7 +1117,6 @@
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@microchip.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.linux4sam.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
@@ -1122,6 +1128,7 @@
F: arch/arm/boot/dts/sama*.dts
F: arch/arm/boot/dts/sama*.dtsi
F: arch/arm/include/debug/at91.S
+F: drivers/memory/atmel*
ARM/ATMEL AT91 Clock Support
M: Boris Brezillon <boris.brezillon@free-electrons.com>
@@ -1277,6 +1284,7 @@
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
F: drivers/clk/imx/
+F: drivers/soc/imx/
F: include/soc/imx/
ARM/FREESCALE VYBRID ARM ARCHITECTURE
@@ -1497,6 +1505,7 @@
M: Gregory Clement <gregory.clement@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+F: Documentation/devicetree/bindings/soc/dove/
F: arch/arm/mach-dove/
F: arch/arm/mach-mv78xx0/
F: arch/arm/mach-orion5x/
@@ -2667,9 +2676,9 @@
F: arch/arm/mach-bcm/
BROADCOM BCM2835 ARM ARCHITECTURE
-M: Stephen Warren <swarren@wwwdotorg.org>
M: Lee Jones <lee@kernel.org>
M: Eric Anholt <eric@anholt.net>
+M: Stefan Wahren <stefan.wahren@i2se.com>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/anholt/linux
@@ -2689,12 +2698,14 @@
BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
+M: Jon Mason <jonmason@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: arch/arm/mach-bcm/bcm_5301x.c
F: arch/arm/boot/dts/bcm5301x*.dtsi
F: arch/arm/boot/dts/bcm470*
+F: arch/arm/boot/dts/bcm953012*
BROADCOM BCM53573 ARM ARCHITECTURE
M: Rafał Miłecki <rafal@milecki.pl>
@@ -2856,13 +2867,6 @@
S: Supported
F: drivers/net/ethernet/broadcom/bcmsysport.*
-BROADCOM VULCAN ARM64 SOC
-M: Jayachandran C. <c.jayachandran@gmail.com>
-M: bcm-kernel-feedback-list@broadcom.com
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm64/boot/dts/broadcom/vulcan*
-
BROADCOM NETXTREME-E ROCE DRIVER
M: Selvin Xavier <selvin.xavier@broadcom.com>
M: Devesh Sharma <devesh.sharma@broadcom.com>
@@ -3056,7 +3060,7 @@
M: Jayachandran C <jnair@caviumnetworks.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: arch/arm64/boot/dts/cavium/thunder-99xx*
+F: arch/arm64/boot/dts/cavium/thunder2-99xx*
F: Documentation/devicetree/bindings/arm/cavium-thunder2.txt
CAVIUM I2C DRIVER
@@ -8418,7 +8422,7 @@
M: Richard Genoud <richard.genoud@gmail.com>
S: Maintained
F: drivers/tty/serial/atmel_serial.c
-F: include/linux/atmel_serial.h
+F: drivers/tty/serial/atmel_serial.h
MICROCHIP / ATMEL DMA DRIVER
M: Ludovic Desroches <ludovic.desroches@microchip.com>
@@ -9723,6 +9727,15 @@
F: arch/x86/pci/
F: arch/x86/kernel/quirks.c
+PCI ENDPOINT SUBSYSTEM
+M: Kishon Vijay Abraham I <kishon@ti.com>
+L: linux-pci@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git
+S: Supported
+F: drivers/pci/endpoint/
+F: drivers/misc/pci_endpoint_test.c
+F: tools/pci/
+
PCI DRIVER FOR ALTERA PCIE IP
M: Ley Foon Tan <lftan@altera.com>
L: rfi@lists.rocketboards.org (moderated for non-subscribers)
@@ -9797,6 +9810,17 @@
F: Documentation/devicetree/bindings/pci/aardvark-pci.txt
F: drivers/pci/host/pci-aardvark.c
+PCI DRIVER FOR MICROSEMI SWITCHTEC
+M: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
+M: Stephen Bates <stephen.bates@microsemi.com>
+M: Logan Gunthorpe <logang@deltatee.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/switchtec.txt
+F: Documentation/ABI/testing/sysfs-class-switchtec
+F: drivers/pci/switch/switchtec*
+F: include/uapi/linux/switchtec_ioctl.h
+
PCI DRIVER FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
@@ -12496,9 +12520,8 @@
F: drivers/media/rc/ttusbir.c
TEGRA ARCHITECTURE SUPPORT
-M: Stephen Warren <swarren@wwwdotorg.org>
M: Thierry Reding <thierry.reding@gmail.com>
-M: Alexandre Courbot <gnurou@gmail.com>
+M: Jonathan Hunter <jonathanh@nvidia.com>
L: linux-tegra@vger.kernel.org
Q: http://patchwork.ozlabs.org/project/linux-tegra/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git
@@ -12577,6 +12600,9 @@
F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
F: drivers/firmware/ti_sci*
F: include/linux/soc/ti/ti_sci_protocol.h
+F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+F: include/dt-bindings/genpd/k2g.h
+F: drivers/soc/ti/ti_sci_pm_domains.c
THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/Makefile b/Makefile
index 43534cc..220121f 100644
--- a/Makefile
+++ b/Makefile
@@ -1374,7 +1374,7 @@
@echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
echo ' (default: $(INSTALL_HDR_PATH))'; \
echo ''
- @echo 'Static analysers'
+ @echo 'Static analysers:'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
@echo ' versioncheck - Sanity check on version.h usage'
@@ -1384,7 +1384,7 @@
@echo ' headerdep - Detect inclusion cycles in headers'
@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
@echo ''
- @echo 'Kernel selftest'
+ @echo 'Kernel selftest:'
@echo ' kselftest - Build and run kernel selftest (run as root)'
@echo ' Build, install, and boot kernel before'
@echo ' running kselftest on it'
@@ -1392,6 +1392,10 @@
@echo ' kselftest-merge - Merge all the config dependencies of kselftest to existed'
@echo ' .config.'
@echo ''
+ @echo 'Userspace tools targets:'
+ @echo ' use "make tools/help"'
+ @echo ' or "cd tools; make help"'
+ @echo ''
@echo 'Kernel packaging:'
@$(MAKE) $(build)=$(package-dir) help
@echo ''
diff --git a/arch/Kconfig b/arch/Kconfig
index 6409994..dcbd462 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -2,7 +2,11 @@
# General architecture dependent options
#
+config CRASH_CORE
+ bool
+
config KEXEC_CORE
+ select CRASH_CORE
bool
config HAVE_IMA_KEXEC
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 5d7fb3e..a545969 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -444,6 +444,7 @@
bool "Support for the 40-bit Physical Address Extension"
default n
depends on ISA_ARCV2
+ select HIGHMEM
help
Enable access to physical memory beyond 4G, only supported on
ARC cores with 40 bit Physical Addressing support
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index d6c1bbc..41cfb29 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -51,7 +51,7 @@
pguclk: pguclk {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <74440000>;
+ clock-frequency = <74250000>;
};
};
@@ -149,12 +149,13 @@
interrupts = <14>;
};
- i2c@0x1e000 {
- compatible = "snps,designware-i2c";
+ i2s: i2s@1e000 {
+ compatible = "snps,designware-i2s";
reg = <0x1e000 0x100>;
- clock-frequency = <400000>;
- clocks = <&i2cclk>;
+ clocks = <&i2sclk 0>;
+ clock-names = "i2sclk";
interrupts = <15>;
+ #sound-dai-cells = <0>;
};
i2c@0x1f000 {
@@ -174,6 +175,7 @@
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,clock-delay = <0x03>;
+ #sound-dai-cells = <0>;
ports {
#address-cells = <1>;
@@ -295,5 +297,17 @@
};
};
};
+
+ sound_playback {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AXS10x HDMI Audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&adv7511>;
+ };
+ };
};
};
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index 5008021..19ebddf 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -62,6 +62,8 @@ extern unsigned long perip_base, perip_end;
#define ARC_REG_IC_BCR 0x77 /* Build Config reg */
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
+#define ARC_REG_IC_IVIR 0x16
+#define ARC_REG_IC_ENDR 0x17
#define ARC_REG_IC_IVIL 0x19
#define ARC_REG_IC_PTAG 0x1E
#define ARC_REG_IC_PTAG_HI 0x1F
@@ -76,6 +78,8 @@ extern unsigned long perip_base, perip_end;
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
+#define ARC_REG_DC_STARTR 0x4D
+#define ARC_REG_DC_ENDR 0x4E
#define ARC_REG_DC_PTAG 0x5C
#define ARC_REG_DC_PTAG_HI 0x5F
@@ -83,6 +87,8 @@ extern unsigned long perip_base, perip_end;
#define DC_CTRL_DIS 0x001
#define DC_CTRL_INV_MODE_FLUSH 0x040
#define DC_CTRL_FLUSH_STATUS 0x100
+#define DC_CTRL_RGN_OP_INV 0x200
+#define DC_CTRL_RGN_OP_MSK 0x200
/*System-level cache (L2 cache) related Auxiliary registers */
#define ARC_REG_SLC_CFG 0x901
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index b144d7c..db7319e 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -9,6 +9,10 @@
#ifndef _ASM_ARC_MMU_H
#define _ASM_ARC_MMU_H
+#ifndef __ASSEMBLY__
+#include <linux/threads.h> /* NR_CPUS */
+#endif
+
#if defined(CONFIG_ARC_MMU_V1)
#define CONFIG_ARC_MMU_VER 1
#elif defined(CONFIG_ARC_MMU_V2)
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index ee22d40..08fe338 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -35,11 +35,11 @@
#ifndef _ASM_ARC_PGTABLE_H
#define _ASM_ARC_PGTABLE_H
-#include <asm/page.h>
-#include <asm/mmu.h>
+#include <linux/const.h>
#define __ARCH_USE_5LEVEL_HACK
#include <asm-generic/pgtable-nopmd.h>
-#include <linux/const.h>
+#include <asm/page.h>
+#include <asm/mmu.h> /* to propagate CONFIG_ARC_MMU_VER <n> */
/**************************************************************************
* Page Table Flags
diff --git a/arch/arc/include/uapi/asm/elf.h b/arch/arc/include/uapi/asm/elf.h
index 0037a58..06d95e6 100644
--- a/arch/arc/include/uapi/asm/elf.h
+++ b/arch/arc/include/uapi/asm/elf.h
@@ -27,6 +27,7 @@ typedef unsigned long elf_greg_t;
typedef unsigned long elf_fpregset_t;
#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+#define ELF_ARCV2REG (sizeof(struct user_regs_arcv2) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h
index 0b3ef63..dd206e6 100644
--- a/arch/arc/include/uapi/asm/ptrace.h
+++ b/arch/arc/include/uapi/asm/ptrace.h
@@ -47,6 +47,11 @@ struct user_regs_struct {
unsigned long efa; /* break pt addr, for break points in delay slots */
unsigned long stop_pc; /* give dbg stop_pc after ensuring brkpt trap */
};
+
+struct user_regs_arcv2 {
+ unsigned long r30, r58, r59;
+};
+
#endif /* !__ASSEMBLY__ */
#endif /* _UAPI__ASM_ARC_PTRACE_H */
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
index 3115006..5ee4676 100644
--- a/arch/arc/kernel/ptrace.c
+++ b/arch/arc/kernel/ptrace.c
@@ -184,19 +184,75 @@ static int genregs_set(struct task_struct *target,
return ret;
}
+#ifdef CONFIG_ISA_ARCV2
+static int arcv2regs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ const struct pt_regs *regs = task_pt_regs(target);
+ int ret, copy_sz;
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS))
+ copy_sz = sizeof(struct user_regs_arcv2);
+ else
+ copy_sz = 4; /* r30 only */
+
+ /*
+ * itemized copy not needed like above as layout of regs (r30,r58,r59)
+ * is exactly same in kernel (pt_regs) and userspace (user_regs_arcv2)
+ */
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, ®s->r30,
+ 0, copy_sz);
+
+ return ret;
+}
+
+static int arcv2regs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ const struct pt_regs *regs = task_pt_regs(target);
+ int ret, copy_sz;
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS))
+ copy_sz = sizeof(struct user_regs_arcv2);
+ else
+ copy_sz = 4; /* r30 only */
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, (void *)®s->r30,
+ 0, copy_sz);
+
+ return ret;
+}
+
+#endif
+
enum arc_getset {
- REGSET_GENERAL,
+ REGSET_CMN,
+ REGSET_ARCV2,
};
static const struct user_regset arc_regsets[] = {
- [REGSET_GENERAL] = {
+ [REGSET_CMN] = {
.core_note_type = NT_PRSTATUS,
.n = ELF_NGREG,
.size = sizeof(unsigned long),
.align = sizeof(unsigned long),
.get = genregs_get,
.set = genregs_set,
- }
+ },
+#ifdef CONFIG_ISA_ARCV2
+ [REGSET_ARCV2] = {
+ .core_note_type = NT_ARC_V2,
+ .n = ELF_ARCV2REG,
+ .size = sizeof(unsigned long),
+ .align = sizeof(unsigned long),
+ .get = arcv2regs_get,
+ .set = arcv2regs_set,
+ },
+#endif
};
static const struct user_regset_view user_arc_view = {
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index b6e4f7a..333daab 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -845,7 +845,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
* state->dataAlign;
break;
case DW_CFA_def_cfa_register:
- unw_debug("cfa_def_cfa_regsiter: ");
+ unw_debug("cfa_def_cfa_register: ");
state->cfa.reg = get_uleb128(&ptr.p8, end);
break;
/*todo case DW_CFA_def_cfa_expression: */
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 9285629..a867575 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -21,6 +21,10 @@
#include <asm/cachectl.h>
#include <asm/setup.h>
+#ifdef CONFIG_ISA_ARCV2
+#define USE_RGN_FLSH 1
+#endif
+
static int l2_line_sz;
static int ioc_exists;
int slc_enable = 1, ioc_enable = 1;
@@ -28,7 +32,7 @@ unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr,
- unsigned long sz, const int cacheop);
+ unsigned long sz, const int op, const int full_page);
void (*__dma_cache_wback_inv)(phys_addr_t start, unsigned long sz);
void (*__dma_cache_inv)(phys_addr_t start, unsigned long sz);
@@ -233,11 +237,10 @@ void read_decode_cache_bcr(void)
static inline
void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
- unsigned long sz, const int op)
+ unsigned long sz, const int op, const int full_page)
{
unsigned int aux_cmd;
int num_lines;
- const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
if (op == OP_INV_IC) {
aux_cmd = ARC_REG_IC_IVIL;
@@ -279,11 +282,10 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
*/
static inline
void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
- unsigned long sz, const int op)
+ unsigned long sz, const int op, const int full_page)
{
unsigned int aux_cmd, aux_tag;
int num_lines;
- const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
if (op == OP_INV_IC) {
aux_cmd = ARC_REG_IC_IVIL;
@@ -334,6 +336,8 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
}
}
+#ifndef USE_RGN_FLSH
+
/*
* In HS38x (MMU v4), I-cache is VIPT (can alias), D-cache is PIPT
* Here's how cache ops are implemented
@@ -349,17 +353,16 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
*/
static inline
void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
- unsigned long sz, const int cacheop)
+ unsigned long sz, const int op, const int full_page)
{
unsigned int aux_cmd;
int num_lines;
- const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE;
- if (cacheop == OP_INV_IC) {
+ if (op == OP_INV_IC) {
aux_cmd = ARC_REG_IC_IVIL;
} else {
/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
- aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
+ aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
}
/* Ensure we properly floor/ceil the non-line aligned/sized requests
@@ -368,7 +371,7 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
* -@paddr will be cache-line aligned already (being page aligned)
* -@sz will be integral multiple of line size (being page sized).
*/
- if (!full_page_op) {
+ if (!full_page) {
sz += paddr & ~CACHE_LINE_MASK;
paddr &= CACHE_LINE_MASK;
}
@@ -381,7 +384,7 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
* - (and needs to be written before the lower 32 bits)
*/
if (is_pae40_enabled()) {
- if (cacheop == OP_INV_IC)
+ if (op == OP_INV_IC)
/*
* Non aliasing I-cache in HS38,
* aliasing I-cache handled in __cache_line_loop_v3()
@@ -397,6 +400,55 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
}
}
+#else
+
+/*
+ * optimized flush operation which takes a region as opposed to iterating per line
+ */
+static inline
+void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
+ unsigned long sz, const int op, const int full_page)
+{
+ unsigned int s, e;
+
+ /* Only for Non aliasing I-cache in HS38 */
+ if (op == OP_INV_IC) {
+ s = ARC_REG_IC_IVIR;
+ e = ARC_REG_IC_ENDR;
+ } else {
+ s = ARC_REG_DC_STARTR;
+ e = ARC_REG_DC_ENDR;
+ }
+
+ if (!full_page) {
+ /* for any leading gap between @paddr and start of cache line */
+ sz += paddr & ~CACHE_LINE_MASK;
+ paddr &= CACHE_LINE_MASK;
+
+ /*
+ * account for any trailing gap to end of cache line
+ * this is equivalent to DIV_ROUND_UP() in line ops above
+ */
+ sz += L1_CACHE_BYTES - 1;
+ }
+
+ if (is_pae40_enabled()) {
+ /* TBD: check if crossing 4TB boundary */
+ if (op == OP_INV_IC)
+ write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32);
+ else
+ write_aux_reg(ARC_REG_DC_PTAG_HI, (u64)paddr >> 32);
+ }
+
+ /* ENDR needs to be set ahead of START */
+ write_aux_reg(e, paddr + sz); /* ENDR is exclusive */
+ write_aux_reg(s, paddr);
+
+ /* caller waits on DC_CTRL.FS */
+}
+
+#endif
+
#if (CONFIG_ARC_MMU_VER < 3)
#define __cache_line_loop __cache_line_loop_v2
#elif (CONFIG_ARC_MMU_VER == 3)
@@ -411,6 +463,11 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
* Machine specific helpers for Entire D-Cache or Per Line ops
*/
+#ifndef USE_RGN_FLSH
+/*
+ * this version avoids extra read/write of DC_CTRL for flush or invalid ops
+ * in the non region flush regime (such as for ARCompact)
+ */
static inline void __before_dc_op(const int op)
{
if (op == OP_FLUSH_N_INV) {
@@ -424,6 +481,32 @@ static inline void __before_dc_op(const int op)
}
}
+#else
+
+static inline void __before_dc_op(const int op)
+{
+ const unsigned int ctl = ARC_REG_DC_CTRL;
+ unsigned int val = read_aux_reg(ctl);
+
+ if (op == OP_FLUSH_N_INV) {
+ val |= DC_CTRL_INV_MODE_FLUSH;
+ }
+
+ if (op != OP_INV_IC) {
+ /*
+ * Flush / Invalidate is provided by DC_CTRL.RNG_OP 0 or 1
+ * combined Flush-n-invalidate uses DC_CTRL.IM = 1 set above
+ */
+ val &= ~DC_CTRL_RGN_OP_MSK;
+ if (op & OP_INV)
+ val |= DC_CTRL_RGN_OP_INV;
+ }
+ write_aux_reg(ctl, val);
+}
+
+#endif
+
+
static inline void __after_dc_op(const int op)
{
if (op & OP_FLUSH) {
@@ -486,13 +569,14 @@ static void __dc_enable(void)
static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz, const int op)
{
+ const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
unsigned long flags;
local_irq_save(flags);
__before_dc_op(op);
- __cache_line_loop(paddr, vaddr, sz, op);
+ __cache_line_loop(paddr, vaddr, sz, op, full_page);
__after_dc_op(op);
@@ -521,10 +605,11 @@ static inline void
__ic_line_inv_vaddr_local(phys_addr_t paddr, unsigned long vaddr,
unsigned long sz)
{
+ const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
unsigned long flags;
local_irq_save(flags);
- (*_cache_line_loop_ic_fn)(paddr, vaddr, sz, OP_INV_IC);
+ (*_cache_line_loop_ic_fn)(paddr, vaddr, sz, OP_INV_IC, full_page);
local_irq_restore(flags);
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c6816b..4c1a35f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -359,15 +359,6 @@
select SPARSE_IRQ
select USE_OF
-config ARCH_GEMINI
- bool "Cortina Systems Gemini"
- select CLKSRC_MMIO
- select CPU_FA526
- select GENERIC_CLOCKEVENTS
- select GPIOLIB
- help
- Support for the Cortina Systems Gemini family SoCs
-
config ARCH_EBSA110
bool "EBSA-110"
select ARCH_USES_GETTIMEOFFSET
@@ -819,6 +810,8 @@
source "arch/arm/mach-sti/Kconfig"
+source "arch/arm/mach-stm32/Kconfig"
+
source "arch/arm/mach-s3c24xx/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
@@ -877,28 +870,6 @@
Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
high performance microcontrollers.
-config ARCH_STM32
- bool "STMicrolectronics STM32"
- depends on ARM_SINGLE_ARMV7M
- select ARCH_HAS_RESET_CONTROLLER
- select ARMV7M_SYSTICK
- select CLKSRC_STM32
- select PINCTRL
- select RESET_CONTROLLER
- select STM32_EXTI
- help
- Support for STMicroelectronics STM32 processors.
-
-config MACH_STM32F429
- bool "STMicrolectronics STM32F429"
- depends on ARCH_STM32
- default y
-
-config MACH_STM32F746
- bool "STMicrolectronics STM32F746"
- depends on ARCH_STM32
- default y
-
config ARCH_MPS2
bool "ARM MPS2 platform"
depends on ARM_SINGLE_ARMV7M
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..9c5e1d9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -77,6 +77,7 @@
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-linksys-ea6300-v1.dtb \
bcm4708-luxul-xap-1510.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
@@ -87,17 +88,21 @@
bcm47081-buffalo-wzr-900dhp.dtb \
bcm47081-luxul-xap-1410.dtb \
bcm47081-luxul-xwr-1200.dtb \
+ bcm47081-tplink-archer-c5-v2.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-linksys-ea9200.dtb \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-linksys-panamera.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012er.dtb \
+ bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
bcm47189-tenda-ac9.dtb
@@ -173,6 +178,12 @@
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
+dtb-$(CONFIG_ARCH_GEMINI) += \
+ gemini-nas4220b.dtb \
+ gemini-rut1xx.dtb \
+ gemini-sq201.dtb \
+ gemini-wbd111.dtb \
+ gemini-wbd222.dtb
dtb-$(CONFIG_ARCH_HI3xxx) += \
hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += \
@@ -352,6 +363,8 @@
imx6dl-gw551x.dtb \
imx6dl-gw552x.dtb \
imx6dl-gw553x.dtb \
+ imx6dl-gw5903.dtb \
+ imx6dl-gw5904.dtb \
imx6dl-hummingboard.dtb \
imx6dl-icore.dtb \
imx6dl-icore-rqs.dtb \
@@ -395,9 +408,13 @@
imx6q-gw551x.dtb \
imx6q-gw552x.dtb \
imx6q-gw553x.dtb \
+ imx6q-gw5903.dtb \
+ imx6q-gw5904.dtb \
imx6q-h100.dtb \
imx6q-hummingboard.dtb \
imx6q-icore.dtb \
+ imx6q-icore-ofcap10.dtb \
+ imx6q-icore-ofcap12.dtb \
imx6q-icore-rqs.dtb \
imx6q-marsboard.dtb \
imx6q-mccmon6.dtb \
@@ -425,9 +442,12 @@
imx6q-utilite-pro.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
+ imx6q-zii-rdu2.dtb \
imx6qp-nitrogen6_max.dtb \
+ imx6qp-nitrogen6_som2.dtb \
imx6qp-sabreauto.dtb \
- imx6qp-sabresd.dtb
+ imx6qp-sabresd.dtb \
+ imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
@@ -458,6 +478,7 @@
imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb \
+ imx7d-sdb-sht11.dtb \
imx7s-colibri-eval-v3.dtb \
imx7s-warp.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
@@ -488,6 +509,10 @@
imx28-cfa10056.dtb \
imx28-cfa10057.dtb \
imx28-cfa10058.dtb \
+ imx28-duckbill-2-485.dtb \
+ imx28-duckbill-2.dtb \
+ imx28-duckbill-2-enocean.dtb \
+ imx28-duckbill-2-spi.dtb \
imx28-duckbill.dtb \
imx28-eukrea-mbmx283lc.dtb \
imx28-eukrea-mbmx287lc.dtb \
@@ -673,6 +698,25 @@
arm-realview-eb-a9mp-bbrevd.dtb \
arm-realview-pba8.dtb \
arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_RENESAS) += \
+ emev2-kzm9d.dtb \
+ r7s72100-genmai.dtb \
+ r7s72100-rskrza1.dtb \
+ r8a73a4-ape6evm.dtb \
+ r8a7740-armadillo800eva.dtb \
+ r8a7743-sk-rzg1m.dtb \
+ r8a7745-sk-rzg1e.dtb \
+ r8a7778-bockw.dtb \
+ r8a7779-marzen.dtb \
+ r8a7790-lager.dtb \
+ r8a7791-koelsch.dtb \
+ r8a7791-porter.dtb \
+ r8a7792-blanche.dtb \
+ r8a7792-wheat.dtb \
+ r8a7793-gose.dtb \
+ r8a7794-alt.dtb \
+ r8a7794-silk.dtb \
+ sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk1108-evb.dtb \
rk3036-evb.dtb \
@@ -692,9 +736,11 @@
rk3288-firefly.dtb \
rk3288-firefly-reload.dtb \
rk3288-miqi.dtb \
+ rk3288-phycore-rdk.dtb \
rk3288-popmetal.dtb \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
+ rk3288-tinker.dtb \
rk3288-veyron-brain.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
@@ -713,25 +759,6 @@
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
- emev2-kzm9d.dtb \
- r7s72100-genmai.dtb \
- r7s72100-rskrza1.dtb \
- r8a73a4-ape6evm.dtb \
- r8a7740-armadillo800eva.dtb \
- r8a7743-sk-rzg1m.dtb \
- r8a7745-sk-rzg1e.dtb \
- r8a7778-bockw.dtb \
- r8a7779-marzen.dtb \
- r8a7790-lager.dtb \
- r8a7791-koelsch.dtb \
- r8a7791-porter.dtb \
- r8a7792-blanche.dtb \
- r8a7792-wheat.dtb \
- r8a7793-gose.dtb \
- r8a7794-alt.dtb \
- r8a7794-silk.dtb \
- sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_nand.dtb \
@@ -764,7 +791,8 @@
stm32f429-disco.dtb \
stm32f469-disco.dtb \
stm32429i-eval.dtb \
- stm32746g-eval.dtb
+ stm32746g-eval.dtb \
+ stm32h743i-eval.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
@@ -868,6 +896,7 @@
sun8i-h3-beelink-x2.dtb \
sun8i-h3-nanopi-m1.dtb \
sun8i-h3-nanopi-neo.dtb \
+ sun8i-h3-nanopi-neo-air.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \
sun8i-h3-orangepi-one.dtb \
@@ -970,6 +999,8 @@
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
+ armada-385-linksys-shelby.dtb \
+ armada-385-synology-ds116.dtb \
armada-385-turris-omnia.dtb \
armada-388-clearfog.dtb \
armada-388-clearfog-base.dtb \
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
index d0eefc3..731df7a 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -41,28 +41,28 @@
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0>;
- clock-frequency = <0>; /* Filled by loader */
+ clock-frequency = <1700000000>;
};
cpu@1 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <1>;
- clock-frequency = <0>; /* Filled by loader */
+ clock-frequency = <1700000000>;
};
cpu@2 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <2>;
- clock-frequency = <0>; /* Filled by loader */
+ clock-frequency = <1700000000>;
};
cpu@3 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <3>;
- clock-frequency = <0>; /* Filled by loader */
+ clock-frequency = <1700000000>;
};
};
@@ -81,7 +81,7 @@
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- clock-frequency = <0>; /* Filled by loader */
+ clock-frequency = <50000000>;
};
/* Interrupt Controller */
@@ -120,26 +120,26 @@
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
- uart0:uart@fd883000 {
+ uart0: uart@fd883000 {
compatible = "ns16550a";
reg = <0x0 0xfd883000 0x0 0x1000>;
- clock-frequency = <0>; /* Filled by loader */
+ clock-frequency = <375000000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
};
- uart1:uart@0xfd884000 {
+ uart1: uart@fd884000 {
compatible = "ns16550a";
reg = <0x0 0xfd884000 0x0 0x1000>;
- clock-frequency = <0>; /* Filled by loader */
+ clock-frequency = <375000000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
};
/* Internal PCIe Controller */
- pcie-internal@0xfbc00000 {
+ pcie@fbc00000 {
compatible = "pci-host-ecam-generic";
device_type = "pci";
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 501c752..75de1e7 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
/ {
model = "OnRISC Baltos iR 2110";
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index 19f53b8..46df1b2 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
/ {
model = "OnRISC Baltos iR 3220";
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 2b9d7f4..5d56355 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
/ {
model = "OnRISC Baltos iR 5221";
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
new file mode 100644
index 0000000..3ab1767
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/*#include "am33xx.dtsi"*/
+
+/ {
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds>;
+
+ compatible = "gpio-leds";
+
+ power {
+ label = "onrisc:red:power";
+ linux,default-trigger = "default-on";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ wlan {
+ label = "onrisc:blue:wlan";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ app {
+ label = "onrisc:green:app";
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ user_leds: pinmux_user_leds {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 77273df..935ed17 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -15,3 +15,14 @@
model = "TI AM335x BeagleBone Black";
compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
};
+
+&cpu0_opp_table {
+ /*
+ * All PG 2.0 silicon may not support 1GHz but some of the early
+ * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+ * to support 1GHz OPP so enable it for PG 2.0 on this board.
+ */
+ oppnitro@1000000000 {
+ opp-supported-hw = <0x06 0x0100>;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index a2ad076..f2005ec 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -201,6 +201,69 @@
AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
>;
};
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1, RMII mode */
+ AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0)) /* rmii1_refclk.rmii1_refclk */
+ AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txen.rmii1_txen */
+ /* Slave 2, RMII mode */
+ AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wait0.rmii2_crs_dv */
+ AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_col.rmii2_refclk */
+ AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a11.rmii2_rxd0 */
+ AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a10.rmii2_rxd1 */
+ AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wpn.rmii2_rxerr */
+ AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a5.rmii2_txd0 */
+ AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a4.rmii2_txd1 */
+ AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a0.rmii2_txen */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+
+ /* Slave 2 reset value */
+ AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0)) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+ >;
+ };
};
&i2c0 {
@@ -245,6 +308,39 @@
spi-max-frequency = <1000000>;
spi-cpol;
};
+
+ spi_nor: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q64", "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot";
+ reg = <0x80000 0x100000>;
+ read-only;
+ };
+
+ partition@2 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>;
+ read-only;
+ };
+
+ partition@3 {
+ label = "misc";
+ reg = <0x1A0000 0x660000>;
+ };
+ };
+
};
&tscadc {
@@ -350,3 +446,61 @@
pinctrl-0 = <&uart3_pins_default>;
status = "okay";
};
+
+&gpio3 {
+ p4 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PR1_MII_CTRL";
+ };
+
+ p10 {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ /* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
+ output-high;
+ line-name = "MUX_MII_CTL1";
+ };
+};
+
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+ dual_emac;
+};
+
+&phy_sel {
+ rmii-clock-ext;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2>; /* PHY datasheet states 1uS min */
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 9e96d60..9e24294 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -46,19 +46,7 @@
device_type = "cpu";
reg = <0>;
- /*
- * To consider voltage drop between PMIC and SoC,
- * tolerance value is reduced to 2% from 4% and
- * voltage value is increased as a precaution.
- */
- operating-points = <
- /* kHz uV */
- 720000 1285000
- 600000 1225000
- 500000 1125000
- 275000 1125000
- >;
- voltage-tolerance = <2>; /* 2 percentage */
+ operating-points-v2 = <&cpu0_opp_table>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
@@ -67,6 +55,79 @@
};
};
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+
+ /*
+ * The three following nodes are marked with opp-suspend
+ * because the can not be enabled simultaneously on a
+ * single SoC.
+ */
+ opp50@300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <950000 931000 969000>;
+ opp-supported-hw = <0x06 0x0010>;
+ opp-suspend;
+ };
+
+ opp100@275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x01 0x00FF>;
+ opp-suspend;
+ };
+
+ opp100@300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x06 0x0020>;
+ opp-suspend;
+ };
+
+ opp100@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp100@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x06 0x0040>;
+ };
+
+ opp120@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp120@720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0x06 0x0080>;
+ };
+
+ oppturbo@720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ oppturbo@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0x06 0x0100>;
+ };
+
+ oppnitro@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1325000 1298500 1351500>;
+ opp-supported-hw = <0x04 0x0200>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 9fe545d..00da3f2 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -13,6 +13,7 @@
/ {
aliases {
serial3 = &uart4;
+ can = &hecc;
};
ocp@68000000 {
@@ -72,6 +73,17 @@
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
+
+ hecc: can@5c050000 {
+ compatible = "ti,am3517-hecc";
+ status = "disabled";
+ reg = <0x5c050000 0x80>,
+ <0x5c053000 0x180>,
+ <0x5c052000 0x200>;
+ reg-names = "hecc", "hecc-ram", "mbx";
+ interrupts = <24>;
+ clocks = <&hecc_ck>;
+ };
};
};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 97fcaf4..176e09e 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -50,15 +50,14 @@
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
- ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
- ti,syscon-rev = <&scm_conf 0x600>;
clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
- cpu0_opp_table: opp_table0 {
- compatible = "operating-points-v2";
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
opp50@300000000 {
opp-hz = /bits/ 64 <300000000>;
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index a4f3173..397e98b 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -501,6 +501,21 @@
AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
>;
};
+
+ uart0_pins_default: uart0_pins_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+ AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_default>;
};
&i2c0 {
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index e5ac1d8..c536b2f5 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -101,6 +101,22 @@
};
};
+&dra7_pmx_core {
+ dcan1_pins_default: dcan1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */
+ >;
+ };
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -391,6 +407,14 @@
max-frequency = <96000000>;
};
+&dcan1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
+};
+
&qspi {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
new file mode 100644
index 0000000..c7a8ddd
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT1900ACS";
+ compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs{
+ i2c@11000 {
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan_amber@0 {
+ label = "shelby:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "shelby:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g@2 {
+ label = "shelby:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g@3 {
+ label = "shelby:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2@5 {
+ label = "shelby:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "shelby:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "shelby:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "shelby:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "shelby:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "shelby:white:power";
+ };
+
+ sata {
+ label = "shelby:white:sata";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index df47bf1..2306c45 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -59,7 +59,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
i2c@11000 {
@@ -88,6 +89,9 @@
ethernet@70000 {
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -97,6 +101,9 @@
ethernet@34000 {
status = "okay";
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -159,6 +166,10 @@
status = "okay";
};
+ bm@c8000 {
+ status = "okay";
+ };
+
/* USB part of the eSATA/USB 2.0 port */
usb@58000 {
status = "okay";
@@ -241,6 +252,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
@@ -305,6 +320,7 @@
sata {
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
+ linux,default-trigger = "disk-activity";
};
};
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
new file mode 100644
index 0000000..31510eb
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -0,0 +1,321 @@
+/*
+ * Device Tree file for Synology DS116 NAS
+ *
+ * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Synology DS116";
+ compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+ i2c@11000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+ };
+
+ serial@12000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+ };
+
+ serial@12100 {
+ /* A PIC16F1829 is connected to uart1 at 9600 bps,
+ * and takes single-character orders :
+ * "1" : power off // already handled by the poweroff node
+ * "2" : short beep
+ * "3" : long beep
+ * "4" : turn the power LED ON
+ * "5" : flash the power LED
+ * "6" : turn the power LED OFF
+ * "7" : turn the status LED OFF
+ * "8" : turn the status LED ON
+ * "9" : flash the status LED
+ * "A" : flash the motherboard LED (D8)
+ * "B" : turn the motherboard LED OFF
+ * "C" : hard reset
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&coreclk 0>;
+ };
+
+ ethernet@70000 {
+ pinctrl-names = "default";
+ phy = <&phy0>;
+ phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ status = "okay";
+ };
+
+
+ mdio@72004 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ sata@a8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sata0_pins>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ target-supply = <®_5v_sata0>;
+ };
+ };
+
+ bm@c8000 {
+ status = "okay";
+ };
+
+ usb3@f0000 {
+ usb-phy = <&usb3_0_phy>;
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ usb-phy = <&usb3_1_phy>;
+ status = "okay";
+ };
+ };
+
+ bm-bppi {
+ status = "okay";
+ };
+
+ gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
+ <&gpio1 17 GPIO_ACTIVE_HIGH>,
+ <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 1500 1
+ 2500 2
+ 3000 3
+ 3400 4
+ 3700 5
+ 3900 6
+ 4000 7>;
+ cooling-cells = <2>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ /* The green part is on gpio0.20 which is also used by
+ * sata0, and accesses to SATA disk 0 make it blink so it
+ * doesn't need to be declared here.
+ */
+ orange {
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ label = "ds116:orange:disk";
+ default-state = "off";
+ };
+ };
+ };
+
+ usb3_0_phy: usb3_0_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_usb3_0_vbus>;
+ };
+
+ usb3_1_phy: usb3_1_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_usb3_1_vbus>;
+ };
+
+ reg_usb3_0_vbus: usb3-vbus0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&xhci0_vbus_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usb3_1_vbus: usb3-vbus1 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&xhci1_vbus_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_sata0: pwr-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "pwr_en_sata0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v_sata0: v5-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_sata0>;
+ };
+
+ reg_12v_sata0: v12-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <®_sata0>;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "macronix,mx25l6405d", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ /* Note: there is a redboot partition table despite u-boot
+ * being used. The names presented here are the same as those
+ * found in the FIS directory. There is also a small device
+ * tree in the last 64kB of the RedBoot partition which is not
+ * enumerated. The MAC address and the serial number are listed
+ * in the "vendor" partition.
+ */
+ partition@00000000 {
+ label = "RedBoot";
+ reg = <0x00000000 0x000f0000>;
+ read-only;
+ };
+
+ partition@000c0000 {
+ label = "zImage";
+ reg = <0x000f0000 0x002d0000>;
+ };
+
+ partition@00390000 {
+ label = "rd.gz";
+ reg = <0x003c0000 0x00410000>;
+ };
+
+ partition@007d0000 {
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>;
+ read-only;
+ };
+
+ partition@007e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>;
+ read-only;
+ };
+
+ partition@007f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>;
+ read-only;
+ };
+ };
+};
+
+&pinctrl {
+ /* use only one pin for UART1, as mpp20 is used by sata0 */
+ uart1_pins: uart-pins-1 {
+ marvell,pins = "mpp19";
+ marvell,function = "ua1";
+ };
+
+ xhci0_vbus_pins: xhci0_vbus_pins {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+ xhci1_vbus_pins: xhci1_vbus_pins {
+ marvell,pins = "mpp59";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index 8e63be3..7fcc4c4 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -70,13 +70,7 @@
};
soc {
- internal-regs {
- pinctrl@18000 {
- compatible = "marvell,mv88f6820-pinctrl";
- };
- };
-
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -106,7 +100,7 @@
* configured in x4 by the bootloader, then
* pcie@4,0 is not available.
*/
- pcie@1,0 {
+ pcie1: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -124,7 +118,7 @@
};
/* x1 port */
- pcie@2,0 {
+ pcie2: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -142,7 +136,7 @@
};
/* x1 port */
- pcie@3,0 {
+ pcie3: pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
@@ -163,7 +157,7 @@
* x1 port only available when pcie@1,0 is
* configured as a x1 port
*/
- pcie@4,0 {
+ pcie4: pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
@@ -182,3 +176,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 2745b74..0d5f1f0 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -186,25 +186,6 @@
};
};
-&pinctrl {
- clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
- marvell,pins = "mpp46";
- marvell,function = "ref";
- };
- clearfog_dsa0_pins: clearfog-dsa0-pins {
- marvell,pins = "mpp23", "mpp41";
- marvell,function = "gpio";
- };
- clearfog_spi1_cs_pins: spi1-cs-pins {
- marvell,pins = "mpp55";
- marvell,function = "spi1";
- };
- rear_button_pins: rear-button-pins {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-};
-
&mdio {
status = "okay";
@@ -268,6 +249,25 @@
};
};
+&pinctrl {
+ clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+ marvell,pins = "mpp46";
+ marvell,function = "ref";
+ };
+ clearfog_dsa0_pins: clearfog-dsa0-pins {
+ marvell,pins = "mpp23", "mpp41";
+ marvell,function = "gpio";
+ };
+ clearfog_spi1_cs_pins: spi1-cs-pins {
+ marvell,pins = "mpp55";
+ marvell,function = "spi1";
+ };
+ rear_button_pins: rear-button-pins {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+};
+
&spi1 {
/*
* Add SPI CS pins for clearfog:
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi
index 564fa59..1c0d151 100644
--- a/arch/arm/boot/dts/armada-388.dtsi
+++ b/arch/arm/boot/dts/armada-388.dtsi
@@ -50,13 +50,8 @@
model = "Marvell Armada 388 family SoC";
compatible = "marvell,armada388", "marvell,armada385",
"marvell,armada380";
-
soc {
internal-regs {
- pinctrl@18000 {
- compatible = "marvell,mv88f6828-pinctrl";
- };
-
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
@@ -68,3 +63,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6828-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 79b7675..8b165c3 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -82,7 +82,7 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
};
- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -92,7 +92,7 @@
status = "disabled";
};
- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -102,7 +102,7 @@
status = "disabled";
};
- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -112,7 +112,7 @@
status = "disabled";
};
- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -122,7 +122,7 @@
status = "disabled";
};
- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -339,7 +339,7 @@
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
- system-controller@18200 {
+ systemc: system-controller@18200 {
compatible = "marvell,armada-380-system-controller",
"marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
@@ -360,7 +360,8 @@
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
- reg = <0x20000 0x100>, <0x20180 0x20>;
+ reg = <0x20000 0x100>, <0x20180 0x20>,
+ <0x20250 0x8>;
};
mpic: interrupt-controller@20a00 {
@@ -373,7 +374,7 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
- timer@20300 {
+ timer: timer@20300 {
compatible = "marvell,armada-380-timer",
"marvell,armada-xp-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
@@ -387,14 +388,14 @@
clock-names = "nbclk", "fixed";
};
- watchdog@20300 {
+ watchdog: watchdog@20300 {
compatible = "marvell,armada-380-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
clocks = <&coreclk 2>, <&refclk>;
clock-names = "nbclk", "fixed";
};
- cpurst@20800 {
+ cpurst: cpurst@20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
@@ -404,12 +405,12 @@
reg = <0x20d20 0x6c>;
};
- coherency-fabric@21010 {
+ coherencyfab: coherency-fabric@21010 {
compatible = "marvell,armada-380-coherency-fabric";
reg = <0x21010 0x1c>;
};
- pmsu@22000 {
+ pmsu: pmsu@22000 {
compatible = "marvell,armada-380-pmsu";
reg = <0x22000 0x1000>;
};
@@ -451,7 +452,7 @@
status = "disabled";
};
- usb@58000 {
+ usb0: usb@58000 {
compatible = "marvell,orion-ehci";
reg = <0x58000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -459,7 +460,7 @@
status = "disabled";
};
- xor@60800 {
+ xor0: xor@60800 {
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60800 0x100
0x60a00 0x100>;
@@ -479,7 +480,7 @@
};
};
- xor@60900 {
+ xor1: xor@60900 {
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -507,7 +508,7 @@
clocks = <&gateclk 4>;
};
- crypto@90000 {
+ cesa: crypto@90000 {
compatible = "marvell,armada-38x-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
@@ -522,14 +523,14 @@
marvell,crypto-sram-size = <0x800>;
};
- rtc@a3800 {
+ rtc: rtc@a3800 {
compatible = "marvell,armada-380-rtc";
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
reg-names = "rtc", "rtc-soc";
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
- sata@a8000 {
+ ahci0: sata@a8000 {
compatible = "marvell,armada-380-ahci";
reg = <0xa8000 0x2000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -545,7 +546,7 @@
status = "disabled";
};
- sata@e0000 {
+ ahci1: sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -561,13 +562,13 @@
clock-output-names = "nand";
};
- thermal@e8078 {
+ thermal: thermal@e8078 {
compatible = "marvell,armada380-thermal";
reg = <0xe4078 0x4>, <0xe4074 0x4>;
status = "okay";
};
- flash@d0000 {
+ nand: flash@d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
@@ -577,7 +578,7 @@
status = "disabled";
};
- sdhci@d8000 {
+ sdhci: sdhci@d8000 {
compatible = "marvell,armada-380-sdhci";
reg-names = "sdhci", "mbus", "conf-sdio3";
reg = <0xd8000 0x1000>,
@@ -589,7 +590,7 @@
status = "disabled";
};
- usb3@f0000 {
+ usb3_0: usb3@f0000 {
compatible = "marvell,armada-380-xhci";
reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -597,7 +598,7 @@
status = "disabled";
};
- usb3@f8000 {
+ usb3_1: usb3@f8000 {
compatible = "marvell,armada-380-xhci";
reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index f6a03dc..84cc232 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -45,11 +45,14 @@
* common to all Armada XP SoCs.
*/
-#include "armada-xp.dtsi"
+#include "armada-370-xp.dtsi"
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
model = "Marvell 98DX3236 SoC";
- compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+ compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
aliases {
gpio0 = &gpio0;
@@ -72,12 +75,19 @@
};
soc {
+ compatible = "marvell,armadaxp-mbus", "simple-bus";
+
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+ };
+
/*
* 98DX3236 has 1 x1 PCIe unit Gen2.0
*/
@@ -95,8 +105,7 @@
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
- 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
- 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
pcie1: pcie@1,0 {
device_type = "pci";
@@ -117,48 +126,18 @@
};
internal-regs {
- coreclk: mvebu-sar@18230 {
- compatible = "marvell,mv98dx3236-core-clock";
+ sdramc@1400 {
+ compatible = "marvell,armada-xp-sdram-controller";
+ reg = <0x1400 0x500>;
};
- cpuclk: clock-complex@18700 {
- compatible = "marvell,mv98dx3236-cpu-clock";
- };
-
- corediv-clock@18740 {
- status = "disabled";
- };
-
- xor@60900 {
- status = "disabled";
- };
-
- crypto@90000 {
- status = "disabled";
- };
-
- xor@f0900 {
- status = "disabled";
- };
-
- xor@f0800 {
- compatible = "marvell,orion-xor";
- reg = <0xf0800 0x100
- 0xf0a00 0x100>;
- clocks = <&gateclk 22>;
- status = "okay";
-
- xor10 {
- interrupts = <51>;
- dmacap,memcpy;
- dmacap,xor;
- };
- xor11 {
- interrupts = <52>;
- dmacap,memcpy;
- dmacap,xor;
- dmacap,memset;
- };
+ L2: l2-cache@8000 {
+ compatible = "marvell,aurora-system-cache";
+ reg = <0x08000 0x1000>;
+ cache-id-part = <0x100>;
+ cache-level = <2>;
+ cache-unified;
+ wt-override;
};
gpio0: gpio@18100 {
@@ -190,16 +169,99 @@
interrupts = <87>;
};
+ systemc: system-controller@18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x500>;
+ };
+
+ gateclk: clock-gating-control@18220 {
+ compatible = "marvell,mv98dx3236-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
+ };
+
+ cpuclk: clock-complex@18700 {
+ #clock-cells = <1>;
+ compatible = "marvell,mv98dx3236-cpu-clock";
+ reg = <0x18700 0x24>, <0x1c054 0x10>;
+ clocks = <&coreclk 1>;
+ };
+
+ corediv-clock@18740 {
+ status = "disabled";
+ };
+
+ cpu-config@21000 {
+ compatible = "marvell,armada-xp-cpu-config";
+ reg = <0x21000 0x8>;
+ };
+
+ ethernet@70000 {
+ compatible = "marvell,armada-xp-neta";
+ };
+
+ ethernet@74000 {
+ compatible = "marvell,armada-xp-neta";
+ };
+
+ xor1: xor@f0800 {
+ compatible = "marvell,orion-xor";
+ reg = <0xf0800 0x100
+ 0xf0a00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <51>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <52>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
nand: nand@d0000 {
clocks = <&dfx_coredivclk 0>;
};
+
+ xor0: xor@f0900 {
+ compatible = "marvell,orion-xor";
+ reg = <0xF0900 0x100
+ 0xF0B00 0x100>;
+ clocks = <&gateclk 28>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <94>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <95>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
};
- dfxr: dfx-registers@ac000000 {
- compatible = "simple-bus";
+ dfx: dfx-server@ac000000 {
+ compatible = "marvell,dfx-server", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+ reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+ coreclk: mvebu-sar@f8204 {
+ compatible = "marvell,mv98dx3236-core-clock";
+ reg = <0xf8204 0x4>;
+ #clock-cells = <1>;
+ };
dfx_coredivclk: corediv-clock@f8268 {
compatible = "marvell,mv98dx3236-corediv-clock";
@@ -208,11 +270,6 @@
clocks = <&mainpll>;
clock-output-names = "nand";
};
-
- dfx: dfx@0 {
- compatible = "marvell,dfx-server";
- reg = <0 0x100000>;
- };
};
switch: switch@a8000000 {
@@ -229,6 +286,53 @@
};
};
};
+
+ clocks {
+ /* 25 MHz reference crystal */
+ refclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+ };
+};
+
+&i2c0 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x100>;
+};
+
+&mpic {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+ compatible = "marvell,armada-xp-timer";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+ compatible = "marvell,armada-xp-wdt";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+ reg = <0x20800 0x20>;
+};
+
+&usb0 {
+ clocks = <&gateclk 18>;
+};
+
+&usb1 {
+ clocks = <&gateclk 19>;
};
&pinctrl {
@@ -241,14 +345,13 @@
};
};
+&spi0 {
+ compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+};
+
&sdio {
status = "disabled";
};
-&crypto_sram0 {
- status = "disabled";
-};
-
-&crypto_sram1 {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
index e1580af..a0d81bd 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
@@ -49,7 +49,7 @@
/ {
model = "Marvell 98DX3336 SoC";
- compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+ compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
cpus {
cpu@1 {
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
index b9d9b26..51de91b 100644
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -49,7 +49,7 @@
/ {
model = "Marvell 98DX4251 SoC";
- compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+ compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
cpus {
cpu@1 {
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
index a813080..1b1ff17 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -58,7 +58,7 @@
/ {
model = "Marvell Bobcat2 Evaluation Board";
- compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp";
+ compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
index 4e07cb6..06fce35 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -58,7 +58,7 @@
/ {
model = "DB-XC3-24G4XG";
- compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp";
+ compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 42ea876..9efcf59 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -71,7 +71,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
internal-regs {
@@ -95,6 +96,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -106,6 +110,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -156,6 +163,7 @@
esata@4 {
label = "mamba:white:esata";
reg = <0x4>;
+ linux,default-trigger = "disk-activity";
};
usb2@5 {
@@ -185,6 +193,10 @@
};
};
+ bm@c8000 {
+ status = "okay";
+ };
+
nand@d0000 {
status = "okay";
num-cs = <1>;
@@ -258,6 +270,10 @@
};
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
gpio_keys {
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index d967603..7c90dac 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -20,6 +20,28 @@
};
};
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ };
+};
+
+&spi1 {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&spi2 {
+ status = "okay";
+};
+
&uart5 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index 1d2fc1e..1125517 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -31,6 +31,24 @@
};
};
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ };
+};
+
+&spi {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
&uart5 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 7a3b2b5..1190fec1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -31,6 +31,42 @@
};
};
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
&uart5 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index c79c937..8c6bc29 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -18,21 +18,41 @@
};
};
- clocks {
- clk_clkin: clk_clkin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- };
-
- };
-
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ fmc: flash-controller@1e620000 {
+ reg = < 0x1e620000 0x94
+ 0x20000000 0x02000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2400-fmc";
+ status = "disabled";
+ interrupts = <19>;
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ };
+
+ spi: flash-controller@1e630000 {
+ reg = < 0x1e630000 0x18
+ 0x30000000 0x02000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2400-spi";
+ status = "disabled";
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ };
+
vic: interrupt-controller@1e6c0080 {
compatible = "aspeed,ast2400-vic";
interrupt-controller;
@@ -61,16 +81,48 @@
#size-cells = <1>;
ranges;
- clk_hpll: clk_hpll@1e6e2070 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-hpll-clock";
- reg = <0x1e6e2070 0x4>;
- clocks = <&clk_clkin>;
- };
-
syscon: syscon@1e6e2000 {
compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk_clkin: clk_clkin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ };
+
+ clk_hpll: clk_hpll@70 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g4-hpll-clock", "fixed-clock";
+ reg = <0x70>;
+ clocks = <&clk_clkin>;
+ clock-frequency = <384000000>;
+ };
+
+ clk_ahb: clk_ahb@70 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g4-ahb-clock", "fixed-clock";
+ reg = <0x70>;
+ clocks = <&clk_hpll>;
+ clock-frequency = <192000000>;
+ };
+
+ clk_apb: clk_apb@08 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g4-apb-clock", "fixed-clock";
+ reg = <0x08>;
+ clocks = <&clk_hpll>;
+ clock-frequency = <48000000>;
+ };
+
+ clk_uart: clk_uart@2c{
+ #clock-cells = <0>;
+ compatible = "aspeed,g4-uart-clock", "fixed-clock";
+ reg = <0x2c>;
+ clock-frequency = <24000000>;
+ };
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
@@ -818,19 +870,6 @@
};
};
- clk_apb: clk_apb@1e6e2008 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-apb-clock";
- reg = <0x1e6e2008 0x4>;
- clocks = <&clk_hpll>;
- };
-
- clk_uart: clk_uart@1e6e2008 {
- #clock-cells = <0>;
- compatible = "aspeed,uart-clock";
- reg = <0x1e6e202c 0x4>;
- };
-
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x8000>; // 32K
@@ -857,13 +896,13 @@
};
wdt1: wdt@1e785000 {
- compatible = "aspeed,wdt";
+ compatible = "aspeed,ast2400-wdt";
reg = <0x1e785000 0x1c>;
interrupts = <27>;
};
wdt2: wdt@1e785020 {
- compatible = "aspeed,wdt";
+ compatible = "aspeed,ast2400-wdt";
reg = <0x1e785020 0x1c>;
interrupts = <27>;
clocks = <&clk_apb>;
@@ -930,6 +969,14 @@
no-loopback-test;
status = "disabled";
};
+
+ adc: adc@1e6e9000 {
+ compatible = "aspeed,ast2400-adc";
+ reg = <0x1e6e9000 0xb0>;
+ clocks = <&clk_apb>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index b659663..a0bea4a 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -24,6 +24,69 @@
#size-cells = <1>;
ranges;
+ fmc: flash-controller@1e620000 {
+ reg = < 0x1e620000 0xc4
+ 0x20000000 0x10000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2500-fmc";
+ status = "disabled";
+ interrupts = <19>;
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@1 {
+ reg = < 1 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@2 {
+ reg = < 2 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ };
+
+ spi1: flash-controller@1e630000 {
+ reg = < 0x1e630000 0xc4
+ 0x30000000 0x08000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2500-spi";
+ status = "disabled";
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@1 {
+ reg = < 1 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ };
+
+ spi2: flash-controller@1e631000 {
+ reg = < 0x1e631000 0xc4
+ 0x38000000 0x08000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2500-spi";
+ status = "disabled";
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@1 {
+ reg = < 1 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ };
+
vic: interrupt-controller@1e6c0080 {
compatible = "aspeed,ast2400-vic";
interrupt-controller;
@@ -52,15 +115,49 @@
#size-cells = <1>;
ranges;
- clk_clkin: clk_clkin@1e6e2070 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-clkin-clock";
- reg = <0x1e6e2070 0x04>;
- };
-
syscon: syscon@1e6e2000 {
compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk_clkin: clk_clkin@70 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g5-clkin-clock", "fixed-clock";
+ reg = <0x70>;
+ clock-frequency = <24000000>;
+ };
+
+ clk_hpll: clk_hpll@24 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g5-hpll-clock", "fixed-clock";
+ reg = <0x24>;
+ clocks = <&clk_clkin>;
+ clock-frequency = <792000000>;
+ };
+
+ clk_ahb: clk_ahb@70 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g5-ahb-clock", "fixed-clock";
+ reg = <0x70>;
+ clocks = <&clk_hpll>;
+ clock-frequency = <198000000>;
+ };
+
+ clk_apb: clk_apb@08 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g5-apb-clock", "fixed-clock";
+ reg = <0x08>;
+ clocks = <&clk_hpll>;
+ clock-frequency = <24750000>;
+ };
+
+ clk_uart: clk_uart@2c {
+ #clock-cells = <0>;
+ compatible = "aspeed,uart-clock", "fixed-clock";
+ reg = <0x2c>;
+ clock-frequency = <24000000>;
+ };
pinctrl: pinctrl {
compatible = "aspeed,g5-pinctrl";
@@ -285,7 +382,6 @@
function = "LAD0";
groups = "LAD0";
};
-
pinctrl_lad1_default: lad1_default {
function = "LAD1";
groups = "LAD1";
@@ -872,33 +968,7 @@
};
};
- };
- clk_hpll: clk_hpll@1e6e2024 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-hpll-clock";
- reg = <0x1e6e2024 0x4>;
- clocks = <&clk_clkin>;
- };
-
- clk_ahb: clk_ahb@1e6e2070 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-ahb-clock";
- reg = <0x1e6e2070 0x4>;
- clocks = <&clk_hpll>;
- };
-
- clk_apb: clk_apb@1e6e2008 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-apb-clock";
- reg = <0x1e6e2008 0x4>;
- clocks = <&clk_hpll>;
- };
-
- clk_uart: clk_uart@1e6e2008 {
- #clock-cells = <0>;
- compatible = "aspeed,uart-clock";
- reg = <0x1e6e202c 0x4>;
};
gfx: display@1e6e6000 {
@@ -934,21 +1004,21 @@
wdt1: wdt@1e785000 {
- compatible = "aspeed,wdt";
- reg = <0x1e785000 0x1c>;
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785000 0x20>;
interrupts = <27>;
};
wdt2: wdt@1e785020 {
- compatible = "aspeed,wdt";
- reg = <0x1e785020 0x1c>;
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785020 0x20>;
interrupts = <27>;
status = "disabled";
};
wdt3: wdt@1e785040 {
- compatible = "aspeed,wdt";
- reg = <0x1e785074 0x1c>;
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785040 0x20>;
status = "disabled";
};
@@ -1042,6 +1112,14 @@
no-loopback-test;
status = "disabled";
};
+
+ adc: adc@1e6e9000 {
+ compatible = "aspeed,ast2500-adc";
+ reg = <0x1e6e9000 0xb0>;
+ clocks = <&clk_apb>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 9f7f8a7..0bef9e0 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -246,6 +246,7 @@
shdwc@f8048010 {
atmel,shdwc-debouncer = <976>;
+ atmel,wakeup-rtc-timer;
input@0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index c51fc65..5a53fcf 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -162,9 +162,10 @@
};
adc0: adc@f8018000 {
+ atmel,adc-vref = <3300>;
+ atmel,adc-channels-used = <0xfe>;
pinctrl-0 = <
&pinctrl_adc0_adtrg
- &pinctrl_adc0_ad0
&pinctrl_adc0_ad1
&pinctrl_adc0_ad2
&pinctrl_adc0_ad3
@@ -172,8 +173,6 @@
&pinctrl_adc0_ad5
&pinctrl_adc0_ad6
&pinctrl_adc0_ad7
- &pinctrl_adc0_ad8
- &pinctrl_adc0_ad9
>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 669a2c6..498fba3 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -86,16 +86,43 @@
#io-channel-cells = <1>;
};
- envelope-detector {
+ env_det: envelope-detector {
compatible = "axentia,tse850-envelope-detector";
io-channels = <&dac 0>;
io-channel-names = "dac";
+ #io-channel-cells = <1>;
interrupt-parent = <&pioA>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "comp";
};
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>,
+ <&pioA 2 GPIO_ACTIVE_HIGH>;
+ idle-state = <0>;
+ };
+
+ envelope-detector-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&env_det 0>;
+ io-channel-names = "parent";
+
+ mux-controls = <&mux>;
+
+ channels = "", "",
+ "sync-1",
+ "in",
+ "out",
+ "sync-2",
+ "sys-reg",
+ "ana-reg";
+ };
+
leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 3fe77c3..7e80acd 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -263,7 +263,7 @@
};
matrix: matrix@ffffee00 {
- compatible = "atmel,at91sam9260-bus-matrix", "syscon";
+ compatible = "atmel,at91sam9261-matrix", "syscon";
reg = <0xffffee00 0x200>;
};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 696b8ba..9d2bbc4 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -116,7 +116,7 @@
};
spi0: spi@f0000000 {
- status = "okay";
+ status = "disabled"; /* conflicts with mmc1 */
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
m25p80@0 {
compatible = "atmel,at25df321a";
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 675bb0f..9677dd5 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -53,6 +53,11 @@
interrupt-controller;
#interrupt-cells = <1>;
+ ac_power_supply: ac-power-supply {
+ compatible = "x-powers,axp202-ac-power-supply";
+ status = "disabled";
+ };
+
axp_gpio: gpio {
compatible = "x-powers,axp209-gpio";
gpio-controller;
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
index 458b668..67331c5 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -52,6 +52,11 @@
interrupt-controller;
#interrupt-cells = <1>;
+ ac_power_supply: ac-power-supply {
+ compatible = "x-powers,axp221-ac-power-supply";
+ status = "disabled";
+ };
+
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 8833a4c..9644fdd 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -205,7 +205,7 @@
status = "disabled";
msi-parent = <&msi0>;
- msi0: msi@18012000 {
+ msi0: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
@@ -240,7 +240,7 @@
status = "disabled";
msi-parent = <&msi1>;
- msi1: msi@18013000 {
+ msi1: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 832795b..fe6cba9 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -245,6 +245,15 @@
status = "disabled";
};
+ mailbox: mailbox@25000 {
+ compatible = "brcm,iproc-fa2-mbox";
+ reg = <0x25000 0x445>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
+
nand: nand@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x026000 0x600>,
@@ -288,6 +297,12 @@
#size-cells = <0>;
};
+ crypto@2f000 {
+ compatible = "brcm,spum-nsp-crypto";
+ reg = <0x2f000 0x900>;
+ mboxes = <&mailbox 0>;
+ };
+
gpiob: gpio@30000 {
compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
reg = <0x30000 0x50>;
@@ -306,6 +321,20 @@
status = "disabled";
};
+ ehci0: usb@2a000 {
+ compatible = "generic-ehci";
+ reg = <0x2a000 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci0: usb@2b000 {
+ compatible = "generic-ohci";
+ reg = <0x2b000 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
rng: rng@33000 {
compatible = "brcm,bcm-nsp-rng";
reg = <0x33000 0x14>;
@@ -347,6 +376,7 @@
#size-cells = <0>;
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
+ status = "disabled";
};
watchdog@39000 {
@@ -450,7 +480,7 @@
status = "disabled";
msi-parent = <&msi0>;
- msi0: msi@18012000 {
+ msi0: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
@@ -486,7 +516,7 @@
status = "disabled";
msi-parent = <&msi1>;
- msi1: msi@18013000 {
+ msi1: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
@@ -522,7 +552,7 @@
status = "disabled";
msi-parent = <&msi2>;
- msi2: msi@18014000 {
+ msi2: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 38e6050..a7b5ce1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -69,6 +69,12 @@
bus-width = <4>;
};
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ bus-width = <4>;
+};
+
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
@@ -92,3 +98,11 @@
power-domains = <&power RPI_POWER_DOMAIN_VEC>;
status = "okay";
};
+
+&dsi0 {
+ power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index a3106aa..35cea3f 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -93,10 +93,13 @@
#clock-cells = <1>;
reg = <0x7e101000 0x2000>;
- /* CPRMAN derives everything from the platform's
- * oscillator.
+ /* CPRMAN derives almost everything from the
+ * platform's oscillator. However, the DSI
+ * pixel clocks come from the DSI analog PHY.
*/
- clocks = <&clk_osc>;
+ clocks = <&clk_osc>,
+ <&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+ <&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
};
rng@7e104000 {
@@ -347,6 +350,16 @@
arm,primecell-periphid = <0x00241011>;
};
+ sdhost: mmc@7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <2 24>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 13>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
i2s: i2s@7e203000 {
compatible = "brcm,bcm2835-i2s";
reg = <0x7e203000 0x20>,
@@ -390,6 +403,25 @@
interrupts = <2 14>; /* pwa1 */
};
+ dsi0: dsi@7e209000 {
+ compatible = "brcm,bcm2835-dsi0";
+ reg = <0x7e209000 0x78>;
+ interrupts = <2 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ clocks = <&clocks BCM2835_PLLA_DSI0>,
+ <&clocks BCM2835_CLOCK_DSI0E>,
+ <&clocks BCM2835_CLOCK_DSI0P>;
+ clock-names = "phy", "escape", "pixel";
+
+ clock-output-names = "dsi0_byte",
+ "dsi0_ddr2",
+ "dsi0_ddr";
+
+ };
+
thermal: thermal@7e212000 {
compatible = "brcm,bcm2835-thermal";
reg = <0x7e212000 0x8>;
@@ -456,6 +488,26 @@
interrupts = <2 1>;
};
+ dsi1: dsi@7e700000 {
+ compatible = "brcm,bcm2835-dsi1";
+ reg = <0x7e700000 0x8c>;
+ interrupts = <2 12>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ clocks = <&clocks BCM2835_PLLD_DSI1>,
+ <&clocks BCM2835_CLOCK_DSI1E>,
+ <&clocks BCM2835_CLOCK_DSI1P>;
+ clock-names = "phy", "escape", "pixel";
+
+ clock-output-names = "dsi1_byte",
+ "dsi1_ddr2",
+ "dsi1_ddr";
+
+ status = "disabled";
+ };
+
i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
@@ -499,6 +551,8 @@
clocks = <&clocks BCM2835_PLLH_PIX>,
<&clocks BCM2835_CLOCK_HSM>;
clock-names = "pixel", "hdmi";
+ dmas = <&dma 17>;
+ dma-names = "audio-rx";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index d241cee..4175174 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -31,19 +41,16 @@
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan {
label = "bcm53xx:blue:wan";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
lan {
label = "bcm53xx:blue:lan";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power {
@@ -61,14 +68,12 @@
2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index b0e6204..8fa033f 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -31,7 +41,6 @@
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power {
@@ -49,7 +58,6 @@
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index c9ba6b9..62e1427 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -52,13 +52,11 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power0 {
label = "bcm53xx:red:power";
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power1 {
@@ -76,7 +74,6 @@
router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan {
@@ -88,13 +85,11 @@
wireless0 {
label = "bcm53xx:blue:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
new file mode 100644
index 0000000..126ab58
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "linksys,ea6300-v1", "brcm,bcm4708";
+ model = "Linksys EA6300 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index b9f66c0..a5647ef 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -43,19 +43,16 @@
power1 {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:blue:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index ae0199f..bb66ceb 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -37,7 +47,6 @@
power0 {
label = "bcm53xx:green:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power1 {
@@ -49,13 +58,11 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:blue:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 36b628b1..19ee924 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -37,61 +37,51 @@
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb3-green {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
status-red {
label = "bcm53xx:red:status";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
status-green {
label = "bcm53xx:green:status";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
status-blue {
label = "bcm53xx:blue:status";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-red {
label = "bcm53xx:red:wan";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index d0eec09..1a19e97 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -12,6 +12,14 @@
/ {
compatible = "brcm,bcm4708";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index db8608b..0800a96 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -37,7 +47,6 @@
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan {
@@ -55,7 +64,6 @@
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index d51586d..c2af33e 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -58,7 +68,6 @@
power1 {
label = "bcm53xx:red:power";
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
router0 {
@@ -70,7 +79,6 @@
router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan {
@@ -82,13 +90,11 @@
wireless0 {
label = "bcm53xx:green:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index de041b8..8bef642 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
new file mode 100644
index 0000000..a854a51
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
+ model = "TP-LINK Archer C5 V2";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "bcm53xx:green:lan";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2-port1 {
+ label = "bcm53xx:green:usb2-port1";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ wan-green {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "bcm53xx:green:wps";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2-port2 {
+ label = "bcm53xx:green:usb2-port2";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
index c5f7619..9829d04 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -4,7 +4,17 @@
*
* Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
#include "bcm5301x.dtsi"
@@ -12,6 +22,14 @@
/ {
compatible = "brcm,bcm47081";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index eaca687..df473cc 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -31,7 +41,6 @@
wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power {
@@ -43,7 +52,6 @@
wan {
label = "bcm53xx:red:wan";
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index b32957c..92058c7 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -31,13 +31,11 @@
usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power-white {
@@ -49,37 +47,31 @@
router-amber {
label = "bcm53xx:amber:router";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
router-white {
label = "bcm53xx:white:router";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless-amber {
label = "bcm53xx:amber:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless-white {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
new file mode 100644
index 0000000..3d1d9c2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+ model = "Linksys EA9200";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index f459a98..f43ab47 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -37,43 +47,36 @@
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:white:5ghz";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 8e39a84..d266131 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -28,58 +38,61 @@
leds {
compatible = "gpio-leds";
- power0 {
+ power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- power1 {
+ power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
+ };
+
+ wan-white {
+ label = "bcm53xx:white:wan";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
5ghz-1 {
label = "bcm53xx:white:5ghz-1";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
5ghz-2 {
label = "bcm53xx:white:5ghz-2";
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
@@ -105,6 +118,12 @@
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
};
+
+ brightness {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ };
};
};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index c67bfaa..97aa5d5 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -26,49 +26,41 @@
lan {
label = "bcm53xx:blue:lan";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-blue {
label = "bcm53xx:blue:wan";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power {
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 64ded76..51b0641b 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
@@ -46,37 +56,31 @@
wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:white:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
new file mode 100644
index 0000000..b6750f7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Linksys EA9500";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index 5cf4ab1..5f8621d 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -34,37 +34,31 @@
lan3 {
label = "bcm53xx:green:lan3";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
lan4 {
label = "bcm53xx:green:lan4";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan {
label = "bcm53xx:green:wan";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
lan1 {
label = "bcm53xx:green:lan1";
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
lan2 {
label = "bcm53xx:green:lan2";
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
status {
@@ -76,13 +70,11 @@
2ghz {
label = "bcm53xx:green:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:green:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index 600795e..8599299 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -34,37 +34,31 @@
power1 {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz-1 {
label = "bcm53xx:white:5ghz-1";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz-2 {
label = "bcm53xx:white:5ghz-2";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 4403ae8..34417da 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -26,19 +26,16 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
system {
@@ -48,6 +45,15 @@
};
};
+ pcie0_leds {
+ compatible = "gpio-leds";
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -72,3 +78,30 @@
};
};
};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pcie0_chipcommon: chipcommon@0 {
+ reg = <0 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 00de62d..acee36a 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -18,10 +18,6 @@
/ {
interrupt-parent = <&gic>;
- chosen {
- stdout-path = &uart0;
- };
-
chipcommonA {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;
@@ -70,10 +66,19 @@
clocks = <&periph_clk>;
};
- local-timer@20600 {
+ timer@20600 {
compatible = "arm,cortex-a9-twd-timer";
- reg = <0x20600 0x100>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x20600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&periph_clk>;
+ };
+
+ watchdog@20620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x20620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};
@@ -298,20 +303,6 @@
};
};
- spi@29000 {
- reg = <0x00029000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- spi_nor: spi-nor@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
- linux,part-probe = "ofpart", "bcm47xxpart";
- status = "disabled";
- };
- };
-
gmac0: ethernet@24000 {
reg = <0x24000 0x800>;
};
@@ -329,6 +320,16 @@
};
};
+ i2c0: i2c@18009000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x18009000 0x50>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
lcpll0: lcpll0@1800c100 {
#clock-cells = <1>;
compatible = "brcm,nsp-lcpll0";
@@ -375,4 +376,40 @@
brcm,nand-has-wp;
};
+
+ spi@18029200 {
+ compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+ reg = <0x18029200 0x184>,
+ <0x18029000 0x124>,
+ <0x1811b408 0x004>,
+ <0x180293a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overhead",
+ "mspi_done",
+ "mspi_halted";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi_nor: spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ linux,part-probe = "ofpart", "bcm47xxpart";
+ status = "disabled";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index 2da04d0..eae623f 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -13,8 +13,12 @@
/ {
interrupt-parent = <&gic>;
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- stdout-path = &uart0;
+ stdout-path = "serial0:115200n8";
};
cpus {
@@ -113,6 +117,10 @@
};
};
+ pcie0: pcie@2000 {
+ reg = <0x00002000 0x1000>;
+ };
+
usb2: usb2@4000 {
reg = <0x4000 0x1000>;
ranges;
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
index 42855a7..2e08c89 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -38,14 +38,6 @@
model = "NorthStar SVK (BCM94708)";
compatible = "brcm,bcm94708", "brcm,bcm4708";
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory {
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
index 95e8be6..c37616c 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -38,14 +38,6 @@
model = "NorthStar SVK (BCM94709)";
compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory {
reg = <0x00000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index decd86b..40e694b 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -39,14 +39,6 @@
model = "NorthStar Enterprise Router (BCM953012ER)";
compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory {
reg = <0x00000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
new file mode 100644
index 0000000..3076e81
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -0,0 +1,97 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright(c) 2017 Broadcom
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ model = "NorthStar HR (BCM953012HR)";
+ compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&nandcs {
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "nrootfs";
+ reg = <0x01000000 0x07000000>;
+ };
+};
+
+&spi_nor {
+ status = "okay";
+ spi-max-frequency = <62500000>;
+ m25p,default-addr-width = <3>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000d0000>;
+ };
+ partition@d000 {
+ label = "env";
+ reg = <0x000d0000 0x00030000>;
+ };
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x00900000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index ae31a58..79c168e 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -43,15 +43,69 @@
serial1 = &uart1;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory {
reg = <0x80000000 0x10000000>;
};
};
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "nrootfs";
+ reg = <0x01000000 0x07000000>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+ spi-max-frequency = <62500000>;
+ m25p,default-addr-width = <3>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000d0000>;
+ };
+ partition@d000 {
+ label = "env";
+ reg = <0x000d0000 0x00030000>;
+ };
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x00900000>;
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index df05e7f..f5c4296 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
&amac0 {
status = "okay";
@@ -70,6 +70,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -108,6 +112,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index 4a3ab19..efcb1f6 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
&amac0 {
status = "okay";
@@ -70,6 +70,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -108,6 +112,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 81f7843..b335ce0 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -66,7 +66,13 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&i2c0 {
+ status = "okay";
+
temperature-sensor@4c {
compatible = "adi,adt7461a";
reg = <0x4c>;
@@ -122,6 +128,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index c88b8fe..16ab2d8 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 and SLIC support needed to be complete */
+/* USB 3 and SLIC support needed to be complete */
&amac0 {
status = "okay";
@@ -74,6 +74,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index d503fa0..9b921c6 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 and SLIC support needed to be complete */
+/* USB 3 and SLIC support needed to be complete */
&amac0 {
status = "okay";
@@ -74,6 +74,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index cc0363b..006b08e 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -72,6 +72,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -110,6 +114,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index f8d47e5..64740f8 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -65,6 +65,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -103,6 +107,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 74e15a3..bce251a 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -60,7 +60,7 @@
};
};
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
&amac0 {
status = "okay";
@@ -74,6 +74,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@
};
};
+&ohci0 {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index d15107c..8d244cd 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -9,6 +9,7 @@
*/
/dts-v1/;
#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ti,da850-evm", "ti,da850";
@@ -78,7 +79,10 @@
DRVDD-supply = <&vbat>;
DVDD-supply = <&vbat>;
};
-
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ };
};
wdt: wdt@21000 {
status = "okay";
@@ -293,20 +297,27 @@
&vpif {
pinctrl-names = "default";
- pinctrl-0 = <&vpif_capture_pins>;
+ pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
status = "okay";
/* VPIF capture port */
- port {
- vpif_ch0: endpoint@0 {
- reg = <0>;
- bus-width = <8>;
+ port@0 {
+ vpif_input_ch0: endpoint@0 {
+ reg = <0>;
+ bus-width = <8>;
};
- vpif_ch1: endpoint@1 {
- reg = <1>;
- bus-width = <8>;
- data-shift = <8>;
+ vpif_input_ch1: endpoint@1 {
+ reg = <1>;
+ bus-width = <8>;
+ data-shift = <8>;
+ };
+ };
+
+ /* VPIF display port */
+ port@1 {
+ vpif_output_ch0: endpoint {
+ bus-width = <8>;
};
};
};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index 112ec92..512604a 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -123,6 +123,14 @@
pinctrl-0 = <&system_power_pin>;
};
+ sound {
+ compatible = "pwm-beeper";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm0b_pins>;
+ pwms = <&ehrpwm0 1 1000000 0>;
+ amp-supply = <&>;
+ };
+
/*
* This is a 5V current limiting regulator that is shared by USB,
* the sensor (input) ports, the motor (output) ports and the A/DC.
@@ -139,18 +147,36 @@
enable-active-high;
regulator-boot-on;
};
+
+ /*
+ * This is a simple voltage divider on VCC5V to provide a 2.5V
+ * reference signal to the ADC.
+ */
+ adc_ref: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "adc ref";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ vin-supply = <&vcc5v>;
+ };
+
+ /*
+ * This is the amplifier for the speaker.
+ */
+ amp: regulator3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "amp";
+ gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&pmx_core {
status = "okay";
- spi0_cs3_pin: pinmux_spi0_cs3_pin {
- pinctrl-single,bits = <
- /* CS3 */
- 0xc 0x01000000 0x0f000000
- >;
- };
-
mmc0_cd_pin: pinmux_mmc0_cd {
pinctrl-single,bits = <
/* GP5[14] */
@@ -195,6 +221,13 @@
0x4c 0x00008000 0x0000f000
>;
};
+
+ amp_pins: pinmux_amp_pins {
+ pinctrl-single,bits = <
+ /* GP6[15] */
+ 0x34 0x00000008 0x0000000f
+ >;
+ };
};
&pinconf {
@@ -293,6 +326,18 @@
};
};
};
+
+ adc: adc@3 {
+ compatible = "ti,ads7957";
+ reg = <3>;
+ #io-channel-cells = <1>;
+ spi-max-frequency = <10000000>;
+ vref-supply = <&adc_ref>;
+ };
+};
+
+&ehrpwm0 {
+ status = "okay";
};
&gpio {
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 92d633d..941d455 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -153,6 +153,12 @@
0x10 0x00000010 0x000000f0
>;
};
+ spi0_cs3_pin: pinmux_spi0_cs3_pin {
+ pinctrl-single,bits = <
+ /* CS3 */
+ 0xc 0x01000000 0x0f000000
+ >;
+ };
spi1_pins: pinmux_spi1_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
@@ -216,8 +222,21 @@
0x3c 0x11111111 0xffffffff
/* VP_DIN[8..9] */
0x40 0x00000011 0x000000ff
- /* VP_CLKIN3, VP_CLKIN2 */
- 0x4c 0x00010100 0x000f0f00
+ >;
+ };
+ vpif_display_pins: vpif_display_pins {
+ pinctrl-single,bits = <
+ /* VP_DOUT[2..7] */
+ 0x40 0x11111100 0xffffff00
+ /* VP_DOUT[10..15,0..1] */
+ 0x44 0x11111111 0xffffffff
+ /* VP_DOUT[8..9] */
+ 0x48 0x00000011 0x000000ff
+ /*
+ * VP_CLKOUT3, VP_CLKIN3,
+ * VP_CLKOUT2, VP_CLKIN2
+ */
+ 0x4c 0x00111100 0x00ffff00
>;
};
};
@@ -345,7 +364,13 @@
status = "disabled";
/* VPIF capture port */
- port {
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* VPIF display port */
+ port@1 {
#address-cells = <1>;
#size-cells = <0>;
};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 0bf55fa..1865976 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -25,6 +25,12 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ sata_refclk: fixedclock0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
};
&dm816x_pinmux {
@@ -173,3 +179,7 @@
pinctrl-0 = <&usb1_pins>;
mentor,multipoint = <0>;
};
+
+&sata {
+ clocks = <&sysclk5_ck>, <&sata_refclk>;
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 276211e..59cbf95 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -293,6 +293,13 @@
phy-handle = <&phy1>;
};
+ sata: sata@4a140000 {
+ compatible = "ti,dm816-ahci";
+ reg = <0x4a140000 0x10000>;
+ interrupts = <16>;
+ ti,hwmods = "sata";
+ };
+
mcspi1: spi@48030000 {
compatible = "ti,omap4-mcspi";
reg = <0x48030000 0x1000>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index bbfb9d5..57892f2 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -81,11 +81,7 @@
compatible = "arm,cortex-a15";
reg = <0>;
- operating-points = <
- /* kHz uV */
- 1000000 1060000
- 1176000 1160000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
@@ -99,6 +95,24 @@
};
};
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_wkup>;
+
+ opp_nom@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1060000 850000 1150000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp_od@1176000000 {
+ opp-hz = /bits/ 64 <1176000000>;
+ opp-microvolt = <1160000 885000 1160000>;
+ opp-supported-hw = <0xFF 0x02>;
+ };
+ };
+
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
@@ -1984,6 +1998,23 @@
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
+ coefficients = <0 2000>;
+};
+
+&gpu_thermal {
+ coefficients = <0 2000>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
+
+&dspeve_thermal {
+ coefficients = <0 2000>;
+};
+
+&iva_thermal {
+ coefficients = <0 2000>;
};
/include/ "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 0a78347..24e6746 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -17,6 +17,7 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
};
@@ -79,6 +80,10 @@
};
};
+&cpu0_opp_table {
+ opp-shared;
+};
+
&dss {
reg = <0x58000000 0x80>,
<0x58004054 0x4>,
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 548413e..c9f191c 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -215,6 +215,8 @@
&dsi_0 {
vddcore-supply = <&ldo6_reg>;
vddio-supply = <&ldo6_reg>;
+ samsung,burst-clock-frequency = <250000000>;
+ samsung,esc-clock-frequency = <20000000>;
samsung,pll-clock-frequency = <24000000>;
status = "okay";
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 9c28ef4..590ee44 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -745,23 +745,23 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
opp-microvolt = <800000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <800000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <800000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <825000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <875000>;
};
@@ -835,23 +835,23 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
opp-microvolt = <900000>;
};
- opp@80000000 {
+ opp-80000000 {
opp-hz = /bits/ 64 <80000000>;
opp-microvolt = <900000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <1000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <1000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <1000000>;
};
@@ -861,19 +861,19 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
};
- opp@80000000 {
+ opp-80000000 {
opp-hz = /bits/ 64 <80000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
};
@@ -882,19 +882,19 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
};
- opp@80000000 {
+ opp-80000000 {
opp-hz = /bits/ 64 <80000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
- opp@300000000 {
+ opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
};
};
@@ -903,13 +903,13 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
};
- opp@80000000 {
+ opp-80000000 {
opp-hz = /bits/ 64 <80000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 84fcdff..497a947 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -283,15 +283,6 @@
};
};
- watchdog: watchdog@10060000 {
- compatible = "samsung,s3c2410-wdt";
- reg = <0x10060000 0x100>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_WDT>;
- clock-names = "watchdog";
- status = "disabled";
- };
-
rtc: rtc@10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index a2c6a13..312650e 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -328,7 +328,3 @@
&tmu {
status = "okay";
};
-
-&watchdog {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 0ca1b4d3..1743ca8 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -197,6 +197,8 @@
&dsi_0 {
vddcore-supply = <&vusb_reg>;
vddio-supply = <&vmipi_reg>;
+ samsung,burst-clock-frequency = <500000000>;
+ samsung,esc-clock-frequency = <20000000>;
samsung,pll-clock-frequency = <24000000>;
status = "okay";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index f940818..768fb07 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -119,6 +119,14 @@
};
};
+ watchdog: watchdog@10060000 {
+ compatible = "samsung,s3c6410-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ };
+
clock: clock-controller@10030000 {
compatible = "samsung,exynos4210-clock";
reg = <0x10030000 0x20000>;
@@ -335,15 +343,15 @@
compatible = "operating-points-v2";
opp-shared;
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <1025000>;
};
- opp@267000000 {
+ opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <1050000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1150000>;
};
@@ -353,13 +361,13 @@
compatible = "operating-points-v2";
opp-shared;
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
};
@@ -368,10 +376,10 @@
compatible = "operating-points-v2";
opp-shared;
- opp@5000000 {
+ opp-5000000 {
opp-hz = /bits/ 64 <5000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
@@ -380,10 +388,10 @@
compatible = "operating-points-v2";
opp-shared;
- opp@10000000 {
+ opp-10000000 {
opp-hz = /bits/ 64 <10000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
};
@@ -392,13 +400,13 @@
compatible = "operating-points-v2";
opp-shared;
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
};
@@ -407,13 +415,13 @@
compatible = "operating-points-v2";
opp-shared;
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index a36cd36..4cd6248 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -495,7 +495,3 @@
vtmu-supply = <&ldo16_reg>;
status = "okay";
};
-
-&watchdog {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 78f118c..0f1ff79 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -555,7 +555,3 @@
vtmu-supply = <&ldo10_reg>;
status = "okay";
};
-
-&watchdog {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index a1ab6f9..7a83e2d 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -541,7 +541,3 @@
&serial_3 {
status = "okay";
};
-
-&watchdog {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi
index e75bc17..a67bd95 100644
--- a/arch/arm/boot/dts/exynos4412-prime.dtsi
+++ b/arch/arm/boot/dts/exynos4412-prime.dtsi
@@ -20,12 +20,12 @@
};
&cpu0_opp_table {
- opp@1600000000 {
+ opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <1350000>;
clock-latency-ns = <200000>;
};
- opp@1704000000 {
+ opp-1704000000 {
opp-hz = /bits/ 64 <1704000000>;
opp-microvolt = <1350000>;
clock-latency-ns = <200000>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 41ecd6d..82221a0 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -385,6 +385,8 @@
&dsi_0 {
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
+ samsung,burst-clock-frequency = <500000000>;
+ samsung,esc-clock-frequency = <20000000>;
samsung,pll-clock-frequency = <24000000>;
status = "okay";
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 235bbb6..7ff03a7 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -76,73 +76,73 @@
compatible = "operating-points-v2";
opp-shared;
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
- opp@300000000 {
+ opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <925000>;
clock-latency-ns = <200000>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <950000>;
clock-latency-ns = <200000>;
};
- opp@600000000 {
+ opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <975000>;
clock-latency-ns = <200000>;
};
- opp@700000000 {
+ opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <987500>;
clock-latency-ns = <200000>;
};
- opp@800000000 {
+ opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <200000>;
opp-suspend;
};
- opp@900000000 {
+ opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1037500>;
clock-latency-ns = <200000>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1087500>;
clock-latency-ns = <200000>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1137500>;
clock-latency-ns = <200000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1187500>;
clock-latency-ns = <200000>;
};
- opp@1300000000 {
+ opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1250000>;
clock-latency-ns = <200000>;
};
- opp@1400000000 {
+ opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1287500>;
clock-latency-ns = <200000>;
};
- cpu0_opp_1500: opp@1500000000 {
+ cpu0_opp_1500: opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1350000>;
clock-latency-ns = <200000>;
@@ -215,6 +215,15 @@
};
};
+ watchdog: watchdog@10060000 {
+ compatible = "samsung,exynos5250-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ };
+
adc: adc@126C0000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x126C0000 0x100>;
@@ -433,23 +442,23 @@
compatible = "operating-points-v2";
opp-shared;
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <900000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <900000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <900000>;
};
- opp@267000000 {
+ opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <950000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1050000>;
};
@@ -459,16 +468,16 @@
compatible = "operating-points-v2";
opp-shared;
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
- opp@267000000 {
+ opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
};
};
@@ -525,19 +534,19 @@
compatible = "operating-points-v2";
opp-shared;
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <900000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <925000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <950000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <1000000>;
};
@@ -547,10 +556,10 @@
compatible = "operating-points-v2";
opp-shared;
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
};
@@ -559,10 +568,10 @@
compatible = "operating-points-v2";
opp-shared;
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
};
@@ -571,10 +580,10 @@
compatible = "operating-points-v2";
opp-shared;
- opp@50000000 {
+ opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
new file mode 100644
index 0000000..c8771c6
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device tree sources for Exynos5420 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <55>;
+samsung,tmu_min_efuse_value = <0>;
+samsung,tmu_max_efuse_value = <100>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 7dc9dc8..0db0bcf 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -49,62 +49,62 @@
cluster_a15_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
- opp@1800000000 {
+ opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1250000>;
clock-latency-ns = <140000>;
};
- opp@1700000000 {
+ opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
opp-microvolt = <1212500>;
clock-latency-ns = <140000>;
};
- opp@1600000000 {
+ opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <1175000>;
clock-latency-ns = <140000>;
};
- opp@1500000000 {
+ opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1137500>;
clock-latency-ns = <140000>;
};
- opp@1400000000 {
+ opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1112500>;
clock-latency-ns = <140000>;
};
- opp@1300000000 {
+ opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1062500>;
clock-latency-ns = <140000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1037500>;
clock-latency-ns = <140000>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1012500>;
clock-latency-ns = <140000>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = < 987500>;
clock-latency-ns = <140000>;
};
- opp@900000000 {
+ opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = < 962500>;
clock-latency-ns = <140000>;
};
- opp@800000000 {
+ opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = < 937500>;
clock-latency-ns = <140000>;
};
- opp@700000000 {
+ opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = < 912500>;
clock-latency-ns = <140000>;
@@ -114,42 +114,42 @@
cluster_a7_opp_table: opp_table1 {
compatible = "operating-points-v2";
opp-shared;
- opp@1300000000 {
+ opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1275000>;
clock-latency-ns = <140000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1212500>;
clock-latency-ns = <140000>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1162500>;
clock-latency-ns = <140000>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1112500>;
clock-latency-ns = <140000>;
};
- opp@900000000 {
+ opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1062500>;
clock-latency-ns = <140000>;
};
- opp@800000000 {
+ opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <140000>;
};
- opp@700000000 {
+ opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <975000>;
clock-latency-ns = <140000>;
};
- opp@600000000 {
+ opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <937500>;
clock-latency-ns = <140000>;
@@ -699,7 +699,7 @@
interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu1: tmu@10064000 {
@@ -708,7 +708,7 @@
interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu2: tmu@10068000 {
@@ -717,7 +717,7 @@
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu3: tmu@1006c000 {
@@ -726,7 +726,7 @@
interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_gpu: tmu@100a0000 {
@@ -735,7 +735,7 @@
interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
sysmmu_g2dr: sysmmu@0x10A60000 {
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 77d35bb..a4ea018 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -189,7 +189,7 @@
};
watchdog@110000 {
- compatible = "samsung,s3c2410-wdt";
+ compatible = "samsung,s3c6410-wdt";
reg = <0x110000 0x1000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
@@ -290,11 +290,22 @@
clock-names = "usbhost";
};
+ pcie_phy0: pcie-phy@270000 {
+ #phy-cells = <0>;
+ compatible = "samsung,exynos5440-pcie-phy";
+ reg = <0x270000 0x1000>, <0x271000 0x40>;
+ };
+
+ pcie_phy1: pcie-phy@272000 {
+ #phy-cells = <0>;
+ compatible = "samsung,exynos5440-pcie-phy";
+ reg = <0x272000 0x1000>, <0x271040 0x40>;
+ };
+
pcie_0: pcie@290000 {
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
- reg = <0x290000 0x1000
- 0x270000 0x1000
- 0x271000 0x40>;
+ reg = <0x290000 0x1000>, <0x40000000 0x1000>;
+ reg-names = "elbi", "config";
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -303,8 +314,8 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /* configuration space */
- 0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */
+ phys = <&pcie_phy0>;
+ ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
@@ -315,9 +326,8 @@
pcie_1: pcie@2a0000 {
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
- reg = <0x2a0000 0x1000
- 0x272000 0x1000
- 0x271040 0x40>;
+ reg = <0x2a0000 0x1000>, <0x60000000 0x1000>;
+ reg-names = "elbi", "config";
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -326,8 +336,8 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /* configuration space */
- 0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */
+ phys = <&pcie_phy1>;
+ ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index 8213016..9ddb6ba 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -24,60 +24,60 @@
};
&cluster_a15_opp_table {
- opp@1700000000 {
+ opp-1700000000 {
opp-microvolt = <1250000>;
};
- opp@1600000000 {
+ opp-1600000000 {
opp-microvolt = <1250000>;
};
- opp@1500000000 {
+ opp-1500000000 {
opp-microvolt = <1100000>;
};
- opp@1400000000 {
+ opp-1400000000 {
opp-microvolt = <1100000>;
};
- opp@1300000000 {
+ opp-1300000000 {
opp-microvolt = <1100000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-microvolt = <1000000>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-microvolt = <1000000>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-microvolt = <1000000>;
};
- opp@900000000 {
+ opp-900000000 {
opp-microvolt = <1000000>;
};
- opp@800000000 {
+ opp-800000000 {
opp-microvolt = <900000>;
};
- opp@700000000 {
+ opp-700000000 {
opp-microvolt = <900000>;
};
- opp@600000000 {
+ opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000>;
clock-latency-ns = <140000>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <900000>;
clock-latency-ns = <140000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <900000>;
clock-latency-ns = <140000>;
};
- opp@300000000 {
+ opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <900000>;
clock-latency-ns = <140000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <900000>;
clock-latency-ns = <140000>;
@@ -85,46 +85,46 @@
};
&cluster_a7_opp_table {
- opp@1300000000 {
+ opp-1300000000 {
opp-microvolt = <1250000>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-microvolt = <1250000>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-microvolt = <1250000>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-microvolt = <1100000>;
};
- opp@900000000 {
+ opp-900000000 {
opp-microvolt = <1100000>;
};
- opp@800000000 {
+ opp-800000000 {
opp-microvolt = <1100000>;
};
- opp@700000000 {
+ opp-700000000 {
opp-microvolt = <1000000>;
};
- opp@600000000 {
+ opp-600000000 {
opp-microvolt = <1000000>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <140000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <140000>;
};
- opp@300000000 {
+ opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <900000>;
clock-latency-ns = <140000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <900000>;
clock-latency-ns = <140000>;
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
new file mode 100644
index 0000000..7668ba5
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -0,0 +1,102 @@
+/*
+ * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Raidsonic NAS IB-4220-B";
+ compatible = "raidsonic,ib-4220-b", "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,19200n8";
+ stdout-path = &uart0;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@29 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_SETUP>;
+ label = "Backup button";
+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ };
+ button@31 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "Softreset button";
+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@28 {
+ label = "nas4220b:orange:hdd";
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ led@30 {
+ label = "nas4220b:green:os";
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ soc {
+ flash@30000000 {
+ status = "okay";
+ /* 16MB of flash */
+ reg = <0x30000000 0x01000000>;
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+ partition@20000 {
+ label = "Kernel";
+ reg = <0x00020000 0x00300000>;
+ };
+ partition@320000 {
+ label = "Ramdisk";
+ reg = <0x00320000 0x00600000>;
+ };
+ partition@920000 {
+ label = "Application";
+ reg = <0x00920000 0x00600000>;
+ };
+ partition@f20000 {
+ label = "VCTL";
+ reg = <0x00f20000 0x00020000>;
+ read-only;
+ };
+ partition@f40000 {
+ label = "CurConf";
+ reg = <0x00f40000 0x000a0000>;
+ read-only;
+ };
+ partition@fe0000 {
+ label = "FIS directory";
+ reg = <0x00fe0000 0x00020000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
new file mode 100644
index 0000000..7b920bf
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -0,0 +1,65 @@
+/*
+ * Device Tree file for Teltonika RUT1xx
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Teltonika RUT1xx";
+ compatible = "teltonika,rut1xx", "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@28 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_SETUP>;
+ label = "Reset to defaults";
+ gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@7 {
+ /* FIXME: add the LED color */
+ label = "rut1xx::gsm";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ led@31 {
+ /* FIXME: add the LED color */
+ label = "rut1xx::power";
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ soc {
+ flash@30000000 {
+ status = "okay";
+ /* 8MB of flash */
+ reg = <0x30000000 0x00800000>;
+ /* TODO: add flash partitions here */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
new file mode 100644
index 0000000..46309e7
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -0,0 +1,118 @@
+/*
+ * Device Tree file for ITian Square One SQ201 NAS
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ITian Square One SQ201";
+ compatible = "itian,sq201", "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@18 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_SETUP>;
+ label = "factory reset";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@20 {
+ label = "sq201:green:info";
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led@31 {
+ label = "sq201:green:usb";
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "usb-host";
+ };
+ };
+
+ soc {
+ flash@30000000 {
+ status = "okay";
+ /* 16MB of flash */
+ reg = <0x30000000 0x01000000>;
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00120000>;
+ read-only;
+ };
+ partition@120000 {
+ label = "Kernel";
+ reg = <0x00120000 0x00200000>;
+ };
+ partition@320000 {
+ label = "Ramdisk";
+ reg = <0x00320000 0x00600000>;
+ };
+ partition@920000 {
+ label = "Application";
+ reg = <0x00920000 0x00600000>;
+ };
+ partition@f20000 {
+ label = "VCTL";
+ reg = <0x00f20000 0x00020000>;
+ read-only;
+ };
+ partition@f40000 {
+ label = "CurConf";
+ reg = <0x00f40000 0x000a0000>;
+ read-only;
+ };
+ partition@fe0000 {
+ label = "FIS directory";
+ reg = <0x00fe0000 0x00020000>;
+ read-only;
+ };
+ };
+
+ pci@50000000 {
+ status = "okay";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 1>,
+ <0x6000 0 0 4 &pci_intc 2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
new file mode 100644
index 0000000..63b756e
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -0,0 +1,102 @@
+/*
+ * Device Tree file for Wiliboard WBD-111
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Wiliboard WBD-111";
+ compatible = "wiliboard,wbd111", "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@5 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_SETUP>;
+ label = "reset";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "wbd111:red:L3";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led@2 {
+ label = "wbd111:green:L4";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led@3 {
+ label = "wbd111:red:L4";
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led@5 {
+ label = "wbd111:green:L3";
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ soc {
+ flash@30000000 {
+ status = "okay";
+ /* 8MB of flash */
+ reg = <0x30000000 0x00800000>;
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+ partition@20000 {
+ label = "kernel";
+ reg = <0x00020000 0x00100000>;
+ };
+ partition@120000 {
+ label = "rootfs";
+ reg = <0x00120000 0x006a0000>;
+ };
+ partition@7c0000 {
+ label = "VCTL";
+ reg = <0x007c0000 0x00010000>;
+ read-only;
+ };
+ partition@7d0000 {
+ label = "cfg";
+ reg = <0x007d0000 0x00010000>;
+ read-only;
+ };
+ partition@7e0000 {
+ label = "FIS";
+ reg = <0x007e0000 0x00010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
new file mode 100644
index 0000000..9747f5a
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -0,0 +1,102 @@
+/*
+ * Device Tree file for Wiliboard WBD-222
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Wiliboard WBD-222";
+ compatible = "wiliboard,wbd222", "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@5 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_SETUP>;
+ label = "reset";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "wbd111:red:L3";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led@2 {
+ label = "wbd111:green:L4";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led@3 {
+ label = "wbd111:red:L4";
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led@5 {
+ label = "wbd111:green:L3";
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ soc {
+ flash@30000000 {
+ status = "okay";
+ /* 8MB of flash */
+ reg = <0x30000000 0x00800000>;
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+ partition@20000 {
+ label = "kernel";
+ reg = <0x00020000 0x00100000>;
+ };
+ partition@120000 {
+ label = "rootfs";
+ reg = <0x00120000 0x006a0000>;
+ };
+ partition@7c0000 {
+ label = "VCTL";
+ reg = <0x007c0000 0x00010000>;
+ read-only;
+ };
+ partition@7d0000 {
+ label = "cfg";
+ reg = <0x007d0000 0x00010000>;
+ read-only;
+ };
+ partition@7e0000 {
+ label = "FIS";
+ reg = <0x007e0000 0x00010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
new file mode 100644
index 0000000..b8d011b
--- /dev/null
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -0,0 +1,156 @@
+/*
+ * Device Tree file for Cortina systems Gemini SoC
+ */
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+ interrupt-parent = <&intcon>;
+
+ flash@30000000 {
+ compatible = "cortina,gemini-flash", "cfi-flash";
+ syscon = <&syscon>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
+
+ syscon: syscon@40000000 {
+ compatible = "cortina,gemini-syscon", "syscon", "simple-mfd";
+ reg = <0x40000000 0x1000>;
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&syscon>;
+ /* GLOBAL_RESET register */
+ offset = <0x0c>;
+ /* RESET_GLOBAL | RESET_CPU1 */
+ mask = <0xC0000000>;
+ };
+ };
+
+ watchdog@41000000 {
+ compatible = "cortina,gemini-watchdog";
+ reg = <0x41000000 0x1000>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ uart0: serial@42000000 {
+ compatible = "ns16550a";
+ reg = <0x42000000 0x100>;
+ clock-frequency = <48000000>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ };
+
+ timer@43000000 {
+ compatible = "cortina,gemini-timer";
+ reg = <0x43000000 0x1000>;
+ interrupt-parent = <&intcon>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+ <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+ <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+ syscon = <&syscon>;
+ };
+
+ rtc@45000000 {
+ compatible = "cortina,gemini-rtc";
+ reg = <0x45000000 0x100>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ intcon: interrupt-controller@48000000 {
+ compatible = "faraday,ftintc010";
+ reg = <0x48000000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ power-controller@4b000000 {
+ compatible = "cortina,gemini-power-controller";
+ reg = <0x4b000000 0x100>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ gpio0: gpio@4d000000 {
+ compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+ reg = <0x4d000000 0x100>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@4e000000 {
+ compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+ reg = <0x4e000000 0x100>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@4f000000 {
+ compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+ reg = <0x4f000000 0x100>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pci@50000000 {
+ compatible = "cortina,gemini-pci", "faraday,ftpci100";
+ /*
+ * The first 256 bytes in the IO range is actually used
+ * to configure the host bridge.
+ */
+ reg = <0x50000000 0x100>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ status = "disabled";
+
+ bus-range = <0x00 0xff>;
+ /* PCI ranges mappings */
+ ranges =
+ /* 1MiB I/O space 0x50000000-0x500fffff */
+ <0x01000000 0 0 0x50000000 0 0x00100000>,
+ /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+ <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+ /* DMA ranges */
+ dma-ranges =
+ /* 128MiB at 0x00000000-0x07ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+ /* 64MiB at 0x00000000-0x03ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+ /* 64MiB at 0x00000000-0x03ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ /*
+ * This PCI host bridge variant has a cascaded interrupt
+ * controller embedded in the host bridge.
+ */
+ pci_intc: interrupt-controller {
+ interrupt-parent = <&intcon>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 9300711..db39bd6 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -179,8 +179,6 @@
};
&usbotg {
- phy_type = "utmi";
- dr_mode = "otg";
external-vbus-divider;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 7029210..d921dd2 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -309,8 +309,6 @@
};
&usbotg {
- phy_type = "utmi";
- dr_mode = "otg";
external-vbus-divider;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index f840f03..6c63dca 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -17,8 +17,6 @@
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
-#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
-
#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000
#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000
@@ -68,7 +66,6 @@
#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x00 0x000
#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x05 0x000
-#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000
#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x06 0x000
#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000
@@ -542,6 +539,8 @@
#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x01 0x000
#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x05 0x000
+#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
+
#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000
#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index e0ba550..0cdf333 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -93,6 +93,11 @@
reg = <0x43f00000 0x100000>;
ranges;
+ aips1: bridge@43f00000 {
+ compatible = "fsl,imx25-aips";
+ reg = <0x43f00000 0x4000>;
+ };
+
i2c1: i2c@43f80000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -342,6 +347,11 @@
reg = <0x53f00000 0x100000>;
ranges;
+ aips2: bridge@53f00000 {
+ compatible = "fsl,imx25-aips";
+ reg = <0x53f00000 0x4000>;
+ };
+
clks: ccm@53f80000 {
compatible = "fsl,imx25-ccm";
reg = <0x53f80000 0x4000>;
@@ -544,6 +554,8 @@
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
+ phy_type = "utmi";
+ dr_mode = "otg";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
new file mode 100644
index 0000000..bd3fd47
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+ model = "I2SE Duckbill 2 485";
+ compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <8>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ non-removable;
+ };
+
+ ssp2: ssp@80014000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_4bit_pins_b
+ &mmc2_cd_cfg &mmc2_sck_cfg_b>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_phy_reset_pin: mac0-phy-reset@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_phy_int_pin: mac0-phy-int@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_pins: leds@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_MCLK__GPIO_3_20
+ MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+ MX28_PAD_I2C0_SCL__GPIO_3_24
+ MX28_PAD_I2C0_SDA__GPIO_3_25
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_2pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+ phy-supply = <®_3p3v>;
+ phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <25>;
+ phy-handle = <ðphy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_phy_int_pin>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ max-speed = <100>;
+ };
+ };
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ status-red {
+ label = "duckbill:red:status";
+ gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ status-green {
+ label = "duckbill:green:status";
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ rs485-red {
+ label = "duckbill:red:rs485";
+ gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ };
+
+ rs485-green {
+ label = "duckbill:green:rs485";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
new file mode 100644
index 0000000..4450047
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+ model = "I2SE Duckbill 2 EnOcean";
+ compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <8>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ non-removable;
+ };
+
+ ssp2: ssp@80014000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_4bit_pins_b
+ &mmc2_cd_cfg &mmc2_sck_cfg_b>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_phy_reset_pin: mac0-phy-reset@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_phy_int_pin: mac0-phy-int@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_pins: leds@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_MCLK__GPIO_3_20
+ MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+ MX28_PAD_AUART0_CTS__GPIO_3_2
+ MX28_PAD_I2C0_SCL__GPIO_3_24
+ MX28_PAD_I2C0_SDA__GPIO_3_25
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ enocean_button: enocean-button@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_RTS__GPIO_3_3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_2pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+ phy-supply = <®_3p3v>;
+ phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <25>;
+ phy-handle = <ðphy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_phy_int_pin>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ max-speed = <100>;
+ };
+ };
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ status-red {
+ label = "duckbill:red:status";
+ gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ status-green {
+ label = "duckbill:green:status";
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ enocean-blue {
+ label = "duckbill:blue:enocean";
+ gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ };
+
+ enocean-red {
+ label = "duckbill:red:enocean";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ };
+
+ enocean-green {
+ label = "duckbill:green:enocean";
+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&enocean_button>;
+
+ enocean {
+ label = "EnOcean";
+ linux,code = <KEY_NEW>;
+ gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
new file mode 100644
index 0000000..927732e
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+ model = "I2SE Duckbill 2 SPI";
+ compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
+
+ aliases {
+ ethernet1 = &qca7000;
+ };
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <8>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ non-removable;
+ };
+
+ ssp2: ssp@80014000 {
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+
+ qca7000: ethernet@0 {
+ reg = <0>;
+ compatible = "qca,qca7000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qca7000_pins>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <8000000>;
+ };
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_phy_reset_pin: mac0-phy-reset@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_phy_int_pin: mac0-phy-int@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_pins: led@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_MCLK__GPIO_3_20
+ MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ qca7000_pins: qca7000@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */
+ MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */
+ MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */
+ MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */
+ MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */
+ MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ status = "okay";
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+ phy-supply = <®_3p3v>;
+ phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <25>;
+ phy-handle = <ðphy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_phy_int_pin>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ max-speed = <100>;
+ };
+ };
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ status-red {
+ label = "duckbill:red:status";
+ gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ status-green {
+ label = "duckbill:green:status";
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
new file mode 100644
index 0000000..7fa3d75
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+ model = "I2SE Duckbill 2";
+ compatible = "i2se,duckbill-2", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <8>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ non-removable;
+ };
+
+ ssp2: ssp@80014000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_4bit_pins_b
+ &mmc2_cd_cfg &mmc2_sck_cfg_b>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_phy_reset_pin: mac0-phy-reset@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_phy_int_pin: mac0-phy-int@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_pins: leds@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_MCLK__GPIO_3_20
+ MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_2pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+ phy-supply = <®_3p3v>;
+ phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <25>;
+ phy-handle = <ðphy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_phy_int_pin>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ max-speed = <100>;
+ };
+ };
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ status-red {
+ label = "duckbill:red:status";
+ gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ status-green {
+ label = "duckbill:green:status";
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index ce1a7ef..3e4385d 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -10,6 +11,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx28.dtsi"
/ {
@@ -32,6 +34,13 @@
status = "okay";
};
+ ssp2: ssp@80014000 {
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+ };
+
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
@@ -39,14 +48,24 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
- MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
+ MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */
>;
fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- led_pins_a: led_gpio@0 {
+ mac0_phy_reset_pin: mac0-phy-reset@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_pins: leds@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_AUART1_RX__GPIO_3_4
@@ -60,6 +79,22 @@
};
apbx@80040000 {
+ lradc@80050000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_2pins_a>;
+ status = "okay";
+ };
+
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
@@ -75,47 +110,43 @@
ahb@80080000 {
usb0: usb@80080000 {
status = "okay";
+ dr_mode = "peripheral";
};
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&mac0_pins_a>;
+ pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
phy-supply = <®_3p3v>;
phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <100>;
+ phy-reset-duration = <25>;
status = "okay";
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&led_pins_a>;
+ pinctrl-0 = <&led_pins>;
- status {
- label = "duckbill:green:status";
- gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
- };
-
- failure {
+ status-red {
label = "duckbill:red:status";
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ status-green {
+ label = "duckbill:green:status";
+ gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
};
};
};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 2df63be..bb53294 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -57,7 +57,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_a
&mmc2_cd_cfg
- &mmc2_sck_cfg>;
+ &mmc2_sck_cfg_a>;
bus-width = <4>;
vmmc-supply = <®_vddio_sd1>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 148fcf4..2f4ebe0 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -590,6 +590,22 @@
fsl,pull-up = <MXS_PULL_ENABLE>;
};
+ mmc2_4bit_pins_b: mmc2-4bit@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ MX28_PAD_SSP2_MOSI__SSP2_CMD
+ MX28_PAD_SSP2_MISO__SSP2_D0
+ MX28_PAD_SSP2_SS0__SSP2_D3
+ MX28_PAD_SSP2_SS1__SSP2_D1
+ MX28_PAD_SSP2_SS2__SSP2_D2
+ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
mmc2_cd_cfg: mmc2-cd-cfg {
fsl,pinmux-ids = <
MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
@@ -597,7 +613,8 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- mmc2_sck_cfg: mmc2-sck-cfg {
+ mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
+ reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_SSP0_DATA7__SSP2_SCK
>;
@@ -605,6 +622,15 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
i2c0_pins_a: i2c0@0 {
reg = <0>;
fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index ceae909..2a98afc 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -109,7 +109,7 @@
ranges;
esdhc1: esdhc@50004000 {
- compatible = "fsl,imx50-esdhc";
+ compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
@@ -121,7 +121,7 @@
};
esdhc2: esdhc@50008000 {
- compatible = "fsl,imx50-esdhc";
+ compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
@@ -170,7 +170,7 @@
};
esdhc3: esdhc@50020000 {
- compatible = "fsl,imx50-esdhc";
+ compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
@@ -182,7 +182,7 @@
};
esdhc4: esdhc@50024000 {
- compatible = "fsl,imx50-esdhc";
+ compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index f4c158c..d3d662e 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -88,8 +88,8 @@
};
ldo7_reg: ldo7 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
};
ldo8_reg: ldo8 {
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index 479ca4c..de22158 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -128,8 +128,8 @@
vdac_reg: vdac {
regulator-name = "VDAC";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2775000>;
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
};
vgen1_reg: vgen1 {
diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts
new file mode 100644
index 0000000..103261e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
+ compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts
new file mode 100644
index 0000000..9c6d3cd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5904.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
+ compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index 116bebb..404a93d 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -104,4 +104,11 @@
output-low;
line-name = "PCA9539-P05";
};
+
+ P07 {
+ gpio-hog;
+ gpios = <7 0>;
+ output-low;
+ line-name = "PCA9539-P07";
+ };
};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 33f5c43..7f9f176 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -97,6 +97,13 @@
output-low;
line-name = "PCA9539-P05";
};
+
+ P07 {
+ gpio-hog;
+ gpios = <7 0>;
+ output-low;
+ line-name = "PCA9539-P07";
+ };
};
&usbphy1 {
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index d78514c..2c1e98e 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -72,6 +72,14 @@
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&stdp4028_in>;
+ };
+ };
};
};
@@ -142,3 +150,65 @@
reg = <0x4a>;
};
};
+
+&mux2_i2c2 {
+ clock-frequency = <100000>;
+
+ stdp2690@72 {
+ compatible = "megachips,stdp2690-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ stdp2690_in: endpoint {
+ remote-endpoint = <&stdp4028_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ stdp2690_out: endpoint {
+ /* Connector for external display */
+ };
+ };
+ };
+ };
+
+ stdp4028@73 {
+ compatible = "megachips,stdp4028-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ stdp4028_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ stdp4028_out: endpoint {
+ remote-endpoint = <&stdp2690_in>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 36d6bb3..c90b26f 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -102,7 +102,7 @@
m25_eeprom: m25p80@0 {
compatible = "atmel,at25";
- spi-max-frequency = <20000000>;
+ spi-max-frequency = <10000000>;
size = <0x8000>;
pagesize = <64>;
reg = <0>;
@@ -183,20 +183,6 @@
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- P06 {
- gpio-hog;
- gpios = <6 0>;
- output-low;
- line-name = "PCA9539-P06";
- };
-
- P07 {
- gpio-hog;
- gpios = <7 0>;
- output-low;
- line-name = "PCA9539-P07";
- };
-
P10 {
gpio-hog;
gpios = <8 0>;
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index d8a5789..66cac53 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -43,6 +43,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
#include "imx6q.dtsi"
/ {
@@ -90,6 +91,34 @@
enable-active-high;
};
+ sound-analog {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board analog audio";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "RHPOUT",
+ "Headphone Jack", "LHPOUT",
+ "MICIN", "Mic Bias",
+ "Mic Bias", "Mic Jack";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound_master: simple-audio-card,cpu {
+ sound-dai = <&ssi2>;
+ system-clock-frequency = <2822400>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8731>;
+ };
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
@@ -99,6 +128,36 @@
};
};
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ ssi2 {
+ fsl,audmux-port = <1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_RCLKDIR |
+ IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(3))
+ IMX_AUDMUX_V2_PDCR_RXDSEL(3)
+ >;
+ };
+
+ audmux4 {
+ fsl,audmux-port = <3>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+ IMX_AUDMUX_V2_PTCR_RCLKDIR |
+ IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(1))
+ IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+ >;
+ };
+};
+
&cpu0 {
/*
* Although the imx6q fuse indicates that 1.2GHz operation is possible,
@@ -160,9 +219,25 @@
reg = <0x50>;
pagesize = <16>;
};
+
+ wm8731: codec@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8731";
+ reg = <0x1a>;
+ };
};
&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x17059
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x17059
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x17059
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x17059
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059
+ >;
+ };
+
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
@@ -279,6 +354,14 @@
status = "okay";
};
+&ssi2 {
+ assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>,
+ <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <0>, <786432000>;
+ status = "okay";
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts
new file mode 100644
index 0000000..a182e4c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
+ compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts
new file mode 100644
index 0000000..ca1e2ae
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5904.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
+ compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
new file mode 100644
index 0000000..49b60ca
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
+ compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <60000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <40>;
+ hfront-porch = <40>;
+ vback-porch = <10>;
+ vfront-porch = <3>;
+ hsync-len = <80>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
new file mode 100644
index 0000000..9e230f5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
+ compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <46800000>;
+ hactive = <1280>;
+ vactive = <480>;
+ hback-porch = <353>;
+ hfront-porch = <47>;
+ vback-porch = <39>;
+ vfront-porch = <4>;
+ hsync-len = <8>;
+ vsync-len = <2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 59eb7ad..5613dd9 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -57,3 +57,37 @@
&can2 {
status = "okay";
};
+
+&i2c1 {
+ max11801: touchscreen@48 {
+ compatible = "maxim,max11801";
+ reg = <0x48>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <60000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <30>;
+ hfront-porch = <30>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ hsync-len = <64>;
+ vsync-len = <20>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 69bdd82..d900ad6 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -101,9 +101,11 @@
hdmi-connector {
compatible = "hdmi-connector";
-
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hpd>;
type = "a";
ddc-i2c-bus = <&i2c_dvi_ddc>;
+ hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
port {
hdmi_connector_in: endpoint {
@@ -209,6 +211,12 @@
>;
};
+ pinctrl_hpd: hpdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
new file mode 100644
index 0000000..b2d3466
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <imx6q.dtsi>
+#include <imx6qdl-zii-rdu2.dtsi>
+
+/ {
+ model = "ZII RDU2 Board";
+ compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
new file mode 100644
index 0000000..4444251
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -0,0 +1,654 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <100>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 30 0>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_12p0: regulator-12p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "12P0V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-tlv320";
+ model = "imx-tlv320";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&tlv320aic3105>;
+ /* routing of sink, source */
+ audio-routing =
+ /* TLV320 LINE1L pin <-> Mic Jack connector */
+ "LINE1L", "Mic Jack",
+ /* board Headphone Jack <-> HPOUT */
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Mic Jack", "Mic Bias";
+ mux-int-port = <1>;
+ mux-ext-port = <6>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pca9555: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ dts1672: rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ /* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
+ reg_1p8v: sw1 {
+ regulator-name = "vdd1p8";
+ regulator-min-microvolt = <1033310>;
+ regulator-max-microvolt = <2004000>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR (1+R1/R2 = 2.105) */
+ reg_vdd_ddr: sw2 {
+ regulator-name = "vddddr";
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <1684000>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM (1+R1/R2 = 1.635) */
+ reg_vdd_arm: sw3 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ linux,phandle = <®_vdd_arm>;
+ };
+
+ /* VDD_SOC (1+R1/R2 = 1.635) */
+ reg_vdd_soc: sw4 {
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ linux,phandle = <®_vdd_soc>;
+ };
+
+ /* VDD_1P0 (1+R1/R2 = 1.38): */
+ reg_1p0v: ldo2 {
+ regulator-name = "vdd1p0";
+ regulator-min-microvolt = <1002777>;
+ regulator-max-microvolt = <1002777>;
+ lltc,fb-voltage-divider = <100000 261000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_HIGH (1+R1/R2 = 4.17) */
+ reg_3p0v: ldo4 {
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ tlv320aic3105: codec@18 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x18>;
+ gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
+ /* Regulators */
+ DRVDD-supply = <®_3p3v>;
+ AVDD-supply = <®_3p3v>;
+ IOVDD-supply = <®_3p3v>;
+ DVDD-supply = <®_1p8v>;
+ };
+
+ accelerometer@1d {
+ compatible = "fsl,mma8451";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
+ };
+
+ /* headphone detect */
+ ts3a227e@3b {
+ compatible = "ti,ts3a227e";
+ reg = <0x3b>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ ti,micbias = <4>; /* 2.5V micbias */
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: g101evn010 {
+ clock-frequency = <68930000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ max-frequency = <100000000>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ non-removable;
+ vmmc-supply = <®_3p3v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
+ MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
+ MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
+ MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* MCK */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 /* PHY_EN */
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ /* I2C3 */
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+
+ /* Headphone Detect */
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0001b0b0 /* HPDET_IRQ# */
+ MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0001b0b0 /* HPDET_MIC# */
+
+ /* Codec */
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0001b0b0 /* CODEC_RST# */
+
+ /* Touch Controller */
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* TOUCH_IRQ# */
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b0b0 /* TOUCH_RST */
+
+ /* Stow Sensor */
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b0b0 /* ACCEL_IRQ2 */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b0b0 /* ACCEL_IRQ1 */
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b1 /* TXEN */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x4001b0b0 /* PWR_EN */
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x4001b0b0 /* EMMY_CFG2# */
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0001b0b0 /* EMMY_BTWAKE# */
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0001b0b0 /* EMMY_WFWAKE# */
+
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x100f9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x17059 /* CD */
+ MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170b9 /* CD */
+ MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170f9 /* CD */
+ MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
new file mode 100644
index 0000000..fd4b68b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -0,0 +1,641 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_1p0v: regulator-1p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&fec>;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pca9555: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ dts1672: rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ /* VDD_SOC (1+R1/R2 = 1.635) */
+ reg_vdd_soc: sw1 {
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
+ reg_1p8v: sw2 {
+ regulator-name = "vdd1p8";
+ regulator-min-microvolt = <1033310>;
+ regulator-max-microvolt = <2004000>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM (1+R1/R2 = 1.635) */
+ reg_vdd_arm: sw3 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR (1+R1/R2 = 2.105) */
+ reg_vdd_ddr: sw4 {
+ regulator-name = "vddddr";
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <1684000>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+ reg_2p5v: ldo2 {
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2490375>;
+ regulator-max-microvolt = <2490375>;
+ lltc,fb-voltage-divider = <487000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_HIGH (1+R1/R2 = 4.17) */
+ reg_3p0v: ldo4 {
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ egalax_ts: touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ non-removable;
+ vmmc-supply = <®_3p3v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* PMIC_IRQ# */
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 55bebfc..56d0c5d 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -48,6 +48,13 @@
reg = <0x10000000 0x80000000>;
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 100000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@@ -136,6 +143,12 @@
status = "okay";
};
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
@@ -246,6 +259,12 @@
>;
};
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 63bf95e..58055ce 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -548,6 +548,18 @@
status = "okay";
};
+®_arm {
+ vin-supply = <&sw1a_reg>;
+};
+
+®_pu {
+ vin-supply = <&sw1c_reg>;
+};
+
+®_soc {
+ vin-supply = <&sw1c_reg>;
+};
+
&snvs_poweroff {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
new file mode 100644
index 0000000..5d94b5e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -0,0 +1,932 @@
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio1;
+ };
+
+ mdio1: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio1>;
+ gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
+ &gpio6 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_28p0v: regulator-28p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "28V_IN";
+ regulator-min-microvolt = <28000000>;
+ regulator-max-microvolt = <28000000>;
+ regulator-always-on;
+ };
+
+ reg_12p0v: regulator-12p0v {
+ compatible = "regulator-fixed";
+ vin-supply = <®_28p0v>;
+ regulator-name = "12V_MAIN";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v_main: regulator-5p0v-main {
+ compatible = "regulator-fixed";
+ vin-supply = <®_12p0v>;
+ regulator-name = "5V_MAIN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v_user_usb: regulator-5p0v-user-usb {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_user_usb>;
+ vin-supply = <®_5p0v_main>;
+ regulator-name = "5V_USER_USB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <1000>;
+ };
+
+ reg_3p3v_pmic: regulator-3p3v-pmic {
+ compatible = "regulator-fixed";
+ vin-supply = <®_12p0v>;
+ regulator-name = "PMIC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ vin-supply = <®_3p3v_pmic>;
+ regulator-name = "GEN_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v_sd: regulator-3p3v-sd {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_3p3v_sd>;
+ vin-supply = <®_3p3v>;
+ regulator-name = "3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <1000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_3p3v_display: regulator-3p3v-display {
+ compatible = "regulator-fixed";
+ vin-supply = <®_12p0v>;
+ regulator-name = "3V3_DISPLAY";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v_ssd: regulator-3p3v-ssd {
+ compatible = "regulator-fixed";
+ vin-supply = <®_12p0v>;
+ regulator-name = "3V3_SSD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sound1 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Front";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound1_codec>;
+ simple-audio-card,frame-master = <&sound1_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLEFT",
+ "Headphone Jack", "HPRIGHT",
+ "LEFTIN", "HPL",
+ "RIGHTIN", "HPR";
+ simple-audio-card,aux-devs = <&hpa1>;
+
+ sound1_cpu: simple-audio-card,cpu {
+ sound-dai = <&ssi2>;
+ };
+
+ sound1_codec: simple-audio-card,codec {
+ sound-dai = <&codec1>;
+ clocks = <&cs2000>;
+ };
+ };
+
+ sound2 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Back";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound2_codec>;
+ simple-audio-card,frame-master = <&sound2_codec>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLEFT",
+ "Headphone Jack", "HPRIGHT",
+ "LEFTIN", "HPL",
+ "RIGHTIN", "HPR";
+ simple-audio-card,aux-devs = <&hpa2>;
+
+ sound2_cpu: simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ sound2_codec: simple-audio-card,codec {
+ sound-dai = <&codec2>;
+ clocks = <&cs2000>;
+ };
+ };
+
+ panel {
+ power-supply = <®_3p3v_display>;
+ status = "disabled";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ disp0: disp0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ disp0_in_0: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ disp0_out: endpoint {
+ remote-endpoint = <&tc358767_in>;
+ };
+ };
+ };
+
+ cs2000_ref: cs2000-ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ cs2000_in_dummy: cs2000-in-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ edp_refclk: edp-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+};
+
+®_arm {
+ vin-supply = <&sw1a_reg>;
+};
+
+®_pu {
+ vin-supply = <&sw1c_reg>;
+};
+
+®_soc {
+ vin-supply = <&sw1c_reg>;
+};
+
+&ldb {
+ lvds-channel@0 {
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "st,m25p128", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ codec2: codec@18 {
+ compatible = "ti,tlv320dac3100";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec2>;
+ reg = <0x18>;
+ #sound-dai-cells = <0>;
+ HPVDD-supply = <®_3p3v>;
+ SPRVDD-supply = <®_3p3v>;
+ SPLVDD-supply = <®_3p3v>;
+ AVDD-supply = <®_3p3v>;
+ IOVDD-supply = <®_3p3v>;
+ DVDD-supply = <&vgen4_reg>;
+ gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ accel@1c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ compatible = "fsl,mma8451";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio1>;
+ interrupt-names = "int1", "int2";
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ hpa2: amp@60 {
+ compatible = "ti,tpa6130a2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpa2>;
+ reg = <0x60>;
+ power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ Vdd-supply = <®_5p0v_main>;
+ };
+
+ edp-bridge@68 {
+ compatible = "toshiba,tc358767";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tc358767>;
+ reg = <0x68>;
+ shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ clock-names = "ref";
+ clocks = <&edp_refclk>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ tc358767_in: endpoint {
+ remote-endpoint = <&disp0_out>;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ pmic@08 {
+ compatible = "fsl,pfuze100";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pfuze100_irq>;
+ reg = <0x08>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ temp-sense@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ cs2000: clkgen@4e {
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4e>;
+ #clock-cells = <0>;
+ clock-names = "clk_in", "ref_clk";
+ clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24000000>;
+ };
+
+ eeprom@54 {
+ compatible = "at,24c128";
+ reg = <0x54>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1341";
+ reg = <0x68>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ codec1: codec@18 {
+ compatible = "ti,tlv320dac3100";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec1>;
+ reg = <0x18>;
+ #sound-dai-cells = <0>;
+ HPVDD-supply = <®_3p3v>;
+ SPRVDD-supply = <®_3p3v>;
+ SPLVDD-supply = <®_3p3v>;
+ AVDD-supply = <®_3p3v>;
+ IOVDD-supply = <®_3p3v>;
+ DVDD-supply = <&vgen4_reg>;
+ gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <®_5p0v_main>;
+ vio-supply = <®_3p3v>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-y;
+ touchscreen-swapped-x-y;
+ syna,sensor-type = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ touchscreen-inverted-y;
+ touchscreen-swapped-x-y;
+ syna,sensor-type = <1>;
+ };
+ };
+
+ hpa1: amp@60 {
+ compatible = "ti,tpa6130a2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpa1>;
+ reg = <0x60>;
+ power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ Vdd-supply = <®_5p0v_main>;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&disp0_in_0>;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <®_3p3v_sd>;
+ vqmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <®_3p3v_sd>;
+ vqmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ non-removable;
+ status = "okay";
+};
+
+&sata {
+ target-supply = <®_3p3v_ssd>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <100>;
+ phy-supply = <®_3p3v>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&usbh1 {
+ vbus-supply = <®_5p0v_main>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_5p0v_user_usb>;
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ aud3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ >;
+ };
+
+ ssi2 {
+ fsl,audmux-port = <1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+ >;
+ };
+
+ aud5 {
+ fsl,audmux-port = <4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+ >;
+ };
+};
+
+&iomuxc {
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0
+ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_codec1: dac1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x40000038
+ >;
+ };
+
+ pinctrl_codec2: dac2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x40000038
+ >;
+ };
+
+ pinctrl_disp0: disp0grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f9
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f9
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f9
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f9
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f9
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f9
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f9
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f9
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f9
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f9
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f9
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f9
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f9
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f9
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f9
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f9
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f9
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f9
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f9
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f9
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f9
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f9
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f9
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f9
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f9
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f9
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f9
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x000b1
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b1
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x100f5
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x100f5
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x100c0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x100c0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x100f5
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x100f5
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x40010040
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_mdio1: bitbangmdiogrp {
+ fsl,pins = <
+ /* Bitbang MDIO for DEB Switch */
+ MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x4001b030
+ MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40018830
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x10038
+ >;
+ };
+
+ pinctrl_pfuze100_irq: pfuze100grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x40010000
+ >;
+ };
+
+ pinctrl_reg_3p3v_sd: mmcsupply1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x858
+ >;
+ };
+
+ pinctrl_reg_user_usb: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x40000038
+ >;
+ };
+
+ pinctrl_rmii_phy_irq: phygrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000
+ >;
+ };
+
+ pinctrl_tc358767: tc358767grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x10
+ >;
+ };
+
+ pinctrl_tpa1: tpa6130-1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x40000038
+ >;
+ };
+
+ pinctrl_tpa2: tpa6130-2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x40000038
+ >;
+ };
+
+ pinctrl_ts: tsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x10059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10069
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040
+
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x1b0b1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 6d7bf64..e426faa 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -197,7 +197,7 @@
arm,shared-override;
};
- pcie: pcie@0x01000000 {
+ pcie: pcie@1ffc000 {
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
reg = <0x01ffc000 0x04000>,
<0x01f00000 0x80000>;
@@ -205,6 +205,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
new file mode 100644
index 0000000..011726c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_SOM2 Board";
+ compatible = "boundary,imx6qp-nitrogen6_som2", "fsl,imx6qp";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index b234580..a8a5004 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,8 @@
compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
};
-&cpu0 {
- arm-supply = <&sw2_reg>;
+®_arm {
+ vin-supply = <&sw2_reg>;
};
&iomuxc {
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
new file mode 100644
index 0000000..882b3bd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <imx6qp.dtsi>
+#include <imx6qdl-zii-rdu2.dtsi>
+
+/ {
+ model = "ZII RDU2+ Board";
+ compatible = "zii,imx6qp-zii-rdu2", "fsl,imx6qp";
+};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 24d071f..59453f2 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -56,40 +56,59 @@
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
- ipu1: ipu@02400000 {
- compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
- clocks = <&clks IMX6QDL_CLK_IPU1>,
- <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>,
- <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
- <&clks IMX6QDL_CLK_PRG0_APB>;
- clock-names = "bus",
- "di0", "di1",
- "di0_sel", "di1_sel",
- "ldb_di0", "ldb_di1", "prg";
- };
-
- ipu2: ipu@02800000 {
- compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
- clocks = <&clks IMX6QDL_CLK_IPU2>,
- <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>,
- <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
- <&clks IMX6QDL_CLK_PRG1_APB>;
- clock-names = "bus",
- "di0", "di1",
- "di0_sel", "di1_sel",
- "ldb_di0", "ldb_di1", "prg";
- };
-
- pcie: pcie@0x01000000 {
- compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
- };
-
aips-bus@02100000 {
- mmdc0: mmdc@021b0000 { /* MMDC0 */
- compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
- reg = <0x021b0000 0x4000>;
+ pre1: pre@21c8000 {
+ compatible = "fsl,imx6qp-pre";
+ reg = <0x021c8000 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clks IMX6QDL_CLK_PRE0>;
+ clock-names = "axi";
+ fsl,iram = <&ocram2>;
+ };
+
+ pre2: pre@21c9000 {
+ compatible = "fsl,imx6qp-pre";
+ reg = <0x021c9000 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clks IMX6QDL_CLK_PRE1>;
+ clock-names = "axi";
+ fsl,iram = <&ocram2>;
+ };
+
+ pre3: pre@21ca000 {
+ compatible = "fsl,imx6qp-pre";
+ reg = <0x021ca000 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clks IMX6QDL_CLK_PRE2>;
+ clock-names = "axi";
+ fsl,iram = <&ocram3>;
+ };
+
+ pre4: pre@21cb000 {
+ compatible = "fsl,imx6qp-pre";
+ reg = <0x021cb000 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clks IMX6QDL_CLK_PRE3>;
+ clock-names = "axi";
+ fsl,iram = <&ocram3>;
+ };
+
+ prg1: prg@21cc000 {
+ compatible = "fsl,imx6qp-prg";
+ reg = <0x021cc000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
+ <&clks IMX6QDL_CLK_PRG0_AXI>;
+ clock-names = "ipg", "axi";
+ fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+ };
+
+ prg2: prg@21cd000 {
+ compatible = "fsl,imx6qp-prg";
+ reg = <0x021cd000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRG1_APB>,
+ <&clks IMX6QDL_CLK_PRG1_AXI>;
+ clock-names = "ipg", "axi";
+ fsl,pres = <&pre4>, <&pre2>, <&pre3>;
};
};
};
@@ -101,6 +120,16 @@
<0 119 IRQ_TYPE_LEVEL_HIGH>;
};
+&ipu1 {
+ compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+ fsl,prg = <&prg1>;
+};
+
+&ipu2 {
+ compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+ fsl,prg = <&prg2>;
+};
+
&ldb {
clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
@@ -110,3 +139,11 @@
"di0_sel", "di1_sel", "di2_sel", "di3_sel",
"di0", "di1";
};
+
+&mmdc0 {
+ compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
+};
+
+&pcie {
+ compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index dd4ec85..3f1416b 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -297,7 +297,8 @@
};
uart1: serial@02020000 {
- compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sx-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
@@ -1053,7 +1054,8 @@
};
uart2: serial@021e8000 {
- compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sx-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
@@ -1065,7 +1067,8 @@
};
uart3: serial@021ec000 {
- compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sx-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
@@ -1077,7 +1080,8 @@
};
uart4: serial@021f0000 {
- compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sx-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
@@ -1089,7 +1093,8 @@
};
uart5: serial@021f4000 {
- compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sx-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
@@ -1229,7 +1234,8 @@
};
uart6: serial@022a0000 {
- compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sx-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x022a0000 0x4000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_UART_IPG>,
@@ -1281,7 +1287,7 @@
};
};
- pcie: pcie@0x08000000 {
+ pcie: pcie@8ffc000 {
compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
reg = <0x08ffc000 0x4000>; /* DBI */
#address-cells = <3>;
@@ -1293,6 +1299,7 @@
0x81000000 0 0 0x08f80000 0 0x00010000
/* non-prefetchable memory */
0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
+ bus-range = <0x00 0xff>;
num-lanes = <1>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index 00f98e5..f18e1f1 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -85,11 +85,6 @@
assigned-clock-rates = <786432000>;
};
-&cpu0 {
- arm-supply = <®_arm>;
- soc-supply = <®_soc>;
-};
-
&i2c2 {
clock_frequency = <100000>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi
index 940aef6..eb94d95 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dtsi
+++ b/arch/arm/boot/dts/imx6ul-geam.dtsi
@@ -49,6 +49,23 @@
reg = <0x80000000 0x08000000>;
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm8 0 100000>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <100>;
+ };
+
chosen {
stdout-path = &uart1;
};
@@ -143,12 +160,24 @@
display = <&display0>;
};
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
};
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -290,6 +319,12 @@
>;
};
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
+ >;
+ };
+
pinctrl_tsc: tscgrp {
fsl,pin = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
@@ -299,6 +334,16 @@
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
+ MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
new file mode 100644
index 0000000..2beaab6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c1 {
+ stmpe811: gpio-expander@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ stmpe: touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <28000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <30>;
+ hback-porch = <30>;
+ hsync-len = <64>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ vsync-len = <20>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
index f5b4228..73a1d0f 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
@@ -43,6 +43,7 @@
/dts-v1/;
#include "imx6ul-isiot.dtsi"
+#include "imx6ul-isiot-common.dtsi"
/ {
model = "Engicam Is.IoT MX6UL eMMC Starter kit";
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
index de15e1c..da29a86 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
@@ -43,6 +43,7 @@
/dts-v1/;
#include "imx6ul-isiot.dtsi"
+#include "imx6ul-isiot-common.dtsi"
/ {
model = "Engicam Is.IoT MX6UL NAND Starter kit";
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index 0b43699..ea30380 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -52,6 +52,49 @@
chosen {
stdout-path = &uart1;
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm8 0 100000>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <100>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
};
&uart1 {
@@ -72,6 +115,36 @@
};
&iomuxc {
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
+ MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 373ee19..18bebd6 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -44,11 +44,39 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ panel: panel {
+ compatible = "edt,et057090dhu";
+ backlight = <&bl>;
+ power-supply = <®_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lcdif_out>;
+ };
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
};
&bl {
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
+ power-supply = <®_3v3>;
+
status = "okay";
};
@@ -75,32 +103,11 @@
};
&lcdif {
- display = <&display0>;
status = "okay";
- display0: lcd-display {
- bits-per-pixel = <16>;
- bus-width = <18>;
-
- display-timings {
- native-mode = <&timing_vga>;
-
- /* Standard VGA timing */
- timing_vga: 640x480 {
- clock-frequency = <25175000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <40>;
- hfront-porch = <24>;
- vback-porch = <32>;
- vfront-porch = <11>;
- hsync-len = <96>;
- vsync-len = <2>;
- de-active = <1>;
- hsync-active = <0>;
- vsync-active = <0>;
- pixelclk-active = <0>;
- };
+ port {
+ lcdif_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index a171545..2d87489 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -60,13 +60,6 @@
regulator-max-microvolt = <3300000>;
};
- reg_vref_1v8: regulator-vref-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "vref-1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "imx7-sgtl5000";
@@ -85,11 +78,11 @@
};
&adc1 {
- vref-supply = <®_vref_1v8>;
+ vref-supply = <®_DCDC3>;
};
&adc2 {
- vref-supply = <®_vref_1v8>;
+ vref-supply = <®_DCDC3>;
};
&cpu0 {
@@ -151,29 +144,29 @@
regulators {
reg_DCDC1: DCDC1 { /* V1.0_SOC */
- regulator-min-microvolt = <975000>;
- regulator-max-microvolt = <1125000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
reg_DCDC2: DCDC2 { /* V1.1_ARM */
- regulator-min-microvolt = <975000>;
- regulator-max-microvolt = <1125000>;
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
reg_DCDC3: DCDC3 { /* V1.8 */
- regulator-min-microvolt = <1775000>;
- regulator-max-microvolt = <1825000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_DCDC4: DCDC4 { /* V1.35_DRAM */
- regulator-min-microvolt = <1325000>;
- regulator-max-microvolt = <1375000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
@@ -181,33 +174,33 @@
reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ regulator-boot-on;
};
reg_LDO2: LDO2 { /* +V1.8_SD */
- regulator-min-microvolt = <1775000>;
- regulator-max-microvolt = <3325000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
- regulator-min-microvolt = <3275000>;
- regulator-max-microvolt = <3325000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_LDO4: LDO4 { /* V1.8_LPSR */
- regulator-min-microvolt = <1775000>;
- regulator-max-microvolt = <1825000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
- regulator-min-microvolt = <1775000>;
- regulator-max-microvolt = <1825000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
index bd01d2c..a608a14 100644
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -57,6 +57,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ vin-supply = <®_5v0>;
};
};
diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/imx7d-sdb-sht11.dts
new file mode 100644
index 0000000..64a20ed
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sdb-sht11.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7d-sdb.dts"
+
+/ {
+ sensor {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sensor>;
+ compatible = "sensirion,sht15";
+ clk-gpios = <&gpio4 12 0>;
+ data-gpios = <&gpio4 13 0>;
+ vcc-supply = <®_sht15>;
+ };
+
+ reg_sht15: regulator-sht15 {
+ compatible = "regulator-fixed";
+ regulator-name = "reg_sht15";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_sensor: sensorgrp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x4000007f
+ MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x4000007f
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 5d3a43b..c4f12fd 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -493,10 +493,9 @@
};
ocotp: ocotp-ctrl@30350000 {
- compatible = "syscon";
+ compatible = "fsl,imx7d-ocotp", "syscon";
reg = <0x30350000 0x10000>;
- clocks = <&clks IMX7D_CLK_DUMMY>;
- status = "disabled";
+ clocks = <&clks IMX7D_OCOTP_CLK>;
};
anatop: anatop@30360000 {
@@ -559,7 +558,7 @@
};
src: src@30390000 {
- compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+ compatible = "fsl,imx7d-src", "syscon";
reg = <0x30390000 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
diff --git a/arch/arm/boot/dts/include/arm b/arch/arm/boot/dts/include/arm
new file mode 120000
index 0000000..a96aa0e
--- /dev/null
+++ b/arch/arm/boot/dts/include/arm
@@ -0,0 +1 @@
+..
\ No newline at end of file
diff --git a/arch/arm/boot/dts/include/arm64 b/arch/arm/boot/dts/include/arm64
new file mode 120000
index 0000000..074a835
--- /dev/null
+++ b/arch/arm/boot/dts/include/arm64
@@ -0,0 +1 @@
+../../../../arm64/boot/dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 45619f6..ebc763e 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -106,6 +106,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_cbus 0 0 120>;
};
spi_nor_pins: nor {
@@ -148,6 +149,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 120 16>;
};
uart_ao_a_pins: uart_ao_a {
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 41fd536..828aa49 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -198,6 +198,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_cbus 0 0 130>;
};
};
@@ -215,6 +216,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 130 16>;
};
uart_ao_a_pins: uart_ao_a {
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
new file mode 100644
index 0000000..f5aeb39
--- /dev/null
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -0,0 +1,243 @@
+/*
+ * Common CPCAP configuration used on Motorola phones
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&mcspi1 {
+ cpcap: pmic@0 {
+ compatible = "motorola,cpcap", "st,6556002";
+ reg = <0>; /* cs0 */
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <3000000>;
+ spi-cs-high;
+
+ cpcap_adc: adc {
+ compatible = "motorola,mapphone-cpcap-adc";
+ interrupts-extended = <&cpcap 8 0>;
+ interrupt-names = "adcdone";
+ #io-channel-cells = <1>;
+ };
+
+ cpcap_charger: charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+ interrupts-extended = <
+ &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+ &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+ >;
+ interrupt-names =
+ "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+ "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+ &gpio3 23 GPIO_ACTIVE_LOW>;
+ io-channels = <&cpcap_adc 0 &cpcap_adc 1
+ &cpcap_adc 2 &cpcap_adc 5
+ &cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+ };
+
+ cpcap_regulator: regulator {
+ compatible = "motorola,mapphone-cpcap-regulator";
+
+ cpcap_regulators: regulators {
+ };
+ };
+
+ cpcap_rtc: rtc {
+ compatible = "motorola,cpcap-rtc";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
+ };
+
+ power_button: button {
+ compatible = "motorola,cpcap-pwrbutton";
+
+ interrupts = <23 IRQ_TYPE_NONE>;
+ };
+
+ cpcap_usb2_phy: phy {
+ compatible = "motorola,mapphone-cpcap-usb-phy";
+ pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ #phy-cells = <0>;
+ interrupts-extended = <
+ &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+ &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+ &cpcap 48 1
+ >;
+ interrupt-names =
+ "id_ground", "id_float", "se0conn", "vbusvld",
+ "sessvld", "sessend", "se1", "dm", "dp";
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+ &gpio1 0 GPIO_ACTIVE_HIGH>;
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+ vusb-supply = <&vusb>;
+ };
+
+ led_red: led-red {
+ compatible = "motorola,cpcap-led-red";
+ vdd-supply = <&sw5>;
+ label = "status-led:red";
+ };
+
+ led_green: led-green {
+ compatible = "motorola,cpcap-led-green";
+ vdd-supply = <&sw5>;
+ label = "status-led:green";
+ };
+
+ led_blue: led-blue {
+ compatible = "motorola,cpcap-led-blue";
+ vdd-supply = <&sw5>;
+ label = "status-led:blue";
+ };
+
+ led_adl: led-adl {
+ compatible = "motorola,cpcap-led-adl";
+ vdd-supply = <&sw5>;
+ label = "button-backlight";
+ };
+
+ led_cp: led-cp {
+ compatible = "motorola,cpcap-led-cp";
+ vdd-supply = <&sw5>;
+ label = "shift-key-light";
+ };
+ };
+};
+
+&cpcap_regulators {
+ sw5: SW5 {
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ regulator-enable-ramp-delay = <50000>;
+ regulator-boot-on;
+ };
+
+ vcam: VCAM {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ /* Used by DSS */
+ vcsi: VCSI {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-boot-on;
+ };
+
+ vdac: VDAC {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vdig: VDIG {
+ regulator-min-microvolt = <1875000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vfuse: VFUSE {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vhvio: VHVIO {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ };
+
+ /* Used by eMMC at mmc2 */
+ vsdio: VSDIO {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vpll: VPLL {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <100>;
+ };
+
+ vrf1: VRF1 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vrf2: VRF2 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vrfref: VRFREF {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <100>;
+ };
+
+ vwlan1: VWLAN1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ /* Used by micro-SDIO at mmc1 */
+ vwlan2: VWLAN2 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vsim: VSIM {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vsimcard: VSIMCARD {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vvib: VVIB {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ vusb: VUSB {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vaudio: VAUDIO {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+};
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index 10d088d..4a962a2 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -6,7 +6,7 @@
*/
/dts-v1/;
-/include/ "moxart.dtsi"
+#include "moxart.dtsi"
/ {
model = "MOXA UC-7112-LX";
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index 1fd27ed..e86f8c9 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -6,6 +6,7 @@
*/
/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "moxa,moxart";
@@ -36,8 +37,8 @@
ranges;
intc: interrupt-controller@98800000 {
- compatible = "moxa,moxart-ic";
- reg = <0x98800000 0x38>;
+ compatible = "moxa,moxart-ic", "faraday,ftintc010";
+ reg = <0x98800000 0x100>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-mask = <0x00080000>;
@@ -59,15 +60,15 @@
timer: timer@98400000 {
compatible = "moxa,moxart-timer";
reg = <0x98400000 0x42>;
- interrupts = <19 1>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
clocks = <&clk_apb>;
};
gpio: gpio@98700000 {
gpio-controller;
#gpio-cells = <2>;
- compatible = "moxa,moxart-gpio";
- reg = <0x98700000 0xC>;
+ compatible = "moxa,moxart-gpio", "faraday,ftgpio010";
+ reg = <0x98700000 0x100>;
};
rtc: rtc {
@@ -80,7 +81,7 @@
dma: dma@90500000 {
compatible = "moxa,moxart-dma";
reg = <0x90500080 0x40>;
- interrupts = <24 0>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
};
@@ -93,7 +94,7 @@
sdhci: sdhci@98e00000 {
compatible = "moxa,moxart-sdhci";
reg = <0x98e00000 0x5C>;
- interrupts = <5 0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_apb>;
dmas = <&dma 5>,
<&dma 5>;
@@ -120,7 +121,7 @@
mac0: mac@90900000 {
compatible = "moxa,moxart-mac";
reg = <0x90900000 0x90>;
- interrupts = <25 0>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
phy-handle = <ðphy0>;
phy-mode = "mii";
status = "disabled";
@@ -129,7 +130,7 @@
mac1: mac@92000000 {
compatible = "moxa,moxart-mac";
reg = <0x92000000 0x90>;
- interrupts = <27 0>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
phy-handle = <ðphy1>;
phy-mode = "mii";
status = "disabled";
@@ -138,7 +139,7 @@
uart0: uart@98200000 {
compatible = "ns16550a";
reg = <0x98200000 0x20>;
- interrupts = <31 8>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <14745600>;
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
new file mode 100644
index 0000000..235ecfd
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Device Tree Source for OMAP3 SoC CPU thermal
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ coefficients = <0 20000>;
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 0>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index e268efd..4ad7d55 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -37,6 +37,13 @@
};
&omap3_pmx_core {
+ gpmc_pins: pinmux_gpmc_pins {
+ pinctrl-single,pins = <
+ /* OneNAND seems to require PIN_INPUT on clock. */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
@@ -98,6 +105,9 @@
};
&gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
@@ -126,6 +136,48 @@
#address-cells = <1>;
#size-cells = <1>;
+
+ status = "okay";
+ };
+
+ onenand@0,0 {
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,burst-write;
+ gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+ gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <87>;
+ gpmc,cs-wr-off-ns = <87>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <15>;
+ gpmc,oe-off-ns = <87>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <87>;
+ gpmc,rd-cycle-ns = <112>;
+ gpmc,wr-cycle-ns = <112>;
+ gpmc,access-ns = <81>;
+ gpmc,page-burst-access-ns = <15>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <5>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+ gpmc,wr-access-ns = <81>;
+ gpmc,sync-clk-ps = <15000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b64cfda..49f3708 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -155,6 +155,13 @@
compatible = "nokia,n900-ir";
pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
};
+
+ /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
+ vctcxo: vctcxo {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
};
&omap3_pmx_core {
@@ -162,8 +169,10 @@
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
>;
};
@@ -920,6 +929,8 @@
interrupt-parent = <&gpio2>;
interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+ clocks = <&vctcxo>;
};
};
@@ -937,9 +948,17 @@
};
&uart2 {
- interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+
+ bcm2048: bluetooth {
+ compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
+ reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
+ host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+ bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+ clocks = <&vctcxo>;
+ clock-names = "sysclk";
+ };
};
&uart3 {
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 5d8c4b4..df3366f 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -58,6 +58,13 @@
pinctrl-0 = <&debug_leds>;
};
};
+
+ /* controlled (enabled/disabled) directly by wl1271 */
+ vctcxo: vctcxo {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
};
&omap3_pmx_core {
@@ -125,6 +132,15 @@
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */
>;
};
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
+ >;
+ };
};
&omap3_pmx_core2 {
@@ -435,3 +451,19 @@
&ssi_port2 {
status = "disabled";
};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+
+ bluetooth {
+ compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
+
+ reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */
+ host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+ bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+
+ clocks = <&vctcxo>;
+ clock-names = "sysclk";
+ };
+};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 834fdf1..ac4f879 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -14,7 +14,7 @@
/ {
cpus {
- cpu@0 {
+ cpu: cpu@0 {
/* OMAP343x/OMAP35xx variants OPP1-5 */
operating-points = <
/* kHz uV */
@@ -56,12 +56,16 @@
};
};
- bandgap@48002524 {
+ bandgap: bandgap@48002524 {
reg = <0x48002524 0x4>;
compatible = "ti,omap34xx-bandgap";
#thermal-sensor-cells = <0>;
};
};
+
+ thermal_zones: thermal-zones {
+ #include "omap3-cpu-thermal.dtsi"
+ };
};
&ssi {
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index d1a3e56..ade31d7 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -19,7 +19,7 @@
cpus {
/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
- cpu@0 {
+ cpu: cpu@0 {
operating-points = <
/* kHz uV */
300000 1012500
@@ -88,12 +88,16 @@
};
};
- bandgap@48002524 {
+ bandgap: bandgap@48002524 {
reg = <0x48002524 0x4>;
compatible = "ti,omap36xx-bandgap";
#thermal-sensor-cells = <0>;
};
};
+
+ thermal_zones: thermal-zones {
+ #include "omap3-cpu-thermal.dtsi"
+ };
};
/* OMAP3630 needs dss_96m_fck for VENC */
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index f3ccb4c..89eb607 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -5,7 +5,9 @@
*/
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "omap443x.dtsi"
+#include "motorola-cpcap-mapphone.dtsi"
/ {
model = "Motorola Droid 4 XT894";
@@ -15,35 +17,76 @@
stdout-path = &uart3;
};
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
+
/*
* We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
- * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes
- * below about SRAM and L3_ICLK2 being unused by default,
+ * then 1023 - 1024 seems to contain mbm.
*/
memory {
device_type = "memory";
reg = <0x80000000 0x3fd00000>; /* 1021 MB */
};
- /* CPCAP really supports 1650000 to 3400000 range */
- vmmc: regulator-mmc {
+ /* Poweroff GPIO probably connected to CPCAP */
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&poweroff_gpio>;
+ pinctrl-names = "default";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ pinctrl-0 = <&hdmi_hpd_gpio>;
+ pinctrl-names = "default";
+ label = "hdmi";
+ type = "d";
+
+ hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
+ /*
+ * HDMI 5V regulator probably sourced from battery. Let's keep
+ * keep this as always enabled for HDMI to work until we've
+ * figured what the encoder chip is.
+ */
+ hdmi_regulator: regulator-hdmi {
compatible = "regulator-fixed";
- regulator-name = "vmmc";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-name = "hdmi";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */
+ enable-active-high;
regulator-always-on;
};
- /* CPCAP really supports 3000000 to 3100000 range */
- vemmc: regulator-emmc {
- compatible = "regulator-fixed";
- regulator-name = "vemmc";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
};
- /* CPCAP really supports 1650000 to 1950000 range */
+ /* LCD regulator from sw5 source */
+ lcd_regulator: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd";
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
+ enable-active-high;
+ vin-supply = <&sw5>;
+ };
+
+ /* This is probably coming straight from the battery.. */
wl12xx_vmmc: regulator-wl12xx {
compatible = "regulator-fixed";
regulator-name = "vwl1271";
@@ -53,21 +96,195 @@
startup-delay-us = <70000>;
enable-active-high;
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ volume_down {
+ label = "Volume Down";
+ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
+ linux,code = <KEY_VOLUMEDOWN>;
+ linux,can-disable;
+ };
+
+ slider {
+ label = "Keypad Slide";
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ linux,can-disable;
+
+ };
+ };
};
-/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
-&gpmc {
- status = "disabled";
+&dss {
+ status = "okay";
+};
+
+&gpio6 {
+ touchscreen_reset {
+ gpio-hog;
+ gpios = <13 0>;
+ output-high;
+ line-name = "touchscreen-reset";
+ };
+};
+
+&dsi1 {
+ status = "okay";
+ vdd-supply = <&vcsi>;
+
+ port {
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd0: display {
+ compatible = "panel-dsi-cm";
+ label = "lcd0";
+ vddi-supply = <&lcd_regulator>;
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+
+ panel-timing {
+ clock-frequency = <0>; /* Calculated by dsi */
+
+ hback-porch = <2>;
+ hactive = <540>;
+ hfront-porch = <0>;
+ hsync-len = <2>;
+
+ vback-porch = <1>;
+ vactive = <960>;
+ vfront-porch = <0>;
+ vsync-len = <1>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+ };
+};
+
+&hdmi {
+ status = "okay";
+ pinctrl-0 = <&dss_hdmi_pins>;
+ pinctrl-names = "default";
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ lanes = <1 0 3 2 5 4 7 6>;
+ };
+ };
+};
+
+&i2c1 {
+ tmp105@48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ pinctrl-0 = <&tmp105_irq>;
+ pinctrl-names = "default";
+ /* kpd_row0.gpio_178 */
+ interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
+ &omap4_pmx_core 0x14e>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <
+
+ /* Row 1 */
+ MATRIX_KEY(0, 2, KEY_1)
+ MATRIX_KEY(0, 6, KEY_2)
+ MATRIX_KEY(2, 3, KEY_3)
+ MATRIX_KEY(0, 7, KEY_4)
+ MATRIX_KEY(0, 4, KEY_5)
+ MATRIX_KEY(5, 5, KEY_6)
+ MATRIX_KEY(0, 1, KEY_7)
+ MATRIX_KEY(0, 5, KEY_8)
+ MATRIX_KEY(0, 0, KEY_9)
+ MATRIX_KEY(1, 6, KEY_0)
+
+ /* Row 2 */
+ MATRIX_KEY(3, 4, KEY_APOSTROPHE)
+ MATRIX_KEY(7, 6, KEY_Q)
+ MATRIX_KEY(7, 7, KEY_W)
+ MATRIX_KEY(7, 2, KEY_E)
+ MATRIX_KEY(1, 0, KEY_R)
+ MATRIX_KEY(4, 4, KEY_T)
+ MATRIX_KEY(1, 2, KEY_Y)
+ MATRIX_KEY(6, 7, KEY_U)
+ MATRIX_KEY(2, 2, KEY_I)
+ MATRIX_KEY(5, 6, KEY_O)
+ MATRIX_KEY(3, 7, KEY_P)
+ MATRIX_KEY(6, 5, KEY_BACKSPACE)
+
+ /* Row 3 */
+ MATRIX_KEY(5, 4, KEY_TAB)
+ MATRIX_KEY(5, 7, KEY_A)
+ MATRIX_KEY(2, 7, KEY_S)
+ MATRIX_KEY(7, 0, KEY_D)
+ MATRIX_KEY(2, 6, KEY_F)
+ MATRIX_KEY(6, 2, KEY_G)
+ MATRIX_KEY(6, 6, KEY_H)
+ MATRIX_KEY(1, 4, KEY_J)
+ MATRIX_KEY(3, 1, KEY_K)
+ MATRIX_KEY(2, 1, KEY_L)
+ MATRIX_KEY(4, 6, KEY_ENTER)
+
+ /* Row 4 */
+ MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */
+ MATRIX_KEY(6, 1, KEY_Z)
+ MATRIX_KEY(7, 4, KEY_X)
+ MATRIX_KEY(5, 1, KEY_C)
+ MATRIX_KEY(1, 7, KEY_V)
+ MATRIX_KEY(2, 4, KEY_B)
+ MATRIX_KEY(4, 1, KEY_N)
+ MATRIX_KEY(1, 1, KEY_M)
+ MATRIX_KEY(3, 5, KEY_COMMA)
+ MATRIX_KEY(5, 2, KEY_DOT)
+ MATRIX_KEY(6, 3, KEY_UP)
+ MATRIX_KEY(7, 3, KEY_OK)
+
+ /* Row 5 */
+ MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */
+ MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */
+ MATRIX_KEY(6, 0, KEY_MINUS)
+ MATRIX_KEY(4, 7, KEY_EQUAL)
+ MATRIX_KEY(1, 5, KEY_SPACE)
+ MATRIX_KEY(3, 2, KEY_SLASH)
+ MATRIX_KEY(4, 3, KEY_LEFT)
+ MATRIX_KEY(5, 3, KEY_DOWN)
+ MATRIX_KEY(3, 3, KEY_RIGHT)
+
+ /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
+ MATRIX_KEY(5, 0, KEY_VOLUMEUP)
+ >;
};
&mmc1 {
- vmmc-supply = <&vmmc>;
+ vmmc-supply = <&vwlan2>;
bus-width = <4>;
- cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */
};
&mmc2 {
- vmmc-supply = <&vemmc>;
+ vmmc-supply = <&vsdio>;
bus-width = <8>;
non-removable;
};
@@ -93,12 +310,78 @@
};
};
-/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
-&ocmcram {
- status = "disabled";
+&i2c1 {
+ lm3532@38 {
+ compatible = "ti,lm3532";
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ backlight {
+ compatible = "ti,lm3532-backlight";
+
+ lcd {
+ led-sources = <0 1 2>;
+ ramp-up-msec = <1>;
+ ramp-down-msec = <0>;
+ };
+ };
+ };
+};
+
+/*
+ * REVISIT: Add gpio173 reset pin handling to the driver, see gpio-hog above.
+ * If the GPIO reset is used, we probably need to have /lib/firmware/maxtouch.fw
+ * available. See "mxt-app" and "droid4-touchscreen-firmware" tools for more
+ * information.
+ */
+&i2c2 {
+ tsp@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+
+ /* gpio_183 with sys_nirq2 pad as wakeup */
+ interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING
+ &omap4_pmx_core 0x160>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
};
&omap4_pmx_core {
+
+ /* hdmi_hpd.gpio_63 */
+ hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
+ >;
+ };
+
+ /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ /* gpmc_ncs0.gpio_50 */
+ poweroff_gpio: pinmux_poweroff_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ /* kpd_row0.gpio_178 */
+ tmp105_irq: pinmux_tmp105_irq {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
/* gpio_60 */
pinctrl-single,pins = <
@@ -106,6 +389,12 @@
>;
};
+ touchscreen_pins: pinmux_touchscreen_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
usb_ulpi_pins: pinmux_usb_ulpi_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x196, MUX_MODE7)
@@ -180,9 +469,49 @@
&omap4_pmx_core 0x17c>;
};
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
+&usbhshost {
+ port1-mode = "ohci-phy-4pin-dpdm";
+ port2-mode = "ehci-tll";
+};
+
/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
&usb_otg_hs {
interface-type = <1>;
mode = <3>;
power = <50>;
};
+
+&i2c4 {
+ ak8975: magnetometer@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+ rotation-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+
+ };
+
+ lis3dh: accelerometer@18 {
+ compatible = "st,lis3dh-accel";
+ reg = <0x18>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
+
+ rotation-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index fc6a861..03c8ad9 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -71,4 +71,8 @@
};
+&cpu_thermal {
+ coefficients = <0 20000>;
+};
+
/include/ "omap443x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index ef66e12..c43f2a2 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -90,4 +90,8 @@
};
+&cpu_thermal {
+ coefficients = <348 (-9301)>;
+};
+
/include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 222155c..eaff2a5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -1127,6 +1127,15 @@
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
+ coefficients = <65 (-1791)>;
};
/include/ "omap54xx-clocks.dtsi"
+
+&gpu_thermal {
+ coefficients = <117 (-2992)>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 39d9e6d..2da1413 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -95,17 +95,17 @@
function = "sdc1";
};
clk {
- pins = "gpio167"; /* SDC5 CLK */
+ pins = "gpio167"; /* SDC1 CLK */
drive-strength = <16>;
bias-disable;
};
cmd {
- pins = "gpio168"; /* SDC5 CMD */
+ pins = "gpio168"; /* SDC1 CMD */
drive-strength = <10>;
bias-pull-up;
};
data {
- /* SDC5 D0 to D7 */
+ /* SDC1 D0 to D7 */
pins = "gpio159", "gpio160", "gpio161", "gpio162",
"gpio163", "gpio164", "gpio165", "gpio166";
drive-strength = <10>;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 91c9a62..747669a 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -392,6 +392,21 @@
cap-mmc-highspeed;
};
+ sdcc2: sdcc@12140000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12140000 0x8000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <48000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ };
+
sdcc3: sdcc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -408,6 +423,21 @@
no-1-8-v;
};
+ sdcc4: sdcc@121c0000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x121c0000 0x8000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ };
+
sdcc5: sdcc@12200000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 96c853b..e7c1577 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -413,14 +413,6 @@
dma-controller@f9944000 {
qcom,controlled-remotely;
};
-
- usb-phy@f9a55000 {
- status = "ok";
- };
-
- usb@f9a55000 {
- status = "ok";
- };
};
&spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d3e1a61b..307bf6a 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -2,8 +2,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include "skeleton.dtsi"
/ {
@@ -67,7 +67,7 @@
#size-cells = <0>;
interrupts = <1 9 0xf04>;
- cpu@0 {
+ CPU0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
@@ -78,7 +78,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@1 {
+ CPU1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
@@ -89,7 +89,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@2 {
+ CPU2: cpu@2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
@@ -100,7 +100,7 @@
cpu-idle-states = <&CPU_SPC>;
};
- cpu@3 {
+ CPU3: cpu@3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
@@ -250,6 +250,9 @@
cx-supply = <&pm8841_s2>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
memory-region = <&adsp_region>;
qcom,smem-states = <&adsp_smp2p_out 0>;
@@ -695,42 +698,276 @@
qcom,ee = <0>;
};
- usb1_phy: usb-phy@f9a55000 {
- compatible = "qcom,usb-otg-snps";
+ etr@fc322000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0xfc322000 0x1000>;
- reg = <0xf9a55000 0x400>;
- interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>,
- <&spmi_bus 0 0x9 0 0>;
- interrupt-names = "core_irq", "async_irq", "pmic_id_irq";
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- vddcx-supply = <&pm8841_s2>;
- v3p3-supply = <&pm8941_l24>;
- v1p8-supply = <&pm8941_l6>;
-
- dr_mode = "otg";
- qcom,phy-init-sequence = <0x63 0x81 0xfffffff>;
- qcom,otg-control = <1>;
- qcom,phy-num = <0>;
-
- resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
- reset-names = "phy", "link";
-
- clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
- <&gcc GCC_USB_HS_AHB_CLK>;
- clock-names = "phy", "core", "iface";
-
- status = "disabled";
+ port {
+ etr_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
};
- usb@f9a55000 {
- compatible = "qcom,ci-hdrc";
- reg = <0xf9a55000 0x400>;
- dr_mode = "otg";
- interrupts = <0 134 0>, <0 140 0>;
- interrupt-names = "core_irq", "async_irq";
- usb-phy = <&usb1_phy>;
+ tpiu@fc318000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0xfc318000 0x1000>;
- status = "disabled";
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ replicator@fc31c000 {
+ compatible = "qcom,coresight-replicator1x", "arm,primecell";
+ reg = <0xfc31c000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etr_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port@2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf_out>;
+ };
+ };
+ };
+ };
+
+ etf@fc307000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0xfc307000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ etf_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ port@1 {
+ reg = <0>;
+ etf_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&merger_out>;
+ };
+ };
+ };
+ };
+
+ funnel@fc31b000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0xfc31b000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 0 - connected trought funnel to Audio, Modem and
+ * Resource and Power Manager CPU's
+ * 2...7 - not-connected
+ */
+ port@1 {
+ reg = <1>;
+ merger_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel1_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ merger_out: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
+ };
+
+ funnel@fc31a000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0xfc31a000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 0 - not-connected
+ * 1 - connected trought funnel to Multimedia CPU
+ * 2 - connected to Wireless CPU
+ * 3 - not-connected
+ * 4 - not-connected
+ * 6 - not-connected
+ * 7 - connected to STM
+ */
+ port@5 {
+ reg = <5>;
+ funnel1_in5: endpoint {
+ slave-mode;
+ remote-endpoint = <&kpss_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ funnel1_out: endpoint {
+ remote-endpoint = <&merger_in1>;
+ };
+ };
+ };
+ };
+
+ funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0xfc345000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ kpss_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ kpss_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ kpss_in2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ kpss_in3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ kpss_out: endpoint {
+ remote-endpoint = <&funnel1_in5>;
+ };
+ };
+ };
+ };
+
+ etm@fc33c000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0xfc33c000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&kpss_in0>;
+ };
+ };
+ };
+
+ etm@fc33d000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0xfc33d000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&kpss_in1>;
+ };
+ };
+ };
+
+ etm@fc33e000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0xfc33e000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&kpss_in2>;
+ };
+ };
+ };
+
+ etm@fc33f000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0xfc33f000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&kpss_in3>;
+ };
+ };
};
};
@@ -760,6 +997,11 @@
compatible = "qcom,rpm-msm8974";
qcom,smd-channels = "rpm_requests";
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
pm8841-regulators {
compatible = "qcom,rpm-pm8841-regulators";
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 118a8e2..52a7b58 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -44,6 +44,10 @@
clock-frequency = <48000000>;
};
+&rtc_x1_clk {
+ clock-frequency = <32768>;
+};
+
&mtu2 {
status = "okay";
};
@@ -59,6 +63,10 @@
};
};
+&rtc {
+ status = "okay";
+};
+
&scif2 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 02b59c5..72df20a 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -43,6 +43,10 @@
clock-frequency = <48000000>;
};
+&rtc_x1_clk {
+ clock-frequency = <32768>;
+};
+
&mtu2 {
status = "okay";
};
@@ -69,6 +73,10 @@
status = "okay";
};
+&rtc {
+ status = "okay";
+};
+
&scif2 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 1cf2bd0..0423996 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -51,6 +51,20 @@
clock-frequency = <0>;
};
+ rtc_x1_clk: rtc_x1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ /* If clk present, value must be set by board to 32678 */
+ clock-frequency = <0>;
+ };
+
+ rtc_x3_clk: rtc_x3 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ /* If clk present, value must be set by board to 4000000 */
+ clock-frequency = <0>;
+ };
+
/* Fixed factor clocks */
b_clk: b {
#clock-cells = <0>;
@@ -117,11 +131,20 @@
clock-output-names = "ostm0", "ostm1";
};
+ mstp6_clks: mstp6_clks@fcfe042c {
+ #clock-cells = <1>;
+ compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xfcfe042c 4>;
+ clocks = <&p0_clk>;
+ clock-indices = <R7S72100_CLK_RTC>;
+ clock-output-names = "rtc";
+ };
+
mstp7_clks: mstp7_clks@fcfe0430 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0430 4>;
- clocks = <&p0_clk>;
+ clocks = <&b_clk>;
clock-indices = <R7S72100_CLK_ETHER>;
clock-output-names = "ether";
};
@@ -162,9 +185,12 @@
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe0444 4>;
- clocks = <&p1_clk>, <&p1_clk>;
- clock-indices = <R7S72100_CLK_SDHI1 R7S72100_CLK_SDHI0>;
- clock-output-names = "sdhi1", "sdhi0";
+ clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+ clock-indices = <
+ R7S72100_CLK_SDHI00 R7S72100_CLK_SDHI01
+ R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
+ >;
+ clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11";
};
};
@@ -379,6 +405,13 @@
cache-level = <2>;
};
+ wdt: watchdog@fcfe0000 {
+ compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
+ reg = <0xfcfe0000 0x6>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&p0_clk>;
+ };
+
i2c0: i2c@fcfee000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -499,7 +532,10 @@
GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp12_clks R7S72100_CLK_SDHI0>;
+ clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
+ <&mstp12_clks R7S72100_CLK_SDHI01>;
+ clock-names = "core", "cd";
+ power-domains = <&cpg_clocks>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -512,7 +548,10 @@
GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp12_clks R7S72100_CLK_SDHI1>;
+ clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
+ <&mstp12_clks R7S72100_CLK_SDHI11>;
+ clock-names = "core", "cd";
+ power-domains = <&cpg_clocks>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -535,4 +574,18 @@
power-domains = <&cpg_clocks>;
status = "disabled";
};
+
+ rtc: rtc@fcff1000 {
+ compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
+ reg = <0xfcff1000 0x2e>;
+ interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 277 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 278 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "alarm", "period", "carry";
+ clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
+ <&rtc_x3_clk>, <&extal_clk>;
+ clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 00eb9a7..1f5c9f6 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -32,18 +32,16 @@
next-level-cache = <&L2_CA15>;
};
- L2_CA15: cache-controller@0 {
+ L2_CA15: cache-controller-0 {
compatible = "cache";
- reg = <0>;
clocks = <&cpg_clocks R8A73A4_CLK_Z>;
power-domains = <&pd_a3sm>;
cache-unified;
cache-level = <2>;
};
- L2_CA7: cache-controller@100 {
+ L2_CA7: cache-controller-1 {
compatible = "cache";
- reg = <0x100>;
clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
power-domains = <&pd_a3km>;
cache-unified;
@@ -469,6 +467,9 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&mstp4_clks R8A73A4_CLK_INTC_SYS>;
+ clock-names = "clk";
+ power-domains = <&pd_c4>;
};
bsc: bus@fec10000 {
@@ -727,16 +728,18 @@
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&main_div2_clk>, <&main_div2_clk>,
+ clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
+ <&main_div2_clk>,
<&cpg_clocks R8A73A4_CLK_HP>,
<&cpg_clocks R8A73A4_CLK_HP>;
#clock-cells = <1>;
clock-indices = <
- R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5
- R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3
+ R8A73A4_CLK_IRQC R8A73A4_CLK_INTC_SYS
+ R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
+ R8A73A4_CLK_IIC3
>;
clock-output-names =
- "irqc", "iic5", "iic4", "iic3";
+ "irqc", "intc-sys", "iic5", "iic4", "iic3";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index d8393b9..0ddac81 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -32,9 +32,8 @@
next-level-cache = <&L2_CA15>;
};
- L2_CA15: cache-controller@0 {
+ L2_CA15: cache-controller-0 {
compatible = "cache";
- reg = <0>;
cache-unified;
cache-level = <2>;
power-domains = <&sysc R8A7743_PD_CA15_SCU>;
@@ -63,6 +62,7 @@
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
irqc: interrupt-controller@e61c0000 {
@@ -82,6 +82,7 @@
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
timer {
@@ -103,6 +104,7 @@
clock-names = "extal", "usb_extal";
#clock-cells = <2>;
#power-domain-cells = <0>;
+ #reset-cells = <1>;
};
prr: chipid@ff000044 {
@@ -149,6 +151,7 @@
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -181,6 +184,7 @@
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -196,6 +200,7 @@
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -210,6 +215,7 @@
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -224,6 +230,7 @@
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -238,6 +245,7 @@
<&dmac1 0x1b>, <&dmac1 0x1c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 1106>;
status = "disabled";
};
@@ -252,6 +260,7 @@
<&dmac1 0x1f>, <&dmac1 0x20>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 1107>;
status = "disabled";
};
@@ -266,6 +275,7 @@
<&dmac1 0x23>, <&dmac1 0x24>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 1108>;
status = "disabled";
};
@@ -277,9 +287,10 @@
clocks = <&cpg CPG_MOD 206>;
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
- <&dmac1 0x3d>, <&dmac1 0x3e>;
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -294,6 +305,7 @@
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -308,6 +320,7 @@
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
status = "disabled";
};
@@ -323,6 +336,7 @@
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
status = "disabled";
};
@@ -338,6 +352,7 @@
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
status = "disabled";
};
@@ -353,6 +368,7 @@
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 719>;
status = "disabled";
};
@@ -368,6 +384,7 @@
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
status = "disabled";
};
@@ -383,6 +400,7 @@
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
status = "disabled";
};
@@ -398,6 +416,7 @@
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
status = "disabled";
};
@@ -413,6 +432,7 @@
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
status = "disabled";
};
@@ -428,6 +448,7 @@
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
status = "disabled";
};
@@ -443,6 +464,7 @@
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
status = "disabled";
};
@@ -452,6 +474,7 @@
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 1f65ff68..2feb008 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -32,9 +32,8 @@
next-level-cache = <&L2_CA7>;
};
- L2_CA7: cache-controller@0 {
+ L2_CA7: cache-controller-0 {
compatible = "cache";
- reg = <0>;
cache-unified;
cache-level = <2>;
power-domains = <&sysc R8A7745_PD_CA7_SCU>;
@@ -63,6 +62,7 @@
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
irqc: interrupt-controller@e61c0000 {
@@ -82,6 +82,7 @@
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
timer {
@@ -103,6 +104,7 @@
clock-names = "extal", "usb_extal";
#clock-cells = <2>;
#power-domain-cells = <0>;
+ #reset-cells = <1>;
};
prr: chipid@ff000044 {
@@ -149,6 +151,7 @@
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -181,6 +184,7 @@
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -196,6 +200,7 @@
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -210,6 +215,7 @@
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -224,6 +230,7 @@
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -238,6 +245,7 @@
<&dmac1 0x1b>, <&dmac1 0x1c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 1106>;
status = "disabled";
};
@@ -252,6 +260,7 @@
<&dmac1 0x1f>, <&dmac1 0x20>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 1107>;
status = "disabled";
};
@@ -266,6 +275,7 @@
<&dmac1 0x23>, <&dmac1 0x24>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 1108>;
status = "disabled";
};
@@ -277,9 +287,10 @@
clocks = <&cpg CPG_MOD 206>;
clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
- <&dmac1 0x3d>, <&dmac1 0x3e>;
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -294,6 +305,7 @@
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -308,6 +320,7 @@
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
status = "disabled";
};
@@ -323,6 +336,7 @@
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
status = "disabled";
};
@@ -338,6 +352,7 @@
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
status = "disabled";
};
@@ -353,6 +368,7 @@
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 719>;
status = "disabled";
};
@@ -368,6 +384,7 @@
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
status = "disabled";
};
@@ -383,6 +400,7 @@
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
status = "disabled";
};
@@ -398,6 +416,7 @@
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
status = "disabled";
};
@@ -413,6 +432,7 @@
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
status = "disabled";
};
@@ -428,6 +448,7 @@
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
status = "disabled";
};
@@ -443,6 +464,7 @@
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
status = "disabled";
};
@@ -452,6 +474,7 @@
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 211d239..c79d55e 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -229,5 +229,4 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 89c5b24..9412a86 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -236,7 +236,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&sdhi0 {
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index bd512c8..ba100a6 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -581,7 +581,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&msiof1 {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 6d10450..99269aa 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -129,17 +129,15 @@
next-level-cache = <&L2_CA7>;
};
- L2_CA15: cache-controller@0 {
+ L2_CA15: cache-controller-0 {
compatible = "cache";
- reg = <0>;
power-domains = <&sysc R8A7790_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};
- L2_CA7: cache-controller@100 {
+ L2_CA7: cache-controller-1 {
compatible = "cache";
- reg = <0x100>;
power-domains = <&sysc R8A7790_PD_CA7_SCU>;
cache-unified;
cache-level = <2>;
@@ -187,6 +185,9 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&mstp4_clks R8A7790_CLK_INTC_SYS>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio0: gpio@e6050000 {
@@ -1100,7 +1101,7 @@
};
/* External CAN clock */
- can_clk: can_clk {
+ can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
@@ -1366,10 +1367,10 @@
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>;
+ clocks = <&cp_clk>, <&zs_clk>;
#clock-cells = <1>;
- clock-indices = <R8A7790_CLK_IRQC>;
- clock-output-names = "irqc";
+ clock-indices = <R8A7790_CLK_IRQC R8A7790_CLK_INTC_SYS>;
+ clock-output-names = "irqc", "intc-sys";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1442,8 +1443,11 @@
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
clocks = <&p_clk>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
<&p_clk>,
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
@@ -1740,11 +1744,11 @@
rcar_sound,dvc {
dvc0: dvc-0 {
- dmas = <&audma0 0xbc>;
+ dmas = <&audma1 0xbc>;
dma-names = "tx";
};
dvc1: dvc-1 {
- dmas = <&audma0 0xbe>;
+ dmas = <&audma1 0xbe>;
dma-names = "tx";
};
};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 5405d33..001e611 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -292,7 +292,7 @@
x2_clk: x2-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <148500000>;
+ clock-frequency = <74250000>;
};
x13_clk: x13-clock {
@@ -516,7 +516,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&sdhi0 {
@@ -767,7 +766,6 @@
&pcie_bus_clk {
clock-frequency = <100000000>;
- status = "okay";
};
&pciec {
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6761d11..95da5cb 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -226,7 +226,7 @@
phy-handle = <&phy1>;
renesas,ether-link-active-low;
- status = "ok";
+ status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
@@ -359,7 +359,7 @@
/* composite video input */
&vin0 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&vin0_pins>;
pinctrl-names = "default";
@@ -401,7 +401,6 @@
&pcie_bus_clk {
clock-frequency = <100000000>;
- status = "okay";
};
&pciec {
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 9f9e485..4d0c2ce 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -74,9 +74,8 @@
next-level-cache = <&L2_CA15>;
};
- L2_CA15: cache-controller@0 {
+ L2_CA15: cache-controller-0 {
compatible = "cache";
- reg = <0>;
power-domains = <&sysc R8A7791_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
@@ -118,6 +117,9 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&mstp4_clks R8A7791_CLK_INTC_SYS>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
gpio0: gpio@e6050000 {
@@ -1124,7 +1126,7 @@
};
/* External CAN clock */
- can_clk: can_clk {
+ can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
@@ -1366,10 +1368,10 @@
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>;
+ clocks = <&cp_clk>, <&zs_clk>;
#clock-cells = <1>;
- clock-indices = <R8A7791_CLK_IRQC>;
- clock-output-names = "irqc";
+ clock-indices = <R8A7791_CLK_IRQC R8A7791_CLK_INTC_SYS>;
+ clock-output-names = "irqc", "intc-sys";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1445,8 +1447,11 @@
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
clocks = <&p_clk>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
<&p_clk>,
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
@@ -1777,11 +1782,11 @@
rcar_sound,dvc {
dvc0: dvc-0 {
- dmas = <&audma0 0xbc>;
+ dmas = <&audma1 0xbc>;
dma-names = "tx";
};
dvc1: dvc-1 {
- dmas = <&audma0 0xbe>;
+ dmas = <&audma1 0xbe>;
dma-names = "tx";
};
};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 8ecfda7..0efecb23 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -46,7 +46,7 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1000000000>;
- clocks = <&cpg_clocks R8A7792_CLK_Z>;
+ clocks = <&z_clk>;
power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
};
@@ -60,9 +60,8 @@
next-level-cache = <&L2_CA15>;
};
- L2_CA15: cache-controller@0 {
+ L2_CA15: cache-controller-0 {
compatible = "cache";
- reg = <0>;
cache-unified;
cache-level = <2>;
power-domains = <&sysc R8A7792_PD_CA15_SCU>;
@@ -93,6 +92,9 @@
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&mstp4_clks R8A7792_CLK_INTC_SYS>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
};
irqc: interrupt-controller@e61c0000 {
@@ -764,7 +766,7 @@
clocks = <&extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "z";
+ "lb", "qspi";
#power-domain-cells = <0>;
};
@@ -776,6 +778,13 @@
clock-div = <2>;
clock-mult = <1>;
};
+ z_clk: z {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7792_CLK_PLL0>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
zx_clk: zx {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
@@ -896,10 +905,12 @@
compatible = "renesas,r8a7792-mstp-clocks",
"renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>;
+ clocks = <&cp_clk>, <&zs_clk>;
#clock-cells = <1>;
- clock-indices = <R8A7792_CLK_IRQC>;
- clock-output-names = "irqc";
+ clock-indices = <
+ R8A7792_CLK_IRQC R8A7792_CLK_INTC_SYS
+ >;
+ clock-output-names = "irqc", "intc-sys";
};
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7792-mstp-clocks",
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 92fff07..806c93f 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -412,7 +412,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&sdhi0 {
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 48ce21c..4de6041 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -65,9 +65,8 @@
power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
};
- L2_CA15: cache-controller@0 {
+ L2_CA15: cache-controller-0 {
compatible = "cache";
- reg = <0>;
power-domains = <&sysc R8A7793_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
@@ -109,6 +108,9 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&mstp4_clks R8A7793_CLK_INTC_SYS>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
};
gpio0: gpio@e6050000 {
@@ -1179,10 +1181,12 @@
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>;
+ clocks = <&cp_clk>, <&zs_clk>;
#clock-cells = <1>;
- clock-indices = <R8A7793_CLK_IRQC>;
- clock-output-names = "irqc";
+ clock-indices = <
+ R8A7793_CLK_IRQC R8A7793_CLK_INTC_SYS
+ >;
+ clock-output-names = "irqc", "intc-sys";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1265,8 +1269,11 @@
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
clocks = <&p_clk>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
<&p_clk>,
<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
@@ -1426,11 +1433,11 @@
rcar_sound,dvc {
dvc0: dvc-0 {
- dmas = <&audma0 0xbc>;
+ dmas = <&audma1 0xbc>;
dma-names = "tx";
};
dvc1: dvc-1 {
- dmas = <&audma0 0xbe>;
+ dmas = <&audma1 0xbe>;
dma-names = "tx";
};
};
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 569e3f0..f1eea13 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -168,7 +168,7 @@
status = "okay";
clocks = <&mstp7_clks R8A7794_CLK_DU0>,
- <&mstp7_clks R8A7794_CLK_DU0>,
+ <&mstp7_clks R8A7794_CLK_DU1>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
@@ -375,7 +375,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&qspi {
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index cf880ac..4cb5278 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -248,7 +248,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
ðer {
@@ -425,7 +424,7 @@
status = "okay";
clocks = <&mstp7_clks R8A7794_CLK_DU0>,
- <&mstp7_clks R8A7794_CLK_DU0>,
+ <&mstp7_clks R8A7794_CLK_DU1>,
<&x2_clk>, <&x3_clk>;
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 319c106..a19b884 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -43,6 +43,7 @@
compatible = "arm,cortex-a7";
reg = <0>;
clock-frequency = <1000000000>;
+ clocks = <&z2_clk>;
power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
@@ -56,9 +57,8 @@
next-level-cache = <&L2_CA7>;
};
- L2_CA7: cache-controller@0 {
+ L2_CA7: cache-controller-0 {
compatible = "cache";
- reg = <0>;
power-domains = <&sysc R8A7794_PD_CA7_SCU>;
cache-unified;
cache-level = <2>;
@@ -75,6 +75,9 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&mstp4_clks R8A7794_CLK_INTC_SYS>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
};
gpio0: gpio@e6050000 {
@@ -923,7 +926,7 @@
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_DU0>,
- <&mstp7_clks R8A7794_CLK_DU0>;
+ <&mstp7_clks R8A7794_CLK_DU1>;
clock-names = "du.0", "du.1";
status = "disabled";
@@ -1062,6 +1065,13 @@
clock-div = <2>;
clock-mult = <1>;
};
+ z2_clk: z2 {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL0>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
zg_clk: zg {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
@@ -1248,10 +1258,10 @@
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>;
+ clocks = <&cp_clk>, <&zs_clk>;
#clock-cells = <1>;
- clock-indices = <R8A7794_CLK_IRQC>;
- clock-output-names = "irqc";
+ clock-indices = <R8A7794_CLK_IRQC R8A7794_CLK_INTC_SYS>;
+ clock-output-names = "irqc", "intc-sys";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1268,19 +1278,21 @@
clocks = <&mp_clk>, <&hp_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
- <&zx_clk>;
+ <&zx_clk>, <&zx_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
- R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
+ R8A7794_CLK_SCIF0
+ R8A7794_CLK_DU1 R8A7794_CLK_DU0
>;
clock-output-names =
"ehci", "hsusb",
"hscif2", "scif5", "scif4", "hscif1", "hscif0",
- "scif3", "scif2", "scif1", "scif0", "du0";
+ "scif3", "scif2", "scif1", "scif0",
+ "du1", "du0";
};
mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index ff9b90b..ec91325 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -250,6 +250,8 @@
clock-names = "biu", "ciu";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
status = "disabled";
};
@@ -262,6 +264,8 @@
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&cru SRST_SDIO>;
+ reset-names = "reset";
status = "disabled";
};
@@ -286,6 +290,8 @@
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 1aff4ad2..1399bc0 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -545,12 +545,12 @@
};
&global_timer {
- interrupts = <GIC_PPI 11 0xf04>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
&local_timer {
- interrupts = <GIC_PPI 13 0xf04>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
};
&i2c0 {
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 641607d..48a0c1c 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -414,6 +414,8 @@
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 21326f3..30e93f6 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -68,11 +68,9 @@
compatible = "gpio-leds";
work {
- gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "miqi:green:user";
- linux,default-trigger = "default-on";
- pinctrl-names = "default";
- pinctrl-0 = <&led_ctl>;
+ linux,default-trigger = "timer";
};
};
@@ -363,12 +361,6 @@
};
};
- leds {
- led_ctl: led-ctl {
- rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
sdmmc {
/*
* Default drive strength isn't enough to achieve even
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
new file mode 100644
index 0000000..3dda795
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -0,0 +1,298 @@
+/*
+ * Device tree file for Phytec PCM-947 carrier board
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include "rk3288-phycore-som.dtsi"
+
+/ {
+ model = "Phytec RK3288 PCM-947";
+ compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
+ user_buttons: user-buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_button_pins>;
+
+ button@0 {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+
+ button@1 {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
+ vcc_host0_5v: usb-host0-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host0_vbus_drv>;
+ regulator-name = "vcc_host0_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vdd_in_otg_out>;
+ };
+
+ vcc_host1_5v: usb-host1-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host1_vbus_drv>;
+ regulator-name = "vcc_host1_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vdd_in_otg_out>;
+ };
+
+ vcc_otg_5v: usb-otg-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc_otg_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vdd_in_otg_out>;
+ };
+};
+
+&gmac {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ touchscreen@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ };
+
+ adc@64 {
+ compatible = "maxim,max1037";
+ reg = <0x64>;
+ };
+
+ i2c_rtc: rtc@68 {
+ compatible = "rv4162";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_rtc_int>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <10 0>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c_eeprom_cb: eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* PCA9533 - 4-bit LED dimmer */
+ leddim: leddimmer@62 {
+ compatible = "nxp,pca9533";
+ reg = <0x62>;
+
+ led1 {
+ label = "red:user1";
+ linux,default-trigger = "none";
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led2 {
+ label = "green:user2";
+ linux,default-trigger = "none";
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led3 {
+ label = "blue:user3";
+ linux,default-trigger = "none";
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led4 {
+ label = "red:user4";
+ linux,default-trigger = "none";
+ type = <PCA9532_TYPE_LED>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+ bias-pull-up;
+ drive-strength = <12>;
+ };
+
+ buttons {
+ user_button_pins: user-button-pins {
+ /* button 1 */
+ rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* button 2 */
+ <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ rv4162 {
+ i2c_rtc_int: i2c-rtc-int {
+ rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ /*
+ * Default drive strength isn't enough to achieve even
+ * high-speed mode on pcm-947 board so bump up to 12 mA.
+ */
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ touchscreen {
+ ts_irq_pin: ts-irq-pin {
+ rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_host {
+ host0_vbus_drv: host0-vbus-drv {
+ rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ host1_vbus_drv: host1-vbus-drv {
+ rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_otg {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vdd_io_sd>;
+ vqmmc-supply = <&vdd_io_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
new file mode 100644
index 0000000..26cd3ad
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -0,0 +1,497 @@
+/*
+ * Device tree file for Phytec phyCORE-RK3288 SoM
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "rk3288.dtsi"
+
+/ {
+ model = "Phytec RK3288 phyCORE";
+ compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
+ /*
+ * Set the minimum memory size here and
+ * let the bootloader set the real size.
+ */
+ memory {
+ device_type = "memory";
+ reg = <0 0x8000000>;
+ };
+
+ aliases {
+ rtc0 = &i2c_rtc;
+ rtc1 = &rk818;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ leds: user-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led>;
+
+ user {
+ label = "green_led";
+ gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "keep";
+ };
+ };
+
+ vdd_emmc_io: vdd-emmc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_emmc_io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vdd_3v3_io>;
+ };
+
+ vdd_in_otg_out: vdd-in-otg-out {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_in_otg_out";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdd_misc_1v8: vdd-misc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_misc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+ operating-points = <
+ /* KHz uV */
+ 1800000 1400000
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+};
+
+&emmc {
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ vmmc-supply = <&vdd_3v3_io>;
+ vqmmc-supply = <&vdd_emmc_io>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins &phy_rst &phy_int>;
+ phy-handle = <&phy0>;
+ phy-supply = <&vdd_eth_2v5>;
+ phy-mode = "rgmii-id";
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ tx_delay = <0x0>;
+ rx_delay = <0x0>;
+
+ mdio0 {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ enet-phy-lane-no-swap;
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+};
+
+&io_domains {
+ status = "okay";
+ sdcard-supply = <&vdd_io_sd>;
+ flash0-supply = <&vdd_emmc_io>;
+ flash1-supply = <&vdd_misc_1v8>;
+ gpio1830-supply = <&vdd_3v3_io>;
+ gpio30-supply = <&vdd_3v3_io>;
+ bb-supply = <&vdd_3v3_io>;
+ dvp-supply = <&vdd_3v3_io>;
+ lcdc-supply = <&vdd_3v3_io>;
+ wifi-supply = <&vdd_3v3_io>;
+ audio-supply = <&vdd_3v3_io>;
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rk818: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc1-supply = <&vdd_sys>;
+ vcc2-supply = <&vdd_sys>;
+ vcc3-supply = <&vdd_sys>;
+ vcc4-supply = <&vdd_sys>;
+ boost-supply = <&vdd_in_otg_out>;
+ vcc6-supply = <&vdd_sys>;
+ vcc7-supply = <&vdd_misc_1v8>;
+ vcc8-supply = <&vdd_misc_1v8>;
+ vcc9-supply = <&vdd_3v3_io>;
+ vddio-supply = <&vdd_3v3_io>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_3v3_io: DCDC_REG4 {
+ regulator-name = "vdd_3v3_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd_sys: DCDC_BOOST {
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <5000000>;
+ };
+ };
+
+ /* vcc9 */
+ vdd_sd: SWITCH_REG {
+ regulator-name = "vdd_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ /* vcc6 */
+ vdd_eth_2v5: LDO_REG2 {
+ regulator-name = "vdd_eth_2v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2500000>;
+ };
+ };
+
+ /* vcc7 */
+ vdd_1v0: LDO_REG3 {
+ regulator-name = "vdd_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ /* vcc8 */
+ vdd_1v8_lcd_ldo: LDO_REG4 {
+ regulator-name = "vdd_1v8_lcd_ldo";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ /* vcc8 */
+ vdd_1v0_lcd: LDO_REG6 {
+ regulator-name = "vdd_1v0_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ /* vcc7 */
+ vdd_1v8_ldo: LDO_REG7 {
+ regulator-name = "vdd_1v8_ldo";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ /* vcc9 */
+ vdd_io_sd: LDO_REG9 {
+ regulator-name = "vdd_io_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+ };
+ };
+
+ /* M24C32-D */
+ i2c_eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ vdd_cpu: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1430000>;
+ regulator-ramp-delay = <8000>;
+ vin-supply = <&vdd_sys>;
+ };
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ emmc {
+ /*
+ * We run eMMC at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ emmc_clk: emmc-clk {
+ rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 2 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 3 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 4 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 5 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 6 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 7 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ };
+ };
+
+ gmac {
+ phy_int: phy-int {
+ rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rst: phy-rst {
+ rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ leds {
+ user_led: user-led {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ /* Pin for switching state between sleep and non-sleep state */
+ pmic_sleep: pmic-sleep {
+ rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vdd_1v8_ldo>;
+};
+
+&spi2 {
+ status = "okay";
+
+ serial_flash: flash@0 {
+ compatible = "micron,n25q128a13", "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "okay";
+ };
+};
+
+&tsadc {
+ status = "okay";
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 1c0bbc9..f0778a4 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -136,7 +136,7 @@
regulator-always-on;
};
- vcc_io: REG2 {
+ vcc_io: vccio_codec: REG2 {
regulator-name = "VCC_IO";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 96a2e74..a23a948 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -81,11 +81,35 @@
};
};
+ sata_pwr: sata-prw-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sata_pwr_en>;
+ /* Always turn on the 5V sata power connector */
+ regulator-always-on;
+ regulator-name = "sata_pwr";
+ };
+
spdif_out: spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
};
+ sound-i2s {
+ compatible = "rockchip,rk3288-hdmi-analog";
+ pinctrl-names = "default";
+ pinctrl-0 = <&phone_ctl>, <&hp_det>;
+ rockchip,audio-codec = <&es8388>;
+ rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+ rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+ rockchip,i2s-controller = <&i2s>;
+ rockchip,model = "I2S";
+ rockchip,routing = "Analog", "LOUT2",
+ "Analog", "ROUT2";
+ };
+
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&hym8563>;
@@ -173,10 +197,28 @@
};
};
+&i2c2 {
+ status = "okay";
+
+ es8388: es8388@10 {
+ compatible = "everest,es8388", "everest,es8328";
+ reg = <0x10>;
+ AVDD-supply = <&vccio_codec>;
+ DVDD-supply = <&vccio_codec>;
+ HPVDD-supply = <&vccio_codec>;
+ PVDD-supply = <&vccio_codec>;
+ clocks = <&cru SCLK_I2S0_OUT>;
+ };
+};
+
&i2c5 {
status = "okay";
};
+&i2s {
+ status = "okay";
+};
+
&pinctrl {
ir {
ir_int: ir-int {
@@ -190,12 +232,28 @@
};
};
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ phone_ctl: phone-ctl {
+ rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+ sata {
+ sata_pwr_en: sata-pwr-en {
+ rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
sdmmc {
sdmmc_pwr: sdmmc-pwr {
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -224,3 +282,7 @@
&usb_host0_ehci {
status = "okay";
};
+
+&usb_host1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
new file mode 100644
index 0000000..f601c78
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Rockchip RK3288 Tinker Board";
+ compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+
+ memory {
+ reg = <0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button@0 {
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ act-led {
+ gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="mmc0";
+ };
+
+ heartbeat-led {
+ gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="heartbeat";
+ };
+
+ pwr-led {
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "rockchip,tinker-codec";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vcc33_lan>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+ <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc18_ldo1: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_ldo1";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_mipi: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_mipi";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_codec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc33_lan: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lan";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ backlight {
+ bl_en: bl-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ eth_phy {
+ eth_phy_pwr: eth-phy-pwr {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+ &pcfg_pull_up>;
+ };
+
+ dvs_1: dvs-1 {
+ rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 \
+ &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pwr_3g: pwr-3g {
+ rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc18_ldo1>;
+ status ="okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+ vmmc-supply = <&vcc33_sd>;
+ vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status= "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index df8a0db..ad5d602 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -236,6 +236,8 @@
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0c0000 0x4000>;
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
status = "disabled";
};
@@ -248,6 +250,8 @@
fifo-depth = <0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0d0000 0x4000>;
+ resets = <&cru SRST_SDIO0>;
+ reset-names = "reset";
status = "disabled";
};
@@ -260,6 +264,8 @@
fifo-depth = <0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0e0000 0x4000>;
+ resets = <&cru SRST_SDIO1>;
+ reset-names = "reset";
status = "disabled";
};
@@ -272,6 +278,8 @@
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0f0000 0x4000>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 0b45811..4aa6f60 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -132,14 +132,14 @@
global_timer: global-timer@1013c200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x1013c200 0x20>;
- interrupts = <GIC_PPI 11 0x304>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&cru CORE_PERI>;
};
local_timer: local-timer@1013c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1013c600 0x20>;
- interrupts = <GIC_PPI 13 0x304>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&cru CORE_PERI>;
};
@@ -223,7 +223,11 @@
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
clock-names = "biu", "ciu";
+ dmas = <&dmac2 1>;
+ dma-names = "rx-tx";
fifo-depth = <256>;
+ resets = <&cru SRST_SDMMC>;
+ reset-names = "reset";
status = "disabled";
};
@@ -233,7 +237,11 @@
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
clock-names = "biu", "ciu";
+ dmas = <&dmac2 3>;
+ dma-names = "rx-tx";
fifo-depth = <256>;
+ resets = <&cru SRST_SDIO>;
+ reset-names = "reset";
status = "disabled";
};
@@ -243,7 +251,11 @@
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
clock-names = "biu", "ciu";
+ dmas = <&dmac2 4>;
+ dma-names = "rx-tx";
fifo-depth = <256>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index 0ccb414..c55cbb3 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -94,13 +94,12 @@
};
watchdog: watchdog@7e004000 {
- compatible = "samsung,s3c2410-wdt";
+ compatible = "samsung,s3c6410-wdt";
reg = <0x7e004000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <26>;
clock-names = "watchdog";
clocks = <&clocks PCLK_WDT>;
- status = "disabled";
};
i2c0: i2c@7f004000 {
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index a853918..726c5d0 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -310,7 +310,7 @@
};
watchdog: watchdog@e2700000 {
- compatible = "samsung,s3c2410-wdt";
+ compatible = "samsung,s3c6410-wdt";
reg = <0xe2700000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <26>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 528b4e9..8067c71 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1305,6 +1305,11 @@
status = "okay";
};
+ sfrbu: sfr@fc05c000 {
+ compatible = "atmel,sama5d2-sfrbu", "syscon";
+ reg = <0xfc05c000 0x20>;
+ };
+
chipid@fc069000 {
compatible = "atmel,sama5d2-chipid";
reg = <0xfc069000 0x8>;
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 2c43c4d..b2674bd 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -15,7 +15,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/reset/altr,rst-mgr.h>
/ {
@@ -38,13 +37,13 @@
#size-cells = <0>;
enable-method = "altr,socfpga-smp";
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
@@ -52,6 +51,15 @@
};
};
+ pmu: pmu@ff111000 {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <0 176 4>, <0 177 4>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ reg = <0xff111000 0x1000>,
+ <0xff113000 0x1000>;
+ };
+
intc: intc@fffed000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -145,7 +153,7 @@
compatible = "fixed-clock";
};
- main_pll: main_pll {
+ main_pll: main_pll@40 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
@@ -153,7 +161,7 @@
clocks = <&osc1>;
reg = <0x40>;
- mpuclk: mpuclk {
+ mpuclk: mpuclk@48 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
@@ -161,7 +169,7 @@
reg = <0x48>;
};
- mainclk: mainclk {
+ mainclk: mainclk@4c {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
@@ -169,7 +177,7 @@
reg = <0x4C>;
};
- dbg_base_clk: dbg_base_clk {
+ dbg_base_clk: dbg_base_clk@50 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>, <&osc1>;
@@ -177,21 +185,21 @@
reg = <0x50>;
};
- main_qspi_clk: main_qspi_clk {
+ main_qspi_clk: main_qspi_clk@54 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
reg = <0x54>;
};
- main_nand_sdmmc_clk: main_nand_sdmmc_clk {
+ main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
reg = <0x58>;
};
- cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
+ cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
@@ -199,7 +207,7 @@
};
};
- periph_pll: periph_pll {
+ periph_pll: periph_pll@80 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
@@ -207,42 +215,42 @@
clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
reg = <0x80>;
- emac0_clk: emac0_clk {
+ emac0_clk: emac0_clk@88 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x88>;
};
- emac1_clk: emac1_clk {
+ emac1_clk: emac1_clk@8c {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x8C>;
};
- per_qspi_clk: per_qsi_clk {
+ per_qspi_clk: per_qsi_clk@90 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x90>;
};
- per_nand_mmc_clk: per_nand_mmc_clk {
+ per_nand_mmc_clk: per_nand_mmc_clk@94 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x94>;
};
- per_base_clk: per_base_clk {
+ per_base_clk: per_base_clk@98 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x98>;
};
- h2f_usr1_clk: h2f_usr1_clk {
+ h2f_usr1_clk: h2f_usr1_clk@9c {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
@@ -250,7 +258,7 @@
};
};
- sdram_pll: sdram_pll {
+ sdram_pll: sdram_pll@c0 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
@@ -258,28 +266,28 @@
clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
reg = <0xC0>;
- ddr_dqs_clk: ddr_dqs_clk {
+ ddr_dqs_clk: ddr_dqs_clk@c8 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xC8>;
};
- ddr_2x_dqs_clk: ddr_2x_dqs_clk {
+ ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xCC>;
};
- ddr_dq_clk: ddr_dq_clk {
+ ddr_dq_clk: ddr_dq_clk@d0 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xD0>;
};
- h2f_usr2_clk: h2f_usr2_clk {
+ h2f_usr2_clk: h2f_usr2_clk@d4 {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
@@ -678,7 +686,7 @@
status = "disabled";
};
- eccmgr: eccmgr@ffd08140 {
+ eccmgr: eccmgr {
compatible = "altr,socfpga-ecc-manager";
#address-cells = <1>;
#size-cells = <1>;
@@ -879,7 +887,7 @@
dma-names = "tx", "rx";
};
- usbphy0: usbphy@0 {
+ usbphy0: usbphy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
status = "okay";
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 6b0b746..bead79e 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -14,7 +14,6 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/altr,rst-mgr-a10.h>
@@ -119,7 +118,7 @@
compatible = "fixed-clock";
};
- main_pll: main_pll {
+ main_pll: main_pll@40 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
@@ -142,35 +141,35 @@
div-reg = <0x144 0 11>;
};
- main_emaca_clk: main_emaca_clk {
+ main_emaca_clk: main_emaca_clk@68 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
reg = <0x68>;
};
- main_emacb_clk: main_emacb_clk {
+ main_emacb_clk: main_emacb_clk@6c {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
reg = <0x6C>;
};
- main_emac_ptp_clk: main_emac_ptp_clk {
+ main_emac_ptp_clk: main_emac_ptp_clk@70 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
reg = <0x70>;
};
- main_gpio_db_clk: main_gpio_db_clk {
+ main_gpio_db_clk: main_gpio_db_clk@74 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
reg = <0x74>;
};
- main_sdmmc_clk: main_sdmmc_clk {
+ main_sdmmc_clk: main_sdmmc_clk@78 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk"
;
@@ -178,28 +177,28 @@
reg = <0x78>;
};
- main_s2f_usr0_clk: main_s2f_usr0_clk {
+ main_s2f_usr0_clk: main_s2f_usr0_clk@7c {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
reg = <0x7C>;
};
- main_s2f_usr1_clk: main_s2f_usr1_clk {
+ main_s2f_usr1_clk: main_s2f_usr1_clk@80 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
reg = <0x80>;
};
- main_hmc_pll_ref_clk: main_hmc_pll_ref_clk {
+ main_hmc_pll_ref_clk: main_hmc_pll_ref_clk@84 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
reg = <0x84>;
};
- main_periph_ref_clk: main_periph_ref_clk {
+ main_periph_ref_clk: main_periph_ref_clk@9c {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_pll>;
@@ -207,7 +206,7 @@
};
};
- periph_pll: periph_pll {
+ periph_pll: periph_pll@c0 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
@@ -230,56 +229,56 @@
div-reg = <0x144 16 11>;
};
- peri_emaca_clk: peri_emaca_clk {
+ peri_emaca_clk: peri_emaca_clk@e8 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
reg = <0xE8>;
};
- peri_emacb_clk: peri_emacb_clk {
+ peri_emacb_clk: peri_emacb_clk@ec {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
reg = <0xEC>;
};
- peri_emac_ptp_clk: peri_emac_ptp_clk {
+ peri_emac_ptp_clk: peri_emac_ptp_clk@f0 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
reg = <0xF0>;
};
- peri_gpio_db_clk: peri_gpio_db_clk {
+ peri_gpio_db_clk: peri_gpio_db_clk@f4 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
reg = <0xF4>;
};
- peri_sdmmc_clk: peri_sdmmc_clk {
+ peri_sdmmc_clk: peri_sdmmc_clk@f8 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
reg = <0xF8>;
};
- peri_s2f_usr0_clk: peri_s2f_usr0_clk {
+ peri_s2f_usr0_clk: peri_s2f_usr0_clk@fc {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
reg = <0xFC>;
};
- peri_s2f_usr1_clk: peri_s2f_usr1_clk {
+ peri_s2f_usr1_clk: peri_s2f_usr1_clk@100 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
reg = <0x100>;
};
- peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk {
+ peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk@104 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&periph_pll>;
@@ -287,7 +286,7 @@
};
};
- mpu_free_clk: mpu_free_clk {
+ mpu_free_clk: mpu_free_clk@60 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
@@ -296,7 +295,7 @@
reg = <0x60>;
};
- noc_free_clk: noc_free_clk {
+ noc_free_clk: noc_free_clk@64 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
@@ -305,7 +304,7 @@
reg = <0x64>;
};
- s2f_user1_free_clk: s2f_user1_free_clk {
+ s2f_user1_free_clk: s2f_user1_free_clk@104 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
@@ -314,7 +313,7 @@
reg = <0x104>;
};
- sdmmc_free_clk: sdmmc_free_clk {
+ sdmmc_free_clk: sdmmc_free_clk@f8 {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-perip-clk";
clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
@@ -649,7 +648,7 @@
reg = <0xffe00000 0x40000>;
};
- eccmgr: eccmgr@ffd06000 {
+ eccmgr: eccmgr {
compatible = "altr,socfpga-a10-ecc-manager";
altr,sysmgr-syscon = <&sysmgr>;
#address-cells = <1>;
@@ -806,7 +805,7 @@
status = "disabled";
};
- usbphy0: usbphy@0 {
+ usbphy0: usbphy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
status = "okay";
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index c57e6ce..94e0884 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -30,7 +30,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
@@ -121,6 +121,11 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ a10sr_rst: reset-controller {
+ compatible = "altr,a10sr-reset";
+ #reset-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 8672edf..aac4fee 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -26,7 +26,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
index 5ecd2ef..7b49395 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -25,7 +25,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
index 6ad3b1e..3c03da6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -21,7 +21,7 @@
model = "Aries/DENX MCV";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1 GiB */
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
index e5a98e5..21e3972 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -71,7 +71,6 @@
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- reg = <0>;
ts,sample-time = <4>;
ts,mod-12b = <1>;
ts,ref-sel = <0>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 7ea32c8..155829f 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -26,7 +26,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index a0c90b3b..a4a555c 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -26,7 +26,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index c3d52f2..53bf99e 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -25,7 +25,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
@@ -60,18 +60,18 @@
&leds {
compatible = "gpio-leds";
- led@0 {
+ led0 {
label = "led:green:heartbeat";
gpios = <&porta 28 1>;
linux,default-trigger = "heartbeat";
};
- led@1 {
+ led1 {
label = "led:green:D7";
gpios = <&portb 19 1>;
};
- led@2 {
+ led2 {
label = "led:green:D8";
gpios = <&portb 25 1>;
};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 5b7e3c2..8860dd2 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -28,7 +28,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>;
@@ -121,3 +121,24 @@
&usb1 {
status = "okay";
};
+
+&qspi {
+ status = "okay";
+
+ flash0: n25q512a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q512a";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ };
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index 363ee62..8931980 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -57,7 +57,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index f9345e0..dfe2193 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -26,7 +26,7 @@
bootargs = "console=ttyS0,57600";
};
- memory {
+ memory@0 {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1 GB */
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
index d865a89..c67e76c 100644
--- a/arch/arm/boot/dts/spear600-evb.dts
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -22,95 +22,91 @@
device_type = "memory";
reg = <0 0x10000000>;
};
+};
- ahb {
- clcd@fc200000 {
- status = "okay";
- };
+&clcd {
+ status = "okay";
+};
- dma@fc400000 {
- status = "okay";
- };
+&dmac {
+ status = "okay";
+};
- ehci@e1800000 {
- status = "okay";
- };
+&ehci_usb0 {
+ status = "okay";
+};
- ehci@e2000000 {
- status = "okay";
- };
+&ehci_usb1 {
+ status = "okay";
+};
- gmac: ethernet@e0800000 {
- phy-mode = "gmii";
- status = "okay";
- };
+&gmac {
+ phy-mode = "gmii";
+ status = "okay";
+};
- ohci@e1900000 {
- status = "okay";
- };
+&ohci_usb0 {
+ status = "okay";
+};
- ohci@e2100000 {
- status = "okay";
- };
+&ohci_usb1 {
+ status = "okay";
+};
- smi: flash@fc000000 {
- status = "okay";
- clock-rate=<50000000>;
+&smi {
+ status = "okay";
+ clock-rate = <50000000>;
- flash@f8000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xf8000000 0x800000>;
- st,smi-fast-mode;
+ flash@f8000000 {
+ reg = <0xf8000000 0x800000>;
+ st,smi-fast-mode;
- partition@0 {
- label = "xloader";
- reg = <0x0 0x10000>;
- };
- partition@10000 {
- label = "u-boot";
- reg = <0x10000 0x50000>;
- };
- partition@60000 {
- label = "environment";
- reg = <0x60000 0x10000>;
- };
- partition@70000 {
- label = "dtb";
- reg = <0x70000 0x10000>;
- };
- partition@80000 {
- label = "linux";
- reg = <0x80000 0x310000>;
- };
- partition@390000 {
- label = "rootfs";
- reg = <0x390000 0x0>;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0x0 0x10000>;
};
- };
-
- apb {
- serial@d0000000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <>;
+ partition@10000 {
+ label = "u-boot";
+ reg = <0x10000 0x50000>;
};
-
- serial@d0080000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <>;
+ partition@60000 {
+ label = "environment";
+ reg = <0x60000 0x10000>;
};
-
- rtc@fc900000 {
- status = "okay";
+ partition@70000 {
+ label = "dtb";
+ reg = <0x70000 0x10000>;
};
-
- i2c@d0200000 {
- clock-frequency = <400000>;
- status = "okay";
+ partition@80000 {
+ label = "linux";
+ reg = <0x80000 0x310000>;
+ };
+ partition@390000 {
+ label = "rootfs";
+ reg = <0x390000 0x0>;
};
};
};
};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&i2c {
+ clock-frequency = <400000>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index 9f60a7b..6b32d20 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -49,7 +49,7 @@
#interrupt-cells = <1>;
};
- clcd@fc200000 {
+ clcd: clcd@fc200000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xfc200000 0x1000>;
interrupt-parent = <&vic1>;
@@ -57,7 +57,7 @@
status = "disabled";
};
- dma@fc400000 {
+ dmac: dma@fc400000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0xfc400000 0x1000>;
interrupt-parent = <&vic1>;
@@ -97,7 +97,7 @@
status = "disabled";
};
- ehci@e1800000 {
+ ehci_usb0: ehci@e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupt-parent = <&vic1>;
@@ -105,7 +105,7 @@
status = "disabled";
};
- ehci@e2000000 {
+ ehci_usb1: ehci@e2000000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe2000000 0x1000>;
interrupt-parent = <&vic1>;
@@ -113,7 +113,7 @@
status = "disabled";
};
- ohci@e1900000 {
+ ohci_usb0: ohci@e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupt-parent = <&vic1>;
@@ -121,7 +121,7 @@
status = "disabled";
};
- ohci@e2100000 {
+ ohci_usb1: ohci@e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic1>;
@@ -135,7 +135,7 @@
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
- serial@d0000000 {
+ uart0: serial@d0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0000000 0x1000>;
interrupt-parent = <&vic0>;
@@ -143,7 +143,7 @@
status = "disabled";
};
- serial@d0080000 {
+ uart1: serial@d0080000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0080000 0x1000>;
interrupt-parent = <&vic0>;
@@ -181,7 +181,7 @@
interrupts = <4>;
};
- i2c@d0200000 {
+ i2c: i2c@d0200000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
@@ -191,7 +191,7 @@
status = "disabled";
};
- rtc@fc900000 {
+ rtc: rtc@fc900000 {
compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
interrupts = <10>;
@@ -204,6 +204,14 @@
interrupt-parent = <&vic0>;
interrupts = <16>;
};
+
+ adc: adc@d820b000 {
+ compatible = "st,spear600-adc";
+ reg = <0xd820b000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <6>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 0441845..12c0757 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -464,6 +464,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -476,6 +478,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -488,6 +492,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi3_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -500,6 +506,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi4_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -513,6 +521,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi10_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -525,6 +535,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi11_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -537,6 +549,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi12_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -789,7 +803,7 @@
status = "okay";
};
- st231_gp0: remote-processor {
+ st231_gp0: st231-gp0@0 {
compatible = "st,st231-rproc";
memory-region = <&gp0_reserved>;
resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
@@ -802,7 +816,7 @@
mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
};
- st231_delta: remote-processor {
+ st231_delta: st231-delta@0 {
compatible = "st,st231-rproc";
memory-region = <&delta_reserved>;
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 3c99466..b633114 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -167,6 +167,34 @@
status = "okay";
};
+&timers1 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer@0 {
+ status = "okay";
+ };
+};
+
+&timers3 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer@2 {
+ status = "okay";
+ };
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 0dc18a0..69a9579 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -93,6 +93,10 @@
status = "okay";
};
+&rtc {
+ status = "okay";
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 9222b9f..191fa50 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -88,6 +88,14 @@
gpios = <&gpioa 0 0>;
};
};
+
+ /* This turns on vbus for otg for host mode (dwc2) */
+ vcc5v_otg: vcc5v-otg-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpioc 4 0>;
+ regulator-name = "vcc5_host1";
+ regulator-always-on;
+ };
};
&clk_hse {
@@ -105,3 +113,11 @@
pinctrl-names = "default";
status = "okay";
};
+
+&usbotg_hs {
+ compatible = "st,stm32f4x9-fsotg";
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_fs_pins_b>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index ee0da97..b2a2b5c 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -450,6 +450,8 @@
clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
interrupt-parent = <&adc>;
interrupts = <0>;
+ dmas = <&dma2 0 0 0x400 0x0>;
+ dma-names = "rx";
status = "disabled";
};
@@ -460,6 +462,8 @@
clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>;
interrupt-parent = <&adc>;
interrupts = <1>;
+ dmas = <&dma2 3 1 0x400 0x0>;
+ dma-names = "rx";
status = "disabled";
};
@@ -470,6 +474,8 @@
clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>;
interrupt-parent = <&adc>;
interrupts = <2>;
+ dmas = <&dma2 1 2 0x400 0x0>;
+ dma-names = "rx";
status = "disabled";
};
};
@@ -666,6 +672,28 @@
};
};
+ usbotg_fs_pins_a: usbotg_fs@0 {
+ pins {
+ pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+ <STM32F429_PA11_FUNC_OTG_FS_DM>,
+ <STM32F429_PA12_FUNC_OTG_FS_DP>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_fs_pins_b: usbotg_fs@1 {
+ pins {
+ pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+ <STM32F429_PB14_FUNC_OTG_HS_DM>,
+ <STM32F429_PB15_FUNC_OTG_HS_DP>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
usbotg_hs_pins_a: usbotg_hs@0 {
pins {
pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
@@ -805,6 +833,15 @@
status = "disabled";
};
+ usbotg_fs: usb@50000000 {
+ compatible = "st,stm32f4x9-fsotg";
+ reg = <0x50000000 0x40000>;
+ interrupts = <67>;
+ clocks = <&rcc 0 39>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
rng: rng@50060800 {
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 0dd56ef..75470c3 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -68,6 +68,15 @@
soc {
dma-ranges = <0xc0000000 0x0 0x10000000>;
};
+
+ /* This turns on vbus for otg for host mode (dwc2) */
+ vcc5v_otg: vcc5v-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpiob 2 0>;
+ regulator-name = "vcc5_host1";
+ regulator-always-on;
+ };
};
&rcc {
@@ -115,3 +124,10 @@
pinctrl-names = "default";
status = "okay";
};
+
+&usbotg_fs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_fs_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 755fb92..c2765ce 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -43,6 +43,8 @@
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
+#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
/ {
clocks {
@@ -51,6 +53,24 @@
compatible = "fixed-clock";
clock-frequency = <0>;
};
+
+ clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_i2s_ckin: clk-i2s-ckin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ };
};
soc {
@@ -58,7 +78,7 @@
compatible = "st,stm32-timer";
reg = <0x40000000 0x400>;
interrupts = <28>;
- clocks = <&rcc 0 128>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
status = "disabled";
};
@@ -66,7 +86,7 @@
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
interrupts = <29>;
- clocks = <&rcc 0 129>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
status = "disabled";
};
@@ -74,7 +94,7 @@
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
interrupts = <30>;
- clocks = <&rcc 0 130>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
status = "disabled";
};
@@ -82,14 +102,14 @@
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
- clocks = <&rcc 0 131>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
};
timer6: timer@40001000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
interrupts = <54>;
- clocks = <&rcc 0 132>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
status = "disabled";
};
@@ -97,7 +117,21 @@
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
interrupts = <55>;
- clocks = <&rcc 0 133>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+ status = "disabled";
+ };
+
+ rtc: rtc@40002800 {
+ compatible = "st,stm32-rtc";
+ reg = <0x40002800 0x400>;
+ clocks = <&rcc 1 CLK_RTC>;
+ clock-names = "ck_rtc";
+ assigned-clocks = <&rcc 1 CLK_RTC>;
+ assigned-clock-parents = <&rcc 1 CLK_LSE>;
+ interrupt-parent = <&exti>;
+ interrupts = <17 1>;
+ interrupt-names = "alarm";
+ st,syscfg = <&pwrcfg>;
status = "disabled";
};
@@ -105,7 +139,7 @@
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
- clocks = <&rcc 0 145>;
+ clocks = <&rcc 1 CLK_USART2>;
status = "disabled";
};
@@ -113,7 +147,7 @@
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
- clocks = <&rcc 0 146>;
+ clocks = <&rcc 1 CLK_USART3>;
status = "disabled";
};
@@ -121,7 +155,7 @@
compatible = "st,stm32f7-uart";
reg = <0x40004c00 0x400>;
interrupts = <52>;
- clocks = <&rcc 0 147>;
+ clocks = <&rcc 1 CLK_UART4>;
status = "disabled";
};
@@ -129,7 +163,7 @@
compatible = "st,stm32f7-uart";
reg = <0x40005000 0x400>;
interrupts = <53>;
- clocks = <&rcc 0 148>;
+ clocks = <&rcc 1 CLK_UART5>;
status = "disabled";
};
@@ -137,7 +171,7 @@
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
- clocks = <&rcc 0 158>;
+ clocks = <&rcc 1 CLK_UART7>;
status = "disabled";
};
@@ -145,7 +179,7 @@
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
- clocks = <&rcc 0 159>;
+ clocks = <&rcc 1 CLK_UART8>;
status = "disabled";
};
@@ -153,7 +187,7 @@
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
- clocks = <&rcc 0 164>;
+ clocks = <&rcc 1 CLK_USART1>;
status = "disabled";
};
@@ -161,7 +195,7 @@
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
- clocks = <&rcc 0 165>;
+ clocks = <&rcc 1 CLK_USART6>;
status = "disabled";
};
@@ -178,6 +212,11 @@
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
};
+ pwrcfg: power-config@40007000 {
+ compatible = "syscon";
+ reg = <0x40007000 0x400>;
+ };
+
pin-controller {
#address-cells = <1>;
#size-cells = <1>;
@@ -191,7 +230,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0x400>;
- clocks = <&rcc 0 256>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
@@ -199,7 +238,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x400 0x400>;
- clocks = <&rcc 0 257>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
@@ -207,7 +246,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x800 0x400>;
- clocks = <&rcc 0 258>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
@@ -215,7 +254,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0xc00 0x400>;
- clocks = <&rcc 0 259>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
@@ -223,7 +262,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1000 0x400>;
- clocks = <&rcc 0 260>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
@@ -231,7 +270,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1400 0x400>;
- clocks = <&rcc 0 261>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
@@ -239,7 +278,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1800 0x400>;
- clocks = <&rcc 0 262>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
@@ -247,7 +286,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1c00 0x400>;
- clocks = <&rcc 0 263>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
@@ -255,7 +294,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2000 0x400>;
- clocks = <&rcc 0 264>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
@@ -263,7 +302,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2400 0x400>;
- clocks = <&rcc 0 265>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
@@ -271,7 +310,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2800 0x400>;
- clocks = <&rcc 0 266>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
@@ -298,9 +337,12 @@
rcc: rcc@40023800 {
#clock-cells = <2>;
- compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+ compatible = "st,stm32f746-rcc", "st,stm32-rcc";
reg = <0x40023800 0x400>;
- clocks = <&clk_hse>;
+ clocks = <&clk_hse>, <&clk_i2s_ckin>;
+ st,syscfg = <&pwrcfg>;
+ assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+ assigned-clock-rates = <1000000>;
};
};
};
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
new file mode 100644
index 0000000..fcc1e06
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32h7-pinfunc.h>
+
+/ {
+ soc {
+ pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32h743-pinctrl";
+ ranges = <0 0x58020000 0x3000>;
+ pins-are-numbered;
+
+ gpioa: gpio@58020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOA";
+ };
+
+ gpiob: gpio@58020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x400 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOB";
+ };
+
+ gpioc: gpio@58020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x800 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOC";
+ };
+
+ gpiod: gpio@58020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0xc00 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOD";
+ };
+
+ gpioe: gpio@58021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOE";
+ };
+
+ gpiof: gpio@58021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1400 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOF";
+ };
+
+ gpiog: gpio@58021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1800 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOG";
+ };
+
+ gpioh: gpio@58021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1c00 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOH";
+ };
+
+ gpioi: gpio@58022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOI";
+ };
+
+ gpioj: gpio@58022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2400 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOJ";
+ };
+
+ gpiok: gpio@58022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2800 0x400>;
+ clocks = <&timer_clk>;
+ st,bank-name = "GPIOK";
+ };
+
+ usart1_pins: usart1@0 {
+ pins1 {
+ pinmux = <STM32H7_PB14_FUNC_USART1_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32H7_PB15_FUNC_USART1_RX>;
+ bias-disable;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
new file mode 100644
index 0000000..4685629
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include "armv7-m.dtsi"
+
+/ {
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ timer_clk: timer-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ };
+ };
+
+ soc {
+ usart1: serial@40011000 {
+ compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ status = "disabled";
+ clocks = <&timer_clk>;
+
+ };
+
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ clocks = <&timer_clk>;
+ };
+ };
+};
+
+&systick {
+ clock-frequency = <250000000>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
new file mode 100644
index 0000000..c6effbb
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h743-pinctrl.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32H743i-EVAL board";
+ compatible = "st,stm32h743i-eval", "st,stm32h743";
+
+ chosen {
+ bootargs = "root=/dev/ram";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0xd0000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+};
+
+&clk_hse {
+ clock-frequency = <125000000>;
+};
+
+&usart1 {
+ pinctrl-0 = <&usart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index f3fc274..f2a01fe 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele A1000";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 04e040e..d844938 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -46,7 +46,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubieboard";
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
index 8317fbf..aad3bec 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index a48b464..a1a7282 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Miniand Hackberry";
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index f3092703..b8923b9 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 4ef2a60..4a27eb9 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "iNet-9F Rev 03";
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index fc4d4d4..308dc15 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Jesurun Q5";
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index a288503..98a5f72 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -46,7 +46,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "HAOYU Electronics Marsboard A10";
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index af42ebb..484c574 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "PineRiver Mini X-Plus";
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index 9c1afd4..2b75745 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -44,7 +44,6 @@
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MK802";
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 214a5ac..3a2522a 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A10-OLinuXino-LIME";
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index b0365d6..83596fd 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -47,7 +47,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LinkSprite pcDuino";
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index bfa6bbd..a68c7cc 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index ba20b48..b63668e 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -47,7 +47,6 @@
#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
@@ -974,6 +973,11 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ can0_pins_a: can0@0 {
+ pins = "PH20", "PH21";
+ function = "can";
+ };
+
emac_pins_a: emac0@0 {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -1283,6 +1287,22 @@
status = "disabled";
};
+ ps20: ps2@01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <62>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+
+ ps21: ps2@01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <63>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
+ };
+
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
@@ -1313,19 +1333,11 @@
#size-cells = <0>;
};
- ps20: ps2@01c2a000 {
- compatible = "allwinner,sun4i-a10-ps2";
- reg = <0x01c2a000 0x400>;
- interrupts = <62>;
- clocks = <&apb1_gates 6>;
- status = "disabled";
- };
-
- ps21: ps2@01c2a400 {
- compatible = "allwinner,sun4i-a10-ps2";
- reg = <0x01c2a400 0x400>;
- interrupts = <63>;
- clocks = <&apb1_gates 7>;
+ can0: can@01c2bc00 {
+ compatible = "allwinner,sun4i-a10-can";
+ reg = <0x01c2bc00 0x400>;
+ interrupts = <26>;
+ clocks = <&apb1_gates 4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
index a539b72..c6f742a 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
@@ -44,7 +44,6 @@
#include "sun5i-a10s.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Auxtek t003 A10s hdmi tv-stick";
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index e1b5e8a..a27c3fa 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -44,7 +44,6 @@
#include "sun5i-a10s.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Auxtek t004 A10s hdmi tv-stick";
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index d8245c6..894f874 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A10s-Olinuxino Micro";
@@ -83,7 +82,7 @@
&emac {
pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
+ pinctrl-0 = <&emac_pins_b>;
phy = <&phy1>;
status = "okay";
};
@@ -257,7 +256,7 @@
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
+ pinctrl-0 = <&uart2_pins_b>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
index 51371f9..262b366 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "R7 A10s hdmi tv-stick";
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
index 2b8adda..ea3e565 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "A10s-Wobo i5";
@@ -95,7 +94,7 @@
&emac {
pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_b>;
+ pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 24b0f5f..1e38ff8 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -47,7 +47,6 @@
#include "sun5i.dtsi"
#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
@@ -61,7 +60,7 @@
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ framebuffer@2 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -70,45 +69,9 @@
<&ccu CLK_DE_BE>, <&ccu CLK_HDMI>;
status = "disabled";
};
-
- framebuffer@1 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
- status = "disabled";
- };
-
- framebuffer@2 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
- <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
- status = "disabled";
- };
};
soc@01c00000 {
- emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-a10-emac";
- reg = <0x01c0b000 0x1000>;
- interrupts = <55>;
- clocks = <&ccu CLK_AHB_EMAC>;
- allwinner,sram = <&emac_sram 1>;
- status = "disabled";
- };
-
- mdio: mdio@01c0b080 {
- compatible = "allwinner,sun4i-a10-mdio";
- reg = <0x01c0b080 0x14>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
pwm: pwm@01c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
@@ -116,26 +79,6 @@
#pwm-cells = <3>;
status = "disabled";
};
-
- uart0: serial@01c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
- interrupts = <1>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART0>;
- status = "disabled";
- };
-
- uart2: serial@01c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <3>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART2>;
- status = "disabled";
- };
};
};
@@ -151,12 +94,12 @@
function = "uart0";
};
- uart2_pins_a: uart2@0 {
+ uart2_pins_b: uart2@1 {
pins = "PC18", "PC19";
function = "uart2";
};
- emac_pins_a: emac0@0 {
+ emac_pins_b: emac0@1 {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
@@ -165,15 +108,6 @@
function = "emac";
};
- emac_pins_b: emac0@1 {
- pins = "PD6", "PD7", "PD10",
- "PD11", "PD12", "PD13", "PD14",
- "PD15", "PD18", "PD19", "PD20",
- "PD21", "PD22", "PD23", "PD24",
- "PD25", "PD26", "PD27";
- function = "emac";
- };
-
mmc1_pins_a: mmc1@0 {
pins = "PG3", "PG4", "PG5",
"PG6", "PG7", "PG8";
@@ -193,9 +127,4 @@
};
&sram_a {
- emac_sram: sram-section@8000 {
- compatible = "allwinner,sun4i-a10-sram-a3-a4";
- reg = <0x8000 0x4000>;
- status = "disabled";
- };
};
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
index 4243545..34411d2 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 5879a75..2489c16 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "HSG H702";
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
index 566cda9..bc88389 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
@@ -50,7 +50,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Lichee Pi One";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index 60e393e..3a831ea 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -46,7 +46,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A13-Olinuxino Micro";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 940d47e..95f591b 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A13-Olinuxino";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index fb2ddb9..6436bad 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -46,27 +46,11 @@
#include "sun5i.dtsi"
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
- chosen {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- framebuffer@0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
- status = "disabled";
- };
- };
-
thermal-zones {
cpu_thermal {
/* milliseconds */
@@ -105,44 +89,6 @@
};
soc@01c00000 {
- tcon0: lcd-controller@01c0c000 {
- compatible = "allwinner,sun5i-a13-tcon";
- reg = <0x01c0c000 0x1000>;
- interrupts = <44>;
- resets = <&ccu RST_LCD>;
- reset-names = "lcd";
- clocks = <&ccu CLK_AHB_LCD>,
- <&ccu CLK_TCON_CH0>,
- <&ccu CLK_TCON_CH1>;
- clock-names = "ahb",
- "tcon-ch0",
- "tcon-ch1";
- clock-output-names = "tcon-pixel-clock";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- tcon0_in_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_out_tcon0>;
- };
- };
-
- tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
- };
- };
-
pwm: pwm@01c20e00 {
compatible = "allwinner,sun5i-a13-pwm";
reg = <0x01c20e00 0xc>;
@@ -151,74 +97,6 @@
status = "disabled";
};
- fe0: display-frontend@01e00000 {
- compatible = "allwinner,sun5i-a13-display-frontend";
- reg = <0x01e00000 0x20000>;
- interrupts = <47>;
- clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>,
- <&ccu CLK_DRAM_DE_FE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_FE>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- fe0_out_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_in_fe0>;
- };
- };
- };
- };
-
- be0: display-backend@01e60000 {
- compatible = "allwinner,sun5i-a13-display-backend";
- reg = <0x01e60000 0x10000>;
- clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_DRAM_DE_BE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_BE>;
- status = "disabled";
-
- assigned-clocks = <&ccu CLK_DE_BE>;
- assigned-clock-rates = <300000000>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- be0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- be0_in_fe0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&fe0_out_be0>;
- };
- };
-
- be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- be0_out_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_in_be0>;
- };
- };
- };
- };
};
};
@@ -244,22 +122,4 @@
&pio {
compatible = "allwinner,sun5i-a13-pinctrl";
-
- lcd_rgb666_pins: lcd_rgb666@0 {
- pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
- "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
- "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
- "PD24", "PD25", "PD26", "PD27";
- function = "lcd0";
- };
-
- uart1_pins_a: uart1@0 {
- pins = "PE10", "PE11";
- function = "uart1";
- };
-
- uart1_pins_b: uart1@1 {
- pins = "PG3", "PG4";
- function = "uart1";
- };
};
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
index 0cf0813..c55b11a 100644
--- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
@@ -171,7 +171,7 @@
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>;
+ pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>;
status = "disabled";
};
@@ -220,7 +220,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+ pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index 1a845af..558c16a 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -281,7 +281,7 @@
&pwm {
pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>;
+ pinctrl-0 = <&pwm0_pins>;
status = "okay";
};
@@ -332,7 +332,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+ pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi
index cb9b2aa..3eb56cad 100644
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/sun5i-gr8.dtsi
@@ -42,429 +42,19 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include "sun5i.dtsi"
+
#include <dt-bindings/clock/sun5i-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun5i-ccu.h>
/ {
- interrupt-parent = <&intc>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a8";
- reg = <0x0>;
- clocks = <&ccu CLK_CPU>;
- };
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
- };
-
display-engine {
compatible = "allwinner,sun5i-a13-display-engine";
allwinner,pipelines = <&fe0>;
};
soc@01c00000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- sram-controller@01c00000 {
- compatible = "allwinner,sun4i-a10-sram-controller";
- reg = <0x01c00000 0x30>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- sram_a: sram@00000000 {
- compatible = "mmio-sram";
- reg = <0x00000000 0xc000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00000000 0xc000>;
- };
-
- sram_d: sram@00010000 {
- compatible = "mmio-sram";
- reg = <0x00010000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00010000 0x1000>;
-
- otg_sram: sram-section@0000 {
- compatible = "allwinner,sun4i-a10-sram-d";
- reg = <0x0000 0x1000>;
- status = "disabled";
- };
- };
- };
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun4i-a10-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <27>;
- clocks = <&ccu CLK_AHB_DMA>;
- #dma-cells = <2>;
- };
-
- nfc: nand@01c03000 {
- compatible = "allwinner,sun4i-a10-nand";
- reg = <0x01c03000 0x1000>;
- interrupts = <37>;
- clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 3>;
- dma-names = "rxtx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi0: spi@01c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <10>;
- clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 27>,
- <&dma SUN4I_DMA_DEDICATED 26>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@01c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 9>,
- <&dma SUN4I_DMA_DEDICATED 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- tve0: tv-encoder@01c0a000 {
- compatible = "allwinner,sun4i-a10-tv-encoder";
- reg = <0x01c0a000 0x1000>;
- clocks = <&ccu CLK_AHB_TVE>;
- resets = <&ccu RST_TVE>;
- status = "disabled";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_out_tve0>;
- };
- };
- };
-
- tcon0: lcd-controller@01c0c000 {
- compatible = "allwinner,sun5i-a13-tcon";
- reg = <0x01c0c000 0x1000>;
- interrupts = <44>;
- resets = <&ccu RST_LCD>;
- reset-names = "lcd";
- clocks = <&ccu CLK_AHB_LCD>,
- <&ccu CLK_TCON_CH0>,
- <&ccu CLK_TCON_CH1>;
- clock-names = "ahb",
- "tcon-ch0",
- "tcon-ch1";
- clock-output-names = "tcon-pixel-clock";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- tcon0_in_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_out_tcon0>;
- };
- };
-
- tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- tcon0_out_tve0: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tve0_in_tcon0>;
- };
- };
- };
- };
-
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
- clock-names = "ahb", "mmc";
- interrupts = <32>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
- clock-names = "ahb", "mmc";
- interrupts = <33>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
- clock-names = "ahb", "mmc";
- interrupts = <34>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usb_otg: usb@01c13000 {
- compatible = "allwinner,sun4i-a10-musb";
- reg = <0x01c13000 0x0400>;
- clocks = <&ccu CLK_AHB_OTG>;
- interrupts = <38>;
- interrupt-names = "mc";
- phys = <&usbphy 0>;
- phy-names = "usb";
- extcon = <&usbphy 0>;
- allwinner,sram = <&otg_sram 1>;
- status = "disabled";
-
- dr_mode = "otg";
- };
-
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4>;
- reg-names = "phy_ctrl", "pmu1";
- clocks = <&ccu CLK_USB_PHY0>;
- clock-names = "usb_phy";
- resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
- reset-names = "usb0_reset", "usb1_reset";
- status = "disabled";
- };
-
- ehci0: usb@01c14000 {
- compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ccu CLK_AHB_EHCI>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@01c14400 {
- compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <40>;
- clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <12>;
- clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 29>,
- <&dma SUN4I_DMA_DEDICATED 28>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- ccu: clock@01c20000 {
- compatible = "nextthing,gr8-ccu";
- reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
- clock-names = "hosc", "losc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-a10-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- pio: pinctrl@01c20800 {
- compatible = "nextthing,gr8-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <28>;
- clocks = <&ccu CLK_APB0_PIO>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <3>;
- #gpio-cells = <3>;
-
- i2c0_pins_a: i2c0@0 {
- pins = "PB0", "PB1";
- function = "i2c0";
- };
-
- i2c1_pins_a: i2c1@0 {
- pins = "PB15", "PB16";
- function = "i2c1";
- };
-
- i2c2_pins_a: i2c2@0 {
- pins = "PB17", "PB18";
- function = "i2c2";
- };
-
- i2s0_data_pins_a: i2s0-data@0 {
- pins = "PB6", "PB7", "PB8", "PB9";
- function = "i2s0";
- };
-
- i2s0_mclk_pins_a: i2s0-mclk@0 {
- pins = "PB5";
- function = "i2s0";
- };
-
- ir0_rx_pins_a: ir0@0 {
- pins = "PB4";
- function = "ir0";
- };
-
- lcd_rgb666_pins: lcd-rgb666@0 {
- pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
- "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
- "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
- "PD24", "PD25", "PD26", "PD27";
- function = "lcd0";
- };
-
- mmc0_pins_a: mmc0@0 {
- pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- function = "mmc0";
- drive-strength = <30>;
- };
-
- nand_pins_a: nand-base0@0 {
- pins = "PC0", "PC1", "PC2",
- "PC5", "PC8", "PC9", "PC10",
- "PC11", "PC12", "PC13", "PC14",
- "PC15";
- function = "nand0";
- };
-
- nand_cs0_pins_a: nand-cs@0 {
- pins = "PC4";
- function = "nand0";
- };
-
- nand_rb0_pins_a: nand-rb@0 {
- pins = "PC6";
- function = "nand0";
- };
-
- pwm0_pins_a: pwm0@0 {
- pins = "PB2";
- function = "pwm0";
- };
-
- pwm1_pins: pwm1 {
- pins = "PG13";
- function = "pwm1";
- };
-
- spdif_tx_pins_a: spdif@0 {
- pins = "PB10";
- function = "spdif";
- bias-pull-up;
- };
-
- uart1_pins_a: uart1@1 {
- pins = "PG3", "PG4";
- function = "uart1";
- };
-
- uart1_cts_rts_pins_a: uart1-cts-rts@0 {
- pins = "PG5", "PG6";
- function = "uart1";
- };
-
- uart2_pins_a: uart2@1 {
- pins = "PD2", "PD3";
- function = "uart2";
- };
-
- uart2_cts_rts_pins_a: uart2-cts-rts@0 {
- pins = "PD4", "PD5";
- function = "uart2";
- };
-
- uart3_pins_a: uart3@1 {
- pins = "PG9", "PG10";
- function = "uart3";
- };
-
- uart3_cts_rts_pins_a: uart3-cts-rts@0 {
- pins = "PG11", "PG12";
- function = "uart3";
- };
- };
-
pwm: pwm@01c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
@@ -473,18 +63,6 @@
status = "disabled";
};
- timer@01c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x90>;
- interrupts = <22>;
- clocks = <&ccu CLK_HOSC>;
- };
-
- wdt: watchdog@01c20c90 {
- compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
spdif: spdif@01c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-spdif";
@@ -498,15 +76,6 @@
status = "disabled";
};
- ir0: ir@01c21800 {
- compatible = "allwinner,sun4i-a10-ir";
- clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
- clock-names = "apb", "ir";
- interrupts = <5>;
- reg = <0x01c21800 0x40>;
- status = "disabled";
- };
-
i2s0: i2s@01c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
@@ -519,168 +88,39 @@
dma-names = "rx", "tx";
status = "disabled";
};
+ };
+};
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <31>;
- status = "disabled";
- };
+&ccu {
+ compatible = "nextthing,gr8-ccu";
+};
- codec: codec@01c22c00 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec";
- reg = <0x01c22c00 0x40>;
- interrupts = <30>;
- clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
- clock-names = "apb", "codec";
- dmas = <&dma SUN4I_DMA_NORMAL 19>,
- <&dma SUN4I_DMA_NORMAL 19>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+&pio {
+ compatible = "nextthing,gr8-pinctrl";
- rtp: rtp@01c25000 {
- compatible = "allwinner,sun5i-a13-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
- #thermal-sensor-cells = <0>;
- };
+ i2s0_data_pins_a: i2s0-data@0 {
+ pins = "PB6", "PB7", "PB8", "PB9";
+ function = "i2s0";
+ };
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <2>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART1>;
- status = "disabled";
- };
+ i2s0_mclk_pins_a: i2s0-mclk@0 {
+ pins = "PB5";
+ function = "i2s0";
+ };
- uart2: serial@01c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <3>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART2>;
- status = "disabled";
- };
+ pwm1_pins: pwm1 {
+ pins = "PG13";
+ function = "pwm1";
+ };
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART3>;
- status = "disabled";
- };
+ spdif_tx_pins_a: spdif@0 {
+ pins = "PB10";
+ function = "spdif";
+ bias-pull-up;
+ };
- i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <7>;
- clocks = <&ccu CLK_APB1_I2C0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <8>;
- clocks = <&ccu CLK_APB1_I2C1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <9>;
- clocks = <&ccu CLK_APB1_I2C2>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- timer@01c60000 {
- compatible = "allwinner,sun5i-a13-hstimer";
- reg = <0x01c60000 0x1000>;
- interrupts = <82>, <83>;
- clocks = <&ccu CLK_AHB_HSTIMER>;
- };
-
- fe0: display-frontend@01e00000 {
- compatible = "allwinner,sun5i-a13-display-frontend";
- reg = <0x01e00000 0x20000>;
- interrupts = <47>;
- clocks = <&ccu CLK_AHB_DE_FE>, <&ccu CLK_DE_FE>,
- <&ccu CLK_DRAM_DE_FE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_FE>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- fe0_out_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_in_fe0>;
- };
- };
- };
- };
-
- be0: display-backend@01e60000 {
- compatible = "allwinner,sun5i-a13-display-backend";
- reg = <0x01e60000 0x10000>;
- clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_DRAM_DE_BE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_BE>;
- status = "disabled";
-
- assigned-clocks = <&ccu CLK_DE_BE>;
- assigned-clock-rates = <300000000>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- be0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- be0_in_fe0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&fe0_out_be0>;
- };
- };
-
- be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- be0_out_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_in_be0>;
- };
- };
- };
- };
+ uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+ pins = "PG5", "PG6";
+ function = "uart1";
};
};
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
index e86fa46..d078560 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -128,6 +128,10 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
@@ -281,7 +285,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_a>,
- <&uart3_pins_cts_rts_a>;
+ <&uart3_cts_rts_pins_a>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
index 4c11413..de35dbc 100644
--- a/arch/arm/boot/dts/sun5i-r8.dtsi
+++ b/arch/arm/boot/dts/sun5i-r8.dtsi
@@ -45,43 +45,3 @@
#include "sun5i-a13.dtsi"
-/ {
- chosen {
- framebuffer@1 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
- <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
- status = "disabled";
- };
- };
-
- soc@01c00000 {
- tve0: tv-encoder@01c0a000 {
- compatible = "allwinner,sun4i-a10-tv-encoder";
- reg = <0x01c0a000 0x1000>;
- clocks = <&ccu CLK_AHB_TVE>;
- resets = <&ccu RST_TVE>;
- status = "disabled";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_out_tve0>;
- };
- };
- };
- };
-};
-
-&tcon0_out {
- tcon0_out_tve0: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tve0_in_tcon0>;
- };
-};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index a9574a6..5175f9c 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -46,7 +46,6 @@
#include <dt-bindings/clock/sun5i-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun5i-ccu.h>
/ {
@@ -64,6 +63,31 @@
};
};
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
+ status = "disabled";
+ };
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
+ <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
+ status = "disabled";
+ };
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -105,6 +129,12 @@
ranges = <0 0x00000000 0xc000>;
};
+ emac_sram: sram-section@8000 {
+ compatible = "allwinner,sun4i-a10-sram-a3-a4";
+ reg = <0x8000 0x4000>;
+ status = "disabled";
+ };
+
sram_d: sram@00010000 {
compatible = "mmio-sram";
reg = <0x00010000 0x1000>;
@@ -128,6 +158,19 @@
#dma-cells = <2>;
};
+ nfc: nand@01c03000 {
+ compatible = "allwinner,sun4i-a10-nand";
+ reg = <0x01c03000 0x1000>;
+ interrupts = <37>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+ dma-names = "rxtx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
spi0: spi@01c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
@@ -156,6 +199,84 @@
#size-cells = <0>;
};
+ tve0: tv-encoder@01c0a000 {
+ compatible = "allwinner,sun4i-a10-tv-encoder";
+ reg = <0x01c0a000 0x1000>;
+ clocks = <&ccu CLK_AHB_TVE>;
+ resets = <&ccu RST_TVE>;
+ status = "disabled";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tve0_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_tve0>;
+ };
+ };
+ };
+
+ emac: ethernet@01c0b000 {
+ compatible = "allwinner,sun4i-a10-emac";
+ reg = <0x01c0b000 0x1000>;
+ interrupts = <55>;
+ clocks = <&ccu CLK_AHB_EMAC>;
+ allwinner,sram = <&emac_sram 1>;
+ status = "disabled";
+ };
+
+ mdio: mdio@01c0b080 {
+ compatible = "allwinner,sun4i-a10-mdio";
+ reg = <0x01c0b080 0x14>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ tcon0: lcd-controller@01c0c000 {
+ compatible = "allwinner,sun5i-a13-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <44>;
+ resets = <&ccu RST_LCD>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB_LCD>,
+ <&ccu CLK_TCON_CH0>,
+ <&ccu CLK_TCON_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon-pixel-clock";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon0_out_tve0: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tve0_in_tcon0>;
+ };
+ };
+ };
+ };
+
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
@@ -273,6 +394,15 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ emac_pins_a: emac0@0 {
+ pins = "PD6", "PD7", "PD10",
+ "PD11", "PD12", "PD13", "PD14",
+ "PD15", "PD18", "PD19", "PD20",
+ "PD21", "PD22", "PD23", "PD24",
+ "PD25", "PD26", "PD27";
+ function = "emac";
+ };
+
i2c0_pins_a: i2c0@0 {
pins = "PB0", "PB1";
function = "i2c0";
@@ -288,6 +418,11 @@
function = "i2c2";
};
+ ir0_rx_pins_a: ir0@0 {
+ pins = "PB4";
+ function = "ir0";
+ };
+
lcd_rgb565_pins: lcd_rgb565@0 {
pins = "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
@@ -296,6 +431,14 @@
function = "lcd0";
};
+ lcd_rgb666_pins: lcd_rgb666@0 {
+ pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+ "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+ "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
+ };
+
mmc0_pins_a: mmc0@0 {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@@ -321,6 +464,24 @@
bias-pull-up;
};
+ nand_pins_a: nand-base0@0 {
+ pins = "PC0", "PC1", "PC2",
+ "PC5", "PC8", "PC9", "PC10",
+ "PC11", "PC12", "PC13", "PC14",
+ "PC15";
+ function = "nand0";
+ };
+
+ nand_cs0_pins_a: nand-cs@0 {
+ pins = "PC4";
+ function = "nand0";
+ };
+
+ nand_rb0_pins_a: nand-rb@0 {
+ pins = "PC6";
+ function = "nand0";
+ };
+
spi2_pins_a: spi2@0 {
pins = "PE1", "PE2", "PE3";
function = "spi2";
@@ -331,12 +492,32 @@
function = "spi2";
};
+ uart1_pins_a: uart1@0 {
+ pins = "PE10", "PE11";
+ function = "uart1";
+ };
+
+ uart1_pins_b: uart1@1 {
+ pins = "PG3", "PG4";
+ function = "uart1";
+ };
+
+ uart2_pins_a: uart2@0 {
+ pins = "PD2", "PD3";
+ function = "uart2";
+ };
+
+ uart2_cts_rts_pins_a: uart2-cts-rts@0 {
+ pins = "PD4", "PD5";
+ function = "uart2";
+ };
+
uart3_pins_a: uart3@0 {
pins = "PG9", "PG10";
function = "uart3";
};
- uart3_pins_cts_rts_a: uart3-cts-rts@0 {
+ uart3_cts_rts_pins_a: uart3-cts-rts@0 {
pins = "PG11", "PG12";
function = "uart3";
};
@@ -359,6 +540,15 @@
reg = <0x01c20c90 0x10>;
};
+ ir0: ir@01c21800 {
+ compatible = "allwinner,sun4i-a10-ir";
+ clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ interrupts = <5>;
+ reg = <0x01c21800 0x40>;
+ status = "disabled";
+ };
+
lradc: lradc@01c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
@@ -391,6 +581,16 @@
#thermal-sensor-cells = <0>;
};
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_APB1_UART0>;
+ status = "disabled";
+ };
+
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
@@ -401,6 +601,16 @@
status = "disabled";
};
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <3>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_APB1_UART2>;
+ status = "disabled";
+ };
+
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
@@ -447,5 +657,75 @@
interrupts = <82>, <83>;
clocks = <&ccu CLK_AHB_HSTIMER>;
};
+
+ fe0: display-frontend@01e00000 {
+ compatible = "allwinner,sun5i-a13-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <47>;
+ clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>,
+ <&ccu CLK_DRAM_DE_FE>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_FE>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe0>;
+ };
+ };
+ };
+ };
+
+ be0: display-backend@01e60000 {
+ compatible = "allwinner,sun5i-a13-display-backend";
+ reg = <0x01e60000 0x10000>;
+ interrupts = <47>;
+ clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_DRAM_DE_BE>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_BE>;
+ status = "disabled";
+
+ assigned-clocks = <&ccu CLK_DE_BE>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_be0>;
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
index effbdc7..7f34323 100644
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Allwinner A31 APP4 EVB1 Evaluation Board";
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index f5ececd..85eff03 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "WITS A31 Colombus Evaluation Board";
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index f094eeb..d4f74f4 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A31 Hummingbird";
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index 2bc57d2..010a84c 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele I7 Quad top set box";
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 8af5b66..50605fd 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele M9 top set box";
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index bf0f583..5219556 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele A1000G Quad top set box";
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index a4b9618..9c999d3 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -48,7 +48,6 @@
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/clock/sun6i-a31-ccu.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun6i-a31-ccu.h>
/ {
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index 5e8f8c4..75e5781 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -43,8 +43,6 @@
/dts-v1/;
#include "sun6i-a31s.dtsi"
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
/ {
model = "CSQ CS908 top set box";
compatible = "csq,cs908", "allwinner,sun6i-a31s";
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 2238eda..f371275 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MSI Primo81 tablet";
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
index 4ec0c86..d7325bc 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Sinlinx SinA31s Core Board";
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index 7ff68bd..b3d9822 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -63,6 +63,23 @@
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
};
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board SPDIF";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
};
&codec {
@@ -153,6 +170,12 @@
regulator-name = "vcc-gmac-phy";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_pins_a>;
+ status = "okay";
+};
+
&usb_otg {
dr_mode = "peripheral";
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index 3bd862b..bdfdce8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -86,6 +86,10 @@
};
};
+&cpu0 {
+ cpu-supply = <®_dcdc3>;
+};
+
&ehci0 {
status = "okay";
};
@@ -151,6 +155,17 @@
status = "okay";
};
+&p2wi {
+ status = "okay";
+
+ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
&pio {
gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
pins = "PA21";
@@ -176,6 +191,48 @@
};
};
+#include "axp22x.dtsi"
+
+®_dc5ldo {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpus";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vdd-3v0";
+};
+
+®_dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-sys-dll";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index 154ebf5..f3edf9c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Yones TopTech BS1078 v2 Tablet";
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
index edaba5f..3cc4046 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -44,7 +44,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
aliases {
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 91f2e5f..ed2f35a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LeMaker Banana Pi";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 4dc1e10..a2eab7a 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubieboard2";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f019aa3..102903e 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubietruck";
@@ -268,6 +267,10 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -324,6 +327,10 @@
status = "okay";
};
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index e921ba4..99c00b9 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A20 Hummingbird";
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index 385fd82..4da4971 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "I12 / Q5 / QT840A A20 tvbox";
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
index f5b5325..28d3abb 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "ICnova-A20 SWAC";
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index bbf1c8c..96bb0bc 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Lamobo R1";
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
index 0e074bd..86f6981 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele M3";
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
index 97d7a8b..c4ee307 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
@@ -53,7 +53,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "mk808c";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index a1450c1..1af5b46 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-Olimex-SOM-EVB";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 1297432..dcd0f7a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -49,7 +49,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-OLinuXino-LIME";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 71cca53..e7d4542 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-OLinuXino-LIME2";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 223fbd9..def0ad8 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -49,7 +49,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-Olinuxino Micro";
@@ -85,6 +84,14 @@
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&ehci0 {
status = "okay";
};
@@ -111,13 +118,9 @@
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
@@ -251,6 +254,29 @@
};
};
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
®_ahci_5v {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index a742657..7af4c8f 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Orange Pi Mini";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index 3de980c..0a8d4a0 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Orange Pi";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 4599f98..7c96b53 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LinkSprite pcDuino3";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 2db97fc..93aa559 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -49,7 +49,6 @@
#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
@@ -1096,6 +1095,11 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ can0_pins_a: can0@0 {
+ pins = "PH20", "PH21";
+ function = "can";
+ };
+
clk_out_a_pins_a: clk_out_a@0 {
pins = "PI12";
function = "clk_out_a";
@@ -1538,6 +1542,22 @@
status = "disabled";
};
+ ps20: ps2@01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+
+ ps21: ps2@01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
+ };
+
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
@@ -1582,6 +1602,15 @@
#size-cells = <0>;
};
+ can0: can@01c2bc00 {
+ compatible = "allwinner,sun7i-a20-can",
+ "allwinner,sun4i-a10-can";
+ reg = <0x01c2bc00 0x400>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb1_gates 4>;
+ status = "disabled";
+ };
+
i2c4: i2c@01c2c000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
@@ -1629,20 +1658,5 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- ps20: ps2@01c2a000 {
- compatible = "allwinner,sun4i-a10-ps2";
- reg = <0x01c2a000 0x400>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 6>;
- status = "disabled";
- };
-
- ps21: ps2@01c2a400 {
- compatible = "allwinner,sun4i-a10-ps2";
- reg = <0x01c2a400 0x400>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 7>;
- status = "disabled";
- };
};
};
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 8a3ed21..a8b978d 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -47,7 +47,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
/ {
@@ -493,6 +492,7 @@
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
+ #cooling-cells = <2>;
assigned-clocks = <&ccu CLK_GPU>;
assigned-clock-rates = <384000000>;
diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts
index c21f5b1..87289a6 100644
--- a/arch/arm/boot/dts/sun8i-a23-evb.dts
+++ b/arch/arm/boot/dts/sun8i-a23-evb.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Allwinner A23 Evaluation Board";
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
index 3ab5c0c..b6958e8 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
@@ -50,7 +50,6 @@
};
&codec {
- pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
allwinner,audio-routing =
"Headphone", "HP",
@@ -62,12 +61,3 @@
"Headset Mic", "HBIAS";
status = "okay";
};
-
-&pio {
- codec_pa_pin: codec_pa_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index 03b89bd..9b620cc 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Sinlinx SinA33";
@@ -84,6 +83,24 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc3>;
+};
+
+&cpu0_opp_table {
+ opp@1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <1320000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1320000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+};
+
&de {
status = "okay";
};
@@ -175,6 +192,10 @@
#include "axp223.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
®_aldo1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 306af6c..0139782 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -43,24 +43,79 @@
*/
#include "sun8i-a23-a33.dtsi"
+#include <dt-bindings/thermal/thermal.h>
/ {
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
+ opp@120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@240000000 {
+ opp-hz = /bits/ 64 <240000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@312000000 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@504000000 {
+ opp-hz = /bits/ 64 <504000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
opp@648000000 {
opp-hz = /bits/ 64 <648000000>;
opp-microvolt = <1040000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
+ opp@720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
opp@816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
+ opp@912000000 {
+ opp-hz = /bits/ 64 <912000000>;
+ opp-microvolt = <1200000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
opp@1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1200000>;
@@ -73,6 +128,7 @@
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@1 {
@@ -100,6 +156,27 @@
status = "disabled";
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&ths>;
+ };
+
+ mali_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp@144000000 {
+ opp-hz = /bits/ 64 <144000000>;
+ };
+
+ opp@240000000 {
+ opp-hz = /bits/ 64 <240000000>;
+ };
+
+ opp@384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ };
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
@@ -196,6 +273,13 @@
status = "disabled";
};
+ ths: ths@01c25000 {
+ compatible = "allwinner,sun8i-a33-ths";
+ reg = <0x01c25000 0x100>;
+ #thermal-sensor-cells = <0>;
+ #io-channel-cells = <0>;
+ };
+
fe0: display-frontend@01e00000 {
compatible = "allwinner,sun8i-a33-display-frontend";
reg = <0x01e00000 0x20000>;
@@ -306,12 +390,83 @@
};
};
};
+
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map2 {
+ trip = <&gpu_alert0>;
+ cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
+ };
+
+ map3 {
+ trip = <&gpu_alert1>;
+ cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu_alert0: gpu_alert0 {
+ /* milliCelsius */
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: cpu_alert1 {
+ /* milliCelsius */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpu_alert1: gpu_alert1 {
+ /* milliCelsius */
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
&ccu {
compatible = "allwinner,sun8i-a33-ccu";
};
+&mali {
+ operating-points-v2 = <&mali_opp_table>;
+};
+
&pio {
compatible = "allwinner,sun8i-a33-pinctrl";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index a789a7c..0ec1437 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -47,8 +47,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
/ {
interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index b7ca916..9e8b082 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -49,7 +49,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi Zero";
@@ -96,6 +95,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -132,6 +135,10 @@
bias-pull-up;
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
@@ -154,7 +161,17 @@
status = "disabled";
};
-&usbphy {
- /* USB VBUS is always on */
+&usb_otg {
+ dr_mode = "peripheral";
status = "okay";
};
+
+&usbphy {
+ /*
+ * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
+ * power up the board; when it's used as OTG port, this VBUS is
+ * always off even if the board is powered via GPIO pins.
+ */
+ status = "okay";
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index c0c49dd..52acbe1 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Banana Pi BPI-M2-Plus";
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 25b225b..e7fae65 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Beelink X2";
@@ -138,6 +137,16 @@
};
};
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
new file mode 100644
index 0000000..03ff6f8
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "FriendlyARM NanoPi NEO Air";
+ compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "nanopi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ default-state = "on";
+ };
+
+ status {
+ label = "nanopi:blue:status";
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ };
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ /* USB VBUS is always on */
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index 2216e68..c6decee 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -47,7 +47,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
aliases {
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 047e9e1..5b6d145 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi 2";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 22b99b4..9b47a0d 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi Lite";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 34da853..5fea430 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi One";
@@ -90,6 +89,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -104,6 +107,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
@@ -127,6 +134,11 @@
};
};
+®_usb0_vbus {
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -151,7 +163,14 @@
status = "disabled";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
- /* USB VBUS is always on */
+ /* USB Type-A port's VBUS is always on */
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index d43978d..f148111 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi PC";
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 27780b9..b36f9f4 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -40,16 +40,9 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
-#include <dt-bindings/clock/sun8i-h3-ccu.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include "sunxi-h3-h5.dtsi"
/ {
- interrupt-parent = <&gic>;
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -86,563 +79,48 @@
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+};
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+&ccu {
+ compatible = "allwinner,sun8i-h3-ccu";
+};
- osc24M: osc24M_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
+&mmc0 {
+ compatible = "allwinner,sun7i-a20-mmc";
+ clocks = <&ccu CLK_BUS_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+};
- osc32k: osc32k_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
+&mmc1 {
+ compatible = "allwinner,sun7i-a20-mmc";
+ clocks = <&ccu CLK_BUS_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+};
- apb0: apb0_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "apb0";
- };
+&mmc2 {
+ compatible = "allwinner,sun7i-a20-mmc";
+ clocks = <&ccu CLK_BUS_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+};
- apb0_gates: clk@01f01428 {
- compatible = "allwinner,sun8i-h3-apb0-gates-clk",
- "allwinner,sun4i-a10-gates-clk";
- reg = <0x01f01428 0x4>;
- #clock-cells = <1>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>;
- clock-output-names = "apb0_pio", "apb0_ir";
- };
-
- ir_clk: ir_clk@01f01454 {
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01f01454 0x4>;
- #clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>;
- clock-output-names = "ir";
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun8i-h3-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_DMA>;
- resets = <&ccu RST_BUS_DMA>;
- #dma-cells = <1>;
- };
-
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC0>,
- <&ccu CLK_MMC0>,
- <&ccu CLK_MMC0_OUTPUT>,
- <&ccu CLK_MMC0_SAMPLE>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ccu RST_BUS_MMC0>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC1>,
- <&ccu CLK_MMC1>,
- <&ccu CLK_MMC1_OUTPUT>,
- <&ccu CLK_MMC1_SAMPLE>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ccu RST_BUS_MMC1>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC2>,
- <&ccu CLK_MMC2>,
- <&ccu CLK_MMC2_OUTPUT>,
- <&ccu CLK_MMC2_SAMPLE>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ccu RST_BUS_MMC2>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usbphy: phy@01c19400 {
- compatible = "allwinner,sun8i-h3-usb-phy";
- reg = <0x01c19400 0x2c>,
- <0x01c1a800 0x4>,
- <0x01c1b800 0x4>,
- <0x01c1c800 0x4>,
- <0x01c1d800 0x4>;
- reg-names = "phy_ctrl",
- "pmu0",
- "pmu1",
- "pmu2",
- "pmu3";
- clocks = <&ccu CLK_USB_PHY0>,
- <&ccu CLK_USB_PHY1>,
- <&ccu CLK_USB_PHY2>,
- <&ccu CLK_USB_PHY3>;
- clock-names = "usb0_phy",
- "usb1_phy",
- "usb2_phy",
- "usb3_phy";
- resets = <&ccu RST_USB_PHY0>,
- <&ccu RST_USB_PHY1>,
- <&ccu RST_USB_PHY2>,
- <&ccu RST_USB_PHY3>;
- reset-names = "usb0_reset",
- "usb1_reset",
- "usb2_reset",
- "usb3_reset";
- status = "disabled";
- #phy-cells = <1>;
- };
-
- ehci1: usb@01c1b000 {
- compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
- reg = <0x01c1b000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
- resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci1: usb@01c1b400 {
- compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
- reg = <0x01c1b400 0x100>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
- <&ccu CLK_USB_OHCI1>;
- resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci2: usb@01c1c000 {
- compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
- reg = <0x01c1c000 0x100>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
- resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci2: usb@01c1c400 {
- compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
- reg = <0x01c1c400 0x100>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
- <&ccu CLK_USB_OHCI2>;
- resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci3: usb@01c1d000 {
- compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
- reg = <0x01c1d000 0x100>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
- resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci3: usb@01c1d400 {
- compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
- reg = <0x01c1d400 0x100>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
- <&ccu CLK_USB_OHCI3>;
- resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ccu: clock@01c20000 {
- compatible = "allwinner,sun8i-h3-ccu";
- reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
- clock-names = "hosc", "losc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun8i-h3-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
-
- i2c0_pins: i2c0 {
- pins = "PA11", "PA12";
- function = "i2c0";
- };
-
- i2c1_pins: i2c1 {
- pins = "PA18", "PA19";
- function = "i2c1";
- };
-
- i2c2_pins: i2c2 {
- pins = "PE12", "PE13";
- function = "i2c2";
- };
-
- mmc0_pins_a: mmc0@0 {
- pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- function = "mmc0";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- mmc0_cd_pin: mmc0_cd_pin@0 {
- pins = "PF6";
- function = "gpio_in";
- bias-pull-up;
- };
-
- mmc1_pins_a: mmc1@0 {
- pins = "PG0", "PG1", "PG2", "PG3",
- "PG4", "PG5";
- function = "mmc1";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- mmc2_8bit_pins: mmc2_8bit {
- pins = "PC5", "PC6", "PC8",
- "PC9", "PC10", "PC11",
- "PC12", "PC13", "PC14",
- "PC15", "PC16";
- function = "mmc2";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- spdif_tx_pins_a: spdif@0 {
- pins = "PA17";
- function = "spdif";
- };
-
- spi0_pins: spi0 {
- pins = "PC0", "PC1", "PC2", "PC3";
- function = "spi0";
- };
-
- spi1_pins: spi1 {
- pins = "PA15", "PA16", "PA14", "PA13";
- function = "spi1";
- };
-
- uart0_pins_a: uart0@0 {
- pins = "PA4", "PA5";
- function = "uart0";
- };
-
- uart1_pins: uart1 {
- pins = "PG6", "PG7";
- function = "uart1";
- };
-
- uart1_rts_cts_pins: uart1_rts_cts {
- pins = "PG8", "PG9";
- function = "uart1";
- };
-
- uart2_pins: uart2 {
- pins = "PA0", "PA1";
- function = "uart2";
- };
-
- uart3_pins: uart3 {
- pins = "PA13", "PA14";
- function = "uart3";
- };
- };
-
- timer@01c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0xa0>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc24M>;
- };
-
- spi0: spi@01c68000 {
- compatible = "allwinner,sun8i-h3-spi";
- reg = <0x01c68000 0x1000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma 23>, <&dma 23>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
- resets = <&ccu RST_BUS_SPI0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@01c69000 {
- compatible = "allwinner,sun8i-h3-spi";
- reg = <0x01c69000 0x1000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
- clock-names = "ahb", "mod";
- dmas = <&dma 24>, <&dma 24>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
- resets = <&ccu RST_BUS_SPI1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- wdt0: watchdog@01c20ca0 {
- compatible = "allwinner,sun6i-a31-wdt";
- reg = <0x01c20ca0 0x20>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- spdif: spdif@01c21000 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun8i-h3-spdif";
- reg = <0x01c21000 0x400>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
- resets = <&ccu RST_BUS_SPDIF>;
- clock-names = "apb", "spdif";
- dmas = <&dma 2>;
- dma-names = "tx";
- status = "disabled";
- };
-
- pwm: pwm@01c21400 {
- compatible = "allwinner,sun8i-h3-pwm";
- reg = <0x01c21400 0x8>;
- clocks = <&osc24M>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- codec: codec@01c22c00 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun8i-h3-codec";
- reg = <0x01c22c00 0x400>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
- clock-names = "apb", "codec";
- resets = <&ccu RST_BUS_CODEC>;
- dmas = <&dma 15>, <&dma 15>;
- dma-names = "rx", "tx";
- allwinner,codec-analog-controls = <&codec_analog>;
- status = "disabled";
- };
-
- uart0: serial@01c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART0>;
- resets = <&ccu RST_BUS_UART0>;
- dmas = <&dma 6>, <&dma 6>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART1>;
- resets = <&ccu RST_BUS_UART1>;
- dmas = <&dma 7>, <&dma 7>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart2: serial@01c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART2>;
- resets = <&ccu RST_BUS_UART2>;
- dmas = <&dma 8>, <&dma 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART3>;
- resets = <&ccu RST_BUS_UART3>;
- dmas = <&dma 9>, <&dma 9>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C0>;
- resets = <&ccu RST_BUS_I2C0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C1>;
- resets = <&ccu RST_BUS_I2C1>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C2>;
- resets = <&ccu RST_BUS_I2C2>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- gic: interrupt-controller@01c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
- reg = <0x01c81000 0x1000>,
- <0x01c82000 0x2000>,
- <0x01c84000 0x2000>,
- <0x01c86000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- rtc: rtc@01f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- apb0_reset: reset@01f014b0 {
- reg = <0x01f014b0 0x4>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- #reset-cells = <1>;
- };
-
- codec_analog: codec-analog@01f015c0 {
- compatible = "allwinner,sun8i-h3-codec-analog";
- reg = <0x01f015c0 0x4>;
- };
-
- ir: ir@01f02000 {
- compatible = "allwinner,sun5i-a13-ir";
- clocks = <&apb0_gates 1>, <&ir_clk>;
- clock-names = "apb", "ir";
- resets = <&apb0_reset 1>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
- status = "disabled";
- };
-
- r_pio: pinctrl@01f02c00 {
- compatible = "allwinner,sun8i-h3-r-pinctrl";
- reg = <0x01f02c00 0x400>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
- clock-names = "apb", "hosc", "losc";
- resets = <&apb0_reset 0>;
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
-
- ir_pins_a: ir@0 {
- pins = "PL11";
- function = "s_cir_rx";
- };
- };
- };
+&pio {
+ compatible = "allwinner,sun8i-h3-pinctrl";
};
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 9112a20..3741ac7 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -47,7 +47,6 @@
#include "sun9i-a80.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubieboard4";
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 0fc3a87..85f1ad6 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -46,7 +46,6 @@
#include "sun9i-a80.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A80 Optimus Board";
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 15b6d122..759a723 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -46,8 +46,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
#include <dt-bindings/clock/sun9i-a80-ccu.h>
#include <dt-bindings/clock/sun9i-a80-de.h>
#include <dt-bindings/clock/sun9i-a80-usb.h>
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index 17c09fe..ce5c53e 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -43,7 +43,6 @@
*/
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
&pio {
ahci_pwr_pin_a: ahci_pwr_pin@0 {
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
new file mode 100644
index 0000000..1aeeacb
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -0,0 +1,601 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ iosc: internal-osc-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ clock-accuracy = <300000000>;
+ clock-output-names = "iosc";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun8i-h3-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
+ mmc0: mmc@01c0f000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c0f000 0x1000>;
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@01c10000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c10000 0x1000>;
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@01c11000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c11000 0x1000>;
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun8i-h3-musb";
+ reg = <0x01c19000 0x400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
+ usbphy: phy@01c19400 {
+ compatible = "allwinner,sun8i-h3-usb-phy";
+ reg = <0x01c19400 0x2c>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>,
+ <0x01c1c800 0x4>,
+ <0x01c1d800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1",
+ "pmu2",
+ "pmu3";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>,
+ <&ccu CLK_USB_PHY3>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy",
+ "usb3_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>,
+ <&ccu RST_USB_PHY3>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset",
+ "usb3_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@01c1a000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+ status = "disabled";
+ };
+
+ ohci0: usb@01c1a400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+ status = "disabled";
+ };
+
+ ehci1: usb@01c1b000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+ resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@01c1b400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1b400 0x100>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci2: usb@01c1c000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+ resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@01c1c400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci3: usb@01c1d000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1d000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+ resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci3: usb@01c1d400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1d400 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+ <&ccu CLK_USB_OHCI3>;
+ resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ccu: clock@01c20000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@01c20800 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ i2c0_pins: i2c0 {
+ pins = "PA11", "PA12";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ pins = "PA18", "PA19";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2 {
+ pins = "PE12", "PE13";
+ function = "i2c2";
+ };
+
+ mmc0_pins_a: mmc0@0 {
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc0_cd_pin: mmc0_cd_pin@0 {
+ pins = "PF6";
+ function = "gpio_in";
+ bias-pull-up;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_8bit_pins: mmc2_8bit {
+ pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+ "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ spdif_tx_pins_a: spdif@0 {
+ pins = "PA17";
+ function = "spdif";
+ };
+
+ spi0_pins: spi0 {
+ pins = "PC0", "PC1", "PC2", "PC3";
+ function = "spi0";
+ };
+
+ spi1_pins: spi1 {
+ pins = "PA15", "PA16", "PA14", "PA13";
+ function = "spi1";
+ };
+
+ uart0_pins_a: uart0@0 {
+ pins = "PA4", "PA5";
+ function = "uart0";
+ };
+
+ uart1_pins: uart1 {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ uart1_rts_cts_pins: uart1_rts_cts {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
+
+ uart2_pins: uart2 {
+ pins = "PA0", "PA1";
+ function = "uart2";
+ };
+
+ uart3_pins: uart3 {
+ pins = "PA13", "PA14";
+ function = "uart3";
+ };
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ spi0: spi@01c68000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c68000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c69000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c69000 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 24>, <&dma 24>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ wdt0: watchdog@01c20ca0 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spdif: spdif@01c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-spdif";
+ reg = <0x01c21000 0x400>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+ resets = <&ccu RST_BUS_SPDIF>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
+ pwm: pwm@01c21400 {
+ compatible = "allwinner,sun8i-h3-pwm";
+ reg = <0x01c21400 0x8>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ codec: codec@01c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-codec";
+ reg = <0x01c22c00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "codec";
+ resets = <&ccu RST_BUS_CODEC>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ allwinner,codec-analog-controls = <&codec_analog>;
+ status = "disabled";
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ dmas = <&dma 9>, <&dma 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x2000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ rtc: rtc@01f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x54>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ r_ccu: clock@1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ codec_analog: codec-analog@01f015c0 {
+ compatible = "allwinner,sun8i-h3-codec-analog";
+ reg = <0x01f015c0 0x4>;
+ };
+
+ ir: ir@01f02000 {
+ compatible = "allwinner,sun5i-a13-ir";
+ clocks = <&r_ccu 4>, <&r_ccu 11>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu 0>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x40>;
+ status = "disabled";
+ };
+
+ r_pio: pinctrl@01f02c00 {
+ compatible = "allwinner,sun8i-h3-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ ir_pins_a: ir@0 {
+ pins = "PL11";
+ function = "s_cir_rx";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
index b824146..245d0bc 100644
--- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
@@ -42,7 +42,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include "sunxi-common-regulators.dtsi"
&i2c0 {
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index 110031b..e0da4ee 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -52,11 +52,6 @@
model = "UniPhier LD4 Reference Board";
compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x20000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -71,6 +66,11 @@
i2c2 = &i2c2;
i2c3 = &i2c3;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
};
ðsc {
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index a7c494d..4f5fe15 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -43,10 +43,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
-
/ {
compatible = "socionext,uniphier-ld4";
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index c05d631..a397a88 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -52,11 +52,6 @@
model = "UniPhier LD6b Reference Board";
compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x80000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -73,6 +68,11 @@
i2c5 = &i2c5;
i2c6 = &i2c6;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
};
ðsc {
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index 8ee79da..246f35f 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -45,7 +45,7 @@
&pinctrl {
pinctrl_emmc: emmc_grp {
- groups = "emmc";
+ groups = "emmc", "emmc_dat8";
function = "emmc";
};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index 0ab0a40..fefc891 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -50,11 +50,6 @@
model = "UniPhier Pro4 Ace Board";
compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x40000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -70,6 +65,11 @@
i2c5 = &i2c5;
i2c6 = &i2c6;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
};
&serial0 {
@@ -90,6 +90,7 @@
eeprom@54 {
compatible = "st,24c64";
reg = <0x54>;
+ pagesize = <32>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 9e92e60..6077e63 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -52,11 +52,6 @@
model = "UniPhier Pro4 Reference Board";
compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x40000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -73,6 +68,11 @@
i2c5 = &i2c5;
i2c6 = &i2c6;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
};
ðsc {
diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
index dc4ea88..6c63c8b 100644
--- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -50,11 +50,6 @@
model = "UniPhier Pro4 Sanji Board";
compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x80000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -69,6 +64,11 @@
i2c5 = &i2c5;
i2c6 = &i2c6;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
};
&serial0 {
@@ -85,6 +85,7 @@
eeprom@54 {
compatible = "st,24c64";
reg = <0x54>;
+ pagesize = <32>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index e960b09..794a85a 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -43,10 +43,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
-
/ {
compatible = "socionext,uniphier-pro4";
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index dbc5e53..df07b55 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -43,10 +43,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
-
/ {
compatible = "socionext,uniphier-pro5";
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index 373818a..cccc866 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -51,11 +51,6 @@
compatible = "socionext,uniphier-pxs2-gentil",
"socionext,uniphier-pxs2";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x80000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -70,6 +65,11 @@
i2c5 = &i2c5;
i2c6 = &i2c6;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
};
&serial2 {
@@ -82,6 +82,7 @@
eeprom@54 {
compatible = "st,24c64";
reg = <0x54>;
+ pagesize = <32>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
index 51a3eac..803a39aa3 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -50,11 +50,6 @@
model = "UniPhier PXs2 Vodka Board";
compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x80000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -68,6 +63,11 @@
i2c5 = &i2c5;
i2c6 = &i2c6;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
};
&serial2 {
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index e9e031d..58c3e2f 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -43,10 +43,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
-
/ {
compatible = "socionext,uniphier-pxs2";
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
index f7df088..c62ae1a 100644
--- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
+++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
@@ -1,7 +1,8 @@
/*
* Device Tree Source for UniPhier Reference Daughter Board
*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -46,5 +47,6 @@
eeprom@50 {
compatible = "microchip,24lc128";
reg = <0x50>;
+ pagesize = <64>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts
index ac792ae0..eb63dcc 100644
--- a/arch/arm/boot/dts/uniphier-sld3-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld3-ref.dts
@@ -52,12 +52,6 @@
model = "UniPhier sLD3 Reference Board";
compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x20000000
- 0xc0000000 0x20000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -72,6 +66,12 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
};
+
+ memory@8000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000
+ 0xc0000000 0x20000000>;
+ };
};
ðsc {
diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi
index 9fad6bd..01d77ed 100644
--- a/arch/arm/boot/dts/uniphier-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld3.dtsi
@@ -43,10 +43,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
-
/ {
compatible = "socionext,uniphier-sld3";
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index a8291f9..737d276 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -52,11 +52,6 @@
model = "UniPhier sLD8 Reference Board";
compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x20000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -71,6 +66,11 @@
i2c2 = &i2c2;
i2c3 = &i2c3;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
};
ðsc {
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index b2c980e..eb06fdc 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -43,10 +43,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
-
/ {
compatible = "socionext,uniphier-sld8";
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
index 51ecc9b9..f61dfec 100644
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -1,7 +1,8 @@
/*
* Device Tree Source for UniPhier Support Card (Expansion Board)
*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -46,7 +47,7 @@
status = "okay";
ranges = <1 0x00000000 0x42000000 0x02000000>;
- support_card: support_card {
+ support_card: support_card@1,1f00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 3086efa..35714ff 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -71,7 +71,7 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
@@ -94,7 +94,7 @@
};
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -106,7 +106,7 @@
};
/* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@030000 {
+ v2m_i2c_pcie: i2c@30000 {
compatible = "arm,versatile-i2c";
reg = <0x030000 0x1000>;
@@ -119,7 +119,7 @@
};
};
- aaci@040000 {
+ aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
@@ -127,7 +127,7 @@
clock-names = "apb_pclk";
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
@@ -139,7 +139,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
@@ -147,7 +147,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
@@ -155,7 +155,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -163,7 +163,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -171,7 +171,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -179,7 +179,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -187,7 +187,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index c6393d3..1b6f639 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -70,7 +70,7 @@
#size-cells = <1>;
ranges = <0 7 0 0x20000>;
- v2m_sysreg: sysreg@00000 {
+ v2m_sysreg: sysreg@0 {
compatible = "arm,vexpress-sysreg";
reg = <0x00000 0x1000>;
@@ -93,7 +93,7 @@
};
};
- v2m_sysctl: sysctl@01000 {
+ v2m_sysctl: sysctl@1000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x01000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -105,7 +105,7 @@
};
/* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@02000 {
+ v2m_i2c_pcie: i2c@2000 {
compatible = "arm,versatile-i2c";
reg = <0x02000 0x1000>;
@@ -118,7 +118,7 @@
};
};
- aaci@04000 {
+ aaci@4000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x04000 0x1000>;
interrupts = <11>;
@@ -126,7 +126,7 @@
clock-names = "apb_pclk";
};
- mmci@05000 {
+ mmci@5000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
interrupts = <9 10>;
@@ -138,7 +138,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@06000 {
+ kmi@6000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x06000 0x1000>;
interrupts = <12>;
@@ -146,7 +146,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@07000 {
+ kmi@7000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x07000 0x1000>;
interrupts = <13>;
@@ -154,7 +154,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@09000 {
+ v2m_serial0: uart@9000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x09000 0x1000>;
interrupts = <5>;
@@ -162,7 +162,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a000 {
+ v2m_serial1: uart@a000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a000 0x1000>;
interrupts = <6>;
@@ -170,7 +170,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b000 {
+ v2m_serial2: uart@b000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b000 0x1000>;
interrupts = <7>;
@@ -178,7 +178,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c000 {
+ v2m_serial3: uart@c000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c000 0x1000>;
interrupts = <8>;
@@ -186,7 +186,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f000 {
+ wdt@f000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f000 0x1000>;
interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 15f4fd3..0c8de0c 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -220,7 +220,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index bd107c5..65ecf20 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -385,7 +385,7 @@
};
};
- etb@0,20010000 {
+ etb@20010000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0x20010000 0 0x1000>;
@@ -399,7 +399,7 @@
};
};
- tpiu@0,20030000 {
+ tpiu@20030000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0 0x20030000 0 0x1000>;
@@ -449,7 +449,7 @@
};
};
- funnel@0,20040000 {
+ funnel@20040000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
@@ -513,7 +513,7 @@
};
};
- ptm@0,2201c000 {
+ ptm@2201c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201c000 0 0x1000>;
@@ -527,7 +527,7 @@
};
};
- ptm@0,2201d000 {
+ ptm@2201d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201d000 0 0x1000>;
@@ -541,7 +541,7 @@
};
};
- etm@0,2203c000 {
+ etm@2203c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203c000 0 0x1000>;
@@ -555,7 +555,7 @@
};
};
- etm@0,2203d000 {
+ etm@2203d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203d000 0 0x1000>;
@@ -569,7 +569,7 @@
};
};
- etm@0,2203e000 {
+ etm@2203e000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203e000 0 0x1000>;
@@ -583,7 +583,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 1acecaf..6e69b8e 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -190,7 +190,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index b608a03..c9305b5 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -300,7 +300,7 @@
};
};
- smb@04000000 {
+ smb@4000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 7940408..37f9542 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -239,7 +239,7 @@
#size-cells = <0>;
reg = <4>;
- switch2: switch2@0 {
+ switch2: switch@0 {
compatible = "marvell,mv88e6085";
#address-cells = <1>;
#size-cells = <0>;
@@ -459,18 +459,6 @@
>;
};
- pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
- fsl,pins = <
- VF610_PAD_PTB5__GPIO_27 0x219d
- >;
- };
-
- pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
- fsl,pins = <
- VF610_PAD_PTB4__GPIO_26 0x219d
- >;
- };
-
pinctrl_mdio_mux: pinctrl-mdio-mux {
fsl,pins = <
VF610_PAD_PTA18__GPIO_8 0x31c2
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 6a45bd24..db3b408 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -67,11 +67,17 @@
switch0: switch@0 {
compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <512>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
ports {
#address-cells = <1>;
@@ -91,21 +97,25 @@
port@1 {
reg = <1>;
label = "lan1";
+ phy-handle = <&switch0phy1>;
};
port@2 {
reg = <2>;
label = "lan2";
+ phy-handle = <&switch0phy2>;
};
port@3 {
reg = <3>;
label = "lan3";
+ phy-handle = <&switch0phy3>;
};
port@4 {
reg = <4>;
label = "lan4";
+ phy-handle = <&switch0phy4>;
};
switch0port10: port@10 {
@@ -115,6 +125,35 @@
link = <&switch1port10>;
};
};
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy1: switch0phy@1 {
+ reg = <1>;
+ interrupt-parent = <&switch0>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch0phy2: switch0phy@2 {
+ reg = <2>;
+ interrupt-parent = <&switch0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch0phy3: switch0phy@3 {
+ reg = <3>;
+ interrupt-parent = <&switch0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch0phy4: switch0phy@4 {
+ reg = <4>;
+ interrupt-parent = <&switch0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
};
@@ -125,11 +164,17 @@
switch1: switch@0 {
compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch1>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsa,member = <0 1>;
eeprom-length = <512>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
ports {
#address-cells = <1>;
@@ -138,21 +183,25 @@
port@1 {
reg = <1>;
label = "lan5";
+ phy-handle = <&switch1phy1>;
};
port@2 {
reg = <2>;
label = "lan6";
+ phy-handle = <&switch1phy2>;
};
port@3 {
reg = <3>;
label = "lan7";
+ phy-handle = <&switch1phy3>;
};
port@4 {
reg = <4>;
label = "lan8";
+ phy-handle = <&switch1phy4>;
};
@@ -163,6 +212,34 @@
link = <&switch0port10>;
};
};
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1phy1: switch1phy@1 {
+ reg = <1>;
+ interrupt-parent = <&switch1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch1phy2: switch1phy@2 {
+ reg = <2>;
+ interrupt-parent = <&switch1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch1phy3: switch1phy@3 {
+ reg = <3>;
+ interrupt-parent = <&switch1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch1phy4: switch1phy@4 {
+ reg = <4>;
+ interrupt-parent = <&switch1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index ca9e1bc..6b58d3a9 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -296,6 +296,18 @@
>;
};
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTB5__GPIO_27 0x219d
+ >;
+ };
+
+ pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+ fsl,pins = <
+ VF610_PAD_PTB4__GPIO_26 0x219d
+ >;
+ };
+
pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
fsl,pins = <
VF610_PAD_PTE14__GPIO_119 0x31c2
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 9353184..1181053 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,6 +1,3 @@
-config ICST
- bool
-
config SA1111
bool
select DMABOUNCE if !ARCH_PXA
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 27f23b1..29fdf6a 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -4,7 +4,6 @@
obj-y += firmware.o
-obj-$(CONFIG_ICST) += icst.o
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index d25010e..cfc2465 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -1,6 +1,6 @@
CONFIG_KERNEL_XZ=y
+# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_USELIB=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
@@ -8,39 +8,65 @@
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
CONFIG_BPF_SYSCALL=y
-# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_CC_STACKPROTECTOR_STRONG=y
+CONFIG_JUMP_LABEL=y
+CONFIG_GCC_PLUGINS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLOCK is not set
+# CONFIG_LBDAF is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G4=y
CONFIG_AEABI=y
-CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_CPU_SW_DOMAIN_PAN is not set
+# CONFIG_COMPACTION is not set
CONFIG_SECCOMP=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_KEXEC=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
CONFIG_NET_NCSI=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_PARTITIONED_MASTER=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_SPI_ASPEED_SMC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_ASPEED_LPC_CTRL=y
+CONFIG_EEPROM_AT24=y
CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=y
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_ARC is not set
@@ -63,9 +89,10 @@
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_BROADCOM_PHY=y
+CONFIG_REALTEK_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
@@ -81,35 +108,74 @@
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_ASPEED_BT_IPMI_BMC=y
# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA9541=y
+CONFIG_I2C_MUX_PCA954x=y
CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_ASPEED=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_W1=y
+CONFIG_W1_MASTER_GPIO=y
+CONFIG_W1_SLAVE_THERM=y
+CONFIG_SENSORS_ASPEED=y
+CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_NCT7904=y
+CONFIG_PMBUS=y
+CONFIG_SENSORS_ADM1275=y
+CONFIG_SENSORS_LM25066=y
+CONFIG_SENSORS_UCD9000=y
+CONFIG_SENSORS_TMP421=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8523=y
+CONFIG_RTC_DRV_RV8803=y
+CONFIG_MAILBOX=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_ASPEED_ADC=y
+CONFIG_BMP280=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FANOTIFY=y
+CONFIG_OVERLAY_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_PAGE_POISONING=y
-CONFIG_DEBUG_KMEMLEAK=y
-CONFIG_DEBUG_SHIRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_WQ_WATCHDOG=y
+CONFIG_PANIC_TIMEOUT=-1
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_STACK_END_CHECK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
+CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_MEMTEST=y
-CONFIG_UBSAN=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
-CONFIG_DEBUG_UART_PHYS=0x1e784000
-CONFIG_DEBUG_UART_VIRT=0xe8784000
-CONFIG_EARLY_PRINTK=y
-CONFIG_STRICT_MODULE_RWX=y
-CONFIG_STRICT_KERNEL_RWX=y
+# CONFIG_CRYPTO_ECHAINIV is not set
+# CONFIG_CRYPTO_HW is not set
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index 5f660b0..3c20d93 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -1,6 +1,6 @@
CONFIG_KERNEL_XZ=y
+# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_USELIB=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
@@ -8,27 +8,28 @@
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
CONFIG_BPF_SYSCALL=y
-# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_CC_STACKPROTECTOR_STRONG=y
+CONFIG_JUMP_LABEL=y
+CONFIG_GCC_PLUGINS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLOCK is not set
+# CONFIG_LBDAF is not set
CONFIG_ARCH_MULTI_V6=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G5=y
+# CONFIG_CACHE_L2X0 is not set
CONFIG_VMSPLIT_2G=y
CONFIG_AEABI=y
-CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_CPU_SW_DOMAIN_PAN is not set
+# CONFIG_COMPACTION is not set
CONFIG_SECCOMP=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -38,15 +39,37 @@
CONFIG_KEXEC=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
CONFIG_NET_NCSI=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_PARTITIONED_MASTER=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_SPI_ASPEED_SMC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_ASPEED_LPC_CTRL=y
+CONFIG_EEPROM_AT24=y
CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=y
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_ARC is not set
@@ -69,9 +92,10 @@
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_BROADCOM_PHY=y
+CONFIG_REALTEK_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
@@ -87,37 +111,74 @@
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_ASPEED_BT_IPMI_BMC=y
# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA9541=y
+CONFIG_I2C_MUX_PCA954x=y
CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_ASPEED=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_W1=y
+CONFIG_W1_MASTER_GPIO=y
+CONFIG_W1_SLAVE_THERM=y
+CONFIG_SENSORS_ASPEED=y
+CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_NCT7904=y
+CONFIG_PMBUS=y
+CONFIG_SENSORS_ADM1275=y
+CONFIG_SENSORS_LM25066=y
+CONFIG_SENSORS_UCD9000=y
+CONFIG_SENSORS_TMP421=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8523=y
+CONFIG_RTC_DRV_RV8803=y
+CONFIG_MAILBOX=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_ASPEED_ADC=y
+CONFIG_BMP280=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FANOTIFY=y
+CONFIG_OVERLAY_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_PAGE_POISONING=y
-CONFIG_DEBUG_KMEMLEAK=y
-CONFIG_DEBUG_SHIRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_WQ_WATCHDOG=y
+CONFIG_PANIC_TIMEOUT=-1
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_STACK_END_CHECK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
+CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_MEMTEST=y
-CONFIG_UBSAN=y
-CONFIG_UBSAN_ALIGNMENT=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
-CONFIG_DEBUG_UART_PHYS=0x1e784000
-CONFIG_DEBUG_UART_VIRT=0xe8784000
-CONFIG_EARLY_PRINTK=y
-CONFIG_STRICT_MODULE_RWX=y
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_CRYPTO_ECHAINIV=y
+# CONFIG_CRYPTO_ECHAINIV is not set
+# CONFIG_CRYPTO_HW is not set
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 4b89f4e..3ba8cd3 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -1,6 +1,5 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
@@ -32,6 +31,7 @@
CONFIG_AEABI=y
CONFIG_KSM=y
CONFIG_CLEANCACHE=y
+CONFIG_CMA=y
CONFIG_SECCOMP=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
@@ -52,6 +52,7 @@
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
+CONFIG_DMA_CMA=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
@@ -62,7 +63,6 @@
CONFIG_ZD1211RW=y
CONFIG_INPUT_EVDEV=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y
@@ -92,6 +92,7 @@
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c8663ea..67db829 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -74,12 +74,10 @@
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_EEPROM_AT24=y
-CONFIG_IDE=m
-CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_ATA=m
CONFIG_AHCI_DA850=m
+CONFIG_PATA_BK3710=m
CONFIG_NETDEVICES=y
CONFIG_NETCONSOLE=y
CONFIG_TUN=m
@@ -121,6 +119,7 @@
CONFIG_PINCTRL_SINGLE=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_WATCHDOG=y
@@ -133,9 +132,11 @@
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=m
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_ADV7343=m
CONFIG_DRM=m
CONFIG_DRM_TILCDC=m
CONFIG_DRM_DUMB_VGA_DAC=m
@@ -204,12 +205,10 @@
CONFIG_TI_AEMIF=m
CONFIG_DA8XX_DDRCTL=y
CONFIG_IIO=m
-CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
-CONFIG_IIO_KFIFO_BUF=m
-CONFIG_IIO_TRIGGER=y
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
+CONFIG_TI_ADS7950=m
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
CONFIG_PWM=y
diff --git a/arch/arm/configs/dram_0xd0000000.config b/arch/arm/configs/dram_0xd0000000.config
new file mode 100644
index 0000000..61ba704
--- /dev/null
+++ b/arch/arm/configs/dram_0xd0000000.config
@@ -0,0 +1 @@
+CONFIG_DRAM_BASE=0xd0000000
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 742baf0..6dc661c 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -53,7 +53,7 @@
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_CMA_SIZE_MBYTES=96
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
@@ -240,7 +240,7 @@
CONFIG_PWM_SAMSUNG=y
CONFIG_PHY_EXYNOS5250_SATA=y
CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
@@ -255,6 +255,7 @@
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index eaba3b1..bb6fa56 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -143,6 +143,7 @@
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_AT803X_PHY=y
CONFIG_MICREL_PHY=y
+CONFIG_SMSC_PHY=y
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
@@ -152,7 +153,6 @@
CONFIG_WL12XX=m
CONFIG_WLCORE_SDIO=m
# CONFIG_WILINK_PLATFORM_DATA is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
CONFIG_KEYBOARD_GPIO=y
@@ -165,6 +165,7 @@
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
+CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
@@ -173,6 +174,7 @@
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
+CONFIG_HID_MULTITOUCH=y
CONFIG_SERIO_SERPORT=m
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_IMX=y
@@ -376,7 +378,6 @@
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6aa7be1..2685e03 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -195,7 +195,7 @@
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_OMAP_OCP2SCP=y
CONFIG_SIMPLE_PM_BUS=y
-CONFIG_SUNXI_RSB=m
+CONFIG_SUNXI_RSB=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
@@ -482,9 +482,10 @@
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_BCM590XX=y
+CONFIG_MFD_AC100=y
CONFIG_MFD_AXP20X=y
-CONFIG_MFD_AXP20X_I2C=m
-CONFIG_MFD_AXP20X_RSB=m
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X_RSB=y
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC_SPI=m
@@ -513,7 +514,7 @@
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
-CONFIG_REGULATOR_AXP20X=m
+CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_FAN53555=y
@@ -593,10 +594,10 @@
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_ROCKCHIP=m
-CONFIG_ROCKCHIP_ANALOGIX_DP=m
-CONFIG_ROCKCHIP_DW_HDMI=m
-CONFIG_ROCKCHIP_DW_MIPI_DSI=m
-CONFIG_ROCKCHIP_INNO_HDMI=m
+CONFIG_ROCKCHIP_ANALOGIX_DP=y
+CONFIG_ROCKCHIP_DW_HDMI=y
+CONFIG_ROCKCHIP_DW_MIPI_DSI=y
+CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_DRM_ATMEL_HLCDC=m
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_RCAR_HDMI=y
@@ -730,6 +731,7 @@
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
@@ -751,6 +753,7 @@
CONFIG_EDAC_HIGHBANK_MC=y
CONFIG_EDAC_HIGHBANK_L2=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AC100=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_HYM8563=m
@@ -883,7 +886,7 @@
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_ROCKCHIP_DP=m
-CONFIG_PHY_ROCKCHIP_USB=m
+CONFIG_PHY_ROCKCHIP_USB=y
CONFIG_PHY_QCOM_APQ8064_SATA=m
CONFIG_PHY_MIPHY28LP=y
CONFIG_PHY_RCAR_GEN2=m
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index decd388..a120ae8 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -64,6 +64,7 @@
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPUFREQ_DT=m
+CONFIG_ARM_TI_CPUFREQ=y
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_BINFMT_MISC=y
@@ -141,6 +142,7 @@
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_DM816=m
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
@@ -167,8 +169,18 @@
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_AT803X_PHY=y
+CONFIG_DP83848_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_SMSC_PHY=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
@@ -176,6 +188,7 @@
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
+CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_CDC_PHONET=m
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
@@ -199,6 +212,7 @@
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
CONFIG_TOUCHSCREEN_PIXCIR=m
@@ -206,6 +220,7 @@
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_INPUT_MISC=y
+CONFIG_INPUT_CPCAP_PWRBUTTON=m
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_PALMAS_PWRBUTTON=m
@@ -241,6 +256,7 @@
CONFIG_HDQ_MASTER_OMAP=m
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
CONFIG_BATTERY_BQ27XXX=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_TWL4030=m
@@ -263,6 +279,7 @@
CONFIG_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
+CONFIG_MFD_CPCAP=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
@@ -270,7 +287,9 @@
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_CPCAP=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_PALMAS=y
@@ -339,6 +358,7 @@
CONFIG_SND_EDMA_SOC=m
CONFIG_SND_AM33XX_SOC_EVM=m
CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
@@ -354,6 +374,7 @@
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_WDM=m
+CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=m
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_TUSB6010=m
@@ -402,6 +423,7 @@
CONFIG_MMC_OMAP_HS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CPCAP=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_PWM=m
@@ -420,6 +442,7 @@
CONFIG_RTC_DRV_TWL4030=m
CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_OMAP=m
+CONFIG_RTC_DRV_CPCAP=m
CONFIG_DMADEVICES=y
CONFIG_DMA_OMAP=y
CONFIG_TI_EDMA=y
@@ -432,6 +455,7 @@
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
+CONFIG_CPCAP_ADC=m
CONFIG_TI_AM335X_ADC=m
CONFIG_BMP280=m
CONFIG_PWM=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 4ffdd60..07666a7 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -190,11 +190,18 @@
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_REMOTEPROC=y
+CONFIG_QCOM_ADSP_PIL=y
+CONFIG_QCOM_Q6V5_PIL=y
+CONFIG_QCOM_WCNSS_PIL=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_SW_TRIGGER=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 030264c..2620ce7 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -71,6 +71,7 @@
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
+CONFIG_ALTERA_TSE=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IXGBE=m
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 03437f8..a097538 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -20,6 +20,7 @@
# CONFIG_MMU is not set
CONFIG_ARM_SINGLE_ARMV7M=y
CONFIG_ARCH_STM32=y
+CONFIG_CPU_V7M_NUM_IRQ=240
CONFIG_SET_MEM_PARAM=y
CONFIG_DRAM_BASE=0x90000000
CONFIG_FLASH_MEM_BASE=0x08000000
@@ -47,6 +48,9 @@
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_STM32F4=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index da92c25..5cd5dd70 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -87,6 +87,7 @@
CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
+CONFIG_MFD_AC100=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
@@ -129,6 +130,7 @@
CONFIG_RTC_CLASS=y
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_DRV_AC100=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_DMADEVICES=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 02454fa..d69bebf 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -478,26 +478,6 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
: : : "r0","r1","r2","r3","r4","r5","r6","r7", \
"r9","r10","lr","memory" )
-#ifdef CONFIG_MMU
-int set_memory_ro(unsigned long addr, int numpages);
-int set_memory_rw(unsigned long addr, int numpages);
-int set_memory_x(unsigned long addr, int numpages);
-int set_memory_nx(unsigned long addr, int numpages);
-#else
-static inline int set_memory_ro(unsigned long addr, int numpages) { return 0; }
-static inline int set_memory_rw(unsigned long addr, int numpages) { return 0; }
-static inline int set_memory_x(unsigned long addr, int numpages) { return 0; }
-static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
-#endif
-
-#ifdef CONFIG_STRICT_KERNEL_RWX
-void set_kernel_text_rw(void);
-void set_kernel_text_ro(void);
-#else
-static inline void set_kernel_text_rw(void) { }
-static inline void set_kernel_text_ro(void) { }
-#endif
-
void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
void *kaddr, unsigned long len);
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 42871fb..2cfbc53 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -187,6 +187,16 @@ static inline void pci_ioremap_set_mem_type(int mem_type) {}
extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
/*
+ * PCI configuration space mapping function.
+ *
+ * The PCI specification does not allow configuration write
+ * transactions to be posted. Add an arch specific
+ * pci_remap_cfgspace() definition that is implemented
+ * through strongly ordered memory mappings.
+ */
+#define pci_remap_cfgspace pci_remap_cfgspace
+void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size);
+/*
* Now, pick up the machine-defined IO definitions
*/
#ifdef CONFIG_NEED_MACH_IO_H
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 057d381..396c92b 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -29,8 +29,7 @@ static inline int pci_proc_domain(struct pci_bus *bus)
#define PCI_DMA_BUS_IS_PHYS (1)
#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
diff --git a/arch/arm/include/asm/set_memory.h b/arch/arm/include/asm/set_memory.h
new file mode 100644
index 0000000..5aa4315
--- /dev/null
+++ b/arch/arm/include/asm/set_memory.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASMARM_SET_MEMORY_H
+#define _ASMARM_SET_MEMORY_H
+
+#ifdef CONFIG_MMU
+int set_memory_ro(unsigned long addr, int numpages);
+int set_memory_rw(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
+int set_memory_nx(unsigned long addr, int numpages);
+#else
+static inline int set_memory_ro(unsigned long addr, int numpages) { return 0; }
+static inline int set_memory_rw(unsigned long addr, int numpages) { return 0; }
+static inline int set_memory_x(unsigned long addr, int numpages) { return 0; }
+static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
+#endif
+
+#ifdef CONFIG_STRICT_KERNEL_RWX
+void set_kernel_text_rw(void);
+void set_kernel_text_ro(void);
+#else
+static inline void set_kernel_text_rw(void) { }
+static inline void set_kernel_text_ro(void) { }
+#endif
+
+#endif
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 9113d7b..52aaed2 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -22,7 +22,8 @@
#define UARTA_3390 REG_PHYS_ADDR(0x40a900)
#define UARTA_7250 REG_PHYS_ADDR(0x40b400)
-#define UARTA_7268 REG_PHYS_ADDR(0x40c000)
+#define UARTA_7260 REG_PHYS_ADDR(0x40c000)
+#define UARTA_7268 UARTA_7260
#define UARTA_7271 UARTA_7268
#define UARTA_7364 REG_PHYS_ADDR(0x40b000)
#define UARTA_7366 UARTA_7364
@@ -62,13 +63,14 @@
/* Chip specific detection starts here */
20: checkuart(\rp, \rv, 0x33900000, 3390)
21: checkuart(\rp, \rv, 0x72500000, 7250)
-22: checkuart(\rp, \rv, 0x72680000, 7268)
-23: checkuart(\rp, \rv, 0x72710000, 7271)
-24: checkuart(\rp, \rv, 0x73640000, 7364)
-25: checkuart(\rp, \rv, 0x73660000, 7366)
-26: checkuart(\rp, \rv, 0x07437100, 74371)
-27: checkuart(\rp, \rv, 0x74390000, 7439)
-28: checkuart(\rp, \rv, 0x74450000, 7445)
+22: checkuart(\rp, \rv, 0x72600000, 7260)
+23: checkuart(\rp, \rv, 0x72680000, 7268)
+24: checkuart(\rp, \rv, 0x72710000, 7271)
+25: checkuart(\rp, \rv, 0x73640000, 7364)
+26: checkuart(\rp, \rv, 0x73660000, 7366)
+27: checkuart(\rp, \rv, 0x07437100, 74371)
+28: checkuart(\rp, \rv, 0x74390000, 7439)
+29: checkuart(\rp, \rv, 0x74450000, 7445)
/* No valid UART found */
90: mov \rp, #0
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 2f0e077..b259956 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -597,25 +597,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
return start;
}
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- if (mmap_state == pci_mmap_io)
- return -EINVAL;
-
- /*
- * Mark this as IO
- */
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot))
- return -EAGAIN;
-
- return 0;
-}
-
void __init pci_map_io_early(unsigned long pfn)
{
struct map_desc pci_io_desc = {
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 414e60e..833c991 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -21,6 +21,7 @@
#include <asm/opcodes.h>
#include <asm/ftrace.h>
#include <asm/insn.h>
+#include <asm/set_memory.h>
#ifdef CONFIG_THUMB2_KERNEL
#define NOP 0xf85deb04 /* pop.w {lr} */
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index 9232cae..1bb4c40 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -269,7 +269,7 @@ int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
/*
* Register our undef instruction hooks with ARM undef core.
- * We regsiter a hook specifically looking for the KGB break inst
+ * We register a hook specifically looking for the KGB break inst
* and we handle the normal undef case within the do_undefinstr
* handler.
*/
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index b18c1ea..1549588 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -18,6 +18,7 @@
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
#include <asm/system_misc.h>
+#include <asm/set_memory.h>
extern void relocate_new_kernel(void);
extern const unsigned int relocate_new_kernel_size;
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c5bbf8b..cfd8f60 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,7 +1,6 @@
#
# Makefile for the linux kernel.
#
-obj-y := soc.o
# CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
@@ -18,3 +17,36 @@
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
endif
+
+# Default sed regexp - multiline due to syntax constraints
+define sed-y
+ "/^->/{s:->#\(.*\):/* \1 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:->::; p;}"
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+ (set -e; \
+ echo "#ifndef $2"; \
+ echo "#define $2"; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by Kbuild"; \
+ echo " */"; \
+ echo ""; \
+ sed -ne $(sed-y); \
+ echo ""; \
+ echo "#endif" )
+endef
+
+arch/arm/mach-at91/pm_data-offsets.s: arch/arm/mach-at91/pm_data-offsets.c
+ $(call if_changed_dep,cc_s_c)
+
+include/generated/at91_pm_data-offsets.h: arch/arm/mach-at91/pm_data-offsets.s FORCE
+ $(call filechk,offsets,__PM_DATA_OFFSETS_H__)
+
+arch/arm/mach-at91/pm_suspend.o: include/generated/at91_pm_data-offsets.h
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d068ec3..656ad40 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -14,23 +14,10 @@
#include <asm/mach/arch.h>
#include "generic.h"
-#include "soc.h"
-
-static const struct at91_soc rm9200_socs[] = {
- AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
- { /* sentinel */ },
-};
static void __init at91rm9200_dt_device_init(void)
{
- struct soc_device *soc;
- struct device *soc_dev = NULL;
-
- soc = at91_soc_init(rm9200_socs);
- if (soc != NULL)
- soc_dev = soc_device_to_device(soc);
-
- of_platform_default_populate(NULL, NULL, soc_dev);
+ of_platform_default_populate(NULL, NULL, NULL);
at91rm9200_pm_init();
}
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index ba28e9c..3dbdef4 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -14,60 +14,12 @@
#include <asm/system_misc.h>
#include "generic.h"
-#include "soc.h"
-static const struct at91_soc at91sam9_socs[] = {
- AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
- AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
- AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
- AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
- AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
- "at91sam9m11", "at91sam9g45"),
- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
- "at91sam9m10", "at91sam9g45"),
- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
- "at91sam9g46", "at91sam9g45"),
- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
- "at91sam9g45", "at91sam9g45"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
- "at91sam9g15", "at91sam9x5"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
- "at91sam9g35", "at91sam9x5"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
- "at91sam9x35", "at91sam9x5"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
- "at91sam9g25", "at91sam9x5"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
- "at91sam9x25", "at91sam9x5"),
- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
- "at91sam9cn12", "at91sam9n12"),
- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
- "at91sam9n12", "at91sam9n12"),
- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
- "at91sam9cn11", "at91sam9n12"),
- AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
- AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
- AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
- { /* sentinel */ },
-};
-
-static void __init at91sam9_common_init(void)
+static void __init at91sam9_init(void)
{
- struct soc_device *soc;
- struct device *soc_dev = NULL;
+ of_platform_default_populate(NULL, NULL, NULL);
- soc = at91_soc_init(at91sam9_socs);
- if (soc != NULL)
- soc_dev = soc_device_to_device(soc);
-
- of_platform_default_populate(NULL, NULL, soc_dev);
-}
-
-static void __init at91sam9_dt_device_init(void)
-{
- at91sam9_common_init();
- at91sam9260_pm_init();
+ at91sam9_pm_init();
}
static const char *const at91_dt_board_compat[] __initconst = {
@@ -77,41 +29,6 @@ static const char *const at91_dt_board_compat[] __initconst = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
- .init_machine = at91sam9_dt_device_init,
+ .init_machine = at91sam9_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
-
-static void __init at91sam9g45_dt_device_init(void)
-{
- at91sam9_common_init();
- at91sam9g45_pm_init();
-}
-
-static const char *const at91sam9g45_board_compat[] __initconst = {
- "atmel,at91sam9g45",
- NULL
-};
-
-DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
- /* Maintainer: Atmel */
- .init_machine = at91sam9g45_dt_device_init,
- .dt_compat = at91sam9g45_board_compat,
-MACHINE_END
-
-static void __init at91sam9x5_dt_device_init(void)
-{
- at91sam9_common_init();
- at91sam9x5_pm_init();
-}
-
-static const char *const at91sam9x5_board_compat[] __initconst = {
- "atmel,at91sam9x5",
- "atmel,at91sam9n12",
- NULL
-};
-
-DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
- /* Maintainer: Atmel */
- .init_machine = at91sam9x5_dt_device_init,
- .dt_compat = at91sam9x5_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 28ca57a..f1ead0f 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -13,15 +13,11 @@
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
-extern void __init at91sam9260_pm_init(void);
-extern void __init at91sam9g45_pm_init(void);
-extern void __init at91sam9x5_pm_init(void);
+extern void __init at91sam9_pm_init(void);
extern void __init sama5_pm_init(void);
#else
static inline void __init at91rm9200_pm_init(void) { }
-static inline void __init at91sam9260_pm_init(void) { }
-static inline void __init at91sam9g45_pm_init(void) { }
-static inline void __init at91sam9x5_pm_init(void) { }
+static inline void __init at91sam9_pm_init(void) { }
static inline void __init sama5_pm_init(void) { }
#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index a277981..2cd27c8 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -10,35 +10,22 @@
* (at your option) any later version.
*/
-#include <linux/gpio.h>
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
#include <linux/genalloc.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/atmel.h>
-#include <linux/io.h>
+#include <linux/suspend.h>
+
#include <linux/clk/at91_pmc.h>
-#include <asm/irq.h>
-#include <linux/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/fncpy.h>
#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include "generic.h"
#include "pm.h"
-static void __iomem *pmc;
-
/*
* FIXME: this is needed to communicate between the pinctrl driver and
* the PM implementation in the machine. Possibly part of the PM
@@ -50,12 +37,13 @@ extern void at91_pinctrl_gpio_suspend(void);
extern void at91_pinctrl_gpio_resume(void);
#endif
-static struct {
- unsigned long uhp_udp_mask;
- int memctrl;
-} at91_pm_data;
+static struct at91_pm_data pm_data;
-static void __iomem *at91_ramc_base[2];
+#define at91_ramc_read(id, field) \
+ __raw_readl(pm_data.ramc[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+ __raw_writel(value, pm_data.ramc[id] + field)
static int at91_pm_valid_state(suspend_state_t state)
{
@@ -91,10 +79,10 @@ static int at91_pm_verify_clocks(void)
unsigned long scsr;
int i;
- scsr = readl(pmc + AT91_PMC_SCSR);
+ scsr = readl(pm_data.pmc + AT91_PMC_SCSR);
/* USB must not be using PLLB */
- if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
+ if ((scsr & pm_data.uhp_udp_mask) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
@@ -105,7 +93,7 @@ static int at91_pm_verify_clocks(void)
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
continue;
- css = readl(pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+ css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
if (css != AT91_PMC_CSS_SLOW) {
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
return 0;
@@ -131,25 +119,18 @@ int at91_suspend_entering_slow_clock(void)
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
- void __iomem *ramc1, int memctrl);
-
-extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
- void __iomem *ramc1, int memctrl);
+static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
+extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
extern u32 at91_pm_suspend_in_sram_sz;
static void at91_pm_suspend(suspend_state_t state)
{
- unsigned int pm_data = at91_pm_data.memctrl;
-
- pm_data |= (state == PM_SUSPEND_MEM) ?
- AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+ pm_data.mode = (state == PM_SUSPEND_MEM) ? AT91_PM_SLOW_CLOCK : 0;
flush_cache_all();
outer_disable();
- at91_suspend_sram_fn(pmc, at91_ramc_base[0],
- at91_ramc_base[1], pm_data);
+ at91_suspend_sram_fn(&pm_data);
outer_resume();
}
@@ -224,12 +205,6 @@ static struct platform_device at91_cpuidle_device = {
.name = "cpuidle-at91",
};
-static void at91_pm_set_standby(void (*at91_standby)(void))
-{
- if (at91_standby)
- at91_cpuidle_device.dev.platform_data = at91_standby;
-}
-
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
* terminate self-refresh automatically on the next SDRAM access.
@@ -241,20 +216,15 @@ static void at91_pm_set_standby(void (*at91_standby)(void))
*/
static void at91rm9200_standby(void)
{
- u32 lpr = at91_ramc_read(0, AT91_MC_SDRAMC_LPR);
-
asm volatile(
"b 1f\n\t"
".align 5\n\t"
"1: mcr p15, 0, %0, c7, c10, 4\n\t"
- " str %0, [%1, %2]\n\t"
- " str %3, [%1, %4]\n\t"
+ " str %2, [%1, %3]\n\t"
" mcr p15, 0, %0, c7, c0, 4\n\t"
- " str %5, [%1, %2]"
:
- : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91_MC_SDRAMC_LPR),
- "r" (1), "r" (AT91_MC_SDRAMC_SRR),
- "r" (lpr));
+ : "r" (0), "r" (pm_data.ramc[0]),
+ "r" (1), "r" (AT91_MC_SDRAMC_SRR));
}
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
@@ -265,12 +235,27 @@ static void at91_ddr_standby(void)
/* Those two values allow us to delay self-refresh activation
* to the maximum. */
u32 lpr0, lpr1 = 0;
+ u32 mdr, saved_mdr0, saved_mdr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
- if (at91_ramc_base[1]) {
+ /* LPDDR1 --> force DDR2 mode during self-refresh */
+ saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR);
+ if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
+ mdr = saved_mdr0 & ~AT91_DDRSDRC_MD;
+ mdr |= AT91_DDRSDRC_MD_DDR2;
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
+ }
+
+ if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+ saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR);
+ if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
+ mdr = saved_mdr1 & ~AT91_DDRSDRC_MD;
+ mdr |= AT91_DDRSDRC_MD_DDR2;
+ at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr);
+ }
}
saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
@@ -279,14 +264,17 @@ static void at91_ddr_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_ramc_base[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
cpu_do_idle();
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
+ if (pm_data.ramc[1]) {
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+ }
}
static void sama5d3_ddr_standby(void)
@@ -313,7 +301,7 @@ static void at91sam9_sdram_standby(void)
u32 lpr0, lpr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
- if (at91_ramc_base[1]) {
+ if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
@@ -325,21 +313,33 @@ static void at91sam9_sdram_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_ramc_base[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
}
+struct ramc_info {
+ void (*idle)(void);
+ unsigned int memctrl;
+};
+
+static const struct ramc_info ramc_infos[] __initconst = {
+ { .idle = at91rm9200_standby, .memctrl = AT91_MEMCTRL_MC},
+ { .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
+ { .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+ { .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+};
+
static const struct of_device_id const ramc_ids[] __initconst = {
- { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
- { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
- { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
- { .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby },
+ { .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
+ { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
+ { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
+ { .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
{ /*sentinel*/ }
};
@@ -348,15 +348,18 @@ static __init void at91_dt_ramc(void)
struct device_node *np;
const struct of_device_id *of_id;
int idx = 0;
- const void *standby = NULL;
+ void *standby = NULL;
+ const struct ramc_info *ramc;
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
- at91_ramc_base[idx] = of_iomap(np, 0);
- if (!at91_ramc_base[idx])
+ pm_data.ramc[idx] = of_iomap(np, 0);
+ if (!pm_data.ramc[idx])
panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+ ramc = of_id->data;
if (!standby)
- standby = of_id->data;
+ standby = ramc->idle;
+ pm_data.memctrl = ramc->memctrl;
idx++;
}
@@ -369,7 +372,7 @@ static __init void at91_dt_ramc(void)
return;
}
- at91_pm_set_standby(standby);
+ at91_cpuidle_device.dev.platform_data = standby;
}
static void at91rm9200_idle(void)
@@ -378,12 +381,12 @@ static void at91rm9200_idle(void)
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
- writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
}
static void at91sam9_idle(void)
{
- writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
cpu_do_idle();
}
@@ -433,31 +436,46 @@ static void __init at91_pm_sram_init(void)
&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
}
+struct pmc_info {
+ unsigned long uhp_udp_mask;
+};
+
+static const struct pmc_info pmc_infos[] __initconst = {
+ { .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
+ { .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
+ { .uhp_udp_mask = AT91SAM926x_PMC_UHP },
+};
+
static const struct of_device_id atmel_pmc_ids[] __initconst = {
- { .compatible = "atmel,at91rm9200-pmc" },
- { .compatible = "atmel,at91sam9260-pmc" },
- { .compatible = "atmel,at91sam9g45-pmc" },
- { .compatible = "atmel,at91sam9n12-pmc" },
- { .compatible = "atmel,at91sam9x5-pmc" },
- { .compatible = "atmel,sama5d3-pmc" },
- { .compatible = "atmel,sama5d2-pmc" },
+ { .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] },
+ { .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] },
+ { .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
{ /* sentinel */ },
};
static void __init at91_pm_init(void (*pm_idle)(void))
{
struct device_node *pmc_np;
+ const struct of_device_id *of_id;
+ const struct pmc_info *pmc;
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
- pmc_np = of_find_matching_node(NULL, atmel_pmc_ids);
- pmc = of_iomap(pmc_np, 0);
- if (!pmc) {
+ pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
+ pm_data.pmc = of_iomap(pmc_np, 0);
+ if (!pm_data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
}
+ pmc = of_id->data;
+ pm_data.uhp_udp_mask = pmc->uhp_udp_mask;
+
if (pm_idle)
arm_pm_idle = pm_idle;
@@ -478,40 +496,17 @@ void __init at91rm9200_pm_init(void)
*/
at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
- at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_MC;
-
at91_pm_init(at91rm9200_idle);
}
-void __init at91sam9260_pm_init(void)
+void __init at91sam9_pm_init(void)
{
at91_dt_ramc();
- at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_init(at91sam9_idle);
-}
-
-void __init at91sam9g45_pm_init(void)
-{
- at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
- at91_pm_init(at91sam9_idle);
-}
-
-void __init at91sam9x5_pm_init(void)
-{
- at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(at91sam9_idle);
}
void __init sama5_pm_init(void)
{
at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(NULL);
}
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index bf980c6..fc0f7d0 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -17,24 +17,20 @@
#include <soc/at91/at91sam9_ddrsdr.h>
#include <soc/at91/at91sam9_sdramc.h>
-#ifndef __ASSEMBLY__
-#define at91_ramc_read(id, field) \
- __raw_readl(at91_ramc_base[id] + field)
-
-#define at91_ramc_write(id, field, value) \
- __raw_writel(value, at91_ramc_base[id] + field)
-#endif
-
#define AT91_MEMCTRL_MC 0
#define AT91_MEMCTRL_SDRAMC 1
#define AT91_MEMCTRL_DDRSDR 2
-#define AT91_PM_MEMTYPE_MASK 0x0f
-
-#define AT91_PM_MODE_OFFSET 4
-#define AT91_PM_MODE_MASK 0x01
-#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
-
#define AT91_PM_SLOW_CLOCK 0x01
+#ifndef __ASSEMBLY__
+struct at91_pm_data {
+ void __iomem *pmc;
+ void __iomem *ramc[2];
+ unsigned long uhp_udp_mask;
+ unsigned int memctrl;
+ unsigned int mode;
+};
+#endif
+
#endif
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
new file mode 100644
index 0000000..30302cb
--- /dev/null
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -0,0 +1,13 @@
+#include <linux/stddef.h>
+#include <linux/kbuild.h>
+#include "pm.h"
+
+int main(void)
+{
+ DEFINE(PM_DATA_PMC, offsetof(struct at91_pm_data, pmc));
+ DEFINE(PM_DATA_RAMC0, offsetof(struct at91_pm_data, ramc[0]));
+ DEFINE(PM_DATA_RAMC1, offsetof(struct at91_pm_data, ramc[1]));
+ DEFINE(PM_DATA_MEMCTRL, offsetof(struct at91_pm_data, memctrl));
+ DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
+ return 0;
+}
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index a25defd..96781da 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -4,7 +4,7 @@
* Copyright (C) 2006 Savin Zlobec
*
* AT91SAM9 support:
- * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -14,6 +14,7 @@
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include "pm.h"
+#include "generated/at91_pm_data-offsets.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
@@ -72,13 +73,9 @@
.arm
/*
- * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
- * void __iomem *ramc1, int memctrl)
+ * void at91_suspend_sram_fn(struct at91_pm_data*)
* @input param:
- * @r0: base address of AT91_PMC
- * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
- * @r2: base address of second SDRAM Controller or 0 if not present
- * @r3: pm information
+ * @r0: base address of struct at91_pm_data
*/
/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
.align 3
@@ -90,16 +87,16 @@
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
- str r0, .pmc_base
- str r1, .sramc_base
- str r2, .sramc1_base
-
- and r0, r3, #AT91_PM_MEMTYPE_MASK
- str r0, .memtype
-
- lsr r0, r3, #AT91_PM_MODE_OFFSET
- and r0, r0, #AT91_PM_MODE_MASK
- str r0, .pm_mode
+ ldr tmp1, [r0, #PM_DATA_PMC]
+ str tmp1, .pmc_base
+ ldr tmp1, [r0, #PM_DATA_RAMC0]
+ str tmp1, .sramc_base
+ ldr tmp1, [r0, #PM_DATA_RAMC1]
+ str tmp1, .sramc1_base
+ ldr tmp1, [r0, #PM_DATA_MEMCTRL]
+ str tmp1, .memtype
+ ldr tmp1, [r0, #PM_DATA_MODE]
+ str tmp1, .pm_mode
/* Active the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_ACTIVE
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index b272c45..6d157d0 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -15,60 +15,10 @@
#include <asm/system_misc.h>
#include "generic.h"
-#include "soc.h"
-
-static const struct at91_soc sama5_socs[] = {
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
- "sama5d21", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
- "sama5d22", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
- "sama5d23", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
- "sama5d24", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
- "sama5d24", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
- "sama5d26", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
- "sama5d27", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
- "sama5d27", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
- "sama5d28", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
- "sama5d28", "sama5d2"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
- "sama5d31", "sama5d3"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
- "sama5d33", "sama5d3"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
- "sama5d34", "sama5d3"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
- "sama5d35", "sama5d3"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
- "sama5d36", "sama5d3"),
- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
- "sama5d41", "sama5d4"),
- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
- "sama5d42", "sama5d4"),
- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
- "sama5d43", "sama5d4"),
- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
- "sama5d44", "sama5d4"),
- { /* sentinel */ },
-};
static void __init sama5_dt_device_init(void)
{
- struct soc_device *soc;
- struct device *soc_dev = NULL;
-
- soc = at91_soc_init(sama5_socs);
- if (soc != NULL)
- soc_dev = soc_device_to_device(soc);
-
- of_platform_default_populate(NULL, NULL, soc_dev);
+ of_platform_default_populate(NULL, NULL, NULL);
sama5_pm_init();
}
diff --git a/arch/arm/mach-at91/soc.c b/arch/arm/mach-at91/soc.c
deleted file mode 100644
index c6fda75..0000000
--- a/arch/arm/mach-at91/soc.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright (C) 2015 Atmel
- *
- * Alexandre Belloni <alexandre.belloni@free-electrons.com
- * Boris Brezillon <boris.brezillon@free-electrons.com
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- */
-
-#define pr_fmt(fmt) "AT91: " fmt
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/slab.h>
-#include <linux/sys_soc.h>
-
-#include "soc.h"
-
-#define AT91_DBGU_CIDR 0x40
-#define AT91_DBGU_EXID 0x44
-#define AT91_CHIPID_CIDR 0x00
-#define AT91_CHIPID_EXID 0x04
-#define AT91_CIDR_VERSION(x) ((x) & 0x1f)
-#define AT91_CIDR_EXT BIT(31)
-#define AT91_CIDR_MATCH_MASK 0x7fffffe0
-
-static int __init at91_get_cidr_exid_from_dbgu(u32 *cidr, u32 *exid)
-{
- struct device_node *np;
- void __iomem *regs;
-
- np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
- if (!np)
- np = of_find_compatible_node(NULL, NULL,
- "atmel,at91sam9260-dbgu");
- if (!np)
- return -ENODEV;
-
- regs = of_iomap(np, 0);
- of_node_put(np);
-
- if (!regs) {
- pr_warn("Could not map DBGU iomem range");
- return -ENXIO;
- }
-
- *cidr = readl(regs + AT91_DBGU_CIDR);
- *exid = readl(regs + AT91_DBGU_EXID);
-
- iounmap(regs);
-
- return 0;
-}
-
-static int __init at91_get_cidr_exid_from_chipid(u32 *cidr, u32 *exid)
-{
- struct device_node *np;
- void __iomem *regs;
-
- np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid");
- if (!np)
- return -ENODEV;
-
- regs = of_iomap(np, 0);
- of_node_put(np);
-
- if (!regs) {
- pr_warn("Could not map DBGU iomem range");
- return -ENXIO;
- }
-
- *cidr = readl(regs + AT91_CHIPID_CIDR);
- *exid = readl(regs + AT91_CHIPID_EXID);
-
- iounmap(regs);
-
- return 0;
-}
-
-struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
-{
- struct soc_device_attribute *soc_dev_attr;
- const struct at91_soc *soc;
- struct soc_device *soc_dev;
- u32 cidr, exid;
- int ret;
-
- /*
- * With SAMA5D2 and later SoCs, CIDR and EXID registers are no more
- * in the dbgu device but in the chipid device whose purpose is only
- * to expose these two registers.
- */
- ret = at91_get_cidr_exid_from_dbgu(&cidr, &exid);
- if (ret)
- ret = at91_get_cidr_exid_from_chipid(&cidr, &exid);
- if (ret) {
- if (ret == -ENODEV)
- pr_warn("Could not find identification node");
- return NULL;
- }
-
- for (soc = socs; soc->name; soc++) {
- if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK))
- continue;
-
- if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid)
- break;
- }
-
- if (!soc->name) {
- pr_warn("Could not find matching SoC description\n");
- return NULL;
- }
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return NULL;
-
- soc_dev_attr->family = soc->family;
- soc_dev_attr->soc_id = soc->name;
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
- AT91_CIDR_VERSION(cidr));
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- kfree(soc_dev_attr->revision);
- kfree(soc_dev_attr);
- pr_warn("Could not register SoC device\n");
- return NULL;
- }
-
- if (soc->family)
- pr_info("Detected SoC family: %s\n", soc->family);
- pr_info("Detected SoC: %s, revision %X\n", soc->name,
- AT91_CIDR_VERSION(cidr));
-
- return soc_dev;
-}
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a0e66d8..f9389c5 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -198,7 +198,9 @@
select HAVE_ARM_ARCH_TIMER
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
+ select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
+ select ZONE_DMA if ARM_LPAE
select SOC_BRCMSTB
select SOC_BUS
help
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6f1e129..b5625d0 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -828,6 +828,9 @@ static struct regulator_consumer_supply fixed_supplies[] = {
/* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
REGULATOR_SUPPLY("DVDD", "1-0018"),
+
+ /* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */
+ REGULATOR_SUPPLY("vcc", "1-0020"),
};
/* TPS65070 voltage regulator support */
@@ -1213,6 +1216,7 @@ static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
static struct vpif_capture_config da850_vpif_capture_config = {
.subdev_info = da850_vpif_capture_sdev_info,
.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
+ .i2c_adapter_id = 1,
.chan_config[0] = {
.inputs = da850_ch0_inputs,
.input_count = ARRAY_SIZE(da850_ch0_inputs),
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 023480b..20f1874 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -744,7 +744,8 @@ static int davinci_phy_fixup(struct phy_device *phydev)
return 0;
}
-#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ IS_ENABLED(CONFIG_PATA_BK3710))
#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index f702d4f..cb17682 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -119,7 +119,8 @@ static struct platform_device davinci_nand_device = {
},
};
-#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ IS_ENABLED(CONFIG_PATA_BK3710))
#ifdef CONFIG_I2C
/* CPLD Register 0 bits to control ATA */
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 0a78388..0c02aaa 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -163,7 +163,8 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
.wires = 4,
};
-#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ IS_ENABLED(CONFIG_PATA_BK3710))
#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 073c458..bd88470 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -304,6 +304,11 @@ static struct clk usb20_clk = {
.gpsc = 1,
};
+static struct clk cppi41_clk = {
+ .name = "cppi41",
+ .parent = &usb20_clk,
+};
+
static struct clk aemif_clk = {
.name = "aemif",
.parent = &pll0_sysclk3,
@@ -413,6 +418,7 @@ static struct clk_lookup da830_clks[] = {
CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
CLK("davinci-mcasp.2", NULL, &mcasp2_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
+ CLK("cppi41-dmaengine", NULL, &cppi41_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "secu_mgr", &secu_mgr_clk),
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index ccad2f9..07d6f0e 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -401,6 +401,11 @@ static struct clk usb20_clk = {
.gpsc = 1,
};
+static struct clk cppi41_clk = {
+ .name = "cppi41",
+ .parent = &usb20_clk,
+};
+
static struct clk spi0_clk = {
.name = "spi0",
.parent = &pll0_sysclk2,
@@ -560,6 +565,7 @@ static struct clk_lookup da850_clks[] = {
CLK("davinci-nand.0", "aemif", &aemif_nand_clk),
CLK("ohci-da8xx", "usb11", &usb11_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
+ CLK("cppi41-dmaengine", NULL, &cppi41_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("vpif", NULL, &vpif_clk),
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index e3cef50..5699ce3 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -53,6 +53,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL),
OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL),
+ OF_DEV_AUXDATA("ti,da850-vpif", 0x01e17000, "vpif", NULL),
{}
};
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index 5b57da4..329f540 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -10,26 +10,202 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>
+
#include <mach/common.h>
+#include <mach/da8xx.h>
struct pdata_init {
const char *compatible;
void (*fn)(void);
};
+#define TVP5147_CH0 "tvp514x-0"
+#define TVP5147_CH1 "tvp514x-1"
+
+/* VPIF capture configuration */
+static struct tvp514x_platform_data tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1,
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static const struct vpif_input da850_ch0_inputs[] = {
+ {
+ .input = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_STD,
+ .std = TVP514X_STD_ALL,
+ },
+ .input_route = INPUT_CVBS_VI2B,
+ .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ .subdev_name = TVP5147_CH0,
+ },
+};
+
+static const struct vpif_input da850_ch1_inputs[] = {
+ {
+ .input = {
+ .index = 0,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_STD,
+ .std = TVP514X_STD_ALL,
+ },
+ .input_route = INPUT_SVIDEO_VI2C_VI1C,
+ .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ .subdev_name = TVP5147_CH1,
+ },
+};
+
+static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
+ {
+ .name = TVP5147_CH0,
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &tvp5146_pdata,
+ },
+ },
+ {
+ .name = TVP5147_CH1,
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5c),
+ .platform_data = &tvp5146_pdata,
+ },
+ },
+};
+
+static struct vpif_capture_config da850_vpif_capture_config = {
+ .subdev_info = da850_vpif_capture_sdev_info,
+ .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
+ .chan_config[0] = {
+ .inputs = da850_ch0_inputs,
+ .input_count = ARRAY_SIZE(da850_ch0_inputs),
+ .vpif_if = {
+ .if_type = VPIF_IF_BT656,
+ .hd_pol = 1,
+ .vd_pol = 1,
+ .fid_pol = 0,
+ },
+ },
+ .chan_config[1] = {
+ .inputs = da850_ch1_inputs,
+ .input_count = ARRAY_SIZE(da850_ch1_inputs),
+ .vpif_if = {
+ .if_type = VPIF_IF_BT656,
+ .hd_pol = 1,
+ .vd_pol = 1,
+ .fid_pol = 0,
+ },
+ },
+ .card_name = "DA850/OMAP-L138 Video Capture",
+};
+
+static void __init da850_vpif_legacy_register_capture(void)
+{
+ int ret;
+
+ ret = da850_register_vpif_capture(&da850_vpif_capture_config);
+ if (ret)
+ pr_warn("%s: VPIF capture setup failed: %d\n",
+ __func__, ret);
+}
+
+static void __init da850_vpif_capture_legacy_init_lcdk(void)
+{
+ da850_vpif_capture_config.subdev_count = 1;
+ da850_vpif_legacy_register_capture();
+}
+
+static void __init da850_vpif_capture_legacy_init_evm(void)
+{
+ da850_vpif_legacy_register_capture();
+}
+
+static struct adv7343_platform_data adv7343_pdata = {
+ .mode_config = {
+ .dac = { 1, 1, 1 },
+ },
+ .sd_config = {
+ .sd_dac_out = { 1 },
+ },
+};
+
+static struct vpif_subdev_info da850_vpif_subdev[] = {
+ {
+ .name = "adv7343",
+ .board_info = {
+ I2C_BOARD_INFO("adv7343", 0x2a),
+ .platform_data = &adv7343_pdata,
+ },
+ },
+};
+
+static const struct vpif_output da850_ch0_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_STD,
+ .std = V4L2_STD_ALL,
+ },
+ .subdev_name = "adv7343",
+ .output_route = ADV7343_COMPOSITE_ID,
+ },
+ {
+ .output = {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_STD,
+ .std = V4L2_STD_ALL,
+ },
+ .subdev_name = "adv7343",
+ .output_route = ADV7343_SVIDEO_ID,
+ },
+};
+
+static struct vpif_display_config da850_vpif_display_config = {
+ .subdevinfo = da850_vpif_subdev,
+ .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
+ .chan_config[0] = {
+ .outputs = da850_ch0_outputs,
+ .output_count = ARRAY_SIZE(da850_ch0_outputs),
+ },
+ .card_name = "DA850/OMAP-L138 Video Display",
+};
+
+static void __init da850_vpif_display_legacy_init_evm(void)
+{
+ int ret;
+
+ ret = da850_register_vpif_display(&da850_vpif_display_config);
+ if (ret)
+ pr_warn("%s: VPIF display setup failed: %d\n",
+ __func__, ret);
+}
+
static void pdata_quirks_check(struct pdata_init *quirks)
{
while (quirks->compatible) {
if (of_machine_is_compatible(quirks->compatible)) {
if (quirks->fn)
quirks->fn();
- break;
}
quirks++;
}
}
static struct pdata_init pdata_quirks[] __initdata = {
+ { "ti,da850-lcdk", da850_vpif_capture_legacy_init_lcdk, },
+ { "ti,da850-evm", da850_vpif_display_legacy_init_evm, },
+ { "ti,da850-evm", da850_vpif_capture_legacy_init_evm, },
{ /* sentinel */ },
};
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 0afd201..efb8035 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -108,7 +108,6 @@ static int davinci_pm_enter(suspend_state_t state)
int ret = 0;
switch (state) {
- case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
davinci_pm_suspend();
break;
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
index 6f066ee..06c8b09 100644
--- a/arch/arm/mach-gemini/Kconfig
+++ b/arch/arm/mach-gemini/Kconfig
@@ -1,40 +1,13 @@
-if ARCH_GEMINI
-
-menu "Cortina Systems Gemini Implementations"
-
-config MACH_NAS4220B
- bool "Raidsonic NAS-4220-B"
- select GEMINI_MEM_SWAP
+menuconfig ARCH_GEMINI
+ bool "Cortina Systems Gemini"
+ depends on ARCH_MULTI_V4
+ select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+ select FARADAY_FTINTC010
+ select FTTMR010_TIMER
+ select GPIO_FTGPIO010
+ select GPIOLIB
+ select POWER_RESET
+ select POWER_RESET_GEMINI_POWEROFF
+ select POWER_RESET_SYSCON
help
- Say Y here if you intend to run this kernel on a
- Raidsonic NAS-4220-B.
-
-config MACH_RUT100
- bool "Teltonika RUT100"
- select GEMINI_MEM_SWAP
- help
- Say Y here if you intend to run this kernel on a
- Teltonika 3G Router RUT100.
-
-config MACH_WBD111
- bool "Wiliboard WBD-111"
- select GEMINI_MEM_SWAP
- help
- Say Y here if you intend to run this kernel on a
- Wiliboard WBD-111.
-
-config MACH_WBD222
- bool "Wiliboard WBD-222"
- select GEMINI_MEM_SWAP
- help
- Say Y here if you intend to run this kernel on a
- Wiliboard WBD-222.
-
-endmenu
-
-config GEMINI_MEM_SWAP
- bool "Gemini memory is swapped"
- help
- Say Y here if Gemini memory is swapped by bootloader.
-
-endif
+ Support for the Cortina Systems Gemini family SoCs
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index 7963a77..ca0db54 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -1,13 +1,2 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := irq.o mm.o time.o devices.o gpio.o idle.o reset.o
-
-# Board-specific support
-obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
-obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
-obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
-obj-$(CONFIG_MACH_WBD222) += board-wbd222.o
+# Makefile for Cortina systems Gemini
+obj-y := board-dt.o
diff --git a/arch/arm/mach-gemini/Makefile.boot b/arch/arm/mach-gemini/Makefile.boot
deleted file mode 100644
index 683f52b..0000000
--- a/arch/arm/mach-gemini/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-ifeq ($(CONFIG_GEMINI_MEM_SWAP),y)
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
-else
- zreladdr-y += 0x10008000
-params_phys-y := 0x10000100
-initrd_phys-y := 0x10800000
-endif
diff --git a/arch/arm/mach-gemini/board-dt.c b/arch/arm/mach-gemini/board-dt.c
new file mode 100644
index 0000000..c0c0ebd
--- /dev/null
+++ b/arch/arm/mach-gemini/board-dt.c
@@ -0,0 +1,62 @@
+/*
+ * Gemini Device Tree boot support
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+#include <asm/proc-fns.h>
+
+#ifdef CONFIG_DEBUG_GEMINI
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc gemini_io_desc[] __initdata = {
+ {
+ .virtual = CONFIG_DEBUG_UART_VIRT,
+ .pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init gemini_map_io(void)
+{
+ iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
+}
+#else
+#define gemini_map_io NULL
+#endif
+
+static void gemini_idle(void)
+{
+ /*
+ * Because of broken hardware we have to enable interrupts or the CPU
+ * will never wakeup... Acctualy it is not very good to enable
+ * interrupts first since scheduler can miss a tick, but there is
+ * no other way around this. Platforms that needs it for power saving
+ * should enable it in init code, since by default it is
+ * disabled.
+ */
+
+ /* FIXME: Enabling interrupts here is racy! */
+ local_irq_enable();
+ cpu_do_idle();
+}
+
+static void __init gemini_init_machine(void)
+{
+ arm_pm_idle = gemini_idle;
+}
+
+static const char *gemini_board_compat[] = {
+ "cortina,gemini",
+ NULL,
+};
+
+DT_MACHINE_START(GEMINI_DT, "Gemini (Device Tree)")
+ .map_io = gemini_map_io,
+ .init_machine = gemini_init_machine,
+ .dt_compat = gemini_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
deleted file mode 100644
index 18b1279..0000000
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Support for Raidsonic NAS-4220-B
- *
- * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
- *
- * based on rut1xx.c
- * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-#include "common.h"
-
-static struct gpio_led ib4220b_leds[] = {
- {
- .name = "nas4220b:orange:hdd",
- .default_trigger = "none",
- .gpio = 60,
- },
- {
- .name = "nas4220b:green:os",
- .default_trigger = "heartbeat",
- .gpio = 62,
- },
-};
-
-static struct gpio_led_platform_data ib4220b_leds_data = {
- .num_leds = ARRAY_SIZE(ib4220b_leds),
- .leds = ib4220b_leds,
-};
-
-static struct platform_device ib4220b_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &ib4220b_leds_data,
- },
-};
-
-static struct gpio_keys_button ib4220b_keys[] = {
- {
- .code = KEY_SETUP,
- .gpio = 61,
- .active_low = 1,
- .desc = "Backup Button",
- .type = EV_KEY,
- },
- {
- .code = KEY_RESTART,
- .gpio = 63,
- .active_low = 1,
- .desc = "Softreset Button",
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data ib4220b_keys_data = {
- .buttons = ib4220b_keys,
- .nbuttons = ARRAY_SIZE(ib4220b_keys),
-};
-
-static struct platform_device ib4220b_key_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &ib4220b_keys_data,
- },
-};
-
-static void __init ib4220b_init(void)
-{
- gemini_gpio_init();
- platform_register_uart();
- platform_register_pflash(SZ_16M, NULL, 0);
- platform_device_register(&ib4220b_led_device);
- platform_device_register(&ib4220b_key_device);
- platform_register_rtc();
-}
-
-MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
- .atag_offset = 0x100,
- .map_io = gemini_map_io,
- .init_irq = gemini_init_irq,
- .init_time = gemini_timer_init,
- .init_machine = ib4220b_init,
- .restart = gemini_restart,
-MACHINE_END
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
deleted file mode 100644
index 7a675f8..0000000
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Support for Teltonika RUT1xx
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/sizes.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-
-static struct gpio_keys_button rut1xx_keys[] = {
- {
- .code = KEY_SETUP,
- .gpio = 60,
- .active_low = 1,
- .desc = "Reset to defaults",
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data rut1xx_keys_data = {
- .buttons = rut1xx_keys,
- .nbuttons = ARRAY_SIZE(rut1xx_keys),
-};
-
-static struct platform_device rut1xx_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &rut1xx_keys_data,
- },
-};
-
-static struct gpio_led rut100_leds[] = {
- {
- .name = "Power",
- .default_trigger = "heartbeat",
- .gpio = 17,
- },
- {
- .name = "GSM",
- .default_trigger = "default-on",
- .gpio = 7,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data rut100_leds_data = {
- .num_leds = ARRAY_SIZE(rut100_leds),
- .leds = rut100_leds,
-};
-
-static struct platform_device rut1xx_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rut100_leds_data,
- },
-};
-
-static void __init rut1xx_init(void)
-{
- gemini_gpio_init();
- platform_register_uart();
- platform_register_pflash(SZ_8M, NULL, 0);
- platform_device_register(&rut1xx_leds);
- platform_device_register(&rut1xx_keys_device);
- platform_register_rtc();
-}
-
-MACHINE_START(RUT100, "Teltonika RUT100")
- .atag_offset = 0x100,
- .map_io = gemini_map_io,
- .init_irq = gemini_init_irq,
- .init_time = gemini_timer_init,
- .init_machine = rut1xx_init,
- .restart = gemini_restart,
-MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
deleted file mode 100644
index 14c56f3..0000000
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Support for Wiliboard WBD-111
- *
- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/skbuff.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-
-#include "common.h"
-
-static struct gpio_keys_button wbd111_keys[] = {
- {
- .code = KEY_SETUP,
- .gpio = 5,
- .active_low = 1,
- .desc = "reset",
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data wbd111_keys_data = {
- .buttons = wbd111_keys,
- .nbuttons = ARRAY_SIZE(wbd111_keys),
-};
-
-static struct platform_device wbd111_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &wbd111_keys_data,
- },
-};
-
-static struct gpio_led wbd111_leds[] = {
- {
- .name = "L3red",
- .gpio = 1,
- },
- {
- .name = "L4green",
- .gpio = 2,
- },
- {
- .name = "L4red",
- .gpio = 3,
- },
- {
- .name = "L3green",
- .gpio = 5,
- },
-};
-
-static struct gpio_led_platform_data wbd111_leds_data = {
- .num_leds = ARRAY_SIZE(wbd111_leds),
- .leds = wbd111_leds,
-};
-
-static struct platform_device wbd111_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wbd111_leds_data,
- },
-};
-
-static struct mtd_partition wbd111_partitions[] = {
- {
- .name = "RedBoot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x100000,
- } , {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x6a0000,
- } , {
- .name = "VCTL",
- .offset = 0x7c0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "cfg",
- .offset = 0x7d0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "FIS",
- .offset = 0x7e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
-
-static void __init wbd111_init(void)
-{
- gemini_gpio_init();
- platform_register_uart();
- platform_register_pflash(SZ_8M, wbd111_partitions,
- wbd111_num_partitions);
- platform_device_register(&wbd111_leds_device);
- platform_device_register(&wbd111_keys_device);
- platform_register_rtc();
-}
-
-MACHINE_START(WBD111, "Wiliboard WBD-111")
- .atag_offset = 0x100,
- .map_io = gemini_map_io,
- .init_irq = gemini_init_irq,
- .init_time = gemini_timer_init,
- .init_machine = wbd111_init,
- .restart = gemini_restart,
-MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
deleted file mode 100644
index 6070282..0000000
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Support for Wiliboard WBD-222
- *
- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/skbuff.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-
-#include "common.h"
-
-static struct gpio_keys_button wbd222_keys[] = {
- {
- .code = KEY_SETUP,
- .gpio = 5,
- .active_low = 1,
- .desc = "reset",
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data wbd222_keys_data = {
- .buttons = wbd222_keys,
- .nbuttons = ARRAY_SIZE(wbd222_keys),
-};
-
-static struct platform_device wbd222_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &wbd222_keys_data,
- },
-};
-
-static struct gpio_led wbd222_leds[] = {
- {
- .name = "L3red",
- .gpio = 1,
- },
- {
- .name = "L4green",
- .gpio = 2,
- },
- {
- .name = "L4red",
- .gpio = 3,
- },
- {
- .name = "L3green",
- .gpio = 5,
- },
-};
-
-static struct gpio_led_platform_data wbd222_leds_data = {
- .num_leds = ARRAY_SIZE(wbd222_leds),
- .leds = wbd222_leds,
-};
-
-static struct platform_device wbd222_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wbd222_leds_data,
- },
-};
-
-static struct mtd_partition wbd222_partitions[] = {
- {
- .name = "RedBoot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x100000,
- } , {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x6a0000,
- } , {
- .name = "VCTL",
- .offset = 0x7c0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "cfg",
- .offset = 0x7d0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "FIS",
- .offset = 0x7e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
-
-static void __init wbd222_init(void)
-{
- gemini_gpio_init();
- platform_register_uart();
- platform_register_pflash(SZ_8M, wbd222_partitions,
- wbd222_num_partitions);
- platform_device_register(&wbd222_leds_device);
- platform_device_register(&wbd222_keys_device);
- platform_register_rtc();
-}
-
-MACHINE_START(WBD222, "Wiliboard WBD-222")
- .atag_offset = 0x100,
- .map_io = gemini_map_io,
- .init_irq = gemini_init_irq,
- .init_time = gemini_timer_init,
- .init_machine = wbd222_init,
- .restart = gemini_restart,
-MACHINE_END
diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h
deleted file mode 100644
index dd88369..0000000
--- a/arch/arm/mach-gemini/common.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Common Gemini architecture functions
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __GEMINI_COMMON_H__
-#define __GEMINI_COMMON_H__
-
-#include <linux/reboot.h>
-
-struct mtd_partition;
-
-extern void gemini_map_io(void);
-extern void gemini_init_irq(void);
-extern void gemini_timer_init(void);
-extern void gemini_gpio_init(void);
-extern void platform_register_rtc(void);
-
-/* Common platform devices registration functions */
-extern int platform_register_uart(void);
-extern int platform_register_pflash(unsigned int size,
- struct mtd_partition *parts,
- unsigned int nr_parts);
-
-extern void gemini_restart(enum reboot_mode mode, const char *cmd);
-
-#endif /* __GEMINI_COMMON_H__ */
diff --git a/arch/arm/mach-gemini/devices.c b/arch/arm/mach-gemini/devices.c
deleted file mode 100644
index 5cff298..0000000
--- a/arch/arm/mach-gemini/devices.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Common devices definition for Gemini
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = (void *)IO_ADDRESS(GEMINI_UART_BASE),
- .mapbase = GEMINI_UART_BASE,
- .irq = IRQ_UART,
- .uartclk = UART_CLK,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .type = PORT_16550A,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_FIXED_TYPE,
- },
- {},
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-int platform_register_uart(void)
-{
- return platform_device_register(&serial_device);
-}
-
-static struct resource flash_resource = {
- .start = GEMINI_FLASH_BASE,
- .flags = IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data pflash_platform_data = {};
-
-static struct platform_device pflash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pflash_platform_data,
- },
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
-int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
- unsigned int nr_parts)
-{
- unsigned int reg;
-
- reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_STATUS);
-
- if ((reg & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL)
- return -ENXIO;
-
- if (reg & FLASH_WIDTH_16BIT)
- pflash_platform_data.width = 2;
- else
- pflash_platform_data.width = 1;
-
- /* enable parallel flash pins and disable others */
- reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
- reg &= ~PFLASH_PADS_DISABLE;
- reg |= SFLASH_PADS_DISABLE | NAND_PADS_DISABLE;
- __raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
-
- flash_resource.end = flash_resource.start + size - 1;
-
- pflash_platform_data.parts = parts;
- pflash_platform_data.nr_parts = nr_parts;
-
- return platform_device_register(&pflash_device);
-}
-
-static struct resource gemini_rtc_resources[] = {
- [0] = {
- .start = GEMINI_RTC_BASE,
- .end = GEMINI_RTC_BASE + 0x24,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gemini_rtc_device = {
- .name = "rtc-gemini",
- .id = 0,
- .num_resources = ARRAY_SIZE(gemini_rtc_resources),
- .resource = gemini_rtc_resources,
-};
-
-int __init platform_register_rtc(void)
-{
- return platform_device_register(&gemini_rtc_device);
-}
-
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
deleted file mode 100644
index 469a76e..0000000
--- a/arch/arm/mach-gemini/gpio.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Gemini gpiochip and interrupt routines
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on plat-mxc/gpio.c:
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio/driver.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
-#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
-
-/* GPIO registers definition */
-#define GPIO_DATA_OUT 0x0
-#define GPIO_DATA_IN 0x4
-#define GPIO_DIR 0x8
-#define GPIO_DATA_SET 0x10
-#define GPIO_DATA_CLR 0x14
-#define GPIO_PULL_EN 0x18
-#define GPIO_PULL_TYPE 0x1C
-#define GPIO_INT_EN 0x20
-#define GPIO_INT_STAT 0x24
-#define GPIO_INT_MASK 0x2C
-#define GPIO_INT_CLR 0x30
-#define GPIO_INT_TYPE 0x34
-#define GPIO_INT_BOTH_EDGE 0x38
-#define GPIO_INT_LEVEL 0x3C
-#define GPIO_DEBOUNCE_EN 0x40
-#define GPIO_DEBOUNCE_PRESCALE 0x44
-
-#define GPIO_PORT_NUM 3
-
-static void _set_gpio_irqenable(void __iomem *base, unsigned int index,
- int enable)
-{
- unsigned int reg;
-
- reg = __raw_readl(base + GPIO_INT_EN);
- reg = (reg & (~(1 << index))) | (!!enable << index);
- __raw_writel(reg, base + GPIO_INT_EN);
-}
-
-static void gpio_ack_irq(struct irq_data *d)
-{
- unsigned int gpio = irq_to_gpio(d->irq);
- void __iomem *base = GPIO_BASE(gpio / 32);
-
- __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
-}
-
-static void gpio_mask_irq(struct irq_data *d)
-{
- unsigned int gpio = irq_to_gpio(d->irq);
- void __iomem *base = GPIO_BASE(gpio / 32);
-
- _set_gpio_irqenable(base, gpio % 32, 0);
-}
-
-static void gpio_unmask_irq(struct irq_data *d)
-{
- unsigned int gpio = irq_to_gpio(d->irq);
- void __iomem *base = GPIO_BASE(gpio / 32);
-
- _set_gpio_irqenable(base, gpio % 32, 1);
-}
-
-static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
-{
- unsigned int gpio = irq_to_gpio(d->irq);
- unsigned int gpio_mask = 1 << (gpio % 32);
- void __iomem *base = GPIO_BASE(gpio / 32);
- unsigned int reg_both, reg_level, reg_type;
-
- reg_type = __raw_readl(base + GPIO_INT_TYPE);
- reg_level = __raw_readl(base + GPIO_INT_LEVEL);
- reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
-
- switch (type) {
- case IRQ_TYPE_EDGE_BOTH:
- reg_type &= ~gpio_mask;
- reg_both |= gpio_mask;
- break;
- case IRQ_TYPE_EDGE_RISING:
- reg_type &= ~gpio_mask;
- reg_both &= ~gpio_mask;
- reg_level &= ~gpio_mask;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- reg_type &= ~gpio_mask;
- reg_both &= ~gpio_mask;
- reg_level |= gpio_mask;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- reg_type |= gpio_mask;
- reg_level &= ~gpio_mask;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- reg_type |= gpio_mask;
- reg_level |= gpio_mask;
- break;
- default:
- return -EINVAL;
- }
-
- __raw_writel(reg_type, base + GPIO_INT_TYPE);
- __raw_writel(reg_level, base + GPIO_INT_LEVEL);
- __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
-
- gpio_ack_irq(d);
-
- return 0;
-}
-
-static void gpio_irq_handler(struct irq_desc *desc)
-{
- unsigned int port = (unsigned int)irq_desc_get_handler_data(desc);
- unsigned int gpio_irq_no, irq_stat;
-
- irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
-
- gpio_irq_no = GPIO_IRQ_BASE + port * 32;
- for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
-
- if ((irq_stat & 1) == 0)
- continue;
-
- generic_handle_irq(gpio_irq_no);
- }
-}
-
-static struct irq_chip gpio_irq_chip = {
- .name = "GPIO",
- .irq_ack = gpio_ack_irq,
- .irq_mask = gpio_mask_irq,
- .irq_unmask = gpio_unmask_irq,
- .irq_set_type = gpio_set_irq_type,
-};
-
-static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
- int dir)
-{
- void __iomem *base = GPIO_BASE(offset / 32);
- unsigned int reg;
-
- reg = __raw_readl(base + GPIO_DIR);
- if (dir)
- reg |= 1 << (offset % 32);
- else
- reg &= ~(1 << (offset % 32));
- __raw_writel(reg, base + GPIO_DIR);
-}
-
-static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- void __iomem *base = GPIO_BASE(offset / 32);
-
- if (value)
- __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
- else
- __raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
-}
-
-static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- void __iomem *base = GPIO_BASE(offset / 32);
-
- return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
-}
-
-static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- _set_gpio_direction(chip, offset, 0);
- return 0;
-}
-
-static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- _set_gpio_direction(chip, offset, 1);
- gemini_gpio_set(chip, offset, value);
- return 0;
-}
-
-static struct gpio_chip gemini_gpio_chip = {
- .label = "Gemini",
- .direction_input = gemini_gpio_direction_input,
- .get = gemini_gpio_get,
- .direction_output = gemini_gpio_direction_output,
- .set = gemini_gpio_set,
- .base = 0,
- .ngpio = GPIO_PORT_NUM * 32,
-};
-
-void __init gemini_gpio_init(void)
-{
- int i, j;
-
- for (i = 0; i < GPIO_PORT_NUM; i++) {
- /* disable, unmask and clear all interrupts */
- __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
- __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
- __raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
-
- for (j = GPIO_IRQ_BASE + i * 32;
- j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
- irq_set_chip_and_handler(j, &gpio_irq_chip,
- handle_edge_irq);
- irq_clear_status_flags(j, IRQ_NOREQUEST);
- }
-
- irq_set_chained_handler_and_data(IRQ_GPIO(i), gpio_irq_handler,
- (void *)i);
- }
-
- BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL));
-}
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
deleted file mode 100644
index ddf8ec9..0000000
--- a/arch/arm/mach-gemini/idle.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-gemini/idle.c
- */
-
-#include <linux/init.h>
-#include <asm/system_misc.h>
-#include <asm/proc-fns.h>
-
-static void gemini_idle(void)
-{
- /*
- * Because of broken hardware we have to enable interrupts or the CPU
- * will never wakeup... Acctualy it is not very good to enable
- * interrupts first since scheduler can miss a tick, but there is
- * no other way around this. Platforms that needs it for power saving
- * should enable it in init code, since by default it is
- * disabled.
- */
-
- /* FIXME: Enabling interrupts here is racy! */
- local_irq_enable();
- cpu_do_idle();
-}
-
-static int __init gemini_idle_init(void)
-{
- arm_pm_idle = gemini_idle;
- return 0;
-}
-
-arch_initcall(gemini_idle_init);
diff --git a/arch/arm/mach-gemini/include/mach/entry-macro.S b/arch/arm/mach-gemini/include/mach/entry-macro.S
deleted file mode 100644
index f044e43..0000000
--- a/arch/arm/mach-gemini/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Low-level IRQ helper macros for Gemini platform.
- *
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-#define IRQ_STATUS 0x14
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
- ldr \irqnr, [\irqstat]
- cmp \irqnr, #0
- beq 2313f
- mov \tmp, \irqnr
- mov \irqnr, #0
-2312:
- tst \tmp, #1
- bne 2313f
- add \irqnr, \irqnr, #1
- mov \tmp, \tmp, lsr #1
- cmp \irqnr, #31
- bcc 2312b
-2313:
- .endm
diff --git a/arch/arm/mach-gemini/include/mach/global_reg.h b/arch/arm/mach-gemini/include/mach/global_reg.h
deleted file mode 100644
index de7ff7e..0000000
--- a/arch/arm/mach-gemini/include/mach/global_reg.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * This file contains the hardware definitions for Gemini.
- *
- * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_GLOBAL_REG_H
-#define __MACH_GLOBAL_REG_H
-
-/* Global Word ID Register*/
-#define GLOBAL_ID 0x00
-
-#define CHIP_ID(reg) ((reg) >> 8)
-#define CHIP_REVISION(reg) ((reg) & 0xFF)
-
-/* Global Status Register */
-#define GLOBAL_STATUS 0x04
-
-#define CPU_BIG_ENDIAN (1 << 31)
-#define PLL_OSC_30M (1 << 30) /* else 60MHz */
-
-#define OPERATION_MODE_MASK (0xF << 26)
-#define OPM_IDDQ (0xF << 26)
-#define OPM_NAND (0xE << 26)
-#define OPM_RING (0xD << 26)
-#define OPM_DIRECT_BOOT (0xC << 26)
-#define OPM_USB1_PHY_TEST (0xB << 26)
-#define OPM_USB0_PHY_TEST (0xA << 26)
-#define OPM_SATA1_PHY_TEST (0x9 << 26)
-#define OPM_SATA0_PHY_TEST (0x8 << 26)
-#define OPM_ICE_ARM (0x7 << 26)
-#define OPM_ICE_FARADAY (0x6 << 26)
-#define OPM_PLL_BYPASS (0x5 << 26)
-#define OPM_DEBUG (0x4 << 26)
-#define OPM_BURN_IN (0x3 << 26)
-#define OPM_MBIST (0x2 << 26)
-#define OPM_SCAN (0x1 << 26)
-#define OPM_REAL (0x0 << 26)
-
-#define FLASH_TYPE_MASK (0x3 << 24)
-#define FLASH_TYPE_NAND_2K (0x3 << 24)
-#define FLASH_TYPE_NAND_512 (0x2 << 24)
-#define FLASH_TYPE_PARALLEL (0x1 << 24)
-#define FLASH_TYPE_SERIAL (0x0 << 24)
-/* if parallel */
-#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */
-/* if serial */
-#define FLASH_ATMEL (1 << 23) /* else STM */
-
-#define FLASH_SIZE_MASK (0x3 << 21)
-#define NAND_256M (0x3 << 21) /* and more */
-#define NAND_128M (0x2 << 21)
-#define NAND_64M (0x1 << 21)
-#define NAND_32M (0x0 << 21)
-#define ATMEL_16M (0x3 << 21) /* and more */
-#define ATMEL_8M (0x2 << 21)
-#define ATMEL_4M_2M (0x1 << 21)
-#define ATMEL_1M (0x0 << 21) /* and less */
-#define STM_32M (1 << 22) /* and more */
-#define STM_16M (0 << 22) /* and less */
-
-#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */
-
-#define CPU_AHB_RATIO_MASK (0x3 << 18)
-#define CPU_AHB_1_1 (0x0 << 18)
-#define CPU_AHB_3_2 (0x1 << 18)
-#define CPU_AHB_24_13 (0x2 << 18)
-#define CPU_AHB_2_1 (0x3 << 18)
-
-#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130)
-#define AHB_SPEED_TO_REG(x) ((((x - 130)) / 10) << 15)
-
-/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */
-#define OVERRIDE_FLASH_TYPE_SHIFT 16
-#define OVERRIDE_FLASH_WIDTH_SHIFT 16
-#define OVERRIDE_FLASH_SIZE_SHIFT 16
-#define OVERRIDE_CPU_AHB_RATIO_SHIFT 15
-#define OVERRIDE_AHB_SPEED_SHIFT 15
-
-/* Global PLL Control Register */
-#define GLOBAL_PLL_CTRL 0x08
-
-#define PLL_BYPASS (1 << 31)
-#define PLL_POWER_DOWN (1 << 8)
-#define PLL_CONTROL_Q (0x1F << 0)
-
-/* Global Soft Reset Control Register */
-#define GLOBAL_RESET 0x0C
-
-#define RESET_GLOBAL (1 << 31)
-#define RESET_CPU1 (1 << 30)
-#define RESET_TVE (1 << 28)
-#define RESET_SATA1 (1 << 27)
-#define RESET_SATA0 (1 << 26)
-#define RESET_CIR (1 << 25)
-#define RESET_EXT_DEV (1 << 24)
-#define RESET_WD (1 << 23)
-#define RESET_GPIO2 (1 << 22)
-#define RESET_GPIO1 (1 << 21)
-#define RESET_GPIO0 (1 << 20)
-#define RESET_SSP (1 << 19)
-#define RESET_UART (1 << 18)
-#define RESET_TIMER (1 << 17)
-#define RESET_RTC (1 << 16)
-#define RESET_INT1 (1 << 15)
-#define RESET_INT0 (1 << 14)
-#define RESET_LCD (1 << 13)
-#define RESET_LPC (1 << 12)
-#define RESET_APB (1 << 11)
-#define RESET_DMA (1 << 10)
-#define RESET_USB1 (1 << 9)
-#define RESET_USB0 (1 << 8)
-#define RESET_PCI (1 << 7)
-#define RESET_GMAC1 (1 << 6)
-#define RESET_GMAC0 (1 << 5)
-#define RESET_SECURITY (1 << 4)
-#define RESET_RAID (1 << 3)
-#define RESET_IDE (1 << 2)
-#define RESET_FLASH (1 << 1)
-#define RESET_DRAM (1 << 0)
-
-/* Global IO Pad Driving Capability Control Register */
-#define GLOBAL_IO_DRIVING_CTRL 0x10
-
-#define DRIVING_CURRENT_MASK 0x3
-
-/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */
-#define GPIO1_PADS_31_28_SHIFT 28
-#define GPIO0_PADS_31_16_SHIFT 26
-#define GPIO0_PADS_15_0_SHIFT 24
-#define PCI_AND_EXT_RESET_PADS_SHIFT 22
-#define IDE_PADS_SHIFT 20
-#define GMAC1_PADS_SHIFT 18
-#define GMAC0_PADS_SHIFT 16
-/* DRAM is not in mA and poorly documented */
-#define DRAM_CLOCK_PADS_SHIFT 8
-#define DRAM_DATA_PADS_SHIFT 4
-#define DRAM_CONTROL_PADS_SHIFT 0
-
-/* Global IO Pad Slew Rate Control Register */
-#define GLOBAL_IO_SLEW_RATE_CTRL 0x14
-
-#define GPIO1_PADS_31_28_SLOW (1 << 10)
-#define GPIO0_PADS_31_16_SLOW (1 << 9)
-#define GPIO0_PADS_15_0_SLOW (1 << 8)
-#define PCI_PADS_SLOW (1 << 7)
-#define IDE_PADS_SLOW (1 << 6)
-#define GMAC1_PADS_SLOW (1 << 5)
-#define GMAC0_PADS_SLOW (1 << 4)
-#define DRAM_CLOCK_PADS_SLOW (1 << 1)
-#define DRAM_IO_PADS_SLOW (1 << 0)
-
-/*
- * General skew control defines
- * 16 steps, each step is around 0.2ns
- */
-#define SKEW_MASK 0xF
-
-/* Global IDE PAD Skew Control Register */
-#define GLOBAL_IDE_SKEW_CTRL 0x18
-
-#define IDE1_HOST_STROBE_DELAY_SHIFT 28
-#define IDE1_DEVICE_STROBE_DELAY_SHIFT 24
-#define IDE1_OUTPUT_IO_SKEW_SHIFT 20
-#define IDE1_INPUT_IO_SKEW_SHIFT 16
-#define IDE0_HOST_STROBE_DELAY_SHIFT 12
-#define IDE0_DEVICE_STROBE_DELAY_SHIFT 8
-#define IDE0_OUTPUT_IO_SKEW_SHIFT 4
-#define IDE0_INPUT_IO_SKEW_SHIFT 0
-
-/* Global GMAC Control Pad Skew Control Register */
-#define GLOBAL_GMAC_CTRL_SKEW_CTRL 0x1C
-
-#define GMAC1_TXC_SKEW_SHIFT 28
-#define GMAC1_TXEN_SKEW_SHIFT 24
-#define GMAC1_RXC_SKEW_SHIFT 20
-#define GMAC1_RXDV_SKEW_SHIFT 16
-#define GMAC0_TXC_SKEW_SHIFT 12
-#define GMAC0_TXEN_SKEW_SHIFT 8
-#define GMAC0_RXC_SKEW_SHIFT 4
-#define GMAC0_RXDV_SKEW_SHIFT 0
-
-/* Global GMAC0 Data PAD Skew Control Register */
-#define GLOBAL_GMAC0_DATA_SKEW_CTRL 0x20
-/* Global GMAC1 Data PAD Skew Control Register */
-#define GLOBAL_GMAC1_DATA_SKEW_CTRL 0x24
-
-#define GMAC_TXD_SKEW_SHIFT(x) (((x) * 4) + 16)
-#define GMAC_RXD_SKEW_SHIFT(x) ((x) * 4)
-
-/* CPU has two AHB busses. */
-
-/* Global Arbitration0 Control Register */
-#define GLOBAL_ARBITRATION0_CTRL 0x28
-
-#define BOOT_CONTROLLER_HIGH_PRIO (1 << 3)
-#define DMA_BUS1_HIGH_PRIO (1 << 2)
-#define CPU0_HIGH_PRIO (1 << 0)
-
-/* Global Arbitration1 Control Register */
-#define GLOBAL_ARBITRATION1_CTRL 0x2C
-
-#define TVE_HIGH_PRIO (1 << 9)
-#define PCI_HIGH_PRIO (1 << 8)
-#define USB1_HIGH_PRIO (1 << 7)
-#define USB0_HIGH_PRIO (1 << 6)
-#define GMAC1_HIGH_PRIO (1 << 5)
-#define GMAC0_HIGH_PRIO (1 << 4)
-#define SECURITY_HIGH_PRIO (1 << 3)
-#define RAID_HIGH_PRIO (1 << 2)
-#define IDE_HIGH_PRIO (1 << 1)
-#define DMA_BUS2_HIGH_PRIO (1 << 0)
-
-/* Common bits for both arbitration registers */
-#define BURST_LENGTH_SHIFT 16
-#define BURST_LENGTH_MASK (0x3F << 16)
-
-/* Miscellaneous Control Register */
-#define GLOBAL_MISC_CTRL 0x30
-
-#define MEMORY_SPACE_SWAP (1 << 31)
-#define USB1_PLUG_MINIB (1 << 30) /* else plug is mini-A */
-#define USB0_PLUG_MINIB (1 << 29)
-#define GMAC_GMII (1 << 28)
-#define GMAC_1_ENABLE (1 << 27)
-/* TODO: define ATA/SATA bits */
-#define USB1_VBUS_ON (1 << 23)
-#define USB0_VBUS_ON (1 << 22)
-#define APB_CLKOUT_ENABLE (1 << 21)
-#define TVC_CLKOUT_ENABLE (1 << 20)
-#define EXT_CLKIN_ENABLE (1 << 19)
-#define PCI_66MHZ (1 << 18) /* else 33 MHz */
-#define PCI_CLKOUT_ENABLE (1 << 17)
-#define LPC_CLKOUT_ENABLE (1 << 16)
-#define USB1_WAKEUP_ON (1 << 15)
-#define USB0_WAKEUP_ON (1 << 14)
-/* TODO: define PCI idle detect bits */
-#define TVC_PADS_ENABLE (1 << 9)
-#define SSP_PADS_ENABLE (1 << 8)
-#define LCD_PADS_ENABLE (1 << 7)
-#define LPC_PADS_ENABLE (1 << 6)
-#define PCI_PADS_ENABLE (1 << 5)
-#define IDE_PADS_ENABLE (1 << 4)
-#define DRAM_PADS_POWER_DOWN (1 << 3)
-#define NAND_PADS_DISABLE (1 << 2)
-#define PFLASH_PADS_DISABLE (1 << 1)
-#define SFLASH_PADS_DISABLE (1 << 0)
-
-/* Global Clock Control Register */
-#define GLOBAL_CLOCK_CTRL 0x34
-
-#define POWER_STATE_G0 (1 << 31)
-#define POWER_STATE_S1 (1 << 30) /* else it is S3/S4 state */
-#define SECURITY_APB_AHB (1 << 29)
-/* else Security APB clk will be 0.75xAHB */
-/* TODO: TVC clock divider */
-#define PCI_CLKRUN_ENABLE (1 << 16)
-#define BOOT_CLK_DISABLE (1 << 13)
-#define TVC_CLK_DISABLE (1 << 12)
-#define FLASH_CLK_DISABLE (1 << 11)
-#define DDR_CLK_DISABLE (1 << 10)
-#define PCI_CLK_DISABLE (1 << 9)
-#define IDE_CLK_DISABLE (1 << 8)
-#define USB1_CLK_DISABLE (1 << 7)
-#define USB0_CLK_DISABLE (1 << 6)
-#define SATA1_CLK_DISABLE (1 << 5)
-#define SATA0_CLK_DISABLE (1 << 4)
-#define GMAC1_CLK_DISABLE (1 << 3)
-#define GMAC0_CLK_DISABLE (1 << 2)
-#define SECURITY_CLK_DISABLE (1 << 1)
-
-/* TODO: other registers definitions if needed */
-
-#endif /* __MACH_GLOBAL_REG_H */
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
deleted file mode 100644
index f0390f1..0000000
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This file contains the hardware definitions for Gemini.
- *
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-/*
- * Memory Map definitions
- */
-#ifdef CONFIG_GEMINI_MEM_SWAP
-# define GEMINI_DRAM_BASE 0x00000000
-# define GEMINI_SRAM_BASE 0x70000000
-#else
-# define GEMINI_SRAM_BASE 0x00000000
-# define GEMINI_DRAM_BASE 0x10000000
-#endif
-#define GEMINI_FLASH_BASE 0x30000000
-#define GEMINI_GLOBAL_BASE 0x40000000
-#define GEMINI_WAQTCHDOG_BASE 0x41000000
-#define GEMINI_UART_BASE 0x42000000
-#define GEMINI_TIMER_BASE 0x43000000
-#define GEMINI_LCD_BASE 0x44000000
-#define GEMINI_RTC_BASE 0x45000000
-#define GEMINI_SATA_BASE 0x46000000
-#define GEMINI_LPC_HOST_BASE 0x47000000
-#define GEMINI_LPC_IO_BASE 0x47800000
-#define GEMINI_INTERRUPT_BASE 0x48000000
-/* TODO: Different interrupt controllers when SMP
- * #define GEMINI_INTERRUPT0_BASE 0x48000000
- * #define GEMINI_INTERRUPT1_BASE 0x49000000
- */
-#define GEMINI_SSP_CTRL_BASE 0x4A000000
-#define GEMINI_POWER_CTRL_BASE 0x4B000000
-#define GEMINI_CIR_BASE 0x4C000000
-#define GEMINI_GPIO_BASE(x) (0x4D000000 + (x) * 0x1000000)
-#define GEMINI_PCI_IO_BASE 0x50000000
-#define GEMINI_PCI_MEM_BASE 0x58000000
-#define GEMINI_TOE_BASE 0x60000000
-#define GEMINI_GMAC0_BASE 0x6000A000
-#define GEMINI_GMAC1_BASE 0x6000E000
-#define GEMINI_SECURITY_BASE 0x62000000
-#define GEMINI_IDE0_BASE 0x63000000
-#define GEMINI_IDE1_BASE 0x63400000
-#define GEMINI_RAID_BASE 0x64000000
-#define GEMINI_FLASH_CTRL_BASE 0x65000000
-#define GEMINI_DRAM_CTRL_BASE 0x66000000
-#define GEMINI_GENERAL_DMA_BASE 0x67000000
-#define GEMINI_USB0_BASE 0x68000000
-#define GEMINI_USB1_BASE 0x69000000
-#define GEMINI_BIG_ENDIAN_BASE 0x80000000
-
-
-/*
- * UART Clock when System clk is 150MHz
- */
-#define UART_CLK 48000000
-
-/*
- * macro to get at IO space when running virtually
- */
-#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
-
-#endif
diff --git a/arch/arm/mach-gemini/include/mach/irqs.h b/arch/arm/mach-gemini/include/mach/irqs.h
deleted file mode 100644
index 06bc47e..0000000
--- a/arch/arm/mach-gemini/include/mach/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_IRQS_H__
-#define __MACH_IRQS_H__
-
-#define IRQ_SERIRQ1 31
-#define IRQ_SERIRQ0 30
-#define IRQ_PCID 29
-#define IRQ_PCIC 28
-#define IRQ_PCIB 27
-#define IRQ_PWR 26
-#define IRQ_CIR 25
-#define IRQ_GPIO(x) (22 + (x))
-#define IRQ_SSP 21
-#define IRQ_LPC 20
-#define IRQ_LCD 19
-#define IRQ_UART 18
-#define IRQ_RTC 17
-#define IRQ_TIMER3 16
-#define IRQ_TIMER2 15
-#define IRQ_TIMER1 14
-#define IRQ_FLASH 12
-#define IRQ_USB1 11
-#define IRQ_USB0 10
-#define IRQ_DMA 9
-#define IRQ_PCI 8
-#define IRQ_IPSEC 7
-#define IRQ_RAID 6
-#define IRQ_IDE1 5
-#define IRQ_IDE0 4
-#define IRQ_WATCHDOG 3
-#define IRQ_GMAC1 2
-#define IRQ_GMAC0 1
-#define IRQ_IPI 0
-
-#define NORMAL_IRQ_NUM 32
-
-#define GPIO_IRQ_BASE NORMAL_IRQ_NUM
-#define GPIO_IRQ_NUM (3 * 32)
-
-#define ARCH_TIMER_IRQ IRQ_TIMER2
-
-#define NR_IRQS (NORMAL_IRQ_NUM + GPIO_IRQ_NUM)
-
-#endif /* __MACH_IRQS_H__ */
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
deleted file mode 100644
index 02e2256..0000000
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on mach-pxa/include/mach/uncompress.h:
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-
-static volatile unsigned long * const UART = (unsigned long *)GEMINI_UART_BASE;
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-static inline void putc(char c)
-{
- while (!(UART[UART_LSR] & UART_LSR_THRE))
- barrier();
- UART[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
deleted file mode 100644
index d929b3f..0000000
--- a/arch/arm/mach-gemini/irq.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Interrupt routines for Gemini
- *
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/stddef.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/cpu.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/system_misc.h>
-#include <mach/hardware.h>
-
-#define IRQ_SOURCE(base_addr) (base_addr + 0x00)
-#define IRQ_MASK(base_addr) (base_addr + 0x04)
-#define IRQ_CLEAR(base_addr) (base_addr + 0x08)
-#define IRQ_TMODE(base_addr) (base_addr + 0x0C)
-#define IRQ_TLEVEL(base_addr) (base_addr + 0x10)
-#define IRQ_STATUS(base_addr) (base_addr + 0x14)
-#define FIQ_SOURCE(base_addr) (base_addr + 0x20)
-#define FIQ_MASK(base_addr) (base_addr + 0x24)
-#define FIQ_CLEAR(base_addr) (base_addr + 0x28)
-#define FIQ_TMODE(base_addr) (base_addr + 0x2C)
-#define FIQ_LEVEL(base_addr) (base_addr + 0x30)
-#define FIQ_STATUS(base_addr) (base_addr + 0x34)
-
-static void gemini_ack_irq(struct irq_data *d)
-{
- __raw_writel(1 << d->irq, IRQ_CLEAR(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static void gemini_mask_irq(struct irq_data *d)
-{
- unsigned int mask;
-
- mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
- mask &= ~(1 << d->irq);
- __raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static void gemini_unmask_irq(struct irq_data *d)
-{
- unsigned int mask;
-
- mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
- mask |= (1 << d->irq);
- __raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static struct irq_chip gemini_irq_chip = {
- .name = "INTC",
- .irq_ack = gemini_ack_irq,
- .irq_mask = gemini_mask_irq,
- .irq_unmask = gemini_unmask_irq,
-};
-
-static struct resource irq_resource = {
- .name = "irq_handler",
- .start = GEMINI_INTERRUPT_BASE,
- .end = FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4,
-};
-
-void __init gemini_init_irq(void)
-{
- unsigned int i, mode = 0, level = 0;
-
- /*
- * Disable the idle handler by default since it is buggy
- * For more info see arch/arm/mach-gemini/idle.c
- */
- cpu_idle_poll_ctrl(true);
-
- request_resource(&iomem_resource, &irq_resource);
-
- for (i = 0; i < NR_IRQS; i++) {
- irq_set_chip(i, &gemini_irq_chip);
- if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) {
- irq_set_handler(i, handle_edge_irq);
- mode |= 1 << i;
- level |= 1 << i;
- } else {
- irq_set_handler(i, handle_level_irq);
- }
- irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-
- /* Disable all interrupts */
- __raw_writel(0, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
- __raw_writel(0, FIQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-
- /* Set interrupt mode */
- __raw_writel(mode, IRQ_TMODE(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
- __raw_writel(level, IRQ_TLEVEL(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
diff --git a/arch/arm/mach-gemini/mm.c b/arch/arm/mach-gemini/mm.c
deleted file mode 100644
index 2c2cd28..0000000
--- a/arch/arm/mach-gemini/mm.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Static mappings for Gemini
- *
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-/* Page table mapping for I/O region */
-static struct map_desc gemini_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE),
- .pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE),
- .pfn = __phys_to_pfn(GEMINI_UART_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE),
- .pfn = __phys_to_pfn(GEMINI_TIMER_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE),
- .pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
- .pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)),
- .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)),
- .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)),
- .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
- .pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
- .pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
- .pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- },
-};
-
-void __init gemini_map_io(void)
-{
- iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
-}
diff --git a/arch/arm/mach-gemini/reset.c b/arch/arm/mach-gemini/reset.c
deleted file mode 100644
index 21a6d6d..0000000
--- a/arch/arm/mach-gemini/reset.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-#include "common.h"
-
-void gemini_restart(enum reboot_mode mode, const char *cmd)
-{
- __raw_writel(RESET_GLOBAL | RESET_CPU1,
- IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
-}
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
deleted file mode 100644
index f5f18df..0000000
--- a/arch/arm/mach-gemini/time.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-#include <asm/mach/time.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/sched_clock.h>
-
-/*
- * Register definitions for the timers
- */
-
-#define TIMER1_BASE GEMINI_TIMER_BASE
-#define TIMER2_BASE (GEMINI_TIMER_BASE + 0x10)
-#define TIMER3_BASE (GEMINI_TIMER_BASE + 0x20)
-
-#define TIMER_COUNT(BASE) (IO_ADDRESS(BASE) + 0x00)
-#define TIMER_LOAD(BASE) (IO_ADDRESS(BASE) + 0x04)
-#define TIMER_MATCH1(BASE) (IO_ADDRESS(BASE) + 0x08)
-#define TIMER_MATCH2(BASE) (IO_ADDRESS(BASE) + 0x0C)
-#define TIMER_CR (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x30)
-#define TIMER_INTR_STATE (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x34)
-#define TIMER_INTR_MASK (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x38)
-
-#define TIMER_1_CR_ENABLE (1 << 0)
-#define TIMER_1_CR_CLOCK (1 << 1)
-#define TIMER_1_CR_INT (1 << 2)
-#define TIMER_2_CR_ENABLE (1 << 3)
-#define TIMER_2_CR_CLOCK (1 << 4)
-#define TIMER_2_CR_INT (1 << 5)
-#define TIMER_3_CR_ENABLE (1 << 6)
-#define TIMER_3_CR_CLOCK (1 << 7)
-#define TIMER_3_CR_INT (1 << 8)
-#define TIMER_1_CR_UPDOWN (1 << 9)
-#define TIMER_2_CR_UPDOWN (1 << 10)
-#define TIMER_3_CR_UPDOWN (1 << 11)
-#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \
- TIMER_3_CR_ENABLE | \
- TIMER_3_CR_UPDOWN)
-
-#define TIMER_1_INT_MATCH1 (1 << 0)
-#define TIMER_1_INT_MATCH2 (1 << 1)
-#define TIMER_1_INT_OVERFLOW (1 << 2)
-#define TIMER_2_INT_MATCH1 (1 << 3)
-#define TIMER_2_INT_MATCH2 (1 << 4)
-#define TIMER_2_INT_OVERFLOW (1 << 5)
-#define TIMER_3_INT_MATCH1 (1 << 6)
-#define TIMER_3_INT_MATCH2 (1 << 7)
-#define TIMER_3_INT_OVERFLOW (1 << 8)
-#define TIMER_INT_ALL_MASK 0x1ff
-
-
-static unsigned int tick_rate;
-
-static u64 notrace gemini_read_sched_clock(void)
-{
- return readl(TIMER_COUNT(TIMER3_BASE));
-}
-
-static int gemini_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- u32 cr;
-
- /* Setup the match register */
- cr = readl(TIMER_COUNT(TIMER1_BASE));
- writel(cr + cycles, TIMER_MATCH1(TIMER1_BASE));
- if (readl(TIMER_COUNT(TIMER1_BASE)) - cr > cycles)
- return -ETIME;
-
- return 0;
-}
-
-static int gemini_timer_shutdown(struct clock_event_device *evt)
-{
- u32 cr;
-
- /*
- * Disable also for oneshot: the set_next() call will arm the timer
- * instead.
- */
- /* Stop timer and interrupt. */
- cr = readl(TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
- writel(cr, TIMER_CR);
-
- /* Setup counter start from 0 */
- writel(0, TIMER_COUNT(TIMER1_BASE));
- writel(0, TIMER_LOAD(TIMER1_BASE));
-
- /* enable interrupt */
- cr = readl(TIMER_INTR_MASK);
- cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
- cr |= TIMER_1_INT_MATCH1;
- writel(cr, TIMER_INTR_MASK);
-
- /* start the timer */
- cr = readl(TIMER_CR);
- cr |= TIMER_1_CR_ENABLE;
- writel(cr, TIMER_CR);
-
- return 0;
-}
-
-static int gemini_timer_set_periodic(struct clock_event_device *evt)
-{
- u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
- u32 cr;
-
- /* Stop timer and interrupt */
- cr = readl(TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
- writel(cr, TIMER_CR);
-
- /* Setup timer to fire at 1/HT intervals. */
- cr = 0xffffffff - (period - 1);
- writel(cr, TIMER_COUNT(TIMER1_BASE));
- writel(cr, TIMER_LOAD(TIMER1_BASE));
-
- /* enable interrupt on overflow */
- cr = readl(TIMER_INTR_MASK);
- cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
- cr |= TIMER_1_INT_OVERFLOW;
- writel(cr, TIMER_INTR_MASK);
-
- /* Start the timer */
- cr = readl(TIMER_CR);
- cr |= TIMER_1_CR_ENABLE;
- cr |= TIMER_1_CR_INT;
- writel(cr, TIMER_CR);
-
- return 0;
-}
-
-/* Use TIMER1 as clock event */
-static struct clock_event_device gemini_clockevent = {
- .name = "TIMER1",
- /* Reasonably fast and accurate clock event */
- .rating = 300,
- .shift = 32,
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = gemini_timer_set_next_event,
- .set_state_shutdown = gemini_timer_shutdown,
- .set_state_periodic = gemini_timer_set_periodic,
- .set_state_oneshot = gemini_timer_shutdown,
- .tick_resume = gemini_timer_shutdown,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &gemini_clockevent;
-
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static struct irqaction gemini_timer_irq = {
- .name = "Gemini Timer Tick",
- .flags = IRQF_TIMER,
- .handler = gemini_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init gemini_timer_init(void)
-{
- u32 reg_v;
-
- reg_v = readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
- tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
-
- printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
-
- tick_rate /= 6; /* APB bus run AHB*(1/6) */
-
- switch(reg_v & CPU_AHB_RATIO_MASK) {
- case CPU_AHB_1_1:
- printk(KERN_CONT "(1/1)\n");
- break;
- case CPU_AHB_3_2:
- printk(KERN_CONT "(3/2)\n");
- break;
- case CPU_AHB_24_13:
- printk(KERN_CONT "(24/13)\n");
- break;
- case CPU_AHB_2_1:
- printk(KERN_CONT "(2/1)\n");
- break;
- }
-
- /*
- * Reset the interrupt mask and status
- */
- writel(TIMER_INT_ALL_MASK, TIMER_INTR_MASK);
- writel(0, TIMER_INTR_STATE);
- writel(TIMER_DEFAULT_FLAGS, TIMER_CR);
-
- /*
- * Setup free-running clocksource timer (interrupts
- * disabled.)
- */
- writel(0, TIMER_COUNT(TIMER3_BASE));
- writel(0, TIMER_LOAD(TIMER3_BASE));
- writel(0, TIMER_MATCH1(TIMER3_BASE));
- writel(0, TIMER_MATCH2(TIMER3_BASE));
- clocksource_mmio_init(TIMER_COUNT(TIMER3_BASE),
- "gemini_clocksource", tick_rate,
- 300, 32, clocksource_mmio_readl_up);
- sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
-
- /*
- * Setup clockevent timer (interrupt-driven.)
- */
- writel(0, TIMER_COUNT(TIMER1_BASE));
- writel(0, TIMER_LOAD(TIMER1_BASE));
- writel(0, TIMER_MATCH1(TIMER1_BASE));
- writel(0, TIMER_MATCH2(TIMER1_BASE));
- setup_irq(IRQ_TIMER1, &gemini_timer_irq);
- gemini_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&gemini_clockevent, tick_rate,
- 1, 0xffffffff);
-
-}
diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c
index a6c1176..f66815c 100644
--- a/arch/arm/mach-hisi/platmcpm.c
+++ b/arch/arm/mach-hisi/platmcpm.c
@@ -279,6 +279,8 @@ static int __init hip04_smp_init(void)
&hip04_boot_method[0], 4);
if (ret)
goto err;
+
+ ret = -ENODEV;
np_sctl = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
if (!np_sctl)
goto err;
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 1dc2a34..93f584b 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -10,26 +10,17 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-#include <linux/pm_domain.h>
-#include <linux/regulator/consumer.h>
#include <linux/irqchip/arm-gic.h>
#include "common.h"
#include "hardware.h"
-#define GPC_CNTR 0x000
#define GPC_IMR1 0x008
-#define GPC_PGC_GPU_PDN 0x260
-#define GPC_PGC_GPU_PUPSCR 0x264
-#define GPC_PGC_GPU_PDNSCR 0x268
#define GPC_PGC_CPU_PDN 0x2a0
#define GPC_PGC_CPU_PUPSCR 0x2a4
#define GPC_PGC_CPU_PDNSCR 0x2a8
@@ -39,18 +30,6 @@
#define IMR_NUM 4
#define GPC_MAX_IRQS (IMR_NUM * 32)
-#define GPU_VPU_PUP_REQ BIT(1)
-#define GPU_VPU_PDN_REQ BIT(0)
-
-#define GPC_CLK_MAX 6
-
-struct pu_domain {
- struct generic_pm_domain base;
- struct regulator *reg;
- struct clk *clk[GPC_CLK_MAX];
- int num_clks;
-};
-
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
@@ -296,199 +275,3 @@ void __init imx_gpc_check_dt(void)
gpc_base = of_iomap(np, 0);
}
}
-
-static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
-{
- int iso, iso2sw;
- u32 val;
-
- /* Read ISO and ISO2SW power down delays */
- val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR);
- iso = val & 0x3f;
- iso2sw = (val >> 8) & 0x3f;
-
- /* Gate off PU domain when GPU/VPU when powered down */
- writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
-
- /* Request GPC to power down GPU/VPU */
- val = readl_relaxed(gpc_base + GPC_CNTR);
- val |= GPU_VPU_PDN_REQ;
- writel_relaxed(val, gpc_base + GPC_CNTR);
-
- /* Wait ISO + ISO2SW IPG clock cycles */
- ndelay((iso + iso2sw) * 1000 / 66);
-}
-
-static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
-{
- struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
-
- _imx6q_pm_pu_power_off(genpd);
-
- if (pu->reg)
- regulator_disable(pu->reg);
-
- return 0;
-}
-
-static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd)
-{
- struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
- int i, ret, sw, sw2iso;
- u32 val;
-
- if (pu->reg)
- ret = regulator_enable(pu->reg);
- if (pu->reg && ret) {
- pr_err("%s: failed to enable regulator: %d\n", __func__, ret);
- return ret;
- }
-
- /* Enable reset clocks for all devices in the PU domain */
- for (i = 0; i < pu->num_clks; i++)
- clk_prepare_enable(pu->clk[i]);
-
- /* Gate off PU domain when GPU/VPU when powered down */
- writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
-
- /* Read ISO and ISO2SW power down delays */
- val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR);
- sw = val & 0x3f;
- sw2iso = (val >> 8) & 0x3f;
-
- /* Request GPC to power up GPU/VPU */
- val = readl_relaxed(gpc_base + GPC_CNTR);
- val |= GPU_VPU_PUP_REQ;
- writel_relaxed(val, gpc_base + GPC_CNTR);
-
- /* Wait ISO + ISO2SW IPG clock cycles */
- ndelay((sw + sw2iso) * 1000 / 66);
-
- /* Disable reset clocks for all devices in the PU domain */
- for (i = 0; i < pu->num_clks; i++)
- clk_disable_unprepare(pu->clk[i]);
-
- return 0;
-}
-
-static struct generic_pm_domain imx6q_arm_domain = {
- .name = "ARM",
-};
-
-static struct pu_domain imx6q_pu_domain = {
- .base = {
- .name = "PU",
- .power_off = imx6q_pm_pu_power_off,
- .power_on = imx6q_pm_pu_power_on,
- },
-};
-
-static struct generic_pm_domain imx6sl_display_domain = {
- .name = "DISPLAY",
-};
-
-static struct generic_pm_domain *imx_gpc_domains[] = {
- &imx6q_arm_domain,
- &imx6q_pu_domain.base,
- &imx6sl_display_domain,
-};
-
-static struct genpd_onecell_data imx_gpc_onecell_data = {
- .domains = imx_gpc_domains,
- .num_domains = ARRAY_SIZE(imx_gpc_domains),
-};
-
-static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
-{
- struct clk *clk;
- int i, ret;
-
- imx6q_pu_domain.reg = pu_reg;
-
- for (i = 0; ; i++) {
- clk = of_clk_get(dev->of_node, i);
- if (IS_ERR(clk))
- break;
- if (i >= GPC_CLK_MAX) {
- dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
- goto clk_err;
- }
- imx6q_pu_domain.clk[i] = clk;
- }
- imx6q_pu_domain.num_clks = i;
-
- /* Enable power always in case bootloader disabled it. */
- imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
-
- if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
- return 0;
-
- imx6q_pu_domain.base.states = devm_kzalloc(dev,
- sizeof(*imx6q_pu_domain.base.states),
- GFP_KERNEL);
- if (!imx6q_pu_domain.base.states)
- return -ENOMEM;
-
- imx6q_pu_domain.base.states[0].power_off_latency_ns = 25000;
- imx6q_pu_domain.base.states[0].power_on_latency_ns = 2000000;
- imx6q_pu_domain.base.state_count = 1;
-
- for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++)
- pm_genpd_init(imx_gpc_domains[i], NULL, false);
-
- ret = of_genpd_add_provider_onecell(dev->of_node,
- &imx_gpc_onecell_data);
- if (ret)
- goto power_off;
-
- return 0;
-
-power_off:
- imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
-clk_err:
- while (i--)
- clk_put(imx6q_pu_domain.clk[i]);
- imx6q_pu_domain.reg = NULL;
- return -EINVAL;
-}
-
-static int imx_gpc_probe(struct platform_device *pdev)
-{
- struct regulator *pu_reg;
- int ret;
-
- /* bail out if DT too old and doesn't provide the necessary info */
- if (!of_property_read_bool(pdev->dev.of_node, "#power-domain-cells"))
- return 0;
-
- pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
- if (PTR_ERR(pu_reg) == -ENODEV)
- pu_reg = NULL;
- if (IS_ERR(pu_reg)) {
- ret = PTR_ERR(pu_reg);
- dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
- return ret;
- }
-
- return imx_gpc_genpd_init(&pdev->dev, pu_reg);
-}
-
-static const struct of_device_id imx_gpc_dt_ids[] = {
- { .compatible = "fsl,imx6q-gpc" },
- { .compatible = "fsl,imx6sl-gpc" },
- { }
-};
-
-static struct platform_driver imx_gpc_driver = {
- .driver = {
- .name = "imx-gpc",
- .of_match_table = imx_gpc_dt_ids,
- },
- .probe = imx_gpc_probe,
-};
-
-static int __init imx_pgc_init(void)
-{
- return platform_driver_register(&imx_gpc_driver);
-}
-subsys_initcall(imx_pgc_init);
diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c
index 32dcb5e..353b86e 100644
--- a/arch/arm/mach-imx/mach-imx25.c
+++ b/arch/arm/mach-imx/mach-imx25.c
@@ -23,6 +23,11 @@ static void __init imx25_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX25);
}
+static void __init imx25_dt_init(void)
+{
+ imx_aips_allow_unprivileged_access("fsl,imx25-aips");
+}
+
static void __init mx25_init_irq(void)
{
struct device_node *np;
@@ -41,6 +46,7 @@ static const char * const imx25_dt_board_compat[] __initconst = {
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.init_early = imx25_init_early,
+ .init_machine = imx25_dt_init,
.init_late = imx25_pm_init,
.init_irq = mx25_init_irq,
.dt_compat = imx25_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 558e5f8..68c3f07 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -375,6 +375,8 @@ static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
/* SPI */
static int spi0_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
@@ -385,6 +387,7 @@ static const struct spi_imx_master spi0_pdata __initconst = {
static int spi1_internal_chipselect[] = {
MXC_SPI_CS(0),
+ MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
@@ -398,7 +401,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
- .chip_select = 1, /* SS2 */
+ .chip_select = 2, /* SS2 */
.platform_data = &mc13783_pdata,
/* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
@@ -406,7 +409,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
.modalias = "l4f00242t03",
.max_speed_hz = 5000000,
.bus_num = 0,
- .chip_select = 0, /* SS2 */
+ .chip_select = 2, /* SS2 */
.platform_data = &mx31_3ds_l4f00242t03_pdata,
},
};
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index cc86768..bde9a9a 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -296,14 +296,14 @@ static struct spi_board_info moboard_spi_board_info[] __initdata = {
/* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 1,
- .chip_select = 0,
+ .chip_select = 1,
.platform_data = &moboard_pmic,
.mode = SPI_CS_HIGH,
},
};
static int moboard_spi2_cs[] = {
- MXC_SPI_CS(1),
+ MXC_SPI_CS(0), MXC_SPI_CS(1),
};
static const struct spi_imx_master moboard_spi2_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
index 8fd8255..95bd977 100644
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -50,13 +50,13 @@ static struct spi_board_info pcm037_spi_dev[] = {
.modalias = "dac124s085",
.max_speed_hz = 400000,
.bus_num = 0,
- .chip_select = 0, /* Index in pcm037_spi1_cs[] */
+ .chip_select = 1, /* Index in pcm037_spi1_cs[] */
.mode = SPI_CPHA,
},
};
/* Platform Data for MXC CSPI */
-static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+static int pcm037_spi1_cs[] = { MXC_SPI_CS(0), MXC_SPI_CS(1), };
static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
.chipselect = pcm037_spi1_cs,
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index c03bf28..7826289 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -1,4 +1,5 @@
/*
+ * Copyright 2017 NXP
* Copyright 2011,2016 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
@@ -47,6 +48,7 @@
#define PROFILE_SEL 0x10
#define MMDC_MADPCR0 0x410
+#define MMDC_MADPCR1 0x414
#define MMDC_MADPSR0 0x418
#define MMDC_MADPSR1 0x41C
#define MMDC_MADPSR2 0x420
@@ -57,6 +59,7 @@
#define MMDC_NUM_COUNTERS 6
#define MMDC_FLAG_PROFILE_SEL 0x1
+#define MMDC_PRF_AXI_ID_CLEAR 0x0
#define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu)
@@ -87,7 +90,7 @@ static DEFINE_IDA(mmdc_ida);
PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00")
PMU_EVENT_ATTR_STRING(busy-cycles, mmdc_pmu_busy_cycles, "event=0x01")
PMU_EVENT_ATTR_STRING(read-accesses, mmdc_pmu_read_accesses, "event=0x02")
-PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "config=0x03")
+PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "event=0x03")
PMU_EVENT_ATTR_STRING(read-bytes, mmdc_pmu_read_bytes, "event=0x04")
PMU_EVENT_ATTR_STRING(read-bytes.unit, mmdc_pmu_read_bytes_unit, "MB");
PMU_EVENT_ATTR_STRING(read-bytes.scale, mmdc_pmu_read_bytes_scale, "0.000001");
@@ -161,8 +164,11 @@ static struct attribute_group mmdc_pmu_events_attr_group = {
};
PMU_FORMAT_ATTR(event, "config:0-63");
+PMU_FORMAT_ATTR(axi_id, "config1:0-63");
+
static struct attribute *mmdc_pmu_format_attrs[] = {
&format_attr_event.attr,
+ &format_attr_axi_id.attr,
NULL,
};
@@ -345,6 +351,14 @@ static void mmdc_pmu_event_start(struct perf_event *event, int flags)
writel(DBG_RST, reg);
+ /*
+ * Write the AXI id parameter to MADPCR1.
+ */
+ val = event->attr.config1;
+ reg = mmdc_base + MMDC_MADPCR1;
+ writel(val, reg);
+
+ reg = mmdc_base + MMDC_MADPCR0;
val = DBG_EN;
if (pmu_mmdc->devtype_data->flags & MMDC_FLAG_PROFILE_SEL)
val |= PROFILE_SEL;
@@ -382,6 +396,10 @@ static void mmdc_pmu_event_stop(struct perf_event *event, int flags)
reg = mmdc_base + MMDC_MADPCR0;
writel(PRF_FRZ, reg);
+
+ reg = mmdc_base + MMDC_MADPCR1;
+ writel(MMDC_PRF_AXI_ID_CLEAR, reg);
+
mmdc_pmu_event_update(event);
}
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 4977296..bcf3df5 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -43,14 +43,14 @@
int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
/*
- * Base address for PCI regsiter region
+ * Base address for PCI register region
*/
unsigned long ixp4xx_pci_reg_base = 0;
/*
* PCI cfg an I/O routines are done by programming a
* command/byte enable register, and then read/writing
- * the data from a data regsiter. We need to ensure
+ * the data from a data register. We need to ensure
* these transactions are atomic or we will end up
* with corrupt data on the bus or in a driver.
*/
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 5543570..db12235 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -10,6 +10,7 @@
select ARCH_SUPPORTS_BIG_ENDIAN
select ZONE_DMA if ARM_LPAE
select PINCTRL
+ select PM_GENERIC_DOMAINS if PM
help
Support for boards based on the Texas Instruments Keystone family of
SoCs.
diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
index 8cbb357..fe57e26 100644
--- a/arch/arm/mach-keystone/pm_domain.c
+++ b/arch/arm/mach-keystone/pm_domain.c
@@ -32,7 +32,9 @@ static struct pm_clk_notifier_block platform_domain_notifier = {
};
static const struct of_device_id of_keystone_table[] = {
- {.compatible = "ti,keystone"},
+ {.compatible = "ti,k2hk"},
+ {.compatible = "ti,k2e"},
+ {.compatible = "ti,k2l"},
{ /* end of list */ },
};
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index ac6633d..28fe64c 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -67,6 +67,9 @@ void clk_disable(struct clk *clk)
{
unsigned long flags;
+ if (!clk)
+ return;
+
WARN_ON(clk->enabled == 0);
spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index e4f2108..1c6062d 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -419,7 +419,8 @@ static void __init mxs_machine_init(void)
crystalfontz_init();
else if (of_machine_is_compatible("eukrea,mbmx283lc"))
eukrea_mbmx283lc_init();
- else if (of_machine_is_compatible("i2se,duckbill"))
+ else if (of_machine_is_compatible("i2se,duckbill") ||
+ of_machine_is_compatible("i2se,duckbill-2"))
duckbill_init();
else if (of_machine_is_compatible("msr,m28cu3"))
m28cu3_init();
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index ee5460b..f1135bf 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -581,7 +581,6 @@ static int omap_pm_enter(suspend_state_t state)
{
switch (state)
{
- case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
omap1_pm_suspend();
break;
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 6b6fda6..91272db 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -117,7 +117,7 @@ static struct musb_hdrc_platform_data tusb_data = {
static void __init n8x0_usb_init(void)
{
int ret = 0;
- static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
+ static const char announce[] __initconst = KERN_INFO "TUSB 6010\n";
/* PM companion chip power control pin */
ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW,
diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 6c67965..67ebff8 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -524,7 +524,7 @@ static struct clockdomain pcie_7xx_clkdm = {
.dep_bit = DRA7XX_PCIE_STATDEP_SHIFT,
.wkdep_srcs = pcie_wkup_sleep_deps,
.sleepdep_srcs = pcie_wkup_sleep_deps,
- .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .flags = CLKDM_CAN_SWSUP,
};
static struct clockdomain atl_7xx_clkdm = {
diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c
index 3b5fb05..65fbd13 100644
--- a/arch/arm/mach-omap2/clockdomains81xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains81xx_data.c
@@ -91,6 +91,14 @@ static struct clockdomain default_l3_slow_81xx_clkdm = {
.flags = CLKDM_CAN_SWSUP,
};
+static struct clockdomain default_sata_81xx_clkdm = {
+ .name = "default_clkdm",
+ .pwrdm = { .name = "default_pwrdm" },
+ .cm_inst = TI81XX_CM_DEFAULT_MOD,
+ .clkdm_offs = TI816X_CM_DEFAULT_SATA_CLKDM,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
/* 816x only */
static struct clockdomain alwon_mpu_816x_clkdm = {
@@ -173,6 +181,7 @@ static struct clockdomain *clockdomains_ti814x[] __initdata = {
&mmu_81xx_clkdm,
&mmu_cfg_81xx_clkdm,
&default_l3_slow_81xx_clkdm,
+ &default_sata_81xx_clkdm,
NULL,
};
@@ -200,6 +209,7 @@ static struct clockdomain *clockdomains_ti816x[] __initdata = {
&default_ducati_816x_clkdm,
&default_pci_816x_clkdm,
&default_l3_slow_81xx_clkdm,
+ &default_sata_81xx_clkdm,
NULL,
};
diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h
index 3a0ccf0..5d73a10 100644
--- a/arch/arm/mach-omap2/cm81xx.h
+++ b/arch/arm/mach-omap2/cm81xx.h
@@ -57,5 +57,6 @@
#define TI816X_CM_DEFAULT_PCI_CLKDM 0x0010
#define TI816X_CM_DEFAULT_L3_SLOW_CLKDM 0x0014
#define TI816X_CM_DEFAULT_DUCATI_CLKDM 0x0018
+#define TI816X_CM_DEFAULT_SATA_CLKDM 0x0060
#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 3fdb945..4739512 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -121,7 +121,7 @@ static inline void omap_init_mcspi(void) {}
*
* Bind the RNG hwmod to the RNG omap_device. No return value.
*/
-static void omap_init_rng(void)
+static void __init omap_init_rng(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 0da4f2e..8bcea0d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -138,7 +138,6 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
-#include <linux/bootmem.h>
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -216,49 +215,12 @@ static LIST_HEAD(omap_hwmod_list);
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;
-/*
- * linkspace: ptr to a buffer that struct omap_hwmod_link records are
- * allocated from - used to reduce the number of small memory
- * allocations, which has a significant impact on performance
- */
-static struct omap_hwmod_link *linkspace;
-
-/*
- * free_ls, max_ls: array indexes into linkspace; representing the
- * next free struct omap_hwmod_link index, and the maximum number of
- * struct omap_hwmod_link records allocated (respectively)
- */
-static unsigned short free_ls, max_ls, ls_supp;
-
/* inited: set to true once the hwmod code is initialized */
static bool inited;
/* Private functions */
/**
- * _fetch_next_ocp_if - return the next OCP interface in a list
- * @p: ptr to a ptr to the list_head inside the ocp_if to return
- * @i: pointer to the index of the element pointed to by @p in the list
- *
- * Return a pointer to the struct omap_hwmod_ocp_if record
- * containing the struct list_head pointed to by @p, and increment
- * @p such that a future call to this routine will return the next
- * record.
- */
-static struct omap_hwmod_ocp_if *_fetch_next_ocp_if(struct list_head **p,
- int *i)
-{
- struct omap_hwmod_ocp_if *oi;
-
- oi = list_entry(*p, struct omap_hwmod_link, node)->ocp_if;
- *p = (*p)->next;
-
- *i = *i + 1;
-
- return oi;
-}
-
-/**
* _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
* @oh: struct omap_hwmod *
*
@@ -794,15 +756,10 @@ static int _init_main_clk(struct omap_hwmod *oh)
static int _init_interface_clks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
struct clk *c;
- int i = 0;
int ret = 0;
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->clk)
continue;
@@ -905,19 +862,13 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
static int _enable_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
- int i = 0;
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
if (oh->_clk)
clk_enable(oh->_clk);
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
-
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
clk_enable(os->_clk);
}
@@ -939,19 +890,13 @@ static int _enable_clocks(struct omap_hwmod *oh)
static int _disable_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
- int i = 0;
pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
if (oh->_clk)
clk_disable(oh->_clk);
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
-
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
clk_disable(os->_clk);
}
@@ -1190,16 +1135,11 @@ static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name,
static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
u32 *pa_start, u32 *pa_end)
{
- int i, j;
+ int j;
struct omap_hwmod_ocp_if *os;
- struct list_head *p = NULL;
bool found = false;
- p = oh->slave_ports.next;
-
- i = 0;
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->addr)
return -ENOENT;
@@ -1239,18 +1179,13 @@ static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
static void __init _save_mpu_port_index(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os = NULL;
- struct list_head *p;
- int i = 0;
if (!oh)
return;
oh->_int_flags |= _HWMOD_NO_MPU_PORT;
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (os->user & OCP_USER_MPU) {
oh->_mpu_port = os;
oh->_int_flags &= ~_HWMOD_NO_MPU_PORT;
@@ -1393,7 +1328,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
*/
if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
(sf & SYSC_HAS_CLOCKACTIVITY))
- _set_clockactivity(oh, oh->class->sysc->clockact, &v);
+ _set_clockactivity(oh, CLOCKACT_TEST_ICLK, &v);
_write_sysconfig(v, oh);
@@ -2092,7 +2027,7 @@ static int _enable(struct omap_hwmod *oh)
r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
-EINVAL;
- if (oh->clkdm)
+ if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
clkdm_allow_idle(oh->clkdm);
if (!r) {
@@ -2149,7 +2084,12 @@ static int _idle(struct omap_hwmod *oh)
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
- if (oh->clkdm)
+ /*
+ * If HWMOD_CLKDM_NOAUTO is set then we don't
+ * deny idle the clkdm again since idle was already denied
+ * in _enable()
+ */
+ if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
clkdm_deny_idle(oh->clkdm);
if (oh->flags & HWMOD_BLOCK_WFI)
@@ -2451,15 +2391,11 @@ static int __init _init(struct omap_hwmod *oh, void *data)
static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
- int i = 0;
+
if (oh->_state != _HWMOD_STATE_INITIALIZED)
return;
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->_clk)
continue;
@@ -2657,7 +2593,6 @@ static int __init _register(struct omap_hwmod *oh)
list_add_tail(&oh->node, &omap_hwmod_list);
- INIT_LIST_HEAD(&oh->master_ports);
INIT_LIST_HEAD(&oh->slave_ports);
spin_lock_init(&oh->_lock);
lockdep_set_class(&oh->_lock, &oh->hwmod_key);
@@ -2675,49 +2610,10 @@ static int __init _register(struct omap_hwmod *oh)
}
/**
- * _alloc_links - return allocated memory for hwmod links
- * @ml: pointer to a struct omap_hwmod_link * for the master link
- * @sl: pointer to a struct omap_hwmod_link * for the slave link
- *
- * Return pointers to two struct omap_hwmod_link records, via the
- * addresses pointed to by @ml and @sl. Will first attempt to return
- * memory allocated as part of a large initial block, but if that has
- * been exhausted, will allocate memory itself. Since ideally this
- * second allocation path will never occur, the number of these
- * 'supplemental' allocations will be logged when debugging is
- * enabled. Returns 0.
- */
-static int __init _alloc_links(struct omap_hwmod_link **ml,
- struct omap_hwmod_link **sl)
-{
- unsigned int sz;
-
- if ((free_ls + LINKS_PER_OCP_IF) <= max_ls) {
- *ml = &linkspace[free_ls++];
- *sl = &linkspace[free_ls++];
- return 0;
- }
-
- sz = sizeof(struct omap_hwmod_link) * LINKS_PER_OCP_IF;
-
- *sl = NULL;
- *ml = memblock_virt_alloc(sz, 0);
-
- *sl = (void *)(*ml) + sizeof(struct omap_hwmod_link);
-
- ls_supp++;
- pr_debug("omap_hwmod: supplemental link allocations needed: %d\n",
- ls_supp * LINKS_PER_OCP_IF);
-
- return 0;
-};
-
-/**
* _add_link - add an interconnect between two IP blocks
* @oi: pointer to a struct omap_hwmod_ocp_if record
*
- * Add struct omap_hwmod_link records connecting the master IP block
- * specified in @oi->master to @oi, and connecting the slave IP block
+ * Add struct omap_hwmod_link records connecting the slave IP block
* specified in @oi->slave to @oi. This code is assumed to run before
* preemption or SMP has been enabled, thus avoiding the need for
* locking in this code. Changes to this assumption will require
@@ -2725,19 +2621,10 @@ static int __init _alloc_links(struct omap_hwmod_link **ml,
*/
static int __init _add_link(struct omap_hwmod_ocp_if *oi)
{
- struct omap_hwmod_link *ml, *sl;
-
pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name,
oi->slave->name);
- _alloc_links(&ml, &sl);
-
- ml->ocp_if = oi;
- list_add(&ml->node, &oi->master->master_ports);
- oi->master->masters_cnt++;
-
- sl->ocp_if = oi;
- list_add(&sl->node, &oi->slave->slave_ports);
+ list_add(&oi->node, &oi->slave->slave_ports);
oi->slave->slaves_cnt++;
return 0;
@@ -2784,45 +2671,6 @@ static int __init _register_link(struct omap_hwmod_ocp_if *oi)
return 0;
}
-/**
- * _alloc_linkspace - allocate large block of hwmod links
- * @ois: pointer to an array of struct omap_hwmod_ocp_if records to count
- *
- * Allocate a large block of struct omap_hwmod_link records. This
- * improves boot time significantly by avoiding the need to allocate
- * individual records one by one. If the number of records to
- * allocate in the block hasn't been manually specified, this function
- * will count the number of struct omap_hwmod_ocp_if records in @ois
- * and use that to determine the allocation size. For SoC families
- * that require multiple list registrations, such as OMAP3xxx, this
- * estimation process isn't optimal, so manual estimation is advised
- * in those cases. Returns -EEXIST if the allocation has already occurred
- * or 0 upon success.
- */
-static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
-{
- unsigned int i = 0;
- unsigned int sz;
-
- if (linkspace) {
- WARN(1, "linkspace already allocated\n");
- return -EEXIST;
- }
-
- if (max_ls == 0)
- while (ois[i++])
- max_ls += LINKS_PER_OCP_IF;
-
- sz = sizeof(struct omap_hwmod_link) * max_ls;
-
- pr_debug("omap_hwmod: %s: allocating %d byte linkspace (%d links)\n",
- __func__, sz, max_ls);
-
- linkspace = memblock_virt_alloc(sz, 0);
-
- return 0;
-}
-
/* Static functions intended only for use in soc_ops field function pointers */
/**
@@ -3180,13 +3028,6 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
if (ois[0] == NULL) /* Empty list */
return 0;
- if (!linkspace) {
- if (_alloc_linkspace(ois)) {
- pr_err("omap_hwmod: could not allocate link space\n");
- return -ENOMEM;
- }
- }
-
i = 0;
do {
r = _register_link(ois[i]);
@@ -3398,14 +3239,10 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
ret += _count_sdma_reqs(oh);
if (flags & IORESOURCE_MEM) {
- int i = 0;
struct omap_hwmod_ocp_if *os;
- struct list_head *p = oh->slave_ports.next;
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node)
ret += _count_ocp_if_addr_spaces(os);
- }
}
return ret;
@@ -3424,7 +3261,6 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt;
int r = 0;
@@ -3454,11 +3290,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
r++;
}
- p = oh->slave_ports.next;
-
- i = 0;
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
addr_cnt = _count_ocp_if_addr_spaces(os);
for (j = 0; j < addr_cnt; j++) {
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 7890401..a8f7793 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -313,6 +313,7 @@ struct omap_hwmod_ocp_if {
struct omap_hwmod_addr_space *addr;
const char *clk;
struct clk *_clk;
+ struct list_head node;
union {
struct omap_hwmod_omap2_firewall omap2;
} fw;
@@ -410,7 +411,6 @@ struct omap_hwmod_class_sysconfig {
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
u8 idlemodes;
- u8 clockact;
};
/**
@@ -531,6 +531,10 @@ struct omap_hwmod_omap4_prcm {
* operate and they need to be handled at the same time as the main_clk.
* HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
* IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
+ * HWMOD_CLKDM_NOAUTO: Allows the hwmod's clockdomain to be prevented from
+ * entering HW_AUTO while hwmod is active. This is needed to workaround
+ * some modules which don't function correctly with HW_AUTO. For example,
+ * DCAN on DRA7x SoC needs this to workaround errata i893.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -548,6 +552,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
#define HWMOD_NO_IDLE (1 << 15)
+#define HWMOD_CLKDM_NOAUTO (1 << 16)
/*
* omap_hwmod._int_flags definitions
@@ -617,16 +622,6 @@ struct omap_hwmod_class {
};
/**
- * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
- * @ocp_if: OCP interface structure record pointer
- * @node: list_head pointing to next struct omap_hwmod_link in a list
- */
-struct omap_hwmod_link {
- struct omap_hwmod_ocp_if *ocp_if;
- struct list_head node;
-};
-
-/**
* struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
* @name: name of the hwmod
* @class: struct omap_hwmod_class * to the class of this hwmod
@@ -686,9 +681,8 @@ struct omap_hwmod {
const char *main_clk;
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
- char *clkdm_name;
+ const char *clkdm_name;
struct clockdomain *clkdm;
- struct list_head master_ports; /* connect to *_IA */
struct list_head slave_ports; /* connect to *_TA */
void *dev_attr;
u32 _sysc_cache;
@@ -698,12 +692,11 @@ struct omap_hwmod {
struct list_head node;
struct omap_hwmod_ocp_if *_mpu_port;
unsigned int (*xlate_irq)(unsigned int);
- u16 flags;
+ u32 flags;
u8 mpu_rt_idx;
u8 response_lat;
u8 rst_lines_cnt;
u8 opt_clks_cnt;
- u8 masters_cnt;
u8 slaves_cnt;
u8 hwmods_cnt;
u8 _int_flags;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index e047033..d190f1a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -55,7 +55,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 1435fee..1c6ca4d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -149,7 +149,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -424,7 +423,6 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -1045,7 +1043,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
- .clockact = 0x2,
};
static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
@@ -1210,7 +1207,6 @@ static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
.sysc_offs = 0x24,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap34xx_sr_sysc_fields,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index dad871a..94f09c7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1320,7 +1320,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -2548,7 +2547,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = {
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index a2d763a..9a67f01 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -839,7 +839,6 @@ static struct omap_hwmod_class_sysconfig omap54xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -1530,7 +1529,6 @@ static struct omap_hwmod_class_sysconfig omap54xx_timer_1ms_sysc = {
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
- .clockact = CLOCKACT_TEST_ICLK,
};
static struct omap_hwmod_class omap54xx_timer_1ms_hwmod_class = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index d058529..b3abb8d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -359,6 +359,7 @@ static struct omap_hwmod dra7xx_dcan1_hwmod = {
.class = &dra7xx_dcan_hwmod_class,
.clkdm_name = "wkupaon_clkdm",
.main_clk = "dcan1_sys_clk_mux",
+ .flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET,
@@ -374,6 +375,7 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
.class = &dra7xx_dcan_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "sys_clkin1",
+ .flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET,
@@ -1098,7 +1100,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -2700,6 +2701,7 @@ static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = {
.class = &dra7xx_usb_otg_ss_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "dpll_core_h13x2_ck",
+ .flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET,
@@ -2721,6 +2723,7 @@ static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = {
.class = &dra7xx_usb_otg_ss_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "dpll_core_h13x2_ck",
+ .flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index b82b77c..310afe4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -106,6 +106,7 @@
*/
#define DM81XX_CM_DEFAULT_OFFSET 0x500
#define DM81XX_CM_DEFAULT_USB_CLKCTRL (0x558 - DM81XX_CM_DEFAULT_OFFSET)
+#define DM81XX_CM_DEFAULT_SATA_CLKCTRL (0x560 - DM81XX_CM_DEFAULT_OFFSET)
/* L3 Interconnect entries clocked at 125, 250 and 500MHz */
static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = {
@@ -973,6 +974,38 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = {
.user = OCP_USER_MPU,
};
+static struct omap_hwmod_class_sysconfig dm81xx_sata_sysc = {
+ .sysc_offs = 0x1100,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = SIDLE_FORCE,
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dm81xx_sata_hwmod_class = {
+ .name = "sata",
+ .sysc = &dm81xx_sata_sysc,
+};
+
+static struct omap_hwmod dm81xx_sata_hwmod = {
+ .name = "sata",
+ .clkdm_name = "default_sata_clkdm",
+ .flags = HWMOD_NO_IDLEST,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DM81XX_CM_DEFAULT_SATA_CLKCTRL,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .class = &dm81xx_sata_hwmod_class,
+};
+
+static struct omap_hwmod_ocp_if dm81xx_l4_hs__sata = {
+ .master = &dm81xx_l4_hs_hwmod,
+ .slave = &dm81xx_sata_hwmod,
+ .clk = "sysclk5_ck",
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x110,
@@ -1474,6 +1507,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_l4_hs__emac0,
&dm81xx_emac0__mdio,
&dm816x_l4_hs__emac1,
+ &dm81xx_l4_hs__sata,
&dm81xx_alwon_l3_fast__tpcc,
&dm81xx_alwon_l3_fast__tptc0,
&dm81xx_alwon_l3_fast__tptc1,
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 0598630..63027e6 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -163,7 +163,6 @@ static int omap_pm_enter(suspend_state_t suspend_state)
return -ENOENT; /* XXX doublecheck */
switch (suspend_state) {
- case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap_pm_suspend();
break;
diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
index 8fa4557..e3610c5 100644
--- a/arch/arm/mach-oxnas/Kconfig
+++ b/arch/arm/mach-oxnas/Kconfig
@@ -28,7 +28,6 @@
depends on ARCH_MULTI_V6
select ARM_GIC
select DMA_CACHE_RWFO if SMP
- select CPU_V6K
select HAVE_SMP
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
new file mode 100644
index 0000000..2d1419e
--- /dev/null
+++ b/arch/arm/mach-stm32/Kconfig
@@ -0,0 +1,26 @@
+config ARCH_STM32
+ bool "STMicrolectronics STM32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARMV7M_SYSTICK
+ select CLKSRC_STM32
+ select PINCTRL
+ select RESET_CONTROLLER
+ select STM32_EXTI
+ help
+ Support for STMicroelectronics STM32 processors.
+
+config MACH_STM32F429
+ bool "STMicrolectronics STM32F429"
+ depends on ARCH_STM32
+ default y
+
+config MACH_STM32F746
+ bool "STMicrolectronics STM32F746"
+ depends on ARCH_STM32
+ default y
+
+config MACH_STM32H743
+ bool "STMicrolectronics STM32H743"
+ depends on ARCH_STM32
+ default y
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index c354222..e918686 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -12,6 +12,7 @@ static const char *const stm32_compat[] __initconst = {
"st,stm32f429",
"st,stm32f469",
"st,stm32f746",
+ "st,stm32h743",
NULL
};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b9863f9..58153cd 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,7 @@
select GENERIC_IRQ_CHIP
select GPIOLIB
select PINCTRL
+ select PM_OPP
select SUN4I_TIMER
select RESET_CONTROLLER
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index fffad24..3b33f0bb 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -2,7 +2,6 @@
obj-y += io.o
obj-y += irq.o
-obj-y += flowctrl.o
obj-y += pm.o
obj-y += reset.o
obj-y += reset-handler.o
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index afcee04..76e4c83 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -26,12 +26,13 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <soc/tegra/flowctrl.h>
+
#include <asm/cpuidle.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include "cpuidle.h"
-#include "flowctrl.h"
#include "iomap.h"
#include "irq.h"
#include "pm.h"
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 75620ae..b5a2afe 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -21,6 +21,7 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
+#include <soc/tegra/flowctrl.h>
#include <soc/tegra/fuse.h>
#include <soc/tegra/pmc.h>
@@ -30,7 +31,6 @@
#include <asm/smp_scu.h>
#include "common.h"
-#include "flowctrl.h"
#include "iomap.h"
#include "reset.h"
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index b0f48a3..1ad5719 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -27,6 +27,7 @@
#include <linux/spinlock.h>
#include <linux/suspend.h>
+#include <soc/tegra/flowctrl.h>
#include <soc/tegra/fuse.h>
#include <soc/tegra/pm.h>
#include <soc/tegra/pmc.h>
@@ -38,7 +39,6 @@
#include <asm/suspend.h>
#include <asm/tlbflush.h>
-#include "flowctrl.h"
#include "iomap.h"
#include "pm.h"
#include "reset.h"
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index e3070fda..805f306 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -17,12 +17,12 @@
#include <linux/init.h>
#include <linux/linkage.h>
+#include <soc/tegra/flowctrl.h>
#include <soc/tegra/fuse.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
-#include "flowctrl.h"
#include "iomap.h"
#include "reset.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index f5d1966..5c8e638 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -20,6 +20,8 @@
#include <linux/linkage.h>
+#include <soc/tegra/flowctrl.h>
+
#include <asm/assembler.h>
#include <asm/proc-fns.h>
#include <asm/cp15.h>
@@ -27,7 +29,6 @@
#include "irammap.h"
#include "sleep.h"
-#include "flowctrl.h"
#define EMC_CFG 0xc
#define EMC_ADR_CFG 0x10
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 16e5ff0..dd4a67d 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -16,13 +16,13 @@
#include <linux/linkage.h>
+#include <soc/tegra/flowctrl.h>
#include <soc/tegra/fuse.h>
#include <asm/asm-offsets.h>
#include <asm/assembler.h>
#include <asm/cache.h>
-#include "flowctrl.h"
#include "irammap.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index f024a51..5e34967 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -30,8 +30,6 @@
#include <asm/hardware/cache-l2x0.h>
#include "iomap.h"
-
-#include "flowctrl.h"
#include "sleep.h"
#define CLK_RESET_CCLK_BURST 0x20
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index e01cbca..649e9e8 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -48,7 +48,6 @@
#include "board.h"
#include "common.h"
#include "cpuidle.h"
-#include "flowctrl.h"
#include "iomap.h"
#include "irq.h"
#include "pm.h"
@@ -75,7 +74,6 @@ static void __init tegra_init_early(void)
{
of_register_trusted_foundations();
tegra_cpu_reset_handler_init();
- tegra_flowctrl_init();
}
static void __init tegra_dt_init_irq(void)
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 2c371ff..ac6fd1a 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -46,6 +46,9 @@ void clk_disable(struct clk *clk)
{
unsigned long flags;
+ if (!clk)
+ return;
+
WARN_ON(clk->enabled == 0);
spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 0268584..c742dfd 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -2408,6 +2408,15 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
const struct dma_map_ops *dma_ops;
dev->archdata.dma_coherent = coherent;
+
+ /*
+ * Don't override the dma_ops if they have already been set. Ideally
+ * this should be the only location where dma_ops are set, remove this
+ * check when all other callers of set_dma_ops will have disappeared.
+ */
+ if (dev->dma_ops)
+ return;
+
if (arm_setup_iommu_dma_ops(dev, dma_base, size, iommu))
dma_ops = arm_get_iommu_dma_map_ops(coherent);
else
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index ff0eed2..fc91205 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -481,6 +481,13 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
__pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte));
}
EXPORT_SYMBOL_GPL(pci_ioremap_io);
+
+void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size)
+{
+ return arch_ioremap_caller(res_cookie, size, MT_UNCACHED,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL_GPL(pci_remap_cfgspace);
#endif
/*
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 33a45bd9..3b8e728 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -436,6 +436,18 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size)
}
EXPORT_SYMBOL(ioremap_wc);
+#ifdef CONFIG_PCI
+
+#include <asm/mach/map.h>
+
+void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size)
+{
+ return arch_ioremap_caller(res_cookie, size, MT_UNCACHED,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL_GPL(pci_remap_cfgspace);
+#endif
+
void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
{
return (void *)phys_addr;
diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c
index 3b69f26..1403cb4 100644
--- a/arch/arm/mm/pageattr.c
+++ b/arch/arm/mm/pageattr.c
@@ -15,6 +15,7 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <asm/set_memory.h>
struct page_change_data {
pgprot_t set_mask;
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 93d0b6d..d5b9fa1 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -18,6 +18,7 @@
#include <linux/if_vlan.h>
#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/hwcap.h>
#include <asm/opcodes.h>
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 03fac12..dc269d9 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -10,7 +10,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/amba/pl330.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
diff --git a/arch/arm/plat-versatile/include/plat/clock.h b/arch/arm/plat-versatile/include/plat/clock.h
deleted file mode 100644
index 3cfb024..0000000
--- a/arch/arm/plat-versatile/include/plat/clock.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef PLAT_CLOCK_H
-#define PLAT_CLOCK_H
-
-#include <asm/hardware/icst.h>
-
-struct clk_ops {
- long (*round)(struct clk *, unsigned long);
- int (*set)(struct clk *, unsigned long);
- void (*setvco)(struct clk *, struct icst_vco);
-};
-
-int icst_clk_set(struct clk *, unsigned long);
-long icst_clk_round(struct clk *, unsigned long);
-
-#endif
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 129cc5a..4afcffc 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -2,9 +2,10 @@
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
+ select ARCH_HAS_RESET_CONTROLLER
select GENERIC_IRQ_CHIP
select PINCTRL
- select PINCTRL_SUN50I_A64
+ select RESET_CONTROLLER
help
This enables support for Allwinner sunxi based SoCs like the A64.
@@ -54,6 +55,8 @@
config ARCH_EXYNOS
bool "ARMv8 based Samsung Exynos SoC family"
select COMMON_CLK_SAMSUNG
+ select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
+ select EXYNOS_PMU
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index bc6f342..244e8b7 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 0565779..c7f669f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -98,6 +98,14 @@
clock-output-names = "osc32k";
};
+ iosc: internal-osc-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ clock-accuracy = <300000000>;
+ clock-output-names = "iosc";
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -394,5 +402,26 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ r_ccu: clock@1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ r_pio: pinctrl@01f02c00 {
+ compatible = "allwinner,sun50i-a64-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
new file mode 100644
index 0000000..dfecc17
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Xunlong Orange Pi PC 2";
+ compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r-gpio-keys {
+ compatible = "gpio-keys";
+
+ sw4 {
+ label = "sw4";
+ linux,code = <BTN_0>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A ports' VBUS is always on */
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
new file mode 100644
index 0000000..4d314a2
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-h3-h5.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
+
+&ccu {
+ compatible = "allwinner,sun50i-h5-ccu";
+};
+
+&mmc0 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc";
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+};
+
+&mmc1 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc";
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+};
+
+&mmc2 {
+ compatible = "allwinner,sun50i-h5-emmc",
+ "allwinner,sun50i-a64-emmc";
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+};
+
+&pio {
+ compatible = "allwinner,sun50i-h5-pinctrl";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi
new file mode 120000
index 0000000..036f01d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/sunxi-h3-h5.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 3f94bce..b9ad2db 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -7,9 +7,11 @@
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 7a078be..a84e276 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -98,6 +98,27 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -188,3 +209,21 @@
ðmac {
status = "okay";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 620495a..436b875 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -71,6 +71,14 @@
reg = <0x0 0x10000000 0x0 0x200000>;
no-map;
};
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0xbc00000>;
+ alignment = <0x0 0x400000>;
+ linux,cma-default;
+ };
};
cpus {
@@ -233,7 +241,7 @@
};
i2c_A: i2c@8500 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@@ -279,7 +287,7 @@
};
i2c_B: i2c@87c0 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@@ -288,7 +296,7 @@
};
i2c_C: i2c@87e0 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@@ -296,6 +304,14 @@
status = "disabled";
};
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
+ reg = <0x0 0x08c80 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
watchdog@98d0 {
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
@@ -317,7 +333,7 @@
};
sram: sram@c8000000 {
- compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+ compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
@@ -325,12 +341,12 @@
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
+ compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
+ compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
@@ -342,6 +358,13 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+ clkc_AO: clock-controller@040 {
+ compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
+ reg = <0x0 0x00040 0x0 0x4>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
@@ -358,6 +381,15 @@
status = "disabled";
};
+ i2c_AO: i2c@500 {
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x500 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pwm_AO_ab: pwm@550 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x00550 0x0 0x10>;
@@ -366,7 +398,7 @@
};
ir: ir@580 {
- compatible = "amlogic,meson-gxbb-ir";
+ compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
@@ -386,7 +418,6 @@
};
};
-
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
@@ -410,7 +441,6 @@
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
- phy-mode = "rgmii";
status = "disabled";
};
@@ -457,6 +487,38 @@
cvbs_vdac_port: port@0 {
reg = <0>;
};
+
+ /* HDMI-TX output port */
+ hdmi_tx_port: port@1 {
+ reg = <1>;
+
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_tx_in>;
+ };
+ };
+ };
+
+ hdmi_tx: hdmi-tx@c883a000 {
+ compatible = "amlogic,meson-gx-dw-hdmi";
+ reg = <0x0 0xc883a000 0x0 0x1c>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ /* VPU VENC Input */
+ hdmi_tx_venc_port: port@0 {
+ reg = <0>;
+
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+
+ /* TMDS Output */
+ hdmi_tx_tmds_port: port@1 {
+ reg = <1>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 4cbd626..87198ea 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -152,6 +152,17 @@
};
};
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
&uart_AO {
@@ -164,7 +175,24 @@
status = "okay";
pinctrl-0 = <ð_rmii_pins>;
pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
phy-mode = "rmii";
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* IC Plus IP101GR (0x02430c54) */
+ reg = <0>;
+ };
+ };
};
&ir {
@@ -245,3 +273,15 @@
remote-endpoint = <&cvbs_connector_in>;
};
};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index c59403a..54a9c6a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -96,7 +96,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -152,6 +152,13 @@
pinctrl-0 = <ð_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ amlogic,tx-delay-ns = <2>;
mdio {
compatible = "snps,dwmac-mdio";
@@ -165,6 +172,57 @@
};
};
+&pinctrl_aobus {
+ gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
+ "USB HUB nRESET", "USB OTG Power En",
+ "J7 Header Pin2", "IR In", "J7 Header Pin4",
+ "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
+ "HDMI CEC", "SYS LED";
+};
+
+&pinctrl_periphs {
+ gpio-line-names = /* Bank GPIOZ */
+ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+ "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+ "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+ "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+ "Eth PHY nRESET", "Eth PHY Intc",
+ /* Bank GPIOH */
+ "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
+ /* Bank BOOT */
+ "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+ "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+ "eMMC Reset", "eMMC CMD",
+ "", "", "", "", "", "", "",
+ /* Bank CARD */
+ "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+ "SDCard D3", "SDCard D2", "SDCard Det",
+ /* Bank GPIODV */
+ "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "",
+ "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+ "PWM D", "PWM B",
+ /* Bank GPIOY */
+ "Revision Bit0", "Revision Bit1", "",
+ "J2 Header Pin35", "", "", "", "J2 Header Pin36",
+ "J2 Header Pin31", "", "", "", "TF VDD En",
+ "J2 Header Pin32", "J2 Header Pin26", "", "",
+ /* Bank GPIOX */
+ "J2 Header Pin29", "J2 Header Pin24",
+ "J2 Header Pin23", "J2 Header Pin22",
+ "J2 Header Pin21", "J2 Header Pin18",
+ "J2 Header Pin33", "J2 Header Pin19",
+ "J2 Header Pin16", "J2 Header Pin15",
+ "J2 Header Pin12", "J2 Header Pin13",
+ "J2 Header Pin8", "J2 Header Pin10",
+ "", "", "", "", "",
+ "J2 Header Pin11", "", "J2 Header Pin7",
+ /* Bank GPIOCLK */
+ "", "", "", "",
+ /* GPIO_TEST_N */
+ "";
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
@@ -177,6 +235,21 @@
pinctrl-names = "default";
};
+&gpio_ao {
+ /*
+ * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
&usb0_phy {
status = "okay";
phy-supply = <&usb_otg_pwr>;
@@ -194,6 +267,11 @@
status = "okay";
};
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc1v8>;
+};
+
/* SD */
&sd_emmc_b {
status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index fc0e86c..2054a47 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -96,6 +96,31 @@
};
};
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@3 {
+ /* Micrel KSZ9031 (0x00221620) */
+ reg = <3>;
+ };
+ };
+};
+
&i2c_B {
status = "okay";
pinctrl-0 = <&i2c_b_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
index 39bb037..ae31946 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
@@ -50,3 +50,14 @@
compatible = "amlogic,p201", "amlogic,meson-gxbb";
model = "Amlogic Meson GXBB P201 Development Board";
};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 4a96e0f..3c6c0b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -135,6 +135,17 @@
};
};
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -144,12 +155,6 @@
pinctrl-names = "default";
};
-ðmac {
- status = "okay";
- pinctrl-0 = <ð_rgmii_pins>;
- pinctrl-names = "default";
-};
-
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
@@ -250,3 +255,15 @@
remote-endpoint = <&cvbs_connector_in>;
};
};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 86709929..aefa66d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -115,7 +115,6 @@
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
-
};
&ir {
@@ -128,6 +127,26 @@
status = "okay";
pinctrl-0 = <ð_rgmii_pins>;
pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ };
+ };
};
&usb0_phy {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
index 56f8559..f057fb4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -64,3 +64,29 @@
status = "disabled";
};
};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index ea79fdd..743acb5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -87,6 +87,32 @@
};
};
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ };
+ };
+};
+
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index a375cb2..86105a6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -97,17 +97,6 @@
};
};
-&cbus {
- spifc: spi@8c80 {
- compatible = "amlogic,meson-gxbb-spifc";
- reg = <0x0 0x08c80 0x0 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_SPI>;
- status = "disabled";
- };
-};
-
ðmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
@@ -129,6 +118,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 14>;
};
uart_ao_a_pins: uart_ao_a {
@@ -203,30 +193,62 @@
function = "pwm_ao_b";
};
};
- };
- clkc_AO: clock-controller@040 {
- compatible = "amlogic,gxbb-aoclkc";
- reg = <0x0 0x00040 0x0 0x4>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
+ i2s_am_clk_pins: i2s_am_clk {
+ mux {
+ groups = "i2s_am_clk";
+ function = "i2s_out_ao";
+ };
+ };
- pwm_ab_AO: pwm@550 {
- compatible = "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x0550 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
+ i2s_out_ao_clk_pins: i2s_out_ao_clk {
+ mux {
+ groups = "i2s_out_ao_clk";
+ function = "i2s_out_ao";
+ };
+ };
- i2c_AO: i2c@500 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x500 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_AO_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ i2s_out_lr_clk_pins: i2s_out_lr_clk {
+ mux {
+ groups = "i2s_out_lr_clk";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
+ mux {
+ groups = "i2s_out_ch01_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+ mux {
+ groups = "i2s_out_ch23_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+ mux {
+ groups = "i2s_out_ch45_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ spdif_out_ao_6_pins: spdif_out_ao_6 {
+ mux {
+ groups = "spdif_out_ao_6";
+ function = "spdif_out_ao";
+ };
+ };
+
+ spdif_out_ao_13_pins: spdif_out_ao_13 {
+ mux {
+ groups = "spdif_out_ao_13";
+ function = "spdif_out_ao";
+ };
+ };
};
};
@@ -245,6 +267,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_periphs 0 14 120>;
};
emmc_pins: emmc {
@@ -467,6 +490,34 @@
function = "hdmi_i2c";
};
};
+
+ i2sout_ch23_y_pins: i2sout_ch23_y {
+ mux {
+ groups = "i2sout_ch23_y";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch45_y_pins: i2sout_ch45_y {
+ mux {
+ groups = "i2sout_ch45_y";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch67_y_pins: i2sout_ch67_y {
+ mux {
+ groups = "i2sout_ch67_y";
+ function = "i2s_out";
+ };
+ };
+
+ spdif_out_y_pins: spdif_out_y {
+ mux {
+ groups = "spdif_out_y";
+ function = "spdif_out";
+ };
+ };
};
};
@@ -478,10 +529,51 @@
};
};
+&apb {
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
+};
+
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
@@ -521,6 +613,10 @@
clock-names = "core", "clkin0", "clkin1";
};
+&spifc {
+ clocks = <&clkc CLKID_SPI>;
+};
+
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
@@ -529,3 +625,15 @@
clocks = <&clkc CLKID_RNG0>;
clock-names = "core";
};
+
+&hdmi_tx {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
new file mode 100644
index 0000000..f06cc234
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&apb {
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index f66939c..f9fbfda 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -43,12 +43,47 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
+
#include "meson-gxl-s905d.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905D) P230 Development Board";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-function {
+ label = "Update";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
};
/* P230 has exclusive choice between internal or external PHY */
@@ -59,6 +94,8 @@
/* Select external PHY by default */
phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
@@ -75,3 +112,8 @@
max-speed = <1000>;
};
};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
index 615308e..5a90e30 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
@@ -42,6 +42,7 @@
*/
#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
/ {
compatible = "amlogic,s905d", "amlogic,meson-gxl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
new file mode 100644
index 0000000..2a5804c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2017 Carlo Caione
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
+ model = "Hwacom AmazeTV (S905X)";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_card: gpio-regulator {
+ compatible = "regulator-gpio";
+
+ regulator-name = "VDDIO_CARD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+
+ /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+ states = <1800000 0
+ 3300000 1>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
+ status = "okay";
+ phy-mode = "rmii";
+ phy-handle = <&internal_phy>;
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <100000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
new file mode 100644
index 0000000..3c8b0b5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+ compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
+ model = "Khadas VIM";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-function {
+ label = "Function";
+ linux,code = <KEY_FN>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ aliases {
+ serial2 = &uart_AO_B;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ power {
+ label = "vim:red:power";
+ pwms = <&pwm_AO_ab 1 7812500 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c_B {
+ status = "okay";
+ pinctrl-0 = <&i2c_b_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ /* has to be enabled manually when a battery is connected: */
+ status = "disabled";
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&ir {
+ linux,rc-map-name = "rc-geekbox";
+};
+
+&pwm_AO_ab {
+ status = "okay";
+ pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+&pwm_ef {
+ pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+};
+
+&sd_emmc_a {
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
+&uart_AO {
+ status = "okay";
+};
+
+/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
+&uart_AO_B {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_b_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index cea4a3e..8873c05 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -127,6 +127,17 @@
};
};
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
&uart_AO {
@@ -219,3 +230,15 @@
remote-endpoint = <&cvbs_connector_in>;
};
};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9639f01..db31e09 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -43,23 +43,26 @@
/dts-v1/;
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s905x-p212.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
- aliases {
- serial0 = &uart_AO;
- };
+ cvbs-connector {
+ compatible = "composite-video-connector";
- chosen {
- stdout-path = "serial0:115200n8";
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
};
+};
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 0000000..f3eea8e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
index 08237ee..0f78d83 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
@@ -42,6 +42,7 @@
*/
#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
/ {
compatible = "amlogic,s905x", "amlogic,meson-gxl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index fe11b5f..d8e096d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -44,6 +44,7 @@
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
/ {
compatible = "amlogic,meson-gxl";
@@ -79,6 +80,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 14>;
};
uart_ao_a_pins: uart_ao_a {
@@ -103,6 +105,13 @@
};
};
+ uart_ao_b_0_1_pins: uart_ao_b_0_1 {
+ mux {
+ groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
+ function = "uart_ao_b";
+ };
+ };
+
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
@@ -118,12 +127,69 @@
};
};
+ i2c_ao_pins: i2c_ao {
+ mux {
+ groups = "i2c_sck_ao",
+ "i2c_sda_ao";
+ function = "i2c_ao";
+ };
+ };
+
+ pwm_ao_a_3_pins: pwm_ao_a_3 {
+ mux {
+ groups = "pwm_ao_a_3";
+ function = "pwm_ao_a";
+ };
+ };
+
+ pwm_ao_a_8_pins: pwm_ao_a_8 {
+ mux {
+ groups = "pwm_ao_a_8";
+ function = "pwm_ao_a";
+ };
+ };
+
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
+
+ pwm_ao_b_6_pins: pwm_ao_b_6 {
+ mux {
+ groups = "pwm_ao_b_6";
+ function = "pwm_ao_b";
+ };
+ };
+
+ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+ mux {
+ groups = "i2s_out_ch23_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+ mux {
+ groups = "i2s_out_ch45_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ spdif_out_ao_6_pins: spdif_out_ao_6 {
+ mux {
+ groups = "spdif_out_ao_6";
+ function = "spdif_out_ao";
+ };
+ };
+
+ spdif_out_ao_9_pins: spdif_out_ao_9 {
+ mux {
+ groups = "spdif_out_ao_9";
+ function = "spdif_out_ao";
+ };
+ };
};
};
@@ -142,6 +208,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_periphs 0 14 101>;
};
emmc_pins: emmc {
@@ -154,6 +221,16 @@
};
};
+ nor_pins: nor {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_cs";
+ function = "nor";
+ };
+ };
+
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
@@ -277,6 +354,34 @@
};
};
+ pwm_a_pins: pwm_a {
+ mux {
+ groups = "pwm_a";
+ function = "pwm_a";
+ };
+ };
+
+ pwm_b_pins: pwm_b {
+ mux {
+ groups = "pwm_b";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_c_pins: pwm_c {
+ mux {
+ groups = "pwm_c";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_d_pins: pwm_d {
+ mux {
+ groups = "pwm_d";
+ function = "pwm_d";
+ };
+ };
+
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
@@ -284,6 +389,20 @@
};
};
+ pwm_f_clk_pins: pwm_f_clk {
+ mux {
+ groups = "pwm_f_clk";
+ function = "pwm_f";
+ };
+ };
+
+ pwm_f_x_pins: pwm_f_x {
+ mux {
+ groups = "pwm_f_x";
+ function = "pwm_f";
+ };
+ };
+
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
@@ -297,6 +416,61 @@
function = "hdmi_i2c";
};
};
+
+ i2s_am_clk_pins: i2s_am_clk {
+ mux {
+ groups = "i2s_am_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ao_clk_pins: i2s_out_ao_clk {
+ mux {
+ groups = "i2s_out_ao_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_lr_clk_pins: i2s_out_lr_clk {
+ mux {
+ groups = "i2s_out_lr_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ch01_pins: i2s_out_ch01 {
+ mux {
+ groups = "i2s_out_ch01";
+ function = "i2s_out";
+ };
+ };
+ i2sout_ch23_z_pins: i2sout_ch23_z {
+ mux {
+ groups = "i2sout_ch23_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch45_z_pins: i2sout_ch45_z {
+ mux {
+ groups = "i2sout_ch45_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch67_z_pins: i2sout_ch67_z {
+ mux {
+ groups = "i2sout_ch67_z";
+ function = "i2s_out";
+ };
+ };
+
+ spdif_out_h_pins: spdif_out_ao_h {
+ mux {
+ groups = "spdif_out_h";
+ function = "spdif_out";
+ };
+ };
};
eth-phy-mux {
@@ -339,6 +513,10 @@
clocks = <&clkc CLKID_I2C>;
};
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
@@ -378,6 +556,22 @@
clock-names = "core", "clkin0", "clkin1";
};
+&spifc {
+ clocks = <&clkc CLKID_SPI>;
+};
+
&vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
};
+
+&hdmi_tx {
+ compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 5a337d3..11b0bf4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -100,6 +100,17 @@
};
};
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -162,6 +173,8 @@
/* Select external PHY by default */
phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
@@ -183,3 +196,15 @@
remote-endpoint = <&cvbs_connector_in>;
};
};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index 5dbc660..b65776b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -43,12 +43,47 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
+
#include "meson-gxm.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm";
model = "Amlogic Meson GXM (S912) Q200 Development Board";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-function {
+ label = "Update";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button@0 {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
};
/* Q200 has exclusive choice between internal or external PHY */
@@ -59,6 +94,8 @@
/* Select external PHY by default */
phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
@@ -75,3 +112,8 @@
max-speed = <1000>;
};
};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index ddea730..fe451cc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -130,3 +130,6 @@
compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
};
+&hdmi_tx {
+ compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+};
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index df539e8..bfe7d68 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -428,7 +428,7 @@
};
};
- pcie_ctlr: pcie-controller@40000000 {
+ pcie_ctlr: pcie@40000000 {
compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
device_type = "pci";
reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
@@ -699,7 +699,7 @@
<0x00000008 0x80000000 0x1 0x80000000>;
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 0986016..2ac4322 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -137,7 +137,7 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
@@ -148,7 +148,7 @@
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- apbregs@010000 {
+ apbregs@10000 {
compatible = "syscon", "simple-mfd";
reg = <0x010000 0x1000>;
@@ -216,7 +216,7 @@
};
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <5>;
@@ -228,7 +228,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <8>;
@@ -236,7 +236,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <8>;
@@ -244,7 +244,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x10000>;
interrupts = <7>;
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index 0033c59..0e8943a 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -89,6 +89,12 @@
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -100,6 +106,12 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -111,6 +123,12 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -122,6 +140,12 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -133,6 +157,12 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -144,6 +174,12 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -152,10 +188,16 @@
A57_L2: l2-cache0 {
compatible = "cache";
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
};
A53_L2: l2-cache1 {
compatible = "cache";
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
};
};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index 218d0e4..405e2fb 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -89,6 +89,12 @@
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
next-level-cache = <&A72_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -100,6 +106,12 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
next-level-cache = <&A72_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -111,6 +123,12 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -122,6 +140,12 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -133,6 +157,12 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -144,6 +174,12 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -152,10 +188,16 @@
A72_L2: l2-cache0 {
compatible = "cache";
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
};
A53_L2: l2-cache1 {
compatible = "cache";
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
};
};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index bb2820e..0220494 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -88,6 +88,12 @@
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -99,6 +105,12 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -110,6 +122,12 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -121,6 +139,12 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -132,6 +156,12 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -143,6 +173,12 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
@@ -151,10 +187,16 @@
A57_L2: l2-cache0 {
compatible = "cache";
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
};
A53_L2: l2-cache1 {
compatible = "cache";
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
};
};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index f1caece..bfa8f8e 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,6 +1,5 @@
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
-dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 5ae0816..ec19fbf 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -57,55 +57,55 @@
};
&enet {
- status = "ok";
+ status = "okay";
};
&pci_phy0 {
- status = "ok";
+ status = "okay";
};
&pci_phy1 {
- status = "ok";
+ status = "okay";
};
&pcie0 {
- status = "ok";
+ status = "okay";
};
&pcie4 {
- status = "ok";
+ status = "okay";
};
&pcie8 {
- status = "ok";
+ status = "okay";
};
&i2c0 {
- status = "ok";
+ status = "okay";
};
&i2c1 {
- status = "ok";
+ status = "okay";
};
&uart0 {
- status = "ok";
+ status = "okay";
};
&uart1 {
- status = "ok";
+ status = "okay";
};
&uart2 {
- status = "ok";
+ status = "okay";
};
&uart3 {
- status = "ok";
+ status = "okay";
};
&ssp0 {
- status = "ok";
+ status = "okay";
slic@0 {
compatible = "silabs,si3226x";
@@ -126,7 +126,7 @@
};
&ssp1 {
- status = "ok";
+ status = "okay";
at25@0 {
compatible = "atmel,at25";
@@ -150,23 +150,23 @@
};
&sata_phy0 {
- status = "ok";
+ status = "okay";
};
&sata_phy1 {
- status = "ok";
+ status = "okay";
};
&sata {
- status = "ok";
+ status = "okay";
};
&sdio0 {
- status = "ok";
+ status = "okay";
};
&sdio1 {
- status = "ok";
+ status = "okay";
};
&nand {
diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
index 99a2723..ab4ae1a 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
@@ -54,15 +54,15 @@
};
&enet {
- status = "ok";
+ status = "okay";
};
&i2c0 {
- status = "ok";
+ status = "okay";
};
&i2c1 {
- status = "ok";
+ status = "okay";
};
&mdio_mux_iproc {
@@ -122,27 +122,27 @@
};
&pci_phy0 {
- status = "ok";
+ status = "okay";
};
&pcie0 {
- status = "ok";
+ status = "okay";
};
&pcie8 {
- status = "ok";
+ status = "okay";
};
&sata_phy0 {
- status = "ok";
+ status = "okay";
};
&sata_phy1 {
- status = "ok";
+ status = "okay";
};
&sata {
- status = "ok";
+ status = "okay";
};
&qspi {
@@ -187,5 +187,5 @@
};
&uart3 {
- status = "ok";
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index bcb03fc..35a309a 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -222,6 +222,12 @@
brcm,use-bcm-hdr;
};
+ crypto0: crypto@612d0000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x612d0000 0x900>;
+ mboxes = <&pdc0 0>;
+ };
+
pdc1: iproc-pdc1@612e0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x612e0000 0x445>; /* PDC FS1 regs */
@@ -232,6 +238,12 @@
brcm,use-bcm-hdr;
};
+ crypto1: crypto@612f0000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x612f0000 0x900>;
+ mboxes = <&pdc1 0>;
+ };
+
pdc2: iproc-pdc2@61300000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61300000 0x445>; /* PDC FS2 regs */
@@ -242,6 +254,12 @@
brcm,use-bcm-hdr;
};
+ crypto2: crypto@61310000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x61310000 0x900>;
+ mboxes = <&pdc2 0>;
+ };
+
pdc3: iproc-pdc3@61320000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61320000 0x445>; /* PDC FS3 regs */
@@ -252,6 +270,12 @@
brcm,use-bcm-hdr;
};
+ crypto3: crypto@61330000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x61330000 0x900>;
+ mboxes = <&pdc3 0>;
+ };
+
dma0: dma@61360000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>;
diff --git a/arch/arm64/boot/dts/cavium/Makefile b/arch/arm64/boot/dts/cavium/Makefile
index e34f89d..581b2c1 100644
--- a/arch/arm64/boot/dts/cavium/Makefile
+++ b/arch/arm64/boot/dts/cavium/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
+dtb-$(CONFIG_ARCH_THUNDER2) += thunder2-99xx.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/broadcom/vulcan-eval.dts b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
similarity index 71%
rename from arch/arm64/boot/dts/broadcom/vulcan-eval.dts
rename to arch/arm64/boot/dts/cavium/thunder2-99xx.dts
index 9ee8d3d..6c6fb86 100644
--- a/arch/arm64/boot/dts/broadcom/vulcan-eval.dts
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
@@ -1,6 +1,7 @@
/*
- * dts file for Broadcom (BRCM) Vulcan Evaluation Platform
+ * dts file for Cavium ThunderX2 CN99XX Evaluation Platform
*
+ * Copyright (c) 2017 Cavium Inc.
* Copyright (c) 2013-2016 Broadcom
*
* This program is free software; you can redistribute it and/or
@@ -11,11 +12,11 @@
/dts-v1/;
-#include "vulcan.dtsi"
+#include "thunder2-99xx.dtsi"
/ {
- model = "Broadcom Vulcan Eval Platform";
- compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
+ model = "Cavium ThunderX2 CN99XX";
+ compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
memory {
device_type = "memory";
diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
similarity index 87%
rename from arch/arm64/boot/dts/broadcom/vulcan.dtsi
rename to arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
index 34e11a9..4220fbd 100644
--- a/arch/arm64/boot/dts/broadcom/vulcan.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
@@ -1,6 +1,7 @@
/*
- * dtsi file for Broadcom (BRCM) Vulcan processor
+ * dtsi file for Cavium ThunderX2 CN99XX processor
*
+ * Copyright (c) 2017 Cavium Inc.
* Copyright (c) 2013-2016 Broadcom
* Author: Zi Shen Lim <zlim@broadcom.com>
*
@@ -13,8 +14,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
- model = "Broadcom Vulcan";
- compatible = "brcm,vulcan-soc";
+ model = "Cavium ThunderX2 CN99XX";
+ compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
@@ -26,28 +27,28 @@
cpu@0 {
device_type = "cpu";
- compatible = "brcm,vulcan", "arm,armv8";
+ compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu@1 {
device_type = "cpu";
- compatible = "brcm,vulcan", "arm,armv8";
+ compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu@2 {
device_type = "cpu";
- compatible = "brcm,vulcan", "arm,armv8";
+ compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu@3 {
device_type = "cpu";
- compatible = "brcm,vulcan", "arm,armv8";
+ compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
index c42dc39..ec11343 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -94,27 +94,27 @@
compatible = "operating-points-v2";
opp-shared;
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1075000>;
};
- opp@267000000 {
+ opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <1000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <975000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <962500>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <950000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <937500>;
};
@@ -123,19 +123,19 @@
bus_g2d_266_opp_table: opp_table3 {
compatible = "operating-points-v2";
- opp@267000000 {
+ opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
@@ -143,13 +143,13 @@
bus_gscl_opp_table: opp_table4 {
compatible = "operating-points-v2";
- opp@333000000 {
+ opp-333000000 {
opp-hz = /bits/ 64 <333000000>;
};
- opp@222000000 {
+ opp-222000000 {
opp-hz = /bits/ 64 <222000000>;
};
- opp@166500000 {
+ opp-166500000 {
opp-hz = /bits/ 64 <166500000>;
};
};
@@ -158,22 +158,22 @@
compatible = "operating-points-v2";
opp-shared;
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
- opp@267000000 {
+ opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
@@ -181,16 +181,16 @@
bus_noc2_opp_table: opp_table6 {
compatible = "operating-points-v2";
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
- opp@134000000 {
+ opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 098ad55..e2b0da2 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -106,6 +106,13 @@
};
};
+ irda_regulator: irda-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
+ regulator-name = "irda_regulator";
+ };
+
sound {
compatible = "samsung,tm2-audio";
audio-codec = <&wm5110>;
@@ -298,6 +305,8 @@
status = "okay";
vddcore-supply = <&ldo6_reg>;
vddio-supply = <&ldo7_reg>;
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
samsung,pll-clock-frequency = <24000000>;
pinctrl-names = "default";
pinctrl-0 = <&te_irq>;
@@ -749,6 +758,19 @@
};
};
+&hsi2c_5 {
+ status = "okay";
+
+ stmfts: touchscreen@49 {
+ compatible = "st,stmfts";
+ reg = <0x49>;
+ interrupt-parent = <&gpa1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&ldo30_reg>;
+ vdd-supply = <&ldo31_reg>;
+ };
+};
+
&hsi2c_7 {
status = "okay";
@@ -894,7 +916,7 @@
PIN(INPUT, gpa0-7, NONE, FAST_SR1);
PIN(INPUT, gpa1-0, UP, FAST_SR1);
- PIN(INPUT, gpa1-1, NONE, FAST_SR1);
+ PIN(INPUT, gpa1-1, UP, FAST_SR1);
PIN(INPUT, gpa1-2, NONE, FAST_SR1);
PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
@@ -1074,7 +1096,6 @@
PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
- PIN(INPUT, gpg3-7, DOWN, FAST_SR1);
};
};
@@ -1152,6 +1173,24 @@
};
};
+&spi_3 {
+ status = "okay";
+ no-cs-readback;
+
+ irled@0 {
+ compatible = "ir-spi-led";
+ reg = <0x0>;
+ spi-max-frequency = <5000000>;
+ power-supply = <&irda_regulator>;
+ duty-cycle = <60>;
+ led-active-low;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+ };
+};
+
&timer {
clock-frequency = <24000000>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index dea0a6f..3ff9527 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -52,6 +52,18 @@
assigned-clock-rates = <250000000>, <400000000>;
};
+&dsi {
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&hsi2c_9 {
status = "okay";
@@ -76,3 +88,8 @@
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
+
+&stmfts {
+ touchscreen-size-x = <1439>;
+ touchscreen-size-y = <2559>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 7891a31..b73e123 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -52,6 +52,17 @@
assigned-clock-rates = <278000000>, <400000000>;
};
+&dsi {
+ panel@0 {
+ compatible = "samsung,s6e3hf2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>;
@@ -63,3 +74,10 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+&stmfts {
+ touchscreen-size-x = <1599>;
+ touchscreen-size-y = <2559>;
+ touch-key-connected;
+ ledvdd-supply = <&ldo33_reg>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 16072c1..727f36a 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -119,43 +119,43 @@
compatible = "operating-points-v2";
opp-shared;
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <900000>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <925000>;
};
- opp@600000000 {
+ opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000>;
};
- opp@700000000 {
+ opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <975000>;
};
- opp@800000000 {
+ opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
};
- opp@900000000 {
+ opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1050000>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1075000>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1112500>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1112500>;
};
- opp@1300000000 {
+ opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1150000>;
};
@@ -165,63 +165,63 @@
compatible = "operating-points-v2";
opp-shared;
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <900000>;
};
- opp@600000000 {
+ opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000>;
};
- opp@700000000 {
+ opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <912500>;
};
- opp@800000000 {
+ opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <912500>;
};
- opp@900000000 {
+ opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <937500>;
};
- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000>;
};
- opp@1100000000 {
+ opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1012500>;
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1037500>;
};
- opp@1300000000 {
+ opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1062500>;
};
- opp@1400000000 {
+ opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1087500>;
};
- opp@1500000000 {
+ opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1125000>;
};
- opp@1600000000 {
+ opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <1137500>;
};
- opp@1700000000 {
+ opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
opp-microvolt = <1175000>;
};
- opp@1800000000 {
+ opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1212500>;
};
- opp@1900000000 {
+ opp-1900000000 {
opp-hz = /bits/ 64 <1900000000>;
opp-microvolt = <1262500>;
};
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 39db645..72c4b52 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -5,9 +5,13 @@
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index a619f64..17fae81 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -113,3 +113,7 @@
&sai2 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 14a67f1..e2a93d5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -126,3 +126,7 @@
&sai2 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index 62c5c71..ed77f6b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -57,3 +57,7 @@
&i2c0 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index cffebb4..b497ac1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -42,7 +42,8 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "fsl,ls1012a";
@@ -50,6 +51,15 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ crypto = &crypto;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -113,6 +123,95 @@
big-endian;
};
+ crypto: crypto@1700000 {
+ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+ "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x1700000 0x100000>;
+ reg = <0x00 0x1700000 0x0 0x100000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ rtic@60000 {
+ compatible = "fsl,sec-v5.4-rtic",
+ "fsl,sec-v5.0-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000 0x100 0x60e00 0x18>;
+ ranges = <0x0 0x60100 0x500>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v5.4-rtic-memory",
+ "fsl,sec-v5.0-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x100>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v5.4-rtic-memory",
+ "fsl,sec-v5.0-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x100>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v5.4-rtic-memory",
+ "fsl,sec-v5.0-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x100>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v5.4-rtic-memory",
+ "fsl,sec-v5.0-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x400 0x100>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon@1e90000 {
+ compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
+ "fsl,sec-v4.0-mon";
+ reg = <0x0 0x1e90000 0x0 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1012a-dcfg",
"syscon";
@@ -127,6 +226,82 @@
clocks = <&sysclk>;
};
+ tmu: tmu@1f00000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f00000 0x0 0x10000>;
+ interrupts = <0 33 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration = <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ big-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
@@ -238,9 +413,12 @@
sata: sata@3200000 {
compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>;
+ dma-coherent;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index ec13a6e..45cface 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -582,7 +582,9 @@
sata: sata@3200000 {
compatible = "fsl,ls1043a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <0 69 0x4>;
clocks = <&clockgen 4 0>;
dma-coherent;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 4a164b8..f4b8b7e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -587,7 +587,9 @@
sata: sata@3200000 {
compatible = "fsl,ls1046a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
new file mode 100644
index 0000000..8c3cae5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -0,0 +1,123 @@
+/*
+ * Device Tree file for NXP LS1088A QDS Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+ model = "LS1088A QDS Board";
+ compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ temp-sensor@4c {
+ compatible = "adi,adt7461a";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ /* IRQ10_B */
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c512";
+ reg = <0x56>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c512";
+ reg = <0x57>;
+ };
+ };
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
new file mode 100644
index 0000000..8a04fbb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -0,0 +1,107 @@
+/*
+ * Device Tree file for NXP LS1088A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+ model = "L1088A RDB Board";
+ compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ temp-sensor@4c {
+ compatible = "adi,adt7461a";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ /* IRQ10_B */
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
new file mode 100644
index 0000000..2946fd7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -0,0 +1,275 @@
+/*
+ * Device Tree Include file for NXP Layerscape-1088A family SoC.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "fsl,ls1088a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* We have 2 clusters having 4 Cortex-A53 cores each */
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ clocks = <&clockgen 1 0>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ clocks = <&clockgen 1 0>;
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x100>;
+ clocks = <&clockgen 1 1>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x101>;
+ clocks = <&clockgen 1 1>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x102>;
+ clocks = <&clockgen 1 1>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x103>;
+ clocks = <&clockgen 1 1>;
+ };
+ };
+
+ gic: interrupt-controller@6000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
+ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+ interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+ <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+ <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clockgen: clocking@1300000 {
+ compatible = "fsl,ls1088a-clockgen";
+ reg = <0 0x1300000 0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ duart0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ duart1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2320000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@2330000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ifc: ifc@2240000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x2240000 0x0 0x20000>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@2000000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2010000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@2020000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@2030000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ sata: sata@3200000 {
+ compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>;
+ interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+ };
+
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index 8bc1f8f..c1e76df 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -1,8 +1,9 @@
/*
* Device Tree file for Freescale LS2080a QDS Board.
*
- * Copyright (C) 2015, Freescale Semiconductor
+ * Copyright (C) 2015-17, Freescale Semiconductor
*
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* This file is dual-licensed: you can use it either under the terms
@@ -47,6 +48,7 @@
/dts-v1/;
#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
/ {
model = "Freescale Layerscape 2080a QDS Board";
@@ -61,154 +63,3 @@
stdout-path = "serial0:115200n8";
};
};
-
-&esdhc {
- status = "okay";
-};
-
-&ifc {
- status = "okay";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x5 0x80000000 0x08000000
- 0x2 0x0 0x5 0x30000000 0x00010000
- 0x3 0x0 0x5 0x20000000 0x00010000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
- };
-
- nand@2,0 {
- compatible = "fsl,ifc-nand";
- reg = <0x2 0x0 0x10000>;
- };
-
- cpld@3,0 {
- reg = <0x3 0x0 0x10000>;
- compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
- };
-};
-
-&i2c0 {
- status = "okay";
- pca9547@77 {
- compatible = "nxp,pca9547";
- reg = <0x77>;
- #address-cells = <1>;
- #size-cells = <0>;
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x00>;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- };
- };
-
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x02>;
-
- ina220@40 {
- compatible = "ti,ina220";
- reg = <0x40>;
- shunt-resistor = <500>;
- };
-
- ina220@41 {
- compatible = "ti,ina220";
- reg = <0x41>;
- shunt-resistor = <1000>;
- };
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x3>;
-
- adt7481@4c {
- compatible = "adi,adt7461";
- reg = <0x4c>;
- };
- };
- };
-};
-
-&i2c1 {
- status = "disabled";
-};
-
-&i2c2 {
- status = "disabled";
-};
-
-&i2c3 {
- status = "disabled";
-};
-
-&dspi {
- status = "okay";
- dflash0: n25q128a {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <3000000>;
- reg = <0>;
- };
- dflash1: sst25wf040b {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <3000000>;
- reg = <1>;
- };
- dflash2: en25s64 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <3000000>;
- reg = <2>;
- };
-};
-
-&qspi {
- status = "okay";
- flash0: s25fl256s1@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
- flash2: s25fl256s1@2 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&sata0 {
- status = "okay";
-};
-
-&sata1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 2ff46ca..18ad195 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -1,8 +1,9 @@
/*
* Device Tree file for Freescale LS2080a RDB Board.
*
- * Copyright (C) 2015, Freescale Semiconductor
+ * Copyright (C) 2016-17, Freescale Semiconductor
*
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* This file is dual-licensed: you can use it either under the terms
@@ -47,6 +48,7 @@
/dts-v1/;
#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
/ {
model = "Freescale Layerscape 2080a RDB Board";
@@ -61,109 +63,3 @@
stdout-path = "serial1:115200n8";
};
};
-
-&esdhc {
- status = "okay";
-};
-
-&ifc {
- status = "okay";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x5 0x80000000 0x08000000
- 0x2 0x0 0x5 0x30000000 0x00010000
- 0x3 0x0 0x5 0x20000000 0x00010000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
- };
-
- nand@2,0 {
- compatible = "fsl,ifc-nand";
- reg = <0x2 0x0 0x10000>;
- };
-
- cpld@3,0 {
- reg = <0x3 0x0 0x10000>;
- compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
- };
-
-};
-
-&i2c0 {
- status = "okay";
- pca9547@75 {
- compatible = "nxp,pca9547";
- reg = <0x75>;
- #address-cells = <1>;
- #size-cells = <0>;
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x01>;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- };
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x3>;
-
- adt7481@4c {
- compatible = "adi,adt7461";
- reg = <0x4c>;
- };
- };
- };
-};
-
-&i2c1 {
- status = "disabled";
-};
-
-&i2c2 {
- status = "disabled";
-};
-
-&i2c3 {
- status = "disabled";
-};
-
-&dspi {
- status = "okay";
- dflash0: n25q512a {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <3000000>;
- reg = <0>;
- };
-};
-
-&qspi {
- status = "disabled";
-};
-
-&sata0 {
- status = "okay";
-};
-
-&sata1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index e5935f2..46a26c0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -1,8 +1,9 @@
/*
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
- * Copyright (C) 2014-2015, Freescale Semiconductor
+ * Copyright (C) 2014-2016, Freescale Semiconductor
*
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* This file is dual-licensed: you can use it either under the terms
@@ -44,802 +45,122 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include <dt-bindings/thermal/thermal.h>
+#include "fsl-ls208xa.dtsi"
-/ {
- compatible = "fsl,ls2080a";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * We expect the enable-method for cpu's to be "psci", but this
- * is dependent on the SoC FW, which will fill this in.
- *
- * Currently supported enable-method is psci v0.2
- */
-
- /* We have 4 clusters having 2 Cortex-A57 cores each */
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0>;
- clocks = <&clockgen 1 0>;
- next-level-cache = <&cluster0_l2>;
- #cooling-cells = <2>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1>;
- clocks = <&clockgen 1 0>;
- next-level-cache = <&cluster0_l2>;
- };
-
- cpu2: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x100>;
- clocks = <&clockgen 1 1>;
- next-level-cache = <&cluster1_l2>;
- #cooling-cells = <2>;
- };
-
- cpu3: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x101>;
- clocks = <&clockgen 1 1>;
- next-level-cache = <&cluster1_l2>;
- };
-
- cpu4: cpu@200 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x200>;
- clocks = <&clockgen 1 2>;
- next-level-cache = <&cluster2_l2>;
- #cooling-cells = <2>;
- };
-
- cpu5: cpu@201 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x201>;
- clocks = <&clockgen 1 2>;
- next-level-cache = <&cluster2_l2>;
- };
-
- cpu6: cpu@300 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x300>;
- clocks = <&clockgen 1 3>;
- next-level-cache = <&cluster3_l2>;
- #cooling-cells = <2>;
- };
-
- cpu7: cpu@301 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x301>;
- clocks = <&clockgen 1 3>;
- next-level-cache = <&cluster3_l2>;
- };
-
- cluster0_l2: l2-cache0 {
- compatible = "cache";
- };
-
- cluster1_l2: l2-cache1 {
- compatible = "cache";
- };
-
- cluster2_l2: l2-cache2 {
- compatible = "cache";
- };
-
- cluster3_l2: l2-cache3 {
- compatible = "cache";
- };
+&cpu {
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ #cooling-cells = <2>;
};
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>;
- /* DRAM space - 1, size : 2 GB DRAM */
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
};
- sysclk: sysclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- clock-output-names = "sysclk";
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x100>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ #cooling-cells = <2>;
};
- gic: interrupt-controller@6000000 {
- compatible = "arm,gic-v3";
- reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
- <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
- <0x0 0x0c0c0000 0 0x2000>, /* GICC */
- <0x0 0x0c0d0000 0 0x1000>, /* GICH */
- <0x0 0x0c0e0000 0 0x20000>; /* GICV */
- #interrupt-cells = <3>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
- interrupts = <1 9 0x4>;
-
- its: gic-its@6020000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- reg = <0x0 0x6020000 0 0x20000>;
- };
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x101>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
};
- rstcr: syscon@1e60000 {
- compatible = "fsl,ls2080a-rstcr", "syscon";
- reg = <0x0 0x1e60000 0x0 0x4>;
+ cpu4: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x200>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ #cooling-cells = <2>;
};
- reboot {
- compatible ="syscon-reboot";
- regmap = <&rstcr>;
- offset = <0x0>;
- mask = <0x2>;
+ cpu5: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x201>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
- <1 14 4>, /* Physical Non-Secure PPI, active-low */
- <1 11 4>, /* Virtual PPI, active-low */
- <1 10 4>; /* Hypervisor PPI, active-low */
- fsl,erratum-a008585;
+ cpu6: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x300>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
+ #cooling-cells = <2>;
};
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+ cpu7: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x301>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
};
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clockgen: clocking@1300000 {
- compatible = "fsl,ls2080a-clockgen";
- reg = <0 0x1300000 0 0xa0000>;
- #clock-cells = <2>;
- clocks = <&sysclk>;
- };
-
- dcfg: dcfg@1e00000 {
- compatible = "fsl,ls2080a-dcfg", "syscon";
- reg = <0x0 0x1e00000 0x0 0x10000>;
- little-endian;
- };
-
- tmu: tmu@1f80000 {
- compatible = "fsl,qoriq-tmu";
- reg = <0x0 0x1f80000 0x0 0x10000>;
- interrupts = <0 23 0x4>;
- fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
- fsl,tmu-calibration = <0x00000000 0x00000026
- 0x00000001 0x0000002d
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
-
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
-
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
-
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
- little-endian;
- #thermal-sensor-cells = <1>;
- };
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&tmu 4>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu-crit {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu2 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map2 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu4 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map3 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu6 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- serial0: serial@21c0500 {
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
- interrupts = <0 32 0x4>; /* Level high type */
- };
-
- serial1: serial@21c0600 {
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
- interrupts = <0 32 0x4>; /* Level high type */
- };
-
- cluster1_core0_watchdog: wdt@c000000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster1_core1_watchdog: wdt@c010000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster2_core0_watchdog: wdt@c100000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc100000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster2_core1_watchdog: wdt@c110000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc110000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster3_core0_watchdog: wdt@c200000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc200000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster3_core1_watchdog: wdt@c210000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc210000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster4_core0_watchdog: wdt@c300000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc300000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster4_core1_watchdog: wdt@c310000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc310000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- fsl_mc: fsl-mc@80c000000 {
- compatible = "fsl,qoriq-mc";
- reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
- <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
- msi-parent = <&its>;
- #address-cells = <3>;
- #size-cells = <1>;
-
- /*
- * Region type 0x0 - MC portals
- * Region type 0x1 - QBMAN portals
- */
- ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
- 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
-
- /*
- * Define the maximum number of MACs present on the SoC.
- */
- dpmacs {
- #address-cells = <1>;
- #size-cells = <0>;
-
- dpmac1: dpmac@1 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x1>;
- };
-
- dpmac2: dpmac@2 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x2>;
- };
-
- dpmac3: dpmac@3 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x3>;
- };
-
- dpmac4: dpmac@4 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x4>;
- };
-
- dpmac5: dpmac@5 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x5>;
- };
-
- dpmac6: dpmac@6 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x6>;
- };
-
- dpmac7: dpmac@7 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x7>;
- };
-
- dpmac8: dpmac@8 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x8>;
- };
-
- dpmac9: dpmac@9 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x9>;
- };
-
- dpmac10: dpmac@a {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xa>;
- };
-
- dpmac11: dpmac@b {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xb>;
- };
-
- dpmac12: dpmac@c {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xc>;
- };
-
- dpmac13: dpmac@d {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xd>;
- };
-
- dpmac14: dpmac@e {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xe>;
- };
-
- dpmac15: dpmac@f {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xf>;
- };
-
- dpmac16: dpmac@10 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x10>;
- };
- };
- };
-
- smmu: iommu@5000000 {
- compatible = "arm,mmu-500";
- reg = <0 0x5000000 0 0x800000>;
- #global-interrupts = <12>;
- interrupts = <0 13 4>, /* global secure fault */
- <0 14 4>, /* combined secure interrupt */
- <0 15 4>, /* global non-secure fault */
- <0 16 4>, /* combined non-secure interrupt */
- /* performance counter interrupts 0-7 */
- <0 211 4>, <0 212 4>,
- <0 213 4>, <0 214 4>,
- <0 215 4>, <0 216 4>,
- <0 217 4>, <0 218 4>,
- /* per context interrupt, 64 interrupts */
- <0 146 4>, <0 147 4>,
- <0 148 4>, <0 149 4>,
- <0 150 4>, <0 151 4>,
- <0 152 4>, <0 153 4>,
- <0 154 4>, <0 155 4>,
- <0 156 4>, <0 157 4>,
- <0 158 4>, <0 159 4>,
- <0 160 4>, <0 161 4>,
- <0 162 4>, <0 163 4>,
- <0 164 4>, <0 165 4>,
- <0 166 4>, <0 167 4>,
- <0 168 4>, <0 169 4>,
- <0 170 4>, <0 171 4>,
- <0 172 4>, <0 173 4>,
- <0 174 4>, <0 175 4>,
- <0 176 4>, <0 177 4>,
- <0 178 4>, <0 179 4>,
- <0 180 4>, <0 181 4>,
- <0 182 4>, <0 183 4>,
- <0 184 4>, <0 185 4>,
- <0 186 4>, <0 187 4>,
- <0 188 4>, <0 189 4>,
- <0 190 4>, <0 191 4>,
- <0 192 4>, <0 193 4>,
- <0 194 4>, <0 195 4>,
- <0 196 4>, <0 197 4>,
- <0 198 4>, <0 199 4>,
- <0 200 4>, <0 201 4>,
- <0 202 4>, <0 203 4>,
- <0 204 4>, <0 205 4>,
- <0 206 4>, <0 207 4>,
- <0 208 4>, <0 209 4>;
- mmu-masters = <&fsl_mc 0x300 0>;
- };
-
- dspi: dspi@2100000 {
- status = "disabled";
- compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2100000 0x0 0x10000>;
- interrupts = <0 26 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
- clock-names = "dspi";
- spi-num-chipselects = <5>;
- bus-num = <0>;
- };
-
- esdhc: esdhc@2140000 {
- status = "disabled";
- compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
- reg = <0x0 0x2140000 0x0 0x10000>;
- interrupts = <0 28 0x4>; /* Level high type */
- clock-frequency = <0>; /* Updated by bootloader */
- voltage-ranges = <1800 1800 3300 3300>;
- sdhci,auto-cmd12;
- little-endian;
- bus-width = <4>;
- };
-
- gpio0: gpio@2300000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2300000 0x0 0x10000>;
- interrupts = <0 36 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio@2310000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2310000 0x0 0x10000>;
- interrupts = <0 36 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@2320000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2320000 0x0 0x10000>;
- interrupts = <0 37 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@2330000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2330000 0x0 0x10000>;
- interrupts = <0 37 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- i2c0: i2c@2000000 {
- status = "disabled";
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2000000 0x0 0x10000>;
- interrupts = <0 34 0x4>; /* Level high type */
- clock-names = "i2c";
- clocks = <&clockgen 4 3>;
- };
-
- i2c1: i2c@2010000 {
- status = "disabled";
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2010000 0x0 0x10000>;
- interrupts = <0 34 0x4>; /* Level high type */
- clock-names = "i2c";
- clocks = <&clockgen 4 3>;
- };
-
- i2c2: i2c@2020000 {
- status = "disabled";
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2020000 0x0 0x10000>;
- interrupts = <0 35 0x4>; /* Level high type */
- clock-names = "i2c";
- clocks = <&clockgen 4 3>;
- };
-
- i2c3: i2c@2030000 {
- status = "disabled";
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2030000 0x0 0x10000>;
- interrupts = <0 35 0x4>; /* Level high type */
- clock-names = "i2c";
- clocks = <&clockgen 4 3>;
- };
-
- ifc: ifc@2240000 {
- compatible = "fsl,ifc", "simple-bus";
- reg = <0x0 0x2240000 0x0 0x20000>;
- interrupts = <0 21 0x4>; /* Level high type */
- little-endian;
- #address-cells = <2>;
- #size-cells = <1>;
-
- ranges = <0 0 0x5 0x80000000 0x08000000
- 2 0 0x5 0x30000000 0x00010000
- 3 0 0x5 0x20000000 0x00010000>;
- };
-
- qspi: quadspi@20c0000 {
- status = "disabled";
- compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x20c0000 0x0 0x10000>,
- <0x0 0x20000000 0x0 0x10000000>;
- reg-names = "QuadSPI", "QuadSPI-memory";
- interrupts = <0 25 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "qspi_en", "qspi";
- };
-
- pcie@3400000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
- "snps,dw-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 108 0x4>; /* Level high type */
- interrupt-names = "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
- <0000 0 0 2 &gic 0 0 0 110 4>,
- <0000 0 0 3 &gic 0 0 0 111 4>,
- <0000 0 0 4 &gic 0 0 0 112 4>;
- };
-
- pcie@3500000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
- "snps,dw-pcie";
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x12 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 113 0x4>; /* Level high type */
- interrupt-names = "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
- <0000 0 0 2 &gic 0 0 0 115 4>,
- <0000 0 0 3 &gic 0 0 0 116 4>,
- <0000 0 0 4 &gic 0 0 0 117 4>;
- };
-
- pcie@3600000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
- "snps,dw-pcie";
- reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
- 0x14 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 118 0x4>; /* Level high type */
- interrupt-names = "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-lanes = <8>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
- <0000 0 0 2 &gic 0 0 0 120 4>,
- <0000 0 0 3 &gic 0 0 0 121 4>,
- <0000 0 0 4 &gic 0 0 0 122 4>;
- };
-
- pcie@3700000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
- "snps,dw-pcie";
- reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
- 0x16 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 123 0x4>; /* Level high type */
- interrupt-names = "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
- <0000 0 0 2 &gic 0 0 0 125 4>,
- <0000 0 0 3 &gic 0 0 0 126 4>,
- <0000 0 0 4 &gic 0 0 0 127 4>;
- };
-
- sata0: sata@3200000 {
- status = "disabled";
- compatible = "fsl,ls2080a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
- interrupts = <0 133 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
- dma-coherent;
- };
-
- sata1: sata@3210000 {
- status = "disabled";
- compatible = "fsl,ls2080a-ahci";
- reg = <0x0 0x3210000 0x0 0x10000>;
- interrupts = <0 136 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
- dma-coherent;
- };
-
- usb0: usb3@3100000 {
- status = "disabled";
- compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <0 80 0x4>; /* Level high type */
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- };
-
- usb1: usb3@3110000 {
- status = "disabled";
- compatible = "snps,dwc3";
- reg = <0x0 0x3110000 0x0 0x10000>;
- interrupts = <0 81 0x4>; /* Level high type */
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- };
-
- ccn@4000000 {
- compatible = "arm,ccn-504";
- reg = <0x0 0x04000000 0x0 0x01000000>;
- interrupts = <0 12 4>;
- };
+ cluster0_l2: l2-cache0 {
+ compatible = "cache";
};
- ddr1: memory-controller@1080000 {
- compatible = "fsl,qoriq-memory-controller";
- reg = <0x0 0x1080000 0x0 0x1000>;
- interrupts = <0 17 0x4>;
- little-endian;
+ cluster1_l2: l2-cache1 {
+ compatible = "cache";
};
- ddr2: memory-controller@1090000 {
- compatible = "fsl,qoriq-memory-controller";
- reg = <0x0 0x1090000 0x0 0x1000>;
- interrupts = <0 18 0x4>;
- little-endian;
+ cluster2_l2: l2-cache2 {
+ compatible = "cache";
};
+
+ cluster3_l2: l2-cache3 {
+ compatible = "cache";
+ };
+};
+
+&pcie1 {
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie2 {
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie3 {
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie4 {
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
new file mode 100644
index 0000000..ebcd6ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -0,0 +1,64 @@
+/*
+ * Device Tree file for Freescale LS2088A QDS Board.
+ *
+ * Copyright (C) 2016-17, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2088A QDS Board";
+ compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
new file mode 100644
index 0000000..5992dc1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -0,0 +1,64 @@
+/*
+ * Device Tree file for Freescale LS2088A RDB Board.
+ *
+ * Copyright (C) 2016-17, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2088A RDB Board";
+ compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
new file mode 100644
index 0000000..33ce404
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -0,0 +1,165 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
+ *
+ * Copyright (C) 2016-17, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x100>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x101>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ };
+
+ cpu4: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x200>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x201>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ };
+
+ cpu6: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x300>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x301>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
+ };
+
+ cluster0_l2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ cluster1_l2: l2-cache1 {
+ compatible = "cache";
+ };
+
+ cluster2_l2: l2-cache2 {
+ compatible = "cache";
+ };
+
+ cluster3_l2: l2-cache3 {
+ compatible = "cache";
+ };
+};
+
+&pcie1 {
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>;
+};
+
+&pcie2 {
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>;
+};
+
+&pcie3 {
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>;
+};
+
+&pcie4 {
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
new file mode 100644
index 0000000..8b62048
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Device Tree file for Freescale LS2080A QDS Board.
+ *
+ * Copyright (C) 2016-17, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+ 0x2 0x0 0x5 0x30000000 0x00010000
+ 0x3 0x0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ cpld@3,0 {
+ reg = <0x3 0x0 0x10000>;
+ compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+ dflash1: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <1>;
+ };
+ dflash2: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <2>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash0: s25fl256s1@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+ flash2: s25fl256s1@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
new file mode 100644
index 0000000..3737587
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Device Tree file for Freescale LS2080A RDB Board.
+ *
+ * Copyright (C) 2016-17, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+ 0x2 0x0 0x5 0x30000000 0x00010000
+ 0x3 0x0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ cpld@3,0 {
+ reg = <0x3 0x0 0x10000>;
+ compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+ };
+
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@75 {
+ compatible = "nxp,pca9547";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q512a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+};
+
+&qspi {
+ status = "disabled";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
new file mode 100644
index 0000000..abb2fff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -0,0 +1,737 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright (C) 2016-2017, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "fsl,ls2080a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpu: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ /* DRAM space - 1, size : 2 GB DRAM */
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ gic: interrupt-controller@6000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ interrupts = <1 9 0x4>;
+
+ its: gic-its@6020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x6020000 0 0x20000>;
+ };
+ };
+
+ rstcr: syscon@1e60000 {
+ compatible = "fsl,ls2080a-rstcr", "syscon";
+ reg = <0x0 0x1e60000 0x0 0x4>;
+ };
+
+ reboot {
+ compatible ="syscon-reboot";
+ regmap = <&rstcr>;
+ offset = <0x0>;
+ mask = <0x2>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+ <1 14 4>, /* Physical Non-Secure PPI, active-low */
+ <1 11 4>, /* Virtual PPI, active-low */
+ <1 10 4>; /* Hypervisor PPI, active-low */
+ fsl,erratum-a008585;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clockgen: clocking@1300000 {
+ compatible = "fsl,ls2080a-clockgen";
+ reg = <0 0x1300000 0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ dcfg: dcfg@1e00000 {
+ compatible = "fsl,ls2080a-dcfg", "syscon";
+ reg = <0x0 0x1e00000 0x0 0x10000>;
+ little-endian;
+ };
+
+ tmu: tmu@1f80000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f80000 0x0 0x10000>;
+ interrupts = <0 23 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration = <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ little-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 4>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu2 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map3 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu6 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ serial0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 0x4>; /* Level high type */
+ };
+
+ serial1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 0x4>; /* Level high type */
+ };
+
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core1_watchdog: wdt@c010000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core0_watchdog: wdt@c100000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc100000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core1_watchdog: wdt@c110000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc110000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster3_core0_watchdog: wdt@c200000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc200000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster3_core1_watchdog: wdt@c210000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc210000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster4_core0_watchdog: wdt@c300000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc300000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster4_core1_watchdog: wdt@c310000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc310000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ msi-parent = <&its>;
+ #address-cells = <3>;
+ #size-cells = <1>;
+
+ /*
+ * Region type 0x0 - MC portals
+ * Region type 0x1 - QBMAN portals
+ */
+ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+ /*
+ * Define the maximum number of MACs present on the SoC.
+ */
+ dpmacs {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpmac1: dpmac@1 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x1>;
+ };
+
+ dpmac2: dpmac@2 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x2>;
+ };
+
+ dpmac3: dpmac@3 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x3>;
+ };
+
+ dpmac4: dpmac@4 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x4>;
+ };
+
+ dpmac5: dpmac@5 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x5>;
+ };
+
+ dpmac6: dpmac@6 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x6>;
+ };
+
+ dpmac7: dpmac@7 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x7>;
+ };
+
+ dpmac8: dpmac@8 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x8>;
+ };
+
+ dpmac9: dpmac@9 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x9>;
+ };
+
+ dpmac10: dpmac@a {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xa>;
+ };
+
+ dpmac11: dpmac@b {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xb>;
+ };
+
+ dpmac12: dpmac@c {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xc>;
+ };
+
+ dpmac13: dpmac@d {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xd>;
+ };
+
+ dpmac14: dpmac@e {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xe>;
+ };
+
+ dpmac15: dpmac@f {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xf>;
+ };
+
+ dpmac16: dpmac@10 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x10>;
+ };
+ };
+ };
+
+ smmu: iommu@5000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x5000000 0 0x800000>;
+ #global-interrupts = <12>;
+ interrupts = <0 13 4>, /* global secure fault */
+ <0 14 4>, /* combined secure interrupt */
+ <0 15 4>, /* global non-secure fault */
+ <0 16 4>, /* combined non-secure interrupt */
+ /* performance counter interrupts 0-7 */
+ <0 211 4>, <0 212 4>,
+ <0 213 4>, <0 214 4>,
+ <0 215 4>, <0 216 4>,
+ <0 217 4>, <0 218 4>,
+ /* per context interrupt, 64 interrupts */
+ <0 146 4>, <0 147 4>,
+ <0 148 4>, <0 149 4>,
+ <0 150 4>, <0 151 4>,
+ <0 152 4>, <0 153 4>,
+ <0 154 4>, <0 155 4>,
+ <0 156 4>, <0 157 4>,
+ <0 158 4>, <0 159 4>,
+ <0 160 4>, <0 161 4>,
+ <0 162 4>, <0 163 4>,
+ <0 164 4>, <0 165 4>,
+ <0 166 4>, <0 167 4>,
+ <0 168 4>, <0 169 4>,
+ <0 170 4>, <0 171 4>,
+ <0 172 4>, <0 173 4>,
+ <0 174 4>, <0 175 4>,
+ <0 176 4>, <0 177 4>,
+ <0 178 4>, <0 179 4>,
+ <0 180 4>, <0 181 4>,
+ <0 182 4>, <0 183 4>,
+ <0 184 4>, <0 185 4>,
+ <0 186 4>, <0 187 4>,
+ <0 188 4>, <0 189 4>,
+ <0 190 4>, <0 191 4>,
+ <0 192 4>, <0 193 4>,
+ <0 194 4>, <0 195 4>,
+ <0 196 4>, <0 197 4>,
+ <0 198 4>, <0 199 4>,
+ <0 200 4>, <0 201 4>,
+ <0 202 4>, <0 203 4>,
+ <0 204 4>, <0 205 4>,
+ <0 206 4>, <0 207 4>,
+ <0 208 4>, <0 209 4>;
+ mmu-masters = <&fsl_mc 0x300 0>;
+ };
+
+ dspi: dspi@2100000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <0 26 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <0>;
+ };
+
+ esdhc: esdhc@2140000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clock-frequency = <0>; /* Updated by bootloader */
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ };
+
+ gpio0: gpio@2300000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2310000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2320000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@2330000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c0: i2c@2000000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c1: i2c@2010000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c2: i2c@2020000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c3: i2c@2030000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ ifc: ifc@2240000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x2240000 0x0 0x20000>;
+ interrupts = <0 21 0x4>; /* Level high type */
+ little-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ };
+
+ qspi: quadspi@20c0000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "qspi_en", "qspi";
+ };
+
+ pcie1: pcie@3400000 {
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
+ reg-names = "regs", "config";
+ interrupts = <0 108 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+ <0000 0 0 2 &gic 0 0 0 110 4>,
+ <0000 0 0 3 &gic 0 0 0 111 4>,
+ <0000 0 0 4 &gic 0 0 0 112 4>;
+ };
+
+ pcie2: pcie@3500000 {
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
+ reg-names = "regs", "config";
+ interrupts = <0 113 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+ <0000 0 0 2 &gic 0 0 0 115 4>,
+ <0000 0 0 3 &gic 0 0 0 116 4>,
+ <0000 0 0 4 &gic 0 0 0 117 4>;
+ };
+
+ pcie3: pcie@3600000 {
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
+ reg-names = "regs", "config";
+ interrupts = <0 118 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <8>;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+ <0000 0 0 2 &gic 0 0 0 120 4>,
+ <0000 0 0 3 &gic 0 0 0 121 4>,
+ <0000 0 0 4 &gic 0 0 0 122 4>;
+ };
+
+ pcie4: pcie@3700000 {
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
+ reg-names = "regs", "config";
+ interrupts = <0 123 0x4>; /* Level high type */
+ interrupt-names = "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+ <0000 0 0 2 &gic 0 0 0 125 4>,
+ <0000 0 0 3 &gic 0 0 0 126 4>,
+ <0000 0 0 4 &gic 0 0 0 127 4>;
+ };
+
+ sata0: sata@3200000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>;
+ interrupts = <0 133 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ };
+
+ sata1: sata@3210000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-ahci";
+ reg = <0x0 0x3210000 0x0 0x10000>;
+ interrupts = <0 136 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ };
+
+ usb0: usb3@3100000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ usb1: usb3@3110000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ ccn@4000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x0 0x04000000 0x0 0x01000000>;
+ interrupts = <0 12 4>;
+ };
+ };
+
+ ddr1: memory-controller@1080000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1080000 0x0 0x1000>;
+ interrupts = <0 17 0x4>;
+ little-endian;
+ };
+
+ ddr2: memory-controller@1090000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1090000 0x0 0x1000>;
+ interrupts = <0 18 0x4>;
+ little-endian;
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index c3a6c19..8960eca 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index ff37f0a..186251f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "hi3660.dtsi"
+#include "hikey960-pinctrl.dtsi"
/ {
model = "HiKey960";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
new file mode 100644
index 0000000..b914287
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -0,0 +1,162 @@
+/*
+ * DTS File for HiSilicon Poplar Development Board
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hi3798cv200.dtsi"
+
+/ {
+ model = "HiSilicon Poplar Development Board";
+ compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
+
+ aliases {
+ serial0 = &uart0;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user-led0 {
+ label = "USER-LED0";
+ gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ user-led1 {
+ label = "USER-LED1";
+ gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ user-led2 {
+ label = "USER-LED2";
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+
+ user-led3 {
+ label = "USER-LED3";
+ gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <ð_phy1>;
+ phy-mode = "rgmii";
+ hisilicon,phy-reset-delays-us = <10000 10000 30000>;
+
+ eth_phy1: phy@3 {
+ reg = <3>;
+ };
+};
+
+&gpio1 {
+ status = "okay";
+ gpio-line-names = "LS-GPIO-E", "",
+ "", "",
+ "", "LS-GPIO-F",
+ "", "LS-GPIO-J";
+};
+
+&gpio2 {
+ status = "okay";
+ gpio-line-names = "LS-GPIO-H", "LS-GPIO-I",
+ "LS-GPIO-L", "LS-GPIO-G",
+ "LS-GPIO-K", "",
+ "", "";
+};
+
+&gpio3 {
+ status = "okay";
+ gpio-line-names = "", "",
+ "", "",
+ "LS-GPIO-C", "",
+ "", "LS-GPIO-B";
+};
+
+&gpio4 {
+ status = "okay";
+ gpio-line-names = "", "",
+ "", "",
+ "", "LS-GPIO-D",
+ "", "";
+};
+
+&gpio5 {
+ status = "okay";
+ gpio-line-names = "", "USER-LED-1",
+ "USER-LED-2", "",
+ "", "LS-GPIO-A",
+ "", "";
+};
+
+&gpio6 {
+ status = "okay";
+ gpio-line-names = "", "",
+ "", "USER-LED-0",
+ "", "",
+ "", "";
+};
+
+&gpio10 {
+ status = "okay";
+ gpio-line-names = "", "",
+ "", "",
+ "", "",
+ "USER-LED-3", "";
+};
+
+&i2c0 {
+ status = "okay";
+ label = "LS-I2C0";
+};
+
+&i2c2 {
+ status = "okay";
+ label = "LS-I2C1";
+};
+
+&ir {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ label = "LS-SPI0";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+ label = "LS-UART0";
+};
+/* No optional LS-UART1 on Low Speed Expansion Connector. */
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
new file mode 100644
index 0000000..75865f8a
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -0,0 +1,411 @@
+/*
+ * DTS File for HiSilicon Hi3798cv200 SoC.
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <dt-bindings/clock/histb-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+ compatible = "hisilicon,hi3798cv200";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */
+ <0x0 0xf1002000 0x0 0x100>; /* GICC */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc: soc@f0000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xf0000000 0x10000000>;
+
+ crg: clock-reset-controller@8a22000 {
+ compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
+ reg = <0x8a22000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+
+ gmacphyrst: reset-controller {
+ compatible = "ti,syscon-reset";
+ #reset-cells = <1>;
+ ti,reset-bits =
+ <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
+ DEASSERT_SET|STATUS_NONE)>,
+ <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
+ DEASSERT_SET|STATUS_NONE)>;
+ };
+ };
+
+ sysctrl: system-controller@8000000 {
+ compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
+ reg = <0x8000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+ };
+
+ uart0: serial@8b00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x8b00000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysctrl HISTB_UART0_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: serial@8b02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x8b02000 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_UART2_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ i2c0: i2c@8b10000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b10000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C0_CLK>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@8b11000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b11000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C1_CLK>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@8b12000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b12000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C2_CLK>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@8b13000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b13000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C3_CLK>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@8b14000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b14000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C4_CLK>;
+ status = "disabled";
+ };
+
+ spi0: spi@8b1a000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x8b1a000 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ cs-gpios = <&gpio7 1 0>;
+ clocks = <&crg HISTB_SPI0_CLK>;
+ clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ emmc: mmc@9830000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x9830000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_MMC_CIU_CLK>,
+ <&crg HISTB_MMC_BIU_CLK>;
+ clock-names = "ciu", "biu";
+ };
+
+ gpio0: gpio@8b20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b20000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio1: gpio@8b21000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b21000 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio2: gpio@8b22000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b22000 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio3: gpio@8b23000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b23000 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio4: gpio@8b24000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b24000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio5: gpio@8004000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8004000 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio6: gpio@8b26000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b26000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio7: gpio@8b27000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b27000 0x1000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio8: gpio@8b28000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b28000 0x1000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio9: gpio@8b29000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b29000 0x1000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio10: gpio@8b2a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b2a000 0x1000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio11: gpio@8b2b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b2b000 0x1000>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio12: gpio@8b2c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b2c000 0x1000>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gmac0: ethernet@9840000 {
+ compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+ reg = <0x9840000 0x1000>,
+ <0x984300c 0x4>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_ETH0_MAC_CLK>,
+ <&crg HISTB_ETH0_MACIF_CLK>;
+ clock-names = "mac_core", "mac_ifc";
+ resets = <&crg 0xcc 8>,
+ <&crg 0xcc 10>,
+ <&gmacphyrst 0>;
+ reset-names = "mac_core", "mac_ifc", "phy";
+ status = "disabled";
+ };
+
+ gmac1: ethernet@9841000 {
+ compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+ reg = <0x9841000 0x1000>,
+ <0x9843010 0x4>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_ETH1_MAC_CLK>,
+ <&crg HISTB_ETH1_MACIF_CLK>;
+ clock-names = "mac_core", "mac_ifc";
+ resets = <&crg 0xcc 9>,
+ <&crg 0xcc 11>,
+ <&gmacphyrst 1>;
+ reset-names = "mac_core", "mac_ifc", "phy";
+ status = "disabled";
+ };
+
+ ir: ir@8001000 {
+ compatible = "hisilicon,hix5hd2-ir";
+ reg = <0x8001000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysctrl HISTB_IR_CLK>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 470461d..1e5129b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -774,6 +774,7 @@
clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
clock-names = "ciu", "biu";
resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
+ reset-names = "reset";
bus-width = <0x8>;
vmmc-supply = <&ldo19>;
pinctrl-names = "default";
@@ -797,6 +798,7 @@
clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
clock-names = "ciu", "biu";
resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
+ reset-names = "reset";
vqmmc-supply = <&ldo7>;
vmmc-supply = <&ldo10>;
bus-width = <0x4>;
@@ -815,6 +817,7 @@
clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
clock-names = "ciu", "biu";
resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
+ reset-names = "reset";
bus-width = <0x4>;
broken-cd;
pinctrl-names = "default", "idle";
diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
new file mode 100644
index 0000000..719c4bc
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
@@ -0,0 +1,407 @@
+/*
+ * pinctrl dts fils for Hislicon HiKey960 development board
+ *
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+ soc {
+ /* [IOMG_000, IOMG_123] */
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+
+ pmx0: pinmux@e896c000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xe896c000 0x0 0x1f0>;
+ #pinctrl-cells = <1>;
+ #gpio-range-cells = <0x3>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <
+ &range 0 7 0
+ &range 8 116 0>;
+
+ isp0_pmx_func: isp0_pmx_func {
+ pinctrl-single,pins = <
+ 0x058 MUX_M1 /* ISP_CLK0 */
+ 0x064 MUX_M1 /* ISP_SCL0 */
+ 0x068 MUX_M1 /* ISP_SDA0 */
+ >;
+ };
+
+ isp1_pmx_func: isp1_pmx_func {
+ pinctrl-single,pins = <
+ 0x05c MUX_M1 /* ISP_CLK1 */
+ 0x06c MUX_M1 /* ISP_SCL1 */
+ 0x070 MUX_M1 /* ISP_SDA1 */
+ >;
+ };
+
+ i2c3_pmx_func: i2c3_pmx_func {
+ pinctrl-single,pins = <
+ 0x02c MUX_M1 /* I2C3_SCL */
+ 0x030 MUX_M1 /* I2C3_SDA */
+ >;
+ };
+
+ i2c4_pmx_func: i2c4_pmx_func {
+ pinctrl-single,pins = <
+ 0x090 MUX_M1 /* I2C4_SCL */
+ 0x094 MUX_M1 /* I2C4_SDA */
+ >;
+ };
+
+ pcie_perstn_pmx_func: pcie_perstn_pmx_func {
+ pinctrl-single,pins = <
+ 0x15c MUX_M1 /* PCIE_PERST_N */
+ >;
+ };
+
+ usbhub5734_pmx_func: usbhub5734_pmx_func {
+ pinctrl-single,pins = <
+ 0x11c MUX_M0 /* GPIO_073 */
+ 0x120 MUX_M0 /* GPIO_074 */
+ >;
+ };
+
+ spi1_pmx_func: spi1_pmx_func {
+ pinctrl-single,pins = <
+ 0x034 MUX_M1 /* SPI1_CLK */
+ 0x038 MUX_M1 /* SPI1_DI */
+ 0x03c MUX_M1 /* SPI1_DO */
+ 0x040 MUX_M1 /* SPI1_CS_N */
+ >;
+ };
+
+ uart0_pmx_func: uart0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0cc MUX_M2 /* UART0_RXD */
+ 0x0d0 MUX_M2 /* UART0_TXD */
+ 0x0d4 MUX_M2 /* UART0_RXD_M */
+ 0x0d8 MUX_M2 /* UART0_TXD_M */
+ >;
+ };
+
+ uart1_pmx_func: uart1_pmx_func {
+ pinctrl-single,pins = <
+ 0x0b0 MUX_M2 /* UART1_CTS_N */
+ 0x0b4 MUX_M2 /* UART1_RTS_N */
+ 0x0a8 MUX_M2 /* UART1_RXD */
+ 0x0ac MUX_M2 /* UART1_TXD */
+ >;
+ };
+
+ uart2_pmx_func: uart2_pmx_func {
+ pinctrl-single,pins = <
+ 0x0bc MUX_M2 /* UART2_CTS_N */
+ 0x0c0 MUX_M2 /* UART2_RTS_N */
+ 0x0c8 MUX_M2 /* UART2_RXD */
+ 0x0c4 MUX_M2 /* UART2_TXD */
+ >;
+ };
+
+ uart3_pmx_func: uart3_pmx_func {
+ pinctrl-single,pins = <
+ 0x0dc MUX_M1 /* UART3_CTS_N */
+ 0x0e0 MUX_M1 /* UART3_RTS_N */
+ 0x0e4 MUX_M1 /* UART3_RXD */
+ 0x0e8 MUX_M1 /* UART3_TXD */
+ >;
+ };
+
+ uart4_pmx_func: uart4_pmx_func {
+ pinctrl-single,pins = <
+ 0x0ec MUX_M1 /* UART4_CTS_N */
+ 0x0f0 MUX_M1 /* UART4_RTS_N */
+ 0x0f4 MUX_M1 /* UART4_RXD */
+ 0x0f8 MUX_M1 /* UART4_TXD */
+ >;
+ };
+
+ uart5_pmx_func: uart5_pmx_func {
+ pinctrl-single,pins = <
+ 0x0c4 MUX_M3 /* UART5_CTS_N */
+ 0x0c8 MUX_M3 /* UART5_RTS_N */
+ 0x0bc MUX_M3 /* UART5_RXD */
+ 0x0c0 MUX_M3 /* UART5_TXD */
+ >;
+ };
+
+ uart6_pmx_func: uart6_pmx_func {
+ pinctrl-single,pins = <
+ 0x0cc MUX_M1 /* UART6_CTS_N */
+ 0x0d0 MUX_M1 /* UART6_RTS_N */
+ 0x0d4 MUX_M1 /* UART6_RXD */
+ 0x0d8 MUX_M1 /* UART6_TXD */
+ >;
+ };
+ };
+
+ /* [IOMG_MMC0_000, IOMG_MMC0_005] */
+ pmx1: pinmux@ff37e000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xff37e000 0x0 0x18>;
+ #gpio-range-cells = <0x3>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 6 0>;
+
+ sd_pmx_func: sd_pmx_func {
+ pinctrl-single,pins = <
+ 0x000 MUX_M1 /* SD_CLK */
+ 0x004 MUX_M1 /* SD_CMD */
+ 0x008 MUX_M1 /* SD_DATA0 */
+ 0x00c MUX_M1 /* SD_DATA1 */
+ 0x010 MUX_M1 /* SD_DATA2 */
+ 0x014 MUX_M1 /* SD_DATA3 */
+ >;
+ };
+ };
+
+ /* [IOMG_FIX_000, IOMG_FIX_011] */
+ pmx2: pinmux@ff3b6000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xff3b6000 0x0 0x30>;
+ #pinctrl-cells = <1>;
+ #gpio-range-cells = <0x3>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 12 0>;
+
+ spi3_pmx_func: spi3_pmx_func {
+ pinctrl-single,pins = <
+ 0x008 MUX_M1 /* SPI3_CLK */
+ 0x00c MUX_M1 /* SPI3_DI */
+ 0x010 MUX_M1 /* SPI3_DO */
+ 0x014 MUX_M1 /* SPI3_CS0_N */
+ >;
+ };
+ };
+
+ /* [IOMG_MMC1_000, IOMG_MMC1_005] */
+ pmx3: pinmux@ff3fd000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xff3fd000 0x0 0x18>;
+ #pinctrl-cells = <1>;
+ #gpio-range-cells = <0x3>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 6 0>;
+
+ sdio_pmx_func: sdio_pmx_func {
+ pinctrl-single,pins = <
+ 0x000 MUX_M1 /* SDIO_CLK */
+ 0x004 MUX_M1 /* SDIO_CMD */
+ 0x008 MUX_M1 /* SDIO_DATA0 */
+ 0x00c MUX_M1 /* SDIO_DATA1 */
+ 0x010 MUX_M1 /* SDIO_DATA2 */
+ 0x014 MUX_M1 /* SDIO_DATA3 */
+ >;
+ };
+ };
+
+ /* [IOMG_AO_000, IOMG_AO_041] */
+ pmx4: pinmux@fff11000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0xfff11000 0x0 0xa8>;
+ #pinctrl-cells = <1>;
+ #gpio-range-cells = <0x3>;
+ pinctrl-single,register-width = <0x20>;
+ pinctrl-single,function-mask = <0x7>;
+ /* pin base in node, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 42 0>;
+
+ i2s2_pmx_func: i2s2_pmx_func {
+ pinctrl-single,pins = <
+ 0x044 MUX_M1 /* I2S2_DI */
+ 0x048 MUX_M1 /* I2S2_DO */
+ 0x04c MUX_M1 /* I2S2_XCLK */
+ 0x050 MUX_M1 /* I2S2_XFS */
+ >;
+ };
+
+ slimbus_pmx_func: slimbus_pmx_func {
+ pinctrl-single,pins = <
+ 0x02c MUX_M1 /* SLIMBUS_CLK */
+ 0x030 MUX_M1 /* SLIMBUS_DATA */
+ >;
+ };
+
+ i2c0_pmx_func: i2c0_pmx_func {
+ pinctrl-single,pins = <
+ 0x014 MUX_M1 /* I2C0_SCL */
+ 0x018 MUX_M1 /* I2C0_SDA */
+ >;
+ };
+
+ i2c1_pmx_func: i2c1_pmx_func {
+ pinctrl-single,pins = <
+ 0x01c MUX_M1 /* I2C1_SCL */
+ 0x020 MUX_M1 /* I2C1_SDA */
+ >;
+ };
+
+ i2c2_pmx_func: i2c2_pmx_func {
+ pinctrl-single,pins = <
+ 0x024 MUX_M1 /* I2C2_SCL */
+ 0x028 MUX_M1 /* I2C2_SDA */
+ >;
+ };
+
+ i2c7_pmx_func: i2c7_pmx_func {
+ pinctrl-single,pins = <
+ 0x024 MUX_M3 /* I2C7_SCL */
+ 0x028 MUX_M3 /* I2C7_SDA */
+ >;
+ };
+
+ spi2_pmx_func: spi2_pmx_func {
+ pinctrl-single,pins = <
+ 0x08c MUX_M1 /* SPI2_CLK */
+ 0x090 MUX_M1 /* SPI2_DI */
+ 0x094 MUX_M1 /* SPI2_DO */
+ 0x098 MUX_M1 /* SPI2_CS0_N */
+ >;
+ };
+
+ spi4_pmx_func: spi4_pmx_func {
+ pinctrl-single,pins = <
+ 0x08c MUX_M4 /* SPI4_CLK */
+ 0x090 MUX_M4 /* SPI4_DI */
+ 0x094 MUX_M4 /* SPI4_DO */
+ 0x098 MUX_M4 /* SPI4_CS0_N */
+ >;
+ };
+
+ i2s0_pmx_func: i2s0_pmx_func {
+ pinctrl-single,pins = <
+ 0x034 MUX_M1 /* I2S0_DI */
+ 0x038 MUX_M1 /* I2S0_DO */
+ 0x03c MUX_M1 /* I2S0_XCLK */
+ 0x040 MUX_M1 /* I2S0_XFS */
+ >;
+ };
+ };
+
+ pmx5: pinmux@ff3fd800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xff3fd800 0x0 0x18>;
+ #pinctrl-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-single,register-width = <32>;
+
+ sdio_clk_cfg_func: sdio_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* SDIO_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_32MA
+ DRIVE6_MASK
+ >;
+ };
+
+ sdio_cfg_func: sdio_cfg_func {
+ pinctrl-single,pins = <
+ 0x004 0x0 /* SDIO_CMD */
+ 0x008 0x0 /* SDIO_DATA0 */
+ 0x00c 0x0 /* SDIO_DATA1 */
+ 0x010 0x0 /* SDIO_DATA2 */
+ 0x014 0x0 /* SDIO_DATA3 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_19MA
+ DRIVE6_MASK
+ >;
+ };
+ };
+
+ pmx6: pinmux@ff37e800 {
+ compatible = "pinconf-single";
+ reg = <0x0 0xff37e800 0x0 0x18>;
+ #pinctrl-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-single,register-width = <32>;
+
+ sd_clk_cfg_func: sd_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* SD_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_32MA
+ DRIVE6_MASK
+ >;
+ };
+
+ sd_cfg_func: sd_cfg_func {
+ pinctrl-single,pins = <
+ 0x004 0x0 /* SD_CMD */
+ 0x008 0x0 /* SD_DATA0 */
+ 0x00c 0x0 /* SD_DATA1 */
+ 0x010 0x0 /* SD_DATA2 */
+ 0x014 0x0 /* SD_DATA3 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_19MA
+ DRIVE6_MASK
+ >;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
index e058442..f5d7f08 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -64,3 +64,23 @@
&usb_ehci {
status = "ok";
};
+
+ð0 {
+ status = "ok";
+};
+
+ð1 {
+ status = "ok";
+};
+
+ð2 {
+ status = "ok";
+};
+
+ð3 {
+ status = "ok";
+};
+
+&sas1 {
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 5144eb1..283d7b5 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -1014,6 +1014,34 @@
compatible = "hisilicon,mbigen-v2";
reg = <0x0 0xa0080000 0x0 0x10000>;
+ mbigen_pcie2_a: intc_pcie2_a {
+ msi-parent = <&p0_its_dsa_a 0x40087>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <10>;
+ };
+
+ mbigen_sas1: intc_sas1 {
+ msi-parent = <&p0_its_dsa_a 0x40000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <128>;
+ };
+
+ mbigen_sas2: intc_sas2 {
+ msi-parent = <&p0_its_dsa_a 0x40040>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <128>;
+ };
+
+ mbigen_smmu_pcie: intc_smmu_pcie {
+ msi-parent = <&p0_its_dsa_a 0x40b0c>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <3>;
+ };
+
mbigen_usb: intc_usb {
msi-parent = <&p0_its_dsa_a 0x40080>;
interrupt-controller;
@@ -1022,6 +1050,39 @@
};
};
+ p0_mbigen_dsa_a: interrupt-controller@c0080000 {
+ compatible = "hisilicon,mbigen-v2";
+ reg = <0x0 0xc0080000 0x0 0x10000>;
+
+ mbigen_dsaf0: intc_dsaf0 {
+ msi-parent = <&p0_its_dsa_a 0x40800>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <409>;
+ };
+
+ mbigen_dsa_roce: intc-roce {
+ msi-parent = <&p0_its_dsa_a 0x40B1E>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <34>;
+ };
+
+ mbigen_sas0: intc-sas0 {
+ msi-parent = <&p0_its_dsa_a 0x40900>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <128>;
+ };
+
+ mbigen_smmu_dsa: intc_smmu_dsa {
+ msi-parent = <&p0_its_dsa_a 0x40b20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ num-pins = <3>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -1055,5 +1116,423 @@
dma-coherent;
status = "disabled";
};
+
+ peri_c_subctrl: sub_ctrl_c@60000000 {
+ compatible = "hisilicon,peri-subctrl","syscon";
+ reg = <0 0x60000000 0x0 0x10000>;
+ };
+
+ dsa_subctrl: dsa_subctrl@c0000000 {
+ compatible = "hisilicon,dsa-subctrl", "syscon";
+ reg = <0x0 0xc0000000 0x0 0x10000>;
+ };
+
+ pcie_subctl: pcie_subctl@a0000000 {
+ compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+ reg = <0x0 0xa0000000 0x0 0x10000>;
+ };
+
+ serdes_ctrl: sds_ctrl@c2200000 {
+ compatible = "syscon";
+ reg = <0 0xc2200000 0x0 0x80000>;
+ };
+
+ mdio@603c0000 {
+ compatible = "hisilicon,hns-mdio";
+ reg = <0x0 0x603c0000 0x0 0x1000>;
+ subctrl-vbase = <&peri_c_subctrl 0x338 0xa38
+ 0x531c 0x5a1c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+
+ dsaf0: dsa@c7000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "hisilicon,hns-dsaf-v2";
+ mode = "6port-16rss";
+ reg = <0x0 0xc5000000 0x0 0x890000
+ 0x0 0xc7000000 0x0 0x600000>;
+ reg-names = "ppe-base", "dsaf-base";
+ interrupt-parent = <&mbigen_dsaf0>;
+ subctrl-syscon = <&dsa_subctrl>;
+ reset-field-offset = <0>;
+ interrupts =
+ <576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
+ <581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
+ <586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
+ <591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
+ <596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
+ <960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
+ <965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
+ <970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
+ <975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
+ <980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
+ <985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
+ <990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
+ <995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
+ <1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
+ <1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
+ <1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
+ <1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
+ <1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
+ <1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
+ <1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
+ <1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
+ <1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
+ <1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
+ <1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
+ <1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
+ <1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
+ <1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
+ <1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
+ <1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
+ <1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
+ <1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
+ <1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
+ <1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
+ <1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
+ <1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
+ <1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
+ <1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
+ <1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
+ <1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
+ <1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
+ <1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
+ <1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
+ <1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
+ <1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
+ <1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
+ <1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
+ <1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
+ <1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
+ <1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
+ <1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
+ <1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
+ <1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
+ <1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
+ <1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
+ <1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
+ <1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
+ <1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
+ <1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
+ <1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
+ <1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
+ <1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
+ <1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
+ <1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
+ <1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
+ <1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
+ <1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
+ <1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
+ <1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
+ <1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
+ <1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
+ <1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
+ <1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
+ <1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
+ <1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
+ <1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
+ <1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
+ <1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
+ <1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
+ <1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
+ <1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
+ <1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
+ <1340 1>, <1341 1>, <1342 1>, <1343 1>;
+
+ desc-num = <0x400>;
+ buf-size = <0x1000>;
+ dma-coherent;
+
+ port@0 {
+ reg = <0>;
+ serdes-syscon = <&serdes_ctrl>;
+ port-rst-offset = <0>;
+ port-mode-offset = <0>;
+ mc-mac-mask = [ff f0 00 00 00 00];
+ media-type = "fiber";
+ };
+
+ port@1 {
+ reg = <1>;
+ serdes-syscon= <&serdes_ctrl>;
+ port-rst-offset = <1>;
+ port-mode-offset = <1>;
+ mc-mac-mask = [ff f0 00 00 00 00];
+ media-type = "fiber";
+ };
+
+ port@4 {
+ reg = <4>;
+ phy-handle = <&phy0>;
+ serdes-syscon= <&serdes_ctrl>;
+ port-rst-offset = <4>;
+ port-mode-offset = <2>;
+ mc-mac-mask = [ff f0 00 00 00 00];
+ media-type = "copper";
+ };
+
+ port@5 {
+ reg = <5>;
+ phy-handle = <&phy1>;
+ serdes-syscon= <&serdes_ctrl>;
+ port-rst-offset = <5>;
+ port-mode-offset = <3>;
+ mc-mac-mask = [ff f0 00 00 00 00];
+ media-type = "copper";
+ };
+ };
+
+ eth0: ethernet@4{
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <4>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth1: ethernet@5{
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <5>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth2: ethernet@0{
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <0>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth3: ethernet@1{
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ infiniband@c4000000 {
+ compatible = "hisilicon,hns-roce-v1";
+ reg = <0x0 0xc4000000 0x0 0x100000>;
+ dma-coherent;
+ eth-handle = <ð2 ð3 0 0 ð0 ð1>;
+ dsaf-handle = <&dsaf0>;
+ node-guid = [00 9A CD 00 00 01 02 03];
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mbigen_dsa_roce>;
+ interrupts = <722 1>,
+ <723 1>,
+ <724 1>,
+ <725 1>,
+ <726 1>,
+ <727 1>,
+ <728 1>,
+ <729 1>,
+ <730 1>,
+ <731 1>,
+ <732 1>,
+ <733 1>,
+ <734 1>,
+ <735 1>,
+ <736 1>,
+ <737 1>,
+ <738 1>,
+ <739 1>,
+ <740 1>,
+ <741 1>,
+ <742 1>,
+ <743 1>,
+ <744 1>,
+ <745 1>,
+ <746 1>,
+ <747 1>,
+ <748 1>,
+ <749 1>,
+ <750 1>,
+ <751 1>,
+ <752 1>,
+ <753 1>,
+ <785 1>,
+ <754 4>;
+
+ interrupt-names = "hns-roce-comp-0",
+ "hns-roce-comp-1",
+ "hns-roce-comp-2",
+ "hns-roce-comp-3",
+ "hns-roce-comp-4",
+ "hns-roce-comp-5",
+ "hns-roce-comp-6",
+ "hns-roce-comp-7",
+ "hns-roce-comp-8",
+ "hns-roce-comp-9",
+ "hns-roce-comp-10",
+ "hns-roce-comp-11",
+ "hns-roce-comp-12",
+ "hns-roce-comp-13",
+ "hns-roce-comp-14",
+ "hns-roce-comp-15",
+ "hns-roce-comp-16",
+ "hns-roce-comp-17",
+ "hns-roce-comp-18",
+ "hns-roce-comp-19",
+ "hns-roce-comp-20",
+ "hns-roce-comp-21",
+ "hns-roce-comp-22",
+ "hns-roce-comp-23",
+ "hns-roce-comp-24",
+ "hns-roce-comp-25",
+ "hns-roce-comp-26",
+ "hns-roce-comp-27",
+ "hns-roce-comp-28",
+ "hns-roce-comp-29",
+ "hns-roce-comp-30",
+ "hns-roce-comp-31",
+ "hns-roce-async",
+ "hns-roce-common";
+ };
+
+ sas0: sas@c3000000 {
+ compatible = "hisilicon,hip07-sas-v2";
+ reg = <0 0xc3000000 0 0x10000>;
+ sas-addr = [50 01 88 20 16 00 00 00];
+ hisilicon,sas-syscon = <&dsa_subctrl>;
+ ctrl-reset-reg = <0xa60>;
+ ctrl-reset-sts-reg = <0x5a30>;
+ ctrl-clock-ena-reg = <0x338>;
+ queue-count = <16>;
+ phy-count = <8>;
+ dma-coherent;
+ interrupt-parent = <&mbigen_sas0>;
+ interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+ <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+ <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+ <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+ <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+ <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+ <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+ <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+ <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+ <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+ <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+ <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+ <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+ <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+ <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+ <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+ <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+ <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+ <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+ <159 4>,<601 1>,<602 1>,<603 1>,<604 1>,
+ <605 1>,<606 1>,<607 1>,<608 1>,<609 1>,
+ <610 1>,<611 1>,<612 1>,<613 1>,<614 1>,
+ <615 1>,<616 1>,<617 1>,<618 1>,<619 1>,
+ <620 1>,<621 1>,<622 1>,<623 1>,<624 1>,
+ <625 1>,<626 1>,<627 1>,<628 1>,<629 1>,
+ <630 1>,<631 1>,<632 1>;
+ status = "disabled";
+ };
+
+ sas1: sas@a2000000 {
+ compatible = "hisilicon,hip07-sas-v2";
+ reg = <0 0xa2000000 0 0x10000>;
+ sas-addr = [50 01 88 20 16 00 00 00];
+ hisilicon,sas-syscon = <&pcie_subctl>;
+ hip06-sas-v2-quirk-amt;
+ ctrl-reset-reg = <0xa18>;
+ ctrl-reset-sts-reg = <0x5a0c>;
+ ctrl-clock-ena-reg = <0x318>;
+ queue-count = <16>;
+ phy-count = <8>;
+ dma-coherent;
+ interrupt-parent = <&mbigen_sas1>;
+ interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+ <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+ <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+ <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+ <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+ <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+ <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+ <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+ <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+ <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+ <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+ <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+ <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+ <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+ <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+ <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+ <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+ <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+ <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+ <159 4>,<576 1>,<577 1>,<578 1>,<579 1>,
+ <580 1>,<581 1>,<582 1>,<583 1>,<584 1>,
+ <585 1>,<586 1>,<587 1>,<588 1>,<589 1>,
+ <590 1>,<591 1>,<592 1>,<593 1>,<594 1>,
+ <595 1>,<596 1>,<597 1>,<598 1>,<599 1>,
+ <600 1>,<601 1>,<602 1>,<603 1>,<604 1>,
+ <605 1>,<606 1>,<607 1>;
+ status = "disabled";
+ };
+
+ sas2: sas@a3000000 {
+ compatible = "hisilicon,hip07-sas-v2";
+ reg = <0 0xa3000000 0 0x10000>;
+ sas-addr = [50 01 88 20 16 00 00 00];
+ hisilicon,sas-syscon = <&pcie_subctl>;
+ ctrl-reset-reg = <0xae0>;
+ ctrl-reset-sts-reg = <0x5a70>;
+ ctrl-clock-ena-reg = <0x3a8>;
+ queue-count = <16>;
+ phy-count = <9>;
+ dma-coherent;
+ interrupt-parent = <&mbigen_sas2>;
+ interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>,
+ <197 4>,<198 4>,<199 4>,<200 4>,<201 4>,
+ <202 4>,<203 4>,<204 4>,<205 4>,<206 4>,
+ <207 4>,<208 4>,<209 4>,<210 4>,<211 4>,
+ <212 4>,<213 4>,<214 4>,<215 4>,<216 4>,
+ <217 4>,<218 4>,<219 4>,<220 4>,<221 4>,
+ <222 4>,<223 4>,<224 4>,<225 4>,<226 4>,
+ <227 4>,<228 4>,<229 4>,<230 4>,<231 4>,
+ <232 4>,<233 4>,<234 4>,<235 4>,<236 4>,
+ <237 4>,<238 4>,<239 4>,<240 4>,<241 4>,
+ <242 4>,<243 4>,<244 4>,<245 4>,<246 4>,
+ <247 4>,<248 4>,<249 4>,<250 4>,<251 4>,
+ <252 4>,<253 4>,<254 4>,<255 4>,<256 4>,
+ <257 4>,<258 4>,<259 4>,<260 4>,<261 4>,
+ <262 4>,<263 4>,<264 4>,<265 4>,<266 4>,
+ <267 4>,<268 4>,<269 4>,<270 4>,<271 4>,
+ <272 4>,<273 4>,<274 4>,<275 4>,<276 4>,
+ <277 4>,<278 4>,<279 4>,<280 4>,<281 4>,
+ <282 4>,<283 4>,<284 4>,<285 4>,<286 4>,
+ <287 4>,<608 1>,<609 1>,<610 1>,<611 1>,
+ <612 1>,<613 1>,<614 1>,<615 1>,<616 1>,
+ <617 1>,<618 1>,<619 1>,<620 1>,<621 1>,
+ <622 1>,<623 1>,<624 1>,<625 1>,<626 1>,
+ <627 1>,<628 1>,<629 1>,<630 1>,<631 1>,
+ <632 1>,<633 1>,<634 1>,<635 1>,<636 1>,
+ <637 1>,<638 1>,<639 1>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/include/arm b/arch/arm64/boot/dts/include/arm
new file mode 120000
index 0000000..cf63d80
--- /dev/null
+++ b/arch/arm64/boot/dts/include/arm
@@ -0,0 +1 @@
+../../../../arm/boot/dts
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/include/arm64 b/arch/arm64/boot/dts/include/arm64
new file mode 120000
index 0000000..a96aa0e
--- /dev/null
+++ b/arch/arm64/boot/dts/include/arm64
@@ -0,0 +1 @@
+..
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index a07a0c1..cef5f97 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -46,6 +46,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "armada-372x.dtsi"
/ {
@@ -60,10 +61,49 @@
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
+
+ exp_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3_phy: usb3-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&exp_usb3_vbus>;
+ };
};
&i2c0 {
status = "okay";
+
+ gpio_exp: pca9555@22 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0x22>;
+ /*
+ * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT
+ * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE
+ * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN
+ * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN
+ * IO0_4: PWR_EN_SD
+ * IO0_5: PWR_EN_EMMC
+ * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL
+ * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS
+ */
+ };
+
+ rtc@68 {
+ /* PT7C4337A from pericom fully compatible with the ds1337 */
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
};
/* CON3 */
@@ -106,9 +146,19 @@
status = "okay";
};
+&sdhci0 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+};
+
/* CON31 */
&usb3 {
status = "okay";
+ usb-phy = <&usb3_phy>;
};
/* CON17 (PCIe) / CON12 (mini-PCIe) */
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 42747b7..58ae9e0 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -112,6 +112,8 @@
i2c0: i2c@11000 {
compatible = "marvell,armada-3700-i2c";
reg = <0x11000 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&nb_periph_clk 10>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
mrvl,i2c-fast-mode;
@@ -121,6 +123,8 @@
i2c1: i2c@11080 {
compatible = "marvell,armada-3700-i2c";
reg = <0x11080 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&nb_periph_clk 9>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
mrvl,i2c-fast-mode;
@@ -196,7 +200,8 @@
compatible = "marvell,armada3700-xhci",
"generic-xhci";
reg = <0x58000 0x4000>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 12>;
status = "disabled";
};
@@ -220,6 +225,17 @@
};
};
+ sdhci0: sdhci@d8000 {
+ compatible = "marvell,armada-3700-sdhci",
+ "marvell,sdhci-xenon";
+ reg = <0xd8000 0x300
+ 0x17808 0x4>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nb_periph_clk 0>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
sata: sata@e0000 {
compatible = "marvell,armada-3700-ahci";
reg = <0xe0000 0x2000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 070b589..1244232 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -146,3 +146,46 @@
&cpm_usb3_1 {
status = "okay";
};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
+
+&cpm_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cpm_ethernet {
+ status = "okay";
+};
+
+&cpm_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "sgmii";
+};
+
+&cpm_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};
+
+&cpm_crypto {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index 048e5cf..7c08f1f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -54,3 +54,13 @@
compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
"marvell,armada-ap806";
};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+
+&cpm_rtc {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 6e6f182..dc0d084 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -124,6 +124,26 @@
status = "okay";
};
+&cpm_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&cpm_ethernet {
+ status = "okay";
+};
+
+&cpm_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};
+
+&cpm_crypto {
+ status = "okay";
+};
+
/* CON5 on CP1 expansion */
&cps_pcie2 {
status = "okay";
@@ -148,3 +168,15 @@
&cps_usb3_1 {
status = "okay";
};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 9c1b28c..33813a7 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -54,3 +54,12 @@
compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
"marvell,armada-ap806";
};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+&cpm_rtc {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 5019c8f4..fe41bf9 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -229,6 +229,17 @@
};
+ ap_sdhci0: sdhci@6e0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0x6e0000 0x300>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&ap_syscon 4>;
+ dma-coherent;
+ marvell,xenon-phy-slow-mode;
+ status = "disabled";
+ };
+
ap_syscon: system-controller@6f4000 {
compatible = "marvell,ap806-system-controller",
"syscon";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 3a99c36..ac8df52 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -59,6 +59,43 @@
interrupt-parent = <&gic>;
ranges = <0x0 0x0 0xf2000000 0x2000000>;
+ cpm_ethernet: ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk";
+ status = "disabled";
+ dma-coherent;
+
+ cpm_eth0: eth0 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ cpm_eth1: eth1 {
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ cpm_eth2: eth2 {
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ cpm_mdio: mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ };
+
cpm_syscon0: system-controller@440000 {
compatible = "marvell,cp110-system-controller0",
"syscon";
@@ -79,6 +116,13 @@
"cpm-usb3dev", "cpm-eip150", "cpm-eip197";
};
+ cpm_rtc: rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
cpm_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
@@ -173,6 +217,32 @@
clocks = <&cpm_syscon0 1 25>;
status = "okay";
};
+
+ cpm_sdhci0: sdhci@780000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&cpm_syscon0 1 4>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ cpm_crypto: crypto@800000 {
+ compatible = "inside-secure,safexcel-eip197";
+ reg = <0x800000 0x200000>;
+ interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
+ | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clocks = <&cpm_syscon0 1 26>;
+ status = "disabled";
+ };
};
cpm_pcie0: pcie@f2600000 {
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 9e09c4d..7740a75 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -59,6 +59,50 @@
interrupt-parent = <&gic>;
ranges = <0x0 0x0 0xf4000000 0x2000000>;
+ cps_rtc: rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cps_ethernet: ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk";
+ status = "disabled";
+ dma-coherent;
+
+ cps_eth0: eth0 {
+ interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ cps_eth1: eth1 {
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ cps_eth2: eth2 {
+ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ cps_mdio: mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ };
+
cps_syscon0: system-controller@440000 {
compatible = "marvell,cp110-system-controller0",
"syscon";
@@ -173,6 +217,22 @@
clocks = <&cps_syscon0 1 25>;
status = "okay";
};
+
+ cps_crypto: crypto@800000 {
+ compatible = "inside-secure,safexcel-eip197";
+ reg = <0x800000 0x200000>;
+ interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
+ | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clocks = <&cps_syscon0 1 26>;
+ status = "disabled";
+ };
};
cps_pcie0: pcie@f4600000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 3f3a46a..2b17936 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -224,7 +224,7 @@
};
flow-controller@60007000 {
- compatible = "nvidia,tegra124-flowctrl";
+ compatible = "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl";
reg = <0x0 0x60007000 0x0 0x1000>;
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 0d3c099..8daadad 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -1,8 +1,99 @@
/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+
#include "tegra186-p3310.dtsi"
/ {
model = "NVIDIA Tegra186 P2771-0000 Development Board";
compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+
+ i2c@3160000 {
+ power-monitor@42 {
+ compatible = "ti,ina3221";
+ reg = <0x42>;
+ };
+
+ power-monitor@43 {
+ compatible = "ti,ina3221";
+ reg = <0x43>;
+ };
+
+ exp1: gpio@74 {
+ compatible = "ti,tca9539";
+ reg = <0x74>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_MAIN_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ exp2: gpio@77 {
+ compatible = "ti,tca9539";
+ reg = <0x77>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_MAIN_GPIO(Y, 6) GPIO_ACTIVE_LOW>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
+ /* SDMMC1 (SD/MMC) */
+ sdhci@3400000 {
+ status = "okay";
+
+ vmmc-supply = <&vdd_sd>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 0)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 1)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <10>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 2)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <10>;
+ };
+ };
+
+ regulators {
+ vdd_sd: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+
+ regulator-name = "SD_CARD_SW_PWR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_3v3_sys>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 1abe2ec..cf84d70 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -1,11 +1,23 @@
#include "tegra186.dtsi"
+#include <dt-bindings/mfd/max77620.h>
+
/ {
model = "NVIDIA Tegra186 P3310 Processor Module";
compatible = "nvidia,p3310", "nvidia,tegra186";
aliases {
+ sdhci0 = "/sdhci@3460000";
+ sdhci1 = "/sdhci@3400000";
serial0 = &uarta;
+ i2c0 = "/bpmp/i2c";
+ i2c1 = "/i2c@3160000";
+ i2c2 = "/i2c@c240000";
+ i2c3 = "/i2c@3180000";
+ i2c4 = "/i2c@3190000";
+ i2c5 = "/i2c@31c0000";
+ i2c6 = "/i2c@c250000";
+ i2c7 = "/i2c@31e0000";
};
chosen {
@@ -18,14 +30,99 @@
reg = <0x0 0x80000000 0x2 0x00000000>;
};
+ ethernet@2490000 {
+ status = "okay";
+
+ phy-reset-gpios = <&gpio TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+ phy-handle = <&phy>;
+ phy-mode = "rgmii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+
serial@3100000 {
status = "okay";
};
+ i2c@3160000 {
+ status = "okay";
+
+ power-monitor@40 {
+ compatible = "ti,ina3221";
+ reg = <0x40>;
+ };
+
+ power-monitor@41 {
+ compatible = "ti,ina3221";
+ reg = <0x41>;
+ };
+ };
+
+ i2c@3180000 {
+ status = "okay";
+ };
+
+ i2c@3190000 {
+ status = "okay";
+ };
+
+ i2c@31c0000 {
+ status = "okay";
+ };
+
+ i2c@31e0000 {
+ status = "okay";
+ };
+
+ /* SDMMC1 (SD/MMC) */
+ sdhci@3400000 {
+ cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+
+ vqmmc-supply = <&vddio_sdmmc1>;
+ };
+
+ /* SDMMC3 (SDIO) */
+ sdhci@3440000 {
+ status = "okay";
+ };
+
+ /* SDMMC4 (eMMC) */
+ sdhci@3460000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vqmmc-supply = <&vdd_1v8_ap>;
+ vmmc-supply = <&vdd_3v3_sys>;
+ };
+
hsp@3c00000 {
status = "okay";
};
+ i2c@c240000 {
+ status = "okay";
+ };
+
+ i2c@c250000 {
+ status = "okay";
+ };
+
+ pmc@c360000 {
+ nvidia,invert-interrupt;
+ };
+
cpus {
cpu@0 {
enable-method = "psci";
@@ -53,7 +150,192 @@
};
bpmp {
- status = "okay";
+ i2c {
+ status = "okay";
+
+ pmic: pmic@3c {
+ compatible = "maxim,max77620";
+ reg = <0x3c>;
+
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77620_default>;
+
+ max77620_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+ };
+
+ gpio2 {
+ pins = "gpio2";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ };
+
+ gpio3 {
+ pins = "gpio3";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ };
+
+ gpio4 {
+ pins = "gpio4";
+ function = "32k-out1";
+ drive-push-pull = <1>;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "gpio";
+ drive-push-pull = <0>;
+ };
+
+ gpio6 {
+ pins = "gpio6";
+ function = "gpio";
+ drive-push-pull = <1>;
+ };
+
+ gpio7 {
+ pins = "gpio7";
+ function = "gpio";
+ drive-push-pull = <0>;
+ };
+ };
+
+ fps {
+ fps0 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+
+ fps1 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+
+ fps2 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+ };
+
+ regulators {
+ in-sd0-supply = <&vdd_5v0_sys>;
+ in-sd1-supply = <&vdd_5v0_sys>;
+ in-sd2-supply = <&vdd_5v0_sys>;
+ in-sd3-supply = <&vdd_5v0_sys>;
+
+ in-ldo0-1-supply = <&vdd_5v0_sys>;
+ in-ldo2-supply = <&vdd_5v0_sys>;
+ in-ldo3-5-supply = <&vdd_5v0_sys>;
+ in-ldo4-6-supply = <&vdd_1v8>;
+ in-ldo7-8-supply = <&avdd_dsi_csi>;
+
+ sd0 {
+ regulator-name = "VDD_DDR_1V1_PMIC";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ avdd_dsi_csi: sd1 {
+ regulator-name = "AVDD_DSI_CSI_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ /* XXX */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8: sd2 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* XXX */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3_sys: sd3 {
+ regulator-name = "VDD_3V3_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* XXX */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo0 {
+ regulator-name = "VDD_1V8_AP_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* XXX */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2 {
+ regulator-name = "VDDIO_3V3_AOHV";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* XXX */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vddio_sdmmc1: ldo3 {
+ regulator-name = "VDDIO_SDMMC1_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4 {
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vddio_sdmmc3: ldo5 {
+ regulator-name = "VDDIO_SDMMC3_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ avdd_1v05: ldo7 {
+ regulator-name = "VDD_HDMI_1V05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ /* XXX */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_pex: ldo8 {
+ regulator-name = "VDD_PEX_1V05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ /* XXX */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
psci {
@@ -61,4 +343,39 @@
status = "okay";
method = "smc";
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_sys: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+
+ regulator-name = "VDD_5V0_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8_ap: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+
+ regulator-name = "VDD_1V8_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* XXX */
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_1v8>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 62fa85a..5e62e68 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -2,6 +2,7 @@
#include <dt-bindings/gpio/tegra186-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/power/tegra186-powergate.h>
#include <dt-bindings/reset/tegra186-reset.h>
/ {
@@ -27,6 +28,37 @@
gpio-controller;
};
+ ethernet@2490000 {
+ compatible = "nvidia,tegra186-eqos",
+ "snps,dwc-qos-ethernet-4.10";
+ reg = <0x0 0x02490000 0x0 0x10000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* common */
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, /* power */
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, /* rx0 */
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, /* tx0 */
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* rx1 */
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, /* tx1 */
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* rx2 */
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* tx2 */
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* rx3 */
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; /* tx3 */
+ clocks = <&bpmp TEGRA186_CLK_AXI_CBB>,
+ <&bpmp TEGRA186_CLK_EQOS_AXI>,
+ <&bpmp TEGRA186_CLK_EQOS_RX>,
+ <&bpmp TEGRA186_CLK_EQOS_TX>,
+ <&bpmp TEGRA186_CLK_EQOS_PTP_REF>;
+ clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
+ resets = <&bpmp TEGRA186_RESET_EQOS>;
+ reset-names = "eqos";
+ status = "disabled";
+
+ snps,write-requests = <1>;
+ snps,read-requests = <3>;
+ snps,burst-map = <0x7>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <8>;
+ };
+
uarta: serial@3100000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x03100000 0x0 0x40>;
@@ -307,6 +339,33 @@
#interrupt-cells = <2>;
};
+ pmc@c360000 {
+ compatible = "nvidia,tegra186-pmc";
+ reg = <0 0x0c360000 0 0x10000>,
+ <0 0x0c370000 0 0x10000>,
+ <0 0x0c380000 0 0x10000>,
+ <0 0x0c390000 0 0x10000>;
+ reg-names = "pmc", "wake", "aotag", "scratch";
+ };
+
+ gpu@17000000 {
+ compatible = "nvidia,gp10b";
+ reg = <0x0 0x17000000 0x0 0x1000000>,
+ <0x0 0x18000000 0x0 0x1000000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "stall", "nonstall";
+
+ clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+ <&bpmp TEGRA186_CLK_GPU>;
+ clock-names = "gpu", "pwr";
+ resets = <&bpmp TEGRA186_RESET_GPU>;
+ reset-names = "gpu";
+ status = "disabled";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+ };
+
sysram@30000000 {
compatible = "nvidia,tegra186-sysram", "mmio-sram";
reg = <0x0 0x30000000 0x0 0x50000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 2f832df..8f26c4d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -89,6 +89,8 @@
ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>;
+ iommus = <&mc TEGRA_SWGROUP_HC>;
+
dpaux1: dpaux@54040000 {
compatible = "nvidia,tegra210-dpaux";
reg = <0x0 0x54040000 0x0 0x00040000>;
@@ -185,7 +187,14 @@
vic@54340000 {
compatible = "nvidia,tegra210-vic";
reg = <0x0 0x54340000 0x0 0x00040000>;
- status = "disabled";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_VIC03>;
+ clock-names = "vic";
+ resets = <&tegra_car 178>;
+ reset-names = "vic";
+
+ iommus = <&mc TEGRA_SWGROUP_VIC>;
+ power-domains = <&pd_vic>;
};
nvjpg@54380000 {
@@ -755,6 +764,14 @@
resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
#power-domain-cells = <0>;
};
+
+ pd_vic: vic {
+ clocks = <&tegra_car TEGRA210_CLK_VIC03>;
+ clock-names = "vic";
+ resets = <&tegra_car 178>;
+ reset-names = "vic";
+ #power-domain-cells = <0>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index eac5389..a17f5b9 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -35,6 +35,17 @@
stdout-path = "serial0";
};
+ reserved-memory {
+ ramoops@bff00000{
+ compatible = "ramoops";
+ reg = <0x0 0xbff00000 0x0 0x100000>;
+
+ record-size = <0x20000>;
+ console-size = <0x20000>;
+ ftrace-size = <0x20000>;
+ };
+ };
+
soc {
dma@7884000 {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 68a8e67..ab30939 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -157,7 +157,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
};
@@ -833,8 +833,9 @@
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
- <&gcc GCC_BOOT_ROM_AHB_CLK>;
- clock-names = "iface", "bus", "mem";
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
qcom,smem-states = <&hexagon_smp2p_out 0>;
qcom,smem-state-names = "stop";
@@ -842,6 +843,7 @@
resets = <&scm 0>;
reset-names = "mss_restart";
+ cx-supply = <&pm8916_s1>;
mx-supply = <&pm8916_l3>;
pll-supply = <&pm8916_l7>;
@@ -856,6 +858,16 @@
mpss {
memory-region = <&mpss_mem>;
};
+
+ smd-edge {
+ interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,smd-edge = <0>;
+ qcom,ipc = <&apcs 8 12>;
+ qcom,remote-pid = <1>;
+
+ label = "hexagon";
+ };
};
pronto: wcnss@a21b000 {
@@ -1214,14 +1226,6 @@
};
};
};
-
- hexagon {
- interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,smd-edge = <0>;
- qcom,ipc = <&apcs 8 12>;
- qcom,remote-pid = <1>;
- };
};
hexagon-smp2p {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ed7223d..9bc9c85 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -534,6 +534,26 @@
};
};
+ adsp-pil {
+ compatible = "qcom,msm8996-adsp-pil";
+
+ interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_region>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+ };
+
adsp-smp2p {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
@@ -547,7 +567,7 @@
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
- #qcom,state-cells = <1>;
+ #qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
@@ -557,5 +577,29 @@
#interrupt-cells = <2>;
};
};
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 16 26>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+ };
+
};
#include "msm8996-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 0f18660..b413e44 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -9,6 +9,13 @@
#address-cells = <1>;
#size-cells = <0>;
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
pm8994_gpios: gpios@c000 {
compatible = "qcom,pm8994-gpio";
reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index c5f8f69..ab35215 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -33,6 +33,21 @@
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -213,7 +228,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&i2c2 {
@@ -339,18 +353,7 @@
status = "okay";
phy0: ethernet-phy@0 {
- rxc-skew-ps = <900>;
- rxdv-skew-ps = <0>;
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- txc-skew-ps = <900>;
- txen-skew-ps = <0>;
- txd0-skew-ps = <0>;
- txd1-skew-ps = <0>;
- txd2-skew-ps = <0>;
- txd3-skew-ps = <0>;
+ rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 7a8986e..639aa08 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -56,7 +56,7 @@
reg = <0x0 0x48000000 0x0 0x38000000>;
};
- x12_clk: x12_clk {
+ x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
@@ -247,8 +247,22 @@
};
avb_pins: avb {
- groups = "avb_mdc";
- function = "avb";
+ mux {
+ groups = "avb_link", "avb_phy_int", "avb_mdc",
+ "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdc {
+ groups = "avb_mdc";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
};
du_pins: du {
@@ -348,7 +362,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&i2c2 {
@@ -485,6 +498,10 @@
clock-frequency = <22579200>;
};
+&i2c_dvfs {
+ status = "okay";
+};
+
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
@@ -493,18 +510,7 @@
status = "okay";
phy0: ethernet-phy@0 {
- rxc-skew-ps = <900>;
- rxdv-skew-ps = <0>;
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- txc-skew-ps = <900>;
- txen-skew-ps = <0>;
- txd0-skew-ps = <0>;
- txd1-skew-ps = <0>;
- txd2-skew-ps = <0>;
- txd3-skew-ps = <0>;
+ rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
@@ -567,7 +573,6 @@
&pcie_bus_clk {
clock-frequency = <100000000>;
- status = "okay";
};
&pciec0 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index eac4f29..e99d644 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -25,10 +25,11 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
};
psci {
- compatible = "arm,psci-0.2";
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
};
@@ -72,17 +73,51 @@
enable-method = "psci";
};
- L2_CA57: cache-controller@0 {
+ a53_0: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ L2_CA57: cache-controller-0 {
compatible = "cache";
- reg = <0>;
power-domains = <&sysc R8A7795_PD_CA57_SCU>;
cache-unified;
cache-level = <2>;
};
- L2_CA53: cache-controller@100 {
+ L2_CA53: cache-controller-1 {
compatible = "cache";
- reg = <0x100>;
power-domains = <&sysc R8A7795_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
@@ -165,10 +200,11 @@
<0x0 0xf1040000 0 0x20000>,
<0x0 0xf1060000 0 0x20000>;
interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
wdt0: watchdog@e6020000 {
@@ -176,6 +212,7 @@
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
status = "disabled";
};
@@ -191,6 +228,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
@@ -205,6 +243,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
@@ -219,6 +258,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
@@ -233,6 +273,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
@@ -247,6 +288,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
@@ -261,6 +303,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
@@ -275,6 +318,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
};
gpio7: gpio@e6055800 {
@@ -289,6 +333,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
pmu_a57 {
@@ -303,16 +348,28 @@
<&a57_3>;
};
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>,
+ <&a53_1>,
+ <&a53_2>,
+ <&a53_3>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
cpg: clock-controller@e6150000 {
@@ -322,6 +379,7 @@
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
+ #reset-cells = <1>;
};
rst: reset-controller@e6160000 {
@@ -358,6 +416,7 @@
GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
dmac0: dma-controller@e6700000 {
@@ -389,6 +448,7 @@
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -422,6 +482,7 @@
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -455,6 +516,7 @@
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -488,6 +550,7 @@
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -521,6 +584,7 @@
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -563,7 +627,8 @@
"ch24";
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- phy-mode = "rgmii-id";
+ resets = <&cpg 812>;
+ phy-mode = "rgmii-txid";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -581,6 +646,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -596,6 +662,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -612,6 +679,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
status = "disabled";
channel0 {
@@ -636,6 +704,7 @@
dmas = <&dmac1 0x31>, <&dmac1 0x30>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
status = "disabled";
};
@@ -652,6 +721,7 @@
dmas = <&dmac1 0x33>, <&dmac1 0x32>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
status = "disabled";
};
@@ -668,6 +738,7 @@
dmas = <&dmac1 0x35>, <&dmac1 0x34>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
status = "disabled";
};
@@ -684,6 +755,7 @@
dmas = <&dmac0 0x37>, <&dmac0 0x36>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
status = "disabled";
};
@@ -700,6 +772,7 @@
dmas = <&dmac0 0x39>, <&dmac0 0x38>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
status = "disabled";
};
@@ -715,6 +788,7 @@
dmas = <&dmac1 0x51>, <&dmac1 0x50>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -730,6 +804,7 @@
dmas = <&dmac1 0x53>, <&dmac1 0x52>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -745,6 +820,7 @@
dmas = <&dmac1 0x13>, <&dmac1 0x12>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
status = "disabled";
};
@@ -760,6 +836,7 @@
dmas = <&dmac0 0x57>, <&dmac0 0x56>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -775,6 +852,7 @@
dmas = <&dmac0 0x59>, <&dmac0 0x58>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -790,6 +868,21 @@
dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7795",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
status = "disabled";
};
@@ -802,6 +895,7 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
dmas = <&dmac1 0x91>, <&dmac1 0x90>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -817,6 +911,7 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
dmas = <&dmac1 0x93>, <&dmac1 0x92>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -832,6 +927,7 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
dmas = <&dmac1 0x95>, <&dmac1 0x94>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -847,6 +943,7 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
dmas = <&dmac0 0x97>, <&dmac0 0x96>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -862,6 +959,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
dmas = <&dmac0 0x99>, <&dmac0 0x98>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -877,6 +975,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -892,6 +991,7 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -903,6 +1003,7 @@
reg = <0 0xe6e30000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -912,6 +1013,7 @@
reg = <0 0xe6e31000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -921,6 +1023,7 @@
reg = <0 0xe6e32000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -930,6 +1033,7 @@
reg = <0 0xe6e33000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -939,6 +1043,7 @@
reg = <0 0xe6e34000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -948,6 +1053,7 @@
reg = <0 0xe6e35000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -957,6 +1063,7 @@
reg = <0 0xe6e36000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -1015,11 +1122,11 @@
rcar_sound,dvc {
dvc0: dvc-0 {
- dmas = <&audma0 0xbc>;
+ dmas = <&audma1 0xbc>;
dma-names = "tx";
};
dvc1: dvc-1 {
- dmas = <&audma0 0xbe>;
+ dmas = <&audma1 0xbe>;
dma-names = "tx";
};
};
@@ -1149,10 +1256,11 @@
sata: sata@ee300000 {
compatible = "renesas,sata-r8a7795";
- reg = <0 0xee300000 0 0x1fff>;
+ reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
status = "disabled";
};
@@ -1162,6 +1270,7 @@
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
status = "disabled";
};
@@ -1171,6 +1280,7 @@
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 327>;
status = "disabled";
};
@@ -1183,6 +1293,7 @@
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -1196,6 +1307,7 @@
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -1207,6 +1319,7 @@
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -1217,6 +1330,7 @@
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
status = "disabled";
};
@@ -1227,6 +1341,7 @@
clocks = <&cpg CPG_MOD 312>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -1237,6 +1352,7 @@
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -1247,6 +1363,7 @@
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1257,6 +1374,7 @@
reg = <0 0xee0a0200 0 0x700>;
clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1267,6 +1385,7 @@
reg = <0 0xee0c0200 0 0x700>;
clocks = <&cpg CPG_MOD 701>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1279,6 +1398,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
};
@@ -1290,6 +1410,7 @@
phys = <&usb2_phy1>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
status = "disabled";
};
@@ -1301,6 +1422,7 @@
phys = <&usb2_phy2>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
status = "disabled";
};
@@ -1312,6 +1434,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
};
@@ -1323,6 +1446,7 @@
phys = <&usb2_phy1>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
status = "disabled";
};
@@ -1334,6 +1458,7 @@
phys = <&usb2_phy2>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
status = "disabled";
};
@@ -1350,6 +1475,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
status = "disabled";
};
@@ -1376,6 +1502,7 @@
clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
status = "disabled";
};
@@ -1402,6 +1529,7 @@
clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
status = "disabled";
};
@@ -1411,6 +1539,7 @@
interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 624>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 624>;
renesas,fcp = <&fcpvb1>;
};
@@ -1420,6 +1549,7 @@
reg = <0 0xfe92f000 0 0x200>;
clocks = <&cpg CPG_MOD 606>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 606>;
};
fcpf0: fcp@fe950000 {
@@ -1427,6 +1557,7 @@
reg = <0 0xfe950000 0 0x200>;
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 615>;
};
fcpf1: fcp@fe951000 {
@@ -1434,6 +1565,7 @@
reg = <0 0xfe951000 0 0x200>;
clocks = <&cpg CPG_MOD 614>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 614>;
};
fcpf2: fcp@fe952000 {
@@ -1441,6 +1573,7 @@
reg = <0 0xfe952000 0 0x200>;
clocks = <&cpg CPG_MOD 613>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 613>;
};
vspbd: vsp@fe960000 {
@@ -1449,6 +1582,7 @@
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 626>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 626>;
renesas,fcp = <&fcpvb0>;
};
@@ -1458,6 +1592,7 @@
reg = <0 0xfe96f000 0 0x200>;
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 607>;
};
vspi0: vsp@fe9a0000 {
@@ -1466,6 +1601,7 @@
interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 631>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 631>;
renesas,fcp = <&fcpvi0>;
};
@@ -1475,6 +1611,7 @@
reg = <0 0xfe9af000 0 0x200>;
clocks = <&cpg CPG_MOD 611>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 611>;
};
vspi1: vsp@fe9b0000 {
@@ -1483,6 +1620,7 @@
interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 630>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 630>;
renesas,fcp = <&fcpvi1>;
};
@@ -1492,6 +1630,7 @@
reg = <0 0xfe9bf000 0 0x200>;
clocks = <&cpg CPG_MOD 610>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 610>;
};
vspi2: vsp@fe9c0000 {
@@ -1500,6 +1639,7 @@
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 629>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 629>;
renesas,fcp = <&fcpvi2>;
};
@@ -1509,6 +1649,7 @@
reg = <0 0xfe9cf000 0 0x200>;
clocks = <&cpg CPG_MOD 609>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 609>;
};
vspd0: vsp@fea20000 {
@@ -1517,6 +1658,7 @@
interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 623>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
renesas,fcp = <&fcpvd0>;
};
@@ -1526,6 +1668,7 @@
reg = <0 0xfea27000 0 0x200>;
clocks = <&cpg CPG_MOD 603>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
};
vspd1: vsp@fea28000 {
@@ -1534,6 +1677,7 @@
interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 622>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
renesas,fcp = <&fcpvd1>;
};
@@ -1543,6 +1687,7 @@
reg = <0 0xfea2f000 0 0x200>;
clocks = <&cpg CPG_MOD 602>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
};
vspd2: vsp@fea30000 {
@@ -1551,6 +1696,7 @@
interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 621>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 621>;
renesas,fcp = <&fcpvd2>;
};
@@ -1560,6 +1706,7 @@
reg = <0 0xfea37000 0 0x200>;
clocks = <&cpg CPG_MOD 601>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 601>;
};
vspd3: vsp@fea38000 {
@@ -1568,6 +1715,7 @@
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 620>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 620>;
renesas,fcp = <&fcpvd3>;
};
@@ -1577,6 +1725,7 @@
reg = <0 0xfea3f000 0 0x200>;
clocks = <&cpg CPG_MOD 600>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 600>;
};
fdp1@fe940000 {
@@ -1585,6 +1734,7 @@
interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 119>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 119>;
renesas,fcp = <&fcpf0>;
};
@@ -1594,6 +1744,7 @@
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 118>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 118>;
renesas,fcp = <&fcpf1>;
};
@@ -1603,6 +1754,7 @@
interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 117>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 117>;
renesas,fcp = <&fcpf2>;
};
@@ -1662,6 +1814,7 @@
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index c3f064a..372b2a9 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -180,7 +180,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&wdt0 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index c7f40f8..c9f59b6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -18,6 +18,7 @@
aliases {
serial0 = &scif2;
+ serial1 = &scif1;
ethernet0 = &avb;
};
@@ -113,6 +114,11 @@
function = "avb";
};
+ scif1_pins: scif1 {
+ groups = "scif1_data_a", "scif1_ctrl";
+ function = "scif1";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
@@ -172,18 +178,7 @@
status = "okay";
phy0: ethernet-phy@0 {
- rxc-skew-ps = <900>;
- rxdv-skew-ps = <0>;
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- txc-skew-ps = <900>;
- txen-skew-ps = <0>;
- txd0-skew-ps = <0>;
- txd1-skew-ps = <0>;
- txd2-skew-ps = <0>;
- txd3-skew-ps = <0>;
+ rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
@@ -239,6 +234,14 @@
status = "okay";
};
+&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
@@ -247,7 +250,6 @@
&scif_clk {
clock-frequency = <14745600>;
- status = "okay";
};
&i2c2 {
@@ -261,3 +263,7 @@
timeout-sec = <60>;
status = "okay";
};
+
+&i2c_dvfs {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index f7120cd..2ec1ed5f 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -25,10 +25,11 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
};
psci {
- compatible = "arm,psci-0.2";
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
};
@@ -36,7 +37,6 @@
#address-cells = <1>;
#size-cells = <0>;
- /* 1 core only at this point */
a57_0: cpu@0 {
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
@@ -46,13 +46,64 @@
enable-method = "psci";
};
- L2_CA57: cache-controller@0 {
+ a57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x1>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ };
+
+ a53_0: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA53_CPU1>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA53_CPU2>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA53_CPU3>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ L2_CA57: cache-controller-0 {
compatible = "cache";
- reg = <0>;
power-domains = <&sysc R8A7796_PD_CA57_SCU>;
cache-unified;
cache-level = <2>;
};
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc R8A7796_PD_CA53_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
extal_clk: extal {
@@ -100,22 +151,23 @@
<0x0 0xf1040000 0 0x20000>,
<0x0 0xf1060000 0 0x20000>;
interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
};
wdt0: watchdog@e6020000 {
@@ -124,6 +176,7 @@
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
status = "disabled";
};
@@ -139,6 +192,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
@@ -153,6 +207,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
@@ -167,6 +222,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
@@ -181,6 +237,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
@@ -195,6 +252,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
@@ -209,6 +267,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
@@ -223,6 +282,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
};
gpio7: gpio@e6055800 {
@@ -237,6 +297,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
pfc: pin-controller@e6060000 {
@@ -244,6 +305,26 @@
reg = <0 0xe6060000 0 0x50c>;
};
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>,
+ <&a57_1>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>,
+ <&a53_1>,
+ <&a53_2>,
+ <&a53_3>;
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7796-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -251,6 +332,7 @@
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
+ #reset-cells = <1>;
};
rst: reset-controller@e6160000 {
@@ -269,6 +351,20 @@
#power-domain-cells = <1>;
};
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7796",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -278,6 +374,7 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
dmas = <&dmac1 0x91>, <&dmac1 0x90>,
<&dmac2 0x91>, <&dmac2 0x90>;
dma-names = "tx", "rx", "tx", "rx";
@@ -294,6 +391,7 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
dmas = <&dmac1 0x93>, <&dmac1 0x92>,
<&dmac2 0x93>, <&dmac2 0x92>;
dma-names = "tx", "rx", "tx", "rx";
@@ -310,6 +408,7 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
dmas = <&dmac1 0x95>, <&dmac1 0x94>,
<&dmac2 0x95>, <&dmac2 0x94>;
dma-names = "tx", "rx", "tx", "rx";
@@ -326,6 +425,7 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
dmas = <&dmac0 0x97>, <&dmac0 0x96>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -341,6 +441,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
dmas = <&dmac0 0x99>, <&dmac0 0x98>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -356,6 +457,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -371,6 +473,7 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -389,6 +492,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -404,6 +508,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -420,6 +525,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
status = "disabled";
channel0 {
@@ -469,12 +575,135 @@
"ch24";
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- phy-mode = "rgmii-id";
+ resets = <&cpg 812>;
+ phy-mode = "rgmii-txid";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ hscif4: serial@e66b0000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66b0000 0 0x60>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a7796",
"renesas,rcar-gen3-scif", "renesas,scif";
@@ -485,6 +714,56 @@
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6f30000 0 64>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+ <&dmac2 0x5b>, <&dmac2 0x5a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -498,6 +777,7 @@
<&dmac2 0x41>, <&dmac2 0x40>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -513,6 +793,7 @@
<&dmac2 0x43>, <&dmac2 0x42>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -527,6 +808,7 @@
dmas = <&dmac0 0x45>, <&dmac0 0x44>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -541,6 +823,7 @@
dmas = <&dmac0 0x47>, <&dmac0 0x46>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -575,6 +858,7 @@
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -608,6 +892,7 @@
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -641,6 +926,7 @@
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -652,6 +938,7 @@
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -662,6 +949,7 @@
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
status = "disabled";
};
@@ -672,6 +960,7 @@
clocks = <&cpg CPG_MOD 312>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -682,6 +971,7 @@
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -695,6 +985,7 @@
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 3a86289..b5636bb 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,9 +1,11 @@
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
new file mode 100644
index 0000000..cf27239
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+ model = "Rockchip RK3328 EVB";
+ compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
new file mode 100644
index 0000000..7e69f1f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -0,0 +1,1264 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rk3328-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3328-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+ compatible = "rockchip,rk3328";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ clocks = <&cru ARMCLK>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ clocks = <&cru ARMCLK>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ clocks = <&cru ARMCLK>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ clocks = <&cru ARMCLK>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dmac: dmac@ff1f0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff1f0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ };
+
+ grf: syscon@ff100000 {
+ compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff100000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3328-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_hevc@RK3328_PD_HEVC {
+ reg = <RK3328_PD_HEVC>;
+ };
+ pd_video@RK3328_PD_VIDEO {
+ reg = <RK3328_PD_VIDEO>;
+ };
+ pd_vpu@RK3328_PD_VPU {
+ reg = <RK3328_PD_VPU>;
+ };
+ };
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x5c8>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ };
+
+ };
+
+ uart0: serial@ff110000 {
+ compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff110000 0x0 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 2>, <&dmac 3>;
+ #dma-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart1: serial@ff120000 {
+ compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff120000 0x0 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "sclk_uart", "pclk_uart";
+ dmas = <&dmac 4>, <&dmac 5>;
+ #dma-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff130000 {
+ compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff130000 0x0 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 6>, <&dmac 7>;
+ #dma-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_xfer>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ff150000 {
+ compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff150000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ff160000 {
+ compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff160000 0x0 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ff170000 {
+ compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff170000 0x0 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ff180000 {
+ compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff180000 0x0 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ status = "disabled";
+ };
+
+ spi0: spi@ff190000 {
+ compatible = "rockchip,rk3328-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff190000 0x0 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac 8>, <&dmac 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0m2_clk &spi0m2_tx &spi0m2_rx &spi0m2_cs0>;
+ status = "disabled";
+ };
+
+ wdt: watchdog@ff1a0000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x0 0xff1a0000 0x0 0x100>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ saradc: adc@ff280000 {
+ compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc";
+ reg = <0x0 0xff280000 0x0 0x100>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC_P>;
+ reset-names = "saradc-apb";
+ status = "disabled";
+ };
+
+ cru: clock-controller@ff440000 {
+ compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
+ reg = <0x0 0xff440000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks =
+ /*
+ * CPLL should run at 1200, but that is to high for
+ * the initial dividers of most of its children.
+ * We need set cpll child clk div first,
+ * and then set the cpll frequency.
+ */
+ <&cru DCLK_LCDC>, <&cru SCLK_PDM>,
+ <&cru SCLK_RTC32K>, <&cru SCLK_UART0>,
+ <&cru SCLK_UART1>, <&cru SCLK_UART2>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>,
+ <&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
+ <&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
+ <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
+ <&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
+ <&cru SCLK_SDIO>, <&cru SCLK_TSP>,
+ <&cru SCLK_WIFI>, <&cru ARMCLK>,
+ <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+ <&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_PERI>, <&cru PCLK_PERI>,
+ <&cru SCLK_RTC32K>;
+ assigned-clock-parents =
+ <&cru HDMIPHY>, <&cru PLL_APLL>,
+ <&cru PLL_GPLL>, <&xin24m>,
+ <&xin24m>, <&xin24m>;
+ assigned-clock-rates =
+ <0>, <61440000>,
+ <0>, <24000000>,
+ <24000000>, <24000000>,
+ <15000000>, <15000000>,
+ <100000000>, <100000000>,
+ <100000000>, <100000000>,
+ <50000000>, <100000000>,
+ <100000000>, <100000000>,
+ <50000000>, <50000000>,
+ <50000000>, <50000000>,
+ <24000000>, <600000000>,
+ <491520000>, <1200000000>,
+ <150000000>, <75000000>,
+ <75000000>, <150000000>,
+ <75000000>, <75000000>,
+ <32768>;
+ };
+
+ gmac2io: ethernet@ff540000 {
+ compatible = "rockchip,rk3328-gmac";
+ reg = <0x0 0xff540000 0x0 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_RX>,
+ <&cru SCLK_MAC2IO_TX>, <&cru SCLK_MAC2IO_REF>,
+ <&cru SCLK_MAC2IO_REFOUT>, <&cru ACLK_MAC2IO>,
+ <&cru PCLK_MAC2IO>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_ref",
+ "clk_mac_refout", "aclk_mac",
+ "pclk_mac";
+ resets = <&cru SRST_GMAC2IO_A>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ff811000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xff811000 0 0x1000>,
+ <0x0 0xff812000 0 0x2000>,
+ <0x0 0xff814000 0 0x2000>,
+ <0x0 0xff816000 0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3328-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio0@ff210000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff210000 0x0 0x100>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@ff220000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff220000 0x0 0x100>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@ff230000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff230000 0x0 0x100>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@ff240000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff240000 0x0 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+ bias-disable;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+ bias-pull-down;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+ bias-pull-up;
+ drive-strength = <12>;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ pcfg_input_high: pcfg-input-high {
+ bias-pull-up;
+ input-enable;
+ };
+
+ pcfg_input: pcfg-input {
+ input-enable;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>,
+ <2 RK_PD1 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>,
+ <2 RK_PA5 2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>,
+ <2 RK_PB6 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
+ <0 RK_PA6 2 &pcfg_pull_none>;
+ };
+ i2c3_gpio: i2c3-gpio {
+ rockchip,pins =
+ <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hdmi_i2c {
+ hdmii2c_xfer: hdmii2c-xfer {
+ rockchip,pins = <0 RK_PA5 1 &pcfg_pull_none>,
+ <0 RK_PA6 1 &pcfg_pull_none>;
+ };
+ };
+
+ tsadc {
+ otp_gpio: otp-gpio {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otp_out: otp-out {
+ rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>,
+ <1 RK_PB0 1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts_gpio: uart0-rts-gpio {
+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>,
+ <3 RK_PA6 4 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <3 RK_PA7 4 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
+ };
+
+ uart1_rts_gpio: uart1-rts-gpio {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart2-0 {
+ uart2m0_xfer: uart2m0-xfer {
+ rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>,
+ <1 RK_PA1 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2-1 {
+ uart2m1_xfer: uart2m1-xfer {
+ rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>,
+ <2 RK_PA1 1 &pcfg_pull_none>;
+ };
+ };
+
+ spi0-0 {
+ spi0m0_clk: spi0m0-clk {
+ rockchip,pins = <2 RK_PB0 1 &pcfg_pull_up>;
+ };
+
+ spi0m0_cs0: spi0m0-cs0 {
+ rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
+ };
+
+ spi0m0_tx: spi0m0-tx {
+ rockchip,pins = <2 RK_PB1 1 &pcfg_pull_up>;
+ };
+
+ spi0m0_rx: spi0m0-rx {
+ rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
+ };
+
+ spi0m0_cs1: spi0m0-cs1 {
+ rockchip,pins = <2 RK_PB4 1 &pcfg_pull_up>;
+ };
+ };
+
+ spi0-1 {
+ spi0m1_clk: spi0m1-clk {
+ rockchip,pins = <3 RK_PC7 2 &pcfg_pull_up>;
+ };
+
+ spi0m1_cs0: spi0m1-cs0 {
+ rockchip,pins = <3 RK_PD2 2 &pcfg_pull_up>;
+ };
+
+ spi0m1_tx: spi0m1-tx {
+ rockchip,pins = <3 RK_PD1 2 &pcfg_pull_up>;
+ };
+
+ spi0m1_rx: spi0m1-rx {
+ rockchip,pins = <3 RK_PD0 2 &pcfg_pull_up>;
+ };
+
+ spi0m1_cs1: spi0m1-cs1 {
+ rockchip,pins = <3 RK_PD3 2 &pcfg_pull_up>;
+ };
+ };
+
+ spi0-2 {
+ spi0m2_clk: spi0m2-clk {
+ rockchip,pins = <3 RK_PA0 4 &pcfg_pull_up>;
+ };
+
+ spi0m2_cs0: spi0m2-cs0 {
+ rockchip,pins = <3 RK_PB0 3 &pcfg_pull_up>;
+ };
+
+ spi0m2_tx: spi0m2-tx {
+ rockchip,pins = <3 RK_PA1 4 &pcfg_pull_up>;
+ };
+
+ spi0m2_rx: spi0m2-rx {
+ rockchip,pins = <3 RK_PA2 4 &pcfg_pull_up>;
+ };
+ };
+
+ i2s1 {
+ i2s1_mclk: i2s1-mclk {
+ rockchip,pins = <2 RK_PB7 1 &pcfg_pull_none>;
+ };
+
+ i2s1_sclk: i2s1-sclk {
+ rockchip,pins = <2 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ i2s1_lrckrx: i2s1-lrckrx {
+ rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>;
+ };
+
+ i2s1_lrcktx: i2s1-lrcktx {
+ rockchip,pins = <2 RK_PC1 1 &pcfg_pull_none>;
+ };
+
+ i2s1_sdi: i2s1-sdi {
+ rockchip,pins = <2 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ i2s1_sdo: i2s1-sdo {
+ rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
+ };
+
+ i2s1_sdio1: i2s1-sdio1 {
+ rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>;
+ };
+
+ i2s1_sdio2: i2s1-sdio2 {
+ rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ i2s1_sdio3: i2s1-sdio3 {
+ rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
+ };
+
+ i2s1_sleep: i2s1-sleep {
+ rockchip,pins =
+ <2 RK_PB7 RK_FUNC_GPIO &pcfg_input_high>,
+ <2 RK_PC0 RK_FUNC_GPIO &pcfg_input_high>,
+ <2 RK_PC1 RK_FUNC_GPIO &pcfg_input_high>,
+ <2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>,
+ <2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>,
+ <2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>,
+ <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+ <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
+ <2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+ };
+
+ i2s2-0 {
+ i2s2m0_mclk: i2s2m0-mclk {
+ rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ i2s2m0_sclk: i2s2m0-sclk {
+ rockchip,pins = <1 RK_PC6 1 &pcfg_pull_none>;
+ };
+
+ i2s2m0_lrckrx: i2s2m0-lrckrx {
+ rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>;
+ };
+
+ i2s2m0_lrcktx: i2s2m0-lrcktx {
+ rockchip,pins = <1 RK_PC7 1 &pcfg_pull_none>;
+ };
+
+ i2s2m0_sdi: i2s2m0-sdi {
+ rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>;
+ };
+
+ i2s2m0_sdo: i2s2m0-sdo {
+ rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>;
+ };
+
+ i2s2m0_sleep: i2s2m0-sleep {
+ rockchip,pins =
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
+ <1 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>,
+ <1 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>,
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>,
+ <1 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+ };
+
+ i2s2-1 {
+ i2s2m1_mclk: i2s2m1-mclk {
+ rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ i2s2m1_sclk: i2s2m1-sclk {
+ rockchip,pins = <3 RK_PA0 6 &pcfg_pull_none>;
+ };
+
+ i2s2m1_lrckrx: i2sm1-lrckrx {
+ rockchip,pins = <3 RK_PB0 6 &pcfg_pull_none>;
+ };
+
+ i2s2m1_lrcktx: i2s2m1-lrcktx {
+ rockchip,pins = <3 RK_PB0 4 &pcfg_pull_none>;
+ };
+
+ i2s2m1_sdi: i2s2m1-sdi {
+ rockchip,pins = <3 RK_PA2 6 &pcfg_pull_none>;
+ };
+
+ i2s2m1_sdo: i2s2m1-sdo {
+ rockchip,pins = <3 RK_PA1 6 &pcfg_pull_none>;
+ };
+
+ i2s2m1_sleep: i2s2m1-sleep {
+ rockchip,pins =
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+ <3 RK_PA0 RK_FUNC_GPIO &pcfg_input_high>,
+ <3 RK_PB0 RK_FUNC_GPIO &pcfg_input_high>,
+ <3 RK_PA2 RK_FUNC_GPIO &pcfg_input_high>,
+ <3 RK_PA1 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+ };
+
+ spdif-0 {
+ spdifm0_tx: spdifm0-tx {
+ rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+ };
+ };
+
+ spdif-1 {
+ spdifm1_tx: spdifm1-tx {
+ rockchip,pins = <2 RK_PC1 2 &pcfg_pull_none>;
+ };
+ };
+
+ spdif-2 {
+ spdifm2_tx: spdifm2-tx {
+ rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc0-0 {
+ sdmmc0m0_pwren: sdmmc0m0-pwren {
+ rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0m0_gpio: sdmmc0m0-gpio {
+ rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+ };
+ };
+
+ sdmmc0-1 {
+ sdmmc0m1_pwren: sdmmc0m1-pwren {
+ rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0m1_gpio: sdmmc0m1-gpio {
+ rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+ };
+ };
+
+ sdmmc0 {
+ sdmmc0_clk: sdmmc0-clk {
+ rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_4ma>;
+ };
+
+ sdmmc0_cmd: sdmmc0-cmd {
+ rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0_dectn: sdmmc0-dectn {
+ rockchip,pins = <1 RK_PA5 1 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0_wrprt: sdmmc0-wrprt {
+ rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0_bus1: sdmmc0-bus1 {
+ rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0_bus4: sdmmc0-bus4 {
+ rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_4ma>,
+ <1 RK_PA1 1 &pcfg_pull_up_4ma>,
+ <1 RK_PA2 1 &pcfg_pull_up_4ma>,
+ <1 RK_PA3 1 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0_gpio: sdmmc0-gpio {
+ rockchip,pins =
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+ };
+ };
+
+ sdmmc0ext {
+ sdmmc0ext_clk: sdmmc0ext-clk {
+ rockchip,pins = <3 RK_PA2 3 &pcfg_pull_none_4ma>;
+ };
+
+ sdmmc0ext_cmd: sdmmc0ext-cmd {
+ rockchip,pins = <3 RK_PA0 3 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0ext_wrprt: sdmmc0ext-wrprt {
+ rockchip,pins = <3 RK_PA3 3 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0ext_dectn: sdmmc0ext-dectn {
+ rockchip,pins = <3 RK_PA1 3 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0ext_bus1: sdmmc0ext-bus1 {
+ rockchip,pins = <3 RK_PA4 3 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0ext_bus4: sdmmc0ext-bus4 {
+ rockchip,pins =
+ <3 RK_PA4 3 &pcfg_pull_up_4ma>,
+ <3 RK_PA5 3 &pcfg_pull_up_4ma>,
+ <3 RK_PA6 3 &pcfg_pull_up_4ma>,
+ <3 RK_PA7 3 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0ext_gpio: sdmmc0ext-gpio {
+ rockchip,pins =
+ <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+ };
+ };
+
+ sdmmc1 {
+ sdmmc1_clk: sdmmc1-clk {
+ rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none_8ma>;
+ };
+
+ sdmmc1_cmd: sdmmc1-cmd {
+ rockchip,pins = <1 RK_PB5 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc1_pwren: sdmmc1-pwren {
+ rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc1_wrprt: sdmmc1-wrprt {
+ rockchip,pins = <1 RK_PC4 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc1_dectn: sdmmc1-dectn {
+ rockchip,pins = <1 RK_PC3 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc1_bus1: sdmmc1-bus1 {
+ rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc1_bus4: sdmmc1-bus4 {
+ rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>,
+ <1 RK_PB7 1 &pcfg_pull_up_8ma>,
+ <1 RK_PC0 1 &pcfg_pull_up_8ma>,
+ <1 RK_PC1 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc1_gpio: sdmmc1-gpio {
+ rockchip,pins =
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+ };
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <3 RK_PC5 2 &pcfg_pull_none_12ma>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up_12ma>;
+ };
+
+ emmc_pwren: emmc-pwren {
+ rockchip,pins = <3 RK_PC6 2 &pcfg_pull_none>;
+ };
+
+ emmc_rstnout: emmc-rstnout {
+ rockchip,pins = <3 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ emmc_bus1: emmc-bus1 {
+ rockchip,pins = <0 RK_PA7 2 &pcfg_pull_up_12ma>;
+ };
+
+ emmc_bus4: emmc-bus4 {
+ rockchip,pins =
+ <0 RK_PA7 2 &pcfg_pull_up_12ma>,
+ <2 RK_PD4 2 &pcfg_pull_up_12ma>,
+ <2 RK_PD5 2 &pcfg_pull_up_12ma>,
+ <2 RK_PD6 2 &pcfg_pull_up_12ma>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins =
+ <0 RK_PA7 2 &pcfg_pull_up_12ma>,
+ <2 RK_PD4 2 &pcfg_pull_up_12ma>,
+ <2 RK_PD5 2 &pcfg_pull_up_12ma>,
+ <2 RK_PD6 2 &pcfg_pull_up_12ma>,
+ <2 RK_PD7 2 &pcfg_pull_up_12ma>,
+ <3 RK_PC0 2 &pcfg_pull_up_12ma>,
+ <3 RK_PC1 2 &pcfg_pull_up_12ma>,
+ <3 RK_PC2 2 &pcfg_pull_up_12ma>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <2 RK_PA5 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwmir {
+ pwmir_pin: pwmir-pin {
+ rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>;
+ };
+ };
+
+ gmac-1 {
+ rgmiim1_pins: rgmiim1-pins {
+ rockchip,pins =
+ /* mac_txclk */
+ <1 RK_PB4 2 &pcfg_pull_none_12ma>,
+ /* mac_rxclk */
+ <1 RK_PB5 2 &pcfg_pull_none_2ma>,
+ /* mac_mdio */
+ <1 RK_PC3 2 &pcfg_pull_none_2ma>,
+ /* mac_txen */
+ <1 RK_PD1 2 &pcfg_pull_none_12ma>,
+ /* mac_clk */
+ <1 RK_PC5 2 &pcfg_pull_none_2ma>,
+ /* mac_rxdv */
+ <1 RK_PC6 2 &pcfg_pull_none_2ma>,
+ /* mac_mdc */
+ <1 RK_PC7 2 &pcfg_pull_none_2ma>,
+ /* mac_rxd1 */
+ <1 RK_PB2 2 &pcfg_pull_none_2ma>,
+ /* mac_rxd0 */
+ <1 RK_PB3 2 &pcfg_pull_none_2ma>,
+ /* mac_txd1 */
+ <1 RK_PB0 2 &pcfg_pull_none_12ma>,
+ /* mac_txd0 */
+ <1 RK_PB1 2 &pcfg_pull_none_12ma>,
+ /* mac_rxd3 */
+ <1 RK_PB6 2 &pcfg_pull_none_2ma>,
+ /* mac_rxd2 */
+ <1 RK_PB7 2 &pcfg_pull_none_2ma>,
+ /* mac_txd3 */
+ <1 RK_PC0 2 &pcfg_pull_none_12ma>,
+ /* mac_txd2 */
+ <1 RK_PC1 2 &pcfg_pull_none_12ma>,
+
+ /* mac_txclk */
+ <0 RK_PB0 1 &pcfg_pull_none>,
+ /* mac_txen */
+ <0 RK_PB4 1 &pcfg_pull_none>,
+ /* mac_clk */
+ <0 RK_PD0 1 &pcfg_pull_none>,
+ /* mac_txd1 */
+ <0 RK_PC0 1 &pcfg_pull_none>,
+ /* mac_txd0 */
+ <0 RK_PC1 1 &pcfg_pull_none>,
+ /* mac_txd3 */
+ <0 RK_PC7 1 &pcfg_pull_none>,
+ /* mac_txd2 */
+ <0 RK_PC6 1 &pcfg_pull_none>;
+ };
+
+ rmiim1_pins: rmiim1-pins {
+ rockchip,pins =
+ /* mac_mdio */
+ <1 RK_PC3 2 &pcfg_pull_none_2ma>,
+ /* mac_txen */
+ <1 RK_PD1 2 &pcfg_pull_none_12ma>,
+ /* mac_clk */
+ <1 RK_PC5 2 &pcfg_pull_none_2ma>,
+ /* mac_rxer */
+ <1 RK_PD0 2 &pcfg_pull_none_2ma>,
+ /* mac_rxdv */
+ <1 RK_PC6 2 &pcfg_pull_none_2ma>,
+ /* mac_mdc */
+ <1 RK_PC7 2 &pcfg_pull_none_2ma>,
+ /* mac_rxd1 */
+ <1 RK_PB2 2 &pcfg_pull_none_2ma>,
+ /* mac_rxd0 */
+ <1 RK_PB3 2 &pcfg_pull_none_2ma>,
+ /* mac_txd1 */
+ <1 RK_PB0 2 &pcfg_pull_none_12ma>,
+ /* mac_txd0 */
+ <1 RK_PB1 2 &pcfg_pull_none_12ma>,
+
+ /* mac_mdio */
+ <0 RK_PB3 1 &pcfg_pull_none>,
+ /* mac_txen */
+ <0 RK_PB4 1 &pcfg_pull_none>,
+ /* mac_clk */
+ <0 RK_PD0 1 &pcfg_pull_none>,
+ /* mac_mdc */
+ <0 RK_PC3 1 &pcfg_pull_none>,
+ /* mac_txd1 */
+ <0 RK_PC0 1 &pcfg_pull_none>,
+ /* mac_txd0 */
+ <0 RK_PC1 1 &pcfg_pull_none>;
+ };
+ };
+
+ gmac2phy {
+ fephyled_speed100: fephyled-speed100 {
+ rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
+ };
+
+ fephyled_speed10: fephyled-speed10 {
+ rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
+ };
+
+ fephyled_duplex: fephyled-duplex {
+ rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
+ };
+
+ fephyled_rxm0: fephyled-rxm0 {
+ rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>;
+ };
+
+ fephyled_txm0: fephyled-txm0 {
+ rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>;
+ };
+
+ fephyled_linkm0: fephyled-linkm0 {
+ rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
+ };
+
+ fephyled_rxm1: fephyled-rxm1 {
+ rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
+ };
+
+ fephyled_txm1: fephyled-txm1 {
+ rockchip,pins = <2 RK_PD1 3 &pcfg_pull_none>;
+ };
+
+ fephyled_linkm1: fephyled-linkm1 {
+ rockchip,pins = <2 RK_PD0 2 &pcfg_pull_none>;
+ };
+ };
+
+ tsadc_pin {
+ tsadc_int: tsadc-int {
+ rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
+ };
+ tsadc_gpio: tsadc-gpio {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hdmi_pin {
+ hdmi_cec: hdmi-cec {
+ rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
+ };
+
+ hdmi_hpd: hdmi-hpd {
+ rockchip,pins = <0 RK_PA4 1 &pcfg_pull_down>;
+ };
+ };
+
+ cif-0 {
+ dvp_d2d9_m0:dvp-d2d9-m0 {
+ rockchip,pins =
+ /* cif_d0 */
+ <3 RK_PA4 2 &pcfg_pull_none>,
+ /* cif_d1 */
+ <3 RK_PA5 2 &pcfg_pull_none>,
+ /* cif_d2 */
+ <3 RK_PA6 2 &pcfg_pull_none>,
+ /* cif_d3 */
+ <3 RK_PA7 2 &pcfg_pull_none>,
+ /* cif_d4 */
+ <3 RK_PB0 2 &pcfg_pull_none>,
+ /* cif_d5m0 */
+ <3 RK_PB1 2 &pcfg_pull_none>,
+ /* cif_d6m0 */
+ <3 RK_PB2 2 &pcfg_pull_none>,
+ /* cif_d7m0 */
+ <3 RK_PB3 2 &pcfg_pull_none>,
+ /* cif_href */
+ <3 RK_PA1 2 &pcfg_pull_none>,
+ /* cif_vsync */
+ <3 RK_PA0 2 &pcfg_pull_none>,
+ /* cif_clkoutm0 */
+ <3 RK_PA3 2 &pcfg_pull_none>,
+ /* cif_clkin */
+ <3 RK_PA2 2 &pcfg_pull_none>;
+ };
+ };
+
+ cif-1 {
+ dvp_d2d9_m1:dvp-d2d9-m1 {
+ rockchip,pins =
+ /* cif_d0 */
+ <3 RK_PA4 2 &pcfg_pull_none>,
+ /* cif_d1 */
+ <3 RK_PA5 2 &pcfg_pull_none>,
+ /* cif_d2 */
+ <3 RK_PA6 2 &pcfg_pull_none>,
+ /* cif_d3 */
+ <3 RK_PA7 2 &pcfg_pull_none>,
+ /* cif_d4 */
+ <3 RK_PB0 2 &pcfg_pull_none>,
+ /* cif_d5m1 */
+ <2 RK_PC0 4 &pcfg_pull_none>,
+ /* cif_d6m1 */
+ <2 RK_PC1 4 &pcfg_pull_none>,
+ /* cif_d7m1 */
+ <2 RK_PC2 4 &pcfg_pull_none>,
+ /* cif_href */
+ <3 RK_PA1 2 &pcfg_pull_none>,
+ /* cif_vsync */
+ <3 RK_PA0 2 &pcfg_pull_none>,
+ /* cif_clkoutm1 */
+ <2 RK_PB7 4 &pcfg_pull_none>,
+ /* cif_clkin */
+ <3 RK_PA2 2 &pcfg_pull_none>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 8cdb3bf..ff48edd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -53,7 +53,7 @@
};
memory@0 {
- reg = <0x0 0x0 0x0 0x80000000>;
+ reg = <0x0 0x0 0x0 0x40000000>;
device_type = "memory";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index a635adc..6d5dc05 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -108,23 +108,10 @@
};
};
- idle-states {
- entry-method = "psci";
-
- cpu_sleep: cpu-sleep-0 {
- compatible = "arm,idle-state";
- arm,psci-suspend-param = <0x1010000>;
- entry-latency-us = <0x3fffffff>;
- exit-latency-us = <0x40000000>;
- min-residency-us = <0xffffffff>;
- };
- };
-
cpu_l0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
- cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
#cooling-cells = <2>; /* min followed by max */
@@ -134,7 +121,6 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
- cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
};
@@ -142,7 +128,6 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
- cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
};
@@ -150,7 +135,6 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
- cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
};
@@ -158,7 +142,6 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x100>;
- cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
#cooling-cells = <2>; /* min followed by max */
@@ -168,7 +151,6 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x101>;
- cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
};
@@ -176,7 +158,6 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x102>;
- cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
};
@@ -184,11 +165,39 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x103>;
- cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
};
};
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dmac_peri: dma-controller@ff250000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff250000 0x0 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ clocks = <&cru ACLK_DMAC_PERI>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac_bus: dma-controller@ff600000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff600000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ clocks = <&cru ACLK_DMAC_BUS>;
+ clock-names = "apb_pclk";
+ };
+ };
+
arm-pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
@@ -237,6 +246,8 @@
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
status = "disabled";
};
@@ -249,6 +260,8 @@
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&cru SRST_SDIO0>;
+ reset-names = "reset";
status = "disabled";
};
@@ -261,6 +274,8 @@
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
@@ -631,6 +646,7 @@
clocks = <&cru PCLK_MAILBOX>;
clock-names = "pclk_mailbox";
#mbox-cells = <1>;
+ status = "disabled";
};
pmugrf: syscon@ff738000 {
@@ -684,6 +700,30 @@
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
};
+ i2s_2ch: i2s-2ch@ff890000 {
+ compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff890000 0x0 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
+ dmas = <&dmac_bus 6>, <&dmac_bus 7>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2s_8ch: i2s-8ch@ff898000 {
+ compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff898000 0x0 0x1000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S_8CH>, <&cru HCLK_I2S_8CH>;
+ dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_8ch_bus>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@ffb71000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -886,6 +926,20 @@
};
};
+ i2s {
+ i2s_8ch_bus: i2s-8ch-bus {
+ rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>,
+ <2 13 RK_FUNC_1 &pcfg_pull_none>,
+ <2 14 RK_FUNC_1 &pcfg_pull_none>,
+ <2 15 RK_FUNC_1 &pcfg_pull_none>,
+ <2 16 RK_FUNC_1 &pcfg_pull_none>,
+ <2 17 RK_FUNC_1 &pcfg_pull_none>,
+ <2 18 RK_FUNC_1 &pcfg_pull_none>,
+ <2 19 RK_FUNC_1 &pcfg_pull_none>,
+ <2 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
new file mode 100644
index 0000000..658bb9d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -0,0 +1,306 @@
+/*
+ * Google Gru-Kevin Rev 6+ board device tree source
+ *
+ * Copyright 2016-2017 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3399-gru.dtsi"
+#include <include/dt-bindings/input/linux-event-codes.h>
+
+/*
+ * Kevin-specific things
+ *
+ * Things in this section should use names from Kevin schematic since no
+ * equivalent exists in Gru schematic. If referring to signals that exist
+ * in Gru we use the Gru names, though. Confusing enough for you?
+ */
+/ {
+ model = "Google Kevin";
+ compatible = "google,kevin-rev15", "google,kevin-rev14",
+ "google,kevin-rev13", "google,kevin-rev12",
+ "google,kevin-rev11", "google,kevin-rev10",
+ "google,kevin-rev9", "google,kevin-rev8",
+ "google,kevin-rev7", "google,kevin-rev6",
+ "google,kevin", "google,gru", "rockchip,rk3399";
+
+ /* Power tree */
+
+ p3_3v_dig: p3-3v-dig {
+ compatible = "regulator-fixed";
+ regulator-name = "p3.3v_dig";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpu3_pen_pwr_en>;
+
+ enable-active-high;
+ gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&cros_ec_pwm 1>;
+ brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+ 17 18 19 20 21 22 23 24 25 26 27 28 29 30
+ 31 32 33 34 35 36 37 38 39 40 41 42 43 44
+ 45 46 47 48 49 50 51 52 53 54 55 56 57 58
+ 59 60 61 62 63 64 65 66 67 68 69 70 71 72
+ 73 74 75 76 77 78 79 80 81 82 83 84 85 86
+ 87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
+ default-brightness-level = <51>;
+ enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ power-supply = <&pp3300_disp>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ pwm-delay-us = <10000>;
+ };
+
+ thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu {
+ compatible = "murata,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <25500>;
+ pulldown-ohm = <0>;
+ io-channels = <&saradc 2>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor_ppvar_litcpu: thermistor-ppvar-litcpu {
+ compatible = "murata,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <25500>;
+ pulldown-ohm = <0>;
+ io-channels = <&saradc 3>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&gpio_keys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
+
+ pen-insert {
+ label = "Pen Insert";
+ /* Insert = low, eject = high */
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_PEN_INSERTED>;
+ linux,input-type = <EV_SW>;
+ wakeup-source;
+ };
+};
+
+&thermal_zones {
+ bigcpu_reg_thermal: bigcpu-reg-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&thermistor_ppvar_bigcpu 0>;
+ sustainable-power = <4000>;
+
+ ppvar_bigcpu_trips: trips {
+ ppvar_bigcpu_on: ppvar-bigcpu-on {
+ temperature = <40000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ ppvar_bigcpu_alert: ppvar-bigcpu-alert {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ ppvar_bigcpu_crit: ppvar-bigcpu-crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&ppvar_bigcpu_alert>;
+ cooling-device =
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ map1 {
+ trip = <&ppvar_bigcpu_alert>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <1024>;
+ };
+ };
+ };
+
+ litcpu_reg_thermal: litcpu-reg-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&thermistor_ppvar_litcpu 0>;
+ sustainable-power = <4000>;
+
+ ppvar_litcpu_trips: trips {
+ ppvar_litcpu_on: ppvar-litcpu-on {
+ temperature = <40000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ ppvar_litcpu_alert: ppvar-litcpu-alert {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ ppvar_litcpu_crit: ppvar-litcpu-crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ };
+};
+
+ap_i2c_tpm: &i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ /* These are relatively safe rise/fall times. */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ tpm: tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ powered-while-suspended;
+ };
+};
+
+ap_i2c_dig: &i2c2 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ /* These are relatively safe rise/fall times. */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ digitizer: digitizer@9 {
+ /* wacom,w9013 */
+ compatible = "hid-over-i2c";
+ reg = <0x9>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>;
+
+ vdd-supply = <&p3_3v_dig>;
+ post-power-on-delay-ms = <100>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+ hid-descr-addr = <0x1>;
+ };
+};
+
+/* Adjustments to things in the gru baseboard */
+
+&ap_i2c_tp {
+ trackpad@4a {
+ compatible = "atmel,atmel_mxt_tp";
+ reg = <0x4a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_int_l>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+};
+
+&ap_i2c_ts {
+ touchscreen@4b {
+ compatible = "atmel,atmel_mxt_ts";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_int_l>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&pp1800_ap_io>;
+};
+
+&mvl_wifi {
+ marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */
+};
+
+&pinctrl {
+ digitizer {
+ /* Has external pullup */
+ cpu1_dig_irq_l: cpu1-dig-irq-l {
+ rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ /* Has external pullup */
+ cpu1_dig_pdct_l: cpu1-dig-pdct-l {
+ rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ discrete-regulators {
+ cpu3_pen_pwr_en: cpu3-pen-pwr-en {
+ rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pen {
+ cpu1_pen_eject: cpu1-pen-eject {
+ rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ wlan_host_wake_l: wlan-host-wake-l {
+ rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
new file mode 100644
index 0000000..0d960b7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -0,0 +1,1103 @@
+/*
+ * Google Gru (and derivatives) board device tree source
+ *
+ * Copyright 2016-2017 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ /*
+ * Power Tree
+ *
+ * In general an attempt is made to include all rails called out by
+ * the schematic as long as those rails interact in some way with
+ * the AP. AKA:
+ * - Rails that only connect to the EC (or devices that the EC talks to)
+ * are not included.
+ * - Rails _are_ included if the rails go to the AP even if the AP
+ * doesn't currently care about them / they are always on. The idea
+ * here is that it makes it easier to map to the schematic or extend
+ * later.
+ *
+ * If two rails are substantially the same from the AP's point of
+ * view, though, we won't create a full fixed regulator. We'll just
+ * put the child rail as an alias of the parent rail. Sometimes rails
+ * look the same to the AP because one of these is true:
+ * - The EC controls the enable and the EC always enables a rail as
+ * long as the AP is running.
+ * - The rails are actually connected to each other by a jumper and
+ * the distinction is just there to add clarity/flexibility to the
+ * schematic.
+ */
+
+ ppvar_sys: ppvar-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pp900_ap: pp900-ap {
+ compatible = "regulator-fixed";
+ regulator-name = "pp900_ap";
+
+ /* EC turns on w/ pp900_ap_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp1200_lpddr: pp1200-lpddr {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1200_lpddr";
+
+ /* EC turns on w/ lpddr_pwr_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp1800: pp1800 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800";
+
+ /* Always on when ppvar_sys shows power good */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3000: pp3000 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp3000_en>;
+
+ enable-active-high;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3300: pp3300 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300";
+
+ /* Always on; plain and simple */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp5000: pp5000 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp5000";
+
+ /* EC turns on w/ pp5000_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ ppvar_bigcpu: ppvar-bigcpu {
+ compatible = "pwm-regulator";
+ regulator-name = "ppvar_bigcpu";
+ /*
+ * OVP circuit requires special handling which is not yet
+ * represented. Keep disabled for now.
+ */
+ status = "disabled";
+
+ pwms = <&pwm1 0 3337 0>;
+ pwm-supply = <&ppvar_sys>;
+ pwm-dutycycle-range = <100 0>;
+ pwm-dutycycle-unit = <100>;
+
+ /* EC turns on w/ ap_core_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <798674>;
+ regulator-max-microvolt = <1302172>;
+ };
+
+ ppvar_litcpu: ppvar-litcpu {
+ compatible = "pwm-regulator";
+ regulator-name = "ppvar_litcpu";
+ /*
+ * OVP circuit requires special handling which is not yet
+ * represented. Keep disabled for now.
+ */
+ status = "disabled";
+
+ pwms = <&pwm2 0 3337 0>;
+ pwm-supply = <&ppvar_sys>;
+ pwm-dutycycle-range = <100 0>;
+ pwm-dutycycle-unit = <100>;
+
+ /* EC turns on w/ ap_core_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <799065>;
+ regulator-max-microvolt = <1303738>;
+ };
+
+ ppvar_gpu: ppvar-gpu {
+ compatible = "pwm-regulator";
+ regulator-name = "ppvar_gpu";
+ /*
+ * OVP circuit requires special handling which is not yet
+ * represented. Keep disabled for now.
+ */
+ status = "disabled";
+
+ pwms = <&pwm0 0 3337 0>;
+ pwm-supply = <&ppvar_sys>;
+ pwm-dutycycle-range = <100 0>;
+ pwm-dutycycle-unit = <100>;
+
+ /* EC turns on w/ ap_core_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <785782>;
+ regulator-max-microvolt = <1217729>;
+ };
+
+ ppvar_centerlogic: ppvar-centerlogic {
+ compatible = "pwm-regulator";
+ regulator-name = "ppvar_centerlogic";
+ /*
+ * OVP circuit requires special handling which is not yet
+ * represented. Keep disabled for now.
+ */
+ status = "disabled";
+
+ pwms = <&pwm3 0 3337 0>;
+ pwm-supply = <&ppvar_sys>;
+ pwm-dutycycle-range = <100 0>;
+ pwm-dutycycle-unit = <100>;
+
+ /* EC turns on w/ ppvar_centerlogic_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800069>;
+ regulator-max-microvolt = <1049692>;
+ };
+
+ /* Schematics call this PPVAR even though it's fixed */
+ ppvar_logic: ppvar-logic {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_logic";
+
+ /* EC turns on w/ ppvar_logic_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* EC turns on w/ pp900_ddrpll_en */
+ pp900_ddrpll: pp900-ap {
+ };
+
+ /* EC turns on w/ pp900_pcie_en */
+ pp900_pcie: pp900-ap {
+ };
+
+ /* EC turns on w/ pp900_pll_en */
+ pp900_pll: pp900-ap {
+ };
+
+ /* EC turns on w/ pp900_pmu_en */
+ pp900_pmu: pp900-ap {
+ };
+
+ /* EC turns on w/ pp900_usb_en */
+ pp900_usb: pp900-ap {
+ };
+
+ /* EC turns on w/ pp1800_s0_en_l */
+ pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
+ };
+
+ /* EC turns on w/ pp1800_avdd_en_l */
+ pp1800_avdd: pp1800 {
+ };
+
+ /* EC turns on w/ pp1800_lid_en_l */
+ pp1800_lid: pp1800_mic: pp1800 {
+ };
+
+ /* EC turns on w/ lpddr_pwr_en */
+ pp1800_lpddr: pp1800 {
+ };
+
+ /* EC turns on w/ pp1800_pmu_en_l */
+ pp1800_pmu: pp1800 {
+ };
+
+ /* EC turns on w/ pp1800_usb_en_l */
+ pp1800_usb: pp1800 {
+ };
+
+ pp1500_ap_io: pp1500-ap-io {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1500_ap_io";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1500_en>;
+
+ enable-active-high;
+ gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ vin-supply = <&pp1800>;
+ };
+
+ pp1800_audio: pp1800-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_audio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1800_audio_en>;
+
+ enable-active-high;
+ gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&pp1800>;
+ };
+
+ /* gpio is shared with pp3300_wifi_bt */
+ pp1800_pcie: pp1800-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_pcie";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_module_pd_l>;
+
+ enable-active-high;
+ gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+ /*
+ * Need to wait 1ms + ramp-up time before we can power on WiFi.
+ * This has been approximated as 8ms total.
+ */
+ regulator-enable-ramp-delay = <8000>;
+
+ vin-supply = <&pp1800>;
+ };
+
+ /*
+ * This is a bit of a hack. The WiFi module should be reset at least
+ * 1ms after its regulators have ramped up (max rampup time is ~7ms).
+ * With some stretching of the imagination, we can call the 1.8V
+ * regulator a supply.
+ */
+ wlan_pd_n: wlan-pd-n {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan_pd_n";
+
+ /* Note the wlan_module_reset_l pinctrl */
+ enable-active-high;
+ gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+
+ vin-supply = <&pp1800_pcie>;
+ };
+
+ /* Always on; plain and simple */
+ pp3000_ap: pp3000_emmc: pp3000 {
+ };
+
+ pp3000_sd_slot: pp3000-sd-slot {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3000_sd_slot";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_slot_pwr_en>;
+
+ enable-active-high;
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+ vin-supply = <&pp3000>;
+ };
+
+ /*
+ * Technically, this is a small abuse of 'regulator-gpio'; this
+ * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are
+ * always on though, so it is sufficient to simply control the mux
+ * here.
+ */
+ ppvar_sd_card_io: ppvar-sd-card-io {
+ compatible = "regulator-gpio";
+ regulator-name = "ppvar_sd_card_io";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
+
+ enable-active-high;
+ enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3000000 0x0>;
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ /* EC turns on w/ pp3300_trackpad_en_l */
+ pp3300_trackpad: pp3300-trackpad {
+ };
+
+ /* EC turns on w/ pp3300_usb_en_l */
+ pp3300_usb: pp3300 {
+ };
+
+ pp3300_disp: pp3300-disp {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_disp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp3300_disp_en>;
+
+ enable-active-high;
+ gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+
+ startup-delay-us = <2000>;
+ vin-supply = <&pp3300>;
+ };
+
+ /* gpio is shared with pp1800_pcie and pinctrl is set there */
+ pp3300_wifi_bt: pp3300-wifi-bt {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_wifi_bt";
+
+ enable-active-high;
+ gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+ vin-supply = <&pp3300>;
+ };
+
+ /* EC turns on w/ usb_a_en */
+ pp5000_usb_a_vbus: pp5000 {
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>;
+
+ wake-on-bt {
+ label = "Wake-on-Bluetooth";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+
+ max98357a: max98357a {
+ compatible = "maxim,max98357a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmode_en>;
+ sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ sdmode-delay = <2>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+ };
+
+ sound {
+ compatible = "rockchip,rk3399-gru-sound";
+ rockchip,cpu = <&i2s0 &i2s2>;
+ rockchip,codec = <&max98357a &headsetcodec &codec>;
+ };
+};
+
+/*
+ * Set some suspend operating points to avoid OVP in suspend
+ *
+ * When we go into S3 ARM Trusted Firmware will transition our PWM regulators
+ * from wherever they're at back to the "default" operating point (whatever
+ * voltage we get when we set the PWM pins to "input").
+ *
+ * This quick transition under light load has the possibility to trigger the
+ * regulator "over voltage protection" (OVP).
+ *
+ * To make extra certain that we don't hit this OVP at suspend time, we'll
+ * transition to a voltage that's much closer to the default (~1.0 V) so that
+ * there will not be a big jump. Technically we only need to get within 200 mV
+ * of the default voltage, but the speed here should be fast enough and we need
+ * suspend/resume to be rock solid.
+ */
+
+&cluster0_opp {
+ opp05 {
+ opp-suspend;
+ };
+};
+
+&cluster1_opp {
+ opp06 {
+ opp-suspend;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&ppvar_bigcpu>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&ppvar_bigcpu>;
+};
+
+
+&cru {
+ assigned-clocks =
+ <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+ <&cru PLL_NPLL>,
+ <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+ <&cru PCLK_PERIHP>,
+ <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+ <&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+ <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
+ assigned-clock-rates =
+ <600000000>, <800000000>,
+ <1000000000>,
+ <150000000>, <75000000>,
+ <37500000>,
+ <100000000>, <100000000>,
+ <50000000>, <800000000>,
+ <100000000>, <50000000>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+ap_i2c_mic: &i2c1 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ /* These are relatively safe rise/fall times */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ headsetcodec: rt5514@57 {
+ compatible = "realtek,rt5514";
+ reg = <0x57>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mic_int>;
+ realtek,dmic-init-delay = <20>;
+ wakeup-source;
+ };
+};
+
+ap_i2c_ts: &i2c3 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ /* These are relatively safe rise/fall times */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+};
+
+ap_i2c_tp: &i2c5 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ /* These are relatively safe rise/fall times */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ /*
+ * Note strange pullup enable. Apparently this avoids leakage but
+ * still allows us to get nice 4.7K pullups for high speed i2c
+ * transfers. Basically we want the pullup on whenever the ap is
+ * alive, so the "en" pin just gets set to output high.
+ */
+ pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
+};
+
+ap_i2c_audio: &i2c8 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ /* These are relatively safe rise/fall times */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ codec: da7219@1a {
+ compatible = "dlg,da7219";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ dlg,micbias-lvl = <2600>;
+ dlg,mic-amp-in-sel = "diff";
+ pinctrl-names = "default";
+ pinctrl-0 = <&headset_int_l>;
+ VDD-supply = <&pp1800>;
+ VDDMIC-supply = <&pp3300>;
+ VDDIO-supply = <&pp1800>;
+
+ da7219_aad {
+ dlg,adc-1bit-rpt = <1>;
+ dlg,btn-avg = <4>;
+ dlg,btn-cfg = <50>;
+ dlg,mic-det-thr = <500>;
+ dlg,jack-ins-deb = <20>;
+ dlg,jack-det-rate = "32ms_64ms";
+ dlg,jack-rem-deb = <1>;
+
+ dlg,a-d-btn-thr = <0xa>;
+ dlg,d-b-btn-thr = <0x16>;
+ dlg,b-c-btn-thr = <0x21>;
+ dlg,c-mic-btn-thr = <0x3E>;
+ };
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ audio-supply = <&pp1800_audio>; /* APIO5_VDD; 3d 4a */
+ bt656-supply = <&pp1800_ap_io>; /* APIO2_VDD; 2a 2b */
+ gpio1830-supply = <&pp3000_ap>; /* APIO4_VDD; 4c 4d */
+ sdmmc-supply = <&ppvar_sd_card_io>; /* SDMMC0_VDD; 4b */
+};
+
+&pcie0 {
+ status = "okay";
+
+ ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>;
+ vpcie3v3-supply = <&pp3300_wifi_bt>;
+ vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */
+ vpcie0v9-supply = <&pp900_pcie>;
+
+ pci_rootport: pcie@0,0 {
+ reg = <0x83000000 0x0 0x00000000 0x0 0x00000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ mvl_wifi: wifi@0,0 {
+ compatible = "pci1b4b,2b42";
+ reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
+ 0x83010000 0x0 0x00100000 0x0 0x00100000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_host_wake_l>;
+ wakeup-source;
+ };
+ };
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pmu_io_domains {
+ status = "okay";
+
+ pmu1830-supply = <&pp1800_pmu>; /* PMUIO2_VDD */
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&sdhci {
+ /*
+ * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
+ * same (or nearly the same) performance for all eMMC that are intended
+ * to be used.
+ */
+ assigned-clock-rates = <150000000>;
+
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ status = "okay";
+
+ /*
+ * Note: configure "sdmmc_cd" as card detect even though it's actually
+ * hooked to ground. Because we specified "cd-gpios" below dw_mmc
+ * should be ignoring card detect anyway. Specifying the pin as
+ * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag)
+ * turned on that the system will still make sure the port is
+ * configured as SDMMC and not JTAG.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio
+ &sdmmc_bus4>;
+
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&pp3000_sd_slot>;
+ vqmmc-supply = <&ppvar_sd_card_io>;
+};
+
+&spi1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-1 = <&spi1_sleep>;
+
+ spiflash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* May run faster once verified. */
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+
+ wacky_spi_audio: spi2@0 {
+ compatible = "realtek,rt5514";
+ reg = <0>;
+
+ /* May run faster once verified. */
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&spi5 {
+ status = "okay";
+
+ cros_ec: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_ap_int_l>;
+ spi-max-frequency = <3000000>;
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cros_ec_pwm: ec-pwm {
+ compatible = "google,cros-ec-pwm";
+ #pwm-cells = <1>;
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy0_host {
+ status = "okay";
+};
+
+&u2phy1_host {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&pinctrl {
+ /*
+ * pinctrl settings for pins that have no real owners.
+ *
+ * At the moment settings are identical for S0 and S3, but if we later
+ * need to configure things differently for S3 we'll adjust here.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &ap_pwroff /* AP will auto-assert this when in S3 */
+ &clk_32k /* This pin is always 32k on gru boards */
+
+ /*
+ * We want this driven low ASAP; firmware should help us, but
+ * we can help ourselves too.
+ */
+ &wlan_module_reset_l
+ >;
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ backlight-enable {
+ bl_en: bl-en {
+ rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ cros-ec {
+ ec_ap_int_l: ec-ap-int-l {
+ rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ discrete-regulators {
+ pp1500_en: pp1500-en {
+ rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
+ &pcfg_pull_none>;
+ };
+
+ pp1800_audio_en: pp1800-audio-en {
+ rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
+ &pcfg_pull_down>;
+ };
+
+ pp3300_disp_en: pp3300-disp-en {
+ rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
+ &pcfg_pull_none>;
+ };
+
+ pp3000_en: pp3000-en {
+ rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
+ &pcfg_pull_none>;
+ };
+
+ sd_io_pwr_en: sd-io-pwr-en {
+ rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
+ &pcfg_pull_none>;
+ };
+
+ sd_pwr_1800_sel: sd-pwr-1800-sel {
+ rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO
+ &pcfg_pull_none>;
+ };
+
+ sd_slot_pwr_en: sd-slot-pwr-en {
+ rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
+ &pcfg_pull_none>;
+ };
+
+ wlan_module_pd_l: wlan-module-pd-l {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
+ &pcfg_pull_down>;
+ };
+ };
+
+ codec {
+ /* Has external pullup */
+ headset_int_l: headset-int-l {
+ rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ mic_int: mic-int {
+ rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ max98357a {
+ sdmode_en: sdmode-en {
+ rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ pcie {
+ pcie_clkreqn_cpm: pci-clkreqn-cpm {
+ /*
+ * Since our pcie doesn't support ClockPM(CPM), we want
+ * to hack this as gpio, so the EP could be able to
+ * de-assert it along and make ClockPM(CPM) work.
+ */
+ rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ /*
+ * We run sdmmc at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>,
+ <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>,
+ <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>,
+ <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ };
+
+ /*
+ * In our case the official card detect is hooked to ground
+ * to avoid getting access to JTAG just by sticking something
+ * in the SD card slot (see the force_jtag bit in the TRM).
+ *
+ * We still configure it as card detect because it doesn't
+ * hurt and dw_mmc will ignore it. We make sure to disable
+ * the pull though so we don't burn needless power.
+ */
+ sdmmc_cd: sdmcc-cd {
+ rockchip,pins =
+ <0 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ /* This is where we actually hook up CD; has external pull */
+ sdmmc_cd_gpio: sdmmc-cd-gpio {
+ rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ spi1 {
+ spi1_sleep: spi1-sleep {
+ /*
+ * Pull down SPI1 CLK/CS/RX/TX during suspend, to
+ * prevent leakage.
+ */
+ rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 10 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 7 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 8 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ touchscreen {
+ touch_int_l: touch-int-l {
+ rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ touch_reset_l: touch-reset-l {
+ rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ trackpad {
+ ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
+ rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+
+ trackpad_int_l: trackpad-int-l {
+ rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ wifi_perst_l: wifi-perst-l {
+ rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wlan_module_reset_l: wlan-module-reset-l {
+ /*
+ * We want this driven low ASAP (As {Soon,Strongly} As
+ * Possible), to avoid leakage through the powered-down
+ * WiFi.
+ */
+ rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ /* Kevin has an external pull up, but Gru does not */
+ rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ write-protect {
+ ap_fw_wp: ap-fw-wp {
+ rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
new file mode 100644
index 0000000..dd82e16
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ cluster0_opp: opp-table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <800000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <875000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <925000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1050000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1512000000>;
+ opp-microvolt = <1125000>;
+ };
+ };
+
+ cluster1_opp: opp-table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <875000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <950000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <1250000>;
+ };
+ };
+};
+
+&cpu_l0 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+ operating-points-v2 = <&cluster1_opp>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 8e6d1bd..f4f3c96 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -211,6 +211,51 @@
};
};
+ pcie0: pcie@f8000000 {
+ compatible = "rockchip,rk3399-pcie";
+ reg = <0x0 0xf8000000 0x0 0x2000000>,
+ <0x0 0xfd000000 0x0 0x1000000>;
+ reg-names = "axi-base", "apb-base";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ aspm-no-l0s;
+ bus-range = <0x0 0x1>;
+ clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+ <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+ clock-names = "aclk", "aclk-perf",
+ "hclk", "pm";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "legacy", "client";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+ <0 0 0 2 &pcie0_intc 1>,
+ <0 0 0 3 &pcie0_intc 2>,
+ <0 0 0 4 &pcie0_intc 3>;
+ linux,pci-domain = <0>;
+ max-link-speed = <1>;
+ msi-map = <0x0 &its 0x0 0x1000>;
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+ 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+ resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+ <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+ <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+ <&cru SRST_A_PCIE>;
+ reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+ "pm", "pclk", "aclk";
+ status = "disabled";
+
+ pcie0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
gmac: ethernet@fe300000 {
compatible = "rockchip,rk3399-gmac";
reg = <0x0 0xfe300000 0x0 0x10000>;
@@ -241,6 +286,8 @@
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
+ resets = <&cru SRST_SDIO0>;
+ reset-names = "reset";
status = "disabled";
};
@@ -255,6 +302,8 @@
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
power-domains = <&power RK3399_PD_SD>;
+ resets = <&cru SRST_SDMMC>;
+ reset-names = "reset";
status = "disabled";
};
@@ -275,50 +324,6 @@
status = "disabled";
};
- pcie0: pcie@f8000000 {
- compatible = "rockchip,rk3399-pcie";
- reg = <0x0 0xf8000000 0x0 0x2000000>,
- <0x0 0xfd000000 0x0 0x1000000>;
- reg-names = "axi-base", "apb-base";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- aspm-no-l0s;
- bus-range = <0x0 0x1>;
- clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
- <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
- clock-names = "aclk", "aclk-perf",
- "hclk", "pm";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "legacy", "client";
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie0_intc 0>,
- <0 0 0 2 &pcie0_intc 1>,
- <0 0 0 3 &pcie0_intc 2>,
- <0 0 0 4 &pcie0_intc 3>;
- max-link-speed = <1>;
- msi-map = <0x0 &its 0x0 0x1000>;
- phys = <&pcie_phy>;
- phy-names = "pcie-phy";
- ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
- 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
- resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
- <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
- <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
- <&cru SRST_A_PCIE>;
- reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
- "pm", "pclk", "aclk";
- status = "disabled";
-
- pcie0_intc: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
- };
-
usb_host0_ehci: usb@fe380000 {
compatible = "generic-ehci";
reg = <0x0 0xfe380000 0x0 0x20000>;
@@ -371,6 +376,60 @@
status = "disabled";
};
+ usbdrd3_0: usb@fe800000 {
+ compatible = "rockchip,rk3399-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+ <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "grf_clk";
+ status = "disabled";
+
+ usbdrd_dwc3_0: dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe800000 0x0 0x100000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+ dr_mode = "otg";
+ phys = <&u2phy0_otg>;
+ phy-names = "usb2-phy";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ status = "disabled";
+ };
+ };
+
+ usbdrd3_1: usb@fe900000 {
+ compatible = "rockchip,rk3399-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+ <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "grf_clk";
+ status = "disabled";
+
+ usbdrd_dwc3_1: dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe900000 0x0 0x100000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+ dr_mode = "otg";
+ phys = <&u2phy1_otg>;
+ phy-names = "usb2-phy";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller@fee00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <4>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index 7168cf8..0173e93 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -52,11 +52,6 @@
model = "UniPhier LD11 Reference Board";
compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
- memory {
- device_type = "memory";
- reg = <0 0x80000000 0 0x40000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -73,6 +68,11 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x40000000>;
+ };
};
ðsc {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index da881f5..151c043 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -140,7 +140,7 @@
<1 10 4>;
};
- soc {
+ soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -304,6 +304,8 @@
compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
reg = <0x5a000000 0x400>;
interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sys_clk 4>;
bus-width = <8>;
mmc-ddr-1_8v;
@@ -318,7 +320,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
- resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
+ resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+ <&mio_rst 12>;
};
usb1: usb@5a810100 {
@@ -329,7 +332,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
- resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
+ resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+ <&mio_rst 13>;
};
usb2: usb@5a820100 {
@@ -340,7 +344,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
- resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
+ resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+ <&mio_rst 14>;
};
mioctrl@5b3e0000 {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 609162a..fca4c47 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -52,11 +52,6 @@
model = "UniPhier LD20 Reference Board";
compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
- memory {
- device_type = "memory";
- reg = <0 0x80000000 0 0xc0000000>;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
@@ -73,6 +68,11 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
};
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0xc0000000>;
+ };
};
ðsc {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index a6b3a70..6193f11 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -209,7 +209,7 @@
<1 10 4>;
};
- soc {
+ soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -378,6 +378,8 @@
compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
reg = <0x5a000000 0x400>;
interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sys_clk 4>;
bus-width = <8>;
mmc-ddr-1_8v;
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index b658c5e..f0535e6 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb
+dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
+ sp9860g-1h10.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
new file mode 100644
index 0000000..7b7d8ce
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -0,0 +1,569 @@
+/*
+ * Spreadtrum SC9860 SoC
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "whale2.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ CPU0: cpu@530000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530000>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU1: cpu@530001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530001>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU2: cpu@530002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530002>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU3: cpu@530003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530003>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU4: cpu@530100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU5: cpu@530101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU6: cpu@530102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530102>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU7: cpu@530103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530103>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+ };
+
+ idle-states{
+ entry-method = "arm,psci";
+
+ CORE_PD: core_pd {
+ compatible = "arm,idle-state";
+ entry-latency-us = <1000>;
+ exit-latency-us = <700>;
+ min-residency-us = <2500>;
+ local-timer-stop;
+ arm,psci-suspend-param = <0x00010002>;
+ };
+
+ CLUSTER_PD: cluster_pd {
+ compatible = "arm,idle-state";
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ local-timer-stop;
+ arm,psci-suspend-param = <0x01010003>;
+ };
+ };
+
+ gic: interrupt-controller@12001000 {
+ compatible = "arm,gic-400";
+ reg = <0 0x12001000 0 0x1000>,
+ <0 0x12002000 0 0x2000>,
+ <0 0x12004000 0 0x2000>,
+ <0 0x12006000 0 0x2000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CPU0>,
+ <&CPU1>,
+ <&CPU2>,
+ <&CPU3>,
+ <&CPU4>,
+ <&CPU5>,
+ <&CPU6>,
+ <&CPU7>;
+ };
+
+ soc {
+ funnel@10001000 { /* SoC Funnel */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x10001000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ soc_funnel_out_port: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ soc_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&main_funnel_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <4>;
+ soc_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpioint =
+ <&stm_out_port>;
+ };
+ };
+ };
+ };
+
+ etb@10003000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x10003000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&soc_funnel_out_port>;
+ };
+ };
+ };
+
+ stm@10006000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0 0x10006000 0 0x1000>,
+ <0 0x01000000 0 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port1>;
+ };
+ };
+ };
+
+ funnel@11001000 { /* Cluster0 Funnel */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster0_funnel_out_port: endpoint {
+ remote-endpoint =
+ <&cluster0_etf_in>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ cluster0_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ cluster0_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ cluster0_funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ cluster0_funnel_in_port3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+ };
+
+ funnel@11002000 { /* Cluster1 Funnel */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x11002000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster1_funnel_out_port: endpoint {
+ remote-endpoint =
+ <&cluster1_etf_in>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ cluster1_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm4_out>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ cluster1_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm5_out>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ cluster1_funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm6_out>;
+ };
+ };
+
+ port@4 {
+ reg = <3>;
+ cluster1_funnel_in_port3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm7_out>;
+ };
+ };
+ };
+ };
+
+ etf@11003000 { /* ETF on Cluster0 */
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x11003000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster0_etf_out: endpoint {
+ remote-endpoint =
+ <&main_funnel_in_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ cluster0_etf_in: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&cluster0_funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ etf@11004000 { /* ETF on Cluster1 */
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x11004000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster1_etf_out: endpoint {
+ remote-endpoint =
+ <&main_funnel_in_port1>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ cluster1_etf_in: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&cluster1_funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ funnel@11005000 { /* Main Funnel */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x11005000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ main_funnel_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ main_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&cluster0_etf_out>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ main_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&cluster1_etf_out>;
+ };
+ };
+ };
+ };
+
+ etm@11440000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11440000 0 0x1000>;
+ cpu = <&CPU0>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port0>;
+ };
+ };
+ };
+
+ etm@11540000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11540000 0 0x1000>;
+ cpu = <&CPU1>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port1>;
+ };
+ };
+ };
+
+ etm@11640000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11640000 0 0x1000>;
+ cpu = <&CPU2>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port2>;
+ };
+ };
+ };
+
+ etm@11740000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11740000 0 0x1000>;
+ cpu = <&CPU3>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port3>;
+ };
+ };
+ };
+
+ etm@11840000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11840000 0 0x1000>;
+ cpu = <&CPU4>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port0>;
+ };
+ };
+ };
+
+ etm@11940000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11940000 0 0x1000>;
+ cpu = <&CPU5>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port1>;
+ };
+ };
+ };
+
+ etm@11a40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11a40000 0 0x1000>;
+ cpu = <&CPU6>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port2>;
+ };
+ };
+ };
+
+ etm@11b40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11b40000 0 0x1000>;
+ cpu = <&CPU7>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port3>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
new file mode 100644
index 0000000..ae0b28c
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -0,0 +1,56 @@
+/*
+ * Spreadtrum SP9860g board
+ *
+ * Copyright (C) 2017, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "sc9860.dtsi"
+
+/ {
+ model = "Spreadtrum SP9860G 3GFHD Board";
+
+ compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
+
+ aliases {
+ serial0 = &uart0; /* for Bluetooth */
+ serial1 = &uart1; /* UART console */
+ serial2 = &uart2; /* Reserved */
+ serial3 = &uart3; /* for GPS */
+ };
+
+ memory{
+ device_type = "memory";
+ reg = <0x0 0x80000000 0 0x60000000>,
+ <0x1 0x80000000 0 0x60000000>;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
new file mode 100644
index 0000000..7c217c5
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Spreadtrum Whale2 platform peripherals
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ap-apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x70000000 0x10000000>;
+
+ uart0: serial@0 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart1: serial@100000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x100000 0x100>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart2: serial@200000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x200000 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart3: serial@300000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x300000 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+ };
+
+ };
+
+ ext_26m: ext-26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "ext_26m";
+ };
+};
diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
index e164ff6..bb900d2 100644
--- a/arch/arm64/boot/dts/zte/zx296718-evb.dts
+++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts
@@ -57,6 +57,34 @@
reg = <0x40000000 0x40000000>;
};
+ sound0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "zx_snd_spdif0";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+ };
+};
+
+&emmc {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&sd1 {
+ status = "okay";
+};
+
+&spdif0 {
+ status = "okay";
};
&uart0 {
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index b850b2c..316dc71 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -235,13 +235,6 @@
clock-output-names = "pll_mac";
};
- pll_vga: clk-pll-1073m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1073000000>;
- clock-output-names = "pll_vga";
- };
-
pll_mm0: clk-pll-1188m {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -305,6 +298,51 @@
status = "disabled";
};
+ sd0: mmc@1110000 {
+ compatible = "zte,zx296718-dw-mshc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01110000 0x1000>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ fifo-depth = <32>;
+ data-addr = <0x200>;
+ fifo-watermark-aligned;
+ bus-width = <4>;
+ clock-frequency = <50000000>;
+ clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
+ clock-names = "biu", "ciu";
+ num-slots = <1>;
+ max-frequency = <50000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ status = "disabled";
+ };
+
+ sd1: mmc@1111000 {
+ compatible = "zte,zx296718-dw-mshc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01111000 0x1000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ fifo-depth = <32>;
+ data-addr = <0x200>;
+ fifo-watermark-aligned;
+ bus-width = <4>;
+ clock-frequency = <167000000>;
+ clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>;
+ clock-names = "biu", "ciu";
+ num-slots = <1>;
+ max-frequency = <167000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
dma: dma-controller@1460000 {
compatible = "zte,zx296702-dma";
reg = <0x01460000 0x1000>;
@@ -328,6 +366,47 @@
#clock-cells = <1>;
};
+ vou: vou@1440000 {
+ compatible = "zte,zx296718-vou";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1440000 0x10000>;
+
+ dpc: dpc@0 {
+ compatible = "zte,zx296718-dpc";
+ reg = <0x0000 0x1000>, <0x1000 0x1000>,
+ <0x5000 0x1000>, <0x6000 0x1000>,
+ <0xa000 0x1000>;
+ reg-names = "osd", "timing_ctrl",
+ "dtrc", "vou_ctrl",
+ "otfppu";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>,
+ <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>;
+ clock-names = "aclk", "ppu_wclk",
+ "main_wclk", "aux_wclk";
+ };
+
+ hdmi: hdmi@c000 {
+ compatible = "zte,zx296718-hdmi";
+ reg = <0xc000 0x4000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&topcrm HDMI_OSC_CEC>,
+ <&topcrm HDMI_OSC_CLK>,
+ <&topcrm HDMI_XCLK>;
+ clock-names = "osc_cec", "osc_clk", "xclk";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ tvenc: tvenc@2000 {
+ compatible = "zte,zx296718-tvenc";
+ reg = <0x2000 0x1000>;
+ zte,tvenc-power-control = <&sysctrl 0x170 0x10>;
+ status = "disabled";
+ };
+ };
+
topcrm: clock-controller@1461000 {
compatible = "zte,zx296718-topcrm";
reg = <0x01461000 0x1000>;
@@ -339,10 +418,43 @@
reg = <0x1463000 0x1000>;
};
+ emmc: mmc@1470000{
+ compatible = "zte,zx296718-dw-mshc";
+ reg = <0x01470000 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ zte,aon-syscon = <&aon_sysctrl>;
+ bus-width = <8>;
+ fifo-depth = <128>;
+ data-addr = <0x200>;
+ fifo-watermark-aligned;
+ clock-frequency = <167000000>;
+ clocks = <&topcrm EMMC_NAND_AHB>, <&topcrm EMMC_WCLK>;
+ clock-names = "biu", "ciu";
+ max-frequency = <167000000>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ disable-wp;
+ status = "disabled";
+ };
+
audiocrm: clock-controller@1480000 {
compatible = "zte,zx296718-audiocrm";
reg = <0x01480000 0x1000>;
#clock-cells = <1>;
};
+
+ spdif0: spdif@1488000 {
+ compatible = "zte,zx296702-spdif";
+ reg = <0x1488000 0x1000>;
+ clocks = <&audiocrm AUDIO_SPDIF0_WCLK>;
+ clock-names = "tx";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ #sound-dai-cells = <0>;
+ dmas = <&dma 30>;
+ dma-names = "tx";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 927ee18..ce07285 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -186,6 +186,8 @@
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
+CONFIG_MVPP2=y
+CONFIG_MVNETA=y
CONFIG_SKY2=y
CONFIG_RAVB=y
CONFIG_SMC91X=y
@@ -250,8 +252,10 @@
CONFIG_I2C_IMX=y
CONFIG_I2C_MESON=y
CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_PXA=y
CONFIG_I2C_QUP=y
CONFIG_I2C_RK3X=y
+CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
@@ -300,6 +304,7 @@
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
+CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_MAX77620=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SPMI_PMIC=y
@@ -325,10 +330,20 @@
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_DVB_NET is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_VIDEO_RENESAS_FCP=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_DRM=m
CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_EXYNOS=m
+CONFIG_DRM_EXYNOS5433_DECON=y
+CONFIG_DRM_EXYNOS7_DECON=y
+CONFIG_DRM_EXYNOS_DSI=y
+# CONFIG_DRM_EXYNOS_DP is not set
+CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_EXYNOS_MIC=y
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_RCAR_HDMI=y
CONFIG_DRM_RCAR_LVDS=y
@@ -399,11 +414,15 @@
CONFIG_MMC_DW_K3=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
@@ -470,6 +489,7 @@
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_ARM_SCPI_PROTOCOL=y
@@ -519,6 +539,7 @@
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index a12f1afc..a7a97a6 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -29,6 +29,7 @@
generic-y += segment.h
generic-y += sembuf.h
generic-y += serial.h
+generic-y += set_memory.h
generic-y += shmbuf.h
generic-y += simd.h
generic-y += sizes.h
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index 728f933..d74a284 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -150,10 +150,6 @@ static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
{
}
-int set_memory_ro(unsigned long addr, int numpages);
-int set_memory_rw(unsigned long addr, int numpages);
-int set_memory_x(unsigned long addr, int numpages);
-int set_memory_nx(unsigned long addr, int numpages);
int set_memory_valid(unsigned long addr, unsigned long size, int enable);
#endif
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 0c00c87..35b2e50 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -173,6 +173,16 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
#define iounmap __iounmap
/*
+ * PCI configuration space mapping function.
+ *
+ * The PCI specification disallows posted write configuration transactions.
+ * Add an arch specific pci_remap_cfgspace() definition that is implemented
+ * through nGnRnE device memory attribute as recommended by the ARM v8
+ * Architecture reference manual Issue A.k B2.8.2 "Device memory".
+ */
+#define pci_remap_cfgspace(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRnE))
+
+/*
* io{read,write}{16,32,64}be() macros
*/
#define ioread16be(p) ({ __u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
diff --git a/arch/arm64/include/asm/pci.h b/arch/arm64/include/asm/pci.h
index b9a7ba9..1fc1974 100644
--- a/arch/arm64/include/asm/pci.h
+++ b/arch/arm64/include/asm/pci.h
@@ -22,6 +22,8 @@
*/
#define PCI_DMA_BUS_IS_PHYS (0)
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE 1
+
extern int isa_dma_bridge_buggy;
#ifdef CONFIG_PCI
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 4dac4af..3216e09 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -28,6 +28,7 @@
#include <linux/dma-contiguous.h>
#include <linux/vmalloc.h>
#include <linux/swiotlb.h>
+#include <linux/pci.h>
#include <asm/cacheflush.h>
@@ -879,34 +880,26 @@ static const struct dma_map_ops iommu_dma_ops = {
.mapping_error = iommu_dma_mapping_error,
};
-/*
- * TODO: Right now __iommu_setup_dma_ops() gets called too early to do
- * everything it needs to - the device is only partially created and the
- * IOMMU driver hasn't seen it yet, so it can't have a group. Thus we
- * need this delayed attachment dance. Once IOMMU probe ordering is sorted
- * to move the arch_setup_dma_ops() call later, all the notifier bits below
- * become unnecessary, and will go away.
- */
-struct iommu_dma_notifier_data {
- struct list_head list;
- struct device *dev;
- const struct iommu_ops *ops;
- u64 dma_base;
- u64 size;
-};
-static LIST_HEAD(iommu_dma_masters);
-static DEFINE_MUTEX(iommu_dma_notifier_lock);
-
-static bool do_iommu_attach(struct device *dev, const struct iommu_ops *ops,
- u64 dma_base, u64 size)
+static int __init __iommu_dma_init(void)
{
- struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
+ return iommu_dma_init();
+}
+arch_initcall(__iommu_dma_init);
+
+static void __iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ const struct iommu_ops *ops)
+{
+ struct iommu_domain *domain;
+
+ if (!ops)
+ return;
/*
- * If the IOMMU driver has the DMA domain support that we require,
- * then the IOMMU core will have already configured a group for this
- * device, and allocated the default domain for that group.
+ * The IOMMU core code allocates the default DMA domain, which the
+ * underlying IOMMU driver needs to support via the dma-iommu layer.
*/
+ domain = iommu_get_domain_for_dev(dev);
+
if (!domain)
goto out_err;
@@ -917,109 +910,11 @@ static bool do_iommu_attach(struct device *dev, const struct iommu_ops *ops,
dev->dma_ops = &iommu_dma_ops;
}
- return true;
+ return;
+
out_err:
- pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n",
+ pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n",
dev_name(dev));
- return false;
-}
-
-static void queue_iommu_attach(struct device *dev, const struct iommu_ops *ops,
- u64 dma_base, u64 size)
-{
- struct iommu_dma_notifier_data *iommudata;
-
- iommudata = kzalloc(sizeof(*iommudata), GFP_KERNEL);
- if (!iommudata)
- return;
-
- iommudata->dev = dev;
- iommudata->ops = ops;
- iommudata->dma_base = dma_base;
- iommudata->size = size;
-
- mutex_lock(&iommu_dma_notifier_lock);
- list_add(&iommudata->list, &iommu_dma_masters);
- mutex_unlock(&iommu_dma_notifier_lock);
-}
-
-static int __iommu_attach_notifier(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct iommu_dma_notifier_data *master, *tmp;
-
- if (action != BUS_NOTIFY_BIND_DRIVER)
- return 0;
-
- mutex_lock(&iommu_dma_notifier_lock);
- list_for_each_entry_safe(master, tmp, &iommu_dma_masters, list) {
- if (data == master->dev && do_iommu_attach(master->dev,
- master->ops, master->dma_base, master->size)) {
- list_del(&master->list);
- kfree(master);
- break;
- }
- }
- mutex_unlock(&iommu_dma_notifier_lock);
- return 0;
-}
-
-static int __init register_iommu_dma_ops_notifier(struct bus_type *bus)
-{
- struct notifier_block *nb = kzalloc(sizeof(*nb), GFP_KERNEL);
- int ret;
-
- if (!nb)
- return -ENOMEM;
-
- nb->notifier_call = __iommu_attach_notifier;
-
- ret = bus_register_notifier(bus, nb);
- if (ret) {
- pr_warn("Failed to register DMA domain notifier; IOMMU DMA ops unavailable on bus '%s'\n",
- bus->name);
- kfree(nb);
- }
- return ret;
-}
-
-static int __init __iommu_dma_init(void)
-{
- int ret;
-
- ret = iommu_dma_init();
- if (!ret)
- ret = register_iommu_dma_ops_notifier(&platform_bus_type);
- if (!ret)
- ret = register_iommu_dma_ops_notifier(&amba_bustype);
-#ifdef CONFIG_PCI
- if (!ret)
- ret = register_iommu_dma_ops_notifier(&pci_bus_type);
-#endif
- return ret;
-}
-arch_initcall(__iommu_dma_init);
-
-static void __iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
- const struct iommu_ops *ops)
-{
- struct iommu_group *group;
-
- if (!ops)
- return;
- /*
- * TODO: As a concession to the future, we're ready to handle being
- * called both early and late (i.e. after bus_add_device). Once all
- * the platform bus code is reworked to call us late and the notifier
- * junk above goes away, move the body of do_iommu_attach here.
- */
- group = iommu_group_get(dev);
- if (group) {
- do_iommu_attach(dev, ops, dma_base, size);
- iommu_group_put(group);
- } else {
- queue_iommu_attach(dev, ops, dma_base, size);
- }
}
void arch_teardown_dma_ops(struct device *dev)
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index 3212ee0..a682a0a 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -17,6 +17,7 @@
#include <linux/vmalloc.h>
#include <asm/pgtable.h>
+#include <asm/set_memory.h>
#include <asm/tlbflush.h>
struct page_change_data {
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index d68abde..c6e5358 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -27,6 +27,7 @@
#include <asm/byteorder.h>
#include <asm/cacheflush.h>
#include <asm/debug-monitors.h>
+#include <asm/set_memory.h>
#include "bpf_jit.h"
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index 212266a..394c2a73 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -14,28 +14,6 @@ void pcibios_set_master(struct pci_dev *dev)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long prot;
-
- /* Leave vm_pgoff as-is, the PCI space address is the physical
- * address on this platform.
- */
- prot = pgprot_val(vma->vm_page_prot);
- vma->vm_page_prot = __pgprot(prot);
-
- /* Write-combine setting is ignored, it is changed via the mtrr
- * interfaces on this platform.
- */
- if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot))
- return -EAGAIN;
-
- return 0;
-}
-
resource_size_t
pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h
index b1b289d..6e50533 100644
--- a/arch/cris/include/asm/pci.h
+++ b/arch/cris/include/asm/pci.h
@@ -42,9 +42,7 @@ struct pci_dev;
#define PCI_DMA_BUS_IS_PHYS (1)
#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
-
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#endif /* __KERNEL__ */
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index c0835b0..6459f2d 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -51,8 +51,9 @@ extern unsigned long ia64_max_iommu_merge_mask;
#define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL)
#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
+#define arch_can_pci_mmap_wc() 1
+
#define HAVE_PCI_LEGACY
extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
struct vm_area_struct *vma,
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index 2955f35..75859a0 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -27,28 +27,6 @@ static int kdump_freeze_monarch;
static int kdump_on_init = 1;
static int kdump_on_fatal_mca = 1;
-static inline Elf64_Word
-*append_elf_note(Elf64_Word *buf, char *name, unsigned type, void *data,
- size_t data_len)
-{
- struct elf_note *note = (struct elf_note *)buf;
- note->n_namesz = strlen(name) + 1;
- note->n_descsz = data_len;
- note->n_type = type;
- buf += (sizeof(*note) + 3)/4;
- memcpy(buf, name, note->n_namesz);
- buf += (note->n_namesz + 3)/4;
- memcpy(buf, data, data_len);
- buf += (data_len + 3)/4;
- return buf;
-}
-
-static void
-final_note(void *buf)
-{
- memset(buf, 0, sizeof(struct elf_note));
-}
-
extern void ia64_dump_cpu_regs(void *);
static DEFINE_PER_CPU(struct elf_prstatus, elf_prstatus);
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 8f6ac2f..4068bde 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -418,52 +418,6 @@ pcibios_align_resource (void *data, const struct resource *res,
return res->start;
}
-int
-pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long size = vma->vm_end - vma->vm_start;
- pgprot_t prot;
-
- /*
- * I/O space cannot be accessed via normal processor loads and
- * stores on this platform.
- */
- if (mmap_state == pci_mmap_io)
- /*
- * XXX we could relax this for I/O spaces for which ACPI
- * indicates that the space is 1-to-1 mapped. But at the
- * moment, we don't support multiple PCI address spaces and
- * the legacy I/O space is not 1-to-1 mapped, so this is moot.
- */
- return -EINVAL;
-
- if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
- return -EINVAL;
-
- prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size,
- vma->vm_page_prot);
-
- /*
- * If the user requested WC, the kernel uses UC or WC for this region,
- * and the chipset supports WC, we can use WC. Otherwise, we have to
- * use the same attribute the kernel uses.
- */
- if (write_combine &&
- ((pgprot_val(prot) & _PAGE_MA_MASK) == _PAGE_MA_UC ||
- (pgprot_val(prot) & _PAGE_MA_MASK) == _PAGE_MA_WC) &&
- efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
- else
- vma->vm_page_prot = prot;
-
- if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start, vma->vm_page_prot))
- return -EAGAIN;
-
- return 0;
-}
-
/**
* ia64_pci_get_legacy_mem - generic legacy mem routine
* @bus: bus to get legacy memory base address for
diff --git a/arch/m68k/ifpsp060/src/ilsp.S b/arch/m68k/ifpsp060/src/ilsp.S
index 970abaf..dd5b2c3 100644
--- a/arch/m68k/ifpsp060/src/ilsp.S
+++ b/arch/m68k/ifpsp060/src/ilsp.S
@@ -776,7 +776,7 @@
# ALGORITHM *********************************************************** #
# In the interest of simplicity, all operands are converted to #
# longword size whether the operation is byte, word, or long. The #
-# bounds are sign extended accordingly. If Rn is a data regsiter, Rn is #
+# bounds are sign extended accordingly. If Rn is a data register, Rn is #
# also sign extended. If Rn is an address register, it need not be sign #
# extended since the full register is always used. #
# The condition codes are set correctly before the final "rts". #
diff --git a/arch/m68k/ifpsp060/src/isp.S b/arch/m68k/ifpsp060/src/isp.S
index b865c1a..29a9f86 100644
--- a/arch/m68k/ifpsp060/src/isp.S
+++ b/arch/m68k/ifpsp060/src/isp.S
@@ -1876,7 +1876,7 @@
# word, or longword sized operands. Then, in the interest of #
# simplicity, all operands are converted to longword size whether the #
# operation is byte, word, or long. The bounds are sign extended #
-# accordingly. If Rn is a data regsiter, Rn is also sign extended. If #
+# accordingly. If Rn is a data register, Rn is also sign extended. If #
# Rn is an address register, it need not be sign extended since the #
# full register is always used. #
# The comparisons are made and the condition codes calculated. #
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index 2a120bb..efd4983 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -46,12 +46,10 @@ extern int pci_domain_nr(struct pci_bus *bus);
extern int pci_proc_domain(struct pci_bus *bus);
struct vm_area_struct;
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP 1
+#define HAVE_PCI_MMAP 1
+#define arch_can_pci_mmap_io() 1
extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
size_t count);
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 13bc932..404fb38 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -278,7 +278,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
*
* Returns a negative error code on failure, zero on success.
*/
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+int pci_mmap_page_range(struct pci_dev *dev, int bar, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
resource_size_t offset =
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index ba4753c..d18ed5a 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -152,7 +152,7 @@ static int __cvmx_helper_errata_asx_pass1(int interface, int port,
}
/**
- * Configure all of the ASX, GMX, and PKO regsiters required
+ * Configure all of the ASX, GMX, and PKO registers required
* to get RGMII to function on the supplied interface.
*
* @interface: PKO Interface to configure (0 or 1)
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index 4e1761e..d88eb7a6 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -88,7 +88,7 @@ void __init which_prom(s32 magic, s32 *prom_vec)
void __init prom_init(void)
{
extern void dec_machine_halt(void);
- static char cpu_msg[] __initdata =
+ static const char cpu_msg[] __initconst =
"Sorry, this kernel is compiled for a wrong CPU type!\n";
s32 argc = fw_arg0;
s32 *argv = (void *)fw_arg1;
@@ -111,7 +111,7 @@ void __init prom_init(void)
#if defined(CONFIG_CPU_R3000)
if ((current_cpu_type() == CPU_R4000SC) ||
(current_cpu_type() == CPU_R4400SC)) {
- static char r4k_msg[] __initdata =
+ static const char r4k_msg[] __initconst =
"Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
printk(cpu_msg);
printk(r4k_msg);
@@ -122,7 +122,7 @@ void __init prom_init(void)
#if defined(CONFIG_CPU_R4X00)
if ((current_cpu_type() == CPU_R3000) ||
(current_cpu_type() == CPU_R3000A)) {
- static char r3k_msg[] __initdata =
+ static const char r3k_msg[] __initconst =
"Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
printk(cpu_msg);
printk(r3k_msg);
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
index f89775b..f7a95d7 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
@@ -55,7 +55,7 @@ extern int __cvmx_helper_rgmii_probe(int interface);
extern void cvmx_helper_rgmii_internal_loopback(int port);
/**
- * Configure all of the ASX, GMX, and PKO regsiters required
+ * Configure all of the ASX, GMX, and PKO registers required
* to get RGMII to function on the supplied interface.
*
* @interface: PKO Interface to configure (0 or 1)
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 30d1129..1000c1b 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -110,10 +110,7 @@ extern unsigned long PCIBIOS_MIN_MEM;
extern void pcibios_set_master(struct pci_dev *dev);
#define HAVE_PCI_MMAP
-
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
-
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#define HAVE_ARCH_PCI_RESOURCE_TO_USER
/*
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 9452b02..313a88b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -618,7 +618,7 @@ static int mipspmu_event_init(struct perf_event *event)
return -ENOENT;
}
- if (event->cpu >= nr_cpumask_bits ||
+ if ((unsigned int)event->cpu >= nr_cpumask_bits ||
(event->cpu >= 0 && !cpu_online(event->cpu)))
return -ENODEV;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b49e7bf..9681b58 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2256,8 +2256,8 @@ void set_handler(unsigned long offset, void *addr, unsigned long size)
local_flush_icache_range(ebase + offset, ebase + offset + size);
}
-static char panic_null_cerr[] =
- "Trying to set NULL cache error exception handler";
+static const char panic_null_cerr[] =
+ "Trying to set NULL cache error exception handler\n";
/*
* Install uncached CPU exception handler.
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index f6325fa..bd67ac7 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -57,27 +57,3 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
*start = fixup_bigphys_addr(rsrc->start, size);
*end = rsrc->start + size;
}
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long prot;
-
- /*
- * I/O space can be accessed via normal processor loads and stores on
- * this platform but for now we elect not to do this and portable
- * drivers should not do this anyway.
- */
- if (mmap_state == pci_mmap_io)
- return -EINVAL;
-
- /*
- * Ignore write-combine; for now only return uncached mappings.
- */
- prot = pgprot_val(vma->vm_page_prot);
- prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
- vma->vm_page_prot = __pgprot(prot);
-
- return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start, vma->vm_page_prot);
-}
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index 51159ff..d276549 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -74,9 +74,7 @@ static inline int pci_controller_num(struct pci_dev *dev)
}
#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#endif /* __KERNEL__ */
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
index b7ab837..e0f4617 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.c
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -210,26 +210,3 @@ void __init pcibios_resource_survey(void)
pcibios_allocate_resources(0);
pcibios_allocate_resources(1);
}
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long prot;
-
- /* Leave vm_pgoff as-is, the PCI space address is the physical
- * address on this platform.
- */
- vma->vm_flags |= VM_LOCKED;
-
- prot = pgprot_val(vma->vm_page_prot);
- prot &= ~_PAGE_CACHE;
- vma->vm_page_prot = __pgprot(prot);
-
- /* Write-combine setting is ignored */
- if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot))
- return -EAGAIN;
-
- return 0;
-}
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
index defebd9..1de1a3f 100644
--- a/arch/parisc/include/asm/pci.h
+++ b/arch/parisc/include/asm/pci.h
@@ -200,8 +200,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
}
#define HAVE_PCI_MMAP
-
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#endif /* __ASM_PARISC_PCI_H */
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index ad4cb16..a4fd296 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -1369,7 +1369,7 @@
/*
When there is no translation for the probe address then we
- must nullify the insn and return zero in the target regsiter.
+ must nullify the insn and return zero in the target register.
This will indicate to the calling code that it does not have
write/read privileges to this address.
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index c66c943..f1a7693 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -218,7 +218,7 @@ void *module_alloc(unsigned long size)
* easier than trying to map the text, data, init_text and
* init_data correctly */
return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END,
- GFP_KERNEL | __GFP_HIGHMEM,
+ GFP_KERNEL,
PAGE_KERNEL_RWX, 0, NUMA_NO_NODE,
__builtin_return_address(0));
}
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 0903c6a..13ee356 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -227,34 +227,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
return start;
}
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long prot;
-
- /*
- * I/O space can be accessed via normal processor loads and stores on
- * this platform but for now we elect not to do this and portable
- * drivers should not do this anyway.
- */
- if (mmap_state == pci_mmap_io)
- return -EINVAL;
-
- if (write_combine)
- return -EINVAL;
-
- /*
- * Ignore write-combine; for now only return uncached mappings.
- */
- prot = pgprot_val(vma->vm_page_prot);
- prot |= _PAGE_NO_CACHE;
- vma->vm_page_prot = __pgprot(prot);
-
- return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start, vma->vm_page_prot);
-}
-
/*
* A driver is enabling the device. We make sure that all the appropriate
* bits are set to allow the device to operate as the driver is expecting.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index f07f727..d8834e8 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -571,21 +571,23 @@
relocation code.
config CRASH_DUMP
- bool "Build a kdump crash kernel"
+ bool "Build a dump capture kernel"
depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
select RELOCATABLE if PPC64 || 44x || FSL_BOOKE
help
- Build a kernel suitable for use as a kdump capture kernel.
+ Build a kernel suitable for use as a dump capture kernel.
The same kernel binary can be used as production kernel and dump
capture kernel.
config FA_DUMP
bool "Firmware-assisted dump"
- depends on PPC64 && PPC_RTAS && CRASH_DUMP && KEXEC_CORE
+ depends on PPC64 && PPC_RTAS
+ select CRASH_CORE
+ select CRASH_DUMP
help
A robust mechanism to get reliable kernel crash dump with
assistance from firmware. This approach does not use kexec,
- instead firmware assists in booting the kdump kernel
+ instead firmware assists in booting the capture kernel
while preserving memory contents. Firmware-assisted dump
is meant to be a kdump replacement offering robustness and
speed not possible without system firmware assistance.
diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
index 0031806..60b9108 100644
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -73,6 +73,8 @@
reg_entry++; \
})
+extern int crashing_cpu;
+
/* Kernel Dump section info */
struct fadump_section {
__be32 request_flag;
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 5011b69..f90b22c 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -173,6 +173,8 @@ struct machdep_calls {
/* Called after scan and before resource survey */
void (*pcibios_fixup_phb)(struct pci_controller *hose);
+ resource_size_t (*pcibios_default_alignment)(void);
+
#ifdef CONFIG_PCI_IOV
void (*pcibios_fixup_sriov)(struct pci_dev *pdev);
resource_size_t (*pcibios_iov_resource_alignment)(struct pci_dev *, int resno);
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 93eded8..c8975da 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -77,12 +77,11 @@ extern int pci_domain_nr(struct pci_bus *bus);
extern int pci_proc_domain(struct pci_bus *bus);
struct vm_area_struct;
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
-/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP 1
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() and it does WC */
+#define HAVE_PCI_MMAP 1
+#define arch_can_pci_mmap_io() 1
+#define arch_can_pci_mmap_wc() 1
extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
size_t count);
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 47b63de..cbabb5a 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -43,8 +43,6 @@
#define IPI_TIMEOUT 10000
#define REAL_MODE_TIMEOUT 10000
-/* This keeps a track of which one is the crashing cpu. */
-int crashing_cpu = -1;
static int time_to_dump;
#define CRASH_HANDLER_MAX 3
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 243dbef..466569e 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -209,14 +209,20 @@ static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm,
*/
static inline unsigned long fadump_calculate_reserve_size(void)
{
- unsigned long size;
+ int ret;
+ unsigned long long base, size;
/*
- * Check if the size is specified through fadump_reserve_mem= cmdline
- * option. If yes, then use that.
+ * Check if the size is specified through crashkernel= cmdline
+ * option. If yes, then use that but ignore base as fadump
+ * reserves memory at end of RAM.
*/
- if (fw_dump.reserve_bootvar)
+ ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
+ &size, &base);
+ if (ret == 0 && size > 0) {
+ fw_dump.reserve_bootvar = (unsigned long)size;
return fw_dump.reserve_bootvar;
+ }
/* divide by 20 to get 5% of value */
size = memblock_end_of_DRAM() / 20;
@@ -371,15 +377,6 @@ static int __init early_fadump_param(char *p)
}
early_param("fadump", early_fadump_param);
-/* Look for fadump_reserve_mem= cmdline option */
-static int __init early_fadump_reserve_mem(char *p)
-{
- if (p)
- fw_dump.reserve_bootvar = memparse(p, &p);
- return 0;
-}
-early_param("fadump_reserve_mem", early_fadump_reserve_mem);
-
static void register_fw_dump(struct fadump_mem_struct *fdm)
{
int rc;
@@ -527,34 +524,6 @@ fadump_read_registers(struct fadump_reg_entry *reg_entry, struct pt_regs *regs)
return reg_entry;
}
-static u32 *fadump_append_elf_note(u32 *buf, char *name, unsigned type,
- void *data, size_t data_len)
-{
- struct elf_note note;
-
- note.n_namesz = strlen(name) + 1;
- note.n_descsz = data_len;
- note.n_type = type;
- memcpy(buf, ¬e, sizeof(note));
- buf += (sizeof(note) + 3)/4;
- memcpy(buf, name, note.n_namesz);
- buf += (note.n_namesz + 3)/4;
- memcpy(buf, data, note.n_descsz);
- buf += (note.n_descsz + 3)/4;
-
- return buf;
-}
-
-static void fadump_final_note(u32 *buf)
-{
- struct elf_note note;
-
- note.n_namesz = 0;
- note.n_descsz = 0;
- note.n_type = 0;
- memcpy(buf, ¬e, sizeof(note));
-}
-
static u32 *fadump_regs_to_elf_notes(u32 *buf, struct pt_regs *regs)
{
struct elf_prstatus prstatus;
@@ -565,8 +534,8 @@ static u32 *fadump_regs_to_elf_notes(u32 *buf, struct pt_regs *regs)
* prstatus.pr_pid = ????
*/
elf_core_copy_kernel_regs(&prstatus.pr_reg, regs);
- buf = fadump_append_elf_note(buf, KEXEC_CORE_NOTE_NAME, NT_PRSTATUS,
- &prstatus, sizeof(prstatus));
+ buf = append_elf_note(buf, CRASH_CORE_NOTE_NAME, NT_PRSTATUS,
+ &prstatus, sizeof(prstatus));
return buf;
}
@@ -707,7 +676,7 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
note_buf = fadump_regs_to_elf_notes(note_buf, ®s);
}
}
- fadump_final_note(note_buf);
+ final_note(note_buf);
if (fdh) {
pr_debug("Updating elfcore header (%llx) with cpu notes\n",
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index ffda24a..341a746 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -233,6 +233,14 @@ void pcibios_reset_secondary_bus(struct pci_dev *dev)
pci_reset_secondary_bus(dev);
}
+resource_size_t pcibios_default_alignment(void)
+{
+ if (ppc_md.pcibios_default_alignment)
+ return ppc_md.pcibios_default_alignment();
+
+ return 0;
+}
+
#ifdef CONFIG_PCI_IOV
resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev, int resno)
{
@@ -513,7 +521,8 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
*
* Returns a negative error code on failure, zero on success.
*/
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+int pci_mmap_page_range(struct pci_dev *dev, int bar,
+ struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
resource_size_t offset =
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 5c10b59..69e0771 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -125,6 +125,11 @@ int ppc_do_canonicalize_irqs;
EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
#endif
+#ifdef CONFIG_CRASH_CORE
+/* This keeps a track of which one is the crashing cpu. */
+int crashing_cpu = -1;
+#endif
+
/* also used by kexec */
void machine_shutdown(void)
{
diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c
index 915412e..1fa794d 100644
--- a/arch/powerpc/mm/icswx.c
+++ b/arch/powerpc/mm/icswx.c
@@ -186,7 +186,7 @@ static u32 acop_get_inst(struct pt_regs *regs)
}
/**
- * @regs: regsiters at time of interrupt
+ * @regs: registers at time of interrupt
* @address: storage address
* @error_code: Fault code, usually the DSISR or ESR depending on
* processor type
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 6fdbd38..283caf1 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -3330,6 +3330,11 @@ static void pnv_pci_setup_bridge(struct pci_bus *bus, unsigned long type)
}
}
+static resource_size_t pnv_pci_default_alignment(void)
+{
+ return PAGE_SIZE;
+}
+
#ifdef CONFIG_PCI_IOV
static resource_size_t pnv_pci_iov_resource_alignment(struct pci_dev *pdev,
int resno)
@@ -3863,6 +3868,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
hose->controller_ops = pnv_pci_ioda_controller_ops;
}
+ ppc_md.pcibios_default_alignment = pnv_pci_default_alignment;
+
#ifdef CONFIG_PCI_IOV
ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment;
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index 7e3481e..45092b1 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -1,4 +1,5 @@
generic-y += asm-offsets.h
+generic-y += cacheflush.h
generic-y += clkdev.h
generic-y += dma-contiguous.h
generic-y += div64.h
diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/set_memory.h
similarity index 79%
rename from arch/s390/include/asm/cacheflush.h
rename to arch/s390/include/asm/set_memory.h
index 0499334..46a4db4 100644
--- a/arch/s390/include/asm/cacheflush.h
+++ b/arch/s390/include/asm/set_memory.h
@@ -1,8 +1,5 @@
-#ifndef _S390_CACHEFLUSH_H
-#define _S390_CACHEFLUSH_H
-
-/* Caches aren't brain-dead on the s390. */
-#include <asm-generic/cacheflush.h>
+#ifndef _ASMS390_SET_MEMORY_H
+#define _ASMS390_SET_MEMORY_H
#define SET_MEMORY_RO 1UL
#define SET_MEMORY_RW 2UL
@@ -31,4 +28,4 @@ static inline int set_memory_x(unsigned long addr, int numpages)
return __set_memory(addr, numpages, SET_MEMORY_X);
}
-#endif /* _S390_CACHEFLUSH_H */
+#endif
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 60a8a4e..27477f3 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -17,6 +17,7 @@
#include <trace/syscall.h>
#include <asm/asm-offsets.h>
#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include "entry.h"
/*
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 76f9eda..3d6a997 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -31,7 +31,7 @@
#include <linux/slab.h>
#include <linux/hardirq.h>
#include <linux/ftrace.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/sections.h>
#include <linux/uaccess.h>
#include <asm/dis.h>
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index db5658d..49a6bd4 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -26,6 +26,7 @@
#include <asm/asm-offsets.h>
#include <asm/cacheflush.h>
#include <asm/os_info.h>
+#include <asm/set_memory.h>
#include <asm/switch_to.h>
#include <asm/nmi.h>
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 9a4f279..ca960d0 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -823,7 +823,7 @@ static int cpumsf_pmu_event_init(struct perf_event *event)
}
/* Check online status of the CPU to which the event is pinned */
- if (event->cpu >= nr_cpumask_bits ||
+ if ((unsigned int)event->cpu >= nr_cpumask_bits ||
(event->cpu >= 0 && !cpu_online(event->cpu)))
return -ENODEV;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index aeb3feb..689ac48 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1204,10 +1204,7 @@ static long kvm_s390_get_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
if (args->count < 1 || args->count > KVM_S390_SKEYS_MAX)
return -EINVAL;
- keys = kmalloc_array(args->count, sizeof(uint8_t),
- GFP_KERNEL | __GFP_NOWARN);
- if (!keys)
- keys = vmalloc(sizeof(uint8_t) * args->count);
+ keys = kvmalloc_array(args->count, sizeof(uint8_t), GFP_KERNEL);
if (!keys)
return -ENOMEM;
@@ -1249,10 +1246,7 @@ static long kvm_s390_set_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
if (args->count < 1 || args->count > KVM_S390_SKEYS_MAX)
return -EINVAL;
- keys = kmalloc_array(args->count, sizeof(uint8_t),
- GFP_KERNEL | __GFP_NOWARN);
- if (!keys)
- keys = vmalloc(sizeof(uint8_t) * args->count);
+ keys = kvmalloc_array(args->count, sizeof(uint8_t), GFP_KERNEL);
if (!keys)
return -ENOMEM;
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index ee506671..ee6a1d3 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -39,6 +39,7 @@
#include <asm/sections.h>
#include <asm/ctl_reg.h>
#include <asm/sclp.h>
+#include <asm/set_memory.h>
pgd_t swapper_pg_dir[PTRS_PER_PGD] __section(.bss..swapper_pg_dir);
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index fc321c5..49e721f 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -8,6 +8,7 @@
#include <asm/facility.h>
#include <asm/pgtable.h>
#include <asm/page.h>
+#include <asm/set_memory.h>
static inline unsigned long sske_frame(unsigned long addr, unsigned char skey)
{
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 60d3899..c33c94b 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -17,6 +17,7 @@
#include <asm/setup.h>
#include <asm/tlbflush.h>
#include <asm/sections.h>
+#include <asm/set_memory.h>
static DEFINE_MUTEX(vmem_mutex);
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 4ecf6d6..6e97a2e 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -24,6 +24,7 @@
#include <linux/bpf.h>
#include <asm/cacheflush.h>
#include <asm/dis.h>
+#include <asm/set_memory.h>
#include "bpf_jit.h"
int bpf_jit_enable __read_mostly;
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 84563e3..c99ee28 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -269,27 +269,6 @@ void __ref pcibios_report_status(unsigned int status_mask, int warn)
}
}
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- /*
- * I/O space can be accessed via normal processor loads and stores on
- * this platform but for now we elect not to do this and portable
- * drivers should not do this anyway.
- */
- if (mmap_state == pci_mmap_io)
- return -EINVAL;
-
- /*
- * Ignore write-combine; for now only return uncached mappings.
- */
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-}
-
#ifndef CONFIG_GENERIC_IOMAP
void __iomem *__pci_ioport_map(struct pci_dev *dev,
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 644314f..17fa69b 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -66,8 +66,8 @@ extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
struct pci_dev;
#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
+
extern void pcibios_set_master(struct pci_dev *dev);
/* Dynamic DMA mapping stuff.
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 2303635..b957ca5 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -42,13 +42,10 @@ static inline int pci_proc_domain(struct pci_bus *bus)
/* Platform support for /proc/bus/pci/X/Y mmap()s. */
#define HAVE_PCI_MMAP
+#define arch_can_pci_mmap_io() 1
#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
#define get_pci_unmapped_area get_fb_unmapped_area
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine);
-
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return PCI_IRQ_NONE;
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index 4410119..41a4073 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -939,3 +939,9 @@
retl
mov %o1, %o0
ENDPROC(__retl_o1)
+
+ENTRY(__retl_o1_asi)
+ wr %o5, 0x0, %asi
+ retl
+ mov %o1, %o0
+ENDPROC(__retl_o1_asi)
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index 44a3ed9..e278bf5 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -70,16 +70,9 @@ static ssize_t led_proc_write(struct file *file, const char __user *buffer,
if (count > LED_MAX_LENGTH)
count = LED_MAX_LENGTH;
- buf = kmalloc(sizeof(char) * (count + 1), GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- if (copy_from_user(buf, buffer, count)) {
- kfree(buf);
- return -EFAULT;
- }
-
- buf[count] = '\0';
+ buf = memdup_user_nul(buffer, count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
/* work around \n when echo'ing into proc */
if (buf[count - 1] == '\n')
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 015e55a..7eceaa1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -862,9 +862,9 @@ static void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vm
*
* Returns a negative error code on failure, zero on success.
*/
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine)
+int pci_mmap_page_range(struct pci_dev *dev, int bar,
+ struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
{
int ret;
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 6f06058..6722308 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -148,7 +148,7 @@ static void __init boot_flags_init(char *commands)
{
while (*commands) {
/* Move to the start of the next "argument". */
- while (*commands && *commands == ' ')
+ while (*commands == ' ')
commands++;
/* Process any command switches, otherwise skip it. */
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 6b7331d..422b178 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -133,7 +133,7 @@ static void __init boot_flags_init(char *commands)
{
while (*commands) {
/* Move to the start of the next "argument". */
- while (*commands && *commands == ' ')
+ while (*commands == ' ')
commands++;
/* Process any command switches, otherwise skip it. */
diff --git a/arch/sparc/lib/GENbzero.S b/arch/sparc/lib/GENbzero.S
index 8e7a843..2fbf629 100644
--- a/arch/sparc/lib/GENbzero.S
+++ b/arch/sparc/lib/GENbzero.S
@@ -8,7 +8,7 @@
98: x,y; \
.section __ex_table,"a";\
.align 4; \
- .word 98b, __retl_o1; \
+ .word 98b, __retl_o1_asi;\
.text; \
.align 4;
diff --git a/arch/sparc/lib/NGbzero.S b/arch/sparc/lib/NGbzero.S
index beab29b..33053bd 100644
--- a/arch/sparc/lib/NGbzero.S
+++ b/arch/sparc/lib/NGbzero.S
@@ -8,7 +8,7 @@
98: x,y; \
.section __ex_table,"a";\
.align 4; \
- .word 98b, __retl_o1; \
+ .word 98b, __retl_o1_asi;\
.text; \
.align 4;
diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h
index 37e55d0..ac5acdf 100644
--- a/arch/unicore32/include/asm/pci.h
+++ b/arch/unicore32/include/asm/pci.h
@@ -17,8 +17,7 @@
#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#endif /* __KERNEL__ */
#endif
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index 62137d1..1053bca 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -356,26 +356,3 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
}
return 0;
}
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long phys;
-
- if (mmap_state == pci_mmap_io)
- return -EINVAL;
-
- phys = vma->vm_pgoff;
-
- /*
- * Mark this as IO
- */
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- if (remap_pfn_range(vma, vma->vm_start, phys,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot))
- return -EAGAIN;
-
- return 0;
-}
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index e7e1942..8b4140f 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -5,93 +5,8 @@
#include <asm-generic/cacheflush.h>
#include <asm/special_insns.h>
-/*
- * The set_memory_* API can be used to change various attributes of a virtual
- * address range. The attributes include:
- * Cachability : UnCached, WriteCombining, WriteThrough, WriteBack
- * Executability : eXeutable, NoteXecutable
- * Read/Write : ReadOnly, ReadWrite
- * Presence : NotPresent
- *
- * Within a category, the attributes are mutually exclusive.
- *
- * The implementation of this API will take care of various aspects that
- * are associated with changing such attributes, such as:
- * - Flushing TLBs
- * - Flushing CPU caches
- * - Making sure aliases of the memory behind the mapping don't violate
- * coherency rules as defined by the CPU in the system.
- *
- * What this API does not do:
- * - Provide exclusion between various callers - including callers that
- * operation on other mappings of the same physical page
- * - Restore default attributes when a page is freed
- * - Guarantee that mappings other than the requested one are
- * in any state, other than that these do not violate rules for
- * the CPU you have. Do not depend on any effects on other mappings,
- * CPUs other than the one you have may have more relaxed rules.
- * The caller is required to take care of these.
- */
-
-int _set_memory_uc(unsigned long addr, int numpages);
-int _set_memory_wc(unsigned long addr, int numpages);
-int _set_memory_wt(unsigned long addr, int numpages);
-int _set_memory_wb(unsigned long addr, int numpages);
-int set_memory_uc(unsigned long addr, int numpages);
-int set_memory_wc(unsigned long addr, int numpages);
-int set_memory_wt(unsigned long addr, int numpages);
-int set_memory_wb(unsigned long addr, int numpages);
-int set_memory_x(unsigned long addr, int numpages);
-int set_memory_nx(unsigned long addr, int numpages);
-int set_memory_ro(unsigned long addr, int numpages);
-int set_memory_rw(unsigned long addr, int numpages);
-int set_memory_np(unsigned long addr, int numpages);
-int set_memory_4k(unsigned long addr, int numpages);
-
-int set_memory_array_uc(unsigned long *addr, int addrinarray);
-int set_memory_array_wc(unsigned long *addr, int addrinarray);
-int set_memory_array_wt(unsigned long *addr, int addrinarray);
-int set_memory_array_wb(unsigned long *addr, int addrinarray);
-
-int set_pages_array_uc(struct page **pages, int addrinarray);
-int set_pages_array_wc(struct page **pages, int addrinarray);
-int set_pages_array_wt(struct page **pages, int addrinarray);
-int set_pages_array_wb(struct page **pages, int addrinarray);
-
-/*
- * For legacy compatibility with the old APIs, a few functions
- * are provided that work on a "struct page".
- * These functions operate ONLY on the 1:1 kernel mapping of the
- * memory that the struct page represents, and internally just
- * call the set_memory_* function. See the description of the
- * set_memory_* function for more details on conventions.
- *
- * These APIs should be considered *deprecated* and are likely going to
- * be removed in the future.
- * The reason for this is the implicit operation on the 1:1 mapping only,
- * making this not a generally useful API.
- *
- * Specifically, many users of the old APIs had a virtual address,
- * called virt_to_page() or vmalloc_to_page() on that address to
- * get a struct page* that the old API required.
- * To convert these cases, use set_memory_*() on the original
- * virtual address, do not use these functions.
- */
-
-int set_pages_uc(struct page *page, int numpages);
-int set_pages_wb(struct page *page, int numpages);
-int set_pages_x(struct page *page, int numpages);
-int set_pages_nx(struct page *page, int numpages);
-int set_pages_ro(struct page *page, int numpages);
-int set_pages_rw(struct page *page, int numpages);
-
-
void clflush_cache_range(void *addr, unsigned int size);
#define mmio_flush_range(addr, size) clflush_cache_range(addr, size)
-extern int kernel_set_to_readonly;
-void set_kernel_text_rw(void);
-void set_kernel_text_ro(void);
-
#endif /* _ASM_X86_CACHEFLUSH_H */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 1411dbe..f513cc2 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -7,6 +7,7 @@
#include <linux/string.h>
#include <linux/scatterlist.h>
#include <asm/io.h>
+#include <asm/pat.h>
#include <asm/x86_init.h>
#ifdef __KERNEL__
@@ -102,10 +103,8 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine);
-
+#define arch_can_pci_mmap_wc() pat_enabled()
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
#ifdef CONFIG_PCI
extern void early_quirks(void);
diff --git a/arch/x86/include/asm/set_memory.h b/arch/x86/include/asm/set_memory.h
new file mode 100644
index 0000000..eaec6c3
--- /dev/null
+++ b/arch/x86/include/asm/set_memory.h
@@ -0,0 +1,87 @@
+#ifndef _ASM_X86_SET_MEMORY_H
+#define _ASM_X86_SET_MEMORY_H
+
+#include <asm/page.h>
+#include <asm-generic/set_memory.h>
+
+/*
+ * The set_memory_* API can be used to change various attributes of a virtual
+ * address range. The attributes include:
+ * Cachability : UnCached, WriteCombining, WriteThrough, WriteBack
+ * Executability : eXeutable, NoteXecutable
+ * Read/Write : ReadOnly, ReadWrite
+ * Presence : NotPresent
+ *
+ * Within a category, the attributes are mutually exclusive.
+ *
+ * The implementation of this API will take care of various aspects that
+ * are associated with changing such attributes, such as:
+ * - Flushing TLBs
+ * - Flushing CPU caches
+ * - Making sure aliases of the memory behind the mapping don't violate
+ * coherency rules as defined by the CPU in the system.
+ *
+ * What this API does not do:
+ * - Provide exclusion between various callers - including callers that
+ * operation on other mappings of the same physical page
+ * - Restore default attributes when a page is freed
+ * - Guarantee that mappings other than the requested one are
+ * in any state, other than that these do not violate rules for
+ * the CPU you have. Do not depend on any effects on other mappings,
+ * CPUs other than the one you have may have more relaxed rules.
+ * The caller is required to take care of these.
+ */
+
+int _set_memory_uc(unsigned long addr, int numpages);
+int _set_memory_wc(unsigned long addr, int numpages);
+int _set_memory_wt(unsigned long addr, int numpages);
+int _set_memory_wb(unsigned long addr, int numpages);
+int set_memory_uc(unsigned long addr, int numpages);
+int set_memory_wc(unsigned long addr, int numpages);
+int set_memory_wt(unsigned long addr, int numpages);
+int set_memory_wb(unsigned long addr, int numpages);
+int set_memory_np(unsigned long addr, int numpages);
+int set_memory_4k(unsigned long addr, int numpages);
+
+int set_memory_array_uc(unsigned long *addr, int addrinarray);
+int set_memory_array_wc(unsigned long *addr, int addrinarray);
+int set_memory_array_wt(unsigned long *addr, int addrinarray);
+int set_memory_array_wb(unsigned long *addr, int addrinarray);
+
+int set_pages_array_uc(struct page **pages, int addrinarray);
+int set_pages_array_wc(struct page **pages, int addrinarray);
+int set_pages_array_wt(struct page **pages, int addrinarray);
+int set_pages_array_wb(struct page **pages, int addrinarray);
+
+/*
+ * For legacy compatibility with the old APIs, a few functions
+ * are provided that work on a "struct page".
+ * These functions operate ONLY on the 1:1 kernel mapping of the
+ * memory that the struct page represents, and internally just
+ * call the set_memory_* function. See the description of the
+ * set_memory_* function for more details on conventions.
+ *
+ * These APIs should be considered *deprecated* and are likely going to
+ * be removed in the future.
+ * The reason for this is the implicit operation on the 1:1 mapping only,
+ * making this not a generally useful API.
+ *
+ * Specifically, many users of the old APIs had a virtual address,
+ * called virt_to_page() or vmalloc_to_page() on that address to
+ * get a struct page* that the old API required.
+ * To convert these cases, use set_memory_*() on the original
+ * virtual address, do not use these functions.
+ */
+
+int set_pages_uc(struct page *page, int numpages);
+int set_pages_wb(struct page *page, int numpages);
+int set_pages_x(struct page *page, int numpages);
+int set_pages_nx(struct page *page, int numpages);
+int set_pages_ro(struct page *page, int numpages);
+int set_pages_rw(struct page *page, int numpages);
+
+extern int kernel_set_to_readonly;
+void set_kernel_text_rw(void);
+void set_kernel_text_ro(void);
+
+#endif /* _ASM_X86_SET_MEMORY_H */
diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c
index df083ef..815dd63 100644
--- a/arch/x86/kernel/amd_gart_64.c
+++ b/arch/x86/kernel/amd_gart_64.c
@@ -36,7 +36,7 @@
#include <asm/proto.h>
#include <asm/iommu.h>
#include <asm/gart.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/swiotlb.h>
#include <asm/dma.h>
#include <asm/amd_nb.h>
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index c36140d..ee8f118 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -16,7 +16,7 @@
#ifdef CONFIG_X86_64
# include <asm/mmconfig.h>
-# include <asm/cacheflush.h>
+# include <asm/set_memory.h>
#endif
#include "cpu.h"
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index a44ef52..0af86d9 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -17,7 +17,7 @@
#include <asm/paravirt.h>
#include <asm/alternative.h>
#include <asm/pgtable.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
void __init check_bugs(void)
{
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 8ee76dc..0651e97 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -24,7 +24,7 @@
#include <trace/syscall.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/kprobes.h>
#include <asm/ftrace.h>
#include <asm/nops.h>
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 19e1f2a..5b2bbfb 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -61,6 +61,7 @@
#include <asm/alternative.h>
#include <asm/insn.h>
#include <asm/debugreg.h>
+#include <asm/set_memory.h>
#include "common.h"
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index 9aadff3..901c640 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -37,6 +37,7 @@
#include <asm/alternative.h>
#include <asm/insn.h>
#include <asm/debugreg.h>
+#include <asm/set_memory.h>
#include "common.h"
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 5f43cec..8c53c5d 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -23,7 +23,7 @@
#include <asm/io_apic.h>
#include <asm/cpufeature.h>
#include <asm/desc.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/debugreg.h>
static void set_idt(void *newidt, __u16 limit)
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 085c3b3..ce64042 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -27,6 +27,7 @@
#include <asm/debugreg.h>
#include <asm/kexec-bzimage64.h>
#include <asm/setup.h>
+#include <asm/set_memory.h>
#ifdef CONFIG_KEXEC_FILE
static struct kexec_file_ops *kexec_file_loaders[] = {
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index 477ae80..f67bd32 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -85,7 +85,7 @@ void *module_alloc(unsigned long size)
p = __vmalloc_node_range(size, MODULE_ALIGN,
MODULES_VADDR + get_module_load_offset(),
- MODULES_END, GFP_KERNEL | __GFP_HIGHMEM,
+ MODULES_END, GFP_KERNEL,
PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
__builtin_return_address(0));
if (p && (kasan_module_alloc(p, size) < 0)) {
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index d4c8011..4b17240 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -514,6 +514,9 @@ int tboot_force_iommu(void)
if (!tboot_enabled())
return 0;
+ if (!intel_iommu_tboot_noforce)
+ return 1;
+
if (no_iommu || swiotlb || dmar_disabled)
pr_warning("Forcing Intel-IOMMU to enabled\n");
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 9fa5b81..c329d28 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -177,8 +177,8 @@ static void recalculate_apic_map(struct kvm *kvm)
if (kvm_apic_present(vcpu))
max_id = max(max_id, kvm_x2apic_id(vcpu->arch.apic));
- new = kvm_kvzalloc(sizeof(struct kvm_apic_map) +
- sizeof(struct kvm_lapic *) * ((u64)max_id + 1));
+ new = kvzalloc(sizeof(struct kvm_apic_map) +
+ sizeof(struct kvm_lapic *) * ((u64)max_id + 1), GFP_KERNEL);
if (!new)
goto out;
diff --git a/arch/x86/kvm/page_track.c b/arch/x86/kvm/page_track.c
index 60168cd..ea67dc8 100644
--- a/arch/x86/kvm/page_track.c
+++ b/arch/x86/kvm/page_track.c
@@ -40,8 +40,8 @@ int kvm_page_track_create_memslot(struct kvm_memory_slot *slot,
int i;
for (i = 0; i < KVM_PAGE_TRACK_MAX; i++) {
- slot->arch.gfn_track[i] = kvm_kvzalloc(npages *
- sizeof(*slot->arch.gfn_track[i]));
+ slot->arch.gfn_track[i] = kvzalloc(npages *
+ sizeof(*slot->arch.gfn_track[i]), GFP_KERNEL);
if (!slot->arch.gfn_track[i])
goto track_free;
}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index b38a302..464da93 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8190,13 +8190,13 @@ int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
slot->base_gfn, level) + 1;
slot->arch.rmap[i] =
- kvm_kvzalloc(lpages * sizeof(*slot->arch.rmap[i]));
+ kvzalloc(lpages * sizeof(*slot->arch.rmap[i]), GFP_KERNEL);
if (!slot->arch.rmap[i])
goto out_free;
if (i == 0)
continue;
- linfo = kvm_kvzalloc(lpages * sizeof(*linfo));
+ linfo = kvzalloc(lpages * sizeof(*linfo), GFP_KERNEL);
if (!linfo)
goto out_free;
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 138bad2..cbc87ea 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -5,7 +5,7 @@
#include <linux/memblock.h>
#include <linux/bootmem.h> /* for max_low_pfn */
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/e820/api.h>
#include <asm/init.h>
#include <asm/page.h>
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index f34d275..99fb838 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -48,7 +48,7 @@
#include <asm/sections.h>
#include <asm/paravirt.h>
#include <asm/setup.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/page_types.h>
#include <asm/init.h>
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 745e5e1..41270b9 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -50,7 +50,7 @@
#include <asm/sections.h>
#include <asm/kdebug.h>
#include <asm/numa.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/init.h>
#include <asm/uv/uv.h>
#include <asm/setup.h>
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index e4f7b25..bbc558b 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -14,7 +14,7 @@
#include <linux/vmalloc.h>
#include <linux/mmiotrace.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/e820/api.h>
#include <asm/fixmap.h>
#include <asm/pgtable.h>
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 56b22fa..1dcd2be 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -24,6 +24,7 @@
#include <asm/pgalloc.h>
#include <asm/proto.h>
#include <asm/pat.h>
+#include <asm/set_memory.h>
/*
* The current flushing context - we pass it instead of 5 arguments:
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 14f840d..f589393 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -12,6 +12,7 @@
#include <linux/filter.h>
#include <linux/if_vlan.h>
#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <linux/bpf.h>
int bpf_jit_enable __read_mostly;
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 6fa84d5..7b43071 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -406,50 +406,3 @@ void __init pcibios_resource_survey(void)
*/
ioapic_insert_resources();
}
-
-static const struct vm_operations_struct pci_mmap_ops = {
- .access = generic_access_phys,
-};
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long prot;
-
- /* I/O space cannot be accessed via normal processor loads and
- * stores on this platform.
- */
- if (mmap_state == pci_mmap_io)
- return -EINVAL;
-
- prot = pgprot_val(vma->vm_page_prot);
-
- /*
- * Return error if pat is not enabled and write_combine is requested.
- * Caller can followup with UC MINUS request and add a WC mtrr if there
- * is a free mtrr slot.
- */
- if (!pat_enabled() && write_combine)
- return -EINVAL;
-
- if (pat_enabled() && write_combine)
- prot |= cachemode2protval(_PAGE_CACHE_MODE_WC);
- else if (pat_enabled() || boot_cpu_data.x86 > 3)
- /*
- * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
- * To avoid attribute conflicts, request UC MINUS here
- * as well.
- */
- prot |= cachemode2protval(_PAGE_CACHE_MODE_UC_MINUS);
-
- vma->vm_page_prot = __pgprot(prot);
-
- if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot))
- return -EAGAIN;
-
- vma->vm_ops = &pci_mmap_ops;
-
- return 0;
-}
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 29e9ba6..c1bdb9e 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -11,7 +11,7 @@
#include <asm/pci_x86.h>
#include <asm/e820/types.h>
#include <asm/pci-functions.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
/* BIOS32 signature: "_32_" */
#define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index a15cf81..7e76a4d 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -49,7 +49,7 @@
#include <asm/efi.h>
#include <asm/e820/api.h>
#include <asm/time.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/tlbflush.h>
#include <asm/x86_init.h>
#include <asm/uv/uv.h>
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index 5db706f1..a163a90 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -2,7 +2,7 @@
#include <linux/slab.h>
#include <linux/memblock.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/pgtable.h>
#include <asm/realmode.h>
#include <asm/tlbflush.h>
diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h
index 5d6bd93..e4f366a 100644
--- a/arch/xtensa/include/asm/pci.h
+++ b/arch/xtensa/include/asm/pci.h
@@ -46,12 +46,9 @@ struct pci_dev;
#define PCI_DMA_BUS_IS_PHYS (1)
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
-
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP 1
+#define HAVE_PCI_MMAP 1
+#define arch_can_pci_mmap_io() 1
#endif /* __KERNEL__ */
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index b848cc3..903963e 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -334,25 +334,6 @@ __pci_mmap_make_offset(struct pci_dev *dev, struct vm_area_struct *vma,
}
/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static __inline__ void
-__pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- int prot = pgprot_val(vma->vm_page_prot);
-
- /* Set to write-through */
- prot = (prot & _PAGE_CA_MASK) | _PAGE_CA_WT;
-#if 0
- if (!write_combine)
- prot |= _PAGE_WRITETHRU;
-#endif
- vma->vm_page_prot = __pgprot(prot);
-}
-
-/*
* Perform the actual remap of the pages for a PCI device mapping, as
* appropriate for this architecture. The region in the process to map
* is described by vm_start and vm_end members of VMA, the base physical
@@ -362,7 +343,8 @@ __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma,
*
* Returns a negative error code on failure, zero on success.
*/
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+int pci_mmap_page_range(struct pci_dev *dev, int bar,
+ struct vm_area_struct *vma,
enum pci_mmap_state mmap_state,
int write_combine)
{
@@ -372,7 +354,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
if (ret < 0)
return ret;
- __pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine);
+ vma->vm_page_prot = pgprot_device(vma->vm_page_prot);
ret = io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start,vma->vm_page_prot);
diff --git a/certs/blacklist.c b/certs/blacklist.c
index 3eddce0..3a507b9 100644
--- a/certs/blacklist.c
+++ b/certs/blacklist.c
@@ -140,7 +140,7 @@ int is_hash_blacklisted(const u8 *hash, size_t hash_len, const char *type)
EXPORT_SYMBOL_GPL(is_hash_blacklisted);
/*
- * Intialise the blacklist
+ * Initialise the blacklist
*/
static int __init blacklist_init(void)
{
diff --git a/crypto/lzo.c b/crypto/lzo.c
index 168df78..218567d 100644
--- a/crypto/lzo.c
+++ b/crypto/lzo.c
@@ -32,9 +32,7 @@ static void *lzo_alloc_ctx(struct crypto_scomp *tfm)
{
void *ctx;
- ctx = kmalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL | __GFP_NOWARN);
- if (!ctx)
- ctx = vmalloc(LZO1X_MEM_COMPRESS);
+ ctx = kvmalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
if (!ctx)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/Makefile b/drivers/Makefile
index 903b191..edba1ed 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -14,7 +14,9 @@
obj-$(CONFIG_PINCTRL) += pinctrl/
obj-$(CONFIG_GPIOLIB) += gpio/
obj-y += pwm/
+
obj-$(CONFIG_PCI) += pci/
+obj-$(CONFIG_PCI_ENDPOINT) += pci/endpoint/
# PCI dwc controller drivers
obj-y += pci/dwc/
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 7207e5f..2c462be 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -513,7 +513,7 @@ static int __erst_record_id_cache_add_one(void)
if (i < erst_record_id_cache.len)
goto retry;
if (erst_record_id_cache.len >= erst_record_id_cache.size) {
- int new_size, alloc_size;
+ int new_size;
u64 *new_entries;
new_size = erst_record_id_cache.size * 2;
@@ -524,11 +524,7 @@ static int __erst_record_id_cache_add_one(void)
pr_warn(FW_WARN "too many record IDs!\n");
return 0;
}
- alloc_size = new_size * sizeof(entries[0]);
- if (alloc_size < PAGE_SIZE)
- new_entries = kmalloc(alloc_size, GFP_KERNEL);
- else
- new_entries = vmalloc(alloc_size);
+ new_entries = kvmalloc(new_size * sizeof(entries[0]), GFP_KERNEL);
if (!new_entries)
return -ENOMEM;
memcpy(new_entries, entries,
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 22e08d2..c5fecf9 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -618,6 +618,46 @@ static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
return ret;
}
+static inline bool iort_iommu_driver_enabled(u8 type)
+{
+ switch (type) {
+ case ACPI_IORT_NODE_SMMU_V3:
+ return IS_BUILTIN(CONFIG_ARM_SMMU_V3);
+ case ACPI_IORT_NODE_SMMU:
+ return IS_BUILTIN(CONFIG_ARM_SMMU);
+ default:
+ pr_warn("IORT node type %u does not describe an SMMU\n", type);
+ return false;
+ }
+}
+
+#ifdef CONFIG_IOMMU_API
+static inline
+const struct iommu_ops *iort_fwspec_iommu_ops(struct iommu_fwspec *fwspec)
+{
+ return (fwspec && fwspec->ops) ? fwspec->ops : NULL;
+}
+
+static inline
+int iort_add_device_replay(const struct iommu_ops *ops, struct device *dev)
+{
+ int err = 0;
+
+ if (!IS_ERR_OR_NULL(ops) && ops->add_device && dev->bus &&
+ !dev->iommu_group)
+ err = ops->add_device(dev);
+
+ return err;
+}
+#else
+static inline
+const struct iommu_ops *iort_fwspec_iommu_ops(struct iommu_fwspec *fwspec)
+{ return NULL; }
+static inline
+int iort_add_device_replay(const struct iommu_ops *ops, struct device *dev)
+{ return 0; }
+#endif
+
static const struct iommu_ops *iort_iommu_xlate(struct device *dev,
struct acpi_iort_node *node,
u32 streamid)
@@ -626,14 +666,31 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev,
int ret = -ENODEV;
struct fwnode_handle *iort_fwnode;
+ /*
+ * If we already translated the fwspec there
+ * is nothing left to do, return the iommu_ops.
+ */
+ ops = iort_fwspec_iommu_ops(dev->iommu_fwspec);
+ if (ops)
+ return ops;
+
if (node) {
iort_fwnode = iort_get_fwnode(node);
if (!iort_fwnode)
return NULL;
ops = iommu_ops_from_fwnode(iort_fwnode);
+ /*
+ * If the ops look-up fails, this means that either
+ * the SMMU drivers have not been probed yet or that
+ * the SMMU drivers are not built in the kernel;
+ * Depending on whether the SMMU drivers are built-in
+ * in the kernel or not, defer the IOMMU configuration
+ * or just abort it.
+ */
if (!ops)
- return NULL;
+ return iort_iommu_driver_enabled(node->type) ?
+ ERR_PTR(-EPROBE_DEFER) : NULL;
ret = arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
}
@@ -676,6 +733,7 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
struct acpi_iort_node *node, *parent;
const struct iommu_ops *ops = NULL;
u32 streamid = 0;
+ int err;
if (dev_is_pci(dev)) {
struct pci_bus *bus = to_pci_dev(dev)->bus;
@@ -707,6 +765,8 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
while (parent) {
ops = iort_iommu_xlate(dev, parent, streamid);
+ if (IS_ERR_OR_NULL(ops))
+ return ops;
parent = iort_node_map_platform_id(node, &streamid,
IORT_IOMMU_TYPE,
@@ -714,6 +774,14 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
}
}
+ /*
+ * If we have reason to believe the IOMMU driver missed the initial
+ * add_device callback for dev, replay it to get things in order.
+ */
+ err = iort_add_device_replay(ops, dev);
+ if (err)
+ ops = ERR_PTR(err);
+
return ops;
}
@@ -1052,6 +1120,4 @@ void __init acpi_iort_init(void)
}
iort_init_platform_devices();
-
- acpi_probe_device_table(iort);
}
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 6cbe603..e5b47f0 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -95,7 +95,7 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
/* pcc mapped address + header size + offset within PCC subspace */
#define GET_PCC_VADDR(offs) (pcc_data.pcc_comm_addr + 0x8 + (offs))
-/* Check if a CPC regsiter is in PCC */
+/* Check if a CPC register is in PCC */
#define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
(cpc)->cpc_entry.reg.space_id == \
ACPI_ADR_SPACE_PLATFORM_COMM)
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 3e70207..3be1433 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -179,7 +179,6 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
struct list_head *physnode_list;
unsigned int node_id;
int retval = -EINVAL;
- enum dev_dma_attr attr;
if (has_acpi_companion(dev)) {
if (acpi_dev) {
@@ -236,10 +235,6 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
if (!has_acpi_companion(dev))
ACPI_COMPANION_SET(dev, acpi_dev);
- attr = acpi_get_dma_attr(acpi_dev);
- if (attr != DEV_DMA_NOT_SUPPORTED)
- acpi_dma_configure(dev, attr);
-
acpi_physnode_link_name(physical_node_name, node_id);
retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
physical_node_name);
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 2944353..a4e8432 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -54,6 +54,7 @@ static struct mcfg_fixup mcfg_quirks[] = {
#define QCOM_ECAM32(seg) \
{ "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops }
+
QCOM_ECAM32(0),
QCOM_ECAM32(1),
QCOM_ECAM32(2),
@@ -68,6 +69,7 @@ static struct mcfg_fixup mcfg_quirks[] = {
{ "HISI ", table_id, 0, (seg) + 1, MCFG_BUS_ANY, ops }, \
{ "HISI ", table_id, 0, (seg) + 2, MCFG_BUS_ANY, ops }, \
{ "HISI ", table_id, 0, (seg) + 3, MCFG_BUS_ANY, ops }
+
HISI_QUAD_DOM("HIP05 ", 0, &hisi_pcie_ops),
HISI_QUAD_DOM("HIP06 ", 0, &hisi_pcie_ops),
HISI_QUAD_DOM("HIP07 ", 0, &hisi_pcie_ops),
@@ -77,6 +79,7 @@ static struct mcfg_fixup mcfg_quirks[] = {
#define THUNDER_PEM_RES(addr, node) \
DEFINE_RES_MEM((addr) + ((u64) (node) << 44), 0x39 * SZ_16M)
+
#define THUNDER_PEM_QUIRK(rev, node) \
{ "CAVIUM", "THUNDERX", rev, 4 + (10 * (node)), MCFG_BUS_ANY, \
&thunder_pem_ecam_ops, THUNDER_PEM_RES(0x88001f000000UL, node) }, \
@@ -90,13 +93,16 @@ static struct mcfg_fixup mcfg_quirks[] = {
&thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) }, \
{ "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY, \
&thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) }
- /* SoC pass2.x */
- THUNDER_PEM_QUIRK(1, 0),
- THUNDER_PEM_QUIRK(1, 1),
#define THUNDER_ECAM_QUIRK(rev, seg) \
{ "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \
&pci_thunder_ecam_ops }
+
+ /* SoC pass2.x */
+ THUNDER_PEM_QUIRK(1, 0),
+ THUNDER_PEM_QUIRK(1, 1),
+ THUNDER_ECAM_QUIRK(1, 10),
+
/* SoC pass1.x */
THUNDER_PEM_QUIRK(2, 0), /* off-chip devices */
THUNDER_PEM_QUIRK(2, 1), /* off-chip devices */
@@ -112,9 +118,11 @@ static struct mcfg_fixup mcfg_quirks[] = {
#define XGENE_V1_ECAM_MCFG(rev, seg) \
{"APM ", "XGENE ", rev, seg, MCFG_BUS_ANY, \
&xgene_v1_pcie_ecam_ops }
+
#define XGENE_V2_ECAM_MCFG(rev, seg) \
{"APM ", "XGENE ", rev, seg, MCFG_BUS_ANY, \
&xgene_v2_pcie_ecam_ops }
+
/* X-Gene SoC with v1 PCIe controller */
XGENE_V1_ECAM_MCFG(1, 0),
XGENE_V1_ECAM_MCFG(1, 1),
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index c269310..e39ec7b 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1363,20 +1363,25 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
* @dev: The pointer to the device
* @attr: device dma attributes
*/
-void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
+int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
{
const struct iommu_ops *iommu;
+ u64 size;
iort_set_dma_mask(dev);
iommu = iort_iommu_configure(dev);
+ if (IS_ERR(iommu))
+ return PTR_ERR(iommu);
+ size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
/*
* Assume dma valid range starts at 0 and covers the whole
* coherent_dma_mask.
*/
- arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, iommu,
- attr == DEV_DMA_COHERENT);
+ arch_setup_dma_ops(dev, 0, size, iommu, attr == DEV_DMA_COHERENT);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(acpi_dma_configure);
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ff6cb9e..de3eaf0 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -518,6 +518,15 @@
If unsure, say N.
+config PATA_BK3710
+ tristate "Palmchip BK3710 PATA support"
+ depends on ARCH_DAVINCI
+ help
+ This option enables support for the integrated IDE controller on
+ the TI DaVinci SoC.
+
+ If unsure, say N.
+
config PATA_CMD64X
tristate "CMD64x PATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 3048cc1..cd931a5 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -51,6 +51,7 @@
obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o
obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
+obj-$(CONFIG_PATA_BK3710) += pata_bk3710.o
obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o
obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o
diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
new file mode 100644
index 0000000..6c3bd5f
--- /dev/null
+++ b/drivers/ata/pata_bk3710.c
@@ -0,0 +1,382 @@
+/*
+ * Palmchip BK3710 PATA controller driver
+ *
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on palm_bk3710.c:
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/ata.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#define DRV_NAME "pata_bk3710"
+
+#define BK3710_TF_OFFSET 0x1F0
+#define BK3710_CTL_OFFSET 0x3F6
+
+#define BK3710_BMISP 0x02
+#define BK3710_IDETIMP 0x40
+#define BK3710_UDMACTL 0x48
+#define BK3710_MISCCTL 0x50
+#define BK3710_REGSTB 0x54
+#define BK3710_REGRCVR 0x58
+#define BK3710_DATSTB 0x5C
+#define BK3710_DATRCVR 0x60
+#define BK3710_DMASTB 0x64
+#define BK3710_DMARCVR 0x68
+#define BK3710_UDMASTB 0x6C
+#define BK3710_UDMATRP 0x70
+#define BK3710_UDMAENV 0x74
+#define BK3710_IORDYTMP 0x78
+
+static struct scsi_host_template pata_bk3710_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static unsigned int ideclk_period; /* in nanoseconds */
+
+struct pata_bk3710_udmatiming {
+ unsigned int rptime; /* tRP -- Ready to pause time (nsec) */
+ unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */
+ /* tENV is always a minimum of 20 nsec */
+};
+
+static const struct pata_bk3710_udmatiming pata_bk3710_udmatimings[6] = {
+ { 160, 240 / 2 }, /* UDMA Mode 0 */
+ { 125, 160 / 2 }, /* UDMA Mode 1 */
+ { 100, 120 / 2 }, /* UDMA Mode 2 */
+ { 100, 90 / 2 }, /* UDMA Mode 3 */
+ { 100, 60 / 2 }, /* UDMA Mode 4 */
+ { 85, 40 / 2 }, /* UDMA Mode 5 */
+};
+
+static void pata_bk3710_setudmamode(void __iomem *base, unsigned int dev,
+ unsigned int mode)
+{
+ u32 val32;
+ u16 val16;
+ u8 tenv, trp, t0;
+
+ /* DMA Data Setup */
+ t0 = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].cycletime,
+ ideclk_period) - 1;
+ tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
+ trp = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].rptime,
+ ideclk_period) - 1;
+
+ /* udmastb Ultra DMA Access Strobe Width */
+ val32 = ioread32(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= t0 << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_UDMASTB);
+
+ /* udmatrp Ultra DMA Ready to Pause Time */
+ val32 = ioread32(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
+ val32 |= trp << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_UDMATRP);
+
+ /* udmaenv Ultra DMA envelop Time */
+ val32 = ioread32(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
+ val32 |= tenv << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_UDMAENV);
+
+ /* Enable UDMA for Device */
+ val16 = ioread16(base + BK3710_UDMACTL) | (1 << dev);
+ iowrite16(val16, base + BK3710_UDMACTL);
+}
+
+static void pata_bk3710_setmwdmamode(void __iomem *base, unsigned int dev,
+ unsigned short min_cycle,
+ unsigned int mode)
+{
+ const struct ata_timing *t;
+ int cycletime;
+ u32 val32;
+ u16 val16;
+ u8 td, tkw, t0;
+
+ t = ata_timing_find_mode(mode);
+ cycletime = max_t(int, t->cycle, min_cycle);
+
+ /* DMA Data Setup */
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+ td = DIV_ROUND_UP(t->active, ideclk_period);
+ tkw = t0 - td - 1;
+ td--;
+
+ val32 = ioread32(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= td << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_DMASTB);
+
+ val32 = ioread32(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= tkw << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_DMARCVR);
+
+ /* Disable UDMA for Device */
+ val16 = ioread16(base + BK3710_UDMACTL) & ~(1 << dev);
+ iowrite16(val16, base + BK3710_UDMACTL);
+}
+
+static void pata_bk3710_set_dmamode(struct ata_port *ap,
+ struct ata_device *adev)
+{
+ void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
+ int is_slave = adev->devno;
+ const u8 xferspeed = adev->dma_mode;
+
+ if (xferspeed >= XFER_UDMA_0)
+ pata_bk3710_setudmamode(base, is_slave,
+ xferspeed - XFER_UDMA_0);
+ else
+ pata_bk3710_setmwdmamode(base, is_slave,
+ adev->id[ATA_ID_EIDE_DMA_MIN],
+ xferspeed);
+}
+
+static void pata_bk3710_setpiomode(void __iomem *base, struct ata_device *pair,
+ unsigned int dev, unsigned int cycletime,
+ unsigned int mode)
+{
+ const struct ata_timing *t;
+ u32 val32;
+ u8 t2, t2i, t0;
+
+ t = ata_timing_find_mode(XFER_PIO_0 + mode);
+
+ /* PIO Data Setup */
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+ t2 = DIV_ROUND_UP(t->active, ideclk_period);
+
+ t2i = t0 - t2 - 1;
+ t2--;
+
+ val32 = ioread32(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= t2 << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_DATSTB);
+
+ val32 = ioread32(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= t2i << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_DATRCVR);
+
+ /* FIXME: this is broken also in the old driver */
+ if (pair) {
+ u8 mode2 = pair->pio_mode - XFER_PIO_0;
+
+ if (mode2 < mode)
+ mode = mode2;
+ }
+
+ /* TASKFILE Setup */
+ t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
+ t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
+
+ t2i = t0 - t2 - 1;
+ t2--;
+
+ val32 = ioread32(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= t2 << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_REGSTB);
+
+ val32 = ioread32(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= t2i << (dev ? 8 : 0);
+ iowrite32(val32, base + BK3710_REGRCVR);
+}
+
+static void pata_bk3710_set_piomode(struct ata_port *ap,
+ struct ata_device *adev)
+{
+ void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
+ struct ata_device *pair = ata_dev_pair(adev);
+ const struct ata_timing *t = ata_timing_find_mode(adev->pio_mode);
+ const u16 *id = adev->id;
+ unsigned int cycle_time = 0;
+ int is_slave = adev->devno;
+ const u8 pio = adev->pio_mode - XFER_PIO_0;
+
+ if (id[ATA_ID_FIELD_VALID] & 2) {
+ if (ata_id_has_iordy(id))
+ cycle_time = id[ATA_ID_EIDE_PIO_IORDY];
+ else
+ cycle_time = id[ATA_ID_EIDE_PIO];
+
+ /* conservative "downgrade" for all pre-ATA2 drives */
+ if (pio < 3 && cycle_time < t->cycle)
+ cycle_time = 0; /* use standard timing */
+ }
+
+ if (!cycle_time)
+ cycle_time = t->cycle;
+
+ pata_bk3710_setpiomode(base, pair, is_slave, cycle_time, pio);
+}
+
+static void pata_bk3710_chipinit(void __iomem *base)
+{
+ /*
+ * REVISIT: the ATA reset signal needs to be managed through a
+ * GPIO, which means it should come from platform_data. Until
+ * we get and use such information, we have to trust that things
+ * have been reset before we get here.
+ */
+
+ /*
+ * Program the IDETIMP Register Value based on the following assumptions
+ *
+ * (ATA_IDETIMP_IDEEN , ENABLE ) |
+ * (ATA_IDETIMP_PREPOST1 , DISABLE) |
+ * (ATA_IDETIMP_PREPOST0 , DISABLE) |
+ *
+ * DM6446 silicon rev 2.1 and earlier have no observed net benefit
+ * from enabling prefetch/postwrite.
+ */
+ iowrite16(BIT(15), base + BK3710_IDETIMP);
+
+ /*
+ * UDMACTL Ultra-ATA DMA Control
+ * (ATA_UDMACTL_UDMAP1 , 0 ) |
+ * (ATA_UDMACTL_UDMAP0 , 0 )
+ *
+ */
+ iowrite16(0, base + BK3710_UDMACTL);
+
+ /*
+ * MISCCTL Miscellaneous Conrol Register
+ * (ATA_MISCCTL_HWNHLD1P , 1 cycle)
+ * (ATA_MISCCTL_HWNHLD0P , 1 cycle)
+ * (ATA_MISCCTL_TIMORIDE , 1)
+ */
+ iowrite32(0x001, base + BK3710_MISCCTL);
+
+ /*
+ * IORDYTMP IORDY Timer for Primary Register
+ * (ATA_IORDYTMP_IORDYTMP , DISABLE)
+ */
+ iowrite32(0, base + BK3710_IORDYTMP);
+
+ /*
+ * Configure BMISP Register
+ * (ATA_BMISP_DMAEN1 , DISABLE ) |
+ * (ATA_BMISP_DMAEN0 , DISABLE ) |
+ * (ATA_BMISP_IORDYINT , CLEAR) |
+ * (ATA_BMISP_INTRSTAT , CLEAR) |
+ * (ATA_BMISP_DMAERROR , CLEAR)
+ */
+ iowrite16(0xE, base + BK3710_BMISP);
+
+ pata_bk3710_setpiomode(base, NULL, 0, 600, 0);
+ pata_bk3710_setpiomode(base, NULL, 1, 600, 0);
+}
+
+static struct ata_port_operations pata_bk3710_ports_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_80wire,
+
+ .set_piomode = pata_bk3710_set_piomode,
+ .set_dmamode = pata_bk3710_set_dmamode,
+};
+
+static int __init pata_bk3710_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct resource *mem;
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *base;
+ unsigned long rate;
+ int irq;
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return -ENODEV;
+
+ clk_enable(clk);
+ rate = clk_get_rate(clk);
+ if (!rate)
+ return -EINVAL;
+
+ /* NOTE: round *down* to meet minimum timings; we count in clocks */
+ ideclk_period = 1000000000UL / rate;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ pr_err(DRV_NAME ": failed to get IRQ resource\n");
+ return irq;
+ }
+
+ base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ /* configure the Palmchip controller */
+ pata_bk3710_chipinit(base);
+
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+ ap = host->ports[0];
+
+ ap->ops = &pata_bk3710_ports_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->mwdma_mask = ATA_MWDMA2;
+ ap->udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+ ap->ioaddr.data_addr = base + BK3710_TF_OFFSET;
+ ap->ioaddr.error_addr = base + BK3710_TF_OFFSET + 1;
+ ap->ioaddr.feature_addr = base + BK3710_TF_OFFSET + 1;
+ ap->ioaddr.nsect_addr = base + BK3710_TF_OFFSET + 2;
+ ap->ioaddr.lbal_addr = base + BK3710_TF_OFFSET + 3;
+ ap->ioaddr.lbam_addr = base + BK3710_TF_OFFSET + 4;
+ ap->ioaddr.lbah_addr = base + BK3710_TF_OFFSET + 5;
+ ap->ioaddr.device_addr = base + BK3710_TF_OFFSET + 6;
+ ap->ioaddr.status_addr = base + BK3710_TF_OFFSET + 7;
+ ap->ioaddr.command_addr = base + BK3710_TF_OFFSET + 7;
+
+ ap->ioaddr.altstatus_addr = base + BK3710_CTL_OFFSET;
+ ap->ioaddr.ctl_addr = base + BK3710_CTL_OFFSET;
+
+ ap->ioaddr.bmdma_addr = base;
+
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
+ (unsigned long)base + BK3710_TF_OFFSET,
+ (unsigned long)base + BK3710_CTL_OFFSET);
+
+ /* activate */
+ return ata_host_activate(host, irq, ata_sff_interrupt, 0,
+ &pata_bk3710_sht);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:palm_bk3710");
+
+static struct platform_driver pata_bk3710_driver = {
+ .driver = {
+ .name = "palm_bk3710",
+ },
+};
+
+static int __init pata_bk3710_init(void)
+{
+ return platform_driver_probe(&pata_bk3710_driver, pata_bk3710_probe);
+}
+
+module_init(pata_bk3710_init);
+MODULE_LICENSE("GPL");
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index a1fbf55..4882f06 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -19,6 +19,7 @@
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/wait.h>
@@ -356,6 +357,10 @@ static int really_probe(struct device *dev, struct device_driver *drv)
if (ret)
goto pinctrl_bind_failed;
+ ret = dma_configure(dev);
+ if (ret)
+ goto dma_failed;
+
if (driver_sysfs_add(dev)) {
printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
__func__, dev_name(dev));
@@ -417,6 +422,8 @@ static int really_probe(struct device *dev, struct device_driver *drv)
goto done;
probe_failed:
+ dma_deconfigure(dev);
+dma_failed:
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
@@ -826,6 +833,8 @@ static void __device_release_driver(struct device *dev, struct device *parent)
drv->remove(dev);
device_links_driver_cleanup(dev);
+ dma_deconfigure(dev);
+
devres_release_all(dev);
dev->driver = NULL;
dev_set_drvdata(dev, NULL);
diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
index 51b7061..f3deb6a 100644
--- a/drivers/base/dma-mapping.c
+++ b/drivers/base/dma-mapping.c
@@ -7,9 +7,11 @@
* This file is released under the GPLv2.
*/
+#include <linux/acpi.h>
#include <linux/dma-mapping.h>
#include <linux/export.h>
#include <linux/gfp.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
@@ -340,3 +342,42 @@ void dma_common_free_remap(void *cpu_addr, size_t size, unsigned long vm_flags)
vunmap(cpu_addr);
}
#endif
+
+/*
+ * Common configuration to enable DMA API use for a device
+ */
+#include <linux/pci.h>
+
+int dma_configure(struct device *dev)
+{
+ struct device *bridge = NULL, *dma_dev = dev;
+ enum dev_dma_attr attr;
+ int ret = 0;
+
+ if (dev_is_pci(dev)) {
+ bridge = pci_get_host_bridge_device(to_pci_dev(dev));
+ dma_dev = bridge;
+ if (IS_ENABLED(CONFIG_OF) && dma_dev->parent &&
+ dma_dev->parent->of_node)
+ dma_dev = dma_dev->parent;
+ }
+
+ if (dma_dev->of_node) {
+ ret = of_dma_configure(dev, dma_dev->of_node);
+ } else if (has_acpi_companion(dma_dev)) {
+ attr = acpi_get_dma_attr(to_acpi_device_node(dma_dev->fwnode));
+ if (attr != DEV_DMA_NOT_SUPPORTED)
+ ret = acpi_dma_configure(dev, attr);
+ }
+
+ if (bridge)
+ pci_put_host_bridge_device(bridge);
+
+ return ret;
+}
+
+void dma_deconfigure(struct device *dev)
+{
+ of_dma_deconfigure(dev);
+ acpi_dma_deconfigure(dev);
+}
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index ad19642..da49a83 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1636,8 +1636,6 @@ static struct generic_pm_domain *genpd_xlate_simple(
struct of_phandle_args *genpdspec,
void *data)
{
- if (genpdspec->args_count != 0)
- return ERR_PTR(-EINVAL);
return data;
}
diff --git a/drivers/base/soc.c b/drivers/base/soc.c
index dc26e59..909deda 100644
--- a/drivers/base/soc.c
+++ b/drivers/base/soc.c
@@ -109,15 +109,18 @@ static void soc_release(struct device *dev)
kfree(soc_dev);
}
+static struct soc_device_attribute *early_soc_dev_attr;
+
struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr)
{
struct soc_device *soc_dev;
int ret;
if (!soc_bus_type.p) {
- ret = bus_register(&soc_bus_type);
- if (ret)
- goto out1;
+ if (early_soc_dev_attr)
+ return ERR_PTR(-EBUSY);
+ early_soc_dev_attr = soc_dev_attr;
+ return NULL;
}
soc_dev = kzalloc(sizeof(*soc_dev), GFP_KERNEL);
@@ -159,43 +162,51 @@ void soc_device_unregister(struct soc_device *soc_dev)
ida_simple_remove(&soc_ida, soc_dev->soc_dev_num);
device_unregister(&soc_dev->dev);
+ early_soc_dev_attr = NULL;
}
static int __init soc_bus_register(void)
{
- if (soc_bus_type.p)
- return 0;
+ int ret;
- return bus_register(&soc_bus_type);
+ ret = bus_register(&soc_bus_type);
+ if (ret)
+ return ret;
+
+ if (early_soc_dev_attr)
+ return PTR_ERR(soc_device_register(early_soc_dev_attr));
+
+ return 0;
}
core_initcall(soc_bus_register);
+static int soc_device_match_attr(const struct soc_device_attribute *attr,
+ const struct soc_device_attribute *match)
+{
+ if (match->machine &&
+ (!attr->machine || !glob_match(match->machine, attr->machine)))
+ return 0;
+
+ if (match->family &&
+ (!attr->family || !glob_match(match->family, attr->family)))
+ return 0;
+
+ if (match->revision &&
+ (!attr->revision || !glob_match(match->revision, attr->revision)))
+ return 0;
+
+ if (match->soc_id &&
+ (!attr->soc_id || !glob_match(match->soc_id, attr->soc_id)))
+ return 0;
+
+ return 1;
+}
+
static int soc_device_match_one(struct device *dev, void *arg)
{
struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
- const struct soc_device_attribute *match = arg;
- if (match->machine &&
- (!soc_dev->attr->machine ||
- !glob_match(match->machine, soc_dev->attr->machine)))
- return 0;
-
- if (match->family &&
- (!soc_dev->attr->family ||
- !glob_match(match->family, soc_dev->attr->family)))
- return 0;
-
- if (match->revision &&
- (!soc_dev->attr->revision ||
- !glob_match(match->revision, soc_dev->attr->revision)))
- return 0;
-
- if (match->soc_id &&
- (!soc_dev->attr->soc_id ||
- !glob_match(match->soc_id, soc_dev->attr->soc_id)))
- return 0;
-
- return 1;
+ return soc_device_match_attr(soc_dev->attr, arg);
}
/*
@@ -230,6 +241,11 @@ const struct soc_device_attribute *soc_device_match(
break;
ret = bus_for_each_dev(&soc_bus_type, NULL, (void *)matches,
soc_device_match_one);
+ if (ret < 0 && early_soc_dev_attr)
+ ret = soc_device_match_attr(early_soc_dev_attr,
+ matches);
+ if (ret < 0)
+ return NULL;
if (!ret)
matches++;
else
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
index dece26f..a804a41 100644
--- a/drivers/block/drbd/drbd_bitmap.c
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -409,7 +409,7 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want)
new_pages = kzalloc(bytes, GFP_NOIO | __GFP_NOWARN);
if (!new_pages) {
new_pages = __vmalloc(bytes,
- GFP_NOIO | __GFP_HIGHMEM | __GFP_ZERO,
+ GFP_NOIO | __GFP_ZERO,
PAGE_KERNEL);
if (!new_pages)
return NULL;
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index e9e2a9e..9a7bb2c 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/sched/mm.h>
#include <linux/fs.h>
#include <linux/bio.h>
#include <linux/stat.h>
@@ -347,7 +348,7 @@ static int sock_xmit(struct nbd_device *nbd, int index, int send,
struct socket *sock = config->socks[index]->sock;
int result;
struct msghdr msg;
- unsigned long pflags = current->flags;
+ unsigned int noreclaim_flag;
if (unlikely(!sock)) {
dev_err_ratelimited(disk_to_dev(nbd->disk),
@@ -358,7 +359,7 @@ static int sock_xmit(struct nbd_device *nbd, int index, int send,
msg.msg_iter = *iter;
- current->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
do {
sock->sk->sk_allocation = GFP_NOIO | __GFP_MEMALLOC;
msg.msg_name = NULL;
@@ -381,7 +382,7 @@ static int sock_xmit(struct nbd_device *nbd, int index, int send,
*sent += result;
} while (msg_data_left(&msg));
- current_restore_flags(pflags, PF_MEMALLOC);
+ memalloc_noreclaim_restore(noreclaim_flag);
return result;
}
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 3670e8d..26812c1 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -1922,7 +1922,7 @@ static void rbd_osd_req_format_write(struct rbd_obj_request *obj_request)
{
struct ceph_osd_request *osd_req = obj_request->osd_req;
- osd_req->r_mtime = CURRENT_TIME;
+ ktime_get_real_ts(&osd_req->r_mtime);
osd_req->r_data_offset = obj_request->offset;
}
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 3661a51..5fbd333 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -9,6 +9,7 @@
#include <linux/page-flags.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <asm/set_memory.h>
#include "agp.h"
#define AMD_MMBASE_BAR 1
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 75a9786..0b5ec7a 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -10,6 +10,7 @@
#include <linux/slab.h>
#include <linux/agp_backend.h>
#include <asm/agp.h>
+#include <asm/set_memory.h>
#include "agp.h"
#define ATI_GART_MMBASE_BAR 1
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index f002fa5..658664a5 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -39,7 +39,9 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <asm/io.h>
-#include <asm/cacheflush.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
#include <asm/pgtable.h>
#include "agp.h"
@@ -88,13 +90,7 @@ static int agp_get_key(void)
void agp_alloc_page_array(size_t size, struct agp_memory *mem)
{
- mem->pages = NULL;
-
- if (size <= 2*PAGE_SIZE)
- mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NOWARN);
- if (mem->pages == NULL) {
- mem->pages = vmalloc(size);
- }
+ mem->pages = kvmalloc(size, GFP_KERNEL);
}
EXPORT_SYMBOL(agp_alloc_page_array);
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 7fcc2a9..9b6b602 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -25,6 +25,7 @@
#include "agp.h"
#include "intel-agp.h"
#include <drm/intel-gtt.h>
+#include <asm/set_memory.h>
/*
* If we have Intel graphics, we're not going to have anything other than
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 9b163b4..03be4ac 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -9,6 +9,7 @@
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/agp_backend.h>
+#include <asm/set_memory.h>
#include "agp.h"
#define SVWRKS_COMMAND 0x04
diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c
index 50aa9ba..0d7b577 100644
--- a/drivers/char/dsp56k.c
+++ b/drivers/char/dsp56k.c
@@ -489,7 +489,7 @@ static const struct file_operations dsp56k_fops = {
/****** Init and module functions ******/
-static char banner[] __initdata = KERN_INFO "DSP56k driver installed\n";
+static const char banner[] __initconst = KERN_INFO "DSP56k driver installed\n";
static int __init dsp56k_init_driver(void)
{
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index cbd62e4..945aefa 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -177,7 +177,7 @@
/* CLKID_FCLK_DIV4 */
#define CLKID_FCLK_DIV5 7
#define CLKID_FCLK_DIV7 8
-#define CLKID_GP0_PLL 9
+/* CLKID_GP0_PLL */
#define CLKID_MPEG_SEL 10
#define CLKID_MPEG_DIV 11
/* CLKID_CLK81 */
@@ -206,16 +206,16 @@
#define CLKID_I2S_SPDIF 35
/* CLKID_ETH */
#define CLKID_DEMUX 37
-#define CLKID_AIU_GLUE 38
+/* CLKID_AIU_GLUE */
#define CLKID_IEC958 39
-#define CLKID_I2S_OUT 40
+/* CLKID_I2S_OUT */
#define CLKID_AMCLK 41
#define CLKID_AIFIFO2 42
#define CLKID_MIXER 43
-#define CLKID_MIXER_IFACE 44
+/* CLKID_MIXER_IFACE */
#define CLKID_ADC 45
#define CLKID_BLKMV 46
-#define CLKID_AIU 47
+/* CLKID_AIU */
#define CLKID_UART1 48
#define CLKID_G2D 49
/* CLKID_USB0 */
@@ -248,7 +248,7 @@
/* CLKID_GCLK_VENCI_INT0 */
#define CLKID_GCLK_VENCI_INT 78
#define CLKID_DAC_CLK 79
-#define CLKID_AOCLK_GATE 80
+/* CLKID_AOCLK_GATE */
#define CLKID_IEC958_GATE 81
#define CLKID_ENC480P 82
#define CLKID_RNG1 83
@@ -268,8 +268,15 @@
/* CLKID_SAR_ADC_CLK */
/* CLKID_SAR_ADC_SEL */
#define CLKID_SAR_ADC_DIV 99
+/* CLKID_MALI_0_SEL */
+#define CLKID_MALI_0_DIV 101
+/* CLKID_MALI_0 */
+/* CLKID_MALI_1_SEL */
+#define CLKID_MALI_1_DIV 104
+/* CLKID_MALI_1 */
+/* CLKID_MALI */
-#define NR_CLKS 100
+#define NR_CLKS 107
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>
diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
index 03f9d31..d523991 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -128,7 +128,7 @@ static void qcom_cc_gdsc_unregister(void *data)
/*
* Backwards compatibility with old DTs. Register a pass-through factor 1/1
- * clock to translate 'path' clk into 'name' clk and regsiter the 'path'
+ * clock to translate 'path' clk into 'name' clk and register the 'path'
* clk as a fixed rate clock if it isn't present.
*/
static int _qcom_cc_register_board_clk(struct device *dev, const char *path,
diff --git a/drivers/clk/versatile/Kconfig b/drivers/clk/versatile/Kconfig
index a6da2aa..8aa875f 100644
--- a/drivers/clk/versatile/Kconfig
+++ b/drivers/clk/versatile/Kconfig
@@ -1,3 +1,6 @@
+config ICST
+ bool
+
config COMMON_CLK_VERSATILE
bool "Clock driver for ARM Reference designs"
depends on ARCH_INTEGRATOR || ARCH_REALVIEW || \
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index 8ff03744..79413040 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,5 +1,5 @@
# Makefile for Versatile-specific clocks
-obj-$(CONFIG_ICST) += clk-icst.o clk-versatile.o
+obj-$(CONFIG_ICST) += icst.o clk-icst.o clk-versatile.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
obj-$(CONFIG_CLK_SP810) += clk-sp810.o
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 4faa944..09fbe66 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -22,6 +22,7 @@
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
+#include "icst.h"
#include "clk-icst.h"
/* Magic unlocking token used on all Versatile boards */
diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
index 04e6f0a..5add02e 100644
--- a/drivers/clk/versatile/clk-icst.h
+++ b/drivers/clk/versatile/clk-icst.h
@@ -1,5 +1,3 @@
-#include <asm/hardware/icst.h>
-
/**
* struct clk_icst_desc - descriptor for the ICST VCO
* @params: ICST parameters
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index 74c3216..401558b 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/platform_data/clk-integrator.h>
+#include "icst.h"
#include "clk-icst.h"
#define IMPD1_OSC1 0x00
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
index c56efc7..6fdfee3 100644
--- a/drivers/clk/versatile/clk-realview.c
+++ b/drivers/clk/versatile/clk-realview.c
@@ -11,6 +11,7 @@
#include <linux/io.h>
#include <linux/clk-provider.h>
+#include "icst.h"
#include "clk-icst.h"
#define REALVIEW_SYS_OSC0_OFFSET 0x0C
diff --git a/drivers/clk/versatile/clk-versatile.c b/drivers/clk/versatile/clk-versatile.c
index a89a927..d6960de 100644
--- a/drivers/clk/versatile/clk-versatile.c
+++ b/drivers/clk/versatile/clk-versatile.c
@@ -12,6 +12,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
+#include "icst.h"
#include "clk-icst.h"
#define INTEGRATOR_HDR_LOCK_OFFSET 0x14
diff --git a/arch/arm/common/icst.c b/drivers/clk/versatile/icst.c
similarity index 98%
rename from arch/arm/common/icst.c
rename to drivers/clk/versatile/icst.c
index d7ed252..de2af63 100644
--- a/arch/arm/common/icst.c
+++ b/drivers/clk/versatile/icst.c
@@ -17,7 +17,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <asm/div64.h>
-#include <asm/hardware/icst.h>
+#include "icst.h"
/*
* Divisors for each OD setting.
diff --git a/arch/arm/include/asm/hardware/icst.h b/drivers/clk/versatile/icst.h
similarity index 93%
rename from arch/arm/include/asm/hardware/icst.h
rename to drivers/clk/versatile/icst.h
index 794220b..7519bba 100644
--- a/arch/arm/include/asm/hardware/icst.h
+++ b/drivers/clk/versatile/icst.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/include/asm/hardware/icst.h
- *
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
@@ -11,8 +9,8 @@
* clock generators. See http://www.idt.com/ for more information
* on these devices.
*/
-#ifndef ASMARM_HARDWARE_ICST_H
-#define ASMARM_HARDWARE_ICST_H
+#ifndef ICST_H
+#define ICST_H
struct icst_params {
unsigned long ref;
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index 0b5bf13..062d714 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -1171,7 +1171,8 @@ static struct cpufreq_driver cpufreq_amd64_driver = {
static void __request_acpi_cpufreq(void)
{
- const char *cur_drv, *drv = "acpi-cpufreq";
+ const char drv[] = "acpi-cpufreq";
+ const char *cur_drv;
cur_drv = cpufreq_get_current_driver();
if (!cur_drv)
diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
index a7db901..d2d0430 100644
--- a/drivers/cpufreq/sti-cpufreq.c
+++ b/drivers/cpufreq/sti-cpufreq.c
@@ -236,7 +236,7 @@ static int sti_cpufreq_set_opp_info(void)
return 0;
}
-static int sti_cpufreq_fetch_syscon_regsiters(void)
+static int sti_cpufreq_fetch_syscon_registers(void)
{
struct device *dev = ddata.cpu;
struct device_node *np = dev->of_node;
@@ -275,7 +275,7 @@ static int sti_cpufreq_init(void)
goto skip_voltage_scaling;
}
- ret = sti_cpufreq_fetch_syscon_regsiters();
+ ret = sti_cpufreq_fetch_syscon_registers();
if (ret)
goto skip_voltage_scaling;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index d01d598..24e8597 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -514,12 +514,12 @@
Enable support for the Timberdale FPGA DMA engine.
config TI_CPPI41
- tristate "AM33xx CPPI41 DMA support"
- depends on ARCH_OMAP
+ tristate "CPPI 4.1 DMA support"
+ depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX)
select DMA_ENGINE
help
The Communications Port Programming Interface (CPPI) 4.1 DMA engine
- is currently used by the USB driver on AM335x platforms.
+ is currently used by the USB driver on AM335x and DA8xx platforms.
config TI_DMA_CROSSBAR
bool
@@ -608,6 +608,7 @@
config DMATEST
tristate "DMA Test client"
depends on DMA_ENGINE
+ select DMA_ENGINE_RAID
help
Simple DMA test client. Say N unless you're debugging a
DMA Device driver.
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 0b7c6ce..6bb8813 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -106,6 +106,7 @@ struct pl08x_driver_data;
/**
* struct vendor_data - vendor-specific config parameters for PL08x derivatives
+ * @config_offset: offset to the configuration register
* @channels: the number of channels available in this variant
* @signals: the number of request signals available from the hardware
* @dualmaster: whether this version supports dual AHB masters or not.
@@ -145,6 +146,8 @@ struct pl08x_bus_data {
/**
* struct pl08x_phy_chan - holder for the physical channels
* @id: physical index to this channel
+ * @base: memory base address for this physical channel
+ * @reg_config: configuration address for this physical channel
* @lock: a lock to use when altering an instance of this struct
* @serving: the virtual channel currently being served by this physical
* channel
@@ -203,7 +206,7 @@ struct pl08x_txd {
};
/**
- * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
+ * enum pl08x_dma_chan_state - holds the PL08x specific virtual channel
* states
* @PL08X_CHAN_IDLE: the channel is idle
* @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
@@ -226,9 +229,8 @@ enum pl08x_dma_chan_state {
* @phychan: the physical channel utilized by this channel, if there is one
* @name: name of channel
* @cd: channel platform data
- * @runtime_addr: address for RX/TX according to the runtime config
+ * @cfg: slave configuration
* @at: active transaction on this channel
- * @lock: a lock for this channel data
* @host: a pointer to the host (internal use)
* @state: whether the channel is idle, paused, running etc
* @slave: whether this channel is a device (slave) or for memcpy
@@ -262,7 +264,7 @@ struct pl08x_dma_chan {
* @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
* fetches
* @mem_buses: set to indicate memory transfers on AHB2.
- * @lock: a spinlock for this struct
+ * @lli_words: how many words are used in each LLI item for this variant
*/
struct pl08x_driver_data {
struct dma_device slave;
@@ -417,7 +419,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
/* Enable the DMA channel */
/* Do not access config register until channel shows as disabled */
- while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
+ while (readl(pl08x->base + PL080_EN_CHAN) & BIT(phychan->id))
cpu_relax();
/* Do not access config register until channel shows as inactive */
@@ -484,8 +486,8 @@ static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
writel(val, ch->reg_config);
- writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
- writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
+ writel(BIT(ch->id), pl08x->base + PL080_ERR_CLEAR);
+ writel(BIT(ch->id), pl08x->base + PL080_TC_CLEAR);
}
static inline u32 get_bytes_in_cctl(u32 cctl)
@@ -1834,7 +1836,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
return IRQ_NONE;
for (i = 0; i < pl08x->vd->channels; i++) {
- if (((1 << i) & err) || ((1 << i) & tc)) {
+ if ((BIT(i) & err) || (BIT(i) & tc)) {
/* Locate physical channel */
struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
struct pl08x_dma_chan *plchan = phychan->serving;
@@ -1872,7 +1874,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
}
spin_unlock(&plchan->vc.lock);
- mask |= (1 << i);
+ mask |= BIT(i);
}
}
diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index d74cee0..f7e965f 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -68,7 +68,6 @@
#define QMGR_MEMCTRL_IDX_SH 16
#define QMGR_MEMCTRL_DESC_SH 8
-#define QMGR_NUM_PEND 5
#define QMGR_PEND(x) (0x90 + (x) * 4)
#define QMGR_PENDING_SLOT_Q(x) (x / 32)
@@ -131,7 +130,6 @@ struct cppi41_dd {
u32 first_td_desc;
struct cppi41_channel *chan_busy[ALLOC_DECS_NUM];
- void __iomem *usbss_mem;
void __iomem *ctrl_mem;
void __iomem *sched_mem;
void __iomem *qmgr_mem;
@@ -139,6 +137,10 @@ struct cppi41_dd {
const struct chan_queues *queues_rx;
const struct chan_queues *queues_tx;
struct chan_queues td_queue;
+ u16 first_completion_queue;
+ u16 qmgr_num_pend;
+ u32 n_chans;
+ u8 platform;
struct list_head pending; /* Pending queued transfers */
spinlock_t lock; /* Lock for pending list */
@@ -149,8 +151,7 @@ struct cppi41_dd {
bool is_suspended;
};
-#define FIST_COMPLETION_QUEUE 93
-static struct chan_queues usb_queues_tx[] = {
+static struct chan_queues am335x_usb_queues_tx[] = {
/* USB0 ENDP 1 */
[ 0] = { .submit = 32, .complete = 93},
[ 1] = { .submit = 34, .complete = 94},
@@ -186,7 +187,7 @@ static struct chan_queues usb_queues_tx[] = {
[29] = { .submit = 90, .complete = 139},
};
-static const struct chan_queues usb_queues_rx[] = {
+static const struct chan_queues am335x_usb_queues_rx[] = {
/* USB0 ENDP 1 */
[ 0] = { .submit = 1, .complete = 109},
[ 1] = { .submit = 2, .complete = 110},
@@ -222,11 +223,26 @@ static const struct chan_queues usb_queues_rx[] = {
[29] = { .submit = 30, .complete = 155},
};
+static const struct chan_queues da8xx_usb_queues_tx[] = {
+ [0] = { .submit = 16, .complete = 24},
+ [1] = { .submit = 18, .complete = 24},
+ [2] = { .submit = 20, .complete = 24},
+ [3] = { .submit = 22, .complete = 24},
+};
+
+static const struct chan_queues da8xx_usb_queues_rx[] = {
+ [0] = { .submit = 1, .complete = 26},
+ [1] = { .submit = 3, .complete = 26},
+ [2] = { .submit = 5, .complete = 26},
+ [3] = { .submit = 7, .complete = 26},
+};
+
struct cppi_glue_infos {
- irqreturn_t (*isr)(int irq, void *data);
const struct chan_queues *queues_rx;
const struct chan_queues *queues_tx;
struct chan_queues td_queue;
+ u16 first_completion_queue;
+ u16 qmgr_num_pend;
};
static struct cppi41_channel *to_cpp41_chan(struct dma_chan *c)
@@ -285,19 +301,21 @@ static u32 cppi41_pop_desc(struct cppi41_dd *cdd, unsigned queue_num)
static irqreturn_t cppi41_irq(int irq, void *data)
{
struct cppi41_dd *cdd = data;
+ u16 first_completion_queue = cdd->first_completion_queue;
+ u16 qmgr_num_pend = cdd->qmgr_num_pend;
struct cppi41_channel *c;
int i;
- for (i = QMGR_PENDING_SLOT_Q(FIST_COMPLETION_QUEUE); i < QMGR_NUM_PEND;
+ for (i = QMGR_PENDING_SLOT_Q(first_completion_queue); i < qmgr_num_pend;
i++) {
u32 val;
u32 q_num;
val = cppi_readl(cdd->qmgr_mem + QMGR_PEND(i));
- if (i == QMGR_PENDING_SLOT_Q(FIST_COMPLETION_QUEUE) && val) {
+ if (i == QMGR_PENDING_SLOT_Q(first_completion_queue) && val) {
u32 mask;
/* set corresponding bit for completetion Q 93 */
- mask = 1 << QMGR_PENDING_BIT_Q(FIST_COMPLETION_QUEUE);
+ mask = 1 << QMGR_PENDING_BIT_Q(first_completion_queue);
/* not set all bits for queues less than Q 93 */
mask--;
/* now invert and keep only Q 93+ set */
@@ -402,11 +420,9 @@ static enum dma_status cppi41_dma_tx_status(struct dma_chan *chan,
struct cppi41_channel *c = to_cpp41_chan(chan);
enum dma_status ret;
- /* lock */
ret = dma_cookie_status(chan, cookie, txstate);
- if (txstate && ret == DMA_COMPLETE)
- txstate->residue = c->residue;
- /* unlock */
+
+ dma_set_residue(txstate, c->residue);
return ret;
}
@@ -630,7 +646,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
if (!c->is_tx) {
reg |= GCR_STARV_RETRY;
reg |= GCR_DESC_TYPE_HOST;
- reg |= c->q_comp_num;
+ reg |= cdd->td_queue.complete;
}
reg |= GCR_TEARDOWN;
cppi_writel(reg, c->gcr_reg);
@@ -641,7 +657,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
if (!c->td_seen || !c->td_desc_seen) {
desc_phys = cppi41_pop_desc(cdd, cdd->td_queue.complete);
- if (!desc_phys)
+ if (!desc_phys && c->is_tx)
desc_phys = cppi41_pop_desc(cdd, c->q_comp_num);
if (desc_phys == c->desc_phys) {
@@ -723,39 +739,24 @@ static int cppi41_stop_chan(struct dma_chan *chan)
return 0;
}
-static void cleanup_chans(struct cppi41_dd *cdd)
-{
- while (!list_empty(&cdd->ddev.channels)) {
- struct cppi41_channel *cchan;
-
- cchan = list_first_entry(&cdd->ddev.channels,
- struct cppi41_channel, chan.device_node);
- list_del(&cchan->chan.device_node);
- kfree(cchan);
- }
-}
-
static int cppi41_add_chans(struct device *dev, struct cppi41_dd *cdd)
{
- struct cppi41_channel *cchan;
+ struct cppi41_channel *cchan, *chans;
int i;
- int ret;
- u32 n_chans;
+ u32 n_chans = cdd->n_chans;
- ret = of_property_read_u32(dev->of_node, "#dma-channels",
- &n_chans);
- if (ret)
- return ret;
/*
* The channels can only be used as TX or as RX. So we add twice
* that much dma channels because USB can only do RX or TX.
*/
n_chans *= 2;
+ chans = devm_kcalloc(dev, n_chans, sizeof(*chans), GFP_KERNEL);
+ if (!chans)
+ return -ENOMEM;
+
for (i = 0; i < n_chans; i++) {
- cchan = kzalloc(sizeof(*cchan), GFP_KERNEL);
- if (!cchan)
- goto err;
+ cchan = &chans[i];
cchan->cdd = cdd;
if (i & 1) {
@@ -775,9 +776,6 @@ static int cppi41_add_chans(struct device *dev, struct cppi41_dd *cdd)
cdd->first_td_desc = n_chans;
return 0;
-err:
- cleanup_chans(cdd);
- return -ENOMEM;
}
static void purge_descs(struct device *dev, struct cppi41_dd *cdd)
@@ -859,7 +857,7 @@ static void init_sched(struct cppi41_dd *cdd)
word = 0;
cppi_writel(0, cdd->sched_mem + DMA_SCHED_CTRL);
- for (ch = 0; ch < 15 * 2; ch += 2) {
+ for (ch = 0; ch < cdd->n_chans; ch += 2) {
reg = SCHED_ENTRY0_CHAN(ch);
reg |= SCHED_ENTRY1_CHAN(ch) | SCHED_ENTRY1_IS_RX;
@@ -869,7 +867,7 @@ static void init_sched(struct cppi41_dd *cdd)
cppi_writel(reg, cdd->sched_mem + DMA_SCHED_WORD(word));
word++;
}
- reg = 15 * 2 * 2 - 1;
+ reg = cdd->n_chans * 2 - 1;
reg |= DMA_SCHED_CTRL_EN;
cppi_writel(reg, cdd->sched_mem + DMA_SCHED_CTRL);
}
@@ -885,7 +883,7 @@ static int init_cppi41(struct device *dev, struct cppi41_dd *cdd)
return -ENOMEM;
cppi_writel(cdd->scratch_phys, cdd->qmgr_mem + QMGR_LRAM0_BASE);
- cppi_writel(QMGR_SCRATCH_SIZE, cdd->qmgr_mem + QMGR_LRAM_SIZE);
+ cppi_writel(TOTAL_DESCS_NUM, cdd->qmgr_mem + QMGR_LRAM_SIZE);
cppi_writel(0, cdd->qmgr_mem + QMGR_LRAM1_BASE);
ret = init_descs(dev, cdd);
@@ -894,6 +892,7 @@ static int init_cppi41(struct device *dev, struct cppi41_dd *cdd)
cppi_writel(cdd->td_queue.submit, cdd->ctrl_mem + DMA_TDFDQ);
init_sched(cdd);
+
return 0;
err_td:
deinit_cppi41(dev, cdd);
@@ -933,8 +932,9 @@ static bool cpp41_dma_filter_fn(struct dma_chan *chan, void *param)
else
queues = cdd->queues_rx;
- BUILD_BUG_ON(ARRAY_SIZE(usb_queues_rx) != ARRAY_SIZE(usb_queues_tx));
- if (WARN_ON(cchan->port_num > ARRAY_SIZE(usb_queues_rx)))
+ BUILD_BUG_ON(ARRAY_SIZE(am335x_usb_queues_rx) !=
+ ARRAY_SIZE(am335x_usb_queues_tx));
+ if (WARN_ON(cchan->port_num > ARRAY_SIZE(am335x_usb_queues_rx)))
return false;
cchan->q_num = queues[cchan->port_num].submit;
@@ -962,15 +962,25 @@ static struct dma_chan *cppi41_dma_xlate(struct of_phandle_args *dma_spec,
&dma_spec->args[0]);
}
-static const struct cppi_glue_infos usb_infos = {
- .isr = cppi41_irq,
- .queues_rx = usb_queues_rx,
- .queues_tx = usb_queues_tx,
+static const struct cppi_glue_infos am335x_usb_infos = {
+ .queues_rx = am335x_usb_queues_rx,
+ .queues_tx = am335x_usb_queues_tx,
.td_queue = { .submit = 31, .complete = 0 },
+ .first_completion_queue = 93,
+ .qmgr_num_pend = 5,
+};
+
+static const struct cppi_glue_infos da8xx_usb_infos = {
+ .queues_rx = da8xx_usb_queues_rx,
+ .queues_tx = da8xx_usb_queues_tx,
+ .td_queue = { .submit = 31, .complete = 0 },
+ .first_completion_queue = 24,
+ .qmgr_num_pend = 2,
};
static const struct of_device_id cppi41_dma_ids[] = {
- { .compatible = "ti,am3359-cppi41", .data = &usb_infos},
+ { .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos},
+ { .compatible = "ti,da830-cppi41", .data = &da8xx_usb_infos},
{},
};
MODULE_DEVICE_TABLE(of, cppi41_dma_ids);
@@ -995,6 +1005,8 @@ static int cppi41_dma_probe(struct platform_device *pdev)
struct cppi41_dd *cdd;
struct device *dev = &pdev->dev;
const struct cppi_glue_infos *glue_info;
+ struct resource *mem;
+ int index;
int irq;
int ret;
@@ -1021,19 +1033,31 @@ static int cppi41_dma_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&cdd->ddev.channels);
cpp41_dma_info.dma_cap = cdd->ddev.cap_mask;
- cdd->usbss_mem = of_iomap(dev->of_node, 0);
- cdd->ctrl_mem = of_iomap(dev->of_node, 1);
- cdd->sched_mem = of_iomap(dev->of_node, 2);
- cdd->qmgr_mem = of_iomap(dev->of_node, 3);
+ index = of_property_match_string(dev->of_node,
+ "reg-names", "controller");
+ if (index < 0)
+ return index;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, index);
+ cdd->ctrl_mem = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(cdd->ctrl_mem))
+ return PTR_ERR(cdd->ctrl_mem);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, index + 1);
+ cdd->sched_mem = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(cdd->sched_mem))
+ return PTR_ERR(cdd->sched_mem);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, index + 2);
+ cdd->qmgr_mem = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(cdd->qmgr_mem))
+ return PTR_ERR(cdd->qmgr_mem);
+
spin_lock_init(&cdd->lock);
INIT_LIST_HEAD(&cdd->pending);
platform_set_drvdata(pdev, cdd);
- if (!cdd->usbss_mem || !cdd->ctrl_mem || !cdd->sched_mem ||
- !cdd->qmgr_mem)
- return -ENXIO;
-
pm_runtime_enable(dev);
pm_runtime_set_autosuspend_delay(dev, 100);
pm_runtime_use_autosuspend(dev);
@@ -1044,6 +1068,13 @@ static int cppi41_dma_probe(struct platform_device *pdev)
cdd->queues_rx = glue_info->queues_rx;
cdd->queues_tx = glue_info->queues_tx;
cdd->td_queue = glue_info->td_queue;
+ cdd->qmgr_num_pend = glue_info->qmgr_num_pend;
+ cdd->first_completion_queue = glue_info->first_completion_queue;
+
+ ret = of_property_read_u32(dev->of_node,
+ "#dma-channels", &cdd->n_chans);
+ if (ret)
+ goto err_get_n_chans;
ret = init_cppi41(dev, cdd);
if (ret)
@@ -1056,18 +1087,18 @@ static int cppi41_dma_probe(struct platform_device *pdev)
irq = irq_of_parse_and_map(dev->of_node, 0);
if (!irq) {
ret = -EINVAL;
- goto err_irq;
+ goto err_chans;
}
- ret = devm_request_irq(&pdev->dev, irq, glue_info->isr, IRQF_SHARED,
+ ret = devm_request_irq(&pdev->dev, irq, cppi41_irq, IRQF_SHARED,
dev_name(dev), cdd);
if (ret)
- goto err_irq;
+ goto err_chans;
cdd->irq = irq;
ret = dma_async_device_register(&cdd->ddev);
if (ret)
- goto err_dma_reg;
+ goto err_chans;
ret = of_dma_controller_register(dev->of_node,
cppi41_dma_xlate, &cpp41_dma_info);
@@ -1080,20 +1111,14 @@ static int cppi41_dma_probe(struct platform_device *pdev)
return 0;
err_of:
dma_async_device_unregister(&cdd->ddev);
-err_dma_reg:
-err_irq:
- cleanup_chans(cdd);
err_chans:
deinit_cppi41(dev, cdd);
err_init_cppi:
pm_runtime_dont_use_autosuspend(dev);
+err_get_n_chans:
err_get_sync:
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
- iounmap(cdd->usbss_mem);
- iounmap(cdd->ctrl_mem);
- iounmap(cdd->sched_mem);
- iounmap(cdd->qmgr_mem);
return ret;
}
@@ -1110,12 +1135,7 @@ static int cppi41_dma_remove(struct platform_device *pdev)
dma_async_device_unregister(&cdd->ddev);
devm_free_irq(&pdev->dev, cdd->irq, cdd);
- cleanup_chans(cdd);
deinit_cppi41(&pdev->dev, cdd);
- iounmap(cdd->usbss_mem);
- iounmap(cdd->ctrl_mem);
- iounmap(cdd->sched_mem);
- iounmap(cdd->qmgr_mem);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 54d581d..a07ef3d 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -535,6 +535,13 @@ static int dmatest_func(void *data)
total_tests++;
+ /* Check if buffer count fits into map count variable (u8) */
+ if ((src_cnt + dst_cnt) >= 255) {
+ pr_err("too many buffers (%d of 255 supported)\n",
+ src_cnt + dst_cnt);
+ break;
+ }
+
if (1 << align > params->buf_size) {
pr_err("%u-byte buffer too small for %d-byte alignment\n",
params->buf_size, 1 << align);
@@ -585,7 +592,7 @@ static int dmatest_func(void *data)
for (i = 0; i < src_cnt; i++) {
void *buf = thread->srcs[i];
struct page *pg = virt_to_page(buf);
- unsigned pg_off = (unsigned long) buf & ~PAGE_MASK;
+ unsigned long pg_off = offset_in_page(buf);
um->addr[i] = dma_map_page(dev->dev, pg, pg_off,
um->len, DMA_TO_DEVICE);
@@ -605,7 +612,7 @@ static int dmatest_func(void *data)
for (i = 0; i < dst_cnt; i++) {
void *buf = thread->dsts[i];
struct page *pg = virt_to_page(buf);
- unsigned pg_off = (unsigned long) buf & ~PAGE_MASK;
+ unsigned long pg_off = offset_in_page(buf);
dsts[i] = dma_map_page(dev->dev, pg, pg_off, um->len,
DMA_BIDIRECTIONAL);
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d1651a5..085993c 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -937,6 +937,21 @@ static int sdma_disable_channel(struct dma_chan *chan)
return 0;
}
+static int sdma_disable_channel_with_delay(struct dma_chan *chan)
+{
+ sdma_disable_channel(chan);
+
+ /*
+ * According to NXP R&D team a delay of one BD SDMA cost time
+ * (maximum is 1ms) should be added after disable of the channel
+ * bit, to ensure SDMA core has really been stopped after SDMA
+ * clients call .device_terminate_all.
+ */
+ mdelay(1);
+
+ return 0;
+}
+
static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
{
struct sdma_engine *sdma = sdmac->sdma;
@@ -1828,11 +1843,11 @@ static int sdma_probe(struct platform_device *pdev)
sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg;
sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
sdma->dma_device.device_config = sdma_config;
- sdma->dma_device.device_terminate_all = sdma_disable_channel;
+ sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay;
sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
- sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+ sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
sdma->dma_device.device_issue_pending = sdma_issue_pending;
sdma->dma_device.dev->dma_parms = &sdma->dma_parms;
dma_set_max_seg_size(sdma->dma_device.dev, 65535);
diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index cc5259b..6ad4384 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -760,9 +760,7 @@ ioat_init_channel(struct ioatdma_device *ioat_dma,
dma_cookie_init(&ioat_chan->dma_chan);
list_add_tail(&ioat_chan->dma_chan.device_node, &dma->channels);
ioat_dma->idx[idx] = ioat_chan;
- init_timer(&ioat_chan->timer);
- ioat_chan->timer.function = ioat_timer_event;
- ioat_chan->timer.data = data;
+ setup_timer(&ioat_chan->timer, ioat_timer_event, data);
tasklet_init(&ioat_chan->cleanup_task, ioat_cleanup_event, data);
}
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 0cb951b..25bc5b1 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -960,7 +960,7 @@ static int mv_chan_memcpy_self_test(struct mv_xor_chan *mv_chan)
}
src_dma = dma_map_page(dma_chan->device->dev, virt_to_page(src),
- (size_t)src & ~PAGE_MASK, PAGE_SIZE,
+ offset_in_page(src), PAGE_SIZE,
DMA_TO_DEVICE);
unmap->addr[0] = src_dma;
@@ -972,7 +972,7 @@ static int mv_chan_memcpy_self_test(struct mv_xor_chan *mv_chan)
unmap->to_cnt = 1;
dest_dma = dma_map_page(dma_chan->device->dev, virt_to_page(dest),
- (size_t)dest & ~PAGE_MASK, PAGE_SIZE,
+ offset_in_page(dest), PAGE_SIZE,
DMA_FROM_DEVICE);
unmap->addr[1] = dest_dma;
@@ -1580,11 +1580,6 @@ static int mv_xor_probe(struct platform_device *pdev)
int irq;
cd = &pdata->channels[i];
- if (!cd) {
- ret = -ENODEV;
- goto err_channel_add;
- }
-
irq = platform_get_irq(pdev, i);
if (irq < 0) {
ret = irq;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index f37f497..8b0da7f 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -22,7 +22,6 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
#include <linux/scatterlist.h>
#include <linux/of.h>
#include <linux/of_dma.h>
@@ -2077,18 +2076,6 @@ static void pl330_tasklet(unsigned long data)
}
}
-bool pl330_filter(struct dma_chan *chan, void *param)
-{
- u8 *peri_id;
-
- if (chan->device->dev->driver != &pl330_driver.drv)
- return false;
-
- peri_id = chan->private;
- return *peri_id == (unsigned long)param;
-}
-EXPORT_SYMBOL(pl330_filter);
-
static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
{
@@ -2833,7 +2820,6 @@ static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
static int
pl330_probe(struct amba_device *adev, const struct amba_id *id)
{
- struct dma_pl330_platdata *pdat;
struct pl330_config *pcfg;
struct pl330_dmac *pl330;
struct dma_pl330_chan *pch, *_p;
@@ -2843,8 +2829,6 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
int num_chan;
struct device_node *np = adev->dev.of_node;
- pdat = dev_get_platdata(&adev->dev);
-
ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
if (ret)
return ret;
@@ -2857,7 +2841,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pd = &pl330->ddma;
pd->dev = &adev->dev;
- pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
+ pl330->mcbufsz = 0;
/* get quirk */
for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
@@ -2901,10 +2885,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
INIT_LIST_HEAD(&pd->channels);
/* Initialize channel parameters */
- if (pdat)
- num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
- else
- num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
+ num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
pl330->num_peripherals = num_chan;
@@ -2916,11 +2897,8 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
for (i = 0; i < num_chan; i++) {
pch = &pl330->peripherals[i];
- if (!adev->dev.of_node)
- pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
- else
- pch->chan.private = adev->dev.of_node;
+ pch->chan.private = adev->dev.of_node;
INIT_LIST_HEAD(&pch->submitted_list);
INIT_LIST_HEAD(&pch->work_list);
INIT_LIST_HEAD(&pch->completed_list);
@@ -2933,15 +2911,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
list_add_tail(&pch->chan.device_node, &pd->channels);
}
- if (pdat) {
- pd->cap_mask = pdat->cap_mask;
- } else {
- dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- if (pcfg->num_peri) {
- dma_cap_set(DMA_SLAVE, pd->cap_mask);
- dma_cap_set(DMA_CYCLIC, pd->cap_mask);
- dma_cap_set(DMA_PRIVATE, pd->cap_mask);
- }
+ dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ if (pcfg->num_peri) {
+ dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+ dma_cap_set(DMA_PRIVATE, pd->cap_mask);
}
pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 3c982c9..5072a7d 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -865,6 +865,20 @@ static int hidma_probe(struct platform_device *pdev)
return rc;
}
+static void hidma_shutdown(struct platform_device *pdev)
+{
+ struct hidma_dev *dmadev = platform_get_drvdata(pdev);
+
+ dev_info(dmadev->ddev.dev, "HI-DMA engine shutdown\n");
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ if (hidma_ll_disable(dmadev->lldev))
+ dev_warn(dmadev->ddev.dev, "channel did not stop\n");
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+
+}
+
static int hidma_remove(struct platform_device *pdev)
{
struct hidma_dev *dmadev = platform_get_drvdata(pdev);
@@ -908,6 +922,7 @@ MODULE_DEVICE_TABLE(of, hidma_match);
static struct platform_driver hidma_driver = {
.probe = hidma_probe,
.remove = hidma_remove,
+ .shutdown = hidma_shutdown,
.driver = {
.name = "hidma",
.of_match_table = hidma_match,
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 6645bdf..1530a66 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -499,6 +499,9 @@ int hidma_ll_enable(struct hidma_lldev *lldev)
lldev->trch_state = HIDMA_CH_ENABLED;
lldev->evch_state = HIDMA_CH_ENABLED;
+ /* enable irqs */
+ writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+
return 0;
}
@@ -596,6 +599,9 @@ int hidma_ll_disable(struct hidma_lldev *lldev)
lldev->trch_state = HIDMA_CH_SUSPENDED;
lldev->evch_state = HIDMA_CH_SUSPENDED;
+
+ /* disable interrupts */
+ writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
return 0;
}
diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 48b22d5..db41795 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -344,13 +344,19 @@ static void rcar_dmac_chan_start_xfer(struct rcar_dmac_chan *chan)
rcar_dmac_chan_write(chan, RCAR_DMARS, chan->mid_rid);
if (desc->hwdescs.use) {
- struct rcar_dmac_xfer_chunk *chunk;
+ struct rcar_dmac_xfer_chunk *chunk =
+ list_first_entry(&desc->chunks,
+ struct rcar_dmac_xfer_chunk, node);
dev_dbg(chan->chan.device->dev,
"chan%u: queue desc %p: %u@%pad\n",
chan->index, desc, desc->nchunks, &desc->hwdescs.dma);
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ rcar_dmac_chan_write(chan, RCAR_DMAFIXSAR,
+ chunk->src_addr >> 32);
+ rcar_dmac_chan_write(chan, RCAR_DMAFIXDAR,
+ chunk->dst_addr >> 32);
rcar_dmac_chan_write(chan, RCAR_DMAFIXDPBASE,
desc->hwdescs.dma >> 32);
#endif
@@ -368,8 +374,6 @@ static void rcar_dmac_chan_start_xfer(struct rcar_dmac_chan *chan)
* should. Initialize it manually with the destination address
* of the first chunk.
*/
- chunk = list_first_entry(&desc->chunks,
- struct rcar_dmac_xfer_chunk, node);
rcar_dmac_chan_write(chan, RCAR_DMADAR,
chunk->dst_addr & 0xffffffff);
@@ -855,8 +859,12 @@ rcar_dmac_chan_prep_sg(struct rcar_dmac_chan *chan, struct scatterlist *sgl,
unsigned int nchunks = 0;
unsigned int max_chunk_size;
unsigned int full_size = 0;
- bool highmem = false;
+ bool cross_boundary = false;
unsigned int i;
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ u32 high_dev_addr;
+ u32 high_mem_addr;
+#endif
desc = rcar_dmac_desc_get(chan);
if (!desc)
@@ -882,6 +890,16 @@ rcar_dmac_chan_prep_sg(struct rcar_dmac_chan *chan, struct scatterlist *sgl,
full_size += len;
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ if (i == 0) {
+ high_dev_addr = dev_addr >> 32;
+ high_mem_addr = mem_addr >> 32;
+ }
+
+ if ((dev_addr >> 32 != high_dev_addr) ||
+ (mem_addr >> 32 != high_mem_addr))
+ cross_boundary = true;
+#endif
while (len) {
unsigned int size = min(len, max_chunk_size);
@@ -890,18 +908,14 @@ rcar_dmac_chan_prep_sg(struct rcar_dmac_chan *chan, struct scatterlist *sgl,
* Prevent individual transfers from crossing 4GB
* boundaries.
*/
- if (dev_addr >> 32 != (dev_addr + size - 1) >> 32)
+ if (dev_addr >> 32 != (dev_addr + size - 1) >> 32) {
size = ALIGN(dev_addr, 1ULL << 32) - dev_addr;
- if (mem_addr >> 32 != (mem_addr + size - 1) >> 32)
+ cross_boundary = true;
+ }
+ if (mem_addr >> 32 != (mem_addr + size - 1) >> 32) {
size = ALIGN(mem_addr, 1ULL << 32) - mem_addr;
-
- /*
- * Check if either of the source or destination address
- * can't be expressed in 32 bits. If so we can't use
- * hardware descriptor lists.
- */
- if (dev_addr >> 32 || mem_addr >> 32)
- highmem = true;
+ cross_boundary = true;
+ }
#endif
chunk = rcar_dmac_xfer_chunk_get(chan);
@@ -943,13 +957,11 @@ rcar_dmac_chan_prep_sg(struct rcar_dmac_chan *chan, struct scatterlist *sgl,
* Use hardware descriptor lists if possible when more than one chunk
* needs to be transferred (otherwise they don't make much sense).
*
- * The highmem check currently covers the whole transfer. As an
- * optimization we could use descriptor lists for consecutive lowmem
- * chunks and direct manual mode for highmem chunks. Whether the
- * performance improvement would be significant enough compared to the
- * additional complexity remains to be investigated.
+ * Source/Destination address should be located in same 4GiB region
+ * in the 40bit address space when it uses Hardware descriptor,
+ * and cross_boundary is checking it.
*/
- desc->hwdescs.use = !highmem && nchunks > 1;
+ desc->hwdescs.use = !cross_boundary && nchunks > 1;
if (desc->hwdescs.use) {
if (rcar_dmac_fill_hwdesc(chan, desc) < 0)
desc->hwdescs.use = false;
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 49f86ca..786fc8f 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -1008,7 +1008,7 @@ static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
c = dma_get_slave_channel(&chan->vchan.chan);
if (!c) {
- dev_err(dev, "No more channel avalaible\n");
+ dev_err(dev, "No more channels available\n");
return NULL;
}
diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index 57aa227..f4ed3f1 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -238,7 +238,7 @@ static struct sun4i_dma_pchan *find_and_use_pchan(struct sun4i_dma_dev *priv,
}
spin_lock_irqsave(&priv->lock, flags);
- for_each_clear_bit_from(i, &priv->pchans_used, max) {
+ for_each_clear_bit_from(i, priv->pchans_used, max) {
pchan = &pchans[i];
pchan->vchan = vchan;
set_bit(i, priv->pchans_used);
diff --git a/drivers/dma/virt-dma.c b/drivers/dma/virt-dma.c
index e47fc9b..545e972 100644
--- a/drivers/dma/virt-dma.c
+++ b/drivers/dma/virt-dma.c
@@ -86,7 +86,7 @@ EXPORT_SYMBOL_GPL(vchan_find_desc);
static void vchan_complete(unsigned long arg)
{
struct virt_dma_chan *vc = (struct virt_dma_chan *)arg;
- struct virt_dma_desc *vd;
+ struct virt_dma_desc *vd, *_vd;
struct dmaengine_desc_callback cb;
LIST_HEAD(head);
@@ -103,8 +103,7 @@ static void vchan_complete(unsigned long arg)
dmaengine_desc_callback_invoke(&cb, NULL);
- while (!list_empty(&head)) {
- vd = list_first_entry(&head, struct virt_dma_desc, node);
+ list_for_each_entry_safe(vd, _vd, &head, node) {
dmaengine_desc_get_callback(&vd->tx, &cb);
list_del(&vd->node);
@@ -119,9 +118,9 @@ static void vchan_complete(unsigned long arg)
void vchan_dma_desc_free_list(struct virt_dma_chan *vc, struct list_head *head)
{
- while (!list_empty(head)) {
- struct virt_dma_desc *vd = list_first_entry(head,
- struct virt_dma_desc, node);
+ struct virt_dma_desc *vd, *_vd;
+
+ list_for_each_entry_safe(vd, _vd, head, node) {
if (dmaengine_desc_test_reuse(&vd->tx)) {
list_move_tail(&vd->node, &vc->desc_allocated);
} else {
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 8288fe4..8cf87b1 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -331,6 +331,7 @@ struct xilinx_dma_tx_descriptor {
* @seg_v: Statically allocated segments base
* @cyclic_seg_v: Statically allocated segment base for cyclic transfers
* @start_transfer: Differentiate b/w DMA IP's transfer
+ * @stop_transfer: Differentiate b/w DMA IP's quiesce
*/
struct xilinx_dma_chan {
struct xilinx_dma_device *xdev;
@@ -361,6 +362,7 @@ struct xilinx_dma_chan {
struct xilinx_axidma_tx_segment *seg_v;
struct xilinx_axidma_tx_segment *cyclic_seg_v;
void (*start_transfer)(struct xilinx_dma_chan *chan);
+ int (*stop_transfer)(struct xilinx_dma_chan *chan);
u16 tdest;
};
@@ -946,26 +948,32 @@ static bool xilinx_dma_is_idle(struct xilinx_dma_chan *chan)
}
/**
- * xilinx_dma_halt - Halt DMA channel
+ * xilinx_dma_stop_transfer - Halt DMA channel
* @chan: Driver specific DMA channel
*/
-static void xilinx_dma_halt(struct xilinx_dma_chan *chan)
+static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)
{
- int err;
u32 val;
dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
/* Wait for the hardware to halt */
- err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
- (val & XILINX_DMA_DMASR_HALTED), 0,
- XILINX_DMA_LOOP_COUNT);
+ return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
+ val & XILINX_DMA_DMASR_HALTED, 0,
+ XILINX_DMA_LOOP_COUNT);
+}
- if (err) {
- dev_err(chan->dev, "Cannot stop channel %p: %x\n",
- chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
- chan->err = true;
- }
+/**
+ * xilinx_cdma_stop_transfer - Wait for the current transfer to complete
+ * @chan: Driver specific DMA channel
+ */
+static int xilinx_cdma_stop_transfer(struct xilinx_dma_chan *chan)
+{
+ u32 val;
+
+ return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
+ val & XILINX_DMA_DMASR_IDLE, 0,
+ XILINX_DMA_LOOP_COUNT);
}
/**
@@ -1653,7 +1661,7 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
{
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
struct xilinx_dma_tx_descriptor *desc;
- struct xilinx_cdma_tx_segment *segment, *prev;
+ struct xilinx_cdma_tx_segment *segment;
struct xilinx_cdma_desc_hw *hw;
if (!len || len > XILINX_DMA_MAX_TRANS_LEN)
@@ -1680,21 +1688,11 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
hw->dest_addr_msb = upper_32_bits(dma_dst);
}
- /* Fill the previous next descriptor with current */
- prev = list_last_entry(&desc->segments,
- struct xilinx_cdma_tx_segment, node);
- prev->hw.next_desc = segment->phys;
-
/* Insert the segment into the descriptor segments list. */
list_add_tail(&segment->node, &desc->segments);
- prev = segment;
-
- /* Link the last hardware descriptor with the first. */
- segment = list_first_entry(&desc->segments,
- struct xilinx_cdma_tx_segment, node);
desc->async_tx.phys = segment->phys;
- prev->hw.next_desc = segment->phys;
+ hw->next_desc = segment->phys;
return &desc->async_tx;
@@ -2003,12 +2001,17 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
{
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
u32 reg;
+ int err;
if (chan->cyclic)
xilinx_dma_chan_reset(chan);
- /* Halt the DMA engine */
- xilinx_dma_halt(chan);
+ err = chan->stop_transfer(chan);
+ if (err) {
+ dev_err(chan->dev, "Cannot stop channel %p: %x\n",
+ chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
+ chan->err = true;
+ }
/* Remove and free all of the descriptors in the lists */
xilinx_dma_free_descriptors(chan);
@@ -2397,12 +2400,16 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
return err;
}
- if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+ if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
chan->start_transfer = xilinx_dma_start_transfer;
- else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
+ chan->stop_transfer = xilinx_dma_stop_transfer;
+ } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
chan->start_transfer = xilinx_cdma_start_transfer;
- else
+ chan->stop_transfer = xilinx_cdma_stop_transfer;
+ } else {
chan->start_transfer = xilinx_vdma_start_transfer;
+ chan->stop_transfer = xilinx_dma_stop_transfer;
+ }
/* Initialize the tasklet */
tasklet_init(&chan->tasklet, xilinx_dma_do_tasklet,
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 9ad0b19..f6cfc31 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -538,7 +538,7 @@ static int scpi_send_message(u8 idx, void *tx_buf, unsigned int tx_len,
msg->tx_len = tx_len;
msg->rx_buf = rx_buf;
msg->rx_len = rx_len;
- init_completion(&msg->done);
+ reinit_completion(&msg->done);
ret = mbox_send_message(scpi_chan->chan, msg);
if (ret < 0 || !rx_buf)
@@ -872,8 +872,11 @@ static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
return -ENOMEM;
ch->xfers = xfers;
- for (i = 0; i < MAX_SCPI_XFERS; i++, xfers++)
+ for (i = 0; i < MAX_SCPI_XFERS; i++, xfers++) {
+ init_completion(&xfers->done);
list_add_tail(&xfers->node, &ch->xfers_list);
+ }
+
return 0;
}
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
index b0d2549..ff20442 100644
--- a/drivers/firmware/meson/meson_sm.c
+++ b/drivers/firmware/meson/meson_sm.c
@@ -127,6 +127,7 @@ EXPORT_SYMBOL(meson_sm_call);
* meson_sm_call_read - retrieve data from secure-monitor
*
* @buffer: Buffer to store the retrieved data
+ * @bsize: Size of the buffer
* @cmd_index: Index of the SMC32 function ID
* @arg0: SMC32 Argument 0
* @arg1: SMC32 Argument 1
@@ -135,11 +136,14 @@ EXPORT_SYMBOL(meson_sm_call);
* @arg4: SMC32 Argument 4
*
* Return: size of read data on success, a negative value on error
+ * When 0 is returned there is no guarantee about the amount of
+ * data read and bsize bytes are copied in buffer.
*/
-int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0,
- u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+int meson_sm_call_read(void *buffer, unsigned int bsize, unsigned int cmd_index,
+ u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
{
u32 size;
+ int ret;
if (!fw.chip)
return -ENOENT;
@@ -147,16 +151,24 @@ int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0,
if (!fw.chip->cmd_shmem_out_base)
return -EINVAL;
+ if (bsize > fw.chip->shmem_size)
+ return -EINVAL;
+
if (meson_sm_call(cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0)
return -EINVAL;
- if (!size || size > fw.chip->shmem_size)
+ if (size > bsize)
return -EINVAL;
+ ret = size;
+
+ if (!size)
+ size = bsize;
+
if (buffer)
memcpy(buffer, fw.sm_shmem_out_base, size);
- return size;
+ return ret;
}
EXPORT_SYMBOL(meson_sm_call_read);
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 8ad226c..93e3b96 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -578,3 +578,21 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
return ret ? : le32_to_cpu(scm_ret);
}
+
+int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+ u32 spare)
+{
+ return -ENODEV;
+}
+
+int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
+ size_t *size)
+{
+ return -ENODEV;
+}
+
+int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
+ u32 spare)
+{
+ return -ENODEV;
+}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index c933259..6e6d561 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -381,3 +381,61 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
return ret ? : res.a1;
}
+
+int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
+{
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+ int ret;
+
+ desc.args[0] = device_id;
+ desc.args[1] = spare;
+ desc.arginfo = QCOM_SCM_ARGS(2);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
+ &desc, &res);
+
+ return ret ? : res.a1;
+}
+
+int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
+ size_t *size)
+{
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+ int ret;
+
+ desc.args[0] = spare;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
+ QCOM_SCM_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
+
+ if (size)
+ *size = res.a1;
+
+ return ret ? : res.a2;
+}
+
+int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
+ u32 spare)
+{
+ struct qcom_scm_desc desc = {0};
+ struct arm_smccc_res res;
+ int ret;
+
+ desc.args[0] = addr;
+ desc.args[1] = size;
+ desc.args[2] = spare;
+ desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
+ QCOM_SCM_VAL);
+
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
+ QCOM_SCM_IOMMU_SECURE_PTBL_INIT, &desc, &res);
+
+ /* the pg table has been initialized already, ignore the error */
+ if (ret == -EPERM)
+ ret = 0;
+
+ return ret;
+}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index d987bcc..bb16510 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -315,6 +315,24 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
.deassert = qcom_scm_pas_reset_deassert,
};
+int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
+{
+ return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
+}
+EXPORT_SYMBOL(qcom_scm_restore_sec_cfg);
+
+int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
+{
+ return __qcom_scm_iommu_secure_ptbl_size(__scm->dev, spare, size);
+}
+EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_size);
+
+int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
+{
+ return __qcom_scm_iommu_secure_ptbl_init(__scm->dev, addr, size, spare);
+}
+EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
+
/**
* qcom_scm_is_available() - Checks if SCM is available
*/
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 6a0f154..9bea691 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -85,4 +85,15 @@ static inline int qcom_scm_remap_error(int err)
return -EINVAL;
}
+#define QCOM_SCM_SVC_MP 0xc
+#define QCOM_SCM_RESTORE_SEC_CFG 2
+extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+ u32 spare);
+#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE 3
+#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT 4
+extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
+ size_t *size);
+extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
+ u32 size, u32 spare);
+
#endif
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c
index 6d691ab..2ee327d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c
@@ -27,6 +27,9 @@
*/
#include <drm/drmP.h>
#include <drm/amdgpu_drm.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
#include "amdgpu.h"
/*
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index a0ea324..1f178b8 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -2446,7 +2446,7 @@ EXPORT_SYMBOL(drm_fb_helper_hotplug_event);
int __init drm_fb_helper_modinit(void)
{
#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
- const char *name = "fbcon";
+ const char name[] = "fbcon";
struct module *fbcon;
mutex_lock(&module_mutex);
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_dump.c b/drivers/gpu/drm/etnaviv/etnaviv_dump.c
index d019b5e..2d955d7 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_dump.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_dump.c
@@ -161,8 +161,8 @@ void etnaviv_core_dump(struct etnaviv_gpu *gpu)
file_size += sizeof(*iter.hdr) * n_obj;
/* Allocate the file in vmalloc memory, it's likely to be big */
- iter.start = __vmalloc(file_size, GFP_KERNEL | __GFP_HIGHMEM |
- __GFP_NOWARN | __GFP_NORETRY, PAGE_KERNEL);
+ iter.start = __vmalloc(file_size, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY,
+ PAGE_KERNEL);
if (!iter.start) {
dev_warn(gpu->dev, "failed to allocate devcoredump file\n");
return;
diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c
index 3f4f424..3949b09 100644
--- a/drivers/gpu/drm/gma500/gtt.c
+++ b/drivers/gpu/drm/gma500/gtt.c
@@ -21,6 +21,7 @@
#include <drm/drmP.h>
#include <linux/shmem_fs.h>
+#include <asm/set_memory.h>
#include "psb_drv.h"
#include "blitter.h"
diff --git a/drivers/gpu/drm/gma500/psb_drv.c b/drivers/gpu/drm/gma500/psb_drv.c
index 5ee93ff..1f9b35a 100644
--- a/drivers/gpu/drm/gma500/psb_drv.c
+++ b/drivers/gpu/drm/gma500/psb_drv.c
@@ -35,6 +35,7 @@
#include <linux/pm_runtime.h>
#include <acpi/video.h>
#include <linux/module.h>
+#include <asm/set_memory.h>
static struct drm_driver driver;
static int psb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 8bab4ae..2aa6b97 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -31,6 +31,8 @@
#include <linux/seq_file.h>
#include <linux/stop_machine.h>
+#include <asm/set_memory.h>
+
#include <drm/drmP.h>
#include <drm/i915_drm.h>
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index ca5397b..2170534 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -568,9 +568,7 @@ u_memcpya(uint64_t user, unsigned nmemb, unsigned size)
size *= nmemb;
- mem = kmalloc(size, GFP_KERNEL | __GFP_NOWARN);
- if (!mem)
- mem = vmalloc(size);
+ mem = kvmalloc(size, GFP_KERNEL);
if (!mem)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index c4777c8..0b3ec35 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -27,6 +27,9 @@
*/
#include <drm/drmP.h>
#include <drm/radeon_drm.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
#include "radeon.h"
/*
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index a37de5d..eeddc1e 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -51,6 +51,9 @@
#if IS_ENABLED(CONFIG_AGP)
#include <asm/agp.h>
#endif
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
#define NUM_PAGES_TO_ALLOC (PAGE_SIZE/sizeof(struct page *))
#define SMALL_ALLOCATION 16
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c b/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c
index cec4b4b..90ddbdc 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c
@@ -53,6 +53,9 @@
#if IS_ENABLED(CONFIG_AGP)
#include <asm/agp.h>
#endif
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
#define NUM_PAGES_TO_ALLOC (PAGE_SIZE/sizeof(struct page *))
#define SMALL_ALLOCATION 4
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index aee3c00..5260179 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -44,6 +44,9 @@
#include <drm/ttm/ttm_bo_driver.h>
#include <drm/ttm/ttm_placement.h>
#include <drm/ttm/ttm_page_alloc.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
/**
* Allocates storage for pointers to the pages that back the ttm.
diff --git a/drivers/hwtracing/intel_th/msu.c b/drivers/hwtracing/intel_th/msu.c
index e88afe1..dbbe31d 100644
--- a/drivers/hwtracing/intel_th/msu.c
+++ b/drivers/hwtracing/intel_th/msu.c
@@ -27,7 +27,9 @@
#include <linux/io.h>
#include <linux/dma-mapping.h>
-#include <asm/cacheflush.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
#include "intel_th.h"
#include "msu.h"
diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index 0f6916d..5d6b1ee 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -1055,7 +1055,7 @@ static void handle_pio_err(struct hfi1_devdata *dd, u32 unused, u64 reg);
static void handle_sdma_err(struct hfi1_devdata *dd, u32 unused, u64 reg);
static void handle_egress_err(struct hfi1_devdata *dd, u32 unused, u64 reg);
static void handle_txe_err(struct hfi1_devdata *dd, u32 unused, u64 reg);
-static void set_partition_keys(struct hfi1_pportdata *);
+static void set_partition_keys(struct hfi1_pportdata *ppd);
static const char *link_state_name(u32 state);
static const char *link_state_reason_name(struct hfi1_pportdata *ppd,
u32 state);
@@ -1068,9 +1068,9 @@ static int wait_logical_linkstate(struct hfi1_pportdata *ppd, u32 state,
int msecs);
static void read_planned_down_reason_code(struct hfi1_devdata *dd, u8 *pdrrc);
static void read_link_down_reason(struct hfi1_devdata *dd, u8 *ldr);
-static void handle_temp_err(struct hfi1_devdata *);
-static void dc_shutdown(struct hfi1_devdata *);
-static void dc_start(struct hfi1_devdata *);
+static void handle_temp_err(struct hfi1_devdata *dd);
+static void dc_shutdown(struct hfi1_devdata *dd);
+static void dc_start(struct hfi1_devdata *dd);
static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp,
unsigned int *np);
static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd);
@@ -10233,7 +10233,7 @@ static int goto_offline(struct hfi1_pportdata *ppd, u8 rem_reason)
if (pstate == PLS_OFFLINE) {
do_transition = 0; /* in right state */
do_wait = 0; /* ...no need to wait */
- } else if ((pstate & 0xff) == PLS_OFFLINE) {
+ } else if ((pstate & 0xf0) == PLS_OFFLINE) {
do_transition = 0; /* in an offline transient state */
do_wait = 1; /* ...wait for it to settle */
} else {
@@ -12662,7 +12662,7 @@ u8 hfi1_ibphys_portstate(struct hfi1_pportdata *ppd)
#define SET_STATIC_RATE_CONTROL_SMASK(r) \
(r |= SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK)
-int hfi1_init_ctxt(struct send_context *sc)
+void hfi1_init_ctxt(struct send_context *sc)
{
if (sc) {
struct hfi1_devdata *dd = sc->dd;
@@ -12679,7 +12679,6 @@ int hfi1_init_ctxt(struct send_context *sc)
write_kctxt_csr(dd, sc->hw_context,
SEND_CTXT_CHECK_ENABLE, reg);
}
- return 0;
}
int hfi1_tempsense_rd(struct hfi1_devdata *dd, struct hfi1_temp *temp)
@@ -13841,14 +13840,14 @@ static void init_chip(struct hfi1_devdata *dd)
dd_dev_info(dd, "Resetting CSRs with FLR\n");
/* do the FLR, the DC reset will remain */
- hfi1_pcie_flr(dd);
+ pcie_flr(dd->pcidev);
/* restore command and BARs */
restore_pci_variables(dd);
if (is_ax(dd)) {
dd_dev_info(dd, "Resetting CSRs with FLR\n");
- hfi1_pcie_flr(dd);
+ pcie_flr(dd->pcidev);
restore_pci_variables(dd);
}
} else {
@@ -14528,30 +14527,24 @@ int hfi1_set_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt, u16 pkey)
return ret;
}
-int hfi1_clear_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt)
+int hfi1_clear_ctxt_pkey(struct hfi1_devdata *dd, struct hfi1_ctxtdata *ctxt)
{
- struct hfi1_ctxtdata *rcd;
- unsigned sctxt;
- int ret = 0;
+ u8 hw_ctxt;
u64 reg;
- if (ctxt < dd->num_rcv_contexts) {
- rcd = dd->rcd[ctxt];
- } else {
- ret = -EINVAL;
- goto done;
- }
- if (!rcd || !rcd->sc) {
- ret = -EINVAL;
- goto done;
- }
- sctxt = rcd->sc->hw_context;
- reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE);
+ if (!ctxt || !ctxt->sc)
+ return -EINVAL;
+
+ if (ctxt->ctxt >= dd->num_rcv_contexts)
+ return -EINVAL;
+
+ hw_ctxt = ctxt->sc->hw_context;
+ reg = read_kctxt_csr(dd, hw_ctxt, SEND_CTXT_CHECK_ENABLE);
reg &= ~SEND_CTXT_CHECK_ENABLE_CHECK_PARTITION_KEY_SMASK;
- write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg);
- write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_PARTITION_KEY, 0);
-done:
- return ret;
+ write_kctxt_csr(dd, hw_ctxt, SEND_CTXT_CHECK_ENABLE, reg);
+ write_kctxt_csr(dd, hw_ctxt, SEND_CTXT_CHECK_PARTITION_KEY, 0);
+
+ return 0;
}
/*
diff --git a/drivers/infiniband/hw/hfi1/chip.h b/drivers/infiniband/hw/hfi1/chip.h
index b9dbf16..cbe455d 100644
--- a/drivers/infiniband/hw/hfi1/chip.h
+++ b/drivers/infiniband/hw/hfi1/chip.h
@@ -636,7 +636,8 @@ static inline void write_uctxt_csr(struct hfi1_devdata *dd, int ctxt,
write_csr(dd, offset0 + (0x1000 * ctxt), value);
}
-u64 create_pbc(struct hfi1_pportdata *ppd, u64, int, u32, u32);
+u64 create_pbc(struct hfi1_pportdata *ppd, u64 flags, int srate_mbs, u32 vl,
+ u32 dw_len);
/* firmware.c */
#define SBUS_MASTER_BROADCAST 0xfd
@@ -728,7 +729,8 @@ int bringup_serdes(struct hfi1_pportdata *ppd);
void set_intr_state(struct hfi1_devdata *dd, u32 enable);
void apply_link_downgrade_policy(struct hfi1_pportdata *ppd,
int refresh_widths);
-void update_usrhead(struct hfi1_ctxtdata *, u32, u32, u32, u32, u32);
+void update_usrhead(struct hfi1_ctxtdata *rcd, u32 hd, u32 updegr, u32 egrhd,
+ u32 intr_adjust, u32 npkts);
int stop_drain_data_vls(struct hfi1_devdata *dd);
int open_fill_data_vls(struct hfi1_devdata *dd);
u32 ns_to_cclock(struct hfi1_devdata *dd, u32 ns);
@@ -1347,7 +1349,7 @@ void hfi1_start_cleanup(struct hfi1_devdata *dd);
void hfi1_clear_tids(struct hfi1_ctxtdata *rcd);
struct ib_header *hfi1_get_msgheader(
struct hfi1_devdata *dd, __le32 *rhf_addr);
-int hfi1_init_ctxt(struct send_context *sc);
+void hfi1_init_ctxt(struct send_context *sc);
void hfi1_put_tid(struct hfi1_devdata *dd, u32 index,
u32 type, unsigned long pa, u16 order);
void hfi1_quiet_serdes(struct hfi1_pportdata *ppd);
@@ -1360,7 +1362,7 @@ int hfi1_set_ib_cfg(struct hfi1_pportdata *ppd, int which, u32 val);
int hfi1_set_ctxt_jkey(struct hfi1_devdata *dd, unsigned ctxt, u16 jkey);
int hfi1_clear_ctxt_jkey(struct hfi1_devdata *dd, unsigned ctxt);
int hfi1_set_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt, u16 pkey);
-int hfi1_clear_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt);
+int hfi1_clear_ctxt_pkey(struct hfi1_devdata *dd, struct hfi1_ctxtdata *ctxt);
void hfi1_read_link_quality(struct hfi1_devdata *dd, u8 *link_quality);
void hfi1_init_vnic_rsm(struct hfi1_devdata *dd);
void hfi1_deinit_vnic_rsm(struct hfi1_devdata *dd);
diff --git a/drivers/infiniband/hw/hfi1/driver.c b/drivers/infiniband/hw/hfi1/driver.c
index 5278954..a50870e 100644
--- a/drivers/infiniband/hw/hfi1/driver.c
+++ b/drivers/infiniband/hw/hfi1/driver.c
@@ -85,8 +85,8 @@ module_param_named(cu, hfi1_cu, uint, S_IRUGO);
MODULE_PARM_DESC(cu, "Credit return units");
unsigned long hfi1_cap_mask = HFI1_CAP_MASK_DEFAULT;
-static int hfi1_caps_set(const char *, const struct kernel_param *);
-static int hfi1_caps_get(char *, const struct kernel_param *);
+static int hfi1_caps_set(const char *val, const struct kernel_param *kp);
+static int hfi1_caps_get(char *buffer, const struct kernel_param *kp);
static const struct kernel_param_ops cap_ops = {
.set = hfi1_caps_set,
.get = hfi1_caps_get
@@ -211,42 +211,6 @@ int hfi1_count_active_units(void)
}
/*
- * Return count of all units, optionally return in arguments
- * the number of usable (present) units, and the number of
- * ports that are up.
- */
-int hfi1_count_units(int *npresentp, int *nupp)
-{
- int nunits = 0, npresent = 0, nup = 0;
- struct hfi1_devdata *dd;
- unsigned long flags;
- int pidx;
- struct hfi1_pportdata *ppd;
-
- spin_lock_irqsave(&hfi1_devs_lock, flags);
-
- list_for_each_entry(dd, &hfi1_dev_list, list) {
- nunits++;
- if ((dd->flags & HFI1_PRESENT) && dd->kregbase)
- npresent++;
- for (pidx = 0; pidx < dd->num_pports; ++pidx) {
- ppd = dd->pport + pidx;
- if (ppd->lid && ppd->linkup)
- nup++;
- }
- }
-
- spin_unlock_irqrestore(&hfi1_devs_lock, flags);
-
- if (npresentp)
- *npresentp = npresent;
- if (nupp)
- *nupp = nup;
-
- return nunits;
-}
-
-/*
* Get address of eager buffer from it's index (allocated in chunks, not
* contiguous).
*/
@@ -1325,7 +1289,7 @@ int hfi1_reset_device(int unit)
if (dd->rcd)
for (i = dd->first_dyn_alloc_ctxt;
i < dd->num_rcv_contexts; i++) {
- if (!dd->rcd[i] || !dd->rcd[i]->cnt)
+ if (!dd->rcd[i])
continue;
spin_unlock_irqrestore(&dd->uctxt_lock, flags);
ret = -EBUSY;
diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c
index 3d9bce4..3158128 100644
--- a/drivers/infiniband/hw/hfi1/file_ops.c
+++ b/drivers/infiniband/hw/hfi1/file_ops.c
@@ -49,6 +49,7 @@
#include <linux/vmalloc.h>
#include <linux/io.h>
#include <linux/sched/mm.h>
+#include <linux/bitmap.h>
#include <rdma/ib.h>
@@ -70,30 +71,37 @@
/*
* File operation functions
*/
-static int hfi1_file_open(struct inode *, struct file *);
-static int hfi1_file_close(struct inode *, struct file *);
-static ssize_t hfi1_write_iter(struct kiocb *, struct iov_iter *);
-static unsigned int hfi1_poll(struct file *, struct poll_table_struct *);
-static int hfi1_file_mmap(struct file *, struct vm_area_struct *);
+static int hfi1_file_open(struct inode *inode, struct file *fp);
+static int hfi1_file_close(struct inode *inode, struct file *fp);
+static ssize_t hfi1_write_iter(struct kiocb *kiocb, struct iov_iter *from);
+static unsigned int hfi1_poll(struct file *fp, struct poll_table_struct *pt);
+static int hfi1_file_mmap(struct file *fp, struct vm_area_struct *vma);
-static u64 kvirt_to_phys(void *);
-static int assign_ctxt(struct file *, struct hfi1_user_info *);
-static int init_subctxts(struct hfi1_ctxtdata *, const struct hfi1_user_info *);
-static int user_init(struct file *);
-static int get_ctxt_info(struct file *, void __user *, __u32);
-static int get_base_info(struct file *, void __user *, __u32);
-static int setup_ctxt(struct file *);
-static int setup_subctxt(struct hfi1_ctxtdata *);
-static int get_user_context(struct file *, struct hfi1_user_info *, int);
-static int find_shared_ctxt(struct file *, const struct hfi1_user_info *);
-static int allocate_ctxt(struct file *, struct hfi1_devdata *,
- struct hfi1_user_info *);
-static unsigned int poll_urgent(struct file *, struct poll_table_struct *);
-static unsigned int poll_next(struct file *, struct poll_table_struct *);
-static int user_event_ack(struct hfi1_ctxtdata *, int, unsigned long);
-static int set_ctxt_pkey(struct hfi1_ctxtdata *, unsigned, u16);
-static int manage_rcvq(struct hfi1_ctxtdata *, unsigned, int);
-static int vma_fault(struct vm_fault *);
+static u64 kvirt_to_phys(void *addr);
+static int assign_ctxt(struct hfi1_filedata *fd, struct hfi1_user_info *uinfo);
+static int init_subctxts(struct hfi1_ctxtdata *uctxt,
+ const struct hfi1_user_info *uinfo);
+static int init_user_ctxt(struct hfi1_filedata *fd);
+static void user_init(struct hfi1_ctxtdata *uctxt);
+static int get_ctxt_info(struct hfi1_filedata *fd, void __user *ubase,
+ __u32 len);
+static int get_base_info(struct hfi1_filedata *fd, void __user *ubase,
+ __u32 len);
+static int setup_base_ctxt(struct hfi1_filedata *fd);
+static int setup_subctxt(struct hfi1_ctxtdata *uctxt);
+
+static int find_sub_ctxt(struct hfi1_filedata *fd,
+ const struct hfi1_user_info *uinfo);
+static int allocate_ctxt(struct hfi1_filedata *fd, struct hfi1_devdata *dd,
+ struct hfi1_user_info *uinfo);
+static unsigned int poll_urgent(struct file *fp, struct poll_table_struct *pt);
+static unsigned int poll_next(struct file *fp, struct poll_table_struct *pt);
+static int user_event_ack(struct hfi1_ctxtdata *uctxt, u16 subctxt,
+ unsigned long events);
+static int set_ctxt_pkey(struct hfi1_ctxtdata *uctxt, u16 subctxt, u16 pkey);
+static int manage_rcvq(struct hfi1_ctxtdata *uctxt, u16 subctxt,
+ int start_stop);
+static int vma_fault(struct vm_fault *vmf);
static long hfi1_file_ioctl(struct file *fp, unsigned int cmd,
unsigned long arg);
@@ -173,6 +181,9 @@ static int hfi1_file_open(struct inode *inode, struct file *fp)
struct hfi1_devdata,
user_cdev);
+ if (!((dd->flags & HFI1_PRESENT) && dd->kregbase))
+ return -EINVAL;
+
if (!atomic_inc_not_zero(&dd->user_refcount))
return -ENXIO;
@@ -187,6 +198,7 @@ static int hfi1_file_open(struct inode *inode, struct file *fp)
fd->rec_cpu_num = -1; /* no cpu affinity by default */
fd->mm = current->mm;
mmgrab(fd->mm);
+ fd->dd = dd;
fp->private_data = fd;
} else {
fp->private_data = NULL;
@@ -229,20 +241,14 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd,
sizeof(uinfo)))
return -EFAULT;
- ret = assign_ctxt(fp, &uinfo);
- if (ret < 0)
- return ret;
- ret = setup_ctxt(fp);
- if (ret)
- return ret;
- ret = user_init(fp);
+ ret = assign_ctxt(fd, &uinfo);
break;
case HFI1_IOCTL_CTXT_INFO:
- ret = get_ctxt_info(fp, (void __user *)(unsigned long)arg,
+ ret = get_ctxt_info(fd, (void __user *)(unsigned long)arg,
sizeof(struct hfi1_ctxt_info));
break;
case HFI1_IOCTL_USER_INFO:
- ret = get_base_info(fp, (void __user *)(unsigned long)arg,
+ ret = get_base_info(fd, (void __user *)(unsigned long)arg,
sizeof(struct hfi1_base_info));
break;
case HFI1_IOCTL_CREDIT_UPD:
@@ -256,7 +262,7 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd,
sizeof(tinfo)))
return -EFAULT;
- ret = hfi1_user_exp_rcv_setup(fp, &tinfo);
+ ret = hfi1_user_exp_rcv_setup(fd, &tinfo);
if (!ret) {
/*
* Copy the number of tidlist entries we used
@@ -278,7 +284,7 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd,
sizeof(tinfo)))
return -EFAULT;
- ret = hfi1_user_exp_rcv_clear(fp, &tinfo);
+ ret = hfi1_user_exp_rcv_clear(fd, &tinfo);
if (ret)
break;
addr = arg + offsetof(struct hfi1_tid_info, tidcnt);
@@ -293,7 +299,7 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd,
sizeof(tinfo)))
return -EFAULT;
- ret = hfi1_user_exp_rcv_invalid(fp, &tinfo);
+ ret = hfi1_user_exp_rcv_invalid(fd, &tinfo);
if (ret)
break;
addr = arg + offsetof(struct hfi1_tid_info, tidcnt);
@@ -430,7 +436,7 @@ static ssize_t hfi1_write_iter(struct kiocb *kiocb, struct iov_iter *from)
unsigned long count = 0;
ret = hfi1_user_sdma_process_request(
- kiocb->ki_filp, (struct iovec *)(from->iov + done),
+ fd, (struct iovec *)(from->iov + done),
dim, &count);
if (ret) {
reqs = ret;
@@ -756,6 +762,9 @@ static int hfi1_file_close(struct inode *inode, struct file *fp)
/* release the cpu */
hfi1_put_proc_affinity(fdata->rec_cpu_num);
+ /* clean up rcv side */
+ hfi1_user_exp_rcv_free(fdata);
+
/*
* Clear any left over, unhandled events so the next process that
* gets this context doesn't get confused.
@@ -764,8 +773,8 @@ static int hfi1_file_close(struct inode *inode, struct file *fp)
HFI1_MAX_SHARED_CTXTS) + fdata->subctxt;
*ev = 0;
- if (--uctxt->cnt) {
- uctxt->active_slaves &= ~(1 << fdata->subctxt);
+ __clear_bit(fdata->subctxt, uctxt->in_use_ctxts);
+ if (!bitmap_empty(uctxt->in_use_ctxts, HFI1_MAX_SHARED_CTXTS)) {
mutex_unlock(&hfi1_mutex);
goto done;
}
@@ -795,8 +804,8 @@ static int hfi1_file_close(struct inode *inode, struct file *fp)
dd->rcd[uctxt->ctxt] = NULL;
- hfi1_user_exp_rcv_free(fdata);
- hfi1_clear_ctxt_pkey(dd, uctxt->ctxt);
+ hfi1_user_exp_rcv_grp_free(uctxt);
+ hfi1_clear_ctxt_pkey(dd, uctxt);
uctxt->rcvwait_to = 0;
uctxt->piowait_to = 0;
@@ -836,127 +845,135 @@ static u64 kvirt_to_phys(void *addr)
return paddr;
}
-static int assign_ctxt(struct file *fp, struct hfi1_user_info *uinfo)
+static int assign_ctxt(struct hfi1_filedata *fd, struct hfi1_user_info *uinfo)
{
- int i_minor, ret = 0;
+ int ret;
unsigned int swmajor, swminor;
swmajor = uinfo->userversion >> 16;
- if (swmajor != HFI1_USER_SWMAJOR) {
- ret = -ENODEV;
- goto done;
- }
+ if (swmajor != HFI1_USER_SWMAJOR)
+ return -ENODEV;
swminor = uinfo->userversion & 0xffff;
mutex_lock(&hfi1_mutex);
- /* First, lets check if we need to setup a shared context? */
+ /*
+ * Get a sub context if necessary.
+ * ret < 0 error, 0 no context, 1 sub-context found
+ */
+ ret = 0;
if (uinfo->subctxt_cnt) {
- struct hfi1_filedata *fd = fp->private_data;
-
- ret = find_shared_ctxt(fp, uinfo);
- if (ret < 0)
- goto done_unlock;
- if (ret) {
+ ret = find_sub_ctxt(fd, uinfo);
+ if (ret > 0)
fd->rec_cpu_num =
hfi1_get_proc_affinity(fd->uctxt->numa_id);
- }
}
/*
- * We execute the following block if we couldn't find a
- * shared context or if context sharing is not required.
+ * Allocate a base context if context sharing is not required or we
+ * couldn't find a sub context.
*/
- if (!ret) {
- i_minor = iminor(file_inode(fp)) - HFI1_USER_MINOR_BASE;
- ret = get_user_context(fp, uinfo, i_minor);
- }
-done_unlock:
+ if (!ret)
+ ret = allocate_ctxt(fd, fd->dd, uinfo);
+
mutex_unlock(&hfi1_mutex);
-done:
- return ret;
-}
-static int get_user_context(struct file *fp, struct hfi1_user_info *uinfo,
- int devno)
-{
- struct hfi1_devdata *dd = NULL;
- int devmax, npresent, nup;
+ /* Depending on the context type, do the appropriate init */
+ if (ret > 0) {
+ /*
+ * sub-context info can only be set up after the base
+ * context has been completed.
+ */
+ ret = wait_event_interruptible(fd->uctxt->wait, !test_bit(
+ HFI1_CTXT_BASE_UNINIT,
+ &fd->uctxt->event_flags));
+ if (test_bit(HFI1_CTXT_BASE_FAILED, &fd->uctxt->event_flags)) {
+ clear_bit(fd->subctxt, fd->uctxt->in_use_ctxts);
+ return -ENOMEM;
+ }
+ /* The only thing a sub context needs is the user_xxx stuff */
+ if (!ret)
+ ret = init_user_ctxt(fd);
- devmax = hfi1_count_units(&npresent, &nup);
- if (!npresent)
- return -ENXIO;
-
- if (!nup)
- return -ENETDOWN;
-
- dd = hfi1_lookup(devno);
- if (!dd)
- return -ENODEV;
- else if (!dd->freectxts)
- return -EBUSY;
-
- return allocate_ctxt(fp, dd, uinfo);
-}
-
-static int find_shared_ctxt(struct file *fp,
- const struct hfi1_user_info *uinfo)
-{
- int devmax, ndev, i;
- int ret = 0;
- struct hfi1_filedata *fd = fp->private_data;
-
- devmax = hfi1_count_units(NULL, NULL);
-
- for (ndev = 0; ndev < devmax; ndev++) {
- struct hfi1_devdata *dd = hfi1_lookup(ndev);
-
- if (!(dd && (dd->flags & HFI1_PRESENT) && dd->kregbase))
- continue;
- for (i = dd->first_dyn_alloc_ctxt;
- i < dd->num_rcv_contexts; i++) {
- struct hfi1_ctxtdata *uctxt = dd->rcd[i];
-
- /* Skip ctxts which are not yet open */
- if (!uctxt || !uctxt->cnt)
- continue;
-
- /* Skip dynamically allocted kernel contexts */
- if (uctxt->sc && (uctxt->sc->type == SC_KERNEL))
- continue;
-
- /* Skip ctxt if it doesn't match the requested one */
- if (memcmp(uctxt->uuid, uinfo->uuid,
- sizeof(uctxt->uuid)) ||
- uctxt->jkey != generate_jkey(current_uid()) ||
- uctxt->subctxt_id != uinfo->subctxt_id ||
- uctxt->subctxt_cnt != uinfo->subctxt_cnt)
- continue;
-
- /* Verify the sharing process matches the master */
- if (uctxt->userversion != uinfo->userversion ||
- uctxt->cnt >= uctxt->subctxt_cnt) {
- ret = -EINVAL;
- goto done;
- }
- fd->uctxt = uctxt;
- fd->subctxt = uctxt->cnt++;
- uctxt->active_slaves |= 1 << fd->subctxt;
- ret = 1;
- goto done;
+ if (ret)
+ clear_bit(fd->subctxt, fd->uctxt->in_use_ctxts);
+ } else if (!ret) {
+ ret = setup_base_ctxt(fd);
+ if (fd->uctxt->subctxt_cnt) {
+ /* If there is an error, set the failed bit. */
+ if (ret)
+ set_bit(HFI1_CTXT_BASE_FAILED,
+ &fd->uctxt->event_flags);
+ /*
+ * Base context is done, notify anybody using a
+ * sub-context that is waiting for this completion
+ */
+ clear_bit(HFI1_CTXT_BASE_UNINIT,
+ &fd->uctxt->event_flags);
+ wake_up(&fd->uctxt->wait);
}
}
-done:
return ret;
}
-static int allocate_ctxt(struct file *fp, struct hfi1_devdata *dd,
+/*
+ * The hfi1_mutex must be held when this function is called. It is
+ * necessary to ensure serialized access to the bitmask in_use_ctxts.
+ */
+static int find_sub_ctxt(struct hfi1_filedata *fd,
+ const struct hfi1_user_info *uinfo)
+{
+ int i;
+ struct hfi1_devdata *dd = fd->dd;
+ u16 subctxt;
+
+ for (i = dd->first_dyn_alloc_ctxt; i < dd->num_rcv_contexts; i++) {
+ struct hfi1_ctxtdata *uctxt = dd->rcd[i];
+
+ /* Skip ctxts which are not yet open */
+ if (!uctxt ||
+ bitmap_empty(uctxt->in_use_ctxts,
+ HFI1_MAX_SHARED_CTXTS))
+ continue;
+
+ /* Skip dynamically allocted kernel contexts */
+ if (uctxt->sc && (uctxt->sc->type == SC_KERNEL))
+ continue;
+
+ /* Skip ctxt if it doesn't match the requested one */
+ if (memcmp(uctxt->uuid, uinfo->uuid,
+ sizeof(uctxt->uuid)) ||
+ uctxt->jkey != generate_jkey(current_uid()) ||
+ uctxt->subctxt_id != uinfo->subctxt_id ||
+ uctxt->subctxt_cnt != uinfo->subctxt_cnt)
+ continue;
+
+ /* Verify the sharing process matches the master */
+ if (uctxt->userversion != uinfo->userversion)
+ return -EINVAL;
+
+ /* Find an unused context */
+ subctxt = find_first_zero_bit(uctxt->in_use_ctxts,
+ HFI1_MAX_SHARED_CTXTS);
+ if (subctxt >= uctxt->subctxt_cnt)
+ return -EBUSY;
+
+ fd->uctxt = uctxt;
+ fd->subctxt = subctxt;
+ __set_bit(fd->subctxt, uctxt->in_use_ctxts);
+
+ return 1;
+ }
+
+ return 0;
+}
+
+static int allocate_ctxt(struct hfi1_filedata *fd, struct hfi1_devdata *dd,
struct hfi1_user_info *uinfo)
{
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt;
- unsigned ctxt;
+ unsigned int ctxt;
int ret, numa;
if (dd->flags & HFI1_FROZEN) {
@@ -970,6 +987,14 @@ static int allocate_ctxt(struct file *fp, struct hfi1_devdata *dd,
return -EIO;
}
+ /*
+ * This check is sort of redundant to the next EBUSY error. It would
+ * also indicate an inconsistancy in the driver if this value was
+ * zero, but there were still contexts available.
+ */
+ if (!dd->freectxts)
+ return -EBUSY;
+
for (ctxt = dd->first_dyn_alloc_ctxt;
ctxt < dd->num_rcv_contexts; ctxt++)
if (!dd->rcd[ctxt])
@@ -1013,12 +1038,12 @@ static int allocate_ctxt(struct file *fp, struct hfi1_devdata *dd,
goto ctxdata_free;
/*
- * Setup shared context resources if the user-level has requested
- * shared contexts and this is the 'master' process.
+ * Setup sub context resources if the user-level has requested
+ * sub contexts.
* This has to be done here so the rest of the sub-contexts find the
* proper master.
*/
- if (uinfo->subctxt_cnt && !fd->subctxt) {
+ if (uinfo->subctxt_cnt) {
ret = init_subctxts(uctxt, uinfo);
/*
* On error, we don't need to disable and de-allocate the
@@ -1055,7 +1080,7 @@ static int allocate_ctxt(struct file *fp, struct hfi1_devdata *dd,
static int init_subctxts(struct hfi1_ctxtdata *uctxt,
const struct hfi1_user_info *uinfo)
{
- unsigned num_subctxts;
+ u16 num_subctxts;
num_subctxts = uinfo->subctxt_cnt;
if (num_subctxts > HFI1_MAX_SHARED_CTXTS)
@@ -1063,9 +1088,8 @@ static int init_subctxts(struct hfi1_ctxtdata *uctxt,
uctxt->subctxt_cnt = uinfo->subctxt_cnt;
uctxt->subctxt_id = uinfo->subctxt_id;
- uctxt->active_slaves = 1;
uctxt->redirect_seq_cnt = 1;
- set_bit(HFI1_CTXT_MASTER_UNINIT, &uctxt->event_flags);
+ set_bit(HFI1_CTXT_BASE_UNINIT, &uctxt->event_flags);
return 0;
}
@@ -1073,13 +1097,12 @@ static int init_subctxts(struct hfi1_ctxtdata *uctxt,
static int setup_subctxt(struct hfi1_ctxtdata *uctxt)
{
int ret = 0;
- unsigned num_subctxts = uctxt->subctxt_cnt;
+ u16 num_subctxts = uctxt->subctxt_cnt;
uctxt->subctxt_uregbase = vmalloc_user(PAGE_SIZE);
- if (!uctxt->subctxt_uregbase) {
- ret = -ENOMEM;
- goto bail;
- }
+ if (!uctxt->subctxt_uregbase)
+ return -ENOMEM;
+
/* We can take the size of the RcvHdr Queue from the master */
uctxt->subctxt_rcvhdr_base = vmalloc_user(uctxt->rcvhdrq_size *
num_subctxts);
@@ -1094,25 +1117,22 @@ static int setup_subctxt(struct hfi1_ctxtdata *uctxt)
ret = -ENOMEM;
goto bail_rhdr;
}
- goto bail;
+
+ return 0;
+
bail_rhdr:
vfree(uctxt->subctxt_rcvhdr_base);
+ uctxt->subctxt_rcvhdr_base = NULL;
bail_ureg:
vfree(uctxt->subctxt_uregbase);
uctxt->subctxt_uregbase = NULL;
-bail:
+
return ret;
}
-static int user_init(struct file *fp)
+static void user_init(struct hfi1_ctxtdata *uctxt)
{
unsigned int rcvctrl_ops = 0;
- struct hfi1_filedata *fd = fp->private_data;
- struct hfi1_ctxtdata *uctxt = fd->uctxt;
-
- /* make sure that the context has already been setup */
- if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags))
- return -EFAULT;
/* initialize poll variables... */
uctxt->urgent = 0;
@@ -1160,20 +1180,12 @@ static int user_init(struct file *fp)
else
rcvctrl_ops |= HFI1_RCVCTRL_TAILUPD_DIS;
hfi1_rcvctrl(uctxt->dd, rcvctrl_ops, uctxt->ctxt);
-
- /* Notify any waiting slaves */
- if (uctxt->subctxt_cnt) {
- clear_bit(HFI1_CTXT_MASTER_UNINIT, &uctxt->event_flags);
- wake_up(&uctxt->wait);
- }
-
- return 0;
}
-static int get_ctxt_info(struct file *fp, void __user *ubase, __u32 len)
+static int get_ctxt_info(struct hfi1_filedata *fd, void __user *ubase,
+ __u32 len)
{
struct hfi1_ctxt_info cinfo;
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
int ret = 0;
@@ -1211,75 +1223,71 @@ static int get_ctxt_info(struct file *fp, void __user *ubase, __u32 len)
return ret;
}
-static int setup_ctxt(struct file *fp)
+static int init_user_ctxt(struct hfi1_filedata *fd)
{
- struct hfi1_filedata *fd = fp->private_data;
+ struct hfi1_ctxtdata *uctxt = fd->uctxt;
+ int ret;
+
+ ret = hfi1_user_sdma_alloc_queues(uctxt, fd);
+ if (ret)
+ return ret;
+
+ ret = hfi1_user_exp_rcv_init(fd);
+
+ return ret;
+}
+
+static int setup_base_ctxt(struct hfi1_filedata *fd)
+{
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct hfi1_devdata *dd = uctxt->dd;
int ret = 0;
- /*
- * Context should be set up only once, including allocation and
- * programming of eager buffers. This is done if context sharing
- * is not requested or by the master process.
- */
- if (!uctxt->subctxt_cnt || !fd->subctxt) {
- ret = hfi1_init_ctxt(uctxt->sc);
- if (ret)
- goto done;
+ hfi1_init_ctxt(uctxt->sc);
- /* Now allocate the RcvHdr queue and eager buffers. */
- ret = hfi1_create_rcvhdrq(dd, uctxt);
- if (ret)
- goto done;
- ret = hfi1_setup_eagerbufs(uctxt);
- if (ret)
- goto done;
- if (uctxt->subctxt_cnt && !fd->subctxt) {
- ret = setup_subctxt(uctxt);
- if (ret)
- goto done;
- }
- } else {
- ret = wait_event_interruptible(uctxt->wait, !test_bit(
- HFI1_CTXT_MASTER_UNINIT,
- &uctxt->event_flags));
- if (ret)
- goto done;
- }
-
- ret = hfi1_user_sdma_alloc_queues(uctxt, fp);
+ /* Now allocate the RcvHdr queue and eager buffers. */
+ ret = hfi1_create_rcvhdrq(dd, uctxt);
if (ret)
- goto done;
- /*
- * Expected receive has to be setup for all processes (including
- * shared contexts). However, it has to be done after the master
- * context has been fully configured as it depends on the
- * eager/expected split of the RcvArray entries.
- * Setting it up here ensures that the subcontexts will be waiting
- * (due to the above wait_event_interruptible() until the master
- * is setup.
- */
- ret = hfi1_user_exp_rcv_init(fp);
- if (ret)
- goto done;
+ return ret;
- set_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags);
-done:
+ ret = hfi1_setup_eagerbufs(uctxt);
+ if (ret)
+ goto setup_failed;
+
+ /* If sub-contexts are enabled, do the appropriate setup */
+ if (uctxt->subctxt_cnt)
+ ret = setup_subctxt(uctxt);
+ if (ret)
+ goto setup_failed;
+
+ ret = hfi1_user_exp_rcv_grp_init(fd);
+ if (ret)
+ goto setup_failed;
+
+ ret = init_user_ctxt(fd);
+ if (ret)
+ goto setup_failed;
+
+ user_init(uctxt);
+
+ return 0;
+
+setup_failed:
+ hfi1_free_ctxtdata(dd, uctxt);
return ret;
}
-static int get_base_info(struct file *fp, void __user *ubase, __u32 len)
+static int get_base_info(struct hfi1_filedata *fd, void __user *ubase,
+ __u32 len)
{
struct hfi1_base_info binfo;
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct hfi1_devdata *dd = uctxt->dd;
ssize_t sz;
unsigned offset;
int ret = 0;
- trace_hfi1_uctxtdata(uctxt->dd, uctxt);
+ trace_hfi1_uctxtdata(uctxt->dd, uctxt, fd->subctxt);
memset(&binfo, 0, sizeof(binfo));
binfo.hw_version = dd->revision;
@@ -1443,7 +1451,7 @@ int hfi1_set_uevent_bits(struct hfi1_pportdata *ppd, const int evtbit)
* overflow conditions. start_stop==1 re-enables, to be used to
* re-init the software copy of the head register
*/
-static int manage_rcvq(struct hfi1_ctxtdata *uctxt, unsigned subctxt,
+static int manage_rcvq(struct hfi1_ctxtdata *uctxt, u16 subctxt,
int start_stop)
{
struct hfi1_devdata *dd = uctxt->dd;
@@ -1478,7 +1486,7 @@ static int manage_rcvq(struct hfi1_ctxtdata *uctxt, unsigned subctxt,
* User process then performs actions appropriate to bit having been
* set, if desired, and checks again in future.
*/
-static int user_event_ack(struct hfi1_ctxtdata *uctxt, int subctxt,
+static int user_event_ack(struct hfi1_ctxtdata *uctxt, u16 subctxt,
unsigned long events)
{
int i;
@@ -1499,8 +1507,7 @@ static int user_event_ack(struct hfi1_ctxtdata *uctxt, int subctxt,
return 0;
}
-static int set_ctxt_pkey(struct hfi1_ctxtdata *uctxt, unsigned subctxt,
- u16 pkey)
+static int set_ctxt_pkey(struct hfi1_ctxtdata *uctxt, u16 subctxt, u16 pkey)
{
int ret = -ENOENT, i, intable = 0;
struct hfi1_pportdata *ppd = uctxt->ppd;
diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h
index f066743..da322e6 100644
--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -196,12 +196,6 @@ struct hfi1_ctxtdata {
void *rcvhdrq;
/* kernel virtual address where hdrqtail is updated */
volatile __le64 *rcvhdrtail_kvaddr;
- /*
- * Shared page for kernel to signal user processes that send buffers
- * need disarming. The process should call HFI1_CMD_DISARM_BUFS
- * or HFI1_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set.
- */
- unsigned long *user_event_mask;
/* when waiting for rcv or pioavail */
wait_queue_head_t wait;
/* rcvhdrq size (for freeing) */
@@ -224,13 +218,12 @@ struct hfi1_ctxtdata {
* (ignoring forks, dup, etc. for now)
*/
int cnt;
- /*
- * how much space to leave at start of eager TID entries for
- * protocol use, on each TID
- */
- /* instead of calculating it */
+ /* Device context index */
unsigned ctxt;
- /* non-zero if ctxt is being shared. */
+ /*
+ * non-zero if ctxt can be shared, and defines the maximum number of
+ * sub-contexts for this device context.
+ */
u16 subctxt_cnt;
/* non-zero if ctxt is being shared. */
u16 subctxt_id;
@@ -288,10 +281,10 @@ struct hfi1_ctxtdata {
void *subctxt_rcvegrbuf;
/* An array of pages for the eager header queue entries * N */
void *subctxt_rcvhdr_base;
+ /* Bitmask of in use context(s) */
+ DECLARE_BITMAP(in_use_ctxts, HFI1_MAX_SHARED_CTXTS);
/* The version of the library which opened this ctxt */
u32 userversion;
- /* Bitmask of active slaves */
- u32 active_slaves;
/* Type of packets or conditions we want to poll for */
u16 poll_type;
/* receive packet sequence counter */
@@ -1238,10 +1231,11 @@ struct mmu_rb_handler;
/* Private data for file operations */
struct hfi1_filedata {
+ struct hfi1_devdata *dd;
struct hfi1_ctxtdata *uctxt;
- unsigned subctxt;
struct hfi1_user_sdma_comp_q *cq;
struct hfi1_user_sdma_pkt_q *pq;
+ u16 subctxt;
/* for cpu affinity; -1 if none */
int rec_cpu_num;
u32 tid_n_pinned;
@@ -1263,27 +1257,27 @@ struct hfi1_devdata *hfi1_lookup(int unit);
extern u32 hfi1_cpulist_count;
extern unsigned long *hfi1_cpulist;
-int hfi1_init(struct hfi1_devdata *, int);
-int hfi1_count_units(int *npresentp, int *nupp);
+int hfi1_init(struct hfi1_devdata *dd, int reinit);
int hfi1_count_active_units(void);
-int hfi1_diag_add(struct hfi1_devdata *);
-void hfi1_diag_remove(struct hfi1_devdata *);
+int hfi1_diag_add(struct hfi1_devdata *dd);
+void hfi1_diag_remove(struct hfi1_devdata *dd);
void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup);
void handle_user_interrupt(struct hfi1_ctxtdata *rcd);
-int hfi1_create_rcvhdrq(struct hfi1_devdata *, struct hfi1_ctxtdata *);
-int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *);
+int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd);
+int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd);
int hfi1_create_ctxts(struct hfi1_devdata *dd);
-struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *, u32, int);
-void hfi1_init_pportdata(struct pci_dev *, struct hfi1_pportdata *,
- struct hfi1_devdata *, u8, u8);
-void hfi1_free_ctxtdata(struct hfi1_devdata *, struct hfi1_ctxtdata *);
+struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, u32 ctxt,
+ int numa);
+void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
+ struct hfi1_devdata *dd, u8 hw_pidx, u8 port);
+void hfi1_free_ctxtdata(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd);
-int handle_receive_interrupt(struct hfi1_ctxtdata *, int);
-int handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *, int);
-int handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata *, int);
+int handle_receive_interrupt(struct hfi1_ctxtdata *rcd, int thread);
+int handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *rcd, int thread);
+int handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata *rcd, int thread);
void set_all_slowpath(struct hfi1_devdata *dd);
void hfi1_vnic_synchronize_irq(struct hfi1_devdata *dd);
void hfi1_set_vnic_msix_info(struct hfi1_ctxtdata *rcd);
@@ -1580,7 +1574,7 @@ static inline int rcv_pkey_check(struct hfi1_pportdata *ppd, u16 pkey,
u32 lrh_max_header_bytes(struct hfi1_devdata *dd);
int mtu_to_enum(u32 mtu, int default_if_bad);
-u16 enum_to_mtu(int);
+u16 enum_to_mtu(int mtu);
static inline int valid_ib_mtu(unsigned int mtu)
{
return mtu == 256 || mtu == 512 ||
@@ -1594,15 +1588,15 @@ static inline int valid_opa_max_mtu(unsigned int mtu)
(valid_ib_mtu(mtu) || mtu == 8192 || mtu == 10240);
}
-int set_mtu(struct hfi1_pportdata *);
+int set_mtu(struct hfi1_pportdata *ppd);
-int hfi1_set_lid(struct hfi1_pportdata *, u32, u8);
-void hfi1_disable_after_error(struct hfi1_devdata *);
-int hfi1_set_uevent_bits(struct hfi1_pportdata *, const int);
-int hfi1_rcvbuf_validate(u32, u8, u16 *);
+int hfi1_set_lid(struct hfi1_pportdata *ppd, u32 lid, u8 lmc);
+void hfi1_disable_after_error(struct hfi1_devdata *dd);
+int hfi1_set_uevent_bits(struct hfi1_pportdata *ppd, const int evtbit);
+int hfi1_rcvbuf_validate(u32 size, u8 type, u16 *encode);
-int fm_get_table(struct hfi1_pportdata *, int, void *);
-int fm_set_table(struct hfi1_pportdata *, int, void *);
+int fm_get_table(struct hfi1_pportdata *ppd, int which, void *t);
+int fm_set_table(struct hfi1_pportdata *ppd, int which, void *t);
void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf);
void reset_link_credits(struct hfi1_devdata *dd);
@@ -1724,19 +1718,19 @@ struct cc_state *get_cc_state_protected(struct hfi1_pportdata *ppd)
#define HFI1_PBC_LENGTH_MASK ((1 << 11) - 1)
/* ctxt_flag bit offsets */
- /* context has been setup */
-#define HFI1_CTXT_SETUP_DONE 1
+ /* base context has not finished initializing */
+#define HFI1_CTXT_BASE_UNINIT 1
+ /* base context initaliation failed */
+#define HFI1_CTXT_BASE_FAILED 2
/* waiting for a packet to arrive */
-#define HFI1_CTXT_WAITING_RCV 2
- /* master has not finished initializing */
-#define HFI1_CTXT_MASTER_UNINIT 4
+#define HFI1_CTXT_WAITING_RCV 3
/* waiting for an urgent packet to arrive */
-#define HFI1_CTXT_WAITING_URG 5
+#define HFI1_CTXT_WAITING_URG 4
/* free up any allocated data at closes */
-struct hfi1_devdata *hfi1_init_dd(struct pci_dev *,
- const struct pci_device_id *);
-void hfi1_free_devdata(struct hfi1_devdata *);
+struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+void hfi1_free_devdata(struct hfi1_devdata *dd);
struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra);
/* LED beaconing functions */
@@ -1811,24 +1805,24 @@ static inline u32 get_rcvhdrtail(const struct hfi1_ctxtdata *rcd)
extern const char ib_hfi1_version[];
-int hfi1_device_create(struct hfi1_devdata *);
-void hfi1_device_remove(struct hfi1_devdata *);
+int hfi1_device_create(struct hfi1_devdata *dd);
+void hfi1_device_remove(struct hfi1_devdata *dd);
int hfi1_create_port_files(struct ib_device *ibdev, u8 port_num,
struct kobject *kobj);
-int hfi1_verbs_register_sysfs(struct hfi1_devdata *);
-void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *);
+int hfi1_verbs_register_sysfs(struct hfi1_devdata *dd);
+void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *dd);
/* Hook for sysfs read of QSFP */
int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len);
-int hfi1_pcie_init(struct pci_dev *, const struct pci_device_id *);
-void hfi1_pcie_cleanup(struct pci_dev *);
-int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *);
+int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent);
+void hfi1_pcie_cleanup(struct pci_dev *pdev);
+int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev);
void hfi1_pcie_ddcleanup(struct hfi1_devdata *);
-void hfi1_pcie_flr(struct hfi1_devdata *);
-int pcie_speeds(struct hfi1_devdata *);
-void request_msix(struct hfi1_devdata *, u32 *, struct hfi1_msix_entry *);
-void hfi1_enable_intx(struct pci_dev *);
+int pcie_speeds(struct hfi1_devdata *dd);
+void request_msix(struct hfi1_devdata *dd, u32 *nent,
+ struct hfi1_msix_entry *entry);
+void hfi1_enable_intx(struct pci_dev *pdev);
void restore_pci_variables(struct hfi1_devdata *dd);
int do_pcie_gen3_transition(struct hfi1_devdata *dd);
int parse_platform_config(struct hfi1_devdata *dd);
diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c
index 4d6b9f8..4a11d4d 100644
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -53,6 +53,7 @@
#include <linux/module.h>
#include <linux/printk.h>
#include <linux/hrtimer.h>
+#include <linux/bitmap.h>
#include <rdma/rdma_vt.h>
#include "hfi.h"
@@ -70,6 +71,7 @@
#undef pr_fmt
#define pr_fmt(fmt) DRIVER_NAME ": " fmt
+#define HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES 5
/*
* min buffers we want to have per context, after driver
*/
@@ -101,9 +103,9 @@ static unsigned hfi1_rcvarr_split = 25;
module_param_named(rcvarr_split, hfi1_rcvarr_split, uint, S_IRUGO);
MODULE_PARM_DESC(rcvarr_split, "Percent of context's RcvArray entries used for Eager buffers");
-static uint eager_buffer_size = (2 << 20); /* 2MB */
+static uint eager_buffer_size = (8 << 20); /* 8MB */
module_param(eager_buffer_size, uint, S_IRUGO);
-MODULE_PARM_DESC(eager_buffer_size, "Size of the eager buffers, default: 2MB");
+MODULE_PARM_DESC(eager_buffer_size, "Size of the eager buffers, default: 8MB");
static uint rcvhdrcnt = 2048; /* 2x the max eager buffer count */
module_param_named(rcvhdrcnt, rcvhdrcnt, uint, S_IRUGO);
@@ -117,7 +119,7 @@ unsigned int user_credit_return_threshold = 33; /* default is 33% */
module_param(user_credit_return_threshold, uint, S_IRUGO);
MODULE_PARM_DESC(user_credit_return_threshold, "Credit return threshold for user send contexts, return when unreturned credits passes this many blocks (in percent of allocated blocks, 0 is off)");
-static inline u64 encode_rcv_header_entry_size(u16);
+static inline u64 encode_rcv_header_entry_size(u16 size);
static struct idr hfi1_unit_table;
u32 hfi1_cpulist_count;
@@ -175,13 +177,7 @@ int hfi1_create_ctxts(struct hfi1_devdata *dd)
goto nomem;
}
- ret = hfi1_init_ctxt(rcd->sc);
- if (ret < 0) {
- dd_dev_err(dd,
- "Failed to setup kernel receive context, failing\n");
- ret = -EFAULT;
- goto bail;
- }
+ hfi1_init_ctxt(rcd->sc);
}
/*
@@ -193,7 +189,7 @@ int hfi1_create_ctxts(struct hfi1_devdata *dd)
return 0;
nomem:
ret = -ENOMEM;
-bail:
+
if (dd->rcd) {
for (i = 0; i < dd->num_rcv_contexts; ++i)
hfi1_free_ctxtdata(dd, dd->rcd[i]);
@@ -227,7 +223,7 @@ struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, u32 ctxt,
INIT_LIST_HEAD(&rcd->qp_wait_list);
rcd->ppd = ppd;
rcd->dd = dd;
- rcd->cnt = 1;
+ __set_bit(0, rcd->in_use_ctxts);
rcd->ctxt = ctxt;
dd->rcd[ctxt] = rcd;
rcd->numa_id = numa;
@@ -623,7 +619,7 @@ static int create_workqueues(struct hfi1_devdata *dd)
alloc_workqueue(
"hfi%d_%d",
WQ_SYSFS | WQ_HIGHPRI | WQ_CPU_INTENSIVE,
- dd->num_sdma,
+ HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES,
dd->unit, pidx);
if (!ppd->hfi1_wq)
goto wq_error;
@@ -968,7 +964,6 @@ void hfi1_free_ctxtdata(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd)
kfree(rcd->egrbufs.buffers);
sc_free(rcd->sc);
- vfree(rcd->user_event_mask);
vfree(rcd->subctxt_uregbase);
vfree(rcd->subctxt_rcvegrbuf);
vfree(rcd->subctxt_rcvhdr_base);
@@ -1687,8 +1682,6 @@ int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd)
dd_dev_err(dd,
"attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n",
rcd->ctxt);
- vfree(rcd->user_event_mask);
- rcd->user_event_mask = NULL;
dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq,
rcd->rcvhdrq_dma);
rcd->rcvhdrq = NULL;
@@ -1777,6 +1770,7 @@ int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd)
!HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR)) {
dd_dev_err(dd, "ctxt%u: Failed to allocate eager buffers\n",
rcd->ctxt);
+ ret = -ENOMEM;
goto bail_rcvegrbuf_phys;
}
@@ -1854,7 +1848,7 @@ int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd)
"ctxt%u: current Eager buffer size is invalid %u\n",
rcd->ctxt, rcd->egrbufs.rcvtid_size);
ret = -EINVAL;
- goto bail;
+ goto bail_rcvegrbuf_phys;
}
for (idx = 0; idx < rcd->egrbufs.alloced; idx++) {
@@ -1862,7 +1856,8 @@ int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd)
rcd->egrbufs.rcvtids[idx].dma, order);
cond_resched();
}
- goto bail;
+
+ return 0;
bail_rcvegrbuf_phys:
for (idx = 0; idx < rcd->egrbufs.alloced &&
@@ -1876,6 +1871,6 @@ int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd)
rcd->egrbufs.buffers[idx].dma = 0;
rcd->egrbufs.buffers[idx].len = 0;
}
-bail:
+
return ret;
}
diff --git a/drivers/infiniband/hw/hfi1/intr.c b/drivers/infiniband/hw/hfi1/intr.c
index 232014d..ba265d0 100644
--- a/drivers/infiniband/hw/hfi1/intr.c
+++ b/drivers/infiniband/hw/hfi1/intr.c
@@ -47,6 +47,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/bitmap.h>
#include "hfi.h"
#include "common.h"
@@ -189,7 +190,7 @@ void handle_user_interrupt(struct hfi1_ctxtdata *rcd)
unsigned long flags;
spin_lock_irqsave(&dd->uctxt_lock, flags);
- if (!rcd->cnt)
+ if (bitmap_empty(rcd->in_use_ctxts, HFI1_MAX_SHARED_CTXTS))
goto done;
if (test_and_clear_bit(HFI1_CTXT_WAITING_RCV, &rcd->event_flags)) {
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index e39e01b..93faf86 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -240,36 +240,6 @@ void hfi1_pcie_ddcleanup(struct hfi1_devdata *dd)
iounmap(dd->piobase);
}
-/*
- * Do a Function Level Reset (FLR) on the device.
- * Based on static function drivers/pci/pci.c:pcie_flr().
- */
-void hfi1_pcie_flr(struct hfi1_devdata *dd)
-{
- int i;
- u16 status;
-
- /* no need to check for the capability - we know the device has it */
-
- /* wait for Transaction Pending bit to clear, at most a few ms */
- for (i = 0; i < 4; i++) {
- if (i)
- msleep((1 << (i - 1)) * 100);
-
- pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVSTA, &status);
- if (!(status & PCI_EXP_DEVSTA_TRPND))
- goto clear;
- }
-
- dd_dev_err(dd, "Transaction Pending bit is not clearing, proceeding with reset anyway\n");
-
-clear:
- pcie_capability_set_word(dd->pcidev, PCI_EXP_DEVCTL,
- PCI_EXP_DEVCTL_BCR_FLR);
- /* PCIe spec requires the function to be back within 100ms */
- msleep(100);
-}
-
static void msix_setup(struct hfi1_devdata *dd, int pos, u32 *msixcnt,
struct hfi1_msix_entry *hfi1_msix_entry)
{
diff --git a/drivers/infiniband/hw/hfi1/qp.c b/drivers/infiniband/hw/hfi1/qp.c
index 4573e4c..650305c 100644
--- a/drivers/infiniband/hw/hfi1/qp.c
+++ b/drivers/infiniband/hw/hfi1/qp.c
@@ -731,9 +731,7 @@ void quiesce_qp(struct rvt_qp *qp)
void notify_qp_reset(struct rvt_qp *qp)
{
- struct hfi1_qp_priv *priv = qp->priv;
-
- priv->r_adefered = 0;
+ qp->r_adefered = 0;
clear_ahg(qp);
}
diff --git a/drivers/infiniband/hw/hfi1/rc.c b/drivers/infiniband/hw/hfi1/rc.c
index 75a729c..069bdaf 100644
--- a/drivers/infiniband/hw/hfi1/rc.c
+++ b/drivers/infiniband/hw/hfi1/rc.c
@@ -727,10 +727,9 @@ void hfi1_send_rc_ack(struct hfi1_ctxtdata *rcd, struct rvt_qp *qp,
struct ib_header hdr;
struct ib_other_headers *ohdr;
unsigned long flags;
- struct hfi1_qp_priv *priv = qp->priv;
/* clear the defer count */
- priv->r_adefered = 0;
+ qp->r_adefered = 0;
/* Don't send ACK or NAK if a RDMA read or atomic is pending. */
if (qp->s_flags & RVT_S_RESP_PENDING)
@@ -1604,9 +1603,7 @@ static inline void rc_defered_ack(struct hfi1_ctxtdata *rcd,
static inline void rc_cancel_ack(struct rvt_qp *qp)
{
- struct hfi1_qp_priv *priv = qp->priv;
-
- priv->r_adefered = 0;
+ qp->r_adefered = 0;
if (list_empty(&qp->rspwait))
return;
list_del_init(&qp->rspwait);
@@ -2314,13 +2311,11 @@ void hfi1_rc_rcv(struct hfi1_packet *packet)
qp->r_nak_state = 0;
/* Send an ACK if requested or required. */
if (psn & IB_BTH_REQ_ACK) {
- struct hfi1_qp_priv *priv = qp->priv;
-
if (packet->numpkt == 0) {
rc_cancel_ack(qp);
goto send_ack;
}
- if (priv->r_adefered >= HFI1_PSN_CREDIT) {
+ if (qp->r_adefered >= HFI1_PSN_CREDIT) {
rc_cancel_ack(qp);
goto send_ack;
}
@@ -2328,7 +2323,7 @@ void hfi1_rc_rcv(struct hfi1_packet *packet)
rc_cancel_ack(qp);
goto send_ack;
}
- priv->r_adefered++;
+ qp->r_adefered++;
rc_defered_ack(rcd, qp);
}
return;
diff --git a/drivers/infiniband/hw/hfi1/ruc.c b/drivers/infiniband/hw/hfi1/ruc.c
index 891ba0a..3a17dab 100644
--- a/drivers/infiniband/hw/hfi1/ruc.c
+++ b/drivers/infiniband/hw/hfi1/ruc.c
@@ -800,6 +800,43 @@ void hfi1_make_ruc_header(struct rvt_qp *qp, struct ib_other_headers *ohdr,
/* when sending, force a reschedule every one of these periods */
#define SEND_RESCHED_TIMEOUT (5 * HZ) /* 5s in jiffies */
+/**
+ * schedule_send_yield - test for a yield required for QP send engine
+ * @timeout: Final time for timeout slice for jiffies
+ * @qp: a pointer to QP
+ * @ps: a pointer to a structure with commonly lookup values for
+ * the the send engine progress
+ *
+ * This routine checks if the time slice for the QP has expired
+ * for RC QPs, if so an additional work entry is queued. At this
+ * point, other QPs have an opportunity to be scheduled. It
+ * returns true if a yield is required, otherwise, false
+ * is returned.
+ */
+static bool schedule_send_yield(struct rvt_qp *qp,
+ struct hfi1_pkt_state *ps)
+{
+ if (unlikely(time_after(jiffies, ps->timeout))) {
+ if (!ps->in_thread ||
+ workqueue_congested(ps->cpu, ps->ppd->hfi1_wq)) {
+ spin_lock_irqsave(&qp->s_lock, ps->flags);
+ qp->s_flags &= ~RVT_S_BUSY;
+ hfi1_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, ps->flags);
+ this_cpu_inc(*ps->ppd->dd->send_schedule);
+ trace_hfi1_rc_expired_time_slice(qp, true);
+ return true;
+ }
+
+ cond_resched();
+ this_cpu_inc(*ps->ppd->dd->send_schedule);
+ ps->timeout = jiffies + ps->timeout_int;
+ }
+
+ trace_hfi1_rc_expired_time_slice(qp, false);
+ return false;
+}
+
void hfi1_do_send_from_rvt(struct rvt_qp *qp)
{
hfi1_do_send(qp, false);
@@ -827,13 +864,13 @@ void hfi1_do_send(struct rvt_qp *qp, bool in_thread)
struct hfi1_pkt_state ps;
struct hfi1_qp_priv *priv = qp->priv;
int (*make_req)(struct rvt_qp *qp, struct hfi1_pkt_state *ps);
- unsigned long timeout;
- unsigned long timeout_int;
- int cpu;
ps.dev = to_idev(qp->ibqp.device);
ps.ibp = to_iport(qp->ibqp.device, qp->port_num);
ps.ppd = ppd_from_ibp(ps.ibp);
+ ps.in_thread = in_thread;
+
+ trace_hfi1_rc_do_send(qp, in_thread);
switch (qp->ibqp.qp_type) {
case IB_QPT_RC:
@@ -844,7 +881,7 @@ void hfi1_do_send(struct rvt_qp *qp, bool in_thread)
return;
}
make_req = hfi1_make_rc_req;
- timeout_int = (qp->timeout_jiffies);
+ ps.timeout_int = qp->timeout_jiffies;
break;
case IB_QPT_UC:
if (!loopback && ((rdma_ah_get_dlid(&qp->remote_ah_attr) &
@@ -854,11 +891,11 @@ void hfi1_do_send(struct rvt_qp *qp, bool in_thread)
return;
}
make_req = hfi1_make_uc_req;
- timeout_int = SEND_RESCHED_TIMEOUT;
+ ps.timeout_int = SEND_RESCHED_TIMEOUT;
break;
default:
make_req = hfi1_make_ud_req;
- timeout_int = SEND_RESCHED_TIMEOUT;
+ ps.timeout_int = SEND_RESCHED_TIMEOUT;
}
spin_lock_irqsave(&qp->s_lock, ps.flags);
@@ -871,9 +908,11 @@ void hfi1_do_send(struct rvt_qp *qp, bool in_thread)
qp->s_flags |= RVT_S_BUSY;
- timeout = jiffies + (timeout_int) / 8;
- cpu = priv->s_sde ? priv->s_sde->cpu :
+ ps.timeout_int = ps.timeout_int / 8;
+ ps.timeout = jiffies + ps.timeout_int;
+ ps.cpu = priv->s_sde ? priv->s_sde->cpu :
cpumask_first(cpumask_of_node(ps.ppd->dd->node));
+
/* insure a pre-built packet is handled */
ps.s_txreq = get_waiting_verbs_txreq(qp);
do {
@@ -889,28 +928,9 @@ void hfi1_do_send(struct rvt_qp *qp, bool in_thread)
/* Record that s_ahg is empty. */
qp->s_hdrwords = 0;
/* allow other tasks to run */
- if (unlikely(time_after(jiffies, timeout))) {
- if (!in_thread ||
- workqueue_congested(
- cpu,
- ps.ppd->hfi1_wq)) {
- spin_lock_irqsave(
- &qp->s_lock,
- ps.flags);
- qp->s_flags &= ~RVT_S_BUSY;
- hfi1_schedule_send(qp);
- spin_unlock_irqrestore(
- &qp->s_lock,
- ps.flags);
- this_cpu_inc(
- *ps.ppd->dd->send_schedule);
- return;
- }
- cond_resched();
- this_cpu_inc(
- *ps.ppd->dd->send_schedule);
- timeout = jiffies + (timeout_int) / 8;
- }
+ if (schedule_send_yield(qp, &ps))
+ return;
+
spin_lock_irqsave(&qp->s_lock, ps.flags);
}
} while (make_req(qp, &ps));
diff --git a/drivers/infiniband/hw/hfi1/trace_ctxts.h b/drivers/infiniband/hw/hfi1/trace_ctxts.h
index 26ae789..4eb4cc7 100644
--- a/drivers/infiniband/hw/hfi1/trace_ctxts.h
+++ b/drivers/infiniband/hw/hfi1/trace_ctxts.h
@@ -57,12 +57,14 @@
#define UCTXT_FMT \
"cred:%u, credaddr:0x%llx, piobase:0x%p, rcvhdr_cnt:%u, " \
- "rcvbase:0x%llx, rcvegrc:%u, rcvegrb:0x%llx"
+ "rcvbase:0x%llx, rcvegrc:%u, rcvegrb:0x%llx, subctxt_cnt:%u"
TRACE_EVENT(hfi1_uctxtdata,
- TP_PROTO(struct hfi1_devdata *dd, struct hfi1_ctxtdata *uctxt),
- TP_ARGS(dd, uctxt),
+ TP_PROTO(struct hfi1_devdata *dd, struct hfi1_ctxtdata *uctxt,
+ unsigned int subctxt),
+ TP_ARGS(dd, uctxt, subctxt),
TP_STRUCT__entry(DD_DEV_ENTRY(dd)
__field(unsigned int, ctxt)
+ __field(unsigned int, subctxt)
__field(u32, credits)
__field(u64, hw_free)
__field(void __iomem *, piobase)
@@ -70,9 +72,11 @@ TRACE_EVENT(hfi1_uctxtdata,
__field(u64, rcvhdrq_dma)
__field(u32, eager_cnt)
__field(u64, rcvegr_dma)
+ __field(unsigned int, subctxt_cnt)
),
TP_fast_assign(DD_DEV_ASSIGN(dd);
__entry->ctxt = uctxt->ctxt;
+ __entry->subctxt = subctxt;
__entry->credits = uctxt->sc->credits;
__entry->hw_free = le64_to_cpu(*uctxt->sc->hw_free);
__entry->piobase = uctxt->sc->base_addr;
@@ -80,17 +84,20 @@ TRACE_EVENT(hfi1_uctxtdata,
__entry->rcvhdrq_dma = uctxt->rcvhdrq_dma;
__entry->eager_cnt = uctxt->egrbufs.alloced;
__entry->rcvegr_dma = uctxt->egrbufs.rcvtids[0].dma;
+ __entry->subctxt_cnt = uctxt->subctxt_cnt;
),
- TP_printk("[%s] ctxt %u " UCTXT_FMT,
+ TP_printk("[%s] ctxt %u:%u " UCTXT_FMT,
__get_str(dev),
__entry->ctxt,
+ __entry->subctxt,
__entry->credits,
__entry->hw_free,
__entry->piobase,
__entry->rcvhdrq_cnt,
__entry->rcvhdrq_dma,
__entry->eager_cnt,
- __entry->rcvegr_dma
+ __entry->rcvegr_dma,
+ __entry->subctxt_cnt
)
);
diff --git a/drivers/infiniband/hw/hfi1/trace_tx.h b/drivers/infiniband/hw/hfi1/trace_tx.h
index 2c9ac57..c59809a 100644
--- a/drivers/infiniband/hw/hfi1/trace_tx.h
+++ b/drivers/infiniband/hw/hfi1/trace_tx.h
@@ -676,6 +676,40 @@ TRACE_EVENT(
)
);
+DECLARE_EVENT_CLASS(
+ hfi1_do_send_template,
+ TP_PROTO(struct rvt_qp *qp, bool flag),
+ TP_ARGS(qp, flag),
+ TP_STRUCT__entry(
+ DD_DEV_ENTRY(dd_from_ibdev(qp->ibqp.device))
+ __field(u32, qpn)
+ __field(bool, flag)
+ ),
+ TP_fast_assign(
+ DD_DEV_ASSIGN(dd_from_ibdev(qp->ibqp.device))
+ __entry->qpn = qp->ibqp.qp_num;
+ __entry->flag = flag;
+ ),
+ TP_printk(
+ "[%s] qpn %x flag %d",
+ __get_str(dev),
+ __entry->qpn,
+ __entry->flag
+ )
+);
+
+DEFINE_EVENT(
+ hfi1_do_send_template, hfi1_rc_do_send,
+ TP_PROTO(struct rvt_qp *qp, bool flag),
+ TP_ARGS(qp, flag)
+);
+
+DEFINE_EVENT(
+ hfi1_do_send_template, hfi1_rc_expired_time_slice,
+ TP_PROTO(struct rvt_qp *qp, bool flag),
+ TP_ARGS(qp, flag)
+);
+
#endif /* __HFI1_TRACE_TX_H */
#undef TRACE_INCLUDE_PATH
diff --git a/drivers/infiniband/hw/hfi1/user_exp_rcv.c b/drivers/infiniband/hw/hfi1/user_exp_rcv.c
index 35c6e7e..a8f0aa4 100644
--- a/drivers/infiniband/hw/hfi1/user_exp_rcv.c
+++ b/drivers/infiniband/hw/hfi1/user_exp_rcv.c
@@ -53,7 +53,7 @@
struct tid_group {
struct list_head list;
- unsigned base;
+ u32 base;
u8 size;
u8 used;
u8 map;
@@ -82,20 +82,25 @@ struct tid_pageset {
(unsigned long)(len) - 1) & PAGE_MASK) - \
((unsigned long)vaddr & PAGE_MASK)) >> PAGE_SHIFT))
-static void unlock_exp_tids(struct hfi1_ctxtdata *, struct exp_tid_set *,
- struct hfi1_filedata *);
-static u32 find_phys_blocks(struct page **, unsigned, struct tid_pageset *);
-static int set_rcvarray_entry(struct file *, unsigned long, u32,
- struct tid_group *, struct page **, unsigned);
-static int tid_rb_insert(void *, struct mmu_rb_node *);
+static void unlock_exp_tids(struct hfi1_ctxtdata *uctxt,
+ struct exp_tid_set *set,
+ struct hfi1_filedata *fd);
+static u32 find_phys_blocks(struct page **pages, unsigned npages,
+ struct tid_pageset *list);
+static int set_rcvarray_entry(struct hfi1_filedata *fd, unsigned long vaddr,
+ u32 rcventry, struct tid_group *grp,
+ struct page **pages, unsigned npages);
+static int tid_rb_insert(void *arg, struct mmu_rb_node *node);
static void cacheless_tid_rb_remove(struct hfi1_filedata *fdata,
struct tid_rb_node *tnode);
-static void tid_rb_remove(void *, struct mmu_rb_node *);
-static int tid_rb_invalidate(void *, struct mmu_rb_node *);
-static int program_rcvarray(struct file *, unsigned long, struct tid_group *,
- struct tid_pageset *, unsigned, u16, struct page **,
- u32 *, unsigned *, unsigned *);
-static int unprogram_rcvarray(struct file *, u32, struct tid_group **);
+static void tid_rb_remove(void *arg, struct mmu_rb_node *node);
+static int tid_rb_invalidate(void *arg, struct mmu_rb_node *mnode);
+static int program_rcvarray(struct hfi1_filedata *fd, unsigned long vaddr,
+ struct tid_group *grp, struct tid_pageset *sets,
+ unsigned start, u16 count, struct page **pages,
+ u32 *tidlist, unsigned *tididx, unsigned *pmapped);
+static int unprogram_rcvarray(struct hfi1_filedata *fd, u32 tidinfo,
+ struct tid_group **grp);
static void clear_tid_node(struct hfi1_filedata *fd, struct tid_rb_node *node);
static struct mmu_rb_ops tid_rb_ops = {
@@ -149,52 +154,60 @@ static inline void tid_group_move(struct tid_group *group,
tid_group_add_tail(group, s2);
}
+int hfi1_user_exp_rcv_grp_init(struct hfi1_filedata *fd)
+{
+ struct hfi1_ctxtdata *uctxt = fd->uctxt;
+ struct hfi1_devdata *dd = fd->dd;
+ u32 tidbase;
+ u32 i;
+ struct tid_group *grp, *gptr;
+
+ exp_tid_group_init(&uctxt->tid_group_list);
+ exp_tid_group_init(&uctxt->tid_used_list);
+ exp_tid_group_init(&uctxt->tid_full_list);
+
+ tidbase = uctxt->expected_base;
+ for (i = 0; i < uctxt->expected_count /
+ dd->rcv_entries.group_size; i++) {
+ grp = kzalloc(sizeof(*grp), GFP_KERNEL);
+ if (!grp)
+ goto grp_failed;
+
+ grp->size = dd->rcv_entries.group_size;
+ grp->base = tidbase;
+ tid_group_add_tail(grp, &uctxt->tid_group_list);
+ tidbase += dd->rcv_entries.group_size;
+ }
+
+ return 0;
+
+grp_failed:
+ list_for_each_entry_safe(grp, gptr, &uctxt->tid_group_list.list,
+ list) {
+ list_del_init(&grp->list);
+ kfree(grp);
+ }
+
+ return -ENOMEM;
+}
+
/*
* Initialize context and file private data needed for Expected
* receive caching. This needs to be done after the context has
* been configured with the eager/expected RcvEntry counts.
*/
-int hfi1_user_exp_rcv_init(struct file *fp)
+int hfi1_user_exp_rcv_init(struct hfi1_filedata *fd)
{
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct hfi1_devdata *dd = uctxt->dd;
- unsigned tidbase;
- int i, ret = 0;
+ int ret = 0;
spin_lock_init(&fd->tid_lock);
spin_lock_init(&fd->invalid_lock);
- if (!uctxt->subctxt_cnt || !fd->subctxt) {
- exp_tid_group_init(&uctxt->tid_group_list);
- exp_tid_group_init(&uctxt->tid_used_list);
- exp_tid_group_init(&uctxt->tid_full_list);
-
- tidbase = uctxt->expected_base;
- for (i = 0; i < uctxt->expected_count /
- dd->rcv_entries.group_size; i++) {
- struct tid_group *grp;
-
- grp = kzalloc(sizeof(*grp), GFP_KERNEL);
- if (!grp) {
- /*
- * If we fail here, the groups already
- * allocated will be freed by the close
- * call.
- */
- ret = -ENOMEM;
- goto done;
- }
- grp->size = dd->rcv_entries.group_size;
- grp->base = tidbase;
- tid_group_add_tail(grp, &uctxt->tid_group_list);
- tidbase += dd->rcv_entries.group_size;
- }
- }
-
fd->entry_to_rb = kcalloc(uctxt->expected_count,
- sizeof(struct rb_node *),
- GFP_KERNEL);
+ sizeof(struct rb_node *),
+ GFP_KERNEL);
if (!fd->entry_to_rb)
return -ENOMEM;
@@ -204,8 +217,9 @@ int hfi1_user_exp_rcv_init(struct file *fp)
sizeof(*fd->invalid_tids),
GFP_KERNEL);
if (!fd->invalid_tids) {
- ret = -ENOMEM;
- goto done;
+ kfree(fd->entry_to_rb);
+ fd->entry_to_rb = NULL;
+ return -ENOMEM;
}
/*
@@ -248,41 +262,44 @@ int hfi1_user_exp_rcv_init(struct file *fp)
fd->tid_limit = uctxt->expected_count;
}
spin_unlock(&fd->tid_lock);
-done:
+
return ret;
}
-int hfi1_user_exp_rcv_free(struct hfi1_filedata *fd)
+void hfi1_user_exp_rcv_grp_free(struct hfi1_ctxtdata *uctxt)
{
- struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct tid_group *grp, *gptr;
- if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags))
- return 0;
+ list_for_each_entry_safe(grp, gptr, &uctxt->tid_group_list.list,
+ list) {
+ list_del_init(&grp->list);
+ kfree(grp);
+ }
+ hfi1_clear_tids(uctxt);
+}
+
+void hfi1_user_exp_rcv_free(struct hfi1_filedata *fd)
+{
+ struct hfi1_ctxtdata *uctxt = fd->uctxt;
+
/*
* The notifier would have been removed when the process'es mm
* was freed.
*/
- if (fd->handler)
+ if (fd->handler) {
hfi1_mmu_rb_unregister(fd->handler);
-
- kfree(fd->invalid_tids);
-
- if (!uctxt->cnt) {
+ } else {
if (!EXP_TID_SET_EMPTY(uctxt->tid_full_list))
unlock_exp_tids(uctxt, &uctxt->tid_full_list, fd);
if (!EXP_TID_SET_EMPTY(uctxt->tid_used_list))
unlock_exp_tids(uctxt, &uctxt->tid_used_list, fd);
- list_for_each_entry_safe(grp, gptr, &uctxt->tid_group_list.list,
- list) {
- list_del_init(&grp->list);
- kfree(grp);
- }
- hfi1_clear_tids(uctxt);
}
+ kfree(fd->invalid_tids);
+ fd->invalid_tids = NULL;
+
kfree(fd->entry_to_rb);
- return 0;
+ fd->entry_to_rb = NULL;
}
/*
@@ -351,10 +368,10 @@ static inline void rcv_array_wc_fill(struct hfi1_devdata *dd, u32 index)
* can fit into the group. If the group becomes fully
* used, move it to tid_full_list.
*/
-int hfi1_user_exp_rcv_setup(struct file *fp, struct hfi1_tid_info *tinfo)
+int hfi1_user_exp_rcv_setup(struct hfi1_filedata *fd,
+ struct hfi1_tid_info *tinfo)
{
int ret = 0, need_group = 0, pinned;
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct hfi1_devdata *dd = uctxt->dd;
unsigned npages, ngroups, pageidx = 0, pageset_count, npagesets,
@@ -451,7 +468,7 @@ int hfi1_user_exp_rcv_setup(struct file *fp, struct hfi1_tid_info *tinfo)
struct tid_group *grp =
tid_group_pop(&uctxt->tid_group_list);
- ret = program_rcvarray(fp, vaddr, grp, pagesets,
+ ret = program_rcvarray(fd, vaddr, grp, pagesets,
pageidx, dd->rcv_entries.group_size,
pages, tidlist, &tididx, &mapped);
/*
@@ -497,7 +514,7 @@ int hfi1_user_exp_rcv_setup(struct file *fp, struct hfi1_tid_info *tinfo)
unsigned use = min_t(unsigned, pageset_count - pageidx,
grp->size - grp->used);
- ret = program_rcvarray(fp, vaddr, grp, pagesets,
+ ret = program_rcvarray(fd, vaddr, grp, pagesets,
pageidx, use, pages, tidlist,
&tididx, &mapped);
if (ret < 0) {
@@ -547,7 +564,7 @@ int hfi1_user_exp_rcv_setup(struct file *fp, struct hfi1_tid_info *tinfo)
* everything done so far so we don't leak resources.
*/
tinfo->tidlist = (unsigned long)&tidlist;
- hfi1_user_exp_rcv_clear(fp, tinfo);
+ hfi1_user_exp_rcv_clear(fd, tinfo);
tinfo->tidlist = 0;
ret = -EFAULT;
goto bail;
@@ -571,10 +588,10 @@ int hfi1_user_exp_rcv_setup(struct file *fp, struct hfi1_tid_info *tinfo)
return ret > 0 ? 0 : ret;
}
-int hfi1_user_exp_rcv_clear(struct file *fp, struct hfi1_tid_info *tinfo)
+int hfi1_user_exp_rcv_clear(struct hfi1_filedata *fd,
+ struct hfi1_tid_info *tinfo)
{
int ret = 0;
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
u32 *tidinfo;
unsigned tididx;
@@ -589,7 +606,7 @@ int hfi1_user_exp_rcv_clear(struct file *fp, struct hfi1_tid_info *tinfo)
mutex_lock(&uctxt->exp_lock);
for (tididx = 0; tididx < tinfo->tidcnt; tididx++) {
- ret = unprogram_rcvarray(fp, tidinfo[tididx], NULL);
+ ret = unprogram_rcvarray(fd, tidinfo[tididx], NULL);
if (ret) {
hfi1_cdbg(TID, "Failed to unprogram rcv array %d",
ret);
@@ -606,9 +623,9 @@ int hfi1_user_exp_rcv_clear(struct file *fp, struct hfi1_tid_info *tinfo)
return ret;
}
-int hfi1_user_exp_rcv_invalid(struct file *fp, struct hfi1_tid_info *tinfo)
+int hfi1_user_exp_rcv_invalid(struct hfi1_filedata *fd,
+ struct hfi1_tid_info *tinfo)
{
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
unsigned long *ev = uctxt->dd->events +
(((uctxt->ctxt - uctxt->dd->first_dyn_alloc_ctxt) *
@@ -723,7 +740,7 @@ static u32 find_phys_blocks(struct page **pages, unsigned npages,
/**
* program_rcvarray() - program an RcvArray group with receive buffers
- * @fp: file pointer
+ * @fd: filedata pointer
* @vaddr: starting user virtual address
* @grp: RcvArray group
* @sets: array of struct tid_pageset holding information on physically
@@ -748,13 +765,12 @@ static u32 find_phys_blocks(struct page **pages, unsigned npages,
* -ENOMEM or -EFAULT on error from set_rcvarray_entry(), or
* number of RcvArray entries programmed.
*/
-static int program_rcvarray(struct file *fp, unsigned long vaddr,
+static int program_rcvarray(struct hfi1_filedata *fd, unsigned long vaddr,
struct tid_group *grp,
struct tid_pageset *sets,
unsigned start, u16 count, struct page **pages,
u32 *tidlist, unsigned *tididx, unsigned *pmapped)
{
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct hfi1_devdata *dd = uctxt->dd;
u16 idx;
@@ -795,7 +811,7 @@ static int program_rcvarray(struct file *fp, unsigned long vaddr,
npages = sets[setidx].count;
pageidx = sets[setidx].idx;
- ret = set_rcvarray_entry(fp, vaddr + (pageidx * PAGE_SIZE),
+ ret = set_rcvarray_entry(fd, vaddr + (pageidx * PAGE_SIZE),
rcventry, grp, pages + pageidx,
npages);
if (ret)
@@ -817,12 +833,11 @@ static int program_rcvarray(struct file *fp, unsigned long vaddr,
return idx;
}
-static int set_rcvarray_entry(struct file *fp, unsigned long vaddr,
+static int set_rcvarray_entry(struct hfi1_filedata *fd, unsigned long vaddr,
u32 rcventry, struct tid_group *grp,
struct page **pages, unsigned npages)
{
int ret;
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct tid_rb_node *node;
struct hfi1_devdata *dd = uctxt->dd;
@@ -876,10 +891,9 @@ static int set_rcvarray_entry(struct file *fp, unsigned long vaddr,
return 0;
}
-static int unprogram_rcvarray(struct file *fp, u32 tidinfo,
+static int unprogram_rcvarray(struct hfi1_filedata *fd, u32 tidinfo,
struct tid_group **grp)
{
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct hfi1_devdata *dd = uctxt->dd;
struct tid_rb_node *node;
diff --git a/drivers/infiniband/hw/hfi1/user_exp_rcv.h b/drivers/infiniband/hw/hfi1/user_exp_rcv.h
index 9bc8d9f..5250c89 100644
--- a/drivers/infiniband/hw/hfi1/user_exp_rcv.h
+++ b/drivers/infiniband/hw/hfi1/user_exp_rcv.h
@@ -1,7 +1,7 @@
#ifndef _HFI1_USER_EXP_RCV_H
#define _HFI1_USER_EXP_RCV_H
/*
- * Copyright(c) 2015, 2016 Intel Corporation.
+ * Copyright(c) 2015 - 2017 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
@@ -70,10 +70,15 @@
(tid) |= EXP_TID_SET(field, (value)); \
} while (0)
-int hfi1_user_exp_rcv_init(struct file *);
-int hfi1_user_exp_rcv_free(struct hfi1_filedata *);
-int hfi1_user_exp_rcv_setup(struct file *, struct hfi1_tid_info *);
-int hfi1_user_exp_rcv_clear(struct file *, struct hfi1_tid_info *);
-int hfi1_user_exp_rcv_invalid(struct file *, struct hfi1_tid_info *);
+void hfi1_user_exp_rcv_grp_free(struct hfi1_ctxtdata *uctxt);
+int hfi1_user_exp_rcv_grp_init(struct hfi1_filedata *fd);
+int hfi1_user_exp_rcv_init(struct hfi1_filedata *fd);
+void hfi1_user_exp_rcv_free(struct hfi1_filedata *fd);
+int hfi1_user_exp_rcv_setup(struct hfi1_filedata *fd,
+ struct hfi1_tid_info *tinfo);
+int hfi1_user_exp_rcv_clear(struct hfi1_filedata *fd,
+ struct hfi1_tid_info *tinfo);
+int hfi1_user_exp_rcv_invalid(struct hfi1_filedata *fd,
+ struct hfi1_tid_info *tinfo);
#endif /* _HFI1_USER_EXP_RCV_H */
diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c
index 0749689..d55339f 100644
--- a/drivers/infiniband/hw/hfi1/user_sdma.c
+++ b/drivers/infiniband/hw/hfi1/user_sdma.c
@@ -1,5 +1,5 @@
/*
- * Copyright(c) 2015, 2016 Intel Corporation.
+ * Copyright(c) 2015 - 2017 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
@@ -143,7 +143,9 @@ MODULE_PARM_DESC(sdma_comp_size, "Size of User SDMA completion ring. Default: 12
/* KDETH OM multipliers and switch over point */
#define KDETH_OM_SMALL 4
+#define KDETH_OM_SMALL_SHIFT 2
#define KDETH_OM_LARGE 64
+#define KDETH_OM_LARGE_SHIFT 6
#define KDETH_OM_MAX_SIZE (1 << ((KDETH_OM_LARGE / KDETH_OM_SMALL) + 1))
/* Tx request flag bits */
@@ -153,9 +155,8 @@ MODULE_PARM_DESC(sdma_comp_size, "Size of User SDMA completion ring. Default: 12
/* SDMA request flag bits */
#define SDMA_REQ_FOR_THREAD 1
#define SDMA_REQ_SEND_DONE 2
-#define SDMA_REQ_HAVE_AHG 3
-#define SDMA_REQ_HAS_ERROR 4
-#define SDMA_REQ_DONE_ERROR 5
+#define SDMA_REQ_HAS_ERROR 3
+#define SDMA_REQ_DONE_ERROR 4
#define SDMA_PKT_Q_INACTIVE BIT(0)
#define SDMA_PKT_Q_ACTIVE BIT(1)
@@ -214,7 +215,7 @@ struct user_sdma_request {
* each request will need it's own engine pointer.
*/
struct sdma_engine *sde;
- u8 ahg_idx;
+ s8 ahg_idx;
u32 ahg[9];
/*
* KDETH.Offset (Eager) field
@@ -229,12 +230,6 @@ struct user_sdma_request {
*/
u32 tidoffset;
/*
- * KDETH.OM
- * Remember this because the header template always sets it
- * to 0.
- */
- u8 omfactor;
- /*
* We copy the iovs for this request (based on
* info.iovcnt). These are only the data vectors
*/
@@ -284,39 +279,43 @@ struct user_sdma_txreq {
hfi1_cdbg(SDMA, "[%u:%u:%u] " fmt, (pq)->dd->unit, (pq)->ctxt, \
(pq)->subctxt, ##__VA_ARGS__)
-static int user_sdma_send_pkts(struct user_sdma_request *, unsigned);
-static int num_user_pages(const struct iovec *);
-static void user_sdma_txreq_cb(struct sdma_txreq *, int);
-static inline void pq_update(struct hfi1_user_sdma_pkt_q *);
-static void user_sdma_free_request(struct user_sdma_request *, bool);
-static int pin_vector_pages(struct user_sdma_request *,
- struct user_sdma_iovec *);
-static void unpin_vector_pages(struct mm_struct *, struct page **, unsigned,
- unsigned);
-static int check_header_template(struct user_sdma_request *,
- struct hfi1_pkt_header *, u32, u32);
-static int set_txreq_header(struct user_sdma_request *,
- struct user_sdma_txreq *, u32);
-static int set_txreq_header_ahg(struct user_sdma_request *,
- struct user_sdma_txreq *, u32);
-static inline void set_comp_state(struct hfi1_user_sdma_pkt_q *,
- struct hfi1_user_sdma_comp_q *,
- u16, enum hfi1_sdma_comp_state, int);
-static inline u32 set_pkt_bth_psn(__be32, u8, u32);
+static int user_sdma_send_pkts(struct user_sdma_request *req,
+ unsigned maxpkts);
+static int num_user_pages(const struct iovec *iov);
+static void user_sdma_txreq_cb(struct sdma_txreq *txreq, int status);
+static inline void pq_update(struct hfi1_user_sdma_pkt_q *pq);
+static void user_sdma_free_request(struct user_sdma_request *req, bool unpin);
+static int pin_vector_pages(struct user_sdma_request *req,
+ struct user_sdma_iovec *iovec);
+static void unpin_vector_pages(struct mm_struct *mm, struct page **pages,
+ unsigned start, unsigned npages);
+static int check_header_template(struct user_sdma_request *req,
+ struct hfi1_pkt_header *hdr, u32 lrhlen,
+ u32 datalen);
+static int set_txreq_header(struct user_sdma_request *req,
+ struct user_sdma_txreq *tx, u32 datalen);
+static int set_txreq_header_ahg(struct user_sdma_request *req,
+ struct user_sdma_txreq *tx, u32 len);
+static inline void set_comp_state(struct hfi1_user_sdma_pkt_q *pq,
+ struct hfi1_user_sdma_comp_q *cq,
+ u16 idx, enum hfi1_sdma_comp_state state,
+ int ret);
+static inline u32 set_pkt_bth_psn(__be32 bthpsn, u8 expct, u32 frags);
static inline u32 get_lrh_len(struct hfi1_pkt_header, u32 len);
static int defer_packet_queue(
- struct sdma_engine *,
- struct iowait *,
- struct sdma_txreq *,
- unsigned seq);
-static void activate_packet_queue(struct iowait *, int);
-static bool sdma_rb_filter(struct mmu_rb_node *, unsigned long, unsigned long);
-static int sdma_rb_insert(void *, struct mmu_rb_node *);
+ struct sdma_engine *sde,
+ struct iowait *wait,
+ struct sdma_txreq *txreq,
+ unsigned int seq);
+static void activate_packet_queue(struct iowait *wait, int reason);
+static bool sdma_rb_filter(struct mmu_rb_node *node, unsigned long addr,
+ unsigned long len);
+static int sdma_rb_insert(void *arg, struct mmu_rb_node *mnode);
static int sdma_rb_evict(void *arg, struct mmu_rb_node *mnode,
void *arg2, bool *stop);
-static void sdma_rb_remove(void *, struct mmu_rb_node *);
-static int sdma_rb_invalidate(void *, struct mmu_rb_node *);
+static void sdma_rb_remove(void *arg, struct mmu_rb_node *mnode);
+static int sdma_rb_invalidate(void *arg, struct mmu_rb_node *mnode);
static struct mmu_rb_ops sdma_rb_ops = {
.filter = sdma_rb_filter,
@@ -372,45 +371,27 @@ static void sdma_kmem_cache_ctor(void *obj)
memset(tx, 0, sizeof(*tx));
}
-int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt, struct file *fp)
+int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt,
+ struct hfi1_filedata *fd)
{
- struct hfi1_filedata *fd;
- int ret = 0;
+ int ret = -ENOMEM;
char buf[64];
struct hfi1_devdata *dd;
struct hfi1_user_sdma_comp_q *cq;
struct hfi1_user_sdma_pkt_q *pq;
unsigned long flags;
- if (!uctxt || !fp) {
- ret = -EBADF;
- goto done;
- }
+ if (!uctxt || !fd)
+ return -EBADF;
- fd = fp->private_data;
-
- if (!hfi1_sdma_comp_ring_size) {
- ret = -EINVAL;
- goto done;
- }
+ if (!hfi1_sdma_comp_ring_size)
+ return -EINVAL;
dd = uctxt->dd;
pq = kzalloc(sizeof(*pq), GFP_KERNEL);
if (!pq)
- goto pq_nomem;
-
- pq->reqs = kcalloc(hfi1_sdma_comp_ring_size,
- sizeof(*pq->reqs),
- GFP_KERNEL);
- if (!pq->reqs)
- goto pq_reqs_nomem;
-
- pq->req_in_use = kcalloc(BITS_TO_LONGS(hfi1_sdma_comp_ring_size),
- sizeof(*pq->req_in_use),
- GFP_KERNEL);
- if (!pq->req_in_use)
- goto pq_reqs_no_in_use;
+ return -ENOMEM;
INIT_LIST_HEAD(&pq->list);
pq->dd = dd;
@@ -426,10 +407,23 @@ int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt, struct file *fp)
iowait_init(&pq->busy, 0, NULL, defer_packet_queue,
activate_packet_queue, NULL);
pq->reqidx = 0;
+
+ pq->reqs = kcalloc(hfi1_sdma_comp_ring_size,
+ sizeof(*pq->reqs),
+ GFP_KERNEL);
+ if (!pq->reqs)
+ goto pq_reqs_nomem;
+
+ pq->req_in_use = kcalloc(BITS_TO_LONGS(hfi1_sdma_comp_ring_size),
+ sizeof(*pq->req_in_use),
+ GFP_KERNEL);
+ if (!pq->req_in_use)
+ goto pq_reqs_no_in_use;
+
snprintf(buf, 64, "txreq-kmem-cache-%u-%u-%u", dd->unit, uctxt->ctxt,
fd->subctxt);
pq->txreq_cache = kmem_cache_create(buf,
- sizeof(struct user_sdma_txreq),
+ sizeof(struct user_sdma_txreq),
L1_CACHE_BYTES,
SLAB_HWCACHE_ALIGN,
sdma_kmem_cache_ctor);
@@ -438,7 +432,7 @@ int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt, struct file *fp)
uctxt->ctxt);
goto pq_txreq_nomem;
}
- fd->pq = pq;
+
cq = kzalloc(sizeof(*cq), GFP_KERNEL);
if (!cq)
goto cq_nomem;
@@ -449,20 +443,25 @@ int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt, struct file *fp)
goto cq_comps_nomem;
cq->nentries = hfi1_sdma_comp_ring_size;
- fd->cq = cq;
ret = hfi1_mmu_rb_register(pq, pq->mm, &sdma_rb_ops, dd->pport->hfi1_wq,
&pq->handler);
if (ret) {
dd_dev_err(dd, "Failed to register with MMU %d", ret);
- goto done;
+ goto pq_mmu_fail;
}
+ fd->pq = pq;
+ fd->cq = cq;
+
spin_lock_irqsave(&uctxt->sdma_qlock, flags);
list_add(&pq->list, &uctxt->sdma_queues);
spin_unlock_irqrestore(&uctxt->sdma_qlock, flags);
- goto done;
+ return 0;
+
+pq_mmu_fail:
+ vfree(cq->comps);
cq_comps_nomem:
kfree(cq);
cq_nomem:
@@ -473,10 +472,7 @@ int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt, struct file *fp)
kfree(pq->reqs);
pq_reqs_nomem:
kfree(pq);
- fd->pq = NULL;
-pq_nomem:
- ret = -ENOMEM;
-done:
+
return ret;
}
@@ -536,11 +532,11 @@ static u8 dlid_to_selector(u16 dlid)
return mapping[hash];
}
-int hfi1_user_sdma_process_request(struct file *fp, struct iovec *iovec,
- unsigned long dim, unsigned long *count)
+int hfi1_user_sdma_process_request(struct hfi1_filedata *fd,
+ struct iovec *iovec, unsigned long dim,
+ unsigned long *count)
{
int ret = 0, i;
- struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct hfi1_user_sdma_pkt_q *pq = fd->pq;
struct hfi1_user_sdma_comp_q *cq = fd->cq;
@@ -616,6 +612,7 @@ int hfi1_user_sdma_process_request(struct file *fp, struct iovec *iovec,
req->pq = pq;
req->cq = cq;
req->status = -1;
+ req->ahg_idx = -1;
INIT_LIST_HEAD(&req->txps);
memcpy(&req->info, &info, sizeof(info));
@@ -766,14 +763,8 @@ int hfi1_user_sdma_process_request(struct file *fp, struct iovec *iovec,
}
/* We don't need an AHG entry if the request contains only one packet */
- if (req->info.npkts > 1 && HFI1_CAP_IS_USET(SDMA_AHG)) {
- int ahg = sdma_ahg_alloc(req->sde);
-
- if (likely(ahg >= 0)) {
- req->ahg_idx = (u8)ahg;
- set_bit(SDMA_REQ_HAVE_AHG, &req->flags);
- }
- }
+ if (req->info.npkts > 1 && HFI1_CAP_IS_USET(SDMA_AHG))
+ req->ahg_idx = sdma_ahg_alloc(req->sde);
set_comp_state(pq, cq, info.comp_idx, QUEUED, 0);
atomic_inc(&pq->n_reqs);
@@ -991,7 +982,7 @@ static int user_sdma_send_pkts(struct user_sdma_request *req, unsigned maxpkts)
}
}
- if (test_bit(SDMA_REQ_HAVE_AHG, &req->flags)) {
+ if (req->ahg_idx >= 0) {
if (!req->seqnum) {
u16 pbclen = le16_to_cpu(req->hdr.pbc[0]);
u32 lrhlen = get_lrh_len(req->hdr,
@@ -1121,7 +1112,7 @@ static int user_sdma_send_pkts(struct user_sdma_request *req, unsigned maxpkts)
* happen due to the sequential manner in which
* descriptors are processed.
*/
- if (test_bit(SDMA_REQ_HAVE_AHG, &req->flags))
+ if (req->ahg_idx >= 0)
sdma_ahg_free(req->sde, req->ahg_idx);
}
return ret;
@@ -1323,6 +1314,7 @@ static int set_txreq_header(struct user_sdma_request *req,
{
struct hfi1_user_sdma_pkt_q *pq = req->pq;
struct hfi1_pkt_header *hdr = &tx->hdr;
+ u8 omfactor; /* KDETH.OM */
u16 pbclen;
int ret;
u32 tidval = 0, lrhlen = get_lrh_len(*hdr, pad_len(datalen));
@@ -1400,8 +1392,9 @@ static int set_txreq_header(struct user_sdma_request *req,
}
tidval = req->tids[req->tididx];
}
- req->omfactor = EXP_TID_GET(tidval, LEN) * PAGE_SIZE >=
- KDETH_OM_MAX_SIZE ? KDETH_OM_LARGE : KDETH_OM_SMALL;
+ omfactor = EXP_TID_GET(tidval, LEN) * PAGE_SIZE >=
+ KDETH_OM_MAX_SIZE ? KDETH_OM_LARGE_SHIFT :
+ KDETH_OM_SMALL_SHIFT;
/* Set KDETH.TIDCtrl based on value for this TID. */
KDETH_SET(hdr->kdeth.ver_tid_offset, TIDCTRL,
EXP_TID_GET(tidval, CTRL));
@@ -1416,12 +1409,12 @@ static int set_txreq_header(struct user_sdma_request *req,
* transfer.
*/
SDMA_DBG(req, "TID offset %ubytes %uunits om%u",
- req->tidoffset, req->tidoffset / req->omfactor,
- req->omfactor != KDETH_OM_SMALL);
+ req->tidoffset, req->tidoffset >> omfactor,
+ omfactor != KDETH_OM_SMALL_SHIFT);
KDETH_SET(hdr->kdeth.ver_tid_offset, OFFSET,
- req->tidoffset / req->omfactor);
+ req->tidoffset >> omfactor);
KDETH_SET(hdr->kdeth.ver_tid_offset, OM,
- req->omfactor != KDETH_OM_SMALL);
+ omfactor != KDETH_OM_SMALL_SHIFT);
}
done:
trace_hfi1_sdma_user_header(pq->dd, pq->ctxt, pq->subctxt,
@@ -1433,6 +1426,7 @@ static int set_txreq_header_ahg(struct user_sdma_request *req,
struct user_sdma_txreq *tx, u32 len)
{
int diff = 0;
+ u8 omfactor; /* KDETH.OM */
struct hfi1_user_sdma_pkt_q *pq = req->pq;
struct hfi1_pkt_header *hdr = &req->hdr;
u16 pbclen = le16_to_cpu(hdr->pbc[0]);
@@ -1484,14 +1478,15 @@ static int set_txreq_header_ahg(struct user_sdma_request *req,
}
tidval = req->tids[req->tididx];
}
- req->omfactor = ((EXP_TID_GET(tidval, LEN) *
+ omfactor = ((EXP_TID_GET(tidval, LEN) *
PAGE_SIZE) >=
- KDETH_OM_MAX_SIZE) ? KDETH_OM_LARGE :
- KDETH_OM_SMALL;
+ KDETH_OM_MAX_SIZE) ? KDETH_OM_LARGE_SHIFT :
+ KDETH_OM_SMALL_SHIFT;
/* KDETH.OM and KDETH.OFFSET (TID) */
AHG_HEADER_SET(req->ahg, diff, 7, 0, 16,
- ((!!(req->omfactor - KDETH_OM_SMALL)) << 15 |
- ((req->tidoffset / req->omfactor) & 0x7fff)));
+ ((!!(omfactor - KDETH_OM_SMALL_SHIFT)) << 15 |
+ ((req->tidoffset >> omfactor)
+ & 0x7fff)));
/* KDETH.TIDCtrl, KDETH.TID, KDETH.Intr, KDETH.SH */
val = cpu_to_le16(((EXP_TID_GET(tidval, CTRL) & 0x3) << 10) |
(EXP_TID_GET(tidval, IDX) & 0x3ff));
diff --git a/drivers/infiniband/hw/hfi1/user_sdma.h b/drivers/infiniband/hw/hfi1/user_sdma.h
index 3900171..e5b10ae 100644
--- a/drivers/infiniband/hw/hfi1/user_sdma.h
+++ b/drivers/infiniband/hw/hfi1/user_sdma.h
@@ -1,5 +1,7 @@
+#ifndef _HFI1_USER_SDMA_H
+#define _HFI1_USER_SDMA_H
/*
- * Copyright(c) 2015, 2016 Intel Corporation.
+ * Copyright(c) 2015 - 2017 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
@@ -56,7 +58,7 @@ extern uint extended_psn;
struct hfi1_user_sdma_pkt_q {
struct list_head list;
unsigned ctxt;
- unsigned subctxt;
+ u16 subctxt;
u16 n_max_reqs;
atomic_t n_reqs;
u16 reqidx;
@@ -78,7 +80,11 @@ struct hfi1_user_sdma_comp_q {
struct hfi1_sdma_comp_entry *comps;
};
-int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *, struct file *);
-int hfi1_user_sdma_free_queues(struct hfi1_filedata *);
-int hfi1_user_sdma_process_request(struct file *, struct iovec *, unsigned long,
- unsigned long *);
+int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt,
+ struct hfi1_filedata *fd);
+int hfi1_user_sdma_free_queues(struct hfi1_filedata *fd);
+int hfi1_user_sdma_process_request(struct hfi1_filedata *fd,
+ struct iovec *iovec, unsigned long dim,
+ unsigned long *count);
+
+#endif /* _HFI1_USER_SDMA_H */
diff --git a/drivers/infiniband/hw/hfi1/verbs.h b/drivers/infiniband/hw/hfi1/verbs.h
index 52ff275..cd635d0 100644
--- a/drivers/infiniband/hw/hfi1/verbs.h
+++ b/drivers/infiniband/hw/hfi1/verbs.h
@@ -125,7 +125,6 @@ struct hfi1_qp_priv {
struct sdma_engine *s_sde; /* current sde */
struct send_context *s_sendcontext; /* current sendcontext */
u8 s_sc; /* SC[0..4] for next packet */
- u8 r_adefered; /* number of acks defered */
struct iowait s_iowait;
struct rvt_qp *owner;
};
@@ -140,6 +139,10 @@ struct hfi1_pkt_state {
struct hfi1_pportdata *ppd;
struct verbs_txreq *s_txreq;
unsigned long flags;
+ unsigned long timeout;
+ unsigned long timeout_int;
+ int cpu;
+ bool in_thread;
};
#define HFI1_PSN_CREDIT 16
diff --git a/drivers/infiniband/hw/hfi1/vnic_main.c b/drivers/infiniband/hw/hfi1/vnic_main.c
index 392f4d5..b601c29 100644
--- a/drivers/infiniband/hw/hfi1/vnic_main.c
+++ b/drivers/infiniband/hw/hfi1/vnic_main.c
@@ -67,9 +67,7 @@ static int setup_vnic_ctxt(struct hfi1_devdata *dd, struct hfi1_ctxtdata *uctxt)
unsigned int rcvctrl_ops = 0;
int ret;
- ret = hfi1_init_ctxt(uctxt->sc);
- if (ret)
- goto done;
+ hfi1_init_ctxt(uctxt->sc);
uctxt->do_interrupt = &handle_receive_interrupt;
@@ -82,8 +80,6 @@ static int setup_vnic_ctxt(struct hfi1_devdata *dd, struct hfi1_ctxtdata *uctxt)
if (ret)
goto done;
- set_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags);
-
if (uctxt->rcvhdrtail_kvaddr)
clear_rcvhdrtail(uctxt);
@@ -209,7 +205,7 @@ static void deallocate_vnic_ctxt(struct hfi1_devdata *dd,
uctxt->event_flags = 0;
hfi1_clear_tids(uctxt);
- hfi1_clear_ctxt_pkey(dd, uctxt->ctxt);
+ hfi1_clear_ctxt_pkey(dd, uctxt);
hfi1_stats.sps_ctxts--;
hfi1_free_ctxtdata(dd, uctxt);
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
index 014c826..37d5d29 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
@@ -1721,7 +1721,7 @@ int hns_roce_v1_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
roce_set_field(mpt_entry->mpt_byte_64, MPT_BYTE_64_L_KEY_IDX_H_M,
MPT_BYTE_64_L_KEY_IDX_H_S, mtpt_idx >> MTPT_IDX_SHIFT);
- /* DMA momery regsiter */
+ /* DMA memory register */
if (mr->type == MR_TYPE_DMA)
return 0;
diff --git a/drivers/infiniband/hw/hns/hns_roce_mr.c b/drivers/infiniband/hw/hns/hns_roce_mr.c
index dc5c97c..80fc01f 100644
--- a/drivers/infiniband/hw/hns/hns_roce_mr.c
+++ b/drivers/infiniband/hw/hns/hns_roce_mr.c
@@ -205,7 +205,7 @@ int hns_roce_mtt_init(struct hns_roce_dev *hr_dev, int npages, int page_shift,
return 0;
}
- /* Note: if page_shift is zero, FAST memory regsiter */
+ /* Note: if page_shift is zero, FAST memory register */
mtt->page_shift = page_shift;
/* Compute MTT entry necessary */
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 9f3ba32..d45772d 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -3530,6 +3530,26 @@ static int mlx5_ib_get_hw_stats(struct ib_device *ibdev,
return num_counters;
}
+static struct net_device*
+mlx5_ib_alloc_rdma_netdev(struct ib_device *hca,
+ u8 port_num,
+ enum rdma_netdev_t type,
+ const char *name,
+ unsigned char name_assign_type,
+ void (*setup)(struct net_device *))
+{
+ if (type != RDMA_NETDEV_IPOIB)
+ return ERR_PTR(-EOPNOTSUPP);
+
+ return mlx5_rdma_netdev_alloc(to_mdev(hca)->mdev, hca,
+ name, setup);
+}
+
+static void mlx5_ib_free_rdma_netdev(struct net_device *netdev)
+{
+ return mlx5_rdma_netdev_free(netdev);
+}
+
static void *mlx5_ib_add(struct mlx5_core_dev *mdev)
{
struct mlx5_ib_dev *dev;
@@ -3660,6 +3680,8 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev)
dev->ib_dev.check_mr_status = mlx5_ib_check_mr_status;
dev->ib_dev.get_port_immutable = mlx5_port_immutable;
dev->ib_dev.get_dev_fw_str = get_dev_fw_str;
+ dev->ib_dev.alloc_rdma_netdev = mlx5_ib_alloc_rdma_netdev;
+ dev->ib_dev.free_rdma_netdev = mlx5_ib_free_rdma_netdev;
if (mlx5_core_is_pf(mdev)) {
dev->ib_dev.get_vf_config = mlx5_ib_get_vf_config;
dev->ib_dev.set_vf_link_state = mlx5_ib_set_vf_link_state;
diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c
index ef11e77..6a72095 100644
--- a/drivers/infiniband/hw/qedr/main.c
+++ b/drivers/infiniband/hw/qedr/main.c
@@ -35,6 +35,7 @@
#include <rdma/ib_user_verbs.h>
#include <linux/netdevice.h>
#include <linux/iommu.h>
+#include <linux/pci.h>
#include <net/addrconf.h>
#include <linux/qed/qede_roce.h>
#include <linux/qed/qed_chain.h>
diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c
index f1e66ef..1d940a2 100644
--- a/drivers/infiniband/hw/qib/qib_fs.c
+++ b/drivers/infiniband/hw/qib/qib_fs.c
@@ -512,7 +512,7 @@ static int qibfs_fill_super(struct super_block *sb, void *data, int silent)
unsigned long flags;
int ret;
- static struct tree_descr files[] = {
+ static const struct tree_descr files[] = {
[2] = {"driver_stats", &driver_ops[0], S_IRUGO},
[3] = {"driver_stats_names", &driver_ops[1], S_IRUGO},
{""},
diff --git a/drivers/infiniband/sw/rxe/rxe_mr.c b/drivers/infiniband/sw/rxe/rxe_mr.c
index ced15c4..e37cc89 100644
--- a/drivers/infiniband/sw/rxe/rxe_mr.c
+++ b/drivers/infiniband/sw/rxe/rxe_mr.c
@@ -368,7 +368,7 @@ int rxe_mem_copy(struct rxe_mem *mem, u64 iova, void *addr, int length,
((void *)(uintptr_t)iova) : addr;
if (crcp)
- crc = rxe_crc32(to_rdev(mem->pd->ibpd.device),
+ *crcp = rxe_crc32(to_rdev(mem->pd->ibpd.device),
*crcp, src, length);
memcpy(dest, src, length);
diff --git a/drivers/infiniband/sw/rxe/rxe_param.h b/drivers/infiniband/sw/rxe/rxe_param.h
index 13ed2cc..1b596fb 100644
--- a/drivers/infiniband/sw/rxe/rxe_param.h
+++ b/drivers/infiniband/sw/rxe/rxe_param.h
@@ -114,7 +114,6 @@ enum rxe_device_param {
RXE_MAX_UCONTEXT = 512,
RXE_NUM_PORT = 1,
- RXE_NUM_COMP_VECTORS = 1,
RXE_MIN_QP_INDEX = 16,
RXE_MAX_QP_INDEX = 0x00020000,
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
index 299b0f8..83d709e 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -1239,7 +1239,7 @@ int rxe_register_device(struct rxe_dev *rxe)
dev->owner = THIS_MODULE;
dev->node_type = RDMA_NODE_IB_CA;
dev->phys_port_cnt = 1;
- dev->num_comp_vectors = RXE_NUM_COMP_VECTORS;
+ dev->num_comp_vectors = num_possible_cpus();
dev->dev.parent = rxe_dma_device(rxe);
dev->local_dma_lkey = 0;
addrconf_addr_eui48((unsigned char *)&dev->node_guid,
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
index 379c02f..874b243 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
@@ -155,7 +155,66 @@ static int ipoib_get_sset_count(struct net_device __always_unused *dev,
return -EOPNOTSUPP;
}
+/* Return lane speed in unit of 1e6 bit/sec */
+static inline int ib_speed_enum_to_int(int speed)
+{
+ switch (speed) {
+ case IB_SPEED_SDR:
+ return SPEED_2500;
+ case IB_SPEED_DDR:
+ return SPEED_5000;
+ case IB_SPEED_QDR:
+ case IB_SPEED_FDR10:
+ return SPEED_10000;
+ case IB_SPEED_FDR:
+ return SPEED_14000;
+ case IB_SPEED_EDR:
+ return SPEED_25000;
+ }
+
+ return SPEED_UNKNOWN;
+}
+
+static int ipoib_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct ipoib_dev_priv *priv = netdev_priv(netdev);
+ struct ib_port_attr attr;
+ int ret, speed, width;
+
+ if (!netif_carrier_ok(netdev)) {
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
+ return 0;
+ }
+
+ ret = ib_query_port(priv->ca, priv->port, &attr);
+ if (ret < 0)
+ return -EINVAL;
+
+ speed = ib_speed_enum_to_int(attr.active_speed);
+ width = ib_width_enum_to_int(attr.active_width);
+
+ if (speed < 0 || width < 0)
+ return -EINVAL;
+
+ /* Except the following are set, the other members of
+ * the struct ethtool_link_settings are initialized to
+ * zero in the function __ethtool_get_link_ksettings.
+ */
+ cmd->base.speed = speed * width;
+ cmd->base.duplex = DUPLEX_FULL;
+
+ cmd->base.phy_address = 0xFF;
+
+ cmd->base.autoneg = AUTONEG_ENABLE;
+ cmd->base.port = PORT_OTHER;
+
+ return 0;
+}
+
static const struct ethtool_ops ipoib_ethtool_ops = {
+ .get_link_ksettings = ipoib_get_link_ksettings,
.get_drvinfo = ipoib_get_drvinfo,
.get_coalesce = ipoib_get_coalesce,
.set_coalesce = ipoib_set_coalesce,
diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c
index 0633439..6629c47 100644
--- a/drivers/iommu/amd_iommu_v2.c
+++ b/drivers/iommu/amd_iommu_v2.c
@@ -696,9 +696,9 @@ int amd_iommu_bind_pasid(struct pci_dev *pdev, int pasid,
out_unregister:
mmu_notifier_unregister(&pasid_state->mn, mm);
+ mmput(mm);
out_free:
- mmput(mm);
free_pasid_state(pasid_state);
out:
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 591bb96..380969a 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -554,9 +554,14 @@ struct arm_smmu_s2_cfg {
};
struct arm_smmu_strtab_ent {
- bool valid;
-
- bool bypass; /* Overrides s1/s2 config */
+ /*
+ * An STE is "assigned" if the master emitting the corresponding SID
+ * is attached to a domain. The behaviour of an unassigned STE is
+ * determined by the disable_bypass parameter, whereas an assigned
+ * STE behaves according to s1_cfg/s2_cfg, which themselves are
+ * configured according to the domain type.
+ */
+ bool assigned;
struct arm_smmu_s1_cfg *s1_cfg;
struct arm_smmu_s2_cfg *s2_cfg;
};
@@ -632,6 +637,7 @@ enum arm_smmu_domain_stage {
ARM_SMMU_DOMAIN_S1 = 0,
ARM_SMMU_DOMAIN_S2,
ARM_SMMU_DOMAIN_NESTED,
+ ARM_SMMU_DOMAIN_BYPASS,
};
struct arm_smmu_domain {
@@ -1005,9 +1011,9 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid,
* This is hideously complicated, but we only really care about
* three cases at the moment:
*
- * 1. Invalid (all zero) -> bypass (init)
- * 2. Bypass -> translation (attach)
- * 3. Translation -> bypass (detach)
+ * 1. Invalid (all zero) -> bypass/fault (init)
+ * 2. Bypass/fault -> translation/bypass (attach)
+ * 3. Translation/bypass -> bypass/fault (detach)
*
* Given that we can't update the STE atomically and the SMMU
* doesn't read the thing in a defined order, that leaves us
@@ -1046,11 +1052,15 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid,
}
/* Nuke the existing STE_0 value, as we're going to rewrite it */
- val = ste->valid ? STRTAB_STE_0_V : 0;
+ val = STRTAB_STE_0_V;
- if (ste->bypass) {
- val |= disable_bypass ? STRTAB_STE_0_CFG_ABORT
- : STRTAB_STE_0_CFG_BYPASS;
+ /* Bypass/fault */
+ if (!ste->assigned || !(ste->s1_cfg || ste->s2_cfg)) {
+ if (!ste->assigned && disable_bypass)
+ val |= STRTAB_STE_0_CFG_ABORT;
+ else
+ val |= STRTAB_STE_0_CFG_BYPASS;
+
dst[0] = cpu_to_le64(val);
dst[1] = cpu_to_le64(STRTAB_STE_1_SHCFG_INCOMING
<< STRTAB_STE_1_SHCFG_SHIFT);
@@ -1111,10 +1121,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid,
static void arm_smmu_init_bypass_stes(u64 *strtab, unsigned int nent)
{
unsigned int i;
- struct arm_smmu_strtab_ent ste = {
- .valid = true,
- .bypass = true,
- };
+ struct arm_smmu_strtab_ent ste = { .assigned = false };
for (i = 0; i < nent; ++i) {
arm_smmu_write_strtab_ent(NULL, -1, strtab, &ste);
@@ -1378,7 +1385,9 @@ static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
{
struct arm_smmu_domain *smmu_domain;
- if (type != IOMMU_DOMAIN_UNMANAGED && type != IOMMU_DOMAIN_DMA)
+ if (type != IOMMU_DOMAIN_UNMANAGED &&
+ type != IOMMU_DOMAIN_DMA &&
+ type != IOMMU_DOMAIN_IDENTITY)
return NULL;
/*
@@ -1509,6 +1518,11 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain)
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct arm_smmu_device *smmu = smmu_domain->smmu;
+ if (domain->type == IOMMU_DOMAIN_IDENTITY) {
+ smmu_domain->stage = ARM_SMMU_DOMAIN_BYPASS;
+ return 0;
+ }
+
/* Restrict the stage to what we can actually support */
if (!(smmu->features & ARM_SMMU_FEAT_TRANS_S1))
smmu_domain->stage = ARM_SMMU_DOMAIN_S2;
@@ -1579,7 +1593,7 @@ static __le64 *arm_smmu_get_step_for_sid(struct arm_smmu_device *smmu, u32 sid)
return step;
}
-static int arm_smmu_install_ste_for_dev(struct iommu_fwspec *fwspec)
+static void arm_smmu_install_ste_for_dev(struct iommu_fwspec *fwspec)
{
int i;
struct arm_smmu_master_data *master = fwspec->iommu_priv;
@@ -1591,17 +1605,14 @@ static int arm_smmu_install_ste_for_dev(struct iommu_fwspec *fwspec)
arm_smmu_write_strtab_ent(smmu, sid, step, &master->ste);
}
-
- return 0;
}
static void arm_smmu_detach_dev(struct device *dev)
{
struct arm_smmu_master_data *master = dev->iommu_fwspec->iommu_priv;
- master->ste.bypass = true;
- if (arm_smmu_install_ste_for_dev(dev->iommu_fwspec) < 0)
- dev_warn(dev, "failed to install bypass STE\n");
+ master->ste.assigned = false;
+ arm_smmu_install_ste_for_dev(dev->iommu_fwspec);
}
static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
@@ -1620,7 +1631,7 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
ste = &master->ste;
/* Already attached to a different domain? */
- if (!ste->bypass)
+ if (ste->assigned)
arm_smmu_detach_dev(dev);
mutex_lock(&smmu_domain->init_mutex);
@@ -1641,10 +1652,12 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
goto out_unlock;
}
- ste->bypass = false;
- ste->valid = true;
+ ste->assigned = true;
- if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
+ if (smmu_domain->stage == ARM_SMMU_DOMAIN_BYPASS) {
+ ste->s1_cfg = NULL;
+ ste->s2_cfg = NULL;
+ } else if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
ste->s1_cfg = &smmu_domain->s1_cfg;
ste->s2_cfg = NULL;
arm_smmu_write_ctx_desc(smmu, ste->s1_cfg);
@@ -1653,10 +1666,7 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
ste->s2_cfg = &smmu_domain->s2_cfg;
}
- ret = arm_smmu_install_ste_for_dev(dev->iommu_fwspec);
- if (ret < 0)
- ste->valid = false;
-
+ arm_smmu_install_ste_for_dev(dev->iommu_fwspec);
out_unlock:
mutex_unlock(&smmu_domain->init_mutex);
return ret;
@@ -1704,6 +1714,9 @@ arm_smmu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova)
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct io_pgtable_ops *ops = smmu_domain->pgtbl_ops;
+ if (domain->type == IOMMU_DOMAIN_IDENTITY)
+ return iova;
+
if (!ops)
return 0;
@@ -1807,7 +1820,7 @@ static void arm_smmu_remove_device(struct device *dev)
master = fwspec->iommu_priv;
smmu = master->smmu;
- if (master && master->ste.valid)
+ if (master && master->ste.assigned)
arm_smmu_detach_dev(dev);
iommu_group_remove_device(dev);
iommu_device_unlink(&smmu->iommu, dev);
@@ -1837,6 +1850,9 @@ static int arm_smmu_domain_get_attr(struct iommu_domain *domain,
{
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ if (domain->type != IOMMU_DOMAIN_UNMANAGED)
+ return -EINVAL;
+
switch (attr) {
case DOMAIN_ATTR_NESTING:
*(int *)data = (smmu_domain->stage == ARM_SMMU_DOMAIN_NESTED);
@@ -1852,6 +1868,9 @@ static int arm_smmu_domain_set_attr(struct iommu_domain *domain,
int ret = 0;
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ if (domain->type != IOMMU_DOMAIN_UNMANAGED)
+ return -EINVAL;
+
mutex_lock(&smmu_domain->init_mutex);
switch (attr) {
@@ -1893,6 +1912,8 @@ static void arm_smmu_get_resv_regions(struct device *dev,
return;
list_add_tail(®ion->list, head);
+
+ iommu_dma_get_resv_regions(dev, head);
}
static void arm_smmu_put_resv_regions(struct device *dev,
@@ -2761,51 +2782,9 @@ static struct platform_driver arm_smmu_driver = {
.probe = arm_smmu_device_probe,
.remove = arm_smmu_device_remove,
};
+module_platform_driver(arm_smmu_driver);
-static int __init arm_smmu_init(void)
-{
- static bool registered;
- int ret = 0;
-
- if (!registered) {
- ret = platform_driver_register(&arm_smmu_driver);
- registered = !ret;
- }
- return ret;
-}
-
-static void __exit arm_smmu_exit(void)
-{
- return platform_driver_unregister(&arm_smmu_driver);
-}
-
-subsys_initcall(arm_smmu_init);
-module_exit(arm_smmu_exit);
-
-static int __init arm_smmu_of_init(struct device_node *np)
-{
- int ret = arm_smmu_init();
-
- if (ret)
- return ret;
-
- if (!of_platform_device_create(np, NULL, platform_bus_type.dev_root))
- return -ENODEV;
-
- return 0;
-}
-IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init);
-
-#ifdef CONFIG_ACPI
-static int __init acpi_smmu_v3_init(struct acpi_table_header *table)
-{
- if (iort_node_match(ACPI_IORT_NODE_SMMU_V3))
- return arm_smmu_init();
-
- return 0;
-}
-IORT_ACPI_DECLARE(arm_smmu_v3, ACPI_SIG_IORT, acpi_smmu_v3_init);
-#endif
+IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", NULL);
MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index b493c99..7ec30b0 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -162,6 +162,7 @@
#define ARM_SMMU_GR0_sTLBGSTATUS 0x74
#define sTLBGSTATUS_GSACTIVE (1 << 0)
#define TLB_LOOP_TIMEOUT 1000000 /* 1s! */
+#define TLB_SPIN_COUNT 10
/* Stream mapping registers */
#define ARM_SMMU_GR0_SMR(n) (0x800 + ((n) << 2))
@@ -216,8 +217,7 @@ enum arm_smmu_s2cr_privcfg {
#define CBA2R_VMID_MASK 0xffff
/* Translation context bank */
-#define ARM_SMMU_CB_BASE(smmu) ((smmu)->base + ((smmu)->size >> 1))
-#define ARM_SMMU_CB(smmu, n) ((n) * (1 << (smmu)->pgshift))
+#define ARM_SMMU_CB(smmu, n) ((smmu)->cb_base + ((n) << (smmu)->pgshift))
#define ARM_SMMU_CB_SCTLR 0x0
#define ARM_SMMU_CB_ACTLR 0x4
@@ -238,6 +238,8 @@ enum arm_smmu_s2cr_privcfg {
#define ARM_SMMU_CB_S1_TLBIVAL 0x620
#define ARM_SMMU_CB_S2_TLBIIPAS2 0x630
#define ARM_SMMU_CB_S2_TLBIIPAS2L 0x638
+#define ARM_SMMU_CB_TLBSYNC 0x7f0
+#define ARM_SMMU_CB_TLBSTATUS 0x7f4
#define ARM_SMMU_CB_ATS1PR 0x800
#define ARM_SMMU_CB_ATSR 0x8f0
@@ -344,7 +346,7 @@ struct arm_smmu_device {
struct device *dev;
void __iomem *base;
- unsigned long size;
+ void __iomem *cb_base;
unsigned long pgshift;
#define ARM_SMMU_FEAT_COHERENT_WALK (1 << 0)
@@ -404,18 +406,20 @@ enum arm_smmu_context_fmt {
struct arm_smmu_cfg {
u8 cbndx;
u8 irptndx;
+ union {
+ u16 asid;
+ u16 vmid;
+ };
u32 cbar;
enum arm_smmu_context_fmt fmt;
};
#define INVALID_IRPTNDX 0xff
-#define ARM_SMMU_CB_ASID(smmu, cfg) ((u16)(smmu)->cavium_id_base + (cfg)->cbndx)
-#define ARM_SMMU_CB_VMID(smmu, cfg) ((u16)(smmu)->cavium_id_base + (cfg)->cbndx + 1)
-
enum arm_smmu_domain_stage {
ARM_SMMU_DOMAIN_S1 = 0,
ARM_SMMU_DOMAIN_S2,
ARM_SMMU_DOMAIN_NESTED,
+ ARM_SMMU_DOMAIN_BYPASS,
};
struct arm_smmu_domain {
@@ -569,49 +573,67 @@ static void __arm_smmu_free_bitmap(unsigned long *map, int idx)
}
/* Wait for any pending TLB invalidations to complete */
-static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
+static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu,
+ void __iomem *sync, void __iomem *status)
{
- int count = 0;
- void __iomem *gr0_base = ARM_SMMU_GR0(smmu);
+ unsigned int spin_cnt, delay;
- writel_relaxed(0, gr0_base + ARM_SMMU_GR0_sTLBGSYNC);
- while (readl_relaxed(gr0_base + ARM_SMMU_GR0_sTLBGSTATUS)
- & sTLBGSTATUS_GSACTIVE) {
- cpu_relax();
- if (++count == TLB_LOOP_TIMEOUT) {
- dev_err_ratelimited(smmu->dev,
- "TLB sync timed out -- SMMU may be deadlocked\n");
- return;
+ writel_relaxed(0, sync);
+ for (delay = 1; delay < TLB_LOOP_TIMEOUT; delay *= 2) {
+ for (spin_cnt = TLB_SPIN_COUNT; spin_cnt > 0; spin_cnt--) {
+ if (!(readl_relaxed(status) & sTLBGSTATUS_GSACTIVE))
+ return;
+ cpu_relax();
}
- udelay(1);
+ udelay(delay);
}
+ dev_err_ratelimited(smmu->dev,
+ "TLB sync timed out -- SMMU may be deadlocked\n");
}
-static void arm_smmu_tlb_sync(void *cookie)
+static void arm_smmu_tlb_sync_global(struct arm_smmu_device *smmu)
+{
+ void __iomem *base = ARM_SMMU_GR0(smmu);
+
+ __arm_smmu_tlb_sync(smmu, base + ARM_SMMU_GR0_sTLBGSYNC,
+ base + ARM_SMMU_GR0_sTLBGSTATUS);
+}
+
+static void arm_smmu_tlb_sync_context(void *cookie)
{
struct arm_smmu_domain *smmu_domain = cookie;
- __arm_smmu_tlb_sync(smmu_domain->smmu);
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ void __iomem *base = ARM_SMMU_CB(smmu, smmu_domain->cfg.cbndx);
+
+ __arm_smmu_tlb_sync(smmu, base + ARM_SMMU_CB_TLBSYNC,
+ base + ARM_SMMU_CB_TLBSTATUS);
}
-static void arm_smmu_tlb_inv_context(void *cookie)
+static void arm_smmu_tlb_sync_vmid(void *cookie)
+{
+ struct arm_smmu_domain *smmu_domain = cookie;
+
+ arm_smmu_tlb_sync_global(smmu_domain->smmu);
+}
+
+static void arm_smmu_tlb_inv_context_s1(void *cookie)
{
struct arm_smmu_domain *smmu_domain = cookie;
struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+ void __iomem *base = ARM_SMMU_CB(smmu_domain->smmu, cfg->cbndx);
+
+ writel_relaxed(cfg->asid, base + ARM_SMMU_CB_S1_TLBIASID);
+ arm_smmu_tlb_sync_context(cookie);
+}
+
+static void arm_smmu_tlb_inv_context_s2(void *cookie)
+{
+ struct arm_smmu_domain *smmu_domain = cookie;
struct arm_smmu_device *smmu = smmu_domain->smmu;
- bool stage1 = cfg->cbar != CBAR_TYPE_S2_TRANS;
- void __iomem *base;
+ void __iomem *base = ARM_SMMU_GR0(smmu);
- if (stage1) {
- base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, cfg->cbndx);
- writel_relaxed(ARM_SMMU_CB_ASID(smmu, cfg),
- base + ARM_SMMU_CB_S1_TLBIASID);
- } else {
- base = ARM_SMMU_GR0(smmu);
- writel_relaxed(ARM_SMMU_CB_VMID(smmu, cfg),
- base + ARM_SMMU_GR0_TLBIVMID);
- }
-
- __arm_smmu_tlb_sync(smmu);
+ writel_relaxed(smmu_domain->cfg.vmid, base + ARM_SMMU_GR0_TLBIVMID);
+ arm_smmu_tlb_sync_global(smmu);
}
static void arm_smmu_tlb_inv_range_nosync(unsigned long iova, size_t size,
@@ -619,31 +641,28 @@ static void arm_smmu_tlb_inv_range_nosync(unsigned long iova, size_t size,
{
struct arm_smmu_domain *smmu_domain = cookie;
struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
- struct arm_smmu_device *smmu = smmu_domain->smmu;
bool stage1 = cfg->cbar != CBAR_TYPE_S2_TRANS;
- void __iomem *reg;
+ void __iomem *reg = ARM_SMMU_CB(smmu_domain->smmu, cfg->cbndx);
if (stage1) {
- reg = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, cfg->cbndx);
reg += leaf ? ARM_SMMU_CB_S1_TLBIVAL : ARM_SMMU_CB_S1_TLBIVA;
if (cfg->fmt != ARM_SMMU_CTX_FMT_AARCH64) {
iova &= ~12UL;
- iova |= ARM_SMMU_CB_ASID(smmu, cfg);
+ iova |= cfg->asid;
do {
writel_relaxed(iova, reg);
iova += granule;
} while (size -= granule);
} else {
iova >>= 12;
- iova |= (u64)ARM_SMMU_CB_ASID(smmu, cfg) << 48;
+ iova |= (u64)cfg->asid << 48;
do {
writeq_relaxed(iova, reg);
iova += granule >> 12;
} while (size -= granule);
}
- } else if (smmu->version == ARM_SMMU_V2) {
- reg = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, cfg->cbndx);
+ } else {
reg += leaf ? ARM_SMMU_CB_S2_TLBIIPAS2L :
ARM_SMMU_CB_S2_TLBIIPAS2;
iova >>= 12;
@@ -651,16 +670,40 @@ static void arm_smmu_tlb_inv_range_nosync(unsigned long iova, size_t size,
smmu_write_atomic_lq(iova, reg);
iova += granule >> 12;
} while (size -= granule);
- } else {
- reg = ARM_SMMU_GR0(smmu) + ARM_SMMU_GR0_TLBIVMID;
- writel_relaxed(ARM_SMMU_CB_VMID(smmu, cfg), reg);
}
}
-static const struct iommu_gather_ops arm_smmu_gather_ops = {
- .tlb_flush_all = arm_smmu_tlb_inv_context,
+/*
+ * On MMU-401 at least, the cost of firing off multiple TLBIVMIDs appears
+ * almost negligible, but the benefit of getting the first one in as far ahead
+ * of the sync as possible is significant, hence we don't just make this a
+ * no-op and set .tlb_sync to arm_smmu_inv_context_s2() as you might think.
+ */
+static void arm_smmu_tlb_inv_vmid_nosync(unsigned long iova, size_t size,
+ size_t granule, bool leaf, void *cookie)
+{
+ struct arm_smmu_domain *smmu_domain = cookie;
+ void __iomem *base = ARM_SMMU_GR0(smmu_domain->smmu);
+
+ writel_relaxed(smmu_domain->cfg.vmid, base + ARM_SMMU_GR0_TLBIVMID);
+}
+
+static const struct iommu_gather_ops arm_smmu_s1_tlb_ops = {
+ .tlb_flush_all = arm_smmu_tlb_inv_context_s1,
.tlb_add_flush = arm_smmu_tlb_inv_range_nosync,
- .tlb_sync = arm_smmu_tlb_sync,
+ .tlb_sync = arm_smmu_tlb_sync_context,
+};
+
+static const struct iommu_gather_ops arm_smmu_s2_tlb_ops_v2 = {
+ .tlb_flush_all = arm_smmu_tlb_inv_context_s2,
+ .tlb_add_flush = arm_smmu_tlb_inv_range_nosync,
+ .tlb_sync = arm_smmu_tlb_sync_context,
+};
+
+static const struct iommu_gather_ops arm_smmu_s2_tlb_ops_v1 = {
+ .tlb_flush_all = arm_smmu_tlb_inv_context_s2,
+ .tlb_add_flush = arm_smmu_tlb_inv_vmid_nosync,
+ .tlb_sync = arm_smmu_tlb_sync_vmid,
};
static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
@@ -673,7 +716,7 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
struct arm_smmu_device *smmu = smmu_domain->smmu;
void __iomem *cb_base;
- cb_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, cfg->cbndx);
+ cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
if (!(fsr & FSR_FAULT))
@@ -726,7 +769,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain,
gr1_base = ARM_SMMU_GR1(smmu);
stage1 = cfg->cbar != CBAR_TYPE_S2_TRANS;
- cb_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, cfg->cbndx);
+ cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
if (smmu->version > ARM_SMMU_V1) {
if (cfg->fmt == ARM_SMMU_CTX_FMT_AARCH64)
@@ -735,7 +778,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain,
reg = CBA2R_RW64_32BIT;
/* 16-bit VMIDs live in CBA2R */
if (smmu->features & ARM_SMMU_FEAT_VMID16)
- reg |= ARM_SMMU_CB_VMID(smmu, cfg) << CBA2R_VMID_SHIFT;
+ reg |= cfg->vmid << CBA2R_VMID_SHIFT;
writel_relaxed(reg, gr1_base + ARM_SMMU_GR1_CBA2R(cfg->cbndx));
}
@@ -754,34 +797,15 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain,
(CBAR_S1_MEMATTR_WB << CBAR_S1_MEMATTR_SHIFT);
} else if (!(smmu->features & ARM_SMMU_FEAT_VMID16)) {
/* 8-bit VMIDs live in CBAR */
- reg |= ARM_SMMU_CB_VMID(smmu, cfg) << CBAR_VMID_SHIFT;
+ reg |= cfg->vmid << CBAR_VMID_SHIFT;
}
writel_relaxed(reg, gr1_base + ARM_SMMU_GR1_CBAR(cfg->cbndx));
- /* TTBRs */
- if (stage1) {
- u16 asid = ARM_SMMU_CB_ASID(smmu, cfg);
-
- if (cfg->fmt == ARM_SMMU_CTX_FMT_AARCH32_S) {
- reg = pgtbl_cfg->arm_v7s_cfg.ttbr[0];
- writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBR0);
- reg = pgtbl_cfg->arm_v7s_cfg.ttbr[1];
- writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBR1);
- writel_relaxed(asid, cb_base + ARM_SMMU_CB_CONTEXTIDR);
- } else {
- reg64 = pgtbl_cfg->arm_lpae_s1_cfg.ttbr[0];
- reg64 |= (u64)asid << TTBRn_ASID_SHIFT;
- writeq_relaxed(reg64, cb_base + ARM_SMMU_CB_TTBR0);
- reg64 = pgtbl_cfg->arm_lpae_s1_cfg.ttbr[1];
- reg64 |= (u64)asid << TTBRn_ASID_SHIFT;
- writeq_relaxed(reg64, cb_base + ARM_SMMU_CB_TTBR1);
- }
- } else {
- reg64 = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
- writeq_relaxed(reg64, cb_base + ARM_SMMU_CB_TTBR0);
- }
-
- /* TTBCR */
+ /*
+ * TTBCR
+ * We must write this before the TTBRs, since it determines the
+ * access behaviour of some fields (in particular, ASID[15:8]).
+ */
if (stage1) {
if (cfg->fmt == ARM_SMMU_CTX_FMT_AARCH32_S) {
reg = pgtbl_cfg->arm_v7s_cfg.tcr;
@@ -800,6 +824,27 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain,
}
writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBCR);
+ /* TTBRs */
+ if (stage1) {
+ if (cfg->fmt == ARM_SMMU_CTX_FMT_AARCH32_S) {
+ reg = pgtbl_cfg->arm_v7s_cfg.ttbr[0];
+ writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBR0);
+ reg = pgtbl_cfg->arm_v7s_cfg.ttbr[1];
+ writel_relaxed(reg, cb_base + ARM_SMMU_CB_TTBR1);
+ writel_relaxed(cfg->asid, cb_base + ARM_SMMU_CB_CONTEXTIDR);
+ } else {
+ reg64 = pgtbl_cfg->arm_lpae_s1_cfg.ttbr[0];
+ reg64 |= (u64)cfg->asid << TTBRn_ASID_SHIFT;
+ writeq_relaxed(reg64, cb_base + ARM_SMMU_CB_TTBR0);
+ reg64 = pgtbl_cfg->arm_lpae_s1_cfg.ttbr[1];
+ reg64 |= (u64)cfg->asid << TTBRn_ASID_SHIFT;
+ writeq_relaxed(reg64, cb_base + ARM_SMMU_CB_TTBR1);
+ }
+ } else {
+ reg64 = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
+ writeq_relaxed(reg64, cb_base + ARM_SMMU_CB_TTBR0);
+ }
+
/* MAIRs (stage-1 only) */
if (stage1) {
if (cfg->fmt == ARM_SMMU_CTX_FMT_AARCH32_S) {
@@ -833,11 +878,18 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
enum io_pgtable_fmt fmt;
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+ const struct iommu_gather_ops *tlb_ops;
mutex_lock(&smmu_domain->init_mutex);
if (smmu_domain->smmu)
goto out_unlock;
+ if (domain->type == IOMMU_DOMAIN_IDENTITY) {
+ smmu_domain->stage = ARM_SMMU_DOMAIN_BYPASS;
+ smmu_domain->smmu = smmu;
+ goto out_unlock;
+ }
+
/*
* Mapping the requested stage onto what we support is surprisingly
* complicated, mainly because the spec allows S1+S2 SMMUs without
@@ -904,6 +956,7 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
ias = min(ias, 32UL);
oas = min(oas, 32UL);
}
+ tlb_ops = &arm_smmu_s1_tlb_ops;
break;
case ARM_SMMU_DOMAIN_NESTED:
/*
@@ -922,12 +975,15 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
ias = min(ias, 40UL);
oas = min(oas, 40UL);
}
+ if (smmu->version == ARM_SMMU_V2)
+ tlb_ops = &arm_smmu_s2_tlb_ops_v2;
+ else
+ tlb_ops = &arm_smmu_s2_tlb_ops_v1;
break;
default:
ret = -EINVAL;
goto out_unlock;
}
-
ret = __arm_smmu_alloc_bitmap(smmu->context_map, start,
smmu->num_context_banks);
if (ret < 0)
@@ -941,11 +997,16 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
cfg->irptndx = cfg->cbndx;
}
+ if (smmu_domain->stage == ARM_SMMU_DOMAIN_S2)
+ cfg->vmid = cfg->cbndx + 1 + smmu->cavium_id_base;
+ else
+ cfg->asid = cfg->cbndx + smmu->cavium_id_base;
+
pgtbl_cfg = (struct io_pgtable_cfg) {
.pgsize_bitmap = smmu->pgsize_bitmap,
.ias = ias,
.oas = oas,
- .tlb = &arm_smmu_gather_ops,
+ .tlb = tlb_ops,
.iommu_dev = smmu->dev,
};
@@ -998,14 +1059,14 @@ static void arm_smmu_destroy_domain_context(struct iommu_domain *domain)
void __iomem *cb_base;
int irq;
- if (!smmu)
+ if (!smmu || domain->type == IOMMU_DOMAIN_IDENTITY)
return;
/*
* Disable the context bank and free the page tables before freeing
* it.
*/
- cb_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, cfg->cbndx);
+ cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
writel_relaxed(0, cb_base + ARM_SMMU_CB_SCTLR);
if (cfg->irptndx != INVALID_IRPTNDX) {
@@ -1021,7 +1082,9 @@ static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
{
struct arm_smmu_domain *smmu_domain;
- if (type != IOMMU_DOMAIN_UNMANAGED && type != IOMMU_DOMAIN_DMA)
+ if (type != IOMMU_DOMAIN_UNMANAGED &&
+ type != IOMMU_DOMAIN_DMA &&
+ type != IOMMU_DOMAIN_IDENTITY)
return NULL;
/*
* Allocate the domain and initialise some of its data structures.
@@ -1250,10 +1313,15 @@ static int arm_smmu_domain_add_master(struct arm_smmu_domain *smmu_domain,
{
struct arm_smmu_device *smmu = smmu_domain->smmu;
struct arm_smmu_s2cr *s2cr = smmu->s2crs;
- enum arm_smmu_s2cr_type type = S2CR_TYPE_TRANS;
u8 cbndx = smmu_domain->cfg.cbndx;
+ enum arm_smmu_s2cr_type type;
int i, idx;
+ if (smmu_domain->stage == ARM_SMMU_DOMAIN_BYPASS)
+ type = S2CR_TYPE_BYPASS;
+ else
+ type = S2CR_TYPE_TRANS;
+
for_each_cfg_sme(fwspec, i, idx) {
if (type == s2cr[idx].type && cbndx == s2cr[idx].cbndx)
continue;
@@ -1356,7 +1424,7 @@ static phys_addr_t arm_smmu_iova_to_phys_hard(struct iommu_domain *domain,
u64 phys;
unsigned long va;
- cb_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, cfg->cbndx);
+ cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
/* ATS1 registers can only be written atomically */
va = iova & ~0xfffUL;
@@ -1391,6 +1459,9 @@ static phys_addr_t arm_smmu_iova_to_phys(struct iommu_domain *domain,
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct io_pgtable_ops *ops= smmu_domain->pgtbl_ops;
+ if (domain->type == IOMMU_DOMAIN_IDENTITY)
+ return iova;
+
if (!ops)
return 0;
@@ -1467,7 +1538,7 @@ static int arm_smmu_add_device(struct device *dev)
}
if (mask & ~smmu->smr_mask_mask) {
dev_err(dev, "SMR mask 0x%x out of range for SMMU (0x%x)\n",
- sid, smmu->smr_mask_mask);
+ mask, smmu->smr_mask_mask);
goto out_free;
}
}
@@ -1549,6 +1620,9 @@ static int arm_smmu_domain_get_attr(struct iommu_domain *domain,
{
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ if (domain->type != IOMMU_DOMAIN_UNMANAGED)
+ return -EINVAL;
+
switch (attr) {
case DOMAIN_ATTR_NESTING:
*(int *)data = (smmu_domain->stage == ARM_SMMU_DOMAIN_NESTED);
@@ -1564,6 +1638,9 @@ static int arm_smmu_domain_set_attr(struct iommu_domain *domain,
int ret = 0;
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ if (domain->type != IOMMU_DOMAIN_UNMANAGED)
+ return -EINVAL;
+
mutex_lock(&smmu_domain->init_mutex);
switch (attr) {
@@ -1590,13 +1667,15 @@ static int arm_smmu_domain_set_attr(struct iommu_domain *domain,
static int arm_smmu_of_xlate(struct device *dev, struct of_phandle_args *args)
{
- u32 fwid = 0;
+ u32 mask, fwid = 0;
if (args->args_count > 0)
fwid |= (u16)args->args[0];
if (args->args_count > 1)
fwid |= (u16)args->args[1] << SMR_MASK_SHIFT;
+ else if (!of_property_read_u32(args->np, "stream-match-mask", &mask))
+ fwid |= (u16)mask << SMR_MASK_SHIFT;
return iommu_fwspec_add_ids(dev, &fwid, 1);
}
@@ -1613,6 +1692,8 @@ static void arm_smmu_get_resv_regions(struct device *dev,
return;
list_add_tail(®ion->list, head);
+
+ iommu_dma_get_resv_regions(dev, head);
}
static void arm_smmu_put_resv_regions(struct device *dev,
@@ -1683,7 +1764,7 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu)
/* Make sure all context banks are disabled and clear CB_FSR */
for (i = 0; i < smmu->num_context_banks; ++i) {
- cb_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, i);
+ cb_base = ARM_SMMU_CB(smmu, i);
writel_relaxed(0, cb_base + ARM_SMMU_CB_SCTLR);
writel_relaxed(FSR_FAULT, cb_base + ARM_SMMU_CB_FSR);
/*
@@ -1729,7 +1810,7 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu)
reg |= sCR0_EXIDENABLE;
/* Push the button */
- __arm_smmu_tlb_sync(smmu);
+ arm_smmu_tlb_sync_global(smmu);
writel(reg, ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sCR0);
}
@@ -1863,11 +1944,11 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
/* Check for size mismatch of SMMU address space from mapped region */
size = 1 << (((id >> ID1_NUMPAGENDXB_SHIFT) & ID1_NUMPAGENDXB_MASK) + 1);
- size *= 2 << smmu->pgshift;
- if (smmu->size != size)
+ size <<= smmu->pgshift;
+ if (smmu->cb_base != gr0_base + size)
dev_warn(smmu->dev,
- "SMMU address space size (0x%lx) differs from mapped region size (0x%lx)!\n",
- size, smmu->size);
+ "SMMU address space size (0x%lx) differs from mapped region size (0x%tx)!\n",
+ size * 2, (smmu->cb_base - gr0_base) * 2);
smmu->num_s2_context_banks = (id >> ID1_NUMS2CB_SHIFT) & ID1_NUMS2CB_MASK;
smmu->num_context_banks = (id >> ID1_NUMCB_SHIFT) & ID1_NUMCB_MASK;
@@ -1887,6 +1968,7 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
atomic_add_return(smmu->num_context_banks,
&cavium_smmu_context_count);
smmu->cavium_id_base -= smmu->num_context_banks;
+ dev_notice(smmu->dev, "\tenabling workaround for Cavium erratum 27704\n");
}
/* ID2 */
@@ -2075,6 +2157,23 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
return 0;
}
+static void arm_smmu_bus_init(void)
+{
+ /* Oh, for a proper bus abstraction */
+ if (!iommu_present(&platform_bus_type))
+ bus_set_iommu(&platform_bus_type, &arm_smmu_ops);
+#ifdef CONFIG_ARM_AMBA
+ if (!iommu_present(&amba_bustype))
+ bus_set_iommu(&amba_bustype, &arm_smmu_ops);
+#endif
+#ifdef CONFIG_PCI
+ if (!iommu_present(&pci_bus_type)) {
+ pci_request_acs();
+ bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
+ }
+#endif
+}
+
static int arm_smmu_device_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -2103,7 +2202,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
smmu->base = devm_ioremap_resource(dev, res);
if (IS_ERR(smmu->base))
return PTR_ERR(smmu->base);
- smmu->size = resource_size(res);
+ smmu->cb_base = smmu->base + resource_size(res) / 2;
num_irqs = 0;
while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, num_irqs))) {
@@ -2180,22 +2279,31 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
arm_smmu_device_reset(smmu);
arm_smmu_test_smr_masks(smmu);
- /* Oh, for a proper bus abstraction */
- if (!iommu_present(&platform_bus_type))
- bus_set_iommu(&platform_bus_type, &arm_smmu_ops);
-#ifdef CONFIG_ARM_AMBA
- if (!iommu_present(&amba_bustype))
- bus_set_iommu(&amba_bustype, &arm_smmu_ops);
-#endif
-#ifdef CONFIG_PCI
- if (!iommu_present(&pci_bus_type)) {
- pci_request_acs();
- bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
- }
-#endif
+ /*
+ * For ACPI and generic DT bindings, an SMMU will be probed before
+ * any device which might need it, so we want the bus ops in place
+ * ready to handle default domain setup as soon as any SMMU exists.
+ */
+ if (!using_legacy_binding)
+ arm_smmu_bus_init();
+
return 0;
}
+/*
+ * With the legacy DT binding in play, though, we have no guarantees about
+ * probe order, but then we're also not doing default domains, so we can
+ * delay setting bus ops until we're sure every possible SMMU is ready,
+ * and that way ensure that no add_device() calls get missed.
+ */
+static int arm_smmu_legacy_bus_init(void)
+{
+ if (using_legacy_binding)
+ arm_smmu_bus_init();
+ return 0;
+}
+device_initcall_sync(arm_smmu_legacy_bus_init);
+
static int arm_smmu_device_remove(struct platform_device *pdev)
{
struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
@@ -2219,56 +2327,14 @@ static struct platform_driver arm_smmu_driver = {
.probe = arm_smmu_device_probe,
.remove = arm_smmu_device_remove,
};
+module_platform_driver(arm_smmu_driver);
-static int __init arm_smmu_init(void)
-{
- static bool registered;
- int ret = 0;
-
- if (!registered) {
- ret = platform_driver_register(&arm_smmu_driver);
- registered = !ret;
- }
- return ret;
-}
-
-static void __exit arm_smmu_exit(void)
-{
- return platform_driver_unregister(&arm_smmu_driver);
-}
-
-subsys_initcall(arm_smmu_init);
-module_exit(arm_smmu_exit);
-
-static int __init arm_smmu_of_init(struct device_node *np)
-{
- int ret = arm_smmu_init();
-
- if (ret)
- return ret;
-
- if (!of_platform_device_create(np, NULL, platform_bus_type.dev_root))
- return -ENODEV;
-
- return 0;
-}
-IOMMU_OF_DECLARE(arm_smmuv1, "arm,smmu-v1", arm_smmu_of_init);
-IOMMU_OF_DECLARE(arm_smmuv2, "arm,smmu-v2", arm_smmu_of_init);
-IOMMU_OF_DECLARE(arm_mmu400, "arm,mmu-400", arm_smmu_of_init);
-IOMMU_OF_DECLARE(arm_mmu401, "arm,mmu-401", arm_smmu_of_init);
-IOMMU_OF_DECLARE(arm_mmu500, "arm,mmu-500", arm_smmu_of_init);
-IOMMU_OF_DECLARE(cavium_smmuv2, "cavium,smmu-v2", arm_smmu_of_init);
-
-#ifdef CONFIG_ACPI
-static int __init arm_smmu_acpi_init(struct acpi_table_header *table)
-{
- if (iort_node_match(ACPI_IORT_NODE_SMMU))
- return arm_smmu_init();
-
- return 0;
-}
-IORT_ACPI_DECLARE(arm_smmu, ACPI_SIG_IORT, arm_smmu_acpi_init);
-#endif
+IOMMU_OF_DECLARE(arm_smmuv1, "arm,smmu-v1", NULL);
+IOMMU_OF_DECLARE(arm_smmuv2, "arm,smmu-v2", NULL);
+IOMMU_OF_DECLARE(arm_mmu400, "arm,mmu-400", NULL);
+IOMMU_OF_DECLARE(arm_mmu401, "arm,mmu-401", NULL);
+IOMMU_OF_DECLARE(arm_mmu500, "arm,mmu-500", NULL);
+IOMMU_OF_DECLARE(cavium_smmuv2, "cavium,smmu-v2", NULL);
MODULE_DESCRIPTION("IOMMU API for ARM architected SMMU implementations");
MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 48d36ce..8348f366 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -61,15 +61,6 @@ static inline size_t cookie_msi_granule(struct iommu_dma_cookie *cookie)
return PAGE_SIZE;
}
-static inline struct iova_domain *cookie_iovad(struct iommu_domain *domain)
-{
- struct iommu_dma_cookie *cookie = domain->iova_cookie;
-
- if (cookie->type == IOMMU_DMA_IOVA_COOKIE)
- return &cookie->iovad;
- return NULL;
-}
-
static struct iommu_dma_cookie *cookie_alloc(enum iommu_dma_cookie_type type)
{
struct iommu_dma_cookie *cookie;
@@ -167,23 +158,100 @@ void iommu_put_dma_cookie(struct iommu_domain *domain)
}
EXPORT_SYMBOL(iommu_put_dma_cookie);
-static void iova_reserve_pci_windows(struct pci_dev *dev,
- struct iova_domain *iovad)
+/**
+ * iommu_dma_get_resv_regions - Reserved region driver helper
+ * @dev: Device from iommu_get_resv_regions()
+ * @list: Reserved region list from iommu_get_resv_regions()
+ *
+ * IOMMU drivers can use this to implement their .get_resv_regions callback
+ * for general non-IOMMU-specific reservations. Currently, this covers host
+ * bridge windows for PCI devices.
+ */
+void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list)
{
- struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus);
+ struct pci_host_bridge *bridge;
struct resource_entry *window;
- unsigned long lo, hi;
+ if (!dev_is_pci(dev))
+ return;
+
+ bridge = pci_find_host_bridge(to_pci_dev(dev)->bus);
resource_list_for_each_entry(window, &bridge->windows) {
- if (resource_type(window->res) != IORESOURCE_MEM &&
- resource_type(window->res) != IORESOURCE_IO)
+ struct iommu_resv_region *region;
+ phys_addr_t start;
+ size_t length;
+
+ if (resource_type(window->res) != IORESOURCE_MEM)
continue;
- lo = iova_pfn(iovad, window->res->start - window->offset);
- hi = iova_pfn(iovad, window->res->end - window->offset);
- reserve_iova(iovad, lo, hi);
+ start = window->res->start - window->offset;
+ length = window->res->end - window->res->start + 1;
+ region = iommu_alloc_resv_region(start, length, 0,
+ IOMMU_RESV_RESERVED);
+ if (!region)
+ return;
+
+ list_add_tail(®ion->list, list);
}
}
+EXPORT_SYMBOL(iommu_dma_get_resv_regions);
+
+static int cookie_init_hw_msi_region(struct iommu_dma_cookie *cookie,
+ phys_addr_t start, phys_addr_t end)
+{
+ struct iova_domain *iovad = &cookie->iovad;
+ struct iommu_dma_msi_page *msi_page;
+ int i, num_pages;
+
+ start -= iova_offset(iovad, start);
+ num_pages = iova_align(iovad, end - start) >> iova_shift(iovad);
+
+ msi_page = kcalloc(num_pages, sizeof(*msi_page), GFP_KERNEL);
+ if (!msi_page)
+ return -ENOMEM;
+
+ for (i = 0; i < num_pages; i++) {
+ msi_page[i].phys = start;
+ msi_page[i].iova = start;
+ INIT_LIST_HEAD(&msi_page[i].list);
+ list_add(&msi_page[i].list, &cookie->msi_page_list);
+ start += iovad->granule;
+ }
+
+ return 0;
+}
+
+static int iova_reserve_iommu_regions(struct device *dev,
+ struct iommu_domain *domain)
+{
+ struct iommu_dma_cookie *cookie = domain->iova_cookie;
+ struct iova_domain *iovad = &cookie->iovad;
+ struct iommu_resv_region *region;
+ LIST_HEAD(resv_regions);
+ int ret = 0;
+
+ iommu_get_resv_regions(dev, &resv_regions);
+ list_for_each_entry(region, &resv_regions, list) {
+ unsigned long lo, hi;
+
+ /* We ARE the software that manages these! */
+ if (region->type == IOMMU_RESV_SW_MSI)
+ continue;
+
+ lo = iova_pfn(iovad, region->start);
+ hi = iova_pfn(iovad, region->start + region->length - 1);
+ reserve_iova(iovad, lo, hi);
+
+ if (region->type == IOMMU_RESV_MSI)
+ ret = cookie_init_hw_msi_region(cookie, region->start,
+ region->start + region->length);
+ if (ret)
+ break;
+ }
+ iommu_put_resv_regions(dev, &resv_regions);
+
+ return ret;
+}
/**
* iommu_dma_init_domain - Initialise a DMA mapping domain
@@ -203,7 +271,6 @@ int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base,
struct iommu_dma_cookie *cookie = domain->iova_cookie;
struct iova_domain *iovad = &cookie->iovad;
unsigned long order, base_pfn, end_pfn;
- bool pci = dev && dev_is_pci(dev);
if (!cookie || cookie->type != IOMMU_DMA_IOVA_COOKIE)
return -EINVAL;
@@ -233,7 +300,7 @@ int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base,
* leave the cache limit at the top of their range to save an rb_last()
* traversal on every allocation.
*/
- if (pci)
+ if (dev && dev_is_pci(dev))
end_pfn &= DMA_BIT_MASK(32) >> order;
/* start_pfn is always nonzero for an already-initialised domain */
@@ -248,12 +315,15 @@ int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base,
* area cache limit down for the benefit of the smaller one.
*/
iovad->dma_32bit_pfn = min(end_pfn, iovad->dma_32bit_pfn);
- } else {
- init_iova_domain(iovad, 1UL << order, base_pfn, end_pfn);
- if (pci)
- iova_reserve_pci_windows(to_pci_dev(dev), iovad);
+
+ return 0;
}
- return 0;
+
+ init_iova_domain(iovad, 1UL << order, base_pfn, end_pfn);
+ if (!dev)
+ return 0;
+
+ return iova_reserve_iommu_regions(dev, domain);
}
EXPORT_SYMBOL(iommu_dma_init_domain);
@@ -286,48 +356,67 @@ int dma_info_to_prot(enum dma_data_direction dir, bool coherent,
}
}
-static struct iova *__alloc_iova(struct iommu_domain *domain, size_t size,
- dma_addr_t dma_limit, struct device *dev)
+static dma_addr_t iommu_dma_alloc_iova(struct iommu_domain *domain,
+ size_t size, dma_addr_t dma_limit, struct device *dev)
{
- struct iova_domain *iovad = cookie_iovad(domain);
- unsigned long shift = iova_shift(iovad);
- unsigned long length = iova_align(iovad, size) >> shift;
- struct iova *iova = NULL;
+ struct iommu_dma_cookie *cookie = domain->iova_cookie;
+ struct iova_domain *iovad = &cookie->iovad;
+ unsigned long shift, iova_len, iova = 0;
+
+ if (cookie->type == IOMMU_DMA_MSI_COOKIE) {
+ cookie->msi_iova += size;
+ return cookie->msi_iova - size;
+ }
+
+ shift = iova_shift(iovad);
+ iova_len = size >> shift;
+ /*
+ * Freeing non-power-of-two-sized allocations back into the IOVA caches
+ * will come back to bite us badly, so we have to waste a bit of space
+ * rounding up anything cacheable to make sure that can't happen. The
+ * order of the unadjusted size will still match upon freeing.
+ */
+ if (iova_len < (1 << (IOVA_RANGE_CACHE_MAX_SIZE - 1)))
+ iova_len = roundup_pow_of_two(iova_len);
if (domain->geometry.force_aperture)
dma_limit = min(dma_limit, domain->geometry.aperture_end);
/* Try to get PCI devices a SAC address */
if (dma_limit > DMA_BIT_MASK(32) && dev_is_pci(dev))
- iova = alloc_iova(iovad, length, DMA_BIT_MASK(32) >> shift,
- true);
- /*
- * Enforce size-alignment to be safe - there could perhaps be an
- * attribute to control this per-device, or at least per-domain...
- */
- if (!iova)
- iova = alloc_iova(iovad, length, dma_limit >> shift, true);
+ iova = alloc_iova_fast(iovad, iova_len, DMA_BIT_MASK(32) >> shift);
- return iova;
+ if (!iova)
+ iova = alloc_iova_fast(iovad, iova_len, dma_limit >> shift);
+
+ return (dma_addr_t)iova << shift;
}
-/* The IOVA allocator knows what we mapped, so just unmap whatever that was */
-static void __iommu_dma_unmap(struct iommu_domain *domain, dma_addr_t dma_addr)
+static void iommu_dma_free_iova(struct iommu_dma_cookie *cookie,
+ dma_addr_t iova, size_t size)
{
- struct iova_domain *iovad = cookie_iovad(domain);
+ struct iova_domain *iovad = &cookie->iovad;
unsigned long shift = iova_shift(iovad);
- unsigned long pfn = dma_addr >> shift;
- struct iova *iova = find_iova(iovad, pfn);
- size_t size;
- if (WARN_ON(!iova))
- return;
+ /* The MSI case is only ever cleaning up its most recent allocation */
+ if (cookie->type == IOMMU_DMA_MSI_COOKIE)
+ cookie->msi_iova -= size;
+ else
+ free_iova_fast(iovad, iova >> shift, size >> shift);
+}
- size = iova_size(iova) << shift;
- size -= iommu_unmap(domain, pfn << shift, size);
- /* ...and if we can't, then something is horribly, horribly wrong */
- WARN_ON(size > 0);
- __free_iova(iovad, iova);
+static void __iommu_dma_unmap(struct iommu_domain *domain, dma_addr_t dma_addr,
+ size_t size)
+{
+ struct iommu_dma_cookie *cookie = domain->iova_cookie;
+ struct iova_domain *iovad = &cookie->iovad;
+ size_t iova_off = iova_offset(iovad, dma_addr);
+
+ dma_addr -= iova_off;
+ size = iova_align(iovad, size + iova_off);
+
+ WARN_ON(iommu_unmap(domain, dma_addr, size) != size);
+ iommu_dma_free_iova(cookie, dma_addr, size);
}
static void __iommu_dma_free_pages(struct page **pages, int count)
@@ -409,7 +498,7 @@ static struct page **__iommu_dma_alloc_pages(unsigned int count,
void iommu_dma_free(struct device *dev, struct page **pages, size_t size,
dma_addr_t *handle)
{
- __iommu_dma_unmap(iommu_get_domain_for_dev(dev), *handle);
+ __iommu_dma_unmap(iommu_get_domain_for_dev(dev), *handle, size);
__iommu_dma_free_pages(pages, PAGE_ALIGN(size) >> PAGE_SHIFT);
*handle = DMA_ERROR_CODE;
}
@@ -437,11 +526,11 @@ struct page **iommu_dma_alloc(struct device *dev, size_t size, gfp_t gfp,
void (*flush_page)(struct device *, const void *, phys_addr_t))
{
struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
- struct iova_domain *iovad = cookie_iovad(domain);
- struct iova *iova;
+ struct iommu_dma_cookie *cookie = domain->iova_cookie;
+ struct iova_domain *iovad = &cookie->iovad;
struct page **pages;
struct sg_table sgt;
- dma_addr_t dma_addr;
+ dma_addr_t iova;
unsigned int count, min_size, alloc_sizes = domain->pgsize_bitmap;
*handle = DMA_ERROR_CODE;
@@ -461,11 +550,11 @@ struct page **iommu_dma_alloc(struct device *dev, size_t size, gfp_t gfp,
if (!pages)
return NULL;
- iova = __alloc_iova(domain, size, dev->coherent_dma_mask, dev);
+ size = iova_align(iovad, size);
+ iova = iommu_dma_alloc_iova(domain, size, dev->coherent_dma_mask, dev);
if (!iova)
goto out_free_pages;
- size = iova_align(iovad, size);
if (sg_alloc_table_from_pages(&sgt, pages, count, 0, size, GFP_KERNEL))
goto out_free_iova;
@@ -481,19 +570,18 @@ struct page **iommu_dma_alloc(struct device *dev, size_t size, gfp_t gfp,
sg_miter_stop(&miter);
}
- dma_addr = iova_dma_addr(iovad, iova);
- if (iommu_map_sg(domain, dma_addr, sgt.sgl, sgt.orig_nents, prot)
+ if (iommu_map_sg(domain, iova, sgt.sgl, sgt.orig_nents, prot)
< size)
goto out_free_sg;
- *handle = dma_addr;
+ *handle = iova;
sg_free_table(&sgt);
return pages;
out_free_sg:
sg_free_table(&sgt);
out_free_iova:
- __free_iova(iovad, iova);
+ iommu_dma_free_iova(cookie, iova, size);
out_free_pages:
__iommu_dma_free_pages(pages, count);
return NULL;
@@ -527,22 +615,22 @@ int iommu_dma_mmap(struct page **pages, size_t size, struct vm_area_struct *vma)
static dma_addr_t __iommu_dma_map(struct device *dev, phys_addr_t phys,
size_t size, int prot)
{
- dma_addr_t dma_addr;
struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
- struct iova_domain *iovad = cookie_iovad(domain);
+ struct iommu_dma_cookie *cookie = domain->iova_cookie;
+ struct iova_domain *iovad = &cookie->iovad;
size_t iova_off = iova_offset(iovad, phys);
- size_t len = iova_align(iovad, size + iova_off);
- struct iova *iova = __alloc_iova(domain, len, dma_get_mask(dev), dev);
+ dma_addr_t iova;
+ size = iova_align(iovad, size + iova_off);
+ iova = iommu_dma_alloc_iova(domain, size, dma_get_mask(dev), dev);
if (!iova)
return DMA_ERROR_CODE;
- dma_addr = iova_dma_addr(iovad, iova);
- if (iommu_map(domain, dma_addr, phys - iova_off, len, prot)) {
- __free_iova(iovad, iova);
+ if (iommu_map(domain, iova, phys - iova_off, size, prot)) {
+ iommu_dma_free_iova(cookie, iova, size);
return DMA_ERROR_CODE;
}
- return dma_addr + iova_off;
+ return iova + iova_off;
}
dma_addr_t iommu_dma_map_page(struct device *dev, struct page *page,
@@ -554,7 +642,7 @@ dma_addr_t iommu_dma_map_page(struct device *dev, struct page *page,
void iommu_dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
enum dma_data_direction dir, unsigned long attrs)
{
- __iommu_dma_unmap(iommu_get_domain_for_dev(dev), handle);
+ __iommu_dma_unmap(iommu_get_domain_for_dev(dev), handle, size);
}
/*
@@ -643,10 +731,10 @@ int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
int nents, int prot)
{
struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
- struct iova_domain *iovad = cookie_iovad(domain);
- struct iova *iova;
+ struct iommu_dma_cookie *cookie = domain->iova_cookie;
+ struct iova_domain *iovad = &cookie->iovad;
struct scatterlist *s, *prev = NULL;
- dma_addr_t dma_addr;
+ dma_addr_t iova;
size_t iova_len = 0;
unsigned long mask = dma_get_seg_boundary(dev);
int i;
@@ -690,7 +778,7 @@ int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
prev = s;
}
- iova = __alloc_iova(domain, iova_len, dma_get_mask(dev), dev);
+ iova = iommu_dma_alloc_iova(domain, iova_len, dma_get_mask(dev), dev);
if (!iova)
goto out_restore_sg;
@@ -698,14 +786,13 @@ int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
* We'll leave any physical concatenation to the IOMMU driver's
* implementation - it knows better than we do.
*/
- dma_addr = iova_dma_addr(iovad, iova);
- if (iommu_map_sg(domain, dma_addr, sg, nents, prot) < iova_len)
+ if (iommu_map_sg(domain, iova, sg, nents, prot) < iova_len)
goto out_free_iova;
- return __finalise_sg(dev, sg, nents, dma_addr);
+ return __finalise_sg(dev, sg, nents, iova);
out_free_iova:
- __free_iova(iovad, iova);
+ iommu_dma_free_iova(cookie, iova, iova_len);
out_restore_sg:
__invalidate_sg(sg, nents);
return 0;
@@ -714,11 +801,21 @@ int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
void iommu_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir, unsigned long attrs)
{
+ dma_addr_t start, end;
+ struct scatterlist *tmp;
+ int i;
/*
* The scatterlist segments are mapped into a single
* contiguous IOVA allocation, so this is incredibly easy.
*/
- __iommu_dma_unmap(iommu_get_domain_for_dev(dev), sg_dma_address(sg));
+ start = sg_dma_address(sg);
+ for_each_sg(sg_next(sg), tmp, nents - 1, i) {
+ if (sg_dma_len(tmp) == 0)
+ break;
+ sg = tmp;
+ }
+ end = sg_dma_address(sg) + sg_dma_len(sg);
+ __iommu_dma_unmap(iommu_get_domain_for_dev(dev), start, end - start);
}
dma_addr_t iommu_dma_map_resource(struct device *dev, phys_addr_t phys,
@@ -731,7 +828,7 @@ dma_addr_t iommu_dma_map_resource(struct device *dev, phys_addr_t phys,
void iommu_dma_unmap_resource(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir, unsigned long attrs)
{
- __iommu_dma_unmap(iommu_get_domain_for_dev(dev), handle);
+ __iommu_dma_unmap(iommu_get_domain_for_dev(dev), handle, size);
}
int iommu_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
@@ -744,8 +841,7 @@ static struct iommu_dma_msi_page *iommu_dma_get_msi_page(struct device *dev,
{
struct iommu_dma_cookie *cookie = domain->iova_cookie;
struct iommu_dma_msi_page *msi_page;
- struct iova_domain *iovad = cookie_iovad(domain);
- struct iova *iova;
+ dma_addr_t iova;
int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
size_t size = cookie_msi_granule(cookie);
@@ -758,29 +854,16 @@ static struct iommu_dma_msi_page *iommu_dma_get_msi_page(struct device *dev,
if (!msi_page)
return NULL;
- msi_page->phys = msi_addr;
- if (iovad) {
- iova = __alloc_iova(domain, size, dma_get_mask(dev), dev);
- if (!iova)
- goto out_free_page;
- msi_page->iova = iova_dma_addr(iovad, iova);
- } else {
- msi_page->iova = cookie->msi_iova;
- cookie->msi_iova += size;
- }
-
- if (iommu_map(domain, msi_page->iova, msi_addr, size, prot))
- goto out_free_iova;
+ iova = __iommu_dma_map(dev, msi_addr, size, prot);
+ if (iommu_dma_mapping_error(dev, iova))
+ goto out_free_page;
INIT_LIST_HEAD(&msi_page->list);
+ msi_page->phys = msi_addr;
+ msi_page->iova = iova;
list_add(&msi_page->list, &cookie->msi_page_list);
return msi_page;
-out_free_iova:
- if (iovad)
- __free_iova(iovad, iova);
- else
- cookie->msi_iova -= size;
out_free_page:
kfree(msi_page);
return NULL;
diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 36e3f43..cbf7763 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -311,7 +311,7 @@ static int dmar_pci_bus_add_dev(struct dmar_pci_notify_info *info)
((void *)drhd) + drhd->header.length,
dmaru->segment,
dmaru->devices, dmaru->devices_cnt);
- if (ret != 0)
+ if (ret)
break;
}
if (ret >= 0)
@@ -391,7 +391,7 @@ static int dmar_parse_one_drhd(struct acpi_dmar_header *header, void *arg)
{
struct acpi_dmar_hardware_unit *drhd;
struct dmar_drhd_unit *dmaru;
- int ret = 0;
+ int ret;
drhd = (struct acpi_dmar_hardware_unit *)header;
dmaru = dmar_find_dmaru(drhd);
@@ -551,17 +551,16 @@ static int __init dmar_table_detect(void)
status = AE_NOT_FOUND;
}
- return (ACPI_SUCCESS(status) ? 1 : 0);
+ return ACPI_SUCCESS(status) ? 0 : -ENOENT;
}
static int dmar_walk_remapping_entries(struct acpi_dmar_header *start,
size_t len, struct dmar_res_callback *cb)
{
- int ret = 0;
struct acpi_dmar_header *iter, *next;
struct acpi_dmar_header *end = ((void *)start) + len;
- for (iter = start; iter < end && ret == 0; iter = next) {
+ for (iter = start; iter < end; iter = next) {
next = (void *)iter + iter->length;
if (iter->length == 0) {
/* Avoid looping forever on bad ACPI tables */
@@ -570,8 +569,7 @@ static int dmar_walk_remapping_entries(struct acpi_dmar_header *start,
} else if (next > end) {
/* Avoid passing table end */
pr_warn(FW_BUG "Record passes table end\n");
- ret = -EINVAL;
- break;
+ return -EINVAL;
}
if (cb->print_entry)
@@ -582,15 +580,19 @@ static int dmar_walk_remapping_entries(struct acpi_dmar_header *start,
pr_debug("Unknown DMAR structure type %d\n",
iter->type);
} else if (cb->cb[iter->type]) {
+ int ret;
+
ret = cb->cb[iter->type](iter, cb->arg[iter->type]);
+ if (ret)
+ return ret;
} else if (!cb->ignore_unhandled) {
pr_warn("No handler for DMAR structure type %d\n",
iter->type);
- ret = -EINVAL;
+ return -EINVAL;
}
}
- return ret;
+ return 0;
}
static inline int dmar_walk_dmar_table(struct acpi_table_dmar *dmar,
@@ -607,8 +609,8 @@ static int __init
parse_dmar_table(void)
{
struct acpi_table_dmar *dmar;
- int ret = 0;
int drhd_count = 0;
+ int ret;
struct dmar_res_callback cb = {
.print_entry = true,
.ignore_unhandled = true,
@@ -891,17 +893,17 @@ int __init detect_intel_iommu(void)
down_write(&dmar_global_lock);
ret = dmar_table_detect();
- if (ret)
- ret = !dmar_walk_dmar_table((struct acpi_table_dmar *)dmar_tbl,
- &validate_drhd_cb);
- if (ret && !no_iommu && !iommu_detected && !dmar_disabled) {
+ if (!ret)
+ ret = dmar_walk_dmar_table((struct acpi_table_dmar *)dmar_tbl,
+ &validate_drhd_cb);
+ if (!ret && !no_iommu && !iommu_detected && !dmar_disabled) {
iommu_detected = 1;
/* Make sure ACS will be enabled */
pci_request_acs();
}
#ifdef CONFIG_X86
- if (ret)
+ if (!ret)
x86_init.iommu.iommu_init = intel_iommu_init;
#endif
@@ -911,10 +913,9 @@ int __init detect_intel_iommu(void)
}
up_write(&dmar_global_lock);
- return ret ? 1 : -ENODEV;
+ return ret ? ret : 1;
}
-
static void unmap_iommu(struct intel_iommu *iommu)
{
iounmap(iommu->reg);
diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index c01bfcd..2395478 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -171,6 +171,9 @@ static u32 lv2ent_offset(sysmmu_iova_t iova)
#define REG_V5_PT_BASE_PFN 0x00C
#define REG_V5_MMU_FLUSH_ALL 0x010
#define REG_V5_MMU_FLUSH_ENTRY 0x014
+#define REG_V5_MMU_FLUSH_RANGE 0x018
+#define REG_V5_MMU_FLUSH_START 0x020
+#define REG_V5_MMU_FLUSH_END 0x024
#define REG_V5_INT_STATUS 0x060
#define REG_V5_INT_CLEAR 0x064
#define REG_V5_FAULT_AR_VA 0x070
@@ -319,14 +322,23 @@ static void __sysmmu_tlb_invalidate_entry(struct sysmmu_drvdata *data,
{
unsigned int i;
- for (i = 0; i < num_inv; i++) {
- if (MMU_MAJ_VER(data->version) < 5)
+ if (MMU_MAJ_VER(data->version) < 5) {
+ for (i = 0; i < num_inv; i++) {
writel((iova & SPAGE_MASK) | 1,
data->sfrbase + REG_MMU_FLUSH_ENTRY);
- else
+ iova += SPAGE_SIZE;
+ }
+ } else {
+ if (num_inv == 1) {
writel((iova & SPAGE_MASK) | 1,
data->sfrbase + REG_V5_MMU_FLUSH_ENTRY);
- iova += SPAGE_SIZE;
+ } else {
+ writel((iova & SPAGE_MASK),
+ data->sfrbase + REG_V5_MMU_FLUSH_START);
+ writel((iova & SPAGE_MASK) + (num_inv - 1) * SPAGE_SIZE,
+ data->sfrbase + REG_V5_MMU_FLUSH_END);
+ writel(1, data->sfrbase + REG_V5_MMU_FLUSH_RANGE);
+ }
}
}
@@ -747,16 +759,8 @@ static struct iommu_domain *exynos_iommu_domain_alloc(unsigned type)
goto err_counter;
/* Workaround for System MMU v3.3 to prevent caching 1MiB mapping */
- for (i = 0; i < NUM_LV1ENTRIES; i += 8) {
- domain->pgtable[i + 0] = ZERO_LV2LINK;
- domain->pgtable[i + 1] = ZERO_LV2LINK;
- domain->pgtable[i + 2] = ZERO_LV2LINK;
- domain->pgtable[i + 3] = ZERO_LV2LINK;
- domain->pgtable[i + 4] = ZERO_LV2LINK;
- domain->pgtable[i + 5] = ZERO_LV2LINK;
- domain->pgtable[i + 6] = ZERO_LV2LINK;
- domain->pgtable[i + 7] = ZERO_LV2LINK;
- }
+ for (i = 0; i < NUM_LV1ENTRIES; i++)
+ domain->pgtable[i] = ZERO_LV2LINK;
handle = dma_map_single(dma_dev, domain->pgtable, LV1TABLE_SIZE,
DMA_TO_DEVICE);
diff --git a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h
index aab723f..c3434f2 100644
--- a/drivers/iommu/fsl_pamu.h
+++ b/drivers/iommu/fsl_pamu.h
@@ -20,6 +20,7 @@
#define __FSL_PAMU_H
#include <linux/iommu.h>
+#include <linux/pci.h>
#include <asm/fsl_pamu_stash.h>
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index d412a31..90ab011 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -183,6 +183,7 @@ static int rwbf_quirk;
* (used when kernel is launched w/ TXT)
*/
static int force_on = 0;
+int intel_iommu_tboot_noforce;
/*
* 0: Present
@@ -607,6 +608,10 @@ static int __init intel_iommu_setup(char *str)
"Intel-IOMMU: enable pre-production PASID support\n");
intel_iommu_pasid28 = 1;
iommu_identity_mapping |= IDENTMAP_GFX;
+ } else if (!strncmp(str, "tboot_noforce", 13)) {
+ printk(KERN_INFO
+ "Intel-IOMMU: not forcing on after tboot. This could expose security risk for tboot\n");
+ intel_iommu_tboot_noforce = 1;
}
str += strcspn(str, ",");
@@ -4730,6 +4735,15 @@ static int intel_iommu_cpu_dead(unsigned int cpu)
return 0;
}
+static void intel_disable_iommus(void)
+{
+ struct intel_iommu *iommu = NULL;
+ struct dmar_drhd_unit *drhd;
+
+ for_each_iommu(iommu, drhd)
+ iommu_disable_translation(iommu);
+}
+
static inline struct intel_iommu *dev_to_intel_iommu(struct device *dev)
{
return container_of(dev, struct intel_iommu, iommu.dev);
@@ -4840,8 +4854,28 @@ int __init intel_iommu_init(void)
goto out_free_dmar;
}
- if (no_iommu || dmar_disabled)
+ if (no_iommu || dmar_disabled) {
+ /*
+ * We exit the function here to ensure IOMMU's remapping and
+ * mempool aren't setup, which means that the IOMMU's PMRs
+ * won't be disabled via the call to init_dmars(). So disable
+ * it explicitly here. The PMRs were setup by tboot prior to
+ * calling SENTER, but the kernel is expected to reset/tear
+ * down the PMRs.
+ */
+ if (intel_iommu_tboot_noforce) {
+ for_each_iommu(iommu, drhd)
+ iommu_disable_protect_mem_regions(iommu);
+ }
+
+ /*
+ * Make sure the IOMMUs are switched off, even when we
+ * boot into a kexec kernel and the previous kernel left
+ * them enabled
+ */
+ intel_disable_iommus();
goto out_free_dmar;
+ }
if (list_empty(&dmar_rmrr_units))
pr_info("No RMRR found\n");
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index ac59692..a190cbd 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -408,14 +408,6 @@ static int iommu_load_old_irte(struct intel_iommu *iommu)
size_t size;
u64 irta;
- if (!is_kdump_kernel()) {
- pr_warn("IRQ remapping was enabled on %s but we are not in kdump mode\n",
- iommu->name);
- clear_ir_pre_enabled(iommu);
- iommu_disable_irq_remapping(iommu);
- return -EINVAL;
- }
-
/* Check whether the old ir-table has the same size as ours */
irta = dmar_readq(iommu->reg + DMAR_IRTA_REG);
if ((irta & INTR_REMAP_TABLE_REG_SIZE_MASK)
@@ -567,7 +559,12 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu)
init_ir_status(iommu);
if (ir_pre_enabled(iommu)) {
- if (iommu_load_old_irte(iommu))
+ if (!is_kdump_kernel()) {
+ pr_warn("IRQ remapping was enabled on %s but we are not in kdump mode\n",
+ iommu->name);
+ clear_ir_pre_enabled(iommu);
+ iommu_disable_irq_remapping(iommu);
+ } else if (iommu_load_old_irte(iommu))
pr_err("Failed to copy IR table for %s from previous kernel\n",
iommu->name);
else
diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index f9bc6eb..6e5df5e 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -74,7 +74,7 @@
/* Calculate the block/page mapping size at level l for pagetable in d. */
#define ARM_LPAE_BLOCK_SIZE(l,d) \
- (1 << (ilog2(sizeof(arm_lpae_iopte)) + \
+ (1ULL << (ilog2(sizeof(arm_lpae_iopte)) + \
((ARM_LPAE_MAX_LEVELS - (l)) * (d)->bits_per_level)))
/* Page table bits */
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 3b67144..cf7ca7e 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -36,6 +36,7 @@
static struct kset *iommu_group_kset;
static DEFINE_IDA(iommu_group_ida);
+static unsigned int iommu_def_domain_type = IOMMU_DOMAIN_DMA;
struct iommu_callback_data {
const struct iommu_ops *ops;
@@ -112,6 +113,18 @@ static int __iommu_attach_group(struct iommu_domain *domain,
static void __iommu_detach_group(struct iommu_domain *domain,
struct iommu_group *group);
+static int __init iommu_set_def_domain_type(char *str)
+{
+ bool pt;
+
+ if (!str || strtobool(str, &pt))
+ return -EINVAL;
+
+ iommu_def_domain_type = pt ? IOMMU_DOMAIN_IDENTITY : IOMMU_DOMAIN_DMA;
+ return 0;
+}
+early_param("iommu.passthrough", iommu_set_def_domain_type);
+
static ssize_t iommu_group_attr_show(struct kobject *kobj,
struct attribute *__attr, char *buf)
{
@@ -1015,10 +1028,19 @@ struct iommu_group *iommu_group_get_for_dev(struct device *dev)
* IOMMU driver.
*/
if (!group->default_domain) {
- group->default_domain = __iommu_domain_alloc(dev->bus,
- IOMMU_DOMAIN_DMA);
+ struct iommu_domain *dom;
+
+ dom = __iommu_domain_alloc(dev->bus, iommu_def_domain_type);
+ if (!dom && iommu_def_domain_type != IOMMU_DOMAIN_DMA) {
+ dev_warn(dev,
+ "failed to allocate default IOMMU domain of type %u; falling back to IOMMU_DOMAIN_DMA",
+ iommu_def_domain_type);
+ dom = __iommu_domain_alloc(dev->bus, IOMMU_DOMAIN_DMA);
+ }
+
+ group->default_domain = dom;
if (!group->domain)
- group->domain = group->default_domain;
+ group->domain = dom;
}
ret = iommu_group_add_device(group, dev);
@@ -1083,8 +1105,12 @@ static int iommu_bus_notifier(struct notifier_block *nb,
* result in ADD/DEL notifiers to group->notifier
*/
if (action == BUS_NOTIFY_ADD_DEVICE) {
- if (ops->add_device)
- return ops->add_device(dev);
+ if (ops->add_device) {
+ int ret;
+
+ ret = ops->add_device(dev);
+ return (ret) ? NOTIFY_DONE : NOTIFY_OK;
+ }
} else if (action == BUS_NOTIFY_REMOVED_DEVICE) {
if (ops->remove_device && dev->iommu_group) {
ops->remove_device(dev);
@@ -1652,6 +1678,48 @@ void iommu_domain_window_disable(struct iommu_domain *domain, u32 wnd_nr)
}
EXPORT_SYMBOL_GPL(iommu_domain_window_disable);
+/**
+ * report_iommu_fault() - report about an IOMMU fault to the IOMMU framework
+ * @domain: the iommu domain where the fault has happened
+ * @dev: the device where the fault has happened
+ * @iova: the faulting address
+ * @flags: mmu fault flags (e.g. IOMMU_FAULT_READ/IOMMU_FAULT_WRITE/...)
+ *
+ * This function should be called by the low-level IOMMU implementations
+ * whenever IOMMU faults happen, to allow high-level users, that are
+ * interested in such events, to know about them.
+ *
+ * This event may be useful for several possible use cases:
+ * - mere logging of the event
+ * - dynamic TLB/PTE loading
+ * - if restarting of the faulting device is required
+ *
+ * Returns 0 on success and an appropriate error code otherwise (if dynamic
+ * PTE/TLB loading will one day be supported, implementations will be able
+ * to tell whether it succeeded or not according to this return value).
+ *
+ * Specifically, -ENOSYS is returned if a fault handler isn't installed
+ * (though fault handlers can also return -ENOSYS, in case they want to
+ * elicit the default behavior of the IOMMU drivers).
+ */
+int report_iommu_fault(struct iommu_domain *domain, struct device *dev,
+ unsigned long iova, int flags)
+{
+ int ret = -ENOSYS;
+
+ /*
+ * if upper layers showed interest and installed a fault handler,
+ * invoke it.
+ */
+ if (domain->handler)
+ ret = domain->handler(domain, dev, iova, flags,
+ domain->handler_token);
+
+ trace_io_page_fault(dev, iova, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(report_iommu_fault);
+
static int __init iommu_init(void)
{
iommu_group_kset = kset_create_and_add("iommu_groups",
diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index e80a410..5c88ba7 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -166,7 +166,7 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,
break; /* found a free slot */
}
adjust_limit_pfn:
- limit_pfn = curr_iova->pfn_lo - 1;
+ limit_pfn = curr_iova->pfn_lo ? (curr_iova->pfn_lo - 1) : 0;
move_left:
prev = curr;
curr = rb_prev(curr);
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 19e0100..a27ef57 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -431,9 +431,10 @@ static int mtk_iommu_create_mapping(struct device *dev,
static int mtk_iommu_add_device(struct device *dev)
{
- struct iommu_group *group;
struct of_phandle_args iommu_spec;
struct of_phandle_iterator it;
+ struct mtk_iommu_data *data;
+ struct iommu_group *group;
int err;
of_for_each_phandle(&it, err, dev->of_node, "iommus",
@@ -450,6 +451,9 @@ static int mtk_iommu_add_device(struct device *dev)
if (!dev->iommu_fwspec || dev->iommu_fwspec->ops != &mtk_iommu_ops)
return -ENODEV; /* Not a iommu client device */
+ data = dev->iommu_fwspec->iommu_priv;
+ iommu_device_link(&data->iommu, dev);
+
group = iommu_group_get_for_dev(dev);
if (IS_ERR(group))
return PTR_ERR(group);
@@ -460,9 +464,14 @@ static int mtk_iommu_add_device(struct device *dev)
static void mtk_iommu_remove_device(struct device *dev)
{
+ struct mtk_iommu_data *data;
+
if (!dev->iommu_fwspec || dev->iommu_fwspec->ops != &mtk_iommu_ops)
return;
+ data = dev->iommu_fwspec->iommu_priv;
+ iommu_device_unlink(&data->iommu, dev);
+
iommu_group_remove_device(dev);
iommu_fwspec_free(dev);
}
@@ -627,6 +636,17 @@ static int mtk_iommu_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = iommu_device_sysfs_add(&data->iommu, &pdev->dev, NULL,
+ dev_name(&pdev->dev));
+ if (ret)
+ return ret;
+
+ iommu_device_set_ops(&data->iommu, &mtk_iommu_ops);
+
+ ret = iommu_device_register(&data->iommu);
+ if (ret)
+ return ret;
+
if (!iommu_present(&platform_bus_type))
bus_set_iommu(&platform_bus_type, &mtk_iommu_ops);
@@ -637,6 +657,9 @@ static int mtk_iommu_remove(struct platform_device *pdev)
{
struct mtk_iommu_data *data = platform_get_drvdata(pdev);
+ iommu_device_sysfs_remove(&data->iommu);
+ iommu_device_unregister(&data->iommu);
+
if (iommu_present(&platform_bus_type))
bus_set_iommu(&platform_bus_type, NULL);
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index 2683e9f..9f44ee8 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -96,6 +96,49 @@ int of_get_dma_window(struct device_node *dn, const char *prefix, int index,
}
EXPORT_SYMBOL_GPL(of_get_dma_window);
+static bool of_iommu_driver_present(struct device_node *np)
+{
+ /*
+ * If the IOMMU still isn't ready by the time we reach init, assume
+ * it never will be. We don't want to defer indefinitely, nor attempt
+ * to dereference __iommu_of_table after it's been freed.
+ */
+ if (system_state > SYSTEM_BOOTING)
+ return false;
+
+ return of_match_node(&__iommu_of_table, np);
+}
+
+static const struct iommu_ops
+*of_iommu_xlate(struct device *dev, struct of_phandle_args *iommu_spec)
+{
+ const struct iommu_ops *ops;
+ struct fwnode_handle *fwnode = &iommu_spec->np->fwnode;
+ int err;
+
+ ops = iommu_ops_from_fwnode(fwnode);
+ if ((ops && !ops->of_xlate) ||
+ (!ops && !of_iommu_driver_present(iommu_spec->np)))
+ return NULL;
+
+ err = iommu_fwspec_init(dev, &iommu_spec->np->fwnode, ops);
+ if (err)
+ return ERR_PTR(err);
+ /*
+ * The otherwise-empty fwspec handily serves to indicate the specific
+ * IOMMU device we're waiting for, which will be useful if we ever get
+ * a proper probe-ordering dependency mechanism in future.
+ */
+ if (!ops)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ err = ops->of_xlate(dev, iommu_spec);
+ if (err)
+ return ERR_PTR(err);
+
+ return ops;
+}
+
static int __get_pci_rid(struct pci_dev *pdev, u16 alias, void *data)
{
struct of_phandle_args *iommu_spec = data;
@@ -105,10 +148,11 @@ static int __get_pci_rid(struct pci_dev *pdev, u16 alias, void *data)
}
static const struct iommu_ops
-*of_pci_iommu_configure(struct pci_dev *pdev, struct device_node *bridge_np)
+*of_pci_iommu_init(struct pci_dev *pdev, struct device_node *bridge_np)
{
const struct iommu_ops *ops;
struct of_phandle_args iommu_spec;
+ int err;
/*
* Start by tracing the RID alias down the PCI topology as
@@ -123,56 +167,76 @@ static const struct iommu_ops
* bus into the system beyond, and which IOMMU it ends up at.
*/
iommu_spec.np = NULL;
- if (of_pci_map_rid(bridge_np, iommu_spec.args[0], "iommu-map",
- "iommu-map-mask", &iommu_spec.np, iommu_spec.args))
- return NULL;
+ err = of_pci_map_rid(bridge_np, iommu_spec.args[0], "iommu-map",
+ "iommu-map-mask", &iommu_spec.np,
+ iommu_spec.args);
+ if (err)
+ return err == -ENODEV ? NULL : ERR_PTR(err);
- ops = iommu_ops_from_fwnode(&iommu_spec.np->fwnode);
- if (!ops || !ops->of_xlate ||
- iommu_fwspec_init(&pdev->dev, &iommu_spec.np->fwnode, ops) ||
- ops->of_xlate(&pdev->dev, &iommu_spec))
- ops = NULL;
+ ops = of_iommu_xlate(&pdev->dev, &iommu_spec);
of_node_put(iommu_spec.np);
return ops;
}
-const struct iommu_ops *of_iommu_configure(struct device *dev,
- struct device_node *master_np)
+static const struct iommu_ops
+*of_platform_iommu_init(struct device *dev, struct device_node *np)
{
struct of_phandle_args iommu_spec;
- struct device_node *np;
const struct iommu_ops *ops = NULL;
int idx = 0;
- if (dev_is_pci(dev))
- return of_pci_iommu_configure(to_pci_dev(dev), master_np);
-
/*
* We don't currently walk up the tree looking for a parent IOMMU.
* See the `Notes:' section of
* Documentation/devicetree/bindings/iommu/iommu.txt
*/
- while (!of_parse_phandle_with_args(master_np, "iommus",
- "#iommu-cells", idx,
- &iommu_spec)) {
- np = iommu_spec.np;
- ops = iommu_ops_from_fwnode(&np->fwnode);
-
- if (!ops || !ops->of_xlate ||
- iommu_fwspec_init(dev, &np->fwnode, ops) ||
- ops->of_xlate(dev, &iommu_spec))
- goto err_put_node;
-
- of_node_put(np);
+ while (!of_parse_phandle_with_args(np, "iommus", "#iommu-cells",
+ idx, &iommu_spec)) {
+ ops = of_iommu_xlate(dev, &iommu_spec);
+ of_node_put(iommu_spec.np);
idx++;
+ if (IS_ERR_OR_NULL(ops))
+ break;
}
return ops;
+}
-err_put_node:
- of_node_put(np);
- return NULL;
+const struct iommu_ops *of_iommu_configure(struct device *dev,
+ struct device_node *master_np)
+{
+ const struct iommu_ops *ops;
+ struct iommu_fwspec *fwspec = dev->iommu_fwspec;
+
+ if (!master_np)
+ return NULL;
+
+ if (fwspec) {
+ if (fwspec->ops)
+ return fwspec->ops;
+
+ /* In the deferred case, start again from scratch */
+ iommu_fwspec_free(dev);
+ }
+
+ if (dev_is_pci(dev))
+ ops = of_pci_iommu_init(to_pci_dev(dev), master_np);
+ else
+ ops = of_platform_iommu_init(dev, master_np);
+ /*
+ * If we have reason to believe the IOMMU driver missed the initial
+ * add_device callback for dev, replay it to get things in order.
+ */
+ if (!IS_ERR_OR_NULL(ops) && ops->add_device &&
+ dev->bus && !dev->iommu_group) {
+ int err = ops->add_device(dev);
+
+ if (err)
+ ops = ERR_PTR(err);
+ }
+
+ return ops;
}
static int __init of_iommu_init(void)
@@ -183,7 +247,7 @@ static int __init of_iommu_init(void)
for_each_matching_node_and_match(np, matches, &match) {
const of_iommu_init_fn init_fn = match->data;
- if (init_fn(np))
+ if (init_fn && init_fn(np))
pr_err("Failed to initialise IOMMU %s\n",
of_node_full_name(np));
}
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index e2583cc..95dfca3 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -36,28 +36,14 @@
#include "omap-iopgtable.h"
#include "omap-iommu.h"
+static const struct iommu_ops omap_iommu_ops;
+
#define to_iommu(dev) \
((struct omap_iommu *)platform_get_drvdata(to_platform_device(dev)))
/* bitmap of the page sizes currently supported */
#define OMAP_IOMMU_PGSIZES (SZ_4K | SZ_64K | SZ_1M | SZ_16M)
-/**
- * struct omap_iommu_domain - omap iommu domain
- * @pgtable: the page table
- * @iommu_dev: an omap iommu device attached to this domain. only a single
- * iommu device can be attached for now.
- * @dev: Device using this domain.
- * @lock: domain lock, should be taken when attaching/detaching
- */
-struct omap_iommu_domain {
- u32 *pgtable;
- struct omap_iommu *iommu_dev;
- struct device *dev;
- spinlock_t lock;
- struct iommu_domain domain;
-};
-
#define MMU_LOCK_BASE_SHIFT 10
#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
#define MMU_LOCK_BASE(x) \
@@ -818,33 +804,14 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
return IRQ_NONE;
}
-static int device_match_by_alias(struct device *dev, void *data)
-{
- struct omap_iommu *obj = to_iommu(dev);
- const char *name = data;
-
- pr_debug("%s: %s %s\n", __func__, obj->name, name);
-
- return strcmp(obj->name, name) == 0;
-}
-
/**
* omap_iommu_attach() - attach iommu device to an iommu domain
- * @name: name of target omap iommu device
+ * @obj: target omap iommu device
* @iopgd: page table
**/
-static struct omap_iommu *omap_iommu_attach(const char *name, u32 *iopgd)
+static int omap_iommu_attach(struct omap_iommu *obj, u32 *iopgd)
{
int err;
- struct device *dev;
- struct omap_iommu *obj;
-
- dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
- device_match_by_alias);
- if (!dev)
- return ERR_PTR(-ENODEV);
-
- obj = to_iommu(dev);
spin_lock(&obj->iommu_lock);
@@ -857,11 +824,13 @@ static struct omap_iommu *omap_iommu_attach(const char *name, u32 *iopgd)
spin_unlock(&obj->iommu_lock);
dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
- return obj;
+
+ return 0;
err_enable:
spin_unlock(&obj->iommu_lock);
- return ERR_PTR(err);
+
+ return err;
}
/**
@@ -928,28 +897,26 @@ static int omap_iommu_probe(struct platform_device *pdev)
int irq;
struct omap_iommu *obj;
struct resource *res;
- struct iommu_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *of = pdev->dev.of_node;
+ if (!of) {
+ pr_err("%s: only DT-based devices are supported\n", __func__);
+ return -ENODEV;
+ }
+
obj = devm_kzalloc(&pdev->dev, sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
if (!obj)
return -ENOMEM;
- if (of) {
- obj->name = dev_name(&pdev->dev);
- obj->nr_tlb_entries = 32;
- err = of_property_read_u32(of, "ti,#tlb-entries",
- &obj->nr_tlb_entries);
- if (err && err != -EINVAL)
- return err;
- if (obj->nr_tlb_entries != 32 && obj->nr_tlb_entries != 8)
- return -EINVAL;
- if (of_find_property(of, "ti,iommu-bus-err-back", NULL))
- obj->has_bus_err_back = MMU_GP_REG_BUS_ERR_BACK_EN;
- } else {
- obj->nr_tlb_entries = pdata->nr_tlb_entries;
- obj->name = pdata->name;
- }
+ obj->name = dev_name(&pdev->dev);
+ obj->nr_tlb_entries = 32;
+ err = of_property_read_u32(of, "ti,#tlb-entries", &obj->nr_tlb_entries);
+ if (err && err != -EINVAL)
+ return err;
+ if (obj->nr_tlb_entries != 32 && obj->nr_tlb_entries != 8)
+ return -EINVAL;
+ if (of_find_property(of, "ti,iommu-bus-err-back", NULL))
+ obj->has_bus_err_back = MMU_GP_REG_BUS_ERR_BACK_EN;
obj->dev = &pdev->dev;
obj->ctx = (void *)obj + sizeof(*obj);
@@ -976,19 +943,46 @@ static int omap_iommu_probe(struct platform_device *pdev)
return err;
platform_set_drvdata(pdev, obj);
+ obj->group = iommu_group_alloc();
+ if (IS_ERR(obj->group))
+ return PTR_ERR(obj->group);
+
+ err = iommu_device_sysfs_add(&obj->iommu, obj->dev, NULL, obj->name);
+ if (err)
+ goto out_group;
+
+ iommu_device_set_ops(&obj->iommu, &omap_iommu_ops);
+
+ err = iommu_device_register(&obj->iommu);
+ if (err)
+ goto out_sysfs;
+
pm_runtime_irq_safe(obj->dev);
pm_runtime_enable(obj->dev);
omap_iommu_debugfs_add(obj);
dev_info(&pdev->dev, "%s registered\n", obj->name);
+
return 0;
+
+out_sysfs:
+ iommu_device_sysfs_remove(&obj->iommu);
+out_group:
+ iommu_group_put(obj->group);
+ return err;
}
static int omap_iommu_remove(struct platform_device *pdev)
{
struct omap_iommu *obj = platform_get_drvdata(pdev);
+ iommu_group_put(obj->group);
+ obj->group = NULL;
+
+ iommu_device_sysfs_remove(&obj->iommu);
+ iommu_device_unregister(&obj->iommu);
+
omap_iommu_debugfs_remove(obj);
pm_runtime_disable(obj->dev);
@@ -1077,11 +1071,11 @@ static int
omap_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
{
struct omap_iommu_domain *omap_domain = to_omap_domain(domain);
- struct omap_iommu *oiommu;
struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
+ struct omap_iommu *oiommu;
int ret = 0;
- if (!arch_data || !arch_data->name) {
+ if (!arch_data || !arch_data->iommu_dev) {
dev_err(dev, "device doesn't have an associated iommu\n");
return -EINVAL;
}
@@ -1095,15 +1089,16 @@ omap_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
goto out;
}
+ oiommu = arch_data->iommu_dev;
+
/* get a handle to and enable the omap iommu */
- oiommu = omap_iommu_attach(arch_data->name, omap_domain->pgtable);
- if (IS_ERR(oiommu)) {
- ret = PTR_ERR(oiommu);
+ ret = omap_iommu_attach(oiommu, omap_domain->pgtable);
+ if (ret) {
dev_err(dev, "can't get omap iommu: %d\n", ret);
goto out;
}
- omap_domain->iommu_dev = arch_data->iommu_dev = oiommu;
+ omap_domain->iommu_dev = oiommu;
omap_domain->dev = dev;
oiommu->domain = domain;
@@ -1116,7 +1111,6 @@ static void _omap_iommu_detach_dev(struct omap_iommu_domain *omap_domain,
struct device *dev)
{
struct omap_iommu *oiommu = dev_to_omap_iommu(dev);
- struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
/* only a single device is supported per domain for now */
if (omap_domain->iommu_dev != oiommu) {
@@ -1128,7 +1122,7 @@ static void _omap_iommu_detach_dev(struct omap_iommu_domain *omap_domain,
omap_iommu_detach(oiommu);
- omap_domain->iommu_dev = arch_data->iommu_dev = NULL;
+ omap_domain->iommu_dev = NULL;
omap_domain->dev = NULL;
oiommu->domain = NULL;
}
@@ -1232,8 +1226,11 @@ static phys_addr_t omap_iommu_iova_to_phys(struct iommu_domain *domain,
static int omap_iommu_add_device(struct device *dev)
{
struct omap_iommu_arch_data *arch_data;
+ struct omap_iommu *oiommu;
+ struct iommu_group *group;
struct device_node *np;
struct platform_device *pdev;
+ int ret;
/*
* Allocate the archdata iommu structure for DT-based devices.
@@ -1254,15 +1251,41 @@ static int omap_iommu_add_device(struct device *dev)
return -EINVAL;
}
+ oiommu = platform_get_drvdata(pdev);
+ if (!oiommu) {
+ of_node_put(np);
+ return -EINVAL;
+ }
+
arch_data = kzalloc(sizeof(*arch_data), GFP_KERNEL);
if (!arch_data) {
of_node_put(np);
return -ENOMEM;
}
- arch_data->name = kstrdup(dev_name(&pdev->dev), GFP_KERNEL);
+ ret = iommu_device_link(&oiommu->iommu, dev);
+ if (ret) {
+ kfree(arch_data);
+ of_node_put(np);
+ return ret;
+ }
+
+ arch_data->iommu_dev = oiommu;
dev->archdata.iommu = arch_data;
+ /*
+ * IOMMU group initialization calls into omap_iommu_device_group, which
+ * needs a valid dev->archdata.iommu pointer
+ */
+ group = iommu_group_get_for_dev(dev);
+ if (IS_ERR(group)) {
+ iommu_device_unlink(&oiommu->iommu, dev);
+ dev->archdata.iommu = NULL;
+ kfree(arch_data);
+ return PTR_ERR(group);
+ }
+ iommu_group_put(group);
+
of_node_put(np);
return 0;
@@ -1275,8 +1298,23 @@ static void omap_iommu_remove_device(struct device *dev)
if (!dev->of_node || !arch_data)
return;
- kfree(arch_data->name);
+ iommu_device_unlink(&arch_data->iommu_dev->iommu, dev);
+ iommu_group_remove_device(dev);
+
+ dev->archdata.iommu = NULL;
kfree(arch_data);
+
+}
+
+static struct iommu_group *omap_iommu_device_group(struct device *dev)
+{
+ struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
+ struct iommu_group *group = NULL;
+
+ if (arch_data->iommu_dev)
+ group = arch_data->iommu_dev->group;
+
+ return group;
}
static const struct iommu_ops omap_iommu_ops = {
@@ -1290,6 +1328,7 @@ static const struct iommu_ops omap_iommu_ops = {
.iova_to_phys = omap_iommu_iova_to_phys,
.add_device = omap_iommu_add_device,
.remove_device = omap_iommu_remove_device,
+ .device_group = omap_iommu_device_group,
.pgsize_bitmap = OMAP_IOMMU_PGSIZES,
};
@@ -1299,6 +1338,7 @@ static int __init omap_iommu_init(void)
const unsigned long flags = SLAB_HWCACHE_ALIGN;
size_t align = 1 << 10; /* L2 pagetable alignement */
struct device_node *np;
+ int ret;
np = of_find_matching_node(NULL, omap_iommu_of_match);
if (!np)
@@ -1312,11 +1352,25 @@ static int __init omap_iommu_init(void)
return -ENOMEM;
iopte_cachep = p;
- bus_set_iommu(&platform_bus_type, &omap_iommu_ops);
-
omap_iommu_debugfs_init();
- return platform_driver_register(&omap_iommu_driver);
+ ret = platform_driver_register(&omap_iommu_driver);
+ if (ret) {
+ pr_err("%s: failed to register driver\n", __func__);
+ goto fail_driver;
+ }
+
+ ret = bus_set_iommu(&platform_bus_type, &omap_iommu_ops);
+ if (ret)
+ goto fail_bus;
+
+ return 0;
+
+fail_bus:
+ platform_driver_unregister(&omap_iommu_driver);
+fail_driver:
+ kmem_cache_destroy(iopte_cachep);
+ return ret;
}
subsys_initcall(omap_iommu_init);
/* must be ready before omap3isp is probed */
diff --git a/drivers/iommu/omap-iommu.h b/drivers/iommu/omap-iommu.h
index 59628e5..6e70515 100644
--- a/drivers/iommu/omap-iommu.h
+++ b/drivers/iommu/omap-iommu.h
@@ -14,6 +14,7 @@
#define _OMAP_IOMMU_H
#include <linux/bitops.h>
+#include <linux/iommu.h>
#define for_each_iotlb_cr(obj, n, __i, cr) \
for (__i = 0; \
@@ -27,6 +28,23 @@ struct iotlb_entry {
u32 endian, elsz, mixed;
};
+/**
+ * struct omap_iommu_domain - omap iommu domain
+ * @pgtable: the page table
+ * @iommu_dev: an omap iommu device attached to this domain. only a single
+ * iommu device can be attached for now.
+ * @dev: Device using this domain.
+ * @lock: domain lock, should be taken when attaching/detaching
+ * @domain: generic domain handle used by iommu core code
+ */
+struct omap_iommu_domain {
+ u32 *pgtable;
+ struct omap_iommu *iommu_dev;
+ struct device *dev;
+ spinlock_t lock;
+ struct iommu_domain domain;
+};
+
struct omap_iommu {
const char *name;
void __iomem *regbase;
@@ -50,6 +68,22 @@ struct omap_iommu {
int has_bus_err_back;
u32 id;
+
+ struct iommu_device iommu;
+ struct iommu_group *group;
+};
+
+/**
+ * struct omap_iommu_arch_data - omap iommu private data
+ * @iommu_dev: handle of the iommu device
+ *
+ * This is an omap iommu private data object, which binds an iommu user
+ * to its iommu device. This object should be placed at the iommu user's
+ * dev_archdata so generic IOMMU API can be used without having to
+ * utilize omap-specific plumbing anymore.
+ */
+struct omap_iommu_arch_data {
+ struct omap_iommu *iommu_dev;
};
struct cr_regs {
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 9afcbf7..4ba48a2 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -8,6 +8,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-iommu.h>
+#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -90,6 +91,7 @@ struct rk_iommu {
void __iomem **bases;
int num_mmu;
int irq;
+ struct iommu_device iommu;
struct list_head node; /* entry in rk_iommu_domain.iommus */
struct iommu_domain *domain; /* domain to which iommu is attached */
};
@@ -1032,6 +1034,7 @@ static int rk_iommu_group_set_iommudata(struct iommu_group *group,
static int rk_iommu_add_device(struct device *dev)
{
struct iommu_group *group;
+ struct rk_iommu *iommu;
int ret;
if (!rk_iommu_is_dev_iommu_master(dev))
@@ -1054,6 +1057,10 @@ static int rk_iommu_add_device(struct device *dev)
if (ret)
goto err_remove_device;
+ iommu = rk_iommu_from_dev(dev);
+ if (iommu)
+ iommu_device_link(&iommu->iommu, dev);
+
iommu_group_put(group);
return 0;
@@ -1067,9 +1074,15 @@ static int rk_iommu_add_device(struct device *dev)
static void rk_iommu_remove_device(struct device *dev)
{
+ struct rk_iommu *iommu;
+
if (!rk_iommu_is_dev_iommu_master(dev))
return;
+ iommu = rk_iommu_from_dev(dev);
+ if (iommu)
+ iommu_device_unlink(&iommu->iommu, dev);
+
iommu_group_remove_device(dev);
}
@@ -1117,7 +1130,7 @@ static int rk_iommu_probe(struct platform_device *pdev)
struct rk_iommu *iommu;
struct resource *res;
int num_res = pdev->num_resources;
- int i;
+ int err, i;
iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
if (!iommu)
@@ -1150,11 +1163,25 @@ static int rk_iommu_probe(struct platform_device *pdev)
return -ENXIO;
}
- return 0;
+ err = iommu_device_sysfs_add(&iommu->iommu, dev, NULL, dev_name(dev));
+ if (err)
+ return err;
+
+ iommu_device_set_ops(&iommu->iommu, &rk_iommu_ops);
+ err = iommu_device_register(&iommu->iommu);
+
+ return err;
}
static int rk_iommu_remove(struct platform_device *pdev)
{
+ struct rk_iommu *iommu = platform_get_drvdata(pdev);
+
+ if (iommu) {
+ iommu_device_sysfs_remove(&iommu->iommu);
+ iommu_device_unregister(&iommu->iommu);
+ }
+
return 0;
}
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 9305964..eeb19f5 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -15,6 +15,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/dma-mapping.h>
#include <soc/tegra/ahb.h>
#include <soc/tegra/mc.h>
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 549b315..f53c8cd 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -281,7 +281,7 @@ static void lp5521_firmware_loaded(struct lp55xx_chip *chip)
}
/*
- * Program momery sequence
+ * Program memory sequence
* 1) set engine mode to "LOAD"
* 2) write firmware data into program memory
*/
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index c5b30f0..e9ba8cd 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -387,7 +387,7 @@ static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
}
/*
- * Program momery sequence
+ * Program memory sequence
* 1) set engine mode to "LOAD"
* 2) write firmware data into program memory
*/
diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c
index b753338..9089258 100644
--- a/drivers/leds/leds-lp5562.c
+++ b/drivers/leds/leds-lp5562.c
@@ -270,7 +270,7 @@ static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
}
/*
- * Program momery sequence
+ * Program memory sequence
* 1) set engine mode to "LOAD"
* 2) write firmware data into program memory
*/
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 85e3f21..e57353e 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -767,16 +767,12 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size,
}
n = d->nr_stripes * sizeof(atomic_t);
- d->stripe_sectors_dirty = n < PAGE_SIZE << 6
- ? kzalloc(n, GFP_KERNEL)
- : vzalloc(n);
+ d->stripe_sectors_dirty = kvzalloc(n, GFP_KERNEL);
if (!d->stripe_sectors_dirty)
return -ENOMEM;
n = BITS_TO_LONGS(d->nr_stripes) * sizeof(unsigned long);
- d->full_dirty_stripes = n < PAGE_SIZE << 6
- ? kzalloc(n, GFP_KERNEL)
- : vzalloc(n);
+ d->full_dirty_stripes = kvzalloc(n, GFP_KERNEL);
if (!d->full_dirty_stripes)
return -ENOMEM;
diff --git a/drivers/md/bcache/util.h b/drivers/md/bcache/util.h
index 5d13930..cb8d2cc 100644
--- a/drivers/md/bcache/util.h
+++ b/drivers/md/bcache/util.h
@@ -43,11 +43,7 @@ struct closure;
(heap)->used = 0; \
(heap)->size = (_size); \
_bytes = (heap)->size * sizeof(*(heap)->data); \
- (heap)->data = NULL; \
- if (_bytes < KMALLOC_MAX_SIZE) \
- (heap)->data = kmalloc(_bytes, (gfp)); \
- if ((!(heap)->data) && ((gfp) & GFP_KERNEL)) \
- (heap)->data = vmalloc(_bytes); \
+ (heap)->data = kvmalloc(_bytes, (gfp) & GFP_KERNEL); \
(heap)->data; \
})
@@ -136,12 +132,8 @@ do { \
\
(fifo)->mask = _allocated_size - 1; \
(fifo)->front = (fifo)->back = 0; \
- (fifo)->data = NULL; \
\
- if (_bytes < KMALLOC_MAX_SIZE) \
- (fifo)->data = kmalloc(_bytes, (gfp)); \
- if ((!(fifo)->data) && ((gfp) & GFP_KERNEL)) \
- (fifo)->data = vmalloc(_bytes); \
+ (fifo)->data = kvmalloc(_bytes, (gfp) & GFP_KERNEL); \
(fifo)->data; \
})
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index c92c31b..5db11a4 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -406,7 +406,7 @@ static void *alloc_buffer_data(struct dm_bufio_client *c, gfp_t gfp_mask,
if (gfp_mask & __GFP_NORETRY)
noio_flag = memalloc_noio_save();
- ptr = __vmalloc(c->block_size, gfp_mask | __GFP_HIGHMEM, PAGE_KERNEL);
+ ptr = __vmalloc(c->block_size, gfp_mask, PAGE_KERNEL);
if (gfp_mask & __GFP_NORETRY)
memalloc_noio_restore(noio_flag);
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 2d5d706..0555b44 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1691,6 +1691,7 @@ static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl *param_kern
struct dm_ioctl *dmi;
int secure_data;
const size_t minimum_data_size = offsetof(struct dm_ioctl, data);
+ unsigned noio_flag;
if (copy_from_user(param_kernel, user, minimum_data_size))
return -EFAULT;
@@ -1713,15 +1714,9 @@ static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl *param_kern
* Use kmalloc() rather than vmalloc() when we can.
*/
dmi = NULL;
- if (param_kernel->data_size <= KMALLOC_MAX_SIZE)
- dmi = kmalloc(param_kernel->data_size, GFP_NOIO | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN);
-
- if (!dmi) {
- unsigned noio_flag;
- noio_flag = memalloc_noio_save();
- dmi = __vmalloc(param_kernel->data_size, GFP_NOIO | __GFP_HIGH | __GFP_HIGHMEM, PAGE_KERNEL);
- memalloc_noio_restore(noio_flag);
- }
+ noio_flag = memalloc_noio_save();
+ dmi = kvmalloc(param_kernel->data_size, GFP_KERNEL);
+ memalloc_noio_restore(noio_flag);
if (!dmi) {
if (secure_data && clear_user(user, param_kernel->data_size))
diff --git a/drivers/md/dm-stats.c b/drivers/md/dm-stats.c
index 0250e7e..6028d82 100644
--- a/drivers/md/dm-stats.c
+++ b/drivers/md/dm-stats.c
@@ -146,12 +146,7 @@ static void *dm_kvzalloc(size_t alloc_size, int node)
if (!claim_shared_memory(alloc_size))
return NULL;
- if (alloc_size <= KMALLOC_MAX_SIZE) {
- p = kzalloc_node(alloc_size, GFP_KERNEL | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN, node);
- if (p)
- return p;
- }
- p = vzalloc_node(alloc_size, node);
+ p = kvzalloc_node(alloc_size, GFP_KERNEL | __GFP_NOMEMALLOC, node);
if (p)
return p;
diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h b/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
index 354ec07..23ae724 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
+++ b/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
@@ -70,7 +70,7 @@
* (3) both long and short but short preferred and long only when necesarry
*
* These modes must be selected compile time via compile switches.
-* Compile switch settings for the diffrent modes:
+* Compile switch settings for the different modes:
* (1) DRXDAPFASI_LONG_ADDR_ALLOWED=0, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
* (2) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=0
* (3) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c
index aa44e11..853d598 100644
--- a/drivers/media/platform/mtk-vpu/mtk_vpu.c
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c
@@ -23,6 +23,7 @@
#include <linux/of_reserved_mem.h>
#include <linux/sched.h>
#include <linux/sizes.h>
+#include <linux/dma-mapping.h>
#include "mtk_vpu.h"
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 084ecf4a..0d984a2 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1943,30 +1943,13 @@ static void isp_detach_iommu(struct isp_device *isp)
{
arm_iommu_release_mapping(isp->mapping);
isp->mapping = NULL;
- iommu_group_remove_device(isp->dev);
}
static int isp_attach_iommu(struct isp_device *isp)
{
struct dma_iommu_mapping *mapping;
- struct iommu_group *group;
int ret;
- /* Create a device group and add the device to it. */
- group = iommu_group_alloc();
- if (IS_ERR(group)) {
- dev_err(isp->dev, "failed to allocate IOMMU group\n");
- return PTR_ERR(group);
- }
-
- ret = iommu_group_add_device(group, isp->dev);
- iommu_group_put(group);
-
- if (ret < 0) {
- dev_err(isp->dev, "failed to add device to IPMMU group\n");
- return ret;
- }
-
/*
* Create the ARM mapping, used by the ARM DMA mapping core to allocate
* VAs. This will allocate a corresponding IOMMU domain.
diff --git a/drivers/media/platform/omap3isp/isp.h b/drivers/media/platform/omap3isp/isp.h
index 7e6f663..2f2ae60 100644
--- a/drivers/media/platform/omap3isp/isp.h
+++ b/drivers/media/platform/omap3isp/isp.h
@@ -23,7 +23,6 @@
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/io.h>
-#include <linux/iommu.h>
#include <linux/platform_device.h>
#include <linux/wait.h>
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 39d1acb..2cba76e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -490,6 +490,13 @@
ioctl()s, the driver also provides a read/write interface to a BMC ram
region where the host LPC read/write region can be buffered.
+config PCI_ENDPOINT_TEST
+ depends on PCI
+ tristate "PCI Endpoint Test driver"
+ ---help---
+ Enable this configuration option to enable the host side test driver
+ for PCI Endpoint.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 4fb10af..81ef3e6 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -53,6 +53,7 @@
obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
obj-$(CONFIG_CXL_BASE) += cxl/
obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
+obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
lkdtm-$(CONFIG_LKDTM) += lkdtm_core.o
lkdtm-$(CONFIG_LKDTM) += lkdtm_bugs.o
diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c
index 5484301..3dc61ea 100644
--- a/drivers/misc/c2port/c2port-duramar2150.c
+++ b/drivers/misc/c2port/c2port-duramar2150.c
@@ -129,8 +129,8 @@ static int __init duramar2150_c2port_init(void)
duramar2150_c2port_dev = c2port_device_register("uc",
&duramar2150_c2port_ops, NULL);
- if (!duramar2150_c2port_dev) {
- ret = -ENODEV;
+ if (IS_ERR(duramar2150_c2port_dev)) {
+ ret = PTR_ERR(duramar2150_c2port_dev);
goto free_region;
}
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
new file mode 100644
index 0000000..09c10f4
--- /dev/null
+++ b/drivers/misc/pci_endpoint_test.c
@@ -0,0 +1,534 @@
+/**
+ * Host side test driver to test endpoint functionality
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <linux/pci_regs.h>
+
+#include <uapi/linux/pcitest.h>
+
+#define DRV_MODULE_NAME "pci-endpoint-test"
+
+#define PCI_ENDPOINT_TEST_MAGIC 0x0
+
+#define PCI_ENDPOINT_TEST_COMMAND 0x4
+#define COMMAND_RAISE_LEGACY_IRQ BIT(0)
+#define COMMAND_RAISE_MSI_IRQ BIT(1)
+#define MSI_NUMBER_SHIFT 2
+/* 6 bits for MSI number */
+#define COMMAND_READ BIT(8)
+#define COMMAND_WRITE BIT(9)
+#define COMMAND_COPY BIT(10)
+
+#define PCI_ENDPOINT_TEST_STATUS 0x8
+#define STATUS_READ_SUCCESS BIT(0)
+#define STATUS_READ_FAIL BIT(1)
+#define STATUS_WRITE_SUCCESS BIT(2)
+#define STATUS_WRITE_FAIL BIT(3)
+#define STATUS_COPY_SUCCESS BIT(4)
+#define STATUS_COPY_FAIL BIT(5)
+#define STATUS_IRQ_RAISED BIT(6)
+#define STATUS_SRC_ADDR_INVALID BIT(7)
+#define STATUS_DST_ADDR_INVALID BIT(8)
+
+#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0xc
+#define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR 0x10
+
+#define PCI_ENDPOINT_TEST_LOWER_DST_ADDR 0x14
+#define PCI_ENDPOINT_TEST_UPPER_DST_ADDR 0x18
+
+#define PCI_ENDPOINT_TEST_SIZE 0x1c
+#define PCI_ENDPOINT_TEST_CHECKSUM 0x20
+
+static DEFINE_IDA(pci_endpoint_test_ida);
+
+#define to_endpoint_test(priv) container_of((priv), struct pci_endpoint_test, \
+ miscdev)
+enum pci_barno {
+ BAR_0,
+ BAR_1,
+ BAR_2,
+ BAR_3,
+ BAR_4,
+ BAR_5,
+};
+
+struct pci_endpoint_test {
+ struct pci_dev *pdev;
+ void __iomem *base;
+ void __iomem *bar[6];
+ struct completion irq_raised;
+ int last_irq;
+ /* mutex to protect the ioctls */
+ struct mutex mutex;
+ struct miscdevice miscdev;
+};
+
+static int bar_size[] = { 4, 512, 1024, 16384, 131072, 1048576 };
+
+static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
+ u32 offset)
+{
+ return readl(test->base + offset);
+}
+
+static inline void pci_endpoint_test_writel(struct pci_endpoint_test *test,
+ u32 offset, u32 value)
+{
+ writel(value, test->base + offset);
+}
+
+static inline u32 pci_endpoint_test_bar_readl(struct pci_endpoint_test *test,
+ int bar, int offset)
+{
+ return readl(test->bar[bar] + offset);
+}
+
+static inline void pci_endpoint_test_bar_writel(struct pci_endpoint_test *test,
+ int bar, u32 offset, u32 value)
+{
+ writel(value, test->bar[bar] + offset);
+}
+
+static irqreturn_t pci_endpoint_test_irqhandler(int irq, void *dev_id)
+{
+ struct pci_endpoint_test *test = dev_id;
+ u32 reg;
+
+ reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+ if (reg & STATUS_IRQ_RAISED) {
+ test->last_irq = irq;
+ complete(&test->irq_raised);
+ reg &= ~STATUS_IRQ_RAISED;
+ }
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_STATUS,
+ reg);
+
+ return IRQ_HANDLED;
+}
+
+static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
+ enum pci_barno barno)
+{
+ int j;
+ u32 val;
+ int size;
+
+ if (!test->bar[barno])
+ return false;
+
+ size = bar_size[barno];
+
+ for (j = 0; j < size; j += 4)
+ pci_endpoint_test_bar_writel(test, barno, j, 0xA0A0A0A0);
+
+ for (j = 0; j < size; j += 4) {
+ val = pci_endpoint_test_bar_readl(test, barno, j);
+ if (val != 0xA0A0A0A0)
+ return false;
+ }
+
+ return true;
+}
+
+static bool pci_endpoint_test_legacy_irq(struct pci_endpoint_test *test)
+{
+ u32 val;
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ COMMAND_RAISE_LEGACY_IRQ);
+ val = wait_for_completion_timeout(&test->irq_raised,
+ msecs_to_jiffies(1000));
+ if (!val)
+ return false;
+
+ return true;
+}
+
+static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
+ u8 msi_num)
+{
+ u32 val;
+ struct pci_dev *pdev = test->pdev;
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ msi_num << MSI_NUMBER_SHIFT |
+ COMMAND_RAISE_MSI_IRQ);
+ val = wait_for_completion_timeout(&test->irq_raised,
+ msecs_to_jiffies(1000));
+ if (!val)
+ return false;
+
+ if (test->last_irq - pdev->irq == msi_num - 1)
+ return true;
+
+ return false;
+}
+
+static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
+{
+ bool ret = false;
+ void *src_addr;
+ void *dst_addr;
+ dma_addr_t src_phys_addr;
+ dma_addr_t dst_phys_addr;
+ struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
+ u32 src_crc32;
+ u32 dst_crc32;
+
+ src_addr = dma_alloc_coherent(dev, size, &src_phys_addr, GFP_KERNEL);
+ if (!src_addr) {
+ dev_err(dev, "failed to allocate source buffer\n");
+ ret = false;
+ goto err;
+ }
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_SRC_ADDR,
+ lower_32_bits(src_phys_addr));
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR,
+ upper_32_bits(src_phys_addr));
+
+ get_random_bytes(src_addr, size);
+ src_crc32 = crc32_le(~0, src_addr, size);
+
+ dst_addr = dma_alloc_coherent(dev, size, &dst_phys_addr, GFP_KERNEL);
+ if (!dst_addr) {
+ dev_err(dev, "failed to allocate destination address\n");
+ ret = false;
+ goto err_src_addr;
+ }
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_DST_ADDR,
+ lower_32_bits(dst_phys_addr));
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_DST_ADDR,
+ upper_32_bits(dst_phys_addr));
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE,
+ size);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ 1 << MSI_NUMBER_SHIFT | COMMAND_COPY);
+
+ wait_for_completion(&test->irq_raised);
+
+ dst_crc32 = crc32_le(~0, dst_addr, size);
+ if (dst_crc32 == src_crc32)
+ ret = true;
+
+ dma_free_coherent(dev, size, dst_addr, dst_phys_addr);
+
+err_src_addr:
+ dma_free_coherent(dev, size, src_addr, src_phys_addr);
+
+err:
+ return ret;
+}
+
+static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
+{
+ bool ret = false;
+ u32 reg;
+ void *addr;
+ dma_addr_t phys_addr;
+ struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
+ u32 crc32;
+
+ addr = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+ if (!addr) {
+ dev_err(dev, "failed to allocate address\n");
+ ret = false;
+ goto err;
+ }
+
+ get_random_bytes(addr, size);
+
+ crc32 = crc32_le(~0, addr, size);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_CHECKSUM,
+ crc32);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_SRC_ADDR,
+ lower_32_bits(phys_addr));
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR,
+ upper_32_bits(phys_addr));
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ 1 << MSI_NUMBER_SHIFT | COMMAND_READ);
+
+ wait_for_completion(&test->irq_raised);
+
+ reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+ if (reg & STATUS_READ_SUCCESS)
+ ret = true;
+
+ dma_free_coherent(dev, size, addr, phys_addr);
+
+err:
+ return ret;
+}
+
+static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
+{
+ bool ret = false;
+ void *addr;
+ dma_addr_t phys_addr;
+ struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
+ u32 crc32;
+
+ addr = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+ if (!addr) {
+ dev_err(dev, "failed to allocate destination address\n");
+ ret = false;
+ goto err;
+ }
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_DST_ADDR,
+ lower_32_bits(phys_addr));
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_DST_ADDR,
+ upper_32_bits(phys_addr));
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ 1 << MSI_NUMBER_SHIFT | COMMAND_WRITE);
+
+ wait_for_completion(&test->irq_raised);
+
+ crc32 = crc32_le(~0, addr, size);
+ if (crc32 == pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM))
+ ret = true;
+
+ dma_free_coherent(dev, size, addr, phys_addr);
+err:
+ return ret;
+}
+
+static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret = -EINVAL;
+ enum pci_barno bar;
+ struct pci_endpoint_test *test = to_endpoint_test(file->private_data);
+
+ mutex_lock(&test->mutex);
+ switch (cmd) {
+ case PCITEST_BAR:
+ bar = arg;
+ if (bar < 0 || bar > 5)
+ goto ret;
+ ret = pci_endpoint_test_bar(test, bar);
+ break;
+ case PCITEST_LEGACY_IRQ:
+ ret = pci_endpoint_test_legacy_irq(test);
+ break;
+ case PCITEST_MSI:
+ ret = pci_endpoint_test_msi_irq(test, arg);
+ break;
+ case PCITEST_WRITE:
+ ret = pci_endpoint_test_write(test, arg);
+ break;
+ case PCITEST_READ:
+ ret = pci_endpoint_test_read(test, arg);
+ break;
+ case PCITEST_COPY:
+ ret = pci_endpoint_test_copy(test, arg);
+ break;
+ }
+
+ret:
+ mutex_unlock(&test->mutex);
+ return ret;
+}
+
+static const struct file_operations pci_endpoint_test_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = pci_endpoint_test_ioctl,
+};
+
+static int pci_endpoint_test_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int i;
+ int err;
+ int irq;
+ int id;
+ char name[20];
+ enum pci_barno bar;
+ void __iomem *base;
+ struct device *dev = &pdev->dev;
+ struct pci_endpoint_test *test;
+ struct miscdevice *misc_device;
+
+ if (pci_is_bridge(pdev))
+ return -ENODEV;
+
+ test = devm_kzalloc(dev, sizeof(*test), GFP_KERNEL);
+ if (!test)
+ return -ENOMEM;
+
+ test->pdev = pdev;
+ init_completion(&test->irq_raised);
+ mutex_init(&test->mutex);
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(dev, "Cannot enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRV_MODULE_NAME);
+ if (err) {
+ dev_err(dev, "Cannot obtain PCI resources\n");
+ goto err_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+
+ irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
+ if (irq < 0)
+ dev_err(dev, "failed to get MSI interrupts\n");
+
+ err = devm_request_irq(dev, pdev->irq, pci_endpoint_test_irqhandler,
+ IRQF_SHARED, DRV_MODULE_NAME, test);
+ if (err) {
+ dev_err(dev, "failed to request IRQ %d\n", pdev->irq);
+ goto err_disable_msi;
+ }
+
+ for (i = 1; i < irq; i++) {
+ err = devm_request_irq(dev, pdev->irq + i,
+ pci_endpoint_test_irqhandler,
+ IRQF_SHARED, DRV_MODULE_NAME, test);
+ if (err)
+ dev_err(dev, "failed to request IRQ %d for MSI %d\n",
+ pdev->irq + i, i + 1);
+ }
+
+ for (bar = BAR_0; bar <= BAR_5; bar++) {
+ base = pci_ioremap_bar(pdev, bar);
+ if (!base) {
+ dev_err(dev, "failed to read BAR%d\n", bar);
+ WARN_ON(bar == BAR_0);
+ }
+ test->bar[bar] = base;
+ }
+
+ test->base = test->bar[0];
+ if (!test->base) {
+ dev_err(dev, "Cannot perform PCI test without BAR0\n");
+ goto err_iounmap;
+ }
+
+ pci_set_drvdata(pdev, test);
+
+ id = ida_simple_get(&pci_endpoint_test_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ dev_err(dev, "unable to get id\n");
+ goto err_iounmap;
+ }
+
+ snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
+ misc_device = &test->miscdev;
+ misc_device->minor = MISC_DYNAMIC_MINOR;
+ misc_device->name = name;
+ misc_device->fops = &pci_endpoint_test_fops,
+
+ err = misc_register(misc_device);
+ if (err) {
+ dev_err(dev, "failed to register device\n");
+ goto err_ida_remove;
+ }
+
+ return 0;
+
+err_ida_remove:
+ ida_simple_remove(&pci_endpoint_test_ida, id);
+
+err_iounmap:
+ for (bar = BAR_0; bar <= BAR_5; bar++) {
+ if (test->bar[bar])
+ pci_iounmap(pdev, test->bar[bar]);
+ }
+
+err_disable_msi:
+ pci_disable_msi(pdev);
+ pci_release_regions(pdev);
+
+err_disable_pdev:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void pci_endpoint_test_remove(struct pci_dev *pdev)
+{
+ int id;
+ enum pci_barno bar;
+ struct pci_endpoint_test *test = pci_get_drvdata(pdev);
+ struct miscdevice *misc_device = &test->miscdev;
+
+ if (sscanf(misc_device->name, DRV_MODULE_NAME ".%d", &id) != 1)
+ return;
+
+ misc_deregister(&test->miscdev);
+ ida_simple_remove(&pci_endpoint_test_ida, id);
+ for (bar = BAR_0; bar <= BAR_5; bar++) {
+ if (test->bar[bar])
+ pci_iounmap(pdev, test->bar[bar]);
+ }
+ pci_disable_msi(pdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static const struct pci_device_id pci_endpoint_test_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
+ { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl);
+
+static struct pci_driver pci_endpoint_test_driver = {
+ .name = DRV_MODULE_NAME,
+ .id_table = pci_endpoint_test_tbl,
+ .probe = pci_endpoint_test_probe,
+ .remove = pci_endpoint_test_remove,
+};
+module_pci_driver(pci_endpoint_test_driver);
+
+MODULE_DESCRIPTION("PCI ENDPOINT TEST HOST DRIVER");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/sram-exec.c b/drivers/misc/sram-exec.c
index ac52241..3d528a1 100644
--- a/drivers/misc/sram-exec.c
+++ b/drivers/misc/sram-exec.c
@@ -16,9 +16,10 @@
#include <linux/device.h>
#include <linux/genalloc.h>
+#include <linux/mm.h>
#include <linux/sram.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include "sram.h"
diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c
index 498c085..06c4974 100644
--- a/drivers/misc/vmw_vmci/vmci_queue_pair.c
+++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c
@@ -298,8 +298,11 @@ static void *qp_alloc_queue(u64 size, u32 flags)
size_t pas_size;
size_t vas_size;
size_t queue_size = sizeof(*queue) + sizeof(*queue->kernel_if);
- const u64 num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1;
+ u64 num_pages;
+ if (size > SIZE_MAX - PAGE_SIZE)
+ return NULL;
+ num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1;
if (num_pages >
(SIZE_MAX - queue_size) /
(sizeof(*queue->kernel_if->u.g.pas) +
@@ -624,9 +627,12 @@ static struct vmci_queue *qp_host_alloc_queue(u64 size)
{
struct vmci_queue *queue;
size_t queue_page_size;
- const u64 num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1;
+ u64 num_pages;
const size_t queue_size = sizeof(*queue) + sizeof(*(queue->kernel_if));
+ if (size > SIZE_MAX - PAGE_SIZE)
+ return NULL;
+ num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1;
if (num_pages > (SIZE_MAX - queue_size) /
sizeof(*queue->kernel_if->u.h.page))
return NULL;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index c847426..092c9bd 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -40,6 +40,7 @@
#include <linux/list.h>
#include <linux/random.h>
#include <linux/sched.h>
+#include <linux/sched/mm.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/seq_file.h>
@@ -1368,31 +1369,18 @@ static int get_pages(struct nandsim *ns, struct file *file, size_t count, loff_t
return 0;
}
-static int set_memalloc(void)
-{
- if (current->flags & PF_MEMALLOC)
- return 0;
- current->flags |= PF_MEMALLOC;
- return 1;
-}
-
-static void clear_memalloc(int memalloc)
-{
- if (memalloc)
- current->flags &= ~PF_MEMALLOC;
-}
-
static ssize_t read_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t pos)
{
ssize_t tx;
- int err, memalloc;
+ int err;
+ unsigned int noreclaim_flag;
err = get_pages(ns, file, count, pos);
if (err)
return err;
- memalloc = set_memalloc();
+ noreclaim_flag = memalloc_noreclaim_save();
tx = kernel_read(file, pos, buf, count);
- clear_memalloc(memalloc);
+ memalloc_noreclaim_restore(noreclaim_flag);
put_pages(ns);
return tx;
}
@@ -1400,14 +1388,15 @@ static ssize_t read_file(struct nandsim *ns, struct file *file, void *buf, size_
static ssize_t write_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t pos)
{
ssize_t tx;
- int err, memalloc;
+ int err;
+ unsigned int noreclaim_flag;
err = get_pages(ns, file, count, pos);
if (err)
return err;
- memalloc = set_memalloc();
+ noreclaim_flag = memalloc_noreclaim_save();
tx = kernel_write(file, buf, count, pos);
- clear_memalloc(memalloc);
+ memalloc_noreclaim_restore(noreclaim_flag);
put_pages(ns);
return tx;
}
diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c
index c502c13..47a8103 100644
--- a/drivers/net/bonding/bond_netlink.c
+++ b/drivers/net/bonding/bond_netlink.c
@@ -549,7 +549,8 @@ static int bond_fill_info(struct sk_buff *skb,
targets_added = 0;
for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) {
if (bond->params.arp_targets[i]) {
- nla_put_be32(skb, i, bond->params.arp_targets[i]);
+ if (nla_put_be32(skb, i, bond->params.arp_targets[i]))
+ goto nla_put_failure;
targets_added = 1;
}
}
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 4ef07d9..602c19e 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -413,7 +413,7 @@
/* RSCFDnRPGACCr */
#define RCANFD_C_RPGACC(r) (0x1900 + (0x04 * (r)))
-/* CAN FD mode specific regsiter map */
+/* CAN FD mode specific register map */
/* RSCFDnCFDCmXXX -> RCANFD_F_XXX(m) */
#define RCANFD_F_DCFG(m) (0x0500 + (0x20 * (m)))
diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
index f0fc4de..a19e178 100644
--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -256,6 +256,9 @@ static int dsa_loop_drv_probe(struct mdio_device *mdiodev)
return -ENOMEM;
ps = devm_kzalloc(&mdiodev->dev, sizeof(*ps), GFP_KERNEL);
+ if (!ps)
+ return -ENOMEM;
+
ps->netdev = dev_get_by_name(&init_net, pdata->netdev);
if (!ps->netdev)
return -EPROBE_DEFER;
diff --git a/drivers/net/ethernet/amd/amd8111e.h b/drivers/net/ethernet/amd/amd8111e.h
index 7cdb185..2a57b46 100644
--- a/drivers/net/ethernet/amd/amd8111e.h
+++ b/drivers/net/ethernet/amd/amd8111e.h
@@ -48,7 +48,7 @@ eg., if the value 10011010b is written into the least significant byte of a comm
/* 32 bit registers */
#define ASF_STAT 0x00 /* ASF status register */
-#define CHIPID 0x04 /* Chip ID regsiter */
+#define CHIPID 0x04 /* Chip ID register */
#define MIB_DATA 0x10 /* MIB data register */
#define MIB_ADDR 0x14 /* MIB address register */
#define STAT0 0x30 /* Status0 register */
@@ -648,7 +648,7 @@ typedef enum {
/* driver ioctl parameters */
#define AMD8111E_REG_DUMP_LEN 13*sizeof(u32)
-/* amd8111e desriptor format */
+/* amd8111e descriptor format */
struct amd8111e_tx_dr{
diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
index 796c37a..c5b8126 100644
--- a/drivers/net/ethernet/amd/atarilance.c
+++ b/drivers/net/ethernet/amd/atarilance.c
@@ -42,8 +42,8 @@
*/
-static char version[] = "atarilance.c: v1.3 04/04/96 "
- "Roman.Hodek@informatik.uni-erlangen.de\n";
+static const char version[] = "atarilance.c: v1.3 04/04/96 "
+ "Roman.Hodek@informatik.uni-erlangen.de\n";
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 6c98901..82cc813 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -72,7 +72,7 @@
#include <asm/dec/machtype.h>
#include <asm/dec/system.h>
-static char version[] =
+static const char version[] =
"declance.c: v0.011 by Linux MIPS DECstation task force\n";
MODULE_AUTHOR("Linux MIPS DECstation task force");
diff --git a/drivers/net/ethernet/amd/sun3lance.c b/drivers/net/ethernet/amd/sun3lance.c
index 12bb4f1..77b1db2 100644
--- a/drivers/net/ethernet/amd/sun3lance.c
+++ b/drivers/net/ethernet/amd/sun3lance.c
@@ -21,7 +21,8 @@
*/
-static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
+static const char version[] =
+"sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
#include <linux/module.h>
#include <linux/stddef.h>
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index cdb0299..9ee1c50 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -755,7 +755,7 @@ void aq_nic_get_stats(struct aq_nic_s *self, u64 *data)
count = 0U;
for (i = 0U, aq_vec = self->aq_vec[0];
- self->aq_vecs > i; ++i, aq_vec = self->aq_vec[i]) {
+ aq_vec && self->aq_vecs > i; ++i, aq_vec = self->aq_vec[i]) {
data += count;
aq_vec_get_sw_stats(aq_vec, data, &count);
}
@@ -959,8 +959,10 @@ void aq_nic_free_hot_resources(struct aq_nic_s *self)
goto err_exit;
for (i = AQ_DIMOF(self->aq_vec); i--;) {
- if (self->aq_vec[i])
+ if (self->aq_vec[i]) {
aq_vec_free(self->aq_vec[i]);
+ self->aq_vec[i] = NULL;
+ }
}
err_exit:;
diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index a8c2db8..567ee54 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -838,7 +838,7 @@ static int alx_enable_msix(struct alx_priv *alx)
err = pci_alloc_irq_vectors(alx->hw.pdev, num_vec, num_vec,
PCI_IRQ_MSIX);
- if (err) {
+ if (err < 0) {
netdev_warn(alx->dev, "Enabling MSI-X interrupts failed!\n");
return err;
}
@@ -904,7 +904,7 @@ static int alx_init_intr(struct alx_priv *alx)
ret = pci_alloc_irq_vectors(alx->hw.pdev, 1, 1,
PCI_IRQ_MSI | PCI_IRQ_LEGACY);
- if (ret)
+ if (ret < 0)
return ret;
alx->num_vec = 1;
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
index a8b80c5..73efdb0 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
@@ -307,7 +307,7 @@ void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel)
/*
* atl1c_read_phy_core
- * core function to read register in PHY via MDIO control regsiter.
+ * core function to read register in PHY via MDIO control register.
* ext: extension register (see IEEE 802.3)
* dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0)
* reg: reg to read
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index cea6bdc..8baf9d3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -1591,7 +1591,7 @@ static int __bnx2x_vlan_mac_execute_step(struct bnx2x *bp,
if (rc != 0) {
__bnx2x_vlan_mac_h_pend(bp, o, *ramrod_flags);
- /* Calling function should not diffrentiate between this case
+ /* Calling function should not differentiate between this case
* and the case in which there is already a pending ramrod
*/
rc = 1;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b3ba660..b56c54d 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -3000,7 +3000,8 @@ static int bnxt_alloc_ntp_fltrs(struct bnxt *bp)
INIT_HLIST_HEAD(&bp->ntp_fltr_hash_tbl[i]);
bp->ntp_fltr_count = 0;
- bp->ntp_fltr_bmap = kzalloc(BITS_TO_LONGS(BNXT_NTP_FLTR_MAX_FLTR),
+ bp->ntp_fltr_bmap = kcalloc(BITS_TO_LONGS(BNXT_NTP_FLTR_MAX_FLTR),
+ sizeof(long),
GFP_KERNEL);
if (!bp->ntp_fltr_bmap)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 0f68118..a36e386 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -2845,7 +2845,7 @@ bfa_ioc_get_adapter_optrom_ver(struct bfa_ioc *ioc, char *optrom_ver)
static void
bfa_ioc_get_adapter_manufacturer(struct bfa_ioc *ioc, char *manufacturer)
{
- memcpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
+ strncpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
}
static void
diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
index 2865939..31032de 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
@@ -547,8 +547,8 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 *string)
for (i = 0; i < BNAD_ETHTOOL_STATS_NUM; i++) {
BUG_ON(!(strlen(bnad_net_stats_strings[i]) <
ETH_GSTRING_LEN));
- memcpy(string, bnad_net_stats_strings[i],
- ETH_GSTRING_LEN);
+ strncpy(string, bnad_net_stats_strings[i],
+ ETH_GSTRING_LEN);
string += ETH_GSTRING_LEN;
}
bmap = bna_tx_rid_mask(&bnad->bna);
diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h
index 920d918..f04e81f 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h
@@ -41,9 +41,6 @@
#define VALIDATE_TID 1
-void *cxgb_alloc_mem(unsigned long size);
-void cxgb_free_mem(void *addr);
-
/*
* Map an ATID or STID to their entries in the corresponding TID tables.
*/
diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
index 76684dc..fa81445 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
@@ -1152,27 +1152,6 @@ static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new,
}
/*
- * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc.
- * The allocated memory is cleared.
- */
-void *cxgb_alloc_mem(unsigned long size)
-{
- void *p = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
-
- if (!p)
- p = vzalloc(size);
- return p;
-}
-
-/*
- * Free memory allocated through t3_alloc_mem().
- */
-void cxgb_free_mem(void *addr)
-{
- kvfree(addr);
-}
-
-/*
* Allocate and initialize the TID tables. Returns 0 on success.
*/
static int init_tid_tabs(struct tid_info *t, unsigned int ntids,
@@ -1182,7 +1161,7 @@ static int init_tid_tabs(struct tid_info *t, unsigned int ntids,
unsigned long size = ntids * sizeof(*t->tid_tab) +
natids * sizeof(*t->atid_tab) + nstids * sizeof(*t->stid_tab);
- t->tid_tab = cxgb_alloc_mem(size);
+ t->tid_tab = kvzalloc(size, GFP_KERNEL);
if (!t->tid_tab)
return -ENOMEM;
@@ -1218,7 +1197,7 @@ static int init_tid_tabs(struct tid_info *t, unsigned int ntids,
static void free_tid_maps(struct tid_info *t)
{
- cxgb_free_mem(t->tid_tab);
+ kvfree(t->tid_tab);
}
static inline void add_adapter(struct adapter *adap)
@@ -1293,7 +1272,7 @@ int cxgb3_offload_activate(struct adapter *adapter)
return 0;
out_free_l2t:
- t3_free_l2t(l2td);
+ kvfree(l2td);
out_free:
kfree(t);
return err;
@@ -1302,7 +1281,7 @@ int cxgb3_offload_activate(struct adapter *adapter)
static void clean_l2_data(struct rcu_head *head)
{
struct l2t_data *d = container_of(head, struct l2t_data, rcu_head);
- t3_free_l2t(d);
+ kvfree(d);
}
diff --git a/drivers/net/ethernet/chelsio/cxgb3/l2t.c b/drivers/net/ethernet/chelsio/cxgb3/l2t.c
index 5206358..2626412 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/l2t.c
@@ -444,7 +444,7 @@ struct l2t_data *t3_init_l2t(unsigned int l2t_capacity)
struct l2t_data *d;
int i, size = sizeof(*d) + l2t_capacity * sizeof(struct l2t_entry);
- d = cxgb_alloc_mem(size);
+ d = kvzalloc(size, GFP_KERNEL);
if (!d)
return NULL;
@@ -462,9 +462,3 @@ struct l2t_data *t3_init_l2t(unsigned int l2t_capacity)
}
return d;
}
-
-void t3_free_l2t(struct l2t_data *d)
-{
- cxgb_free_mem(d);
-}
-
diff --git a/drivers/net/ethernet/chelsio/cxgb3/l2t.h b/drivers/net/ethernet/chelsio/cxgb3/l2t.h
index 8cffcdf..c2fd323 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/l2t.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/l2t.h
@@ -115,7 +115,6 @@ int t3_l2t_send_slow(struct t3cdev *dev, struct sk_buff *skb,
struct l2t_entry *e);
void t3_l2t_send_event(struct t3cdev *dev, struct l2t_entry *e);
struct l2t_data *t3_init_l2t(unsigned int l2t_capacity);
-void t3_free_l2t(struct l2t_data *d);
int cxgb3_ofld_send(struct t3cdev *dev, struct sk_buff *skb);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/clip_tbl.c b/drivers/net/ethernet/chelsio/cxgb4/clip_tbl.c
index 7ad43af..3103ef9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/clip_tbl.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/clip_tbl.c
@@ -290,8 +290,8 @@ struct clip_tbl *t4_init_clip_tbl(unsigned int clipt_start,
if (clipt_size < CLIPT_MIN_HASH_BUCKETS)
return NULL;
- ctbl = t4_alloc_mem(sizeof(*ctbl) +
- clipt_size*sizeof(struct list_head));
+ ctbl = kvzalloc(sizeof(*ctbl) +
+ clipt_size*sizeof(struct list_head), GFP_KERNEL);
if (!ctbl)
return NULL;
@@ -305,9 +305,9 @@ struct clip_tbl *t4_init_clip_tbl(unsigned int clipt_start,
for (i = 0; i < ctbl->clipt_size; ++i)
INIT_LIST_HEAD(&ctbl->hash_list[i]);
- cl_list = t4_alloc_mem(clipt_size*sizeof(struct clip_entry));
+ cl_list = kvzalloc(clipt_size*sizeof(struct clip_entry), GFP_KERNEL);
if (!cl_list) {
- t4_free_mem(ctbl);
+ kvfree(ctbl);
return NULL;
}
ctbl->cl_list = (void *)cl_list;
@@ -326,8 +326,8 @@ void t4_cleanup_clip_tbl(struct adapter *adap)
if (ctbl) {
if (ctbl->cl_list)
- t4_free_mem(ctbl->cl_list);
- t4_free_mem(ctbl);
+ kvfree(ctbl->cl_list);
+ kvfree(ctbl);
}
}
EXPORT_SYMBOL(t4_cleanup_clip_tbl);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 163543b..e88c180 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -108,6 +108,12 @@ enum {
PAUSE_AUTONEG = 1 << 2
};
+enum {
+ FEC_AUTO = 1 << 0, /* IEEE 802.3 "automatic" */
+ FEC_RS = 1 << 1, /* Reed-Solomon */
+ FEC_BASER_RS = 1 << 2 /* BaseR/Reed-Solomon */
+};
+
struct port_stats {
u64 tx_octets; /* total # of octets in good frames */
u64 tx_frames; /* all good frames */
@@ -432,6 +438,9 @@ struct link_config {
unsigned int speed; /* actual link speed */
unsigned char requested_fc; /* flow control user has requested */
unsigned char fc; /* actual link flow control */
+ unsigned char auto_fec; /* Forward Error Correction: */
+ unsigned char requested_fec; /* "automatic" (IEEE 802.3), */
+ unsigned char fec; /* requested, and actual in use */
unsigned char autoneg; /* autonegotiating? */
unsigned char link_ok; /* link up? */
unsigned char link_down_rc; /* link down reason */
@@ -1184,8 +1193,6 @@ extern const char cxgb4_driver_version[];
void t4_os_portmod_changed(const struct adapter *adap, int port_id);
void t4_os_link_changed(struct adapter *adap, int port_id, int link_stat);
-void *t4_alloc_mem(size_t size);
-
void t4_free_sge_resources(struct adapter *adap);
void t4_free_ofld_rxqs(struct adapter *adap, int n, struct sge_ofld_rxq *q);
irq_handler_t t4_intr_handler(struct adapter *adap);
@@ -1557,7 +1564,6 @@ int t4_sched_params(struct adapter *adapter, int type, int level, int mode,
int rateunit, int ratemode, int channel, int class,
int minrate, int maxrate, int weight, int pktsize);
void t4_sge_decode_idma_state(struct adapter *adapter, int state);
-void t4_free_mem(void *addr);
void t4_idma_monitor_init(struct adapter *adapter,
struct sge_idma_monitor_state *idma);
void t4_idma_monitor(struct adapter *adapter,
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
index f6e739d..1fa34b0 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
@@ -2634,7 +2634,7 @@ static ssize_t mem_read(struct file *file, char __user *buf, size_t count,
if (count > avail - pos)
count = avail - pos;
- data = t4_alloc_mem(count);
+ data = kvzalloc(count, GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -2642,12 +2642,12 @@ static ssize_t mem_read(struct file *file, char __user *buf, size_t count,
ret = t4_memory_rw(adap, 0, mem, pos, count, data, T4_MEMORY_READ);
spin_unlock(&adap->win0_lock);
if (ret) {
- t4_free_mem(data);
+ kvfree(data);
return ret;
}
ret = copy_to_user(buf, data, count);
- t4_free_mem(data);
+ kvfree(data);
if (ret)
return -EFAULT;
@@ -2753,7 +2753,7 @@ static ssize_t blocked_fl_read(struct file *filp, char __user *ubuf,
adap->sge.egr_sz, adap->sge.blocked_fl);
len += sprintf(buf + len, "\n");
size = simple_read_from_buffer(ubuf, count, ppos, buf, len);
- t4_free_mem(buf);
+ kvfree(buf);
return size;
}
@@ -2773,7 +2773,7 @@ static ssize_t blocked_fl_write(struct file *filp, const char __user *ubuf,
return err;
bitmap_copy(adap->sge.blocked_fl, t, adap->sge.egr_sz);
- t4_free_mem(t);
+ kvfree(t);
return count;
}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 02f80fe..0ba7866 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -969,7 +969,7 @@ static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
{
int i, err = 0;
struct adapter *adapter = netdev2adap(dev);
- u8 *buf = t4_alloc_mem(EEPROMSIZE);
+ u8 *buf = kvzalloc(EEPROMSIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -980,7 +980,7 @@ static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
if (!err)
memcpy(data, buf + e->offset, e->len);
- t4_free_mem(buf);
+ kvfree(buf);
return err;
}
@@ -1009,7 +1009,7 @@ static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) {
/* RMW possibly needed for first or last words.
*/
- buf = t4_alloc_mem(aligned_len);
+ buf = kvzalloc(aligned_len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
err = eeprom_rd_phys(adapter, aligned_offset, (u32 *)buf);
@@ -1037,7 +1037,7 @@ static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
err = t4_seeprom_wp(adapter, true);
out:
if (buf != data)
- t4_free_mem(buf);
+ kvfree(buf);
return err;
}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index c12c4a3..38a5c67 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -880,27 +880,6 @@ static int setup_sge_queues(struct adapter *adap)
return err;
}
-/*
- * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc.
- * The allocated memory is cleared.
- */
-void *t4_alloc_mem(size_t size)
-{
- void *p = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
-
- if (!p)
- p = vzalloc(size);
- return p;
-}
-
-/*
- * Free memory allocated through alloc_mem().
- */
-void t4_free_mem(void *addr)
-{
- kvfree(addr);
-}
-
static u16 cxgb_select_queue(struct net_device *dev, struct sk_buff *skb,
void *accel_priv, select_queue_fallback_t fallback)
{
@@ -1299,7 +1278,7 @@ static int tid_init(struct tid_info *t)
max_ftids * sizeof(*t->ftid_tab) +
ftid_bmap_size * sizeof(long);
- t->tid_tab = t4_alloc_mem(size);
+ t->tid_tab = kvzalloc(size, GFP_KERNEL);
if (!t->tid_tab)
return -ENOMEM;
@@ -3445,7 +3424,7 @@ static int adap_init0(struct adapter *adap)
/* allocate memory to read the header of the firmware on the
* card
*/
- card_fw = t4_alloc_mem(sizeof(*card_fw));
+ card_fw = kvzalloc(sizeof(*card_fw), GFP_KERNEL);
/* Get FW from from /lib/firmware/ */
ret = request_firmware(&fw, fw_info->fw_mod_name,
@@ -3465,7 +3444,7 @@ static int adap_init0(struct adapter *adap)
/* Cleaning up */
release_firmware(fw);
- t4_free_mem(card_fw);
+ kvfree(card_fw);
if (ret < 0)
goto bye;
@@ -4470,9 +4449,9 @@ static void free_some_resources(struct adapter *adapter)
{
unsigned int i;
- t4_free_mem(adapter->l2t);
+ kvfree(adapter->l2t);
t4_cleanup_sched(adapter);
- t4_free_mem(adapter->tids.tid_tab);
+ kvfree(adapter->tids.tid_tab);
cxgb4_cleanup_tc_u32(adapter);
kfree(adapter->sge.egr_map);
kfree(adapter->sge.ingr_map);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
index a1b1942..ef06ce8 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
@@ -432,9 +432,9 @@ void cxgb4_cleanup_tc_u32(struct adapter *adap)
for (i = 0; i < t->size; i++) {
struct cxgb4_link *link = &t->table[i];
- t4_free_mem(link->tid_map);
+ kvfree(link->tid_map);
}
- t4_free_mem(adap->tc_u32);
+ kvfree(adap->tc_u32);
}
struct cxgb4_tc_u32_table *cxgb4_init_tc_u32(struct adapter *adap)
@@ -446,8 +446,8 @@ struct cxgb4_tc_u32_table *cxgb4_init_tc_u32(struct adapter *adap)
if (!max_tids)
return NULL;
- t = t4_alloc_mem(sizeof(*t) +
- (max_tids * sizeof(struct cxgb4_link)));
+ t = kvzalloc(sizeof(*t) +
+ (max_tids * sizeof(struct cxgb4_link)), GFP_KERNEL);
if (!t)
return NULL;
@@ -458,7 +458,7 @@ struct cxgb4_tc_u32_table *cxgb4_init_tc_u32(struct adapter *adap)
unsigned int bmap_size;
bmap_size = BITS_TO_LONGS(max_tids);
- link->tid_map = t4_alloc_mem(sizeof(unsigned long) * bmap_size);
+ link->tid_map = kvzalloc(sizeof(unsigned long) * bmap_size, GFP_KERNEL);
if (!link->tid_map)
goto out_no_mem;
bitmap_zero(link->tid_map, max_tids);
@@ -471,11 +471,11 @@ struct cxgb4_tc_u32_table *cxgb4_init_tc_u32(struct adapter *adap)
struct cxgb4_link *link = &t->table[i];
if (link->tid_map)
- t4_free_mem(link->tid_map);
+ kvfree(link->tid_map);
}
if (t)
- t4_free_mem(t);
+ kvfree(t);
return NULL;
}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
index 7c8c5b9..6f3692d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
@@ -646,7 +646,7 @@ struct l2t_data *t4_init_l2t(unsigned int l2t_start, unsigned int l2t_end)
if (l2t_size < L2T_MIN_HASH_BUCKETS)
return NULL;
- d = t4_alloc_mem(sizeof(*d) + l2t_size * sizeof(struct l2t_entry));
+ d = kvzalloc(sizeof(*d) + l2t_size * sizeof(struct l2t_entry), GFP_KERNEL);
if (!d)
return NULL;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sched.c b/drivers/net/ethernet/chelsio/cxgb4/sched.c
index c902635..02acff7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sched.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sched.c
@@ -177,7 +177,7 @@ static int t4_sched_queue_unbind(struct port_info *pi, struct ch_sched_queue *p)
}
list_del(&qe->list);
- t4_free_mem(qe);
+ kvfree(qe);
if (atomic_dec_and_test(&e->refcnt)) {
e->state = SCHED_STATE_UNUSED;
memset(&e->info, 0, sizeof(e->info));
@@ -201,7 +201,7 @@ static int t4_sched_queue_bind(struct port_info *pi, struct ch_sched_queue *p)
if (p->queue < 0 || p->queue >= pi->nqsets)
return -ERANGE;
- qe = t4_alloc_mem(sizeof(struct sched_queue_entry));
+ qe = kvzalloc(sizeof(struct sched_queue_entry), GFP_KERNEL);
if (!qe)
return -ENOMEM;
@@ -211,7 +211,7 @@ static int t4_sched_queue_bind(struct port_info *pi, struct ch_sched_queue *p)
/* Unbind queue from any existing class */
err = t4_sched_queue_unbind(pi, p);
if (err) {
- t4_free_mem(qe);
+ kvfree(qe);
goto out;
}
@@ -224,7 +224,7 @@ static int t4_sched_queue_bind(struct port_info *pi, struct ch_sched_queue *p)
spin_lock(&e->lock);
err = t4_sched_bind_unbind_op(pi, (void *)qe, SCHED_QUEUE, true);
if (err) {
- t4_free_mem(qe);
+ kvfree(qe);
spin_unlock(&e->lock);
goto out;
}
@@ -512,7 +512,7 @@ struct sched_table *t4_init_sched(unsigned int sched_size)
struct sched_table *s;
unsigned int i;
- s = t4_alloc_mem(sizeof(*s) + sched_size * sizeof(struct sched_class));
+ s = kvzalloc(sizeof(*s) + sched_size * sizeof(struct sched_class), GFP_KERNEL);
if (!s)
return NULL;
@@ -548,6 +548,6 @@ void t4_cleanup_sched(struct adapter *adap)
t4_sched_class_free(pi, e);
write_unlock(&s->rw_lock);
}
- t4_free_mem(s);
+ kvfree(s);
}
}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 0de8eb7..aded42b96 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3707,7 +3707,8 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
struct link_config *lc)
{
struct fw_port_cmd c;
- unsigned int fc = 0, mdi = FW_PORT_CAP_MDI_V(FW_PORT_CAP_MDI_AUTO);
+ unsigned int mdi = FW_PORT_CAP_MDI_V(FW_PORT_CAP_MDI_AUTO);
+ unsigned int fc = 0, fec = 0, fw_fec = 0;
lc->link_ok = 0;
if (lc->requested_fc & PAUSE_RX)
@@ -3715,6 +3716,13 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
if (lc->requested_fc & PAUSE_TX)
fc |= FW_PORT_CAP_FC_TX;
+ fec = lc->requested_fec & FEC_AUTO ? lc->auto_fec : lc->requested_fec;
+
+ if (fec & FEC_RS)
+ fw_fec |= FW_PORT_CAP_FEC_RS;
+ if (fec & FEC_BASER_RS)
+ fw_fec |= FW_PORT_CAP_FEC_BASER_RS;
+
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
@@ -3725,13 +3733,15 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
if (!(lc->supported & FW_PORT_CAP_ANEG)) {
c.u.l1cfg.rcap = cpu_to_be32((lc->supported & ADVERT_MASK) |
- fc);
+ fc | fw_fec);
lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
} else if (lc->autoneg == AUTONEG_DISABLE) {
- c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc | mdi);
+ c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc |
+ fw_fec | mdi);
lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
} else
- c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc | mdi);
+ c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc |
+ fw_fec | mdi);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
@@ -7407,13 +7417,26 @@ static void get_pci_mode(struct adapter *adapter, struct pci_params *p)
* Initializes the SW state maintained for each link, including the link's
* capabilities and default speed/flow-control/autonegotiation settings.
*/
-static void init_link_config(struct link_config *lc, unsigned int caps)
+static void init_link_config(struct link_config *lc, unsigned int pcaps,
+ unsigned int acaps)
{
- lc->supported = caps;
+ lc->supported = pcaps;
lc->lp_advertising = 0;
lc->requested_speed = 0;
lc->speed = 0;
lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
+ lc->auto_fec = 0;
+
+ /* For Forward Error Control, we default to whatever the Firmware
+ * tells us the Link is currently advertising.
+ */
+ if (acaps & FW_PORT_CAP_FEC_RS)
+ lc->auto_fec |= FEC_RS;
+ if (acaps & FW_PORT_CAP_FEC_BASER_RS)
+ lc->auto_fec |= FEC_BASER_RS;
+ lc->requested_fec = FEC_AUTO;
+ lc->fec = lc->auto_fec;
+
if (lc->supported & FW_PORT_CAP_ANEG) {
lc->advertising = lc->supported & ADVERT_MASK;
lc->autoneg = AUTONEG_ENABLE;
@@ -7991,7 +8014,8 @@ int t4_init_portinfo(struct port_info *pi, int mbox,
pi->port_type = FW_PORT_CMD_PTYPE_G(ret);
pi->mod_type = FW_PORT_MOD_TYPE_NA;
- init_link_config(&pi->link_cfg, be16_to_cpu(c.u.info.pcap));
+ init_link_config(&pi->link_cfg, be16_to_cpu(c.u.info.pcap),
+ be16_to_cpu(c.u.info.acap));
return 0;
}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index 8f8c079..251a35e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -2263,9 +2263,9 @@ enum fw_port_cap {
FW_PORT_CAP_ANEG = 0x0100,
FW_PORT_CAP_MDIX = 0x0200,
FW_PORT_CAP_MDIAUTO = 0x0400,
- FW_PORT_CAP_FEC = 0x0800,
- FW_PORT_CAP_TECHKR = 0x1000,
- FW_PORT_CAP_TECHKX4 = 0x2000,
+ FW_PORT_CAP_FEC_RS = 0x0800,
+ FW_PORT_CAP_FEC_BASER_RS = 0x1000,
+ FW_PORT_CAP_FEC_RESERVED = 0x2000,
FW_PORT_CAP_802_3_PAUSE = 0x4000,
FW_PORT_CAP_802_3_ASM_DIR = 0x8000,
};
diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c
index b600fbb..f910f0f 100644
--- a/drivers/net/ethernet/cirrus/mac89x0.c
+++ b/drivers/net/ethernet/cirrus/mac89x0.c
@@ -56,7 +56,7 @@
local_irq_{dis,en}able()
*/
-static char *version =
+static const char version[] =
"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
/* ======================= configure the driver here ======================= */
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
index 24dfba5..bbc0a98 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
@@ -405,7 +405,7 @@ struct mac_driver {
};
struct mac_stats_string {
- char desc[ETH_GSTRING_LEN];
+ const char desc[ETH_GSTRING_LEN];
unsigned long offset;
};
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 68812d7..413025b 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -127,7 +127,7 @@ static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
* @offset: register offset to be read
* @data: pointer to the read data
*
- * Reads the MDI control regsiter in the PHY at offset and stores the
+ * Reads the MDI control register in the PHY at offset and stores the
* information read to data.
**/
s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 22a29df..d39cba2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7332,18 +7332,6 @@ static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter)
}
#ifdef CONFIG_PCI_IOV
-static inline void ixgbe_issue_vf_flr(struct ixgbe_adapter *adapter,
- struct pci_dev *vfdev)
-{
- if (!pci_wait_for_pending_transaction(vfdev))
- e_dev_warn("Issuing VFLR with pending transactions\n");
-
- e_dev_err("Issuing VFLR for VF %s\n", pci_name(vfdev));
- pcie_capability_set_word(vfdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
-
- msleep(100);
-}
-
static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
@@ -7376,7 +7364,7 @@ static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter)
pci_read_config_word(vfdev, PCI_STATUS, &status_reg);
if (status_reg != IXGBE_FAILED_READ_CFG_WORD &&
status_reg & PCI_STATUS_REC_MASTER_ABORT)
- ixgbe_issue_vf_flr(adapter, vfdev);
+ pcie_flr(vfdev);
}
}
@@ -10602,7 +10590,7 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
* VFLR. Just clean up the AER in that case.
*/
if (vfdev) {
- ixgbe_issue_vf_flr(adapter, vfdev);
+ pcie_flr(vfdev);
/* Free device reference count */
pci_dev_put(vfdev);
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 0e0fa70..c1af47e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1789,9 +1789,17 @@ static int mlx4_master_process_vhcr(struct mlx4_dev *dev, int slave,
}
if (err) {
- if (!(dev->persist->state & MLX4_DEVICE_STATE_INTERNAL_ERROR))
- mlx4_warn(dev, "vhcr command:0x%x slave:%d failed with error:%d, status %d\n",
- vhcr->op, slave, vhcr->errno, err);
+ if (!(dev->persist->state & MLX4_DEVICE_STATE_INTERNAL_ERROR)) {
+ if (vhcr->op == MLX4_CMD_ALLOC_RES &&
+ (vhcr->in_modifier & 0xff) == RES_COUNTER &&
+ err == -EDQUOT)
+ mlx4_dbg(dev,
+ "Unable to allocate counter for slave %d (%d)\n",
+ slave, err);
+ else
+ mlx4_warn(dev, "vhcr command:0x%x slave:%d failed with error:%d, status %d\n",
+ vhcr->op, slave, vhcr->errno, err);
+ }
vhcr_cmd->status = mlx4_errno_to_status(err);
goto out_status;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index ffbcb27..ae5fdc2 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1562,6 +1562,11 @@ static int mlx4_en_flow_replace(struct net_device *dev,
qpn = priv->drop_qp.qpn;
else if (cmd->fs.ring_cookie & EN_ETHTOOL_QP_ATTACH) {
qpn = cmd->fs.ring_cookie & (EN_ETHTOOL_QP_ATTACH - 1);
+ if (qpn < priv->rss_map.base_qpn ||
+ qpn >= priv->rss_map.base_qpn + priv->rx_ring_num) {
+ en_warn(priv, "rxnfc: QP (0x%x) doesn't exist\n", qpn);
+ return -EINVAL;
+ }
} else {
if (cmd->fs.ring_cookie >= priv->rx_ring_num) {
en_warn(priv, "rxnfc: RX ring (%llu) doesn't exist\n",
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index aa074e5..77abd18 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -997,7 +997,8 @@ void mlx4_en_calc_rx_buf(struct net_device *dev)
en_dbg(DRV, priv, "Rx buffer scatter-list (effective-mtu:%d num_frags:%d):\n",
eff_mtu, priv->num_frags);
for (i = 0; i < priv->num_frags; i++) {
- en_err(priv,
+ en_dbg(DRV,
+ priv,
" frag:%d - size:%d stride:%d\n",
i,
priv->frag_info[i].frag_size,
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 3ba89bc..6ffd184 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -70,13 +70,10 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
ring->full_size = ring->size - HEADROOM - MAX_DESC_TXBBS;
tmp = size * sizeof(struct mlx4_en_tx_info);
- ring->tx_info = kmalloc_node(tmp, GFP_KERNEL | __GFP_NOWARN, node);
+ ring->tx_info = kvmalloc_node(tmp, GFP_KERNEL, node);
if (!ring->tx_info) {
- ring->tx_info = vmalloc(tmp);
- if (!ring->tx_info) {
- err = -ENOMEM;
- goto err_ring;
- }
+ err = -ENOMEM;
+ goto err_ring;
}
en_dbg(DRV, priv, "Allocated tx_info ring at addr:%p size:%d\n",
diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index db65f72..ce852ca 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -115,12 +115,9 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order)
for (i = 0; i <= buddy->max_order; ++i) {
s = BITS_TO_LONGS(1 << (buddy->max_order - i));
- buddy->bits[i] = kcalloc(s, sizeof (long), GFP_KERNEL | __GFP_NOWARN);
- if (!buddy->bits[i]) {
- buddy->bits[i] = vzalloc(s * sizeof(long));
- if (!buddy->bits[i])
- goto err_out_free;
- }
+ buddy->bits[i] = kvmalloc_array(s, sizeof(long), GFP_KERNEL | __GFP_ZERO);
+ if (!buddy->bits[i])
+ goto err_out_free;
}
set_bit(0, buddy->bits[buddy->max_order]);
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 4aa29ee..0751654 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -311,7 +311,7 @@ static inline int mlx4_grant_resource(struct mlx4_dev *dev, int slave,
struct mlx4_priv *priv = mlx4_priv(dev);
struct resource_allocator *res_alloc =
&priv->mfunc.master.res_tracker.res_alloc[res_type];
- int err = -EINVAL;
+ int err = -EDQUOT;
int allocated, free, reserved, guaranteed, from_free;
int from_rsvd;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index a84b652..fc52d74 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -35,6 +35,6 @@
config MLX5_CORE_IPOIB
bool "Mellanox Technologies ConnectX-4 IPoIB offloads support"
depends on MLX5_CORE_EN
- default y
+ default n
---help---
MLX5 IPoIB offloads & acceleration support.
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c
index 3c84e36a..019c230 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c
@@ -30,6 +30,7 @@
* SOFTWARE.
*/
+#include <rdma/ib_verbs.h>
#include <linux/mlx5/fs.h>
#include "en.h"
#include "ipoib.h"
@@ -359,10 +360,10 @@ static int mlx5i_close(struct net_device *netdev)
return 0;
}
-#ifdef notusedyet
/* IPoIB RDMA netdev callbacks */
static int mlx5i_attach_mcast(struct net_device *netdev, struct ib_device *hca,
- union ib_gid *gid, u16 lid, int set_qkey)
+ union ib_gid *gid, u16 lid, int set_qkey,
+ u32 qkey)
{
struct mlx5e_priv *epriv = mlx5i_epriv(netdev);
struct mlx5_core_dev *mdev = epriv->mdev;
@@ -375,6 +376,12 @@ static int mlx5i_attach_mcast(struct net_device *netdev, struct ib_device *hca,
mlx5_core_warn(mdev, "failed attaching QPN 0x%x, MGID %pI6\n",
ipriv->qp.qpn, gid->raw);
+ if (set_qkey) {
+ mlx5_core_dbg(mdev, "%s setting qkey 0x%x\n",
+ netdev->name, qkey);
+ ipriv->qkey = qkey;
+ }
+
return err;
}
@@ -397,15 +404,15 @@ static int mlx5i_detach_mcast(struct net_device *netdev, struct ib_device *hca,
}
static int mlx5i_xmit(struct net_device *dev, struct sk_buff *skb,
- struct ib_ah *address, u32 dqpn, u32 dqkey)
+ struct ib_ah *address, u32 dqpn)
{
struct mlx5e_priv *epriv = mlx5i_epriv(dev);
struct mlx5e_txqsq *sq = epriv->txq2sq[skb_get_queue_mapping(skb)];
struct mlx5_ib_ah *mah = to_mah(address);
+ struct mlx5i_priv *ipriv = epriv->ppriv;
- return mlx5i_sq_xmit(sq, skb, &mah->av, dqpn, dqkey);
+ return mlx5i_sq_xmit(sq, skb, &mah->av, dqpn, ipriv->qkey);
}
-#endif
static int mlx5i_check_required_hca_cap(struct mlx5_core_dev *mdev)
{
@@ -414,22 +421,23 @@ static int mlx5i_check_required_hca_cap(struct mlx5_core_dev *mdev)
if (!MLX5_CAP_GEN(mdev, ipoib_enhanced_offloads)) {
mlx5_core_warn(mdev, "IPoIB enhanced offloads are not supported\n");
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
return 0;
}
-static struct net_device *mlx5_rdma_netdev_alloc(struct mlx5_core_dev *mdev,
- struct ib_device *ibdev,
- const char *name,
- void (*setup)(struct net_device *))
+struct net_device *mlx5_rdma_netdev_alloc(struct mlx5_core_dev *mdev,
+ struct ib_device *ibdev,
+ const char *name,
+ void (*setup)(struct net_device *))
{
const struct mlx5e_profile *profile = &mlx5i_nic_profile;
int nch = profile->max_nch(mdev);
struct net_device *netdev;
struct mlx5i_priv *ipriv;
struct mlx5e_priv *epriv;
+ struct rdma_netdev *rn;
int err;
if (mlx5i_check_required_hca_cap(mdev)) {
@@ -464,13 +472,13 @@ static struct net_device *mlx5_rdma_netdev_alloc(struct mlx5_core_dev *mdev,
mlx5e_attach_netdev(epriv);
netif_carrier_off(netdev);
- /* TODO: set rdma_netdev func pointers
- * rn = &ipriv->rn;
- * rn->hca = ibdev;
- * rn->send = mlx5i_xmit;
- * rn->attach_mcast = mlx5i_attach_mcast;
- * rn->detach_mcast = mlx5i_detach_mcast;
- */
+ /* set rdma_netdev func pointers */
+ rn = &ipriv->rn;
+ rn->hca = ibdev;
+ rn->send = mlx5i_xmit;
+ rn->attach_mcast = mlx5i_attach_mcast;
+ rn->detach_mcast = mlx5i_detach_mcast;
+
return netdev;
err_free_netdev:
@@ -482,7 +490,7 @@ static struct net_device *mlx5_rdma_netdev_alloc(struct mlx5_core_dev *mdev,
}
EXPORT_SYMBOL(mlx5_rdma_netdev_alloc);
-static void mlx5_rdma_netdev_free(struct net_device *netdev)
+void mlx5_rdma_netdev_free(struct net_device *netdev)
{
struct mlx5e_priv *priv = mlx5i_epriv(netdev);
const struct mlx5e_profile *profile = priv->profile;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib.h b/drivers/net/ethernet/mellanox/mlx5/core/ipoib.h
index bae0a5c..213191a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib.h
@@ -40,7 +40,9 @@
/* ipoib rdma netdev's private data structure */
struct mlx5i_priv {
+ struct rdma_netdev rn; /* keep this first */
struct mlx5_core_qp qp;
+ u32 qkey;
char *mlx5e_priv[0];
};
diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
index 07091dd..7b0a8db 100644
--- a/drivers/net/ethernet/natsemi/sonic.h
+++ b/drivers/net/ethernet/natsemi/sonic.h
@@ -444,7 +444,7 @@ static inline __u16 sonic_rra_get(struct net_device* dev, int entry,
(entry * SIZEOF_SONIC_RR) + offset);
}
-static const char *version =
+static const char version[] =
"sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de\n";
#endif /* SONIC_H */
diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index b3aaa98..6948457 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -1460,6 +1460,7 @@ void qed_qm_init_pf(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
params.is_first_pf = p_hwfn->first_on_engine;
params.num_pf_cids = iids.cids;
params.num_vf_cids = iids.vf_cids;
+ params.num_tids = iids.tids;
params.start_pq = qm_info->start_pq;
params.num_pf_pqs = qm_info->num_pqs - qm_info->num_vf_pqs;
params.num_vf_pqs = qm_info->num_vf_pqs;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index bb70522..463927f 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1370,7 +1370,7 @@ qed_hw_init_pf_doorbell_bar(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
NULL) +
qed_cxt_get_proto_cid_count(p_hwfn, PROTOCOLID_ETH,
NULL);
- norm_regsize = roundup(QED_PF_DEMS_SIZE * non_pwm_conn, 4096);
+ norm_regsize = roundup(QED_PF_DEMS_SIZE * non_pwm_conn, PAGE_SIZE);
min_addr_reg1 = norm_regsize / 4096;
pwm_regsize = db_bar_size - norm_regsize;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index 0ed24d6..40f057e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -3058,7 +3058,7 @@ int qed_int_igu_read_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
/* There's a possibility the igu_sb_cnt_iov doesn't properly reflect
* the number of VF SBs [especially for first VF on engine, as we can't
- * diffrentiate between empty entries and its entries].
+ * differentiate between empty entries and its entries].
* Since we don't really support more SBs than VFs today, prevent any
* such configuration by sanitizing the number of SBs to equal the
* number of VFs.
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index b7ad36b..537d123 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -978,7 +978,7 @@ static int qed_slowpath_start(struct qed_dev *cdev,
if (rc)
goto err2;
- /* First Dword used to diffrentiate between various sources */
+ /* First Dword used to differentiate between various sources */
data = cdev->firmware->data + sizeof(u32);
qed_dbg_pf_init(cdev);
@@ -1093,11 +1093,13 @@ static int qed_slowpath_stop(struct qed_dev *cdev)
qed_free_stream_mem(cdev);
if (IS_QED_ETH_IF(cdev))
qed_sriov_disable(cdev, true);
-
- qed_nic_stop(cdev);
- qed_slowpath_irq_free(cdev);
}
+ qed_nic_stop(cdev);
+
+ if (IS_PF(cdev))
+ qed_slowpath_irq_free(cdev);
+
qed_disable_msix(cdev);
qed_resc_free(cdev);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index d5df29f..f5ed54d 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -625,7 +625,7 @@ int qed_iov_hw_info(struct qed_hwfn *p_hwfn)
* - If !ARI, VFs would start on next device.
* so offset - (256 - pf_id) would provide the number.
* Utilize the fact that (256 - pf_id) is achieved only by later
- * to diffrentiate between the two.
+ * to differentiate between the two.
*/
if (p_hwfn->cdev->p_iov_info->offset < (256 - p_hwfn->abs_pf_id)) {
diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index eb56520..333876c 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1028,11 +1028,6 @@ int qede_xdp(struct net_device *dev, struct netdev_xdp *xdp)
{
struct qede_dev *edev = netdev_priv(dev);
- if (IS_VF(edev)) {
- DP_NOTICE(edev, "VFs don't support XDP\n");
- return -EOPNOTSUPP;
- }
-
switch (xdp->command) {
case XDP_SETUP_PROG:
return qede_xdp_set(edev, xdp->prog);
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index b9ba23d..38b77bb 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -563,6 +563,23 @@ static const struct net_device_ops qede_netdev_ops = {
#endif
};
+static const struct net_device_ops qede_netdev_vf_ops = {
+ .ndo_open = qede_open,
+ .ndo_stop = qede_close,
+ .ndo_start_xmit = qede_start_xmit,
+ .ndo_set_rx_mode = qede_set_rx_mode,
+ .ndo_set_mac_address = qede_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = qede_change_mtu,
+ .ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid,
+ .ndo_set_features = qede_set_features,
+ .ndo_get_stats64 = qede_get_stats64,
+ .ndo_udp_tunnel_add = qede_udp_tunnel_add,
+ .ndo_udp_tunnel_del = qede_udp_tunnel_del,
+ .ndo_features_check = qede_features_check,
+};
+
/* -------------------------------------------------------------------------
* START OF PROBE / REMOVE
* -------------------------------------------------------------------------
@@ -622,7 +639,10 @@ static void qede_init_ndev(struct qede_dev *edev)
ndev->watchdog_timeo = TX_TIMEOUT;
- ndev->netdev_ops = &qede_netdev_ops;
+ if (IS_VF(edev))
+ ndev->netdev_ops = &qede_netdev_vf_ops;
+ else
+ ndev->netdev_ops = &qede_netdev_ops;
qede_set_ethtool_ops(ndev);
@@ -1313,6 +1333,9 @@ static void qede_free_mem_fp(struct qede_dev *edev, struct qede_fastpath *fp)
if (fp->type & QEDE_FASTPATH_RX)
qede_free_mem_rxq(edev, fp->rxq);
+ if (fp->type & QEDE_FASTPATH_XDP)
+ qede_free_mem_txq(edev, fp->xdp_tx);
+
if (fp->type & QEDE_FASTPATH_TX)
qede_free_mem_txq(edev, fp->txq);
}
diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
index 829be21..28ea0af 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
@@ -765,7 +765,7 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
sizeof(struct mpi_coredump_global_header);
mpi_coredump->mpi_global_header.imageSize =
sizeof(struct ql_mpi_coredump);
- memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
+ strncpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
sizeof(mpi_coredump->mpi_global_header.idString));
/* Get generic NIC reg dump */
@@ -1255,7 +1255,7 @@ static void ql_gen_reg_dump(struct ql_adapter *qdev,
sizeof(struct mpi_coredump_global_header);
mpi_coredump->mpi_global_header.imageSize =
sizeof(struct ql_reg_dump);
- memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
+ strncpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
sizeof(mpi_coredump->mpi_global_header.idString));
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index d54490d..1e59435 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -387,7 +387,7 @@ static void sxgbe_free_rx_buffers(struct net_device *dev,
/**
* init_tx_ring - init the TX descriptor ring
* @dev: net device structure
- * @tx_ring: ring to be intialised
+ * @tx_ring: ring to be initialised
* @tx_rsize: ring size
* Description: this function initializes the DMA TX descriptor
*/
@@ -437,7 +437,7 @@ static int init_tx_ring(struct device *dev, u8 queue_no,
/**
* free_rx_ring - free the RX descriptor ring
* @dev: net device structure
- * @rx_ring: ring to be intialised
+ * @rx_ring: ring to be initialised
* @rx_rsize: ring size
* Description: this function initializes the DMA RX descriptor
*/
@@ -453,7 +453,7 @@ static void free_rx_ring(struct device *dev, struct sxgbe_rx_queue *rx_ring,
/**
* init_rx_ring - init the RX descriptor ring
* @dev: net device structure
- * @rx_ring: ring to be intialised
+ * @rx_ring: ring to be initialised
* @rx_rsize: ring size
* Description: this function initializes the DMA RX descriptor
*/
@@ -539,7 +539,7 @@ static int init_rx_ring(struct net_device *dev, u8 queue_no,
/**
* free_tx_ring - free the TX descriptor ring
* @dev: net device structure
- * @tx_ring: ring to be intialised
+ * @tx_ring: ring to be initialised
* @tx_rsize: ring size
* Description: this function initializes the DMA TX descriptor
*/
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 39be967..22f9107 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -70,11 +70,8 @@ static int stmmac_pci_find_phy_addr(struct stmmac_pci_info *info)
return -ENODEV;
}
-static void stmmac_default_data(struct plat_stmmacenet_data *plat)
+static void common_default_data(struct plat_stmmacenet_data *plat)
{
- plat->bus_id = 1;
- plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_GMII;
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->has_gmac = 1;
plat->force_sf_dma_mode = 1;
@@ -82,10 +79,6 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat)
plat->mdio_bus_data->phy_reset = NULL;
plat->mdio_bus_data->phy_mask = 0;
- plat->dma_cfg->pbl = 32;
- plat->dma_cfg->pblx8 = true;
- /* TODO: AXI */
-
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
@@ -107,12 +100,29 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat)
plat->rx_queues_cfg[0].pkt_route = 0x0;
}
+static void stmmac_default_data(struct plat_stmmacenet_data *plat)
+{
+ /* Set common default data first */
+ common_default_data(plat);
+
+ plat->bus_id = 1;
+ plat->phy_addr = 0;
+ plat->interface = PHY_INTERFACE_MODE_GMII;
+
+ plat->dma_cfg->pbl = 32;
+ plat->dma_cfg->pblx8 = true;
+ /* TODO: AXI */
+}
+
static int quark_default_data(struct plat_stmmacenet_data *plat,
struct stmmac_pci_info *info)
{
struct pci_dev *pdev = info->pdev;
int ret;
+ /* Set common default data first */
+ common_default_data(plat);
+
/*
* Refuse to load the driver and register net device if MAC controller
* does not connect to any PHY interface.
@@ -124,27 +134,12 @@ static int quark_default_data(struct plat_stmmacenet_data *plat,
plat->bus_id = PCI_DEVID(pdev->bus->number, pdev->devfn);
plat->phy_addr = ret;
plat->interface = PHY_INTERFACE_MODE_RMII;
- plat->clk_csr = 2;
- plat->has_gmac = 1;
- plat->force_sf_dma_mode = 1;
-
- plat->mdio_bus_data->phy_reset = NULL;
- plat->mdio_bus_data->phy_mask = 0;
plat->dma_cfg->pbl = 16;
plat->dma_cfg->pblx8 = true;
plat->dma_cfg->fixed_burst = 1;
/* AXI (TODO) */
- /* Set default value for multicast hash bins */
- plat->multicast_filter_bins = HASH_TABLE_SIZE;
-
- /* Set default value for unicast filter entries */
- plat->unicast_filter_entries = 1;
-
- /* Set the maxmtu to a default of JUMBO_LEN */
- plat->maxmtu = JUMBO_LEN;
-
return 0;
}
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index fa674a8..f4d7aec 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -287,6 +287,10 @@ struct cpsw_ss_regs {
/* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */
#define CPSW_V1_SEQ_ID_OFS_SHIFT 16
+#define CPSW_MAX_BLKS_TX 15
+#define CPSW_MAX_BLKS_TX_SHIFT 4
+#define CPSW_MAX_BLKS_RX 5
+
struct cpsw_host_regs {
u32 max_blks;
u32 blk_cnt;
@@ -1278,11 +1282,23 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
switch (cpsw->version) {
case CPSW_VERSION_1:
slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP);
+ /* Increase RX FIFO size to 5 for supporting fullduplex
+ * flow control mode
+ */
+ slave_write(slave,
+ (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
+ CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS);
break;
case CPSW_VERSION_2:
case CPSW_VERSION_3:
case CPSW_VERSION_4:
slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP);
+ /* Increase RX FIFO size to 5 for supporting fullduplex
+ * flow control mode
+ */
+ slave_write(slave,
+ (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
+ CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS);
break;
}
diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index 3dadee1..d9db8a0 100644
--- a/drivers/net/ethernet/toshiba/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -23,7 +23,7 @@
*/
#define DRV_VERSION "1.39"
-static const char *version = "tc35815.c:v" DRV_VERSION "\n";
+static const char version[] = "tc35815.c:v" DRV_VERSION "\n";
#define MODNAME "tc35815"
#include <linux/module.h>
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index b0de8ec..f4a816c 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -228,7 +228,7 @@
#define DRV_VERSION "v1.11"
#define DRV_RELDATE "2014/07/01"
-static char version[] =
+static const char version[] =
DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
" Lawrence V. Stefani and others\n";
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index b6891ad..7a7c522 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -976,12 +976,10 @@ static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
case SIOCYAMSMCS:
if (netif_running(dev))
return -EINVAL; /* Cannot change this parameter when up */
- if ((ym = kmalloc(sizeof(struct yamdrv_ioctl_mcs), GFP_KERNEL)) == NULL)
- return -ENOBUFS;
- if (copy_from_user(ym, ifr->ifr_data, sizeof(struct yamdrv_ioctl_mcs))) {
- kfree(ym);
- return -EFAULT;
- }
+ ym = memdup_user(ifr->ifr_data,
+ sizeof(struct yamdrv_ioctl_mcs));
+ if (IS_ERR(ym))
+ return PTR_ERR(ym);
if (ym->bitrate > YAM_MAXBITRATE) {
kfree(ym);
return -EINVAL;
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index dd7fc665..1ce6239 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -60,7 +60,8 @@ MODULE_AUTHOR("Jes Sorensen <jes@wildopensource.com>");
MODULE_DESCRIPTION("Essential RoadRunner HIPPI driver");
MODULE_LICENSE("GPL");
-static char version[] = "rrunner.c: v0.50 11/11/2002 Jes Sorensen (jes@wildopensource.com)\n";
+static const char version[] =
+"rrunner.c: v0.50 11/11/2002 Jes Sorensen (jes@wildopensource.com)\n";
static const struct net_device_ops rr_netdev_ops = {
@@ -1615,17 +1616,14 @@ static int rr_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
return -EPERM;
}
- image = kmalloc(EEPROM_WORDS * sizeof(u32), GFP_KERNEL);
- oldimage = kmalloc(EEPROM_WORDS * sizeof(u32), GFP_KERNEL);
- if (!image || !oldimage) {
- error = -ENOMEM;
- goto wf_out;
- }
+ image = memdup_user(rq->ifr_data, EEPROM_BYTES);
+ if (IS_ERR(image))
+ return PTR_ERR(image);
- error = copy_from_user(image, rq->ifr_data, EEPROM_BYTES);
- if (error) {
- error = -EFAULT;
- goto wf_out;
+ oldimage = kmalloc(EEPROM_BYTES, GFP_KERNEL);
+ if (!oldimage) {
+ kfree(image);
+ return -ENOMEM;
}
if (rrpriv->fw_running){
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index 0a04125..0a5f62e 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -203,11 +203,14 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
&md->mux_handle, md, md->mii_bus);
if (rc) {
dev_info(md->dev, "mdiomux initialization failed\n");
- goto out;
+ goto out_register;
}
dev_info(md->dev, "iProc mdiomux registered\n");
return 0;
+
+out_register:
+ mdiobus_unregister(bus);
out:
mdiobus_free(bus);
return rc;
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index bb3f71f..b5cec18 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1088,6 +1088,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
u16 n = 0, index, ndplen;
u8 ready2send = 0;
u32 delayed_ndp_size;
+ size_t padding_count;
/* When our NDP gets written in cdc_ncm_ndp(), then skb_out->len gets updated
* accordingly. Otherwise, we should check here.
@@ -1244,11 +1245,13 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
* a ZLP after full sized NTBs.
*/
if (!(dev->driver_info->flags & FLAG_SEND_ZLP) &&
- skb_out->len > ctx->min_tx_pkt)
- memset(skb_put(skb_out, ctx->tx_max - skb_out->len), 0,
- ctx->tx_max - skb_out->len);
- else if (skb_out->len < ctx->tx_max && (skb_out->len % dev->maxpacket) == 0)
+ skb_out->len > ctx->min_tx_pkt) {
+ padding_count = ctx->tx_max - skb_out->len;
+ memset(skb_put(skb_out, padding_count), 0, padding_count);
+ } else if (skb_out->len < ctx->tx_max &&
+ (skb_out->len % dev->maxpacket) == 0) {
*skb_put(skb_out, 1) = 0; /* force short packet */
+ }
/* set final frame length */
nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data;
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index 649ecad..eff4f464 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -131,7 +131,7 @@ static inline int edc_inc(struct edc *edc, u16 max_err, u16 timeframe)
unsigned long now;
now = jiffies;
- if (now - edc->timestart > timeframe) {
+ if (time_after(now, edc->timestart + timeframe)) {
edc->errorcount = 1;
edc->timestart = now;
} else if (++edc->errorcount > max_err) {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 68fcbe0..b3f20b3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -522,7 +522,7 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
rxs->rs_moreaggr = (rxsp->status11 & AR_RxMoreAggr) ? 1 : 0;
rxs->rs_antenna = (MS(rxsp->status4, AR_RxAntenna) & 0x7);
rxs->enc_flags |= (rxsp->status4 & AR_GI) ? RX_ENC_FLAG_SHORT_GI : 0;
- rxs->enc_flags |= (rxsp->status4 & AR_2040) ? RX_ENC_FLAG_40MHZ : 0;
+ rxs->bw = (rxsp->status4 & AR_2040) ? RATE_INFO_BW_40 : RATE_INFO_BW_20;
rxs->evm0 = rxsp->status6;
rxs->evm1 = rxsp->status7;
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 6128c2b..77c94f9 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -580,8 +580,8 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
/* directly mapped flags for ieee80211_rx_status */
rs->enc_flags |=
(ads.ds_rxstatus3 & AR_GI) ? RX_ENC_FLAG_SHORT_GI : 0;
- rs->enc_flags |=
- (ads.ds_rxstatus3 & AR_2040) ? RX_ENC_FLAG_40MHZ : 0;
+ rs->bw = (ads.ds_rxstatus3 & AR_2040) ? RATE_INFO_BW_40 :
+ RATE_INFO_BW_20;
if (AR_SREV_9280_20_OR_LATER(ah))
rs->enc_flags |=
(ads.ds_rxstatus3 & AR_STBC) ?
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
index 5d5faa3..49a2ff1 100644
--- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
@@ -734,7 +734,9 @@ il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
if (rate_n_flags & RATE_MCS_HT_MSK)
rx_status.encoding = RX_ENC_HT;
if (rate_n_flags & RATE_MCS_HT40_MSK)
- rx_status.enc_flags |= RX_ENC_FLAG_40MHZ;
+ rx_status.bw = RATE_INFO_BW_40;
+ else
+ rx_status.bw = RATE_INFO_BW_20;
if (rate_n_flags & RATE_MCS_SGI_MSK)
rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI;
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/rx.c b/drivers/net/wireless/intel/iwlwifi/dvm/rx.c
index 1ee1ba9..adfd630 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/rx.c
@@ -889,7 +889,9 @@ static void iwlagn_rx_reply_rx(struct iwl_priv *priv,
if (rate_n_flags & RATE_MCS_HT_MSK)
rx_status.encoding = RX_ENC_HT;
if (rate_n_flags & RATE_MCS_HT40_MSK)
- rx_status.enc_flags |= RX_ENC_FLAG_40MHZ;
+ rx_status.bw = RATE_INFO_BW_40;
+ else
+ rx_status.bw = RATE_INFO_BW_20;
if (rate_n_flags & RATE_MCS_SGI_MSK)
rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI;
if (rate_n_flags & RATE_MCS_GF_MSK)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 87444af..002b25c 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1201,7 +1201,13 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
rx_status.encoding = RX_ENC_HT;
}
if (info->control.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
- rx_status.enc_flags |= RX_ENC_FLAG_40MHZ;
+ rx_status.bw = RATE_INFO_BW_40;
+ else if (info->control.rates[0].flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
+ rx_status.bw = RATE_INFO_BW_80;
+ else if (info->control.rates[0].flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
+ rx_status.bw = RATE_INFO_BW_160;
+ else
+ rx_status.bw = RATE_INFO_BW_20;
if (info->control.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)
rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI;
/* TODO: simulate real signal strength (and optional packet loss) */
diff --git a/drivers/nvdimm/dimm_devs.c b/drivers/nvdimm/dimm_devs.c
index fac1e9f..9852a33 100644
--- a/drivers/nvdimm/dimm_devs.c
+++ b/drivers/nvdimm/dimm_devs.c
@@ -106,10 +106,7 @@ int nvdimm_init_config_data(struct nvdimm_drvdata *ndd)
return -ENXIO;
}
- ndd->data = kmalloc(ndd->nsarea.config_size, GFP_KERNEL);
- if (!ndd->data)
- ndd->data = vmalloc(ndd->nsarea.config_size);
-
+ ndd->data = kvmalloc(ndd->nsarea.config_size, GFP_KERNEL);
if (!ndd->data)
return -ENOMEM;
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 56a315b..fed8032 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -132,7 +132,6 @@ static inline struct nvme_dev *to_nvme_dev(struct nvme_ctrl *ctrl)
struct nvme_queue {
struct device *q_dmadev;
struct nvme_dev *dev;
- char irqname[24]; /* nvme4294967295-65535\0 */
spinlock_t q_lock;
struct nvme_command *sq_cmds;
struct nvme_command __iomem *sq_cmds_io;
@@ -329,11 +328,6 @@ static unsigned int nvme_cmd_size(struct nvme_dev *dev)
nvme_iod_alloc_size(dev, NVME_INT_BYTES(dev), NVME_INT_PAGES);
}
-static int nvmeq_irq(struct nvme_queue *nvmeq)
-{
- return pci_irq_vector(to_pci_dev(nvmeq->dev->dev), nvmeq->cq_vector);
-}
-
static int nvme_admin_init_hctx(struct blk_mq_hw_ctx *hctx, void *data,
unsigned int hctx_idx)
{
@@ -1078,7 +1072,7 @@ static int nvme_suspend_queue(struct nvme_queue *nvmeq)
spin_unlock_irq(&nvmeq->q_lock);
return 1;
}
- vector = nvmeq_irq(nvmeq);
+ vector = nvmeq->cq_vector;
nvmeq->dev->online_queues--;
nvmeq->cq_vector = -1;
spin_unlock_irq(&nvmeq->q_lock);
@@ -1086,7 +1080,7 @@ static int nvme_suspend_queue(struct nvme_queue *nvmeq)
if (!nvmeq->qid && nvmeq->dev->ctrl.admin_q)
blk_mq_stop_hw_queues(nvmeq->dev->ctrl.admin_q);
- free_irq(vector, nvmeq);
+ pci_free_irq(to_pci_dev(nvmeq->dev->dev), vector, nvmeq);
return 0;
}
@@ -1171,8 +1165,6 @@ static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, int qid,
nvmeq->q_dmadev = dev->dev;
nvmeq->dev = dev;
- snprintf(nvmeq->irqname, sizeof(nvmeq->irqname), "nvme%dq%d",
- dev->ctrl.instance, qid);
spin_lock_init(&nvmeq->q_lock);
nvmeq->cq_head = 0;
nvmeq->cq_phase = 1;
@@ -1195,12 +1187,16 @@ static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, int qid,
static int queue_request_irq(struct nvme_queue *nvmeq)
{
- if (use_threaded_interrupts)
- return request_threaded_irq(nvmeq_irq(nvmeq), nvme_irq_check,
- nvme_irq, IRQF_SHARED, nvmeq->irqname, nvmeq);
- else
- return request_irq(nvmeq_irq(nvmeq), nvme_irq, IRQF_SHARED,
- nvmeq->irqname, nvmeq);
+ struct pci_dev *pdev = to_pci_dev(nvmeq->dev->dev);
+ int nr = nvmeq->dev->ctrl.instance;
+
+ if (use_threaded_interrupts) {
+ return pci_request_irq(pdev, nvmeq->cq_vector, nvme_irq_check,
+ nvme_irq, nvmeq, "nvme%dq%d", nr, nvmeq->qid);
+ } else {
+ return pci_request_irq(pdev, nvmeq->cq_vector, nvme_irq,
+ NULL, nvmeq, "nvme%dq%d", nr, nvmeq->qid);
+ }
}
static void nvme_init_queue(struct nvme_queue *nvmeq, u16 qid)
@@ -1557,7 +1553,7 @@ static int nvme_setup_io_queues(struct nvme_dev *dev)
}
/* Deregister the admin queue's interrupt */
- free_irq(pci_irq_vector(pdev, 0), adminq);
+ pci_free_irq(pdev, 0, adminq);
/*
* If we enable msix early due to not intx, disable it again before
diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c
index f207c3b..70bfc98 100644
--- a/drivers/nvmem/meson-efuse.c
+++ b/drivers/nvmem/meson-efuse.c
@@ -27,7 +27,7 @@ static int meson_efuse_read(void *context, unsigned int offset,
u8 *buf = val;
int ret;
- ret = meson_sm_call_read(buf, SM_EFUSE_READ, offset,
+ ret = meson_sm_call_read(buf, bytes, SM_EFUSE_READ, offset,
bytes, 0, 0, 0);
if (ret < 0)
return ret;
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 6e2f911..9416d05 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -82,7 +82,7 @@ int of_device_add(struct platform_device *ofdev)
* can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events
* to fix up DMA configuration.
*/
-void of_dma_configure(struct device *dev, struct device_node *np)
+int of_dma_configure(struct device *dev, struct device_node *np)
{
u64 dma_addr, paddr, size;
int ret;
@@ -107,7 +107,7 @@ void of_dma_configure(struct device *dev, struct device_node *np)
ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
if (ret < 0) {
dma_addr = offset = 0;
- size = dev->coherent_dma_mask + 1;
+ size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
} else {
offset = PFN_DOWN(paddr - dma_addr);
@@ -123,7 +123,7 @@ void of_dma_configure(struct device *dev, struct device_node *np)
if (!size) {
dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
- return;
+ return -EINVAL;
}
dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
}
@@ -144,13 +144,30 @@ void of_dma_configure(struct device *dev, struct device_node *np)
coherent ? " " : " not ");
iommu = of_iommu_configure(dev, np);
+ if (IS_ERR(iommu))
+ return PTR_ERR(iommu);
+
dev_dbg(dev, "device is%sbehind an iommu\n",
iommu ? " " : " not ");
arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(of_dma_configure);
+/**
+ * of_dma_deconfigure - Clean up DMA configuration
+ * @dev: Device for which to clean up DMA configuration
+ *
+ * Clean up all configuration performed by of_dma_configure_ops() and free all
+ * resources that have been allocated.
+ */
+void of_dma_deconfigure(struct device *dev)
+{
+ arch_teardown_dma_ops(dev);
+}
+
int of_device_register(struct platform_device *pdev)
{
device_initialize(&pdev->dev);
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index 0ee42c3..c9d4d3a 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -285,51 +285,6 @@ int of_pci_get_host_bridge_resources(struct device_node *dev,
EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
#endif /* CONFIG_OF_ADDRESS */
-#ifdef CONFIG_PCI_MSI
-
-static LIST_HEAD(of_pci_msi_chip_list);
-static DEFINE_MUTEX(of_pci_msi_chip_mutex);
-
-int of_pci_msi_chip_add(struct msi_controller *chip)
-{
- if (!of_property_read_bool(chip->of_node, "msi-controller"))
- return -EINVAL;
-
- mutex_lock(&of_pci_msi_chip_mutex);
- list_add(&chip->list, &of_pci_msi_chip_list);
- mutex_unlock(&of_pci_msi_chip_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(of_pci_msi_chip_add);
-
-void of_pci_msi_chip_remove(struct msi_controller *chip)
-{
- mutex_lock(&of_pci_msi_chip_mutex);
- list_del(&chip->list);
- mutex_unlock(&of_pci_msi_chip_mutex);
-}
-EXPORT_SYMBOL_GPL(of_pci_msi_chip_remove);
-
-struct msi_controller *of_pci_find_msi_chip_by_node(struct device_node *of_node)
-{
- struct msi_controller *c;
-
- mutex_lock(&of_pci_msi_chip_mutex);
- list_for_each_entry(c, &of_pci_msi_chip_list, list) {
- if (c->of_node == of_node) {
- mutex_unlock(&of_pci_msi_chip_mutex);
- return c;
- }
- }
- mutex_unlock(&of_pci_msi_chip_mutex);
-
- return NULL;
-}
-EXPORT_SYMBOL_GPL(of_pci_find_msi_chip_by_node);
-
-#endif /* CONFIG_PCI_MSI */
-
/**
* of_pci_map_rid - Translate a requester ID through a downstream mapping.
* @np: root complex device node.
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 45b413e..71fecc2 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_iommu.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
@@ -158,11 +159,6 @@ struct platform_device *of_device_alloc(struct device_node *np,
}
EXPORT_SYMBOL(of_device_alloc);
-static void of_dma_deconfigure(struct device *dev)
-{
- arch_teardown_dma_ops(dev);
-}
-
/**
* of_platform_device_create_pdata - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
@@ -191,11 +187,9 @@ static struct platform_device *of_platform_device_create_pdata(
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
- of_dma_configure(&dev->dev, dev->dev.of_node);
of_msi_configure(&dev->dev, dev->dev.of_node);
if (of_device_add(dev) != 0) {
- of_dma_deconfigure(&dev->dev);
platform_device_put(dev);
goto err_clear_flag;
}
@@ -253,7 +247,6 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
- of_dma_configure(&dev->dev, dev->dev.of_node);
/* Allow the HW Peripheral ID to be overridden */
prop = of_get_property(node, "arm,primecell-periphid", NULL);
@@ -547,7 +540,6 @@ static int of_platform_device_destroy(struct device *dev, void *data)
amba_device_unregister(to_amba_device(dev));
#endif
- of_dma_deconfigure(dev);
of_node_clear_flag(dev->of_node, OF_POPULATED);
of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
return 0;
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index df14142..e0cacb7 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -134,3 +134,5 @@
source "drivers/pci/hotplug/Kconfig"
source "drivers/pci/dwc/Kconfig"
source "drivers/pci/host/Kconfig"
+source "drivers/pci/endpoint/Kconfig"
+source "drivers/pci/switch/Kconfig"
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 8db5079..462c1f5 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -4,7 +4,7 @@
obj-y += access.o bus.o probe.o host-bridge.o remove.o pci.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
- irq.o vpd.o setup-bus.o vc.o
+ irq.o vpd.o setup-bus.o vc.o mmap.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SYSFS) += slot.o
@@ -68,3 +68,4 @@
# PCI host controller drivers
obj-y += host/
+obj-y += switch/
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 8b73827..74cf5ff 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -629,7 +629,7 @@ void pci_vpd_release(struct pci_dev *dev)
*
* When access is locked, any userspace reads or writes to config
* space and concurrent lock requests will sleep until access is
- * allowed via pci_cfg_access_unlocked again.
+ * allowed via pci_cfg_access_unlock() again.
*/
void pci_cfg_access_lock(struct pci_dev *dev)
{
@@ -700,7 +700,8 @@ static bool pcie_downstream_port(const struct pci_dev *dev)
int type = pci_pcie_type(dev);
return type == PCI_EXP_TYPE_ROOT_PORT ||
- type == PCI_EXP_TYPE_DOWNSTREAM;
+ type == PCI_EXP_TYPE_DOWNSTREAM ||
+ type == PCI_EXP_TYPE_PCIE_BRIDGE;
}
bool pcie_cap_has_lnkctl(const struct pci_dev *dev)
@@ -890,3 +891,59 @@ int pcie_capability_clear_and_set_dword(struct pci_dev *dev, int pos,
return ret;
}
EXPORT_SYMBOL(pcie_capability_clear_and_set_dword);
+
+int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
+{
+ if (pci_dev_is_disconnected(dev)) {
+ *val = ~0;
+ return -ENODEV;
+ }
+ return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_read_config_byte);
+
+int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
+{
+ if (pci_dev_is_disconnected(dev)) {
+ *val = ~0;
+ return -ENODEV;
+ }
+ return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_read_config_word);
+
+int pci_read_config_dword(const struct pci_dev *dev, int where,
+ u32 *val)
+{
+ if (pci_dev_is_disconnected(dev)) {
+ *val = ~0;
+ return -ENODEV;
+ }
+ return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_read_config_dword);
+
+int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
+{
+ if (pci_dev_is_disconnected(dev))
+ return -ENODEV;
+ return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_write_config_byte);
+
+int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
+{
+ if (pci_dev_is_disconnected(dev))
+ return -ENODEV;
+ return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_write_config_word);
+
+int pci_write_config_dword(const struct pci_dev *dev, int where,
+ u32 val)
+{
+ if (pci_dev_is_disconnected(dev))
+ return -ENODEV;
+ return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_write_config_dword);
diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index d2d2ba5..b7e1552 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -9,16 +9,44 @@
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
+config PCIE_DW_EP
+ bool
+ depends on PCI_ENDPOINT
+ select PCIE_DW
+
config PCI_DRA7XX
bool "TI DRA7xx PCIe controller"
- depends on PCI
+ depends on (PCI && PCI_MSI_IRQ_DOMAIN) || PCI_ENDPOINT
depends on OF && HAS_IOMEM && TI_PIPE3
+ help
+ Enables support for the PCIe controller in the DRA7xx SoC. There
+ are two instances of PCIe controller in DRA7xx. This controller can
+ work either as EP or RC. In order to enable host-specific features
+ PCI_DRA7XX_HOST must be selected and in order to enable device-
+ specific features PCI_DRA7XX_EP must be selected. This uses
+ the Designware core.
+
+if PCI_DRA7XX
+
+config PCI_DRA7XX_HOST
+ bool "PCI DRA7xx Host Mode"
+ depends on PCI
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW_HOST
+ default y
help
- Enables support for the PCIe controller in the DRA7xx SoC. There
- are two instances of PCIe controller in DRA7xx. This controller can
- act both as EP and RC. This reuses the Designware core.
+ Enables support for the PCIe controller in the DRA7xx SoC to work in
+ host mode.
+
+config PCI_DRA7XX_EP
+ bool "PCI DRA7xx Endpoint Mode"
+ depends on PCI_ENDPOINT
+ select PCIE_DW_EP
+ help
+ Enables support for the PCIe controller in the DRA7xx SoC to work in
+ endpoint mode.
+
+endif
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
index a2df13c..f31a859 100644
--- a/drivers/pci/dwc/Makefile
+++ b/drivers/pci/dwc/Makefile
@@ -1,7 +1,10 @@
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
+obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
-obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
+ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),)
+ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
+endif
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 0984baf..8decf46 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -10,12 +10,14 @@
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
@@ -24,6 +26,8 @@
#include <linux/pm_runtime.h>
#include <linux/resource.h>
#include <linux/types.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include "pcie-designware.h"
@@ -57,6 +61,11 @@
#define MSI BIT(4)
#define LEG_EP_INTERRUPTS (INTA | INTB | INTC | INTD)
+#define PCIECTRL_TI_CONF_DEVICE_TYPE 0x0100
+#define DEVICE_TYPE_EP 0x0
+#define DEVICE_TYPE_LEG_EP 0x1
+#define DEVICE_TYPE_RC 0x4
+
#define PCIECTRL_DRA7XX_CONF_DEVICE_CMD 0x0104
#define LTSSM_EN 0x1
@@ -66,6 +75,13 @@
#define EXP_CAP_ID_OFFSET 0x70
+#define PCIECTRL_TI_CONF_INTX_ASSERT 0x0124
+#define PCIECTRL_TI_CONF_INTX_DEASSERT 0x0128
+
+#define PCIECTRL_TI_CONF_MSI_XMT 0x012c
+#define MSI_REQ_GRANT BIT(0)
+#define MSI_VECTOR_SHIFT 7
+
struct dra7xx_pcie {
struct dw_pcie *pci;
void __iomem *base; /* DT ti_conf */
@@ -73,6 +89,11 @@ struct dra7xx_pcie {
struct phy **phy;
int link_gen;
struct irq_domain *irq_domain;
+ enum dw_pcie_device_mode mode;
+};
+
+struct dra7xx_pcie_of_data {
+ enum dw_pcie_device_mode mode;
};
#define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev)
@@ -88,6 +109,11 @@ static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset,
writel(value, pcie->base + offset);
}
+static u64 dra7xx_pcie_cpu_addr_fixup(u64 pci_addr)
+{
+ return pci_addr & DRA7XX_CPU_TO_BUS_ADDR;
+}
+
static int dra7xx_pcie_link_up(struct dw_pcie *pci)
{
struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
@@ -96,9 +122,19 @@ static int dra7xx_pcie_link_up(struct dw_pcie *pci)
return !!(reg & LINK_UP);
}
-static int dra7xx_pcie_establish_link(struct dra7xx_pcie *dra7xx)
+static void dra7xx_pcie_stop_link(struct dw_pcie *pci)
{
- struct dw_pcie *pci = dra7xx->pci;
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+ u32 reg;
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
+ reg &= ~LTSSM_EN;
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
+}
+
+static int dra7xx_pcie_establish_link(struct dw_pcie *pci)
+{
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
struct device *dev = pci->dev;
u32 reg;
u32 exp_cap_off = EXP_CAP_ID_OFFSET;
@@ -132,19 +168,31 @@ static int dra7xx_pcie_establish_link(struct dra7xx_pcie *dra7xx)
reg |= LTSSM_EN;
dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
- return dw_pcie_wait_for_link(pci);
+ return 0;
+}
+
+static void dra7xx_pcie_enable_msi_interrupts(struct dra7xx_pcie *dra7xx)
+{
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
+ ~LEG_EP_INTERRUPTS & ~MSI);
+
+ dra7xx_pcie_writel(dra7xx,
+ PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
+ MSI | LEG_EP_INTERRUPTS);
+}
+
+static void dra7xx_pcie_enable_wrapper_interrupts(struct dra7xx_pcie *dra7xx)
+{
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
+ ~INTERRUPTS);
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN,
+ INTERRUPTS);
}
static void dra7xx_pcie_enable_interrupts(struct dra7xx_pcie *dra7xx)
{
- dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
- ~INTERRUPTS);
- dra7xx_pcie_writel(dra7xx,
- PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN, INTERRUPTS);
- dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
- ~LEG_EP_INTERRUPTS & ~MSI);
- dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
- MSI | LEG_EP_INTERRUPTS);
+ dra7xx_pcie_enable_wrapper_interrupts(dra7xx);
+ dra7xx_pcie_enable_msi_interrupts(dra7xx);
}
static void dra7xx_pcie_host_init(struct pcie_port *pp)
@@ -152,14 +200,10 @@ static void dra7xx_pcie_host_init(struct pcie_port *pp)
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
- pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR;
- pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR;
- pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR;
- pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR;
-
dw_pcie_setup_rc(pp);
- dra7xx_pcie_establish_link(dra7xx);
+ dra7xx_pcie_establish_link(pci);
+ dw_pcie_wait_for_link(pci);
dw_pcie_msi_init(pp);
dra7xx_pcie_enable_interrupts(dra7xx);
}
@@ -237,6 +281,7 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
struct dra7xx_pcie *dra7xx = arg;
struct dw_pcie *pci = dra7xx->pci;
struct device *dev = pci->dev;
+ struct dw_pcie_ep *ep = &pci->ep;
u32 reg;
reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN);
@@ -273,8 +318,11 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
if (reg & LINK_REQ_RST)
dev_dbg(dev, "Link Request Reset\n");
- if (reg & LINK_UP_EVT)
+ if (reg & LINK_UP_EVT) {
+ if (dra7xx->mode == DW_PCIE_EP_TYPE)
+ dw_pcie_ep_linkup(ep);
dev_dbg(dev, "Link-up state change\n");
+ }
if (reg & CFG_BME_EVT)
dev_dbg(dev, "CFG 'Bus Master Enable' change\n");
@@ -287,6 +335,94 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
+static void dra7xx_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+
+ dra7xx_pcie_enable_wrapper_interrupts(dra7xx);
+}
+
+static void dra7xx_pcie_raise_legacy_irq(struct dra7xx_pcie *dra7xx)
+{
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_INTX_ASSERT, 0x1);
+ mdelay(1);
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_INTX_DEASSERT, 0x1);
+}
+
+static void dra7xx_pcie_raise_msi_irq(struct dra7xx_pcie *dra7xx,
+ u8 interrupt_num)
+{
+ u32 reg;
+
+ reg = (interrupt_num - 1) << MSI_VECTOR_SHIFT;
+ reg |= MSI_REQ_GRANT;
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_MSI_XMT, reg);
+}
+
+static int dra7xx_pcie_raise_irq(struct dw_pcie_ep *ep,
+ enum pci_epc_irq_type type, u8 interrupt_num)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+
+ switch (type) {
+ case PCI_EPC_IRQ_LEGACY:
+ dra7xx_pcie_raise_legacy_irq(dra7xx);
+ break;
+ case PCI_EPC_IRQ_MSI:
+ dra7xx_pcie_raise_msi_irq(dra7xx, interrupt_num);
+ break;
+ default:
+ dev_err(pci->dev, "UNKNOWN IRQ type\n");
+ }
+
+ return 0;
+}
+
+static struct dw_pcie_ep_ops pcie_ep_ops = {
+ .ep_init = dra7xx_pcie_ep_init,
+ .raise_irq = dra7xx_pcie_raise_irq,
+};
+
+static int __init dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
+ struct platform_device *pdev)
+{
+ int ret;
+ struct dw_pcie_ep *ep;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct dw_pcie *pci = dra7xx->pci;
+
+ ep = &pci->ep;
+ ep->ops = &pcie_ep_ops;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ep_dbics");
+ pci->dbi_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!pci->dbi_base)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ep_dbics2");
+ pci->dbi_base2 = devm_ioremap(dev, res->start, resource_size(res));
+ if (!pci->dbi_base2)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
+ if (!res)
+ return -EINVAL;
+
+ ep->phys_base = res->start;
+ ep->addr_size = resource_size(res);
+
+ ret = dw_pcie_ep_init(ep);
+ if (ret) {
+ dev_err(dev, "failed to initialize endpoint\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
struct platform_device *pdev)
{
@@ -329,6 +465,9 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
}
static const struct dw_pcie_ops dw_pcie_ops = {
+ .cpu_addr_fixup = dra7xx_pcie_cpu_addr_fixup,
+ .start_link = dra7xx_pcie_establish_link,
+ .stop_link = dra7xx_pcie_stop_link,
.link_up = dra7xx_pcie_link_up,
};
@@ -371,6 +510,68 @@ static int dra7xx_pcie_enable_phy(struct dra7xx_pcie *dra7xx)
return ret;
}
+static const struct dra7xx_pcie_of_data dra7xx_pcie_rc_of_data = {
+ .mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
+ .mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct of_device_id of_dra7xx_pcie_match[] = {
+ {
+ .compatible = "ti,dra7-pcie",
+ .data = &dra7xx_pcie_rc_of_data,
+ },
+ {
+ .compatible = "ti,dra7-pcie-ep",
+ .data = &dra7xx_pcie_ep_of_data,
+ },
+ {},
+};
+
+/*
+ * dra7xx_pcie_ep_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
+ * @dra7xx: the dra7xx device where the workaround should be applied
+ *
+ * Access to the PCIe slave port that are not 32-bit aligned will result
+ * in incorrect mapping to TLP Address and Byte enable fields. Therefore,
+ * byte and half-word accesses are not possible to byte offset 0x1, 0x2, or
+ * 0x3.
+ *
+ * To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
+ */
+static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
+{
+ int ret;
+ struct device_node *np = dev->of_node;
+ struct of_phandle_args args;
+ struct regmap *regmap;
+
+ regmap = syscon_regmap_lookup_by_phandle(np,
+ "ti,syscon-unaligned-access");
+ if (IS_ERR(regmap)) {
+ dev_dbg(dev, "can't get ti,syscon-unaligned-access\n");
+ return -EINVAL;
+ }
+
+ ret = of_parse_phandle_with_fixed_args(np, "ti,syscon-unaligned-access",
+ 2, 0, &args);
+ if (ret) {
+ dev_err(dev, "failed to parse ti,syscon-unaligned-access\n");
+ return ret;
+ }
+
+ ret = regmap_update_bits(regmap, args.args[0], args.args[1],
+ args.args[1]);
+ if (ret)
+ dev_err(dev, "failed to enable unaligned access\n");
+
+ of_node_put(args.np);
+
+ return ret;
+}
+
static int __init dra7xx_pcie_probe(struct platform_device *pdev)
{
u32 reg;
@@ -388,6 +589,16 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
struct device_node *np = dev->of_node;
char name[10];
struct gpio_desc *reset;
+ const struct of_device_id *match;
+ const struct dra7xx_pcie_of_data *data;
+ enum dw_pcie_device_mode mode;
+
+ match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev);
+ if (!match)
+ return -EINVAL;
+
+ data = (struct dra7xx_pcie_of_data *)match->data;
+ mode = (enum dw_pcie_device_mode)data->mode;
dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
if (!dra7xx)
@@ -409,13 +620,6 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
return -EINVAL;
}
- ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
- IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
- if (ret) {
- dev_err(dev, "failed to request irq\n");
- return ret;
- }
-
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ti_conf");
base = devm_ioremap_nocache(dev, res->start, resource_size(res));
if (!base)
@@ -473,9 +677,37 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
if (dra7xx->link_gen < 0 || dra7xx->link_gen > 2)
dra7xx->link_gen = 2;
- ret = dra7xx_add_pcie_port(dra7xx, pdev);
- if (ret < 0)
+ switch (mode) {
+ case DW_PCIE_RC_TYPE:
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
+ DEVICE_TYPE_RC);
+ ret = dra7xx_add_pcie_port(dra7xx, pdev);
+ if (ret < 0)
+ goto err_gpio;
+ break;
+ case DW_PCIE_EP_TYPE:
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
+ DEVICE_TYPE_EP);
+
+ ret = dra7xx_pcie_ep_unaligned_memaccess(dev);
+ if (ret)
+ goto err_gpio;
+
+ ret = dra7xx_add_pcie_ep(dra7xx, pdev);
+ if (ret < 0)
+ goto err_gpio;
+ break;
+ default:
+ dev_err(dev, "INVALID device type %d\n", mode);
+ }
+ dra7xx->mode = mode;
+
+ ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
+ IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
+ if (ret) {
+ dev_err(dev, "failed to request irq\n");
goto err_gpio;
+ }
return 0;
@@ -496,6 +728,9 @@ static int dra7xx_pcie_suspend(struct device *dev)
struct dw_pcie *pci = dra7xx->pci;
u32 val;
+ if (dra7xx->mode != DW_PCIE_RC_TYPE)
+ return 0;
+
/* clear MSE */
val = dw_pcie_readl_dbi(pci, PCI_COMMAND);
val &= ~PCI_COMMAND_MEMORY;
@@ -510,6 +745,9 @@ static int dra7xx_pcie_resume(struct device *dev)
struct dw_pcie *pci = dra7xx->pci;
u32 val;
+ if (dra7xx->mode != DW_PCIE_RC_TYPE)
+ return 0;
+
/* set MSE */
val = dw_pcie_readl_dbi(pci, PCI_COMMAND);
val |= PCI_COMMAND_MEMORY;
@@ -548,11 +786,6 @@ static const struct dev_pm_ops dra7xx_pcie_pm_ops = {
dra7xx_pcie_resume_noirq)
};
-static const struct of_device_id of_dra7xx_pcie_match[] = {
- { .compatible = "ti,dra7-pcie", },
- {},
-};
-
static struct platform_driver dra7xx_pcie_driver = {
.driver = {
.name = "dra7-pcie",
diff --git a/drivers/pci/dwc/pci-exynos.c b/drivers/pci/dwc/pci-exynos.c
index 44f774c..546082a 100644
--- a/drivers/pci/dwc/pci-exynos.c
+++ b/drivers/pci/dwc/pci-exynos.c
@@ -521,23 +521,25 @@ static void exynos_pcie_enable_interrupts(struct exynos_pcie *ep)
exynos_pcie_msi_init(ep);
}
-static u32 exynos_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+static u32 exynos_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
+ u32 reg, size_t size)
{
struct exynos_pcie *ep = to_exynos_pcie(pci);
u32 val;
exynos_pcie_sideband_dbi_r_mode(ep, true);
- val = readl(pci->dbi_base + reg);
+ dw_pcie_read(base + reg, size, &val);
exynos_pcie_sideband_dbi_r_mode(ep, false);
return val;
}
-static void exynos_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+static void exynos_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
+ u32 reg, size_t size, u32 val)
{
struct exynos_pcie *ep = to_exynos_pcie(pci);
exynos_pcie_sideband_dbi_w_mode(ep, true);
- writel(val, pci->dbi_base + reg);
+ dw_pcie_write(base + reg, size, val);
exynos_pcie_sideband_dbi_w_mode(ep, false);
}
@@ -644,8 +646,8 @@ static int __init exynos_add_pcie_port(struct exynos_pcie *ep,
}
static const struct dw_pcie_ops dw_pcie_ops = {
- .readl_dbi = exynos_pcie_readl_dbi,
- .writel_dbi = exynos_pcie_writel_dbi,
+ .read_dbi = exynos_pcie_read_dbi,
+ .write_dbi = exynos_pcie_write_dbi,
.link_up = exynos_pcie_link_up,
};
diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
index 801e46c..a98cba5 100644
--- a/drivers/pci/dwc/pci-imx6.c
+++ b/drivers/pci/dwc/pci-imx6.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/of_device.h>
@@ -27,6 +28,7 @@
#include <linux/signal.h>
#include <linux/types.h>
#include <linux/interrupt.h>
+#include <linux/reset.h>
#include "pcie-designware.h"
@@ -36,6 +38,7 @@ enum imx6_pcie_variants {
IMX6Q,
IMX6SX,
IMX6QP,
+ IMX7D,
};
struct imx6_pcie {
@@ -47,6 +50,8 @@ struct imx6_pcie {
struct clk *pcie_inbound_axi;
struct clk *pcie;
struct regmap *iomuxc_gpr;
+ struct reset_control *pciephy_reset;
+ struct reset_control *apps_reset;
enum imx6_pcie_variants variant;
u32 tx_deemph_gen1;
u32 tx_deemph_gen2_3p5db;
@@ -56,6 +61,11 @@ struct imx6_pcie {
int link_gen;
};
+/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
+#define PHY_PLL_LOCK_WAIT_MAX_RETRIES 2000
+#define PHY_PLL_LOCK_WAIT_USLEEP_MIN 50
+#define PHY_PLL_LOCK_WAIT_USLEEP_MAX 200
+
/* PCIe Root Complex registers (memory-mapped) */
#define PCIE_RC_LCR 0x7c
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1 0x1
@@ -248,6 +258,10 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->variant) {
+ case IMX7D:
+ reset_control_assert(imx6_pcie->pciephy_reset);
+ reset_control_assert(imx6_pcie->apps_reset);
+ break;
case IMX6SX:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
@@ -303,11 +317,32 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
break;
+ case IMX7D:
+ break;
}
return ret;
}
+static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
+{
+ u32 val;
+ unsigned int retries;
+ struct device *dev = imx6_pcie->pci->dev;
+
+ for (retries = 0; retries < PHY_PLL_LOCK_WAIT_MAX_RETRIES; retries++) {
+ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR22, &val);
+
+ if (val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED)
+ return;
+
+ usleep_range(PHY_PLL_LOCK_WAIT_USLEEP_MIN,
+ PHY_PLL_LOCK_WAIT_USLEEP_MAX);
+ }
+
+ dev_err(dev, "PCIe PLL lock timeout\n");
+}
+
static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
@@ -351,6 +386,10 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
switch (imx6_pcie->variant) {
+ case IMX7D:
+ reset_control_deassert(imx6_pcie->pciephy_reset);
+ imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
+ break;
case IMX6SX:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
@@ -377,35 +416,44 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
- if (imx6_pcie->variant == IMX6SX)
+ switch (imx6_pcie->variant) {
+ case IMX7D:
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
+ break;
+ case IMX6SX:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
IMX6SX_GPR12_PCIE_RX_EQ_2);
+ /* FALLTHROUGH */
+ default:
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
+ /* configure constant input signal to the pcie ctrl and phy */
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
- /* configure constant input signal to the pcie ctrl and phy */
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN1,
+ imx6_pcie->tx_deemph_gen1 << 0);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
+ imx6_pcie->tx_deemph_gen2_3p5db << 6);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
+ imx6_pcie->tx_deemph_gen2_6db << 12);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_SWING_FULL,
+ imx6_pcie->tx_swing_full << 18);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_SWING_LOW,
+ imx6_pcie->tx_swing_low << 25);
+ break;
+ }
+
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
-
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN1,
- imx6_pcie->tx_deemph_gen1 << 0);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
- imx6_pcie->tx_deemph_gen2_3p5db << 6);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
- imx6_pcie->tx_deemph_gen2_6db << 12);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_SWING_FULL,
- imx6_pcie->tx_swing_full << 18);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_SWING_LOW,
- imx6_pcie->tx_swing_low << 25);
}
static int imx6_pcie_wait_for_link(struct imx6_pcie *imx6_pcie)
@@ -469,8 +517,11 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
/* Start LTSSM. */
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+ if (imx6_pcie->variant == IMX7D)
+ reset_control_deassert(imx6_pcie->apps_reset);
+ else
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
ret = imx6_pcie_wait_for_link(imx6_pcie);
if (ret)
@@ -482,31 +533,42 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
+
+ /*
+ * Start Directed Speed Change so the best possible
+ * speed both link partners support can be negotiated.
+ */
+ tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+ tmp |= PORT_LOGIC_SPEED_CHANGE;
+ dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
+
+ if (imx6_pcie->variant != IMX7D) {
+ /*
+ * On i.MX7, DIRECT_SPEED_CHANGE behaves differently
+ * from i.MX6 family when no link speed transition
+ * occurs and we go Gen1 -> yep, Gen1. The difference
+ * is that, in such case, it will not be cleared by HW
+ * which will cause the following code to report false
+ * failure.
+ */
+
+ ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
+ if (ret) {
+ dev_err(dev, "Failed to bring link up!\n");
+ goto err_reset_phy;
+ }
+ }
+
+ /* Make sure link training is finished as well! */
+ ret = imx6_pcie_wait_for_link(imx6_pcie);
+ if (ret) {
+ dev_err(dev, "Failed to bring link up!\n");
+ goto err_reset_phy;
+ }
} else {
dev_info(dev, "Link: Gen2 disabled\n");
}
- /*
- * Start Directed Speed Change so the best possible speed both link
- * partners support can be negotiated.
- */
- tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
- tmp |= PORT_LOGIC_SPEED_CHANGE;
- dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
-
- ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
- if (ret) {
- dev_err(dev, "Failed to bring link up!\n");
- goto err_reset_phy;
- }
-
- /* Make sure link training is finished as well! */
- ret = imx6_pcie_wait_for_link(imx6_pcie);
- if (ret) {
- dev_err(dev, "Failed to bring link up!\n");
- goto err_reset_phy;
- }
-
tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCSR);
dev_info(dev, "Link up, Gen%i\n", (tmp >> 16) & 0xf);
return 0;
@@ -544,8 +606,8 @@ static struct dw_pcie_host_ops imx6_pcie_host_ops = {
.host_init = imx6_pcie_host_init,
};
-static int __init imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
- struct platform_device *pdev)
+static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
+ struct platform_device *pdev)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct pcie_port *pp = &pci->pp;
@@ -585,7 +647,7 @@ static const struct dw_pcie_ops dw_pcie_ops = {
.link_up = imx6_pcie_link_up,
};
-static int __init imx6_pcie_probe(struct platform_device *pdev)
+static int imx6_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct dw_pcie *pci;
@@ -609,10 +671,6 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
imx6_pcie->variant =
(enum imx6_pcie_variants)of_device_get_match_data(dev);
- /* Added for PCI abort handling */
- hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
- "imprecise external abort");
-
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
if (IS_ERR(pci->dbi_base))
@@ -632,6 +690,8 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
dev_err(dev, "unable to get reset gpio\n");
return ret;
}
+ } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
+ return imx6_pcie->reset_gpio;
}
/* Fetch clocks */
@@ -653,13 +713,31 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
return PTR_ERR(imx6_pcie->pcie);
}
- if (imx6_pcie->variant == IMX6SX) {
+ switch (imx6_pcie->variant) {
+ case IMX6SX:
imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
"pcie_inbound_axi");
if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {
dev_err(dev, "pcie_inbound_axi clock missing or invalid\n");
return PTR_ERR(imx6_pcie->pcie_inbound_axi);
}
+ break;
+ case IMX7D:
+ imx6_pcie->pciephy_reset = devm_reset_control_get(dev,
+ "pciephy");
+ if (IS_ERR(imx6_pcie->pciephy_reset)) {
+ dev_err(dev, "Failed to get PCIEPHY reset control\n");
+ return PTR_ERR(imx6_pcie->pciephy_reset);
+ }
+
+ imx6_pcie->apps_reset = devm_reset_control_get(dev, "apps");
+ if (IS_ERR(imx6_pcie->apps_reset)) {
+ dev_err(dev, "Failed to get PCIE APPS reset control\n");
+ return PTR_ERR(imx6_pcie->apps_reset);
+ }
+ break;
+ default:
+ break;
}
/* Grab GPR config register range */
@@ -718,6 +796,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx6q-pcie", .data = (void *)IMX6Q, },
{ .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, },
{ .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, },
+ { .compatible = "fsl,imx7d-pcie", .data = (void *)IMX7D, },
{},
};
@@ -725,12 +804,24 @@ static struct platform_driver imx6_pcie_driver = {
.driver = {
.name = "imx6q-pcie",
.of_match_table = imx6_pcie_of_match,
+ .suppress_bind_attrs = true,
},
+ .probe = imx6_pcie_probe,
.shutdown = imx6_pcie_shutdown,
};
static int __init imx6_pcie_init(void)
{
- return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
+ /*
+ * Since probe() can be deferred we need to make sure that
+ * hook_fault_code is not called after __init memory is freed
+ * by kernel and since imx6q_pcie_abort_handler() is a no-op,
+ * we can install the handler here without risking it
+ * accessing some uninitialized driver state.
+ */
+ hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
+ "imprecise external abort");
+
+ return platform_driver_register(&imx6_pcie_driver);
}
device_initcall(imx6_pcie_init);
diff --git a/drivers/pci/dwc/pci-keystone-dw.c b/drivers/pci/dwc/pci-keystone-dw.c
index 6b396f6..8bc626e 100644
--- a/drivers/pci/dwc/pci-keystone-dw.c
+++ b/drivers/pci/dwc/pci-keystone-dw.c
@@ -543,7 +543,7 @@ int __init ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie,
/* Index 0 is the config reg. space address */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pci->dbi_base = devm_ioremap_resource(dev, res);
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
if (IS_ERR(pci->dbi_base))
return PTR_ERR(pci->dbi_base);
diff --git a/drivers/pci/dwc/pci-layerscape.c b/drivers/pci/dwc/pci-layerscape.c
index c32e392..27d638c 100644
--- a/drivers/pci/dwc/pci-layerscape.c
+++ b/drivers/pci/dwc/pci-layerscape.c
@@ -283,7 +283,7 @@ static int __init ls_pcie_probe(struct platform_device *pdev)
pcie->pci = pci;
dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
- pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
if (IS_ERR(pci->dbi_base))
return PTR_ERR(pci->dbi_base);
@@ -305,6 +305,7 @@ static struct platform_driver ls_pcie_driver = {
.driver = {
.name = "layerscape-pcie",
.of_match_table = ls_pcie_of_match,
+ .suppress_bind_attrs = true,
},
};
builtin_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
diff --git a/drivers/pci/dwc/pcie-armada8k.c b/drivers/pci/dwc/pcie-armada8k.c
index f110e3b..495b023 100644
--- a/drivers/pci/dwc/pcie-armada8k.c
+++ b/drivers/pci/dwc/pcie-armada8k.c
@@ -230,7 +230,7 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
/* Get the dw-pcie unit configuration/control registers base. */
base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
- pci->dbi_base = devm_ioremap_resource(dev, base);
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, base);
if (IS_ERR(pci->dbi_base)) {
dev_err(dev, "couldn't remap regs base %p\n", base);
ret = PTR_ERR(pci->dbi_base);
@@ -262,6 +262,7 @@ static struct platform_driver armada8k_pcie_driver = {
.driver = {
.name = "armada8k-pcie",
.of_match_table = of_match_ptr(armada8k_pcie_of_match),
+ .suppress_bind_attrs = true,
},
};
builtin_platform_driver(armada8k_pcie_driver);
diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 6d23683..82a04ac 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -78,6 +78,11 @@ static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u
regmap_write(artpec6_pcie->regmap, offset, val);
}
+static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr)
+{
+ return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR;
+}
+
static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
{
struct dw_pcie *pci = artpec6_pcie->pci;
@@ -142,11 +147,6 @@ static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
*/
dw_pcie_writel_dbi(pci, MISC_CONTROL_1_OFF, DBI_RO_WR_EN);
- pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR;
- pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR;
- pp->cfg0_base &= ARTPEC6_CPU_TO_BUS_ADDR;
- pp->cfg1_base &= ARTPEC6_CPU_TO_BUS_ADDR;
-
/* setup root complex */
dw_pcie_setup_rc(pp);
@@ -235,6 +235,7 @@ static int artpec6_add_pcie_port(struct artpec6_pcie *artpec6_pcie,
}
static const struct dw_pcie_ops dw_pcie_ops = {
+ .cpu_addr_fixup = artpec6_pcie_cpu_addr_fixup,
};
static int artpec6_pcie_probe(struct platform_device *pdev)
@@ -294,6 +295,7 @@ static struct platform_driver artpec6_pcie_driver = {
.driver = {
.name = "artpec6-pcie",
.of_match_table = artpec6_pcie_of_match,
+ .suppress_bind_attrs = true,
},
};
builtin_platform_driver(artpec6_pcie_driver);
diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
new file mode 100644
index 0000000..3984063
--- /dev/null
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -0,0 +1,342 @@
+/**
+ * Synopsys Designware PCIe Endpoint controller driver
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/of.h>
+
+#include "pcie-designware.h"
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+
+void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
+{
+ struct pci_epc *epc = ep->epc;
+
+ pci_epc_linkup(epc);
+}
+
+static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
+{
+ u32 reg;
+
+ reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+ dw_pcie_writel_dbi2(pci, reg, 0x0);
+ dw_pcie_writel_dbi(pci, reg, 0x0);
+}
+
+static int dw_pcie_ep_write_header(struct pci_epc *epc,
+ struct pci_epf_header *hdr)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
+ dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
+ dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
+ dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
+ dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
+ hdr->subclass_code | hdr->baseclass_code << 8);
+ dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
+ hdr->cache_line_size);
+ dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
+ hdr->subsys_vendor_id);
+ dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
+ dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
+ hdr->interrupt_pin);
+
+ return 0;
+}
+
+static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
+ dma_addr_t cpu_addr,
+ enum dw_pcie_as_type as_type)
+{
+ int ret;
+ u32 free_win;
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ free_win = find_first_zero_bit(&ep->ib_window_map,
+ sizeof(ep->ib_window_map));
+ if (free_win >= ep->num_ib_windows) {
+ dev_err(pci->dev, "no free inbound window\n");
+ return -EINVAL;
+ }
+
+ ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
+ as_type);
+ if (ret < 0) {
+ dev_err(pci->dev, "Failed to program IB window\n");
+ return ret;
+ }
+
+ ep->bar_to_atu[bar] = free_win;
+ set_bit(free_win, &ep->ib_window_map);
+
+ return 0;
+}
+
+static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
+ u64 pci_addr, size_t size)
+{
+ u32 free_win;
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ free_win = find_first_zero_bit(&ep->ob_window_map,
+ sizeof(ep->ob_window_map));
+ if (free_win >= ep->num_ob_windows) {
+ dev_err(pci->dev, "no free outbound window\n");
+ return -EINVAL;
+ }
+
+ dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
+ phys_addr, pci_addr, size);
+
+ set_bit(free_win, &ep->ob_window_map);
+ ep->outbound_addr[free_win] = phys_addr;
+
+ return 0;
+}
+
+static void dw_pcie_ep_clear_bar(struct pci_epc *epc, enum pci_barno bar)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ u32 atu_index = ep->bar_to_atu[bar];
+
+ dw_pcie_ep_reset_bar(pci, bar);
+
+ dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
+ clear_bit(atu_index, &ep->ib_window_map);
+}
+
+static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
+ dma_addr_t bar_phys, size_t size, int flags)
+{
+ int ret;
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ enum dw_pcie_as_type as_type;
+ u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+
+ if (!(flags & PCI_BASE_ADDRESS_SPACE))
+ as_type = DW_PCIE_AS_MEM;
+ else
+ as_type = DW_PCIE_AS_IO;
+
+ ret = dw_pcie_ep_inbound_atu(ep, bar, bar_phys, as_type);
+ if (ret)
+ return ret;
+
+ dw_pcie_writel_dbi2(pci, reg, size - 1);
+ dw_pcie_writel_dbi(pci, reg, flags);
+
+ return 0;
+}
+
+static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr,
+ u32 *atu_index)
+{
+ u32 index;
+
+ for (index = 0; index < ep->num_ob_windows; index++) {
+ if (ep->outbound_addr[index] != addr)
+ continue;
+ *atu_index = index;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, phys_addr_t addr)
+{
+ int ret;
+ u32 atu_index;
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ ret = dw_pcie_find_index(ep, addr, &atu_index);
+ if (ret < 0)
+ return;
+
+ dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_OUTBOUND);
+ clear_bit(atu_index, &ep->ob_window_map);
+}
+
+static int dw_pcie_ep_map_addr(struct pci_epc *epc, phys_addr_t addr,
+ u64 pci_addr, size_t size)
+{
+ int ret;
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
+ if (ret) {
+ dev_err(pci->dev, "failed to enable address\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int dw_pcie_ep_get_msi(struct pci_epc *epc)
+{
+ int val;
+ u32 lower_addr;
+ u32 upper_addr;
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ val = dw_pcie_readb_dbi(pci, MSI_MESSAGE_CONTROL);
+ val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT;
+
+ lower_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_L32);
+ upper_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_U32);
+
+ if (!(lower_addr || upper_addr))
+ return -EINVAL;
+
+ return val;
+}
+
+static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 encode_int)
+{
+ int val;
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ val = (encode_int << MSI_CAP_MMC_SHIFT);
+ dw_pcie_writew_dbi(pci, MSI_MESSAGE_CONTROL, val);
+
+ return 0;
+}
+
+static int dw_pcie_ep_raise_irq(struct pci_epc *epc,
+ enum pci_epc_irq_type type, u8 interrupt_num)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+
+ if (!ep->ops->raise_irq)
+ return -EINVAL;
+
+ return ep->ops->raise_irq(ep, type, interrupt_num);
+}
+
+static void dw_pcie_ep_stop(struct pci_epc *epc)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ if (!pci->ops->stop_link)
+ return;
+
+ pci->ops->stop_link(pci);
+}
+
+static int dw_pcie_ep_start(struct pci_epc *epc)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ if (!pci->ops->start_link)
+ return -EINVAL;
+
+ return pci->ops->start_link(pci);
+}
+
+static const struct pci_epc_ops epc_ops = {
+ .write_header = dw_pcie_ep_write_header,
+ .set_bar = dw_pcie_ep_set_bar,
+ .clear_bar = dw_pcie_ep_clear_bar,
+ .map_addr = dw_pcie_ep_map_addr,
+ .unmap_addr = dw_pcie_ep_unmap_addr,
+ .set_msi = dw_pcie_ep_set_msi,
+ .get_msi = dw_pcie_ep_get_msi,
+ .raise_irq = dw_pcie_ep_raise_irq,
+ .start = dw_pcie_ep_start,
+ .stop = dw_pcie_ep_stop,
+};
+
+void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
+{
+ struct pci_epc *epc = ep->epc;
+
+ pci_epc_mem_exit(epc);
+}
+
+int dw_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+ int ret;
+ void *addr;
+ enum pci_barno bar;
+ struct pci_epc *epc;
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct device *dev = pci->dev;
+ struct device_node *np = dev->of_node;
+
+ if (!pci->dbi_base || !pci->dbi_base2) {
+ dev_err(dev, "dbi_base/deb_base2 is not populated\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
+ if (ret < 0) {
+ dev_err(dev, "unable to read *num-ib-windows* property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "num-ob-windows", &ep->num_ob_windows);
+ if (ret < 0) {
+ dev_err(dev, "unable to read *num-ob-windows* property\n");
+ return ret;
+ }
+
+ addr = devm_kzalloc(dev, sizeof(phys_addr_t) * ep->num_ob_windows,
+ GFP_KERNEL);
+ if (!addr)
+ return -ENOMEM;
+ ep->outbound_addr = addr;
+
+ for (bar = BAR_0; bar <= BAR_5; bar++)
+ dw_pcie_ep_reset_bar(pci, bar);
+
+ if (ep->ops->ep_init)
+ ep->ops->ep_init(ep);
+
+ epc = devm_pci_epc_create(dev, &epc_ops);
+ if (IS_ERR(epc)) {
+ dev_err(dev, "failed to create epc device\n");
+ return PTR_ERR(epc);
+ }
+
+ ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
+ if (ret < 0)
+ epc->max_functions = 1;
+
+ ret = pci_epc_mem_init(epc, ep->phys_base, ep->addr_size);
+ if (ret < 0) {
+ dev_err(dev, "Failed to initialize address space\n");
+ return ret;
+ }
+
+ ep->epc = epc;
+ epc_set_drvdata(epc, ep);
+ dw_pcie_setup(pci);
+
+ return 0;
+}
diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c
index 5ba3349..28ed32b 100644
--- a/drivers/pci/dwc/pcie-designware-host.c
+++ b/drivers/pci/dwc/pcie-designware-host.c
@@ -56,24 +56,25 @@ static struct irq_chip dw_msi_irq_chip = {
/* MSI int handler */
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
{
- unsigned long val;
+ u32 val;
int i, pos, irq;
irqreturn_t ret = IRQ_NONE;
for (i = 0; i < MAX_MSI_CTRLS; i++) {
dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
- (u32 *)&val);
- if (val) {
- ret = IRQ_HANDLED;
- pos = 0;
- while ((pos = find_next_bit(&val, 32, pos)) != 32) {
- irq = irq_find_mapping(pp->irq_domain,
- i * 32 + pos);
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS +
- i * 12, 4, 1 << pos);
- generic_handle_irq(irq);
- pos++;
- }
+ &val);
+ if (!val)
+ continue;
+
+ ret = IRQ_HANDLED;
+ pos = 0;
+ while ((pos = find_next_bit((unsigned long *) &val, 32,
+ pos)) != 32) {
+ irq = irq_find_mapping(pp->irq_domain, i * 32 + pos);
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12,
+ 4, 1 << pos);
+ generic_handle_irq(irq);
+ pos++;
}
}
@@ -338,8 +339,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
}
if (!pci->dbi_base) {
- pci->dbi_base = devm_ioremap(dev, pp->cfg->start,
- resource_size(pp->cfg));
+ pci->dbi_base = devm_pci_remap_cfgspace(dev,
+ pp->cfg->start,
+ resource_size(pp->cfg));
if (!pci->dbi_base) {
dev_err(dev, "error with ioremap\n");
ret = -ENOMEM;
@@ -350,8 +352,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
pp->mem_base = pp->mem->start;
if (!pp->va_cfg0_base) {
- pp->va_cfg0_base = devm_ioremap(dev, pp->cfg0_base,
- pp->cfg0_size);
+ pp->va_cfg0_base = devm_pci_remap_cfgspace(dev,
+ pp->cfg0_base, pp->cfg0_size);
if (!pp->va_cfg0_base) {
dev_err(dev, "error with ioremap in function\n");
ret = -ENOMEM;
@@ -360,7 +362,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
}
if (!pp->va_cfg1_base) {
- pp->va_cfg1_base = devm_ioremap(dev, pp->cfg1_base,
+ pp->va_cfg1_base = devm_pci_remap_cfgspace(dev,
+ pp->cfg1_base,
pp->cfg1_size);
if (!pp->va_cfg1_base) {
dev_err(dev, "error with ioremap\n");
diff --git a/drivers/pci/dwc/pcie-designware-plat.c b/drivers/pci/dwc/pcie-designware-plat.c
index f20d494..32091b3 100644
--- a/drivers/pci/dwc/pcie-designware-plat.c
+++ b/drivers/pci/dwc/pcie-designware-plat.c
@@ -133,6 +133,7 @@ static struct platform_driver dw_plat_pcie_driver = {
.driver = {
.name = "dw-pcie",
.of_match_table = dw_plat_pcie_of_match,
+ .suppress_bind_attrs = true,
},
.probe = dw_plat_pcie_probe,
};
diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
index 7e1fb7d..0e03af2 100644
--- a/drivers/pci/dwc/pcie-designware.c
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -61,91 +61,253 @@ int dw_pcie_write(void __iomem *addr, int size, u32 val)
return PCIBIOS_SUCCESSFUL;
}
-u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+ size_t size)
{
- if (pci->ops->readl_dbi)
- return pci->ops->readl_dbi(pci, reg);
+ int ret;
+ u32 val;
- return readl(pci->dbi_base + reg);
+ if (pci->ops->read_dbi)
+ return pci->ops->read_dbi(pci, base, reg, size);
+
+ ret = dw_pcie_read(base + reg, size, &val);
+ if (ret)
+ dev_err(pci->dev, "read DBI address failed\n");
+
+ return val;
}
-void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+ size_t size, u32 val)
{
- if (pci->ops->writel_dbi)
- pci->ops->writel_dbi(pci, reg, val);
- else
- writel(val, pci->dbi_base + reg);
+ int ret;
+
+ if (pci->ops->write_dbi) {
+ pci->ops->write_dbi(pci, base, reg, size, val);
+ return;
+ }
+
+ ret = dw_pcie_write(base + reg, size, val);
+ if (ret)
+ dev_err(pci->dev, "write DBI address failed\n");
}
-static u32 dw_pcie_readl_unroll(struct dw_pcie *pci, u32 index, u32 reg)
+static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
{
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
return dw_pcie_readl_dbi(pci, offset + reg);
}
-static void dw_pcie_writel_unroll(struct dw_pcie *pci, u32 index, u32 reg,
- u32 val)
+static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
+ u32 val)
{
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
dw_pcie_writel_dbi(pci, offset + reg, val);
}
+void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, int type,
+ u64 cpu_addr, u64 pci_addr, u32 size)
+{
+ u32 retries, val;
+
+ dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
+ lower_32_bits(cpu_addr));
+ dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
+ upper_32_bits(cpu_addr));
+ dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
+ lower_32_bits(cpu_addr + size - 1));
+ dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
+ lower_32_bits(pci_addr));
+ dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
+ upper_32_bits(pci_addr));
+ dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
+ type);
+ dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+ PCIE_ATU_ENABLE);
+
+ /*
+ * Make sure ATU enable takes effect before any subsequent config
+ * and I/O accesses.
+ */
+ for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+ val = dw_pcie_readl_ob_unroll(pci, index,
+ PCIE_ATU_UNR_REGION_CTRL2);
+ if (val & PCIE_ATU_ENABLE)
+ return;
+
+ usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ }
+ dev_err(pci->dev, "outbound iATU is not being enabled\n");
+}
+
void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
u64 cpu_addr, u64 pci_addr, u32 size)
{
u32 retries, val;
+ if (pci->ops->cpu_addr_fixup)
+ cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr);
+
if (pci->iatu_unroll_enabled) {
- dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
- lower_32_bits(cpu_addr));
- dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
- upper_32_bits(cpu_addr));
- dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
- lower_32_bits(cpu_addr + size - 1));
- dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
- lower_32_bits(pci_addr));
- dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
- upper_32_bits(pci_addr));
- dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
- type);
- dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
- PCIE_ATU_ENABLE);
- } else {
- dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
- PCIE_ATU_REGION_OUTBOUND | index);
- dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
- lower_32_bits(cpu_addr));
- dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
- upper_32_bits(cpu_addr));
- dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
- lower_32_bits(cpu_addr + size - 1));
- dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
- lower_32_bits(pci_addr));
- dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
- upper_32_bits(pci_addr));
- dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
- dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
+ dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
+ pci_addr, size);
+ return;
}
+ dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
+ PCIE_ATU_REGION_OUTBOUND | index);
+ dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
+ lower_32_bits(cpu_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
+ upper_32_bits(cpu_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
+ lower_32_bits(cpu_addr + size - 1));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
+ lower_32_bits(pci_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
+ upper_32_bits(pci_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
+ dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
+
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
- if (pci->iatu_unroll_enabled)
- val = dw_pcie_readl_unroll(pci, index,
- PCIE_ATU_UNR_REGION_CTRL2);
- else
- val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
-
+ val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
if (val == PCIE_ATU_ENABLE)
return;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
- dev_err(pci->dev, "iATU is not being enabled\n");
+ dev_err(pci->dev, "outbound iATU is not being enabled\n");
+}
+
+static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
+{
+ u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
+
+ return dw_pcie_readl_dbi(pci, offset + reg);
+}
+
+static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
+ u32 val)
+{
+ u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
+
+ dw_pcie_writel_dbi(pci, offset + reg, val);
+}
+
+int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index, int bar,
+ u64 cpu_addr, enum dw_pcie_as_type as_type)
+{
+ int type;
+ u32 retries, val;
+
+ dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
+ lower_32_bits(cpu_addr));
+ dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
+ upper_32_bits(cpu_addr));
+
+ switch (as_type) {
+ case DW_PCIE_AS_MEM:
+ type = PCIE_ATU_TYPE_MEM;
+ break;
+ case DW_PCIE_AS_IO:
+ type = PCIE_ATU_TYPE_IO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type);
+ dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+ PCIE_ATU_ENABLE |
+ PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
+
+ /*
+ * Make sure ATU enable takes effect before any subsequent config
+ * and I/O accesses.
+ */
+ for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+ val = dw_pcie_readl_ib_unroll(pci, index,
+ PCIE_ATU_UNR_REGION_CTRL2);
+ if (val & PCIE_ATU_ENABLE)
+ return 0;
+
+ usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ }
+ dev_err(pci->dev, "inbound iATU is not being enabled\n");
+
+ return -EBUSY;
+}
+
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
+ u64 cpu_addr, enum dw_pcie_as_type as_type)
+{
+ int type;
+ u32 retries, val;
+
+ if (pci->iatu_unroll_enabled)
+ return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
+ cpu_addr, as_type);
+
+ dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
+ index);
+ dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr));
+
+ switch (as_type) {
+ case DW_PCIE_AS_MEM:
+ type = PCIE_ATU_TYPE_MEM;
+ break;
+ case DW_PCIE_AS_IO:
+ type = PCIE_ATU_TYPE_IO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
+ dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
+ | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
+
+ /*
+ * Make sure ATU enable takes effect before any subsequent config
+ * and I/O accesses.
+ */
+ for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+ val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
+ if (val & PCIE_ATU_ENABLE)
+ return 0;
+
+ usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ }
+ dev_err(pci->dev, "inbound iATU is not being enabled\n");
+
+ return -EBUSY;
+}
+
+void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
+ enum dw_pcie_region_type type)
+{
+ int region;
+
+ switch (type) {
+ case DW_PCIE_REGION_INBOUND:
+ region = PCIE_ATU_REGION_INBOUND;
+ break;
+ case DW_PCIE_REGION_OUTBOUND:
+ region = PCIE_ATU_REGION_OUTBOUND;
+ break;
+ default:
+ return;
+ }
+
+ dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
+ dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE);
}
int dw_pcie_wait_for_link(struct dw_pcie *pci)
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index cd3b871..c6a8405 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -18,6 +18,9 @@
#include <linux/msi.h>
#include <linux/pci.h>
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+
/* Parameters for the waiting for link up routine */
#define LINK_WAIT_MAX_RETRIES 10
#define LINK_WAIT_USLEEP_MIN 90000
@@ -89,6 +92,16 @@
#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
((0x3 << 20) | ((region) << 9))
+#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
+ ((0x3 << 20) | ((region) << 9) | (0x1 << 8))
+
+#define MSI_MESSAGE_CONTROL 0x52
+#define MSI_CAP_MMC_SHIFT 1
+#define MSI_CAP_MME_SHIFT 4
+#define MSI_CAP_MME_MASK (7 << MSI_CAP_MME_SHIFT)
+#define MSI_MESSAGE_ADDR_L32 0x54
+#define MSI_MESSAGE_ADDR_U32 0x58
+
/*
* Maximum number of MSI IRQs can be 256 per controller. But keep
* it 32 as of now. Probably we will never need more than 32. If needed,
@@ -99,6 +112,20 @@
struct pcie_port;
struct dw_pcie;
+struct dw_pcie_ep;
+
+enum dw_pcie_region_type {
+ DW_PCIE_REGION_UNKNOWN,
+ DW_PCIE_REGION_INBOUND,
+ DW_PCIE_REGION_OUTBOUND,
+};
+
+enum dw_pcie_device_mode {
+ DW_PCIE_UNKNOWN_TYPE,
+ DW_PCIE_EP_TYPE,
+ DW_PCIE_LEG_EP_TYPE,
+ DW_PCIE_RC_TYPE,
+};
struct dw_pcie_host_ops {
int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
@@ -142,35 +169,116 @@ struct pcie_port {
DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
};
+enum dw_pcie_as_type {
+ DW_PCIE_AS_UNKNOWN,
+ DW_PCIE_AS_MEM,
+ DW_PCIE_AS_IO,
+};
+
+struct dw_pcie_ep_ops {
+ void (*ep_init)(struct dw_pcie_ep *ep);
+ int (*raise_irq)(struct dw_pcie_ep *ep, enum pci_epc_irq_type type,
+ u8 interrupt_num);
+};
+
+struct dw_pcie_ep {
+ struct pci_epc *epc;
+ struct dw_pcie_ep_ops *ops;
+ phys_addr_t phys_base;
+ size_t addr_size;
+ u8 bar_to_atu[6];
+ phys_addr_t *outbound_addr;
+ unsigned long ib_window_map;
+ unsigned long ob_window_map;
+ u32 num_ib_windows;
+ u32 num_ob_windows;
+};
+
struct dw_pcie_ops {
- u32 (*readl_dbi)(struct dw_pcie *pcie, u32 reg);
- void (*writel_dbi)(struct dw_pcie *pcie, u32 reg, u32 val);
+ u64 (*cpu_addr_fixup)(u64 cpu_addr);
+ u32 (*read_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
+ size_t size);
+ void (*write_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
+ size_t size, u32 val);
int (*link_up)(struct dw_pcie *pcie);
+ int (*start_link)(struct dw_pcie *pcie);
+ void (*stop_link)(struct dw_pcie *pcie);
};
struct dw_pcie {
struct device *dev;
void __iomem *dbi_base;
+ void __iomem *dbi_base2;
u32 num_viewport;
u8 iatu_unroll_enabled;
struct pcie_port pp;
+ struct dw_pcie_ep ep;
const struct dw_pcie_ops *ops;
};
#define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
+#define to_dw_pcie_from_ep(endpoint) \
+ container_of((endpoint), struct dw_pcie, ep)
+
int dw_pcie_read(void __iomem *addr, int size, u32 *val);
int dw_pcie_write(void __iomem *addr, int size, u32 val);
-u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg);
-void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val);
+u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+ size_t size);
+void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+ size_t size, u32 val);
int dw_pcie_link_up(struct dw_pcie *pci);
int dw_pcie_wait_for_link(struct dw_pcie *pci);
void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
int type, u64 cpu_addr, u64 pci_addr,
u32 size);
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
+ u64 cpu_addr, enum dw_pcie_as_type as_type);
+void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
+ enum dw_pcie_region_type type);
void dw_pcie_setup(struct dw_pcie *pci);
+static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+{
+ __dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+{
+ return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x4);
+}
+
+static inline void dw_pcie_writew_dbi(struct dw_pcie *pci, u32 reg, u16 val)
+{
+ __dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x2, val);
+}
+
+static inline u16 dw_pcie_readw_dbi(struct dw_pcie *pci, u32 reg)
+{
+ return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x2);
+}
+
+static inline void dw_pcie_writeb_dbi(struct dw_pcie *pci, u32 reg, u8 val)
+{
+ __dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x1, val);
+}
+
+static inline u8 dw_pcie_readb_dbi(struct dw_pcie *pci, u32 reg)
+{
+ return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x1);
+}
+
+static inline void dw_pcie_writel_dbi2(struct dw_pcie *pci, u32 reg, u32 val)
+{
+ __dw_pcie_write_dbi(pci, pci->dbi_base2, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg)
+{
+ return __dw_pcie_read_dbi(pci, pci->dbi_base2, reg, 0x4);
+}
+
#ifdef CONFIG_PCIE_DW_HOST
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
void dw_pcie_msi_init(struct pcie_port *pp);
@@ -195,4 +303,23 @@ static inline int dw_pcie_host_init(struct pcie_port *pp)
return 0;
}
#endif
+
+#ifdef CONFIG_PCIE_DW_EP
+void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
+int dw_pcie_ep_init(struct dw_pcie_ep *ep);
+void dw_pcie_ep_exit(struct dw_pcie_ep *ep);
+#else
+static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
+{
+}
+
+static inline int dw_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+ return 0;
+}
+
+static inline void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
+{
+}
+#endif
#endif /* _PCIE_DESIGNWARE_H */
diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
index cf9d6a9..e51acee 100644
--- a/drivers/pci/dwc/pcie-hisi.c
+++ b/drivers/pci/dwc/pcie-hisi.c
@@ -99,7 +99,7 @@ static int hisi_pcie_init(struct pci_config_window *cfg)
return -ENOMEM;
}
- reg_base = devm_ioremap(dev, res->start, resource_size(res));
+ reg_base = devm_pci_remap_cfgspace(dev, res->start, resource_size(res));
if (!reg_base)
return -ENOMEM;
@@ -296,10 +296,9 @@ static int hisi_pcie_probe(struct platform_device *pdev)
}
reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbi");
- pci->dbi_base = devm_ioremap_resource(dev, reg);
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, reg);
if (IS_ERR(pci->dbi_base))
return PTR_ERR(pci->dbi_base);
-
platform_set_drvdata(pdev, hisi_pcie);
ret = hisi_add_pcie_port(hisi_pcie, pdev);
@@ -334,6 +333,7 @@ static struct platform_driver hisi_pcie_driver = {
.driver = {
.name = "hisi-pcie",
.of_match_table = hisi_pcie_of_match,
+ .suppress_bind_attrs = true,
},
};
builtin_platform_driver(hisi_pcie_driver);
@@ -360,7 +360,7 @@ static int hisi_pcie_platform_init(struct pci_config_window *cfg)
return -EINVAL;
}
- reg_base = devm_ioremap(dev, res->start, resource_size(res));
+ reg_base = devm_pci_remap_cfgspace(dev, res->start, resource_size(res));
if (!reg_base)
return -ENOMEM;
@@ -395,6 +395,7 @@ static struct platform_driver hisi_pcie_almost_ecam_driver = {
.driver = {
.name = "hisi-pcie-almost-ecam",
.of_match_table = hisi_pcie_almost_ecam_of_match,
+ .suppress_bind_attrs = true,
},
};
builtin_platform_driver(hisi_pcie_almost_ecam_driver);
diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
index 67eb7f5..5bf23d4 100644
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -700,7 +700,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
return PTR_ERR(pcie->parf);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
- pci->dbi_base = devm_ioremap_resource(dev, res);
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
if (IS_ERR(pci->dbi_base))
return PTR_ERR(pci->dbi_base);
diff --git a/drivers/pci/dwc/pcie-spear13xx.c b/drivers/pci/dwc/pcie-spear13xx.c
index eaa4ea8..8ff36b3 100644
--- a/drivers/pci/dwc/pcie-spear13xx.c
+++ b/drivers/pci/dwc/pcie-spear13xx.c
@@ -273,7 +273,7 @@ static int spear13xx_pcie_probe(struct platform_device *pdev)
}
dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
- pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
if (IS_ERR(pci->dbi_base)) {
dev_err(dev, "couldn't remap dbi base %p\n", dbi_base);
ret = PTR_ERR(pci->dbi_base);
@@ -308,6 +308,7 @@ static struct platform_driver spear13xx_pcie_driver = {
.driver = {
.name = "spear-pcie",
.of_match_table = of_match_ptr(spear13xx_pcie_of_match),
+ .suppress_bind_attrs = true,
},
};
diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
index 2fee61b..c228a2e 100644
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -84,12 +84,14 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
if (!cfg->winp)
goto err_exit_malloc;
for (i = 0; i < bus_range; i++) {
- cfg->winp[i] = ioremap(cfgres->start + i * bsz, bsz);
+ cfg->winp[i] =
+ pci_remap_cfgspace(cfgres->start + i * bsz,
+ bsz);
if (!cfg->winp[i])
goto err_exit_iomap;
}
} else {
- cfg->win = ioremap(cfgres->start, bus_range * bsz);
+ cfg->win = pci_remap_cfgspace(cfgres->start, bus_range * bsz);
if (!cfg->win)
goto err_exit_iomap;
}
diff --git a/drivers/pci/endpoint/Kconfig b/drivers/pci/endpoint/Kconfig
new file mode 100644
index 0000000..c23f146
--- /dev/null
+++ b/drivers/pci/endpoint/Kconfig
@@ -0,0 +1,31 @@
+#
+# PCI Endpoint Support
+#
+
+menu "PCI Endpoint"
+
+config PCI_ENDPOINT
+ bool "PCI Endpoint Support"
+ help
+ Enable this configuration option to support configurable PCI
+ endpoint. This should be enabled if the platform has a PCI
+ controller that can operate in endpoint mode.
+
+ Enabling this option will build the endpoint library, which
+ includes endpoint controller library and endpoint function
+ library.
+
+ If in doubt, say "N" to disable Endpoint support.
+
+config PCI_ENDPOINT_CONFIGFS
+ bool "PCI Endpoint Configfs Support"
+ depends on PCI_ENDPOINT
+ select CONFIGFS_FS
+ help
+ This will enable the configfs entry that can be used to
+ configure the endpoint function and used to bind the
+ function with a endpoint controller.
+
+source "drivers/pci/endpoint/functions/Kconfig"
+
+endmenu
diff --git a/drivers/pci/endpoint/Makefile b/drivers/pci/endpoint/Makefile
new file mode 100644
index 0000000..1041f80
--- /dev/null
+++ b/drivers/pci/endpoint/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for PCI Endpoint Support
+#
+
+obj-$(CONFIG_PCI_ENDPOINT_CONFIGFS) += pci-ep-cfs.o
+obj-$(CONFIG_PCI_ENDPOINT) += pci-epc-core.o pci-epf-core.o\
+ pci-epc-mem.o functions/
diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
new file mode 100644
index 0000000..175edad
--- /dev/null
+++ b/drivers/pci/endpoint/functions/Kconfig
@@ -0,0 +1,12 @@
+#
+# PCI Endpoint Functions
+#
+
+config PCI_EPF_TEST
+ tristate "PCI Endpoint Test driver"
+ depends on PCI_ENDPOINT
+ help
+ Enable this configuration option to enable the test driver
+ for PCI Endpoint.
+
+ If in doubt, say "N" to disable Endpoint test driver.
diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
new file mode 100644
index 0000000..6d94a48
--- /dev/null
+++ b/drivers/pci/endpoint/functions/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for PCI Endpoint Functions
+#
+
+obj-$(CONFIG_PCI_EPF_TEST) += pci-epf-test.o
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
new file mode 100644
index 0000000..53fff80
--- /dev/null
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -0,0 +1,510 @@
+/**
+ * Test driver to test endpoint functionality
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+#include <linux/random.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci_regs.h>
+
+#define COMMAND_RAISE_LEGACY_IRQ BIT(0)
+#define COMMAND_RAISE_MSI_IRQ BIT(1)
+#define MSI_NUMBER_SHIFT 2
+#define MSI_NUMBER_MASK (0x3f << MSI_NUMBER_SHIFT)
+#define COMMAND_READ BIT(8)
+#define COMMAND_WRITE BIT(9)
+#define COMMAND_COPY BIT(10)
+
+#define STATUS_READ_SUCCESS BIT(0)
+#define STATUS_READ_FAIL BIT(1)
+#define STATUS_WRITE_SUCCESS BIT(2)
+#define STATUS_WRITE_FAIL BIT(3)
+#define STATUS_COPY_SUCCESS BIT(4)
+#define STATUS_COPY_FAIL BIT(5)
+#define STATUS_IRQ_RAISED BIT(6)
+#define STATUS_SRC_ADDR_INVALID BIT(7)
+#define STATUS_DST_ADDR_INVALID BIT(8)
+
+#define TIMER_RESOLUTION 1
+
+static struct workqueue_struct *kpcitest_workqueue;
+
+struct pci_epf_test {
+ void *reg[6];
+ struct pci_epf *epf;
+ struct delayed_work cmd_handler;
+};
+
+struct pci_epf_test_reg {
+ u32 magic;
+ u32 command;
+ u32 status;
+ u64 src_addr;
+ u64 dst_addr;
+ u32 size;
+ u32 checksum;
+} __packed;
+
+static struct pci_epf_header test_header = {
+ .vendorid = PCI_ANY_ID,
+ .deviceid = PCI_ANY_ID,
+ .baseclass_code = PCI_CLASS_OTHERS,
+ .interrupt_pin = PCI_INTERRUPT_INTA,
+};
+
+static int bar_size[] = { 512, 1024, 16384, 131072, 1048576 };
+
+static int pci_epf_test_copy(struct pci_epf_test *epf_test)
+{
+ int ret;
+ void __iomem *src_addr;
+ void __iomem *dst_addr;
+ phys_addr_t src_phys_addr;
+ phys_addr_t dst_phys_addr;
+ struct pci_epf *epf = epf_test->epf;
+ struct device *dev = &epf->dev;
+ struct pci_epc *epc = epf->epc;
+ struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+ src_addr = pci_epc_mem_alloc_addr(epc, &src_phys_addr, reg->size);
+ if (!src_addr) {
+ dev_err(dev, "failed to allocate source address\n");
+ reg->status = STATUS_SRC_ADDR_INVALID;
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = pci_epc_map_addr(epc, src_phys_addr, reg->src_addr, reg->size);
+ if (ret) {
+ dev_err(dev, "failed to map source address\n");
+ reg->status = STATUS_SRC_ADDR_INVALID;
+ goto err_src_addr;
+ }
+
+ dst_addr = pci_epc_mem_alloc_addr(epc, &dst_phys_addr, reg->size);
+ if (!dst_addr) {
+ dev_err(dev, "failed to allocate destination address\n");
+ reg->status = STATUS_DST_ADDR_INVALID;
+ ret = -ENOMEM;
+ goto err_src_map_addr;
+ }
+
+ ret = pci_epc_map_addr(epc, dst_phys_addr, reg->dst_addr, reg->size);
+ if (ret) {
+ dev_err(dev, "failed to map destination address\n");
+ reg->status = STATUS_DST_ADDR_INVALID;
+ goto err_dst_addr;
+ }
+
+ memcpy(dst_addr, src_addr, reg->size);
+
+ pci_epc_unmap_addr(epc, dst_phys_addr);
+
+err_dst_addr:
+ pci_epc_mem_free_addr(epc, dst_phys_addr, dst_addr, reg->size);
+
+err_src_map_addr:
+ pci_epc_unmap_addr(epc, src_phys_addr);
+
+err_src_addr:
+ pci_epc_mem_free_addr(epc, src_phys_addr, src_addr, reg->size);
+
+err:
+ return ret;
+}
+
+static int pci_epf_test_read(struct pci_epf_test *epf_test)
+{
+ int ret;
+ void __iomem *src_addr;
+ void *buf;
+ u32 crc32;
+ phys_addr_t phys_addr;
+ struct pci_epf *epf = epf_test->epf;
+ struct device *dev = &epf->dev;
+ struct pci_epc *epc = epf->epc;
+ struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+ src_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, reg->size);
+ if (!src_addr) {
+ dev_err(dev, "failed to allocate address\n");
+ reg->status = STATUS_SRC_ADDR_INVALID;
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = pci_epc_map_addr(epc, phys_addr, reg->src_addr, reg->size);
+ if (ret) {
+ dev_err(dev, "failed to map address\n");
+ reg->status = STATUS_SRC_ADDR_INVALID;
+ goto err_addr;
+ }
+
+ buf = kzalloc(reg->size, GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto err_map_addr;
+ }
+
+ memcpy(buf, src_addr, reg->size);
+
+ crc32 = crc32_le(~0, buf, reg->size);
+ if (crc32 != reg->checksum)
+ ret = -EIO;
+
+ kfree(buf);
+
+err_map_addr:
+ pci_epc_unmap_addr(epc, phys_addr);
+
+err_addr:
+ pci_epc_mem_free_addr(epc, phys_addr, src_addr, reg->size);
+
+err:
+ return ret;
+}
+
+static int pci_epf_test_write(struct pci_epf_test *epf_test)
+{
+ int ret;
+ void __iomem *dst_addr;
+ void *buf;
+ phys_addr_t phys_addr;
+ struct pci_epf *epf = epf_test->epf;
+ struct device *dev = &epf->dev;
+ struct pci_epc *epc = epf->epc;
+ struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+ dst_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, reg->size);
+ if (!dst_addr) {
+ dev_err(dev, "failed to allocate address\n");
+ reg->status = STATUS_DST_ADDR_INVALID;
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = pci_epc_map_addr(epc, phys_addr, reg->dst_addr, reg->size);
+ if (ret) {
+ dev_err(dev, "failed to map address\n");
+ reg->status = STATUS_DST_ADDR_INVALID;
+ goto err_addr;
+ }
+
+ buf = kzalloc(reg->size, GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto err_map_addr;
+ }
+
+ get_random_bytes(buf, reg->size);
+ reg->checksum = crc32_le(~0, buf, reg->size);
+
+ memcpy(dst_addr, buf, reg->size);
+
+ /*
+ * wait 1ms inorder for the write to complete. Without this delay L3
+ * error in observed in the host system.
+ */
+ mdelay(1);
+
+ kfree(buf);
+
+err_map_addr:
+ pci_epc_unmap_addr(epc, phys_addr);
+
+err_addr:
+ pci_epc_mem_free_addr(epc, phys_addr, dst_addr, reg->size);
+
+err:
+ return ret;
+}
+
+static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test)
+{
+ u8 irq;
+ u8 msi_count;
+ struct pci_epf *epf = epf_test->epf;
+ struct pci_epc *epc = epf->epc;
+ struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+ reg->status |= STATUS_IRQ_RAISED;
+ msi_count = pci_epc_get_msi(epc);
+ irq = (reg->command & MSI_NUMBER_MASK) >> MSI_NUMBER_SHIFT;
+ if (irq > msi_count || msi_count <= 0)
+ pci_epc_raise_irq(epc, PCI_EPC_IRQ_LEGACY, 0);
+ else
+ pci_epc_raise_irq(epc, PCI_EPC_IRQ_MSI, irq);
+}
+
+static void pci_epf_test_cmd_handler(struct work_struct *work)
+{
+ int ret;
+ u8 irq;
+ u8 msi_count;
+ struct pci_epf_test *epf_test = container_of(work, struct pci_epf_test,
+ cmd_handler.work);
+ struct pci_epf *epf = epf_test->epf;
+ struct pci_epc *epc = epf->epc;
+ struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+ if (!reg->command)
+ goto reset_handler;
+
+ if (reg->command & COMMAND_RAISE_LEGACY_IRQ) {
+ reg->status = STATUS_IRQ_RAISED;
+ pci_epc_raise_irq(epc, PCI_EPC_IRQ_LEGACY, 0);
+ goto reset_handler;
+ }
+
+ if (reg->command & COMMAND_WRITE) {
+ ret = pci_epf_test_write(epf_test);
+ if (ret)
+ reg->status |= STATUS_WRITE_FAIL;
+ else
+ reg->status |= STATUS_WRITE_SUCCESS;
+ pci_epf_test_raise_irq(epf_test);
+ goto reset_handler;
+ }
+
+ if (reg->command & COMMAND_READ) {
+ ret = pci_epf_test_read(epf_test);
+ if (!ret)
+ reg->status |= STATUS_READ_SUCCESS;
+ else
+ reg->status |= STATUS_READ_FAIL;
+ pci_epf_test_raise_irq(epf_test);
+ goto reset_handler;
+ }
+
+ if (reg->command & COMMAND_COPY) {
+ ret = pci_epf_test_copy(epf_test);
+ if (!ret)
+ reg->status |= STATUS_COPY_SUCCESS;
+ else
+ reg->status |= STATUS_COPY_FAIL;
+ pci_epf_test_raise_irq(epf_test);
+ goto reset_handler;
+ }
+
+ if (reg->command & COMMAND_RAISE_MSI_IRQ) {
+ msi_count = pci_epc_get_msi(epc);
+ irq = (reg->command & MSI_NUMBER_MASK) >> MSI_NUMBER_SHIFT;
+ if (irq > msi_count || msi_count <= 0)
+ goto reset_handler;
+ reg->status = STATUS_IRQ_RAISED;
+ pci_epc_raise_irq(epc, PCI_EPC_IRQ_MSI, irq);
+ goto reset_handler;
+ }
+
+reset_handler:
+ reg->command = 0;
+
+ queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler,
+ msecs_to_jiffies(1));
+}
+
+static void pci_epf_test_linkup(struct pci_epf *epf)
+{
+ struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+ queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler,
+ msecs_to_jiffies(1));
+}
+
+static void pci_epf_test_unbind(struct pci_epf *epf)
+{
+ struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+ struct pci_epc *epc = epf->epc;
+ int bar;
+
+ cancel_delayed_work(&epf_test->cmd_handler);
+ pci_epc_stop(epc);
+ for (bar = BAR_0; bar <= BAR_5; bar++) {
+ if (epf_test->reg[bar]) {
+ pci_epf_free_space(epf, epf_test->reg[bar], bar);
+ pci_epc_clear_bar(epc, bar);
+ }
+ }
+}
+
+static int pci_epf_test_set_bar(struct pci_epf *epf)
+{
+ int flags;
+ int bar;
+ int ret;
+ struct pci_epf_bar *epf_bar;
+ struct pci_epc *epc = epf->epc;
+ struct device *dev = &epf->dev;
+ struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+ flags = PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_32;
+ if (sizeof(dma_addr_t) == 0x8)
+ flags |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
+ for (bar = BAR_0; bar <= BAR_5; bar++) {
+ epf_bar = &epf->bar[bar];
+ ret = pci_epc_set_bar(epc, bar, epf_bar->phys_addr,
+ epf_bar->size, flags);
+ if (ret) {
+ pci_epf_free_space(epf, epf_test->reg[bar], bar);
+ dev_err(dev, "failed to set BAR%d\n", bar);
+ if (bar == BAR_0)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int pci_epf_test_alloc_space(struct pci_epf *epf)
+{
+ struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+ struct device *dev = &epf->dev;
+ void *base;
+ int bar;
+
+ base = pci_epf_alloc_space(epf, sizeof(struct pci_epf_test_reg),
+ BAR_0);
+ if (!base) {
+ dev_err(dev, "failed to allocated register space\n");
+ return -ENOMEM;
+ }
+ epf_test->reg[0] = base;
+
+ for (bar = BAR_1; bar <= BAR_5; bar++) {
+ base = pci_epf_alloc_space(epf, bar_size[bar - 1], bar);
+ if (!base)
+ dev_err(dev, "failed to allocate space for BAR%d\n",
+ bar);
+ epf_test->reg[bar] = base;
+ }
+
+ return 0;
+}
+
+static int pci_epf_test_bind(struct pci_epf *epf)
+{
+ int ret;
+ struct pci_epf_header *header = epf->header;
+ struct pci_epc *epc = epf->epc;
+ struct device *dev = &epf->dev;
+
+ if (WARN_ON_ONCE(!epc))
+ return -EINVAL;
+
+ ret = pci_epc_write_header(epc, header);
+ if (ret) {
+ dev_err(dev, "configuration header write failed\n");
+ return ret;
+ }
+
+ ret = pci_epf_test_alloc_space(epf);
+ if (ret)
+ return ret;
+
+ ret = pci_epf_test_set_bar(epf);
+ if (ret)
+ return ret;
+
+ ret = pci_epc_set_msi(epc, epf->msi_interrupts);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int pci_epf_test_probe(struct pci_epf *epf)
+{
+ struct pci_epf_test *epf_test;
+ struct device *dev = &epf->dev;
+
+ epf_test = devm_kzalloc(dev, sizeof(*epf_test), GFP_KERNEL);
+ if (!epf_test)
+ return -ENOMEM;
+
+ epf->header = &test_header;
+ epf_test->epf = epf;
+
+ INIT_DELAYED_WORK(&epf_test->cmd_handler, pci_epf_test_cmd_handler);
+
+ epf_set_drvdata(epf, epf_test);
+ return 0;
+}
+
+static int pci_epf_test_remove(struct pci_epf *epf)
+{
+ struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+ kfree(epf_test);
+ return 0;
+}
+
+static struct pci_epf_ops ops = {
+ .unbind = pci_epf_test_unbind,
+ .bind = pci_epf_test_bind,
+ .linkup = pci_epf_test_linkup,
+};
+
+static const struct pci_epf_device_id pci_epf_test_ids[] = {
+ {
+ .name = "pci_epf_test",
+ },
+ {},
+};
+
+static struct pci_epf_driver test_driver = {
+ .driver.name = "pci_epf_test",
+ .probe = pci_epf_test_probe,
+ .remove = pci_epf_test_remove,
+ .id_table = pci_epf_test_ids,
+ .ops = &ops,
+ .owner = THIS_MODULE,
+};
+
+static int __init pci_epf_test_init(void)
+{
+ int ret;
+
+ kpcitest_workqueue = alloc_workqueue("kpcitest",
+ WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
+ ret = pci_epf_register_driver(&test_driver);
+ if (ret) {
+ pr_err("failed to register pci epf test driver --> %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+module_init(pci_epf_test_init);
+
+static void __exit pci_epf_test_exit(void)
+{
+ pci_epf_unregister_driver(&test_driver);
+}
+module_exit(pci_epf_test_exit);
+
+MODULE_DESCRIPTION("PCI EPF TEST DRIVER");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c
new file mode 100644
index 0000000..424fdd6
--- /dev/null
+++ b/drivers/pci/endpoint/pci-ep-cfs.c
@@ -0,0 +1,509 @@
+/**
+ * configfs to configure the PCI endpoint
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct config_group *functions_group;
+static struct config_group *controllers_group;
+
+struct pci_epf_group {
+ struct config_group group;
+ struct pci_epf *epf;
+};
+
+struct pci_epc_group {
+ struct config_group group;
+ struct pci_epc *epc;
+ bool start;
+ unsigned long function_num_map;
+};
+
+static inline struct pci_epf_group *to_pci_epf_group(struct config_item *item)
+{
+ return container_of(to_config_group(item), struct pci_epf_group, group);
+}
+
+static inline struct pci_epc_group *to_pci_epc_group(struct config_item *item)
+{
+ return container_of(to_config_group(item), struct pci_epc_group, group);
+}
+
+static ssize_t pci_epc_start_store(struct config_item *item, const char *page,
+ size_t len)
+{
+ int ret;
+ bool start;
+ struct pci_epc *epc;
+ struct pci_epc_group *epc_group = to_pci_epc_group(item);
+
+ epc = epc_group->epc;
+
+ ret = kstrtobool(page, &start);
+ if (ret)
+ return ret;
+
+ if (!start) {
+ pci_epc_stop(epc);
+ return len;
+ }
+
+ ret = pci_epc_start(epc);
+ if (ret) {
+ dev_err(&epc->dev, "failed to start endpoint controller\n");
+ return -EINVAL;
+ }
+
+ epc_group->start = start;
+
+ return len;
+}
+
+static ssize_t pci_epc_start_show(struct config_item *item, char *page)
+{
+ return sprintf(page, "%d\n",
+ to_pci_epc_group(item)->start);
+}
+
+CONFIGFS_ATTR(pci_epc_, start);
+
+static struct configfs_attribute *pci_epc_attrs[] = {
+ &pci_epc_attr_start,
+ NULL,
+};
+
+static int pci_epc_epf_link(struct config_item *epc_item,
+ struct config_item *epf_item)
+{
+ int ret;
+ u32 func_no = 0;
+ struct pci_epc *epc;
+ struct pci_epf *epf;
+ struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
+ struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+
+ epc = epc_group->epc;
+ epf = epf_group->epf;
+ ret = pci_epc_add_epf(epc, epf);
+ if (ret)
+ goto err_add_epf;
+
+ func_no = find_first_zero_bit(&epc_group->function_num_map,
+ sizeof(epc_group->function_num_map));
+ set_bit(func_no, &epc_group->function_num_map);
+ epf->func_no = func_no;
+
+ ret = pci_epf_bind(epf);
+ if (ret)
+ goto err_epf_bind;
+
+ return 0;
+
+err_epf_bind:
+ pci_epc_remove_epf(epc, epf);
+
+err_add_epf:
+ clear_bit(func_no, &epc_group->function_num_map);
+
+ return ret;
+}
+
+static void pci_epc_epf_unlink(struct config_item *epc_item,
+ struct config_item *epf_item)
+{
+ struct pci_epc *epc;
+ struct pci_epf *epf;
+ struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
+ struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+
+ WARN_ON_ONCE(epc_group->start);
+
+ epc = epc_group->epc;
+ epf = epf_group->epf;
+ clear_bit(epf->func_no, &epc_group->function_num_map);
+ pci_epf_unbind(epf);
+ pci_epc_remove_epf(epc, epf);
+}
+
+static struct configfs_item_operations pci_epc_item_ops = {
+ .allow_link = pci_epc_epf_link,
+ .drop_link = pci_epc_epf_unlink,
+};
+
+static struct config_item_type pci_epc_type = {
+ .ct_item_ops = &pci_epc_item_ops,
+ .ct_attrs = pci_epc_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+struct config_group *pci_ep_cfs_add_epc_group(const char *name)
+{
+ int ret;
+ struct pci_epc *epc;
+ struct config_group *group;
+ struct pci_epc_group *epc_group;
+
+ epc_group = kzalloc(sizeof(*epc_group), GFP_KERNEL);
+ if (!epc_group) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ group = &epc_group->group;
+
+ config_group_init_type_name(group, name, &pci_epc_type);
+ ret = configfs_register_group(controllers_group, group);
+ if (ret) {
+ pr_err("failed to register configfs group for %s\n", name);
+ goto err_register_group;
+ }
+
+ epc = pci_epc_get(name);
+ if (IS_ERR(epc)) {
+ ret = PTR_ERR(epc);
+ goto err_epc_get;
+ }
+
+ epc_group->epc = epc;
+
+ return group;
+
+err_epc_get:
+ configfs_unregister_group(group);
+
+err_register_group:
+ kfree(epc_group);
+
+err:
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(pci_ep_cfs_add_epc_group);
+
+void pci_ep_cfs_remove_epc_group(struct config_group *group)
+{
+ struct pci_epc_group *epc_group;
+
+ if (!group)
+ return;
+
+ epc_group = container_of(group, struct pci_epc_group, group);
+ pci_epc_put(epc_group->epc);
+ configfs_unregister_group(&epc_group->group);
+ kfree(epc_group);
+}
+EXPORT_SYMBOL(pci_ep_cfs_remove_epc_group);
+
+#define PCI_EPF_HEADER_R(_name) \
+static ssize_t pci_epf_##_name##_show(struct config_item *item, char *page) \
+{ \
+ struct pci_epf *epf = to_pci_epf_group(item)->epf; \
+ if (WARN_ON_ONCE(!epf->header)) \
+ return -EINVAL; \
+ return sprintf(page, "0x%04x\n", epf->header->_name); \
+}
+
+#define PCI_EPF_HEADER_W_u32(_name) \
+static ssize_t pci_epf_##_name##_store(struct config_item *item, \
+ const char *page, size_t len) \
+{ \
+ u32 val; \
+ int ret; \
+ struct pci_epf *epf = to_pci_epf_group(item)->epf; \
+ if (WARN_ON_ONCE(!epf->header)) \
+ return -EINVAL; \
+ ret = kstrtou32(page, 0, &val); \
+ if (ret) \
+ return ret; \
+ epf->header->_name = val; \
+ return len; \
+}
+
+#define PCI_EPF_HEADER_W_u16(_name) \
+static ssize_t pci_epf_##_name##_store(struct config_item *item, \
+ const char *page, size_t len) \
+{ \
+ u16 val; \
+ int ret; \
+ struct pci_epf *epf = to_pci_epf_group(item)->epf; \
+ if (WARN_ON_ONCE(!epf->header)) \
+ return -EINVAL; \
+ ret = kstrtou16(page, 0, &val); \
+ if (ret) \
+ return ret; \
+ epf->header->_name = val; \
+ return len; \
+}
+
+#define PCI_EPF_HEADER_W_u8(_name) \
+static ssize_t pci_epf_##_name##_store(struct config_item *item, \
+ const char *page, size_t len) \
+{ \
+ u8 val; \
+ int ret; \
+ struct pci_epf *epf = to_pci_epf_group(item)->epf; \
+ if (WARN_ON_ONCE(!epf->header)) \
+ return -EINVAL; \
+ ret = kstrtou8(page, 0, &val); \
+ if (ret) \
+ return ret; \
+ epf->header->_name = val; \
+ return len; \
+}
+
+static ssize_t pci_epf_msi_interrupts_store(struct config_item *item,
+ const char *page, size_t len)
+{
+ u8 val;
+ int ret;
+
+ ret = kstrtou8(page, 0, &val);
+ if (ret)
+ return ret;
+
+ to_pci_epf_group(item)->epf->msi_interrupts = val;
+
+ return len;
+}
+
+static ssize_t pci_epf_msi_interrupts_show(struct config_item *item,
+ char *page)
+{
+ return sprintf(page, "%d\n",
+ to_pci_epf_group(item)->epf->msi_interrupts);
+}
+
+PCI_EPF_HEADER_R(vendorid)
+PCI_EPF_HEADER_W_u16(vendorid)
+
+PCI_EPF_HEADER_R(deviceid)
+PCI_EPF_HEADER_W_u16(deviceid)
+
+PCI_EPF_HEADER_R(revid)
+PCI_EPF_HEADER_W_u8(revid)
+
+PCI_EPF_HEADER_R(progif_code)
+PCI_EPF_HEADER_W_u8(progif_code)
+
+PCI_EPF_HEADER_R(subclass_code)
+PCI_EPF_HEADER_W_u8(subclass_code)
+
+PCI_EPF_HEADER_R(baseclass_code)
+PCI_EPF_HEADER_W_u8(baseclass_code)
+
+PCI_EPF_HEADER_R(cache_line_size)
+PCI_EPF_HEADER_W_u8(cache_line_size)
+
+PCI_EPF_HEADER_R(subsys_vendor_id)
+PCI_EPF_HEADER_W_u16(subsys_vendor_id)
+
+PCI_EPF_HEADER_R(subsys_id)
+PCI_EPF_HEADER_W_u16(subsys_id)
+
+PCI_EPF_HEADER_R(interrupt_pin)
+PCI_EPF_HEADER_W_u8(interrupt_pin)
+
+CONFIGFS_ATTR(pci_epf_, vendorid);
+CONFIGFS_ATTR(pci_epf_, deviceid);
+CONFIGFS_ATTR(pci_epf_, revid);
+CONFIGFS_ATTR(pci_epf_, progif_code);
+CONFIGFS_ATTR(pci_epf_, subclass_code);
+CONFIGFS_ATTR(pci_epf_, baseclass_code);
+CONFIGFS_ATTR(pci_epf_, cache_line_size);
+CONFIGFS_ATTR(pci_epf_, subsys_vendor_id);
+CONFIGFS_ATTR(pci_epf_, subsys_id);
+CONFIGFS_ATTR(pci_epf_, interrupt_pin);
+CONFIGFS_ATTR(pci_epf_, msi_interrupts);
+
+static struct configfs_attribute *pci_epf_attrs[] = {
+ &pci_epf_attr_vendorid,
+ &pci_epf_attr_deviceid,
+ &pci_epf_attr_revid,
+ &pci_epf_attr_progif_code,
+ &pci_epf_attr_subclass_code,
+ &pci_epf_attr_baseclass_code,
+ &pci_epf_attr_cache_line_size,
+ &pci_epf_attr_subsys_vendor_id,
+ &pci_epf_attr_subsys_id,
+ &pci_epf_attr_interrupt_pin,
+ &pci_epf_attr_msi_interrupts,
+ NULL,
+};
+
+static void pci_epf_release(struct config_item *item)
+{
+ struct pci_epf_group *epf_group = to_pci_epf_group(item);
+
+ pci_epf_destroy(epf_group->epf);
+ kfree(epf_group);
+}
+
+static struct configfs_item_operations pci_epf_ops = {
+ .release = pci_epf_release,
+};
+
+static struct config_item_type pci_epf_type = {
+ .ct_item_ops = &pci_epf_ops,
+ .ct_attrs = pci_epf_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static struct config_group *pci_epf_make(struct config_group *group,
+ const char *name)
+{
+ struct pci_epf_group *epf_group;
+ struct pci_epf *epf;
+
+ epf_group = kzalloc(sizeof(*epf_group), GFP_KERNEL);
+ if (!epf_group)
+ return ERR_PTR(-ENOMEM);
+
+ config_group_init_type_name(&epf_group->group, name, &pci_epf_type);
+
+ epf = pci_epf_create(group->cg_item.ci_name);
+ if (IS_ERR(epf)) {
+ pr_err("failed to create endpoint function device\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ epf_group->epf = epf;
+
+ return &epf_group->group;
+}
+
+static void pci_epf_drop(struct config_group *group, struct config_item *item)
+{
+ config_item_put(item);
+}
+
+static struct configfs_group_operations pci_epf_group_ops = {
+ .make_group = &pci_epf_make,
+ .drop_item = &pci_epf_drop,
+};
+
+static struct config_item_type pci_epf_group_type = {
+ .ct_group_ops = &pci_epf_group_ops,
+ .ct_owner = THIS_MODULE,
+};
+
+struct config_group *pci_ep_cfs_add_epf_group(const char *name)
+{
+ struct config_group *group;
+
+ group = configfs_register_default_group(functions_group, name,
+ &pci_epf_group_type);
+ if (IS_ERR(group))
+ pr_err("failed to register configfs group for %s function\n",
+ name);
+
+ return group;
+}
+EXPORT_SYMBOL(pci_ep_cfs_add_epf_group);
+
+void pci_ep_cfs_remove_epf_group(struct config_group *group)
+{
+ if (IS_ERR_OR_NULL(group))
+ return;
+
+ configfs_unregister_default_group(group);
+}
+EXPORT_SYMBOL(pci_ep_cfs_remove_epf_group);
+
+static struct config_item_type pci_functions_type = {
+ .ct_owner = THIS_MODULE,
+};
+
+static struct config_item_type pci_controllers_type = {
+ .ct_owner = THIS_MODULE,
+};
+
+static struct config_item_type pci_ep_type = {
+ .ct_owner = THIS_MODULE,
+};
+
+static struct configfs_subsystem pci_ep_cfs_subsys = {
+ .su_group = {
+ .cg_item = {
+ .ci_namebuf = "pci_ep",
+ .ci_type = &pci_ep_type,
+ },
+ },
+ .su_mutex = __MUTEX_INITIALIZER(pci_ep_cfs_subsys.su_mutex),
+};
+
+static int __init pci_ep_cfs_init(void)
+{
+ int ret;
+ struct config_group *root = &pci_ep_cfs_subsys.su_group;
+
+ config_group_init(root);
+
+ ret = configfs_register_subsystem(&pci_ep_cfs_subsys);
+ if (ret) {
+ pr_err("Error %d while registering subsystem %s\n",
+ ret, root->cg_item.ci_namebuf);
+ goto err;
+ }
+
+ functions_group = configfs_register_default_group(root, "functions",
+ &pci_functions_type);
+ if (IS_ERR(functions_group)) {
+ ret = PTR_ERR(functions_group);
+ pr_err("Error %d while registering functions group\n",
+ ret);
+ goto err_functions_group;
+ }
+
+ controllers_group =
+ configfs_register_default_group(root, "controllers",
+ &pci_controllers_type);
+ if (IS_ERR(controllers_group)) {
+ ret = PTR_ERR(controllers_group);
+ pr_err("Error %d while registering controllers group\n",
+ ret);
+ goto err_controllers_group;
+ }
+
+ return 0;
+
+err_controllers_group:
+ configfs_unregister_default_group(functions_group);
+
+err_functions_group:
+ configfs_unregister_subsystem(&pci_ep_cfs_subsys);
+
+err:
+ return ret;
+}
+module_init(pci_ep_cfs_init);
+
+static void __exit pci_ep_cfs_exit(void)
+{
+ configfs_unregister_default_group(controllers_group);
+ configfs_unregister_default_group(functions_group);
+ configfs_unregister_subsystem(&pci_ep_cfs_subsys);
+}
+module_exit(pci_ep_cfs_exit);
+
+MODULE_DESCRIPTION("PCI EP CONFIGFS");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
new file mode 100644
index 0000000..caa7be1
--- /dev/null
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -0,0 +1,580 @@
+/**
+ * PCI Endpoint *Controller* (EPC) library
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct class *pci_epc_class;
+
+static void devm_pci_epc_release(struct device *dev, void *res)
+{
+ struct pci_epc *epc = *(struct pci_epc **)res;
+
+ pci_epc_destroy(epc);
+}
+
+static int devm_pci_epc_match(struct device *dev, void *res, void *match_data)
+{
+ struct pci_epc **epc = res;
+
+ return *epc == match_data;
+}
+
+/**
+ * pci_epc_put() - release the PCI endpoint controller
+ * @epc: epc returned by pci_epc_get()
+ *
+ * release the refcount the caller obtained by invoking pci_epc_get()
+ */
+void pci_epc_put(struct pci_epc *epc)
+{
+ if (!epc || IS_ERR(epc))
+ return;
+
+ module_put(epc->ops->owner);
+ put_device(&epc->dev);
+}
+EXPORT_SYMBOL_GPL(pci_epc_put);
+
+/**
+ * pci_epc_get() - get the PCI endpoint controller
+ * @epc_name: device name of the endpoint controller
+ *
+ * Invoke to get struct pci_epc * corresponding to the device name of the
+ * endpoint controller
+ */
+struct pci_epc *pci_epc_get(const char *epc_name)
+{
+ int ret = -EINVAL;
+ struct pci_epc *epc;
+ struct device *dev;
+ struct class_dev_iter iter;
+
+ class_dev_iter_init(&iter, pci_epc_class, NULL, NULL);
+ while ((dev = class_dev_iter_next(&iter))) {
+ if (strcmp(epc_name, dev_name(dev)))
+ continue;
+
+ epc = to_pci_epc(dev);
+ if (!try_module_get(epc->ops->owner)) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ class_dev_iter_exit(&iter);
+ get_device(&epc->dev);
+ return epc;
+ }
+
+err:
+ class_dev_iter_exit(&iter);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pci_epc_get);
+
+/**
+ * pci_epc_stop() - stop the PCI link
+ * @epc: the link of the EPC device that has to be stopped
+ *
+ * Invoke to stop the PCI link
+ */
+void pci_epc_stop(struct pci_epc *epc)
+{
+ unsigned long flags;
+
+ if (IS_ERR(epc) || !epc->ops->stop)
+ return;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ epc->ops->stop(epc);
+ spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_stop);
+
+/**
+ * pci_epc_start() - start the PCI link
+ * @epc: the link of *this* EPC device has to be started
+ *
+ * Invoke to start the PCI link
+ */
+int pci_epc_start(struct pci_epc *epc)
+{
+ int ret;
+ unsigned long flags;
+
+ if (IS_ERR(epc))
+ return -EINVAL;
+
+ if (!epc->ops->start)
+ return 0;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ ret = epc->ops->start(epc);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_start);
+
+/**
+ * pci_epc_raise_irq() - interrupt the host system
+ * @epc: the EPC device which has to interrupt the host
+ * @type: specify the type of interrupt; legacy or MSI
+ * @interrupt_num: the MSI interrupt number
+ *
+ * Invoke to raise an MSI or legacy interrupt
+ */
+int pci_epc_raise_irq(struct pci_epc *epc, enum pci_epc_irq_type type,
+ u8 interrupt_num)
+{
+ int ret;
+ unsigned long flags;
+
+ if (IS_ERR(epc))
+ return -EINVAL;
+
+ if (!epc->ops->raise_irq)
+ return 0;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ ret = epc->ops->raise_irq(epc, type, interrupt_num);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_raise_irq);
+
+/**
+ * pci_epc_get_msi() - get the number of MSI interrupt numbers allocated
+ * @epc: the EPC device to which MSI interrupts was requested
+ *
+ * Invoke to get the number of MSI interrupts allocated by the RC
+ */
+int pci_epc_get_msi(struct pci_epc *epc)
+{
+ int interrupt;
+ unsigned long flags;
+
+ if (IS_ERR(epc))
+ return 0;
+
+ if (!epc->ops->get_msi)
+ return 0;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ interrupt = epc->ops->get_msi(epc);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ if (interrupt < 0)
+ return 0;
+
+ interrupt = 1 << interrupt;
+
+ return interrupt;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_msi);
+
+/**
+ * pci_epc_set_msi() - set the number of MSI interrupt numbers required
+ * @epc: the EPC device on which MSI has to be configured
+ * @interrupts: number of MSI interrupts required by the EPF
+ *
+ * Invoke to set the required number of MSI interrupts.
+ */
+int pci_epc_set_msi(struct pci_epc *epc, u8 interrupts)
+{
+ int ret;
+ u8 encode_int;
+ unsigned long flags;
+
+ if (IS_ERR(epc))
+ return -EINVAL;
+
+ if (!epc->ops->set_msi)
+ return 0;
+
+ encode_int = order_base_2(interrupts);
+
+ spin_lock_irqsave(&epc->lock, flags);
+ ret = epc->ops->set_msi(epc, encode_int);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_msi);
+
+/**
+ * pci_epc_unmap_addr() - unmap CPU address from PCI address
+ * @epc: the EPC device on which address is allocated
+ * @phys_addr: physical address of the local system
+ *
+ * Invoke to unmap the CPU address from PCI address.
+ */
+void pci_epc_unmap_addr(struct pci_epc *epc, phys_addr_t phys_addr)
+{
+ unsigned long flags;
+
+ if (IS_ERR(epc))
+ return;
+
+ if (!epc->ops->unmap_addr)
+ return;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ epc->ops->unmap_addr(epc, phys_addr);
+ spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
+
+/**
+ * pci_epc_map_addr() - map CPU address to PCI address
+ * @epc: the EPC device on which address is allocated
+ * @phys_addr: physical address of the local system
+ * @pci_addr: PCI address to which the physical address should be mapped
+ * @size: the size of the allocation
+ *
+ * Invoke to map CPU address with PCI address.
+ */
+int pci_epc_map_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+ u64 pci_addr, size_t size)
+{
+ int ret;
+ unsigned long flags;
+
+ if (IS_ERR(epc))
+ return -EINVAL;
+
+ if (!epc->ops->map_addr)
+ return 0;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ ret = epc->ops->map_addr(epc, phys_addr, pci_addr, size);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_map_addr);
+
+/**
+ * pci_epc_clear_bar() - reset the BAR
+ * @epc: the EPC device for which the BAR has to be cleared
+ * @bar: the BAR number that has to be reset
+ *
+ * Invoke to reset the BAR of the endpoint device.
+ */
+void pci_epc_clear_bar(struct pci_epc *epc, int bar)
+{
+ unsigned long flags;
+
+ if (IS_ERR(epc))
+ return;
+
+ if (!epc->ops->clear_bar)
+ return;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ epc->ops->clear_bar(epc, bar);
+ spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_clear_bar);
+
+/**
+ * pci_epc_set_bar() - configure BAR in order for host to assign PCI addr space
+ * @epc: the EPC device on which BAR has to be configured
+ * @bar: the BAR number that has to be configured
+ * @size: the size of the addr space
+ * @flags: specify memory allocation/io allocation/32bit address/64 bit address
+ *
+ * Invoke to configure the BAR of the endpoint device.
+ */
+int pci_epc_set_bar(struct pci_epc *epc, enum pci_barno bar,
+ dma_addr_t bar_phys, size_t size, int flags)
+{
+ int ret;
+ unsigned long irq_flags;
+
+ if (IS_ERR(epc))
+ return -EINVAL;
+
+ if (!epc->ops->set_bar)
+ return 0;
+
+ spin_lock_irqsave(&epc->lock, irq_flags);
+ ret = epc->ops->set_bar(epc, bar, bar_phys, size, flags);
+ spin_unlock_irqrestore(&epc->lock, irq_flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_bar);
+
+/**
+ * pci_epc_write_header() - write standard configuration header
+ * @epc: the EPC device to which the configuration header should be written
+ * @header: standard configuration header fields
+ *
+ * Invoke to write the configuration header to the endpoint controller. Every
+ * endpoint controller will have a dedicated location to which the standard
+ * configuration header would be written. The callback function should write
+ * the header fields to this dedicated location.
+ */
+int pci_epc_write_header(struct pci_epc *epc, struct pci_epf_header *header)
+{
+ int ret;
+ unsigned long flags;
+
+ if (IS_ERR(epc))
+ return -EINVAL;
+
+ if (!epc->ops->write_header)
+ return 0;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ ret = epc->ops->write_header(epc, header);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_write_header);
+
+/**
+ * pci_epc_add_epf() - bind PCI endpoint function to an endpoint controller
+ * @epc: the EPC device to which the endpoint function should be added
+ * @epf: the endpoint function to be added
+ *
+ * A PCI endpoint device can have one or more functions. In the case of PCIe,
+ * the specification allows up to 8 PCIe endpoint functions. Invoke
+ * pci_epc_add_epf() to add a PCI endpoint function to an endpoint controller.
+ */
+int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf)
+{
+ unsigned long flags;
+
+ if (epf->epc)
+ return -EBUSY;
+
+ if (IS_ERR(epc))
+ return -EINVAL;
+
+ if (epf->func_no > epc->max_functions - 1)
+ return -EINVAL;
+
+ epf->epc = epc;
+ dma_set_coherent_mask(&epf->dev, epc->dev.coherent_dma_mask);
+ epf->dev.dma_mask = epc->dev.dma_mask;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ list_add_tail(&epf->list, &epc->pci_epf);
+ spin_unlock_irqrestore(&epc->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_epc_add_epf);
+
+/**
+ * pci_epc_remove_epf() - remove PCI endpoint function from endpoint controller
+ * @epc: the EPC device from which the endpoint function should be removed
+ * @epf: the endpoint function to be removed
+ *
+ * Invoke to remove PCI endpoint function from the endpoint controller.
+ */
+void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf)
+{
+ unsigned long flags;
+
+ if (!epc || IS_ERR(epc))
+ return;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ list_del(&epf->list);
+ spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_remove_epf);
+
+/**
+ * pci_epc_linkup() - Notify the EPF device that EPC device has established a
+ * connection with the Root Complex.
+ * @epc: the EPC device which has established link with the host
+ *
+ * Invoke to Notify the EPF device that the EPC device has established a
+ * connection with the Root Complex.
+ */
+void pci_epc_linkup(struct pci_epc *epc)
+{
+ unsigned long flags;
+ struct pci_epf *epf;
+
+ if (!epc || IS_ERR(epc))
+ return;
+
+ spin_lock_irqsave(&epc->lock, flags);
+ list_for_each_entry(epf, &epc->pci_epf, list)
+ pci_epf_linkup(epf);
+ spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_linkup);
+
+/**
+ * pci_epc_destroy() - destroy the EPC device
+ * @epc: the EPC device that has to be destroyed
+ *
+ * Invoke to destroy the PCI EPC device
+ */
+void pci_epc_destroy(struct pci_epc *epc)
+{
+ pci_ep_cfs_remove_epc_group(epc->group);
+ device_unregister(&epc->dev);
+ kfree(epc);
+}
+EXPORT_SYMBOL_GPL(pci_epc_destroy);
+
+/**
+ * devm_pci_epc_destroy() - destroy the EPC device
+ * @dev: device that wants to destroy the EPC
+ * @epc: the EPC device that has to be destroyed
+ *
+ * Invoke to destroy the devres associated with this
+ * pci_epc and destroy the EPC device.
+ */
+void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc)
+{
+ int r;
+
+ r = devres_destroy(dev, devm_pci_epc_release, devm_pci_epc_match,
+ epc);
+ dev_WARN_ONCE(dev, r, "couldn't find PCI EPC resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_pci_epc_destroy);
+
+/**
+ * __pci_epc_create() - create a new endpoint controller (EPC) device
+ * @dev: device that is creating the new EPC
+ * @ops: function pointers for performing EPC operations
+ * @owner: the owner of the module that creates the EPC device
+ *
+ * Invoke to create a new EPC device and add it to pci_epc class.
+ */
+struct pci_epc *
+__pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+ struct module *owner)
+{
+ int ret;
+ struct pci_epc *epc;
+
+ if (WARN_ON(!dev)) {
+ ret = -EINVAL;
+ goto err_ret;
+ }
+
+ epc = kzalloc(sizeof(*epc), GFP_KERNEL);
+ if (!epc) {
+ ret = -ENOMEM;
+ goto err_ret;
+ }
+
+ spin_lock_init(&epc->lock);
+ INIT_LIST_HEAD(&epc->pci_epf);
+
+ device_initialize(&epc->dev);
+ dma_set_coherent_mask(&epc->dev, dev->coherent_dma_mask);
+ epc->dev.class = pci_epc_class;
+ epc->dev.dma_mask = dev->dma_mask;
+ epc->ops = ops;
+
+ ret = dev_set_name(&epc->dev, "%s", dev_name(dev));
+ if (ret)
+ goto put_dev;
+
+ ret = device_add(&epc->dev);
+ if (ret)
+ goto put_dev;
+
+ epc->group = pci_ep_cfs_add_epc_group(dev_name(dev));
+
+ return epc;
+
+put_dev:
+ put_device(&epc->dev);
+ kfree(epc);
+
+err_ret:
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(__pci_epc_create);
+
+/**
+ * __devm_pci_epc_create() - create a new endpoint controller (EPC) device
+ * @dev: device that is creating the new EPC
+ * @ops: function pointers for performing EPC operations
+ * @owner: the owner of the module that creates the EPC device
+ *
+ * Invoke to create a new EPC device and add it to pci_epc class.
+ * While at that, it also associates the device with the pci_epc using devres.
+ * On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ */
+struct pci_epc *
+__devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+ struct module *owner)
+{
+ struct pci_epc **ptr, *epc;
+
+ ptr = devres_alloc(devm_pci_epc_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ epc = __pci_epc_create(dev, ops, owner);
+ if (!IS_ERR(epc)) {
+ *ptr = epc;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
+
+ return epc;
+}
+EXPORT_SYMBOL_GPL(__devm_pci_epc_create);
+
+static int __init pci_epc_init(void)
+{
+ pci_epc_class = class_create(THIS_MODULE, "pci_epc");
+ if (IS_ERR(pci_epc_class)) {
+ pr_err("failed to create pci epc class --> %ld\n",
+ PTR_ERR(pci_epc_class));
+ return PTR_ERR(pci_epc_class);
+ }
+
+ return 0;
+}
+module_init(pci_epc_init);
+
+static void __exit pci_epc_exit(void)
+{
+ class_destroy(pci_epc_class);
+}
+module_exit(pci_epc_exit);
+
+MODULE_DESCRIPTION("PCI EPC Library");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/endpoint/pci-epc-mem.c b/drivers/pci/endpoint/pci-epc-mem.c
new file mode 100644
index 0000000..3a94cc1
--- /dev/null
+++ b/drivers/pci/endpoint/pci-epc-mem.c
@@ -0,0 +1,143 @@
+/**
+ * PCI Endpoint *Controller* Address Space Management
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/pci-epc.h>
+
+/**
+ * pci_epc_mem_init() - initialize the pci_epc_mem structure
+ * @epc: the EPC device that invoked pci_epc_mem_init
+ * @phys_base: the physical address of the base
+ * @size: the size of the address space
+ *
+ * Invoke to initialize the pci_epc_mem structure used by the
+ * endpoint functions to allocate mapped PCI address.
+ */
+int pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_base, size_t size)
+{
+ int ret;
+ struct pci_epc_mem *mem;
+ unsigned long *bitmap;
+ int pages = size >> PAGE_SHIFT;
+ int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
+
+ mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+ if (!mem) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+ if (!bitmap) {
+ ret = -ENOMEM;
+ goto err_mem;
+ }
+
+ mem->bitmap = bitmap;
+ mem->phys_base = phys_base;
+ mem->pages = pages;
+ mem->size = size;
+
+ epc->mem = mem;
+
+ return 0;
+
+err_mem:
+ kfree(mem);
+
+err:
+return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_init);
+
+/**
+ * pci_epc_mem_exit() - cleanup the pci_epc_mem structure
+ * @epc: the EPC device that invoked pci_epc_mem_exit
+ *
+ * Invoke to cleanup the pci_epc_mem structure allocated in
+ * pci_epc_mem_init().
+ */
+void pci_epc_mem_exit(struct pci_epc *epc)
+{
+ struct pci_epc_mem *mem = epc->mem;
+
+ epc->mem = NULL;
+ kfree(mem->bitmap);
+ kfree(mem);
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_exit);
+
+/**
+ * pci_epc_mem_alloc_addr() - allocate memory address from EPC addr space
+ * @epc: the EPC device on which memory has to be allocated
+ * @phys_addr: populate the allocated physical address here
+ * @size: the size of the address space that has to be allocated
+ *
+ * Invoke to allocate memory address from the EPC address space. This
+ * is usually done to map the remote RC address into the local system.
+ */
+void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
+ phys_addr_t *phys_addr, size_t size)
+{
+ int pageno;
+ void __iomem *virt_addr;
+ struct pci_epc_mem *mem = epc->mem;
+ int order = get_order(size);
+
+ pageno = bitmap_find_free_region(mem->bitmap, mem->pages, order);
+ if (pageno < 0)
+ return NULL;
+
+ *phys_addr = mem->phys_base + (pageno << PAGE_SHIFT);
+ virt_addr = ioremap(*phys_addr, size);
+ if (!virt_addr)
+ bitmap_release_region(mem->bitmap, pageno, order);
+
+ return virt_addr;
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_alloc_addr);
+
+/**
+ * pci_epc_mem_free_addr() - free the allocated memory address
+ * @epc: the EPC device on which memory was allocated
+ * @phys_addr: the allocated physical address
+ * @virt_addr: virtual address of the allocated mem space
+ * @size: the size of the allocated address space
+ *
+ * Invoke to free the memory allocated using pci_epc_mem_alloc_addr.
+ */
+void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+ void __iomem *virt_addr, size_t size)
+{
+ int pageno;
+ int order = get_order(size);
+ struct pci_epc_mem *mem = epc->mem;
+
+ iounmap(virt_addr);
+ pageno = (phys_addr - mem->phys_base) >> PAGE_SHIFT;
+ bitmap_release_region(mem->bitmap, pageno, order);
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_free_addr);
+
+MODULE_DESCRIPTION("PCI EPC Address Space Management");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
new file mode 100644
index 0000000..6877d6a
--- /dev/null
+++ b/drivers/pci/endpoint/pci-epf-core.c
@@ -0,0 +1,359 @@
+/**
+ * PCI Endpoint *Function* (EPF) library
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct bus_type pci_epf_bus_type;
+static struct device_type pci_epf_type;
+
+/**
+ * pci_epf_linkup() - Notify the function driver that EPC device has
+ * established a connection with the Root Complex.
+ * @epf: the EPF device bound to the EPC device which has established
+ * the connection with the host
+ *
+ * Invoke to notify the function driver that EPC device has established
+ * a connection with the Root Complex.
+ */
+void pci_epf_linkup(struct pci_epf *epf)
+{
+ if (!epf->driver) {
+ dev_WARN(&epf->dev, "epf device not bound to driver\n");
+ return;
+ }
+
+ epf->driver->ops->linkup(epf);
+}
+EXPORT_SYMBOL_GPL(pci_epf_linkup);
+
+/**
+ * pci_epf_unbind() - Notify the function driver that the binding between the
+ * EPF device and EPC device has been lost
+ * @epf: the EPF device which has lost the binding with the EPC device
+ *
+ * Invoke to notify the function driver that the binding between the EPF device
+ * and EPC device has been lost.
+ */
+void pci_epf_unbind(struct pci_epf *epf)
+{
+ if (!epf->driver) {
+ dev_WARN(&epf->dev, "epf device not bound to driver\n");
+ return;
+ }
+
+ epf->driver->ops->unbind(epf);
+ module_put(epf->driver->owner);
+}
+EXPORT_SYMBOL_GPL(pci_epf_unbind);
+
+/**
+ * pci_epf_bind() - Notify the function driver that the EPF device has been
+ * bound to a EPC device
+ * @epf: the EPF device which has been bound to the EPC device
+ *
+ * Invoke to notify the function driver that it has been bound to a EPC device
+ */
+int pci_epf_bind(struct pci_epf *epf)
+{
+ if (!epf->driver) {
+ dev_WARN(&epf->dev, "epf device not bound to driver\n");
+ return -EINVAL;
+ }
+
+ if (!try_module_get(epf->driver->owner))
+ return -EAGAIN;
+
+ return epf->driver->ops->bind(epf);
+}
+EXPORT_SYMBOL_GPL(pci_epf_bind);
+
+/**
+ * pci_epf_free_space() - free the allocated PCI EPF register space
+ * @addr: the virtual address of the PCI EPF register space
+ * @bar: the BAR number corresponding to the register space
+ *
+ * Invoke to free the allocated PCI EPF register space.
+ */
+void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar)
+{
+ struct device *dev = &epf->dev;
+
+ if (!addr)
+ return;
+
+ dma_free_coherent(dev, epf->bar[bar].size, addr,
+ epf->bar[bar].phys_addr);
+
+ epf->bar[bar].phys_addr = 0;
+ epf->bar[bar].size = 0;
+}
+EXPORT_SYMBOL_GPL(pci_epf_free_space);
+
+/**
+ * pci_epf_alloc_space() - allocate memory for the PCI EPF register space
+ * @size: the size of the memory that has to be allocated
+ * @bar: the BAR number corresponding to the allocated register space
+ *
+ * Invoke to allocate memory for the PCI EPF register space.
+ */
+void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar)
+{
+ void *space;
+ struct device *dev = &epf->dev;
+ dma_addr_t phys_addr;
+
+ if (size < 128)
+ size = 128;
+ size = roundup_pow_of_two(size);
+
+ space = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+ if (!space) {
+ dev_err(dev, "failed to allocate mem space\n");
+ return NULL;
+ }
+
+ epf->bar[bar].phys_addr = phys_addr;
+ epf->bar[bar].size = size;
+
+ return space;
+}
+EXPORT_SYMBOL_GPL(pci_epf_alloc_space);
+
+/**
+ * pci_epf_unregister_driver() - unregister the PCI EPF driver
+ * @driver: the PCI EPF driver that has to be unregistered
+ *
+ * Invoke to unregister the PCI EPF driver.
+ */
+void pci_epf_unregister_driver(struct pci_epf_driver *driver)
+{
+ pci_ep_cfs_remove_epf_group(driver->group);
+ driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL_GPL(pci_epf_unregister_driver);
+
+/**
+ * __pci_epf_register_driver() - register a new PCI EPF driver
+ * @driver: structure representing PCI EPF driver
+ * @owner: the owner of the module that registers the PCI EPF driver
+ *
+ * Invoke to register a new PCI EPF driver.
+ */
+int __pci_epf_register_driver(struct pci_epf_driver *driver,
+ struct module *owner)
+{
+ int ret;
+
+ if (!driver->ops)
+ return -EINVAL;
+
+ if (!driver->ops->bind || !driver->ops->unbind || !driver->ops->linkup)
+ return -EINVAL;
+
+ driver->driver.bus = &pci_epf_bus_type;
+ driver->driver.owner = owner;
+
+ ret = driver_register(&driver->driver);
+ if (ret)
+ return ret;
+
+ driver->group = pci_ep_cfs_add_epf_group(driver->driver.name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__pci_epf_register_driver);
+
+/**
+ * pci_epf_destroy() - destroy the created PCI EPF device
+ * @epf: the PCI EPF device that has to be destroyed.
+ *
+ * Invoke to destroy the PCI EPF device created by invoking pci_epf_create().
+ */
+void pci_epf_destroy(struct pci_epf *epf)
+{
+ device_unregister(&epf->dev);
+}
+EXPORT_SYMBOL_GPL(pci_epf_destroy);
+
+/**
+ * pci_epf_create() - create a new PCI EPF device
+ * @name: the name of the PCI EPF device. This name will be used to bind the
+ * the EPF device to a EPF driver
+ *
+ * Invoke to create a new PCI EPF device by providing the name of the function
+ * device.
+ */
+struct pci_epf *pci_epf_create(const char *name)
+{
+ int ret;
+ struct pci_epf *epf;
+ struct device *dev;
+ char *func_name;
+ char *buf;
+
+ epf = kzalloc(sizeof(*epf), GFP_KERNEL);
+ if (!epf) {
+ ret = -ENOMEM;
+ goto err_ret;
+ }
+
+ buf = kstrdup(name, GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto free_epf;
+ }
+
+ func_name = buf;
+ buf = strchrnul(buf, '.');
+ *buf = '\0';
+
+ epf->name = kstrdup(func_name, GFP_KERNEL);
+ if (!epf->name) {
+ ret = -ENOMEM;
+ goto free_func_name;
+ }
+
+ dev = &epf->dev;
+ device_initialize(dev);
+ dev->bus = &pci_epf_bus_type;
+ dev->type = &pci_epf_type;
+
+ ret = dev_set_name(dev, "%s", name);
+ if (ret)
+ goto put_dev;
+
+ ret = device_add(dev);
+ if (ret)
+ goto put_dev;
+
+ kfree(func_name);
+ return epf;
+
+put_dev:
+ put_device(dev);
+ kfree(epf->name);
+
+free_func_name:
+ kfree(func_name);
+
+free_epf:
+ kfree(epf);
+
+err_ret:
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pci_epf_create);
+
+static void pci_epf_dev_release(struct device *dev)
+{
+ struct pci_epf *epf = to_pci_epf(dev);
+
+ kfree(epf->name);
+ kfree(epf);
+}
+
+static struct device_type pci_epf_type = {
+ .release = pci_epf_dev_release,
+};
+
+static int
+pci_epf_match_id(const struct pci_epf_device_id *id, const struct pci_epf *epf)
+{
+ while (id->name[0]) {
+ if (strcmp(epf->name, id->name) == 0)
+ return true;
+ id++;
+ }
+
+ return false;
+}
+
+static int pci_epf_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct pci_epf *epf = to_pci_epf(dev);
+ struct pci_epf_driver *driver = to_pci_epf_driver(drv);
+
+ if (driver->id_table)
+ return pci_epf_match_id(driver->id_table, epf);
+
+ return !strcmp(epf->name, drv->name);
+}
+
+static int pci_epf_device_probe(struct device *dev)
+{
+ struct pci_epf *epf = to_pci_epf(dev);
+ struct pci_epf_driver *driver = to_pci_epf_driver(dev->driver);
+
+ if (!driver->probe)
+ return -ENODEV;
+
+ epf->driver = driver;
+
+ return driver->probe(epf);
+}
+
+static int pci_epf_device_remove(struct device *dev)
+{
+ int ret;
+ struct pci_epf *epf = to_pci_epf(dev);
+ struct pci_epf_driver *driver = to_pci_epf_driver(dev->driver);
+
+ ret = driver->remove(epf);
+ epf->driver = NULL;
+
+ return ret;
+}
+
+static struct bus_type pci_epf_bus_type = {
+ .name = "pci-epf",
+ .match = pci_epf_device_match,
+ .probe = pci_epf_device_probe,
+ .remove = pci_epf_device_remove,
+};
+
+static int __init pci_epf_init(void)
+{
+ int ret;
+
+ ret = bus_register(&pci_epf_bus_type);
+ if (ret) {
+ pr_err("failed to register pci epf bus --> %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+module_init(pci_epf_init);
+
+static void __exit pci_epf_exit(void)
+{
+ bus_unregister(&pci_epf_bus_type);
+}
+module_exit(pci_epf_exit);
+
+MODULE_DESCRIPTION("PCI EPF Library");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index f7c1d4d..7f47cd5 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -27,6 +27,12 @@
or End Point. The current option selection will only
support root port enabling.
+config PCI_FTPCI100
+ bool "Faraday Technology FTPCI100 PCI controller"
+ depends on OF
+ depends on ARM
+ default ARCH_GEMINI
+
config PCI_TEGRA
bool "NVIDIA Tegra PCIe controller"
depends on ARCH_TEGRA
@@ -95,6 +101,7 @@
config PCIE_IPROC
tristate
+ select PCI_DOMAINS
help
This enables the iProc PCIe core controller support for Broadcom's
iProc family of SoCs. An appropriate bus interface driver needs
@@ -115,7 +122,6 @@
depends on ARM && (ARCH_BCM_IPROC || COMPILE_TEST)
select PCIE_IPROC
select BCMA
- select PCI_DOMAINS
default ARCH_BCM_5301X
help
Say Y here if you want to use the Broadcom iProc PCIe controller
@@ -164,7 +170,7 @@
Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
config PCIE_ROCKCHIP
- bool "Rockchip PCIe controller"
+ tristate "Rockchip PCIe controller"
depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on OF
depends on PCI_MSI_IRQ_DOMAIN
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 4d36866..cab8795 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index 4fce494..37d0bcd 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -200,10 +200,12 @@ struct advk_pcie {
struct list_head resources;
struct irq_domain *irq_domain;
struct irq_chip irq_chip;
- struct msi_controller msi;
struct irq_domain *msi_domain;
+ struct irq_domain *msi_inner_domain;
+ struct irq_chip msi_bottom_irq_chip;
struct irq_chip msi_irq_chip;
- DECLARE_BITMAP(msi_irq_in_use, MSI_IRQ_NUM);
+ struct msi_domain_info msi_domain_info;
+ DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
struct mutex msi_used_lock;
u16 msi_msg;
int root_bus_nr;
@@ -545,94 +547,64 @@ static struct pci_ops advk_pcie_ops = {
.write = advk_pcie_wr_conf,
};
-static int advk_pcie_alloc_msi(struct advk_pcie *pcie)
+static void advk_msi_irq_compose_msi_msg(struct irq_data *data,
+ struct msi_msg *msg)
{
- int hwirq;
+ struct advk_pcie *pcie = irq_data_get_irq_chip_data(data);
+ phys_addr_t msi_msg = virt_to_phys(&pcie->msi_msg);
+
+ msg->address_lo = lower_32_bits(msi_msg);
+ msg->address_hi = upper_32_bits(msi_msg);
+ msg->data = data->irq;
+}
+
+static int advk_msi_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
+{
+ return -EINVAL;
+}
+
+static int advk_msi_irq_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs, void *args)
+{
+ struct advk_pcie *pcie = domain->host_data;
+ int hwirq, i;
mutex_lock(&pcie->msi_used_lock);
- hwirq = find_first_zero_bit(pcie->msi_irq_in_use, MSI_IRQ_NUM);
- if (hwirq >= MSI_IRQ_NUM)
- hwirq = -ENOSPC;
- else
- set_bit(hwirq, pcie->msi_irq_in_use);
+ hwirq = bitmap_find_next_zero_area(pcie->msi_used, MSI_IRQ_NUM,
+ 0, nr_irqs, 0);
+ if (hwirq >= MSI_IRQ_NUM) {
+ mutex_unlock(&pcie->msi_used_lock);
+ return -ENOSPC;
+ }
+
+ bitmap_set(pcie->msi_used, hwirq, nr_irqs);
mutex_unlock(&pcie->msi_used_lock);
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_info(domain, virq + i, hwirq + i,
+ &pcie->msi_bottom_irq_chip,
+ domain->host_data, handle_simple_irq,
+ NULL, NULL);
+
return hwirq;
}
-static void advk_pcie_free_msi(struct advk_pcie *pcie, int hwirq)
+static void advk_msi_irq_domain_free(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs)
{
- struct device *dev = &pcie->pdev->dev;
+ struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+ struct advk_pcie *pcie = domain->host_data;
mutex_lock(&pcie->msi_used_lock);
- if (!test_bit(hwirq, pcie->msi_irq_in_use))
- dev_err(dev, "trying to free unused MSI#%d\n", hwirq);
- else
- clear_bit(hwirq, pcie->msi_irq_in_use);
+ bitmap_clear(pcie->msi_used, d->hwirq, nr_irqs);
mutex_unlock(&pcie->msi_used_lock);
}
-static int advk_pcie_setup_msi_irq(struct msi_controller *chip,
- struct pci_dev *pdev,
- struct msi_desc *desc)
-{
- struct advk_pcie *pcie = pdev->bus->sysdata;
- struct msi_msg msg;
- int virq, hwirq;
- phys_addr_t msi_msg_phys;
-
- /* We support MSI, but not MSI-X */
- if (desc->msi_attrib.is_msix)
- return -EINVAL;
-
- hwirq = advk_pcie_alloc_msi(pcie);
- if (hwirq < 0)
- return hwirq;
-
- virq = irq_create_mapping(pcie->msi_domain, hwirq);
- if (!virq) {
- advk_pcie_free_msi(pcie, hwirq);
- return -EINVAL;
- }
-
- irq_set_msi_desc(virq, desc);
-
- msi_msg_phys = virt_to_phys(&pcie->msi_msg);
-
- msg.address_lo = lower_32_bits(msi_msg_phys);
- msg.address_hi = upper_32_bits(msi_msg_phys);
- msg.data = virq;
-
- pci_write_msi_msg(virq, &msg);
-
- return 0;
-}
-
-static void advk_pcie_teardown_msi_irq(struct msi_controller *chip,
- unsigned int irq)
-{
- struct irq_data *d = irq_get_irq_data(irq);
- struct msi_desc *msi = irq_data_get_msi_desc(d);
- struct advk_pcie *pcie = msi_desc_to_pci_sysdata(msi);
- unsigned long hwirq = d->hwirq;
-
- irq_dispose_mapping(irq);
- advk_pcie_free_msi(pcie, hwirq);
-}
-
-static int advk_pcie_msi_map(struct irq_domain *domain,
- unsigned int virq, irq_hw_number_t hw)
-{
- struct advk_pcie *pcie = domain->host_data;
-
- irq_set_chip_and_handler(virq, &pcie->msi_irq_chip,
- handle_simple_irq);
-
- return 0;
-}
-
-static const struct irq_domain_ops advk_pcie_msi_irq_ops = {
- .map = advk_pcie_msi_map,
+static const struct irq_domain_ops advk_msi_domain_ops = {
+ .alloc = advk_msi_irq_domain_alloc,
+ .free = advk_msi_irq_domain_free,
};
static void advk_pcie_irq_mask(struct irq_data *d)
@@ -680,31 +652,26 @@ static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
{
struct device *dev = &pcie->pdev->dev;
struct device_node *node = dev->of_node;
- struct irq_chip *msi_irq_chip;
- struct msi_controller *msi;
+ struct irq_chip *bottom_ic, *msi_ic;
+ struct msi_domain_info *msi_di;
phys_addr_t msi_msg_phys;
- int ret;
-
- msi_irq_chip = &pcie->msi_irq_chip;
-
- msi_irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-msi",
- dev_name(dev));
- if (!msi_irq_chip->name)
- return -ENOMEM;
-
- msi_irq_chip->irq_enable = pci_msi_unmask_irq;
- msi_irq_chip->irq_disable = pci_msi_mask_irq;
- msi_irq_chip->irq_mask = pci_msi_mask_irq;
- msi_irq_chip->irq_unmask = pci_msi_unmask_irq;
-
- msi = &pcie->msi;
-
- msi->setup_irq = advk_pcie_setup_msi_irq;
- msi->teardown_irq = advk_pcie_teardown_msi_irq;
- msi->of_node = node;
mutex_init(&pcie->msi_used_lock);
+ bottom_ic = &pcie->msi_bottom_irq_chip;
+
+ bottom_ic->name = "MSI";
+ bottom_ic->irq_compose_msi_msg = advk_msi_irq_compose_msi_msg;
+ bottom_ic->irq_set_affinity = advk_msi_set_affinity;
+
+ msi_ic = &pcie->msi_irq_chip;
+ msi_ic->name = "advk-MSI";
+
+ msi_di = &pcie->msi_domain_info;
+ msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+ MSI_FLAG_MULTI_PCI_MSI;
+ msi_di->chip = msi_ic;
+
msi_msg_phys = virt_to_phys(&pcie->msi_msg);
advk_writel(pcie, lower_32_bits(msi_msg_phys),
@@ -712,16 +679,18 @@ static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
advk_writel(pcie, upper_32_bits(msi_msg_phys),
PCIE_MSI_ADDR_HIGH_REG);
- pcie->msi_domain =
+ pcie->msi_inner_domain =
irq_domain_add_linear(NULL, MSI_IRQ_NUM,
- &advk_pcie_msi_irq_ops, pcie);
- if (!pcie->msi_domain)
+ &advk_msi_domain_ops, pcie);
+ if (!pcie->msi_inner_domain)
return -ENOMEM;
- ret = of_pci_msi_chip_add(msi);
- if (ret < 0) {
- irq_domain_remove(pcie->msi_domain);
- return ret;
+ pcie->msi_domain =
+ pci_msi_create_irq_domain(of_node_to_fwnode(node),
+ msi_di, pcie->msi_inner_domain);
+ if (!pcie->msi_domain) {
+ irq_domain_remove(pcie->msi_inner_domain);
+ return -ENOMEM;
}
return 0;
@@ -729,8 +698,8 @@ static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
static void advk_pcie_remove_msi_irq_domain(struct advk_pcie *pcie)
{
- of_pci_msi_chip_remove(&pcie->msi);
irq_domain_remove(pcie->msi_domain);
+ irq_domain_remove(pcie->msi_inner_domain);
}
static int advk_pcie_init_irq_domain(struct advk_pcie *pcie)
@@ -917,8 +886,6 @@ static int advk_pcie_probe(struct platform_device *pdev)
struct advk_pcie *pcie;
struct resource *res;
struct pci_bus *bus, *child;
- struct msi_controller *msi;
- struct device_node *msi_node;
int ret, irq;
pcie = devm_kzalloc(dev, sizeof(struct advk_pcie), GFP_KERNEL);
@@ -962,14 +929,8 @@ static int advk_pcie_probe(struct platform_device *pdev)
return ret;
}
- msi_node = of_parse_phandle(dev->of_node, "msi-parent", 0);
- if (msi_node)
- msi = of_pci_find_msi_chip_by_node(msi_node);
- else
- msi = NULL;
-
- bus = pci_scan_root_bus_msi(dev, 0, &advk_pcie_ops,
- pcie, &pcie->resources, &pcie->msi);
+ bus = pci_scan_root_bus(dev, 0, &advk_pcie_ops,
+ pcie, &pcie->resources);
if (!bus) {
advk_pcie_remove_msi_irq_domain(pcie);
advk_pcie_remove_irq_domain(pcie);
diff --git a/drivers/pci/host/pci-ftpci100.c b/drivers/pci/host/pci-ftpci100.c
new file mode 100644
index 0000000..d26501c
--- /dev/null
+++ b/drivers/pci/host/pci-ftpci100.c
@@ -0,0 +1,563 @@
+/*
+ * Support for Faraday Technology FTPC100 PCI Controller
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the out-of-tree OpenWRT patch for Cortina Gemini:
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Based on SL2312 PCI controller code
+ * Storlink (C) 2003
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+
+/*
+ * Special configuration registers directly in the first few words
+ * in I/O space.
+ */
+#define PCI_IOSIZE 0x00
+#define PCI_PROT 0x04 /* AHB protection */
+#define PCI_CTRL 0x08 /* PCI control signal */
+#define PCI_SOFTRST 0x10 /* Soft reset counter and response error enable */
+#define PCI_CONFIG 0x28 /* PCI configuration command register */
+#define PCI_DATA 0x2C
+
+#define FARADAY_PCI_PMC 0x40 /* Power management control */
+#define FARADAY_PCI_PMCSR 0x44 /* Power management status */
+#define FARADAY_PCI_CTRL1 0x48 /* Control register 1 */
+#define FARADAY_PCI_CTRL2 0x4C /* Control register 2 */
+#define FARADAY_PCI_MEM1_BASE_SIZE 0x50 /* Memory base and size #1 */
+#define FARADAY_PCI_MEM2_BASE_SIZE 0x54 /* Memory base and size #2 */
+#define FARADAY_PCI_MEM3_BASE_SIZE 0x58 /* Memory base and size #3 */
+
+/* Bits 31..28 gives INTD..INTA status */
+#define PCI_CTRL2_INTSTS_SHIFT 28
+#define PCI_CTRL2_INTMASK_CMDERR BIT(27)
+#define PCI_CTRL2_INTMASK_PARERR BIT(26)
+/* Bits 25..22 masks INTD..INTA */
+#define PCI_CTRL2_INTMASK_SHIFT 22
+#define PCI_CTRL2_INTMASK_MABRT_RX BIT(21)
+#define PCI_CTRL2_INTMASK_TABRT_RX BIT(20)
+#define PCI_CTRL2_INTMASK_TABRT_TX BIT(19)
+#define PCI_CTRL2_INTMASK_RETRY4 BIT(18)
+#define PCI_CTRL2_INTMASK_SERR_RX BIT(17)
+#define PCI_CTRL2_INTMASK_PERR_RX BIT(16)
+/* Bit 15 reserved */
+#define PCI_CTRL2_MSTPRI_REQ6 BIT(14)
+#define PCI_CTRL2_MSTPRI_REQ5 BIT(13)
+#define PCI_CTRL2_MSTPRI_REQ4 BIT(12)
+#define PCI_CTRL2_MSTPRI_REQ3 BIT(11)
+#define PCI_CTRL2_MSTPRI_REQ2 BIT(10)
+#define PCI_CTRL2_MSTPRI_REQ1 BIT(9)
+#define PCI_CTRL2_MSTPRI_REQ0 BIT(8)
+/* Bits 7..4 reserved */
+/* Bits 3..0 TRDYW */
+
+/*
+ * Memory configs:
+ * Bit 31..20 defines the PCI side memory base
+ * Bit 19..16 (4 bits) defines the size per below
+ */
+#define FARADAY_PCI_MEMBASE_MASK 0xfff00000
+#define FARADAY_PCI_MEMSIZE_1MB 0x0
+#define FARADAY_PCI_MEMSIZE_2MB 0x1
+#define FARADAY_PCI_MEMSIZE_4MB 0x2
+#define FARADAY_PCI_MEMSIZE_8MB 0x3
+#define FARADAY_PCI_MEMSIZE_16MB 0x4
+#define FARADAY_PCI_MEMSIZE_32MB 0x5
+#define FARADAY_PCI_MEMSIZE_64MB 0x6
+#define FARADAY_PCI_MEMSIZE_128MB 0x7
+#define FARADAY_PCI_MEMSIZE_256MB 0x8
+#define FARADAY_PCI_MEMSIZE_512MB 0x9
+#define FARADAY_PCI_MEMSIZE_1GB 0xa
+#define FARADAY_PCI_MEMSIZE_2GB 0xb
+#define FARADAY_PCI_MEMSIZE_SHIFT 16
+
+/*
+ * The DMA base is set to 0x0 for all memory segments, it reflects the
+ * fact that the memory of the host system starts at 0x0.
+ */
+#define FARADAY_PCI_DMA_MEM1_BASE 0x00000000
+#define FARADAY_PCI_DMA_MEM2_BASE 0x00000000
+#define FARADAY_PCI_DMA_MEM3_BASE 0x00000000
+
+/* Defines for PCI configuration command register */
+#define PCI_CONF_ENABLE BIT(31)
+#define PCI_CONF_WHERE(r) ((r) & 0xFC)
+#define PCI_CONF_BUS(b) (((b) & 0xFF) << 16)
+#define PCI_CONF_DEVICE(d) (((d) & 0x1F) << 11)
+#define PCI_CONF_FUNCTION(f) (((f) & 0x07) << 8)
+
+/**
+ * struct faraday_pci_variant - encodes IP block differences
+ * @cascaded_irq: this host has cascaded IRQs from an interrupt controller
+ * embedded in the host bridge.
+ */
+struct faraday_pci_variant {
+ bool cascaded_irq;
+};
+
+struct faraday_pci {
+ struct device *dev;
+ void __iomem *base;
+ struct irq_domain *irqdomain;
+ struct pci_bus *bus;
+};
+
+static int faraday_res_to_memcfg(resource_size_t mem_base,
+ resource_size_t mem_size, u32 *val)
+{
+ u32 outval;
+
+ switch (mem_size) {
+ case SZ_1M:
+ outval = FARADAY_PCI_MEMSIZE_1MB;
+ break;
+ case SZ_2M:
+ outval = FARADAY_PCI_MEMSIZE_2MB;
+ break;
+ case SZ_4M:
+ outval = FARADAY_PCI_MEMSIZE_4MB;
+ break;
+ case SZ_8M:
+ outval = FARADAY_PCI_MEMSIZE_8MB;
+ break;
+ case SZ_16M:
+ outval = FARADAY_PCI_MEMSIZE_16MB;
+ break;
+ case SZ_32M:
+ outval = FARADAY_PCI_MEMSIZE_32MB;
+ break;
+ case SZ_64M:
+ outval = FARADAY_PCI_MEMSIZE_64MB;
+ break;
+ case SZ_128M:
+ outval = FARADAY_PCI_MEMSIZE_128MB;
+ break;
+ case SZ_256M:
+ outval = FARADAY_PCI_MEMSIZE_256MB;
+ break;
+ case SZ_512M:
+ outval = FARADAY_PCI_MEMSIZE_512MB;
+ break;
+ case SZ_1G:
+ outval = FARADAY_PCI_MEMSIZE_1GB;
+ break;
+ case SZ_2G:
+ outval = FARADAY_PCI_MEMSIZE_2GB;
+ break;
+ default:
+ return -EINVAL;
+ }
+ outval <<= FARADAY_PCI_MEMSIZE_SHIFT;
+
+ /* This is probably not good */
+ if (mem_base & ~(FARADAY_PCI_MEMBASE_MASK))
+ pr_warn("truncated PCI memory base\n");
+ /* Translate to bridge side address space */
+ outval |= (mem_base & FARADAY_PCI_MEMBASE_MASK);
+ pr_debug("Translated pci base @%pap, size %pap to config %08x\n",
+ &mem_base, &mem_size, outval);
+
+ *val = outval;
+ return 0;
+}
+
+static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
+ int config, int size, u32 *value)
+{
+ struct faraday_pci *p = bus->sysdata;
+
+ writel(PCI_CONF_BUS(bus->number) |
+ PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+ PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+ PCI_CONF_WHERE(config) |
+ PCI_CONF_ENABLE,
+ p->base + PCI_CONFIG);
+
+ *value = readl(p->base + PCI_DATA);
+
+ if (size == 1)
+ *value = (*value >> (8 * (config & 3))) & 0xFF;
+ else if (size == 2)
+ *value = (*value >> (8 * (config & 3))) & 0xFFFF;
+
+ dev_dbg(&bus->dev,
+ "[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+ PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int faraday_pci_write_config(struct pci_bus *bus, unsigned int fn,
+ int config, int size, u32 value)
+{
+ struct faraday_pci *p = bus->sysdata;
+ int ret = PCIBIOS_SUCCESSFUL;
+
+ dev_dbg(&bus->dev,
+ "[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+ PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
+
+ writel(PCI_CONF_BUS(bus->number) |
+ PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+ PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+ PCI_CONF_WHERE(config) |
+ PCI_CONF_ENABLE,
+ p->base + PCI_CONFIG);
+
+ switch (size) {
+ case 4:
+ writel(value, p->base + PCI_DATA);
+ break;
+ case 2:
+ writew(value, p->base + PCI_DATA + (config & 3));
+ break;
+ case 1:
+ writeb(value, p->base + PCI_DATA + (config & 3));
+ break;
+ default:
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ return ret;
+}
+
+static struct pci_ops faraday_pci_ops = {
+ .read = faraday_pci_read_config,
+ .write = faraday_pci_write_config,
+};
+
+static void faraday_pci_ack_irq(struct irq_data *d)
+{
+ struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+ unsigned int reg;
+
+ faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, ®);
+ reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+ reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
+ faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_mask_irq(struct irq_data *d)
+{
+ struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+ unsigned int reg;
+
+ faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, ®);
+ reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
+ | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
+ faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_unmask_irq(struct irq_data *d)
+{
+ struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+ unsigned int reg;
+
+ faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, ®);
+ reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+ reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
+ faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_irq_handler(struct irq_desc *desc)
+{
+ struct faraday_pci *p = irq_desc_get_handler_data(desc);
+ struct irq_chip *irqchip = irq_desc_get_chip(desc);
+ unsigned int irq_stat, reg, i;
+
+ faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, ®);
+ irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
+
+ chained_irq_enter(irqchip, desc);
+
+ for (i = 0; i < 4; i++) {
+ if ((irq_stat & BIT(i)) == 0)
+ continue;
+ generic_handle_irq(irq_find_mapping(p->irqdomain, i));
+ }
+
+ chained_irq_exit(irqchip, desc);
+}
+
+static struct irq_chip faraday_pci_irq_chip = {
+ .name = "PCI",
+ .irq_ack = faraday_pci_ack_irq,
+ .irq_mask = faraday_pci_mask_irq,
+ .irq_unmask = faraday_pci_unmask_irq,
+};
+
+static int faraday_pci_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &faraday_pci_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops faraday_pci_irqdomain_ops = {
+ .map = faraday_pci_irq_map,
+};
+
+static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p)
+{
+ struct device_node *intc = of_get_next_child(p->dev->of_node, NULL);
+ int irq;
+ int i;
+
+ if (!intc) {
+ dev_err(p->dev, "missing child interrupt-controller node\n");
+ return -EINVAL;
+ }
+
+ /* All PCI IRQs cascade off this one */
+ irq = of_irq_get(intc, 0);
+ if (!irq) {
+ dev_err(p->dev, "failed to get parent IRQ\n");
+ return -EINVAL;
+ }
+
+ p->irqdomain = irq_domain_add_linear(intc, 4,
+ &faraday_pci_irqdomain_ops, p);
+ if (!p->irqdomain) {
+ dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n");
+ return -EINVAL;
+ }
+
+ irq_set_chained_handler_and_data(irq, faraday_pci_irq_handler, p);
+
+ for (i = 0; i < 4; i++)
+ irq_create_mapping(p->irqdomain, i);
+
+ return 0;
+}
+
+static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
+ struct device_node *node)
+{
+ const int na = 3, ns = 2;
+ int rlen;
+
+ parser->node = node;
+ parser->pna = of_n_addr_cells(node);
+ parser->np = parser->pna + na + ns;
+
+ parser->range = of_get_property(node, "dma-ranges", &rlen);
+ if (!parser->range)
+ return -ENOENT;
+ parser->end = parser->range + rlen / sizeof(__be32);
+
+ return 0;
+}
+
+static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p,
+ struct device_node *np)
+{
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+ struct device *dev = p->dev;
+ u32 confreg[3] = {
+ FARADAY_PCI_MEM1_BASE_SIZE,
+ FARADAY_PCI_MEM2_BASE_SIZE,
+ FARADAY_PCI_MEM3_BASE_SIZE,
+ };
+ int i = 0;
+ u32 val;
+
+ if (pci_dma_range_parser_init(&parser, np)) {
+ dev_err(dev, "missing dma-ranges property\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get the dma-ranges from the device tree
+ */
+ for_each_of_pci_range(&parser, &range) {
+ u64 end = range.pci_addr + range.size - 1;
+ int ret;
+
+ ret = faraday_res_to_memcfg(range.pci_addr, range.size, &val);
+ if (ret) {
+ dev_err(dev,
+ "DMA range %d: illegal MEM resource size\n", i);
+ return -EINVAL;
+ }
+
+ dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n",
+ i + 1, range.pci_addr, end, val);
+ if (i <= 2) {
+ faraday_pci_write_config(p->bus, 0, confreg[i],
+ 4, val);
+ } else {
+ dev_err(dev, "ignore extraneous dma-range %d\n", i);
+ break;
+ }
+
+ i++;
+ }
+
+ return 0;
+}
+
+static int faraday_pci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct faraday_pci_variant *variant =
+ of_device_get_match_data(dev);
+ struct resource *regs;
+ resource_size_t io_base;
+ struct resource_entry *win;
+ struct faraday_pci *p;
+ struct resource *mem;
+ struct resource *io;
+ struct pci_host_bridge *host;
+ int ret;
+ u32 val;
+ LIST_HEAD(res);
+
+ host = pci_alloc_host_bridge(sizeof(*p));
+ if (!host)
+ return -ENOMEM;
+
+ host->dev.parent = dev;
+ host->ops = &faraday_pci_ops;
+ host->busnr = 0;
+ host->msi = NULL;
+ p = pci_host_bridge_priv(host);
+ host->sysdata = p;
+ p->dev = dev;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ p->base = devm_ioremap_resource(dev, regs);
+ if (IS_ERR(p->base))
+ return PTR_ERR(p->base);
+
+ ret = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
+ &res, &io_base);
+ if (ret)
+ return ret;
+
+ ret = devm_request_pci_bus_resources(dev, &res);
+ if (ret)
+ return ret;
+
+ /* Get the I/O and memory ranges from DT */
+ resource_list_for_each_entry(win, &res) {
+ switch (resource_type(win->res)) {
+ case IORESOURCE_IO:
+ io = win->res;
+ io->name = "Gemini PCI I/O";
+ if (!faraday_res_to_memcfg(io->start - win->offset,
+ resource_size(io), &val)) {
+ /* setup I/O space size */
+ writel(val, p->base + PCI_IOSIZE);
+ } else {
+ dev_err(dev, "illegal IO mem size\n");
+ return -EINVAL;
+ }
+ ret = pci_remap_iospace(io, io_base);
+ if (ret) {
+ dev_warn(dev, "error %d: failed to map resource %pR\n",
+ ret, io);
+ continue;
+ }
+ break;
+ case IORESOURCE_MEM:
+ mem = win->res;
+ mem->name = "Gemini PCI MEM";
+ break;
+ case IORESOURCE_BUS:
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Setup hostbridge */
+ val = readl(p->base + PCI_CTRL);
+ val |= PCI_COMMAND_IO;
+ val |= PCI_COMMAND_MEMORY;
+ val |= PCI_COMMAND_MASTER;
+ writel(val, p->base + PCI_CTRL);
+
+ list_splice_init(&res, &host->windows);
+ ret = pci_register_host_bridge(host);
+ if (ret) {
+ dev_err(dev, "failed to register host: %d\n", ret);
+ return ret;
+ }
+ p->bus = host->bus;
+
+ /* Mask and clear all interrupts */
+ faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
+ if (variant->cascaded_irq) {
+ ret = faraday_pci_setup_cascaded_irq(p);
+ if (ret) {
+ dev_err(dev, "failed to setup cascaded IRQ\n");
+ return ret;
+ }
+ }
+
+ ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node);
+ if (ret)
+ return ret;
+
+ pci_scan_child_bus(p->bus);
+ pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+ pci_bus_assign_resources(p->bus);
+ pci_bus_add_devices(p->bus);
+ pci_free_resource_list(&res);
+
+ return 0;
+}
+
+/*
+ * We encode bridge variants here, we have at least two so it doesn't
+ * hurt to have infrastructure to encompass future variants as well.
+ */
+const struct faraday_pci_variant faraday_regular = {
+ .cascaded_irq = true,
+};
+
+const struct faraday_pci_variant faraday_dual = {
+ .cascaded_irq = false,
+};
+
+static const struct of_device_id faraday_pci_of_match[] = {
+ {
+ .compatible = "faraday,ftpci100",
+ .data = &faraday_regular,
+ },
+ {
+ .compatible = "faraday,ftpci100-dual",
+ .data = &faraday_dual,
+ },
+ {},
+};
+
+static struct platform_driver faraday_pci_driver = {
+ .driver = {
+ .name = "ftpci100",
+ .of_match_table = of_match_ptr(faraday_pci_of_match),
+ .suppress_bind_attrs = true,
+ },
+ .probe = faraday_pci_probe,
+};
+builtin_platform_driver(faraday_pci_driver);
diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
index c05ea9d..7d709a7 100644
--- a/drivers/pci/host/pci-host-generic.c
+++ b/drivers/pci/host/pci-host-generic.c
@@ -60,6 +60,7 @@ static struct platform_driver gen_pci_driver = {
.driver = {
.name = "pci-host-generic",
.of_match_table = gen_pci_of_match,
+ .suppress_bind_attrs = true,
},
.probe = gen_pci_probe,
};
diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index ada9856..8493638 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -56,6 +56,7 @@
#include <asm/apic.h>
#include <linux/msi.h>
#include <linux/hyperv.h>
+#include <linux/refcount.h>
#include <asm/mshyperv.h>
/*
@@ -72,6 +73,7 @@ enum {
PCI_PROTOCOL_VERSION_CURRENT = PCI_PROTOCOL_VERSION_1_1
};
+#define CPU_AFFINITY_ALL -1ULL
#define PCI_CONFIG_MMIO_LENGTH 0x2000
#define CFG_PAGE_OFFSET 0x1000
#define CFG_PAGE_SIZE (PCI_CONFIG_MMIO_LENGTH - CFG_PAGE_OFFSET)
@@ -350,6 +352,7 @@ enum hv_pcibus_state {
hv_pcibus_init = 0,
hv_pcibus_probed,
hv_pcibus_installed,
+ hv_pcibus_removed,
hv_pcibus_maximum
};
@@ -421,7 +424,7 @@ enum hv_pcidev_ref_reason {
struct hv_pci_dev {
/* List protected by pci_rescan_remove_lock */
struct list_head list_entry;
- atomic_t refs;
+ refcount_t refs;
enum hv_pcichild_state state;
struct pci_function_description desc;
bool reported_missing;
@@ -876,7 +879,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
hv_int_desc_free(hpdev, int_desc);
}
- int_desc = kzalloc(sizeof(*int_desc), GFP_KERNEL);
+ int_desc = kzalloc(sizeof(*int_desc), GFP_ATOMIC);
if (!int_desc)
goto drop_reference;
@@ -897,9 +900,13 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
* processors because Hyper-V only supports 64 in a guest.
*/
affinity = irq_data_get_affinity_mask(data);
- for_each_cpu_and(cpu, affinity, cpu_online_mask) {
- int_pkt->int_desc.cpu_mask |=
- (1ULL << vmbus_cpu_number_to_vp_number(cpu));
+ if (cpumask_weight(affinity) >= 32) {
+ int_pkt->int_desc.cpu_mask = CPU_AFFINITY_ALL;
+ } else {
+ for_each_cpu_and(cpu, affinity, cpu_online_mask) {
+ int_pkt->int_desc.cpu_mask |=
+ (1ULL << vmbus_cpu_number_to_vp_number(cpu));
+ }
}
ret = vmbus_sendpacket(hpdev->hbus->hdev->channel, int_pkt,
@@ -1208,9 +1215,11 @@ static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus)
hbus->pci_bus->msi = &hbus->msi_chip;
hbus->pci_bus->msi->dev = &hbus->hdev->device;
+ pci_lock_rescan_remove();
pci_scan_child_bus(hbus->pci_bus);
pci_bus_assign_resources(hbus->pci_bus);
pci_bus_add_devices(hbus->pci_bus);
+ pci_unlock_rescan_remove();
hbus->state = hv_pcibus_installed;
return 0;
}
@@ -1254,13 +1263,13 @@ static void q_resource_requirements(void *context, struct pci_response *resp,
static void get_pcichild(struct hv_pci_dev *hpdev,
enum hv_pcidev_ref_reason reason)
{
- atomic_inc(&hpdev->refs);
+ refcount_inc(&hpdev->refs);
}
static void put_pcichild(struct hv_pci_dev *hpdev,
enum hv_pcidev_ref_reason reason)
{
- if (atomic_dec_and_test(&hpdev->refs))
+ if (refcount_dec_and_test(&hpdev->refs))
kfree(hpdev);
}
@@ -1314,7 +1323,7 @@ static struct hv_pci_dev *new_pcichild_device(struct hv_pcibus_device *hbus,
wait_for_completion(&comp_pkt.host_event);
hpdev->desc = *desc;
- get_pcichild(hpdev, hv_pcidev_ref_initial);
+ refcount_set(&hpdev->refs, 1);
get_pcichild(hpdev, hv_pcidev_ref_childlist);
spin_lock_irqsave(&hbus->device_list_lock, flags);
@@ -1504,13 +1513,24 @@ static void pci_devices_present_work(struct work_struct *work)
put_pcichild(hpdev, hv_pcidev_ref_initial);
}
- /* Tell the core to rescan bus because there may have been changes. */
- if (hbus->state == hv_pcibus_installed) {
+ switch(hbus->state) {
+ case hv_pcibus_installed:
+ /*
+ * Tell the core to rescan bus
+ * because there may have been changes.
+ */
pci_lock_rescan_remove();
pci_scan_child_bus(hbus->pci_bus);
pci_unlock_rescan_remove();
- } else {
+ break;
+
+ case hv_pcibus_init:
+ case hv_pcibus_probed:
survey_child_resources(hbus);
+ break;
+
+ default:
+ break;
}
up(&hbus->enum_sem);
@@ -1600,8 +1620,10 @@ static void hv_eject_device_work(struct work_struct *work)
pdev = pci_get_domain_bus_and_slot(hpdev->hbus->sysdata.domain, 0,
wslot);
if (pdev) {
+ pci_lock_rescan_remove();
pci_stop_and_remove_bus_device(pdev);
pci_dev_put(pdev);
+ pci_unlock_rescan_remove();
}
spin_lock_irqsave(&hpdev->hbus->device_list_lock, flags);
@@ -2185,6 +2207,7 @@ static int hv_pci_probe(struct hv_device *hdev,
hbus = kzalloc(sizeof(*hbus), GFP_KERNEL);
if (!hbus)
return -ENOMEM;
+ hbus->state = hv_pcibus_init;
/*
* The PCI bus "domain" is what is called "segment" in ACPI and
@@ -2348,6 +2371,7 @@ static int hv_pci_remove(struct hv_device *hdev)
pci_stop_root_bus(hbus->pci_bus);
pci_remove_root_bus(hbus->pci_bus);
pci_unlock_rescan_remove();
+ hbus->state = hv_pcibus_removed;
}
hv_pci_bus_exit(hdev);
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index cd7d519..f353a6e 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -752,10 +752,11 @@ static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
* If the mask is 0xffff0000, then we only want to write
* the link control register, rather than clearing the
* RW1C bits in the link status register. Mask out the
- * status register bits.
+ * RW1C status register bits.
*/
if (mask == 0xffff0000)
- value &= 0xffff;
+ value &= ~((PCI_EXP_LNKSTA_LABS |
+ PCI_EXP_LNKSTA_LBMS) << 16);
mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
break;
@@ -1005,22 +1006,6 @@ static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
return -ENOENT;
}
-static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
-{
- struct device_node *msi_node;
-
- msi_node = of_parse_phandle(pcie->pdev->dev.of_node,
- "msi-parent", 0);
- if (!msi_node)
- return;
-
- pcie->msi = of_pci_find_msi_chip_by_node(msi_node);
- of_node_put(msi_node);
-
- if (pcie->msi)
- pcie->msi->dev = &pcie->pdev->dev;
-}
-
#ifdef CONFIG_PM_SLEEP
static int mvebu_pcie_suspend(struct device *dev)
{
@@ -1298,7 +1283,6 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
for (i = 0; i < (IO_SPACE_LIMIT - SZ_64K); i += SZ_64K)
pci_ioremap_io(i, pcie->io.start + i);
- mvebu_pcie_msi_enable(pcie);
mvebu_pcie_enable(pcie);
platform_set_drvdata(pdev, pcie);
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index ed8a93f..2618f87 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -380,7 +380,7 @@ static struct tegra_pcie_bus *tegra_pcie_bus_alloc(struct tegra_pcie *pcie,
unsigned int busnr)
{
struct device *dev = pcie->dev;
- pgprot_t prot = pgprot_device(PAGE_KERNEL);
+ pgprot_t prot = pgprot_noncached(PAGE_KERNEL);
phys_addr_t cs = pcie->cs->start;
struct tegra_pcie_bus *bus;
unsigned int i;
@@ -1962,7 +1962,7 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
rp->pcie = pcie;
rp->np = port;
- rp->base = devm_ioremap_resource(dev, &rp->regs);
+ rp->base = devm_pci_remap_cfg_resource(dev, &rp->regs);
if (IS_ERR(rp->base))
return PTR_ERR(rp->base);
diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c
index 3f54a43..fc0ca03 100644
--- a/drivers/pci/host/pci-thunder-ecam.c
+++ b/drivers/pci/host/pci-thunder-ecam.c
@@ -373,6 +373,7 @@ static struct platform_driver thunder_ecam_driver = {
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = thunder_ecam_of_match,
+ .suppress_bind_attrs = true,
},
.probe = thunder_ecam_probe,
};
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index 6e031b5..6e066f8 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -474,6 +474,7 @@ static struct platform_driver thunder_pem_driver = {
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = thunder_pem_of_match,
+ .suppress_bind_attrs = true,
},
.probe = thunder_pem_probe,
};
diff --git a/drivers/pci/host/pci-versatile.c b/drivers/pci/host/pci-versatile.c
index 5ebee7d..9281eee 100644
--- a/drivers/pci/host/pci-versatile.c
+++ b/drivers/pci/host/pci-versatile.c
@@ -138,7 +138,8 @@ static int versatile_pci_probe(struct platform_device *pdev)
return PTR_ERR(versatile_cfg_base[0]);
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
- versatile_cfg_base[1] = devm_ioremap_resource(&pdev->dev, res);
+ versatile_cfg_base[1] = devm_pci_remap_cfg_resource(&pdev->dev,
+ res);
if (IS_ERR(versatile_cfg_base[1]))
return PTR_ERR(versatile_cfg_base[1]);
@@ -221,6 +222,7 @@ static struct platform_driver versatile_pci_driver = {
.driver = {
.name = "versatile-pci",
.of_match_table = versatile_pci_of_match,
+ .suppress_bind_attrs = true,
},
.probe = versatile_pci_probe,
};
diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
index 1a61087..8cae013 100644
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -248,7 +248,7 @@ static int xgene_pcie_ecam_init(struct pci_config_window *cfg, u32 ipversion)
dev_err(dev, "can't get CSR resource\n");
return ret;
}
- port->csr_base = devm_ioremap_resource(dev, &csr);
+ port->csr_base = devm_pci_remap_cfg_resource(dev, &csr);
if (IS_ERR(port->csr_base))
return PTR_ERR(port->csr_base);
@@ -359,7 +359,7 @@ static int xgene_pcie_map_reg(struct xgene_pcie_port *port,
struct resource *res;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
- port->csr_base = devm_ioremap_resource(dev, res);
+ port->csr_base = devm_pci_remap_cfg_resource(dev, res);
if (IS_ERR(port->csr_base))
return PTR_ERR(port->csr_base);
@@ -697,6 +697,7 @@ static struct platform_driver xgene_pcie_driver = {
.driver = {
.name = "xgene-pcie",
.of_match_table = of_match_ptr(xgene_pcie_match_table),
+ .suppress_bind_attrs = true,
},
.probe = xgene_pcie_probe_bridge,
};
diff --git a/drivers/pci/host/pcie-iproc-platform.c b/drivers/pci/host/pcie-iproc-platform.c
index 8c6a327..90d2bdd 100644
--- a/drivers/pci/host/pcie-iproc-platform.c
+++ b/drivers/pci/host/pcie-iproc-platform.c
@@ -67,7 +67,8 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
return ret;
}
- pcie->base = devm_ioremap(dev, reg.start, resource_size(®));
+ pcie->base = devm_pci_remap_cfgspace(dev, reg.start,
+ resource_size(®));
if (!pcie->base) {
dev_err(dev, "unable to map controller registers\n");
return -ENOMEM;
diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c
index 26ddd35..0e020b6 100644
--- a/drivers/pci/host/pcie-rockchip.c
+++ b/drivers/pci/host/pcie-rockchip.c
@@ -26,6 +26,7 @@
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
+#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_pci.h>
@@ -223,9 +224,11 @@ struct rockchip_pcie {
int link_gen;
struct device *dev;
struct irq_domain *irq_domain;
- u32 io_size;
int offset;
+ struct pci_bus *root_bus;
+ struct resource *io;
phys_addr_t io_bus_addr;
+ u32 io_size;
void __iomem *msg_region;
u32 mem_size;
phys_addr_t msg_bus_addr;
@@ -425,7 +428,8 @@ static struct pci_ops rockchip_pcie_ops = {
static void rockchip_pcie_set_power_limit(struct rockchip_pcie *rockchip)
{
- u32 status, curr, scale, power;
+ int curr;
+ u32 status, scale, power;
if (IS_ERR(rockchip->vpcie3v3))
return;
@@ -437,24 +441,25 @@ static void rockchip_pcie_set_power_limit(struct rockchip_pcie *rockchip)
* to the actual power supply.
*/
curr = regulator_get_current_limit(rockchip->vpcie3v3);
- if (curr > 0) {
- scale = 3; /* 0.001x */
- curr = curr / 1000; /* convert to mA */
- power = (curr * 3300) / 1000; /* milliwatt */
- while (power > PCIE_RC_CONFIG_DCR_CSPL_LIMIT) {
- if (!scale) {
- dev_warn(rockchip->dev, "invalid power supply\n");
- return;
- }
- scale--;
- power = power / 10;
- }
+ if (curr <= 0)
+ return;
- status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_DCR);
- status |= (power << PCIE_RC_CONFIG_DCR_CSPL_SHIFT) |
- (scale << PCIE_RC_CONFIG_DCR_CPLS_SHIFT);
- rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_DCR);
+ scale = 3; /* 0.001x */
+ curr = curr / 1000; /* convert to mA */
+ power = (curr * 3300) / 1000; /* milliwatt */
+ while (power > PCIE_RC_CONFIG_DCR_CSPL_LIMIT) {
+ if (!scale) {
+ dev_warn(rockchip->dev, "invalid power supply\n");
+ return;
+ }
+ scale--;
+ power = power / 10;
}
+
+ status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_DCR);
+ status |= (power << PCIE_RC_CONFIG_DCR_CSPL_SHIFT) |
+ (scale << PCIE_RC_CONFIG_DCR_CPLS_SHIFT);
+ rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_DCR);
}
/**
@@ -596,7 +601,12 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
/* Set RC's clock architecture as common clock */
status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_LCS);
- status |= PCI_EXP_LNKCTL_CCC;
+ status |= PCI_EXP_LNKSTA_SLC << 16;
+ rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_LCS);
+
+ /* Set RC's RCB to 128 */
+ status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_LCS);
+ status |= PCI_EXP_LNKCTL_RCB;
rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_LCS);
/* Enable Gen1 training */
@@ -822,7 +832,7 @@ static int rockchip_pcie_parse_dt(struct rockchip_pcie *rockchip)
regs = platform_get_resource_byname(pdev,
IORESOURCE_MEM,
"axi-base");
- rockchip->reg_base = devm_ioremap_resource(dev, regs);
+ rockchip->reg_base = devm_pci_remap_cfg_resource(dev, regs);
if (IS_ERR(rockchip->reg_base))
return PTR_ERR(rockchip->reg_base);
@@ -1359,6 +1369,7 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
err, io);
continue;
}
+ rockchip->io = io;
break;
case IORESOURCE_MEM:
mem = win->res;
@@ -1390,6 +1401,7 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
err = -ENOMEM;
goto err_free_res;
}
+ rockchip->root_bus = bus;
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
@@ -1397,7 +1409,7 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
pcie_bus_configure_settings(child);
pci_bus_add_devices(bus);
- return err;
+ return 0;
err_free_res:
pci_free_resource_list(&res);
@@ -1420,6 +1432,34 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
return err;
}
+static int rockchip_pcie_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_pcie *rockchip = dev_get_drvdata(dev);
+
+ pci_stop_root_bus(rockchip->root_bus);
+ pci_remove_root_bus(rockchip->root_bus);
+ pci_unmap_iospace(rockchip->io);
+ irq_domain_remove(rockchip->irq_domain);
+
+ phy_power_off(rockchip->phy);
+ phy_exit(rockchip->phy);
+
+ clk_disable_unprepare(rockchip->clk_pcie_pm);
+ clk_disable_unprepare(rockchip->hclk_pcie);
+ clk_disable_unprepare(rockchip->aclk_perf_pcie);
+ clk_disable_unprepare(rockchip->aclk_pcie);
+
+ if (!IS_ERR(rockchip->vpcie3v3))
+ regulator_disable(rockchip->vpcie3v3);
+ if (!IS_ERR(rockchip->vpcie1v8))
+ regulator_disable(rockchip->vpcie1v8);
+ if (!IS_ERR(rockchip->vpcie0v9))
+ regulator_disable(rockchip->vpcie0v9);
+
+ return 0;
+}
+
static const struct dev_pm_ops rockchip_pcie_pm_ops = {
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(rockchip_pcie_suspend_noirq,
rockchip_pcie_resume_noirq)
@@ -1429,6 +1469,7 @@ static const struct of_device_id rockchip_pcie_of_match[] = {
{ .compatible = "rockchip,rk3399-pcie", },
{}
};
+MODULE_DEVICE_TABLE(of, rockchip_pcie_of_match);
static struct platform_driver rockchip_pcie_driver = {
.driver = {
@@ -1437,6 +1478,10 @@ static struct platform_driver rockchip_pcie_driver = {
.pm = &rockchip_pcie_pm_ops,
},
.probe = rockchip_pcie_probe,
-
+ .remove = rockchip_pcie_remove,
};
-builtin_platform_driver(rockchip_pcie_driver);
+module_platform_driver(rockchip_pcie_driver);
+
+MODULE_AUTHOR("Rockchip Inc");
+MODULE_DESCRIPTION("Rockchip AXI PCIe driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/host/pcie-xilinx-nwl.c b/drivers/pci/host/pcie-xilinx-nwl.c
index 4c3e0ab..4b16b26 100644
--- a/drivers/pci/host/pcie-xilinx-nwl.c
+++ b/drivers/pci/host/pcie-xilinx-nwl.c
@@ -761,7 +761,7 @@ static int nwl_pcie_parse_dt(struct nwl_pcie *pcie,
pcie->phys_pcie_reg_base = res->start;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
- pcie->ecam_base = devm_ioremap_resource(dev, res);
+ pcie->ecam_base = devm_pci_remap_cfg_resource(dev, res);
if (IS_ERR(pcie->ecam_base))
return PTR_ERR(pcie->ecam_base);
pcie->phys_ecam_base = res->start;
diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 7f030f5..2fe2df5 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -606,7 +606,7 @@ static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
return err;
}
- port->reg_base = devm_ioremap_resource(dev, ®s);
+ port->reg_base = devm_pci_remap_cfg_resource(dev, ®s);
if (IS_ERR(port->reg_base))
return PTR_ERR(port->reg_base);
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 9e69403..19f30a9 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -109,6 +109,12 @@ int pciehp_unconfigure_device(struct slot *p_slot)
break;
}
}
+ if (!presence) {
+ pci_dev_set_disconnected(dev, NULL);
+ if (pci_has_subordinate(dev))
+ pci_walk_bus(dev->subordinate,
+ pci_dev_set_disconnected, NULL);
+ }
pci_stop_and_remove_bus_device(dev);
/*
* Ensure that no new Requests will be generated from
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 2479ae8..d9dc736 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -450,6 +450,7 @@ static int sriov_init(struct pci_dev *dev, int pos)
iov->total_VFs = total;
iov->pgsz = pgsz;
iov->self = dev;
+ iov->drivers_autoprobe = true;
pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap);
pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link);
if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END)
diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c
index f9f2a03..83d3095 100644
--- a/drivers/pci/irq.c
+++ b/drivers/pci/irq.c
@@ -1,7 +1,8 @@
/*
- * PCI IRQ failure handing code
+ * PCI IRQ handling code
*
* Copyright (c) 2008 James Bottomley <James.Bottomley@HansenPartnership.com>
+ * Copyright (C) 2017 Christoph Hellwig.
*/
#include <linux/acpi.h>
@@ -59,3 +60,61 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *pdev)
return PCI_LOST_IRQ_NO_INFORMATION;
}
EXPORT_SYMBOL(pci_lost_interrupt);
+
+/**
+ * pci_request_irq - allocate an interrupt line for a PCI device
+ * @dev: PCI device to operate on
+ * @nr: device-relative interrupt vector index (0-based).
+ * @handler: Function to be called when the IRQ occurs.
+ * Primary handler for threaded interrupts.
+ * If NULL and thread_fn != NULL the default primary handler is
+ * installed.
+ * @thread_fn: Function called from the IRQ handler thread
+ * If NULL, no IRQ thread is created
+ * @dev_id: Cookie passed back to the handler function
+ * @fmt: Printf-like format string naming the handler
+ *
+ * This call allocates interrupt resources and enables the interrupt line and
+ * IRQ handling. From the point this call is made @handler and @thread_fn may
+ * be invoked. All interrupts requested using this function might be shared.
+ *
+ * @dev_id must not be NULL and must be globally unique.
+ */
+int pci_request_irq(struct pci_dev *dev, unsigned int nr, irq_handler_t handler,
+ irq_handler_t thread_fn, void *dev_id, const char *fmt, ...)
+{
+ va_list ap;
+ int ret;
+ char *devname;
+
+ va_start(ap, fmt);
+ devname = kvasprintf(GFP_KERNEL, fmt, ap);
+ va_end(ap);
+
+ ret = request_threaded_irq(pci_irq_vector(dev, nr), handler, thread_fn,
+ IRQF_SHARED, devname, dev_id);
+ if (ret)
+ kfree(devname);
+ return ret;
+}
+EXPORT_SYMBOL(pci_request_irq);
+
+/**
+ * pci_free_irq - free an interrupt allocated with pci_request_irq
+ * @dev: PCI device to operate on
+ * @nr: device-relative interrupt vector index (0-based).
+ * @dev_id: Device identity to free
+ *
+ * Remove an interrupt handler. The handler is removed and if the interrupt
+ * line is no longer in use by any driver it is disabled. The caller must
+ * ensure the interrupt is disabled on the device before calling this function.
+ * The function does not return until any executing interrupts for this IRQ
+ * have completed.
+ *
+ * This function must not be called from interrupt context.
+ */
+void pci_free_irq(struct pci_dev *dev, unsigned int nr, void *dev_id)
+{
+ kfree(free_irq(pci_irq_vector(dev, nr), dev_id));
+}
+EXPORT_SYMBOL(pci_free_irq);
diff --git a/drivers/pci/mmap.c b/drivers/pci/mmap.c
new file mode 100644
index 0000000..9a5e5a9
--- /dev/null
+++ b/drivers/pci/mmap.c
@@ -0,0 +1,99 @@
+/*
+ * mmap.c — generic PCI resource mmap helper
+ *
+ * Copyright © 2017 Amazon.com, Inc. or its affiliates.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+
+#ifdef ARCH_GENERIC_PCI_MMAP_RESOURCE
+
+/*
+ * Modern setup: generic pci_mmap_resource_range(), and implement the legacy
+ * pci_mmap_page_range() (if needed) as a wrapper round it.
+ */
+
+#ifdef HAVE_PCI_MMAP
+int pci_mmap_page_range(struct pci_dev *pdev, int bar,
+ struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ resource_size_t start, end;
+
+ pci_resource_to_user(pdev, bar, &pdev->resource[bar], &start, &end);
+
+ /* Adjust vm_pgoff to be the offset within the resource */
+ vma->vm_pgoff -= start >> PAGE_SHIFT;
+ return pci_mmap_resource_range(pdev, bar, vma, mmap_state,
+ write_combine);
+}
+#endif
+
+static const struct vm_operations_struct pci_phys_vm_ops = {
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+ .access = generic_access_phys,
+#endif
+};
+
+int pci_mmap_resource_range(struct pci_dev *pdev, int bar,
+ struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ unsigned long size;
+ int ret;
+
+ size = ((pci_resource_len(pdev, bar) - 1) >> PAGE_SHIFT) + 1;
+ if (vma->vm_pgoff + vma_pages(vma) > size)
+ return -EINVAL;
+
+ if (write_combine)
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+ else
+ vma->vm_page_prot = pgprot_device(vma->vm_page_prot);
+
+ if (mmap_state == pci_mmap_io) {
+ ret = pci_iobar_pfn(pdev, bar, vma);
+ if (ret)
+ return ret;
+ } else
+ vma->vm_pgoff += (pci_resource_start(pdev, bar) >> PAGE_SHIFT);
+
+ vma->vm_ops = &pci_phys_vm_ops;
+
+ return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+}
+
+#elif defined(HAVE_PCI_MMAP) /* && !ARCH_GENERIC_PCI_MMAP_RESOURCE */
+
+/*
+ * Legacy setup: Impement pci_mmap_resource_range() as a wrapper around
+ * the architecture's pci_mmap_page_range(), converting to "user visible"
+ * addresses as necessary.
+ */
+
+int pci_mmap_resource_range(struct pci_dev *pdev, int bar,
+ struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ resource_size_t start, end;
+
+ /*
+ * pci_mmap_page_range() expects the same kind of entry as coming
+ * from /proc/bus/pci/ which is a "user visible" value. If this is
+ * different from the resource itself, arch will do necessary fixup.
+ */
+ pci_resource_to_user(pdev, bar, &pdev->resource[bar], &start, &end);
+ vma->vm_pgoff += start >> PAGE_SHIFT;
+ return pci_mmap_page_range(pdev, bar, vma, mmap_state, write_combine);
+}
+#endif
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 0042c36..ba44fdf 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -298,7 +298,7 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
{
struct pci_dev *dev = msi_desc_to_pci_dev(entry);
- if (dev->current_state != PCI_D0) {
+ if (dev->current_state != PCI_D0 || pci_dev_is_disconnected(dev)) {
/* Don't touch the hardware now */
} else if (entry->msi_attrib.is_msix) {
void __iomem *base = pci_msix_desc_addr(entry);
@@ -541,7 +541,8 @@ msi_setup_entry(struct pci_dev *dev, int nvec, const struct irq_affinity *affd)
if (affd) {
masks = irq_create_affinity_masks(nvec, affd);
if (!masks)
- pr_err("Unable to allocate affinity masks, ignoring\n");
+ dev_err(&dev->dev, "can't allocate MSI affinity masks for %d vectors\n",
+ nvec);
}
/* MSI Entry Initialization */
@@ -681,7 +682,8 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
if (affd) {
masks = irq_create_affinity_masks(nvec, affd);
if (!masks)
- pr_err("Unable to allocate affinity masks, ignoring\n");
+ dev_err(&dev->dev, "can't allocate MSI-X affinity masks for %d vectors\n",
+ nvec);
}
for (i = 0, curmsk = masks; i < nvec; i++) {
@@ -882,7 +884,7 @@ int pci_msi_vec_count(struct pci_dev *dev)
}
EXPORT_SYMBOL(pci_msi_vec_count);
-void pci_msi_shutdown(struct pci_dev *dev)
+static void pci_msi_shutdown(struct pci_dev *dev)
{
struct msi_desc *desc;
u32 mask;
@@ -973,13 +975,18 @@ static int __pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
return msix_capability_init(dev, entries, nvec, affd);
}
-void pci_msix_shutdown(struct pci_dev *dev)
+static void pci_msix_shutdown(struct pci_dev *dev)
{
struct msi_desc *entry;
if (!pci_msi_enable || !dev || !dev->msix_enabled)
return;
+ if (pci_dev_is_disconnected(dev)) {
+ dev->msix_enabled = 0;
+ return;
+ }
+
/* Return the device with MSI-X masked as initial states */
for_each_pci_msi_entry(entry, dev) {
/* Keep cached states to be restored */
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index afa7271..192e7b6 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -394,6 +394,18 @@ void __weak pcibios_free_irq(struct pci_dev *dev)
{
}
+#ifdef CONFIG_PCI_IOV
+static inline bool pci_device_can_probe(struct pci_dev *pdev)
+{
+ return (!pdev->is_virtfn || pdev->physfn->sriov->drivers_autoprobe);
+}
+#else
+static inline bool pci_device_can_probe(struct pci_dev *pdev)
+{
+ return true;
+}
+#endif
+
static int pci_device_probe(struct device *dev)
{
int error;
@@ -405,10 +417,12 @@ static int pci_device_probe(struct device *dev)
return error;
pci_dev_get(pci_dev);
- error = __pci_device_probe(drv, pci_dev);
- if (error) {
- pcibios_free_irq(pci_dev);
- pci_dev_put(pci_dev);
+ if (pci_device_can_probe(pci_dev)) {
+ error = __pci_device_probe(drv, pci_dev);
+ if (error) {
+ pcibios_free_irq(pci_dev);
+ pci_dev_put(pci_dev);
+ }
}
return error;
@@ -461,8 +475,6 @@ static void pci_device_shutdown(struct device *dev)
if (drv && drv->shutdown)
drv->shutdown(pci_dev);
- pci_msi_shutdown(pci_dev);
- pci_msix_shutdown(pci_dev);
/*
* If this is a kexec reboot, turn off Bus Master bit on the
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 25d010d..31e9961 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -526,10 +526,37 @@ static ssize_t sriov_numvfs_store(struct device *dev,
return count;
}
+static ssize_t sriov_drivers_autoprobe_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ return sprintf(buf, "%u\n", pdev->sriov->drivers_autoprobe);
+}
+
+static ssize_t sriov_drivers_autoprobe_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ bool drivers_autoprobe;
+
+ if (kstrtobool(buf, &drivers_autoprobe) < 0)
+ return -EINVAL;
+
+ pdev->sriov->drivers_autoprobe = drivers_autoprobe;
+
+ return count;
+}
+
static struct device_attribute sriov_totalvfs_attr = __ATTR_RO(sriov_totalvfs);
static struct device_attribute sriov_numvfs_attr =
__ATTR(sriov_numvfs, (S_IRUGO|S_IWUSR|S_IWGRP),
sriov_numvfs_show, sriov_numvfs_store);
+static struct device_attribute sriov_drivers_autoprobe_attr =
+ __ATTR(sriov_drivers_autoprobe, (S_IRUGO|S_IWUSR|S_IWGRP),
+ sriov_drivers_autoprobe_show, sriov_drivers_autoprobe_store);
#endif /* CONFIG_PCI_IOV */
static ssize_t driver_override_store(struct device *dev,
@@ -980,20 +1007,24 @@ void pci_remove_legacy_files(struct pci_bus *b)
}
#endif /* HAVE_PCI_LEGACY */
-#ifdef HAVE_PCI_MMAP
+#if defined(HAVE_PCI_MMAP) || defined(ARCH_GENERIC_PCI_MMAP_RESOURCE)
int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
enum pci_mmap_api mmap_api)
{
- unsigned long nr, start, size, pci_start;
+ unsigned long nr, start, size;
+ resource_size_t pci_start = 0, pci_end;
if (pci_resource_len(pdev, resno) == 0)
return 0;
nr = vma_pages(vma);
start = vma->vm_pgoff;
size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
- pci_start = (mmap_api == PCI_MMAP_PROCFS) ?
- pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+ if (mmap_api == PCI_MMAP_PROCFS) {
+ pci_resource_to_user(pdev, resno, &pdev->resource[resno],
+ &pci_start, &pci_end);
+ pci_start >>= PAGE_SHIFT;
+ }
if (start >= pci_start && start < pci_start + size &&
start + nr <= pci_start + size)
return 1;
@@ -1013,37 +1044,24 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
struct vm_area_struct *vma, int write_combine)
{
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
- struct resource *res = attr->private;
+ int bar = (unsigned long)attr->private;
enum pci_mmap_state mmap_type;
- resource_size_t start, end;
- int i;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++)
- if (res == &pdev->resource[i])
- break;
- if (i >= PCI_ROM_RESOURCE)
- return -ENODEV;
+ struct resource *res = &pdev->resource[bar];
if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start))
return -EINVAL;
- if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
+ if (!pci_mmap_fits(pdev, bar, vma, PCI_MMAP_SYSFS)) {
WARN(1, "process \"%s\" tried to map 0x%08lx bytes at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
- pci_name(pdev), i,
- (u64)pci_resource_start(pdev, i),
- (u64)pci_resource_len(pdev, i));
+ pci_name(pdev), bar,
+ (u64)pci_resource_start(pdev, bar),
+ (u64)pci_resource_len(pdev, bar));
return -EINVAL;
}
-
- /* pci_mmap_page_range() expects the same kind of entry as coming
- * from /proc/bus/pci/ which is a "user visible" value. If this is
- * different from the resource itself, arch will do necessary fixup.
- */
- pci_resource_to_user(pdev, i, res, &start, &end);
- vma->vm_pgoff += start >> PAGE_SHIFT;
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
- return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
+
+ return pci_mmap_resource_range(pdev, bar, vma, mmap_type, write_combine);
}
static int pci_mmap_resource_uc(struct file *filp, struct kobject *kobj,
@@ -1065,22 +1083,18 @@ static ssize_t pci_resource_io(struct file *filp, struct kobject *kobj,
loff_t off, size_t count, bool write)
{
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
- struct resource *res = attr->private;
+ int bar = (unsigned long)attr->private;
+ struct resource *res;
unsigned long port = off;
- int i;
- for (i = 0; i < PCI_ROM_RESOURCE; i++)
- if (res == &pdev->resource[i])
- break;
- if (i >= PCI_ROM_RESOURCE)
- return -ENODEV;
+ res = &pdev->resource[bar];
- port += pci_resource_start(pdev, i);
+ port += pci_resource_start(pdev, bar);
- if (port > pci_resource_end(pdev, i))
+ if (port > pci_resource_end(pdev, bar))
return 0;
- if (port + count - 1 > pci_resource_end(pdev, i))
+ if (port + count - 1 > pci_resource_end(pdev, bar))
return -EINVAL;
switch (count) {
@@ -1170,16 +1184,19 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
} else {
pdev->res_attr[num] = res_attr;
sprintf(res_attr_name, "resource%d", num);
- res_attr->mmap = pci_mmap_resource_uc;
- }
- if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
- res_attr->read = pci_read_resource_io;
- res_attr->write = pci_write_resource_io;
+ if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
+ res_attr->read = pci_read_resource_io;
+ res_attr->write = pci_write_resource_io;
+ if (arch_can_pci_mmap_io())
+ res_attr->mmap = pci_mmap_resource_uc;
+ } else {
+ res_attr->mmap = pci_mmap_resource_uc;
+ }
}
res_attr->attr.name = res_attr_name;
res_attr->attr.mode = S_IRUSR | S_IWUSR;
res_attr->size = pci_resource_len(pdev, num);
- res_attr->private = &pdev->resource[num];
+ res_attr->private = (void *)(unsigned long)num;
retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
if (retval)
kfree(res_attr);
@@ -1207,9 +1224,9 @@ static int pci_create_resource_files(struct pci_dev *pdev)
retval = pci_create_attr(pdev, i, 0);
/* for prefetchable resources, create a WC mappable file */
- if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH)
+ if (!retval && arch_can_pci_mmap_wc() &&
+ pdev->resource[i].flags & IORESOURCE_PREFETCH)
retval = pci_create_attr(pdev, i, 1);
-
if (retval) {
pci_remove_resource_files(pdev);
return retval;
@@ -1549,6 +1566,7 @@ static struct attribute_group pci_dev_hp_attr_group = {
static struct attribute *sriov_dev_attrs[] = {
&sriov_totalvfs_attr.attr,
&sriov_numvfs_attr.attr,
+ &sriov_drivers_autoprobe_attr.attr,
NULL,
};
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7904d02..b01bd5b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -66,7 +66,8 @@ static void pci_dev_d3_sleep(struct pci_dev *dev)
if (delay < pci_pm_d3_delay)
delay = pci_pm_d3_delay;
- msleep(delay);
+ if (delay)
+ msleep(delay);
}
#ifdef CONFIG_PCI_DOMAINS
@@ -827,7 +828,8 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
* because have already delayed for the bridge.
*/
if (dev->runtime_d3cold) {
- msleep(dev->d3cold_delay);
+ if (dev->d3cold_delay)
+ msleep(dev->d3cold_delay);
/*
* When powering on a bridge from D3cold, the
* whole hierarchy may be powered on into
@@ -1782,8 +1784,8 @@ static void pci_pme_list_scan(struct work_struct *work)
}
}
if (!list_empty(&pci_pme_list))
- schedule_delayed_work(&pci_pme_work,
- msecs_to_jiffies(PME_TIMEOUT));
+ queue_delayed_work(system_freezable_wq, &pci_pme_work,
+ msecs_to_jiffies(PME_TIMEOUT));
mutex_unlock(&pci_pme_list_mutex);
}
@@ -1848,8 +1850,9 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
mutex_lock(&pci_pme_list_mutex);
list_add(&pme_dev->list, &pci_pme_list);
if (list_is_singular(&pci_pme_list))
- schedule_delayed_work(&pci_pme_work,
- msecs_to_jiffies(PME_TIMEOUT));
+ queue_delayed_work(system_freezable_wq,
+ &pci_pme_work,
+ msecs_to_jiffies(PME_TIMEOUT));
mutex_unlock(&pci_pme_list_mutex);
} else {
mutex_lock(&pci_pme_list_mutex);
@@ -3363,7 +3366,7 @@ unsigned long __weak pci_address_to_pio(phys_addr_t address)
* Only architectures that have memory mapped IO functions defined
* (and the PCI_IOBASE value defined) should call this function.
*/
-int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
{
#if defined(PCI_IOBASE) && defined(CONFIG_MMU)
unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start;
@@ -3383,6 +3386,7 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
return -ENODEV;
#endif
}
+EXPORT_SYMBOL(pci_remap_iospace);
/**
* pci_unmap_iospace - Unmap the memory mapped I/O space
@@ -3400,6 +3404,89 @@ void pci_unmap_iospace(struct resource *res)
unmap_kernel_range(vaddr, resource_size(res));
#endif
}
+EXPORT_SYMBOL(pci_unmap_iospace);
+
+/**
+ * devm_pci_remap_cfgspace - Managed pci_remap_cfgspace()
+ * @dev: Generic device to remap IO address for
+ * @offset: Resource address to map
+ * @size: Size of map
+ *
+ * Managed pci_remap_cfgspace(). Map is automatically unmapped on driver
+ * detach.
+ */
+void __iomem *devm_pci_remap_cfgspace(struct device *dev,
+ resource_size_t offset,
+ resource_size_t size)
+{
+ void __iomem **ptr, *addr;
+
+ ptr = devres_alloc(devm_ioremap_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return NULL;
+
+ addr = pci_remap_cfgspace(offset, size);
+ if (addr) {
+ *ptr = addr;
+ devres_add(dev, ptr);
+ } else
+ devres_free(ptr);
+
+ return addr;
+}
+EXPORT_SYMBOL(devm_pci_remap_cfgspace);
+
+/**
+ * devm_pci_remap_cfg_resource - check, request region and ioremap cfg resource
+ * @dev: generic device to handle the resource for
+ * @res: configuration space resource to be handled
+ *
+ * Checks that a resource is a valid memory region, requests the memory
+ * region and ioremaps with pci_remap_cfgspace() API that ensures the
+ * proper PCI configuration space memory attributes are guaranteed.
+ *
+ * All operations are managed and will be undone on driver detach.
+ *
+ * Returns a pointer to the remapped memory or an ERR_PTR() encoded error code
+ * on failure. Usage example:
+ *
+ * res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ * base = devm_pci_remap_cfg_resource(&pdev->dev, res);
+ * if (IS_ERR(base))
+ * return PTR_ERR(base);
+ */
+void __iomem *devm_pci_remap_cfg_resource(struct device *dev,
+ struct resource *res)
+{
+ resource_size_t size;
+ const char *name;
+ void __iomem *dest_ptr;
+
+ BUG_ON(!dev);
+
+ if (!res || resource_type(res) != IORESOURCE_MEM) {
+ dev_err(dev, "invalid resource\n");
+ return IOMEM_ERR_PTR(-EINVAL);
+ }
+
+ size = resource_size(res);
+ name = res->name ?: dev_name(dev);
+
+ if (!devm_request_mem_region(dev, res->start, size, name)) {
+ dev_err(dev, "can't request region for resource %pR\n", res);
+ return IOMEM_ERR_PTR(-EBUSY);
+ }
+
+ dest_ptr = devm_pci_remap_cfgspace(dev, res->start, size);
+ if (!dest_ptr) {
+ dev_err(dev, "ioremap failed for resource %pR\n", res);
+ devm_release_mem_region(dev, res->start, size);
+ dest_ptr = IOMEM_ERR_PTR(-ENOMEM);
+ }
+
+ return dest_ptr;
+}
+EXPORT_SYMBOL(devm_pci_remap_cfg_resource);
static void __pci_set_master(struct pci_dev *dev, bool enable)
{
@@ -3773,24 +3860,41 @@ static void pci_flr_wait(struct pci_dev *dev)
(i - 1) * 100);
}
-static int pcie_flr(struct pci_dev *dev, int probe)
+/**
+ * pcie_has_flr - check if a device supports function level resets
+ * @dev: device to check
+ *
+ * Returns true if the device advertises support for PCIe function level
+ * resets.
+ */
+static bool pcie_has_flr(struct pci_dev *dev)
{
u32 cap;
+ if (dev->dev_flags & PCI_DEV_FLAGS_NO_FLR_RESET)
+ return false;
+
pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
- if (!(cap & PCI_EXP_DEVCAP_FLR))
- return -ENOTTY;
+ return cap & PCI_EXP_DEVCAP_FLR;
+}
- if (probe)
- return 0;
-
+/**
+ * pcie_flr - initiate a PCIe function level reset
+ * @dev: device to reset
+ *
+ * Initiate a function level reset on @dev. The caller should ensure the
+ * device supports FLR before calling this function, e.g. by using the
+ * pcie_has_flr() helper.
+ */
+void pcie_flr(struct pci_dev *dev)
+{
if (!pci_wait_for_pending_transaction(dev))
dev_err(&dev->dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
pci_flr_wait(dev);
- return 0;
}
+EXPORT_SYMBOL_GPL(pcie_flr);
static int pci_af_flr(struct pci_dev *dev, int probe)
{
@@ -3801,6 +3905,9 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
if (!pos)
return -ENOTTY;
+ if (dev->dev_flags & PCI_DEV_FLAGS_NO_FLR_RESET)
+ return -ENOTTY;
+
pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
return -ENOTTY;
@@ -3971,9 +4078,12 @@ static int __pci_dev_reset(struct pci_dev *dev, int probe)
if (rc != -ENOTTY)
goto done;
- rc = pcie_flr(dev, probe);
- if (rc != -ENOTTY)
+ if (pcie_has_flr(dev)) {
+ if (!probe)
+ pcie_flr(dev);
+ rc = 0;
goto done;
+ }
rc = pci_af_flr(dev, probe);
if (rc != -ENOTTY)
@@ -4932,6 +5042,8 @@ bool pci_device_is_present(struct pci_dev *pdev)
{
u32 v;
+ if (pci_dev_is_disconnected(pdev))
+ return false;
return pci_bus_read_dev_vendor_id(pdev->bus, pdev->devfn, &v, 0);
}
EXPORT_SYMBOL_GPL(pci_device_is_present);
@@ -4947,6 +5059,11 @@ void pci_ignore_hotplug(struct pci_dev *dev)
}
EXPORT_SYMBOL_GPL(pci_ignore_hotplug);
+resource_size_t __weak pcibios_default_alignment(void)
+{
+ return 0;
+}
+
#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
static DEFINE_SPINLOCK(resource_alignment_lock);
@@ -4954,22 +5071,25 @@ static DEFINE_SPINLOCK(resource_alignment_lock);
/**
* pci_specified_resource_alignment - get resource alignment specified by user.
* @dev: the PCI device to get
+ * @resize: whether or not to change resources' size when reassigning alignment
*
* RETURNS: Resource alignment if it is specified.
* Zero if it is not specified.
*/
-static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
+static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev,
+ bool *resize)
{
int seg, bus, slot, func, align_order, count;
unsigned short vendor, device, subsystem_vendor, subsystem_device;
- resource_size_t align = 0;
+ resource_size_t align = pcibios_default_alignment();
char *p;
spin_lock(&resource_alignment_lock);
p = resource_alignment_param;
- if (!*p)
+ if (!*p && !align)
goto out;
if (pci_has_flag(PCI_PROBE_ONLY)) {
+ align = 0;
pr_info_once("PCI: Ignoring requested alignments (PCI_PROBE_ONLY)\n");
goto out;
}
@@ -4999,6 +5119,7 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
(!device || (device == dev->device)) &&
(!subsystem_vendor || (subsystem_vendor == dev->subsystem_vendor)) &&
(!subsystem_device || (subsystem_device == dev->subsystem_device))) {
+ *resize = true;
if (align_order == -1)
align = PAGE_SIZE;
else
@@ -5024,6 +5145,7 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
bus == dev->bus->number &&
slot == PCI_SLOT(dev->devfn) &&
func == PCI_FUNC(dev->devfn)) {
+ *resize = true;
if (align_order == -1)
align = PAGE_SIZE;
else
@@ -5043,6 +5165,68 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
return align;
}
+static void pci_request_resource_alignment(struct pci_dev *dev, int bar,
+ resource_size_t align, bool resize)
+{
+ struct resource *r = &dev->resource[bar];
+ resource_size_t size;
+
+ if (!(r->flags & IORESOURCE_MEM))
+ return;
+
+ if (r->flags & IORESOURCE_PCI_FIXED) {
+ dev_info(&dev->dev, "BAR%d %pR: ignoring requested alignment %#llx\n",
+ bar, r, (unsigned long long)align);
+ return;
+ }
+
+ size = resource_size(r);
+ if (size >= align)
+ return;
+
+ /*
+ * Increase the alignment of the resource. There are two ways we
+ * can do this:
+ *
+ * 1) Increase the size of the resource. BARs are aligned on their
+ * size, so when we reallocate space for this resource, we'll
+ * allocate it with the larger alignment. This also prevents
+ * assignment of any other BARs inside the alignment region, so
+ * if we're requesting page alignment, this means no other BARs
+ * will share the page.
+ *
+ * The disadvantage is that this makes the resource larger than
+ * the hardware BAR, which may break drivers that compute things
+ * based on the resource size, e.g., to find registers at a
+ * fixed offset before the end of the BAR.
+ *
+ * 2) Retain the resource size, but use IORESOURCE_STARTALIGN and
+ * set r->start to the desired alignment. By itself this
+ * doesn't prevent other BARs being put inside the alignment
+ * region, but if we realign *every* resource of every device in
+ * the system, none of them will share an alignment region.
+ *
+ * When the user has requested alignment for only some devices via
+ * the "pci=resource_alignment" argument, "resize" is true and we
+ * use the first method. Otherwise we assume we're aligning all
+ * devices and we use the second.
+ */
+
+ dev_info(&dev->dev, "BAR%d %pR: requesting alignment to %#llx\n",
+ bar, r, (unsigned long long)align);
+
+ if (resize) {
+ r->start = 0;
+ r->end = align - 1;
+ } else {
+ r->flags &= ~IORESOURCE_SIZEALIGN;
+ r->flags |= IORESOURCE_STARTALIGN;
+ r->start = align;
+ r->end = r->start + size - 1;
+ }
+ r->flags |= IORESOURCE_UNSET;
+}
+
/*
* This function disables memory decoding and releases memory resources
* of the device specified by kernel's boot parameter 'pci=resource_alignment='.
@@ -5054,8 +5238,9 @@ void pci_reassigndev_resource_alignment(struct pci_dev *dev)
{
int i;
struct resource *r;
- resource_size_t align, size;
+ resource_size_t align;
u16 command;
+ bool resize = false;
/*
* VF BARs are read-only zero according to SR-IOV spec r1.1, sec
@@ -5067,7 +5252,7 @@ void pci_reassigndev_resource_alignment(struct pci_dev *dev)
return;
/* check if specified PCI is target device to reassign */
- align = pci_specified_resource_alignment(dev);
+ align = pci_specified_resource_alignment(dev, &resize);
if (!align)
return;
@@ -5084,28 +5269,11 @@ void pci_reassigndev_resource_alignment(struct pci_dev *dev)
command &= ~PCI_COMMAND_MEMORY;
pci_write_config_word(dev, PCI_COMMAND, command);
- for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
- r = &dev->resource[i];
- if (!(r->flags & IORESOURCE_MEM))
- continue;
- if (r->flags & IORESOURCE_PCI_FIXED) {
- dev_info(&dev->dev, "Ignoring requested alignment for BAR%d: %pR\n",
- i, r);
- continue;
- }
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+ pci_request_resource_alignment(dev, i, align, resize);
- size = resource_size(r);
- if (size < align) {
- size = align;
- dev_info(&dev->dev,
- "Rounding up size of resource #%d to %#llx.\n",
- i, (unsigned long long)size);
- }
- r->flags |= IORESOURCE_UNSET;
- r->end = size - 1;
- r->start = 0;
- }
- /* Need to disable bridge's resource window,
+ /*
+ * Need to disable bridge's resource window,
* to enable the kernel to reassign new resource
* window later on.
*/
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 4dbf9f9..f8113e5 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -23,14 +23,14 @@ void pci_create_firmware_label_files(struct pci_dev *pdev);
void pci_remove_firmware_label_files(struct pci_dev *pdev);
#endif
void pci_cleanup_rom(struct pci_dev *dev);
-#ifdef HAVE_PCI_MMAP
+
enum pci_mmap_api {
PCI_MMAP_SYSFS, /* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
PCI_MMAP_PROCFS /* mmap on /proc/bus/pci/<BDF> */
};
int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vmai,
enum pci_mmap_api mmap_api);
-#endif
+
int pci_probe_reset_function(struct pci_dev *dev);
/**
@@ -274,8 +274,23 @@ struct pci_sriov {
struct pci_dev *self; /* this PF */
struct mutex lock; /* lock for setting sriov_numvfs in sysfs */
resource_size_t barsz[PCI_SRIOV_NUM_BARS]; /* VF BAR size */
+ bool drivers_autoprobe; /* auto probing of VFs by driver */
};
+/* pci_dev priv_flags */
+#define PCI_DEV_DISCONNECTED 0
+
+static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)
+{
+ set_bit(PCI_DEV_DISCONNECTED, &dev->priv_flags);
+ return 0;
+}
+
+static inline bool pci_dev_is_disconnected(const struct pci_dev *dev)
+{
+ return test_bit(PCI_DEV_DISCONNECTED, &dev->priv_flags);
+}
+
#ifdef CONFIG_PCI_ATS
void pci_restore_ats_state(struct pci_dev *dev);
#else
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index d4d70ef..77d2ca9 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pcieport_if.h>
+#include "../pci.h"
struct dpc_dev {
struct pcie_device *dev;
@@ -66,6 +67,10 @@ static void interrupt_event_handler(struct work_struct *work)
list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
bus_list) {
pci_dev_get(dev);
+ pci_dev_set_disconnected(dev, NULL);
+ if (pci_has_subordinate(dev))
+ pci_walk_bus(dev->subordinate,
+ pci_dev_set_disconnected, NULL);
pci_stop_and_remove_bus_device(dev);
pci_dev_put(dev);
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 90592d4..19c8950 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -175,7 +175,7 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
struct resource *res, unsigned int pos)
{
- u32 l, sz, mask;
+ u32 l = 0, sz = 0, mask;
u64 l64, sz64, mask64;
u16 orig_cmd;
struct pci_bus_region region, inverted_region;
@@ -231,7 +231,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
res->flags |= IORESOURCE_ROM_ENABLE;
l64 = l & PCI_ROM_ADDRESS_MASK;
sz64 = sz & PCI_ROM_ADDRESS_MASK;
- mask64 = (u32)PCI_ROM_ADDRESS_MASK;
+ mask64 = PCI_ROM_ADDRESS_MASK;
}
if (res->flags & IORESOURCE_MEM_64) {
@@ -1914,33 +1914,6 @@ static void pci_set_msi_domain(struct pci_dev *dev)
dev_set_msi_domain(&dev->dev, d);
}
-/**
- * pci_dma_configure - Setup DMA configuration
- * @dev: ptr to pci_dev struct of the PCI device
- *
- * Function to update PCI devices's DMA configuration using the same
- * info from the OF node or ACPI node of host bridge's parent (if any).
- */
-static void pci_dma_configure(struct pci_dev *dev)
-{
- struct device *bridge = pci_get_host_bridge_device(dev);
-
- if (IS_ENABLED(CONFIG_OF) &&
- bridge->parent && bridge->parent->of_node) {
- of_dma_configure(&dev->dev, bridge->parent->of_node);
- } else if (has_acpi_companion(bridge)) {
- struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
- enum dev_dma_attr attr = acpi_get_dma_attr(adev);
-
- if (attr == DEV_DMA_NOT_SUPPORTED)
- dev_warn(&dev->dev, "DMA not supported.\n");
- else
- acpi_dma_configure(&dev->dev, attr);
- }
-
- pci_put_host_bridge_device(bridge);
-}
-
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
int ret;
@@ -1954,7 +1927,6 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
dev->dev.dma_mask = &dev->dma_mask;
dev->dev.dma_parms = &dev->dma_parms;
dev->dev.coherent_dma_mask = 0xffffffffull;
- pci_dma_configure(dev);
pci_set_dma_max_seg_size(dev, 65536);
pci_set_dma_seg_boundary(dev, 0xffffffff);
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index f82710a..098360d 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -202,6 +202,8 @@ static long proc_bus_pci_ioctl(struct file *file, unsigned int cmd,
#ifdef HAVE_PCI_MMAP
case PCIIOC_MMAP_IS_IO:
+ if (!arch_can_pci_mmap_io())
+ return -EINVAL;
fpriv->mmap_state = pci_mmap_io;
break;
@@ -210,14 +212,15 @@ static long proc_bus_pci_ioctl(struct file *file, unsigned int cmd,
break;
case PCIIOC_WRITE_COMBINE:
- if (arg)
- fpriv->write_combine = 1;
- else
- fpriv->write_combine = 0;
- break;
-
+ if (arch_can_pci_mmap_wc()) {
+ if (arg)
+ fpriv->write_combine = 1;
+ else
+ fpriv->write_combine = 0;
+ break;
+ }
+ /* If arch decided it can't, fall through... */
#endif /* HAVE_PCI_MMAP */
-
default:
ret = -EINVAL;
break;
@@ -231,25 +234,35 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
{
struct pci_dev *dev = PDE_DATA(file_inode(file));
struct pci_filp_private *fpriv = file->private_data;
- int i, ret, write_combine;
+ int i, ret, write_combine = 0, res_bit = IORESOURCE_MEM;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
+ if (fpriv->mmap_state == pci_mmap_io) {
+ if (!arch_can_pci_mmap_io())
+ return -EINVAL;
+ res_bit = IORESOURCE_IO;
+ }
+
/* Make sure the caller is mapping a real resource for this device */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- if (pci_mmap_fits(dev, i, vma, PCI_MMAP_PROCFS))
+ if (dev->resource[i].flags & res_bit &&
+ pci_mmap_fits(dev, i, vma, PCI_MMAP_PROCFS))
break;
}
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
- if (fpriv->mmap_state == pci_mmap_mem)
- write_combine = fpriv->write_combine;
- else
- write_combine = 0;
- ret = pci_mmap_page_range(dev, vma,
+ if (fpriv->mmap_state == pci_mmap_mem &&
+ fpriv->write_combine) {
+ if (dev->resource[i].flags & IORESOURCE_PREFETCH)
+ write_combine = 1;
+ else
+ return -EINVAL;
+ }
+ ret = pci_mmap_page_range(dev, i, vma,
fpriv->mmap_state, write_combine);
if (ret < 0)
return ret;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 6736836..085fb78 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1685,6 +1685,29 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
#ifdef CONFIG_X86_IO_APIC
+static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
+{
+ noioapicreroute = 1;
+ pr_info("%s detected: disable boot interrupt reroute\n", d->ident);
+
+ return 0;
+}
+
+static struct dmi_system_id boot_interrupt_dmi_table[] = {
+ /*
+ * Systems to exclude from boot interrupt reroute quirks
+ */
+ {
+ .callback = dmi_disable_ioapicreroute,
+ .ident = "ASUSTek Computer INC. M2N-LR",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M2N-LR"),
+ },
+ },
+ {}
+};
+
/*
* Boot interrupts on some chipsets cannot be turned off. For these chipsets,
* remap the original interrupt in the linux kernel to the boot interrupt, so
@@ -1693,6 +1716,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
*/
static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
{
+ dmi_check_system(boot_interrupt_dmi_table);
if (noioapicquirk || noioapicreroute)
return;
@@ -3642,19 +3666,11 @@ static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
*
* The 82599 supports FLR on VFs, but FLR support is reported only
* in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5).
- * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP.
+ * Thus we must call pcie_flr() directly without first checking if it is
+ * supported.
*/
-
- if (probe)
- return 0;
-
- if (!pci_wait_for_pending_transaction(dev))
- dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
-
- pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
-
- msleep(100);
-
+ if (!probe)
+ pcie_flr(dev);
return 0;
}
@@ -3759,20 +3775,7 @@ static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe)
PCI_MSIX_FLAGS_ENABLE |
PCI_MSIX_FLAGS_MASKALL);
- /*
- * Start of pcie_flr() code sequence. This reset code is a copy of
- * the guts of pcie_flr() because that's not an exported function.
- */
-
- if (!pci_wait_for_pending_transaction(dev))
- dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
-
- pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
- msleep(100);
-
- /*
- * End of pcie_flr() code sequence.
- */
+ pcie_flr(dev);
/*
* Restore the configuration information (BAR values, etc.) including
@@ -3939,6 +3942,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080,
DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias);
/* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */
DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias);
+/* ITE 8893 has the same problem as the 8892 */
+DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8893, quirk_use_pcie_bridge_dma_alias);
/* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */
DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias);
@@ -3958,6 +3963,20 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias);
/*
+ * The IOMMU and interrupt controller on Broadcom Vulcan/Cavium ThunderX2 are
+ * associated not at the root bus, but at a bridge below. This quirk avoids
+ * generating invalid DMA aliases.
+ */
+static void quirk_bridge_cavm_thrx2_pcie_root(struct pci_dev *pdev)
+{
+ pdev->dev_flags |= PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000,
+ quirk_bridge_cavm_thrx2_pcie_root);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084,
+ quirk_bridge_cavm_thrx2_pcie_root);
+
+/*
* Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero)
* class code. Fix it.
*/
@@ -4095,6 +4114,9 @@ static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags)
acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
+ if (!((dev->device >= 0xa000) && (dev->device <= 0xa0ff)))
+ return -ENOTTY;
+
return acs_flags ? 0 : 1;
}
@@ -4634,3 +4656,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2030, quirk_no_aersid);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2031, quirk_no_aersid);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2032, quirk_no_aersid);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2033, quirk_no_aersid);
+
+/* FLR may cause some 82579 devices to hang. */
+static void quirk_intel_no_flr(struct pci_dev *dev)
+{
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_intel_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_intel_no_flr);
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 33e0f03..4c6044a 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -60,6 +60,10 @@ int pci_for_each_dma_alias(struct pci_dev *pdev,
tmp = bus->self;
+ /* stop at bridge where translation unit is associated */
+ if (tmp->dev_flags & PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT)
+ return ret;
+
/*
* PCIe-to-PCI/X bridges alias transactions from downstream
* devices using the subordinate bus number (PCI Express to
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index cb389277..958da7d 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1066,10 +1066,10 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
r->flags = 0;
continue;
}
- size += r_size;
+ size += max(r_size, align);
/* Exclude ranges with size > align from
calculation of the alignment. */
- if (r_size == align)
+ if (r_size <= align)
aligns[order] += align;
if (order > max_order)
max_order = order;
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 4bc589e..85774b7 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -63,7 +63,7 @@ static void pci_std_update_resource(struct pci_dev *dev, int resno)
mask = (u32)PCI_BASE_ADDRESS_IO_MASK;
new |= res->flags & ~PCI_BASE_ADDRESS_IO_MASK;
} else if (resno == PCI_ROM_RESOURCE) {
- mask = (u32)PCI_ROM_ADDRESS_MASK;
+ mask = PCI_ROM_ADDRESS_MASK;
} else {
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK;
diff --git a/drivers/pci/switch/Kconfig b/drivers/pci/switch/Kconfig
new file mode 100644
index 0000000..4c49648
--- /dev/null
+++ b/drivers/pci/switch/Kconfig
@@ -0,0 +1,13 @@
+menu "PCI switch controller drivers"
+ depends on PCI
+
+config PCI_SW_SWITCHTEC
+ tristate "MicroSemi Switchtec PCIe Switch Management Driver"
+ help
+ Enables support for the management interface for the MicroSemi
+ Switchtec series of PCIe switches. Supports userspace access
+ to submit MRPC commands to the switch via /dev/switchtecX
+ devices. See <file:Documentation/switchtec.txt> for more
+ information.
+
+endmenu
diff --git a/drivers/pci/switch/Makefile b/drivers/pci/switch/Makefile
new file mode 100644
index 0000000..37d8cfb
--- /dev/null
+++ b/drivers/pci/switch/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PCI_SW_SWITCHTEC) += switchtec.o
diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
new file mode 100644
index 0000000..cc6e085
--- /dev/null
+++ b/drivers/pci/switch/switchtec.c
@@ -0,0 +1,1600 @@
+/*
+ * Microsemi Switchtec(tm) PCIe Management Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/switchtec_ioctl.h>
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/poll.h>
+#include <linux/pci.h>
+#include <linux/cdev.h>
+#include <linux/wait.h>
+
+MODULE_DESCRIPTION("Microsemi Switchtec(tm) PCIe Management Driver");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Microsemi Corporation");
+
+static int max_devices = 16;
+module_param(max_devices, int, 0644);
+MODULE_PARM_DESC(max_devices, "max number of switchtec device instances");
+
+static dev_t switchtec_devt;
+static struct class *switchtec_class;
+static DEFINE_IDA(switchtec_minor_ida);
+
+#define MICROSEMI_VENDOR_ID 0x11f8
+#define MICROSEMI_NTB_CLASSCODE 0x068000
+#define MICROSEMI_MGMT_CLASSCODE 0x058000
+
+#define SWITCHTEC_MRPC_PAYLOAD_SIZE 1024
+#define SWITCHTEC_MAX_PFF_CSR 48
+
+#define SWITCHTEC_EVENT_OCCURRED BIT(0)
+#define SWITCHTEC_EVENT_CLEAR BIT(0)
+#define SWITCHTEC_EVENT_EN_LOG BIT(1)
+#define SWITCHTEC_EVENT_EN_CLI BIT(2)
+#define SWITCHTEC_EVENT_EN_IRQ BIT(3)
+#define SWITCHTEC_EVENT_FATAL BIT(4)
+
+enum {
+ SWITCHTEC_GAS_MRPC_OFFSET = 0x0000,
+ SWITCHTEC_GAS_TOP_CFG_OFFSET = 0x1000,
+ SWITCHTEC_GAS_SW_EVENT_OFFSET = 0x1800,
+ SWITCHTEC_GAS_SYS_INFO_OFFSET = 0x2000,
+ SWITCHTEC_GAS_FLASH_INFO_OFFSET = 0x2200,
+ SWITCHTEC_GAS_PART_CFG_OFFSET = 0x4000,
+ SWITCHTEC_GAS_NTB_OFFSET = 0x10000,
+ SWITCHTEC_GAS_PFF_CSR_OFFSET = 0x134000,
+};
+
+struct mrpc_regs {
+ u8 input_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+ u8 output_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+ u32 cmd;
+ u32 status;
+ u32 ret_value;
+} __packed;
+
+enum mrpc_status {
+ SWITCHTEC_MRPC_STATUS_INPROGRESS = 1,
+ SWITCHTEC_MRPC_STATUS_DONE = 2,
+ SWITCHTEC_MRPC_STATUS_ERROR = 0xFF,
+ SWITCHTEC_MRPC_STATUS_INTERRUPTED = 0x100,
+};
+
+struct sw_event_regs {
+ u64 event_report_ctrl;
+ u64 reserved1;
+ u64 part_event_bitmap;
+ u64 reserved2;
+ u32 global_summary;
+ u32 reserved3[3];
+ u32 stack_error_event_hdr;
+ u32 stack_error_event_data;
+ u32 reserved4[4];
+ u32 ppu_error_event_hdr;
+ u32 ppu_error_event_data;
+ u32 reserved5[4];
+ u32 isp_error_event_hdr;
+ u32 isp_error_event_data;
+ u32 reserved6[4];
+ u32 sys_reset_event_hdr;
+ u32 reserved7[5];
+ u32 fw_exception_hdr;
+ u32 reserved8[5];
+ u32 fw_nmi_hdr;
+ u32 reserved9[5];
+ u32 fw_non_fatal_hdr;
+ u32 reserved10[5];
+ u32 fw_fatal_hdr;
+ u32 reserved11[5];
+ u32 twi_mrpc_comp_hdr;
+ u32 twi_mrpc_comp_data;
+ u32 reserved12[4];
+ u32 twi_mrpc_comp_async_hdr;
+ u32 twi_mrpc_comp_async_data;
+ u32 reserved13[4];
+ u32 cli_mrpc_comp_hdr;
+ u32 cli_mrpc_comp_data;
+ u32 reserved14[4];
+ u32 cli_mrpc_comp_async_hdr;
+ u32 cli_mrpc_comp_async_data;
+ u32 reserved15[4];
+ u32 gpio_interrupt_hdr;
+ u32 gpio_interrupt_data;
+ u32 reserved16[4];
+} __packed;
+
+struct sys_info_regs {
+ u32 device_id;
+ u32 device_version;
+ u32 firmware_version;
+ u32 reserved1;
+ u32 vendor_table_revision;
+ u32 table_format_version;
+ u32 partition_id;
+ u32 cfg_file_fmt_version;
+ u32 reserved2[58];
+ char vendor_id[8];
+ char product_id[16];
+ char product_revision[4];
+ char component_vendor[8];
+ u16 component_id;
+ u8 component_revision;
+} __packed;
+
+struct flash_info_regs {
+ u32 flash_part_map_upd_idx;
+
+ struct active_partition_info {
+ u32 address;
+ u32 build_version;
+ u32 build_string;
+ } active_img;
+
+ struct active_partition_info active_cfg;
+ struct active_partition_info inactive_img;
+ struct active_partition_info inactive_cfg;
+
+ u32 flash_length;
+
+ struct partition_info {
+ u32 address;
+ u32 length;
+ } cfg0;
+
+ struct partition_info cfg1;
+ struct partition_info img0;
+ struct partition_info img1;
+ struct partition_info nvlog;
+ struct partition_info vendor[8];
+};
+
+struct ntb_info_regs {
+ u8 partition_count;
+ u8 partition_id;
+ u16 reserved1;
+ u64 ep_map;
+ u16 requester_id;
+} __packed;
+
+struct part_cfg_regs {
+ u32 status;
+ u32 state;
+ u32 port_cnt;
+ u32 usp_port_mode;
+ u32 usp_pff_inst_id;
+ u32 vep_pff_inst_id;
+ u32 dsp_pff_inst_id[47];
+ u32 reserved1[11];
+ u16 vep_vector_number;
+ u16 usp_vector_number;
+ u32 port_event_bitmap;
+ u32 reserved2[3];
+ u32 part_event_summary;
+ u32 reserved3[3];
+ u32 part_reset_hdr;
+ u32 part_reset_data[5];
+ u32 mrpc_comp_hdr;
+ u32 mrpc_comp_data[5];
+ u32 mrpc_comp_async_hdr;
+ u32 mrpc_comp_async_data[5];
+ u32 dyn_binding_hdr;
+ u32 dyn_binding_data[5];
+ u32 reserved4[159];
+} __packed;
+
+enum {
+ SWITCHTEC_PART_CFG_EVENT_RESET = 1 << 0,
+ SWITCHTEC_PART_CFG_EVENT_MRPC_CMP = 1 << 1,
+ SWITCHTEC_PART_CFG_EVENT_MRPC_ASYNC_CMP = 1 << 2,
+ SWITCHTEC_PART_CFG_EVENT_DYN_PART_CMP = 1 << 3,
+};
+
+struct pff_csr_regs {
+ u16 vendor_id;
+ u16 device_id;
+ u32 pci_cfg_header[15];
+ u32 pci_cap_region[48];
+ u32 pcie_cap_region[448];
+ u32 indirect_gas_window[128];
+ u32 indirect_gas_window_off;
+ u32 reserved[127];
+ u32 pff_event_summary;
+ u32 reserved2[3];
+ u32 aer_in_p2p_hdr;
+ u32 aer_in_p2p_data[5];
+ u32 aer_in_vep_hdr;
+ u32 aer_in_vep_data[5];
+ u32 dpc_hdr;
+ u32 dpc_data[5];
+ u32 cts_hdr;
+ u32 cts_data[5];
+ u32 reserved3[6];
+ u32 hotplug_hdr;
+ u32 hotplug_data[5];
+ u32 ier_hdr;
+ u32 ier_data[5];
+ u32 threshold_hdr;
+ u32 threshold_data[5];
+ u32 power_mgmt_hdr;
+ u32 power_mgmt_data[5];
+ u32 tlp_throttling_hdr;
+ u32 tlp_throttling_data[5];
+ u32 force_speed_hdr;
+ u32 force_speed_data[5];
+ u32 credit_timeout_hdr;
+ u32 credit_timeout_data[5];
+ u32 link_state_hdr;
+ u32 link_state_data[5];
+ u32 reserved4[174];
+} __packed;
+
+struct switchtec_dev {
+ struct pci_dev *pdev;
+ struct device dev;
+ struct cdev cdev;
+
+ int partition;
+ int partition_count;
+ int pff_csr_count;
+ char pff_local[SWITCHTEC_MAX_PFF_CSR];
+
+ void __iomem *mmio;
+ struct mrpc_regs __iomem *mmio_mrpc;
+ struct sw_event_regs __iomem *mmio_sw_event;
+ struct sys_info_regs __iomem *mmio_sys_info;
+ struct flash_info_regs __iomem *mmio_flash_info;
+ struct ntb_info_regs __iomem *mmio_ntb;
+ struct part_cfg_regs __iomem *mmio_part_cfg;
+ struct part_cfg_regs __iomem *mmio_part_cfg_all;
+ struct pff_csr_regs __iomem *mmio_pff_csr;
+
+ /*
+ * The mrpc mutex must be held when accessing the other
+ * mrpc_ fields, alive flag and stuser->state field
+ */
+ struct mutex mrpc_mutex;
+ struct list_head mrpc_queue;
+ int mrpc_busy;
+ struct work_struct mrpc_work;
+ struct delayed_work mrpc_timeout;
+ bool alive;
+
+ wait_queue_head_t event_wq;
+ atomic_t event_cnt;
+};
+
+static struct switchtec_dev *to_stdev(struct device *dev)
+{
+ return container_of(dev, struct switchtec_dev, dev);
+}
+
+enum mrpc_state {
+ MRPC_IDLE = 0,
+ MRPC_QUEUED,
+ MRPC_RUNNING,
+ MRPC_DONE,
+};
+
+struct switchtec_user {
+ struct switchtec_dev *stdev;
+
+ enum mrpc_state state;
+
+ struct completion comp;
+ struct kref kref;
+ struct list_head list;
+
+ u32 cmd;
+ u32 status;
+ u32 return_code;
+ size_t data_len;
+ size_t read_len;
+ unsigned char data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+ int event_cnt;
+};
+
+static struct switchtec_user *stuser_create(struct switchtec_dev *stdev)
+{
+ struct switchtec_user *stuser;
+
+ stuser = kzalloc(sizeof(*stuser), GFP_KERNEL);
+ if (!stuser)
+ return ERR_PTR(-ENOMEM);
+
+ get_device(&stdev->dev);
+ stuser->stdev = stdev;
+ kref_init(&stuser->kref);
+ INIT_LIST_HEAD(&stuser->list);
+ init_completion(&stuser->comp);
+ stuser->event_cnt = atomic_read(&stdev->event_cnt);
+
+ dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
+
+ return stuser;
+}
+
+static void stuser_free(struct kref *kref)
+{
+ struct switchtec_user *stuser;
+
+ stuser = container_of(kref, struct switchtec_user, kref);
+
+ dev_dbg(&stuser->stdev->dev, "%s: %p\n", __func__, stuser);
+
+ put_device(&stuser->stdev->dev);
+ kfree(stuser);
+}
+
+static void stuser_put(struct switchtec_user *stuser)
+{
+ kref_put(&stuser->kref, stuser_free);
+}
+
+static void stuser_set_state(struct switchtec_user *stuser,
+ enum mrpc_state state)
+{
+ /* requires the mrpc_mutex to already be held when called */
+
+ const char * const state_names[] = {
+ [MRPC_IDLE] = "IDLE",
+ [MRPC_QUEUED] = "QUEUED",
+ [MRPC_RUNNING] = "RUNNING",
+ [MRPC_DONE] = "DONE",
+ };
+
+ stuser->state = state;
+
+ dev_dbg(&stuser->stdev->dev, "stuser state %p -> %s",
+ stuser, state_names[state]);
+}
+
+static void mrpc_complete_cmd(struct switchtec_dev *stdev);
+
+static void mrpc_cmd_submit(struct switchtec_dev *stdev)
+{
+ /* requires the mrpc_mutex to already be held when called */
+
+ struct switchtec_user *stuser;
+
+ if (stdev->mrpc_busy)
+ return;
+
+ if (list_empty(&stdev->mrpc_queue))
+ return;
+
+ stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
+ list);
+
+ stuser_set_state(stuser, MRPC_RUNNING);
+ stdev->mrpc_busy = 1;
+ memcpy_toio(&stdev->mmio_mrpc->input_data,
+ stuser->data, stuser->data_len);
+ iowrite32(stuser->cmd, &stdev->mmio_mrpc->cmd);
+
+ stuser->status = ioread32(&stdev->mmio_mrpc->status);
+ if (stuser->status != SWITCHTEC_MRPC_STATUS_INPROGRESS)
+ mrpc_complete_cmd(stdev);
+
+ schedule_delayed_work(&stdev->mrpc_timeout,
+ msecs_to_jiffies(500));
+}
+
+static int mrpc_queue_cmd(struct switchtec_user *stuser)
+{
+ /* requires the mrpc_mutex to already be held when called */
+
+ struct switchtec_dev *stdev = stuser->stdev;
+
+ kref_get(&stuser->kref);
+ stuser->read_len = sizeof(stuser->data);
+ stuser_set_state(stuser, MRPC_QUEUED);
+ init_completion(&stuser->comp);
+ list_add_tail(&stuser->list, &stdev->mrpc_queue);
+
+ mrpc_cmd_submit(stdev);
+
+ return 0;
+}
+
+static void mrpc_complete_cmd(struct switchtec_dev *stdev)
+{
+ /* requires the mrpc_mutex to already be held when called */
+ struct switchtec_user *stuser;
+
+ if (list_empty(&stdev->mrpc_queue))
+ return;
+
+ stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
+ list);
+
+ stuser->status = ioread32(&stdev->mmio_mrpc->status);
+ if (stuser->status == SWITCHTEC_MRPC_STATUS_INPROGRESS)
+ return;
+
+ stuser_set_state(stuser, MRPC_DONE);
+ stuser->return_code = 0;
+
+ if (stuser->status != SWITCHTEC_MRPC_STATUS_DONE)
+ goto out;
+
+ stuser->return_code = ioread32(&stdev->mmio_mrpc->ret_value);
+ if (stuser->return_code != 0)
+ goto out;
+
+ memcpy_fromio(stuser->data, &stdev->mmio_mrpc->output_data,
+ stuser->read_len);
+
+out:
+ complete_all(&stuser->comp);
+ list_del_init(&stuser->list);
+ stuser_put(stuser);
+ stdev->mrpc_busy = 0;
+
+ mrpc_cmd_submit(stdev);
+}
+
+static void mrpc_event_work(struct work_struct *work)
+{
+ struct switchtec_dev *stdev;
+
+ stdev = container_of(work, struct switchtec_dev, mrpc_work);
+
+ dev_dbg(&stdev->dev, "%s\n", __func__);
+
+ mutex_lock(&stdev->mrpc_mutex);
+ cancel_delayed_work(&stdev->mrpc_timeout);
+ mrpc_complete_cmd(stdev);
+ mutex_unlock(&stdev->mrpc_mutex);
+}
+
+static void mrpc_timeout_work(struct work_struct *work)
+{
+ struct switchtec_dev *stdev;
+ u32 status;
+
+ stdev = container_of(work, struct switchtec_dev, mrpc_timeout.work);
+
+ dev_dbg(&stdev->dev, "%s\n", __func__);
+
+ mutex_lock(&stdev->mrpc_mutex);
+
+ status = ioread32(&stdev->mmio_mrpc->status);
+ if (status == SWITCHTEC_MRPC_STATUS_INPROGRESS) {
+ schedule_delayed_work(&stdev->mrpc_timeout,
+ msecs_to_jiffies(500));
+ goto out;
+ }
+
+ mrpc_complete_cmd(stdev);
+
+out:
+ mutex_unlock(&stdev->mrpc_mutex);
+}
+
+static ssize_t device_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct switchtec_dev *stdev = to_stdev(dev);
+ u32 ver;
+
+ ver = ioread32(&stdev->mmio_sys_info->device_version);
+
+ return sprintf(buf, "%x\n", ver);
+}
+static DEVICE_ATTR_RO(device_version);
+
+static ssize_t fw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct switchtec_dev *stdev = to_stdev(dev);
+ u32 ver;
+
+ ver = ioread32(&stdev->mmio_sys_info->firmware_version);
+
+ return sprintf(buf, "%08x\n", ver);
+}
+static DEVICE_ATTR_RO(fw_version);
+
+static ssize_t io_string_show(char *buf, void __iomem *attr, size_t len)
+{
+ int i;
+
+ memcpy_fromio(buf, attr, len);
+ buf[len] = '\n';
+ buf[len + 1] = 0;
+
+ for (i = len - 1; i > 0; i--) {
+ if (buf[i] != ' ')
+ break;
+ buf[i] = '\n';
+ buf[i + 1] = 0;
+ }
+
+ return strlen(buf);
+}
+
+#define DEVICE_ATTR_SYS_INFO_STR(field) \
+static ssize_t field ## _show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct switchtec_dev *stdev = to_stdev(dev); \
+ return io_string_show(buf, &stdev->mmio_sys_info->field, \
+ sizeof(stdev->mmio_sys_info->field)); \
+} \
+\
+static DEVICE_ATTR_RO(field)
+
+DEVICE_ATTR_SYS_INFO_STR(vendor_id);
+DEVICE_ATTR_SYS_INFO_STR(product_id);
+DEVICE_ATTR_SYS_INFO_STR(product_revision);
+DEVICE_ATTR_SYS_INFO_STR(component_vendor);
+
+static ssize_t component_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct switchtec_dev *stdev = to_stdev(dev);
+ int id = ioread16(&stdev->mmio_sys_info->component_id);
+
+ return sprintf(buf, "PM%04X\n", id);
+}
+static DEVICE_ATTR_RO(component_id);
+
+static ssize_t component_revision_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct switchtec_dev *stdev = to_stdev(dev);
+ int rev = ioread8(&stdev->mmio_sys_info->component_revision);
+
+ return sprintf(buf, "%d\n", rev);
+}
+static DEVICE_ATTR_RO(component_revision);
+
+static ssize_t partition_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct switchtec_dev *stdev = to_stdev(dev);
+
+ return sprintf(buf, "%d\n", stdev->partition);
+}
+static DEVICE_ATTR_RO(partition);
+
+static ssize_t partition_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct switchtec_dev *stdev = to_stdev(dev);
+
+ return sprintf(buf, "%d\n", stdev->partition_count);
+}
+static DEVICE_ATTR_RO(partition_count);
+
+static struct attribute *switchtec_device_attrs[] = {
+ &dev_attr_device_version.attr,
+ &dev_attr_fw_version.attr,
+ &dev_attr_vendor_id.attr,
+ &dev_attr_product_id.attr,
+ &dev_attr_product_revision.attr,
+ &dev_attr_component_vendor.attr,
+ &dev_attr_component_id.attr,
+ &dev_attr_component_revision.attr,
+ &dev_attr_partition.attr,
+ &dev_attr_partition_count.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(switchtec_device);
+
+static int switchtec_dev_open(struct inode *inode, struct file *filp)
+{
+ struct switchtec_dev *stdev;
+ struct switchtec_user *stuser;
+
+ stdev = container_of(inode->i_cdev, struct switchtec_dev, cdev);
+
+ stuser = stuser_create(stdev);
+ if (IS_ERR(stuser))
+ return PTR_ERR(stuser);
+
+ filp->private_data = stuser;
+ nonseekable_open(inode, filp);
+
+ dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
+
+ return 0;
+}
+
+static int switchtec_dev_release(struct inode *inode, struct file *filp)
+{
+ struct switchtec_user *stuser = filp->private_data;
+
+ stuser_put(stuser);
+
+ return 0;
+}
+
+static int lock_mutex_and_test_alive(struct switchtec_dev *stdev)
+{
+ if (mutex_lock_interruptible(&stdev->mrpc_mutex))
+ return -EINTR;
+
+ if (!stdev->alive) {
+ mutex_unlock(&stdev->mrpc_mutex);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static ssize_t switchtec_dev_write(struct file *filp, const char __user *data,
+ size_t size, loff_t *off)
+{
+ struct switchtec_user *stuser = filp->private_data;
+ struct switchtec_dev *stdev = stuser->stdev;
+ int rc;
+
+ if (size < sizeof(stuser->cmd) ||
+ size > sizeof(stuser->cmd) + sizeof(stuser->data))
+ return -EINVAL;
+
+ stuser->data_len = size - sizeof(stuser->cmd);
+
+ rc = lock_mutex_and_test_alive(stdev);
+ if (rc)
+ return rc;
+
+ if (stuser->state != MRPC_IDLE) {
+ rc = -EBADE;
+ goto out;
+ }
+
+ rc = copy_from_user(&stuser->cmd, data, sizeof(stuser->cmd));
+ if (rc) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ data += sizeof(stuser->cmd);
+ rc = copy_from_user(&stuser->data, data, size - sizeof(stuser->cmd));
+ if (rc) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ rc = mrpc_queue_cmd(stuser);
+
+out:
+ mutex_unlock(&stdev->mrpc_mutex);
+
+ if (rc)
+ return rc;
+
+ return size;
+}
+
+static ssize_t switchtec_dev_read(struct file *filp, char __user *data,
+ size_t size, loff_t *off)
+{
+ struct switchtec_user *stuser = filp->private_data;
+ struct switchtec_dev *stdev = stuser->stdev;
+ int rc;
+
+ if (size < sizeof(stuser->cmd) ||
+ size > sizeof(stuser->cmd) + sizeof(stuser->data))
+ return -EINVAL;
+
+ rc = lock_mutex_and_test_alive(stdev);
+ if (rc)
+ return rc;
+
+ if (stuser->state == MRPC_IDLE) {
+ mutex_unlock(&stdev->mrpc_mutex);
+ return -EBADE;
+ }
+
+ stuser->read_len = size - sizeof(stuser->return_code);
+
+ mutex_unlock(&stdev->mrpc_mutex);
+
+ if (filp->f_flags & O_NONBLOCK) {
+ if (!try_wait_for_completion(&stuser->comp))
+ return -EAGAIN;
+ } else {
+ rc = wait_for_completion_interruptible(&stuser->comp);
+ if (rc < 0)
+ return rc;
+ }
+
+ rc = lock_mutex_and_test_alive(stdev);
+ if (rc)
+ return rc;
+
+ if (stuser->state != MRPC_DONE) {
+ mutex_unlock(&stdev->mrpc_mutex);
+ return -EBADE;
+ }
+
+ rc = copy_to_user(data, &stuser->return_code,
+ sizeof(stuser->return_code));
+ if (rc) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ data += sizeof(stuser->return_code);
+ rc = copy_to_user(data, &stuser->data,
+ size - sizeof(stuser->return_code));
+ if (rc) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ stuser_set_state(stuser, MRPC_IDLE);
+
+out:
+ mutex_unlock(&stdev->mrpc_mutex);
+
+ if (stuser->status == SWITCHTEC_MRPC_STATUS_DONE)
+ return size;
+ else if (stuser->status == SWITCHTEC_MRPC_STATUS_INTERRUPTED)
+ return -ENXIO;
+ else
+ return -EBADMSG;
+}
+
+static unsigned int switchtec_dev_poll(struct file *filp, poll_table *wait)
+{
+ struct switchtec_user *stuser = filp->private_data;
+ struct switchtec_dev *stdev = stuser->stdev;
+ int ret = 0;
+
+ poll_wait(filp, &stuser->comp.wait, wait);
+ poll_wait(filp, &stdev->event_wq, wait);
+
+ if (lock_mutex_and_test_alive(stdev))
+ return POLLIN | POLLRDHUP | POLLOUT | POLLERR | POLLHUP;
+
+ mutex_unlock(&stdev->mrpc_mutex);
+
+ if (try_wait_for_completion(&stuser->comp))
+ ret |= POLLIN | POLLRDNORM;
+
+ if (stuser->event_cnt != atomic_read(&stdev->event_cnt))
+ ret |= POLLPRI | POLLRDBAND;
+
+ return ret;
+}
+
+static int ioctl_flash_info(struct switchtec_dev *stdev,
+ struct switchtec_ioctl_flash_info __user *uinfo)
+{
+ struct switchtec_ioctl_flash_info info = {0};
+ struct flash_info_regs __iomem *fi = stdev->mmio_flash_info;
+
+ info.flash_length = ioread32(&fi->flash_length);
+ info.num_partitions = SWITCHTEC_IOCTL_NUM_PARTITIONS;
+
+ if (copy_to_user(uinfo, &info, sizeof(info)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static void set_fw_info_part(struct switchtec_ioctl_flash_part_info *info,
+ struct partition_info __iomem *pi)
+{
+ info->address = ioread32(&pi->address);
+ info->length = ioread32(&pi->length);
+}
+
+static int ioctl_flash_part_info(struct switchtec_dev *stdev,
+ struct switchtec_ioctl_flash_part_info __user *uinfo)
+{
+ struct switchtec_ioctl_flash_part_info info = {0};
+ struct flash_info_regs __iomem *fi = stdev->mmio_flash_info;
+ u32 active_addr = -1;
+
+ if (copy_from_user(&info, uinfo, sizeof(info)))
+ return -EFAULT;
+
+ switch (info.flash_partition) {
+ case SWITCHTEC_IOCTL_PART_CFG0:
+ active_addr = ioread32(&fi->active_cfg);
+ set_fw_info_part(&info, &fi->cfg0);
+ break;
+ case SWITCHTEC_IOCTL_PART_CFG1:
+ active_addr = ioread32(&fi->active_cfg);
+ set_fw_info_part(&info, &fi->cfg1);
+ break;
+ case SWITCHTEC_IOCTL_PART_IMG0:
+ active_addr = ioread32(&fi->active_img);
+ set_fw_info_part(&info, &fi->img0);
+ break;
+ case SWITCHTEC_IOCTL_PART_IMG1:
+ active_addr = ioread32(&fi->active_img);
+ set_fw_info_part(&info, &fi->img1);
+ break;
+ case SWITCHTEC_IOCTL_PART_NVLOG:
+ set_fw_info_part(&info, &fi->nvlog);
+ break;
+ case SWITCHTEC_IOCTL_PART_VENDOR0:
+ set_fw_info_part(&info, &fi->vendor[0]);
+ break;
+ case SWITCHTEC_IOCTL_PART_VENDOR1:
+ set_fw_info_part(&info, &fi->vendor[1]);
+ break;
+ case SWITCHTEC_IOCTL_PART_VENDOR2:
+ set_fw_info_part(&info, &fi->vendor[2]);
+ break;
+ case SWITCHTEC_IOCTL_PART_VENDOR3:
+ set_fw_info_part(&info, &fi->vendor[3]);
+ break;
+ case SWITCHTEC_IOCTL_PART_VENDOR4:
+ set_fw_info_part(&info, &fi->vendor[4]);
+ break;
+ case SWITCHTEC_IOCTL_PART_VENDOR5:
+ set_fw_info_part(&info, &fi->vendor[5]);
+ break;
+ case SWITCHTEC_IOCTL_PART_VENDOR6:
+ set_fw_info_part(&info, &fi->vendor[6]);
+ break;
+ case SWITCHTEC_IOCTL_PART_VENDOR7:
+ set_fw_info_part(&info, &fi->vendor[7]);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (info.address == active_addr)
+ info.active = 1;
+
+ if (copy_to_user(uinfo, &info, sizeof(info)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int ioctl_event_summary(struct switchtec_dev *stdev,
+ struct switchtec_user *stuser,
+ struct switchtec_ioctl_event_summary __user *usum)
+{
+ struct switchtec_ioctl_event_summary s = {0};
+ int i;
+ u32 reg;
+
+ s.global = ioread32(&stdev->mmio_sw_event->global_summary);
+ s.part_bitmap = ioread32(&stdev->mmio_sw_event->part_event_bitmap);
+ s.local_part = ioread32(&stdev->mmio_part_cfg->part_event_summary);
+
+ for (i = 0; i < stdev->partition_count; i++) {
+ reg = ioread32(&stdev->mmio_part_cfg_all[i].part_event_summary);
+ s.part[i] = reg;
+ }
+
+ for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
+ reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
+ if (reg != MICROSEMI_VENDOR_ID)
+ break;
+
+ reg = ioread32(&stdev->mmio_pff_csr[i].pff_event_summary);
+ s.pff[i] = reg;
+ }
+
+ if (copy_to_user(usum, &s, sizeof(s)))
+ return -EFAULT;
+
+ stuser->event_cnt = atomic_read(&stdev->event_cnt);
+
+ return 0;
+}
+
+static u32 __iomem *global_ev_reg(struct switchtec_dev *stdev,
+ size_t offset, int index)
+{
+ return (void __iomem *)stdev->mmio_sw_event + offset;
+}
+
+static u32 __iomem *part_ev_reg(struct switchtec_dev *stdev,
+ size_t offset, int index)
+{
+ return (void __iomem *)&stdev->mmio_part_cfg_all[index] + offset;
+}
+
+static u32 __iomem *pff_ev_reg(struct switchtec_dev *stdev,
+ size_t offset, int index)
+{
+ return (void __iomem *)&stdev->mmio_pff_csr[index] + offset;
+}
+
+#define EV_GLB(i, r)[i] = {offsetof(struct sw_event_regs, r), global_ev_reg}
+#define EV_PAR(i, r)[i] = {offsetof(struct part_cfg_regs, r), part_ev_reg}
+#define EV_PFF(i, r)[i] = {offsetof(struct pff_csr_regs, r), pff_ev_reg}
+
+const struct event_reg {
+ size_t offset;
+ u32 __iomem *(*map_reg)(struct switchtec_dev *stdev,
+ size_t offset, int index);
+} event_regs[] = {
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_STACK_ERROR, stack_error_event_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_PPU_ERROR, ppu_error_event_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_ISP_ERROR, isp_error_event_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_SYS_RESET, sys_reset_event_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_EXC, fw_exception_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_NMI, fw_nmi_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_NON_FATAL, fw_non_fatal_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_FATAL, fw_fatal_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP, twi_mrpc_comp_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP_ASYNC,
+ twi_mrpc_comp_async_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP, cli_mrpc_comp_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP_ASYNC,
+ cli_mrpc_comp_async_hdr),
+ EV_GLB(SWITCHTEC_IOCTL_EVENT_GPIO_INT, gpio_interrupt_hdr),
+ EV_PAR(SWITCHTEC_IOCTL_EVENT_PART_RESET, part_reset_hdr),
+ EV_PAR(SWITCHTEC_IOCTL_EVENT_MRPC_COMP, mrpc_comp_hdr),
+ EV_PAR(SWITCHTEC_IOCTL_EVENT_MRPC_COMP_ASYNC, mrpc_comp_async_hdr),
+ EV_PAR(SWITCHTEC_IOCTL_EVENT_DYN_PART_BIND_COMP, dyn_binding_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_AER_IN_P2P, aer_in_p2p_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_AER_IN_VEP, aer_in_vep_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_DPC, dpc_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_CTS, cts_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_HOTPLUG, hotplug_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_IER, ier_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_THRESH, threshold_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_POWER_MGMT, power_mgmt_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_TLP_THROTTLING, tlp_throttling_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_FORCE_SPEED, force_speed_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_CREDIT_TIMEOUT, credit_timeout_hdr),
+ EV_PFF(SWITCHTEC_IOCTL_EVENT_LINK_STATE, link_state_hdr),
+};
+
+static u32 __iomem *event_hdr_addr(struct switchtec_dev *stdev,
+ int event_id, int index)
+{
+ size_t off;
+
+ if (event_id < 0 || event_id >= SWITCHTEC_IOCTL_MAX_EVENTS)
+ return ERR_PTR(-EINVAL);
+
+ off = event_regs[event_id].offset;
+
+ if (event_regs[event_id].map_reg == part_ev_reg) {
+ if (index == SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX)
+ index = stdev->partition;
+ else if (index < 0 || index >= stdev->partition_count)
+ return ERR_PTR(-EINVAL);
+ } else if (event_regs[event_id].map_reg == pff_ev_reg) {
+ if (index < 0 || index >= stdev->pff_csr_count)
+ return ERR_PTR(-EINVAL);
+ }
+
+ return event_regs[event_id].map_reg(stdev, off, index);
+}
+
+static int event_ctl(struct switchtec_dev *stdev,
+ struct switchtec_ioctl_event_ctl *ctl)
+{
+ int i;
+ u32 __iomem *reg;
+ u32 hdr;
+
+ reg = event_hdr_addr(stdev, ctl->event_id, ctl->index);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ hdr = ioread32(reg);
+ for (i = 0; i < ARRAY_SIZE(ctl->data); i++)
+ ctl->data[i] = ioread32(®[i + 1]);
+
+ ctl->occurred = hdr & SWITCHTEC_EVENT_OCCURRED;
+ ctl->count = (hdr >> 5) & 0xFF;
+
+ if (!(ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_CLEAR))
+ hdr &= ~SWITCHTEC_EVENT_CLEAR;
+ if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL)
+ hdr |= SWITCHTEC_EVENT_EN_IRQ;
+ if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_POLL)
+ hdr &= ~SWITCHTEC_EVENT_EN_IRQ;
+ if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG)
+ hdr |= SWITCHTEC_EVENT_EN_LOG;
+ if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_LOG)
+ hdr &= ~SWITCHTEC_EVENT_EN_LOG;
+ if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI)
+ hdr |= SWITCHTEC_EVENT_EN_CLI;
+ if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_CLI)
+ hdr &= ~SWITCHTEC_EVENT_EN_CLI;
+ if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL)
+ hdr |= SWITCHTEC_EVENT_FATAL;
+ if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_FATAL)
+ hdr &= ~SWITCHTEC_EVENT_FATAL;
+
+ if (ctl->flags)
+ iowrite32(hdr, reg);
+
+ ctl->flags = 0;
+ if (hdr & SWITCHTEC_EVENT_EN_IRQ)
+ ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL;
+ if (hdr & SWITCHTEC_EVENT_EN_LOG)
+ ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG;
+ if (hdr & SWITCHTEC_EVENT_EN_CLI)
+ ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI;
+ if (hdr & SWITCHTEC_EVENT_FATAL)
+ ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL;
+
+ return 0;
+}
+
+static int ioctl_event_ctl(struct switchtec_dev *stdev,
+ struct switchtec_ioctl_event_ctl __user *uctl)
+{
+ int ret;
+ int nr_idxs;
+ struct switchtec_ioctl_event_ctl ctl;
+
+ if (copy_from_user(&ctl, uctl, sizeof(ctl)))
+ return -EFAULT;
+
+ if (ctl.event_id >= SWITCHTEC_IOCTL_MAX_EVENTS)
+ return -EINVAL;
+
+ if (ctl.flags & SWITCHTEC_IOCTL_EVENT_FLAG_UNUSED)
+ return -EINVAL;
+
+ if (ctl.index == SWITCHTEC_IOCTL_EVENT_IDX_ALL) {
+ if (event_regs[ctl.event_id].map_reg == global_ev_reg)
+ nr_idxs = 1;
+ else if (event_regs[ctl.event_id].map_reg == part_ev_reg)
+ nr_idxs = stdev->partition_count;
+ else if (event_regs[ctl.event_id].map_reg == pff_ev_reg)
+ nr_idxs = stdev->pff_csr_count;
+ else
+ return -EINVAL;
+
+ for (ctl.index = 0; ctl.index < nr_idxs; ctl.index++) {
+ ret = event_ctl(stdev, &ctl);
+ if (ret < 0)
+ return ret;
+ }
+ } else {
+ ret = event_ctl(stdev, &ctl);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (copy_to_user(uctl, &ctl, sizeof(ctl)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int ioctl_pff_to_port(struct switchtec_dev *stdev,
+ struct switchtec_ioctl_pff_port *up)
+{
+ int i, part;
+ u32 reg;
+ struct part_cfg_regs *pcfg;
+ struct switchtec_ioctl_pff_port p;
+
+ if (copy_from_user(&p, up, sizeof(p)))
+ return -EFAULT;
+
+ p.port = -1;
+ for (part = 0; part < stdev->partition_count; part++) {
+ pcfg = &stdev->mmio_part_cfg_all[part];
+ p.partition = part;
+
+ reg = ioread32(&pcfg->usp_pff_inst_id);
+ if (reg == p.pff) {
+ p.port = 0;
+ break;
+ }
+
+ reg = ioread32(&pcfg->vep_pff_inst_id);
+ if (reg == p.pff) {
+ p.port = SWITCHTEC_IOCTL_PFF_VEP;
+ break;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
+ reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
+ if (reg != p.pff)
+ continue;
+
+ p.port = i + 1;
+ break;
+ }
+
+ if (p.port != -1)
+ break;
+ }
+
+ if (copy_to_user(up, &p, sizeof(p)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int ioctl_port_to_pff(struct switchtec_dev *stdev,
+ struct switchtec_ioctl_pff_port *up)
+{
+ struct switchtec_ioctl_pff_port p;
+ struct part_cfg_regs *pcfg;
+
+ if (copy_from_user(&p, up, sizeof(p)))
+ return -EFAULT;
+
+ if (p.partition == SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX)
+ pcfg = stdev->mmio_part_cfg;
+ else if (p.partition < stdev->partition_count)
+ pcfg = &stdev->mmio_part_cfg_all[p.partition];
+ else
+ return -EINVAL;
+
+ switch (p.port) {
+ case 0:
+ p.pff = ioread32(&pcfg->usp_pff_inst_id);
+ break;
+ case SWITCHTEC_IOCTL_PFF_VEP:
+ p.pff = ioread32(&pcfg->vep_pff_inst_id);
+ break;
+ default:
+ if (p.port > ARRAY_SIZE(pcfg->dsp_pff_inst_id))
+ return -EINVAL;
+ p.pff = ioread32(&pcfg->dsp_pff_inst_id[p.port - 1]);
+ break;
+ }
+
+ if (copy_to_user(up, &p, sizeof(p)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static long switchtec_dev_ioctl(struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ struct switchtec_user *stuser = filp->private_data;
+ struct switchtec_dev *stdev = stuser->stdev;
+ int rc;
+ void __user *argp = (void __user *)arg;
+
+ rc = lock_mutex_and_test_alive(stdev);
+ if (rc)
+ return rc;
+
+ switch (cmd) {
+ case SWITCHTEC_IOCTL_FLASH_INFO:
+ rc = ioctl_flash_info(stdev, argp);
+ break;
+ case SWITCHTEC_IOCTL_FLASH_PART_INFO:
+ rc = ioctl_flash_part_info(stdev, argp);
+ break;
+ case SWITCHTEC_IOCTL_EVENT_SUMMARY:
+ rc = ioctl_event_summary(stdev, stuser, argp);
+ break;
+ case SWITCHTEC_IOCTL_EVENT_CTL:
+ rc = ioctl_event_ctl(stdev, argp);
+ break;
+ case SWITCHTEC_IOCTL_PFF_TO_PORT:
+ rc = ioctl_pff_to_port(stdev, argp);
+ break;
+ case SWITCHTEC_IOCTL_PORT_TO_PFF:
+ rc = ioctl_port_to_pff(stdev, argp);
+ break;
+ default:
+ rc = -ENOTTY;
+ break;
+ }
+
+ mutex_unlock(&stdev->mrpc_mutex);
+ return rc;
+}
+
+static const struct file_operations switchtec_fops = {
+ .owner = THIS_MODULE,
+ .open = switchtec_dev_open,
+ .release = switchtec_dev_release,
+ .write = switchtec_dev_write,
+ .read = switchtec_dev_read,
+ .poll = switchtec_dev_poll,
+ .unlocked_ioctl = switchtec_dev_ioctl,
+ .compat_ioctl = switchtec_dev_ioctl,
+};
+
+static void stdev_release(struct device *dev)
+{
+ struct switchtec_dev *stdev = to_stdev(dev);
+
+ kfree(stdev);
+}
+
+static void stdev_kill(struct switchtec_dev *stdev)
+{
+ struct switchtec_user *stuser, *tmpuser;
+
+ pci_clear_master(stdev->pdev);
+
+ cancel_delayed_work_sync(&stdev->mrpc_timeout);
+
+ /* Mark the hardware as unavailable and complete all completions */
+ mutex_lock(&stdev->mrpc_mutex);
+ stdev->alive = false;
+
+ /* Wake up and kill any users waiting on an MRPC request */
+ list_for_each_entry_safe(stuser, tmpuser, &stdev->mrpc_queue, list) {
+ complete_all(&stuser->comp);
+ list_del_init(&stuser->list);
+ stuser_put(stuser);
+ }
+
+ mutex_unlock(&stdev->mrpc_mutex);
+
+ /* Wake up any users waiting on event_wq */
+ wake_up_interruptible(&stdev->event_wq);
+}
+
+static struct switchtec_dev *stdev_create(struct pci_dev *pdev)
+{
+ struct switchtec_dev *stdev;
+ int minor;
+ struct device *dev;
+ struct cdev *cdev;
+ int rc;
+
+ stdev = kzalloc_node(sizeof(*stdev), GFP_KERNEL,
+ dev_to_node(&pdev->dev));
+ if (!stdev)
+ return ERR_PTR(-ENOMEM);
+
+ stdev->alive = true;
+ stdev->pdev = pdev;
+ INIT_LIST_HEAD(&stdev->mrpc_queue);
+ mutex_init(&stdev->mrpc_mutex);
+ stdev->mrpc_busy = 0;
+ INIT_WORK(&stdev->mrpc_work, mrpc_event_work);
+ INIT_DELAYED_WORK(&stdev->mrpc_timeout, mrpc_timeout_work);
+ init_waitqueue_head(&stdev->event_wq);
+ atomic_set(&stdev->event_cnt, 0);
+
+ dev = &stdev->dev;
+ device_initialize(dev);
+ dev->class = switchtec_class;
+ dev->parent = &pdev->dev;
+ dev->groups = switchtec_device_groups;
+ dev->release = stdev_release;
+
+ minor = ida_simple_get(&switchtec_minor_ida, 0, 0,
+ GFP_KERNEL);
+ if (minor < 0) {
+ rc = minor;
+ goto err_put;
+ }
+
+ dev->devt = MKDEV(MAJOR(switchtec_devt), minor);
+ dev_set_name(dev, "switchtec%d", minor);
+
+ cdev = &stdev->cdev;
+ cdev_init(cdev, &switchtec_fops);
+ cdev->owner = THIS_MODULE;
+ cdev->kobj.parent = &dev->kobj;
+
+ return stdev;
+
+err_put:
+ put_device(&stdev->dev);
+ return ERR_PTR(rc);
+}
+
+static int mask_event(struct switchtec_dev *stdev, int eid, int idx)
+{
+ size_t off = event_regs[eid].offset;
+ u32 __iomem *hdr_reg;
+ u32 hdr;
+
+ hdr_reg = event_regs[eid].map_reg(stdev, off, idx);
+ hdr = ioread32(hdr_reg);
+
+ if (!(hdr & SWITCHTEC_EVENT_OCCURRED && hdr & SWITCHTEC_EVENT_EN_IRQ))
+ return 0;
+
+ dev_dbg(&stdev->dev, "%s: %d %d %x\n", __func__, eid, idx, hdr);
+ hdr &= ~(SWITCHTEC_EVENT_EN_IRQ | SWITCHTEC_EVENT_OCCURRED);
+ iowrite32(hdr, hdr_reg);
+
+ return 1;
+}
+
+static int mask_all_events(struct switchtec_dev *stdev, int eid)
+{
+ int idx;
+ int count = 0;
+
+ if (event_regs[eid].map_reg == part_ev_reg) {
+ for (idx = 0; idx < stdev->partition_count; idx++)
+ count += mask_event(stdev, eid, idx);
+ } else if (event_regs[eid].map_reg == pff_ev_reg) {
+ for (idx = 0; idx < stdev->pff_csr_count; idx++) {
+ if (!stdev->pff_local[idx])
+ continue;
+ count += mask_event(stdev, eid, idx);
+ }
+ } else {
+ count += mask_event(stdev, eid, 0);
+ }
+
+ return count;
+}
+
+static irqreturn_t switchtec_event_isr(int irq, void *dev)
+{
+ struct switchtec_dev *stdev = dev;
+ u32 reg;
+ irqreturn_t ret = IRQ_NONE;
+ int eid, event_count = 0;
+
+ reg = ioread32(&stdev->mmio_part_cfg->mrpc_comp_hdr);
+ if (reg & SWITCHTEC_EVENT_OCCURRED) {
+ dev_dbg(&stdev->dev, "%s: mrpc comp\n", __func__);
+ ret = IRQ_HANDLED;
+ schedule_work(&stdev->mrpc_work);
+ iowrite32(reg, &stdev->mmio_part_cfg->mrpc_comp_hdr);
+ }
+
+ for (eid = 0; eid < SWITCHTEC_IOCTL_MAX_EVENTS; eid++)
+ event_count += mask_all_events(stdev, eid);
+
+ if (event_count) {
+ atomic_inc(&stdev->event_cnt);
+ wake_up_interruptible(&stdev->event_wq);
+ dev_dbg(&stdev->dev, "%s: %d events\n", __func__,
+ event_count);
+ return IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+static int switchtec_init_isr(struct switchtec_dev *stdev)
+{
+ int nvecs;
+ int event_irq;
+
+ nvecs = pci_alloc_irq_vectors(stdev->pdev, 1, 4,
+ PCI_IRQ_MSIX | PCI_IRQ_MSI);
+ if (nvecs < 0)
+ return nvecs;
+
+ event_irq = ioread32(&stdev->mmio_part_cfg->vep_vector_number);
+ if (event_irq < 0 || event_irq >= nvecs)
+ return -EFAULT;
+
+ event_irq = pci_irq_vector(stdev->pdev, event_irq);
+ if (event_irq < 0)
+ return event_irq;
+
+ return devm_request_irq(&stdev->pdev->dev, event_irq,
+ switchtec_event_isr, 0,
+ KBUILD_MODNAME, stdev);
+}
+
+static void init_pff(struct switchtec_dev *stdev)
+{
+ int i;
+ u32 reg;
+ struct part_cfg_regs *pcfg = stdev->mmio_part_cfg;
+
+ for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
+ reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
+ if (reg != MICROSEMI_VENDOR_ID)
+ break;
+ }
+
+ stdev->pff_csr_count = i;
+
+ reg = ioread32(&pcfg->usp_pff_inst_id);
+ if (reg < SWITCHTEC_MAX_PFF_CSR)
+ stdev->pff_local[reg] = 1;
+
+ reg = ioread32(&pcfg->vep_pff_inst_id);
+ if (reg < SWITCHTEC_MAX_PFF_CSR)
+ stdev->pff_local[reg] = 1;
+
+ for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
+ reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
+ if (reg < SWITCHTEC_MAX_PFF_CSR)
+ stdev->pff_local[reg] = 1;
+ }
+}
+
+static int switchtec_init_pci(struct switchtec_dev *stdev,
+ struct pci_dev *pdev)
+{
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pcim_iomap_regions(pdev, 0x1, KBUILD_MODNAME);
+ if (rc)
+ return rc;
+
+ pci_set_master(pdev);
+
+ stdev->mmio = pcim_iomap_table(pdev)[0];
+ stdev->mmio_mrpc = stdev->mmio + SWITCHTEC_GAS_MRPC_OFFSET;
+ stdev->mmio_sw_event = stdev->mmio + SWITCHTEC_GAS_SW_EVENT_OFFSET;
+ stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
+ stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
+ stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET;
+ stdev->partition = ioread8(&stdev->mmio_ntb->partition_id);
+ stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count);
+ stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET;
+ stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[stdev->partition];
+ stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET;
+
+ init_pff(stdev);
+
+ pci_set_drvdata(pdev, stdev);
+
+ return 0;
+}
+
+static int switchtec_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct switchtec_dev *stdev;
+ int rc;
+
+ stdev = stdev_create(pdev);
+ if (IS_ERR(stdev))
+ return PTR_ERR(stdev);
+
+ rc = switchtec_init_pci(stdev, pdev);
+ if (rc)
+ goto err_put;
+
+ rc = switchtec_init_isr(stdev);
+ if (rc) {
+ dev_err(&stdev->dev, "failed to init isr.\n");
+ goto err_put;
+ }
+
+ iowrite32(SWITCHTEC_EVENT_CLEAR |
+ SWITCHTEC_EVENT_EN_IRQ,
+ &stdev->mmio_part_cfg->mrpc_comp_hdr);
+
+ rc = cdev_add(&stdev->cdev, stdev->dev.devt, 1);
+ if (rc)
+ goto err_put;
+
+ rc = device_add(&stdev->dev);
+ if (rc)
+ goto err_devadd;
+
+ dev_info(&stdev->dev, "Management device registered.\n");
+
+ return 0;
+
+err_devadd:
+ cdev_del(&stdev->cdev);
+ stdev_kill(stdev);
+err_put:
+ ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
+ put_device(&stdev->dev);
+ return rc;
+}
+
+static void switchtec_pci_remove(struct pci_dev *pdev)
+{
+ struct switchtec_dev *stdev = pci_get_drvdata(pdev);
+
+ pci_set_drvdata(pdev, NULL);
+
+ device_del(&stdev->dev);
+ cdev_del(&stdev->cdev);
+ ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
+ dev_info(&stdev->dev, "unregistered.\n");
+
+ stdev_kill(stdev);
+ put_device(&stdev->dev);
+}
+
+#define SWITCHTEC_PCI_DEVICE(device_id) \
+ { \
+ .vendor = MICROSEMI_VENDOR_ID, \
+ .device = device_id, \
+ .subvendor = PCI_ANY_ID, \
+ .subdevice = PCI_ANY_ID, \
+ .class = MICROSEMI_MGMT_CLASSCODE, \
+ .class_mask = 0xFFFFFFFF, \
+ }, \
+ { \
+ .vendor = MICROSEMI_VENDOR_ID, \
+ .device = device_id, \
+ .subvendor = PCI_ANY_ID, \
+ .subdevice = PCI_ANY_ID, \
+ .class = MICROSEMI_NTB_CLASSCODE, \
+ .class_mask = 0xFFFFFFFF, \
+ }
+
+static const struct pci_device_id switchtec_pci_tbl[] = {
+ SWITCHTEC_PCI_DEVICE(0x8531), //PFX 24xG3
+ SWITCHTEC_PCI_DEVICE(0x8532), //PFX 32xG3
+ SWITCHTEC_PCI_DEVICE(0x8533), //PFX 48xG3
+ SWITCHTEC_PCI_DEVICE(0x8534), //PFX 64xG3
+ SWITCHTEC_PCI_DEVICE(0x8535), //PFX 80xG3
+ SWITCHTEC_PCI_DEVICE(0x8536), //PFX 96xG3
+ SWITCHTEC_PCI_DEVICE(0x8543), //PSX 48xG3
+ SWITCHTEC_PCI_DEVICE(0x8544), //PSX 64xG3
+ SWITCHTEC_PCI_DEVICE(0x8545), //PSX 80xG3
+ SWITCHTEC_PCI_DEVICE(0x8546), //PSX 96xG3
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, switchtec_pci_tbl);
+
+static struct pci_driver switchtec_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = switchtec_pci_tbl,
+ .probe = switchtec_pci_probe,
+ .remove = switchtec_pci_remove,
+};
+
+static int __init switchtec_init(void)
+{
+ int rc;
+
+ rc = alloc_chrdev_region(&switchtec_devt, 0, max_devices,
+ "switchtec");
+ if (rc)
+ return rc;
+
+ switchtec_class = class_create(THIS_MODULE, "switchtec");
+ if (IS_ERR(switchtec_class)) {
+ rc = PTR_ERR(switchtec_class);
+ goto err_create_class;
+ }
+
+ rc = pci_register_driver(&switchtec_pci_driver);
+ if (rc)
+ goto err_pci_register;
+
+ pr_info(KBUILD_MODNAME ": loaded.\n");
+
+ return 0;
+
+err_pci_register:
+ class_destroy(switchtec_class);
+
+err_create_class:
+ unregister_chrdev_region(switchtec_devt, max_devices);
+
+ return rc;
+}
+module_init(switchtec_init);
+
+static void __exit switchtec_exit(void)
+{
+ pci_unregister_driver(&switchtec_pci_driver);
+ class_destroy(switchtec_class);
+ unregister_chrdev_region(switchtec_devt, max_devices);
+ ida_destroy(&switchtec_minor_ida);
+
+ pr_info(KBUILD_MODNAME ": unloaded.\n");
+}
+module_exit(switchtec_exit);
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 42e37c20..313c107 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -293,6 +293,15 @@
To compile this driver as a module, choose M here: the module
will be called pwm-mtk-disp.
+config PWM_MEDIATEK
+ tristate "MediaTek PWM support"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ help
+ Generic PWM framework driver for Mediatek ARM SoC.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-mxs.
+
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 346a83b..93da1f7 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -26,6 +26,7 @@
obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
obj-$(CONFIG_PWM_MESON) += pwm-meson.o
+obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
index 99918727..54c6633 100644
--- a/drivers/pwm/pwm-atmel-hlcdc.c
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -49,162 +49,137 @@ static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip)
return container_of(chip, struct atmel_hlcdc_pwm, chip);
}
-static int atmel_hlcdc_pwm_config(struct pwm_chip *c,
- struct pwm_device *pwm,
- int duty_ns, int period_ns)
+static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
+ struct pwm_state *state)
{
struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
struct atmel_hlcdc *hlcdc = chip->hlcdc;
- struct clk *new_clk = hlcdc->slow_clk;
- u64 pwmcval = duty_ns * 256;
- unsigned long clk_freq;
- u64 clk_period_ns;
- u32 pwmcfg;
- int pres;
+ unsigned int status;
+ int ret;
- if (!chip->errata || !chip->errata->slow_clk_erratum) {
- clk_freq = clk_get_rate(new_clk);
- if (!clk_freq)
- return -EINVAL;
+ if (state->enabled) {
+ struct clk *new_clk = hlcdc->slow_clk;
+ u64 pwmcval = state->duty_cycle * 256;
+ unsigned long clk_freq;
+ u64 clk_period_ns;
+ u32 pwmcfg;
+ int pres;
- clk_period_ns = (u64)NSEC_PER_SEC * 256;
- do_div(clk_period_ns, clk_freq);
- }
+ if (!chip->errata || !chip->errata->slow_clk_erratum) {
+ clk_freq = clk_get_rate(new_clk);
+ if (!clk_freq)
+ return -EINVAL;
- /* Errata: cannot use slow clk on some IP revisions */
- if ((chip->errata && chip->errata->slow_clk_erratum) ||
- clk_period_ns > period_ns) {
- new_clk = hlcdc->sys_clk;
- clk_freq = clk_get_rate(new_clk);
- if (!clk_freq)
- return -EINVAL;
+ clk_period_ns = (u64)NSEC_PER_SEC * 256;
+ do_div(clk_period_ns, clk_freq);
+ }
- clk_period_ns = (u64)NSEC_PER_SEC * 256;
- do_div(clk_period_ns, clk_freq);
- }
+ /* Errata: cannot use slow clk on some IP revisions */
+ if ((chip->errata && chip->errata->slow_clk_erratum) ||
+ clk_period_ns > state->period) {
+ new_clk = hlcdc->sys_clk;
+ clk_freq = clk_get_rate(new_clk);
+ if (!clk_freq)
+ return -EINVAL;
- for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
+ clk_period_ns = (u64)NSEC_PER_SEC * 256;
+ do_div(clk_period_ns, clk_freq);
+ }
+
+ for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
/* Errata: cannot divide by 1 on some IP revisions */
- if (!pres && chip->errata && chip->errata->div1_clk_erratum)
- continue;
+ if (!pres && chip->errata &&
+ chip->errata->div1_clk_erratum)
+ continue;
- if ((clk_period_ns << pres) >= period_ns)
- break;
- }
+ if ((clk_period_ns << pres) >= state->period)
+ break;
+ }
- if (pres > ATMEL_HLCDC_PWMPS_MAX)
- return -EINVAL;
+ if (pres > ATMEL_HLCDC_PWMPS_MAX)
+ return -EINVAL;
- pwmcfg = ATMEL_HLCDC_PWMPS(pres);
+ pwmcfg = ATMEL_HLCDC_PWMPS(pres);
- if (new_clk != chip->cur_clk) {
- u32 gencfg = 0;
- int ret;
+ if (new_clk != chip->cur_clk) {
+ u32 gencfg = 0;
+ int ret;
- ret = clk_prepare_enable(new_clk);
+ ret = clk_prepare_enable(new_clk);
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(chip->cur_clk);
+ chip->cur_clk = new_clk;
+
+ if (new_clk == hlcdc->sys_clk)
+ gencfg = ATMEL_HLCDC_CLKPWMSEL;
+
+ ret = regmap_update_bits(hlcdc->regmap,
+ ATMEL_HLCDC_CFG(0),
+ ATMEL_HLCDC_CLKPWMSEL,
+ gencfg);
+ if (ret)
+ return ret;
+ }
+
+ do_div(pwmcval, state->period);
+
+ /*
+ * The PWM duty cycle is configurable from 0/256 to 255/256 of
+ * the period cycle. Hence we can't set a duty cycle occupying
+ * the whole period cycle if we're asked to.
+ * Set it to 255 if pwmcval is greater than 256.
+ */
+ if (pwmcval > 255)
+ pwmcval = 255;
+
+ pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
+
+ if (state->polarity == PWM_POLARITY_NORMAL)
+ pwmcfg |= ATMEL_HLCDC_PWMPOL;
+
+ ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
+ ATMEL_HLCDC_PWMCVAL_MASK |
+ ATMEL_HLCDC_PWMPS_MASK |
+ ATMEL_HLCDC_PWMPOL,
+ pwmcfg);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN,
+ ATMEL_HLCDC_PWM);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
+ status,
+ status & ATMEL_HLCDC_PWM,
+ 10, 0);
+ if (ret)
+ return ret;
+ } else {
+ ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS,
+ ATMEL_HLCDC_PWM);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
+ status,
+ !(status & ATMEL_HLCDC_PWM),
+ 10, 0);
if (ret)
return ret;
clk_disable_unprepare(chip->cur_clk);
- chip->cur_clk = new_clk;
-
- if (new_clk == hlcdc->sys_clk)
- gencfg = ATMEL_HLCDC_CLKPWMSEL;
-
- ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(0),
- ATMEL_HLCDC_CLKPWMSEL, gencfg);
- if (ret)
- return ret;
- }
-
- do_div(pwmcval, period_ns);
-
- /*
- * The PWM duty cycle is configurable from 0/256 to 255/256 of the
- * period cycle. Hence we can't set a duty cycle occupying the
- * whole period cycle if we're asked to.
- * Set it to 255 if pwmcval is greater than 256.
- */
- if (pwmcval > 255)
- pwmcval = 255;
-
- pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
-
- return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
- ATMEL_HLCDC_PWMCVAL_MASK |
- ATMEL_HLCDC_PWMPS_MASK,
- pwmcfg);
-}
-
-static int atmel_hlcdc_pwm_set_polarity(struct pwm_chip *c,
- struct pwm_device *pwm,
- enum pwm_polarity polarity)
-{
- struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
- struct atmel_hlcdc *hlcdc = chip->hlcdc;
- u32 cfg = 0;
-
- if (polarity == PWM_POLARITY_NORMAL)
- cfg = ATMEL_HLCDC_PWMPOL;
-
- return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
- ATMEL_HLCDC_PWMPOL, cfg);
-}
-
-static int atmel_hlcdc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
-{
- struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
- struct atmel_hlcdc *hlcdc = chip->hlcdc;
- u32 status;
- int ret;
-
- ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_PWM);
- if (ret)
- return ret;
-
- while (true) {
- ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status);
- if (ret)
- return ret;
-
- if ((status & ATMEL_HLCDC_PWM) != 0)
- break;
-
- usleep_range(1, 10);
+ chip->cur_clk = NULL;
}
return 0;
}
-static void atmel_hlcdc_pwm_disable(struct pwm_chip *c,
- struct pwm_device *pwm)
-{
- struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
- struct atmel_hlcdc *hlcdc = chip->hlcdc;
- u32 status;
- int ret;
-
- ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_PWM);
- if (ret)
- return;
-
- while (true) {
- ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status);
- if (ret)
- return;
-
- if ((status & ATMEL_HLCDC_PWM) == 0)
- break;
-
- usleep_range(1, 10);
- }
-}
-
static const struct pwm_ops atmel_hlcdc_pwm_ops = {
- .config = atmel_hlcdc_pwm_config,
- .set_polarity = atmel_hlcdc_pwm_set_polarity,
- .enable = atmel_hlcdc_pwm_enable,
- .disable = atmel_hlcdc_pwm_disable,
+ .apply = atmel_hlcdc_pwm_apply,
.owner = THIS_MODULE,
};
@@ -216,6 +191,40 @@ static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
.div1_clk_erratum = true,
};
+#ifdef CONFIG_PM_SLEEP
+static int atmel_hlcdc_pwm_suspend(struct device *dev)
+{
+ struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
+
+ /* Keep the periph clock enabled if the PWM is still running. */
+ if (pwm_is_enabled(&chip->chip.pwms[0]))
+ clk_disable_unprepare(chip->hlcdc->periph_clk);
+
+ return 0;
+}
+
+static int atmel_hlcdc_pwm_resume(struct device *dev)
+{
+ struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
+ struct pwm_state state;
+ int ret;
+
+ pwm_get_state(&chip->chip.pwms[0], &state);
+
+ /* Re-enable the periph clock it was stopped during suspend. */
+ if (!state.enabled) {
+ ret = clk_prepare_enable(chip->hlcdc->periph_clk);
+ if (ret)
+ return ret;
+ }
+
+ return atmel_hlcdc_pwm_apply(&chip->chip, &chip->chip.pwms[0], &state);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
+ atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
+
static const struct of_device_id atmel_hlcdc_dt_ids[] = {
{
.compatible = "atmel,at91sam9n12-hlcdc",
@@ -305,6 +314,7 @@ static struct platform_driver atmel_hlcdc_pwm_driver = {
.driver = {
.name = "atmel-hlcdc-pwm",
.of_match_table = atmel_hlcdc_pwm_dt_ids,
+ .pm = &atmel_hlcdc_pwm_pm_ops,
},
.probe = atmel_hlcdc_pwm_probe,
.remove = atmel_hlcdc_pwm_remove,
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index 67a7023..530d7dc 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -58,17 +58,22 @@
#define PWM_MAX_PRD 0xFFFF
#define PRD_MAX_PRES 10
+struct atmel_pwm_registers {
+ u8 period;
+ u8 period_upd;
+ u8 duty;
+ u8 duty_upd;
+};
+
struct atmel_pwm_chip {
struct pwm_chip chip;
struct clk *clk;
void __iomem *base;
+ const struct atmel_pwm_registers *regs;
unsigned int updated_pwms;
/* ISR is cleared when read, ensure only one thread does that */
struct mutex isr_lock;
-
- void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
- unsigned long dty, unsigned long prd);
};
static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
@@ -105,153 +110,71 @@ static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
writel_relaxed(val, chip->base + base + offset);
}
-static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
+static int atmel_pwm_calculate_cprd_and_pres(struct pwm_chip *chip,
+ const struct pwm_state *state,
+ unsigned long *cprd, u32 *pres)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
- unsigned long prd, dty;
- unsigned long long div;
- unsigned int pres = 0;
- u32 val;
- int ret;
-
- if (pwm_is_enabled(pwm) && (period_ns != pwm_get_period(pwm))) {
- dev_err(chip->dev, "cannot change PWM period while enabled\n");
- return -EBUSY;
- }
+ unsigned long long cycles = state->period;
/* Calculate the period cycles and prescale value */
- div = (unsigned long long)clk_get_rate(atmel_pwm->clk) * period_ns;
- do_div(div, NSEC_PER_SEC);
+ cycles *= clk_get_rate(atmel_pwm->clk);
+ do_div(cycles, NSEC_PER_SEC);
- while (div > PWM_MAX_PRD) {
- div >>= 1;
- pres++;
- }
+ for (*pres = 0; cycles > PWM_MAX_PRD; cycles >>= 1)
+ (*pres)++;
- if (pres > PRD_MAX_PRES) {
+ if (*pres > PRD_MAX_PRES) {
dev_err(chip->dev, "pres exceeds the maximum value\n");
return -EINVAL;
}
- /* Calculate the duty cycles */
- prd = div;
- div *= duty_ns;
- do_div(div, period_ns);
- dty = prd - div;
+ *cprd = cycles;
- ret = clk_enable(atmel_pwm->clk);
- if (ret) {
- dev_err(chip->dev, "failed to enable PWM clock\n");
- return ret;
- }
-
- /* It is necessary to preserve CPOL, inside CMR */
- val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
- val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
- atmel_pwm->config(chip, pwm, dty, prd);
- mutex_lock(&atmel_pwm->isr_lock);
- atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
- atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
- mutex_unlock(&atmel_pwm->isr_lock);
-
- clk_disable(atmel_pwm->clk);
- return ret;
+ return 0;
}
-static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm,
- unsigned long dty, unsigned long prd)
+static void atmel_pwm_calculate_cdty(const struct pwm_state *state,
+ unsigned long cprd, unsigned long *cdty)
{
- struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
- unsigned int val;
+ unsigned long long cycles = state->duty_cycle;
-
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty);
-
- val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
- val &= ~PWM_CMR_UPD_CDTY;
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
-
- /*
- * If the PWM channel is enabled, only update CDTY by using the update
- * register, it needs to set bit 10 of CMR to 0
- */
- if (pwm_is_enabled(pwm))
- return;
- /*
- * If the PWM channel is disabled, write value to duty and period
- * registers directly.
- */
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty);
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd);
+ cycles *= cprd;
+ do_div(cycles, state->period);
+ *cdty = cprd - cycles;
}
-static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm,
- unsigned long dty, unsigned long prd)
-{
- struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
-
- if (pwm_is_enabled(pwm)) {
- /*
- * If the PWM channel is enabled, using the duty update register
- * to update the value.
- */
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty);
- } else {
- /*
- * If the PWM channel is disabled, write value to duty and
- * period registers directly.
- */
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty);
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd);
- }
-}
-
-static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
- enum pwm_polarity polarity)
+static void atmel_pwm_update_cdty(struct pwm_chip *chip, struct pwm_device *pwm,
+ unsigned long cdty)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
u32 val;
- int ret;
- val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
-
- if (polarity == PWM_POLARITY_NORMAL)
- val &= ~PWM_CMR_CPOL;
- else
- val |= PWM_CMR_CPOL;
-
- ret = clk_enable(atmel_pwm->clk);
- if (ret) {
- dev_err(chip->dev, "failed to enable PWM clock\n");
- return ret;
+ if (atmel_pwm->regs->duty_upd ==
+ atmel_pwm->regs->period_upd) {
+ val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+ val &= ~PWM_CMR_UPD_CDTY;
+ atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
}
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
-
- clk_disable(atmel_pwm->clk);
-
- return 0;
+ atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
+ atmel_pwm->regs->duty_upd, cdty);
}
-static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+static void atmel_pwm_set_cprd_cdty(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ unsigned long cprd, unsigned long cdty)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
- int ret;
- ret = clk_enable(atmel_pwm->clk);
- if (ret) {
- dev_err(chip->dev, "failed to enable PWM clock\n");
- return ret;
- }
-
- atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
-
- return 0;
+ atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
+ atmel_pwm->regs->duty, cdty);
+ atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
+ atmel_pwm->regs->period, cprd);
}
-static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
+ bool disable_clk)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
unsigned long timeout = jiffies + 2 * HZ;
@@ -282,37 +205,99 @@ static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
time_before(jiffies, timeout))
usleep_range(10, 100);
- clk_disable(atmel_pwm->clk);
+ if (disable_clk)
+ clk_disable(atmel_pwm->clk);
+}
+
+static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+ struct pwm_state cstate;
+ unsigned long cprd, cdty;
+ u32 pres, val;
+ int ret;
+
+ pwm_get_state(pwm, &cstate);
+
+ if (state->enabled) {
+ if (cstate.enabled &&
+ cstate.polarity == state->polarity &&
+ cstate.period == state->period) {
+ cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
+ atmel_pwm->regs->period);
+ atmel_pwm_calculate_cdty(state, cprd, &cdty);
+ atmel_pwm_update_cdty(chip, pwm, cdty);
+ return 0;
+ }
+
+ ret = atmel_pwm_calculate_cprd_and_pres(chip, state, &cprd,
+ &pres);
+ if (ret) {
+ dev_err(chip->dev,
+ "failed to calculate cprd and prescaler\n");
+ return ret;
+ }
+
+ atmel_pwm_calculate_cdty(state, cprd, &cdty);
+
+ if (cstate.enabled) {
+ atmel_pwm_disable(chip, pwm, false);
+ } else {
+ ret = clk_enable(atmel_pwm->clk);
+ if (ret) {
+ dev_err(chip->dev, "failed to enable clock\n");
+ return ret;
+ }
+ }
+
+ /* It is necessary to preserve CPOL, inside CMR */
+ val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+ val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
+ if (state->polarity == PWM_POLARITY_NORMAL)
+ val &= ~PWM_CMR_CPOL;
+ else
+ val |= PWM_CMR_CPOL;
+ atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
+ atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty);
+ mutex_lock(&atmel_pwm->isr_lock);
+ atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
+ atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
+ mutex_unlock(&atmel_pwm->isr_lock);
+ atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
+ } else if (cstate.enabled) {
+ atmel_pwm_disable(chip, pwm, true);
+ }
+
+ return 0;
}
static const struct pwm_ops atmel_pwm_ops = {
- .config = atmel_pwm_config,
- .set_polarity = atmel_pwm_set_polarity,
- .enable = atmel_pwm_enable,
- .disable = atmel_pwm_disable,
+ .apply = atmel_pwm_apply,
.owner = THIS_MODULE,
};
-struct atmel_pwm_data {
- void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
- unsigned long dty, unsigned long prd);
+static const struct atmel_pwm_registers atmel_pwm_regs_v1 = {
+ .period = PWMV1_CPRD,
+ .period_upd = PWMV1_CUPD,
+ .duty = PWMV1_CDTY,
+ .duty_upd = PWMV1_CUPD,
};
-static const struct atmel_pwm_data atmel_pwm_data_v1 = {
- .config = atmel_pwm_config_v1,
-};
-
-static const struct atmel_pwm_data atmel_pwm_data_v2 = {
- .config = atmel_pwm_config_v2,
+static const struct atmel_pwm_registers atmel_pwm_regs_v2 = {
+ .period = PWMV2_CPRD,
+ .period_upd = PWMV2_CPRDUPD,
+ .duty = PWMV2_CDTY,
+ .duty_upd = PWMV2_CDTYUPD,
};
static const struct platform_device_id atmel_pwm_devtypes[] = {
{
.name = "at91sam9rl-pwm",
- .driver_data = (kernel_ulong_t)&atmel_pwm_data_v1,
+ .driver_data = (kernel_ulong_t)&atmel_pwm_regs_v1,
}, {
.name = "sama5d3-pwm",
- .driver_data = (kernel_ulong_t)&atmel_pwm_data_v2,
+ .driver_data = (kernel_ulong_t)&atmel_pwm_regs_v2,
}, {
/* sentinel */
},
@@ -322,17 +307,20 @@ MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes);
static const struct of_device_id atmel_pwm_dt_ids[] = {
{
.compatible = "atmel,at91sam9rl-pwm",
- .data = &atmel_pwm_data_v1,
+ .data = &atmel_pwm_regs_v1,
}, {
.compatible = "atmel,sama5d3-pwm",
- .data = &atmel_pwm_data_v2,
+ .data = &atmel_pwm_regs_v2,
+ }, {
+ .compatible = "atmel,sama5d2-pwm",
+ .data = &atmel_pwm_regs_v2,
}, {
/* sentinel */
},
};
MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
-static inline const struct atmel_pwm_data *
+static inline const struct atmel_pwm_registers *
atmel_pwm_get_driver_data(struct platform_device *pdev)
{
const struct platform_device_id *id;
@@ -342,18 +330,18 @@ atmel_pwm_get_driver_data(struct platform_device *pdev)
id = platform_get_device_id(pdev);
- return (struct atmel_pwm_data *)id->driver_data;
+ return (struct atmel_pwm_registers *)id->driver_data;
}
static int atmel_pwm_probe(struct platform_device *pdev)
{
- const struct atmel_pwm_data *data;
+ const struct atmel_pwm_registers *regs;
struct atmel_pwm_chip *atmel_pwm;
struct resource *res;
int ret;
- data = atmel_pwm_get_driver_data(pdev);
- if (!data)
+ regs = atmel_pwm_get_driver_data(pdev);
+ if (!regs)
return -ENODEV;
atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
@@ -385,7 +373,7 @@ static int atmel_pwm_probe(struct platform_device *pdev)
atmel_pwm->chip.base = -1;
atmel_pwm->chip.npwm = 4;
- atmel_pwm->config = data->config;
+ atmel_pwm->regs = regs;
atmel_pwm->updated_pwms = 0;
mutex_init(&atmel_pwm->isr_lock);
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
new file mode 100644
index 0000000..5c11bc7
--- /dev/null
+++ b/drivers/pwm/pwm-mediatek.c
@@ -0,0 +1,219 @@
+/*
+ * Mediatek Pulse Width Modulator driver
+ *
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* PWM registers and bits definitions */
+#define PWMCON 0x00
+#define PWMHDUR 0x04
+#define PWMLDUR 0x08
+#define PWMGDUR 0x0c
+#define PWMWAVENUM 0x28
+#define PWMDWIDTH 0x2c
+#define PWMTHRES 0x30
+
+enum {
+ MTK_CLK_MAIN = 0,
+ MTK_CLK_TOP,
+ MTK_CLK_PWM1,
+ MTK_CLK_PWM2,
+ MTK_CLK_PWM3,
+ MTK_CLK_PWM4,
+ MTK_CLK_PWM5,
+ MTK_CLK_MAX,
+};
+
+static const char * const mtk_pwm_clk_name[] = {
+ "main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5"
+};
+
+/**
+ * struct mtk_pwm_chip - struct representing PWM chip
+ * @chip: linux PWM chip representation
+ * @regs: base address of PWM chip
+ * @clks: list of clocks
+ */
+struct mtk_pwm_chip {
+ struct pwm_chip chip;
+ void __iomem *regs;
+ struct clk *clks[MTK_CLK_MAX];
+};
+
+static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct mtk_pwm_chip, chip);
+}
+
+static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
+ unsigned int offset)
+{
+ return readl(chip->regs + 0x10 + (num * 0x40) + offset);
+}
+
+static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
+ unsigned int num, unsigned int offset,
+ u32 value)
+{
+ writel(value, chip->regs + 0x10 + (num * 0x40) + offset);
+}
+
+static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+ struct clk *clk = pc->clks[MTK_CLK_PWM1 + pwm->hwpwm];
+ u32 resolution, clkdiv = 0;
+
+ resolution = NSEC_PER_SEC / clk_get_rate(clk);
+
+ while (period_ns / resolution > 8191) {
+ resolution *= 2;
+ clkdiv++;
+ }
+
+ if (clkdiv > 7)
+ return -EINVAL;
+
+ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
+ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
+ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
+
+ return 0;
+}
+
+static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+ u32 value;
+ int ret;
+
+ ret = clk_prepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+ if (ret < 0)
+ return ret;
+
+ value = readl(pc->regs);
+ value |= BIT(pwm->hwpwm);
+ writel(value, pc->regs);
+
+ return 0;
+}
+
+static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+ u32 value;
+
+ value = readl(pc->regs);
+ value &= ~BIT(pwm->hwpwm);
+ writel(value, pc->regs);
+
+ clk_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+}
+
+static const struct pwm_ops mtk_pwm_ops = {
+ .config = mtk_pwm_config,
+ .enable = mtk_pwm_enable,
+ .disable = mtk_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int mtk_pwm_probe(struct platform_device *pdev)
+{
+ struct mtk_pwm_chip *pc;
+ struct resource *res;
+ unsigned int i;
+ int ret;
+
+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pc->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pc->regs))
+ return PTR_ERR(pc->regs);
+
+ for (i = 0; i < MTK_CLK_MAX; i++) {
+ pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
+ if (IS_ERR(pc->clks[i]))
+ return PTR_ERR(pc->clks[i]);
+ }
+
+ ret = clk_prepare(pc->clks[MTK_CLK_TOP]);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_prepare(pc->clks[MTK_CLK_MAIN]);
+ if (ret < 0)
+ goto disable_clk_top;
+
+ platform_set_drvdata(pdev, pc);
+
+ pc->chip.dev = &pdev->dev;
+ pc->chip.ops = &mtk_pwm_ops;
+ pc->chip.base = -1;
+ pc->chip.npwm = 5;
+
+ ret = pwmchip_add(&pc->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ goto disable_clk_main;
+ }
+
+ return 0;
+
+disable_clk_main:
+ clk_unprepare(pc->clks[MTK_CLK_MAIN]);
+disable_clk_top:
+ clk_unprepare(pc->clks[MTK_CLK_TOP]);
+
+ return ret;
+}
+
+static int mtk_pwm_remove(struct platform_device *pdev)
+{
+ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < pc->chip.npwm; i++)
+ pwm_disable(&pc->chip.pwms[i]);
+
+ return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id mtk_pwm_of_match[] = {
+ { .compatible = "mediatek,mt7623-pwm" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
+
+static struct platform_driver mtk_pwm_driver = {
+ .driver = {
+ .name = "mtk-pwm",
+ .of_match_table = mtk_pwm_of_match,
+ },
+ .probe = mtk_pwm_probe,
+ .remove = mtk_pwm_remove,
+};
+module_platform_driver(mtk_pwm_driver);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_ALIAS("platform:mtk-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 0cfb357..5f55cfa 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -30,6 +30,7 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/pm_runtime.h>
/*
* Because the PCA9685 has only one prescaler per chip, changing the period of
@@ -79,7 +80,6 @@
struct pca9685 {
struct pwm_chip chip;
struct regmap *regmap;
- int active_cnt;
int duty_ns;
int period_ns;
#if IS_ENABLED(CONFIG_GPIOLIB)
@@ -111,20 +111,10 @@ static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset)
pwm_set_chip_data(pwm, (void *)1);
mutex_unlock(&pca->lock);
+ pm_runtime_get_sync(pca->chip.dev);
return 0;
}
-static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
-{
- struct pca9685 *pca = gpiochip_get_data(gpio);
- struct pwm_device *pwm;
-
- mutex_lock(&pca->lock);
- pwm = &pca->chip.pwms[offset];
- pwm_set_chip_data(pwm, NULL);
- mutex_unlock(&pca->lock);
-}
-
static bool pca9685_pwm_is_gpio(struct pca9685 *pca, struct pwm_device *pwm)
{
bool is_gpio = false;
@@ -177,6 +167,19 @@ static void pca9685_pwm_gpio_set(struct gpio_chip *gpio, unsigned int offset,
regmap_write(pca->regmap, LED_N_ON_H(pwm->hwpwm), on);
}
+static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
+{
+ struct pca9685 *pca = gpiochip_get_data(gpio);
+ struct pwm_device *pwm;
+
+ pca9685_pwm_gpio_set(gpio, offset, 0);
+ pm_runtime_put(pca->chip.dev);
+ mutex_lock(&pca->lock);
+ pwm = &pca->chip.pwms[offset];
+ pwm_set_chip_data(pwm, NULL);
+ mutex_unlock(&pca->lock);
+}
+
static int pca9685_pwm_gpio_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
@@ -238,6 +241,16 @@ static inline int pca9685_pwm_gpio_probe(struct pca9685 *pca)
}
#endif
+static void pca9685_set_sleep_mode(struct pca9685 *pca, int sleep)
+{
+ regmap_update_bits(pca->regmap, PCA9685_MODE1,
+ MODE1_SLEEP, sleep ? MODE1_SLEEP : 0);
+ if (!sleep) {
+ /* Wait 500us for the oscillator to be back up */
+ udelay(500);
+ }
+}
+
static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
@@ -252,19 +265,20 @@ static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
if (prescale >= PCA9685_PRESCALE_MIN &&
prescale <= PCA9685_PRESCALE_MAX) {
+ /*
+ * putting the chip briefly into SLEEP mode
+ * at this point won't interfere with the
+ * pm_runtime framework, because the pm_runtime
+ * state is guaranteed active here.
+ */
/* Put chip into sleep mode */
- regmap_update_bits(pca->regmap, PCA9685_MODE1,
- MODE1_SLEEP, MODE1_SLEEP);
+ pca9685_set_sleep_mode(pca, 1);
/* Change the chip-wide output frequency */
regmap_write(pca->regmap, PCA9685_PRESCALE, prescale);
/* Wake the chip up */
- regmap_update_bits(pca->regmap, PCA9685_MODE1,
- MODE1_SLEEP, 0x0);
-
- /* Wait 500us for the oscillator to be back up */
- udelay(500);
+ pca9685_set_sleep_mode(pca, 0);
pca->period_ns = period_ns;
} else {
@@ -406,21 +420,15 @@ static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
if (pca9685_pwm_is_gpio(pca, pwm))
return -EBUSY;
-
- if (pca->active_cnt++ == 0)
- return regmap_update_bits(pca->regmap, PCA9685_MODE1,
- MODE1_SLEEP, 0x0);
+ pm_runtime_get_sync(chip->dev);
return 0;
}
static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
- struct pca9685 *pca = to_pca(chip);
-
- if (--pca->active_cnt == 0)
- regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
- MODE1_SLEEP);
+ pca9685_pwm_disable(chip, pwm);
+ pm_runtime_put(chip->dev);
}
static const struct pwm_ops pca9685_pwm_ops = {
@@ -492,22 +500,54 @@ static int pca9685_pwm_probe(struct i2c_client *client,
return ret;
ret = pca9685_pwm_gpio_probe(pca);
- if (ret < 0)
+ if (ret < 0) {
pwmchip_remove(&pca->chip);
+ return ret;
+ }
- return ret;
+ /* the chip comes out of power-up in the active state */
+ pm_runtime_set_active(&client->dev);
+ /*
+ * enable will put the chip into suspend, which is what we
+ * want as all outputs are disabled at this point
+ */
+ pm_runtime_enable(&client->dev);
+
+ return 0;
}
static int pca9685_pwm_remove(struct i2c_client *client)
{
struct pca9685 *pca = i2c_get_clientdata(client);
+ int ret;
- regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
- MODE1_SLEEP);
-
- return pwmchip_remove(&pca->chip);
+ ret = pwmchip_remove(&pca->chip);
+ if (ret)
+ return ret;
+ pm_runtime_disable(&client->dev);
+ return 0;
}
+#ifdef CONFIG_PM
+static int pca9685_pwm_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pca9685 *pca = i2c_get_clientdata(client);
+
+ pca9685_set_sleep_mode(pca, 1);
+ return 0;
+}
+
+static int pca9685_pwm_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pca9685 *pca = i2c_get_clientdata(client);
+
+ pca9685_set_sleep_mode(pca, 0);
+ return 0;
+}
+#endif
+
static const struct i2c_device_id pca9685_id[] = {
{ "pca9685", 0 },
{ /* sentinel */ },
@@ -530,11 +570,17 @@ static const struct of_device_id pca9685_dt_ids[] = {
MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
#endif
+static const struct dev_pm_ops pca9685_pwm_pm = {
+ SET_RUNTIME_PM_OPS(pca9685_pwm_runtime_suspend,
+ pca9685_pwm_runtime_resume, NULL)
+};
+
static struct i2c_driver pca9685_i2c_driver = {
.driver = {
.name = "pca9685-pwm",
.acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
.of_match_table = of_match_ptr(pca9685_dt_ids),
+ .pm = &pca9685_pwm_pm,
},
.probe = pca9685_pwm_probe,
.remove = pca9685_pwm_remove,
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index e464784..8c6ed55 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -29,6 +29,7 @@
#include <linux/of_device.h>
#include <linux/pwm.h>
#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/slab.h>
#include <linux/reset.h>
@@ -49,6 +50,8 @@ struct tegra_pwm_chip {
struct clk *clk;
struct reset_control*rst;
+ unsigned long clk_rate;
+
void __iomem *regs;
const struct tegra_pwm_soc *soc;
@@ -74,8 +77,8 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
- unsigned long long c = duty_ns;
- unsigned long rate, hz;
+ unsigned long long c = duty_ns, hz;
+ unsigned long rate;
u32 val = 0;
int err;
@@ -85,8 +88,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
* nearest integer during division.
*/
c *= (1 << PWM_DUTY_WIDTH);
- c += period_ns / 2;
- do_div(c, period_ns);
+ c = DIV_ROUND_CLOSEST_ULL(c, period_ns);
val = (u32)c << PWM_DUTY_SHIFT;
@@ -94,10 +96,11 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
* Compute the prescaler value for which (1 << PWM_DUTY_WIDTH)
* cycles at the PWM clock rate will take period_ns nanoseconds.
*/
- rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH;
- hz = NSEC_PER_SEC / period_ns;
+ rate = pc->clk_rate >> PWM_DUTY_WIDTH;
- rate = (rate + (hz / 2)) / hz;
+ /* Consider precision in PWM_SCALE_WIDTH rate calculation */
+ hz = DIV_ROUND_CLOSEST_ULL(100ULL * NSEC_PER_SEC, period_ns);
+ rate = DIV_ROUND_CLOSEST_ULL(100ULL * rate, hz);
/*
* Since the actual PWM divider is the register's frequency divider
@@ -198,6 +201,9 @@ static int tegra_pwm_probe(struct platform_device *pdev)
if (IS_ERR(pwm->clk))
return PTR_ERR(pwm->clk);
+ /* Read PWM clock rate from source */
+ pwm->clk_rate = clk_get_rate(pwm->clk);
+
pwm->rst = devm_reset_control_get(&pdev->dev, "pwm");
if (IS_ERR(pwm->rst)) {
ret = PTR_ERR(pwm->rst);
@@ -253,6 +259,18 @@ static int tegra_pwm_remove(struct platform_device *pdev)
return pwmchip_remove(&pc->chip);
}
+#ifdef CONFIG_PM_SLEEP
+static int tegra_pwm_suspend(struct device *dev)
+{
+ return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int tegra_pwm_resume(struct device *dev)
+{
+ return pinctrl_pm_select_default_state(dev);
+}
+#endif
+
static const struct tegra_pwm_soc tegra20_pwm_soc = {
.num_channels = 4,
};
@@ -269,10 +287,15 @@ static const struct of_device_id tegra_pwm_of_match[] = {
MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);
+static const struct dev_pm_ops tegra_pwm_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(tegra_pwm_suspend, tegra_pwm_resume)
+};
+
static struct platform_driver tegra_pwm_driver = {
.driver = {
.name = "tegra-pwm",
.of_match_table = tegra_pwm_of_match,
+ .pm = &tegra_pwm_pm_ops,
},
.probe = tegra_pwm_probe,
.remove = tegra_pwm_remove,
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f4cdfe9..d21c07cc 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -14,6 +14,13 @@
if RESET_CONTROLLER
+config RESET_A10SR
+ tristate "Altera Arria10 System Resource Reset"
+ depends on MFD_ALTERA_A10SR
+ help
+ This option enables support for the external reset functions for
+ peripheral PHYs on the Altera Arria10 System Resource Chip.
+
config RESET_ATH79
bool "AR71xx Reset Driver" if COMPILE_TEST
default ATH79
@@ -27,6 +34,13 @@
help
This enables the reset controller driver for Marvell Berlin SoCs.
+config RESET_IMX7
+ bool "i.MX7 Reset Driver" if COMPILE_TEST
+ default SOC_IMX7D
+ select MFD_SYSCON
+ help
+ This enables the reset controller driver for i.MX7 SoCs.
+
config RESET_LPC18XX
bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
default ARCH_LPC18XX
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 2cd3f6c..02a74db 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -2,8 +2,10 @@
obj-y += hisilicon/
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
+obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
@@ -15,3 +17,4 @@
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
+
diff --git a/drivers/reset/reset-a10sr.c b/drivers/reset/reset-a10sr.c
new file mode 100644
index 0000000..37496bd
--- /dev/null
+++ b/drivers/reset/reset-a10sr.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright Intel Corporation (C) 2017. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Reset driver for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from reset-socfpga.c
+ */
+
+#include <linux/err.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/reset/altr,rst-mgr-a10sr.h>
+
+struct a10sr_reset {
+ struct reset_controller_dev rcdev;
+ struct regmap *regmap;
+};
+
+static inline struct a10sr_reset *to_a10sr_rst(struct reset_controller_dev *rc)
+{
+ return container_of(rc, struct a10sr_reset, rcdev);
+}
+
+static inline int a10sr_reset_shift(unsigned long id)
+{
+ switch (id) {
+ case A10SR_RESET_ENET_HPS:
+ return 1;
+ case A10SR_RESET_PCIE:
+ case A10SR_RESET_FILE:
+ case A10SR_RESET_BQSPI:
+ case A10SR_RESET_USB:
+ return id + 11;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int a10sr_reset_update(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct a10sr_reset *a10r = to_a10sr_rst(rcdev);
+ int offset = a10sr_reset_shift(id);
+ u8 mask = ALTR_A10SR_REG_BIT_MASK(offset);
+ int index = ALTR_A10SR_HPS_RST_REG + ALTR_A10SR_REG_OFFSET(offset);
+
+ return regmap_update_bits(a10r->regmap, index, mask, assert ? 0 : mask);
+}
+
+static int a10sr_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return a10sr_reset_update(rcdev, id, true);
+}
+
+static int a10sr_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return a10sr_reset_update(rcdev, id, false);
+}
+
+static int a10sr_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int ret;
+ struct a10sr_reset *a10r = to_a10sr_rst(rcdev);
+ int offset = a10sr_reset_shift(id);
+ u8 mask = ALTR_A10SR_REG_BIT_MASK(offset);
+ int index = ALTR_A10SR_HPS_RST_REG + ALTR_A10SR_REG_OFFSET(offset);
+ unsigned int value;
+
+ ret = regmap_read(a10r->regmap, index, &value);
+ if (ret < 0)
+ return ret;
+
+ return !!(value & mask);
+}
+
+static const struct reset_control_ops a10sr_reset_ops = {
+ .assert = a10sr_reset_assert,
+ .deassert = a10sr_reset_deassert,
+ .status = a10sr_reset_status,
+};
+
+static int a10sr_reset_probe(struct platform_device *pdev)
+{
+ struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+ struct a10sr_reset *a10r;
+
+ a10r = devm_kzalloc(&pdev->dev, sizeof(struct a10sr_reset),
+ GFP_KERNEL);
+ if (!a10r)
+ return -ENOMEM;
+
+ a10r->rcdev.owner = THIS_MODULE;
+ a10r->rcdev.nr_resets = A10SR_RESET_NUM;
+ a10r->rcdev.ops = &a10sr_reset_ops;
+ a10r->rcdev.of_node = pdev->dev.of_node;
+ a10r->regmap = a10sr->regmap;
+
+ platform_set_drvdata(pdev, a10r);
+
+ return devm_reset_controller_register(&pdev->dev, &a10r->rcdev);
+}
+
+static const struct of_device_id a10sr_reset_of_match[] = {
+ { .compatible = "altr,a10sr-reset" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, a10sr_reset_of_match);
+
+static struct platform_driver a10sr_reset_driver = {
+ .probe = a10sr_reset_probe,
+ .driver = {
+ .name = "altr_a10sr_reset",
+ },
+};
+module_platform_driver(a10sr_reset_driver);
+
+MODULE_AUTHOR("Thor Thayer <thor.thayer@linux.intel.com>");
+MODULE_DESCRIPTION("Altera Arria10 System Resource Reset Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/reset/reset-ath79.c b/drivers/reset/reset-ath79.c
index 6b97631..2674880 100644
--- a/drivers/reset/reset-ath79.c
+++ b/drivers/reset/reset-ath79.c
@@ -1,4 +1,7 @@
/*
+ * AR71xx Reset Controller Driver
+ * Author: Alban Bedel
+ *
* Copyright (C) 2015 Alban Bedel <albeu@free.fr>
*
* This program is free software; you can redistribute it and/or modify
@@ -13,7 +16,7 @@
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/reboot.h>
@@ -127,31 +130,17 @@ static int ath79_reset_probe(struct platform_device *pdev)
return 0;
}
-static int ath79_reset_remove(struct platform_device *pdev)
-{
- struct ath79_reset *ath79_reset = platform_get_drvdata(pdev);
-
- unregister_restart_handler(&ath79_reset->restart_nb);
-
- return 0;
-}
-
static const struct of_device_id ath79_reset_dt_ids[] = {
{ .compatible = "qca,ar7100-reset", },
{ },
};
-MODULE_DEVICE_TABLE(of, ath79_reset_dt_ids);
static struct platform_driver ath79_reset_driver = {
.probe = ath79_reset_probe,
- .remove = ath79_reset_remove,
.driver = {
- .name = "ath79-reset",
- .of_match_table = ath79_reset_dt_ids,
+ .name = "ath79-reset",
+ .of_match_table = ath79_reset_dt_ids,
+ .suppress_bind_attrs = true,
},
};
-module_platform_driver(ath79_reset_driver);
-
-MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-MODULE_DESCRIPTION("AR71xx Reset Controller Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(ath79_reset_driver);
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
new file mode 100644
index 0000000..4db177b
--- /dev/null
+++ b/drivers/reset/reset-imx7.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ *
+ * i.MX7 System Reset Controller (SRC) driver
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/regmap.h>
+#include <dt-bindings/reset/imx7-reset.h>
+
+struct imx7_src {
+ struct reset_controller_dev rcdev;
+ struct regmap *regmap;
+};
+
+enum imx7_src_registers {
+ SRC_A7RCR0 = 0x0004,
+ SRC_M4RCR = 0x000c,
+ SRC_ERCR = 0x0014,
+ SRC_HSICPHY_RCR = 0x001c,
+ SRC_USBOPHY1_RCR = 0x0020,
+ SRC_USBOPHY2_RCR = 0x0024,
+ SRC_MIPIPHY_RCR = 0x0028,
+ SRC_PCIEPHY_RCR = 0x002c,
+ SRC_DDRC_RCR = 0x1000,
+};
+
+struct imx7_src_signal {
+ unsigned int offset, bit;
+};
+
+static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
+ [IMX7_RESET_A7_CORE_POR_RESET0] = { SRC_A7RCR0, BIT(0) },
+ [IMX7_RESET_A7_CORE_POR_RESET1] = { SRC_A7RCR0, BIT(1) },
+ [IMX7_RESET_A7_CORE_RESET0] = { SRC_A7RCR0, BIT(4) },
+ [IMX7_RESET_A7_CORE_RESET1] = { SRC_A7RCR0, BIT(5) },
+ [IMX7_RESET_A7_DBG_RESET0] = { SRC_A7RCR0, BIT(8) },
+ [IMX7_RESET_A7_DBG_RESET1] = { SRC_A7RCR0, BIT(9) },
+ [IMX7_RESET_A7_ETM_RESET0] = { SRC_A7RCR0, BIT(12) },
+ [IMX7_RESET_A7_ETM_RESET1] = { SRC_A7RCR0, BIT(13) },
+ [IMX7_RESET_A7_SOC_DBG_RESET] = { SRC_A7RCR0, BIT(20) },
+ [IMX7_RESET_A7_L2RESET] = { SRC_A7RCR0, BIT(21) },
+ [IMX7_RESET_SW_M4C_RST] = { SRC_M4RCR, BIT(1) },
+ [IMX7_RESET_SW_M4P_RST] = { SRC_M4RCR, BIT(2) },
+ [IMX7_RESET_EIM_RST] = { SRC_ERCR, BIT(0) },
+ [IMX7_RESET_HSICPHY_PORT_RST] = { SRC_HSICPHY_RCR, BIT(1) },
+ [IMX7_RESET_USBPHY1_POR] = { SRC_USBOPHY1_RCR, BIT(0) },
+ [IMX7_RESET_USBPHY1_PORT_RST] = { SRC_USBOPHY1_RCR, BIT(1) },
+ [IMX7_RESET_USBPHY2_POR] = { SRC_USBOPHY2_RCR, BIT(0) },
+ [IMX7_RESET_USBPHY2_PORT_RST] = { SRC_USBOPHY2_RCR, BIT(1) },
+ [IMX7_RESET_MIPI_PHY_MRST] = { SRC_MIPIPHY_RCR, BIT(1) },
+ [IMX7_RESET_MIPI_PHY_SRST] = { SRC_MIPIPHY_RCR, BIT(2) },
+ [IMX7_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) },
+ [IMX7_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
+ [IMX7_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
+ [IMX7_RESET_DDRC_PRST] = { SRC_DDRC_RCR, BIT(0) },
+ [IMX7_RESET_DDRC_CORE_RST] = { SRC_DDRC_RCR, BIT(1) },
+};
+
+static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct imx7_src, rcdev);
+}
+
+static int imx7_reset_set(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct imx7_src *imx7src = to_imx7_src(rcdev);
+ const struct imx7_src_signal *signal = &imx7_src_signals[id];
+ unsigned int value = 0;
+
+ switch (id) {
+ case IMX7_RESET_PCIEPHY:
+ /*
+ * wait for more than 10us to release phy g_rst and
+ * btnrst
+ */
+ if (!assert)
+ udelay(10);
+ break;
+
+ case IMX7_RESET_PCIE_CTRL_APPS_EN:
+ value = (assert) ? 0 : signal->bit;
+ break;
+ }
+
+ return regmap_update_bits(imx7src->regmap,
+ signal->offset, signal->bit, value);
+}
+
+static int imx7_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return imx7_reset_set(rcdev, id, true);
+}
+
+static int imx7_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return imx7_reset_set(rcdev, id, false);
+}
+
+static const struct reset_control_ops imx7_reset_ops = {
+ .assert = imx7_reset_assert,
+ .deassert = imx7_reset_deassert,
+};
+
+static int imx7_reset_probe(struct platform_device *pdev)
+{
+ struct imx7_src *imx7src;
+ struct device *dev = &pdev->dev;
+ struct regmap_config config = { .name = "src" };
+
+ imx7src = devm_kzalloc(dev, sizeof(*imx7src), GFP_KERNEL);
+ if (!imx7src)
+ return -ENOMEM;
+
+ imx7src->regmap = syscon_node_to_regmap(dev->of_node);
+ if (IS_ERR(imx7src->regmap)) {
+ dev_err(dev, "Unable to get imx7-src regmap");
+ return PTR_ERR(imx7src->regmap);
+ }
+ regmap_attach_dev(dev, imx7src->regmap, &config);
+
+ imx7src->rcdev.owner = THIS_MODULE;
+ imx7src->rcdev.nr_resets = IMX7_RESET_NUM;
+ imx7src->rcdev.ops = &imx7_reset_ops;
+ imx7src->rcdev.of_node = dev->of_node;
+
+ return devm_reset_controller_register(dev, &imx7src->rcdev);
+}
+
+static const struct of_device_id imx7_reset_dt_ids[] = {
+ { .compatible = "fsl,imx7d-src", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver imx7_reset_driver = {
+ .probe = imx7_reset_probe,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = imx7_reset_dt_ids,
+ },
+};
+builtin_platform_driver(imx7_reset_driver);
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index c32f11a..a8b915e 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -1,4 +1,6 @@
/*
+ * Amlogic Meson Reset Controller driver
+ *
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
@@ -53,7 +55,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/err.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -95,7 +97,6 @@ static const struct of_device_id meson_reset_dt_ids[] = {
{ .compatible = "amlogic,meson-gxbb-reset", },
{ /* sentinel */ },
};
-MODULE_DEVICE_TABLE(of, meson_reset_dt_ids);
static int meson_reset_probe(struct platform_device *pdev)
{
@@ -128,9 +129,4 @@ static struct platform_driver meson_reset_driver = {
.of_match_table = meson_reset_dt_ids,
},
};
-
-module_platform_driver(meson_reset_driver);
-
-MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver");
-MODULE_LICENSE("Dual BSD/GPL");
+builtin_platform_driver(meson_reset_driver);
diff --git a/drivers/reset/reset-oxnas.c b/drivers/reset/reset-oxnas.c
index 0d9036d..cf5b974 100644
--- a/drivers/reset/reset-oxnas.c
+++ b/drivers/reset/reset-oxnas.c
@@ -18,7 +18,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/err.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
@@ -83,7 +83,6 @@ static const struct of_device_id oxnas_reset_dt_ids[] = {
{ .compatible = "oxsemi,ox820-reset", },
{ /* sentinel */ },
};
-MODULE_DEVICE_TABLE(of, oxnas_reset_dt_ids);
static int oxnas_reset_probe(struct platform_device *pdev)
{
@@ -123,5 +122,4 @@ static struct platform_driver oxnas_reset_driver = {
.of_match_table = oxnas_reset_dt_ids,
},
};
-
-module_platform_driver(oxnas_reset_driver);
+builtin_platform_driver(oxnas_reset_driver);
diff --git a/drivers/reset/reset-pistachio.c b/drivers/reset/reset-pistachio.c
index bbc4c06..11d651b 100644
--- a/drivers/reset/reset-pistachio.c
+++ b/drivers/reset/reset-pistachio.c
@@ -10,7 +10,7 @@
* version 2, as published by the Free Software Foundation.
*/
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -128,7 +128,6 @@ static const struct of_device_id pistachio_reset_dt_ids[] = {
{ .compatible = "img,pistachio-reset", },
{ /* sentinel */ },
};
-MODULE_DEVICE_TABLE(of, pistachio_reset_dt_ids);
static struct platform_driver pistachio_reset_driver = {
.probe = pistachio_reset_probe,
@@ -137,8 +136,4 @@ static struct platform_driver pistachio_reset_driver = {
.of_match_table = pistachio_reset_dt_ids,
},
};
-module_platform_driver(pistachio_reset_driver);
-
-MODULE_AUTHOR("Damien Horsley <Damien.Horsley@imgtec.com>");
-MODULE_DESCRIPTION("Pistacho Reset Controller Driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(pistachio_reset_driver);
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
index 43e4a9f..07224c0 100644
--- a/drivers/reset/reset-socfpga.c
+++ b/drivers/reset/reset-socfpga.c
@@ -25,7 +25,8 @@
#include <linux/spinlock.h>
#include <linux/types.h>
-#define NR_BANKS 4
+#define BANK_INCREMENT 4
+#define NR_BANKS 8
struct socfpga_reset_data {
spinlock_t lock;
@@ -46,8 +47,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
spin_lock_irqsave(&data->lock, flags);
- reg = readl(data->membase + (bank * NR_BANKS));
- writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
+ reg = readl(data->membase + (bank * BANK_INCREMENT));
+ writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
spin_unlock_irqrestore(&data->lock, flags);
return 0;
@@ -67,8 +68,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
spin_lock_irqsave(&data->lock, flags);
- reg = readl(data->membase + (bank * NR_BANKS));
- writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
+ reg = readl(data->membase + (bank * BANK_INCREMENT));
+ writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
spin_unlock_irqrestore(&data->lock, flags);
@@ -84,7 +85,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev,
int offset = id % BITS_PER_LONG;
u32 reg;
- reg = readl(data->membase + (bank * NR_BANKS));
+ reg = readl(data->membase + (bank * BANK_INCREMENT));
return !(reg & BIT(offset));
}
diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
index b44f6b5..cd585cd 100644
--- a/drivers/reset/reset-sunxi.c
+++ b/drivers/reset/reset-sunxi.c
@@ -34,15 +34,16 @@ static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
struct sunxi_reset_data *data = container_of(rcdev,
struct sunxi_reset_data,
rcdev);
- int bank = id / BITS_PER_LONG;
- int offset = id % BITS_PER_LONG;
+ int reg_width = sizeof(u32);
+ int bank = id / (reg_width * BITS_PER_BYTE);
+ int offset = id % (reg_width * BITS_PER_BYTE);
unsigned long flags;
u32 reg;
spin_lock_irqsave(&data->lock, flags);
- reg = readl(data->membase + (bank * 4));
- writel(reg & ~BIT(offset), data->membase + (bank * 4));
+ reg = readl(data->membase + (bank * reg_width));
+ writel(reg & ~BIT(offset), data->membase + (bank * reg_width));
spin_unlock_irqrestore(&data->lock, flags);
@@ -55,15 +56,16 @@ static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
struct sunxi_reset_data *data = container_of(rcdev,
struct sunxi_reset_data,
rcdev);
- int bank = id / BITS_PER_LONG;
- int offset = id % BITS_PER_LONG;
+ int reg_width = sizeof(u32);
+ int bank = id / (reg_width * BITS_PER_BYTE);
+ int offset = id % (reg_width * BITS_PER_BYTE);
unsigned long flags;
u32 reg;
spin_lock_irqsave(&data->lock, flags);
- reg = readl(data->membase + (bank * 4));
- writel(reg | BIT(offset), data->membase + (bank * 4));
+ reg = readl(data->membase + (bank * reg_width));
+ writel(reg | BIT(offset), data->membase + (bank * reg_width));
spin_unlock_irqrestore(&data->lock, flags);
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 9c11be3..c4ba898 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -50,6 +50,15 @@ struct uniphier_reset_data {
}
/* System reset data */
+#define UNIPHIER_SLD3_SYS_RESET_NAND(id) \
+ UNIPHIER_RESETX((id), 0x2004, 2)
+
+#define UNIPHIER_LD11_SYS_RESET_NAND(id) \
+ UNIPHIER_RESETX((id), 0x200c, 0)
+
+#define UNIPHIER_LD11_SYS_RESET_EMMC(id) \
+ UNIPHIER_RESETX((id), 0x200c, 2)
+
#define UNIPHIER_SLD3_SYS_RESET_STDMAC(id) \
UNIPHIER_RESETX((id), 0x2000, 10)
@@ -65,12 +74,14 @@ struct uniphier_reset_data {
#define UNIPHIER_PRO4_SYS_RESET_USB3(id, ch) \
UNIPHIER_RESETX((id), 0x2000 + 0x4 * (ch), 17)
-const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = {
+ UNIPHIER_SLD3_SYS_RESET_NAND(2),
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* Ether, HSC, MIO */
UNIPHIER_RESET_END,
};
-const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
+ UNIPHIER_SLD3_SYS_RESET_NAND(2),
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC, MIO, RLE */
UNIPHIER_PRO4_SYS_RESET_GIO(12), /* Ether, SATA, USB3 */
UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
@@ -78,7 +89,8 @@ const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
UNIPHIER_RESET_END,
};
-const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
+ UNIPHIER_SLD3_SYS_RESET_NAND(2),
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC */
UNIPHIER_PRO4_SYS_RESET_GIO(12), /* PCIe, USB3 */
UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
@@ -86,7 +98,8 @@ const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
UNIPHIER_RESET_END,
};
-const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
+ UNIPHIER_SLD3_SYS_RESET_NAND(2),
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC, RLE */
UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
UNIPHIER_PRO4_SYS_RESET_USB3(15, 1),
@@ -100,12 +113,16 @@ const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
UNIPHIER_RESET_END,
};
-const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
+ UNIPHIER_LD11_SYS_RESET_NAND(2),
+ UNIPHIER_LD11_SYS_RESET_EMMC(4),
UNIPHIER_LD11_SYS_RESET_STDMAC(8), /* HSC, MIO */
UNIPHIER_RESET_END,
};
-const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
+ UNIPHIER_LD11_SYS_RESET_NAND(2),
+ UNIPHIER_LD11_SYS_RESET_EMMC(4),
UNIPHIER_LD11_SYS_RESET_STDMAC(8), /* HSC */
UNIPHIER_LD20_SYS_RESET_GIO(12), /* PCIe, USB3 */
UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */
@@ -134,7 +151,7 @@ const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
#define UNIPHIER_MIO_RESET_DMAC(id) \
UNIPHIER_RESETX((id), 0x110, 17)
-const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
+static const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
UNIPHIER_MIO_RESET_SD(0, 0),
UNIPHIER_MIO_RESET_SD(1, 1),
UNIPHIER_MIO_RESET_SD(2, 2),
@@ -154,7 +171,7 @@ const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
UNIPHIER_RESET_END,
};
-const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
UNIPHIER_MIO_RESET_SD(0, 0),
UNIPHIER_MIO_RESET_SD(1, 1),
UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
@@ -171,7 +188,7 @@ const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
#define UNIPHIER_PERI_RESET_FI2C(id, ch) \
UNIPHIER_RESETX((id), 0x114, 24 + (ch))
-const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
+static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_UART(0, 0),
UNIPHIER_PERI_RESET_UART(1, 1),
UNIPHIER_PERI_RESET_UART(2, 2),
@@ -184,7 +201,7 @@ const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_RESET_END,
};
-const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_UART(0, 0),
UNIPHIER_PERI_RESET_UART(1, 1),
UNIPHIER_PERI_RESET_UART(2, 2),
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
index 97f3ceb..63468cf 100644
--- a/drivers/scsi/isci/registers.h
+++ b/drivers/scsi/isci/registers.h
@@ -652,7 +652,7 @@ struct scu_iit_entry {
/*
- * TODO: Where is the SAS_LNKTOV regsiter?
+ * TODO: Where is the SAS_LNKTOV register?
* TODO: Where is the SAS_PHYTOV register? */
#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT (1)
@@ -1827,7 +1827,7 @@ struct scu_peg_registers {
};
/**
- * struct scu_registers - SCU regsiters including both PEG registers if we turn
+ * struct scu_registers - SCU registers including both PEG registers if we turn
* on that compile option. All of these registers are in the memory mapped
* space returned from BAR1.
*
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index bbea8ea..4842fc0 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -30,6 +30,7 @@
#include <linux/types.h>
#include <linux/inet.h>
#include <linux/slab.h>
+#include <linux/sched/mm.h>
#include <linux/file.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
@@ -371,10 +372,10 @@ static inline int iscsi_sw_tcp_xmit_qlen(struct iscsi_conn *conn)
static int iscsi_sw_tcp_pdu_xmit(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
- unsigned long pflags = current->flags;
+ unsigned int noreclaim_flag;
int rc = 0;
- current->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
while (iscsi_sw_tcp_xmit_qlen(conn)) {
rc = iscsi_sw_tcp_xmit(conn);
@@ -387,7 +388,7 @@ static int iscsi_sw_tcp_pdu_xmit(struct iscsi_task *task)
rc = 0;
}
- current_restore_flags(pflags, PF_MEMALLOC);
+ memalloc_noreclaim_restore(noreclaim_flag);
return rc;
}
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 0016f12c..316c3df 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -244,7 +244,7 @@ struct megasas_cmd *megasas_get_cmd(struct megasas_instance
* @instance: Adapter soft state
* @cmd: Command packet to be returned to free command pool
*/
-inline void
+void
megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
unsigned long flags;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 8981806f..099ab4c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1421,7 +1421,7 @@ void mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
Mpi2EventNotificationReply_t *mpi_reply);
void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc,
- u8 bits_to_regsiter);
+ u8 bits_to_register);
int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
u8 *issue_reset);
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index f09023f..309643f 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,7 +1,9 @@
menu "SOC (System On Chip) specific Drivers"
+source "drivers/soc/atmel/Kconfig"
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/fsl/Kconfig"
+source "drivers/soc/imx/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 05eae52..824b442 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -2,10 +2,12 @@
# Makefile for the Linux Kernel SOC specific device drivers.
#
+obj-$(CONFIG_ARCH_AT91) += atmel/
obj-y += bcm/
obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
+obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
obj-$(CONFIG_ARCH_RENESAS) += renesas/
diff --git a/drivers/soc/atmel/Kconfig b/drivers/soc/atmel/Kconfig
new file mode 100644
index 0000000..6242ebb
--- /dev/null
+++ b/drivers/soc/atmel/Kconfig
@@ -0,0 +1,6 @@
+config AT91_SOC_ID
+ bool "SoC bus for Atmel ARM SoCs"
+ depends on ARCH_AT91 || COMPILE_TEST
+ default ARCH_AT91
+ help
+ Include support for the SoC bus on the Atmel ARM SoCs.
diff --git a/drivers/soc/atmel/Makefile b/drivers/soc/atmel/Makefile
new file mode 100644
index 0000000..2d92f32
--- /dev/null
+++ b/drivers/soc/atmel/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_AT91_SOC_ID) += soc.o
diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
new file mode 100644
index 0000000..4790094
--- /dev/null
+++ b/drivers/soc/atmel/soc.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#define pr_fmt(fmt) "AT91: " fmt
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include "soc.h"
+
+#define AT91_DBGU_CIDR 0x40
+#define AT91_DBGU_EXID 0x44
+#define AT91_CHIPID_CIDR 0x00
+#define AT91_CHIPID_EXID 0x04
+#define AT91_CIDR_VERSION(x) ((x) & 0x1f)
+#define AT91_CIDR_EXT BIT(31)
+#define AT91_CIDR_MATCH_MASK 0x7fffffe0
+
+static const struct at91_soc __initconst socs[] = {
+#ifdef CONFIG_SOC_AT91RM9200
+ AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
+#endif
+#ifdef CONFIG_SOC_AT91SAM9
+ AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
+ AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
+ AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
+ AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
+ AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
+ "at91sam9m11", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
+ "at91sam9m10", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
+ "at91sam9g46", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
+ "at91sam9g45", "at91sam9g45"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
+ "at91sam9g15", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
+ "at91sam9g35", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
+ "at91sam9x35", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
+ "at91sam9g25", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
+ "at91sam9x25", "at91sam9x5"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
+ "at91sam9cn12", "at91sam9n12"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
+ "at91sam9n12", "at91sam9n12"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
+ "at91sam9cn11", "at91sam9n12"),
+ AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
+ AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
+ AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
+#endif
+#ifdef CONFIG_SOC_SAMA5
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
+ "sama5d21", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
+ "sama5d22", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
+ "sama5d23", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
+ "sama5d24", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
+ "sama5d24", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
+ "sama5d26", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
+ "sama5d27", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
+ "sama5d27", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
+ "sama5d28", "sama5d2"),
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
+ "sama5d28", "sama5d2"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
+ "sama5d31", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
+ "sama5d33", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
+ "sama5d34", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
+ "sama5d35", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
+ "sama5d36", "sama5d3"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
+ "sama5d41", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
+ "sama5d42", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
+ "sama5d43", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
+ "sama5d44", "sama5d4"),
+#endif
+ { /* sentinel */ },
+};
+
+static int __init at91_get_cidr_exid_from_dbgu(u32 *cidr, u32 *exid)
+{
+ struct device_node *np;
+ void __iomem *regs;
+
+ np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
+ if (!np)
+ np = of_find_compatible_node(NULL, NULL,
+ "atmel,at91sam9260-dbgu");
+ if (!np)
+ return -ENODEV;
+
+ regs = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!regs) {
+ pr_warn("Could not map DBGU iomem range");
+ return -ENXIO;
+ }
+
+ *cidr = readl(regs + AT91_DBGU_CIDR);
+ *exid = readl(regs + AT91_DBGU_EXID);
+
+ iounmap(regs);
+
+ return 0;
+}
+
+static int __init at91_get_cidr_exid_from_chipid(u32 *cidr, u32 *exid)
+{
+ struct device_node *np;
+ void __iomem *regs;
+
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid");
+ if (!np)
+ return -ENODEV;
+
+ regs = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!regs) {
+ pr_warn("Could not map DBGU iomem range");
+ return -ENXIO;
+ }
+
+ *cidr = readl(regs + AT91_CHIPID_CIDR);
+ *exid = readl(regs + AT91_CHIPID_EXID);
+
+ iounmap(regs);
+
+ return 0;
+}
+
+struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ const struct at91_soc *soc;
+ struct soc_device *soc_dev;
+ u32 cidr, exid;
+ int ret;
+
+ /*
+ * With SAMA5D2 and later SoCs, CIDR and EXID registers are no more
+ * in the dbgu device but in the chipid device whose purpose is only
+ * to expose these two registers.
+ */
+ ret = at91_get_cidr_exid_from_dbgu(&cidr, &exid);
+ if (ret)
+ ret = at91_get_cidr_exid_from_chipid(&cidr, &exid);
+ if (ret) {
+ if (ret == -ENODEV)
+ pr_warn("Could not find identification node");
+ return NULL;
+ }
+
+ for (soc = socs; soc->name; soc++) {
+ if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK))
+ continue;
+
+ if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid)
+ break;
+ }
+
+ if (!soc->name) {
+ pr_warn("Could not find matching SoC description\n");
+ return NULL;
+ }
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return NULL;
+
+ soc_dev_attr->family = soc->family;
+ soc_dev_attr->soc_id = soc->name;
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
+ AT91_CIDR_VERSION(cidr));
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ pr_warn("Could not register SoC device\n");
+ return NULL;
+ }
+
+ if (soc->family)
+ pr_info("Detected SoC family: %s\n", soc->family);
+ pr_info("Detected SoC: %s, revision %X\n", soc->name,
+ AT91_CIDR_VERSION(cidr));
+
+ return soc_dev;
+}
+
+static int __init atmel_soc_device_init(void)
+{
+ at91_soc_init(socs);
+
+ return 0;
+}
+subsys_initcall(atmel_soc_device_init);
diff --git a/arch/arm/mach-at91/soc.h b/drivers/soc/atmel/soc.h
similarity index 100%
rename from arch/arm/mach-at91/soc.h
rename to drivers/soc/atmel/soc.h
diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
index 94e7335..b6195fd 100644
--- a/drivers/soc/bcm/brcmstb/common.c
+++ b/drivers/soc/bcm/brcmstb/common.c
@@ -41,6 +41,15 @@ bool soc_is_brcmstb(void)
}
static const struct of_device_id sun_top_ctrl_match[] = {
+ { .compatible = "brcm,bcm7125-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7346-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7358-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7360-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7362-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7420-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7425-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7429-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7425-sun-top-ctrl", },
{ .compatible = "brcm,brcmstb-sun-top-ctrl", },
{ }
};
diff --git a/drivers/soc/fsl/qbman/qman_priv.h b/drivers/soc/fsl/qbman/qman_priv.h
index 22725bd..5fe9faf 100644
--- a/drivers/soc/fsl/qbman/qman_priv.h
+++ b/drivers/soc/fsl/qbman/qman_priv.h
@@ -33,6 +33,7 @@
#include "dpaa_sys.h"
#include <soc/fsl/qman.h>
+#include <linux/dma-mapping.h>
#include <linux/iommu.h>
#if defined(CONFIG_FSL_PAMU)
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
new file mode 100644
index 0000000..357a5d8
--- /dev/null
+++ b/drivers/soc/imx/Kconfig
@@ -0,0 +1,9 @@
+menu "i.MX SoC drivers"
+
+config IMX7_PM_DOMAINS
+ bool "i.MX7 PM domains"
+ select PM_GENERIC_DOMAINS
+ depends on SOC_IMX7D || (COMPILE_TEST && OF)
+ default y if SOC_IMX7D
+
+endmenu
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
new file mode 100644
index 0000000..5b6e396
--- /dev/null
+++ b/drivers/soc/imx/Makefile
@@ -0,0 +1,2 @@
+obj-y += gpc.o
+obj-$(CONFIG_IMX7_PM_DOMAINS) += gpcv2.o
diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
new file mode 100644
index 0000000..47e7aa9
--- /dev/null
+++ b/drivers/soc/imx/gpc.c
@@ -0,0 +1,489 @@
+/*
+ * Copyright 2015-2017 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define GPC_CNTR 0x000
+
+#define GPC_PGC_CTRL_OFFS 0x0
+#define GPC_PGC_PUPSCR_OFFS 0x4
+#define GPC_PGC_PDNSCR_OFFS 0x8
+#define GPC_PGC_SW2ISO_SHIFT 0x8
+#define GPC_PGC_SW_SHIFT 0x0
+
+#define GPC_PGC_GPU_PDN 0x260
+#define GPC_PGC_GPU_PUPSCR 0x264
+#define GPC_PGC_GPU_PDNSCR 0x268
+
+#define GPU_VPU_PUP_REQ BIT(1)
+#define GPU_VPU_PDN_REQ BIT(0)
+
+#define GPC_CLK_MAX 6
+
+#define PGC_DOMAIN_FLAG_NO_PD BIT(0)
+
+struct imx_pm_domain {
+ struct generic_pm_domain base;
+ struct regmap *regmap;
+ struct regulator *supply;
+ struct clk *clk[GPC_CLK_MAX];
+ int num_clks;
+ unsigned int reg_offs;
+ signed char cntr_pdn_bit;
+ unsigned int ipg_rate_mhz;
+ unsigned int flags;
+};
+
+static inline struct imx_pm_domain *
+to_imx_pm_domain(struct generic_pm_domain *genpd)
+{
+ return container_of(genpd, struct imx_pm_domain, base);
+}
+
+static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
+{
+ struct imx_pm_domain *pd = to_imx_pm_domain(genpd);
+ int iso, iso2sw;
+ u32 val;
+
+ if (pd->flags & PGC_DOMAIN_FLAG_NO_PD)
+ return -EBUSY;
+
+ /* Read ISO and ISO2SW power down delays */
+ regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
+ iso = val & 0x3f;
+ iso2sw = (val >> 8) & 0x3f;
+
+ /* Gate off domain when powered down */
+ regmap_update_bits(pd->regmap, pd->reg_offs + GPC_PGC_CTRL_OFFS,
+ 0x1, 0x1);
+
+ /* Request GPC to power down domain */
+ val = BIT(pd->cntr_pdn_bit);
+ regmap_update_bits(pd->regmap, GPC_CNTR, val, val);
+
+ /* Wait ISO + ISO2SW IPG clock cycles */
+ udelay(DIV_ROUND_UP(iso + iso2sw, pd->ipg_rate_mhz));
+
+ if (pd->supply)
+ regulator_disable(pd->supply);
+
+ return 0;
+}
+
+static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
+{
+ struct imx_pm_domain *pd = to_imx_pm_domain(genpd);
+ int i, ret, sw, sw2iso;
+ u32 val;
+
+ if (pd->supply) {
+ ret = regulator_enable(pd->supply);
+ if (ret) {
+ pr_err("%s: failed to enable regulator: %d\n",
+ __func__, ret);
+ return ret;
+ }
+ }
+
+ /* Enable reset clocks for all devices in the domain */
+ for (i = 0; i < pd->num_clks; i++)
+ clk_prepare_enable(pd->clk[i]);
+
+ /* Gate off domain when powered down */
+ regmap_update_bits(pd->regmap, pd->reg_offs + GPC_PGC_CTRL_OFFS,
+ 0x1, 0x1);
+
+ /* Read ISO and ISO2SW power up delays */
+ regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
+ sw = val & 0x3f;
+ sw2iso = (val >> 8) & 0x3f;
+
+ /* Request GPC to power up domain */
+ val = BIT(pd->cntr_pdn_bit + 1);
+ regmap_update_bits(pd->regmap, GPC_CNTR, val, val);
+
+ /* Wait ISO + ISO2SW IPG clock cycles */
+ udelay(DIV_ROUND_UP(sw + sw2iso, pd->ipg_rate_mhz));
+
+ /* Disable reset clocks for all devices in the domain */
+ for (i = 0; i < pd->num_clks; i++)
+ clk_disable_unprepare(pd->clk[i]);
+
+ return 0;
+}
+
+static int imx_pgc_get_clocks(struct device *dev, struct imx_pm_domain *domain)
+{
+ int i, ret;
+
+ for (i = 0; ; i++) {
+ struct clk *clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk))
+ break;
+ if (i >= GPC_CLK_MAX) {
+ dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
+ ret = -EINVAL;
+ goto clk_err;
+ }
+ domain->clk[i] = clk;
+ }
+ domain->num_clks = i;
+
+ return 0;
+
+clk_err:
+ while (i--)
+ clk_put(domain->clk[i]);
+
+ return ret;
+}
+
+static void imx_pgc_put_clocks(struct imx_pm_domain *domain)
+{
+ int i;
+
+ for (i = domain->num_clks - 1; i >= 0; i--)
+ clk_put(domain->clk[i]);
+}
+
+static int imx_pgc_parse_dt(struct device *dev, struct imx_pm_domain *domain)
+{
+ /* try to get the domain supply regulator */
+ domain->supply = devm_regulator_get_optional(dev, "power");
+ if (IS_ERR(domain->supply)) {
+ if (PTR_ERR(domain->supply) == -ENODEV)
+ domain->supply = NULL;
+ else
+ return PTR_ERR(domain->supply);
+ }
+
+ /* try to get all clocks needed for reset propagation */
+ return imx_pgc_get_clocks(dev, domain);
+}
+
+static int imx_pgc_power_domain_probe(struct platform_device *pdev)
+{
+ struct imx_pm_domain *domain = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ /* if this PD is associated with a DT node try to parse it */
+ if (dev->of_node) {
+ ret = imx_pgc_parse_dt(dev, domain);
+ if (ret)
+ return ret;
+ }
+
+ /* initially power on the domain */
+ if (domain->base.power_on)
+ domain->base.power_on(&domain->base);
+
+ if (IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) {
+ pm_genpd_init(&domain->base, NULL, false);
+ ret = of_genpd_add_provider_simple(dev->of_node, &domain->base);
+ if (ret)
+ goto genpd_err;
+ }
+
+ device_link_add(dev, dev->parent, DL_FLAG_AUTOREMOVE);
+
+ return 0;
+
+genpd_err:
+ pm_genpd_remove(&domain->base);
+ imx_pgc_put_clocks(domain);
+
+ return ret;
+}
+
+static int imx_pgc_power_domain_remove(struct platform_device *pdev)
+{
+ struct imx_pm_domain *domain = pdev->dev.platform_data;
+
+ if (IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) {
+ of_genpd_del_provider(pdev->dev.of_node);
+ pm_genpd_remove(&domain->base);
+ imx_pgc_put_clocks(domain);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id imx_pgc_power_domain_id[] = {
+ { "imx-pgc-power-domain"},
+ { },
+};
+
+static struct platform_driver imx_pgc_power_domain_driver = {
+ .driver = {
+ .name = "imx-pgc-pd",
+ },
+ .probe = imx_pgc_power_domain_probe,
+ .remove = imx_pgc_power_domain_remove,
+ .id_table = imx_pgc_power_domain_id,
+};
+builtin_platform_driver(imx_pgc_power_domain_driver)
+
+#define GPC_PGC_DOMAIN_ARM 0
+#define GPC_PGC_DOMAIN_PU 1
+#define GPC_PGC_DOMAIN_DISPLAY 2
+
+static struct genpd_power_state imx6_pm_domain_pu_state = {
+ .power_off_latency_ns = 25000,
+ .power_on_latency_ns = 2000000,
+};
+
+static struct imx_pm_domain imx_gpc_domains[] = {
+ {
+ .base = {
+ .name = "ARM",
+ },
+ }, {
+ .base = {
+ .name = "PU",
+ .power_off = imx6_pm_domain_power_off,
+ .power_on = imx6_pm_domain_power_on,
+ .states = &imx6_pm_domain_pu_state,
+ .state_count = 1,
+ },
+ .reg_offs = 0x260,
+ .cntr_pdn_bit = 0,
+ }, {
+ .base = {
+ .name = "DISPLAY",
+ .power_off = imx6_pm_domain_power_off,
+ .power_on = imx6_pm_domain_power_on,
+ },
+ .reg_offs = 0x240,
+ .cntr_pdn_bit = 4,
+ }
+};
+
+struct imx_gpc_dt_data {
+ int num_domains;
+ bool err009619_present;
+};
+
+static const struct imx_gpc_dt_data imx6q_dt_data = {
+ .num_domains = 2,
+ .err009619_present = false,
+};
+
+static const struct imx_gpc_dt_data imx6qp_dt_data = {
+ .num_domains = 2,
+ .err009619_present = true,
+};
+
+static const struct imx_gpc_dt_data imx6sl_dt_data = {
+ .num_domains = 3,
+ .err009619_present = false,
+};
+
+static const struct of_device_id imx_gpc_dt_ids[] = {
+ { .compatible = "fsl,imx6q-gpc", .data = &imx6q_dt_data },
+ { .compatible = "fsl,imx6qp-gpc", .data = &imx6qp_dt_data },
+ { .compatible = "fsl,imx6sl-gpc", .data = &imx6sl_dt_data },
+ { }
+};
+
+static const struct regmap_config imx_gpc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x2ac,
+};
+
+static struct generic_pm_domain *imx_gpc_onecell_domains[] = {
+ &imx_gpc_domains[0].base,
+ &imx_gpc_domains[1].base,
+};
+
+static struct genpd_onecell_data imx_gpc_onecell_data = {
+ .domains = imx_gpc_onecell_domains,
+ .num_domains = 2,
+};
+
+static int imx_gpc_old_dt_init(struct device *dev, struct regmap *regmap,
+ unsigned int num_domains)
+{
+ struct imx_pm_domain *domain;
+ int i, ret;
+
+ for (i = 0; i < num_domains; i++) {
+ domain = &imx_gpc_domains[i];
+ domain->regmap = regmap;
+ domain->ipg_rate_mhz = 66;
+
+ if (i == 1) {
+ domain->supply = devm_regulator_get(dev, "pu");
+ if (IS_ERR(domain->supply))
+ return PTR_ERR(domain->supply);;
+
+ ret = imx_pgc_get_clocks(dev, domain);
+ if (ret)
+ goto clk_err;
+
+ domain->base.power_on(&domain->base);
+ }
+ }
+
+ for (i = 0; i < num_domains; i++)
+ pm_genpd_init(&imx_gpc_domains[i].base, NULL, false);
+
+ if (IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) {
+ ret = of_genpd_add_provider_onecell(dev->of_node,
+ &imx_gpc_onecell_data);
+ if (ret)
+ goto genpd_err;
+ }
+
+ return 0;
+
+genpd_err:
+ for (i = 0; i < num_domains; i++)
+ pm_genpd_remove(&imx_gpc_domains[i].base);
+ imx_pgc_put_clocks(&imx_gpc_domains[GPC_PGC_DOMAIN_PU]);
+clk_err:
+ return ret;
+}
+
+static int imx_gpc_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id =
+ of_match_device(imx_gpc_dt_ids, &pdev->dev);
+ const struct imx_gpc_dt_data *of_id_data = of_id->data;
+ struct device_node *pgc_node;
+ struct regmap *regmap;
+ struct resource *res;
+ void __iomem *base;
+ int ret;
+
+ pgc_node = of_get_child_by_name(pdev->dev.of_node, "pgc");
+
+ /* bail out if DT too old and doesn't provide the necessary info */
+ if (!of_property_read_bool(pdev->dev.of_node, "#power-domain-cells") &&
+ !pgc_node)
+ return 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
+ &imx_gpc_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&pdev->dev, "failed to init regmap: %d\n",
+ ret);
+ return ret;
+ }
+
+ /* Disable PU power down in normal operation if ERR009619 is present */
+ if (of_id_data->err009619_present)
+ imx_gpc_domains[GPC_PGC_DOMAIN_PU].flags |=
+ PGC_DOMAIN_FLAG_NO_PD;
+
+ if (!pgc_node) {
+ ret = imx_gpc_old_dt_init(&pdev->dev, regmap,
+ of_id_data->num_domains);
+ if (ret)
+ return ret;
+ } else {
+ struct imx_pm_domain *domain;
+ struct platform_device *pd_pdev;
+ struct device_node *np;
+ struct clk *ipg_clk;
+ unsigned int ipg_rate_mhz;
+ int domain_index;
+
+ ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(ipg_clk))
+ return PTR_ERR(ipg_clk);
+ ipg_rate_mhz = clk_get_rate(ipg_clk) / 1000000;
+
+ for_each_child_of_node(pgc_node, np) {
+ ret = of_property_read_u32(np, "reg", &domain_index);
+ if (ret) {
+ of_node_put(np);
+ return ret;
+ }
+ if (domain_index >= of_id_data->num_domains)
+ continue;
+
+ domain = &imx_gpc_domains[domain_index];
+ domain->regmap = regmap;
+ domain->ipg_rate_mhz = ipg_rate_mhz;
+
+ pd_pdev = platform_device_alloc("imx-pgc-power-domain",
+ domain_index);
+ if (!pd_pdev) {
+ of_node_put(np);
+ return -ENOMEM;
+ }
+ pd_pdev->dev.platform_data = domain;
+ pd_pdev->dev.parent = &pdev->dev;
+ pd_pdev->dev.of_node = np;
+
+ ret = platform_device_add(pd_pdev);
+ if (ret) {
+ platform_device_put(pd_pdev);
+ of_node_put(np);
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int imx_gpc_remove(struct platform_device *pdev)
+{
+ int ret;
+
+ /*
+ * If the old DT binding is used the toplevel driver needs to
+ * de-register the power domains
+ */
+ if (!of_get_child_by_name(pdev->dev.of_node, "pgc")) {
+ of_genpd_del_provider(pdev->dev.of_node);
+
+ ret = pm_genpd_remove(&imx_gpc_domains[GPC_PGC_DOMAIN_PU].base);
+ if (ret)
+ return ret;
+ imx_pgc_put_clocks(&imx_gpc_domains[GPC_PGC_DOMAIN_PU]);
+
+ ret = pm_genpd_remove(&imx_gpc_domains[GPC_PGC_DOMAIN_ARM].base);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver imx_gpc_driver = {
+ .driver = {
+ .name = "imx-gpc",
+ .of_match_table = imx_gpc_dt_ids,
+ },
+ .probe = imx_gpc_probe,
+ .remove = imx_gpc_remove,
+};
+builtin_platform_driver(imx_gpc_driver)
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
new file mode 100644
index 0000000..3039072
--- /dev/null
+++ b/drivers/soc/imx/gpcv2.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright 2017 Impinj, Inc
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * Based on the code of analogus driver:
+ *
+ * Copyright 2015-2017 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <dt-bindings/power/imx7-power.h>
+
+#define GPC_LPCR_A7_BSC 0x000
+
+#define GPC_PGC_CPU_MAPPING 0x0ec
+#define USB_HSIC_PHY_A7_DOMAIN BIT(6)
+#define USB_OTG2_PHY_A7_DOMAIN BIT(5)
+#define USB_OTG1_PHY_A7_DOMAIN BIT(4)
+#define PCIE_PHY_A7_DOMAIN BIT(3)
+#define MIPI_PHY_A7_DOMAIN BIT(2)
+
+#define GPC_PU_PGC_SW_PUP_REQ 0x0f8
+#define GPC_PU_PGC_SW_PDN_REQ 0x104
+#define USB_HSIC_PHY_SW_Pxx_REQ BIT(4)
+#define USB_OTG2_PHY_SW_Pxx_REQ BIT(3)
+#define USB_OTG1_PHY_SW_Pxx_REQ BIT(2)
+#define PCIE_PHY_SW_Pxx_REQ BIT(1)
+#define MIPI_PHY_SW_Pxx_REQ BIT(0)
+
+#define GPC_M4_PU_PDN_FLG 0x1bc
+
+
+#define PGC_MIPI 4
+#define PGC_PCIE 5
+#define PGC_USB_HSIC 8
+#define GPC_PGC_CTRL(n) (0x800 + (n) * 0x40)
+#define GPC_PGC_SR(n) (GPC_PGC_CTRL(n) + 0xc)
+
+#define GPC_PGC_CTRL_PCR BIT(0)
+
+struct imx7_pgc_domain {
+ struct generic_pm_domain genpd;
+ struct regmap *regmap;
+ struct regulator *regulator;
+
+ unsigned int pgc;
+
+ const struct {
+ u32 pxx;
+ u32 map;
+ } bits;
+
+ const int voltage;
+ struct device *dev;
+};
+
+static int imx7_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
+ bool on)
+{
+ struct imx7_pgc_domain *domain = container_of(genpd,
+ struct imx7_pgc_domain,
+ genpd);
+ unsigned int offset = on ?
+ GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
+ const bool enable_power_control = !on;
+ const bool has_regulator = !IS_ERR(domain->regulator);
+ unsigned long deadline;
+ int ret = 0;
+
+ regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+ domain->bits.map, domain->bits.map);
+
+ if (has_regulator && on) {
+ ret = regulator_enable(domain->regulator);
+ if (ret) {
+ dev_err(domain->dev, "failed to enable regulator\n");
+ goto unmap;
+ }
+ }
+
+ if (enable_power_control)
+ regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+ GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
+
+ regmap_update_bits(domain->regmap, offset,
+ domain->bits.pxx, domain->bits.pxx);
+
+ /*
+ * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
+ * for PUP_REQ/PDN_REQ bit to be cleared
+ */
+ deadline = jiffies + msecs_to_jiffies(1);
+ while (true) {
+ u32 pxx_req;
+
+ regmap_read(domain->regmap, offset, &pxx_req);
+
+ if (!(pxx_req & domain->bits.pxx))
+ break;
+
+ if (time_after(jiffies, deadline)) {
+ dev_err(domain->dev, "falied to command PGC\n");
+ ret = -ETIMEDOUT;
+ /*
+ * If we were in a process of enabling a
+ * domain and failed we might as well disable
+ * the regulator we just enabled. And if it
+ * was the opposite situation and we failed to
+ * power down -- keep the regulator on
+ */
+ on = !on;
+ break;
+ }
+
+ cpu_relax();
+ }
+
+ if (enable_power_control)
+ regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+ GPC_PGC_CTRL_PCR, 0);
+
+ if (has_regulator && !on) {
+ int err;
+
+ err = regulator_disable(domain->regulator);
+ if (err)
+ dev_err(domain->dev,
+ "failed to disable regulator: %d\n", ret);
+ /* Preserve earlier error code */
+ ret = ret ?: err;
+ }
+unmap:
+ regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+ domain->bits.map, 0);
+ return ret;
+}
+
+static int imx7_gpc_pu_pgc_sw_pup_req(struct generic_pm_domain *genpd)
+{
+ return imx7_gpc_pu_pgc_sw_pxx_req(genpd, true);
+}
+
+static int imx7_gpc_pu_pgc_sw_pdn_req(struct generic_pm_domain *genpd)
+{
+ return imx7_gpc_pu_pgc_sw_pxx_req(genpd, false);
+}
+
+static struct imx7_pgc_domain imx7_pgc_domains[] = {
+ [IMX7_POWER_DOMAIN_MIPI_PHY] = {
+ .genpd = {
+ .name = "mipi-phy",
+ },
+ .bits = {
+ .pxx = MIPI_PHY_SW_Pxx_REQ,
+ .map = MIPI_PHY_A7_DOMAIN,
+ },
+ .voltage = 1000000,
+ .pgc = PGC_MIPI,
+ },
+
+ [IMX7_POWER_DOMAIN_PCIE_PHY] = {
+ .genpd = {
+ .name = "pcie-phy",
+ },
+ .bits = {
+ .pxx = PCIE_PHY_SW_Pxx_REQ,
+ .map = PCIE_PHY_A7_DOMAIN,
+ },
+ .voltage = 1000000,
+ .pgc = PGC_PCIE,
+ },
+
+ [IMX7_POWER_DOMAIN_USB_HSIC_PHY] = {
+ .genpd = {
+ .name = "usb-hsic-phy",
+ },
+ .bits = {
+ .pxx = USB_HSIC_PHY_SW_Pxx_REQ,
+ .map = USB_HSIC_PHY_A7_DOMAIN,
+ },
+ .voltage = 1200000,
+ .pgc = PGC_USB_HSIC,
+ },
+};
+
+static int imx7_pgc_domain_probe(struct platform_device *pdev)
+{
+ struct imx7_pgc_domain *domain = pdev->dev.platform_data;
+ int ret;
+
+ domain->dev = &pdev->dev;
+
+ ret = pm_genpd_init(&domain->genpd, NULL, true);
+ if (ret) {
+ dev_err(domain->dev, "Failed to init power domain\n");
+ return ret;
+ }
+
+ domain->regulator = devm_regulator_get_optional(domain->dev, "power");
+ if (IS_ERR(domain->regulator)) {
+ if (PTR_ERR(domain->regulator) != -ENODEV) {
+ dev_err(domain->dev, "Failed to get domain's regulator\n");
+ return PTR_ERR(domain->regulator);
+ }
+ } else {
+ regulator_set_voltage(domain->regulator,
+ domain->voltage, domain->voltage);
+ }
+
+ ret = of_genpd_add_provider_simple(domain->dev->of_node,
+ &domain->genpd);
+ if (ret) {
+ dev_err(domain->dev, "Failed to add genpd provider\n");
+ pm_genpd_remove(&domain->genpd);
+ }
+
+ return ret;
+}
+
+static int imx7_pgc_domain_remove(struct platform_device *pdev)
+{
+ struct imx7_pgc_domain *domain = pdev->dev.platform_data;
+
+ of_genpd_del_provider(domain->dev->of_node);
+ pm_genpd_remove(&domain->genpd);
+
+ return 0;
+}
+
+static const struct platform_device_id imx7_pgc_domain_id[] = {
+ { "imx7-pgc-domain", },
+ { },
+};
+
+static struct platform_driver imx7_pgc_domain_driver = {
+ .driver = {
+ .name = "imx7-pgc",
+ },
+ .probe = imx7_pgc_domain_probe,
+ .remove = imx7_pgc_domain_remove,
+ .id_table = imx7_pgc_domain_id,
+};
+builtin_platform_driver(imx7_pgc_domain_driver)
+
+static int imx_gpcv2_probe(struct platform_device *pdev)
+{
+ static const struct regmap_range yes_ranges[] = {
+ regmap_reg_range(GPC_LPCR_A7_BSC,
+ GPC_M4_PU_PDN_FLG),
+ regmap_reg_range(GPC_PGC_CTRL(PGC_MIPI),
+ GPC_PGC_SR(PGC_MIPI)),
+ regmap_reg_range(GPC_PGC_CTRL(PGC_PCIE),
+ GPC_PGC_SR(PGC_PCIE)),
+ regmap_reg_range(GPC_PGC_CTRL(PGC_USB_HSIC),
+ GPC_PGC_SR(PGC_USB_HSIC)),
+ };
+ static const struct regmap_access_table access_table = {
+ .yes_ranges = yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(yes_ranges),
+ };
+ static const struct regmap_config regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .rd_table = &access_table,
+ .wr_table = &access_table,
+ .max_register = SZ_4K,
+ };
+ struct device *dev = &pdev->dev;
+ struct device_node *pgc_np, *np;
+ struct regmap *regmap;
+ struct resource *res;
+ void __iomem *base;
+ int ret;
+
+ pgc_np = of_get_child_by_name(dev->of_node, "pgc");
+ if (!pgc_np) {
+ dev_err(dev, "No power domains specified in DT\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, ®map_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(dev, "failed to init regmap (%d)\n", ret);
+ return ret;
+ }
+
+ for_each_child_of_node(pgc_np, np) {
+ struct platform_device *pd_pdev;
+ struct imx7_pgc_domain *domain;
+ u32 domain_index;
+
+ ret = of_property_read_u32(np, "reg", &domain_index);
+ if (ret) {
+ dev_err(dev, "Failed to read 'reg' property\n");
+ of_node_put(np);
+ return ret;
+ }
+
+ if (domain_index >= ARRAY_SIZE(imx7_pgc_domains)) {
+ dev_warn(dev,
+ "Domain index %d is out of bounds\n",
+ domain_index);
+ continue;
+ }
+
+ domain = &imx7_pgc_domains[domain_index];
+ domain->regmap = regmap;
+ domain->genpd.power_on = imx7_gpc_pu_pgc_sw_pup_req;
+ domain->genpd.power_off = imx7_gpc_pu_pgc_sw_pdn_req;
+
+ pd_pdev = platform_device_alloc("imx7-pgc-domain",
+ domain_index);
+ if (!pd_pdev) {
+ dev_err(dev, "Failed to allocate platform device\n");
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ pd_pdev->dev.platform_data = domain;
+ pd_pdev->dev.parent = dev;
+ pd_pdev->dev.of_node = np;
+
+ ret = platform_device_add(pd_pdev);
+ if (ret) {
+ platform_device_put(pd_pdev);
+ of_node_put(np);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id imx_gpcv2_dt_ids[] = {
+ { .compatible = "fsl,imx7d-gpc" },
+ { }
+};
+
+static struct platform_driver imx_gpc_driver = {
+ .driver = {
+ .name = "imx-gpcv2",
+ .of_match_table = imx_gpcv2_dt_ids,
+ },
+ .probe = imx_gpcv2_probe,
+};
+builtin_platform_driver(imx_gpc_driver)
diff --git a/drivers/soc/renesas/r8a7795-sysc.c b/drivers/soc/renesas/r8a7795-sysc.c
index 5e7537c..7412666 100644
--- a/drivers/soc/renesas/r8a7795-sysc.c
+++ b/drivers/soc/renesas/r8a7795-sysc.c
@@ -1,7 +1,7 @@
/*
* Renesas R-Car H3 System Controller
*
- * Copyright (C) 2016 Glider bvba
+ * Copyright (C) 2016-2017 Glider bvba
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -10,12 +10,13 @@
#include <linux/bug.h>
#include <linux/kernel.h>
+#include <linux/sys_soc.h>
#include <dt-bindings/power/r8a7795-sysc.h>
#include "rcar-sysc.h"
-static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
+static struct rcar_sysc_area r8a7795_areas[] __initdata = {
{ "always-on", 0, 0, R8A7795_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
{ "ca57-scu", 0x1c0, 0, R8A7795_PD_CA57_SCU, R8A7795_PD_ALWAYS_ON,
PD_SCU },
@@ -40,6 +41,7 @@ static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
{ "a3vp", 0x340, 0, R8A7795_PD_A3VP, R8A7795_PD_ALWAYS_ON },
{ "cr7", 0x240, 0, R8A7795_PD_CR7, R8A7795_PD_ALWAYS_ON },
{ "a3vc", 0x380, 0, R8A7795_PD_A3VC, R8A7795_PD_ALWAYS_ON },
+ /* A2VC0 exists on ES1.x only */
{ "a2vc0", 0x3c0, 0, R8A7795_PD_A2VC0, R8A7795_PD_A3VC },
{ "a2vc1", 0x3c0, 1, R8A7795_PD_A2VC1, R8A7795_PD_A3VC },
{ "3dg-a", 0x100, 0, R8A7795_PD_3DG_A, R8A7795_PD_ALWAYS_ON },
@@ -50,7 +52,27 @@ static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
{ "a3ir", 0x180, 0, R8A7795_PD_A3IR, R8A7795_PD_ALWAYS_ON },
};
+
+ /*
+ * Fixups for R-Car H3 revisions after ES1.x
+ */
+
+static const struct soc_device_attribute r8a7795es1[] __initconst = {
+ { .soc_id = "r8a7795", .revision = "ES1.*" },
+ { /* sentinel */ }
+};
+
+static int __init r8a7795_sysc_init(void)
+{
+ if (!soc_device_match(r8a7795es1))
+ rcar_sysc_nullify(r8a7795_areas, ARRAY_SIZE(r8a7795_areas),
+ R8A7795_PD_A2VC0);
+
+ return 0;
+}
+
const struct rcar_sysc_info r8a7795_sysc_info __initconst = {
+ .init = r8a7795_sysc_init,
.areas = r8a7795_areas,
.num_areas = ARRAY_SIZE(r8a7795_areas),
};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 225c35c..528a137 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -2,7 +2,7 @@
* R-Car SYSC Power management support
*
* Copyright (C) 2014 Magnus Damm
- * Copyright (C) 2015-2016 Glider bvba
+ * Copyright (C) 2015-2017 Glider bvba
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -334,6 +334,12 @@ static int __init rcar_sysc_pd_init(void)
info = match->data;
+ if (info->init) {
+ error = info->init();
+ if (error)
+ return error;
+ }
+
has_cpg_mstp = of_find_compatible_node(NULL, NULL,
"renesas,cpg-mstp-clocks");
@@ -377,6 +383,11 @@ static int __init rcar_sysc_pd_init(void)
const struct rcar_sysc_area *area = &info->areas[i];
struct rcar_sysc_pd *pd;
+ if (!area->name) {
+ /* Skip NULLified area */
+ continue;
+ }
+
pd = kzalloc(sizeof(*pd) + strlen(area->name) + 1, GFP_KERNEL);
if (!pd) {
error = -ENOMEM;
@@ -406,6 +417,18 @@ static int __init rcar_sysc_pd_init(void)
}
early_initcall(rcar_sysc_pd_init);
+void __init rcar_sysc_nullify(struct rcar_sysc_area *areas,
+ unsigned int num_areas, u8 id)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_areas; i++)
+ if (areas[i].isr_bit == id) {
+ areas[i].name = NULL;
+ return;
+ }
+}
+
void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
{
u32 syscimr;
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index f6e842e..07edb04 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -46,6 +46,7 @@ struct rcar_sysc_area {
*/
struct rcar_sysc_info {
+ int (*init)(void); /* Optional */
const struct rcar_sysc_area *areas;
unsigned int num_areas;
};
@@ -59,4 +60,13 @@ extern const struct rcar_sysc_info r8a7792_sysc_info;
extern const struct rcar_sysc_info r8a7794_sysc_info;
extern const struct rcar_sysc_info r8a7795_sysc_info;
extern const struct rcar_sysc_info r8a7796_sysc_info;
+
+
+ /*
+ * Helpers for fixing up power area tables depending on SoC revision
+ */
+
+extern void rcar_sysc_nullify(struct rcar_sysc_area *areas,
+ unsigned int num_areas, u8 id);
+
#endif /* __SOC_RENESAS_RCAR_SYSC_H__ */
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 3309603..ca26f13 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -80,11 +80,21 @@ static const struct renesas_soc soc_rmobile_a1 __initconst __maybe_unused = {
.id = 0x40,
};
+static const struct renesas_soc soc_rz_g1h __initconst __maybe_unused = {
+ .family = &fam_rzg,
+ .id = 0x45,
+};
+
static const struct renesas_soc soc_rz_g1m __initconst __maybe_unused = {
.family = &fam_rzg,
.id = 0x47,
};
+static const struct renesas_soc soc_rz_g1n __initconst __maybe_unused = {
+ .family = &fam_rzg,
+ .id = 0x4b,
+};
+
static const struct renesas_soc soc_rz_g1e __initconst __maybe_unused = {
.family = &fam_rzg,
.id = 0x4c,
@@ -150,9 +160,15 @@ static const struct of_device_id renesas_socs[] __initconst = {
#ifdef CONFIG_ARCH_R8A7740
{ .compatible = "renesas,r8a7740", .data = &soc_rmobile_a1 },
#endif
+#ifdef CONFIG_ARCH_R8A7742
+ { .compatible = "renesas,r8a7742", .data = &soc_rz_g1h },
+#endif
#ifdef CONFIG_ARCH_R8A7743
{ .compatible = "renesas,r8a7743", .data = &soc_rz_g1m },
#endif
+#ifdef CONFIG_ARCH_R8A7744
+ { .compatible = "renesas,r8a7744", .data = &soc_rz_g1n },
+#endif
#ifdef CONFIG_ARCH_R8A7745
{ .compatible = "renesas,r8a7745", .data = &soc_rz_g1e },
#endif
@@ -254,4 +270,4 @@ static int __init renesas_soc_init(void)
return 0;
}
-core_initcall(renesas_soc_init);
+early_initcall(renesas_soc_init);
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 2455339..8b25bd5 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -8,7 +8,13 @@
config EXYNOS_PMU
bool "Exynos PMU controller driver" if COMPILE_TEST
- depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST)
+ depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST)
+ select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS
+
+# There is no need to enable these drivers for ARMv8
+config EXYNOS_PMU_ARM_DRIVERS
+ bool "Exynos PMU ARMv7-specific driver extensions" if COMPILE_TEST
+ depends on EXYNOS_PMU
config EXYNOS_PM_DOMAINS
bool "Exynos PM domains" if COMPILE_TEST
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 3619f2e..4d7694a 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -1,3 +1,5 @@
-obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \
+obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o
+
+obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \
exynos5250-pmu.o exynos5420-pmu.o
obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c
index 56d9244..bd4a76f 100644
--- a/drivers/soc/samsung/exynos-pmu.c
+++ b/drivers/soc/samsung/exynos-pmu.c
@@ -69,27 +69,37 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
}
/*
+ * Split the data between ARM architectures because it is relatively big
+ * and useless on other arch.
+ */
+#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
+#define exynos_pmu_data_arm_ptr(data) (&data)
+#else
+#define exynos_pmu_data_arm_ptr(data) NULL
+#endif
+
+/*
* PMU platform driver and devicetree bindings.
*/
static const struct of_device_id exynos_pmu_of_device_ids[] = {
{
.compatible = "samsung,exynos3250-pmu",
- .data = &exynos3250_pmu_data,
+ .data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data),
}, {
.compatible = "samsung,exynos4210-pmu",
- .data = &exynos4210_pmu_data,
+ .data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
}, {
.compatible = "samsung,exynos4212-pmu",
- .data = &exynos4212_pmu_data,
+ .data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data),
}, {
.compatible = "samsung,exynos4412-pmu",
- .data = &exynos4412_pmu_data,
+ .data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
}, {
.compatible = "samsung,exynos5250-pmu",
- .data = &exynos5250_pmu_data,
+ .data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data),
}, {
.compatible = "samsung,exynos5420-pmu",
- .data = &exynos5420_pmu_data,
+ .data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data),
}, {
.compatible = "samsung,exynos5433-pmu",
},
diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h
index a469e36..40d4229a 100644
--- a/drivers/soc/samsung/exynos-pmu.h
+++ b/drivers/soc/samsung/exynos-pmu.h
@@ -31,6 +31,8 @@ struct exynos_pmu_data {
};
extern void __iomem *pmu_base_addr;
+
+#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
/* list of all exported SoC specific data */
extern const struct exynos_pmu_data exynos3250_pmu_data;
extern const struct exynos_pmu_data exynos4210_pmu_data;
@@ -38,6 +40,7 @@ extern const struct exynos_pmu_data exynos4212_pmu_data;
extern const struct exynos_pmu_data exynos4412_pmu_data;
extern const struct exynos_pmu_data exynos5250_pmu_data;
extern const struct exynos_pmu_data exynos5420_pmu_data;
+#endif
extern void pmu_raw_writel(u32 val, u32 offset);
extern u32 pmu_raw_readl(u32 offset);
diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
index e5e124c..dcf088d 100644
--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -12,6 +12,8 @@
select PINCTRL_TEGRA20
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
+ select SOC_TEGRA_FLOWCTRL
+ select SOC_TEGRA_PMC
select TEGRA_TIMER
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
@@ -23,6 +25,8 @@
select ARM_ERRATA_764369 if SMP
select PINCTRL_TEGRA30
select PL310_ERRATA_769419 if CACHE_L2X0
+ select SOC_TEGRA_FLOWCTRL
+ select SOC_TEGRA_PMC
select TEGRA_TIMER
help
Support for NVIDIA Tegra T30 processor family, based on the
@@ -33,6 +37,8 @@
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
select PINCTRL_TEGRA114
+ select SOC_TEGRA_FLOWCTRL
+ select SOC_TEGRA_PMC
select TEGRA_TIMER
help
Support for NVIDIA Tegra T114 processor family, based on the
@@ -42,6 +48,8 @@
bool "Enable support for Tegra124 family"
select HAVE_ARM_ARCH_TIMER
select PINCTRL_TEGRA124
+ select SOC_TEGRA_FLOWCTRL
+ select SOC_TEGRA_PMC
select TEGRA_TIMER
help
Support for NVIDIA Tegra T124 processor family, based on the
@@ -55,6 +63,8 @@
config ARCH_TEGRA_132_SOC
bool "NVIDIA Tegra132 SoC"
select PINCTRL_TEGRA124
+ select SOC_TEGRA_FLOWCTRL
+ select SOC_TEGRA_PMC
help
Enable support for NVIDIA Tegra132 SoC, based on the Denver
ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC,
@@ -64,6 +74,8 @@
config ARCH_TEGRA_210_SOC
bool "NVIDIA Tegra210 SoC"
select PINCTRL_TEGRA210
+ select SOC_TEGRA_FLOWCTRL
+ select SOC_TEGRA_PMC
help
Enable support for the NVIDIA Tegra210 SoC. Also known as Tegra X1,
the Tegra210 has four Cortex-A57 cores paired with four Cortex-A53
@@ -83,6 +95,7 @@
select TEGRA_BPMP
select TEGRA_HSP_MBOX
select TEGRA_IVC
+ select SOC_TEGRA_PMC_TEGRA186
help
Enable support for the NVIDIA Tegar186 SoC. The Tegra186 features a
combination of Denver and Cortex-A57 CPU cores and a GPU based on
@@ -93,3 +106,12 @@
endif
endif
+
+config SOC_TEGRA_FLOWCTRL
+ bool
+
+config SOC_TEGRA_PMC
+ bool
+
+config SOC_TEGRA_PMC_TEGRA186
+ bool
diff --git a/drivers/soc/tegra/Makefile b/drivers/soc/tegra/Makefile
index ae857ff..4f81dd5 100644
--- a/drivers/soc/tegra/Makefile
+++ b/drivers/soc/tegra/Makefile
@@ -1,4 +1,6 @@
obj-y += fuse/
obj-y += common.o
-obj-y += pmc.o
+obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o
+obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o
+obj-$(CONFIG_SOC_TEGRA_PMC_TEGRA186) += pmc-tegra186.o
diff --git a/arch/arm/mach-tegra/flowctrl.c b/drivers/soc/tegra/flowctrl.c
similarity index 67%
rename from arch/arm/mach-tegra/flowctrl.c
rename to drivers/soc/tegra/flowctrl.c
index 475e783..0e345c0 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/drivers/soc/tegra/flowctrl.c
@@ -1,7 +1,7 @@
/*
- * arch/arm/mach-tegra/flowctrl.c
+ * drivers/soc/tegra/flowctrl.c
*
- * functions and macros to control the flowcontroller
+ * Functions and macros to control the flowcontroller
*
* Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
*
@@ -24,11 +24,12 @@
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <soc/tegra/common.h>
+#include <soc/tegra/flowctrl.h>
#include <soc/tegra/fuse.h>
-#include "flowctrl.h"
-
static u8 flowctrl_offset_halt_cpu[] = {
FLOW_CTRL_HALT_CPU0_EVENTS,
FLOW_CTRL_HALT_CPU1_EVENTS,
@@ -47,6 +48,10 @@ static void __iomem *tegra_flowctrl_base;
static void flowctrl_update(u8 offset, u32 value)
{
+ if (WARN_ONCE(IS_ERR_OR_NULL(tegra_flowctrl_base),
+ "Tegra flowctrl not initialised!\n"))
+ return;
+
writel(value, tegra_flowctrl_base + offset);
/* ensure the update has reached the flow controller */
@@ -58,6 +63,10 @@ u32 flowctrl_read_cpu_csr(unsigned int cpuid)
{
u8 offset = flowctrl_offset_cpu_csr[cpuid];
+ if (WARN_ONCE(IS_ERR_OR_NULL(tegra_flowctrl_base),
+ "Tegra flowctrl not initialised!\n"))
+ return 0;
+
return readl(tegra_flowctrl_base + offset);
}
@@ -140,7 +149,23 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
flowctrl_write_cpu_csr(cpuid, reg);
}
-static const struct of_device_id matches[] __initconst = {
+static int tegra_flowctrl_probe(struct platform_device *pdev)
+{
+ void __iomem *base = tegra_flowctrl_base;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tegra_flowctrl_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tegra_flowctrl_base))
+ return PTR_ERR(base);
+
+ iounmap(base);
+
+ return 0;
+}
+
+static const struct of_device_id tegra_flowctrl_match[] = {
+ { .compatible = "nvidia,tegra210-flowctrl" },
{ .compatible = "nvidia,tegra124-flowctrl" },
{ .compatible = "nvidia,tegra114-flowctrl" },
{ .compatible = "nvidia,tegra30-flowctrl" },
@@ -148,24 +173,52 @@ static const struct of_device_id matches[] __initconst = {
{ }
};
-void __init tegra_flowctrl_init(void)
+static struct platform_driver tegra_flowctrl_driver = {
+ .driver = {
+ .name = "tegra-flowctrl",
+ .suppress_bind_attrs = true,
+ .of_match_table = tegra_flowctrl_match,
+ },
+ .probe = tegra_flowctrl_probe,
+};
+builtin_platform_driver(tegra_flowctrl_driver);
+
+static int __init tegra_flowctrl_init(void)
{
- /* hardcoded fallback if device tree node is missing */
- unsigned long base = 0x60007000;
- unsigned long size = SZ_4K;
+ struct resource res;
struct device_node *np;
- np = of_find_matching_node(NULL, matches);
+ if (!soc_is_tegra())
+ return 0;
+
+ np = of_find_matching_node(NULL, tegra_flowctrl_match);
if (np) {
- struct resource res;
-
- if (of_address_to_resource(np, 0, &res) == 0) {
- size = resource_size(&res);
- base = res.start;
+ if (of_address_to_resource(np, 0, &res) < 0) {
+ pr_err("failed to get flowctrl register\n");
+ return -ENXIO;
}
-
of_node_put(np);
+ } else if (IS_ENABLED(CONFIG_ARM)) {
+ /*
+ * Hardcoded fallback for 32-bit Tegra
+ * devices if device tree node is missing.
+ */
+ res.start = 0x60007000;
+ res.end = 0x60007fff;
+ res.flags = IORESOURCE_MEM;
+ } else {
+ /*
+ * At this point we're running on a Tegra,
+ * that doesn't support the flow controller
+ * (eg. Tegra186), so just return.
+ */
+ return 0;
}
- tegra_flowctrl_base = ioremap_nocache(base, size);
+ tegra_flowctrl_base = ioremap_nocache(res.start, resource_size(&res));
+ if (!tegra_flowctrl_base)
+ return -ENXIO;
+
+ return 0;
}
+early_initcall(tegra_flowctrl_init);
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index de2c1bf..7413f60 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -18,7 +18,7 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/kobject.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -168,7 +168,7 @@ static struct platform_driver tegra_fuse_driver = {
},
.probe = tegra_fuse_probe,
};
-module_platform_driver(tegra_fuse_driver);
+builtin_platform_driver(tegra_fuse_driver);
bool __init tegra_fuse_read_spare(unsigned int spare)
{
diff --git a/drivers/soc/tegra/pmc-tegra186.c b/drivers/soc/tegra/pmc-tegra186.c
new file mode 100644
index 0000000..6f5c6f9
--- /dev/null
+++ b/drivers/soc/tegra/pmc-tegra186.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#define pr_fmt(fmt) "tegra-pmc: " fmt
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/system_misc.h>
+
+#define PMC_CNTRL 0x000
+#define PMC_CNTRL_MAIN_RST BIT(4)
+
+#define PMC_RST_STATUS 0x070
+
+#define WAKE_AOWAKE_CTRL 0x4f4
+#define WAKE_AOWAKE_CTRL_INTR_POLARITY BIT(0)
+
+#define SCRATCH_SCRATCH0 0x2000
+#define SCRATCH_SCRATCH0_MODE_RECOVERY BIT(31)
+#define SCRATCH_SCRATCH0_MODE_BOOTLOADER BIT(30)
+#define SCRATCH_SCRATCH0_MODE_RCM BIT(1)
+#define SCRATCH_SCRATCH0_MODE_MASK (SCRATCH_SCRATCH0_MODE_RECOVERY | \
+ SCRATCH_SCRATCH0_MODE_BOOTLOADER | \
+ SCRATCH_SCRATCH0_MODE_RCM)
+
+struct tegra_pmc {
+ struct device *dev;
+ void __iomem *regs;
+ void __iomem *wake;
+ void __iomem *aotag;
+ void __iomem *scratch;
+
+ void (*system_restart)(enum reboot_mode mode, const char *cmd);
+ struct notifier_block restart;
+};
+
+static int tegra186_pmc_restart_notify(struct notifier_block *nb,
+ unsigned long action,
+ void *data)
+{
+ struct tegra_pmc *pmc = container_of(nb, struct tegra_pmc, restart);
+ const char *cmd = data;
+ u32 value;
+
+ value = readl(pmc->scratch + SCRATCH_SCRATCH0);
+ value &= ~SCRATCH_SCRATCH0_MODE_MASK;
+
+ if (cmd) {
+ if (strcmp(cmd, "recovery") == 0)
+ value |= SCRATCH_SCRATCH0_MODE_RECOVERY;
+
+ if (strcmp(cmd, "bootloader") == 0)
+ value |= SCRATCH_SCRATCH0_MODE_BOOTLOADER;
+
+ if (strcmp(cmd, "forced-recovery") == 0)
+ value |= SCRATCH_SCRATCH0_MODE_RCM;
+ }
+
+ writel(value, pmc->scratch + SCRATCH_SCRATCH0);
+
+ /*
+ * If available, call the system restart implementation that was
+ * registered earlier (typically PSCI).
+ */
+ if (pmc->system_restart) {
+ pmc->system_restart(reboot_mode, cmd);
+ return NOTIFY_DONE;
+ }
+
+ /* reset everything but SCRATCH0_SCRATCH0 and PMC_RST_STATUS */
+ value = readl(pmc->regs + PMC_CNTRL);
+ value |= PMC_CNTRL_MAIN_RST;
+ writel(value, pmc->regs + PMC_CNTRL);
+
+ return NOTIFY_DONE;
+}
+
+static int tegra186_pmc_setup(struct tegra_pmc *pmc)
+{
+ struct device_node *np = pmc->dev->of_node;
+ bool invert;
+ u32 value;
+
+ invert = of_property_read_bool(np, "nvidia,invert-interrupt");
+
+ value = readl(pmc->wake + WAKE_AOWAKE_CTRL);
+
+ if (invert)
+ value |= WAKE_AOWAKE_CTRL_INTR_POLARITY;
+ else
+ value &= ~WAKE_AOWAKE_CTRL_INTR_POLARITY;
+
+ writel(value, pmc->wake + WAKE_AOWAKE_CTRL);
+
+ /*
+ * We need to hook any system restart implementation registered
+ * previously so we can write SCRATCH_SCRATCH0 before reset.
+ */
+ pmc->system_restart = arm_pm_restart;
+ arm_pm_restart = NULL;
+
+ pmc->restart.notifier_call = tegra186_pmc_restart_notify;
+ pmc->restart.priority = 128;
+
+ return register_restart_handler(&pmc->restart);
+}
+
+static int tegra186_pmc_probe(struct platform_device *pdev)
+{
+ struct tegra_pmc *pmc;
+ struct resource *res;
+
+ pmc = devm_kzalloc(&pdev->dev, sizeof(*pmc), GFP_KERNEL);
+ if (!pmc)
+ return -ENOMEM;
+
+ pmc->dev = &pdev->dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pmc");
+ pmc->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pmc->regs))
+ return PTR_ERR(pmc->regs);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wake");
+ pmc->wake = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pmc->wake))
+ return PTR_ERR(pmc->wake);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "aotag");
+ pmc->aotag = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pmc->aotag))
+ return PTR_ERR(pmc->aotag);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "scratch");
+ pmc->scratch = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pmc->scratch))
+ return PTR_ERR(pmc->scratch);
+
+ return tegra186_pmc_setup(pmc);
+}
+
+static const struct of_device_id tegra186_pmc_of_match[] = {
+ { .compatible = "nvidia,tegra186-pmc" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tegra186_pmc_of_match);
+
+static struct platform_driver tegra186_pmc_driver = {
+ .driver = {
+ .name = "tegra186-pmc",
+ .of_match_table = tegra186_pmc_of_match,
+ },
+ .probe = tegra186_pmc_probe,
+};
+builtin_platform_driver(tegra186_pmc_driver);
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 3557c5e..39e152a 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -38,4 +38,16 @@
to communicate and use the Wakeup M3 for PM features like suspend
resume and boots it using wkup_m3_rproc driver.
+config TI_SCI_PM_DOMAINS
+ tristate "TI SCI PM Domains Driver"
+ depends on TI_SCI_PROTOCOL
+ depends on PM_GENERIC_DOMAINS
+ help
+ Generic power domain implementation for TI device implementing
+ the TI SCI protocol.
+
+ To compile this as a module, choose M here. The module will be
+ called ti_sci_pm_domains. Note this is needed early in boot before
+ rootfs may be available.
+
endif # SOC_TI
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 48ff3a7..7d57273 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -5,3 +5,4 @@
knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA) += knav_dma.o
obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o
+obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o
diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c
new file mode 100644
index 0000000..b0b2838
--- /dev/null
+++ b/drivers/soc/ti/ti_sci_pm_domains.c
@@ -0,0 +1,202 @@
+/*
+ * TI SCI Generic Power Domain Driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * J Keerthy <j-keerthy@ti.com>
+ * Dave Gerlach <d-gerlach@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+/**
+ * struct ti_sci_genpd_dev_data: holds data needed for every device attached
+ * to this genpd
+ * @idx: index of the device that identifies it with the system
+ * control processor.
+ */
+struct ti_sci_genpd_dev_data {
+ int idx;
+};
+
+/**
+ * struct ti_sci_pm_domain: TI specific data needed for power domain
+ * @ti_sci: handle to TI SCI protocol driver that provides ops to
+ * communicate with system control processor.
+ * @dev: pointer to dev for the driver for devm allocs
+ * @pd: generic_pm_domain for use with the genpd framework
+ */
+struct ti_sci_pm_domain {
+ const struct ti_sci_handle *ti_sci;
+ struct device *dev;
+ struct generic_pm_domain pd;
+};
+
+#define genpd_to_ti_sci_pd(gpd) container_of(gpd, struct ti_sci_pm_domain, pd)
+
+/**
+ * ti_sci_dev_id(): get prepopulated ti_sci id from struct dev
+ * @dev: pointer to device associated with this genpd
+ *
+ * Returns device_id stored from ti,sci_id property
+ */
+static int ti_sci_dev_id(struct device *dev)
+{
+ struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+ struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+ return sci_dev_data->idx;
+}
+
+/**
+ * ti_sci_dev_to_sci_handle(): get pointer to ti_sci_handle
+ * @dev: pointer to device associated with this genpd
+ *
+ * Returns ti_sci_handle to be used to communicate with system
+ * control processor.
+ */
+static const struct ti_sci_handle *ti_sci_dev_to_sci_handle(struct device *dev)
+{
+ struct generic_pm_domain *pd = pd_to_genpd(dev->pm_domain);
+ struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(pd);
+
+ return ti_sci_genpd->ti_sci;
+}
+
+/**
+ * ti_sci_dev_start(): genpd device start hook called to turn device on
+ * @dev: pointer to device associated with this genpd to be powered on
+ */
+static int ti_sci_dev_start(struct device *dev)
+{
+ const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
+ int idx = ti_sci_dev_id(dev);
+
+ return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
+}
+
+/**
+ * ti_sci_dev_stop(): genpd device stop hook called to turn device off
+ * @dev: pointer to device associated with this genpd to be powered off
+ */
+static int ti_sci_dev_stop(struct device *dev)
+{
+ const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
+ int idx = ti_sci_dev_id(dev);
+
+ return ti_sci->ops.dev_ops.put_device(ti_sci, idx);
+}
+
+static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
+ struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct of_phandle_args pd_args;
+ struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(domain);
+ const struct ti_sci_handle *ti_sci = ti_sci_genpd->ti_sci;
+ struct ti_sci_genpd_dev_data *sci_dev_data;
+ struct generic_pm_domain_data *genpd_data;
+ int idx, ret = 0;
+
+ ret = of_parse_phandle_with_args(np, "power-domains",
+ "#power-domain-cells", 0, &pd_args);
+ if (ret < 0)
+ return ret;
+
+ if (pd_args.args_count != 1)
+ return -EINVAL;
+
+ idx = pd_args.args[0];
+
+ /*
+ * Check the validity of the requested idx, if the index is not valid
+ * the PMMC will return a NAK here and we will not allocate it.
+ */
+ ret = ti_sci->ops.dev_ops.is_valid(ti_sci, idx);
+ if (ret)
+ return -EINVAL;
+
+ sci_dev_data = kzalloc(sizeof(*sci_dev_data), GFP_KERNEL);
+ if (!sci_dev_data)
+ return -ENOMEM;
+
+ sci_dev_data->idx = idx;
+
+ genpd_data = dev_gpd_data(dev);
+ genpd_data->data = sci_dev_data;
+
+ return 0;
+}
+
+static void ti_sci_pd_detach_dev(struct generic_pm_domain *domain,
+ struct device *dev)
+{
+ struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+ struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+ kfree(sci_dev_data);
+ genpd_data->data = NULL;
+}
+
+static const struct of_device_id ti_sci_pm_domain_matches[] = {
+ { .compatible = "ti,sci-pm-domain", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_pm_domain_matches);
+
+static int ti_sci_pm_domain_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct ti_sci_pm_domain *ti_sci_pd;
+ int ret;
+
+ ti_sci_pd = devm_kzalloc(dev, sizeof(*ti_sci_pd), GFP_KERNEL);
+ if (!ti_sci_pd)
+ return -ENOMEM;
+
+ ti_sci_pd->ti_sci = devm_ti_sci_get_handle(dev);
+ if (IS_ERR(ti_sci_pd->ti_sci))
+ return PTR_ERR(ti_sci_pd->ti_sci);
+
+ ti_sci_pd->dev = dev;
+
+ ti_sci_pd->pd.attach_dev = ti_sci_pd_attach_dev;
+ ti_sci_pd->pd.detach_dev = ti_sci_pd_detach_dev;
+
+ ti_sci_pd->pd.dev_ops.start = ti_sci_dev_start;
+ ti_sci_pd->pd.dev_ops.stop = ti_sci_dev_stop;
+
+ pm_genpd_init(&ti_sci_pd->pd, NULL, true);
+
+ ret = of_genpd_add_provider_simple(np, &ti_sci_pd->pd);
+
+ return ret;
+}
+
+static struct platform_driver ti_sci_pm_domains_driver = {
+ .probe = ti_sci_pm_domain_probe,
+ .driver = {
+ .name = "ti_sci_pm_domains",
+ .of_match_table = ti_sci_pm_domain_matches,
+ },
+};
+module_platform_driver(ti_sci_pm_domains_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI System Control Interface (SCI) Power Domain driver");
+MODULE_AUTHOR("Dave Gerlach");
diff --git a/drivers/soc/zte/zx296718_pm_domains.c b/drivers/soc/zte/zx296718_pm_domains.c
index 5ed924f..4dc5d62 100644
--- a/drivers/soc/zte/zx296718_pm_domains.c
+++ b/drivers/soc/zte/zx296718_pm_domains.c
@@ -169,7 +169,6 @@ static const struct of_device_id zx296718_pm_domain_matches[] = {
static struct platform_driver zx296718_pd_driver = {
.driver = {
.name = "zx296718-powerdomain",
- .owner = THIS_MODULE,
.of_match_table = zx296718_pm_domain_matches,
},
.probe = zx296718_pd_probe,
diff --git a/drivers/soc/zte/zx2967_pm_domains.c b/drivers/soc/zte/zx2967_pm_domains.c
index 61c8d84..c42aeaa 100644
--- a/drivers/soc/zte/zx2967_pm_domains.c
+++ b/drivers/soc/zte/zx2967_pm_domains.c
@@ -125,10 +125,8 @@ int zx2967_pd_probe(struct platform_device *pdev,
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pcubase = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(pcubase)) {
- dev_err(&pdev->dev, "ioremap fail.\n");
+ if (IS_ERR(pcubase))
return PTR_ERR(pcubase);
- }
for (i = 0; i < domain_num; ++i) {
zx_pm_domains[i]->power_on = zx2967_power_on;
diff --git a/drivers/staging/ccree/ssi_hash.c b/drivers/staging/ccree/ssi_hash.c
index 8ff5d4e..f99d421 100644
--- a/drivers/staging/ccree/ssi_hash.c
+++ b/drivers/staging/ccree/ssi_hash.c
@@ -1987,22 +1987,24 @@ static struct ssi_hash_template driver_hash[] = {
.hmac_driver_name = "hmac-sha1-dx",
.blocksize = SHA1_BLOCK_SIZE,
.synchronize = false,
- .template_ahash = {
- .init = ssi_ahash_init,
- .update = ssi_ahash_update,
- .final = ssi_ahash_final,
- .finup = ssi_ahash_finup,
- .digest = ssi_ahash_digest,
+ {
+ .template_ahash = {
+ .init = ssi_ahash_init,
+ .update = ssi_ahash_update,
+ .final = ssi_ahash_final,
+ .finup = ssi_ahash_finup,
+ .digest = ssi_ahash_digest,
#ifdef EXPORT_FIXED
- .export = ssi_ahash_export,
- .import = ssi_ahash_import,
+ .export = ssi_ahash_export,
+ .import = ssi_ahash_import,
#endif
- .setkey = ssi_ahash_setkey,
- .halg = {
- .digestsize = SHA1_DIGEST_SIZE,
- .statesize = sizeof(struct sha1_state),
+ .setkey = ssi_ahash_setkey,
+ .halg = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .statesize = sizeof(struct sha1_state),
+ },
},
- },
+ },
.hash_mode = DRV_HASH_SHA1,
.hw_mode = DRV_HASH_HW_SHA1,
.inter_digestsize = SHA1_DIGEST_SIZE,
@@ -2014,22 +2016,24 @@ static struct ssi_hash_template driver_hash[] = {
.hmac_driver_name = "hmac-sha256-dx",
.blocksize = SHA256_BLOCK_SIZE,
.synchronize = false,
- .template_ahash = {
- .init = ssi_ahash_init,
- .update = ssi_ahash_update,
- .final = ssi_ahash_final,
- .finup = ssi_ahash_finup,
- .digest = ssi_ahash_digest,
+ {
+ .template_ahash = {
+ .init = ssi_ahash_init,
+ .update = ssi_ahash_update,
+ .final = ssi_ahash_final,
+ .finup = ssi_ahash_finup,
+ .digest = ssi_ahash_digest,
#ifdef EXPORT_FIXED
- .export = ssi_ahash_export,
- .import = ssi_ahash_import,
+ .export = ssi_ahash_export,
+ .import = ssi_ahash_import,
#endif
- .setkey = ssi_ahash_setkey,
- .halg = {
- .digestsize = SHA256_DIGEST_SIZE,
- .statesize = sizeof(struct sha256_state),
+ .setkey = ssi_ahash_setkey,
+ .halg = {
+ .digestsize = SHA256_DIGEST_SIZE,
+ .statesize = sizeof(struct sha256_state),
+ },
},
- },
+ },
.hash_mode = DRV_HASH_SHA256,
.hw_mode = DRV_HASH_HW_SHA256,
.inter_digestsize = SHA256_DIGEST_SIZE,
@@ -2041,22 +2045,24 @@ static struct ssi_hash_template driver_hash[] = {
.hmac_driver_name = "hmac-sha224-dx",
.blocksize = SHA224_BLOCK_SIZE,
.synchronize = false,
- .template_ahash = {
- .init = ssi_ahash_init,
- .update = ssi_ahash_update,
- .final = ssi_ahash_final,
- .finup = ssi_ahash_finup,
- .digest = ssi_ahash_digest,
+ {
+ .template_ahash = {
+ .init = ssi_ahash_init,
+ .update = ssi_ahash_update,
+ .final = ssi_ahash_final,
+ .finup = ssi_ahash_finup,
+ .digest = ssi_ahash_digest,
#ifdef EXPORT_FIXED
- .export = ssi_ahash_export,
- .import = ssi_ahash_import,
+ .export = ssi_ahash_export,
+ .import = ssi_ahash_import,
#endif
- .setkey = ssi_ahash_setkey,
- .halg = {
- .digestsize = SHA224_DIGEST_SIZE,
- .statesize = sizeof(struct sha256_state),
+ .setkey = ssi_ahash_setkey,
+ .halg = {
+ .digestsize = SHA224_DIGEST_SIZE,
+ .statesize = sizeof(struct sha256_state),
+ },
},
- },
+ },
.hash_mode = DRV_HASH_SHA224,
.hw_mode = DRV_HASH_HW_SHA256,
.inter_digestsize = SHA256_DIGEST_SIZE,
@@ -2069,22 +2075,24 @@ static struct ssi_hash_template driver_hash[] = {
.hmac_driver_name = "hmac-sha384-dx",
.blocksize = SHA384_BLOCK_SIZE,
.synchronize = false,
- .template_ahash = {
- .init = ssi_ahash_init,
- .update = ssi_ahash_update,
- .final = ssi_ahash_final,
- .finup = ssi_ahash_finup,
- .digest = ssi_ahash_digest,
+ {
+ .template_ahash = {
+ .init = ssi_ahash_init,
+ .update = ssi_ahash_update,
+ .final = ssi_ahash_final,
+ .finup = ssi_ahash_finup,
+ .digest = ssi_ahash_digest,
#ifdef EXPORT_FIXED
- .export = ssi_ahash_export,
- .import = ssi_ahash_import,
+ .export = ssi_ahash_export,
+ .import = ssi_ahash_import,
#endif
- .setkey = ssi_ahash_setkey,
- .halg = {
- .digestsize = SHA384_DIGEST_SIZE,
- .statesize = sizeof(struct sha512_state),
+ .setkey = ssi_ahash_setkey,
+ .halg = {
+ .digestsize = SHA384_DIGEST_SIZE,
+ .statesize = sizeof(struct sha512_state),
+ },
},
- },
+ },
.hash_mode = DRV_HASH_SHA384,
.hw_mode = DRV_HASH_HW_SHA512,
.inter_digestsize = SHA512_DIGEST_SIZE,
@@ -2096,22 +2104,24 @@ static struct ssi_hash_template driver_hash[] = {
.hmac_driver_name = "hmac-sha512-dx",
.blocksize = SHA512_BLOCK_SIZE,
.synchronize = false,
- .template_ahash = {
- .init = ssi_ahash_init,
- .update = ssi_ahash_update,
- .final = ssi_ahash_final,
- .finup = ssi_ahash_finup,
- .digest = ssi_ahash_digest,
+ {
+ .template_ahash = {
+ .init = ssi_ahash_init,
+ .update = ssi_ahash_update,
+ .final = ssi_ahash_final,
+ .finup = ssi_ahash_finup,
+ .digest = ssi_ahash_digest,
#ifdef EXPORT_FIXED
- .export = ssi_ahash_export,
- .import = ssi_ahash_import,
+ .export = ssi_ahash_export,
+ .import = ssi_ahash_import,
#endif
- .setkey = ssi_ahash_setkey,
- .halg = {
- .digestsize = SHA512_DIGEST_SIZE,
- .statesize = sizeof(struct sha512_state),
+ .setkey = ssi_ahash_setkey,
+ .halg = {
+ .digestsize = SHA512_DIGEST_SIZE,
+ .statesize = sizeof(struct sha512_state),
+ },
},
- },
+ },
.hash_mode = DRV_HASH_SHA512,
.hw_mode = DRV_HASH_HW_SHA512,
.inter_digestsize = SHA512_DIGEST_SIZE,
@@ -2124,22 +2134,24 @@ static struct ssi_hash_template driver_hash[] = {
.hmac_driver_name = "hmac-md5-dx",
.blocksize = MD5_HMAC_BLOCK_SIZE,
.synchronize = false,
- .template_ahash = {
- .init = ssi_ahash_init,
- .update = ssi_ahash_update,
- .final = ssi_ahash_final,
- .finup = ssi_ahash_finup,
- .digest = ssi_ahash_digest,
+ {
+ .template_ahash = {
+ .init = ssi_ahash_init,
+ .update = ssi_ahash_update,
+ .final = ssi_ahash_final,
+ .finup = ssi_ahash_finup,
+ .digest = ssi_ahash_digest,
#ifdef EXPORT_FIXED
- .export = ssi_ahash_export,
- .import = ssi_ahash_import,
+ .export = ssi_ahash_export,
+ .import = ssi_ahash_import,
#endif
- .setkey = ssi_ahash_setkey,
- .halg = {
- .digestsize = MD5_DIGEST_SIZE,
- .statesize = sizeof(struct md5_state),
+ .setkey = ssi_ahash_setkey,
+ .halg = {
+ .digestsize = MD5_DIGEST_SIZE,
+ .statesize = sizeof(struct md5_state),
+ },
},
- },
+ },
.hash_mode = DRV_HASH_MD5,
.hw_mode = DRV_HASH_HW_MD5,
.inter_digestsize = MD5_DIGEST_SIZE,
@@ -2149,52 +2161,56 @@ static struct ssi_hash_template driver_hash[] = {
.driver_name = "xcbc-aes-dx",
.blocksize = AES_BLOCK_SIZE,
.synchronize = false,
- .template_ahash = {
- .init = ssi_ahash_init,
- .update = ssi_mac_update,
- .final = ssi_mac_final,
- .finup = ssi_mac_finup,
- .digest = ssi_mac_digest,
- .setkey = ssi_xcbc_setkey,
+ {
+ .template_ahash = {
+ .init = ssi_ahash_init,
+ .update = ssi_mac_update,
+ .final = ssi_mac_final,
+ .finup = ssi_mac_finup,
+ .digest = ssi_mac_digest,
+ .setkey = ssi_xcbc_setkey,
#ifdef EXPORT_FIXED
- .export = ssi_ahash_export,
- .import = ssi_ahash_import,
+ .export = ssi_ahash_export,
+ .import = ssi_ahash_import,
#endif
- .halg = {
- .digestsize = AES_BLOCK_SIZE,
- .statesize = sizeof(struct aeshash_state),
+ .halg = {
+ .digestsize = AES_BLOCK_SIZE,
+ .statesize = sizeof(struct aeshash_state),
+ },
},
- },
- .hash_mode = DRV_HASH_NULL,
- .hw_mode = DRV_CIPHER_XCBC_MAC,
- .inter_digestsize = AES_BLOCK_SIZE,
},
+ .hash_mode = DRV_HASH_NULL,
+ .hw_mode = DRV_CIPHER_XCBC_MAC,
+ .inter_digestsize = AES_BLOCK_SIZE,
+ },
#if SSI_CC_HAS_CMAC
{
.name = "cmac(aes)",
.driver_name = "cmac-aes-dx",
.blocksize = AES_BLOCK_SIZE,
.synchronize = false,
- .template_ahash = {
- .init = ssi_ahash_init,
- .update = ssi_mac_update,
- .final = ssi_mac_final,
- .finup = ssi_mac_finup,
- .digest = ssi_mac_digest,
- .setkey = ssi_cmac_setkey,
+ {
+ .template_ahash = {
+ .init = ssi_ahash_init,
+ .update = ssi_mac_update,
+ .final = ssi_mac_final,
+ .finup = ssi_mac_finup,
+ .digest = ssi_mac_digest,
+ .setkey = ssi_cmac_setkey,
#ifdef EXPORT_FIXED
- .export = ssi_ahash_export,
- .import = ssi_ahash_import,
+ .export = ssi_ahash_export,
+ .import = ssi_ahash_import,
#endif
- .halg = {
- .digestsize = AES_BLOCK_SIZE,
- .statesize = sizeof(struct aeshash_state),
+ .halg = {
+ .digestsize = AES_BLOCK_SIZE,
+ .statesize = sizeof(struct aeshash_state),
+ },
},
- },
- .hash_mode = DRV_HASH_NULL,
- .hw_mode = DRV_CIPHER_CMAC,
- .inter_digestsize = AES_BLOCK_SIZE,
},
+ .hash_mode = DRV_HASH_NULL,
+ .hw_mode = DRV_CIPHER_CMAC,
+ .inter_digestsize = AES_BLOCK_SIZE,
+ },
#endif
};
diff --git a/drivers/staging/lustre/lnet/libcfs/linux/linux-mem.c b/drivers/staging/lustre/lnet/libcfs/linux/linux-mem.c
index a6a76a6..8f63826 100644
--- a/drivers/staging/lustre/lnet/libcfs/linux/linux-mem.c
+++ b/drivers/staging/lustre/lnet/libcfs/linux/linux-mem.c
@@ -45,15 +45,6 @@ EXPORT_SYMBOL(libcfs_kvzalloc);
void *libcfs_kvzalloc_cpt(struct cfs_cpt_table *cptab, int cpt, size_t size,
gfp_t flags)
{
- void *ret;
-
- ret = kzalloc_node(size, flags | __GFP_NOWARN,
- cfs_cpt_spread_node(cptab, cpt));
- if (!ret) {
- WARN_ON(!(flags & (__GFP_FS | __GFP_HIGH)));
- ret = vmalloc_node(size, cfs_cpt_spread_node(cptab, cpt));
- }
-
- return ret;
+ return kvzalloc_node(size, flags, cfs_cpt_spread_node(cptab, cpt));
}
EXPORT_SYMBOL(libcfs_kvzalloc_cpt);
diff --git a/drivers/staging/lustre/lustre/llite/llite_lib.c b/drivers/staging/lustre/lustre/llite/llite_lib.c
index 11b5a8d..ca5040c 100644
--- a/drivers/staging/lustre/lustre/llite/llite_lib.c
+++ b/drivers/staging/lustre/lustre/llite/llite_lib.c
@@ -1454,17 +1454,17 @@ int ll_setattr_raw(struct dentry *dentry, struct iattr *attr, bool hsm_import)
/* We mark all of the fields "set" so MDS/OST does not re-set them */
if (attr->ia_valid & ATTR_CTIME) {
- attr->ia_ctime = CURRENT_TIME;
+ attr->ia_ctime = current_time(inode);
attr->ia_valid |= ATTR_CTIME_SET;
}
if (!(attr->ia_valid & ATTR_ATIME_SET) &&
(attr->ia_valid & ATTR_ATIME)) {
- attr->ia_atime = CURRENT_TIME;
+ attr->ia_atime = current_time(inode);
attr->ia_valid |= ATTR_ATIME_SET;
}
if (!(attr->ia_valid & ATTR_MTIME_SET) &&
(attr->ia_valid & ATTR_MTIME)) {
- attr->ia_mtime = CURRENT_TIME;
+ attr->ia_mtime = current_time(inode);
attr->ia_valid |= ATTR_MTIME_SET;
}
diff --git a/drivers/staging/lustre/lustre/osc/osc_io.c b/drivers/staging/lustre/lustre/osc/osc_io.c
index f991bee..cbab800 100644
--- a/drivers/staging/lustre/lustre/osc/osc_io.c
+++ b/drivers/staging/lustre/lustre/osc/osc_io.c
@@ -216,7 +216,7 @@ static int osc_io_submit(const struct lu_env *env,
struct cl_object *obj = ios->cis_obj;
cl_object_attr_lock(obj);
- attr->cat_mtime = LTIME_S(CURRENT_TIME);
+ attr->cat_mtime = ktime_get_real_seconds();
attr->cat_ctime = attr->cat_mtime;
cl_object_attr_update(env, obj, attr, CAT_MTIME | CAT_CTIME);
cl_object_attr_unlock(obj);
@@ -256,7 +256,7 @@ static void osc_page_touch_at(const struct lu_env *env,
kms > loi->loi_kms ? "" : "not ", loi->loi_kms, kms,
loi->loi_lvb.lvb_size);
- attr->cat_ctime = LTIME_S(CURRENT_TIME);
+ attr->cat_ctime = ktime_get_real_seconds();
attr->cat_mtime = attr->cat_ctime;
valid = CAT_MTIME | CAT_CTIME;
if (kms > loi->loi_kms) {
diff --git a/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_bo.c b/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_bo.c
index 40ac358..11162f5 100644
--- a/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_bo.c
+++ b/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_bo.c
@@ -36,12 +36,13 @@
#include <linux/string.h>
#include <linux/list.h>
#include <linux/errno.h>
-#include <asm/cacheflush.h>
#include <linux/io.h>
#include <asm/current.h>
#include <linux/sched/signal.h>
#include <linux/file.h>
+#include <asm/set_memory.h>
+
#include "atomisp_internal.h"
#include "hmm/hmm_common.h"
#include "hmm/hmm_pool.h"
diff --git a/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_dynamic_pool.c b/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_dynamic_pool.c
index 639b8cd..19e0e9e 100644
--- a/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_dynamic_pool.c
+++ b/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_dynamic_pool.c
@@ -27,7 +27,7 @@
#include <linux/types.h>
#include <linux/mm.h>
-#include "asm/cacheflush.h"
+#include <asm/set_memory.h>
#include "atomisp_internal.h"
diff --git a/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_reserved_pool.c b/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_reserved_pool.c
index 4000c05..bf65868 100644
--- a/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_reserved_pool.c
+++ b/drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_reserved_pool.c
@@ -27,7 +27,8 @@
#include <linux/types.h>
#include <linux/mm.h>
-#include "asm/cacheflush.h"
+#include <asm/set_memory.h>
+
#include "atomisp_internal.h"
#include "hmm/hmm_pool.h"
diff --git a/drivers/staging/media/atomisp/pci/atomisp2/mmu/isp_mmu.c b/drivers/staging/media/atomisp/pci/atomisp2/mmu/isp_mmu.c
index 2009e3a..706bd43 100644
--- a/drivers/staging/media/atomisp/pci/atomisp2/mmu/isp_mmu.c
+++ b/drivers/staging/media/atomisp/pci/atomisp2/mmu/isp_mmu.c
@@ -30,13 +30,16 @@
#include <linux/slab.h> /* for kmalloc */
#include <linux/list.h>
#include <linux/io.h>
-#include <asm/cacheflush.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/sizes.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
+
#include "atomisp_internal.h"
#include "mmu/isp_mmu.h"
diff --git a/drivers/staging/most/mostcore/core.c b/drivers/staging/most/mostcore/core.c
index 675b2a9..069269d 100644
--- a/drivers/staging/most/mostcore/core.c
+++ b/drivers/staging/most/mostcore/core.c
@@ -82,7 +82,7 @@ struct most_inst_obj {
static const struct {
int most_ch_data_type;
- char *name;
+ const char *name;
} ch_data_type[] = {
{ MOST_CH_CONTROL, "control\n" },
{ MOST_CH_ASYNC, "async\n" },
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index b95bed9..f02becd 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
- tty_buffer.o tty_port.o tty_mutex.o tty_ldsem.o
+ tty_buffer.o tty_port.o tty_mutex.o \
+ tty_ldsem.o tty_baudrate.o tty_jobctrl.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-$(CONFIG_AUDIT) += tty_audit.o
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index b19ae36..a8d3991 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -920,17 +920,17 @@ int hvc_remove(struct hvc_struct *hp)
tty = tty_port_tty_get(&hp->port);
+ console_lock();
spin_lock_irqsave(&hp->lock, flags);
if (hp->index < MAX_NR_HVC_CONSOLES) {
- console_lock();
vtermnos[hp->index] = -1;
cons_ops[hp->index] = NULL;
- console_unlock();
}
/* Don't whack hp->irq because tty_hangup() will need to free the irq. */
spin_unlock_irqrestore(&hp->lock, flags);
+ console_unlock();
/*
* We 'put' the instance that was grabbed when the kref instance
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 7823d6d..99bb875 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1575,7 +1575,7 @@ static int __init hvcs_module_init(void)
*/
rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan);
if (rc)
- pr_warning("HVCS: Failed to create rescan file (err %d)\n", rc);
+ pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc);
return 0;
}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 55577cf..2667a20 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -89,18 +89,14 @@ module_param(debug, int, 0600);
/**
* struct gsm_mux_net - network interface
* @struct gsm_dlci* dlci
- * @struct net_device_stats stats;
*
* Created when net interface is initialized.
**/
struct gsm_mux_net {
struct kref ref;
struct gsm_dlci *dlci;
- struct net_device_stats stats;
};
-#define STATS(net) (((struct gsm_mux_net *)netdev_priv(net))->stats)
-
/*
* Each block of data we have queued to go out is in the form of
* a gsm_msg which holds everything we need in a link layer independent
@@ -2613,10 +2609,6 @@ static int gsm_mux_net_close(struct net_device *net)
return 0;
}
-static struct net_device_stats *gsm_mux_net_get_stats(struct net_device *net)
-{
- return &((struct gsm_mux_net *)netdev_priv(net))->stats;
-}
static void dlci_net_free(struct gsm_dlci *dlci)
{
if (!dlci->net) {
@@ -2660,8 +2652,8 @@ static int gsm_mux_net_start_xmit(struct sk_buff *skb,
muxnet_get(mux_net);
skb_queue_head(&dlci->skb_list, skb);
- STATS(net).tx_packets++;
- STATS(net).tx_bytes += skb->len;
+ net->stats.tx_packets++;
+ net->stats.tx_bytes += skb->len;
gsm_dlci_data_kick(dlci);
/* And tell the kernel when the last transmit started. */
netif_trans_update(net);
@@ -2676,7 +2668,7 @@ static void gsm_mux_net_tx_timeout(struct net_device *net)
dev_dbg(&net->dev, "Tx timed out.\n");
/* Update statistics */
- STATS(net).tx_errors++;
+ net->stats.tx_errors++;
}
static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
@@ -2691,7 +2683,7 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
skb = dev_alloc_skb(size + NET_IP_ALIGN);
if (!skb) {
/* We got no receive buffer. */
- STATS(net).rx_dropped++;
+ net->stats.rx_dropped++;
muxnet_put(mux_net);
return;
}
@@ -2705,8 +2697,8 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
netif_rx(skb);
/* update out statistics */
- STATS(net).rx_packets++;
- STATS(net).rx_bytes += size;
+ net->stats.rx_packets++;
+ net->stats.rx_bytes += size;
muxnet_put(mux_net);
return;
}
@@ -2718,7 +2710,6 @@ static void gsm_mux_net_init(struct net_device *net)
.ndo_stop = gsm_mux_net_close,
.ndo_start_xmit = gsm_mux_net_start_xmit,
.ndo_tx_timeout = gsm_mux_net_tx_timeout,
- .ndo_get_stats = gsm_mux_net_get_stats,
};
net->netdev_ops = &gsm_netdev_ops;
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index e94aea8..7b2a466 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -939,11 +939,11 @@ static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list)
return buf;
} /* end of n_hdlc_buf_get() */
-static char hdlc_banner[] __initdata =
+static const char hdlc_banner[] __initconst =
KERN_INFO "HDLC line discipline maxframe=%u\n";
-static char hdlc_register_ok[] __initdata =
+static const char hdlc_register_ok[] __initconst =
KERN_INFO "N_HDLC line discipline registered.\n";
-static char hdlc_register_fail[] __initdata =
+static const char hdlc_register_fail[] __initconst =
KERN_ERR "error registering line discipline: %d\n";
static int __init n_hdlc_init(void)
@@ -968,9 +968,9 @@ static int __init n_hdlc_init(void)
} /* end of init_module() */
-static char hdlc_unregister_ok[] __exitdata =
+static const char hdlc_unregister_ok[] __exitdata =
KERN_INFO "N_HDLC: line discipline unregistered\n";
-static char hdlc_unregister_fail[] __exitdata =
+static const char hdlc_unregister_fail[] __exitdata =
KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
static void __exit n_hdlc_exit(void)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 66b59a1..6579957 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -216,16 +216,11 @@ static int pty_signal(struct tty_struct *tty, int sig)
static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
- struct tty_ldisc *ld;
if (!to)
return;
- ld = tty_ldisc_ref(to);
- tty_buffer_flush(to, ld);
- if (ld)
- tty_ldisc_deref(ld);
-
+ tty_buffer_flush(to, NULL);
if (to->packet) {
spin_lock_irq(&tty->ctrl_lock);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 1c4829a..433de5e 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -116,17 +116,41 @@ void serdev_device_close(struct serdev_device *serdev)
}
EXPORT_SYMBOL_GPL(serdev_device_close);
-int serdev_device_write_buf(struct serdev_device *serdev,
- const unsigned char *buf, size_t count)
+void serdev_device_write_wakeup(struct serdev_device *serdev)
+{
+ complete(&serdev->write_comp);
+}
+EXPORT_SYMBOL_GPL(serdev_device_write_wakeup);
+
+int serdev_device_write(struct serdev_device *serdev,
+ const unsigned char *buf, size_t count,
+ unsigned long timeout)
{
struct serdev_controller *ctrl = serdev->ctrl;
+ int ret;
- if (!ctrl || !ctrl->ops->write_buf)
+ if (!ctrl || !ctrl->ops->write_buf ||
+ (timeout && !serdev->ops->write_wakeup))
return -EINVAL;
- return ctrl->ops->write_buf(ctrl, buf, count);
+ mutex_lock(&serdev->write_lock);
+ do {
+ reinit_completion(&serdev->write_comp);
+
+ ret = ctrl->ops->write_buf(ctrl, buf, count);
+ if (ret < 0)
+ break;
+
+ buf += ret;
+ count -= ret;
+
+ } while (count &&
+ (timeout = wait_for_completion_timeout(&serdev->write_comp,
+ timeout)));
+ mutex_unlock(&serdev->write_lock);
+ return ret < 0 ? ret : (count ? -ETIMEDOUT : 0);
}
-EXPORT_SYMBOL_GPL(serdev_device_write_buf);
+EXPORT_SYMBOL_GPL(serdev_device_write);
void serdev_device_write_flush(struct serdev_device *serdev)
{
@@ -262,6 +286,8 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl)
serdev->dev.parent = &ctrl->dev;
serdev->dev.bus = &serdev_bus_type;
serdev->dev.type = &serdev_device_type;
+ init_completion(&serdev->write_comp);
+ mutex_init(&serdev->write_lock);
return serdev;
}
EXPORT_SYMBOL_GPL(serdev_device_alloc);
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 76e03a7..48a07e2 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -218,7 +218,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
spin_unlock_irq(&i->lock);
irq_flags |= up->port.irqflags;
ret = request_irq(up->port.irq, serial8250_interrupt,
- irq_flags, "serial", i);
+ irq_flags, up->port.name, i);
if (ret < 0)
serial_do_unlink(i, up);
}
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e65808c..787b116 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -530,12 +530,11 @@ static int dw8250_probe(struct platform_device *pdev)
}
data->rst = devm_reset_control_get_optional(dev, NULL);
- if (IS_ERR(data->rst) && PTR_ERR(data->rst) == -EPROBE_DEFER) {
- err = -EPROBE_DEFER;
+ if (IS_ERR(data->rst)) {
+ err = PTR_ERR(data->rst);
goto err_pclk;
}
- if (!IS_ERR(data->rst))
- reset_control_deassert(data->rst);
+ reset_control_deassert(data->rst);
dw8250_quirks(p, data);
@@ -567,8 +566,7 @@ static int dw8250_probe(struct platform_device *pdev)
return 0;
err_reset:
- if (!IS_ERR(data->rst))
- reset_control_assert(data->rst);
+ reset_control_assert(data->rst);
err_pclk:
if (!IS_ERR(data->pclk))
@@ -589,8 +587,7 @@ static int dw8250_remove(struct platform_device *pdev)
serial8250_unregister_port(data->line);
- if (!IS_ERR(data->rst))
- reset_control_assert(data->rst);
+ reset_control_assert(data->rst);
if (!IS_ERR(data->pclk))
clk_disable_unprepare(data->pclk);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 85a12f0..82fc48e 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -39,6 +39,7 @@
static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
{
+ int reg_offset = offset;
offset <<= port->regshift;
switch (port->iotype) {
@@ -52,6 +53,8 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
return ioread32be(port->membase + offset);
case UPIO_PORT:
return inb(port->iobase + offset);
+ case UPIO_AU:
+ return port->serial_in(port, reg_offset);
default:
return 0;
}
@@ -59,6 +62,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
{
+ int reg_offset = offset;
offset <<= port->regshift;
switch (port->iotype) {
@@ -77,6 +81,9 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int
case UPIO_PORT:
outb(value, port->iobase + offset);
break;
+ case UPIO_AU:
+ port->serial_out(port, reg_offset, value);
+ break;
}
}
@@ -172,3 +179,20 @@ OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
#endif
+
+#ifdef CONFIG_SERIAL_8250_RT288X
+
+unsigned int au_serial_in(struct uart_port *p, int offset);
+void au_serial_out(struct uart_port *p, int offset, int value);
+
+static int __init early_au_setup(struct earlycon_device *dev, const char *opt)
+{
+ dev->port.serial_in = au_serial_in;
+ dev->port.serial_out = au_serial_out;
+ dev->port.iotype = UPIO_AU;
+ dev->con->write = early_serial8250_write;
+ return 0;
+}
+OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup);
+
+#endif
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b89c4ff..1270ff1 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -483,5 +483,5 @@ static struct pci_driver exar_pci_driver = {
module_pci_driver(exar_pci_driver);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Exar Serial Dricer");
+MODULE_DESCRIPTION("Exar Serial Driver");
MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index b67e7a5..e500f7d 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -61,6 +61,12 @@
* The IRQ setting mode of F81866 is not the same with F81216 series.
* Level/Low: IRQ_MODE0:0, IRQ_MODE1:0
* Edge/High: IRQ_MODE0:1, IRQ_MODE1:0
+ *
+ * Clock speeds for UART (register F2h)
+ * 00: 1.8432MHz.
+ * 01: 18.432MHz.
+ * 10: 24MHz.
+ * 11: 14.769MHz.
*/
#define F81866_IRQ_MODE 0xf0
#define F81866_IRQ_SHARE BIT(0)
@@ -72,6 +78,13 @@
#define F81866_LDN_LOW 0x10
#define F81866_LDN_HIGH 0x16
+#define F81866_UART_CLK 0xF2
+#define F81866_UART_CLK_MASK (BIT(1) | BIT(0))
+#define F81866_UART_CLK_1_8432MHZ 0
+#define F81866_UART_CLK_14_769MHZ (BIT(1) | BIT(0))
+#define F81866_UART_CLK_18_432MHZ BIT(0)
+#define F81866_UART_CLK_24MHZ BIT(1)
+
struct fintek_8250 {
u16 pid;
u16 base_port;
@@ -256,8 +269,26 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
}
}
-static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
- unsigned int irq)
+static void fintek_8250_goto_highspeed(struct uart_8250_port *uart,
+ struct fintek_8250 *pdata)
+{
+ sio_write_reg(pdata, LDN, pdata->index);
+
+ switch (pdata->pid) {
+ case CHIP_ID_F81866: /* set uart clock for high speed serial mode */
+ sio_write_mask_reg(pdata, F81866_UART_CLK,
+ F81866_UART_CLK_MASK,
+ F81866_UART_CLK_14_769MHZ);
+
+ uart->port.uartclk = 921600 * 16;
+ break;
+ default: /* leave clock speed untouched */
+ break;
+ }
+}
+
+static int probe_setup_port(struct fintek_8250 *pdata,
+ struct uart_8250_port *uart)
{
static const u16 addr[] = {0x4e, 0x2e};
static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
@@ -284,18 +315,20 @@ static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
sio_write_reg(pdata, LDN, k);
aux = sio_read_reg(pdata, IO_ADDR1);
aux |= sio_read_reg(pdata, IO_ADDR2) << 8;
- if (aux != io_address)
+ if (aux != uart->port.iobase)
continue;
pdata->index = k;
- irq_data = irq_get_irq_data(irq);
+ irq_data = irq_get_irq_data(uart->port.irq);
if (irq_data)
level_mode =
irqd_is_level_type(irq_data);
fintek_8250_set_irq_mode(pdata, level_mode);
fintek_8250_set_max_fifo(pdata);
+ fintek_8250_goto_highspeed(uart, pdata);
+
fintek_8250_exit_key(addr[i]);
return 0;
@@ -330,7 +363,7 @@ int fintek_8250_probe(struct uart_8250_port *uart)
struct fintek_8250 *pdata;
struct fintek_8250 probe_data;
- if (probe_setup_port(&probe_data, uart->port.iobase, uart->port.irq))
+ if (probe_setup_port(&probe_data, uart))
return -ENODEV;
pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index f3ea90f..7dddd7e 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -183,7 +183,6 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
if (ret)
return;
- pci_set_master(pdev);
pci_try_set_mwi(pdev);
/* Special DMA address for UART */
@@ -216,6 +215,8 @@ static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
struct pci_dev *pdev = to_pci_dev(port->dev);
int ret;
+ pci_set_master(pdev);
+
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
return ret;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 6119516..09a65a3 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -328,7 +328,7 @@ static const s8 au_io_out_map[8] = {
-1, /* UART_SCR (unmapped) */
};
-static unsigned int au_serial_in(struct uart_port *p, int offset)
+unsigned int au_serial_in(struct uart_port *p, int offset)
{
if (offset >= ARRAY_SIZE(au_io_in_map))
return UINT_MAX;
@@ -338,7 +338,7 @@ static unsigned int au_serial_in(struct uart_port *p, int offset)
return __raw_readl(p->membase + (offset << p->regshift));
}
-static void au_serial_out(struct uart_port *p, int offset, int value)
+void au_serial_out(struct uart_port *p, int offset, int value)
{
if (offset >= ARRAY_SIZE(au_io_out_map))
return;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 6117ac8..5c8850f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -630,6 +630,15 @@
console (the system console is the device which receives all kernel
messages and warnings and which allows logins in single user mode).
+config SERIAL_UARTLITE_NR_UARTS
+ int "Maximum number of uartlite serial ports"
+ depends on SERIAL_UARTLITE
+ range 1 256
+ default 1
+ help
+ Set this to the number of uartlites in your system, or the number
+ you think you might implement.
+
config SERIAL_SUNCORE
bool
depends on SPARC
@@ -1343,6 +1352,7 @@
bool "Altera JTAG UART console support"
depends on SERIAL_ALTERA_JTAGUART=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
Enable a Altera JTAG UART port to be the system console.
@@ -1382,6 +1392,7 @@
bool "Altera UART console support"
depends on SERIAL_ALTERA_UART=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
Enable a Altera UART port to be the system console.
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 2d6288b..53c03e0 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -3,7 +3,6 @@
#
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
-obj-$(CONFIG_SERIAL_21285) += 21285.o
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
@@ -17,6 +16,8 @@
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
+obj-$(CONFIG_SERIAL_21285) += 21285.o
+
# Now bring in any enabled 8250/16450/16550 type drivers.
obj-$(CONFIG_SERIAL_8250) += 8250/
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index e409d7d..18e3f83 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -383,6 +383,26 @@ console_initcall(altera_jtaguart_console_init);
#define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console)
+static void altera_jtaguart_earlycon_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct earlycon_device *dev = co->data;
+
+ uart_console_write(&dev->port, s, count, altera_jtaguart_console_putc);
+}
+
+static int __init altera_jtaguart_earlycon_setup(struct earlycon_device *dev,
+ const char *options)
+{
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ dev->con->write = altera_jtaguart_earlycon_write;
+ return 0;
+}
+
+OF_EARLYCON_DECLARE(juart, "altr,juart-1.0", altera_jtaguart_earlycon_setup);
+
#else
#define ALTERA_JTAGUART_CONSOLE NULL
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 820a742..46d3438 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -489,6 +489,38 @@ console_initcall(altera_uart_console_init);
#define ALTERA_UART_CONSOLE (&altera_uart_console)
+static void altera_uart_earlycon_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct earlycon_device *dev = co->data;
+
+ uart_console_write(&dev->port, s, count, altera_uart_console_putc);
+}
+
+static int __init altera_uart_earlycon_setup(struct earlycon_device *dev,
+ const char *options)
+{
+ struct uart_port *port = &dev->port;
+
+ if (!port->membase)
+ return -ENODEV;
+
+ /* Enable RX interrupts now */
+ writel(ALTERA_UART_CONTROL_RRDY_MSK,
+ port->membase + ALTERA_UART_CONTROL_REG);
+
+ if (dev->baud) {
+ unsigned int baudclk = port->uartclk / dev->baud;
+
+ writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+ }
+
+ dev->con->write = altera_uart_earlycon_write;
+ return 0;
+}
+
+OF_EARLYCON_DECLARE(uart, "altr,uart-1.0", altera_uart_earlycon_setup);
+
#else
#define ALTERA_UART_CONSOLE NULL
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b0a3777..8a857bb 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1327,14 +1327,15 @@ static void pl011_stop_tx(struct uart_port *port)
pl011_dma_tx_stop(uap);
}
-static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
+static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
/* Start TX with programmed I/O only (no DMA) */
static void pl011_start_tx_pio(struct uart_amba_port *uap)
{
- uap->im |= UART011_TXIM;
- pl011_write(uap->im, uap, REG_IMSC);
- pl011_tx_chars(uap, false);
+ if (pl011_tx_chars(uap, false)) {
+ uap->im |= UART011_TXIM;
+ pl011_write(uap->im, uap, REG_IMSC);
+ }
}
static void pl011_start_tx(struct uart_port *port)
@@ -1414,25 +1415,26 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
return true;
}
-static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
+/* Returns true if tx interrupts have to be (kept) enabled */
+static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
{
struct circ_buf *xmit = &uap->port.state->xmit;
int count = uap->fifosize >> 1;
if (uap->port.x_char) {
if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
- return;
+ return true;
uap->port.x_char = 0;
--count;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
pl011_stop_tx(&uap->port);
- return;
+ return false;
}
/* If we are using DMA mode, try to send some characters. */
if (pl011_dma_tx_irq(uap))
- return;
+ return true;
do {
if (likely(from_irq) && count-- == 0)
@@ -1447,8 +1449,11 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
- if (uart_circ_empty(xmit))
+ if (uart_circ_empty(xmit)) {
pl011_stop_tx(&uap->port);
+ return false;
+ }
+ return true;
}
static void pl011_modem_status(struct uart_amba_port *uap)
@@ -2470,19 +2475,34 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
if (!device->port.membase)
return -ENODEV;
- /* On QDF2400 SOCs affected by Erratum 44, the "qdf2400_e44" must
- * also be specified, e.g. "earlycon=pl011,<address>,qdf2400_e44".
- */
- if (!strcmp(device->options, "qdf2400_e44"))
- device->con->write = qdf2400_e44_early_write;
- else
- device->con->write = pl011_early_write;
+ device->con->write = pl011_early_write;
return 0;
}
OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
-EARLYCON_DECLARE(qdf2400_e44, pl011_early_console_setup);
+
+/*
+ * On Qualcomm Datacenter Technologies QDF2400 SOCs affected by
+ * Erratum 44, traditional earlycon can be enabled by specifying
+ * "earlycon=qdf2400_e44,<address>". Any options are ignored.
+ *
+ * Alternatively, you can just specify "earlycon", and the early console
+ * will be enabled with the information from the SPCR table. In this
+ * case, the SPCR code will detect the need for the E44 work-around,
+ * and set the console name to "qdf2400_e44".
+ */
+static int __init
+qdf2400_e44_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = qdf2400_e44_early_write;
+ return 0;
+}
+EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup);
#else
#define AMBA_CONSOLE NULL
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 1f50a83..c355ac9 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -38,7 +38,6 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/atmel_pdc.h>
-#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
#include <linux/platform_data/atmel.h>
#include <linux/timer.h>
@@ -71,6 +70,7 @@
#include <linux/serial_core.h>
#include "serial_mctrl_gpio.h"
+#include "atmel_serial.h"
static void atmel_start_rx(struct uart_port *port);
static void atmel_stop_rx(struct uart_port *port);
@@ -119,8 +119,9 @@ struct atmel_uart_char {
/*
* at91: 6 USARTs and one DBGU port (SAM9260)
* avr32: 4
+ * samx7: 3 USARTs and 5 UARTs
*/
-#define ATMEL_MAX_UART 7
+#define ATMEL_MAX_UART 8
/*
* We wrap our port structure around the generic uart_port.
@@ -175,6 +176,7 @@ struct atmel_uart_port {
unsigned int pending_status;
spinlock_t lock_suspended;
+#ifdef CONFIG_PM
struct {
u32 cr;
u32 mr;
@@ -185,6 +187,7 @@ struct atmel_uart_port {
u32 fmr;
u32 fimr;
} cache;
+#endif
int (*prepare_rx)(struct uart_port *port);
int (*prepare_tx)(struct uart_port *port);
diff --git a/include/linux/atmel_serial.h b/drivers/tty/serial/atmel_serial.h
similarity index 100%
rename from include/linux/atmel_serial.h
rename to drivers/tty/serial/atmel_serial.h
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index f02934f..15df1ba7 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1705,6 +1705,13 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
{
struct lpuart_port *sport = lpuart_ports[co->index];
unsigned char old_cr2, cr2;
+ unsigned long flags;
+ int locked = 1;
+
+ if (sport->port.sysrq || oops_in_progress)
+ locked = spin_trylock_irqsave(&sport->port.lock, flags);
+ else
+ spin_lock_irqsave(&sport->port.lock, flags);
/* first save CR2 and then disable interrupts */
cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
@@ -1719,6 +1726,9 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
barrier();
writeb(old_cr2, sport->port.membase + UARTCR2);
+
+ if (locked)
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void
@@ -1726,6 +1736,13 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
{
struct lpuart_port *sport = lpuart_ports[co->index];
unsigned long old_cr, cr;
+ unsigned long flags;
+ int locked = 1;
+
+ if (sport->port.sysrq || oops_in_progress)
+ locked = spin_trylock_irqsave(&sport->port.lock, flags);
+ else
+ spin_lock_irqsave(&sport->port.lock, flags);
/* first save CR2 and then disable interrupts */
cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL);
@@ -1740,6 +1757,9 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
barrier();
lpuart32_write(old_cr, sport->port.membase + UARTCTRL);
+
+ if (locked)
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
/*
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e3e152c..33509b4 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -719,6 +719,27 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static void imx_disable_rx_int(struct imx_port *sport)
+{
+ unsigned long temp;
+
+ sport->dma_is_rxing = 1;
+
+ /* disable the receiver ready and aging timer interrupts */
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~(UCR1_RRDYEN);
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~(UCR2_ATEN);
+ writel(temp, sport->port.membase + UCR2);
+
+ /* disable the rx errors interrupts */
+ temp = readl(sport->port.membase + UCR4);
+ temp &= ~UCR4_OREN;
+ writel(temp, sport->port.membase + UCR4);
+}
+
static void clear_rx_errors(struct imx_port *sport);
static int start_rx_dma(struct imx_port *sport);
/*
@@ -734,21 +755,8 @@ static void imx_dma_rxint(struct imx_port *sport)
temp = readl(sport->port.membase + USR2);
if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
- sport->dma_is_rxing = 1;
- /* disable the receiver ready and aging timer interrupts */
- temp = readl(sport->port.membase + UCR1);
- temp &= ~(UCR1_RRDYEN);
- writel(temp, sport->port.membase + UCR1);
-
- temp = readl(sport->port.membase + UCR2);
- temp &= ~(UCR2_ATEN);
- writel(temp, sport->port.membase + UCR2);
-
- /* disable the rx errors interrupts */
- temp = readl(sport->port.membase + UCR4);
- temp &= ~UCR4_OREN;
- writel(temp, sport->port.membase + UCR4);
+ imx_disable_rx_int(sport);
/* tell the DMA to receive the data. */
start_rx_dma(sport);
@@ -1317,19 +1325,10 @@ static int imx_startup(struct uart_port *port)
if (!is_imx1_uart(sport)) {
temp = readl(sport->port.membase + UCR3);
- /*
- * The effect of RI and DCD differs depending on the UFCR_DCEDTE
- * bit. In DCE mode they control the outputs, in DTE mode they
- * enable the respective irqs. At least the DCD irq cannot be
- * cleared on i.MX25 at least, so it's not usable and must be
- * disabled. I don't have test hardware to check if RI has the
- * same problem but I consider this likely so it's disabled for
- * now, too.
- */
- temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP |
- UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
+ temp |= UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
if (sport->dte_mode)
+ /* disable broken interrupts */
temp &= ~(UCR3_RI | UCR3_DCD);
writel(temp, sport->port.membase + UCR3);
@@ -1339,6 +1338,33 @@ static int imx_startup(struct uart_port *port)
* Enable modem status interrupts
*/
imx_enable_ms(&sport->port);
+
+ /*
+ * If the serial port is opened for reading start RX DMA immediately
+ * instead of waiting for RX FIFO interrupts. In our iMX53 the average
+ * delay for the first reception dropped from approximately 35000
+ * microseconds to 1000 microseconds.
+ */
+ if (sport->dma_is_enabled) {
+ struct tty_struct *tty = sport->port.state->port.tty;
+ struct tty_file_private *file_priv;
+ int readcnt = 0;
+
+ spin_lock(&tty->files_lock);
+
+ if (!list_empty(&tty->tty_files))
+ list_for_each_entry(file_priv, &tty->tty_files, list)
+ if (!(file_priv->file->f_flags & O_WRONLY))
+ readcnt++;
+
+ spin_unlock(&tty->files_lock);
+
+ if (readcnt > 0) {
+ imx_disable_rx_int(sport);
+ start_rx_dma(sport);
+ }
+ }
+
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;
@@ -1584,8 +1610,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
ufcr = readl(sport->port.membase + UFCR);
ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
- if (sport->dte_mode)
- ufcr |= UFCR_DCEDTE;
writel(ufcr, sport->port.membase + UFCR);
writel(num, sport->port.membase + UBIR);
@@ -2153,6 +2177,27 @@ static int serial_imx_probe(struct platform_device *pdev)
UCR1_TXMPTYEN | UCR1_RTSDEN);
writel_relaxed(reg, sport->port.membase + UCR1);
+ if (!is_imx1_uart(sport) && sport->dte_mode) {
+ /*
+ * The DCEDTE bit changes the direction of DSR, DCD, DTR and RI
+ * and influences if UCR3_RI and UCR3_DCD changes the level of RI
+ * and DCD (when they are outputs) or enables the respective
+ * irqs. So set this bit early, i.e. before requesting irqs.
+ */
+ writel(UFCR_DCEDTE, sport->port.membase + UFCR);
+
+ /*
+ * Disable UCR3_RI and UCR3_DCD irqs. They are also not
+ * enabled later because they cannot be cleared
+ * (confirmed on i.MX25) which makes them unusable.
+ */
+ writel(IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP | UCR3_DSR,
+ sport->port.membase + UCR3);
+
+ } else {
+ writel(0, sport->port.membase + UFCR);
+ }
+
clk_disable_unprepare(sport->clk_ipg);
/*
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index a473464..1ea05ac 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1770,7 +1770,8 @@ static int serial_omap_probe(struct platform_device *pdev)
return 0;
err_add_port:
- pm_runtime_put(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_qos_remove_request(&up->pm_qos_request);
device_init_wakeup(up->dev, false);
@@ -1783,9 +1784,13 @@ static int serial_omap_remove(struct platform_device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(dev);
+ pm_runtime_get_sync(up->dev);
+
+ uart_remove_one_port(&serial_omap_reg, &up->port);
+
+ pm_runtime_dont_use_autosuspend(up->dev);
pm_runtime_put_sync(up->dev);
pm_runtime_disable(up->dev);
- uart_remove_one_port(&serial_omap_reg, &up->port);
pm_qos_remove_request(&up->pm_qos_request);
device_init_wakeup(&dev->dev, false);
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7a17aed..8aca18c 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -859,7 +859,7 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
{
struct s3c24xx_uart_dma *dma = p->dma;
- unsigned long flags;
+ int ret;
/* Default slave configuration parameters */
dma->rx_conf.direction = DMA_DEV_TO_MEM;
@@ -884,8 +884,8 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
dma->tx_chan = dma_request_chan(p->port.dev, "tx");
if (IS_ERR(dma->tx_chan)) {
- dma_release_channel(dma->rx_chan);
- return PTR_ERR(dma->tx_chan);
+ ret = PTR_ERR(dma->tx_chan);
+ goto err_release_rx;
}
dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
@@ -894,26 +894,38 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
dma->rx_size = PAGE_SIZE;
dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL);
-
if (!dma->rx_buf) {
- dma_release_channel(dma->rx_chan);
- dma_release_channel(dma->tx_chan);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_release_tx;
}
- dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
+ dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
dma->rx_size, DMA_FROM_DEVICE);
-
- spin_lock_irqsave(&p->port.lock, flags);
+ if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
+ ret = -EIO;
+ goto err_free_rx;
+ }
/* TX buffer */
- dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
- p->port.state->xmit.buf,
+ dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
UART_XMIT_SIZE, DMA_TO_DEVICE);
-
- spin_unlock_irqrestore(&p->port.lock, flags);
+ if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
+ ret = -EIO;
+ goto err_unmap_rx;
+ }
return 0;
+
+err_unmap_rx:
+ dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size,
+ DMA_FROM_DEVICE);
+err_free_rx:
+ kfree(dma->rx_buf);
+err_release_tx:
+ dma_release_channel(dma->tx_chan);
+err_release_rx:
+ dma_release_channel(dma->rx_chan);
+ return ret;
}
static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
@@ -922,7 +934,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
if (dma->rx_chan) {
dmaengine_terminate_all(dma->rx_chan);
- dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+ dma_unmap_single(p->port.dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
kfree(dma->rx_buf);
dma_release_channel(dma->rx_chan);
@@ -931,7 +943,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
if (dma->tx_chan) {
dmaengine_terminate_all(dma->tx_chan);
- dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
+ dma_unmap_single(p->port.dev, dma->tx_addr,
UART_XMIT_SIZE, DMA_TO_DEVICE);
dma_release_channel(dma->tx_chan);
dma->tx_chan = NULL;
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index 771f361..041625c 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -41,7 +41,7 @@
#include <linux/tty_flip.h>
#include <linux/types.h>
-#include <linux/atomic.h>
+#include <linux/refcount.h>
#include <asm/io.h>
#include <asm/war.h>
@@ -103,7 +103,7 @@ struct sbd_port {
struct sbd_duart {
struct sbd_port sport[2];
unsigned long mapctrl;
- atomic_t map_guard;
+ refcount_t map_guard;
};
#define to_sport(uport) container_of(uport, struct sbd_port, port)
@@ -654,15 +654,13 @@ static void sbd_release_port(struct uart_port *uport)
{
struct sbd_port *sport = to_sport(uport);
struct sbd_duart *duart = sport->duart;
- int map_guard;
iounmap(sport->memctrl);
sport->memctrl = NULL;
iounmap(uport->membase);
uport->membase = NULL;
- map_guard = atomic_add_return(-1, &duart->map_guard);
- if (!map_guard)
+ if(refcount_dec_and_test(&duart->map_guard))
release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING);
release_mem_region(uport->mapbase, DUART_CHANREG_SPACING);
}
@@ -698,7 +696,6 @@ static int sbd_request_port(struct uart_port *uport)
{
const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n";
struct sbd_duart *duart = to_sport(uport)->duart;
- int map_guard;
int ret = 0;
if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING,
@@ -706,11 +703,11 @@ static int sbd_request_port(struct uart_port *uport)
printk(err);
return -EBUSY;
}
- map_guard = atomic_add_return(1, &duart->map_guard);
- if (map_guard == 1) {
+ refcount_inc(&duart->map_guard);
+ if (refcount_read(&duart->map_guard) == 1) {
if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING,
"sb1250-duart")) {
- atomic_add(-1, &duart->map_guard);
+ refcount_dec(&duart->map_guard);
printk(err);
ret = -EBUSY;
}
@@ -718,8 +715,7 @@ static int sbd_request_port(struct uart_port *uport)
if (!ret) {
ret = sbd_map_port(uport);
if (ret) {
- map_guard = atomic_add_return(-1, &duart->map_guard);
- if (!map_guard)
+ if (refcount_dec_and_test(&duart->map_guard))
release_mem_region(duart->mapctrl,
DUART_CHANREG_SPACING);
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 3fe5689..0f45b78 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2117,9 +2117,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
msleep(10);
if (!tries)
- dev_err(uport->dev, "%s%d: Unable to drain transmitter\n",
- drv->dev_name,
- drv->tty_driver->name_base + uport->line);
+ dev_err(uport->dev, "%s: Unable to drain transmitter\n",
+ uport->name);
ops->shutdown(uport);
}
@@ -2248,11 +2247,10 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
break;
}
- printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n",
+ pr_info("%s%s%s at %s (irq = %d, base_baud = %d) is a %s\n",
port->dev ? dev_name(port->dev) : "",
port->dev ? ": " : "",
- drv->dev_name,
- drv->tty_driver->name_base + port->line,
+ port->name,
address, port->irq, port->uartclk / 16, uart_type(port));
}
@@ -2331,9 +2329,6 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
int flow = 'n';
int ret = 0;
- if (!state)
- return -1;
-
tport = &state->port;
mutex_lock(&tport->mutex);
@@ -2368,13 +2363,12 @@ static int uart_poll_get_char(struct tty_driver *driver, int line)
struct uart_port *port;
int ret = -1;
- if (state) {
- port = uart_port_ref(state);
- if (port) {
- ret = port->ops->poll_get_char(port);
- uart_port_deref(port);
- }
+ port = uart_port_ref(state);
+ if (port) {
+ ret = port->ops->poll_get_char(port);
+ uart_port_deref(port);
}
+
return ret;
}
@@ -2384,9 +2378,6 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
struct uart_state *state = drv->state + line;
struct uart_port *port;
- if (!state)
- return;
-
port = uart_port_ref(state);
if (!port)
return;
@@ -2751,6 +2742,12 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
state->pm_state = UART_PM_STATE_UNDEFINED;
uport->cons = drv->cons;
uport->minor = drv->tty_driver->minor_start + uport->line;
+ uport->name = kasprintf(GFP_KERNEL, "%s%d", drv->dev_name,
+ drv->tty_driver->name_base + uport->line);
+ if (!uport->name) {
+ ret = -ENOMEM;
+ goto out;
+ }
/*
* If this port is a console, then the spinlock is already
@@ -2868,6 +2865,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
if (uport->type != PORT_UNKNOWN && uport->ops->release_port)
uport->ops->release_port(uport);
kfree(uport->tty_groups);
+ kfree(uport->name);
/*
* Indicate that there isn't a port here anymore.
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 9a47cc4..71707e8 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -683,24 +683,37 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
}
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 data = serial_port_in(port, SCPDR);
u16 ctrl = serial_port_in(port, SCPCR);
/* Enable RXD and TXD pin functions */
ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC);
if (to_sci_port(port)->has_rtscts) {
- /* RTS# is output, driven 1 */
- ctrl |= SCPCR_RTSC;
- serial_port_out(port, SCPDR,
- serial_port_in(port, SCPDR) | SCPDR_RTSD);
+ /* RTS# is output, active low, unless autorts */
+ if (!(port->mctrl & TIOCM_RTS)) {
+ ctrl |= SCPCR_RTSC;
+ data |= SCPDR_RTSD;
+ } else if (!s->autorts) {
+ ctrl |= SCPCR_RTSC;
+ data &= ~SCPDR_RTSD;
+ } else {
+ /* Enable RTS# pin function */
+ ctrl &= ~SCPCR_RTSC;
+ }
/* Enable CTS# pin function */
ctrl &= ~SCPCR_CTSC;
}
+ serial_port_out(port, SCPDR, data);
serial_port_out(port, SCPCR, ctrl);
} else if (sci_getreg(port, SCSPTR)->size) {
u16 status = serial_port_in(port, SCSPTR);
- /* RTS# is output, driven 1 */
- status |= SCSPTR_RTSIO | SCSPTR_RTSDT;
+ /* RTS# is always output; and active low, unless autorts */
+ status |= SCSPTR_RTSIO;
+ if (!(port->mctrl & TIOCM_RTS))
+ status |= SCSPTR_RTSDT;
+ else if (!s->autorts)
+ status &= ~SCSPTR_RTSDT;
/* CTS# and SCK are inputs */
status &= ~(SCSPTR_CTSIO | SCSPTR_SCKIO);
serial_port_out(port, SCSPTR, status);
@@ -1985,12 +1998,14 @@ static int sci_startup(struct uart_port *port)
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
- ret = sci_request_irq(s);
- if (unlikely(ret < 0))
- return ret;
-
sci_request_dma(port);
+ ret = sci_request_irq(s);
+ if (unlikely(ret < 0)) {
+ sci_free_dma(port);
+ return ret;
+ }
+
return 0;
}
@@ -2021,8 +2036,8 @@ static void sci_shutdown(struct uart_port *port)
}
#endif
- sci_free_dma(port);
sci_free_irq(s);
+ sci_free_dma(port);
}
static int sci_sck_calc(struct sci_port *s, unsigned int bps,
@@ -2157,10 +2172,6 @@ static void sci_reset(struct uart_port *port)
unsigned int status;
struct sci_port *s = to_sci_port(port);
- do {
- status = serial_port_in(port, SCxSR);
- } while (!(status & SCxSR_TEND(port)));
-
serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
reg = sci_getreg(port, SCFCR);
@@ -2374,6 +2385,10 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
serial_port_out(port, SCFCR, ctrl);
}
+ if (port->flags & UPF_HARD_FLOW) {
+ /* Refresh (Auto) RTS */
+ sci_set_mctrl(port, port->mctrl);
+ }
scr_val |= SCSCR_RE | SCSCR_TE |
(s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0));
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index d98e3dc..90996ad 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -36,7 +36,7 @@
#define SPRD_FIFO_SIZE 128
#define SPRD_DEF_RATE 26000000
#define SPRD_BAUD_IO_LIMIT 3000000
-#define SPRD_TIMEOUT 256
+#define SPRD_TIMEOUT 256000
/* the offset of serial registers and BITs for them */
/* data registers */
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index c334bcc..f5335be 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -887,13 +887,12 @@ static void asc_console_write(struct console *co, const char *s, unsigned count)
int locked = 1;
u32 intenable;
- local_irq_save(flags);
if (port->sysrq)
locked = 0; /* asc_interrupt has already claimed the lock */
else if (oops_in_progress)
- locked = spin_trylock(&port->lock);
+ locked = spin_trylock_irqsave(&port->lock, flags);
else
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
/*
* Disable interrupts so we don't get the IRQ line bouncing
@@ -911,14 +910,13 @@ static void asc_console_write(struct console *co, const char *s, unsigned count)
asc_out(port, ASC_INTEN, intenable);
if (locked)
- spin_unlock(&port->lock);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static int asc_console_setup(struct console *co, char *options)
{
struct asc_port *ascport;
- int baud = 9600;
+ int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
@@ -986,7 +984,7 @@ static struct platform_driver asc_serial_driver = {
static int __init asc_init(void)
{
int ret;
- static char banner[] __initdata =
+ static const char banner[] __initconst =
KERN_INFO "STMicroelectronics ASC driver initialized\n";
printk(banner);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 817bb0d..c9b8d70 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -28,7 +28,7 @@
#define ULITE_NAME "ttyUL"
#define ULITE_MAJOR 204
#define ULITE_MINOR 187
-#define ULITE_NR_UARTS 16
+#define ULITE_NR_UARTS CONFIG_SERIAL_UARTLITE_NR_UARTS
/* ---------------------------------------------------------------------
* Register definitions
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index ad77d0e..c053995 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -30,6 +30,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/module.h>
+#include <linux/pm_runtime.h>
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
@@ -176,6 +177,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
#define CDNS_UART_BDIV_MIN 4
#define CDNS_UART_BDIV_MAX 255
#define CDNS_UART_CD_MAX 65535
+#define UART_AUTOSUSPEND_TIMEOUT 3000
/**
* struct cdns_uart - device data
@@ -1065,16 +1067,13 @@ static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
static void cdns_uart_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- struct cdns_uart *cdns_uart = port->private_data;
-
switch (state) {
case UART_PM_STATE_OFF:
- clk_disable(cdns_uart->uartclk);
- clk_disable(cdns_uart->pclk);
+ pm_runtime_mark_last_busy(port->dev);
+ pm_runtime_put_autosuspend(port->dev);
break;
default:
- clk_enable(cdns_uart->pclk);
- clk_enable(cdns_uart->uartclk);
+ pm_runtime_get_sync(port->dev);
break;
}
}
@@ -1353,12 +1352,7 @@ static int cdns_uart_suspend(struct device *device)
* the suspend.
*/
uart_suspend_port(&cdns_uart_uart_driver, port);
- if (console_suspend_enabled && !may_wake) {
- struct cdns_uart *cdns_uart = port->private_data;
-
- clk_disable(cdns_uart->uartclk);
- clk_disable(cdns_uart->pclk);
- } else {
+ if (!(console_suspend_enabled && !may_wake)) {
unsigned long flags = 0;
spin_lock_irqsave(&port->lock, flags);
@@ -1423,6 +1417,8 @@ static int cdns_uart_resume(struct device *device)
ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
writel(ctrl_reg, port->membase + CDNS_UART_CR);
+ clk_disable(cdns_uart->uartclk);
+ clk_disable(cdns_uart->pclk);
spin_unlock_irqrestore(&port->lock, flags);
} else {
spin_lock_irqsave(&port->lock, flags);
@@ -1436,9 +1432,33 @@ static int cdns_uart_resume(struct device *device)
return uart_resume_port(&cdns_uart_uart_driver, port);
}
#endif /* ! CONFIG_PM_SLEEP */
+static int __maybe_unused cdns_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct cdns_uart *cdns_uart = port->private_data;
-static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend,
- cdns_uart_resume);
+ clk_disable(cdns_uart->uartclk);
+ clk_disable(cdns_uart->pclk);
+ return 0;
+};
+
+static int __maybe_unused cdns_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct cdns_uart *cdns_uart = port->private_data;
+
+ clk_enable(cdns_uart->pclk);
+ clk_enable(cdns_uart->uartclk);
+ return 0;
+};
+
+static const struct dev_pm_ops cdns_uart_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume)
+ SET_RUNTIME_PM_OPS(cdns_runtime_suspend,
+ cdns_runtime_resume, NULL)
+};
static const struct cdns_platform_data zynqmp_uart_def = {
.quirks = CDNS_UART_RXBS_SUPPORT, };
@@ -1501,12 +1521,12 @@ static int cdns_uart_probe(struct platform_device *pdev)
return PTR_ERR(cdns_uart_data->uartclk);
}
- rc = clk_prepare(cdns_uart_data->pclk);
+ rc = clk_prepare_enable(cdns_uart_data->pclk);
if (rc) {
dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
return rc;
}
- rc = clk_prepare(cdns_uart_data->uartclk);
+ rc = clk_prepare_enable(cdns_uart_data->uartclk);
if (rc) {
dev_err(&pdev->dev, "Unable to enable device clock.\n");
goto err_out_clk_dis_pclk;
@@ -1558,6 +1578,11 @@ static int cdns_uart_probe(struct platform_device *pdev)
cdns_uart_data->port = port;
platform_set_drvdata(pdev, port);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
@@ -1573,9 +1598,12 @@ static int cdns_uart_probe(struct platform_device *pdev)
&cdns_uart_data->clk_rate_change_nb);
#endif
err_out_clk_disable:
- clk_unprepare(cdns_uart_data->uartclk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ clk_disable_unprepare(cdns_uart_data->uartclk);
err_out_clk_dis_pclk:
- clk_unprepare(cdns_uart_data->pclk);
+ clk_disable_unprepare(cdns_uart_data->pclk);
return rc;
}
@@ -1599,8 +1627,11 @@ static int cdns_uart_remove(struct platform_device *pdev)
#endif
rc = uart_remove_one_port(&cdns_uart_uart_driver, port);
port->mapbase = 0;
- clk_unprepare(cdns_uart_data->uartclk);
- clk_unprepare(cdns_uart_data->pclk);
+ clk_disable_unprepare(cdns_uart_data->uartclk);
+ clk_disable_unprepare(cdns_uart_data->pclk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
return rc;
}
diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c
new file mode 100644
index 0000000..5c33fd2
--- /dev/null
+++ b/drivers/tty/tty_baudrate.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/export.h>
+
+
+/*
+ * Routine which returns the baud rate of the tty
+ *
+ * Note that the baud_table needs to be kept in sync with the
+ * include/asm/termbits.h file.
+ */
+static const speed_t baud_table[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+ 9600, 19200, 38400, 57600, 115200, 230400, 460800,
+#ifdef __sparc__
+ 76800, 153600, 307200, 614400, 921600
+#else
+ 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
+ 2500000, 3000000, 3500000, 4000000
+#endif
+};
+
+#ifndef __sparc__
+static const tcflag_t baud_bits[] = {
+ B0, B50, B75, B110, B134, B150, B200, B300, B600,
+ B1200, B1800, B2400, B4800, B9600, B19200, B38400,
+ B57600, B115200, B230400, B460800, B500000, B576000,
+ B921600, B1000000, B1152000, B1500000, B2000000, B2500000,
+ B3000000, B3500000, B4000000
+};
+#else
+static const tcflag_t baud_bits[] = {
+ B0, B50, B75, B110, B134, B150, B200, B300, B600,
+ B1200, B1800, B2400, B4800, B9600, B19200, B38400,
+ B57600, B115200, B230400, B460800, B76800, B153600,
+ B307200, B614400, B921600
+};
+#endif
+
+static int n_baud_table = ARRAY_SIZE(baud_table);
+
+/**
+ * tty_termios_baud_rate
+ * @termios: termios structure
+ *
+ * Convert termios baud rate data into a speed. This should be called
+ * with the termios lock held if this termios is a terminal termios
+ * structure. May change the termios data. Device drivers can call this
+ * function but should use ->c_[io]speed directly as they are updated.
+ *
+ * Locking: none
+ */
+
+speed_t tty_termios_baud_rate(struct ktermios *termios)
+{
+ unsigned int cbaud;
+
+ cbaud = termios->c_cflag & CBAUD;
+
+#ifdef BOTHER
+ /* Magic token for arbitrary speed via c_ispeed/c_ospeed */
+ if (cbaud == BOTHER)
+ return termios->c_ospeed;
+#endif
+ if (cbaud & CBAUDEX) {
+ cbaud &= ~CBAUDEX;
+
+ if (cbaud < 1 || cbaud + 15 > n_baud_table)
+ termios->c_cflag &= ~CBAUDEX;
+ else
+ cbaud += 15;
+ }
+ return baud_table[cbaud];
+}
+EXPORT_SYMBOL(tty_termios_baud_rate);
+
+/**
+ * tty_termios_input_baud_rate
+ * @termios: termios structure
+ *
+ * Convert termios baud rate data into a speed. This should be called
+ * with the termios lock held if this termios is a terminal termios
+ * structure. May change the termios data. Device drivers can call this
+ * function but should use ->c_[io]speed directly as they are updated.
+ *
+ * Locking: none
+ */
+
+speed_t tty_termios_input_baud_rate(struct ktermios *termios)
+{
+#ifdef IBSHIFT
+ unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD;
+
+ if (cbaud == B0)
+ return tty_termios_baud_rate(termios);
+
+ /* Magic token for arbitrary speed via c_ispeed*/
+ if (cbaud == BOTHER)
+ return termios->c_ispeed;
+
+ if (cbaud & CBAUDEX) {
+ cbaud &= ~CBAUDEX;
+
+ if (cbaud < 1 || cbaud + 15 > n_baud_table)
+ termios->c_cflag &= ~(CBAUDEX << IBSHIFT);
+ else
+ cbaud += 15;
+ }
+ return baud_table[cbaud];
+#else
+ return tty_termios_baud_rate(termios);
+#endif
+}
+EXPORT_SYMBOL(tty_termios_input_baud_rate);
+
+/**
+ * tty_termios_encode_baud_rate
+ * @termios: ktermios structure holding user requested state
+ * @ispeed: input speed
+ * @ospeed: output speed
+ *
+ * Encode the speeds set into the passed termios structure. This is
+ * used as a library helper for drivers so that they can report back
+ * the actual speed selected when it differs from the speed requested
+ *
+ * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
+ * we need to carefully set the bits when the user does not get the
+ * desired speed. We allow small margins and preserve as much of possible
+ * of the input intent to keep compatibility.
+ *
+ * Locking: Caller should hold termios lock. This is already held
+ * when calling this function from the driver termios handler.
+ *
+ * The ifdefs deal with platforms whose owners have yet to update them
+ * and will all go away once this is done.
+ */
+
+void tty_termios_encode_baud_rate(struct ktermios *termios,
+ speed_t ibaud, speed_t obaud)
+{
+ int i = 0;
+ int ifound = -1, ofound = -1;
+ int iclose = ibaud/50, oclose = obaud/50;
+ int ibinput = 0;
+
+ if (obaud == 0) /* CD dropped */
+ ibaud = 0; /* Clear ibaud to be sure */
+
+ termios->c_ispeed = ibaud;
+ termios->c_ospeed = obaud;
+
+#ifdef BOTHER
+ /* If the user asked for a precise weird speed give a precise weird
+ answer. If they asked for a Bfoo speed they may have problems
+ digesting non-exact replies so fuzz a bit */
+
+ if ((termios->c_cflag & CBAUD) == BOTHER)
+ oclose = 0;
+ if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER)
+ iclose = 0;
+ if ((termios->c_cflag >> IBSHIFT) & CBAUD)
+ ibinput = 1; /* An input speed was specified */
+#endif
+ termios->c_cflag &= ~CBAUD;
+
+ /*
+ * Our goal is to find a close match to the standard baud rate
+ * returned. Walk the baud rate table and if we get a very close
+ * match then report back the speed as a POSIX Bxxxx value by
+ * preference
+ */
+
+ do {
+ if (obaud - oclose <= baud_table[i] &&
+ obaud + oclose >= baud_table[i]) {
+ termios->c_cflag |= baud_bits[i];
+ ofound = i;
+ }
+ if (ibaud - iclose <= baud_table[i] &&
+ ibaud + iclose >= baud_table[i]) {
+ /* For the case input == output don't set IBAUD bits
+ if the user didn't do so */
+ if (ofound == i && !ibinput)
+ ifound = i;
+#ifdef IBSHIFT
+ else {
+ ifound = i;
+ termios->c_cflag |= (baud_bits[i] << IBSHIFT);
+ }
+#endif
+ }
+ } while (++i < n_baud_table);
+
+ /*
+ * If we found no match then use BOTHER if provided or warn
+ * the user their platform maintainer needs to wake up if not.
+ */
+#ifdef BOTHER
+ if (ofound == -1)
+ termios->c_cflag |= BOTHER;
+ /* Set exact input bits only if the input and output differ or the
+ user already did */
+ if (ifound == -1 && (ibaud != obaud || ibinput))
+ termios->c_cflag |= (BOTHER << IBSHIFT);
+#else
+ if (ifound == -1 || ofound == -1)
+ pr_warn_once("tty: Unable to return correct speed data as your architecture needs updating.\n");
+#endif
+}
+EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
+
+/**
+ * tty_encode_baud_rate - set baud rate of the tty
+ * @ibaud: input baud rate
+ * @obad: output baud rate
+ *
+ * Update the current termios data for the tty with the new speed
+ * settings. The caller must hold the termios_rwsem for the tty in
+ * question.
+ */
+
+void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
+{
+ tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud);
+}
+EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 309d250..0c150b5 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -377,65 +377,6 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
EXPORT_SYMBOL_GPL(tty_find_polling_driver);
#endif
-static int is_ignored(int sig)
-{
- return (sigismember(¤t->blocked, sig) ||
- current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
-}
-
-/**
- * tty_check_change - check for POSIX terminal changes
- * @tty: tty to check
- *
- * If we try to write to, or set the state of, a terminal and we're
- * not in the foreground, send a SIGTTOU. If the signal is blocked or
- * ignored, go ahead and perform the operation. (POSIX 7.2)
- *
- * Locking: ctrl_lock
- */
-
-int __tty_check_change(struct tty_struct *tty, int sig)
-{
- unsigned long flags;
- struct pid *pgrp, *tty_pgrp;
- int ret = 0;
-
- if (current->signal->tty != tty)
- return 0;
-
- rcu_read_lock();
- pgrp = task_pgrp(current);
-
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- tty_pgrp = tty->pgrp;
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-
- if (tty_pgrp && pgrp != tty->pgrp) {
- if (is_ignored(sig)) {
- if (sig == SIGTTIN)
- ret = -EIO;
- } else if (is_current_pgrp_orphaned())
- ret = -EIO;
- else {
- kill_pgrp(pgrp, sig, 1);
- set_thread_flag(TIF_SIGPENDING);
- ret = -ERESTARTSYS;
- }
- }
- rcu_read_unlock();
-
- if (!tty_pgrp)
- tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig);
-
- return ret;
-}
-
-int tty_check_change(struct tty_struct *tty)
-{
- return __tty_check_change(tty, SIGTTOU);
-}
-EXPORT_SYMBOL(tty_check_change);
-
static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
@@ -509,79 +450,6 @@ static const struct file_operations hung_up_tty_fops = {
static DEFINE_SPINLOCK(redirect_lock);
static struct file *redirect;
-
-void proc_clear_tty(struct task_struct *p)
-{
- unsigned long flags;
- struct tty_struct *tty;
- spin_lock_irqsave(&p->sighand->siglock, flags);
- tty = p->signal->tty;
- p->signal->tty = NULL;
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
- tty_kref_put(tty);
-}
-
-/**
- * proc_set_tty - set the controlling terminal
- *
- * Only callable by the session leader and only if it does not already have
- * a controlling terminal.
- *
- * Caller must hold: tty_lock()
- * a readlock on tasklist_lock
- * sighand lock
- */
-static void __proc_set_tty(struct tty_struct *tty)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- /*
- * The session and fg pgrp references will be non-NULL if
- * tiocsctty() is stealing the controlling tty
- */
- put_pid(tty->session);
- put_pid(tty->pgrp);
- tty->pgrp = get_pid(task_pgrp(current));
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- tty->session = get_pid(task_session(current));
- if (current->signal->tty) {
- tty_debug(tty, "current tty %s not NULL!!\n",
- current->signal->tty->name);
- tty_kref_put(current->signal->tty);
- }
- put_pid(current->signal->tty_old_pgrp);
- current->signal->tty = tty_kref_get(tty);
- current->signal->tty_old_pgrp = NULL;
-}
-
-static void proc_set_tty(struct tty_struct *tty)
-{
- spin_lock_irq(¤t->sighand->siglock);
- __proc_set_tty(tty);
- spin_unlock_irq(¤t->sighand->siglock);
-}
-
-struct tty_struct *get_current_tty(void)
-{
- struct tty_struct *tty;
- unsigned long flags;
-
- spin_lock_irqsave(¤t->sighand->siglock, flags);
- tty = tty_kref_get(current->signal->tty);
- spin_unlock_irqrestore(¤t->sighand->siglock, flags);
- return tty;
-}
-EXPORT_SYMBOL_GPL(get_current_tty);
-
-static void session_clear_tty(struct pid *session)
-{
- struct task_struct *p;
- do_each_pid_task(session, PIDTYPE_SID, p) {
- proc_clear_tty(p);
- } while_each_pid_task(session, PIDTYPE_SID, p);
-}
-
/**
* tty_wakeup - request more data
* @tty: terminal
@@ -609,60 +477,6 @@ void tty_wakeup(struct tty_struct *tty)
EXPORT_SYMBOL_GPL(tty_wakeup);
/**
- * tty_signal_session_leader - sends SIGHUP to session leader
- * @tty controlling tty
- * @exit_session if non-zero, signal all foreground group processes
- *
- * Send SIGHUP and SIGCONT to the session leader and its process group.
- * Optionally, signal all processes in the foreground process group.
- *
- * Returns the number of processes in the session with this tty
- * as their controlling terminal. This value is used to drop
- * tty references for those processes.
- */
-static int tty_signal_session_leader(struct tty_struct *tty, int exit_session)
-{
- struct task_struct *p;
- int refs = 0;
- struct pid *tty_pgrp = NULL;
-
- read_lock(&tasklist_lock);
- if (tty->session) {
- do_each_pid_task(tty->session, PIDTYPE_SID, p) {
- spin_lock_irq(&p->sighand->siglock);
- if (p->signal->tty == tty) {
- p->signal->tty = NULL;
- /* We defer the dereferences outside fo
- the tasklist lock */
- refs++;
- }
- if (!p->signal->leader) {
- spin_unlock_irq(&p->sighand->siglock);
- continue;
- }
- __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
- __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
- put_pid(p->signal->tty_old_pgrp); /* A noop */
- spin_lock(&tty->ctrl_lock);
- tty_pgrp = get_pid(tty->pgrp);
- if (tty->pgrp)
- p->signal->tty_old_pgrp = get_pid(tty->pgrp);
- spin_unlock(&tty->ctrl_lock);
- spin_unlock_irq(&p->sighand->siglock);
- } while_each_pid_task(tty->session, PIDTYPE_SID, p);
- }
- read_unlock(&tasklist_lock);
-
- if (tty_pgrp) {
- if (exit_session)
- kill_pgrp(tty_pgrp, SIGHUP, exit_session);
- put_pid(tty_pgrp);
- }
-
- return refs;
-}
-
-/**
* __tty_hangup - actual handler for hangup events
* @work: tty device
*
@@ -840,7 +654,7 @@ void tty_vhangup_self(void)
* is complete. That guarantee is necessary for security reasons.
*/
-static void tty_vhangup_session(struct tty_struct *tty)
+void tty_vhangup_session(struct tty_struct *tty)
{
tty_debug_hangup(tty, "session hangup\n");
__tty_hangup(tty, 1);
@@ -862,106 +676,6 @@ int tty_hung_up_p(struct file *filp)
EXPORT_SYMBOL(tty_hung_up_p);
/**
- * disassociate_ctty - disconnect controlling tty
- * @on_exit: true if exiting so need to "hang up" the session
- *
- * This function is typically called only by the session leader, when
- * it wants to disassociate itself from its controlling tty.
- *
- * It performs the following functions:
- * (1) Sends a SIGHUP and SIGCONT to the foreground process group
- * (2) Clears the tty from being controlling the session
- * (3) Clears the controlling tty for all processes in the
- * session group.
- *
- * The argument on_exit is set to 1 if called when a process is
- * exiting; it is 0 if called by the ioctl TIOCNOTTY.
- *
- * Locking:
- * BTM is taken for hysterical raisins, and held when
- * called from no_tty().
- * tty_mutex is taken to protect tty
- * ->siglock is taken to protect ->signal/->sighand
- * tasklist_lock is taken to walk process list for sessions
- * ->siglock is taken to protect ->signal/->sighand
- */
-
-void disassociate_ctty(int on_exit)
-{
- struct tty_struct *tty;
-
- if (!current->signal->leader)
- return;
-
- tty = get_current_tty();
- if (tty) {
- if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) {
- tty_vhangup_session(tty);
- } else {
- struct pid *tty_pgrp = tty_get_pgrp(tty);
- if (tty_pgrp) {
- kill_pgrp(tty_pgrp, SIGHUP, on_exit);
- if (!on_exit)
- kill_pgrp(tty_pgrp, SIGCONT, on_exit);
- put_pid(tty_pgrp);
- }
- }
- tty_kref_put(tty);
-
- } else if (on_exit) {
- struct pid *old_pgrp;
- spin_lock_irq(¤t->sighand->siglock);
- old_pgrp = current->signal->tty_old_pgrp;
- current->signal->tty_old_pgrp = NULL;
- spin_unlock_irq(¤t->sighand->siglock);
- if (old_pgrp) {
- kill_pgrp(old_pgrp, SIGHUP, on_exit);
- kill_pgrp(old_pgrp, SIGCONT, on_exit);
- put_pid(old_pgrp);
- }
- return;
- }
-
- spin_lock_irq(¤t->sighand->siglock);
- put_pid(current->signal->tty_old_pgrp);
- current->signal->tty_old_pgrp = NULL;
-
- tty = tty_kref_get(current->signal->tty);
- if (tty) {
- unsigned long flags;
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- put_pid(tty->session);
- put_pid(tty->pgrp);
- tty->session = NULL;
- tty->pgrp = NULL;
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- tty_kref_put(tty);
- } else
- tty_debug_hangup(tty, "no current tty\n");
-
- spin_unlock_irq(¤t->sighand->siglock);
- /* Now clear signal->tty under the lock */
- read_lock(&tasklist_lock);
- session_clear_tty(task_session(current));
- read_unlock(&tasklist_lock);
-}
-
-/**
- *
- * no_tty - Ensure the current process does not have a controlling tty
- */
-void no_tty(void)
-{
- /* FIXME: Review locking here. The tty_lock never covered any race
- between a new association and proc_clear_tty but possible we need
- to protect against this anyway */
- struct task_struct *tsk = current;
- disassociate_ctty(0);
- proc_clear_tty(tsk);
-}
-
-
-/**
* stop_tty - propagate flow control
* @tty: tty to stop
*
@@ -1520,7 +1234,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
* This code guarantees that either everything succeeds and the
* TTY is ready for operation, or else the table slots are vacated
* and the allocated memory released. (Except that the termios
- * and locked termios may be retained.)
+ * may be retained.)
*/
if (!try_module_get(driver->owner))
@@ -2163,38 +1877,13 @@ static int tty_open(struct inode *inode, struct file *filp)
}
clear_bit(TTY_HUPPED, &tty->flags);
-
- read_lock(&tasklist_lock);
- spin_lock_irq(¤t->sighand->siglock);
noctty = (filp->f_flags & O_NOCTTY) ||
- (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) ||
- device == MKDEV(TTYAUX_MAJOR, 1) ||
- (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
- tty->driver->subtype == PTY_TYPE_MASTER);
-
- if (!noctty &&
- current->signal->leader &&
- !current->signal->tty &&
- tty->session == NULL) {
- /*
- * Don't let a process that only has write access to the tty
- * obtain the privileges associated with having a tty as
- * controlling terminal (being able to reopen it with full
- * access through /dev/tty, being able to perform pushback).
- * Many distributions set the group of all ttys to "tty" and
- * grant write-only access to all terminals for setgid tty
- * binaries, which should not imply full privileges on all ttys.
- *
- * This could theoretically break old code that performs open()
- * on a write-only file descriptor. In that case, it might be
- * necessary to also permit this if
- * inode_permission(inode, MAY_READ) == 0.
- */
- if (filp->f_mode & FMODE_READ)
- __proc_set_tty(tty);
- }
- spin_unlock_irq(¤t->sighand->siglock);
- read_unlock(&tasklist_lock);
+ (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) ||
+ device == MKDEV(TTYAUX_MAJOR, 1) ||
+ (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+ tty->driver->subtype == PTY_TYPE_MASTER);
+ if (!noctty)
+ tty_open_proc_set_tty(filp, tty);
tty_unlock(tty);
return 0;
}
@@ -2457,211 +2146,6 @@ static int fionbio(struct file *file, int __user *p)
}
/**
- * tiocsctty - set controlling tty
- * @tty: tty structure
- * @arg: user argument
- *
- * This ioctl is used to manage job control. It permits a session
- * leader to set this tty as the controlling tty for the session.
- *
- * Locking:
- * Takes tty_lock() to serialize proc_set_tty() for this tty
- * Takes tasklist_lock internally to walk sessions
- * Takes ->siglock() when updating signal->tty
- */
-
-static int tiocsctty(struct tty_struct *tty, struct file *file, int arg)
-{
- int ret = 0;
-
- tty_lock(tty);
- read_lock(&tasklist_lock);
-
- if (current->signal->leader && (task_session(current) == tty->session))
- goto unlock;
-
- /*
- * The process must be a session leader and
- * not have a controlling tty already.
- */
- if (!current->signal->leader || current->signal->tty) {
- ret = -EPERM;
- goto unlock;
- }
-
- if (tty->session) {
- /*
- * This tty is already the controlling
- * tty for another session group!
- */
- if (arg == 1 && capable(CAP_SYS_ADMIN)) {
- /*
- * Steal it away
- */
- session_clear_tty(tty->session);
- } else {
- ret = -EPERM;
- goto unlock;
- }
- }
-
- /* See the comment in tty_open(). */
- if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) {
- ret = -EPERM;
- goto unlock;
- }
-
- proc_set_tty(tty);
-unlock:
- read_unlock(&tasklist_lock);
- tty_unlock(tty);
- return ret;
-}
-
-/**
- * tty_get_pgrp - return a ref counted pgrp pid
- * @tty: tty to read
- *
- * Returns a refcounted instance of the pid struct for the process
- * group controlling the tty.
- */
-
-struct pid *tty_get_pgrp(struct tty_struct *tty)
-{
- unsigned long flags;
- struct pid *pgrp;
-
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- pgrp = get_pid(tty->pgrp);
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-
- return pgrp;
-}
-EXPORT_SYMBOL_GPL(tty_get_pgrp);
-
-/*
- * This checks not only the pgrp, but falls back on the pid if no
- * satisfactory pgrp is found. I dunno - gdb doesn't work correctly
- * without this...
- *
- * The caller must hold rcu lock or the tasklist lock.
- */
-static struct pid *session_of_pgrp(struct pid *pgrp)
-{
- struct task_struct *p;
- struct pid *sid = NULL;
-
- p = pid_task(pgrp, PIDTYPE_PGID);
- if (p == NULL)
- p = pid_task(pgrp, PIDTYPE_PID);
- if (p != NULL)
- sid = task_session(p);
-
- return sid;
-}
-
-/**
- * tiocgpgrp - get process group
- * @tty: tty passed by user
- * @real_tty: tty side of the tty passed by the user if a pty else the tty
- * @p: returned pid
- *
- * Obtain the process group of the tty. If there is no process group
- * return an error.
- *
- * Locking: none. Reference to current->signal->tty is safe.
- */
-
-static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
-{
- struct pid *pid;
- int ret;
- /*
- * (tty == real_tty) is a cheap way of
- * testing if the tty is NOT a master pty.
- */
- if (tty == real_tty && current->signal->tty != real_tty)
- return -ENOTTY;
- pid = tty_get_pgrp(real_tty);
- ret = put_user(pid_vnr(pid), p);
- put_pid(pid);
- return ret;
-}
-
-/**
- * tiocspgrp - attempt to set process group
- * @tty: tty passed by user
- * @real_tty: tty side device matching tty passed by user
- * @p: pid pointer
- *
- * Set the process group of the tty to the session passed. Only
- * permitted where the tty session is our session.
- *
- * Locking: RCU, ctrl lock
- */
-
-static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
-{
- struct pid *pgrp;
- pid_t pgrp_nr;
- int retval = tty_check_change(real_tty);
-
- if (retval == -EIO)
- return -ENOTTY;
- if (retval)
- return retval;
- if (!current->signal->tty ||
- (current->signal->tty != real_tty) ||
- (real_tty->session != task_session(current)))
- return -ENOTTY;
- if (get_user(pgrp_nr, p))
- return -EFAULT;
- if (pgrp_nr < 0)
- return -EINVAL;
- rcu_read_lock();
- pgrp = find_vpid(pgrp_nr);
- retval = -ESRCH;
- if (!pgrp)
- goto out_unlock;
- retval = -EPERM;
- if (session_of_pgrp(pgrp) != task_session(current))
- goto out_unlock;
- retval = 0;
- spin_lock_irq(&tty->ctrl_lock);
- put_pid(real_tty->pgrp);
- real_tty->pgrp = get_pid(pgrp);
- spin_unlock_irq(&tty->ctrl_lock);
-out_unlock:
- rcu_read_unlock();
- return retval;
-}
-
-/**
- * tiocgsid - get session id
- * @tty: tty passed by user
- * @real_tty: tty side of the tty passed by the user if a pty else the tty
- * @p: pointer to returned session id
- *
- * Obtain the session id of the tty. If there is no session
- * return an error.
- *
- * Locking: none. Reference to current->signal->tty is safe.
- */
-
-static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
-{
- /*
- * (tty == real_tty) is a cheap way of
- * testing if the tty is NOT a master pty.
- */
- if (tty == real_tty && current->signal->tty != real_tty)
- return -ENOTTY;
- if (!real_tty->session)
- return -ENOTTY;
- return put_user(pid_vnr(real_tty->session), p);
-}
-
-/**
* tiocsetd - set line discipline
* @tty: tty device
* @p: pointer to user data
@@ -2843,8 +2327,8 @@ static void tty_warn_deprecated_flags(struct serial_struct __user *ss)
flags &= ASYNC_DEPRECATED;
if (flags && __ratelimit(&depr_flags))
- pr_warning("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n",
- __func__, get_task_comm(comm, current), flags);
+ pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n",
+ __func__, get_task_comm(comm, current), flags);
}
/*
@@ -2920,19 +2404,6 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
return put_user(excl, (int __user *)p);
}
- case TIOCNOTTY:
- if (current->signal->tty != tty)
- return -ENOTTY;
- no_tty();
- return 0;
- case TIOCSCTTY:
- return tiocsctty(real_tty, file, arg);
- case TIOCGPGRP:
- return tiocgpgrp(tty, real_tty, p);
- case TIOCSPGRP:
- return tiocspgrp(tty, real_tty, p);
- case TIOCGSID:
- return tiocgsid(tty, real_tty, p);
case TIOCGETD:
return tiocgetd(tty, p);
case TIOCSETD:
@@ -2993,6 +2464,10 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case TIOCSSERIAL:
tty_warn_deprecated_flags(p);
break;
+ default:
+ retval = tty_jobctrl_ioctl(tty, real_tty, file, cmd, arg);
+ if (retval != -ENOIOCTLCMD)
+ return retval;
}
if (tty->ops->ioctl) {
retval = tty->ops->ioctl(tty, cmd, arg);
@@ -3293,9 +2768,9 @@ struct device *tty_register_device_attr(struct tty_driver *driver,
{
char name[64];
dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
- struct device *dev = NULL;
- int retval = -ENODEV;
- bool cdev = false;
+ struct ktermios *tp;
+ struct device *dev;
+ int retval;
if (index >= driver->num) {
pr_err("%s: Attempt to register invalid tty line number (%d)\n",
@@ -3308,18 +2783,9 @@ struct device *tty_register_device_attr(struct tty_driver *driver,
else
tty_line_name(driver, index, name);
- if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
- retval = tty_cdev_add(driver, devt, index, 1);
- if (retval)
- goto error;
- cdev = true;
- }
-
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev) {
- retval = -ENOMEM;
- goto error;
- }
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
dev->devt = devt;
dev->class = tty_class;
@@ -3329,18 +2795,38 @@ struct device *tty_register_device_attr(struct tty_driver *driver,
dev->groups = attr_grp;
dev_set_drvdata(dev, drvdata);
+ dev_set_uevent_suppress(dev, 1);
+
retval = device_register(dev);
if (retval)
- goto error;
+ goto err_put;
+
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
+ /*
+ * Free any saved termios data so that the termios state is
+ * reset when reusing a minor number.
+ */
+ tp = driver->termios[index];
+ if (tp) {
+ driver->termios[index] = NULL;
+ kfree(tp);
+ }
+
+ retval = tty_cdev_add(driver, devt, index, 1);
+ if (retval)
+ goto err_del;
+ }
+
+ dev_set_uevent_suppress(dev, 0);
+ kobject_uevent(&dev->kobj, KOBJ_ADD);
return dev;
-error:
+err_del:
+ device_del(dev);
+err_put:
put_device(dev);
- if (cdev) {
- cdev_del(driver->cdevs[index]);
- driver->cdevs[index] = NULL;
- }
+
return ERR_PTR(retval);
}
EXPORT_SYMBOL_GPL(tty_register_device_attr);
@@ -3441,11 +2927,6 @@ static void destruct_tty_driver(struct kref *kref)
struct ktermios *tp;
if (driver->flags & TTY_DRIVER_INSTALLED) {
- /*
- * Free the termios and termios_locked structures because
- * we don't want to get memory leaks when modular tty
- * drivers are removed from the kernel.
- */
for (i = 0; i < driver->num; i++) {
tp = driver->termios[i];
if (tp) {
@@ -3578,30 +3059,6 @@ void tty_default_fops(struct file_operations *fops)
*fops = tty_fops;
}
-/*
- * Initialize the console device. This is called *early*, so
- * we can't necessarily depend on lots of kernel help here.
- * Just do some early initializations, and do the complex setup
- * later.
- */
-void __init console_init(void)
-{
- initcall_t *call;
-
- /* Setup the default TTY line discipline. */
- n_tty_init();
-
- /*
- * set up the console device so that later boot sequences can
- * inform about problems etc..
- */
- call = __con_initcall_start;
- while (call < __con_initcall_end) {
- (*call)();
- call++;
- }
-}
-
static char *tty_devnode(struct device *dev, umode_t *mode)
{
if (!mode)
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index a9a9787..efa96e6 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -258,228 +258,6 @@ static void unset_locked_termios(struct tty_struct *tty, struct ktermios *old)
/* FIXME: What should we do for i/ospeed */
}
-/*
- * Routine which returns the baud rate of the tty
- *
- * Note that the baud_table needs to be kept in sync with the
- * include/asm/termbits.h file.
- */
-static const speed_t baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800,
-#ifdef __sparc__
- 76800, 153600, 307200, 614400, 921600
-#else
- 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
- 2500000, 3000000, 3500000, 4000000
-#endif
-};
-
-#ifndef __sparc__
-static const tcflag_t baud_bits[] = {
- B0, B50, B75, B110, B134, B150, B200, B300, B600,
- B1200, B1800, B2400, B4800, B9600, B19200, B38400,
- B57600, B115200, B230400, B460800, B500000, B576000,
- B921600, B1000000, B1152000, B1500000, B2000000, B2500000,
- B3000000, B3500000, B4000000
-};
-#else
-static const tcflag_t baud_bits[] = {
- B0, B50, B75, B110, B134, B150, B200, B300, B600,
- B1200, B1800, B2400, B4800, B9600, B19200, B38400,
- B57600, B115200, B230400, B460800, B76800, B153600,
- B307200, B614400, B921600
-};
-#endif
-
-static int n_baud_table = ARRAY_SIZE(baud_table);
-
-/**
- * tty_termios_baud_rate
- * @termios: termios structure
- *
- * Convert termios baud rate data into a speed. This should be called
- * with the termios lock held if this termios is a terminal termios
- * structure. May change the termios data. Device drivers can call this
- * function but should use ->c_[io]speed directly as they are updated.
- *
- * Locking: none
- */
-
-speed_t tty_termios_baud_rate(struct ktermios *termios)
-{
- unsigned int cbaud;
-
- cbaud = termios->c_cflag & CBAUD;
-
-#ifdef BOTHER
- /* Magic token for arbitrary speed via c_ispeed/c_ospeed */
- if (cbaud == BOTHER)
- return termios->c_ospeed;
-#endif
- if (cbaud & CBAUDEX) {
- cbaud &= ~CBAUDEX;
-
- if (cbaud < 1 || cbaud + 15 > n_baud_table)
- termios->c_cflag &= ~CBAUDEX;
- else
- cbaud += 15;
- }
- return baud_table[cbaud];
-}
-EXPORT_SYMBOL(tty_termios_baud_rate);
-
-/**
- * tty_termios_input_baud_rate
- * @termios: termios structure
- *
- * Convert termios baud rate data into a speed. This should be called
- * with the termios lock held if this termios is a terminal termios
- * structure. May change the termios data. Device drivers can call this
- * function but should use ->c_[io]speed directly as they are updated.
- *
- * Locking: none
- */
-
-speed_t tty_termios_input_baud_rate(struct ktermios *termios)
-{
-#ifdef IBSHIFT
- unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD;
-
- if (cbaud == B0)
- return tty_termios_baud_rate(termios);
-
- /* Magic token for arbitrary speed via c_ispeed*/
- if (cbaud == BOTHER)
- return termios->c_ispeed;
-
- if (cbaud & CBAUDEX) {
- cbaud &= ~CBAUDEX;
-
- if (cbaud < 1 || cbaud + 15 > n_baud_table)
- termios->c_cflag &= ~(CBAUDEX << IBSHIFT);
- else
- cbaud += 15;
- }
- return baud_table[cbaud];
-#else
- return tty_termios_baud_rate(termios);
-#endif
-}
-EXPORT_SYMBOL(tty_termios_input_baud_rate);
-
-/**
- * tty_termios_encode_baud_rate
- * @termios: ktermios structure holding user requested state
- * @ispeed: input speed
- * @ospeed: output speed
- *
- * Encode the speeds set into the passed termios structure. This is
- * used as a library helper for drivers so that they can report back
- * the actual speed selected when it differs from the speed requested
- *
- * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
- * we need to carefully set the bits when the user does not get the
- * desired speed. We allow small margins and preserve as much of possible
- * of the input intent to keep compatibility.
- *
- * Locking: Caller should hold termios lock. This is already held
- * when calling this function from the driver termios handler.
- *
- * The ifdefs deal with platforms whose owners have yet to update them
- * and will all go away once this is done.
- */
-
-void tty_termios_encode_baud_rate(struct ktermios *termios,
- speed_t ibaud, speed_t obaud)
-{
- int i = 0;
- int ifound = -1, ofound = -1;
- int iclose = ibaud/50, oclose = obaud/50;
- int ibinput = 0;
-
- if (obaud == 0) /* CD dropped */
- ibaud = 0; /* Clear ibaud to be sure */
-
- termios->c_ispeed = ibaud;
- termios->c_ospeed = obaud;
-
-#ifdef BOTHER
- /* If the user asked for a precise weird speed give a precise weird
- answer. If they asked for a Bfoo speed they may have problems
- digesting non-exact replies so fuzz a bit */
-
- if ((termios->c_cflag & CBAUD) == BOTHER)
- oclose = 0;
- if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER)
- iclose = 0;
- if ((termios->c_cflag >> IBSHIFT) & CBAUD)
- ibinput = 1; /* An input speed was specified */
-#endif
- termios->c_cflag &= ~CBAUD;
-
- /*
- * Our goal is to find a close match to the standard baud rate
- * returned. Walk the baud rate table and if we get a very close
- * match then report back the speed as a POSIX Bxxxx value by
- * preference
- */
-
- do {
- if (obaud - oclose <= baud_table[i] &&
- obaud + oclose >= baud_table[i]) {
- termios->c_cflag |= baud_bits[i];
- ofound = i;
- }
- if (ibaud - iclose <= baud_table[i] &&
- ibaud + iclose >= baud_table[i]) {
- /* For the case input == output don't set IBAUD bits
- if the user didn't do so */
- if (ofound == i && !ibinput)
- ifound = i;
-#ifdef IBSHIFT
- else {
- ifound = i;
- termios->c_cflag |= (baud_bits[i] << IBSHIFT);
- }
-#endif
- }
- } while (++i < n_baud_table);
-
- /*
- * If we found no match then use BOTHER if provided or warn
- * the user their platform maintainer needs to wake up if not.
- */
-#ifdef BOTHER
- if (ofound == -1)
- termios->c_cflag |= BOTHER;
- /* Set exact input bits only if the input and output differ or the
- user already did */
- if (ifound == -1 && (ibaud != obaud || ibinput))
- termios->c_cflag |= (BOTHER << IBSHIFT);
-#else
- if (ifound == -1 || ofound == -1)
- pr_warn_once("tty: Unable to return correct speed data as your architecture needs updating.\n");
-#endif
-}
-EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
-
-/**
- * tty_encode_baud_rate - set baud rate of the tty
- * @ibaud: input baud rate
- * @obad: output baud rate
- *
- * Update the current termios data for the tty with the new speed
- * settings. The caller must hold the termios_rwsem for the tty in
- * question.
- */
-
-void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
-{
- tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud);
-}
-EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
-
/**
* tty_termios_copy_hw - copy hardware settings
* @new: New termios
diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c
new file mode 100644
index 0000000..e703230
--- /dev/null
+++ b/drivers/tty/tty_jobctrl.c
@@ -0,0 +1,554 @@
+/*
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/task.h>
+#include <linux/tty.h>
+#include <linux/fcntl.h>
+#include <linux/uaccess.h>
+
+static int is_ignored(int sig)
+{
+ return (sigismember(¤t->blocked, sig) ||
+ current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
+}
+
+/**
+ * tty_check_change - check for POSIX terminal changes
+ * @tty: tty to check
+ *
+ * If we try to write to, or set the state of, a terminal and we're
+ * not in the foreground, send a SIGTTOU. If the signal is blocked or
+ * ignored, go ahead and perform the operation. (POSIX 7.2)
+ *
+ * Locking: ctrl_lock
+ */
+int __tty_check_change(struct tty_struct *tty, int sig)
+{
+ unsigned long flags;
+ struct pid *pgrp, *tty_pgrp;
+ int ret = 0;
+
+ if (current->signal->tty != tty)
+ return 0;
+
+ rcu_read_lock();
+ pgrp = task_pgrp(current);
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ tty_pgrp = tty->pgrp;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
+ if (tty_pgrp && pgrp != tty->pgrp) {
+ if (is_ignored(sig)) {
+ if (sig == SIGTTIN)
+ ret = -EIO;
+ } else if (is_current_pgrp_orphaned())
+ ret = -EIO;
+ else {
+ kill_pgrp(pgrp, sig, 1);
+ set_thread_flag(TIF_SIGPENDING);
+ ret = -ERESTARTSYS;
+ }
+ }
+ rcu_read_unlock();
+
+ if (!tty_pgrp)
+ tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig);
+
+ return ret;
+}
+
+int tty_check_change(struct tty_struct *tty)
+{
+ return __tty_check_change(tty, SIGTTOU);
+}
+EXPORT_SYMBOL(tty_check_change);
+
+void proc_clear_tty(struct task_struct *p)
+{
+ unsigned long flags;
+ struct tty_struct *tty;
+ spin_lock_irqsave(&p->sighand->siglock, flags);
+ tty = p->signal->tty;
+ p->signal->tty = NULL;
+ spin_unlock_irqrestore(&p->sighand->siglock, flags);
+ tty_kref_put(tty);
+}
+
+/**
+ * proc_set_tty - set the controlling terminal
+ *
+ * Only callable by the session leader and only if it does not already have
+ * a controlling terminal.
+ *
+ * Caller must hold: tty_lock()
+ * a readlock on tasklist_lock
+ * sighand lock
+ */
+static void __proc_set_tty(struct tty_struct *tty)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ /*
+ * The session and fg pgrp references will be non-NULL if
+ * tiocsctty() is stealing the controlling tty
+ */
+ put_pid(tty->session);
+ put_pid(tty->pgrp);
+ tty->pgrp = get_pid(task_pgrp(current));
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ tty->session = get_pid(task_session(current));
+ if (current->signal->tty) {
+ tty_debug(tty, "current tty %s not NULL!!\n",
+ current->signal->tty->name);
+ tty_kref_put(current->signal->tty);
+ }
+ put_pid(current->signal->tty_old_pgrp);
+ current->signal->tty = tty_kref_get(tty);
+ current->signal->tty_old_pgrp = NULL;
+}
+
+static void proc_set_tty(struct tty_struct *tty)
+{
+ spin_lock_irq(¤t->sighand->siglock);
+ __proc_set_tty(tty);
+ spin_unlock_irq(¤t->sighand->siglock);
+}
+
+/*
+ * Called by tty_open() to set the controlling tty if applicable.
+ */
+void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty)
+{
+ read_lock(&tasklist_lock);
+ spin_lock_irq(¤t->sighand->siglock);
+ if (current->signal->leader &&
+ !current->signal->tty &&
+ tty->session == NULL) {
+ /*
+ * Don't let a process that only has write access to the tty
+ * obtain the privileges associated with having a tty as
+ * controlling terminal (being able to reopen it with full
+ * access through /dev/tty, being able to perform pushback).
+ * Many distributions set the group of all ttys to "tty" and
+ * grant write-only access to all terminals for setgid tty
+ * binaries, which should not imply full privileges on all ttys.
+ *
+ * This could theoretically break old code that performs open()
+ * on a write-only file descriptor. In that case, it might be
+ * necessary to also permit this if
+ * inode_permission(inode, MAY_READ) == 0.
+ */
+ if (filp->f_mode & FMODE_READ)
+ __proc_set_tty(tty);
+ }
+ spin_unlock_irq(¤t->sighand->siglock);
+ read_unlock(&tasklist_lock);
+}
+
+struct tty_struct *get_current_tty(void)
+{
+ struct tty_struct *tty;
+ unsigned long flags;
+
+ spin_lock_irqsave(¤t->sighand->siglock, flags);
+ tty = tty_kref_get(current->signal->tty);
+ spin_unlock_irqrestore(¤t->sighand->siglock, flags);
+ return tty;
+}
+EXPORT_SYMBOL_GPL(get_current_tty);
+
+/*
+ * Called from tty_release().
+ */
+void session_clear_tty(struct pid *session)
+{
+ struct task_struct *p;
+ do_each_pid_task(session, PIDTYPE_SID, p) {
+ proc_clear_tty(p);
+ } while_each_pid_task(session, PIDTYPE_SID, p);
+}
+
+/**
+ * tty_signal_session_leader - sends SIGHUP to session leader
+ * @tty controlling tty
+ * @exit_session if non-zero, signal all foreground group processes
+ *
+ * Send SIGHUP and SIGCONT to the session leader and its process group.
+ * Optionally, signal all processes in the foreground process group.
+ *
+ * Returns the number of processes in the session with this tty
+ * as their controlling terminal. This value is used to drop
+ * tty references for those processes.
+ */
+int tty_signal_session_leader(struct tty_struct *tty, int exit_session)
+{
+ struct task_struct *p;
+ int refs = 0;
+ struct pid *tty_pgrp = NULL;
+
+ read_lock(&tasklist_lock);
+ if (tty->session) {
+ do_each_pid_task(tty->session, PIDTYPE_SID, p) {
+ spin_lock_irq(&p->sighand->siglock);
+ if (p->signal->tty == tty) {
+ p->signal->tty = NULL;
+ /* We defer the dereferences outside fo
+ the tasklist lock */
+ refs++;
+ }
+ if (!p->signal->leader) {
+ spin_unlock_irq(&p->sighand->siglock);
+ continue;
+ }
+ __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
+ __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
+ put_pid(p->signal->tty_old_pgrp); /* A noop */
+ spin_lock(&tty->ctrl_lock);
+ tty_pgrp = get_pid(tty->pgrp);
+ if (tty->pgrp)
+ p->signal->tty_old_pgrp = get_pid(tty->pgrp);
+ spin_unlock(&tty->ctrl_lock);
+ spin_unlock_irq(&p->sighand->siglock);
+ } while_each_pid_task(tty->session, PIDTYPE_SID, p);
+ }
+ read_unlock(&tasklist_lock);
+
+ if (tty_pgrp) {
+ if (exit_session)
+ kill_pgrp(tty_pgrp, SIGHUP, exit_session);
+ put_pid(tty_pgrp);
+ }
+
+ return refs;
+}
+
+/**
+ * disassociate_ctty - disconnect controlling tty
+ * @on_exit: true if exiting so need to "hang up" the session
+ *
+ * This function is typically called only by the session leader, when
+ * it wants to disassociate itself from its controlling tty.
+ *
+ * It performs the following functions:
+ * (1) Sends a SIGHUP and SIGCONT to the foreground process group
+ * (2) Clears the tty from being controlling the session
+ * (3) Clears the controlling tty for all processes in the
+ * session group.
+ *
+ * The argument on_exit is set to 1 if called when a process is
+ * exiting; it is 0 if called by the ioctl TIOCNOTTY.
+ *
+ * Locking:
+ * BTM is taken for hysterical raisons, and held when
+ * called from no_tty().
+ * tty_mutex is taken to protect tty
+ * ->siglock is taken to protect ->signal/->sighand
+ * tasklist_lock is taken to walk process list for sessions
+ * ->siglock is taken to protect ->signal/->sighand
+ */
+void disassociate_ctty(int on_exit)
+{
+ struct tty_struct *tty;
+
+ if (!current->signal->leader)
+ return;
+
+ tty = get_current_tty();
+ if (tty) {
+ if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) {
+ tty_vhangup_session(tty);
+ } else {
+ struct pid *tty_pgrp = tty_get_pgrp(tty);
+ if (tty_pgrp) {
+ kill_pgrp(tty_pgrp, SIGHUP, on_exit);
+ if (!on_exit)
+ kill_pgrp(tty_pgrp, SIGCONT, on_exit);
+ put_pid(tty_pgrp);
+ }
+ }
+ tty_kref_put(tty);
+
+ } else if (on_exit) {
+ struct pid *old_pgrp;
+ spin_lock_irq(¤t->sighand->siglock);
+ old_pgrp = current->signal->tty_old_pgrp;
+ current->signal->tty_old_pgrp = NULL;
+ spin_unlock_irq(¤t->sighand->siglock);
+ if (old_pgrp) {
+ kill_pgrp(old_pgrp, SIGHUP, on_exit);
+ kill_pgrp(old_pgrp, SIGCONT, on_exit);
+ put_pid(old_pgrp);
+ }
+ return;
+ }
+
+ spin_lock_irq(¤t->sighand->siglock);
+ put_pid(current->signal->tty_old_pgrp);
+ current->signal->tty_old_pgrp = NULL;
+
+ tty = tty_kref_get(current->signal->tty);
+ if (tty) {
+ unsigned long flags;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ put_pid(tty->session);
+ put_pid(tty->pgrp);
+ tty->session = NULL;
+ tty->pgrp = NULL;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ tty_kref_put(tty);
+ }
+
+ spin_unlock_irq(¤t->sighand->siglock);
+ /* Now clear signal->tty under the lock */
+ read_lock(&tasklist_lock);
+ session_clear_tty(task_session(current));
+ read_unlock(&tasklist_lock);
+}
+
+/**
+ *
+ * no_tty - Ensure the current process does not have a controlling tty
+ */
+void no_tty(void)
+{
+ /* FIXME: Review locking here. The tty_lock never covered any race
+ between a new association and proc_clear_tty but possible we need
+ to protect against this anyway */
+ struct task_struct *tsk = current;
+ disassociate_ctty(0);
+ proc_clear_tty(tsk);
+}
+
+/**
+ * tiocsctty - set controlling tty
+ * @tty: tty structure
+ * @arg: user argument
+ *
+ * This ioctl is used to manage job control. It permits a session
+ * leader to set this tty as the controlling tty for the session.
+ *
+ * Locking:
+ * Takes tty_lock() to serialize proc_set_tty() for this tty
+ * Takes tasklist_lock internally to walk sessions
+ * Takes ->siglock() when updating signal->tty
+ */
+static int tiocsctty(struct tty_struct *tty, struct file *file, int arg)
+{
+ int ret = 0;
+
+ tty_lock(tty);
+ read_lock(&tasklist_lock);
+
+ if (current->signal->leader && (task_session(current) == tty->session))
+ goto unlock;
+
+ /*
+ * The process must be a session leader and
+ * not have a controlling tty already.
+ */
+ if (!current->signal->leader || current->signal->tty) {
+ ret = -EPERM;
+ goto unlock;
+ }
+
+ if (tty->session) {
+ /*
+ * This tty is already the controlling
+ * tty for another session group!
+ */
+ if (arg == 1 && capable(CAP_SYS_ADMIN)) {
+ /*
+ * Steal it away
+ */
+ session_clear_tty(tty->session);
+ } else {
+ ret = -EPERM;
+ goto unlock;
+ }
+ }
+
+ /* See the comment in tty_open_proc_set_tty(). */
+ if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) {
+ ret = -EPERM;
+ goto unlock;
+ }
+
+ proc_set_tty(tty);
+unlock:
+ read_unlock(&tasklist_lock);
+ tty_unlock(tty);
+ return ret;
+}
+
+/**
+ * tty_get_pgrp - return a ref counted pgrp pid
+ * @tty: tty to read
+ *
+ * Returns a refcounted instance of the pid struct for the process
+ * group controlling the tty.
+ */
+struct pid *tty_get_pgrp(struct tty_struct *tty)
+{
+ unsigned long flags;
+ struct pid *pgrp;
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ pgrp = get_pid(tty->pgrp);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
+ return pgrp;
+}
+EXPORT_SYMBOL_GPL(tty_get_pgrp);
+
+/*
+ * This checks not only the pgrp, but falls back on the pid if no
+ * satisfactory pgrp is found. I dunno - gdb doesn't work correctly
+ * without this...
+ *
+ * The caller must hold rcu lock or the tasklist lock.
+ */
+static struct pid *session_of_pgrp(struct pid *pgrp)
+{
+ struct task_struct *p;
+ struct pid *sid = NULL;
+
+ p = pid_task(pgrp, PIDTYPE_PGID);
+ if (p == NULL)
+ p = pid_task(pgrp, PIDTYPE_PID);
+ if (p != NULL)
+ sid = task_session(p);
+
+ return sid;
+}
+
+/**
+ * tiocgpgrp - get process group
+ * @tty: tty passed by user
+ * @real_tty: tty side of the tty passed by the user if a pty else the tty
+ * @p: returned pid
+ *
+ * Obtain the process group of the tty. If there is no process group
+ * return an error.
+ *
+ * Locking: none. Reference to current->signal->tty is safe.
+ */
+static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
+{
+ struct pid *pid;
+ int ret;
+ /*
+ * (tty == real_tty) is a cheap way of
+ * testing if the tty is NOT a master pty.
+ */
+ if (tty == real_tty && current->signal->tty != real_tty)
+ return -ENOTTY;
+ pid = tty_get_pgrp(real_tty);
+ ret = put_user(pid_vnr(pid), p);
+ put_pid(pid);
+ return ret;
+}
+
+/**
+ * tiocspgrp - attempt to set process group
+ * @tty: tty passed by user
+ * @real_tty: tty side device matching tty passed by user
+ * @p: pid pointer
+ *
+ * Set the process group of the tty to the session passed. Only
+ * permitted where the tty session is our session.
+ *
+ * Locking: RCU, ctrl lock
+ */
+static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
+{
+ struct pid *pgrp;
+ pid_t pgrp_nr;
+ int retval = tty_check_change(real_tty);
+
+ if (retval == -EIO)
+ return -ENOTTY;
+ if (retval)
+ return retval;
+ if (!current->signal->tty ||
+ (current->signal->tty != real_tty) ||
+ (real_tty->session != task_session(current)))
+ return -ENOTTY;
+ if (get_user(pgrp_nr, p))
+ return -EFAULT;
+ if (pgrp_nr < 0)
+ return -EINVAL;
+ rcu_read_lock();
+ pgrp = find_vpid(pgrp_nr);
+ retval = -ESRCH;
+ if (!pgrp)
+ goto out_unlock;
+ retval = -EPERM;
+ if (session_of_pgrp(pgrp) != task_session(current))
+ goto out_unlock;
+ retval = 0;
+ spin_lock_irq(&tty->ctrl_lock);
+ put_pid(real_tty->pgrp);
+ real_tty->pgrp = get_pid(pgrp);
+ spin_unlock_irq(&tty->ctrl_lock);
+out_unlock:
+ rcu_read_unlock();
+ return retval;
+}
+
+/**
+ * tiocgsid - get session id
+ * @tty: tty passed by user
+ * @real_tty: tty side of the tty passed by the user if a pty else the tty
+ * @p: pointer to returned session id
+ *
+ * Obtain the session id of the tty. If there is no session
+ * return an error.
+ *
+ * Locking: none. Reference to current->signal->tty is safe.
+ */
+static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
+{
+ /*
+ * (tty == real_tty) is a cheap way of
+ * testing if the tty is NOT a master pty.
+ */
+ if (tty == real_tty && current->signal->tty != real_tty)
+ return -ENOTTY;
+ if (!real_tty->session)
+ return -ENOTTY;
+ return put_user(pid_vnr(real_tty->session), p);
+}
+
+/*
+ * Called from tty_ioctl(). If tty is a pty then real_tty is the slave side,
+ * if not then tty == real_tty.
+ */
+long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct file *file, unsigned int cmd, unsigned long arg)
+{
+ void __user *p = (void __user *)arg;
+
+ switch (cmd) {
+ case TIOCNOTTY:
+ if (current->signal->tty != tty)
+ return -ENOTTY;
+ no_tty();
+ return 0;
+ case TIOCSCTTY:
+ return tiocsctty(real_tty, file, arg);
+ case TIOCGPGRP:
+ return tiocgpgrp(tty, real_tty, p);
+ case TIOCSPGRP:
+ return tiocspgrp(tty, real_tty, p);
+ case TIOCGSID:
+ return tiocgsid(tty, real_tty, p);
+ }
+ return -ENOIOCTLCMD;
+}
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 36e1b8c..accbd12 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -80,21 +80,17 @@ void clear_selection(void)
/*
* User settable table: what characters are to be considered alphabetic?
- * 256 bits. Locked by the console lock.
+ * 128 bits. Locked by the console lock.
*/
-static u32 inwordLut[8]={
+static u32 inwordLut[]={
0x00000000, /* control chars */
- 0x03FF0000, /* digits */
+ 0x03FFE000, /* digits and "-./" */
0x87FFFFFE, /* uppercase and '_' */
0x07FFFFFE, /* lowercase */
- 0x00000000,
- 0x00000000,
- 0xFF7FFFFF, /* latin-1 accented letters, not multiplication sign */
- 0xFF7FFFFF /* latin-1 accented letters, not division sign */
};
static inline int inword(const u16 c) {
- return c > 0xff || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
+ return c > 0x7f || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
}
/**
@@ -106,10 +102,10 @@ static inline int inword(const u16 c) {
*/
int sel_loadlut(char __user *p)
{
- u32 tmplut[8];
- if (copy_from_user(tmplut, (u32 __user *)(p+4), 32))
+ u32 tmplut[ARRAY_SIZE(inwordLut)];
+ if (copy_from_user(tmplut, (u32 __user *)(p+4), sizeof(inwordLut)))
return -EFAULT;
- memcpy(inwordLut, tmplut, 32);
+ memcpy(inwordLut, tmplut, sizeof(inwordLut));
return 0;
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 5c4933b..9c99452 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -181,7 +181,7 @@ int console_blanked;
static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */
static int vesa_off_interval;
-static int blankinterval = 10*60;
+static int blankinterval;
core_param(consoleblank, blankinterval, int, 0444);
static DECLARE_WORK(console_work, console_callback);
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 9b51989..f61f852 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -817,12 +817,9 @@ static int vhost_net_open(struct inode *inode, struct file *f)
struct vhost_virtqueue **vqs;
int i;
- n = kmalloc(sizeof *n, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
- if (!n) {
- n = vmalloc(sizeof *n);
- if (!n)
- return -ENOMEM;
- }
+ n = kvmalloc(sizeof *n, GFP_KERNEL | __GFP_REPEAT);
+ if (!n)
+ return -ENOMEM;
vqs = kmalloc(VHOST_NET_VQ_MAX * sizeof(*vqs), GFP_KERNEL);
if (!vqs) {
kvfree(n);
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index f0ba362..042030e 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -534,18 +534,9 @@ long vhost_dev_set_owner(struct vhost_dev *dev)
}
EXPORT_SYMBOL_GPL(vhost_dev_set_owner);
-static void *vhost_kvzalloc(unsigned long size)
-{
- void *n = kzalloc(size, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
-
- if (!n)
- n = vzalloc(size);
- return n;
-}
-
struct vhost_umem *vhost_dev_reset_owner_prepare(void)
{
- return vhost_kvzalloc(sizeof(struct vhost_umem));
+ return kvzalloc(sizeof(struct vhost_umem), GFP_KERNEL);
}
EXPORT_SYMBOL_GPL(vhost_dev_reset_owner_prepare);
@@ -1276,7 +1267,7 @@ EXPORT_SYMBOL_GPL(vhost_vq_access_ok);
static struct vhost_umem *vhost_umem_alloc(void)
{
- struct vhost_umem *umem = vhost_kvzalloc(sizeof(*umem));
+ struct vhost_umem *umem = kvzalloc(sizeof(*umem), GFP_KERNEL);
if (!umem)
return NULL;
@@ -1302,7 +1293,7 @@ static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m)
return -EOPNOTSUPP;
if (mem.nregions > max_mem_regions)
return -E2BIG;
- newmem = vhost_kvzalloc(size + mem.nregions * sizeof(*m->regions));
+ newmem = kvzalloc(size + mem.nregions * sizeof(*m->regions), GFP_KERNEL);
if (!newmem)
return -ENOMEM;
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index d939ac1..3acef3c 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -508,12 +508,9 @@ static int vhost_vsock_dev_open(struct inode *inode, struct file *file)
/* This struct is large and allocation could fail, fall back to vmalloc
* if there is no other way.
*/
- vsock = kzalloc(sizeof(*vsock), GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
- if (!vsock) {
- vsock = vmalloc(sizeof(*vsock));
- if (!vsock)
- return -ENOMEM;
- }
+ vsock = kvmalloc(sizeof(*vsock), GFP_KERNEL | __GFP_REPEAT);
+ if (!vsock)
+ return -ENOMEM;
vqs = kmalloc_array(ARRAY_SIZE(vsock->vqs), sizeof(*vqs), GFP_KERNEL);
if (!vqs) {
diff --git a/drivers/video/fbdev/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
index ff2a5d2..6b444400 100644
--- a/drivers/video/fbdev/intelfb/intelfbdrv.c
+++ b/drivers/video/fbdev/intelfb/intelfbdrv.c
@@ -934,7 +934,7 @@ static __inline__ int var_to_refresh(const struct fb_var_screeninfo *var)
}
/***************************************************************
- * Various intialisation functions *
+ * Various initialisation functions *
***************************************************************/
static void get_initial_mode(struct intelfb_info *dinfo)
diff --git a/drivers/video/fbdev/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
index 1c1e95a..ce4c472 100644
--- a/drivers/video/fbdev/vermilion/vermilion.c
+++ b/drivers/video/fbdev/vermilion/vermilion.c
@@ -37,7 +37,7 @@
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/pci.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/tlbflush.h>
#include <linux/mmzone.h>
diff --git a/drivers/virt/fsl_hypervisor.c b/drivers/virt/fsl_hypervisor.c
index 150ce2a..d3eca87 100644
--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -243,11 +243,8 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
sg_list = PTR_ALIGN(sg_list_unaligned, sizeof(struct fh_sg_list));
/* Get the physical addresses of the source buffer */
- down_read(¤t->mm->mmap_sem);
- num_pinned = get_user_pages(param.local_vaddr - lb_offset,
- num_pages, (param.source == -1) ? 0 : FOLL_WRITE,
- pages, NULL);
- up_read(¤t->mm->mmap_sem);
+ num_pinned = get_user_pages_unlocked(param.local_vaddr - lb_offset,
+ num_pages, pages, (param.source == -1) ? 0 : FOLL_WRITE);
if (num_pinned != num_pages) {
/* get_user_pages() failed */
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 70c7194..67fbe35 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -34,7 +34,7 @@
#include <linux/nmi.h>
#include <linux/kdebug.h>
#include <linux/notifier.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#endif /* CONFIG_HPWDT_NMI_DECODING */
#include <asm/nmi.h>
#include <asm/frame.h>
diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 6890897..10f1ef5 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -87,18 +87,6 @@ struct user_evtchn {
bool enabled;
};
-static evtchn_port_t *evtchn_alloc_ring(unsigned int size)
-{
- evtchn_port_t *ring;
- size_t s = size * sizeof(*ring);
-
- ring = kmalloc(s, GFP_KERNEL);
- if (!ring)
- ring = vmalloc(s);
-
- return ring;
-}
-
static void evtchn_free_ring(evtchn_port_t *ring)
{
kvfree(ring);
@@ -334,7 +322,7 @@ static int evtchn_resize_ring(struct per_user_data *u)
else
new_size = 2 * u->ring_size;
- new_ring = evtchn_alloc_ring(new_size);
+ new_ring = kvmalloc(new_size * sizeof(*new_ring), GFP_KERNEL);
if (!new_ring)
return -ENOMEM;
diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c
index 328c398..967f069 100644
--- a/drivers/xen/xenfs/super.c
+++ b/drivers/xen/xenfs/super.c
@@ -44,14 +44,14 @@ static const struct file_operations capabilities_file_ops = {
static int xenfs_fill_super(struct super_block *sb, void *data, int silent)
{
- static struct tree_descr xenfs_files[] = {
+ static const struct tree_descr xenfs_files[] = {
[2] = { "xenbus", &xen_xenbus_fops, S_IRUSR|S_IWUSR },
{ "capabilities", &capabilities_file_ops, S_IRUGO },
{ "privcmd", &xen_privcmd_fops, S_IRUSR|S_IWUSR },
{""},
};
- static struct tree_descr xenfs_init_files[] = {
+ static const struct tree_descr xenfs_init_files[] = {
[2] = { "xenbus", &xen_xenbus_fops, S_IRUSR|S_IWUSR },
{ "capabilities", &capabilities_file_ops, S_IRUGO },
{ "privcmd", &xen_privcmd_fops, S_IRUSR|S_IWUSR },
diff --git a/firmware/Makefile b/firmware/Makefile
index e297e1b..fa3e81c 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -176,7 +176,8 @@
wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
include/config/ppc32.h include/config/ppc64.h \
include/config/superh32.h include/config/superh64.h \
- include/config/x86_32.h include/config/x86_64.h)
+ include/config/x86_32.h include/config/x86_64.h \
+ firmware/Makefile)
$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps)
$(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index 2f8bab3..773749b 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -7,7 +7,7 @@
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/buffer_head.h>
-#include <linux/amigaffs.h>
+#include "amigaffs.h"
#include <linux/mutex.h>
#include <linux/workqueue.h>
@@ -173,7 +173,7 @@ extern int affs_link(struct dentry *olddentry, struct inode *dir,
struct dentry *dentry);
extern int affs_symlink(struct inode *dir, struct dentry *dentry,
const char *symname);
-extern int affs_rename(struct inode *old_dir, struct dentry *old_dentry,
+extern int affs_rename2(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir, struct dentry *new_dentry,
unsigned int flags);
diff --git a/include/linux/amigaffs.h b/fs/affs/amigaffs.h
similarity index 100%
rename from include/linux/amigaffs.h
rename to fs/affs/amigaffs.h
diff --git a/fs/affs/dir.c b/fs/affs/dir.c
index f1e7294..591ecd7 100644
--- a/fs/affs/dir.c
+++ b/fs/affs/dir.c
@@ -35,7 +35,7 @@ const struct inode_operations affs_dir_inode_operations = {
.symlink = affs_symlink,
.mkdir = affs_mkdir,
.rmdir = affs_rmdir,
- .rename = affs_rename,
+ .rename = affs_rename2,
.setattr = affs_notify_change,
};
diff --git a/fs/affs/file.c b/fs/affs/file.c
index 0deec9c..196ee7f 100644
--- a/fs/affs/file.c
+++ b/fs/affs/file.c
@@ -499,7 +499,7 @@ affs_getemptyblk_ino(struct inode *inode, int block)
}
static int
-affs_do_readpage_ofs(struct page *page, unsigned to)
+affs_do_readpage_ofs(struct page *page, unsigned to, int create)
{
struct inode *inode = page->mapping->host;
struct super_block *sb = inode->i_sb;
@@ -518,7 +518,7 @@ affs_do_readpage_ofs(struct page *page, unsigned to)
boff = tmp % bsize;
while (pos < to) {
- bh = affs_bread_ino(inode, bidx, 0);
+ bh = affs_bread_ino(inode, bidx, create);
if (IS_ERR(bh))
return PTR_ERR(bh);
tmp = min(bsize - boff, to - pos);
@@ -620,7 +620,7 @@ affs_readpage_ofs(struct file *file, struct page *page)
memset(page_address(page) + to, 0, PAGE_SIZE - to);
}
- err = affs_do_readpage_ofs(page, to);
+ err = affs_do_readpage_ofs(page, to, 0);
if (!err)
SetPageUptodate(page);
unlock_page(page);
@@ -657,7 +657,7 @@ static int affs_write_begin_ofs(struct file *file, struct address_space *mapping
return 0;
/* XXX: inefficient but safe in the face of short writes */
- err = affs_do_readpage_ofs(page, PAGE_SIZE);
+ err = affs_do_readpage_ofs(page, PAGE_SIZE, 1);
if (err) {
unlock_page(page);
put_page(page);
@@ -679,7 +679,7 @@ static int affs_write_end_ofs(struct file *file, struct address_space *mapping,
int written;
from = pos & (PAGE_SIZE - 1);
- to = pos + len;
+ to = from + len;
/*
* XXX: not sure if this can handle short copies (len < copied), but
* we don't have to, because the page should always be uptodate here,
diff --git a/fs/affs/inode.c b/fs/affs/inode.c
index abcc598..fd4ef3c 100644
--- a/fs/affs/inode.c
+++ b/fs/affs/inode.c
@@ -140,6 +140,7 @@ struct inode *affs_iget(struct super_block *sb, unsigned long ino)
inode->i_fop = &affs_file_operations;
break;
case ST_SOFTLINK:
+ inode->i_size = strlen((char *)AFFS_HEAD(bh)->table);
inode->i_mode |= S_IFLNK;
inode_nohighmem(inode);
inode->i_op = &affs_symlink_inode_operations;
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index 96dd1d0..46d3ace 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -365,6 +365,7 @@ affs_symlink(struct inode *dir, struct dentry *dentry, const char *symname)
symname++;
}
*p = 0;
+ inode->i_size = i + 1;
mark_buffer_dirty_inode(bh, inode);
affs_brelse(bh);
mark_inode_dirty(inode);
@@ -393,21 +394,14 @@ affs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
return affs_add_entry(dir, inode, dentry, ST_LINKFILE);
}
-int
+static int
affs_rename(struct inode *old_dir, struct dentry *old_dentry,
- struct inode *new_dir, struct dentry *new_dentry,
- unsigned int flags)
+ struct inode *new_dir, struct dentry *new_dentry)
{
struct super_block *sb = old_dir->i_sb;
struct buffer_head *bh = NULL;
int retval;
- if (flags & ~RENAME_NOREPLACE)
- return -EINVAL;
-
- pr_debug("%s(old=%lu,\"%pd\" to new=%lu,\"%pd\")\n", __func__,
- old_dir->i_ino, old_dentry, new_dir->i_ino, new_dentry);
-
retval = affs_check_name(new_dentry->d_name.name,
new_dentry->d_name.len,
affs_nofilenametruncate(old_dentry));
@@ -447,6 +441,76 @@ affs_rename(struct inode *old_dir, struct dentry *old_dentry,
return retval;
}
+static int
+affs_xrename(struct inode *old_dir, struct dentry *old_dentry,
+ struct inode *new_dir, struct dentry *new_dentry)
+{
+
+ struct super_block *sb = old_dir->i_sb;
+ struct buffer_head *bh_old = NULL;
+ struct buffer_head *bh_new = NULL;
+ int retval;
+
+ bh_old = affs_bread(sb, d_inode(old_dentry)->i_ino);
+ if (!bh_old)
+ return -EIO;
+
+ bh_new = affs_bread(sb, d_inode(new_dentry)->i_ino);
+ if (!bh_new)
+ return -EIO;
+
+ /* Remove old header from its parent directory. */
+ affs_lock_dir(old_dir);
+ retval = affs_remove_hash(old_dir, bh_old);
+ affs_unlock_dir(old_dir);
+ if (retval)
+ goto done;
+
+ /* Remove new header from its parent directory. */
+ affs_lock_dir(new_dir);
+ retval = affs_remove_hash(new_dir, bh_new);
+ affs_unlock_dir(new_dir);
+ if (retval)
+ goto done;
+
+ /* Insert old into the new directory with the new name. */
+ affs_copy_name(AFFS_TAIL(sb, bh_old)->name, new_dentry);
+ affs_fix_checksum(sb, bh_old);
+ affs_lock_dir(new_dir);
+ retval = affs_insert_hash(new_dir, bh_old);
+ affs_unlock_dir(new_dir);
+
+ /* Insert new into the old directory with the old name. */
+ affs_copy_name(AFFS_TAIL(sb, bh_new)->name, old_dentry);
+ affs_fix_checksum(sb, bh_new);
+ affs_lock_dir(old_dir);
+ retval = affs_insert_hash(old_dir, bh_new);
+ affs_unlock_dir(old_dir);
+done:
+ mark_buffer_dirty_inode(bh_old, new_dir);
+ mark_buffer_dirty_inode(bh_new, old_dir);
+ affs_brelse(bh_old);
+ affs_brelse(bh_new);
+ return retval;
+}
+
+int affs_rename2(struct inode *old_dir, struct dentry *old_dentry,
+ struct inode *new_dir, struct dentry *new_dentry,
+ unsigned int flags)
+{
+
+ if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE))
+ return -EINVAL;
+
+ pr_debug("%s(old=%lu,\"%pd\" to new=%lu,\"%pd\")\n", __func__,
+ old_dir->i_ino, old_dentry, new_dir->i_ino, new_dentry);
+
+ if (flags & RENAME_EXCHANGE)
+ return affs_xrename(old_dir, old_dentry, new_dir, new_dentry);
+
+ return affs_rename(old_dir, old_dentry, new_dir, new_dentry);
+}
+
static struct dentry *affs_get_parent(struct dentry *child)
{
struct inode *parent;
@@ -477,11 +541,6 @@ static struct inode *affs_nfs_get_inode(struct super_block *sb, u64 ino,
if (IS_ERR(inode))
return ERR_CAST(inode);
- if (generation && inode->i_generation != generation) {
- iput(inode);
- return ERR_PTR(-ESTALE);
- }
-
return inode;
}
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index bee1a36..f471809 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -818,7 +818,7 @@ static const struct super_operations s_ops = {
static int bm_fill_super(struct super_block *sb, void *data, int silent)
{
int err;
- static struct tree_descr bm_files[] = {
+ static const struct tree_descr bm_files[] = {
[2] = {"status", &bm_status_operations, S_IWUSR|S_IRUGO},
[3] = {"register", &bm_register_operations, S_IWUSR},
/* last one */ {""}
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 7dc8844..1c3b6c5 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -5392,13 +5392,10 @@ int btrfs_compare_trees(struct btrfs_root *left_root,
goto out;
}
- tmp_buf = kmalloc(fs_info->nodesize, GFP_KERNEL | __GFP_NOWARN);
+ tmp_buf = kvmalloc(fs_info->nodesize, GFP_KERNEL);
if (!tmp_buf) {
- tmp_buf = vmalloc(fs_info->nodesize);
- if (!tmp_buf) {
- ret = -ENOMEM;
- goto out;
- }
+ ret = -ENOMEM;
+ goto out;
}
left_path->search_commit_root = 1;
diff --git a/fs/btrfs/free-space-tree.c b/fs/btrfs/free-space-tree.c
index dd7fb22..fc0bd84 100644
--- a/fs/btrfs/free-space-tree.c
+++ b/fs/btrfs/free-space-tree.c
@@ -167,8 +167,7 @@ static u8 *alloc_bitmap(u32 bitmap_size)
if (mem)
return mem;
- return __vmalloc(bitmap_size, GFP_NOFS | __GFP_HIGHMEM | __GFP_ZERO,
- PAGE_KERNEL);
+ return __vmalloc(bitmap_size, GFP_NOFS | __GFP_ZERO, PAGE_KERNEL);
}
int convert_free_space_to_bitmaps(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index dabfc7a..922a66f 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3539,12 +3539,9 @@ static int btrfs_clone(struct inode *src, struct inode *inode,
u64 last_dest_end = destoff;
ret = -ENOMEM;
- buf = kmalloc(fs_info->nodesize, GFP_KERNEL | __GFP_NOWARN);
- if (!buf) {
- buf = vmalloc(fs_info->nodesize);
- if (!buf)
- return ret;
- }
+ buf = kvmalloc(fs_info->nodesize, GFP_KERNEL);
+ if (!buf)
+ return ret;
path = btrfs_alloc_path();
if (!path) {
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index a60d5bf..3f645cd 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -6360,22 +6360,16 @@ long btrfs_ioctl_send(struct file *mnt_file, void __user *arg_)
sctx->clone_roots_cnt = arg->clone_sources_count;
sctx->send_max_size = BTRFS_SEND_BUF_SIZE;
- sctx->send_buf = kmalloc(sctx->send_max_size, GFP_KERNEL | __GFP_NOWARN);
+ sctx->send_buf = kvmalloc(sctx->send_max_size, GFP_KERNEL);
if (!sctx->send_buf) {
- sctx->send_buf = vmalloc(sctx->send_max_size);
- if (!sctx->send_buf) {
- ret = -ENOMEM;
- goto out;
- }
+ ret = -ENOMEM;
+ goto out;
}
- sctx->read_buf = kmalloc(BTRFS_SEND_READ_SIZE, GFP_KERNEL | __GFP_NOWARN);
+ sctx->read_buf = kvmalloc(BTRFS_SEND_READ_SIZE, GFP_KERNEL);
if (!sctx->read_buf) {
- sctx->read_buf = vmalloc(BTRFS_SEND_READ_SIZE);
- if (!sctx->read_buf) {
- ret = -ENOMEM;
- goto out;
- }
+ ret = -ENOMEM;
+ goto out;
}
sctx->pending_dir_moves = RB_ROOT;
@@ -6396,13 +6390,10 @@ long btrfs_ioctl_send(struct file *mnt_file, void __user *arg_)
alloc_size = arg->clone_sources_count * sizeof(*arg->clone_sources);
if (arg->clone_sources_count) {
- clone_sources_tmp = kmalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN);
+ clone_sources_tmp = kvmalloc(alloc_size, GFP_KERNEL);
if (!clone_sources_tmp) {
- clone_sources_tmp = vmalloc(alloc_size);
- if (!clone_sources_tmp) {
- ret = -ENOMEM;
- goto out;
- }
+ ret = -ENOMEM;
+ goto out;
}
ret = copy_from_user(clone_sources_tmp, arg->clone_sources,
diff --git a/fs/buffer.c b/fs/buffer.c
index 9196f2a..161be58 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -49,7 +49,6 @@
static int fsync_buffers_list(spinlock_t *lock, struct list_head *list);
static int submit_bh_wbc(int op, int op_flags, struct buffer_head *bh,
- unsigned long bio_flags,
struct writeback_control *wbc);
#define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers)
@@ -1830,7 +1829,7 @@ int __block_write_full_page(struct inode *inode, struct page *page,
do {
struct buffer_head *next = bh->b_this_page;
if (buffer_async_write(bh)) {
- submit_bh_wbc(REQ_OP_WRITE, write_flags, bh, 0, wbc);
+ submit_bh_wbc(REQ_OP_WRITE, write_flags, bh, wbc);
nr_underway++;
}
bh = next;
@@ -1884,7 +1883,7 @@ int __block_write_full_page(struct inode *inode, struct page *page,
struct buffer_head *next = bh->b_this_page;
if (buffer_async_write(bh)) {
clear_buffer_dirty(bh);
- submit_bh_wbc(REQ_OP_WRITE, write_flags, bh, 0, wbc);
+ submit_bh_wbc(REQ_OP_WRITE, write_flags, bh, wbc);
nr_underway++;
}
bh = next;
@@ -2379,8 +2378,7 @@ int generic_cont_expand_simple(struct inode *inode, loff_t size)
goto out;
err = pagecache_write_begin(NULL, mapping, size, 0,
- AOP_FLAG_UNINTERRUPTIBLE|AOP_FLAG_CONT_EXPAND,
- &page, &fsdata);
+ AOP_FLAG_CONT_EXPAND, &page, &fsdata);
if (err)
goto out;
@@ -2415,9 +2413,8 @@ static int cont_expand_zero(struct file *file, struct address_space *mapping,
}
len = PAGE_SIZE - zerofrom;
- err = pagecache_write_begin(file, mapping, curpos, len,
- AOP_FLAG_UNINTERRUPTIBLE,
- &page, &fsdata);
+ err = pagecache_write_begin(file, mapping, curpos, len, 0,
+ &page, &fsdata);
if (err)
goto out;
zero_user(page, zerofrom, len);
@@ -2449,9 +2446,8 @@ static int cont_expand_zero(struct file *file, struct address_space *mapping,
}
len = offset - zerofrom;
- err = pagecache_write_begin(file, mapping, curpos, len,
- AOP_FLAG_UNINTERRUPTIBLE,
- &page, &fsdata);
+ err = pagecache_write_begin(file, mapping, curpos, len, 0,
+ &page, &fsdata);
if (err)
goto out;
zero_user(page, zerofrom, len);
@@ -3095,7 +3091,7 @@ void guard_bio_eod(int op, struct bio *bio)
}
static int submit_bh_wbc(int op, int op_flags, struct buffer_head *bh,
- unsigned long bio_flags, struct writeback_control *wbc)
+ struct writeback_control *wbc)
{
struct bio *bio;
@@ -3130,7 +3126,6 @@ static int submit_bh_wbc(int op, int op_flags, struct buffer_head *bh,
bio->bi_end_io = end_bio_bh_io_sync;
bio->bi_private = bh;
- bio->bi_flags |= bio_flags;
/* Take care of bh's that straddle the end of the device */
guard_bio_eod(op, bio);
@@ -3145,16 +3140,9 @@ static int submit_bh_wbc(int op, int op_flags, struct buffer_head *bh,
return 0;
}
-int _submit_bh(int op, int op_flags, struct buffer_head *bh,
- unsigned long bio_flags)
+int submit_bh(int op, int op_flags, struct buffer_head *bh)
{
- return submit_bh_wbc(op, op_flags, bh, bio_flags, NULL);
-}
-EXPORT_SYMBOL_GPL(_submit_bh);
-
-int submit_bh(int op, int op_flags, struct buffer_head *bh)
-{
- return submit_bh_wbc(op, op_flags, bh, 0, NULL);
+ return submit_bh_wbc(op, op_flags, bh, NULL);
}
EXPORT_SYMBOL(submit_bh);
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 26cc954..18c045e 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -74,12 +74,9 @@ dio_get_pages_alloc(const struct iov_iter *it, size_t nbytes,
align = (unsigned long)(it->iov->iov_base + it->iov_offset) &
(PAGE_SIZE - 1);
npages = calc_pages_for(align, nbytes);
- pages = kmalloc(sizeof(*pages) * npages, GFP_KERNEL);
- if (!pages) {
- pages = vmalloc(sizeof(*pages) * npages);
- if (!pages)
- return ERR_PTR(-ENOMEM);
- }
+ pages = kvmalloc(sizeof(*pages) * npages, GFP_KERNEL);
+ if (!pages)
+ return ERR_PTR(-ENOMEM);
for (idx = 0; idx < npages; ) {
size_t start;
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index c681762..1d3fa90 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1666,6 +1666,7 @@ struct ceph_mds_request *
ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode)
{
struct ceph_mds_request *req = kzalloc(sizeof(*req), GFP_NOFS);
+ struct timespec ts;
if (!req)
return ERR_PTR(-ENOMEM);
@@ -1684,7 +1685,8 @@ ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode)
init_completion(&req->r_safe_completion);
INIT_LIST_HEAD(&req->r_unsafe_item);
- req->r_stamp = current_fs_time(mdsc->fsc->sb);
+ ktime_get_real_ts(&ts);
+ req->r_stamp = timespec_trunc(ts, mdsc->fsc->sb->s_time_gran);
req->r_op = op;
req->r_direct_mode = mode;
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 058ac9b..68abbb0 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -478,6 +478,7 @@ find_timestamp(struct cifs_ses *ses)
unsigned char *blobptr;
unsigned char *blobend;
struct ntlmssp2_name *attrptr;
+ struct timespec ts;
if (!ses->auth_key.len || !ses->auth_key.response)
return 0;
@@ -502,7 +503,8 @@ find_timestamp(struct cifs_ses *ses)
blobptr += attrsize; /* advance attr value */
}
- return cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ ktime_get_real_ts(&ts);
+ return cpu_to_le64(cifs_UnixTimeToNT(ts));
}
static int calc_ntlmv2_hash(struct cifs_ses *ses, char *ntlmv2_hash,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 205fd94..4c01b3f 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -478,14 +478,14 @@ decode_lanman_negprot_rsp(struct TCP_Server_Info *server, NEGOTIATE_RSP *pSMBr)
* this requirement.
*/
int val, seconds, remain, result;
- struct timespec ts, utc;
- utc = CURRENT_TIME;
+ struct timespec ts;
+ unsigned long utc = ktime_get_real_seconds();
ts = cnvrtDosUnixTm(rsp->SrvTime.Date,
rsp->SrvTime.Time, 0);
cifs_dbg(FYI, "SrvTime %d sec since 1970 (utc: %d) diff: %d\n",
- (int)ts.tv_sec, (int)utc.tv_sec,
- (int)(utc.tv_sec - ts.tv_sec));
- val = (int)(utc.tv_sec - ts.tv_sec);
+ (int)ts.tv_sec, (int)utc,
+ (int)(utc - ts.tv_sec));
+ val = (int)(utc - ts.tv_sec);
seconds = abs(val);
result = (seconds / MIN_TZ_ADJ) * MIN_TZ_ADJ;
remain = seconds % MIN_TZ_ADJ;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index b261db3..c3b2fa0 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -322,9 +322,9 @@ cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb)
fattr->cf_mode = S_IFDIR | S_IXUGO | S_IRWXU;
fattr->cf_uid = cifs_sb->mnt_uid;
fattr->cf_gid = cifs_sb->mnt_gid;
- fattr->cf_atime = CURRENT_TIME;
- fattr->cf_ctime = CURRENT_TIME;
- fattr->cf_mtime = CURRENT_TIME;
+ ktime_get_real_ts(&fattr->cf_mtime);
+ fattr->cf_mtime = timespec_trunc(fattr->cf_mtime, sb->s_time_gran);
+ fattr->cf_atime = fattr->cf_ctime = fattr->cf_mtime;
fattr->cf_nlink = 2;
fattr->cf_flags |= CIFS_FATTR_DFS_REFERRAL;
}
@@ -586,9 +586,10 @@ static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path,
/* Fill a cifs_fattr struct with info from FILE_ALL_INFO */
static void
cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
- struct cifs_sb_info *cifs_sb, bool adjust_tz,
+ struct super_block *sb, bool adjust_tz,
bool symlink)
{
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);
memset(fattr, 0, sizeof(*fattr));
@@ -598,8 +599,10 @@ cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
if (info->LastAccessTime)
fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
- else
- fattr->cf_atime = CURRENT_TIME;
+ else {
+ ktime_get_real_ts(&fattr->cf_atime);
+ fattr->cf_atime = timespec_trunc(fattr->cf_atime, sb->s_time_gran);
+ }
fattr->cf_ctime = cifs_NTtimeToUnix(info->ChangeTime);
fattr->cf_mtime = cifs_NTtimeToUnix(info->LastWriteTime);
@@ -659,7 +662,6 @@ cifs_get_file_info(struct file *filp)
FILE_ALL_INFO find_data;
struct cifs_fattr fattr;
struct inode *inode = file_inode(filp);
- struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
struct cifsFileInfo *cfile = filp->private_data;
struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
struct TCP_Server_Info *server = tcon->ses->server;
@@ -671,7 +673,7 @@ cifs_get_file_info(struct file *filp)
rc = server->ops->query_file_info(xid, tcon, &cfile->fid, &find_data);
switch (rc) {
case 0:
- cifs_all_info_to_fattr(&fattr, &find_data, cifs_sb, false,
+ cifs_all_info_to_fattr(&fattr, &find_data, inode->i_sb, false,
false);
break;
case -EREMOTE:
@@ -753,7 +755,7 @@ cifs_get_inode_info(struct inode **inode, const char *full_path,
}
if (!rc) {
- cifs_all_info_to_fattr(&fattr, data, cifs_sb, adjust_tz,
+ cifs_all_info_to_fattr(&fattr, data, sb, adjust_tz,
symlink);
} else if (rc == -EREMOTE) {
cifs_create_dfs_fattr(&fattr, sb);
@@ -1363,9 +1365,9 @@ int cifs_unlink(struct inode *dir, struct dentry *dentry)
cifs_inode = CIFS_I(inode);
cifs_inode->time = 0; /* will force revalidate to get info
when needed */
- inode->i_ctime = current_fs_time(sb);
+ inode->i_ctime = current_time(inode);
}
- dir->i_ctime = dir->i_mtime = current_fs_time(sb);
+ dir->i_ctime = dir->i_mtime = current_time(dir);
cifs_inode = CIFS_I(dir);
CIFS_I(dir)->time = 0; /* force revalidate of dir as well */
unlink_out:
@@ -1633,7 +1635,7 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry)
cifsInode->time = 0;
d_inode(direntry)->i_ctime = inode->i_ctime = inode->i_mtime =
- current_fs_time(inode->i_sb);
+ current_time(inode);
rmdir_exit:
kfree(full_path);
@@ -1806,7 +1808,7 @@ cifs_rename2(struct inode *source_dir, struct dentry *source_dentry,
CIFS_I(source_dir)->time = CIFS_I(target_dir)->time = 0;
source_dir->i_ctime = source_dir->i_mtime = target_dir->i_ctime =
- target_dir->i_mtime = current_fs_time(source_dir->i_sb);
+ target_dir->i_mtime = current_time(source_dir);
cifs_rename_exit:
kfree(info_buf_source);
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 11d087b..6116d52 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -833,7 +833,7 @@ static int compat_ioctl_preallocate(struct file *file,
*/
#define XFORM(i) (((i) ^ ((i) << 27) ^ ((i) << 17)) & 0xffffffff)
-#define COMPATIBLE_IOCTL(cmd) XFORM(cmd),
+#define COMPATIBLE_IOCTL(cmd) XFORM((u32)cmd),
/* ioctl should not be warned about even if it's not implemented.
Valid reasons to use this:
- It is implemented with ->compat_ioctl on some device, but programs
diff --git a/fs/dax.c b/fs/dax.c
index 43bbd6d..66d7906 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -509,21 +509,25 @@ int dax_invalidate_mapping_entry_sync(struct address_space *mapping,
static int dax_load_hole(struct address_space *mapping, void **entry,
struct vm_fault *vmf)
{
+ struct inode *inode = mapping->host;
struct page *page;
int ret;
/* Hole page already exists? Return it... */
if (!radix_tree_exceptional_entry(*entry)) {
page = *entry;
- goto out;
+ goto finish_fault;
}
/* This will replace locked radix tree entry with a hole page */
page = find_or_create_page(mapping, vmf->pgoff,
vmf->gfp_mask | __GFP_ZERO);
- if (!page)
- return VM_FAULT_OOM;
- out:
+ if (!page) {
+ ret = VM_FAULT_OOM;
+ goto out;
+ }
+
+finish_fault:
vmf->page = page;
ret = finish_fault(vmf);
vmf->page = NULL;
@@ -531,8 +535,10 @@ static int dax_load_hole(struct address_space *mapping, void **entry,
if (!ret) {
/* Grab reference for PTE that is now referencing the page */
get_page(page);
- return VM_FAULT_NOPAGE;
+ ret = VM_FAULT_NOPAGE;
}
+out:
+ trace_dax_load_hole(inode, vmf, ret);
return ret;
}
@@ -817,6 +823,7 @@ static int dax_writeback_one(struct block_device *bdev,
spin_lock_irq(&mapping->tree_lock);
radix_tree_tag_clear(page_tree, index, PAGECACHE_TAG_DIRTY);
spin_unlock_irq(&mapping->tree_lock);
+ trace_dax_writeback_one(mapping->host, index, size >> PAGE_SHIFT);
dax_unlock:
dax_read_unlock(id);
put_locked_mapping_entry(mapping, index, entry);
@@ -857,6 +864,8 @@ int dax_writeback_mapping_range(struct address_space *mapping,
start_index = wbc->range_start >> PAGE_SHIFT;
end_index = wbc->range_end >> PAGE_SHIFT;
+ trace_dax_writeback_range(inode, start_index, end_index);
+
tag_pages_for_writeback(mapping, start_index, end_index);
pagevec_init(&pvec, 0);
@@ -876,14 +885,14 @@ int dax_writeback_mapping_range(struct address_space *mapping,
ret = dax_writeback_one(bdev, dax_dev, mapping,
indices[i], pvec.pages[i]);
- if (ret < 0) {
- put_dax(dax_dev);
- return ret;
- }
+ if (ret < 0)
+ goto out;
}
}
+out:
put_dax(dax_dev);
- return 0;
+ trace_dax_writeback_range_done(inode, start_index, end_index);
+ return (ret < 0 ? ret : 0);
}
EXPORT_SYMBOL_GPL(dax_writeback_mapping_range);
@@ -916,6 +925,7 @@ static int dax_insert_mapping(struct address_space *mapping,
return PTR_ERR(ret);
*entryp = ret;
+ trace_dax_insert_mapping(mapping->host, vmf, ret);
return vm_insert_mixed(vma, vaddr, pfn);
}
@@ -927,6 +937,7 @@ int dax_pfn_mkwrite(struct vm_fault *vmf)
{
struct file *file = vmf->vma->vm_file;
struct address_space *mapping = file->f_mapping;
+ struct inode *inode = mapping->host;
void *entry, **slot;
pgoff_t index = vmf->pgoff;
@@ -936,6 +947,7 @@ int dax_pfn_mkwrite(struct vm_fault *vmf)
if (entry)
put_unlocked_mapping_entry(mapping, index, entry);
spin_unlock_irq(&mapping->tree_lock);
+ trace_dax_pfn_mkwrite_no_entry(inode, vmf, VM_FAULT_NOPAGE);
return VM_FAULT_NOPAGE;
}
radix_tree_tag_set(&mapping->page_tree, index, PAGECACHE_TAG_DIRTY);
@@ -948,6 +960,7 @@ int dax_pfn_mkwrite(struct vm_fault *vmf)
*/
finish_mkwrite_fault(vmf);
put_locked_mapping_entry(mapping, index, entry);
+ trace_dax_pfn_mkwrite(inode, vmf, VM_FAULT_NOPAGE);
return VM_FAULT_NOPAGE;
}
EXPORT_SYMBOL_GPL(dax_pfn_mkwrite);
@@ -1150,13 +1163,16 @@ static int dax_iomap_pte_fault(struct vm_fault *vmf,
int vmf_ret = 0;
void *entry;
+ trace_dax_pte_fault(inode, vmf, vmf_ret);
/*
* Check whether offset isn't beyond end of file now. Caller is supposed
* to hold locks serializing us with truncate / punch hole so this is
* a reliable test.
*/
- if (pos >= i_size_read(inode))
- return VM_FAULT_SIGBUS;
+ if (pos >= i_size_read(inode)) {
+ vmf_ret = VM_FAULT_SIGBUS;
+ goto out;
+ }
if ((vmf->flags & FAULT_FLAG_WRITE) && !vmf->cow_page)
flags |= IOMAP_WRITE;
@@ -1167,8 +1183,10 @@ static int dax_iomap_pte_fault(struct vm_fault *vmf,
* that we never have to deal with more than a single extent here.
*/
error = ops->iomap_begin(inode, pos, PAGE_SIZE, flags, &iomap);
- if (error)
- return dax_fault_return(error);
+ if (error) {
+ vmf_ret = dax_fault_return(error);
+ goto out;
+ }
if (WARN_ON_ONCE(iomap.offset + iomap.length < pos + PAGE_SIZE)) {
vmf_ret = dax_fault_return(-EIO); /* fs corruption? */
goto finish_iomap;
@@ -1252,6 +1270,8 @@ static int dax_iomap_pte_fault(struct vm_fault *vmf,
*/
ops->iomap_end(inode, pos, PAGE_SIZE, copied, flags, &iomap);
}
+out:
+ trace_dax_pte_fault_done(inode, vmf, vmf_ret);
return vmf_ret;
}
diff --git a/fs/dcache.c b/fs/dcache.c
index 95d71ed..cddf397 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -419,6 +419,8 @@ static void dentry_lru_add(struct dentry *dentry)
{
if (unlikely(!(dentry->d_flags & DCACHE_LRU_LIST)))
d_lru_add(dentry);
+ else if (unlikely(!(dentry->d_flags & DCACHE_REFERENCED)))
+ dentry->d_flags |= DCACHE_REFERENCED;
}
/**
@@ -779,8 +781,6 @@ void dput(struct dentry *dentry)
goto kill_it;
}
- if (!(dentry->d_flags & DCACHE_REFERENCED))
- dentry->d_flags |= DCACHE_REFERENCED;
dentry_lru_add(dentry);
dentry->d_lockref.count--;
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 7fd4ec4..e892ae7 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -199,7 +199,7 @@ static const struct dentry_operations debugfs_dops = {
static int debug_fill_super(struct super_block *sb, void *data, int silent)
{
- static struct tree_descr debug_files[] = {{""}};
+ static const struct tree_descr debug_files[] = {{""}};
struct debugfs_fs_info *fsi;
int err;
diff --git a/fs/exofs/dir.c b/fs/exofs/dir.c
index 42f9a0a..8eeb694 100644
--- a/fs/exofs/dir.c
+++ b/fs/exofs/dir.c
@@ -405,8 +405,7 @@ int exofs_set_link(struct inode *dir, struct exofs_dir_entry *de,
int err;
lock_page(page);
- err = exofs_write_begin(NULL, page->mapping, pos, len,
- AOP_FLAG_UNINTERRUPTIBLE, &page, NULL);
+ err = exofs_write_begin(NULL, page->mapping, pos, len, 0, &page, NULL);
if (err)
EXOFS_ERR("exofs_set_link: exofs_write_begin FAILED => %d\n",
err);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 36de58a..5083bce2 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2393,7 +2393,7 @@ int ext4_mb_alloc_groupinfo(struct super_block *sb, ext4_group_t ngroups)
return 0;
size = roundup_pow_of_two(sizeof(*sbi->s_group_info) * size);
- new_groupinfo = ext4_kvzalloc(size, GFP_KERNEL);
+ new_groupinfo = kvzalloc(size, GFP_KERNEL);
if (!new_groupinfo) {
ext4_msg(sb, KERN_ERR, "can't allocate buddy meta group");
return -ENOMEM;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 96973ee..c90edf0 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2155,7 +2155,7 @@ int ext4_alloc_flex_bg_array(struct super_block *sb, ext4_group_t ngroup)
return 0;
size = roundup_pow_of_two(size * sizeof(struct flex_groups));
- new_groups = ext4_kvzalloc(size, GFP_KERNEL);
+ new_groups = kvzalloc(size, GFP_KERNEL);
if (!new_groups) {
ext4_msg(sb, KERN_ERR, "not enough memory for %d flex groups",
size / (int) sizeof(struct flex_groups));
@@ -3889,7 +3889,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
goto failed_mount;
}
}
- sbi->s_group_desc = ext4_kvmalloc(db_count *
+ sbi->s_group_desc = kvmalloc(db_count *
sizeof(struct buffer_head *),
GFP_KERNEL);
if (sbi->s_group_desc == NULL) {
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index e26999a..2185c7a 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -2071,26 +2071,6 @@ static inline void *f2fs_kmalloc(struct f2fs_sb_info *sbi,
return kmalloc(size, flags);
}
-static inline void *f2fs_kvmalloc(size_t size, gfp_t flags)
-{
- void *ret;
-
- ret = kmalloc(size, flags | __GFP_NOWARN);
- if (!ret)
- ret = __vmalloc(size, flags, PAGE_KERNEL);
- return ret;
-}
-
-static inline void *f2fs_kvzalloc(size_t size, gfp_t flags)
-{
- void *ret;
-
- ret = kzalloc(size, flags | __GFP_NOWARN);
- if (!ret)
- ret = __vmalloc(size, flags | __GFP_ZERO, PAGE_KERNEL);
- return ret;
-}
-
#define get_inode_mode(i) \
((is_inode_flag_set(i, FI_ACL_MODE)) ? \
(F2FS_I(i)->i_acl_mode) : ((i)->i_mode))
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index abb0403..61af721 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1011,11 +1011,11 @@ static int __exchange_data_block(struct inode *src_inode,
while (len) {
olen = min((pgoff_t)4 * ADDRS_PER_BLOCK, len);
- src_blkaddr = f2fs_kvzalloc(sizeof(block_t) * olen, GFP_KERNEL);
+ src_blkaddr = kvzalloc(sizeof(block_t) * olen, GFP_KERNEL);
if (!src_blkaddr)
return -ENOMEM;
- do_replace = f2fs_kvzalloc(sizeof(int) * olen, GFP_KERNEL);
+ do_replace = kvzalloc(sizeof(int) * olen, GFP_KERNEL);
if (!do_replace) {
kvfree(src_blkaddr);
return -ENOMEM;
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 98351a4..4547c5c 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -2652,17 +2652,17 @@ static int init_free_nid_cache(struct f2fs_sb_info *sbi)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
- nm_i->free_nid_bitmap = f2fs_kvzalloc(nm_i->nat_blocks *
+ nm_i->free_nid_bitmap = kvzalloc(nm_i->nat_blocks *
NAT_ENTRY_BITMAP_SIZE, GFP_KERNEL);
if (!nm_i->free_nid_bitmap)
return -ENOMEM;
- nm_i->nat_block_bitmap = f2fs_kvzalloc(nm_i->nat_blocks / 8,
+ nm_i->nat_block_bitmap = kvzalloc(nm_i->nat_blocks / 8,
GFP_KERNEL);
if (!nm_i->nat_block_bitmap)
return -ENOMEM;
- nm_i->free_nid_count = f2fs_kvzalloc(nm_i->nat_blocks *
+ nm_i->free_nid_count = kvzalloc(nm_i->nat_blocks *
sizeof(unsigned short), GFP_KERNEL);
if (!nm_i->free_nid_count)
return -ENOMEM;
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index de31030..9684585 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -2834,13 +2834,13 @@ static int build_sit_info(struct f2fs_sb_info *sbi)
SM_I(sbi)->sit_info = sit_i;
- sit_i->sentries = f2fs_kvzalloc(MAIN_SEGS(sbi) *
+ sit_i->sentries = kvzalloc(MAIN_SEGS(sbi) *
sizeof(struct seg_entry), GFP_KERNEL);
if (!sit_i->sentries)
return -ENOMEM;
bitmap_size = f2fs_bitmap_size(MAIN_SEGS(sbi));
- sit_i->dirty_sentries_bitmap = f2fs_kvzalloc(bitmap_size, GFP_KERNEL);
+ sit_i->dirty_sentries_bitmap = kvzalloc(bitmap_size, GFP_KERNEL);
if (!sit_i->dirty_sentries_bitmap)
return -ENOMEM;
@@ -2873,7 +2873,7 @@ static int build_sit_info(struct f2fs_sb_info *sbi)
return -ENOMEM;
if (sbi->segs_per_sec > 1) {
- sit_i->sec_entries = f2fs_kvzalloc(MAIN_SECS(sbi) *
+ sit_i->sec_entries = kvzalloc(MAIN_SECS(sbi) *
sizeof(struct sec_entry), GFP_KERNEL);
if (!sit_i->sec_entries)
return -ENOMEM;
@@ -2906,7 +2906,7 @@ static int build_sit_info(struct f2fs_sb_info *sbi)
sit_i->dirty_sentries = 0;
sit_i->sents_per_block = SIT_ENTRY_PER_BLOCK;
sit_i->elapsed_time = le64_to_cpu(sbi->ckpt->elapsed_time);
- sit_i->mounted_time = CURRENT_TIME_SEC.tv_sec;
+ sit_i->mounted_time = ktime_get_real_seconds();
mutex_init(&sit_i->sentry_lock);
return 0;
}
@@ -2924,12 +2924,12 @@ static int build_free_segmap(struct f2fs_sb_info *sbi)
SM_I(sbi)->free_info = free_i;
bitmap_size = f2fs_bitmap_size(MAIN_SEGS(sbi));
- free_i->free_segmap = f2fs_kvmalloc(bitmap_size, GFP_KERNEL);
+ free_i->free_segmap = kvmalloc(bitmap_size, GFP_KERNEL);
if (!free_i->free_segmap)
return -ENOMEM;
sec_bitmap_size = f2fs_bitmap_size(MAIN_SECS(sbi));
- free_i->free_secmap = f2fs_kvmalloc(sec_bitmap_size, GFP_KERNEL);
+ free_i->free_secmap = kvmalloc(sec_bitmap_size, GFP_KERNEL);
if (!free_i->free_secmap)
return -ENOMEM;
@@ -3109,7 +3109,7 @@ static int init_victim_secmap(struct f2fs_sb_info *sbi)
struct dirty_seglist_info *dirty_i = DIRTY_I(sbi);
unsigned int bitmap_size = f2fs_bitmap_size(MAIN_SECS(sbi));
- dirty_i->victim_secmap = f2fs_kvzalloc(bitmap_size, GFP_KERNEL);
+ dirty_i->victim_secmap = kvzalloc(bitmap_size, GFP_KERNEL);
if (!dirty_i->victim_secmap)
return -ENOMEM;
return 0;
@@ -3131,7 +3131,7 @@ static int build_dirty_segmap(struct f2fs_sb_info *sbi)
bitmap_size = f2fs_bitmap_size(MAIN_SEGS(sbi));
for (i = 0; i < NR_DIRTY_TYPE; i++) {
- dirty_i->dirty_segmap[i] = f2fs_kvzalloc(bitmap_size, GFP_KERNEL);
+ dirty_i->dirty_segmap[i] = kvzalloc(bitmap_size, GFP_KERNEL);
if (!dirty_i->dirty_segmap[i])
return -ENOMEM;
}
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 10bf05d..010f336 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -712,8 +712,9 @@ static inline void set_to_next_sit(struct sit_info *sit_i, unsigned int start)
static inline unsigned long long get_mtime(struct f2fs_sb_info *sbi)
{
struct sit_info *sit_i = SIT_I(sbi);
- return sit_i->elapsed_time + CURRENT_TIME_SEC.tv_sec -
- sit_i->mounted_time;
+ time64_t now = ktime_get_real_seconds();
+
+ return sit_i->elapsed_time + now - sit_i->mounted_time;
}
static inline void set_summary(struct f2fs_summary *sum, nid_t nid,
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 8bd81c2..f4e7267 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -899,16 +899,10 @@ static int __init fcntl_init(void)
* Exceptions: O_NONBLOCK is a two bit define on parisc; O_NDELAY
* is defined as O_NONBLOCK on some platforms and not on others.
*/
- BUILD_BUG_ON(21 - 1 /* for O_RDONLY being 0 */ != HWEIGHT32(
- O_RDONLY | O_WRONLY | O_RDWR |
- O_CREAT | O_EXCL | O_NOCTTY |
- O_TRUNC | O_APPEND | /* O_NONBLOCK | */
- __O_SYNC | O_DSYNC | FASYNC |
- O_DIRECT | O_LARGEFILE | O_DIRECTORY |
- O_NOFOLLOW | O_NOATIME | O_CLOEXEC |
- __FMODE_EXEC | O_PATH | __O_TMPFILE |
- __FMODE_NONOTIFY
- ));
+ BUILD_BUG_ON(21 - 1 /* for O_RDONLY being 0 */ !=
+ HWEIGHT32(
+ (VALID_OPEN_FLAGS & ~(O_NONBLOCK | O_NDELAY)) |
+ __FMODE_EXEC | __FMODE_NONOTIFY));
fasync_cache = kmem_cache_create("fasync_cache",
sizeof(struct fasync_struct), 0, SLAB_PANIC, NULL);
diff --git a/fs/file.c b/fs/file.c
index ad6f094..1c2972e 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -42,7 +42,7 @@ static void *alloc_fdmem(size_t size)
if (data != NULL)
return data;
}
- return __vmalloc(size, GFP_KERNEL_ACCOUNT | __GFP_HIGHMEM, PAGE_KERNEL);
+ return __vmalloc(size, GFP_KERNEL_ACCOUNT, PAGE_KERNEL);
}
static void __free_fdtable(struct fdtable *fdt)
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index 6e22748..b9ea99c 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -292,7 +292,7 @@ void fuse_ctl_remove_conn(struct fuse_conn *fc)
static int fuse_ctl_fill_super(struct super_block *sb, void *data, int silent)
{
- struct tree_descr empty_descr = {""};
+ static const struct tree_descr empty_descr = {""};
struct fuse_conn *fc;
int err;
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 3814a60..4d810be 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1072,7 +1072,7 @@ static int sweep_bh_for_rgrps(struct gfs2_inode *ip, struct gfs2_holder *rd_gh,
/* Every transaction boundary, we rewrite the dinode
to keep its di_blocks current in case of failure. */
ip->i_inode.i_mtime = ip->i_inode.i_ctime =
- CURRENT_TIME;
+ current_time(&ip->i_inode);
gfs2_trans_add_meta(ip->i_gl, dibh);
gfs2_dinode_out(ip, dibh->b_data);
up_write(&ip->i_rw_mutex);
@@ -1293,7 +1293,7 @@ static int trunc_dealloc(struct gfs2_inode *ip, u64 newsize)
gfs2_statfs_change(sdp, 0, +btotal, 0);
gfs2_quota_change(ip, -(s64)btotal, ip->i_inode.i_uid,
ip->i_inode.i_gid);
- ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME;
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = current_time(&ip->i_inode);
gfs2_trans_add_meta(ip->i_gl, dibh);
gfs2_dinode_out(ip, dibh->b_data);
up_write(&ip->i_rw_mutex);
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index e33a0d3..5d01826 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -485,8 +485,8 @@ void hfs_file_truncate(struct inode *inode)
/* XXX: Can use generic_cont_expand? */
size = inode->i_size - 1;
- res = pagecache_write_begin(NULL, mapping, size+1, 0,
- AOP_FLAG_UNINTERRUPTIBLE, &page, &fsdata);
+ res = pagecache_write_begin(NULL, mapping, size+1, 0, 0,
+ &page, &fsdata);
if (!res) {
res = pagecache_write_end(NULL, mapping, size+1, 0, 0,
page, fsdata);
diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index feca524..a3eb640 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -545,9 +545,8 @@ void hfsplus_file_truncate(struct inode *inode)
void *fsdata;
loff_t size = inode->i_size;
- res = pagecache_write_begin(NULL, mapping, size, 0,
- AOP_FLAG_UNINTERRUPTIBLE,
- &page, &fsdata);
+ res = pagecache_write_begin(NULL, mapping, size, 0, 0,
+ &page, &fsdata);
if (res)
return;
res = pagecache_write_end(NULL, mapping, size,
diff --git a/fs/inode.c b/fs/inode.c
index 131b2bc..db59147 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -119,7 +119,7 @@ static int no_open(struct inode *inode, struct file *file)
}
/**
- * inode_init_always - perform inode structure intialisation
+ * inode_init_always - perform inode structure initialisation
* @sb: superblock inode belongs to
* @inode: inode to initialise
*
@@ -402,6 +402,8 @@ static void inode_lru_list_add(struct inode *inode)
{
if (list_lru_add(&inode->i_sb->s_inode_lru, &inode->i_lru))
this_cpu_inc(nr_unused);
+ else
+ inode->i_state |= I_REFERENCED;
}
/*
@@ -1489,7 +1491,6 @@ static void iput_final(struct inode *inode)
drop = generic_drop_inode(inode);
if (!drop && (sb->s_flags & MS_ACTIVE)) {
- inode->i_state |= I_REFERENCED;
inode_add_lru(inode);
spin_unlock(&inode->i_lock);
return;
diff --git a/fs/internal.h b/fs/internal.h
index 076751d..9676fe1 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -126,8 +126,6 @@ static inline bool atime_needs_update_rcu(const struct path *path,
return __atime_needs_update(path, inode, true);
}
-extern bool atime_needs_update_rcu(const struct path *, struct inode *);
-
/*
* fs-writeback.c
*/
diff --git a/fs/iomap.c b/fs/iomap.c
index 1faabe0..4b10892 100644
--- a/fs/iomap.c
+++ b/fs/iomap.c
@@ -158,12 +158,6 @@ iomap_write_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
ssize_t written = 0;
unsigned int flags = AOP_FLAG_NOFS;
- /*
- * Copies from kernel address space cannot fail (NFSD is a big user).
- */
- if (!iter_is_iovec(i))
- flags |= AOP_FLAG_UNINTERRUPTIBLE;
-
do {
struct page *page;
unsigned long offset; /* Offset into pagecache page */
@@ -291,8 +285,7 @@ iomap_dirty_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
return PTR_ERR(rpage);
status = iomap_write_begin(inode, pos, bytes,
- AOP_FLAG_NOFS | AOP_FLAG_UNINTERRUPTIBLE,
- &page, iomap);
+ AOP_FLAG_NOFS, &page, iomap);
put_page(rpage);
if (unlikely(status))
return status;
@@ -343,8 +336,8 @@ static int iomap_zero(struct inode *inode, loff_t pos, unsigned offset,
struct page *page;
int status;
- status = iomap_write_begin(inode, pos, bytes,
- AOP_FLAG_UNINTERRUPTIBLE | AOP_FLAG_NOFS, &page, iomap);
+ status = iomap_write_begin(inode, pos, bytes, AOP_FLAG_NOFS, &page,
+ iomap);
if (status)
return status;
diff --git a/fs/libfs.c b/fs/libfs.c
index a8b62e5..a043953 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -507,7 +507,7 @@ EXPORT_SYMBOL(simple_write_end);
* to pass it an appropriate max_reserved value to avoid collisions.
*/
int simple_fill_super(struct super_block *s, unsigned long magic,
- struct tree_descr *files)
+ const struct tree_descr *files)
{
struct inode *inode;
struct dentry *root;
diff --git a/fs/namei.c b/fs/namei.c
index 9a7f8bd..7286f87 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -4766,7 +4766,7 @@ int __page_symlink(struct inode *inode, const char *symname, int len, int nofs)
struct page *page;
void *fsdata;
int err;
- unsigned int flags = AOP_FLAG_UNINTERRUPTIBLE;
+ unsigned int flags = 0;
if (nofs)
flags |= AOP_FLAG_NOFS;
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 8bf8f66..6493df6 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1146,7 +1146,7 @@ static ssize_t write_v4_end_grace(struct file *file, char *buf, size_t size)
static int nfsd_fill_super(struct super_block * sb, void * data, int silent)
{
- static struct tree_descr nfsd_files[] = {
+ static const struct tree_descr nfsd_files[] = {
[NFSD_List] = {"exports", &exports_nfsd_operations, S_IRUGO},
[NFSD_Export_features] = {"export_features",
&export_features_operations, S_IRUGO},
diff --git a/fs/nsfs.c b/fs/nsfs.c
index 323f492..f3db56e 100644
--- a/fs/nsfs.c
+++ b/fs/nsfs.c
@@ -196,9 +196,11 @@ int ns_get_name(char *buf, size_t size, struct task_struct *task,
{
struct ns_common *ns;
int res = -ENOENT;
+ const char *name;
ns = ns_ops->get(task);
if (ns) {
- res = snprintf(buf, size, "%s:[%u]", ns_ops->name, ns->inum);
+ name = ns_ops->real_ns_name ? : ns_ops->name;
+ res = snprintf(buf, size, "%s:[%u]", name, ns->inum);
ns_ops->put(ns);
}
return res;
diff --git a/fs/open.c b/fs/open.c
index 4d23f72..373787a 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -900,6 +900,12 @@ static inline int build_open_flags(int flags, umode_t mode, struct open_flags *o
int lookup_flags = 0;
int acc_mode = ACC_MODE(flags);
+ /*
+ * Clear out all open flags we don't know about so that we don't report
+ * them in fcntl(F_GETFD) or similar interfaces.
+ */
+ flags &= VALID_OPEN_FLAGS;
+
if (flags & (O_CREAT | __O_TMPFILE))
op->mode = (mode & S_IALLUGO) | S_IFREG;
else
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 9e3ac5c..45f6bf6 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -821,10 +821,7 @@ static ssize_t mem_rw(struct file *file, char __user *buf,
if (!mmget_not_zero(mm))
goto free;
- /* Maybe we should limit FOLL_FORCE to actual ptrace users? */
- flags = FOLL_FORCE;
- if (write)
- flags |= FOLL_WRITE;
+ flags = write ? FOLL_WRITE : 0;
while (count > 0) {
int this_len = min_t(int, count, PAGE_SIZE);
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 2cc7a80..e250910 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -58,7 +58,7 @@ static struct inode *proc_alloc_inode(struct super_block *sb)
struct proc_inode *ei;
struct inode *inode;
- ei = (struct proc_inode *)kmem_cache_alloc(proc_inode_cachep, GFP_KERNEL);
+ ei = kmem_cache_alloc(proc_inode_cachep, GFP_KERNEL);
if (!ei)
return NULL;
ei->pid = NULL;
diff --git a/fs/proc/namespaces.c b/fs/proc/namespaces.c
index 766f0c6..3803b24 100644
--- a/fs/proc/namespaces.c
+++ b/fs/proc/namespaces.c
@@ -23,6 +23,7 @@ static const struct proc_ns_operations *ns_entries[] = {
#endif
#ifdef CONFIG_PID_NS
&pidns_operations,
+ &pidns_for_children_operations,
#endif
#ifdef CONFIG_USER_NS
&userns_operations,
diff --git a/fs/reiserfs/item_ops.c b/fs/reiserfs/item_ops.c
index aca73dd..e3c558d 100644
--- a/fs/reiserfs/item_ops.c
+++ b/fs/reiserfs/item_ops.c
@@ -724,18 +724,18 @@ static void errcatch_print_vi(struct virtual_item *vi)
}
static struct item_operations errcatch_ops = {
- errcatch_bytes_number,
- errcatch_decrement_key,
- errcatch_is_left_mergeable,
- errcatch_print_item,
- errcatch_check_item,
+ .bytes_number = errcatch_bytes_number,
+ .decrement_key = errcatch_decrement_key,
+ .is_left_mergeable = errcatch_is_left_mergeable,
+ .print_item = errcatch_print_item,
+ .check_item = errcatch_check_item,
- errcatch_create_vi,
- errcatch_check_left,
- errcatch_check_right,
- errcatch_part_size,
- errcatch_unit_num,
- errcatch_print_vi
+ .create_vi = errcatch_create_vi,
+ .check_left = errcatch_check_left,
+ .check_right = errcatch_check_right,
+ .part_size = errcatch_part_size,
+ .unit_num = errcatch_unit_num,
+ .print_vi = errcatch_print_vi
};
#if ! (TYPE_STAT_DATA == 0 && TYPE_INDIRECT == 1 && TYPE_DIRECT == 2 && TYPE_DIRENTRY == 3)
diff --git a/fs/select.c b/fs/select.c
index bd4b2cc..d6c652a 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -633,10 +633,7 @@ int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
goto out_nofds;
alloc_size = 6 * size;
- bits = kmalloc(alloc_size, GFP_KERNEL|__GFP_NOWARN);
- if (!bits && alloc_size > PAGE_SIZE)
- bits = vmalloc(alloc_size);
-
+ bits = kvmalloc(alloc_size, GFP_KERNEL);
if (!bits)
goto out_nofds;
}
diff --git a/fs/seq_file.c b/fs/seq_file.c
index ca69fb9..dc7c2be 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -25,21 +25,7 @@ static void seq_set_overflow(struct seq_file *m)
static void *seq_buf_alloc(unsigned long size)
{
- void *buf;
- gfp_t gfp = GFP_KERNEL;
-
- /*
- * For high order allocations, use __GFP_NORETRY to avoid oom-killing -
- * it's better to fall back to vmalloc() than to kill things. For small
- * allocations, just use GFP_KERNEL which will oom kill, thus no need
- * for vmalloc fallback.
- */
- if (size > PAGE_SIZE)
- gfp |= __GFP_NORETRY | __GFP_NOWARN;
- buf = kmalloc(size, gfp);
- if (!buf && size > PAGE_SIZE)
- buf = vmalloc(size);
- return buf;
+ return kvmalloc(size, GFP_KERNEL);
}
/**
diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c
index 21d36d2..328e89c 100644
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -266,7 +266,7 @@ static const struct super_operations tracefs_super_operations = {
static int trace_fill_super(struct super_block *sb, void *data, int silent)
{
- static struct tree_descr trace_files[] = {{""}};
+ static const struct tree_descr trace_files[] = {{""}};
struct tracefs_fs_info *fsi;
int err;
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index 8049851..566079d 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -121,7 +121,7 @@ struct inode *ubifs_new_inode(struct ubifs_info *c, struct inode *dir,
inode_init_owner(inode, dir, mode);
inode->i_mtime = inode->i_atime = inode->i_ctime =
- ubifs_current_time(inode);
+ current_time(inode);
inode->i_mapping->nrpages = 0;
switch (mode & S_IFMT) {
@@ -766,7 +766,7 @@ static int ubifs_link(struct dentry *old_dentry, struct inode *dir,
inc_nlink(inode);
ihold(inode);
- inode->i_ctime = ubifs_current_time(inode);
+ inode->i_ctime = current_time(inode);
dir->i_size += sz_change;
dir_ui->ui_size = dir->i_size;
dir->i_mtime = dir->i_ctime = inode->i_ctime;
@@ -841,7 +841,7 @@ static int ubifs_unlink(struct inode *dir, struct dentry *dentry)
}
lock_2_inodes(dir, inode);
- inode->i_ctime = ubifs_current_time(dir);
+ inode->i_ctime = current_time(dir);
drop_nlink(inode);
dir->i_size -= sz_change;
dir_ui->ui_size = dir->i_size;
@@ -945,7 +945,7 @@ static int ubifs_rmdir(struct inode *dir, struct dentry *dentry)
}
lock_2_inodes(dir, inode);
- inode->i_ctime = ubifs_current_time(dir);
+ inode->i_ctime = current_time(dir);
clear_nlink(inode);
drop_nlink(dir);
dir->i_size -= sz_change;
@@ -1422,7 +1422,7 @@ static int do_rename(struct inode *old_dir, struct dentry *old_dentry,
* Like most other Unix systems, set the @i_ctime for inodes on a
* rename.
*/
- time = ubifs_current_time(old_dir);
+ time = current_time(old_dir);
old_inode->i_ctime = time;
/* We must adjust parent link count when renaming directories */
@@ -1595,7 +1595,7 @@ static int ubifs_xrename(struct inode *old_dir, struct dentry *old_dentry,
lock_4_inodes(old_dir, new_dir, NULL, NULL);
- time = ubifs_current_time(old_dir);
+ time = current_time(old_dir);
fst_inode->i_ctime = time;
snd_inode->i_ctime = time;
old_dir->i_mtime = old_dir->i_ctime = time;
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index d9ae86f..2cda3d6 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -1196,7 +1196,7 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
mutex_lock(&ui->ui_mutex);
ui->ui_size = inode->i_size;
/* Truncation changes inode [mc]time */
- inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
+ inode->i_mtime = inode->i_ctime = current_time(inode);
/* Other attributes may be changed at the same time as well */
do_attr_changes(inode, attr);
err = ubifs_jnl_truncate(c, inode, old_size, new_size);
@@ -1243,7 +1243,7 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode,
mutex_lock(&ui->ui_mutex);
if (attr->ia_valid & ATTR_SIZE) {
/* Truncation changes inode [mc]time */
- inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
+ inode->i_mtime = inode->i_ctime = current_time(inode);
/* 'truncate_setsize()' changed @i_size, update @ui_size */
ui->ui_size = inode->i_size;
}
@@ -1420,7 +1420,7 @@ int ubifs_update_time(struct inode *inode, struct timespec *time,
*/
static int update_mctime(struct inode *inode)
{
- struct timespec now = ubifs_current_time(inode);
+ struct timespec now = current_time(inode);
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_info *c = inode->i_sb->s_fs_info;
@@ -1434,7 +1434,7 @@ static int update_mctime(struct inode *inode)
return err;
mutex_lock(&ui->ui_mutex);
- inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
+ inode->i_mtime = inode->i_ctime = current_time(inode);
release = ui->dirty;
mark_inode_dirty_sync(inode);
mutex_unlock(&ui->ui_mutex);
@@ -1511,7 +1511,7 @@ static int ubifs_vm_page_mkwrite(struct vm_fault *vmf)
struct page *page = vmf->page;
struct inode *inode = file_inode(vmf->vma->vm_file);
struct ubifs_info *c = inode->i_sb->s_fs_info;
- struct timespec now = ubifs_current_time(inode);
+ struct timespec now = current_time(inode);
struct ubifs_budget_req req = { .new_page = 1 };
int err, update_time;
@@ -1579,7 +1579,7 @@ static int ubifs_vm_page_mkwrite(struct vm_fault *vmf)
struct ubifs_inode *ui = ubifs_inode(inode);
mutex_lock(&ui->ui_mutex);
- inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
+ inode->i_mtime = inode->i_ctime = current_time(inode);
release = ui->dirty;
mark_inode_dirty_sync(inode);
mutex_unlock(&ui->ui_mutex);
diff --git a/fs/ubifs/ioctl.c b/fs/ubifs/ioctl.c
index da519ba..12b9eb50 100644
--- a/fs/ubifs/ioctl.c
+++ b/fs/ubifs/ioctl.c
@@ -126,7 +126,7 @@ static int setflags(struct inode *inode, int flags)
ui->flags = ioctl2ubifs(flags);
ubifs_set_inode_flags(inode);
- inode->i_ctime = ubifs_current_time(inode);
+ inode->i_ctime = current_time(inode);
release = ui->dirty;
mark_inode_dirty_sync(inode);
mutex_unlock(&ui->ui_mutex);
diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h
index 8ece6ca..caf83d6 100644
--- a/fs/ubifs/misc.h
+++ b/fs/ubifs/misc.h
@@ -225,16 +225,6 @@ static inline void *ubifs_idx_key(const struct ubifs_info *c,
}
/**
- * ubifs_current_time - round current time to time granularity.
- * @inode: inode
- */
-static inline struct timespec ubifs_current_time(struct inode *inode)
-{
- return (inode->i_sb->s_time_gran < NSEC_PER_SEC) ?
- current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
-}
-
-/**
* ubifs_tnc_lookup - look up a file-system node.
* @c: UBIFS file-system description object
* @key: node key to lookup
diff --git a/fs/ubifs/sb.c b/fs/ubifs/sb.c
index 7f1ead2..8c25081 100644
--- a/fs/ubifs/sb.c
+++ b/fs/ubifs/sb.c
@@ -84,6 +84,8 @@ static int create_default_filesystem(struct ubifs_info *c)
int min_leb_cnt = UBIFS_MIN_LEB_CNT;
long long tmp64, main_bytes;
__le64 tmp_le64;
+ __le32 tmp_le32;
+ struct timespec ts;
/* Some functions called from here depend on the @c->key_len filed */
c->key_len = UBIFS_SK_LEN;
@@ -298,13 +300,17 @@ static int create_default_filesystem(struct ubifs_info *c)
ino->ch.node_type = UBIFS_INO_NODE;
ino->creat_sqnum = cpu_to_le64(++c->max_sqnum);
ino->nlink = cpu_to_le32(2);
- tmp_le64 = cpu_to_le64(CURRENT_TIME_SEC.tv_sec);
+
+ ktime_get_real_ts(&ts);
+ ts = timespec_trunc(ts, DEFAULT_TIME_GRAN);
+ tmp_le64 = cpu_to_le64(ts.tv_sec);
ino->atime_sec = tmp_le64;
ino->ctime_sec = tmp_le64;
ino->mtime_sec = tmp_le64;
- ino->atime_nsec = 0;
- ino->ctime_nsec = 0;
- ino->mtime_nsec = 0;
+ tmp_le32 = cpu_to_le32(ts.tv_nsec);
+ ino->atime_nsec = tmp_le32;
+ ino->ctime_nsec = tmp_le32;
+ ino->mtime_nsec = tmp_le32;
ino->mode = cpu_to_le32(S_IFDIR | S_IRUGO | S_IWUSR | S_IXUGO);
ino->size = cpu_to_le64(UBIFS_INO_NODE_SZ);
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index efe00fc..3e53fdb 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -152,7 +152,7 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
ui->data_len = size;
mutex_lock(&host_ui->ui_mutex);
- host->i_ctime = ubifs_current_time(host);
+ host->i_ctime = current_time(host);
host_ui->xattr_cnt += 1;
host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm));
host_ui->xattr_size += CALC_XATTR_BYTES(size);
@@ -234,7 +234,7 @@ static int change_xattr(struct ubifs_info *c, struct inode *host,
mutex_unlock(&ui->ui_mutex);
mutex_lock(&host_ui->ui_mutex);
- host->i_ctime = ubifs_current_time(host);
+ host->i_ctime = current_time(host);
host_ui->xattr_size -= CALC_XATTR_BYTES(old_size);
host_ui->xattr_size += CALC_XATTR_BYTES(size);
@@ -488,7 +488,7 @@ static int remove_xattr(struct ubifs_info *c, struct inode *host,
return err;
mutex_lock(&host_ui->ui_mutex);
- host->i_ctime = ubifs_current_time(host);
+ host->i_ctime = current_time(host);
host_ui->xattr_cnt -= 1;
host_ui->xattr_size -= CALC_DENT_SIZE(fname_len(nm));
host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
diff --git a/fs/ufs/ialloc.c b/fs/ufs/ialloc.c
index 9774555..d1dd8cc 100644
--- a/fs/ufs/ialloc.c
+++ b/fs/ufs/ialloc.c
@@ -176,6 +176,7 @@ struct inode *ufs_new_inode(struct inode *dir, umode_t mode)
struct ufs_cg_private_info * ucpi;
struct ufs_cylinder_group * ucg;
struct inode * inode;
+ struct timespec64 ts;
unsigned cg, bit, i, j, start;
struct ufs_inode_info *ufsi;
int err = -ENOSPC;
@@ -323,8 +324,9 @@ struct inode *ufs_new_inode(struct inode *dir, umode_t mode)
lock_buffer(bh);
ufs2_inode = (struct ufs2_inode *)bh->b_data;
ufs2_inode += ufs_inotofsbo(inode->i_ino);
- ufs2_inode->ui_birthtime = cpu_to_fs64(sb, CURRENT_TIME.tv_sec);
- ufs2_inode->ui_birthnsec = cpu_to_fs32(sb, CURRENT_TIME.tv_nsec);
+ ktime_get_real_ts64(&ts);
+ ufs2_inode->ui_birthtime = cpu_to_fs64(sb, ts.tv_sec);
+ ufs2_inode->ui_birthnsec = cpu_to_fs32(sb, ts.tv_nsec);
mark_buffer_dirty(bh);
unlock_buffer(bh);
if (sb->s_flags & MS_SYNCHRONOUS)
diff --git a/fs/xattr.c b/fs/xattr.c
index 7e3317c..464c94b 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -431,12 +431,9 @@ setxattr(struct dentry *d, const char __user *name, const void __user *value,
if (size) {
if (size > XATTR_SIZE_MAX)
return -E2BIG;
- kvalue = kmalloc(size, GFP_KERNEL | __GFP_NOWARN);
- if (!kvalue) {
- kvalue = vmalloc(size);
- if (!kvalue)
- return -ENOMEM;
- }
+ kvalue = kvmalloc(size, GFP_KERNEL);
+ if (!kvalue)
+ return -ENOMEM;
if (copy_from_user(kvalue, value, size)) {
error = -EFAULT;
goto out;
@@ -528,12 +525,9 @@ getxattr(struct dentry *d, const char __user *name, void __user *value,
if (size) {
if (size > XATTR_SIZE_MAX)
size = XATTR_SIZE_MAX;
- kvalue = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
- if (!kvalue) {
- kvalue = vmalloc(size);
- if (!kvalue)
- return -ENOMEM;
- }
+ kvalue = kvzalloc(size, GFP_KERNEL);
+ if (!kvalue)
+ return -ENOMEM;
}
error = vfs_getxattr(d, kname, kvalue, size);
@@ -611,12 +605,9 @@ listxattr(struct dentry *d, char __user *list, size_t size)
if (size) {
if (size > XATTR_LIST_MAX)
size = XATTR_LIST_MAX;
- klist = kmalloc(size, __GFP_NOWARN | GFP_KERNEL);
- if (!klist) {
- klist = vmalloc(size);
- if (!klist)
- return -ENOMEM;
- }
+ klist = kvmalloc(size, GFP_KERNEL);
+ if (!klist)
+ return -ENOMEM;
}
error = vfs_listxattr(d, klist, size);
diff --git a/fs/xfs/kmem.c b/fs/xfs/kmem.c
index 780fc89..393b684 100644
--- a/fs/xfs/kmem.c
+++ b/fs/xfs/kmem.c
@@ -67,7 +67,7 @@ kmem_zalloc_large(size_t size, xfs_km_flags_t flags)
nofs_flag = memalloc_nofs_save();
lflags = kmem_flags_convert(flags);
- ptr = __vmalloc(size, lflags | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+ ptr = __vmalloc(size, lflags | __GFP_ZERO, PAGE_KERNEL);
if (flags & KM_NOFS)
memalloc_nofs_restore(nofs_flag);
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 4a98762..cd0b077 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -3796,7 +3796,7 @@ xlog_recover_bud_pass2(
* This routine is called when an inode create format structure is found in a
* committed transaction in the log. It's purpose is to initialise the inodes
* being allocated on disk. This requires us to get inode cluster buffers that
- * match the range to be intialised, stamped with inode templates and written
+ * match the range to be initialised, stamped with inode templates and written
* by delayed write so that subsequent modifications will hit the cached buffer
* and only need writing out at the end of recovery.
*/
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 2fc678e..73b82ac 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -577,7 +577,7 @@ struct acpi_pci_root {
bool acpi_dma_supported(struct acpi_device *adev);
enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
-void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr);
+int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr);
void acpi_dma_deconfigure(struct device *dev);
struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
diff --git a/include/asm-generic/set_memory.h b/include/asm-generic/set_memory.h
new file mode 100644
index 0000000..83e81f8
--- /dev/null
+++ b/include/asm-generic/set_memory.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_SET_MEMORY_H
+#define __ASM_SET_MEMORY_H
+
+/*
+ * Functions to change memory attributes.
+ */
+int set_memory_ro(unsigned long addr, int numpages);
+int set_memory_rw(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
+int set_memory_nx(unsigned long addr, int numpages);
+
+#endif
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 3558f4e..314a0b9 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -566,7 +566,6 @@
IRQCHIP_OF_MATCH_TABLE() \
ACPI_PROBE_TABLE(irqchip) \
ACPI_PROBE_TABLE(clksrc) \
- ACPI_PROBE_TABLE(iort) \
EARLYCON_TABLE()
#define INIT_TEXT \
diff --git a/include/drm/drm_mem_util.h b/include/drm/drm_mem_util.h
index 70d4e22..d0f6cf2 100644
--- a/include/drm/drm_mem_util.h
+++ b/include/drm/drm_mem_util.h
@@ -37,8 +37,7 @@ static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
if (size * nmemb <= PAGE_SIZE)
return kcalloc(nmemb, size, GFP_KERNEL);
- return __vmalloc(size * nmemb,
- GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+ return vzalloc(size * nmemb);
}
/* Modeled after cairo's malloc_ab, it's like calloc but without the zeroing. */
@@ -50,8 +49,7 @@ static __inline__ void *drm_malloc_ab(size_t nmemb, size_t size)
if (size * nmemb <= PAGE_SIZE)
return kmalloc(nmemb * size, GFP_KERNEL);
- return __vmalloc(size * nmemb,
- GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
+ return vmalloc(size * nmemb);
}
static __inline__ void *drm_malloc_gfp(size_t nmemb, size_t size, gfp_t gfp)
@@ -69,8 +67,7 @@ static __inline__ void *drm_malloc_gfp(size_t nmemb, size_t size, gfp_t gfp)
return ptr;
}
- return __vmalloc(size * nmemb,
- gfp | __GFP_HIGHMEM, PAGE_KERNEL);
+ return __vmalloc(size * nmemb, gfp, PAGE_KERNEL);
}
static __inline void drm_free_large(void *ptr)
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index 63f4c2c..3190e30 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -10,6 +10,7 @@
#define CLKID_FCLK_DIV2 4
#define CLKID_FCLK_DIV3 5
#define CLKID_FCLK_DIV4 6
+#define CLKID_GP0_PLL 9
#define CLKID_CLK81 12
#define CLKID_MPLL2 15
#define CLKID_I2C 22
@@ -17,6 +18,10 @@
#define CLKID_RNG0 25
#define CLKID_SPI 34
#define CLKID_ETH 36
+#define CLKID_AIU_GLUE 38
+#define CLKID_I2S_OUT 40
+#define CLKID_MIXER_IFACE 44
+#define CLKID_AIU 47
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
@@ -25,11 +30,17 @@
#define CLKID_USB0_DDR_BRIDGE 65
#define CLKID_SANA 69
#define CLKID_GCLK_VENCI_INT0 77
+#define CLKID_AOCLK_GATE 80
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96
#define CLKID_SAR_ADC_CLK 97
#define CLKID_SAR_ADC_SEL 98
+#define CLKID_MALI_0_SEL 100
+#define CLKID_MALI_0 102
+#define CLKID_MALI_1_SEL 103
+#define CLKID_MALI_1 105
+#define CLKID_MALI 106
#endif /* __GXBB_CLKC_H */
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index ce09915..bc256d3 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -29,6 +29,9 @@
#define R7S72100_CLK_OSTM0 1
#define R7S72100_CLK_OSTM1 0
+/* MSTP6 */
+#define R7S72100_CLK_RTC 0
+
/* MSTP7 */
#define R7S72100_CLK_ETHER 4
@@ -49,7 +52,9 @@
#define R7S72100_CLK_SPI4 3
/* MSTP12 */
-#define R7S72100_CLK_SDHI0 3
-#define R7S72100_CLK_SDHI1 2
+#define R7S72100_CLK_SDHI00 3
+#define R7S72100_CLK_SDHI01 2
+#define R7S72100_CLK_SDHI10 1
+#define R7S72100_CLK_SDHI11 0
#endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */
diff --git a/include/dt-bindings/clock/r8a73a4-clock.h b/include/dt-bindings/clock/r8a73a4-clock.h
index dd11ecd..4b36681 100644
--- a/include/dt-bindings/clock/r8a73a4-clock.h
+++ b/include/dt-bindings/clock/r8a73a4-clock.h
@@ -54,6 +54,7 @@
#define R8A73A4_CLK_IIC3 11
#define R8A73A4_CLK_IIC4 10
#define R8A73A4_CLK_IIC5 9
+#define R8A73A4_CLK_INTC_SYS 8
#define R8A73A4_CLK_IRQC 7
/* MSTP5 */
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index fa5e8da..20641fa6 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -82,6 +82,7 @@
/* MSTP4 */
#define R8A7790_CLK_IRQC 7
+#define R8A7790_CLK_INTC_SYS 8
/* MSTP5 */
#define R8A7790_CLK_AUDIO_DMAC1 1
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index ffa1137..adc50dc 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -72,6 +72,7 @@
/* MSTP4 */
#define R8A7791_CLK_IRQC 7
+#define R8A7791_CLK_INTC_SYS 8
/* MSTP5 */
#define R8A7791_CLK_AUDIO_DMAC1 1
diff --git a/include/dt-bindings/clock/r8a7792-clock.h b/include/dt-bindings/clock/r8a7792-clock.h
index 9a8b392..5be90bc 100644
--- a/include/dt-bindings/clock/r8a7792-clock.h
+++ b/include/dt-bindings/clock/r8a7792-clock.h
@@ -17,7 +17,6 @@
#define R8A7792_CLK_PLL3 3
#define R8A7792_CLK_LB 4
#define R8A7792_CLK_QSPI 5
-#define R8A7792_CLK_Z 6
/* MSTP0 */
#define R8A7792_CLK_MSIOF0 0
@@ -45,6 +44,7 @@
/* MSTP4 */
#define R8A7792_CLK_IRQC 7
+#define R8A7792_CLK_INTC_SYS 8
/* MSTP5 */
#define R8A7792_CLK_AUDIO_DMAC0 2
diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h
index efcbc59..7318d45 100644
--- a/include/dt-bindings/clock/r8a7793-clock.h
+++ b/include/dt-bindings/clock/r8a7793-clock.h
@@ -77,10 +77,11 @@
/* MSTP4 */
#define R8A7793_CLK_IRQC 7
+#define R8A7793_CLK_INTC_SYS 8
/* MSTP5 */
-#define R8A7793_CLK_AUDIO_DMAC1 1
-#define R8A7793_CLK_AUDIO_DMAC0 2
+#define R8A7793_CLK_AUDIO_DMAC1 1
+#define R8A7793_CLK_AUDIO_DMAC0 2
#define R8A7793_CLK_ADSP_MOD 6
#define R8A7793_CLK_THERMAL 22
#define R8A7793_CLK_PWM 23
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 88e6484..93e99c3 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -64,6 +64,7 @@
/* MSTP4 */
#define R8A7794_CLK_IRQC 7
+#define R8A7794_CLK_INTC_SYS 8
/* MSTP5 */
#define R8A7794_CLK_AUDIO_DMAC0 2
@@ -81,6 +82,7 @@
#define R8A7794_CLK_SCIF2 19
#define R8A7794_CLK_SCIF1 20
#define R8A7794_CLK_SCIF0 21
+#define R8A7794_CLK_DU1 23
#define R8A7794_CLK_DU0 24
/* MSTP8 */
diff --git a/include/dt-bindings/genpd/k2g.h b/include/dt-bindings/genpd/k2g.h
new file mode 100644
index 0000000..1f31f17
--- /dev/null
+++ b/include/dt-bindings/genpd/k2g.h
@@ -0,0 +1,90 @@
+/*
+ * TI K2G SoC Device definitions
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_GENPD_K2G_H
+#define _DT_BINDINGS_GENPD_K2G_H
+
+/* Documented in http://processors.wiki.ti.com/index.php/TISCI */
+
+#define K2G_DEV_PMMC0 0x0000
+#define K2G_DEV_MLB0 0x0001
+#define K2G_DEV_DSS0 0x0002
+#define K2G_DEV_MCBSP0 0x0003
+#define K2G_DEV_MCASP0 0x0004
+#define K2G_DEV_MCASP1 0x0005
+#define K2G_DEV_MCASP2 0x0006
+#define K2G_DEV_DCAN0 0x0008
+#define K2G_DEV_DCAN1 0x0009
+#define K2G_DEV_EMIF0 0x000a
+#define K2G_DEV_MMCHS0 0x000b
+#define K2G_DEV_MMCHS1 0x000c
+#define K2G_DEV_GPMC0 0x000d
+#define K2G_DEV_ELM0 0x000e
+#define K2G_DEV_SPI0 0x0010
+#define K2G_DEV_SPI1 0x0011
+#define K2G_DEV_SPI2 0x0012
+#define K2G_DEV_SPI3 0x0013
+#define K2G_DEV_ICSS0 0x0014
+#define K2G_DEV_ICSS1 0x0015
+#define K2G_DEV_USB0 0x0016
+#define K2G_DEV_USB1 0x0017
+#define K2G_DEV_NSS0 0x0018
+#define K2G_DEV_PCIE0 0x0019
+#define K2G_DEV_GPIO0 0x001b
+#define K2G_DEV_GPIO1 0x001c
+#define K2G_DEV_TIMER64_0 0x001d
+#define K2G_DEV_TIMER64_1 0x001e
+#define K2G_DEV_TIMER64_2 0x001f
+#define K2G_DEV_TIMER64_3 0x0020
+#define K2G_DEV_TIMER64_4 0x0021
+#define K2G_DEV_TIMER64_5 0x0022
+#define K2G_DEV_TIMER64_6 0x0023
+#define K2G_DEV_MSGMGR0 0x0025
+#define K2G_DEV_BOOTCFG0 0x0026
+#define K2G_DEV_ARM_BOOTROM0 0x0027
+#define K2G_DEV_DSP_BOOTROM0 0x0029
+#define K2G_DEV_DEBUGSS0 0x002b
+#define K2G_DEV_UART0 0x002c
+#define K2G_DEV_UART1 0x002d
+#define K2G_DEV_UART2 0x002e
+#define K2G_DEV_EHRPWM0 0x002f
+#define K2G_DEV_EHRPWM1 0x0030
+#define K2G_DEV_EHRPWM2 0x0031
+#define K2G_DEV_EHRPWM3 0x0032
+#define K2G_DEV_EHRPWM4 0x0033
+#define K2G_DEV_EHRPWM5 0x0034
+#define K2G_DEV_EQEP0 0x0035
+#define K2G_DEV_EQEP1 0x0036
+#define K2G_DEV_EQEP2 0x0037
+#define K2G_DEV_ECAP0 0x0038
+#define K2G_DEV_ECAP1 0x0039
+#define K2G_DEV_I2C0 0x003a
+#define K2G_DEV_I2C1 0x003b
+#define K2G_DEV_I2C2 0x003c
+#define K2G_DEV_EDMA0 0x003f
+#define K2G_DEV_SEMAPHORE0 0x0040
+#define K2G_DEV_INTC0 0x0041
+#define K2G_DEV_GIC0 0x0042
+#define K2G_DEV_QSPI0 0x0043
+#define K2G_DEV_ARM_64B_COUNTER0 0x0044
+#define K2G_DEV_TETRIS0 0x0045
+#define K2G_DEV_CGEM0 0x0046
+#define K2G_DEV_MSMC0 0x0047
+#define K2G_DEV_CBASS0 0x0049
+#define K2G_DEV_BOARD0 0x004c
+#define K2G_DEV_EDMA1 0x004f
+
+#endif
diff --git a/include/dt-bindings/mfd/stm32f7-rcc.h b/include/dt-bindings/mfd/stm32f7-rcc.h
new file mode 100644
index 0000000..e36cc69
--- /dev/null
+++ b/include/dt-bindings/mfd/stm32f7-rcc.h
@@ -0,0 +1,112 @@
+/*
+ * This header provides constants for the STM32F7 RCC IP
+ */
+
+#ifndef _DT_BINDINGS_MFD_STM32F7_RCC_H
+#define _DT_BINDINGS_MFD_STM32F7_RCC_H
+
+/* AHB1 */
+#define STM32F7_RCC_AHB1_GPIOA 0
+#define STM32F7_RCC_AHB1_GPIOB 1
+#define STM32F7_RCC_AHB1_GPIOC 2
+#define STM32F7_RCC_AHB1_GPIOD 3
+#define STM32F7_RCC_AHB1_GPIOE 4
+#define STM32F7_RCC_AHB1_GPIOF 5
+#define STM32F7_RCC_AHB1_GPIOG 6
+#define STM32F7_RCC_AHB1_GPIOH 7
+#define STM32F7_RCC_AHB1_GPIOI 8
+#define STM32F7_RCC_AHB1_GPIOJ 9
+#define STM32F7_RCC_AHB1_GPIOK 10
+#define STM32F7_RCC_AHB1_CRC 12
+#define STM32F7_RCC_AHB1_BKPSRAM 18
+#define STM32F7_RCC_AHB1_DTCMRAM 20
+#define STM32F7_RCC_AHB1_DMA1 21
+#define STM32F7_RCC_AHB1_DMA2 22
+#define STM32F7_RCC_AHB1_DMA2D 23
+#define STM32F7_RCC_AHB1_ETHMAC 25
+#define STM32F7_RCC_AHB1_ETHMACTX 26
+#define STM32F7_RCC_AHB1_ETHMACRX 27
+#define STM32FF_RCC_AHB1_ETHMACPTP 28
+#define STM32F7_RCC_AHB1_OTGHS 29
+#define STM32F7_RCC_AHB1_OTGHSULPI 30
+
+#define STM32F7_AHB1_RESET(bit) (STM32F7_RCC_AHB1_##bit + (0x10 * 8))
+#define STM32F7_AHB1_CLOCK(bit) (STM32F7_RCC_AHB1_##bit)
+
+
+/* AHB2 */
+#define STM32F7_RCC_AHB2_DCMI 0
+#define STM32F7_RCC_AHB2_CRYP 4
+#define STM32F7_RCC_AHB2_HASH 5
+#define STM32F7_RCC_AHB2_RNG 6
+#define STM32F7_RCC_AHB2_OTGFS 7
+
+#define STM32F7_AHB2_RESET(bit) (STM32F7_RCC_AHB2_##bit + (0x14 * 8))
+#define STM32F7_AHB2_CLOCK(bit) (STM32F7_RCC_AHB2_##bit + 0x20)
+
+/* AHB3 */
+#define STM32F7_RCC_AHB3_FMC 0
+#define STM32F7_RCC_AHB3_QSPI 1
+
+#define STM32F7_AHB3_RESET(bit) (STM32F7_RCC_AHB3_##bit + (0x18 * 8))
+#define STM32F7_AHB3_CLOCK(bit) (STM32F7_RCC_AHB3_##bit + 0x40)
+
+/* APB1 */
+#define STM32F7_RCC_APB1_TIM2 0
+#define STM32F7_RCC_APB1_TIM3 1
+#define STM32F7_RCC_APB1_TIM4 2
+#define STM32F7_RCC_APB1_TIM5 3
+#define STM32F7_RCC_APB1_TIM6 4
+#define STM32F7_RCC_APB1_TIM7 5
+#define STM32F7_RCC_APB1_TIM12 6
+#define STM32F7_RCC_APB1_TIM13 7
+#define STM32F7_RCC_APB1_TIM14 8
+#define STM32F7_RCC_APB1_LPTIM1 9
+#define STM32F7_RCC_APB1_WWDG 11
+#define STM32F7_RCC_APB1_SPI2 14
+#define STM32F7_RCC_APB1_SPI3 15
+#define STM32F7_RCC_APB1_SPDIFRX 16
+#define STM32F7_RCC_APB1_UART2 17
+#define STM32F7_RCC_APB1_UART3 18
+#define STM32F7_RCC_APB1_UART4 19
+#define STM32F7_RCC_APB1_UART5 20
+#define STM32F7_RCC_APB1_I2C1 21
+#define STM32F7_RCC_APB1_I2C2 22
+#define STM32F7_RCC_APB1_I2C3 23
+#define STM32F7_RCC_APB1_I2C4 24
+#define STM32F7_RCC_APB1_CAN1 25
+#define STM32F7_RCC_APB1_CAN2 26
+#define STM32F7_RCC_APB1_CEC 27
+#define STM32F7_RCC_APB1_PWR 28
+#define STM32F7_RCC_APB1_DAC 29
+#define STM32F7_RCC_APB1_UART7 30
+#define STM32F7_RCC_APB1_UART8 31
+
+#define STM32F7_APB1_RESET(bit) (STM32F7_RCC_APB1_##bit + (0x20 * 8))
+#define STM32F7_APB1_CLOCK(bit) (STM32F7_RCC_APB1_##bit + 0x80)
+
+/* APB2 */
+#define STM32F7_RCC_APB2_TIM1 0
+#define STM32F7_RCC_APB2_TIM8 1
+#define STM32F7_RCC_APB2_USART1 4
+#define STM32F7_RCC_APB2_USART6 5
+#define STM32F7_RCC_APB2_ADC1 8
+#define STM32F7_RCC_APB2_ADC2 9
+#define STM32F7_RCC_APB2_ADC3 10
+#define STM32F7_RCC_APB2_SDMMC1 11
+#define STM32F7_RCC_APB2_SPI1 12
+#define STM32F7_RCC_APB2_SPI4 13
+#define STM32F7_RCC_APB2_SYSCFG 14
+#define STM32F7_RCC_APB2_TIM9 16
+#define STM32F7_RCC_APB2_TIM10 17
+#define STM32F7_RCC_APB2_TIM11 18
+#define STM32F7_RCC_APB2_SPI5 20
+#define STM32F7_RCC_APB2_SPI6 21
+#define STM32F7_RCC_APB2_SAI1 22
+#define STM32F7_RCC_APB2_SAI2 23
+#define STM32F7_RCC_APB2_LTDC 26
+
+#define STM32F7_APB2_RESET(bit) (STM32F7_RCC_APB2_##bit + (0x24 * 8))
+#define STM32F7_APB2_CLOCK(bit) (STM32F7_RCC_APB2_##bit + 0xA0)
+
+#endif /* _DT_BINDINGS_MFD_STM32F7_RCC_H */
diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h
index 38f1ea8..0359bfd 100644
--- a/include/dt-bindings/pinctrl/hisi.h
+++ b/include/dt-bindings/pinctrl/hisi.h
@@ -56,4 +56,19 @@
#define DRIVE4_08MA (4 << 4)
#define DRIVE4_10MA (6 << 4)
+/* drive strength definition for hi3660 */
+#define DRIVE6_MASK (15 << 4)
+#define DRIVE6_04MA (0 << 4)
+#define DRIVE6_12MA (4 << 4)
+#define DRIVE6_19MA (8 << 4)
+#define DRIVE6_27MA (10 << 4)
+#define DRIVE6_32MA (15 << 4)
+#define DRIVE7_02MA (0 << 4)
+#define DRIVE7_04MA (1 << 4)
+#define DRIVE7_06MA (2 << 4)
+#define DRIVE7_08MA (3 << 4)
+#define DRIVE7_10MA (4 << 4)
+#define DRIVE7_12MA (5 << 4)
+#define DRIVE7_14MA (6 << 4)
+#define DRIVE7_16MA (7 << 4)
#endif
diff --git a/include/dt-bindings/power/imx7-power.h b/include/dt-bindings/power/imx7-power.h
new file mode 100644
index 0000000..3a181e4
--- /dev/null
+++ b/include/dt-bindings/power/imx7-power.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2017 Impinj
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_IMX7_POWER_H__
+#define __DT_BINDINGS_IMX7_POWER_H__
+
+#define IMX7_POWER_DOMAIN_MIPI_PHY 0
+#define IMX7_POWER_DOMAIN_PCIE_PHY 1
+#define IMX7_POWER_DOMAIN_USB_HSIC_PHY 2
+
+#endif
diff --git a/include/dt-bindings/power/r8a7795-sysc.h b/include/dt-bindings/power/r8a7795-sysc.h
index ee2e26b..ad679ee 100644
--- a/include/dt-bindings/power/r8a7795-sysc.h
+++ b/include/dt-bindings/power/r8a7795-sysc.h
@@ -33,7 +33,7 @@
#define R8A7795_PD_CA53_SCU 21
#define R8A7795_PD_3DG_E 22
#define R8A7795_PD_A3IR 24
-#define R8A7795_PD_A2VC0 25
+#define R8A7795_PD_A2VC0 25 /* ES1.x only */
#define R8A7795_PD_A2VC1 26
/* Always-on power area */
diff --git a/include/dt-bindings/reset/altr,rst-mgr-a10sr.h b/include/dt-bindings/reset/altr,rst-mgr-a10sr.h
new file mode 100644
index 0000000..9855925
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr-a10sr.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright Intel Corporation (C) 2017. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Reset binding definitions for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from altr,rst-mgr-a10.h
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10SR_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10SR_H
+
+/* Peripheral PHY resets */
+#define A10SR_RESET_ENET_HPS 0
+#define A10SR_RESET_PCIE 1
+#define A10SR_RESET_FILE 2
+#define A10SR_RESET_BQSPI 3
+#define A10SR_RESET_USB 4
+
+#define A10SR_RESET_NUM 5
+
+#endif
diff --git a/include/dt-bindings/reset/imx7-reset.h b/include/dt-bindings/reset/imx7-reset.h
new file mode 100644
index 0000000..6394817
--- /dev/null
+++ b/include/dt-bindings/reset/imx7-reset.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2017 Impinj, Inc.
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DT_BINDING_RESET_IMX7_H
+#define DT_BINDING_RESET_IMX7_H
+
+#define IMX7_RESET_A7_CORE_POR_RESET0 0
+#define IMX7_RESET_A7_CORE_POR_RESET1 1
+#define IMX7_RESET_A7_CORE_RESET0 2
+#define IMX7_RESET_A7_CORE_RESET1 3
+#define IMX7_RESET_A7_DBG_RESET0 4
+#define IMX7_RESET_A7_DBG_RESET1 5
+#define IMX7_RESET_A7_ETM_RESET0 6
+#define IMX7_RESET_A7_ETM_RESET1 7
+#define IMX7_RESET_A7_SOC_DBG_RESET 8
+#define IMX7_RESET_A7_L2RESET 9
+#define IMX7_RESET_SW_M4C_RST 10
+#define IMX7_RESET_SW_M4P_RST 11
+#define IMX7_RESET_EIM_RST 12
+#define IMX7_RESET_HSICPHY_PORT_RST 13
+#define IMX7_RESET_USBPHY1_POR 14
+#define IMX7_RESET_USBPHY1_PORT_RST 15
+#define IMX7_RESET_USBPHY2_POR 16
+#define IMX7_RESET_USBPHY2_PORT_RST 17
+#define IMX7_RESET_MIPI_PHY_MRST 18
+#define IMX7_RESET_MIPI_PHY_SRST 19
+
+/*
+ * IMX7_RESET_PCIEPHY is a logical reset line combining PCIEPHY_BTN
+ * and PCIEPHY_G_RST
+ */
+#define IMX7_RESET_PCIEPHY 20
+#define IMX7_RESET_PCIEPHY_PERST 21
+
+/*
+ * IMX7_RESET_PCIE_CTRL_APPS_EN is not strictly a reset line, but it
+ * can be used to inhibit PCIe LTTSM, so, in a way, it can be thoguht
+ * of as one
+ */
+#define IMX7_RESET_PCIE_CTRL_APPS_EN 22
+#define IMX7_RESET_DDRC_PRST 23
+#define IMX7_RESET_DDRC_CORE_RST 24
+
+#define IMX7_RESET_NUM 25
+
+#endif
+
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 0f9de30..137e4a3 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -770,8 +770,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
return DEV_DMA_NOT_SUPPORTED;
}
-static inline void acpi_dma_configure(struct device *dev,
- enum dev_dma_attr attr) { }
+static inline int acpi_dma_configure(struct device *dev,
+ enum dev_dma_attr attr)
+{
+ return 0;
+}
static inline void acpi_dma_deconfigure(struct device *dev) { }
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index 26e25d8..3ff9ace 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -55,7 +55,4 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
{ return NULL; }
#endif
-#define IORT_ACPI_DECLARE(name, table_id, fn) \
- ACPI_DECLARE_PROBE_ENTRY(iort, name, table_id, 0, NULL, 0, fn)
-
#endif /* __ACPI_IORT_H__ */
diff --git a/include/linux/amba/pl080.h b/include/linux/amba/pl080.h
index 91b84a7..580b532 100644
--- a/include/linux/amba/pl080.h
+++ b/include/linux/amba/pl080.h
@@ -38,24 +38,16 @@
#define PL080_SOFT_LSREQ (0x2C)
#define PL080_CONFIG (0x30)
-#define PL080_CONFIG_M2_BE (1 << 2)
-#define PL080_CONFIG_M1_BE (1 << 1)
-#define PL080_CONFIG_ENABLE (1 << 0)
+#define PL080_CONFIG_M2_BE BIT(2)
+#define PL080_CONFIG_M1_BE BIT(1)
+#define PL080_CONFIG_ENABLE BIT(0)
#define PL080_SYNC (0x34)
/* Per channel configuration registers */
-#define PL080_Cx_STRIDE (0x20)
+/* Per channel configuration registers */
#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
-#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
-#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
-#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
-#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
-#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
-
#define PL080_CH_SRC_ADDR (0x00)
#define PL080_CH_DST_ADDR (0x04)
#define PL080_CH_LLI (0x08)
@@ -66,18 +58,18 @@
#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
#define PL080_LLI_ADDR_SHIFT (2)
-#define PL080_LLI_LM_AHB2 (1 << 0)
+#define PL080_LLI_LM_AHB2 BIT(0)
-#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
+#define PL080_CONTROL_TC_IRQ_EN BIT(31)
#define PL080_CONTROL_PROT_MASK (0x7 << 28)
#define PL080_CONTROL_PROT_SHIFT (28)
-#define PL080_CONTROL_PROT_CACHE (1 << 30)
-#define PL080_CONTROL_PROT_BUFF (1 << 29)
-#define PL080_CONTROL_PROT_SYS (1 << 28)
-#define PL080_CONTROL_DST_INCR (1 << 27)
-#define PL080_CONTROL_SRC_INCR (1 << 26)
-#define PL080_CONTROL_DST_AHB2 (1 << 25)
-#define PL080_CONTROL_SRC_AHB2 (1 << 24)
+#define PL080_CONTROL_PROT_CACHE BIT(30)
+#define PL080_CONTROL_PROT_BUFF BIT(29)
+#define PL080_CONTROL_PROT_SYS BIT(28)
+#define PL080_CONTROL_DST_INCR BIT(27)
+#define PL080_CONTROL_SRC_INCR BIT(26)
+#define PL080_CONTROL_DST_AHB2 BIT(25)
+#define PL080_CONTROL_SRC_AHB2 BIT(24)
#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
#define PL080_CONTROL_DWIDTH_SHIFT (21)
#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
@@ -103,20 +95,20 @@
#define PL080_WIDTH_16BIT (0x1)
#define PL080_WIDTH_32BIT (0x2)
-#define PL080N_CONFIG_ITPROT (1 << 20)
-#define PL080N_CONFIG_SECPROT (1 << 19)
-#define PL080_CONFIG_HALT (1 << 18)
-#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
-#define PL080_CONFIG_LOCK (1 << 16)
-#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
-#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
+#define PL080N_CONFIG_ITPROT BIT(20)
+#define PL080N_CONFIG_SECPROT BIT(19)
+#define PL080_CONFIG_HALT BIT(18)
+#define PL080_CONFIG_ACTIVE BIT(17) /* RO */
+#define PL080_CONFIG_LOCK BIT(16)
+#define PL080_CONFIG_TC_IRQ_MASK BIT(15)
+#define PL080_CONFIG_ERR_IRQ_MASK BIT(14)
#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
#define PL080_CONFIG_DST_SEL_SHIFT (6)
#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
#define PL080_CONFIG_SRC_SEL_SHIFT (1)
-#define PL080_CONFIG_ENABLE (1 << 0)
+#define PL080_CONFIG_ENABLE BIT(0)
#define PL080_FLOW_MEM2MEM (0x0)
#define PL080_FLOW_MEM2PER (0x1)
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
deleted file mode 100644
index fe93758..0000000
--- a/include/linux/amba/pl330.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/include/linux/amba/pl330.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __AMBA_PL330_H_
-#define __AMBA_PL330_H_
-
-#include <linux/dmaengine.h>
-
-struct dma_pl330_platdata {
- /*
- * Number of valid peripherals connected to DMAC.
- * This may be different from the value read from
- * CR0, as the PL330 implementation might have 'holes'
- * in the peri list or the peri could also be reached
- * from another DMAC which the platform prefers.
- */
- u8 nr_valid_peri;
- /* Array of valid peripherals */
- u8 *peri_id;
- /* Operational capabilities */
- dma_cap_mask_t cap_mask;
- /* Bytes to allocate for MC buffer */
- unsigned mcbuf_sz;
-};
-
-extern bool pl330_filter(struct dma_chan *chan, void *param);
-#endif /* __AMBA_PL330_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
index 9657f11..bca6a5e 100644
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -80,7 +80,7 @@ struct pci_dev;
#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */
-#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */
+#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal register */
#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */
#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 79591c3..bd029e52 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -196,8 +196,6 @@ void ll_rw_block(int, int, int, struct buffer_head * bh[]);
int sync_dirty_buffer(struct buffer_head *bh);
int __sync_dirty_buffer(struct buffer_head *bh, int op_flags);
void write_dirty_buffer(struct buffer_head *bh, int op_flags);
-int _submit_bh(int op, int op_flags, struct buffer_head *bh,
- unsigned long bio_flags);
int submit_bh(int, int, struct buffer_head *);
void write_boundary_block(struct block_device *bdev,
sector_t bblock, unsigned blocksize);
diff --git a/include/linux/console.h b/include/linux/console.h
index 5949d18..b8920a0 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -212,4 +212,6 @@ extern bool vgacon_text_force(void);
static inline bool vgacon_text_force(void) { return false; }
#endif
+extern void console_init(void);
+
#endif /* _LINUX_CONSOLE_H */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 1a67560..2404ad2 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -40,9 +40,9 @@ extern int nr_cpu_ids;
#ifdef CONFIG_CPUMASK_OFFSTACK
/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also,
* not all bits may be allocated. */
-#define nr_cpumask_bits nr_cpu_ids
+#define nr_cpumask_bits ((unsigned int)nr_cpu_ids)
#else
-#define nr_cpumask_bits NR_CPUS
+#define nr_cpumask_bits ((unsigned int)NR_CPUS)
#endif
/*
diff --git a/include/linux/crash_core.h b/include/linux/crash_core.h
new file mode 100644
index 0000000..541a197
--- /dev/null
+++ b/include/linux/crash_core.h
@@ -0,0 +1,69 @@
+#ifndef LINUX_CRASH_CORE_H
+#define LINUX_CRASH_CORE_H
+
+#include <linux/linkage.h>
+#include <linux/elfcore.h>
+#include <linux/elf.h>
+
+#define CRASH_CORE_NOTE_NAME "CORE"
+#define CRASH_CORE_NOTE_HEAD_BYTES ALIGN(sizeof(struct elf_note), 4)
+#define CRASH_CORE_NOTE_NAME_BYTES ALIGN(sizeof(CRASH_CORE_NOTE_NAME), 4)
+#define CRASH_CORE_NOTE_DESC_BYTES ALIGN(sizeof(struct elf_prstatus), 4)
+
+#define CRASH_CORE_NOTE_BYTES ((CRASH_CORE_NOTE_HEAD_BYTES * 2) + \
+ CRASH_CORE_NOTE_NAME_BYTES + \
+ CRASH_CORE_NOTE_DESC_BYTES)
+
+#define VMCOREINFO_BYTES (4096)
+#define VMCOREINFO_NOTE_NAME "VMCOREINFO"
+#define VMCOREINFO_NOTE_NAME_BYTES ALIGN(sizeof(VMCOREINFO_NOTE_NAME), 4)
+#define VMCOREINFO_NOTE_SIZE ((CRASH_CORE_NOTE_HEAD_BYTES * 2) + \
+ VMCOREINFO_NOTE_NAME_BYTES + \
+ VMCOREINFO_BYTES)
+
+typedef u32 note_buf_t[CRASH_CORE_NOTE_BYTES/4];
+
+void crash_save_vmcoreinfo(void);
+void arch_crash_save_vmcoreinfo(void);
+__printf(1, 2)
+void vmcoreinfo_append_str(const char *fmt, ...);
+phys_addr_t paddr_vmcoreinfo_note(void);
+
+#define VMCOREINFO_OSRELEASE(value) \
+ vmcoreinfo_append_str("OSRELEASE=%s\n", value)
+#define VMCOREINFO_PAGESIZE(value) \
+ vmcoreinfo_append_str("PAGESIZE=%ld\n", value)
+#define VMCOREINFO_SYMBOL(name) \
+ vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)
+#define VMCOREINFO_SIZE(name) \
+ vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
+ (unsigned long)sizeof(name))
+#define VMCOREINFO_STRUCT_SIZE(name) \
+ vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
+ (unsigned long)sizeof(struct name))
+#define VMCOREINFO_OFFSET(name, field) \
+ vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \
+ (unsigned long)offsetof(struct name, field))
+#define VMCOREINFO_LENGTH(name, value) \
+ vmcoreinfo_append_str("LENGTH(%s)=%lu\n", #name, (unsigned long)value)
+#define VMCOREINFO_NUMBER(name) \
+ vmcoreinfo_append_str("NUMBER(%s)=%ld\n", #name, (long)name)
+#define VMCOREINFO_CONFIG(name) \
+ vmcoreinfo_append_str("CONFIG_%s=y\n", #name)
+
+extern u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
+extern size_t vmcoreinfo_size;
+extern size_t vmcoreinfo_max_size;
+
+Elf_Word *append_elf_note(Elf_Word *buf, char *name, unsigned int type,
+ void *data, size_t data_len);
+void final_note(Elf_Word *buf);
+
+int __init parse_crashkernel(char *cmdline, unsigned long long system_ram,
+ unsigned long long *crash_size, unsigned long long *crash_base);
+int parse_crashkernel_high(char *cmdline, unsigned long long system_ram,
+ unsigned long long *crash_size, unsigned long long *crash_base);
+int parse_crashkernel_low(char *cmdline, unsigned long long system_ram,
+ unsigned long long *crash_size, unsigned long long *crash_base);
+
+#endif /* LINUX_CRASH_CORE_H */
diff --git a/include/linux/dma-iommu.h b/include/linux/dma-iommu.h
index 5725c94..4eac267 100644
--- a/include/linux/dma-iommu.h
+++ b/include/linux/dma-iommu.h
@@ -20,6 +20,7 @@
#include <asm/errno.h>
#ifdef CONFIG_IOMMU_DMA
+#include <linux/dma-mapping.h>
#include <linux/iommu.h>
#include <linux/msi.h>
@@ -71,6 +72,7 @@ int iommu_dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
/* The DMA API isn't _quite_ the whole story, though... */
void iommu_dma_map_msi_msg(int irq, struct msi_msg *msg);
+void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list);
#else
@@ -100,6 +102,10 @@ static inline void iommu_dma_map_msi_msg(int irq, struct msi_msg *msg)
{
}
+static inline void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list)
+{
+}
+
#endif /* CONFIG_IOMMU_DMA */
#endif /* __KERNEL__ */
#endif /* __DMA_IOMMU_H */
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 0977317..4f3eece 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -728,6 +728,18 @@ dma_mark_declared_memory_occupied(struct device *dev,
}
#endif /* CONFIG_HAVE_GENERIC_DMA_COHERENT */
+#ifdef CONFIG_HAS_DMA
+int dma_configure(struct device *dev);
+void dma_deconfigure(struct device *dev);
+#else
+static inline int dma_configure(struct device *dev)
+{
+ return 0;
+}
+
+static inline void dma_deconfigure(struct device *dev) {}
+#endif
+
/*
* Managed DMA API
*/
diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h
index 187c102..9088407 100644
--- a/include/linux/dma_remapping.h
+++ b/include/linux/dma_remapping.h
@@ -39,6 +39,7 @@ extern int iommu_calculate_agaw(struct intel_iommu *iommu);
extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu);
extern int dmar_disabled;
extern int intel_iommu_enabled;
+extern int intel_iommu_tboot_noforce;
#else
static inline int iommu_calculate_agaw(struct intel_iommu *iommu)
{
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 20fa8d8..ba069e8 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -29,6 +29,7 @@ extern Elf32_Dyn _DYNAMIC [];
#define elf_note elf32_note
#define elf_addr_t Elf32_Off
#define Elf_Half Elf32_Half
+#define Elf_Word Elf32_Word
#else
@@ -39,6 +40,7 @@ extern Elf64_Dyn _DYNAMIC [];
#define elf_note elf64_note
#define elf_addr_t Elf64_Off
#define Elf_Half Elf64_Half
+#define Elf_Word Elf64_Word
#endif
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
index 76ce329..1b48d9c 100644
--- a/include/linux/fcntl.h
+++ b/include/linux/fcntl.h
@@ -3,6 +3,12 @@
#include <uapi/linux/fcntl.h>
+/* list of all valid flags for the open/openat flags argument: */
+#define VALID_OPEN_FLAGS \
+ (O_RDONLY | O_WRONLY | O_RDWR | O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC | \
+ O_APPEND | O_NDELAY | O_NONBLOCK | O_NDELAY | __O_SYNC | O_DSYNC | \
+ FASYNC | O_DIRECT | O_LARGEFILE | O_DIRECTORY | O_NOFOLLOW | \
+ O_NOATIME | O_CLOEXEC | O_PATH | __O_TMPFILE)
#ifndef force_o_largefile
#define force_o_largefile() (BITS_PER_LONG != 32)
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 9a7786d..56197f8 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -19,7 +19,9 @@
#include <net/sch_generic.h>
-#include <asm/cacheflush.h>
+#ifdef CONFIG_ARCH_HAS_SET_MEMORY
+#include <asm/set_memory.h>
+#endif
#include <uapi/linux/filter.h>
#include <uapi/linux/bpf.h>
diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h
index 8e953c6..37a5eae 100644
--- a/include/linux/firmware/meson/meson_sm.h
+++ b/include/linux/firmware/meson/meson_sm.h
@@ -25,7 +25,7 @@ int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 arg4);
int meson_sm_call_write(void *buffer, unsigned int b_size, unsigned int cmd_index,
u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
-int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0, u32 arg1,
- u32 arg2, u32 arg3, u32 arg4);
+int meson_sm_call_read(void *buffer, unsigned int bsize, unsigned int cmd_index,
+ u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
#endif /* _MESON_SM_FW_H_ */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 5d62d2c..26488b4 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -29,7 +29,6 @@
#include <linux/lockdep.h>
#include <linux/percpu-rwsem.h>
#include <linux/workqueue.h>
-#include <linux/percpu-rwsem.h>
#include <linux/delayed_call.h>
#include <asm/byteorder.h>
@@ -250,9 +249,8 @@ enum positive_aop_returns {
AOP_TRUNCATED_PAGE = 0x80001,
};
-#define AOP_FLAG_UNINTERRUPTIBLE 0x0001 /* will not do a short write */
-#define AOP_FLAG_CONT_EXPAND 0x0002 /* called from cont_expand */
-#define AOP_FLAG_NOFS 0x0004 /* used by filesystem to direct
+#define AOP_FLAG_CONT_EXPAND 0x0001 /* called from cont_expand */
+#define AOP_FLAG_NOFS 0x0002 /* used by filesystem to direct
* helper code (eg buffer layer)
* to clear GFP_FS from alloc */
@@ -2926,17 +2924,19 @@ extern int vfs_statx_fd(unsigned int, struct kstat *, u32, unsigned int);
static inline int vfs_stat(const char __user *filename, struct kstat *stat)
{
- return vfs_statx(AT_FDCWD, filename, 0, stat, STATX_BASIC_STATS);
+ return vfs_statx(AT_FDCWD, filename, AT_NO_AUTOMOUNT,
+ stat, STATX_BASIC_STATS);
}
static inline int vfs_lstat(const char __user *name, struct kstat *stat)
{
- return vfs_statx(AT_FDCWD, name, AT_SYMLINK_NOFOLLOW,
+ return vfs_statx(AT_FDCWD, name, AT_SYMLINK_NOFOLLOW | AT_NO_AUTOMOUNT,
stat, STATX_BASIC_STATS);
}
static inline int vfs_fstatat(int dfd, const char __user *filename,
struct kstat *stat, int flags)
{
- return vfs_statx(dfd, filename, flags, stat, STATX_BASIC_STATS);
+ return vfs_statx(dfd, filename, flags | AT_NO_AUTOMOUNT,
+ stat, STATX_BASIC_STATS);
}
static inline int vfs_fstat(int fd, struct kstat *stat)
{
@@ -3001,9 +3001,10 @@ extern const struct file_operations simple_dir_operations;
extern const struct inode_operations simple_dir_inode_operations;
extern void make_empty_dir_inode(struct inode *inode);
extern bool is_empty_dir_inode(struct inode *inode);
-struct tree_descr { char *name; const struct file_operations *ops; int mode; };
+struct tree_descr { const char *name; const struct file_operations *ops; int mode; };
struct dentry *d_alloc_name(struct dentry *, const char *);
-extern int simple_fill_super(struct super_block *, unsigned long, struct tree_descr *);
+extern int simple_fill_super(struct super_block *, unsigned long,
+ const struct tree_descr *);
extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
extern void simple_release_fs(struct vfsmount **mount, int *count);
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 6d2a63e..473f088 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -72,7 +72,7 @@ ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops);
* CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION_SAFE, STUB and
* IPMODIFY are a kind of attribute flags which can be set only before
* registering the ftrace_ops, and can not be modified while registered.
- * Changing those attribute flags after regsitering ftrace_ops will
+ * Changing those attribute flags after registering ftrace_ops will
* cause unexpected results.
*
* ENABLED - set/unset when ftrace_ops is registered/unregistered
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index c573a52..485a5b4 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -30,6 +30,8 @@
#include <linux/mmu_notifier.h>
#include <linux/list.h>
#include <linux/iommu.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+
#include <asm/cacheflush.h>
#include <asm/iommu.h>
@@ -72,24 +74,8 @@
#define OFFSET_STRIDE (9)
-#ifdef CONFIG_64BIT
#define dmar_readq(a) readq(a)
#define dmar_writeq(a,v) writeq(v,a)
-#else
-static inline u64 dmar_readq(void __iomem *addr)
-{
- u32 lo, hi;
- lo = readl(addr);
- hi = readl(addr + 4);
- return (((u64) hi) << 32) + lo;
-}
-
-static inline void dmar_writeq(void __iomem *addr, u64 val)
-{
- writel((u32)val, addr);
- writel((u32)(val >> 32), addr + 4);
-}
-#endif
#define DMAR_VER_MAJOR(v) (((v) & 0xf0) >> 4)
#define DMAR_VER_MINOR(v) ((v) & 0x0f)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 53144e7..a6fba48 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -155,7 +155,7 @@ extern int __must_check
request_percpu_irq(unsigned int irq, irq_handler_t handler,
const char *devname, void __percpu *percpu_dev_id);
-extern void free_irq(unsigned int, void *);
+extern const void *free_irq(unsigned int, void *);
extern void free_percpu_irq(unsigned int, void __percpu *);
struct device;
diff --git a/include/linux/io.h b/include/linux/io.h
index 82ef36e..2195d9e 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -90,6 +90,27 @@ void devm_memunmap(struct device *dev, void *addr);
void *__devm_memremap_pages(struct device *dev, struct resource *res);
+#ifdef CONFIG_PCI
+/*
+ * The PCI specifications (Rev 3.0, 3.2.5 "Transaction Ordering and
+ * Posting") mandate non-posted configuration transactions. There is
+ * no ioremap API in the kernel that can guarantee non-posted write
+ * semantics across arches so provide a default implementation for
+ * mapping PCI config space that defaults to ioremap_nocache(); arches
+ * should override it if they have memory mapping implementations that
+ * guarantee non-posted writes semantics to make the memory mapping
+ * compliant with the PCI specification.
+ */
+#ifndef pci_remap_cfgspace
+#define pci_remap_cfgspace pci_remap_cfgspace
+static inline void __iomem *pci_remap_cfgspace(phys_addr_t offset,
+ size_t size)
+{
+ return ioremap_nocache(offset, size);
+}
+#endif
+#endif
+
/*
* Some systems do not have legacy ISA devices.
* /dev/port is not a valid interface on these systems.
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 2e4de0d..2cb54ad 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -19,12 +19,12 @@
#ifndef __LINUX_IOMMU_H
#define __LINUX_IOMMU_H
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/types.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/of.h>
-#include <linux/types.h>
-#include <linux/scatterlist.h>
-#include <trace/events/iommu.h>
#define IOMMU_READ (1 << 0)
#define IOMMU_WRITE (1 << 1)
@@ -32,10 +32,13 @@
#define IOMMU_NOEXEC (1 << 3)
#define IOMMU_MMIO (1 << 4) /* e.g. things like MSI doorbells */
/*
- * This is to make the IOMMU API setup privileged
- * mapppings accessible by the master only at higher
- * privileged execution level and inaccessible at
- * less privileged levels.
+ * Where the bus hardware includes a privilege level as part of its access type
+ * markings, and certain devices are capable of issuing transactions marked as
+ * either 'supervisor' or 'user', the IOMMU_PRIV flag requests that the other
+ * given permission flags only apply to accesses at the higher privilege level,
+ * and that unprivileged transactions should have as little access as possible.
+ * This would usually imply the same permissions as kernel mappings on the CPU,
+ * if the IOMMU page table format is equivalent.
*/
#define IOMMU_PRIV (1 << 5)
@@ -336,46 +339,9 @@ extern int iommu_domain_window_enable(struct iommu_domain *domain, u32 wnd_nr,
phys_addr_t offset, u64 size,
int prot);
extern void iommu_domain_window_disable(struct iommu_domain *domain, u32 wnd_nr);
-/**
- * report_iommu_fault() - report about an IOMMU fault to the IOMMU framework
- * @domain: the iommu domain where the fault has happened
- * @dev: the device where the fault has happened
- * @iova: the faulting address
- * @flags: mmu fault flags (e.g. IOMMU_FAULT_READ/IOMMU_FAULT_WRITE/...)
- *
- * This function should be called by the low-level IOMMU implementations
- * whenever IOMMU faults happen, to allow high-level users, that are
- * interested in such events, to know about them.
- *
- * This event may be useful for several possible use cases:
- * - mere logging of the event
- * - dynamic TLB/PTE loading
- * - if restarting of the faulting device is required
- *
- * Returns 0 on success and an appropriate error code otherwise (if dynamic
- * PTE/TLB loading will one day be supported, implementations will be able
- * to tell whether it succeeded or not according to this return value).
- *
- * Specifically, -ENOSYS is returned if a fault handler isn't installed
- * (though fault handlers can also return -ENOSYS, in case they want to
- * elicit the default behavior of the IOMMU drivers).
- */
-static inline int report_iommu_fault(struct iommu_domain *domain,
- struct device *dev, unsigned long iova, int flags)
-{
- int ret = -ENOSYS;
- /*
- * if upper layers showed interest and installed a fault handler,
- * invoke it.
- */
- if (domain->handler)
- ret = domain->handler(domain, dev, iova, flags,
- domain->handler_token);
-
- trace_io_page_fault(dev, iova, flags);
- return ret;
-}
+extern int report_iommu_fault(struct iommu_domain *domain, struct device *dev,
+ unsigned long iova, int flags);
static inline size_t iommu_map_sg(struct iommu_domain *domain,
unsigned long iova, struct scatterlist *sg,
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index 9d84942..71fd92d 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -8,8 +8,7 @@
#define IPCMNI 32768 /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
/* used by in-kernel data structures */
-struct kern_ipc_perm
-{
+struct kern_ipc_perm {
spinlock_t lock;
bool deleted;
int id;
@@ -18,9 +17,9 @@ struct kern_ipc_perm
kgid_t gid;
kuid_t cuid;
kgid_t cgid;
- umode_t mode;
+ umode_t mode;
unsigned long seq;
void *security;
-};
+} ____cacheline_aligned_in_smp;
#endif /* _LINUX_IPC_H */
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 624215c..36872fb 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_JIFFIES_H
#define _LINUX_JIFFIES_H
+#include <linux/cache.h>
#include <linux/math64.h>
#include <linux/kernel.h>
#include <linux/types.h>
@@ -63,19 +64,13 @@ extern int register_refined_jiffies(long clock_tick_rate);
/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
-/* some arch's have a small-data section that can be accessed register-relative
- * but that can only take up to, say, 4-byte variables. jiffies being part of
- * an 8-byte variable may not be correctly accessed unless we force the issue
- */
-#define __jiffy_data __attribute__((section(".data")))
-
/*
* The 64-bit value is not atomic - you MUST NOT read it
* without sampling the sequence number in jiffies_lock.
* get_jiffies_64() will do this for you as appropriate.
*/
-extern u64 __jiffy_data jiffies_64;
-extern unsigned long volatile __jiffy_data jiffies;
+extern u64 __cacheline_aligned_in_smp jiffies_64;
+extern unsigned long volatile __cacheline_aligned_in_smp jiffies;
#if (BITS_PER_LONG < 64)
u64 get_jiffies_64(void);
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index d419d0e..c9481eb 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -14,17 +14,15 @@
#if !defined(__ASSEMBLY__)
+#include <linux/crash_core.h>
#include <asm/io.h>
#include <uapi/linux/kexec.h>
#ifdef CONFIG_KEXEC_CORE
#include <linux/list.h>
-#include <linux/linkage.h>
#include <linux/compat.h>
#include <linux/ioport.h>
-#include <linux/elfcore.h>
-#include <linux/elf.h>
#include <linux/module.h>
#include <asm/kexec.h>
@@ -62,19 +60,15 @@
#define KEXEC_CRASH_MEM_ALIGN PAGE_SIZE
#endif
-#define KEXEC_NOTE_HEAD_BYTES ALIGN(sizeof(struct elf_note), 4)
-#define KEXEC_CORE_NOTE_NAME "CORE"
-#define KEXEC_CORE_NOTE_NAME_BYTES ALIGN(sizeof(KEXEC_CORE_NOTE_NAME), 4)
-#define KEXEC_CORE_NOTE_DESC_BYTES ALIGN(sizeof(struct elf_prstatus), 4)
+#define KEXEC_CORE_NOTE_NAME CRASH_CORE_NOTE_NAME
+
/*
* The per-cpu notes area is a list of notes terminated by a "NULL"
* note header. For kdump, the code in vmcore.c runs in the context
* of the second kernel to combine them into one note.
*/
#ifndef KEXEC_NOTE_BYTES
-#define KEXEC_NOTE_BYTES ( (KEXEC_NOTE_HEAD_BYTES * 2) + \
- KEXEC_CORE_NOTE_NAME_BYTES + \
- KEXEC_CORE_NOTE_DESC_BYTES )
+#define KEXEC_NOTE_BYTES CRASH_CORE_NOTE_BYTES
#endif
/*
@@ -256,33 +250,6 @@ extern void crash_kexec(struct pt_regs *);
int kexec_should_crash(struct task_struct *);
int kexec_crash_loaded(void);
void crash_save_cpu(struct pt_regs *regs, int cpu);
-void crash_save_vmcoreinfo(void);
-void arch_crash_save_vmcoreinfo(void);
-__printf(1, 2)
-void vmcoreinfo_append_str(const char *fmt, ...);
-phys_addr_t paddr_vmcoreinfo_note(void);
-
-#define VMCOREINFO_OSRELEASE(value) \
- vmcoreinfo_append_str("OSRELEASE=%s\n", value)
-#define VMCOREINFO_PAGESIZE(value) \
- vmcoreinfo_append_str("PAGESIZE=%ld\n", value)
-#define VMCOREINFO_SYMBOL(name) \
- vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)
-#define VMCOREINFO_SIZE(name) \
- vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
- (unsigned long)sizeof(name))
-#define VMCOREINFO_STRUCT_SIZE(name) \
- vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
- (unsigned long)sizeof(struct name))
-#define VMCOREINFO_OFFSET(name, field) \
- vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \
- (unsigned long)offsetof(struct name, field))
-#define VMCOREINFO_LENGTH(name, value) \
- vmcoreinfo_append_str("LENGTH(%s)=%lu\n", #name, (unsigned long)value)
-#define VMCOREINFO_NUMBER(name) \
- vmcoreinfo_append_str("NUMBER(%s)=%ld\n", #name, (long)name)
-#define VMCOREINFO_CONFIG(name) \
- vmcoreinfo_append_str("CONFIG_%s=y\n", #name)
extern struct kimage *kexec_image;
extern struct kimage *kexec_crash_image;
@@ -303,31 +270,15 @@ extern int kexec_load_disabled;
#define KEXEC_FILE_FLAGS (KEXEC_FILE_UNLOAD | KEXEC_FILE_ON_CRASH | \
KEXEC_FILE_NO_INITRAMFS)
-#define VMCOREINFO_BYTES (4096)
-#define VMCOREINFO_NOTE_NAME "VMCOREINFO"
-#define VMCOREINFO_NOTE_NAME_BYTES ALIGN(sizeof(VMCOREINFO_NOTE_NAME), 4)
-#define VMCOREINFO_NOTE_SIZE (KEXEC_NOTE_HEAD_BYTES*2 + VMCOREINFO_BYTES \
- + VMCOREINFO_NOTE_NAME_BYTES)
-
/* Location of a reserved region to hold the crash kernel.
*/
extern struct resource crashk_res;
extern struct resource crashk_low_res;
-typedef u32 note_buf_t[KEXEC_NOTE_BYTES/4];
extern note_buf_t __percpu *crash_notes;
-extern u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
-extern size_t vmcoreinfo_size;
-extern size_t vmcoreinfo_max_size;
/* flag to track if kexec reboot is in progress */
extern bool kexec_in_progress;
-int __init parse_crashkernel(char *cmdline, unsigned long long system_ram,
- unsigned long long *crash_size, unsigned long long *crash_base);
-int parse_crashkernel_high(char *cmdline, unsigned long long system_ram,
- unsigned long long *crash_size, unsigned long long *crash_base);
-int parse_crashkernel_low(char *cmdline, unsigned long long system_ram,
- unsigned long long *crash_size, unsigned long long *crash_base);
int crash_shrink_memory(unsigned long new_size);
size_t crash_get_memory_size(void);
void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
diff --git a/include/linux/kref.h b/include/linux/kref.h
index f4156f8..29220724 100644
--- a/include/linux/kref.h
+++ b/include/linux/kref.h
@@ -66,8 +66,6 @@ static inline void kref_get(struct kref *kref)
*/
static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref))
{
- WARN_ON(release == NULL);
-
if (refcount_dec_and_test(&kref->refcount)) {
release(kref);
return 1;
@@ -79,8 +77,6 @@ static inline int kref_put_mutex(struct kref *kref,
void (*release)(struct kref *kref),
struct mutex *lock)
{
- WARN_ON(release == NULL);
-
if (refcount_dec_and_mutex_lock(&kref->refcount, lock)) {
release(kref);
return 1;
@@ -92,8 +88,6 @@ static inline int kref_put_lock(struct kref *kref,
void (*release)(struct kref *kref),
spinlock_t *lock)
{
- WARN_ON(release == NULL);
-
if (refcount_dec_and_lock(&kref->refcount, lock)) {
release(kref);
return 1;
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 3727afd..4d62947 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -776,8 +776,6 @@ void kvm_arch_check_processor_compat(void *rtn);
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu);
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu);
-void *kvm_kvzalloc(unsigned long size);
-
#ifndef __KVM_HAVE_ARCH_VM_ALLOC
static inline struct kvm *kvm_arch_alloc_vm(void)
{
diff --git a/include/linux/mfd/syscon/imx7-iomuxc-gpr.h b/include/linux/mfd/syscon/imx7-iomuxc-gpr.h
index 4585d61..abbd524 100644
--- a/include/linux/mfd/syscon/imx7-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx7-iomuxc-gpr.h
@@ -44,4 +44,8 @@
#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI (0x1 << 4)
+#define IMX7D_GPR12_PCIE_PHY_REFCLK_SEL BIT(5)
+
+#define IMX7D_GPR22_PCIE_PHY_PLL_LOCKED BIT(31)
+
#endif /* __LINUX_IMX7_IOMUXC_GPR_H */
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 74b765c..d5bed08 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -108,7 +108,7 @@ enum {
MLX4_MFUNC_EQE_MASK = (MLX4_MFUNC_MAX_EQES - 1)
};
-/* Driver supports 3 diffrent device methods to manage traffic steering:
+/* Driver supports 3 different device methods to manage traffic steering:
* -device managed - High level API for ib and eth flow steering. FW is
* managing flow steering tables.
* - B0 steering mode - Common low level API for ib and (if supported) eth.
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 3fece51..bcdf739 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -892,12 +892,7 @@ static inline u16 cmdif_rev(struct mlx5_core_dev *dev)
static inline void *mlx5_vzalloc(unsigned long size)
{
- void *rtn;
-
- rtn = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
- if (!rtn)
- rtn = vzalloc(size);
- return rtn;
+ return kvzalloc(size, GFP_KERNEL);
}
static inline u32 mlx5_base_mkey(const u32 key)
@@ -1102,6 +1097,25 @@ struct net_device *mlx5_lag_get_roce_netdev(struct mlx5_core_dev *dev);
struct mlx5_uars_page *mlx5_get_uars_page(struct mlx5_core_dev *mdev);
void mlx5_put_uars_page(struct mlx5_core_dev *mdev, struct mlx5_uars_page *up);
+#ifndef CONFIG_MLX5_CORE_IPOIB
+static inline
+struct net_device *mlx5_rdma_netdev_alloc(struct mlx5_core_dev *mdev,
+ struct ib_device *ibdev,
+ const char *name,
+ void (*setup)(struct net_device *))
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline void mlx5_rdma_netdev_free(struct net_device *netdev) {}
+#else
+struct net_device *mlx5_rdma_netdev_alloc(struct mlx5_core_dev *mdev,
+ struct ib_device *ibdev,
+ const char *name,
+ void (*setup)(struct net_device *));
+void mlx5_rdma_netdev_free(struct net_device *netdev);
+#endif /* CONFIG_MLX5_CORE_IPOIB */
+
struct mlx5_profile {
u64 mask;
u8 log_max_qp;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 5d22e69..7cb17c6 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -518,6 +518,28 @@ static inline int is_vmalloc_or_module_addr(const void *x)
}
#endif
+extern void *kvmalloc_node(size_t size, gfp_t flags, int node);
+static inline void *kvmalloc(size_t size, gfp_t flags)
+{
+ return kvmalloc_node(size, flags, NUMA_NO_NODE);
+}
+static inline void *kvzalloc_node(size_t size, gfp_t flags, int node)
+{
+ return kvmalloc_node(size, flags | __GFP_ZERO, node);
+}
+static inline void *kvzalloc(size_t size, gfp_t flags)
+{
+ return kvmalloc(size, flags | __GFP_ZERO);
+}
+
+static inline void *kvmalloc_array(size_t n, size_t size, gfp_t flags)
+{
+ if (size != 0 && n > SIZE_MAX / size)
+ return NULL;
+
+ return kvmalloc(n * size, flags);
+}
+
extern void kvfree(const void *addr);
static inline atomic_t *compound_mapcount_ptr(struct page *page)
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index e0c3c5e..ebaccd4 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -74,6 +74,11 @@ extern char * const migratetype_names[MIGRATE_TYPES];
# define is_migrate_cma_page(_page) false
#endif
+static inline bool is_migrate_movable(int mt)
+{
+ return is_migrate_cma(mt) || mt == MIGRATE_MOVABLE;
+}
+
#define for_each_migratetype_order(order, type) \
for (order = 0; order < MAX_ORDER; order++) \
for (type = 0; type < MIGRATE_TYPES; type++)
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 8850fca..566fda5 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -428,6 +428,16 @@ struct i2c_device_id {
kernel_ulong_t driver_data; /* Data private to the driver */
};
+/* pci_epf */
+
+#define PCI_EPF_NAME_SIZE 20
+#define PCI_EPF_MODULE_PREFIX "pci_epf:"
+
+struct pci_epf_device_id {
+ char name[PCI_EPF_NAME_SIZE];
+ kernel_ulong_t driver_data;
+};
+
/* spi */
#define SPI_NAME_SIZE 32
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 169ea0b..b4ad8b4 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -54,7 +54,8 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
return of_node_get(cpu_dev->of_node);
}
-void of_dma_configure(struct device *dev, struct device_node *np);
+int of_dma_configure(struct device *dev, struct device_node *np);
+void of_dma_deconfigure(struct device *dev);
#else /* CONFIG_OF */
static inline int of_driver_match_device(struct device *dev,
@@ -102,7 +103,12 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
{
return NULL;
}
-static inline void of_dma_configure(struct device *dev, struct device_node *np)
+
+static inline int of_dma_configure(struct device *dev, struct device_node *np)
+{
+ return 0;
+}
+static inline void of_dma_deconfigure(struct device *dev)
{}
#endif /* CONFIG_OF */
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index 0e0974e..518c8d2 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -85,15 +85,4 @@ static inline int of_pci_get_host_bridge_resources(struct device_node *dev,
}
#endif
-#if defined(CONFIG_OF) && defined(CONFIG_PCI_MSI)
-int of_pci_msi_chip_add(struct msi_controller *chip);
-void of_pci_msi_chip_remove(struct msi_controller *chip);
-struct msi_controller *of_pci_find_msi_chip_by_node(struct device_node *of_node);
-#else
-static inline int of_pci_msi_chip_add(struct msi_controller *chip) { return -EINVAL; }
-static inline void of_pci_msi_chip_remove(struct msi_controller *chip) { }
-static inline struct msi_controller *
-of_pci_find_msi_chip_by_node(struct device_node *of_node) { return NULL; }
-#endif
-
#endif
diff --git a/include/linux/page-isolation.h b/include/linux/page-isolation.h
index 047d647..d4cd201 100644
--- a/include/linux/page-isolation.h
+++ b/include/linux/page-isolation.h
@@ -33,10 +33,7 @@ bool has_unmovable_pages(struct zone *zone, struct page *page, int count,
bool skip_hwpoisoned_pages);
void set_pageblock_migratetype(struct page *page, int migratetype);
int move_freepages_block(struct zone *zone, struct page *page,
- int migratetype);
-int move_freepages(struct zone *zone,
- struct page *start_page, struct page *end_page,
- int migratetype);
+ int migratetype, int *num_movable);
/*
* Changes migrate type in [start_pfn, end_pfn) to be MIGRATE_ISOLATE.
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index f0d2b94..809c2f1 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -16,6 +16,7 @@
#ifndef DRIVERS_PCI_ECAM_H
#define DRIVERS_PCI_ECAM_H
+#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
@@ -68,7 +69,7 @@ extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
#endif
-#ifdef CONFIG_PCI_HOST_GENERIC
+#ifdef CONFIG_PCI_HOST_COMMON
/* for DT-based PCI controllers that support ECAM */
int pci_host_common_probe(struct platform_device *pdev,
struct pci_ecam_ops *ops);
diff --git a/include/linux/pci-ep-cfs.h b/include/linux/pci-ep-cfs.h
new file mode 100644
index 0000000..263b89e
--- /dev/null
+++ b/include/linux/pci-ep-cfs.h
@@ -0,0 +1,41 @@
+/**
+ * PCI Endpoint ConfigFS header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EP_CFS_H
+#define __LINUX_PCI_EP_CFS_H
+
+#include <linux/configfs.h>
+
+#ifdef CONFIG_PCI_ENDPOINT_CONFIGFS
+struct config_group *pci_ep_cfs_add_epc_group(const char *name);
+void pci_ep_cfs_remove_epc_group(struct config_group *group);
+struct config_group *pci_ep_cfs_add_epf_group(const char *name);
+void pci_ep_cfs_remove_epf_group(struct config_group *group);
+#else
+static inline struct config_group *pci_ep_cfs_add_epc_group(const char *name)
+{
+ return 0;
+}
+
+static inline void pci_ep_cfs_remove_epc_group(struct config_group *group)
+{
+}
+
+static inline struct config_group *pci_ep_cfs_add_epf_group(const char *name)
+{
+ return 0;
+}
+
+static inline void pci_ep_cfs_remove_epf_group(struct config_group *group)
+{
+}
+#endif
+#endif /* __LINUX_PCI_EP_CFS_H */
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
new file mode 100644
index 0000000..af5edbf
--- /dev/null
+++ b/include/linux/pci-epc.h
@@ -0,0 +1,144 @@
+/**
+ * PCI Endpoint *Controller* (EPC) header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EPC_H
+#define __LINUX_PCI_EPC_H
+
+#include <linux/pci-epf.h>
+
+struct pci_epc;
+
+enum pci_epc_irq_type {
+ PCI_EPC_IRQ_UNKNOWN,
+ PCI_EPC_IRQ_LEGACY,
+ PCI_EPC_IRQ_MSI,
+};
+
+/**
+ * struct pci_epc_ops - set of function pointers for performing EPC operations
+ * @write_header: ops to populate configuration space header
+ * @set_bar: ops to configure the BAR
+ * @clear_bar: ops to reset the BAR
+ * @map_addr: ops to map CPU address to PCI address
+ * @unmap_addr: ops to unmap CPU address and PCI address
+ * @set_msi: ops to set the requested number of MSI interrupts in the MSI
+ * capability register
+ * @get_msi: ops to get the number of MSI interrupts allocated by the RC from
+ * the MSI capability register
+ * @raise_irq: ops to raise a legacy or MSI interrupt
+ * @start: ops to start the PCI link
+ * @stop: ops to stop the PCI link
+ * @owner: the module owner containing the ops
+ */
+struct pci_epc_ops {
+ int (*write_header)(struct pci_epc *pci_epc,
+ struct pci_epf_header *hdr);
+ int (*set_bar)(struct pci_epc *epc, enum pci_barno bar,
+ dma_addr_t bar_phys, size_t size, int flags);
+ void (*clear_bar)(struct pci_epc *epc, enum pci_barno bar);
+ int (*map_addr)(struct pci_epc *epc, phys_addr_t addr,
+ u64 pci_addr, size_t size);
+ void (*unmap_addr)(struct pci_epc *epc, phys_addr_t addr);
+ int (*set_msi)(struct pci_epc *epc, u8 interrupts);
+ int (*get_msi)(struct pci_epc *epc);
+ int (*raise_irq)(struct pci_epc *pci_epc,
+ enum pci_epc_irq_type type, u8 interrupt_num);
+ int (*start)(struct pci_epc *epc);
+ void (*stop)(struct pci_epc *epc);
+ struct module *owner;
+};
+
+/**
+ * struct pci_epc_mem - address space of the endpoint controller
+ * @phys_base: physical base address of the PCI address space
+ * @size: the size of the PCI address space
+ * @bitmap: bitmap to manage the PCI address space
+ * @pages: number of bits representing the address region
+ */
+struct pci_epc_mem {
+ phys_addr_t phys_base;
+ size_t size;
+ unsigned long *bitmap;
+ int pages;
+};
+
+/**
+ * struct pci_epc - represents the PCI EPC device
+ * @dev: PCI EPC device
+ * @pci_epf: list of endpoint functions present in this EPC device
+ * @ops: function pointers for performing endpoint operations
+ * @mem: address space of the endpoint controller
+ * @max_functions: max number of functions that can be configured in this EPC
+ * @group: configfs group representing the PCI EPC device
+ * @lock: spinlock to protect pci_epc ops
+ */
+struct pci_epc {
+ struct device dev;
+ struct list_head pci_epf;
+ const struct pci_epc_ops *ops;
+ struct pci_epc_mem *mem;
+ u8 max_functions;
+ struct config_group *group;
+ /* spinlock to protect against concurrent access of EP controller */
+ spinlock_t lock;
+};
+
+#define to_pci_epc(device) container_of((device), struct pci_epc, dev)
+
+#define pci_epc_create(dev, ops) \
+ __pci_epc_create((dev), (ops), THIS_MODULE)
+#define devm_pci_epc_create(dev, ops) \
+ __devm_pci_epc_create((dev), (ops), THIS_MODULE)
+
+static inline void epc_set_drvdata(struct pci_epc *epc, void *data)
+{
+ dev_set_drvdata(&epc->dev, data);
+}
+
+static inline void *epc_get_drvdata(struct pci_epc *epc)
+{
+ return dev_get_drvdata(&epc->dev);
+}
+
+struct pci_epc *
+__devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+ struct module *owner);
+struct pci_epc *
+__pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+ struct module *owner);
+void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc);
+void pci_epc_destroy(struct pci_epc *epc);
+int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf);
+void pci_epc_linkup(struct pci_epc *epc);
+void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf);
+int pci_epc_write_header(struct pci_epc *epc, struct pci_epf_header *hdr);
+int pci_epc_set_bar(struct pci_epc *epc, enum pci_barno bar,
+ dma_addr_t bar_phys, size_t size, int flags);
+void pci_epc_clear_bar(struct pci_epc *epc, int bar);
+int pci_epc_map_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+ u64 pci_addr, size_t size);
+void pci_epc_unmap_addr(struct pci_epc *epc, phys_addr_t phys_addr);
+int pci_epc_set_msi(struct pci_epc *epc, u8 interrupts);
+int pci_epc_get_msi(struct pci_epc *epc);
+int pci_epc_raise_irq(struct pci_epc *epc, enum pci_epc_irq_type type,
+ u8 interrupt_num);
+int pci_epc_start(struct pci_epc *epc);
+void pci_epc_stop(struct pci_epc *epc);
+struct pci_epc *pci_epc_get(const char *epc_name);
+void pci_epc_put(struct pci_epc *epc);
+
+int pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_addr, size_t size);
+void pci_epc_mem_exit(struct pci_epc *epc);
+void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
+ phys_addr_t *phys_addr, size_t size);
+void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+ void __iomem *virt_addr, size_t size);
+#endif /* __LINUX_PCI_EPC_H */
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
new file mode 100644
index 0000000..0d529cb
--- /dev/null
+++ b/include/linux/pci-epf.h
@@ -0,0 +1,162 @@
+/**
+ * PCI Endpoint *Function* (EPF) header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EPF_H
+#define __LINUX_PCI_EPF_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct pci_epf;
+
+enum pci_interrupt_pin {
+ PCI_INTERRUPT_UNKNOWN,
+ PCI_INTERRUPT_INTA,
+ PCI_INTERRUPT_INTB,
+ PCI_INTERRUPT_INTC,
+ PCI_INTERRUPT_INTD,
+};
+
+enum pci_barno {
+ BAR_0,
+ BAR_1,
+ BAR_2,
+ BAR_3,
+ BAR_4,
+ BAR_5,
+};
+
+/**
+ * struct pci_epf_header - represents standard configuration header
+ * @vendorid: identifies device manufacturer
+ * @deviceid: identifies a particular device
+ * @revid: specifies a device-specific revision identifier
+ * @progif_code: identifies a specific register-level programming interface
+ * @subclass_code: identifies more specifically the function of the device
+ * @baseclass_code: broadly classifies the type of function the device performs
+ * @cache_line_size: specifies the system cacheline size in units of DWORDs
+ * @subsys_vendor_id: vendor of the add-in card or subsystem
+ * @subsys_id: id specific to vendor
+ * @interrupt_pin: interrupt pin the device (or device function) uses
+ */
+struct pci_epf_header {
+ u16 vendorid;
+ u16 deviceid;
+ u8 revid;
+ u8 progif_code;
+ u8 subclass_code;
+ u8 baseclass_code;
+ u8 cache_line_size;
+ u16 subsys_vendor_id;
+ u16 subsys_id;
+ enum pci_interrupt_pin interrupt_pin;
+};
+
+/**
+ * struct pci_epf_ops - set of function pointers for performing EPF operations
+ * @bind: ops to perform when a EPC device has been bound to EPF device
+ * @unbind: ops to perform when a binding has been lost between a EPC device
+ * and EPF device
+ * @linkup: ops to perform when the EPC device has established a connection with
+ * a host system
+ */
+struct pci_epf_ops {
+ int (*bind)(struct pci_epf *epf);
+ void (*unbind)(struct pci_epf *epf);
+ void (*linkup)(struct pci_epf *epf);
+};
+
+/**
+ * struct pci_epf_driver - represents the PCI EPF driver
+ * @probe: ops to perform when a new EPF device has been bound to the EPF driver
+ * @remove: ops to perform when the binding between the EPF device and EPF
+ * driver is broken
+ * @driver: PCI EPF driver
+ * @ops: set of function pointers for performing EPF operations
+ * @owner: the owner of the module that registers the PCI EPF driver
+ * @group: configfs group corresponding to the PCI EPF driver
+ * @id_table: identifies EPF devices for probing
+ */
+struct pci_epf_driver {
+ int (*probe)(struct pci_epf *epf);
+ int (*remove)(struct pci_epf *epf);
+
+ struct device_driver driver;
+ struct pci_epf_ops *ops;
+ struct module *owner;
+ struct config_group *group;
+ const struct pci_epf_device_id *id_table;
+};
+
+#define to_pci_epf_driver(drv) (container_of((drv), struct pci_epf_driver, \
+ driver))
+
+/**
+ * struct pci_epf_bar - represents the BAR of EPF device
+ * @phys_addr: physical address that should be mapped to the BAR
+ * @size: the size of the address space present in BAR
+ */
+struct pci_epf_bar {
+ dma_addr_t phys_addr;
+ size_t size;
+};
+
+/**
+ * struct pci_epf - represents the PCI EPF device
+ * @dev: the PCI EPF device
+ * @name: the name of the PCI EPF device
+ * @header: represents standard configuration header
+ * @bar: represents the BAR of EPF device
+ * @msi_interrupts: number of MSI interrupts required by this function
+ * @func_no: unique function number within this endpoint device
+ * @epc: the EPC device to which this EPF device is bound
+ * @driver: the EPF driver to which this EPF device is bound
+ * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc
+ */
+struct pci_epf {
+ struct device dev;
+ const char *name;
+ struct pci_epf_header *header;
+ struct pci_epf_bar bar[6];
+ u8 msi_interrupts;
+ u8 func_no;
+
+ struct pci_epc *epc;
+ struct pci_epf_driver *driver;
+ struct list_head list;
+};
+
+#define to_pci_epf(epf_dev) container_of((epf_dev), struct pci_epf, dev)
+
+#define pci_epf_register_driver(driver) \
+ __pci_epf_register_driver((driver), THIS_MODULE)
+
+static inline void epf_set_drvdata(struct pci_epf *epf, void *data)
+{
+ dev_set_drvdata(&epf->dev, data);
+}
+
+static inline void *epf_get_drvdata(struct pci_epf *epf)
+{
+ return dev_get_drvdata(&epf->dev);
+}
+
+struct pci_epf *pci_epf_create(const char *name);
+void pci_epf_destroy(struct pci_epf *epf);
+int __pci_epf_register_driver(struct pci_epf_driver *driver,
+ struct module *owner);
+void pci_epf_unregister_driver(struct pci_epf_driver *driver);
+void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar);
+void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar);
+int pci_epf_bind(struct pci_epf *epf);
+void pci_epf_unbind(struct pci_epf *epf);
+void pci_epf_linkup(struct pci_epf *epf);
+#endif /* __LINUX_PCI_EPF_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f27be84..33c2b0b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -28,6 +28,7 @@
#include <linux/kobject.h>
#include <linux/atomic.h>
#include <linux/device.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/resource_ext.h>
#include <uapi/linux/pci.h>
@@ -178,6 +179,10 @@ enum pci_dev_flags {
PCI_DEV_FLAGS_NO_PM_RESET = (__force pci_dev_flags_t) (1 << 7),
/* Get VPD from function 0 VPD */
PCI_DEV_FLAGS_VPD_REF_F0 = (__force pci_dev_flags_t) (1 << 8),
+ /* a non-root bridge where translation occurs, stop alias search here */
+ PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT = (__force pci_dev_flags_t) (1 << 9),
+ /* Do not use FLR even if device advertises PCI_AF_CAP */
+ PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10),
};
enum pci_irq_reroute_variant {
@@ -397,6 +402,8 @@ struct pci_dev {
phys_addr_t rom; /* Physical address of ROM if it's not from the BAR */
size_t romlen; /* Length of ROM if it's not from the BAR */
char *driver_override; /* Driver name to force a match */
+
+ unsigned long priv_flags; /* Private flags for the pci driver */
};
static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
@@ -941,32 +948,12 @@ int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn,
struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops);
-static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
-{
- return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
-{
- return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_read_config_dword(const struct pci_dev *dev, int where,
- u32 *val)
-{
- return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
-{
- return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
-{
- return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_dword(const struct pci_dev *dev, int where,
- u32 val)
-{
- return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
-}
+int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val);
+int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val);
+int pci_read_config_dword(const struct pci_dev *dev, int where, u32 *val);
+int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val);
+int pci_write_config_word(const struct pci_dev *dev, int where, u16 val);
+int pci_write_config_dword(const struct pci_dev *dev, int where, u32 val);
int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val);
int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val);
@@ -1053,6 +1040,7 @@ int pcie_get_mps(struct pci_dev *dev);
int pcie_set_mps(struct pci_dev *dev, int mps);
int pcie_get_minimum_link(struct pci_dev *dev, enum pci_bus_speed *speed,
enum pcie_link_width *width);
+void pcie_flr(struct pci_dev *dev);
int __pci_reset_function(struct pci_dev *dev);
int __pci_reset_function_locked(struct pci_dev *dev);
int pci_reset_function(struct pci_dev *dev);
@@ -1073,6 +1061,11 @@ int pci_select_bars(struct pci_dev *dev, unsigned long flags);
bool pci_device_is_present(struct pci_dev *pdev);
void pci_ignore_hotplug(struct pci_dev *dev);
+int __printf(6, 7) pci_request_irq(struct pci_dev *dev, unsigned int nr,
+ irq_handler_t handler, irq_handler_t thread_fn, void *dev_id,
+ const char *fmt, ...);
+void pci_free_irq(struct pci_dev *dev, unsigned int nr, void *dev_id);
+
/* ROM control related routines */
int pci_enable_rom(struct pci_dev *pdev);
void pci_disable_rom(struct pci_dev *pdev);
@@ -1200,6 +1193,11 @@ unsigned long pci_address_to_pio(phys_addr_t addr);
phys_addr_t pci_pio_to_address(unsigned long pio);
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
void pci_unmap_iospace(struct resource *res);
+void __iomem *devm_pci_remap_cfgspace(struct device *dev,
+ resource_size_t offset,
+ resource_size_t size);
+void __iomem *devm_pci_remap_cfg_resource(struct device *dev,
+ struct resource *res);
static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
{
@@ -1298,10 +1296,8 @@ struct msix_entry {
#ifdef CONFIG_PCI_MSI
int pci_msi_vec_count(struct pci_dev *dev);
-void pci_msi_shutdown(struct pci_dev *dev);
void pci_disable_msi(struct pci_dev *dev);
int pci_msix_vec_count(struct pci_dev *dev);
-void pci_msix_shutdown(struct pci_dev *dev);
void pci_disable_msix(struct pci_dev *dev);
void pci_restore_msi_state(struct pci_dev *dev);
int pci_msi_enabled(void);
@@ -1327,10 +1323,8 @@ int pci_irq_get_node(struct pci_dev *pdev, int vec);
#else
static inline int pci_msi_vec_count(struct pci_dev *dev) { return -ENOSYS; }
-static inline void pci_msi_shutdown(struct pci_dev *dev) { }
static inline void pci_disable_msi(struct pci_dev *dev) { }
static inline int pci_msix_vec_count(struct pci_dev *dev) { return -ENOSYS; }
-static inline void pci_msix_shutdown(struct pci_dev *dev) { }
static inline void pci_disable_msix(struct pci_dev *dev) { }
static inline void pci_restore_msi_state(struct pci_dev *dev) { }
static inline int pci_msi_enabled(void) { return 0; }
@@ -1623,6 +1617,36 @@ static inline int pci_get_new_domain_nr(void) { return -ENOSYS; }
#include <asm/pci.h>
+/* These two functions provide almost identical functionality. Depennding
+ * on the architecture, one will be implemented as a wrapper around the
+ * other (in drivers/pci/mmap.c).
+ *
+ * pci_mmap_resource_range() maps a specific BAR, and vm->vm_pgoff
+ * is expected to be an offset within that region.
+ *
+ * pci_mmap_page_range() is the legacy architecture-specific interface,
+ * which accepts a "user visible" resource address converted by
+ * pci_resource_to_user(), as used in the legacy mmap() interface in
+ * /proc/bus/pci/.
+ */
+int pci_mmap_resource_range(struct pci_dev *dev, int bar,
+ struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
+int pci_mmap_page_range(struct pci_dev *pdev, int bar,
+ struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
+
+#ifndef arch_can_pci_mmap_wc
+#define arch_can_pci_mmap_wc() 0
+#endif
+
+#ifndef arch_can_pci_mmap_io
+#define arch_can_pci_mmap_io() 0
+#define pci_iobar_pfn(pdev, bar, vma) (-EINVAL)
+#else
+int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma);
+#endif
+
#ifndef pci_root_bus_fwnode
#define pci_root_bus_fwnode(bus) NULL
#endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a4f77fe..5f6b71d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -862,6 +862,8 @@
#define PCI_DEVICE_ID_TI_X620 0xac8d
#define PCI_DEVICE_ID_TI_X420 0xac8e
#define PCI_DEVICE_ID_TI_XX20_FM 0xac8f
+#define PCI_DEVICE_ID_TI_DRA74x 0xb500
+#define PCI_DEVICE_ID_TI_DRA72x 0xb501
#define PCI_VENDOR_ID_SONY 0x104d
diff --git a/include/linux/platform_data/iommu-omap.h b/include/linux/platform_data/iommu-omap.h
index 0496d17..e8b12db 100644
--- a/include/linux/platform_data/iommu-omap.h
+++ b/include/linux/platform_data/iommu-omap.h
@@ -12,28 +12,8 @@
#include <linux/platform_device.h>
-#define MMU_REG_SIZE 256
-
-/**
- * struct iommu_arch_data - omap iommu private data
- * @name: name of the iommu device
- * @iommu_dev: handle of the iommu device
- *
- * This is an omap iommu private data object, which binds an iommu user
- * to its iommu device. This object should be placed at the iommu user's
- * dev_archdata so generic IOMMU API can be used without having to
- * utilize omap-specific plumbing anymore.
- */
-struct omap_iommu_arch_data {
- const char *name;
- struct omap_iommu *iommu_dev;
-};
-
struct iommu_platform_data {
- const char *name;
const char *reset_name;
- int nr_tlb_entries;
-
int (*assert_reset)(struct platform_device *pdev, const char *name);
int (*deassert_reset)(struct platform_device *pdev, const char *name);
};
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 9b6abe6..b7803a2 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -118,6 +118,7 @@ struct generic_pm_domain_data {
struct pm_domain_data base;
struct gpd_timing_data td;
struct notifier_block nb;
+ void *data;
};
#ifdef CONFIG_PM_GENERIC_DOMAINS
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 571257e..e10f274 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -198,7 +198,7 @@ extern void wake_up_klogd(void);
char *log_buf_addr_get(void);
u32 log_buf_len_get(void);
-void log_buf_kexec_setup(void);
+void log_buf_vmcoreinfo_setup(void);
void __init setup_log_buf(int early);
__printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
void dump_stack_print_info(const char *log_lvl);
@@ -246,7 +246,7 @@ static inline u32 log_buf_len_get(void)
return 0;
}
-static inline void log_buf_kexec_setup(void)
+static inline void log_buf_vmcoreinfo_setup(void)
{
}
diff --git a/include/linux/proc_ns.h b/include/linux/proc_ns.h
index 12cb8bd..58ab28d 100644
--- a/include/linux/proc_ns.h
+++ b/include/linux/proc_ns.h
@@ -14,6 +14,7 @@ struct inode;
struct proc_ns_operations {
const char *name;
+ const char *real_ns_name;
int type;
struct ns_common *(*get)(struct task_struct *task);
void (*put)(struct ns_common *ns);
@@ -26,6 +27,7 @@ extern const struct proc_ns_operations netns_operations;
extern const struct proc_ns_operations utsns_operations;
extern const struct proc_ns_operations ipcns_operations;
extern const struct proc_ns_operations pidns_operations;
+extern const struct proc_ns_operations pidns_for_children_operations;
extern const struct proc_ns_operations userns_operations;
extern const struct proc_ns_operations mntns_operations;
extern const struct proc_ns_operations cgroupns_operations;
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index d32f6f1..e538047 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -40,6 +40,9 @@ extern int qcom_scm_pas_shutdown(u32 peripheral);
extern void qcom_scm_cpu_power_down(u32 flags);
extern u32 qcom_scm_get_version(void);
extern int qcom_scm_set_remote_state(u32 state, u32 id);
+extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
+extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
+extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
#else
static inline
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
@@ -67,5 +70,8 @@ static inline void qcom_scm_cpu_power_down(u32 flags) {}
static inline u32 qcom_scm_get_version(void) { return 0; }
static inline u32
qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
+static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
+static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
+static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
#endif
#endif
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 9daabe1..2b24a69 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -191,4 +191,16 @@ static inline void memalloc_nofs_restore(unsigned int flags)
current->flags = (current->flags & ~PF_MEMALLOC_NOFS) | flags;
}
+static inline unsigned int memalloc_noreclaim_save(void)
+{
+ unsigned int flags = current->flags & PF_MEMALLOC;
+ current->flags |= PF_MEMALLOC;
+ return flags;
+}
+
+static inline void memalloc_noreclaim_restore(unsigned int flags)
+{
+ current->flags = (current->flags & ~PF_MEMALLOC) | flags;
+}
+
#endif /* _LINUX_SCHED_MM_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 4fc222f..9edec92 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -10,8 +10,7 @@ struct task_struct;
/* One sem_array data structure for each set of semaphores in the system. */
struct sem_array {
- struct kern_ipc_perm ____cacheline_aligned_in_smp
- sem_perm; /* permissions .. see ipc.h */
+ struct kern_ipc_perm sem_perm; /* permissions .. see ipc.h */
time_t sem_ctime; /* last change time */
struct sem *sem_base; /* ptr to first semaphore in array */
struct list_head pending_alter; /* pending operations */
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index 37395b8..cda76c6 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -41,12 +41,16 @@ struct serdev_device_ops {
* @nr: Device number on serdev bus.
* @ctrl: serdev controller managing this device.
* @ops: Device operations.
+ * @write_comp Completion used by serdev_device_write() internally
+ * @write_lock Lock to serialize access when writing data
*/
struct serdev_device {
struct device dev;
int nr;
struct serdev_controller *ctrl;
const struct serdev_device_ops *ops;
+ struct completion write_comp;
+ struct mutex write_lock;
};
static inline struct serdev_device *to_serdev_device(struct device *d)
@@ -170,7 +174,7 @@ static inline void serdev_controller_write_wakeup(struct serdev_controller *ctrl
if (!serdev || !serdev->ops->write_wakeup)
return;
- serdev->ops->write_wakeup(ctrl->serdev);
+ serdev->ops->write_wakeup(serdev);
}
static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
@@ -182,7 +186,7 @@ static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
if (!serdev || !serdev->ops->receive_buf)
return -EINVAL;
- return serdev->ops->receive_buf(ctrl->serdev, data, count);
+ return serdev->ops->receive_buf(serdev, data, count);
}
#if IS_ENABLED(CONFIG_SERIAL_DEV_BUS)
@@ -194,7 +198,8 @@ void serdev_device_set_flow_control(struct serdev_device *, bool);
void serdev_device_wait_until_sent(struct serdev_device *, long);
int serdev_device_get_tiocm(struct serdev_device *);
int serdev_device_set_tiocm(struct serdev_device *, int, int);
-int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
+void serdev_device_write_wakeup(struct serdev_device *);
+int serdev_device_write(struct serdev_device *, const unsigned char *, size_t, unsigned long);
void serdev_device_write_flush(struct serdev_device *);
int serdev_device_write_room(struct serdev_device *);
@@ -240,7 +245,8 @@ static inline int serdev_device_set_tiocm(struct serdev_device *serdev, int set,
{
return -ENOTSUPP;
}
-static inline int serdev_device_write_buf(struct serdev_device *sdev, const unsigned char *buf, size_t count)
+static inline int serdev_device_write(struct serdev_device *sdev, const unsigned char *buf,
+ size_t count, unsigned long timeout)
{
return -ENODEV;
}
@@ -306,4 +312,11 @@ static inline struct device *serdev_tty_port_register(struct tty_port *port,
static inline void serdev_tty_port_unregister(struct tty_port *port) {}
#endif /* CONFIG_SERIAL_DEV_CTRL_TTYPORT */
+static inline int serdev_device_write_buf(struct serdev_device *serdev,
+ const unsigned char *data,
+ size_t count)
+{
+ return serdev_device_write(serdev, data, count, 0);
+}
+
#endif /*_LINUX_SERDEV_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 58484fb..64d892f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -247,6 +247,7 @@ struct uart_port {
unsigned char suspended;
unsigned char irq_wake;
unsigned char unused[2];
+ const char *name; /* port name */
struct attribute_group *attr_group; /* port specific attributes */
const struct attribute_group **tty_groups; /* all attributes (serial core use only) */
struct serial_rs485 rs485;
diff --git a/include/linux/time.h b/include/linux/time.h
index 23f0f5c..c0543f5 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -151,9 +151,6 @@ static inline bool timespec_inject_offset_valid(const struct timespec *ts)
return true;
}
-#define CURRENT_TIME (current_kernel_time())
-#define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 })
-
/* Some architectures do not supply their own clocksource.
* This is mainly the case in architectures that get their
* inter-tick times by reading the counter on their interval
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1017e904..d07cd21 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -390,7 +390,6 @@ static inline bool tty_throttled(struct tty_struct *tty)
}
#ifdef CONFIG_TTY
-extern void console_init(void);
extern void tty_kref_put(struct tty_struct *tty);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
extern void tty_vhangup_self(void);
@@ -402,8 +401,6 @@ extern struct tty_struct *get_current_tty(void);
extern int __init tty_init(void);
extern const char *tty_name(const struct tty_struct *tty);
#else
-static inline void console_init(void)
-{ }
static inline void tty_kref_put(struct tty_struct *tty)
{ }
static inline struct pid *tty_get_pgrp(struct tty_struct *tty)
@@ -478,9 +475,13 @@ extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
extern int is_current_pgrp_orphaned(void);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
+extern void tty_vhangup_session(struct tty_struct *tty);
extern int tty_hung_up_p(struct file *filp);
extern void do_SAK(struct tty_struct *tty);
extern void __do_SAK(struct tty_struct *tty);
+extern void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty);
+extern int tty_signal_session_leader(struct tty_struct *tty, int exit_session);
+extern void session_clear_tty(struct pid *session);
extern void no_tty(void);
extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld);
@@ -528,6 +529,8 @@ extern void tty_ldisc_flush(struct tty_struct *tty);
extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
+extern long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct file *file, unsigned int cmd, unsigned long arg);
extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
extern void tty_default_fops(struct file_operations *fops);
extern struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx);
@@ -669,7 +672,11 @@ extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p,
/* n_tty.c */
extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
+#ifdef CONFIG_TTY
extern void __init n_tty_init(void);
+#else
+static inline void n_tty_init(void) { }
+#endif
/* tty_audit.c */
#ifdef CONFIG_AUDIT
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index e0cbfb09..201418d 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -203,7 +203,6 @@ static __always_inline void pagefault_disabled_inc(void)
static __always_inline void pagefault_disabled_dec(void)
{
current->pagefault_disabled--;
- WARN_ON(current->pagefault_disabled < 0);
}
/*
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index d68edff..0328ce0 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -6,6 +6,7 @@
#include <linux/list.h>
#include <linux/llist.h>
#include <asm/page.h> /* pgprot_t */
+#include <asm/pgtable.h> /* PAGE_KERNEL */
#include <linux/rbtree.h>
struct vm_area_struct; /* vma defining user mapping in mm_types.h */
@@ -80,6 +81,25 @@ extern void *__vmalloc_node_range(unsigned long size, unsigned long align,
unsigned long start, unsigned long end, gfp_t gfp_mask,
pgprot_t prot, unsigned long vm_flags, int node,
const void *caller);
+#ifndef CONFIG_MMU
+extern void *__vmalloc_node_flags(unsigned long size, int node, gfp_t flags);
+#else
+extern void *__vmalloc_node(unsigned long size, unsigned long align,
+ gfp_t gfp_mask, pgprot_t prot,
+ int node, const void *caller);
+
+/*
+ * We really want to have this inlined due to caller tracking. This
+ * function is used by the highlevel vmalloc apis and so we want to track
+ * their callers and inlining will achieve that.
+ */
+static inline void *__vmalloc_node_flags(unsigned long size,
+ int node, gfp_t flags)
+{
+ return __vmalloc_node(size, 1, flags, PAGE_KERNEL,
+ node, __builtin_return_address(0));
+}
+#endif
extern void vfree(const void *addr);
extern void vfree_atomic(const void *addr);
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 2452e64..b43a4ee 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -20,6 +20,8 @@
#define ADDRCONF_TIMER_FUZZ (HZ / 4)
#define ADDRCONF_TIMER_FUZZ_MAX (HZ)
+#define ADDRCONF_NOTIFY_PRIORITY 0
+
#include <linux/in.h>
#include <linux/in6.h>
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 15d6599..b083e6c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1666,7 +1666,7 @@ struct cfg80211_bss_select_adjust {
* (others are filtered out).
* If ommited, all results are passed.
* @n_match_sets: number of match sets
- * @results_wk: worker for processing results notification.
+ * @report_results: indicates that results were reported for this request
* @wiphy: the wiphy this was for
* @dev: the interface
* @scan_start: start time of the scheduled scan
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4d05a94..76ed24a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1141,7 +1141,6 @@ enum mac80211_rx_flags {
* enum mac80211_rx_encoding_flags - MCS & bandwidth flags
*
* @RX_ENC_FLAG_SHORTPRE: Short preamble was used for this frame
- * @RX_ENC_FLAG_40MHZ: HT40 (40 MHz) was used
* @RX_ENC_FLAG_SHORT_GI: Short guard interval was used
* @RX_ENC_FLAG_HT_GF: This frame was received in a HT-greenfield transmission,
* if the driver fills this value it should add
@@ -1153,7 +1152,6 @@ enum mac80211_rx_flags {
*/
enum mac80211_rx_encoding_flags {
RX_ENC_FLAG_SHORTPRE = BIT(0),
- RX_ENC_FLAG_40MHZ = BIT(1),
RX_ENC_FLAG_SHORT_GI = BIT(2),
RX_ENC_FLAG_HT_GF = BIT(3),
RX_ENC_FLAG_STBC_MASK = BIT(4) | BIT(5),
diff --git a/include/net/secure_seq.h b/include/net/secure_seq.h
index fe236b3..b94006f 100644
--- a/include/net/secure_seq.h
+++ b/include/net/secure_seq.h
@@ -6,10 +6,12 @@
u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
__be16 dport);
-u32 secure_tcp_seq_and_tsoff(__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport, u32 *tsoff);
-u32 secure_tcpv6_seq_and_tsoff(const __be32 *saddr, const __be32 *daddr,
- __be16 sport, __be16 dport, u32 *tsoff);
+u32 secure_tcp_seq(__be32 saddr, __be32 daddr,
+ __be16 sport, __be16 dport);
+u32 secure_tcp_ts_off(__be32 saddr, __be32 daddr);
+u32 secure_tcpv6_seq(const __be32 *saddr, const __be32 *daddr,
+ __be16 sport, __be16 dport);
+u32 secure_tcpv6_ts_off(const __be32 *saddr, const __be32 *daddr);
u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
__be16 sport, __be16 dport);
u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 270e5cc..38a7427 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -470,7 +470,7 @@ void inet_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb);
/* From syncookies.c */
struct sock *tcp_get_cookie_sock(struct sock *sk, struct sk_buff *skb,
struct request_sock *req,
- struct dst_entry *dst);
+ struct dst_entry *dst, u32 tsoff);
int __cookie_v4_check(const struct iphdr *iph, const struct tcphdr *th,
u32 cookie);
struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb);
@@ -1234,10 +1234,12 @@ void tcp_cwnd_restart(struct sock *sk, s32 delta);
static inline void tcp_slow_start_after_idle_check(struct sock *sk)
{
+ const struct tcp_congestion_ops *ca_ops = inet_csk(sk)->icsk_ca_ops;
struct tcp_sock *tp = tcp_sk(sk);
s32 delta;
- if (!sysctl_tcp_slow_start_after_idle || tp->packets_out)
+ if (!sysctl_tcp_slow_start_after_idle || tp->packets_out ||
+ ca_ops->cong_control)
return;
delta = tcp_time_stamp - tp->lsndtime;
if (delta > inet_csk(sk)->icsk_rto)
@@ -1822,7 +1824,8 @@ struct tcp_request_sock_ops {
#endif
struct dst_entry *(*route_req)(const struct sock *sk, struct flowi *fl,
const struct request_sock *req);
- __u32 (*init_seq_tsoff)(const struct sk_buff *skb, u32 *tsoff);
+ u32 (*init_seq)(const struct sk_buff *skb);
+ u32 (*init_ts_off)(const struct sk_buff *skb);
int (*send_synack)(const struct sock *sk, struct dst_entry *dst,
struct flowi *fl, struct request_sock *req,
struct tcp_fastopen_cookie *foc,
diff --git a/include/rdma/rdmavt_qp.h b/include/rdma/rdmavt_qp.h
index 1d8141a..be6472e5 100644
--- a/include/rdma/rdmavt_qp.h
+++ b/include/rdma/rdmavt_qp.h
@@ -324,6 +324,7 @@ struct rvt_qp {
u8 r_state; /* opcode of last packet received */
u8 r_flags;
u8 r_head_ack_queue; /* index into s_ack_queue[] */
+ u8 r_adefered; /* defered ack count */
struct list_head rspwait; /* link for waiting to respond */
diff --git a/arch/arm/mach-tegra/flowctrl.h b/include/soc/tegra/flowctrl.h
similarity index 77%
rename from arch/arm/mach-tegra/flowctrl.h
rename to include/soc/tegra/flowctrl.h
index 73a9c50..8f86aea 100644
--- a/arch/arm/mach-tegra/flowctrl.h
+++ b/include/soc/tegra/flowctrl.h
@@ -1,7 +1,5 @@
/*
- * arch/arm/mach-tegra/flowctrl.h
- *
- * functions and macros to control the flowcontroller
+ * Functions and macros to control the flowcontroller
*
* Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
*
@@ -18,8 +16,8 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef __MACH_TEGRA_FLOWCTRL_H
-#define __MACH_TEGRA_FLOWCTRL_H
+#ifndef __SOC_TEGRA_FLOWCTRL_H__
+#define __SOC_TEGRA_FLOWCTRL_H__
#define FLOW_CTRL_HALT_CPU0_EVENTS 0x0
#define FLOW_CTRL_WAITEVENT (2 << 29)
@@ -53,14 +51,32 @@
#define TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP (0xF << 8)
#ifndef __ASSEMBLY__
+#ifdef CONFIG_SOC_TEGRA_FLOWCTRL
u32 flowctrl_read_cpu_csr(unsigned int cpuid);
void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value);
void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value);
void flowctrl_cpu_suspend_enter(unsigned int cpuid);
void flowctrl_cpu_suspend_exit(unsigned int cpuid);
+#else
+static inline u32 flowctrl_read_cpu_csr(unsigned int cpuid)
+{
+ return 0;
+}
-void tegra_flowctrl_init(void);
-#endif
+static inline void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
+{
+}
-#endif
+static inline void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value) {}
+
+static inline void flowctrl_cpu_suspend_enter(unsigned int cpuid)
+{
+}
+
+static inline void flowctrl_cpu_suspend_exit(unsigned int cpuid)
+{
+}
+#endif /* CONFIG_SOC_TEGRA_FLOWCTRL */
+#endif /* __ASSEMBLY */
+#endif /* __SOC_TEGRA_FLOWCTRL_H__ */
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index 2f271d1..1c3982b 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -26,12 +26,6 @@
struct clk;
struct reset_control;
-#ifdef CONFIG_PM_SLEEP
-enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
-void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
-void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
-#endif /* CONFIG_PM_SLEEP */
-
#ifdef CONFIG_SMP
bool tegra_pmc_cpu_is_powered(unsigned int cpuid);
int tegra_pmc_cpu_power_on(unsigned int cpuid);
@@ -144,7 +138,7 @@ enum tegra_io_pad_voltage {
TEGRA_IO_PAD_3300000UV,
};
-#ifdef CONFIG_ARCH_TEGRA
+#ifdef CONFIG_SOC_TEGRA_PMC
int tegra_powergate_is_powered(unsigned int id);
int tegra_powergate_power_on(unsigned int id);
int tegra_powergate_power_off(unsigned int id);
@@ -163,6 +157,11 @@ int tegra_io_pad_get_voltage(enum tegra_io_pad id);
/* deprecated, use tegra_io_pad_power_{enable,disable}() instead */
int tegra_io_rail_power_on(unsigned int id);
int tegra_io_rail_power_off(unsigned int id);
+
+enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
+void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
+
#else
static inline int tegra_powergate_is_powered(unsigned int id)
{
@@ -221,6 +220,20 @@ static inline int tegra_io_rail_power_off(unsigned int id)
{
return -ENOSYS;
}
-#endif /* CONFIG_ARCH_TEGRA */
+
+static inline enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
+{
+ return TEGRA_SUSPEND_NONE;
+}
+
+static inline void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
+{
+}
+
+static inline void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
+{
+}
+
+#endif /* CONFIG_SOC_TEGRA_PMC */
#endif /* __SOC_TEGRA_PMC_H__ */
diff --git a/include/trace/events/fs_dax.h b/include/trace/events/fs_dax.h
index c566ddc..08bb3ed 100644
--- a/include/trace/events/fs_dax.h
+++ b/include/trace/events/fs_dax.h
@@ -150,6 +150,136 @@ DEFINE_EVENT(dax_pmd_insert_mapping_class, name, \
DEFINE_PMD_INSERT_MAPPING_EVENT(dax_pmd_insert_mapping);
DEFINE_PMD_INSERT_MAPPING_EVENT(dax_pmd_insert_mapping_fallback);
+DECLARE_EVENT_CLASS(dax_pte_fault_class,
+ TP_PROTO(struct inode *inode, struct vm_fault *vmf, int result),
+ TP_ARGS(inode, vmf, result),
+ TP_STRUCT__entry(
+ __field(unsigned long, ino)
+ __field(unsigned long, vm_flags)
+ __field(unsigned long, address)
+ __field(pgoff_t, pgoff)
+ __field(dev_t, dev)
+ __field(unsigned int, flags)
+ __field(int, result)
+ ),
+ TP_fast_assign(
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = inode->i_ino;
+ __entry->vm_flags = vmf->vma->vm_flags;
+ __entry->address = vmf->address;
+ __entry->flags = vmf->flags;
+ __entry->pgoff = vmf->pgoff;
+ __entry->result = result;
+ ),
+ TP_printk("dev %d:%d ino %#lx %s %s address %#lx pgoff %#lx %s",
+ MAJOR(__entry->dev),
+ MINOR(__entry->dev),
+ __entry->ino,
+ __entry->vm_flags & VM_SHARED ? "shared" : "private",
+ __print_flags(__entry->flags, "|", FAULT_FLAG_TRACE),
+ __entry->address,
+ __entry->pgoff,
+ __print_flags(__entry->result, "|", VM_FAULT_RESULT_TRACE)
+ )
+)
+
+#define DEFINE_PTE_FAULT_EVENT(name) \
+DEFINE_EVENT(dax_pte_fault_class, name, \
+ TP_PROTO(struct inode *inode, struct vm_fault *vmf, int result), \
+ TP_ARGS(inode, vmf, result))
+
+DEFINE_PTE_FAULT_EVENT(dax_pte_fault);
+DEFINE_PTE_FAULT_EVENT(dax_pte_fault_done);
+DEFINE_PTE_FAULT_EVENT(dax_pfn_mkwrite_no_entry);
+DEFINE_PTE_FAULT_EVENT(dax_pfn_mkwrite);
+DEFINE_PTE_FAULT_EVENT(dax_load_hole);
+
+TRACE_EVENT(dax_insert_mapping,
+ TP_PROTO(struct inode *inode, struct vm_fault *vmf, void *radix_entry),
+ TP_ARGS(inode, vmf, radix_entry),
+ TP_STRUCT__entry(
+ __field(unsigned long, ino)
+ __field(unsigned long, vm_flags)
+ __field(unsigned long, address)
+ __field(void *, radix_entry)
+ __field(dev_t, dev)
+ __field(int, write)
+ ),
+ TP_fast_assign(
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = inode->i_ino;
+ __entry->vm_flags = vmf->vma->vm_flags;
+ __entry->address = vmf->address;
+ __entry->write = vmf->flags & FAULT_FLAG_WRITE;
+ __entry->radix_entry = radix_entry;
+ ),
+ TP_printk("dev %d:%d ino %#lx %s %s address %#lx radix_entry %#lx",
+ MAJOR(__entry->dev),
+ MINOR(__entry->dev),
+ __entry->ino,
+ __entry->vm_flags & VM_SHARED ? "shared" : "private",
+ __entry->write ? "write" : "read",
+ __entry->address,
+ (unsigned long)__entry->radix_entry
+ )
+)
+
+DECLARE_EVENT_CLASS(dax_writeback_range_class,
+ TP_PROTO(struct inode *inode, pgoff_t start_index, pgoff_t end_index),
+ TP_ARGS(inode, start_index, end_index),
+ TP_STRUCT__entry(
+ __field(unsigned long, ino)
+ __field(pgoff_t, start_index)
+ __field(pgoff_t, end_index)
+ __field(dev_t, dev)
+ ),
+ TP_fast_assign(
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = inode->i_ino;
+ __entry->start_index = start_index;
+ __entry->end_index = end_index;
+ ),
+ TP_printk("dev %d:%d ino %#lx pgoff %#lx-%#lx",
+ MAJOR(__entry->dev),
+ MINOR(__entry->dev),
+ __entry->ino,
+ __entry->start_index,
+ __entry->end_index
+ )
+)
+
+#define DEFINE_WRITEBACK_RANGE_EVENT(name) \
+DEFINE_EVENT(dax_writeback_range_class, name, \
+ TP_PROTO(struct inode *inode, pgoff_t start_index, pgoff_t end_index),\
+ TP_ARGS(inode, start_index, end_index))
+
+DEFINE_WRITEBACK_RANGE_EVENT(dax_writeback_range);
+DEFINE_WRITEBACK_RANGE_EVENT(dax_writeback_range_done);
+
+TRACE_EVENT(dax_writeback_one,
+ TP_PROTO(struct inode *inode, pgoff_t pgoff, pgoff_t pglen),
+ TP_ARGS(inode, pgoff, pglen),
+ TP_STRUCT__entry(
+ __field(unsigned long, ino)
+ __field(pgoff_t, pgoff)
+ __field(pgoff_t, pglen)
+ __field(dev_t, dev)
+ ),
+ TP_fast_assign(
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = inode->i_ino;
+ __entry->pgoff = pgoff;
+ __entry->pglen = pglen;
+ ),
+ TP_printk("dev %d:%d ino %#lx pgoff %#lx pglen %#lx",
+ MAJOR(__entry->dev),
+ MINOR(__entry->dev),
+ __entry->ino,
+ __entry->pgoff,
+ __entry->pglen
+ )
+)
+
#endif /* _TRACE_FS_DAX_H */
/* This part must be outside protection */
diff --git a/include/trace/events/iommu.h b/include/trace/events/iommu.h
index 2c7befb..99254ed 100644
--- a/include/trace/events/iommu.h
+++ b/include/trace/events/iommu.h
@@ -11,7 +11,6 @@
#define _TRACE_IOMMU_H
#include <linux/tracepoint.h>
-#include <linux/pci.h>
struct device;
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 6b0e275..662c592 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -333,6 +333,7 @@
header-y += patchkey.h
header-y += pci.h
header-y += pci_regs.h
+header-y += pcitest.h
header-y += perf_event.h
header-y += personality.h
header-y += pfkeyv2.h
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index 176b6cb..b5280db 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -419,7 +419,7 @@ typedef struct elf64_shdr {
#define NT_METAG_CBUF 0x500 /* Metag catch buffer registers */
#define NT_METAG_RPIPE 0x501 /* Metag read pipeline state */
#define NT_METAG_TLS 0x502 /* Metag TLS pointer */
-
+#define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */
/* Note header in a PT_NOTE section */
typedef struct elf32_note {
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 5f4ea28..d179d77 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1494,6 +1494,7 @@ enum ethtool_link_mode_bit_indices {
#define SPEED_2500 2500
#define SPEED_5000 5000
#define SPEED_10000 10000
+#define SPEED_14000 14000
#define SPEED_20000 20000
#define SPEED_25000 25000
#define SPEED_40000 40000
diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h
index 7b26a62..b9095a2 100644
--- a/include/uapi/linux/ipmi.h
+++ b/include/uapi/linux/ipmi.h
@@ -355,7 +355,7 @@ struct ipmi_cmdspec {
#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \
struct ipmi_cmdspec)
/*
- * Unregister a regsitered command. error values:
+ * Unregister a registered command. error values:
* - EFAULT - an address supplied was invalid.
* - ENOENT - The netfn/cmd was not found registered for this user.
*/
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 18a26c1..d56bb00 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -114,7 +114,7 @@
#define PCI_SUBSYSTEM_ID 0x2e
#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
#define PCI_ROM_ADDRESS_ENABLE 0x01
-#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
+#define PCI_ROM_ADDRESS_MASK (~0x7ffU)
#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
diff --git a/include/uapi/linux/pcitest.h b/include/uapi/linux/pcitest.h
new file mode 100644
index 0000000..a6aa10c4
--- /dev/null
+++ b/include/uapi/linux/pcitest.h
@@ -0,0 +1,19 @@
+/**
+ * pcitest.h - PCI test uapi defines
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ */
+
+#ifndef __UAPI_LINUX_PCITEST_H
+#define __UAPI_LINUX_PCITEST_H
+
+#define PCITEST_BAR _IO('P', 0x1)
+#define PCITEST_LEGACY_IRQ _IO('P', 0x2)
+#define PCITEST_MSI _IOW('P', 0x3, int)
+#define PCITEST_WRITE _IOW('P', 0x4, unsigned long)
+#define PCITEST_READ _IOW('P', 0x5, unsigned long)
+#define PCITEST_COPY _IOW('P', 0x6, unsigned long)
+
+#endif /* __UAPI_LINUX_PCITEST_H */
diff --git a/include/uapi/linux/switchtec_ioctl.h b/include/uapi/linux/switchtec_ioctl.h
new file mode 100644
index 0000000..3e824e1
--- /dev/null
+++ b/include/uapi/linux/switchtec_ioctl.h
@@ -0,0 +1,132 @@
+/*
+ * Microsemi Switchtec PCIe Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _UAPI_LINUX_SWITCHTEC_IOCTL_H
+#define _UAPI_LINUX_SWITCHTEC_IOCTL_H
+
+#include <linux/types.h>
+
+#define SWITCHTEC_IOCTL_PART_CFG0 0
+#define SWITCHTEC_IOCTL_PART_CFG1 1
+#define SWITCHTEC_IOCTL_PART_IMG0 2
+#define SWITCHTEC_IOCTL_PART_IMG1 3
+#define SWITCHTEC_IOCTL_PART_NVLOG 4
+#define SWITCHTEC_IOCTL_PART_VENDOR0 5
+#define SWITCHTEC_IOCTL_PART_VENDOR1 6
+#define SWITCHTEC_IOCTL_PART_VENDOR2 7
+#define SWITCHTEC_IOCTL_PART_VENDOR3 8
+#define SWITCHTEC_IOCTL_PART_VENDOR4 9
+#define SWITCHTEC_IOCTL_PART_VENDOR5 10
+#define SWITCHTEC_IOCTL_PART_VENDOR6 11
+#define SWITCHTEC_IOCTL_PART_VENDOR7 12
+#define SWITCHTEC_IOCTL_NUM_PARTITIONS 13
+
+struct switchtec_ioctl_flash_info {
+ __u64 flash_length;
+ __u32 num_partitions;
+ __u32 padding;
+};
+
+struct switchtec_ioctl_flash_part_info {
+ __u32 flash_partition;
+ __u32 address;
+ __u32 length;
+ __u32 active;
+};
+
+struct switchtec_ioctl_event_summary {
+ __u64 global;
+ __u64 part_bitmap;
+ __u32 local_part;
+ __u32 padding;
+ __u32 part[48];
+ __u32 pff[48];
+};
+
+#define SWITCHTEC_IOCTL_EVENT_STACK_ERROR 0
+#define SWITCHTEC_IOCTL_EVENT_PPU_ERROR 1
+#define SWITCHTEC_IOCTL_EVENT_ISP_ERROR 2
+#define SWITCHTEC_IOCTL_EVENT_SYS_RESET 3
+#define SWITCHTEC_IOCTL_EVENT_FW_EXC 4
+#define SWITCHTEC_IOCTL_EVENT_FW_NMI 5
+#define SWITCHTEC_IOCTL_EVENT_FW_NON_FATAL 6
+#define SWITCHTEC_IOCTL_EVENT_FW_FATAL 7
+#define SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP 8
+#define SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP_ASYNC 9
+#define SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP 10
+#define SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP_ASYNC 11
+#define SWITCHTEC_IOCTL_EVENT_GPIO_INT 12
+#define SWITCHTEC_IOCTL_EVENT_PART_RESET 13
+#define SWITCHTEC_IOCTL_EVENT_MRPC_COMP 14
+#define SWITCHTEC_IOCTL_EVENT_MRPC_COMP_ASYNC 15
+#define SWITCHTEC_IOCTL_EVENT_DYN_PART_BIND_COMP 16
+#define SWITCHTEC_IOCTL_EVENT_AER_IN_P2P 17
+#define SWITCHTEC_IOCTL_EVENT_AER_IN_VEP 18
+#define SWITCHTEC_IOCTL_EVENT_DPC 19
+#define SWITCHTEC_IOCTL_EVENT_CTS 20
+#define SWITCHTEC_IOCTL_EVENT_HOTPLUG 21
+#define SWITCHTEC_IOCTL_EVENT_IER 22
+#define SWITCHTEC_IOCTL_EVENT_THRESH 23
+#define SWITCHTEC_IOCTL_EVENT_POWER_MGMT 24
+#define SWITCHTEC_IOCTL_EVENT_TLP_THROTTLING 25
+#define SWITCHTEC_IOCTL_EVENT_FORCE_SPEED 26
+#define SWITCHTEC_IOCTL_EVENT_CREDIT_TIMEOUT 27
+#define SWITCHTEC_IOCTL_EVENT_LINK_STATE 28
+#define SWITCHTEC_IOCTL_MAX_EVENTS 29
+
+#define SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX -1
+#define SWITCHTEC_IOCTL_EVENT_IDX_ALL -2
+
+#define SWITCHTEC_IOCTL_EVENT_FLAG_CLEAR (1 << 0)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL (1 << 1)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG (1 << 2)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI (1 << 3)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL (1 << 4)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_POLL (1 << 5)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_LOG (1 << 6)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_CLI (1 << 7)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_FATAL (1 << 8)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_UNUSED (~0x1ff)
+
+struct switchtec_ioctl_event_ctl {
+ __u32 event_id;
+ __s32 index;
+ __u32 flags;
+ __u32 occurred;
+ __u32 count;
+ __u32 data[5];
+};
+
+#define SWITCHTEC_IOCTL_PFF_VEP 100
+struct switchtec_ioctl_pff_port {
+ __u32 pff;
+ __u32 partition;
+ __u32 port;
+};
+
+#define SWITCHTEC_IOCTL_FLASH_INFO \
+ _IOR('W', 0x40, struct switchtec_ioctl_flash_info)
+#define SWITCHTEC_IOCTL_FLASH_PART_INFO \
+ _IOWR('W', 0x41, struct switchtec_ioctl_flash_part_info)
+#define SWITCHTEC_IOCTL_EVENT_SUMMARY \
+ _IOR('W', 0x42, struct switchtec_ioctl_event_summary)
+#define SWITCHTEC_IOCTL_EVENT_CTL \
+ _IOWR('W', 0x43, struct switchtec_ioctl_event_ctl)
+#define SWITCHTEC_IOCTL_PFF_TO_PORT \
+ _IOWR('W', 0x44, struct switchtec_ioctl_pff_port)
+#define SWITCHTEC_IOCTL_PORT_TO_PFF \
+ _IOWR('W', 0x45, struct switchtec_ioctl_pff_port)
+
+#endif
diff --git a/init/do_mounts.h b/init/do_mounts.h
index 067af1d..282d65b 100644
--- a/init/do_mounts.h
+++ b/init/do_mounts.h
@@ -19,29 +19,15 @@ static inline int create_dev(char *name, dev_t dev)
return sys_mknod(name, S_IFBLK|0600, new_encode_dev(dev));
}
-#if BITS_PER_LONG == 32
static inline u32 bstat(char *name)
{
- struct stat64 stat;
- if (sys_stat64(name, &stat) != 0)
+ struct kstat stat;
+ if (vfs_stat(name, &stat) != 0)
return 0;
- if (!S_ISBLK(stat.st_mode))
+ if (!S_ISBLK(stat.mode))
return 0;
- if (stat.st_rdev != (u32)stat.st_rdev)
- return 0;
- return stat.st_rdev;
+ return stat.rdev;
}
-#else
-static inline u32 bstat(char *name)
-{
- struct stat stat;
- if (sys_newstat(name, &stat) != 0)
- return 0;
- if (!S_ISBLK(stat.st_mode))
- return 0;
- return stat.st_rdev;
-}
-#endif
#ifdef CONFIG_BLK_DEV_RAM
diff --git a/init/initramfs.c b/init/initramfs.c
index 8daf7ac..8a53205 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -312,10 +312,10 @@ static int __init maybe_link(void)
static void __init clean_path(char *path, umode_t fmode)
{
- struct stat st;
+ struct kstat st;
- if (!sys_newlstat(path, &st) && (st.st_mode ^ fmode) & S_IFMT) {
- if (S_ISDIR(st.st_mode))
+ if (!vfs_lstat(path, &st) && (st.mode ^ fmode) & S_IFMT) {
+ if (S_ISDIR(st.mode))
sys_rmdir(path);
else
sys_unlink(path);
@@ -581,13 +581,13 @@ static void __init clean_rootfs(void)
num = sys_getdents64(fd, dirp, BUF_SIZE);
while (num > 0) {
while (num > 0) {
- struct stat st;
+ struct kstat st;
int ret;
- ret = sys_newlstat(dirp->d_name, &st);
+ ret = vfs_lstat(dirp->d_name, &st);
WARN_ON_ONCE(ret);
if (!ret) {
- if (S_ISDIR(st.st_mode))
+ if (S_ISDIR(st.mode))
sys_rmdir(dirp->d_name);
else
sys_unlink(dirp->d_name);
@@ -613,7 +613,7 @@ static int __init populate_rootfs(void)
if (err)
panic("%s", err); /* Failed to decompress INTERNAL initramfs */
/* If available load the bootloader supplied initrd */
- if (initrd_start) {
+ if (initrd_start && !IS_ENABLED(CONFIG_INITRAMFS_FORCE)) {
#ifdef CONFIG_BLK_DEV_RAM
int fd;
printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");
diff --git a/init/main.c b/init/main.c
index cc48053..f866510 100644
--- a/init/main.c
+++ b/init/main.c
@@ -27,7 +27,7 @@
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <linux/acpi.h>
-#include <linux/tty.h>
+#include <linux/console.h>
#include <linux/nmi.h>
#include <linux/percpu.h>
#include <linux/kmod.h>
diff --git a/ipc/shm.c b/ipc/shm.c
index 481d2a9..34c4344 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -1095,11 +1095,11 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg,
ulong *raddr, unsigned long shmlba)
{
struct shmid_kernel *shp;
- unsigned long addr;
+ unsigned long addr = (unsigned long)shmaddr;
unsigned long size;
struct file *file;
int err;
- unsigned long flags;
+ unsigned long flags = MAP_SHARED;
unsigned long prot;
int acc_mode;
struct ipc_namespace *ns;
@@ -1111,7 +1111,8 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg,
err = -EINVAL;
if (shmid < 0)
goto out;
- else if ((addr = (ulong)shmaddr)) {
+
+ if (addr) {
if (addr & (shmlba - 1)) {
/*
* Round down to the nearest multiple of shmlba.
@@ -1126,13 +1127,10 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg,
#endif
goto out;
}
- flags = MAP_SHARED | MAP_FIXED;
- } else {
- if ((shmflg & SHM_REMAP))
- goto out;
- flags = MAP_SHARED;
- }
+ flags |= MAP_FIXED;
+ } else if ((shmflg & SHM_REMAP))
+ goto out;
if (shmflg & SHM_RDONLY) {
prot = PROT_READ;
diff --git a/ipc/util.c b/ipc/util.c
index 3459a16..caec7b1 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -403,12 +403,7 @@ void ipc_rmid(struct ipc_ids *ids, struct kern_ipc_perm *ipcp)
*/
void *ipc_alloc(int size)
{
- void *out;
- if (size > PAGE_SIZE)
- out = vmalloc(size);
- else
- out = kmalloc(size, GFP_KERNEL);
- return out;
+ return kvmalloc(size, GFP_KERNEL);
}
/**
diff --git a/kernel/Makefile b/kernel/Makefile
index b302b47..72aa080 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -59,6 +59,7 @@
obj-$(CONFIG_MODULE_SIG) += module_signing.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
+obj-$(CONFIG_CRASH_CORE) += crash_core.o
obj-$(CONFIG_KEXEC_CORE) += kexec_core.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_KEXEC_FILE) += kexec_file.o
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 6f81e0f..dedf367 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -76,8 +76,7 @@ void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb, int k, uns
struct bpf_prog *bpf_prog_alloc(unsigned int size, gfp_t gfp_extra_flags)
{
- gfp_t gfp_flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO |
- gfp_extra_flags;
+ gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | gfp_extra_flags;
struct bpf_prog_aux *aux;
struct bpf_prog *fp;
@@ -107,8 +106,7 @@ EXPORT_SYMBOL_GPL(bpf_prog_alloc);
struct bpf_prog *bpf_prog_realloc(struct bpf_prog *fp_old, unsigned int size,
gfp_t gfp_extra_flags)
{
- gfp_t gfp_flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO |
- gfp_extra_flags;
+ gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | gfp_extra_flags;
struct bpf_prog *fp;
u32 pages, delta;
int ret;
@@ -655,8 +653,7 @@ static int bpf_jit_blind_insn(const struct bpf_insn *from,
static struct bpf_prog *bpf_prog_clone_create(struct bpf_prog *fp_other,
gfp_t gfp_extra_flags)
{
- gfp_t gfp_flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO |
- gfp_extra_flags;
+ gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | gfp_extra_flags;
struct bpf_prog *fp;
fp = __vmalloc(fp_other->pages * PAGE_SIZE, gfp_flags, PAGE_KERNEL);
diff --git a/kernel/bpf/inode.c b/kernel/bpf/inode.c
index fddcae8..9bbd334 100644
--- a/kernel/bpf/inode.c
+++ b/kernel/bpf/inode.c
@@ -429,7 +429,7 @@ static int bpf_parse_options(char *data, struct bpf_mount_opts *opts)
static int bpf_fill_super(struct super_block *sb, void *data, int silent)
{
- static struct tree_descr bpf_rfiles[] = { { "" } };
+ static const struct tree_descr bpf_rfiles[] = { { "" } };
struct bpf_mount_opts opts;
struct inode *inode;
int ret;
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 13642c7..fd2411f 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -67,8 +67,7 @@ void *bpf_map_area_alloc(size_t size)
return area;
}
- return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM | flags,
- PAGE_KERNEL);
+ return __vmalloc(size, GFP_KERNEL | flags, PAGE_KERNEL);
}
void bpf_map_area_free(void *area)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index c2ff608..c5b56c9 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -298,7 +298,8 @@ static const char *const bpf_jmp_string[16] = {
[BPF_EXIT >> 4] = "exit",
};
-static void print_bpf_insn(struct bpf_insn *insn)
+static void print_bpf_insn(const struct bpf_verifier_env *env,
+ const struct bpf_insn *insn)
{
u8 class = BPF_CLASS(insn->code);
@@ -362,9 +363,19 @@ static void print_bpf_insn(struct bpf_insn *insn)
insn->code,
bpf_ldst_string[BPF_SIZE(insn->code) >> 3],
insn->src_reg, insn->imm);
- } else if (BPF_MODE(insn->code) == BPF_IMM) {
- verbose("(%02x) r%d = 0x%x\n",
- insn->code, insn->dst_reg, insn->imm);
+ } else if (BPF_MODE(insn->code) == BPF_IMM &&
+ BPF_SIZE(insn->code) == BPF_DW) {
+ /* At this point, we already made sure that the second
+ * part of the ldimm64 insn is accessible.
+ */
+ u64 imm = ((u64)(insn + 1)->imm << 32) | (u32)insn->imm;
+ bool map_ptr = insn->src_reg == BPF_PSEUDO_MAP_FD;
+
+ if (map_ptr && !env->allow_ptr_leaks)
+ imm = 0;
+
+ verbose("(%02x) r%d = 0x%llx\n", insn->code,
+ insn->dst_reg, (unsigned long long)imm);
} else {
verbose("BUG_ld_%02x\n", insn->code);
return;
@@ -2853,7 +2864,7 @@ static int do_check(struct bpf_verifier_env *env)
if (log_level) {
verbose("%d: ", insn_idx);
- print_bpf_insn(insn);
+ print_bpf_insn(env, insn);
}
err = ext_analyzer_insn_hook(env, insn_idx, prev_insn_idx);
diff --git a/kernel/crash_core.c b/kernel/crash_core.c
new file mode 100644
index 0000000..fcbd568
--- /dev/null
+++ b/kernel/crash_core.c
@@ -0,0 +1,439 @@
+/*
+ * crash.c - kernel crash support code.
+ * Copyright (C) 2002-2004 Eric Biederman <ebiederm@xmission.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/crash_core.h>
+#include <linux/utsname.h>
+#include <linux/vmalloc.h>
+
+#include <asm/page.h>
+#include <asm/sections.h>
+
+/* vmcoreinfo stuff */
+static unsigned char vmcoreinfo_data[VMCOREINFO_BYTES];
+u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
+size_t vmcoreinfo_size;
+size_t vmcoreinfo_max_size = sizeof(vmcoreinfo_data);
+
+/*
+ * parsing the "crashkernel" commandline
+ *
+ * this code is intended to be called from architecture specific code
+ */
+
+
+/*
+ * This function parses command lines in the format
+ *
+ * crashkernel=ramsize-range:size[,...][@offset]
+ *
+ * The function returns 0 on success and -EINVAL on failure.
+ */
+static int __init parse_crashkernel_mem(char *cmdline,
+ unsigned long long system_ram,
+ unsigned long long *crash_size,
+ unsigned long long *crash_base)
+{
+ char *cur = cmdline, *tmp;
+
+ /* for each entry of the comma-separated list */
+ do {
+ unsigned long long start, end = ULLONG_MAX, size;
+
+ /* get the start of the range */
+ start = memparse(cur, &tmp);
+ if (cur == tmp) {
+ pr_warn("crashkernel: Memory value expected\n");
+ return -EINVAL;
+ }
+ cur = tmp;
+ if (*cur != '-') {
+ pr_warn("crashkernel: '-' expected\n");
+ return -EINVAL;
+ }
+ cur++;
+
+ /* if no ':' is here, than we read the end */
+ if (*cur != ':') {
+ end = memparse(cur, &tmp);
+ if (cur == tmp) {
+ pr_warn("crashkernel: Memory value expected\n");
+ return -EINVAL;
+ }
+ cur = tmp;
+ if (end <= start) {
+ pr_warn("crashkernel: end <= start\n");
+ return -EINVAL;
+ }
+ }
+
+ if (*cur != ':') {
+ pr_warn("crashkernel: ':' expected\n");
+ return -EINVAL;
+ }
+ cur++;
+
+ size = memparse(cur, &tmp);
+ if (cur == tmp) {
+ pr_warn("Memory value expected\n");
+ return -EINVAL;
+ }
+ cur = tmp;
+ if (size >= system_ram) {
+ pr_warn("crashkernel: invalid size\n");
+ return -EINVAL;
+ }
+
+ /* match ? */
+ if (system_ram >= start && system_ram < end) {
+ *crash_size = size;
+ break;
+ }
+ } while (*cur++ == ',');
+
+ if (*crash_size > 0) {
+ while (*cur && *cur != ' ' && *cur != '@')
+ cur++;
+ if (*cur == '@') {
+ cur++;
+ *crash_base = memparse(cur, &tmp);
+ if (cur == tmp) {
+ pr_warn("Memory value expected after '@'\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * That function parses "simple" (old) crashkernel command lines like
+ *
+ * crashkernel=size[@offset]
+ *
+ * It returns 0 on success and -EINVAL on failure.
+ */
+static int __init parse_crashkernel_simple(char *cmdline,
+ unsigned long long *crash_size,
+ unsigned long long *crash_base)
+{
+ char *cur = cmdline;
+
+ *crash_size = memparse(cmdline, &cur);
+ if (cmdline == cur) {
+ pr_warn("crashkernel: memory value expected\n");
+ return -EINVAL;
+ }
+
+ if (*cur == '@')
+ *crash_base = memparse(cur+1, &cur);
+ else if (*cur != ' ' && *cur != '\0') {
+ pr_warn("crashkernel: unrecognized char: %c\n", *cur);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+#define SUFFIX_HIGH 0
+#define SUFFIX_LOW 1
+#define SUFFIX_NULL 2
+static __initdata char *suffix_tbl[] = {
+ [SUFFIX_HIGH] = ",high",
+ [SUFFIX_LOW] = ",low",
+ [SUFFIX_NULL] = NULL,
+};
+
+/*
+ * That function parses "suffix" crashkernel command lines like
+ *
+ * crashkernel=size,[high|low]
+ *
+ * It returns 0 on success and -EINVAL on failure.
+ */
+static int __init parse_crashkernel_suffix(char *cmdline,
+ unsigned long long *crash_size,
+ const char *suffix)
+{
+ char *cur = cmdline;
+
+ *crash_size = memparse(cmdline, &cur);
+ if (cmdline == cur) {
+ pr_warn("crashkernel: memory value expected\n");
+ return -EINVAL;
+ }
+
+ /* check with suffix */
+ if (strncmp(cur, suffix, strlen(suffix))) {
+ pr_warn("crashkernel: unrecognized char: %c\n", *cur);
+ return -EINVAL;
+ }
+ cur += strlen(suffix);
+ if (*cur != ' ' && *cur != '\0') {
+ pr_warn("crashkernel: unrecognized char: %c\n", *cur);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static __init char *get_last_crashkernel(char *cmdline,
+ const char *name,
+ const char *suffix)
+{
+ char *p = cmdline, *ck_cmdline = NULL;
+
+ /* find crashkernel and use the last one if there are more */
+ p = strstr(p, name);
+ while (p) {
+ char *end_p = strchr(p, ' ');
+ char *q;
+
+ if (!end_p)
+ end_p = p + strlen(p);
+
+ if (!suffix) {
+ int i;
+
+ /* skip the one with any known suffix */
+ for (i = 0; suffix_tbl[i]; i++) {
+ q = end_p - strlen(suffix_tbl[i]);
+ if (!strncmp(q, suffix_tbl[i],
+ strlen(suffix_tbl[i])))
+ goto next;
+ }
+ ck_cmdline = p;
+ } else {
+ q = end_p - strlen(suffix);
+ if (!strncmp(q, suffix, strlen(suffix)))
+ ck_cmdline = p;
+ }
+next:
+ p = strstr(p+1, name);
+ }
+
+ if (!ck_cmdline)
+ return NULL;
+
+ return ck_cmdline;
+}
+
+static int __init __parse_crashkernel(char *cmdline,
+ unsigned long long system_ram,
+ unsigned long long *crash_size,
+ unsigned long long *crash_base,
+ const char *name,
+ const char *suffix)
+{
+ char *first_colon, *first_space;
+ char *ck_cmdline;
+
+ BUG_ON(!crash_size || !crash_base);
+ *crash_size = 0;
+ *crash_base = 0;
+
+ ck_cmdline = get_last_crashkernel(cmdline, name, suffix);
+
+ if (!ck_cmdline)
+ return -EINVAL;
+
+ ck_cmdline += strlen(name);
+
+ if (suffix)
+ return parse_crashkernel_suffix(ck_cmdline, crash_size,
+ suffix);
+ /*
+ * if the commandline contains a ':', then that's the extended
+ * syntax -- if not, it must be the classic syntax
+ */
+ first_colon = strchr(ck_cmdline, ':');
+ first_space = strchr(ck_cmdline, ' ');
+ if (first_colon && (!first_space || first_colon < first_space))
+ return parse_crashkernel_mem(ck_cmdline, system_ram,
+ crash_size, crash_base);
+
+ return parse_crashkernel_simple(ck_cmdline, crash_size, crash_base);
+}
+
+/*
+ * That function is the entry point for command line parsing and should be
+ * called from the arch-specific code.
+ */
+int __init parse_crashkernel(char *cmdline,
+ unsigned long long system_ram,
+ unsigned long long *crash_size,
+ unsigned long long *crash_base)
+{
+ return __parse_crashkernel(cmdline, system_ram, crash_size, crash_base,
+ "crashkernel=", NULL);
+}
+
+int __init parse_crashkernel_high(char *cmdline,
+ unsigned long long system_ram,
+ unsigned long long *crash_size,
+ unsigned long long *crash_base)
+{
+ return __parse_crashkernel(cmdline, system_ram, crash_size, crash_base,
+ "crashkernel=", suffix_tbl[SUFFIX_HIGH]);
+}
+
+int __init parse_crashkernel_low(char *cmdline,
+ unsigned long long system_ram,
+ unsigned long long *crash_size,
+ unsigned long long *crash_base)
+{
+ return __parse_crashkernel(cmdline, system_ram, crash_size, crash_base,
+ "crashkernel=", suffix_tbl[SUFFIX_LOW]);
+}
+
+Elf_Word *append_elf_note(Elf_Word *buf, char *name, unsigned int type,
+ void *data, size_t data_len)
+{
+ struct elf_note *note = (struct elf_note *)buf;
+
+ note->n_namesz = strlen(name) + 1;
+ note->n_descsz = data_len;
+ note->n_type = type;
+ buf += DIV_ROUND_UP(sizeof(*note), sizeof(Elf_Word));
+ memcpy(buf, name, note->n_namesz);
+ buf += DIV_ROUND_UP(note->n_namesz, sizeof(Elf_Word));
+ memcpy(buf, data, data_len);
+ buf += DIV_ROUND_UP(data_len, sizeof(Elf_Word));
+
+ return buf;
+}
+
+void final_note(Elf_Word *buf)
+{
+ memset(buf, 0, sizeof(struct elf_note));
+}
+
+static void update_vmcoreinfo_note(void)
+{
+ u32 *buf = vmcoreinfo_note;
+
+ if (!vmcoreinfo_size)
+ return;
+ buf = append_elf_note(buf, VMCOREINFO_NOTE_NAME, 0, vmcoreinfo_data,
+ vmcoreinfo_size);
+ final_note(buf);
+}
+
+void crash_save_vmcoreinfo(void)
+{
+ vmcoreinfo_append_str("CRASHTIME=%ld\n", get_seconds());
+ update_vmcoreinfo_note();
+}
+
+void vmcoreinfo_append_str(const char *fmt, ...)
+{
+ va_list args;
+ char buf[0x50];
+ size_t r;
+
+ va_start(args, fmt);
+ r = vscnprintf(buf, sizeof(buf), fmt, args);
+ va_end(args);
+
+ r = min(r, vmcoreinfo_max_size - vmcoreinfo_size);
+
+ memcpy(&vmcoreinfo_data[vmcoreinfo_size], buf, r);
+
+ vmcoreinfo_size += r;
+}
+
+/*
+ * provide an empty default implementation here -- architecture
+ * code may override this
+ */
+void __weak arch_crash_save_vmcoreinfo(void)
+{}
+
+phys_addr_t __weak paddr_vmcoreinfo_note(void)
+{
+ return __pa_symbol((unsigned long)(char *)&vmcoreinfo_note);
+}
+
+static int __init crash_save_vmcoreinfo_init(void)
+{
+ VMCOREINFO_OSRELEASE(init_uts_ns.name.release);
+ VMCOREINFO_PAGESIZE(PAGE_SIZE);
+
+ VMCOREINFO_SYMBOL(init_uts_ns);
+ VMCOREINFO_SYMBOL(node_online_map);
+#ifdef CONFIG_MMU
+ VMCOREINFO_SYMBOL(swapper_pg_dir);
+#endif
+ VMCOREINFO_SYMBOL(_stext);
+ VMCOREINFO_SYMBOL(vmap_area_list);
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+ VMCOREINFO_SYMBOL(mem_map);
+ VMCOREINFO_SYMBOL(contig_page_data);
+#endif
+#ifdef CONFIG_SPARSEMEM
+ VMCOREINFO_SYMBOL(mem_section);
+ VMCOREINFO_LENGTH(mem_section, NR_SECTION_ROOTS);
+ VMCOREINFO_STRUCT_SIZE(mem_section);
+ VMCOREINFO_OFFSET(mem_section, section_mem_map);
+#endif
+ VMCOREINFO_STRUCT_SIZE(page);
+ VMCOREINFO_STRUCT_SIZE(pglist_data);
+ VMCOREINFO_STRUCT_SIZE(zone);
+ VMCOREINFO_STRUCT_SIZE(free_area);
+ VMCOREINFO_STRUCT_SIZE(list_head);
+ VMCOREINFO_SIZE(nodemask_t);
+ VMCOREINFO_OFFSET(page, flags);
+ VMCOREINFO_OFFSET(page, _refcount);
+ VMCOREINFO_OFFSET(page, mapping);
+ VMCOREINFO_OFFSET(page, lru);
+ VMCOREINFO_OFFSET(page, _mapcount);
+ VMCOREINFO_OFFSET(page, private);
+ VMCOREINFO_OFFSET(page, compound_dtor);
+ VMCOREINFO_OFFSET(page, compound_order);
+ VMCOREINFO_OFFSET(page, compound_head);
+ VMCOREINFO_OFFSET(pglist_data, node_zones);
+ VMCOREINFO_OFFSET(pglist_data, nr_zones);
+#ifdef CONFIG_FLAT_NODE_MEM_MAP
+ VMCOREINFO_OFFSET(pglist_data, node_mem_map);
+#endif
+ VMCOREINFO_OFFSET(pglist_data, node_start_pfn);
+ VMCOREINFO_OFFSET(pglist_data, node_spanned_pages);
+ VMCOREINFO_OFFSET(pglist_data, node_id);
+ VMCOREINFO_OFFSET(zone, free_area);
+ VMCOREINFO_OFFSET(zone, vm_stat);
+ VMCOREINFO_OFFSET(zone, spanned_pages);
+ VMCOREINFO_OFFSET(free_area, free_list);
+ VMCOREINFO_OFFSET(list_head, next);
+ VMCOREINFO_OFFSET(list_head, prev);
+ VMCOREINFO_OFFSET(vmap_area, va_start);
+ VMCOREINFO_OFFSET(vmap_area, list);
+ VMCOREINFO_LENGTH(zone.free_area, MAX_ORDER);
+ log_buf_vmcoreinfo_setup();
+ VMCOREINFO_LENGTH(free_area.free_list, MIGRATE_TYPES);
+ VMCOREINFO_NUMBER(NR_FREE_PAGES);
+ VMCOREINFO_NUMBER(PG_lru);
+ VMCOREINFO_NUMBER(PG_private);
+ VMCOREINFO_NUMBER(PG_swapcache);
+ VMCOREINFO_NUMBER(PG_slab);
+#ifdef CONFIG_MEMORY_FAILURE
+ VMCOREINFO_NUMBER(PG_hwpoison);
+#endif
+ VMCOREINFO_NUMBER(PG_head_mask);
+ VMCOREINFO_NUMBER(PAGE_BUDDY_MAPCOUNT_VALUE);
+#ifdef CONFIG_HUGETLB_PAGE
+ VMCOREINFO_NUMBER(HUGETLB_PAGE_DTOR);
+#endif
+
+ arch_crash_save_vmcoreinfo();
+ update_vmcoreinfo_note();
+
+ return 0;
+}
+
+subsys_initcall(crash_save_vmcoreinfo_init);
diff --git a/kernel/fork.c b/kernel/fork.c
index dd5a371..08ba696 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -179,6 +179,24 @@ void __weak arch_release_thread_stack(unsigned long *stack)
*/
#define NR_CACHED_STACKS 2
static DEFINE_PER_CPU(struct vm_struct *, cached_stacks[NR_CACHED_STACKS]);
+
+static int free_vm_stack_cache(unsigned int cpu)
+{
+ struct vm_struct **cached_vm_stacks = per_cpu_ptr(cached_stacks, cpu);
+ int i;
+
+ for (i = 0; i < NR_CACHED_STACKS; i++) {
+ struct vm_struct *vm_stack = cached_vm_stacks[i];
+
+ if (!vm_stack)
+ continue;
+
+ vfree(vm_stack->addr);
+ cached_vm_stacks[i] = NULL;
+ }
+
+ return 0;
+}
#endif
static unsigned long *alloc_thread_stack_node(struct task_struct *tsk, int node)
@@ -203,7 +221,7 @@ static unsigned long *alloc_thread_stack_node(struct task_struct *tsk, int node)
stack = __vmalloc_node_range(THREAD_SIZE, THREAD_SIZE,
VMALLOC_START, VMALLOC_END,
- THREADINFO_GFP | __GFP_HIGHMEM,
+ THREADINFO_GFP,
PAGE_KERNEL,
0, node, __builtin_return_address(0));
@@ -467,6 +485,11 @@ void __init fork_init(void)
for (i = 0; i < UCOUNT_COUNTS; i++) {
init_user_ns.ucount_max[i] = max_threads/2;
}
+
+#ifdef CONFIG_VMAP_STACK
+ cpuhp_setup_state(CPUHP_BP_PREPARE_DYN, "fork:vm_stack_cache",
+ NULL, free_vm_stack_cache);
+#endif
}
int __weak arch_dup_task_struct(struct task_struct *dst,
diff --git a/kernel/groups.c b/kernel/groups.c
index 8dd7a61..d097276 100644
--- a/kernel/groups.c
+++ b/kernel/groups.c
@@ -18,7 +18,7 @@ struct group_info *groups_alloc(int gidsetsize)
len = sizeof(struct group_info) + sizeof(kgid_t) * gidsetsize;
gi = kmalloc(len, GFP_KERNEL_ACCOUNT|__GFP_NOWARN|__GFP_NORETRY);
if (!gi)
- gi = __vmalloc(len, GFP_KERNEL_ACCOUNT|__GFP_HIGHMEM, PAGE_KERNEL);
+ gi = __vmalloc(len, GFP_KERNEL_ACCOUNT, PAGE_KERNEL);
if (!gi)
return NULL;
diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index f0f8e2a..751593e 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -43,6 +43,7 @@ unsigned long __read_mostly sysctl_hung_task_timeout_secs = CONFIG_DEFAULT_HUNG_
int __read_mostly sysctl_hung_task_warnings = 10;
static int __read_mostly did_panic;
+static bool hung_task_show_lock;
static struct task_struct *watchdog_task;
@@ -120,12 +121,14 @@ static void check_hung_task(struct task_struct *t, unsigned long timeout)
pr_err("\"echo 0 > /proc/sys/kernel/hung_task_timeout_secs\""
" disables this message.\n");
sched_show_task(t);
- debug_show_all_locks();
+ hung_task_show_lock = true;
}
touch_nmi_watchdog();
if (sysctl_hung_task_panic) {
+ if (hung_task_show_lock)
+ debug_show_all_locks();
trigger_all_cpu_backtrace();
panic("hung_task: blocked tasks");
}
@@ -172,6 +175,7 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout)
if (test_taint(TAINT_DIE) || did_panic)
return;
+ hung_task_show_lock = false;
rcu_read_lock();
for_each_process_thread(g, t) {
if (!max_count--)
@@ -187,6 +191,8 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout)
}
unlock:
rcu_read_unlock();
+ if (hung_task_show_lock)
+ debug_show_all_locks();
}
static long hung_timeout_jiffies(unsigned long last_checked,
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index ae1c90f..070be98 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1559,7 +1559,7 @@ void remove_irq(unsigned int irq, struct irqaction *act)
struct irq_desc *desc = irq_to_desc(irq);
if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
- __free_irq(irq, act->dev_id);
+ __free_irq(irq, act->dev_id);
}
EXPORT_SYMBOL_GPL(remove_irq);
@@ -1576,20 +1576,27 @@ EXPORT_SYMBOL_GPL(remove_irq);
* have completed.
*
* This function must not be called from interrupt context.
+ *
+ * Returns the devname argument passed to request_irq.
*/
-void free_irq(unsigned int irq, void *dev_id)
+const void *free_irq(unsigned int irq, void *dev_id)
{
struct irq_desc *desc = irq_to_desc(irq);
+ struct irqaction *action;
+ const char *devname;
if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
- return;
+ return NULL;
#ifdef CONFIG_SMP
if (WARN_ON(desc->affinity_notify))
desc->affinity_notify = NULL;
#endif
- kfree(__free_irq(irq, dev_id));
+ action = __free_irq(irq, dev_id);
+ devname = action->name;
+ kfree(action);
+ return devname;
}
EXPORT_SYMBOL(free_irq);
diff --git a/kernel/kcov.c b/kernel/kcov.c
index 85e5546..cd77199 100644
--- a/kernel/kcov.c
+++ b/kernel/kcov.c
@@ -60,15 +60,8 @@ void notrace __sanitizer_cov_trace_pc(void)
/*
* We are interested in code coverage as a function of a syscall inputs,
* so we ignore code executed in interrupts.
- * The checks for whether we are in an interrupt are open-coded, because
- * 1. We can't use in_interrupt() here, since it also returns true
- * when we are inside local_bh_disable() section.
- * 2. We don't want to use (in_irq() | in_serving_softirq() | in_nmi()),
- * since that leads to slower generated code (three separate tests,
- * one for each of the flags).
*/
- if (!t || (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_OFFSET
- | NMI_MASK)))
+ if (!t || !in_task())
return;
mode = READ_ONCE(t->kcov_mode);
if (mode == KCOV_MODE_TRACE) {
diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
index bfe62d5..ae1a3ba 100644
--- a/kernel/kexec_core.c
+++ b/kernel/kexec_core.c
@@ -51,12 +51,6 @@ DEFINE_MUTEX(kexec_mutex);
/* Per cpu memory for storing cpu states in case of system crash. */
note_buf_t __percpu *crash_notes;
-/* vmcoreinfo stuff */
-static unsigned char vmcoreinfo_data[VMCOREINFO_BYTES];
-u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
-size_t vmcoreinfo_size;
-size_t vmcoreinfo_max_size = sizeof(vmcoreinfo_data);
-
/* Flag to indicate we are going to kexec a new kernel */
bool kexec_in_progress = false;
@@ -996,34 +990,6 @@ int crash_shrink_memory(unsigned long new_size)
return ret;
}
-static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
- size_t data_len)
-{
- struct elf_note note;
-
- note.n_namesz = strlen(name) + 1;
- note.n_descsz = data_len;
- note.n_type = type;
- memcpy(buf, ¬e, sizeof(note));
- buf += (sizeof(note) + 3)/4;
- memcpy(buf, name, note.n_namesz);
- buf += (note.n_namesz + 3)/4;
- memcpy(buf, data, note.n_descsz);
- buf += (note.n_descsz + 3)/4;
-
- return buf;
-}
-
-static void final_note(u32 *buf)
-{
- struct elf_note note;
-
- note.n_namesz = 0;
- note.n_descsz = 0;
- note.n_type = 0;
- memcpy(buf, ¬e, sizeof(note));
-}
-
void crash_save_cpu(struct pt_regs *regs, int cpu)
{
struct elf_prstatus prstatus;
@@ -1085,403 +1051,6 @@ subsys_initcall(crash_notes_memory_init);
/*
- * parsing the "crashkernel" commandline
- *
- * this code is intended to be called from architecture specific code
- */
-
-
-/*
- * This function parses command lines in the format
- *
- * crashkernel=ramsize-range:size[,...][@offset]
- *
- * The function returns 0 on success and -EINVAL on failure.
- */
-static int __init parse_crashkernel_mem(char *cmdline,
- unsigned long long system_ram,
- unsigned long long *crash_size,
- unsigned long long *crash_base)
-{
- char *cur = cmdline, *tmp;
-
- /* for each entry of the comma-separated list */
- do {
- unsigned long long start, end = ULLONG_MAX, size;
-
- /* get the start of the range */
- start = memparse(cur, &tmp);
- if (cur == tmp) {
- pr_warn("crashkernel: Memory value expected\n");
- return -EINVAL;
- }
- cur = tmp;
- if (*cur != '-') {
- pr_warn("crashkernel: '-' expected\n");
- return -EINVAL;
- }
- cur++;
-
- /* if no ':' is here, than we read the end */
- if (*cur != ':') {
- end = memparse(cur, &tmp);
- if (cur == tmp) {
- pr_warn("crashkernel: Memory value expected\n");
- return -EINVAL;
- }
- cur = tmp;
- if (end <= start) {
- pr_warn("crashkernel: end <= start\n");
- return -EINVAL;
- }
- }
-
- if (*cur != ':') {
- pr_warn("crashkernel: ':' expected\n");
- return -EINVAL;
- }
- cur++;
-
- size = memparse(cur, &tmp);
- if (cur == tmp) {
- pr_warn("Memory value expected\n");
- return -EINVAL;
- }
- cur = tmp;
- if (size >= system_ram) {
- pr_warn("crashkernel: invalid size\n");
- return -EINVAL;
- }
-
- /* match ? */
- if (system_ram >= start && system_ram < end) {
- *crash_size = size;
- break;
- }
- } while (*cur++ == ',');
-
- if (*crash_size > 0) {
- while (*cur && *cur != ' ' && *cur != '@')
- cur++;
- if (*cur == '@') {
- cur++;
- *crash_base = memparse(cur, &tmp);
- if (cur == tmp) {
- pr_warn("Memory value expected after '@'\n");
- return -EINVAL;
- }
- }
- }
-
- return 0;
-}
-
-/*
- * That function parses "simple" (old) crashkernel command lines like
- *
- * crashkernel=size[@offset]
- *
- * It returns 0 on success and -EINVAL on failure.
- */
-static int __init parse_crashkernel_simple(char *cmdline,
- unsigned long long *crash_size,
- unsigned long long *crash_base)
-{
- char *cur = cmdline;
-
- *crash_size = memparse(cmdline, &cur);
- if (cmdline == cur) {
- pr_warn("crashkernel: memory value expected\n");
- return -EINVAL;
- }
-
- if (*cur == '@')
- *crash_base = memparse(cur+1, &cur);
- else if (*cur != ' ' && *cur != '\0') {
- pr_warn("crashkernel: unrecognized char: %c\n", *cur);
- return -EINVAL;
- }
-
- return 0;
-}
-
-#define SUFFIX_HIGH 0
-#define SUFFIX_LOW 1
-#define SUFFIX_NULL 2
-static __initdata char *suffix_tbl[] = {
- [SUFFIX_HIGH] = ",high",
- [SUFFIX_LOW] = ",low",
- [SUFFIX_NULL] = NULL,
-};
-
-/*
- * That function parses "suffix" crashkernel command lines like
- *
- * crashkernel=size,[high|low]
- *
- * It returns 0 on success and -EINVAL on failure.
- */
-static int __init parse_crashkernel_suffix(char *cmdline,
- unsigned long long *crash_size,
- const char *suffix)
-{
- char *cur = cmdline;
-
- *crash_size = memparse(cmdline, &cur);
- if (cmdline == cur) {
- pr_warn("crashkernel: memory value expected\n");
- return -EINVAL;
- }
-
- /* check with suffix */
- if (strncmp(cur, suffix, strlen(suffix))) {
- pr_warn("crashkernel: unrecognized char: %c\n", *cur);
- return -EINVAL;
- }
- cur += strlen(suffix);
- if (*cur != ' ' && *cur != '\0') {
- pr_warn("crashkernel: unrecognized char: %c\n", *cur);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static __init char *get_last_crashkernel(char *cmdline,
- const char *name,
- const char *suffix)
-{
- char *p = cmdline, *ck_cmdline = NULL;
-
- /* find crashkernel and use the last one if there are more */
- p = strstr(p, name);
- while (p) {
- char *end_p = strchr(p, ' ');
- char *q;
-
- if (!end_p)
- end_p = p + strlen(p);
-
- if (!suffix) {
- int i;
-
- /* skip the one with any known suffix */
- for (i = 0; suffix_tbl[i]; i++) {
- q = end_p - strlen(suffix_tbl[i]);
- if (!strncmp(q, suffix_tbl[i],
- strlen(suffix_tbl[i])))
- goto next;
- }
- ck_cmdline = p;
- } else {
- q = end_p - strlen(suffix);
- if (!strncmp(q, suffix, strlen(suffix)))
- ck_cmdline = p;
- }
-next:
- p = strstr(p+1, name);
- }
-
- if (!ck_cmdline)
- return NULL;
-
- return ck_cmdline;
-}
-
-static int __init __parse_crashkernel(char *cmdline,
- unsigned long long system_ram,
- unsigned long long *crash_size,
- unsigned long long *crash_base,
- const char *name,
- const char *suffix)
-{
- char *first_colon, *first_space;
- char *ck_cmdline;
-
- BUG_ON(!crash_size || !crash_base);
- *crash_size = 0;
- *crash_base = 0;
-
- ck_cmdline = get_last_crashkernel(cmdline, name, suffix);
-
- if (!ck_cmdline)
- return -EINVAL;
-
- ck_cmdline += strlen(name);
-
- if (suffix)
- return parse_crashkernel_suffix(ck_cmdline, crash_size,
- suffix);
- /*
- * if the commandline contains a ':', then that's the extended
- * syntax -- if not, it must be the classic syntax
- */
- first_colon = strchr(ck_cmdline, ':');
- first_space = strchr(ck_cmdline, ' ');
- if (first_colon && (!first_space || first_colon < first_space))
- return parse_crashkernel_mem(ck_cmdline, system_ram,
- crash_size, crash_base);
-
- return parse_crashkernel_simple(ck_cmdline, crash_size, crash_base);
-}
-
-/*
- * That function is the entry point for command line parsing and should be
- * called from the arch-specific code.
- */
-int __init parse_crashkernel(char *cmdline,
- unsigned long long system_ram,
- unsigned long long *crash_size,
- unsigned long long *crash_base)
-{
- return __parse_crashkernel(cmdline, system_ram, crash_size, crash_base,
- "crashkernel=", NULL);
-}
-
-int __init parse_crashkernel_high(char *cmdline,
- unsigned long long system_ram,
- unsigned long long *crash_size,
- unsigned long long *crash_base)
-{
- return __parse_crashkernel(cmdline, system_ram, crash_size, crash_base,
- "crashkernel=", suffix_tbl[SUFFIX_HIGH]);
-}
-
-int __init parse_crashkernel_low(char *cmdline,
- unsigned long long system_ram,
- unsigned long long *crash_size,
- unsigned long long *crash_base)
-{
- return __parse_crashkernel(cmdline, system_ram, crash_size, crash_base,
- "crashkernel=", suffix_tbl[SUFFIX_LOW]);
-}
-
-static void update_vmcoreinfo_note(void)
-{
- u32 *buf = vmcoreinfo_note;
-
- if (!vmcoreinfo_size)
- return;
- buf = append_elf_note(buf, VMCOREINFO_NOTE_NAME, 0, vmcoreinfo_data,
- vmcoreinfo_size);
- final_note(buf);
-}
-
-void crash_save_vmcoreinfo(void)
-{
- vmcoreinfo_append_str("CRASHTIME=%ld\n", get_seconds());
- update_vmcoreinfo_note();
-}
-
-void vmcoreinfo_append_str(const char *fmt, ...)
-{
- va_list args;
- char buf[0x50];
- size_t r;
-
- va_start(args, fmt);
- r = vscnprintf(buf, sizeof(buf), fmt, args);
- va_end(args);
-
- r = min(r, vmcoreinfo_max_size - vmcoreinfo_size);
-
- memcpy(&vmcoreinfo_data[vmcoreinfo_size], buf, r);
-
- vmcoreinfo_size += r;
-}
-
-/*
- * provide an empty default implementation here -- architecture
- * code may override this
- */
-void __weak arch_crash_save_vmcoreinfo(void)
-{}
-
-phys_addr_t __weak paddr_vmcoreinfo_note(void)
-{
- return __pa_symbol((unsigned long)(char *)&vmcoreinfo_note);
-}
-
-static int __init crash_save_vmcoreinfo_init(void)
-{
- VMCOREINFO_OSRELEASE(init_uts_ns.name.release);
- VMCOREINFO_PAGESIZE(PAGE_SIZE);
-
- VMCOREINFO_SYMBOL(init_uts_ns);
- VMCOREINFO_SYMBOL(node_online_map);
-#ifdef CONFIG_MMU
- VMCOREINFO_SYMBOL(swapper_pg_dir);
-#endif
- VMCOREINFO_SYMBOL(_stext);
- VMCOREINFO_SYMBOL(vmap_area_list);
-
-#ifndef CONFIG_NEED_MULTIPLE_NODES
- VMCOREINFO_SYMBOL(mem_map);
- VMCOREINFO_SYMBOL(contig_page_data);
-#endif
-#ifdef CONFIG_SPARSEMEM
- VMCOREINFO_SYMBOL(mem_section);
- VMCOREINFO_LENGTH(mem_section, NR_SECTION_ROOTS);
- VMCOREINFO_STRUCT_SIZE(mem_section);
- VMCOREINFO_OFFSET(mem_section, section_mem_map);
-#endif
- VMCOREINFO_STRUCT_SIZE(page);
- VMCOREINFO_STRUCT_SIZE(pglist_data);
- VMCOREINFO_STRUCT_SIZE(zone);
- VMCOREINFO_STRUCT_SIZE(free_area);
- VMCOREINFO_STRUCT_SIZE(list_head);
- VMCOREINFO_SIZE(nodemask_t);
- VMCOREINFO_OFFSET(page, flags);
- VMCOREINFO_OFFSET(page, _refcount);
- VMCOREINFO_OFFSET(page, mapping);
- VMCOREINFO_OFFSET(page, lru);
- VMCOREINFO_OFFSET(page, _mapcount);
- VMCOREINFO_OFFSET(page, private);
- VMCOREINFO_OFFSET(page, compound_dtor);
- VMCOREINFO_OFFSET(page, compound_order);
- VMCOREINFO_OFFSET(page, compound_head);
- VMCOREINFO_OFFSET(pglist_data, node_zones);
- VMCOREINFO_OFFSET(pglist_data, nr_zones);
-#ifdef CONFIG_FLAT_NODE_MEM_MAP
- VMCOREINFO_OFFSET(pglist_data, node_mem_map);
-#endif
- VMCOREINFO_OFFSET(pglist_data, node_start_pfn);
- VMCOREINFO_OFFSET(pglist_data, node_spanned_pages);
- VMCOREINFO_OFFSET(pglist_data, node_id);
- VMCOREINFO_OFFSET(zone, free_area);
- VMCOREINFO_OFFSET(zone, vm_stat);
- VMCOREINFO_OFFSET(zone, spanned_pages);
- VMCOREINFO_OFFSET(free_area, free_list);
- VMCOREINFO_OFFSET(list_head, next);
- VMCOREINFO_OFFSET(list_head, prev);
- VMCOREINFO_OFFSET(vmap_area, va_start);
- VMCOREINFO_OFFSET(vmap_area, list);
- VMCOREINFO_LENGTH(zone.free_area, MAX_ORDER);
- log_buf_kexec_setup();
- VMCOREINFO_LENGTH(free_area.free_list, MIGRATE_TYPES);
- VMCOREINFO_NUMBER(NR_FREE_PAGES);
- VMCOREINFO_NUMBER(PG_lru);
- VMCOREINFO_NUMBER(PG_private);
- VMCOREINFO_NUMBER(PG_swapcache);
- VMCOREINFO_NUMBER(PG_slab);
-#ifdef CONFIG_MEMORY_FAILURE
- VMCOREINFO_NUMBER(PG_hwpoison);
-#endif
- VMCOREINFO_NUMBER(PG_head_mask);
- VMCOREINFO_NUMBER(PAGE_BUDDY_MAPCOUNT_VALUE);
-#ifdef CONFIG_HUGETLB_PAGE
- VMCOREINFO_NUMBER(HUGETLB_PAGE_DTOR);
-#endif
-
- arch_crash_save_vmcoreinfo();
- update_vmcoreinfo_note();
-
- return 0;
-}
-
-subsys_initcall(crash_save_vmcoreinfo_init);
-
-/*
* Move into place and start executing a preloaded standalone
* executable. If nothing was preloaded return an error.
*/
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index 0999679..23cd706 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -125,6 +125,10 @@ static ssize_t kexec_crash_size_store(struct kobject *kobj,
}
KERNEL_ATTR_RW(kexec_crash_size);
+#endif /* CONFIG_KEXEC_CORE */
+
+#ifdef CONFIG_CRASH_CORE
+
static ssize_t vmcoreinfo_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
@@ -134,7 +138,7 @@ static ssize_t vmcoreinfo_show(struct kobject *kobj,
}
KERNEL_ATTR_RO(vmcoreinfo);
-#endif /* CONFIG_KEXEC_CORE */
+#endif /* CONFIG_CRASH_CORE */
/* whether file capabilities are enabled */
static ssize_t fscaps_show(struct kobject *kobj,
@@ -219,6 +223,8 @@ static struct attribute * kernel_attrs[] = {
&kexec_loaded_attr.attr,
&kexec_crash_loaded_attr.attr,
&kexec_crash_size_attr.attr,
+#endif
+#ifdef CONFIG_CRASH_CORE
&vmcoreinfo_attr.attr,
#endif
#ifndef CONFIG_TINY_RCU
diff --git a/kernel/module.c b/kernel/module.c
index f37308b..4a3665f 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -49,6 +49,9 @@
#include <linux/rculist.h>
#include <linux/uaccess.h>
#include <asm/cacheflush.h>
+#ifdef CONFIG_STRICT_MODULE_RWX
+#include <asm/set_memory.h>
+#endif
#include <asm/mmu_context.h>
#include <linux/license.h>
#include <asm/sections.h>
@@ -2864,7 +2867,7 @@ static int copy_module_from_user(const void __user *umod, unsigned long len,
/* Suck in entire file: we'll want most of it. */
info->hdr = __vmalloc(info->len,
- GFP_KERNEL | __GFP_HIGHMEM | __GFP_NOWARN, PAGE_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN, PAGE_KERNEL);
if (!info->hdr)
return -ENOMEM;
diff --git a/kernel/pid.c b/kernel/pid.c
index 0143ac0..fd1cde1 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -321,8 +321,10 @@ struct pid *alloc_pid(struct pid_namespace *ns)
}
if (unlikely(is_child_reaper(pid))) {
- if (pid_ns_prepare_proc(ns))
+ if (pid_ns_prepare_proc(ns)) {
+ disable_pid_allocation(ns);
goto out_free;
+ }
}
get_pid_ns(ns);
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index de461aa..d1f3e9f 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -374,6 +374,29 @@ static struct ns_common *pidns_get(struct task_struct *task)
return ns ? &ns->ns : NULL;
}
+static struct ns_common *pidns_for_children_get(struct task_struct *task)
+{
+ struct pid_namespace *ns = NULL;
+
+ task_lock(task);
+ if (task->nsproxy) {
+ ns = task->nsproxy->pid_ns_for_children;
+ get_pid_ns(ns);
+ }
+ task_unlock(task);
+
+ if (ns) {
+ read_lock(&tasklist_lock);
+ if (!ns->child_reaper) {
+ put_pid_ns(ns);
+ ns = NULL;
+ }
+ read_unlock(&tasklist_lock);
+ }
+
+ return ns ? &ns->ns : NULL;
+}
+
static void pidns_put(struct ns_common *ns)
{
put_pid_ns(to_pid_ns(ns));
@@ -443,6 +466,17 @@ const struct proc_ns_operations pidns_operations = {
.get_parent = pidns_get_parent,
};
+const struct proc_ns_operations pidns_for_children_operations = {
+ .name = "pid_for_children",
+ .real_ns_name = "pid",
+ .type = CLONE_NEWPID,
+ .get = pidns_for_children_get,
+ .put = pidns_put,
+ .install = pidns_install,
+ .owner = pidns_owner,
+ .get_parent = pidns_get_parent,
+};
+
static __init int pid_namespaces_init(void)
{
pid_ns_cachep = KMEM_CACHE(pid_namespace, SLAB_PANIC);
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index d79a38d..3b1e0f3 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -36,6 +36,9 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
+#ifdef CONFIG_STRICT_KERNEL_RWX
+#include <asm/set_memory.h>
+#endif
#include "power.h"
diff --git a/kernel/printk/braille.c b/kernel/printk/braille.c
index d5760c4..61d41ca 100644
--- a/kernel/printk/braille.c
+++ b/kernel/printk/braille.c
@@ -2,12 +2,13 @@
#include <linux/kernel.h>
#include <linux/console.h>
+#include <linux/errno.h>
#include <linux/string.h>
#include "console_cmdline.h"
#include "braille.h"
-char *_braille_console_setup(char **str, char **brl_options)
+int _braille_console_setup(char **str, char **brl_options)
{
if (!strncmp(*str, "brl,", 4)) {
*brl_options = "";
@@ -15,14 +16,14 @@ char *_braille_console_setup(char **str, char **brl_options)
} else if (!strncmp(*str, "brl=", 4)) {
*brl_options = *str + 4;
*str = strchr(*brl_options, ',');
- if (!*str)
+ if (!*str) {
pr_err("need port name after brl=\n");
- else
- *((*str)++) = 0;
- } else
- return NULL;
+ return -EINVAL;
+ }
+ *((*str)++) = 0;
+ }
- return *str;
+ return 0;
}
int
diff --git a/kernel/printk/braille.h b/kernel/printk/braille.h
index 769d771..749a675 100644
--- a/kernel/printk/braille.h
+++ b/kernel/printk/braille.h
@@ -9,7 +9,14 @@ braille_set_options(struct console_cmdline *c, char *brl_options)
c->brl_options = brl_options;
}
-char *
+/*
+ * Setup console according to braille options.
+ * Return -EINVAL on syntax error, 0 on success (or no braille option was
+ * actually given).
+ * Modifies str to point to the serial options
+ * Sets brl_options to the parsed braille options.
+ */
+int
_braille_console_setup(char **str, char **brl_options);
int
@@ -25,10 +32,10 @@ braille_set_options(struct console_cmdline *c, char *brl_options)
{
}
-static inline char *
+static inline int
_braille_console_setup(char **str, char **brl_options)
{
- return NULL;
+ return 0;
}
static inline int
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 779479a..a1aecf4 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -32,7 +32,7 @@
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/syscalls.h>
-#include <linux/kexec.h>
+#include <linux/crash_core.h>
#include <linux/kdb.h>
#include <linux/ratelimit.h>
#include <linux/kmsg_dump.h>
@@ -1002,7 +1002,7 @@ const struct file_operations kmsg_fops = {
.release = devkmsg_release,
};
-#ifdef CONFIG_KEXEC_CORE
+#ifdef CONFIG_CRASH_CORE
/*
* This appends the listed symbols to /proc/vmcore
*
@@ -1011,7 +1011,7 @@ const struct file_operations kmsg_fops = {
* symbols are specifically used so that utilities can access and extract the
* dmesg log from a vmcore file after a crash.
*/
-void log_buf_kexec_setup(void)
+void log_buf_vmcoreinfo_setup(void)
{
VMCOREINFO_SYMBOL(log_buf);
VMCOREINFO_SYMBOL(log_buf_len);
@@ -2642,6 +2642,30 @@ int unregister_console(struct console *console)
EXPORT_SYMBOL(unregister_console);
/*
+ * Initialize the console device. This is called *early*, so
+ * we can't necessarily depend on lots of kernel help here.
+ * Just do some early initializations, and do the complex setup
+ * later.
+ */
+void __init console_init(void)
+{
+ initcall_t *call;
+
+ /* Setup the default TTY line discipline. */
+ n_tty_init();
+
+ /*
+ * set up the console device so that later boot sequences can
+ * inform about problems etc..
+ */
+ call = __con_initcall_start;
+ while (call < __con_initcall_end) {
+ (*call)();
+ call++;
+ }
+}
+
+/*
* Some boot consoles access data that is in the init section and which will
* be discarded after the initcalls have been run. To make sure that no code
* will access this data, unregister the boot consoles in a late initcall.
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 21343d1..4dfba1a 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2576,7 +2576,7 @@ static int do_proc_dointvec_jiffies_conv(bool *negp, unsigned long *lvalp,
int write, void *data)
{
if (write) {
- if (*lvalp > LONG_MAX / HZ)
+ if (*lvalp > INT_MAX / HZ)
return 1;
*valp = *negp ? -(*lvalp*HZ) : (*lvalp*HZ);
} else {
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index 8a5e442..4559e91 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -30,6 +30,7 @@
#include <linux/pid_namespace.h>
#include <net/genetlink.h>
#include <linux/atomic.h>
+#include <linux/sched/cputime.h>
/*
* Maximum length of a cpumask that can be specified in
@@ -210,6 +211,8 @@ static int fill_stats_for_tgid(pid_t tgid, struct taskstats *stats)
struct task_struct *tsk, *first;
unsigned long flags;
int rc = -ESRCH;
+ u64 delta, utime, stime;
+ u64 start_time;
/*
* Add additional stats from live tasks except zombie thread group
@@ -227,6 +230,7 @@ static int fill_stats_for_tgid(pid_t tgid, struct taskstats *stats)
memset(stats, 0, sizeof(*stats));
tsk = first;
+ start_time = ktime_get_ns();
do {
if (tsk->exit_state)
continue;
@@ -238,6 +242,16 @@ static int fill_stats_for_tgid(pid_t tgid, struct taskstats *stats)
*/
delayacct_add_tsk(stats, tsk);
+ /* calculate task elapsed time in nsec */
+ delta = start_time - tsk->start_time;
+ /* Convert to micro seconds */
+ do_div(delta, NSEC_PER_USEC);
+ stats->ac_etime += delta;
+
+ task_cputime(tsk, &utime, &stime);
+ stats->ac_utime += div_u64(utime, NSEC_PER_USEC);
+ stats->ac_stime += div_u64(stime, NSEC_PER_USEC);
+
stats->nvcsw += tsk->nvcsw;
stats->nivcsw += tsk->nivcsw;
} while_each_thread(first, tsk);
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 00077a5..39dca4e 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3631,22 +3631,20 @@ ftrace_match_record(struct dyn_ftrace *rec, struct ftrace_glob *func_g,
/* blank module name to match all modules */
if (!mod_g->len) {
/* blank module globbing: modname xor exclude_mod */
- if ((!exclude_mod) != (!modname))
+ if (!exclude_mod != !modname)
goto func_match;
return 0;
}
- /* not matching the module */
- if (!modname || !mod_matches) {
- if (exclude_mod)
- goto func_match;
- else
- return 0;
- }
-
- if (mod_matches && exclude_mod)
+ /*
+ * exclude_mod is set to trace everything but the given
+ * module. If it is set and the module matches, then
+ * return 0. If it is not set, and the module doesn't match
+ * also return 0. Otherwise, check the function to see if
+ * that matches.
+ */
+ if (!mod_matches == !exclude_mod)
return 0;
-
func_match:
/* blank search means to match all funcs in the mod */
if (!func_g->len)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 80eda7d..4ad4420 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1976,7 +1976,7 @@ static void __trace_find_cmdline(int pid, char comm[])
map = savedcmd->map_pid_to_cmdline[pid];
if (map != NO_CMDLINE_MAP)
- strcpy(comm, get_saved_cmdlines(map));
+ strlcpy(comm, get_saved_cmdlines(map), TASK_COMM_LEN);
else
strcpy(comm, "<...>");
}
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index c203ac4..adcdbbe 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -348,14 +348,14 @@ FTRACE_ENTRY(hwlat, hwlat_entry,
__field( u64, duration )
__field( u64, outer_duration )
__field( u64, nmi_total_ts )
- __field_struct( struct timespec, timestamp )
- __field_desc( long, timestamp, tv_sec )
+ __field_struct( struct timespec64, timestamp )
+ __field_desc( s64, timestamp, tv_sec )
__field_desc( long, timestamp, tv_nsec )
__field( unsigned int, nmi_count )
__field( unsigned int, seqnum )
),
- F_printk("cnt:%u\tts:%010lu.%010lu\tinner:%llu\touter:%llunmi-ts:%llu\tnmi-count:%u\n",
+ F_printk("cnt:%u\tts:%010llu.%010lu\tinner:%llu\touter:%llunmi-ts:%llu\tnmi-count:%u\n",
__entry->seqnum,
__entry->tv_sec,
__entry->tv_nsec,
diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c
index 21ea6ae..d7c8e4e 100644
--- a/kernel/trace/trace_hwlat.c
+++ b/kernel/trace/trace_hwlat.c
@@ -79,12 +79,12 @@ static u64 last_tracing_thresh = DEFAULT_LAT_THRESHOLD * NSEC_PER_USEC;
/* Individual latency samples are stored here when detected. */
struct hwlat_sample {
- u64 seqnum; /* unique sequence */
- u64 duration; /* delta */
- u64 outer_duration; /* delta (outer loop) */
- u64 nmi_total_ts; /* Total time spent in NMIs */
- struct timespec timestamp; /* wall time */
- int nmi_count; /* # NMIs during this sample */
+ u64 seqnum; /* unique sequence */
+ u64 duration; /* delta */
+ u64 outer_duration; /* delta (outer loop) */
+ u64 nmi_total_ts; /* Total time spent in NMIs */
+ struct timespec64 timestamp; /* wall time */
+ int nmi_count; /* # NMIs during this sample */
};
/* keep the global state somewhere. */
@@ -250,7 +250,7 @@ static int get_sample(void)
s.seqnum = hwlat_data.count;
s.duration = sample;
s.outer_duration = outer_sample;
- s.timestamp = CURRENT_TIME;
+ ktime_get_real_ts64(&s.timestamp);
s.nmi_total_ts = nmi_total_ts;
s.nmi_count = nmi_count;
trace_hwlat_sample(&s);
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 02a4aeb..08f9bab 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -4,7 +4,6 @@
* Copyright (C) 2008 Red Hat Inc, Steven Rostedt <srostedt@redhat.com>
*
*/
-
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/ftrace.h>
@@ -1161,11 +1160,11 @@ trace_hwlat_print(struct trace_iterator *iter, int flags,
trace_assign_type(field, entry);
- trace_seq_printf(s, "#%-5u inner/outer(us): %4llu/%-5llu ts:%ld.%09ld",
+ trace_seq_printf(s, "#%-5u inner/outer(us): %4llu/%-5llu ts:%lld.%09ld",
field->seqnum,
field->duration,
field->outer_duration,
- field->timestamp.tv_sec,
+ (long long)field->timestamp.tv_sec,
field->timestamp.tv_nsec);
if (field->nmi_count) {
@@ -1195,10 +1194,10 @@ trace_hwlat_raw(struct trace_iterator *iter, int flags,
trace_assign_type(field, iter->ent);
- trace_seq_printf(s, "%llu %lld %ld %09ld %u\n",
+ trace_seq_printf(s, "%llu %lld %lld %09ld %u\n",
field->duration,
field->outer_duration,
- field->timestamp.tv_sec,
+ (long long)field->timestamp.tv_sec,
field->timestamp.tv_nsec,
field->seqnum);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e2a617e..e4587eb 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1719,19 +1719,21 @@
Documentation/fault-injection/provoke-crashes.txt
config TEST_LIST_SORT
- bool "Linked list sorting test"
- depends on DEBUG_KERNEL
+ tristate "Linked list sorting test"
+ depends on DEBUG_KERNEL || m
help
Enable this to turn on 'list_sort()' function test. This test is
- executed only once during system boot, so affects only boot time.
+ executed only once during system boot (so affects only boot time),
+ or at module load time.
If unsure, say N.
config TEST_SORT
- bool "Array-based sort test"
- depends on DEBUG_KERNEL
+ tristate "Array-based sort test"
+ depends on DEBUG_KERNEL || m
help
- This option enables the self-test function of 'sort()' at boot.
+ This option enables the self-test function of 'sort()' at boot,
+ or at module load time.
If unsure, say N.
diff --git a/lib/Makefile b/lib/Makefile
index a155c73..0166fbc 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -52,6 +52,7 @@
obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
obj-$(CONFIG_TEST_KASAN) += test_kasan.o
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
+obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o
obj-$(CONFIG_TEST_LKM) += test_module.o
obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o
obj-$(CONFIG_TEST_SORT) += test_sort.o
diff --git a/lib/devres.c b/lib/devres.c
index cb1464c..78eca71 100644
--- a/lib/devres.c
+++ b/lib/devres.c
@@ -17,7 +17,7 @@ static int devm_ioremap_match(struct device *dev, void *res, void *match_data)
/**
* devm_ioremap - Managed ioremap()
* @dev: Generic device to remap IO address for
- * @offset: BUS offset to map
+ * @offset: Resource address to map
* @size: Size of map
*
* Managed ioremap(). Map is automatically unmapped on driver detach.
@@ -45,7 +45,7 @@ EXPORT_SYMBOL(devm_ioremap);
/**
* devm_ioremap_nocache - Managed ioremap_nocache()
* @dev: Generic device to remap IO address for
- * @offset: BUS offset to map
+ * @offset: Resource address to map
* @size: Size of map
*
* Managed ioremap_nocache(). Map is automatically unmapped on driver
@@ -74,7 +74,7 @@ EXPORT_SYMBOL(devm_ioremap_nocache);
/**
* devm_ioremap_wc - Managed ioremap_wc()
* @dev: Generic device to remap IO address for
- * @offset: BUS offset to map
+ * @offset: Resource address to map
* @size: Size of map
*
* Managed ioremap_wc(). Map is automatically unmapped on driver detach.
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index fe4d50c..ea4cc3d 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -1498,7 +1498,7 @@ void debug_dma_alloc_coherent(struct device *dev, size_t size,
entry->type = dma_debug_coherent;
entry->dev = dev;
entry->pfn = page_to_pfn(virt_to_page(virt));
- entry->offset = (size_t) virt & ~PAGE_MASK;
+ entry->offset = offset_in_page(virt);
entry->size = size;
entry->dev_addr = dma_addr;
entry->direction = DMA_BIDIRECTIONAL;
@@ -1514,7 +1514,7 @@ void debug_dma_free_coherent(struct device *dev, size_t size,
.type = dma_debug_coherent,
.dev = dev,
.pfn = page_to_pfn(virt_to_page(virt)),
- .offset = (size_t) virt & ~PAGE_MASK,
+ .offset = offset_in_page(virt),
.dev_addr = addr,
.size = size,
.direction = DMA_BIDIRECTIONAL,
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index 6a823a5..4ff1571 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -56,7 +56,7 @@ static void fail_dump(struct fault_attr *attr)
static bool fail_task(struct fault_attr *attr, struct task_struct *task)
{
- return !in_interrupt() && task->make_it_fail;
+ return in_task() && task->make_it_fail;
}
#define MAX_STACK_TRACE_DEPTH 32
diff --git a/lib/iov_iter.c b/lib/iov_iter.c
index 4952311..f835964 100644
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -790,6 +790,8 @@ void iov_iter_revert(struct iov_iter *i, size_t unroll)
{
if (!unroll)
return;
+ if (WARN_ON(unroll > MAX_RW_COUNT))
+ return;
i->count += unroll;
if (unlikely(i->type & ITER_PIPE)) {
struct pipe_inode_info *pipe = i->pipe;
@@ -1028,10 +1030,7 @@ EXPORT_SYMBOL(iov_iter_get_pages);
static struct page **get_pages_array(size_t n)
{
- struct page **p = kmalloc(n * sizeof(struct page *), GFP_KERNEL);
- if (!p)
- p = vmalloc(n * sizeof(struct page *));
- return p;
+ return kvmalloc_array(n, sizeof(struct page *), GFP_KERNEL);
}
static ssize_t pipe_get_pages_alloc(struct iov_iter *i,
diff --git a/lib/list_sort.c b/lib/list_sort.c
index 3fe4010..9e9acc3 100644
--- a/lib/list_sort.c
+++ b/lib/list_sort.c
@@ -1,6 +1,3 @@
-
-#define pr_fmt(fmt) "list_sort_test: " fmt
-
#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/compiler.h>
@@ -145,149 +142,3 @@ void list_sort(void *priv, struct list_head *head,
merge_and_restore_back_links(priv, cmp, head, part[max_lev], list);
}
EXPORT_SYMBOL(list_sort);
-
-#ifdef CONFIG_TEST_LIST_SORT
-
-#include <linux/slab.h>
-#include <linux/random.h>
-
-/*
- * The pattern of set bits in the list length determines which cases
- * are hit in list_sort().
- */
-#define TEST_LIST_LEN (512+128+2) /* not including head */
-
-#define TEST_POISON1 0xDEADBEEF
-#define TEST_POISON2 0xA324354C
-
-struct debug_el {
- unsigned int poison1;
- struct list_head list;
- unsigned int poison2;
- int value;
- unsigned serial;
-};
-
-/* Array, containing pointers to all elements in the test list */
-static struct debug_el **elts __initdata;
-
-static int __init check(struct debug_el *ela, struct debug_el *elb)
-{
- if (ela->serial >= TEST_LIST_LEN) {
- pr_err("error: incorrect serial %d\n", ela->serial);
- return -EINVAL;
- }
- if (elb->serial >= TEST_LIST_LEN) {
- pr_err("error: incorrect serial %d\n", elb->serial);
- return -EINVAL;
- }
- if (elts[ela->serial] != ela || elts[elb->serial] != elb) {
- pr_err("error: phantom element\n");
- return -EINVAL;
- }
- if (ela->poison1 != TEST_POISON1 || ela->poison2 != TEST_POISON2) {
- pr_err("error: bad poison: %#x/%#x\n",
- ela->poison1, ela->poison2);
- return -EINVAL;
- }
- if (elb->poison1 != TEST_POISON1 || elb->poison2 != TEST_POISON2) {
- pr_err("error: bad poison: %#x/%#x\n",
- elb->poison1, elb->poison2);
- return -EINVAL;
- }
- return 0;
-}
-
-static int __init cmp(void *priv, struct list_head *a, struct list_head *b)
-{
- struct debug_el *ela, *elb;
-
- ela = container_of(a, struct debug_el, list);
- elb = container_of(b, struct debug_el, list);
-
- check(ela, elb);
- return ela->value - elb->value;
-}
-
-static int __init list_sort_test(void)
-{
- int i, count = 1, err = -ENOMEM;
- struct debug_el *el;
- struct list_head *cur;
- LIST_HEAD(head);
-
- pr_debug("start testing list_sort()\n");
-
- elts = kcalloc(TEST_LIST_LEN, sizeof(*elts), GFP_KERNEL);
- if (!elts) {
- pr_err("error: cannot allocate memory\n");
- return err;
- }
-
- for (i = 0; i < TEST_LIST_LEN; i++) {
- el = kmalloc(sizeof(*el), GFP_KERNEL);
- if (!el) {
- pr_err("error: cannot allocate memory\n");
- goto exit;
- }
- /* force some equivalencies */
- el->value = prandom_u32() % (TEST_LIST_LEN / 3);
- el->serial = i;
- el->poison1 = TEST_POISON1;
- el->poison2 = TEST_POISON2;
- elts[i] = el;
- list_add_tail(&el->list, &head);
- }
-
- list_sort(NULL, &head, cmp);
-
- err = -EINVAL;
- for (cur = head.next; cur->next != &head; cur = cur->next) {
- struct debug_el *el1;
- int cmp_result;
-
- if (cur->next->prev != cur) {
- pr_err("error: list is corrupted\n");
- goto exit;
- }
-
- cmp_result = cmp(NULL, cur, cur->next);
- if (cmp_result > 0) {
- pr_err("error: list is not sorted\n");
- goto exit;
- }
-
- el = container_of(cur, struct debug_el, list);
- el1 = container_of(cur->next, struct debug_el, list);
- if (cmp_result == 0 && el->serial >= el1->serial) {
- pr_err("error: order of equivalent elements not "
- "preserved\n");
- goto exit;
- }
-
- if (check(el, el1)) {
- pr_err("error: element check failed\n");
- goto exit;
- }
- count++;
- }
- if (head.prev != cur) {
- pr_err("error: list is corrupted\n");
- goto exit;
- }
-
-
- if (count != TEST_LIST_LEN) {
- pr_err("error: bad list length %d", count);
- goto exit;
- }
-
- err = 0;
-exit:
- for (i = 0; i < TEST_LIST_LEN; i++)
- kfree(elts[i]);
- kfree(elts);
- return err;
-}
-late_initcall(list_sort_test);
-#endif /* CONFIG_TEST_LIST_SORT */
diff --git a/lib/rhashtable.c b/lib/rhashtable.c
index a930e43..d9e7274 100644
--- a/lib/rhashtable.c
+++ b/lib/rhashtable.c
@@ -86,16 +86,9 @@ static int alloc_bucket_locks(struct rhashtable *ht, struct bucket_table *tbl,
size = min(size, 1U << tbl->nest);
if (sizeof(spinlock_t) != 0) {
- tbl->locks = NULL;
-#ifdef CONFIG_NUMA
- if (size * sizeof(spinlock_t) > PAGE_SIZE &&
- gfp == GFP_KERNEL)
- tbl->locks = vmalloc(size * sizeof(spinlock_t));
-#endif
- if (gfp != GFP_KERNEL)
- gfp |= __GFP_NOWARN | __GFP_NORETRY;
-
- if (!tbl->locks)
+ if (gfpflags_allow_blocking(gfp))
+ tbl->locks = kvmalloc(size * sizeof(spinlock_t), gfp);
+ else
tbl->locks = kmalloc_array(size, sizeof(spinlock_t),
gfp);
if (!tbl->locks)
diff --git a/lib/test_list_sort.c b/lib/test_list_sort.c
new file mode 100644
index 0000000..28e8173
--- /dev/null
+++ b/lib/test_list_sort.c
@@ -0,0 +1,150 @@
+#define pr_fmt(fmt) "list_sort_test: " fmt
+
+#include <linux/kernel.h>
+#include <linux/list_sort.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+
+/*
+ * The pattern of set bits in the list length determines which cases
+ * are hit in list_sort().
+ */
+#define TEST_LIST_LEN (512+128+2) /* not including head */
+
+#define TEST_POISON1 0xDEADBEEF
+#define TEST_POISON2 0xA324354C
+
+struct debug_el {
+ unsigned int poison1;
+ struct list_head list;
+ unsigned int poison2;
+ int value;
+ unsigned serial;
+};
+
+/* Array, containing pointers to all elements in the test list */
+static struct debug_el **elts __initdata;
+
+static int __init check(struct debug_el *ela, struct debug_el *elb)
+{
+ if (ela->serial >= TEST_LIST_LEN) {
+ pr_err("error: incorrect serial %d\n", ela->serial);
+ return -EINVAL;
+ }
+ if (elb->serial >= TEST_LIST_LEN) {
+ pr_err("error: incorrect serial %d\n", elb->serial);
+ return -EINVAL;
+ }
+ if (elts[ela->serial] != ela || elts[elb->serial] != elb) {
+ pr_err("error: phantom element\n");
+ return -EINVAL;
+ }
+ if (ela->poison1 != TEST_POISON1 || ela->poison2 != TEST_POISON2) {
+ pr_err("error: bad poison: %#x/%#x\n",
+ ela->poison1, ela->poison2);
+ return -EINVAL;
+ }
+ if (elb->poison1 != TEST_POISON1 || elb->poison2 != TEST_POISON2) {
+ pr_err("error: bad poison: %#x/%#x\n",
+ elb->poison1, elb->poison2);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __init cmp(void *priv, struct list_head *a, struct list_head *b)
+{
+ struct debug_el *ela, *elb;
+
+ ela = container_of(a, struct debug_el, list);
+ elb = container_of(b, struct debug_el, list);
+
+ check(ela, elb);
+ return ela->value - elb->value;
+}
+
+static int __init list_sort_test(void)
+{
+ int i, count = 1, err = -ENOMEM;
+ struct debug_el *el;
+ struct list_head *cur;
+ LIST_HEAD(head);
+
+ pr_debug("start testing list_sort()\n");
+
+ elts = kcalloc(TEST_LIST_LEN, sizeof(*elts), GFP_KERNEL);
+ if (!elts) {
+ pr_err("error: cannot allocate memory\n");
+ return err;
+ }
+
+ for (i = 0; i < TEST_LIST_LEN; i++) {
+ el = kmalloc(sizeof(*el), GFP_KERNEL);
+ if (!el) {
+ pr_err("error: cannot allocate memory\n");
+ goto exit;
+ }
+ /* force some equivalencies */
+ el->value = prandom_u32() % (TEST_LIST_LEN / 3);
+ el->serial = i;
+ el->poison1 = TEST_POISON1;
+ el->poison2 = TEST_POISON2;
+ elts[i] = el;
+ list_add_tail(&el->list, &head);
+ }
+
+ list_sort(NULL, &head, cmp);
+
+ err = -EINVAL;
+ for (cur = head.next; cur->next != &head; cur = cur->next) {
+ struct debug_el *el1;
+ int cmp_result;
+
+ if (cur->next->prev != cur) {
+ pr_err("error: list is corrupted\n");
+ goto exit;
+ }
+
+ cmp_result = cmp(NULL, cur, cur->next);
+ if (cmp_result > 0) {
+ pr_err("error: list is not sorted\n");
+ goto exit;
+ }
+
+ el = container_of(cur, struct debug_el, list);
+ el1 = container_of(cur->next, struct debug_el, list);
+ if (cmp_result == 0 && el->serial >= el1->serial) {
+ pr_err("error: order of equivalent elements not "
+ "preserved\n");
+ goto exit;
+ }
+
+ if (check(el, el1)) {
+ pr_err("error: element check failed\n");
+ goto exit;
+ }
+ count++;
+ }
+ if (head.prev != cur) {
+ pr_err("error: list is corrupted\n");
+ goto exit;
+ }
+
+
+ if (count != TEST_LIST_LEN) {
+ pr_err("error: bad list length %d", count);
+ goto exit;
+ }
+
+ err = 0;
+exit:
+ for (i = 0; i < TEST_LIST_LEN; i++)
+ kfree(elts[i]);
+ kfree(elts);
+ return err;
+}
+module_init(list_sort_test);
+MODULE_LICENSE("GPL");
diff --git a/lib/test_sort.c b/lib/test_sort.c
index 4db3911..d389c1c 100644
--- a/lib/test_sort.c
+++ b/lib/test_sort.c
@@ -1,11 +1,8 @@
#include <linux/sort.h>
#include <linux/slab.h>
-#include <linux/init.h>
+#include <linux/module.h>
-/*
- * A simple boot-time regression test
- * License: GPL
- */
+/* a simple boot-time regression test */
#define TEST_LEN 1000
@@ -41,4 +38,6 @@ static int __init test_sort_init(void)
kfree(a);
return err;
}
-subsys_initcall(test_sort_init);
+
+module_init(test_sort_init);
+MODULE_LICENSE("GPL");
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 176641c..2d41de3 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -1477,6 +1477,9 @@ int kptr_restrict __read_mostly;
* by an extra set of alphanumeric characters that are extended format
* specifiers.
*
+ * Please update scripts/checkpatch.pl when adding/removing conversion
+ * characters. (Search for "check for vsprintf extension").
+ *
* Right now we handle:
*
* - 'F' For symbolic function descriptor pointers with offset
diff --git a/lib/zlib_inflate/inftrees.c b/lib/zlib_inflate/inftrees.c
index 3fe6ce5..0289430 100644
--- a/lib/zlib_inflate/inftrees.c
+++ b/lib/zlib_inflate/inftrees.c
@@ -109,7 +109,7 @@ int zlib_inflate_table(codetype type, unsigned short *lens, unsigned codes,
*bits = 1;
return 0; /* no symbols, but wait for decoding to report error */
}
- for (min = 1; min <= MAXBITS; min++)
+ for (min = 1; min < MAXBITS; min++)
if (count[min] != 0) break;
if (root < min) root = min;
diff --git a/mm/compaction.c b/mm/compaction.c
index 09c5282..613c59e 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -89,11 +89,6 @@ static void map_pages(struct list_head *list)
list_splice(&tmp_list, list);
}
-static inline bool migrate_async_suitable(int migratetype)
-{
- return is_migrate_cma(migratetype) || migratetype == MIGRATE_MOVABLE;
-}
-
#ifdef CONFIG_COMPACTION
int PageMovable(struct page *page)
@@ -988,6 +983,22 @@ isolate_migratepages_range(struct compact_control *cc, unsigned long start_pfn,
#endif /* CONFIG_COMPACTION || CONFIG_CMA */
#ifdef CONFIG_COMPACTION
+static bool suitable_migration_source(struct compact_control *cc,
+ struct page *page)
+{
+ int block_mt;
+
+ if ((cc->mode != MIGRATE_ASYNC) || !cc->direct_compaction)
+ return true;
+
+ block_mt = get_pageblock_migratetype(page);
+
+ if (cc->migratetype == MIGRATE_MOVABLE)
+ return is_migrate_movable(block_mt);
+ else
+ return block_mt == cc->migratetype;
+}
+
/* Returns true if the page is within a block suitable for migration to */
static bool suitable_migration_target(struct compact_control *cc,
struct page *page)
@@ -1007,7 +1018,7 @@ static bool suitable_migration_target(struct compact_control *cc,
return true;
/* If the block is MIGRATE_MOVABLE or MIGRATE_CMA, allow migration */
- if (migrate_async_suitable(get_pageblock_migratetype(page)))
+ if (is_migrate_movable(get_pageblock_migratetype(page)))
return true;
/* Otherwise skip the block */
@@ -1242,8 +1253,7 @@ static isolate_migrate_t isolate_migratepages(struct zone *zone,
* Async compaction is optimistic to see if the minimum amount
* of work satisfies the allocation.
*/
- if (cc->mode == MIGRATE_ASYNC &&
- !migrate_async_suitable(get_pageblock_migratetype(page)))
+ if (!suitable_migration_source(cc, page))
continue;
/* Perform the isolation */
@@ -1276,11 +1286,11 @@ static inline bool is_via_compact_memory(int order)
return order == -1;
}
-static enum compact_result __compact_finished(struct zone *zone, struct compact_control *cc,
- const int migratetype)
+static enum compact_result __compact_finished(struct zone *zone,
+ struct compact_control *cc)
{
unsigned int order;
- unsigned long watermark;
+ const int migratetype = cc->migratetype;
if (cc->contended || fatal_signal_pending(current))
return COMPACT_CONTENDED;
@@ -1308,12 +1318,16 @@ static enum compact_result __compact_finished(struct zone *zone, struct compact_
if (is_via_compact_memory(cc->order))
return COMPACT_CONTINUE;
- /* Compaction run is not finished if the watermark is not met */
- watermark = zone->watermark[cc->alloc_flags & ALLOC_WMARK_MASK];
-
- if (!zone_watermark_ok(zone, cc->order, watermark, cc->classzone_idx,
- cc->alloc_flags))
- return COMPACT_CONTINUE;
+ if (cc->finishing_block) {
+ /*
+ * We have finished the pageblock, but better check again that
+ * we really succeeded.
+ */
+ if (IS_ALIGNED(cc->migrate_pfn, pageblock_nr_pages))
+ cc->finishing_block = false;
+ else
+ return COMPACT_CONTINUE;
+ }
/* Direct compactor: Is a suitable page free? */
for (order = cc->order; order < MAX_ORDER; order++) {
@@ -1335,20 +1349,40 @@ static enum compact_result __compact_finished(struct zone *zone, struct compact_
* other migratetype buddy lists.
*/
if (find_suitable_fallback(area, order, migratetype,
- true, &can_steal) != -1)
- return COMPACT_SUCCESS;
+ true, &can_steal) != -1) {
+
+ /* movable pages are OK in any pageblock */
+ if (migratetype == MIGRATE_MOVABLE)
+ return COMPACT_SUCCESS;
+
+ /*
+ * We are stealing for a non-movable allocation. Make
+ * sure we finish compacting the current pageblock
+ * first so it is as free as possible and we won't
+ * have to steal another one soon. This only applies
+ * to sync compaction, as async compaction operates
+ * on pageblocks of the same migratetype.
+ */
+ if (cc->mode == MIGRATE_ASYNC ||
+ IS_ALIGNED(cc->migrate_pfn,
+ pageblock_nr_pages)) {
+ return COMPACT_SUCCESS;
+ }
+
+ cc->finishing_block = true;
+ return COMPACT_CONTINUE;
+ }
}
return COMPACT_NO_SUITABLE_PAGE;
}
static enum compact_result compact_finished(struct zone *zone,
- struct compact_control *cc,
- const int migratetype)
+ struct compact_control *cc)
{
int ret;
- ret = __compact_finished(zone, cc, migratetype);
+ ret = __compact_finished(zone, cc);
trace_mm_compaction_finished(zone, cc->order, ret);
if (ret == COMPACT_NO_SUITABLE_PAGE)
ret = COMPACT_CONTINUE;
@@ -1481,9 +1515,9 @@ static enum compact_result compact_zone(struct zone *zone, struct compact_contro
enum compact_result ret;
unsigned long start_pfn = zone->zone_start_pfn;
unsigned long end_pfn = zone_end_pfn(zone);
- const int migratetype = gfpflags_to_migratetype(cc->gfp_mask);
const bool sync = cc->mode != MIGRATE_ASYNC;
+ cc->migratetype = gfpflags_to_migratetype(cc->gfp_mask);
ret = compaction_suitable(zone, cc->order, cc->alloc_flags,
cc->classzone_idx);
/* Compaction is likely to fail */
@@ -1533,8 +1567,7 @@ static enum compact_result compact_zone(struct zone *zone, struct compact_contro
migrate_prep_local();
- while ((ret = compact_finished(zone, cc, migratetype)) ==
- COMPACT_CONTINUE) {
+ while ((ret = compact_finished(zone, cc)) == COMPACT_CONTINUE) {
int err;
switch (isolate_migratepages(zone, cc)) {
diff --git a/mm/filemap.c b/mm/filemap.c
index 681da61..6f1be57 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2050,7 +2050,7 @@ generic_file_read_iter(struct kiocb *iocb, struct iov_iter *iter)
iocb->ki_pos += retval;
count -= retval;
}
- iov_iter_revert(iter, iov_iter_count(iter) - count);
+ iov_iter_revert(iter, count - iov_iter_count(iter));
/*
* Btrfs can have a short DIO read if we encounter
@@ -2791,12 +2791,6 @@ ssize_t generic_perform_write(struct file *file,
ssize_t written = 0;
unsigned int flags = 0;
- /*
- * Copies from kernel address space cannot fail (NFSD is a big user).
- */
- if (!iter_is_iovec(i))
- flags |= AOP_FLAG_UNINTERRUPTIBLE;
-
do {
struct page *page;
unsigned long offset; /* Offset into pagecache page */
diff --git a/mm/frame_vector.c b/mm/frame_vector.c
index db77dcb..72ebec1 100644
--- a/mm/frame_vector.c
+++ b/mm/frame_vector.c
@@ -200,10 +200,7 @@ struct frame_vector *frame_vector_create(unsigned int nr_frames)
* Avoid higher order allocations, use vmalloc instead. It should
* be rare anyway.
*/
- if (size <= PAGE_SIZE)
- vec = kmalloc(size, GFP_KERNEL);
- else
- vec = vmalloc(size);
+ vec = kvmalloc(size, GFP_KERNEL);
if (!vec)
return NULL;
vec->nr_allocated = nr_frames;
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index b787c4c..a84909c 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -715,7 +715,8 @@ int do_huge_pmd_anonymous_page(struct vm_fault *vmf)
}
static void insert_pfn_pmd(struct vm_area_struct *vma, unsigned long addr,
- pmd_t *pmd, pfn_t pfn, pgprot_t prot, bool write)
+ pmd_t *pmd, pfn_t pfn, pgprot_t prot, bool write,
+ pgtable_t pgtable)
{
struct mm_struct *mm = vma->vm_mm;
pmd_t entry;
@@ -729,6 +730,12 @@ static void insert_pfn_pmd(struct vm_area_struct *vma, unsigned long addr,
entry = pmd_mkyoung(pmd_mkdirty(entry));
entry = maybe_pmd_mkwrite(entry, vma);
}
+
+ if (pgtable) {
+ pgtable_trans_huge_deposit(mm, pmd, pgtable);
+ atomic_long_inc(&mm->nr_ptes);
+ }
+
set_pmd_at(mm, addr, pmd, entry);
update_mmu_cache_pmd(vma, addr, pmd);
spin_unlock(ptl);
@@ -738,6 +745,7 @@ int vmf_insert_pfn_pmd(struct vm_area_struct *vma, unsigned long addr,
pmd_t *pmd, pfn_t pfn, bool write)
{
pgprot_t pgprot = vma->vm_page_prot;
+ pgtable_t pgtable = NULL;
/*
* If we had pmd_special, we could avoid all these restrictions,
* but we need to be consistent with PTEs and architectures that
@@ -752,9 +760,15 @@ int vmf_insert_pfn_pmd(struct vm_area_struct *vma, unsigned long addr,
if (addr < vma->vm_start || addr >= vma->vm_end)
return VM_FAULT_SIGBUS;
+ if (arch_needs_pgtable_deposit()) {
+ pgtable = pte_alloc_one(vma->vm_mm, addr);
+ if (!pgtable)
+ return VM_FAULT_OOM;
+ }
+
track_pfn_insert(vma, &pgprot, pfn);
- insert_pfn_pmd(vma, addr, pmd, pfn, pgprot, write);
+ insert_pfn_pmd(vma, addr, pmd, pfn, pgprot, write, pgtable);
return VM_FAULT_NOPAGE;
}
EXPORT_SYMBOL_GPL(vmf_insert_pfn_pmd);
@@ -1611,12 +1625,13 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
tlb->fullmm);
tlb_remove_pmd_tlb_entry(tlb, pmd, addr);
if (vma_is_dax(vma)) {
+ if (arch_needs_pgtable_deposit())
+ zap_deposited_table(tlb->mm, pmd);
spin_unlock(ptl);
if (is_huge_zero_pmd(orig_pmd))
tlb_remove_page_size(tlb, pmd_page(orig_pmd), HPAGE_PMD_SIZE);
} else if (is_huge_zero_pmd(orig_pmd)) {
- pte_free(tlb->mm, pgtable_trans_huge_withdraw(tlb->mm, pmd));
- atomic_long_dec(&tlb->mm->nr_ptes);
+ zap_deposited_table(tlb->mm, pmd);
spin_unlock(ptl);
tlb_remove_page_size(tlb, pmd_page(orig_pmd), HPAGE_PMD_SIZE);
} else {
@@ -1625,10 +1640,7 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
VM_BUG_ON_PAGE(page_mapcount(page) < 0, page);
VM_BUG_ON_PAGE(!PageHead(page), page);
if (PageAnon(page)) {
- pgtable_t pgtable;
- pgtable = pgtable_trans_huge_withdraw(tlb->mm, pmd);
- pte_free(tlb->mm, pgtable);
- atomic_long_dec(&tlb->mm->nr_ptes);
+ zap_deposited_table(tlb->mm, pmd);
add_mm_counter(tlb->mm, MM_ANONPAGES, -HPAGE_PMD_NR);
} else {
if (arch_needs_pgtable_deposit())
diff --git a/mm/internal.h b/mm/internal.h
index 04d08ef..0e4f558 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -183,6 +183,7 @@ extern int user_min_free_kbytes;
struct compact_control {
struct list_head freepages; /* List of free pages to migrate to */
struct list_head migratepages; /* List of pages being migrated */
+ struct zone *zone;
unsigned long nr_freepages; /* Number of isolated free pages */
unsigned long nr_migratepages; /* Number of pages to migrate */
unsigned long total_migrate_scanned;
@@ -190,17 +191,18 @@ struct compact_control {
unsigned long free_pfn; /* isolate_freepages search base */
unsigned long migrate_pfn; /* isolate_migratepages search base */
unsigned long last_migrated_pfn;/* Not yet flushed page being freed */
+ const gfp_t gfp_mask; /* gfp mask of a direct compactor */
+ int order; /* order a direct compactor needs */
+ int migratetype; /* migratetype of direct compactor */
+ const unsigned int alloc_flags; /* alloc flags of a direct compactor */
+ const int classzone_idx; /* zone index of a direct compactor */
enum migrate_mode mode; /* Async or sync migration mode */
bool ignore_skip_hint; /* Scan blocks even if marked skip */
bool ignore_block_suitable; /* Scan blocks considered unsuitable */
bool direct_compaction; /* False from kcompactd or /proc/... */
bool whole_zone; /* Whole zone should/has been scanned */
- int order; /* order a direct compactor needs */
- const gfp_t gfp_mask; /* gfp mask of a direct compactor */
- const unsigned int alloc_flags; /* alloc flags of a direct compactor */
- const int classzone_idx; /* zone index of a direct compactor */
- struct zone *zone;
bool contended; /* Signal lock or sched contention */
+ bool finishing_block; /* Finishing current pageblock */
};
unsigned long
diff --git a/mm/kasan/kasan.c b/mm/kasan/kasan.c
index 9348d27..b10da59 100644
--- a/mm/kasan/kasan.c
+++ b/mm/kasan/kasan.c
@@ -691,7 +691,7 @@ int kasan_module_alloc(void *addr, size_t size)
ret = __vmalloc_node_range(shadow_size, 1, shadow_start,
shadow_start + shadow_size,
- GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
+ GFP_KERNEL | __GFP_ZERO,
PAGE_KERNEL, VM_NO_GUARD, NUMA_NO_NODE,
__builtin_return_address(0));
diff --git a/mm/nommu.c b/mm/nommu.c
index 2d131b9..fc184f5 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -237,12 +237,16 @@ void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
}
EXPORT_SYMBOL(__vmalloc);
+void *__vmalloc_node_flags(unsigned long size, int node, gfp_t flags)
+{
+ return __vmalloc(size, flags, PAGE_KERNEL);
+}
+
void *vmalloc_user(unsigned long size)
{
void *ret;
- ret = __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
- PAGE_KERNEL);
+ ret = __vmalloc(size, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
if (ret) {
struct vm_area_struct *vma;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 2c25de4..f9e450c 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1832,9 +1832,9 @@ static inline struct page *__rmqueue_cma_fallback(struct zone *zone,
* Note that start_page and end_pages are not aligned on a pageblock
* boundary. If alignment is required, use move_freepages_block()
*/
-int move_freepages(struct zone *zone,
+static int move_freepages(struct zone *zone,
struct page *start_page, struct page *end_page,
- int migratetype)
+ int migratetype, int *num_movable)
{
struct page *page;
unsigned int order;
@@ -1851,6 +1851,9 @@ int move_freepages(struct zone *zone,
VM_BUG_ON(page_zone(start_page) != page_zone(end_page));
#endif
+ if (num_movable)
+ *num_movable = 0;
+
for (page = start_page; page <= end_page;) {
if (!pfn_valid_within(page_to_pfn(page))) {
page++;
@@ -1861,6 +1864,15 @@ int move_freepages(struct zone *zone,
VM_BUG_ON_PAGE(page_to_nid(page) != zone_to_nid(zone), page);
if (!PageBuddy(page)) {
+ /*
+ * We assume that pages that could be isolated for
+ * migration are movable. But we don't actually try
+ * isolating, as that would be expensive.
+ */
+ if (num_movable &&
+ (PageLRU(page) || __PageMovable(page)))
+ (*num_movable)++;
+
page++;
continue;
}
@@ -1876,7 +1888,7 @@ int move_freepages(struct zone *zone,
}
int move_freepages_block(struct zone *zone, struct page *page,
- int migratetype)
+ int migratetype, int *num_movable)
{
unsigned long start_pfn, end_pfn;
struct page *start_page, *end_page;
@@ -1893,7 +1905,8 @@ int move_freepages_block(struct zone *zone, struct page *page,
if (!zone_spans_pfn(zone, end_pfn))
return 0;
- return move_freepages(zone, start_page, end_page, migratetype);
+ return move_freepages(zone, start_page, end_page, migratetype,
+ num_movable);
}
static void change_pageblock_range(struct page *pageblock_page,
@@ -1943,28 +1956,79 @@ static bool can_steal_fallback(unsigned int order, int start_mt)
/*
* This function implements actual steal behaviour. If order is large enough,
* we can steal whole pageblock. If not, we first move freepages in this
- * pageblock and check whether half of pages are moved or not. If half of
- * pages are moved, we can change migratetype of pageblock and permanently
- * use it's pages as requested migratetype in the future.
+ * pageblock to our migratetype and determine how many already-allocated pages
+ * are there in the pageblock with a compatible migratetype. If at least half
+ * of pages are free or compatible, we can change migratetype of the pageblock
+ * itself, so pages freed in the future will be put on the correct free list.
*/
static void steal_suitable_fallback(struct zone *zone, struct page *page,
- int start_type)
+ int start_type, bool whole_block)
{
unsigned int current_order = page_order(page);
- int pages;
+ struct free_area *area;
+ int free_pages, movable_pages, alike_pages;
+ int old_block_type;
+
+ old_block_type = get_pageblock_migratetype(page);
+
+ /*
+ * This can happen due to races and we want to prevent broken
+ * highatomic accounting.
+ */
+ if (is_migrate_highatomic(old_block_type))
+ goto single_page;
/* Take ownership for orders >= pageblock_order */
if (current_order >= pageblock_order) {
change_pageblock_range(page, current_order, start_type);
- return;
+ goto single_page;
}
- pages = move_freepages_block(zone, page, start_type);
+ /* We are not allowed to try stealing from the whole block */
+ if (!whole_block)
+ goto single_page;
- /* Claim the whole block if over half of it is free */
- if (pages >= (1 << (pageblock_order-1)) ||
+ free_pages = move_freepages_block(zone, page, start_type,
+ &movable_pages);
+ /*
+ * Determine how many pages are compatible with our allocation.
+ * For movable allocation, it's the number of movable pages which
+ * we just obtained. For other types it's a bit more tricky.
+ */
+ if (start_type == MIGRATE_MOVABLE) {
+ alike_pages = movable_pages;
+ } else {
+ /*
+ * If we are falling back a RECLAIMABLE or UNMOVABLE allocation
+ * to MOVABLE pageblock, consider all non-movable pages as
+ * compatible. If it's UNMOVABLE falling back to RECLAIMABLE or
+ * vice versa, be conservative since we can't distinguish the
+ * exact migratetype of non-movable pages.
+ */
+ if (old_block_type == MIGRATE_MOVABLE)
+ alike_pages = pageblock_nr_pages
+ - (free_pages + movable_pages);
+ else
+ alike_pages = 0;
+ }
+
+ /* moving whole block can fail due to zone boundary conditions */
+ if (!free_pages)
+ goto single_page;
+
+ /*
+ * If a sufficient number of pages in the block are either free or of
+ * comparable migratability as our allocation, claim the whole block.
+ */
+ if (free_pages + alike_pages >= (1 << (pageblock_order-1)) ||
page_group_by_mobility_disabled)
set_pageblock_migratetype(page, start_type);
+
+ return;
+
+single_page:
+ area = &zone->free_area[current_order];
+ list_move(&page->lru, &area->free_list[start_type]);
}
/*
@@ -2034,7 +2098,7 @@ static void reserve_highatomic_pageblock(struct page *page, struct zone *zone,
&& !is_migrate_cma(mt)) {
zone->nr_reserved_highatomic += pageblock_nr_pages;
set_pageblock_migratetype(page, MIGRATE_HIGHATOMIC);
- move_freepages_block(zone, page, MIGRATE_HIGHATOMIC);
+ move_freepages_block(zone, page, MIGRATE_HIGHATOMIC, NULL);
}
out_unlock:
@@ -2111,7 +2175,8 @@ static bool unreserve_highatomic_pageblock(const struct alloc_context *ac,
* may increase.
*/
set_pageblock_migratetype(page, ac->migratetype);
- ret = move_freepages_block(zone, page, ac->migratetype);
+ ret = move_freepages_block(zone, page, ac->migratetype,
+ NULL);
if (ret) {
spin_unlock_irqrestore(&zone->lock, flags);
return ret;
@@ -2123,8 +2188,13 @@ static bool unreserve_highatomic_pageblock(const struct alloc_context *ac,
return false;
}
-/* Remove an element from the buddy allocator from the fallback list */
-static inline struct page *
+/*
+ * Try finding a free buddy page on the fallback list and put it on the free
+ * list of requested migratetype, possibly along with other pages from the same
+ * block, depending on fragmentation avoidance heuristics. Returns true if
+ * fallback was found so that __rmqueue_smallest() can grab it.
+ */
+static inline bool
__rmqueue_fallback(struct zone *zone, unsigned int order, int start_migratetype)
{
struct free_area *area;
@@ -2145,32 +2215,17 @@ __rmqueue_fallback(struct zone *zone, unsigned int order, int start_migratetype)
page = list_first_entry(&area->free_list[fallback_mt],
struct page, lru);
- if (can_steal && !is_migrate_highatomic_page(page))
- steal_suitable_fallback(zone, page, start_migratetype);
- /* Remove the page from the freelists */
- area->nr_free--;
- list_del(&page->lru);
- rmv_page_order(page);
-
- expand(zone, page, order, current_order, area,
- start_migratetype);
- /*
- * The pcppage_migratetype may differ from pageblock's
- * migratetype depending on the decisions in
- * find_suitable_fallback(). This is OK as long as it does not
- * differ for MIGRATE_CMA pageblocks. Those can be used as
- * fallback only via special __rmqueue_cma_fallback() function
- */
- set_pcppage_migratetype(page, start_migratetype);
+ steal_suitable_fallback(zone, page, start_migratetype,
+ can_steal);
trace_mm_page_alloc_extfrag(page, order, current_order,
start_migratetype, fallback_mt);
- return page;
+ return true;
}
- return NULL;
+ return false;
}
/*
@@ -2182,13 +2237,14 @@ static struct page *__rmqueue(struct zone *zone, unsigned int order,
{
struct page *page;
+retry:
page = __rmqueue_smallest(zone, order, migratetype);
if (unlikely(!page)) {
if (migratetype == MIGRATE_MOVABLE)
page = __rmqueue_cma_fallback(zone, order);
- if (!page)
- page = __rmqueue_fallback(zone, order, migratetype);
+ if (!page && __rmqueue_fallback(zone, order, migratetype))
+ goto retry;
}
trace_mm_page_alloc_zone_locked(page, order, migratetype);
@@ -3227,14 +3283,15 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order,
enum compact_priority prio, enum compact_result *compact_result)
{
struct page *page;
+ unsigned int noreclaim_flag;
if (!order)
return NULL;
- current->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
*compact_result = try_to_compact_pages(gfp_mask, order, alloc_flags, ac,
prio);
- current->flags &= ~PF_MEMALLOC;
+ memalloc_noreclaim_restore(noreclaim_flag);
if (*compact_result <= COMPACT_INACTIVE)
return NULL;
@@ -3381,12 +3438,13 @@ __perform_reclaim(gfp_t gfp_mask, unsigned int order,
{
struct reclaim_state reclaim_state;
int progress;
+ unsigned int noreclaim_flag;
cond_resched();
/* We now go into synchronous reclaim */
cpuset_memory_pressure_bump();
- current->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
lockdep_set_current_reclaim_state(gfp_mask);
reclaim_state.reclaimed_slab = 0;
current->reclaim_state = &reclaim_state;
@@ -3396,7 +3454,7 @@ __perform_reclaim(gfp_t gfp_mask, unsigned int order,
current->reclaim_state = NULL;
lockdep_clear_current_reclaim_state();
- current->flags &= ~PF_MEMALLOC;
+ memalloc_noreclaim_restore(noreclaim_flag);
cond_resched();
@@ -3609,6 +3667,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
struct alloc_context *ac)
{
bool can_direct_reclaim = gfp_mask & __GFP_DIRECT_RECLAIM;
+ const bool costly_order = order > PAGE_ALLOC_COSTLY_ORDER;
struct page *page = NULL;
unsigned int alloc_flags;
unsigned long did_some_progress;
@@ -3676,12 +3735,17 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
/*
* For costly allocations, try direct compaction first, as it's likely
- * that we have enough base pages and don't need to reclaim. Don't try
- * that for allocations that are allowed to ignore watermarks, as the
- * ALLOC_NO_WATERMARKS attempt didn't yet happen.
+ * that we have enough base pages and don't need to reclaim. For non-
+ * movable high-order allocations, do that as well, as compaction will
+ * try prevent permanent fragmentation by migrating from blocks of the
+ * same migratetype.
+ * Don't try this for allocations that are allowed to ignore
+ * watermarks, as the ALLOC_NO_WATERMARKS attempt didn't yet happen.
*/
- if (can_direct_reclaim && order > PAGE_ALLOC_COSTLY_ORDER &&
- !gfp_pfmemalloc_allowed(gfp_mask)) {
+ if (can_direct_reclaim &&
+ (costly_order ||
+ (order > 0 && ac->migratetype != MIGRATE_MOVABLE))
+ && !gfp_pfmemalloc_allowed(gfp_mask)) {
page = __alloc_pages_direct_compact(gfp_mask, order,
alloc_flags, ac,
INIT_COMPACT_PRIORITY,
@@ -3693,7 +3757,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
* Checks for costly allocations with __GFP_NORETRY, which
* includes THP page fault allocations
*/
- if (gfp_mask & __GFP_NORETRY) {
+ if (costly_order && (gfp_mask & __GFP_NORETRY)) {
/*
* If compaction is deferred for high-order allocations,
* it is because sync compaction recently failed. If
@@ -3774,7 +3838,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
* Do not retry costly high order allocations unless they are
* __GFP_REPEAT
*/
- if (order > PAGE_ALLOC_COSTLY_ORDER && !(gfp_mask & __GFP_REPEAT))
+ if (costly_order && !(gfp_mask & __GFP_REPEAT))
goto nopage;
if (should_reclaim_retry(gfp_mask, order, ac, alloc_flags,
diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index 7927bbb..5092e4e 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -66,7 +66,8 @@ static int set_migratetype_isolate(struct page *page,
set_pageblock_migratetype(page, MIGRATE_ISOLATE);
zone->nr_isolate_pageblock++;
- nr_pages = move_freepages_block(zone, page, MIGRATE_ISOLATE);
+ nr_pages = move_freepages_block(zone, page, MIGRATE_ISOLATE,
+ NULL);
__mod_zone_freepage_state(zone, -nr_pages, migratetype);
}
@@ -120,7 +121,7 @@ static void unset_migratetype_isolate(struct page *page, unsigned migratetype)
* pageblock scanning for freepage moving.
*/
if (!isolated_page) {
- nr_pages = move_freepages_block(zone, page, migratetype);
+ nr_pages = move_freepages_block(zone, page, migratetype, NULL);
__mod_zone_freepage_state(zone, nr_pages, migratetype);
}
set_pageblock_migratetype(page, migratetype);
diff --git a/mm/swap_slots.c b/mm/swap_slots.c
index aa1c415..58f6c78 100644
--- a/mm/swap_slots.c
+++ b/mm/swap_slots.c
@@ -31,6 +31,7 @@
#include <linux/cpumask.h>
#include <linux/vmalloc.h>
#include <linux/mutex.h>
+#include <linux/mm.h>
#ifdef CONFIG_SWAP
@@ -119,16 +120,18 @@ static int alloc_swap_slot_cache(unsigned int cpu)
/*
* Do allocation outside swap_slots_cache_mutex
- * as vzalloc could trigger reclaim and get_swap_page,
+ * as kvzalloc could trigger reclaim and get_swap_page,
* which can lock swap_slots_cache_mutex.
*/
- slots = vzalloc(sizeof(swp_entry_t) * SWAP_SLOTS_CACHE_SIZE);
+ slots = kvzalloc(sizeof(swp_entry_t) * SWAP_SLOTS_CACHE_SIZE,
+ GFP_KERNEL);
if (!slots)
return -ENOMEM;
- slots_ret = vzalloc(sizeof(swp_entry_t) * SWAP_SLOTS_CACHE_SIZE);
+ slots_ret = kvzalloc(sizeof(swp_entry_t) * SWAP_SLOTS_CACHE_SIZE,
+ GFP_KERNEL);
if (!slots_ret) {
- vfree(slots);
+ kvfree(slots);
return -ENOMEM;
}
@@ -152,9 +155,9 @@ static int alloc_swap_slot_cache(unsigned int cpu)
out:
mutex_unlock(&swap_slots_cache_mutex);
if (slots)
- vfree(slots);
+ kvfree(slots);
if (slots_ret)
- vfree(slots_ret);
+ kvfree(slots_ret);
return 0;
}
@@ -171,7 +174,7 @@ static void drain_slots_cache_cpu(unsigned int cpu, unsigned int type,
cache->cur = 0;
cache->nr = 0;
if (free_slots && cache->slots) {
- vfree(cache->slots);
+ kvfree(cache->slots);
cache->slots = NULL;
}
mutex_unlock(&cache->alloc_lock);
@@ -186,7 +189,7 @@ static void drain_slots_cache_cpu(unsigned int cpu, unsigned int type,
}
spin_unlock_irq(&cache->free_lock);
if (slots)
- vfree(slots);
+ kvfree(slots);
}
}
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 7bfb9bd..539b888 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -523,7 +523,7 @@ int init_swap_address_space(unsigned int type, unsigned long nr_pages)
unsigned int i, nr;
nr = DIV_ROUND_UP(nr_pages, SWAP_ADDRESS_SPACE_PAGES);
- spaces = vzalloc(sizeof(struct address_space) * nr);
+ spaces = kvzalloc(sizeof(struct address_space) * nr, GFP_KERNEL);
if (!spaces)
return -ENOMEM;
for (i = 0; i < nr; i++) {
diff --git a/mm/swapfile.c b/mm/swapfile.c
index b86b2aca..4f6cba1 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2270,8 +2270,8 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
free_percpu(p->percpu_cluster);
p->percpu_cluster = NULL;
vfree(swap_map);
- vfree(cluster_info);
- vfree(frontswap_map);
+ kvfree(cluster_info);
+ kvfree(frontswap_map);
/* Destroy swap account information */
swap_cgroup_swapoff(p->type);
exit_swap_address_space(p->type);
@@ -2794,7 +2794,8 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
p->cluster_next = 1 + (prandom_u32() % p->highest_bit);
nr_cluster = DIV_ROUND_UP(maxpages, SWAPFILE_CLUSTER);
- cluster_info = vzalloc(nr_cluster * sizeof(*cluster_info));
+ cluster_info = kvzalloc(nr_cluster * sizeof(*cluster_info),
+ GFP_KERNEL);
if (!cluster_info) {
error = -ENOMEM;
goto bad_swap;
@@ -2827,7 +2828,8 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
}
/* frontswap enabled? set up bit-per-page map for frontswap */
if (IS_ENABLED(CONFIG_FRONTSWAP))
- frontswap_map = vzalloc(BITS_TO_LONGS(maxpages) * sizeof(long));
+ frontswap_map = kvzalloc(BITS_TO_LONGS(maxpages) * sizeof(long),
+ GFP_KERNEL);
if (p->bdev &&(swap_flags & SWAP_FLAG_DISCARD) && swap_discardable(p)) {
/*
diff --git a/mm/util.c b/mm/util.c
index 656dc5e..718154d 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -329,6 +329,63 @@ unsigned long vm_mmap(struct file *file, unsigned long addr,
}
EXPORT_SYMBOL(vm_mmap);
+/**
+ * kvmalloc_node - attempt to allocate physically contiguous memory, but upon
+ * failure, fall back to non-contiguous (vmalloc) allocation.
+ * @size: size of the request.
+ * @flags: gfp mask for the allocation - must be compatible (superset) with GFP_KERNEL.
+ * @node: numa node to allocate from
+ *
+ * Uses kmalloc to get the memory but if the allocation fails then falls back
+ * to the vmalloc allocator. Use kvfree for freeing the memory.
+ *
+ * Reclaim modifiers - __GFP_NORETRY and __GFP_NOFAIL are not supported. __GFP_REPEAT
+ * is supported only for large (>32kB) allocations, and it should be used only if
+ * kmalloc is preferable to the vmalloc fallback, due to visible performance drawbacks.
+ *
+ * Any use of gfp flags outside of GFP_KERNEL should be consulted with mm people.
+ */
+void *kvmalloc_node(size_t size, gfp_t flags, int node)
+{
+ gfp_t kmalloc_flags = flags;
+ void *ret;
+
+ /*
+ * vmalloc uses GFP_KERNEL for some internal allocations (e.g page tables)
+ * so the given set of flags has to be compatible.
+ */
+ WARN_ON_ONCE((flags & GFP_KERNEL) != GFP_KERNEL);
+
+ /*
+ * Make sure that larger requests are not too disruptive - no OOM
+ * killer and no allocation failure warnings as we have a fallback
+ */
+ if (size > PAGE_SIZE) {
+ kmalloc_flags |= __GFP_NOWARN;
+
+ /*
+ * We have to override __GFP_REPEAT by __GFP_NORETRY for !costly
+ * requests because there is no other way to tell the allocator
+ * that we want to fail rather than retry endlessly.
+ */
+ if (!(kmalloc_flags & __GFP_REPEAT) ||
+ (size <= PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER))
+ kmalloc_flags |= __GFP_NORETRY;
+ }
+
+ ret = kmalloc_node(size, kmalloc_flags, node);
+
+ /*
+ * It doesn't really make sense to fallback to vmalloc for sub page
+ * requests
+ */
+ if (ret || size <= PAGE_SIZE)
+ return ret;
+
+ return __vmalloc_node_flags(size, node, flags);
+}
+EXPORT_SYMBOL(kvmalloc_node);
+
void kvfree(const void *addr)
{
if (is_vmalloc_addr(addr))
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index b52aeed..1dda6d8 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1649,16 +1649,13 @@ void *vmap(struct page **pages, unsigned int count,
}
EXPORT_SYMBOL(vmap);
-static void *__vmalloc_node(unsigned long size, unsigned long align,
- gfp_t gfp_mask, pgprot_t prot,
- int node, const void *caller);
static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
pgprot_t prot, int node)
{
struct page **pages;
unsigned int nr_pages, array_size, i;
const gfp_t nested_gfp = (gfp_mask & GFP_RECLAIM_MASK) | __GFP_ZERO;
- const gfp_t alloc_mask = gfp_mask | __GFP_NOWARN;
+ const gfp_t alloc_mask = gfp_mask | __GFP_HIGHMEM | __GFP_NOWARN;
nr_pages = get_vm_area_size(area) >> PAGE_SHIFT;
array_size = (nr_pages * sizeof(struct page *));
@@ -1786,8 +1783,15 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align,
* Allocate enough pages to cover @size from the page level
* allocator with @gfp_mask flags. Map them into contiguous
* kernel virtual space, using a pagetable protection of @prot.
+ *
+ * Reclaim modifiers in @gfp_mask - __GFP_NORETRY, __GFP_REPEAT
+ * and __GFP_NOFAIL are not supported
+ *
+ * Any use of gfp flags outside of GFP_KERNEL should be consulted
+ * with mm people.
+ *
*/
-static void *__vmalloc_node(unsigned long size, unsigned long align,
+void *__vmalloc_node(unsigned long size, unsigned long align,
gfp_t gfp_mask, pgprot_t prot,
int node, const void *caller)
{
@@ -1802,13 +1806,6 @@ void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
}
EXPORT_SYMBOL(__vmalloc);
-static inline void *__vmalloc_node_flags(unsigned long size,
- int node, gfp_t flags)
-{
- return __vmalloc_node(size, 1, flags, PAGE_KERNEL,
- node, __builtin_return_address(0));
-}
-
/**
* vmalloc - allocate virtually contiguous memory
* @size: allocation size
@@ -1821,7 +1818,7 @@ static inline void *__vmalloc_node_flags(unsigned long size,
void *vmalloc(unsigned long size)
{
return __vmalloc_node_flags(size, NUMA_NO_NODE,
- GFP_KERNEL | __GFP_HIGHMEM);
+ GFP_KERNEL);
}
EXPORT_SYMBOL(vmalloc);
@@ -1838,7 +1835,7 @@ EXPORT_SYMBOL(vmalloc);
void *vzalloc(unsigned long size)
{
return __vmalloc_node_flags(size, NUMA_NO_NODE,
- GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO);
+ GFP_KERNEL | __GFP_ZERO);
}
EXPORT_SYMBOL(vzalloc);
@@ -1855,7 +1852,7 @@ void *vmalloc_user(unsigned long size)
void *ret;
ret = __vmalloc_node(size, SHMLBA,
- GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
+ GFP_KERNEL | __GFP_ZERO,
PAGE_KERNEL, NUMA_NO_NODE,
__builtin_return_address(0));
if (ret) {
@@ -1879,7 +1876,7 @@ EXPORT_SYMBOL(vmalloc_user);
*/
void *vmalloc_node(unsigned long size, int node)
{
- return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
+ return __vmalloc_node(size, 1, GFP_KERNEL, PAGE_KERNEL,
node, __builtin_return_address(0));
}
EXPORT_SYMBOL(vmalloc_node);
@@ -1899,7 +1896,7 @@ EXPORT_SYMBOL(vmalloc_node);
void *vzalloc_node(unsigned long size, int node)
{
return __vmalloc_node_flags(size, node,
- GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO);
+ GFP_KERNEL | __GFP_ZERO);
}
EXPORT_SYMBOL(vzalloc_node);
@@ -1921,7 +1918,7 @@ EXPORT_SYMBOL(vzalloc_node);
void *vmalloc_exec(unsigned long size)
{
- return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC,
+ return __vmalloc_node(size, 1, GFP_KERNEL, PAGE_KERNEL_EXEC,
NUMA_NO_NODE, __builtin_return_address(0));
}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 4e7ed65..2f45c05 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -3036,6 +3036,7 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *memcg,
struct zonelist *zonelist;
unsigned long nr_reclaimed;
int nid;
+ unsigned int noreclaim_flag;
struct scan_control sc = {
.nr_to_reclaim = max(nr_pages, SWAP_CLUSTER_MAX),
.gfp_mask = (current_gfp_context(gfp_mask) & GFP_RECLAIM_MASK) |
@@ -3062,9 +3063,9 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *memcg,
sc.gfp_mask,
sc.reclaim_idx);
- current->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
nr_reclaimed = do_try_to_free_pages(zonelist, &sc);
- current->flags &= ~PF_MEMALLOC;
+ memalloc_noreclaim_restore(noreclaim_flag);
trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed);
@@ -3589,8 +3590,9 @@ unsigned long shrink_all_memory(unsigned long nr_to_reclaim)
struct zonelist *zonelist = node_zonelist(numa_node_id(), sc.gfp_mask);
struct task_struct *p = current;
unsigned long nr_reclaimed;
+ unsigned int noreclaim_flag;
- p->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
lockdep_set_current_reclaim_state(sc.gfp_mask);
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
@@ -3599,7 +3601,7 @@ unsigned long shrink_all_memory(unsigned long nr_to_reclaim)
p->reclaim_state = NULL;
lockdep_clear_current_reclaim_state();
- p->flags &= ~PF_MEMALLOC;
+ memalloc_noreclaim_restore(noreclaim_flag);
return nr_reclaimed;
}
@@ -3764,6 +3766,7 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
struct task_struct *p = current;
struct reclaim_state reclaim_state;
int classzone_idx = gfp_zone(gfp_mask);
+ unsigned int noreclaim_flag;
struct scan_control sc = {
.nr_to_reclaim = max(nr_pages, SWAP_CLUSTER_MAX),
.gfp_mask = (gfp_mask = current_gfp_context(gfp_mask)),
@@ -3781,7 +3784,8 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
* and we also need to be able to write out pages for RECLAIM_WRITE
* and RECLAIM_UNMAP.
*/
- p->flags |= PF_MEMALLOC | PF_SWAPWRITE;
+ noreclaim_flag = memalloc_noreclaim_save();
+ p->flags |= PF_SWAPWRITE;
lockdep_set_current_reclaim_state(gfp_mask);
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
@@ -3797,7 +3801,8 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
}
p->reclaim_state = NULL;
- current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE);
+ current->flags &= ~PF_SWAPWRITE;
+ memalloc_noreclaim_restore(noreclaim_flag);
lockdep_clear_current_reclaim_state();
return sc.nr_reclaimed >= nr_pages;
}
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 9ee5787..953b672 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -626,11 +626,18 @@ static netdev_features_t vlan_dev_fix_features(struct net_device *dev,
{
struct net_device *real_dev = vlan_dev_priv(dev)->real_dev;
netdev_features_t old_features = features;
+ netdev_features_t lower_features;
- features = netdev_intersect_features(features, real_dev->vlan_features);
- features |= NETIF_F_RXCSUM;
- features = netdev_intersect_features(features, real_dev->features);
+ lower_features = netdev_intersect_features((real_dev->vlan_features |
+ NETIF_F_RXCSUM),
+ real_dev->features);
+ /* Add HW_CSUM setting to preserve user ability to control
+ * checksum offload on the vlan device.
+ */
+ if (lower_features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))
+ lower_features |= NETIF_F_HW_CSUM;
+ features = netdev_intersect_features(features, lower_features);
features |= old_features & (NETIF_F_SOFT_FEATURES | NETIF_F_GSO_SOFTWARE);
features |= NETIF_F_LLTX;
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index a572db71..c5ce774 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -133,6 +133,8 @@ static inline size_t br_port_info_size(void)
+ nla_total_size(1) /* IFLA_BRPORT_MCAST_TO_UCAST */
+ nla_total_size(1) /* IFLA_BRPORT_LEARNING */
+ nla_total_size(1) /* IFLA_BRPORT_UNICAST_FLOOD */
+ + nla_total_size(1) /* IFLA_BRPORT_MCAST_FLOOD */
+ + nla_total_size(1) /* IFLA_BRPORT_BCAST_FLOOD */
+ nla_total_size(1) /* IFLA_BRPORT_PROXYARP */
+ nla_total_size(1) /* IFLA_BRPORT_PROXYARP_WIFI */
+ nla_total_size(1) /* IFLA_BRPORT_VLAN_TUNNEL */
@@ -633,6 +635,8 @@ static const struct nla_policy br_port_policy[IFLA_BRPORT_MAX + 1] = {
[IFLA_BRPORT_PROXYARP_WIFI] = { .type = NLA_U8 },
[IFLA_BRPORT_MULTICAST_ROUTER] = { .type = NLA_U8 },
[IFLA_BRPORT_MCAST_TO_UCAST] = { .type = NLA_U8 },
+ [IFLA_BRPORT_MCAST_FLOOD] = { .type = NLA_U8 },
+ [IFLA_BRPORT_BCAST_FLOOD] = { .type = NLA_U8 },
};
/* Change the state of the port and notify spanning tree */
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 1085338..4eb773c 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -187,7 +187,7 @@ void *ceph_kvmalloc(size_t size, gfp_t flags)
return ptr;
}
- return __vmalloc(size, flags | __GFP_HIGHMEM, PAGE_KERNEL);
+ return __vmalloc(size, flags, PAGE_KERNEL);
}
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index f76bb33..5766a6c 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -1386,8 +1386,9 @@ static void prepare_write_keepalive(struct ceph_connection *con)
dout("prepare_write_keepalive %p\n", con);
con_out_kvec_reset(con);
if (con->peer_features & CEPH_FEATURE_MSGR_KEEPALIVE2) {
- struct timespec now = CURRENT_TIME;
+ struct timespec now;
+ ktime_get_real_ts(&now);
con_out_kvec_add(con, sizeof(tag_keepalive2), &tag_keepalive2);
ceph_encode_timespec(&con->out_temp_keepalive2, &now);
con_out_kvec_add(con, sizeof(con->out_temp_keepalive2),
@@ -3176,8 +3177,9 @@ bool ceph_con_keepalive_expired(struct ceph_connection *con,
{
if (interval > 0 &&
(con->peer_features & CEPH_FEATURE_MSGR_KEEPALIVE2)) {
- struct timespec now = CURRENT_TIME;
+ struct timespec now;
struct timespec ts;
+ ktime_get_real_ts(&now);
jiffies_to_timespec(interval, &ts);
ts = timespec_add(con->last_keepalive_ack, ts);
return timespec_compare(&now, &ts) >= 0;
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index e15ea9e..242d7c0 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -3574,7 +3574,7 @@ ceph_osdc_watch(struct ceph_osd_client *osdc,
ceph_oid_copy(&lreq->t.base_oid, oid);
ceph_oloc_copy(&lreq->t.base_oloc, oloc);
lreq->t.flags = CEPH_OSD_FLAG_WRITE;
- lreq->mtime = CURRENT_TIME;
+ ktime_get_real_ts(&lreq->mtime);
lreq->reg_req = alloc_linger_request(lreq);
if (!lreq->reg_req) {
@@ -3632,7 +3632,7 @@ int ceph_osdc_unwatch(struct ceph_osd_client *osdc,
ceph_oid_copy(&req->r_base_oid, &lreq->t.base_oid);
ceph_oloc_copy(&req->r_base_oloc, &lreq->t.base_oloc);
req->r_flags = CEPH_OSD_FLAG_WRITE;
- req->r_mtime = CURRENT_TIME;
+ ktime_get_real_ts(&req->r_mtime);
osd_req_op_watch_init(req, 0, lreq->linger_id,
CEPH_OSD_WATCH_OP_UNWATCH);
diff --git a/net/core/dev.c b/net/core/dev.c
index d07aa5f..96cf83d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -81,6 +81,7 @@
#include <linux/hash.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/sched/mm.h>
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/mm.h>
@@ -4235,7 +4236,7 @@ static int __netif_receive_skb(struct sk_buff *skb)
int ret;
if (sk_memalloc_socks() && skb_pfmemalloc(skb)) {
- unsigned long pflags = current->flags;
+ unsigned int noreclaim_flag;
/*
* PFMEMALLOC skbs are special, they should
@@ -4246,9 +4247,9 @@ static int __netif_receive_skb(struct sk_buff *skb)
* Use PF_MEMALLOC as this saves us from propagating the allocation
* context down to all allocation sites.
*/
- current->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
ret = __netif_receive_skb_core(skb, true);
- current_restore_flags(pflags, PF_MEMALLOC);
+ memalloc_noreclaim_restore(noreclaim_flag);
} else
ret = __netif_receive_skb_core(skb, false);
@@ -7264,12 +7265,10 @@ static int netif_alloc_rx_queues(struct net_device *dev)
BUG_ON(count < 1);
- rx = kzalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
- if (!rx) {
- rx = vzalloc(sz);
- if (!rx)
- return -ENOMEM;
- }
+ rx = kvzalloc(sz, GFP_KERNEL | __GFP_REPEAT);
+ if (!rx)
+ return -ENOMEM;
+
dev->_rx = rx;
for (i = 0; i < count; i++)
@@ -7306,12 +7305,10 @@ static int netif_alloc_netdev_queues(struct net_device *dev)
if (count < 1 || count > 0xffff)
return -EINVAL;
- tx = kzalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
- if (!tx) {
- tx = vzalloc(sz);
- if (!tx)
- return -ENOMEM;
- }
+ tx = kvzalloc(sz, GFP_KERNEL | __GFP_REPEAT);
+ if (!tx)
+ return -ENOMEM;
+
dev->_tx = tx;
netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL);
@@ -7845,9 +7842,7 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
/* ensure 32-byte alignment of whole construct */
alloc_size += NETDEV_ALIGN - 1;
- p = kzalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
- if (!p)
- p = vzalloc(alloc_size);
+ p = kvzalloc(alloc_size, GFP_KERNEL | __GFP_REPEAT);
if (!p)
return NULL;
diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c
index 6bd2f8f..ae35cce 100644
--- a/net/core/secure_seq.c
+++ b/net/core/secure_seq.c
@@ -24,9 +24,13 @@ static siphash_key_t ts_secret __read_mostly;
static __always_inline void net_secret_init(void)
{
- net_get_random_once(&ts_secret, sizeof(ts_secret));
net_get_random_once(&net_secret, sizeof(net_secret));
}
+
+static __always_inline void ts_secret_init(void)
+{
+ net_get_random_once(&ts_secret, sizeof(ts_secret));
+}
#endif
#ifdef CONFIG_INET
@@ -47,7 +51,7 @@ static u32 seq_scale(u32 seq)
#endif
#if IS_ENABLED(CONFIG_IPV6)
-static u32 secure_tcpv6_ts_off(const __be32 *saddr, const __be32 *daddr)
+u32 secure_tcpv6_ts_off(const __be32 *saddr, const __be32 *daddr)
{
const struct {
struct in6_addr saddr;
@@ -60,12 +64,14 @@ static u32 secure_tcpv6_ts_off(const __be32 *saddr, const __be32 *daddr)
if (sysctl_tcp_timestamps != 1)
return 0;
+ ts_secret_init();
return siphash(&combined, offsetofend(typeof(combined), daddr),
&ts_secret);
}
+EXPORT_SYMBOL(secure_tcpv6_ts_off);
-u32 secure_tcpv6_seq_and_tsoff(const __be32 *saddr, const __be32 *daddr,
- __be16 sport, __be16 dport, u32 *tsoff)
+u32 secure_tcpv6_seq(const __be32 *saddr, const __be32 *daddr,
+ __be16 sport, __be16 dport)
{
const struct {
struct in6_addr saddr;
@@ -78,14 +84,14 @@ u32 secure_tcpv6_seq_and_tsoff(const __be32 *saddr, const __be32 *daddr,
.sport = sport,
.dport = dport
};
- u64 hash;
+ u32 hash;
+
net_secret_init();
hash = siphash(&combined, offsetofend(typeof(combined), dport),
&net_secret);
- *tsoff = secure_tcpv6_ts_off(saddr, daddr);
return seq_scale(hash);
}
-EXPORT_SYMBOL(secure_tcpv6_seq_and_tsoff);
+EXPORT_SYMBOL(secure_tcpv6_seq);
u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
__be16 dport)
@@ -107,11 +113,12 @@ EXPORT_SYMBOL(secure_ipv6_port_ephemeral);
#endif
#ifdef CONFIG_INET
-static u32 secure_tcp_ts_off(__be32 saddr, __be32 daddr)
+u32 secure_tcp_ts_off(__be32 saddr, __be32 daddr)
{
if (sysctl_tcp_timestamps != 1)
return 0;
+ ts_secret_init();
return siphash_2u32((__force u32)saddr, (__force u32)daddr,
&ts_secret);
}
@@ -121,15 +128,15 @@ static u32 secure_tcp_ts_off(__be32 saddr, __be32 daddr)
* it would be easy enough to have the former function use siphash_4u32, passing
* the arguments as separate u32.
*/
-u32 secure_tcp_seq_and_tsoff(__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport, u32 *tsoff)
+u32 secure_tcp_seq(__be32 saddr, __be32 daddr,
+ __be16 sport, __be16 dport)
{
- u64 hash;
+ u32 hash;
+
net_secret_init();
hash = siphash_3u32((__force u32)saddr, (__force u32)daddr,
(__force u32)sport << 16 | (__force u32)dport,
&net_secret);
- *tsoff = secure_tcp_ts_off(saddr, daddr);
return seq_scale(hash);
}
diff --git a/net/core/sock.c b/net/core/sock.c
index b5baeb9..79c6aee 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -102,6 +102,7 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/sched.h>
+#include <linux/sched/mm.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/sockios.h>
@@ -372,14 +373,14 @@ EXPORT_SYMBOL_GPL(sk_clear_memalloc);
int __sk_backlog_rcv(struct sock *sk, struct sk_buff *skb)
{
int ret;
- unsigned long pflags = current->flags;
+ unsigned int noreclaim_flag;
/* these should have been dropped before queueing */
BUG_ON(!sock_flag(sk, SOCK_MEMALLOC));
- current->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
ret = sk->sk_backlog_rcv(sk, skb);
- current_restore_flags(pflags, PF_MEMALLOC);
+ memalloc_noreclaim_restore(noreclaim_flag);
return ret;
}
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 9afa2a5..405483a 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -2361,7 +2361,8 @@ MODULE_AUTHOR("Linux DECnet Project Team");
MODULE_LICENSE("GPL");
MODULE_ALIAS_NETPROTO(PF_DECnet);
-static char banner[] __initdata = KERN_INFO "NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team\n";
+static const char banner[] __initconst = KERN_INFO
+"NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team\n";
static int __init decnet_init(void)
{
diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c
index 482730c..eeb5fc5 100644
--- a/net/decnet/dn_neigh.c
+++ b/net/decnet/dn_neigh.c
@@ -110,7 +110,7 @@ struct neigh_table dn_neigh_table = {
static int dn_neigh_construct(struct neighbour *neigh)
{
struct net_device *dev = neigh->dev;
- struct dn_neigh *dn = (struct dn_neigh *)neigh;
+ struct dn_neigh *dn = container_of(neigh, struct dn_neigh, n);
struct dn_dev *dn_db;
struct neigh_parms *parms;
@@ -339,7 +339,7 @@ int dn_to_neigh_output(struct net *net, struct sock *sk, struct sk_buff *skb)
struct dst_entry *dst = skb_dst(skb);
struct dn_route *rt = (struct dn_route *) dst;
struct neighbour *neigh = rt->n;
- struct dn_neigh *dn = (struct dn_neigh *)neigh;
+ struct dn_neigh *dn = container_of(neigh, struct dn_neigh, n);
struct dn_dev *dn_db;
bool use_long;
@@ -391,7 +391,7 @@ int dn_neigh_router_hello(struct net *net, struct sock *sk, struct sk_buff *skb)
neigh = __neigh_lookup(&dn_neigh_table, &src, skb->dev, 1);
- dn = (struct dn_neigh *)neigh;
+ dn = container_of(neigh, struct dn_neigh, n);
if (neigh) {
write_lock(&neigh->lock);
@@ -451,7 +451,7 @@ int dn_neigh_endnode_hello(struct net *net, struct sock *sk, struct sk_buff *skb
neigh = __neigh_lookup(&dn_neigh_table, &src, skb->dev, 1);
- dn = (struct dn_neigh *)neigh;
+ dn = container_of(neigh, struct dn_neigh, n);
if (neigh) {
write_lock(&neigh->lock);
@@ -510,7 +510,7 @@ static void neigh_elist_cb(struct neighbour *neigh, void *_info)
if (neigh->dev != s->dev)
return;
- dn = (struct dn_neigh *) neigh;
+ dn = container_of(neigh, struct dn_neigh, n);
if (!(dn->flags & (DN_NDFLAG_R1|DN_NDFLAG_R2)))
return;
@@ -549,7 +549,7 @@ int dn_neigh_elist(struct net_device *dev, unsigned char *ptr, int n)
static inline void dn_neigh_format_entry(struct seq_file *seq,
struct neighbour *n)
{
- struct dn_neigh *dn = (struct dn_neigh *) n;
+ struct dn_neigh *dn = container_of(n, struct dn_neigh, n);
char buf[DN_ASCBUF_LEN];
read_lock(&n->lock);
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 5e313c1..1054d33 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -794,6 +794,8 @@ struct sock *inet_csk_clone_lock(const struct sock *sk,
/* listeners have SOCK_RCU_FREE, not the children */
sock_reset_flag(newsk, SOCK_RCU_FREE);
+ inet_sk(newsk)->mc_list = NULL;
+
newsk->sk_mark = inet_rsk(req)->ir_mark;
atomic64_set(&newsk->sk_cookie,
atomic64_read(&inet_rsk(req)->ir_cookie));
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 8bea742..e9a59d2 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -678,11 +678,7 @@ int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo)
/* no more locks than number of hash buckets */
nblocks = min(nblocks, hashinfo->ehash_mask + 1);
- hashinfo->ehash_locks = kmalloc_array(nblocks, locksz,
- GFP_KERNEL | __GFP_NOWARN);
- if (!hashinfo->ehash_locks)
- hashinfo->ehash_locks = vmalloc(nblocks * locksz);
-
+ hashinfo->ehash_locks = kvmalloc_array(nblocks, locksz, GFP_KERNEL);
if (!hashinfo->ehash_locks)
return -ENOMEM;
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 4097741..4ec9aff 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -546,12 +546,13 @@ static int vti_fill_info(struct sk_buff *skb, const struct net_device *dev)
struct ip_tunnel *t = netdev_priv(dev);
struct ip_tunnel_parm *p = &t->parms;
- nla_put_u32(skb, IFLA_VTI_LINK, p->link);
- nla_put_be32(skb, IFLA_VTI_IKEY, p->i_key);
- nla_put_be32(skb, IFLA_VTI_OKEY, p->o_key);
- nla_put_in_addr(skb, IFLA_VTI_LOCAL, p->iph.saddr);
- nla_put_in_addr(skb, IFLA_VTI_REMOTE, p->iph.daddr);
- nla_put_u32(skb, IFLA_VTI_FWMARK, t->fwmark);
+ if (nla_put_u32(skb, IFLA_VTI_LINK, p->link) ||
+ nla_put_be32(skb, IFLA_VTI_IKEY, p->i_key) ||
+ nla_put_be32(skb, IFLA_VTI_OKEY, p->o_key) ||
+ nla_put_in_addr(skb, IFLA_VTI_LOCAL, p->iph.saddr) ||
+ nla_put_in_addr(skb, IFLA_VTI_REMOTE, p->iph.daddr) ||
+ nla_put_u32(skb, IFLA_VTI_FWMARK, t->fwmark))
+ return -EMSGSIZE;
return 0;
}
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 496b97e..0257d96 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -16,6 +16,7 @@
#include <linux/siphash.h>
#include <linux/kernel.h>
#include <linux/export.h>
+#include <net/secure_seq.h>
#include <net/tcp.h>
#include <net/route.h>
@@ -203,7 +204,7 @@ EXPORT_SYMBOL_GPL(__cookie_v4_check);
struct sock *tcp_get_cookie_sock(struct sock *sk, struct sk_buff *skb,
struct request_sock *req,
- struct dst_entry *dst)
+ struct dst_entry *dst, u32 tsoff)
{
struct inet_connection_sock *icsk = inet_csk(sk);
struct sock *child;
@@ -213,6 +214,7 @@ struct sock *tcp_get_cookie_sock(struct sock *sk, struct sk_buff *skb,
NULL, &own_req);
if (child) {
atomic_set(&req->rsk_refcnt, 1);
+ tcp_sk(child)->tsoffset = tsoff;
sock_rps_save_rxhash(child, skb);
inet_csk_reqsk_queue_add(sk, req, child);
} else {
@@ -292,6 +294,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb)
struct rtable *rt;
__u8 rcv_wscale;
struct flowi4 fl4;
+ u32 tsoff = 0;
if (!sock_net(sk)->ipv4.sysctl_tcp_syncookies || !th->ack || th->rst)
goto out;
@@ -311,6 +314,11 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb)
memset(&tcp_opt, 0, sizeof(tcp_opt));
tcp_parse_options(skb, &tcp_opt, 0, NULL);
+ if (tcp_opt.saw_tstamp && tcp_opt.rcv_tsecr) {
+ tsoff = secure_tcp_ts_off(ip_hdr(skb)->daddr, ip_hdr(skb)->saddr);
+ tcp_opt.rcv_tsecr -= tsoff;
+ }
+
if (!cookie_timestamp_decode(&tcp_opt))
goto out;
@@ -381,7 +389,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb)
ireq->rcv_wscale = rcv_wscale;
ireq->ecn_ok = cookie_ecn_ok(&tcp_opt, sock_net(sk), &rt->dst);
- ret = tcp_get_cookie_sock(sk, skb, req, &rt->dst);
+ ret = tcp_get_cookie_sock(sk, skb, req, &rt->dst, tsoff);
/* ip_queue_xmit() depends on our flow being setup
* Normal sockets get it right from inet_csk_route_child_sock()
*/
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 9739962..5a3ad09 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -85,7 +85,6 @@ int sysctl_tcp_dsack __read_mostly = 1;
int sysctl_tcp_app_win __read_mostly = 31;
int sysctl_tcp_adv_win_scale __read_mostly = 1;
EXPORT_SYMBOL(sysctl_tcp_adv_win_scale);
-EXPORT_SYMBOL(sysctl_tcp_timestamps);
/* rfc5961 challenge ack rate limiting */
int sysctl_tcp_challenge_ack_limit = 1000;
@@ -6347,8 +6346,8 @@ int tcp_conn_request(struct request_sock_ops *rsk_ops,
if (security_inet_conn_request(sk, skb, req))
goto drop_and_free;
- if (isn && tmp_opt.tstamp_ok)
- af_ops->init_seq_tsoff(skb, &tcp_rsk(req)->ts_off);
+ if (tmp_opt.tstamp_ok)
+ tcp_rsk(req)->ts_off = af_ops->init_ts_off(skb);
if (!want_cookie && !isn) {
/* Kill the following clause, if you dislike this way. */
@@ -6368,7 +6367,7 @@ int tcp_conn_request(struct request_sock_ops *rsk_ops,
goto drop_and_release;
}
- isn = af_ops->init_seq_tsoff(skb, &tcp_rsk(req)->ts_off);
+ isn = af_ops->init_seq(skb);
}
if (!dst) {
dst = af_ops->route_req(sk, &fl, req);
@@ -6380,7 +6379,6 @@ int tcp_conn_request(struct request_sock_ops *rsk_ops,
if (want_cookie) {
isn = cookie_init_sequence(af_ops, sk, skb, &req->mss);
- tcp_rsk(req)->ts_off = 0;
req->cookie_ts = tmp_opt.tstamp_ok;
if (!tmp_opt.tstamp_ok)
inet_rsk(req)->ecn_ok = 0;
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index cbbafe5..3a51582 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -94,12 +94,18 @@ static int tcp_v4_md5_hash_hdr(char *md5_hash, const struct tcp_md5sig_key *key,
struct inet_hashinfo tcp_hashinfo;
EXPORT_SYMBOL(tcp_hashinfo);
-static u32 tcp_v4_init_seq_and_tsoff(const struct sk_buff *skb, u32 *tsoff)
+static u32 tcp_v4_init_seq(const struct sk_buff *skb)
{
- return secure_tcp_seq_and_tsoff(ip_hdr(skb)->daddr,
- ip_hdr(skb)->saddr,
- tcp_hdr(skb)->dest,
- tcp_hdr(skb)->source, tsoff);
+ return secure_tcp_seq(ip_hdr(skb)->daddr,
+ ip_hdr(skb)->saddr,
+ tcp_hdr(skb)->dest,
+ tcp_hdr(skb)->source);
+}
+
+static u32 tcp_v4_init_ts_off(const struct sk_buff *skb)
+{
+ return secure_tcp_ts_off(ip_hdr(skb)->daddr,
+ ip_hdr(skb)->saddr);
}
int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp)
@@ -145,7 +151,6 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
struct flowi4 *fl4;
struct rtable *rt;
int err;
- u32 seq;
struct ip_options_rcu *inet_opt;
struct inet_timewait_death_row *tcp_death_row = &sock_net(sk)->ipv4.tcp_death_row;
@@ -232,13 +237,13 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
rt = NULL;
if (likely(!tp->repair)) {
- seq = secure_tcp_seq_and_tsoff(inet->inet_saddr,
- inet->inet_daddr,
- inet->inet_sport,
- usin->sin_port,
- &tp->tsoffset);
if (!tp->write_seq)
- tp->write_seq = seq;
+ tp->write_seq = secure_tcp_seq(inet->inet_saddr,
+ inet->inet_daddr,
+ inet->inet_sport,
+ usin->sin_port);
+ tp->tsoffset = secure_tcp_ts_off(inet->inet_saddr,
+ inet->inet_daddr);
}
inet->inet_id = tp->write_seq ^ jiffies;
@@ -1239,7 +1244,8 @@ static const struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = {
.cookie_init_seq = cookie_v4_init_sequence,
#endif
.route_req = tcp_v4_route_req,
- .init_seq_tsoff = tcp_v4_init_seq_and_tsoff,
+ .init_seq = tcp_v4_init_seq,
+ .init_ts_off = tcp_v4_init_ts_off,
.send_synack = tcp_v4_send_synack,
};
diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c
index 9d0d4f3..653bbd6 100644
--- a/net/ipv4/tcp_metrics.c
+++ b/net/ipv4/tcp_metrics.c
@@ -1011,10 +1011,7 @@ static int __net_init tcp_net_metrics_init(struct net *net)
tcp_metrics_hash_log = order_base_2(slots);
size = sizeof(struct tcpm_hash_bucket) << tcp_metrics_hash_log;
- tcp_metrics_hash = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
- if (!tcp_metrics_hash)
- tcp_metrics_hash = vzalloc(size);
-
+ tcp_metrics_hash = kvzalloc(size, GFP_KERNEL);
if (!tcp_metrics_hash)
return -ENOMEM;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 60111a0..4858e19 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1514,6 +1514,7 @@ static void tcp_cwnd_application_limited(struct sock *sk)
static void tcp_cwnd_validate(struct sock *sk, bool is_cwnd_limited)
{
+ const struct tcp_congestion_ops *ca_ops = inet_csk(sk)->icsk_ca_ops;
struct tcp_sock *tp = tcp_sk(sk);
/* Track the maximum number of outstanding packets in each
@@ -1536,7 +1537,8 @@ static void tcp_cwnd_validate(struct sock *sk, bool is_cwnd_limited)
tp->snd_cwnd_used = tp->packets_out;
if (sysctl_tcp_slow_start_after_idle &&
- (s32)(tcp_time_stamp - tp->snd_cwnd_stamp) >= inet_csk(sk)->icsk_rto)
+ (s32)(tcp_time_stamp - tp->snd_cwnd_stamp) >= inet_csk(sk)->icsk_rto &&
+ !ca_ops->cong_control)
tcp_cwnd_application_limited(sk);
/* The following conditions together indicate the starvation
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 77a4bd5..8d297a7 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3548,6 +3548,7 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event,
*/
static struct notifier_block ipv6_dev_notf = {
.notifier_call = addrconf_notify,
+ .priority = ADDRCONF_NOTIFY_PRIORITY,
};
static void addrconf_type_change(struct net_device *dev, unsigned long event)
diff --git a/net/ipv6/ila/ila_xlat.c b/net/ipv6/ila/ila_xlat.c
index af8f52e..2fd5ca1 100644
--- a/net/ipv6/ila/ila_xlat.c
+++ b/net/ipv6/ila/ila_xlat.c
@@ -41,13 +41,7 @@ static int alloc_ila_locks(struct ila_net *ilan)
size = roundup_pow_of_two(nr_pcpus * LOCKS_PER_CPU);
if (sizeof(spinlock_t) != 0) {
-#ifdef CONFIG_NUMA
- if (size * sizeof(spinlock_t) > PAGE_SIZE)
- ilan->locks = vmalloc(size * sizeof(spinlock_t));
- else
-#endif
- ilan->locks = kmalloc_array(size, sizeof(spinlock_t),
- GFP_KERNEL);
+ ilan->locks = kvmalloc(size * sizeof(spinlock_t), GFP_KERNEL);
if (!ilan->locks)
return -ENOMEM;
for (i = 0; i < size; i++)
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 2f11366..dc61b0b 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -3709,7 +3709,10 @@ static int ip6_route_dev_notify(struct notifier_block *this,
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct net *net = dev_net(dev);
- if (event == NETDEV_REGISTER && (dev->flags & IFF_LOOPBACK)) {
+ if (!(dev->flags & IFF_LOOPBACK))
+ return NOTIFY_OK;
+
+ if (event == NETDEV_REGISTER) {
net->ipv6.ip6_null_entry->dst.dev = dev;
net->ipv6.ip6_null_entry->rt6i_idev = in6_dev_get(dev);
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -3718,6 +3721,12 @@ static int ip6_route_dev_notify(struct notifier_block *this,
net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
#endif
+ } else if (event == NETDEV_UNREGISTER) {
+ in6_dev_put(net->ipv6.ip6_null_entry->rt6i_idev);
+#ifdef CONFIG_IPV6_MULTIPLE_TABLES
+ in6_dev_put(net->ipv6.ip6_prohibit_entry->rt6i_idev);
+ in6_dev_put(net->ipv6.ip6_blk_hole_entry->rt6i_idev);
+#endif
}
return NOTIFY_OK;
@@ -4024,7 +4033,7 @@ static struct pernet_operations ip6_route_net_late_ops = {
static struct notifier_block ip6_route_dev_notifier = {
.notifier_call = ip6_route_dev_notify,
- .priority = 0,
+ .priority = ADDRCONF_NOTIFY_PRIORITY - 10,
};
void __init ip6_route_init_special_entries(void)
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 895ff65..5abc369 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -18,6 +18,7 @@
#include <linux/random.h>
#include <linux/siphash.h>
#include <linux/kernel.h>
+#include <net/secure_seq.h>
#include <net/ipv6.h>
#include <net/tcp.h>
@@ -143,6 +144,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
int mss;
struct dst_entry *dst;
__u8 rcv_wscale;
+ u32 tsoff = 0;
if (!sock_net(sk)->ipv4.sysctl_tcp_syncookies || !th->ack || th->rst)
goto out;
@@ -162,6 +164,12 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
memset(&tcp_opt, 0, sizeof(tcp_opt));
tcp_parse_options(skb, &tcp_opt, 0, NULL);
+ if (tcp_opt.saw_tstamp && tcp_opt.rcv_tsecr) {
+ tsoff = secure_tcpv6_ts_off(ipv6_hdr(skb)->daddr.s6_addr32,
+ ipv6_hdr(skb)->saddr.s6_addr32);
+ tcp_opt.rcv_tsecr -= tsoff;
+ }
+
if (!cookie_timestamp_decode(&tcp_opt))
goto out;
@@ -242,7 +250,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
ireq->rcv_wscale = rcv_wscale;
ireq->ecn_ok = cookie_ecn_ok(&tcp_opt, sock_net(sk), dst);
- ret = tcp_get_cookie_sock(sk, skb, req, dst);
+ ret = tcp_get_cookie_sock(sk, skb, req, dst, tsoff);
out:
return ret;
out_free:
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 8e42e8f..aeb9497 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -101,12 +101,18 @@ static void inet6_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb)
}
}
-static u32 tcp_v6_init_seq_and_tsoff(const struct sk_buff *skb, u32 *tsoff)
+static u32 tcp_v6_init_seq(const struct sk_buff *skb)
{
- return secure_tcpv6_seq_and_tsoff(ipv6_hdr(skb)->daddr.s6_addr32,
- ipv6_hdr(skb)->saddr.s6_addr32,
- tcp_hdr(skb)->dest,
- tcp_hdr(skb)->source, tsoff);
+ return secure_tcpv6_seq(ipv6_hdr(skb)->daddr.s6_addr32,
+ ipv6_hdr(skb)->saddr.s6_addr32,
+ tcp_hdr(skb)->dest,
+ tcp_hdr(skb)->source);
+}
+
+static u32 tcp_v6_init_ts_off(const struct sk_buff *skb)
+{
+ return secure_tcpv6_ts_off(ipv6_hdr(skb)->daddr.s6_addr32,
+ ipv6_hdr(skb)->saddr.s6_addr32);
}
static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
@@ -122,7 +128,6 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
struct flowi6 fl6;
struct dst_entry *dst;
int addr_type;
- u32 seq;
int err;
struct inet_timewait_death_row *tcp_death_row = &sock_net(sk)->ipv4.tcp_death_row;
@@ -282,13 +287,13 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
sk_set_txhash(sk);
if (likely(!tp->repair)) {
- seq = secure_tcpv6_seq_and_tsoff(np->saddr.s6_addr32,
- sk->sk_v6_daddr.s6_addr32,
- inet->inet_sport,
- inet->inet_dport,
- &tp->tsoffset);
if (!tp->write_seq)
- tp->write_seq = seq;
+ tp->write_seq = secure_tcpv6_seq(np->saddr.s6_addr32,
+ sk->sk_v6_daddr.s6_addr32,
+ inet->inet_sport,
+ inet->inet_dport);
+ tp->tsoffset = secure_tcpv6_ts_off(np->saddr.s6_addr32,
+ sk->sk_v6_daddr.s6_addr32);
}
if (tcp_fastopen_defer_connect(sk, &err))
@@ -749,7 +754,8 @@ static const struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
.cookie_init_seq = cookie_v6_init_sequence,
#endif
.route_req = tcp_v6_route_req,
- .init_seq_tsoff = tcp_v6_init_seq_and_tsoff,
+ .init_seq = tcp_v6_init_seq,
+ .init_ts_off = tcp_v6_init_ts_off,
.send_synack = tcp_v6_send_synack,
};
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 6db09fa..364d4e1 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -66,6 +66,8 @@ ieee80211_ibss_build_presp(struct ieee80211_sub_if_data *sdata,
2 + (IEEE80211_MAX_SUPP_RATES - 8) +
2 + sizeof(struct ieee80211_ht_cap) +
2 + sizeof(struct ieee80211_ht_operation) +
+ 2 + sizeof(struct ieee80211_vht_cap) +
+ 2 + sizeof(struct ieee80211_vht_operation) +
ifibss->ie_len;
presp = kzalloc(sizeof(*presp) + frame_len, GFP_KERNEL);
if (!presp)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 89dff56..0ea9712 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4382,6 +4382,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
return -EINVAL;
+ /* If a reconfig is happening, bail out */
+ if (local->in_reconfig)
+ return -EBUSY;
+
if (assoc) {
rcu_read_lock();
have_sta = sta_info_get(sdata, cbss->bssid);
diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c
index 088e2b4..257ec66 100644
--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -2005,10 +2005,7 @@ static int resize_platform_label_table(struct net *net, size_t limit)
unsigned index;
if (size) {
- labels = kzalloc(size, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY);
- if (!labels)
- labels = vzalloc(size);
-
+ labels = kvzalloc(size, GFP_KERNEL);
if (!labels)
goto nolabels;
}
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index f134d38..8876b7d 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -763,17 +763,8 @@ EXPORT_SYMBOL(xt_check_entry_offsets);
*/
unsigned int *xt_alloc_entry_offsets(unsigned int size)
{
- unsigned int *off;
+ return kvmalloc_array(size, sizeof(unsigned int), GFP_KERNEL | __GFP_ZERO);
- off = kcalloc(size, sizeof(unsigned int), GFP_KERNEL | __GFP_NOWARN);
-
- if (off)
- return off;
-
- if (size < (SIZE_MAX / sizeof(unsigned int)))
- off = vmalloc(size * sizeof(unsigned int));
-
- return off;
}
EXPORT_SYMBOL(xt_alloc_entry_offsets);
@@ -1007,8 +998,7 @@ struct xt_table_info *xt_alloc_table_info(unsigned int size)
if (sz <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER))
info = kmalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY);
if (!info) {
- info = __vmalloc(sz, GFP_KERNEL | __GFP_NOWARN |
- __GFP_NORETRY | __GFP_HIGHMEM,
+ info = __vmalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY,
PAGE_KERNEL);
if (!info)
return NULL;
@@ -1116,7 +1106,7 @@ static int xt_jumpstack_alloc(struct xt_table_info *i)
size = sizeof(void **) * nr_cpu_ids;
if (size > PAGE_SIZE)
- i->jumpstack = vzalloc(size);
+ i->jumpstack = kvzalloc(size, GFP_KERNEL);
else
i->jumpstack = kzalloc(size, GFP_KERNEL);
if (i->jumpstack == NULL)
@@ -1138,12 +1128,8 @@ static int xt_jumpstack_alloc(struct xt_table_info *i)
*/
size = sizeof(void *) * i->stacksize * 2u;
for_each_possible_cpu(cpu) {
- if (size > PAGE_SIZE)
- i->jumpstack[cpu] = vmalloc_node(size,
- cpu_to_node(cpu));
- else
- i->jumpstack[cpu] = kmalloc_node(size,
- GFP_KERNEL, cpu_to_node(cpu));
+ i->jumpstack[cpu] = kvmalloc_node(size, GFP_KERNEL,
+ cpu_to_node(cpu));
if (i->jumpstack[cpu] == NULL)
/*
* Freeing will be done later on by the callers. The
diff --git a/net/netfilter/xt_recent.c b/net/netfilter/xt_recent.c
index 37d581a..3f6c4fa 100644
--- a/net/netfilter/xt_recent.c
+++ b/net/netfilter/xt_recent.c
@@ -388,10 +388,7 @@ static int recent_mt_check(const struct xt_mtchk_param *par,
}
sz = sizeof(*t) + sizeof(t->iphash[0]) * ip_list_hash_size;
- if (sz <= PAGE_SIZE)
- t = kzalloc(sz, GFP_KERNEL);
- else
- t = vzalloc(sz);
+ t = kvzalloc(sz, GFP_KERNEL);
if (t == NULL) {
ret = -ENOMEM;
goto out;
diff --git a/net/sched/sch_choke.c b/net/sched/sch_choke.c
index d00f4c7c2..b30a2c7 100644
--- a/net/sched/sch_choke.c
+++ b/net/sched/sch_choke.c
@@ -376,10 +376,7 @@ static int choke_change(struct Qdisc *sch, struct nlattr *opt)
if (mask != q->tab_mask) {
struct sk_buff **ntab;
- ntab = kcalloc(mask + 1, sizeof(struct sk_buff *),
- GFP_KERNEL | __GFP_NOWARN);
- if (!ntab)
- ntab = vzalloc((mask + 1) * sizeof(struct sk_buff *));
+ ntab = kvmalloc_array((mask + 1), sizeof(struct sk_buff *), GFP_KERNEL | __GFP_ZERO);
if (!ntab)
return -ENOMEM;
diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c
index da4f67b..b488721 100644
--- a/net/sched/sch_fq.c
+++ b/net/sched/sch_fq.c
@@ -624,16 +624,6 @@ static void fq_rehash(struct fq_sched_data *q,
q->stat_gc_flows += fcnt;
}
-static void *fq_alloc_node(size_t sz, int node)
-{
- void *ptr;
-
- ptr = kmalloc_node(sz, GFP_KERNEL | __GFP_REPEAT | __GFP_NOWARN, node);
- if (!ptr)
- ptr = vmalloc_node(sz, node);
- return ptr;
-}
-
static void fq_free(void *addr)
{
kvfree(addr);
@@ -650,7 +640,7 @@ static int fq_resize(struct Qdisc *sch, u32 log)
return 0;
/* If XPS was setup, we can allocate memory on right NUMA node */
- array = fq_alloc_node(sizeof(struct rb_root) << log,
+ array = kvmalloc_node(sizeof(struct rb_root) << log, GFP_KERNEL | __GFP_REPEAT,
netdev_queue_numa_node_read(sch->dev_queue));
if (!array)
return -ENOMEM;
diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c
index 18bbb54..9201abc 100644
--- a/net/sched/sch_fq_codel.c
+++ b/net/sched/sch_fq_codel.c
@@ -446,27 +446,13 @@ static int fq_codel_change(struct Qdisc *sch, struct nlattr *opt)
return 0;
}
-static void *fq_codel_zalloc(size_t sz)
-{
- void *ptr = kzalloc(sz, GFP_KERNEL | __GFP_NOWARN);
-
- if (!ptr)
- ptr = vzalloc(sz);
- return ptr;
-}
-
-static void fq_codel_free(void *addr)
-{
- kvfree(addr);
-}
-
static void fq_codel_destroy(struct Qdisc *sch)
{
struct fq_codel_sched_data *q = qdisc_priv(sch);
tcf_destroy_chain(&q->filter_list);
- fq_codel_free(q->backlogs);
- fq_codel_free(q->flows);
+ kvfree(q->backlogs);
+ kvfree(q->flows);
}
static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt)
@@ -493,13 +479,13 @@ static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt)
}
if (!q->flows) {
- q->flows = fq_codel_zalloc(q->flows_cnt *
- sizeof(struct fq_codel_flow));
+ q->flows = kvzalloc(q->flows_cnt *
+ sizeof(struct fq_codel_flow), GFP_KERNEL);
if (!q->flows)
return -ENOMEM;
- q->backlogs = fq_codel_zalloc(q->flows_cnt * sizeof(u32));
+ q->backlogs = kvzalloc(q->flows_cnt * sizeof(u32), GFP_KERNEL);
if (!q->backlogs) {
- fq_codel_free(q->flows);
+ kvfree(q->flows);
return -ENOMEM;
}
for (i = 0; i < q->flows_cnt; i++) {
diff --git a/net/sched/sch_hhf.c b/net/sched/sch_hhf.c
index c19d346..51d3ba6 100644
--- a/net/sched/sch_hhf.c
+++ b/net/sched/sch_hhf.c
@@ -467,29 +467,14 @@ static void hhf_reset(struct Qdisc *sch)
rtnl_kfree_skbs(skb, skb);
}
-static void *hhf_zalloc(size_t sz)
-{
- void *ptr = kzalloc(sz, GFP_KERNEL | __GFP_NOWARN);
-
- if (!ptr)
- ptr = vzalloc(sz);
-
- return ptr;
-}
-
-static void hhf_free(void *addr)
-{
- kvfree(addr);
-}
-
static void hhf_destroy(struct Qdisc *sch)
{
int i;
struct hhf_sched_data *q = qdisc_priv(sch);
for (i = 0; i < HHF_ARRAYS_CNT; i++) {
- hhf_free(q->hhf_arrays[i]);
- hhf_free(q->hhf_valid_bits[i]);
+ kvfree(q->hhf_arrays[i]);
+ kvfree(q->hhf_valid_bits[i]);
}
for (i = 0; i < HH_FLOWS_CNT; i++) {
@@ -503,7 +488,7 @@ static void hhf_destroy(struct Qdisc *sch)
kfree(flow);
}
}
- hhf_free(q->hh_flows);
+ kvfree(q->hh_flows);
}
static const struct nla_policy hhf_policy[TCA_HHF_MAX + 1] = {
@@ -609,8 +594,8 @@ static int hhf_init(struct Qdisc *sch, struct nlattr *opt)
if (!q->hh_flows) {
/* Initialize heavy-hitter flow table. */
- q->hh_flows = hhf_zalloc(HH_FLOWS_CNT *
- sizeof(struct list_head));
+ q->hh_flows = kvzalloc(HH_FLOWS_CNT *
+ sizeof(struct list_head), GFP_KERNEL);
if (!q->hh_flows)
return -ENOMEM;
for (i = 0; i < HH_FLOWS_CNT; i++)
@@ -624,8 +609,8 @@ static int hhf_init(struct Qdisc *sch, struct nlattr *opt)
/* Initialize heavy-hitter filter arrays. */
for (i = 0; i < HHF_ARRAYS_CNT; i++) {
- q->hhf_arrays[i] = hhf_zalloc(HHF_ARRAYS_LEN *
- sizeof(u32));
+ q->hhf_arrays[i] = kvzalloc(HHF_ARRAYS_LEN *
+ sizeof(u32), GFP_KERNEL);
if (!q->hhf_arrays[i]) {
/* Note: hhf_destroy() will be called
* by our caller.
@@ -637,8 +622,8 @@ static int hhf_init(struct Qdisc *sch, struct nlattr *opt)
/* Initialize valid bits of heavy-hitter filter arrays. */
for (i = 0; i < HHF_ARRAYS_CNT; i++) {
- q->hhf_valid_bits[i] = hhf_zalloc(HHF_ARRAYS_LEN /
- BITS_PER_BYTE);
+ q->hhf_valid_bits[i] = kvzalloc(HHF_ARRAYS_LEN /
+ BITS_PER_BYTE, GFP_KERNEL);
if (!q->hhf_valid_bits[i]) {
/* Note: hhf_destroy() will be called
* by our caller.
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index f0ce478..1b3dd61 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -702,15 +702,11 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr)
spinlock_t *root_lock;
struct disttable *d;
int i;
- size_t s;
if (n > NETEM_DIST_MAX)
return -EINVAL;
- s = sizeof(struct disttable) + n * sizeof(s16);
- d = kmalloc(s, GFP_KERNEL | __GFP_NOWARN);
- if (!d)
- d = vmalloc(s);
+ d = kvmalloc(sizeof(struct disttable) + n * sizeof(s16), GFP_KERNEL);
if (!d)
return -ENOMEM;
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index b00e02c..332d94b 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -685,11 +685,7 @@ static int sfq_change(struct Qdisc *sch, struct nlattr *opt)
static void *sfq_alloc(size_t sz)
{
- void *ptr = kmalloc(sz, GFP_KERNEL | __GFP_NOWARN);
-
- if (!ptr)
- ptr = vmalloc(sz);
- return ptr;
+ return kvmalloc(sz, GFP_KERNEL);
}
static void sfq_free(void *addr)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 570fc95..c3bc9da 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2764,8 +2764,8 @@ static int nl80211_parse_mon_options(struct cfg80211_registered_device *rdev,
nla_data(info->attrs[NL80211_ATTR_MU_MIMO_GROUP_DATA]);
/* bits 0 and 63 are reserved and must be zero */
- if ((mumimo_groups[0] & BIT(7)) ||
- (mumimo_groups[VHT_MUMIMO_GROUPS_DATA_LEN - 1] & BIT(0)))
+ if ((mumimo_groups[0] & BIT(0)) ||
+ (mumimo_groups[VHT_MUMIMO_GROUPS_DATA_LEN - 1] & BIT(7)))
return -EINVAL;
params->vht_mumimo_groups = mumimo_groups;
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index baa3c7b..4b9569f 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -55,6 +55,7 @@
my $codespell = 0;
my $codespellfile = "/usr/share/codespell/dictionary.txt";
my $conststructsfile = "$D/const_structs.checkpatch";
+my $typedefsfile = "";
my $color = 1;
my $allow_c99_comments = 1;
@@ -113,6 +114,7 @@
--codespell Use the codespell dictionary for spelling/typos
(default:/usr/share/codespell/dictionary.txt)
--codespellfile Use this codespell dictionary
+ --typedefsfile Read additional types from this file
--color Use colors when output is STDOUT (default: on)
-h, --help, --version display this help and exit
@@ -208,6 +210,7 @@
'test-only=s' => \$tst_only,
'codespell!' => \$codespell,
'codespellfile=s' => \$codespellfile,
+ 'typedefsfile=s' => \$typedefsfile,
'color!' => \$color,
'h|help' => \$help,
'version' => \$help
@@ -629,29 +632,44 @@
$misspellings = join("|", sort keys %spelling_fix) if keys %spelling_fix;
-my $const_structs = "";
-if (open(my $conststructs, '<', $conststructsfile)) {
- while (<$conststructs>) {
- my $line = $_;
+sub read_words {
+ my ($wordsRef, $file) = @_;
- $line =~ s/\s*\n?$//g;
- $line =~ s/^\s*//g;
+ if (open(my $words, '<', $file)) {
+ while (<$words>) {
+ my $line = $_;
- next if ($line =~ m/^\s*#/);
- next if ($line =~ m/^\s*$/);
- if ($line =~ /\s/) {
- print("$conststructsfile: '$line' invalid - ignored\n");
- next;
+ $line =~ s/\s*\n?$//g;
+ $line =~ s/^\s*//g;
+
+ next if ($line =~ m/^\s*#/);
+ next if ($line =~ m/^\s*$/);
+ if ($line =~ /\s/) {
+ print("$file: '$line' invalid - ignored\n");
+ next;
+ }
+
+ $$wordsRef .= '|' if ($$wordsRef ne "");
+ $$wordsRef .= $line;
}
-
- $const_structs .= '|' if ($const_structs ne "");
- $const_structs .= $line;
+ close($file);
+ return 1;
}
- close($conststructsfile);
-} else {
- warn "No structs that should be const will be found - file '$conststructsfile': $!\n";
+
+ return 0;
}
+my $const_structs = "";
+read_words(\$const_structs, $conststructsfile)
+ or warn "No structs that should be const will be found - file '$conststructsfile': $!\n";
+
+my $typeOtherTypedefs = "";
+if (length($typedefsfile)) {
+ read_words(\$typeOtherTypedefs, $typedefsfile)
+ or warn "No additional types will be considered - file '$typedefsfile': $!\n";
+}
+$typeTypedefs .= '|' . $typeOtherTypedefs if ($typeOtherTypedefs ne "");
+
sub build_types {
my $mods = "(?x: \n" . join("|\n ", (@modifierList, @modifierListFile)) . "\n)";
my $all = "(?x: \n" . join("|\n ", (@typeList, @typeListFile)) . "\n)";
@@ -2195,8 +2213,7 @@
}
#next;
}
- if ($rawline=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@(.*)/) {
- my $context = $4;
+ if ($rawline =~ /^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
$realline=$1-1;
if (defined $2) {
$realcnt=$3+1;
@@ -2205,12 +2222,6 @@
}
$in_comment = 0;
- if ($context =~ /\b(\w+)\s*\(/) {
- $context_function = $1;
- } else {
- undef $context_function;
- }
-
# Guestimate if this is a continuing comment. Run
# the context looking for a comment "edge". If this
# edge is a close comment then we must be in a comment
@@ -2281,7 +2292,8 @@
#extract the line range in the file after the patch is applied
if (!$in_commit_log &&
- $line =~ /^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
+ $line =~ /^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@(.*)/) {
+ my $context = $4;
$is_patch = 1;
$first_line = $linenr + 1;
$realline=$1-1;
@@ -2297,6 +2309,11 @@
%suppress_whiletrailers = ();
%suppress_export = ();
$suppress_statement = 0;
+ if ($context =~ /\b(\w+)\s*\(/) {
+ $context_function = $1;
+ } else {
+ undef $context_function;
+ }
next;
# track the line number as we move through the hunk, note that
@@ -2539,6 +2556,7 @@
# Check for git id commit length and improperly formed commit descriptions
if ($in_commit_log && !$commit_log_possible_stack_dump &&
$line !~ /^\s*(?:Link|Patchwork|http|https|BugLink):/i &&
+ $line !~ /^This reverts commit [0-9a-f]{7,40}/ &&
($line =~ /\bcommit\s+[0-9a-f]{5,}\b/i ||
($line =~ /(?:\s|^)[0-9a-f]{12,40}(?:[\s"'\(\[]|$)/i &&
$line !~ /[\<\[][0-9a-f]{12,40}[\>\]]/i &&
@@ -2628,8 +2646,8 @@
# Check if it's the start of a commit log
# (not a header line and we haven't seen the patch filename)
if ($in_header_lines && $realfile =~ /^$/ &&
- !($rawline =~ /^\s+\S/ ||
- $rawline =~ /^(commit\b|from\b|[\w-]+:).*$/i)) {
+ !($rawline =~ /^\s+(?:\S|$)/ ||
+ $rawline =~ /^(?:commit\b|from\b|[\w-]+:)/i)) {
$in_header_lines = 0;
$in_commit_log = 1;
$has_commit_log = 1;
@@ -2757,13 +2775,6 @@
#print "is_start<$is_start> is_end<$is_end> length<$length>\n";
}
-# discourage the addition of CONFIG_EXPERIMENTAL in Kconfig.
- if ($realfile =~ /Kconfig/ &&
- $line =~ /.\s*depends on\s+.*\bEXPERIMENTAL\b/) {
- WARN("CONFIG_EXPERIMENTAL",
- "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n");
- }
-
# discourage the use of boolean for type definition attributes of Kconfig options
if ($realfile =~ /Kconfig/ &&
$line =~ /^\+\s*\bboolean\b/) {
@@ -3133,6 +3144,17 @@
# check we are in a valid C source file if not then ignore this hunk
next if ($realfile !~ /\.(h|c)$/);
+# check if this appears to be the start function declaration, save the name
+ if ($sline =~ /^\+\{\s*$/ &&
+ $prevline =~ /^\+(?:(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*)?($Ident)\(/) {
+ $context_function = $1;
+ }
+
+# check if this appears to be the end of function declaration
+ if ($sline =~ /^\+\}\s*$/) {
+ undef $context_function;
+ }
+
# check indentation of any line with a bare else
# (but not if it is a multiple line "if (foo) return bar; else return baz;")
# if the previous line is a break or return and is indented 1 tab more...
@@ -3157,12 +3179,6 @@
}
}
-# discourage the addition of CONFIG_EXPERIMENTAL in #if(def).
- if ($line =~ /^\+\s*\#\s*if.*\bCONFIG_EXPERIMENTAL\b/) {
- WARN("CONFIG_EXPERIMENTAL",
- "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n");
- }
-
# check for RCS/CVS revision markers
if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) {
WARN("CVS_KEYWORD",
@@ -3338,7 +3354,7 @@
}
# Check relative indent for conditionals and blocks.
- if ($line =~ /\b(?:(?:if|while|for|(?:[a-z_]+|)for_each[a-z_]+)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) {
+ if ($line =~ /\b(?:(?:if|while|for|(?:[a-z_]+|)for_each[a-z_]+)\s*\(|(?:do|else)\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) {
($stat, $cond, $line_nr_next, $remain_next, $off_next) =
ctx_statement_block($linenr, $realcnt, 0)
if (!defined $stat);
@@ -3430,6 +3446,8 @@
if ($check && $s ne '' &&
(($sindent % 8) != 0 ||
($sindent < $indent) ||
+ ($sindent == $indent &&
+ ($s !~ /^\s*(?:\}|\{|else\b)/)) ||
($sindent > $indent + 8))) {
WARN("SUSPECT_CODE_INDENT",
"suspect code indent for conditional statements ($indent, $sindent)\n" . $herecurr . "$stat_real\n");
@@ -4851,8 +4869,10 @@
$dstat !~ /^\(\{/ && # ({...
$ctx !~ /^.\s*#\s*define\s+TRACE_(?:SYSTEM|INCLUDE_FILE|INCLUDE_PATH)\b/)
{
-
- if ($dstat =~ /;/) {
+ if ($dstat =~ /^\s*if\b/) {
+ ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE",
+ "Macros starting with if should be enclosed by a do - while loop to avoid possible if/else logic defects\n" . "$herectx");
+ } elsif ($dstat =~ /;/) {
ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE",
"Macros with multiple statements should be enclosed in a do - while loop\n" . "$herectx");
} else {
@@ -5174,14 +5194,16 @@
"break quoted strings at a space character\n" . $hereprev);
}
-#check for an embedded function name in a string when the function is known
-# as part of a diff. This does not work for -f --file checking as it
-#depends on patch context providing the function name
+# check for an embedded function name in a string when the function is known
+# This does not work very well for -f --file checking as it depends on patch
+# context providing the function name or a single line form for in-file
+# function declarations
if ($line =~ /^\+.*$String/ &&
defined($context_function) &&
- get_quoted_string($line, $rawline) =~ /\b$context_function\b/) {
+ get_quoted_string($line, $rawline) =~ /\b$context_function\b/ &&
+ length(get_quoted_string($line, $rawline)) != (length($context_function) + 2)) {
WARN("EMBEDDED_FUNCTION_NAME",
- "Prefer using \"%s\", __func__ to embedded function names\n" . $herecurr);
+ "Prefer using '\"%s...\", __func__' to using '$context_function', this function's name, in a string\n" . $herecurr);
}
# check for spaces before a quoted newline
@@ -5676,6 +5698,32 @@
}
}
+ # check for vsprintf extension %p<foo> misuses
+ if ($^V && $^V ge 5.10.0 &&
+ defined $stat &&
+ $stat =~ /^\+(?![^\{]*\{\s*).*\b(\w+)\s*\(.*$String\s*,/s &&
+ $1 !~ /^_*volatile_*$/) {
+ my $bad_extension = "";
+ my $lc = $stat =~ tr@\n@@;
+ $lc = $lc + $linenr;
+ for (my $count = $linenr; $count <= $lc; $count++) {
+ my $fmt = get_quoted_string($lines[$count - 1], raw_line($count, 0));
+ $fmt =~ s/%%//g;
+ if ($fmt =~ /(\%[\*\d\.]*p(?![\WFfSsBKRraEhMmIiUDdgVCbGN]).)/) {
+ $bad_extension = $1;
+ last;
+ }
+ }
+ if ($bad_extension ne "") {
+ my $stat_real = raw_line($linenr, 0);
+ for (my $count = $linenr + 1; $count <= $lc; $count++) {
+ $stat_real = $stat_real . "\n" . raw_line($count, 0);
+ }
+ WARN("VSPRINTF_POINTER_EXTENSION",
+ "Invalid vsprintf pointer extension '$bad_extension'\n" . "$here\n$stat_real\n");
+ }
+ }
+
# Check for misused memsets
if ($^V && $^V ge 5.10.0 &&
defined $stat &&
@@ -5893,7 +5941,8 @@
# check for k[mz]alloc with multiplies that could be kmalloc_array/kcalloc
if ($^V && $^V ge 5.10.0 &&
- $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*(k[mz]alloc)\s*\(\s*($FuncArg)\s*\*\s*($FuncArg)\s*,/) {
+ defined $stat &&
+ $stat =~ /^\+\s*($Lval)\s*\=\s*(?:$balanced_parens)?\s*(k[mz]alloc)\s*\(\s*($FuncArg)\s*\*\s*($FuncArg)\s*,/) {
my $oldfunc = $3;
my $a1 = $4;
my $a2 = $10;
@@ -5907,11 +5956,17 @@
}
if ($r1 !~ /^sizeof\b/ && $r2 =~ /^sizeof\s*\S/ &&
!($r1 =~ /^$Constant$/ || $r1 =~ /^[A-Z_][A-Z0-9_]*$/)) {
+ my $ctx = '';
+ my $herectx = $here . "\n";
+ my $cnt = statement_rawlines($stat);
+ for (my $n = 0; $n < $cnt; $n++) {
+ $herectx .= raw_line($linenr, $n) . "\n";
+ }
if (WARN("ALLOC_WITH_MULTIPLY",
- "Prefer $newfunc over $oldfunc with multiply\n" . $herecurr) &&
+ "Prefer $newfunc over $oldfunc with multiply\n" . $herectx) &&
+ $cnt == 1 &&
$fix) {
$fixed[$fixlinenr] =~ s/\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*(k[mz]alloc)\s*\(\s*($FuncArg)\s*\*\s*($FuncArg)/$1 . ' = ' . "$newfunc(" . trim($r1) . ', ' . trim($r2)/e;
-
}
}
}
@@ -6066,11 +6121,11 @@
}
# check for various structs that are normally const (ops, kgdb, device_tree)
+# and avoid what seem like struct definitions 'struct foo {'
if ($line !~ /\bconst\b/ &&
- $line =~ /\bstruct\s+($const_structs)\b/) {
+ $line =~ /\bstruct\s+($const_structs)\b(?!\s*\{)/) {
WARN("CONST_STRUCT",
- "struct $1 should normally be const\n" .
- $herecurr);
+ "struct $1 should normally be const\n" . $herecurr);
}
# use of NR_CPUS is usually wrong
diff --git a/scripts/spelling.txt b/scripts/spelling.txt
index b67e74b..eb38f49 100644
--- a/scripts/spelling.txt
+++ b/scripts/spelling.txt
@@ -179,6 +179,7 @@
baloon||balloon
baloons||balloons
bandwith||bandwidth
+banlance||balance
batery||battery
beacuse||because
becasue||because
@@ -375,6 +376,8 @@
didnt||didn't
diferent||different
differrence||difference
+diffrent||different
+diffrentiate||differentiate
difinition||definition
diplay||display
direectly||directly
@@ -605,6 +608,9 @@
interupted||interrupted
interupt||interrupt
intial||initial
+intialisation||initialisation
+intialised||initialised
+intialise||initialise
intialization||initialization
intialized||initialized
intialize||initialize
@@ -691,6 +697,7 @@
mmnemonic||mnemonic
mnay||many
modulues||modules
+momery||memory
monochorome||monochrome
monochromo||monochrome
monocrome||monochrome
@@ -890,6 +897,7 @@
registeresd||registered
registes||registers
registraration||registration
+regsiter||register
regster||register
regualar||regular
reguator||regulator
diff --git a/security/apparmor/apparmorfs.c b/security/apparmor/apparmorfs.c
index 41073f7..4f6ac9d 100644
--- a/security/apparmor/apparmorfs.c
+++ b/security/apparmor/apparmorfs.c
@@ -98,7 +98,7 @@ static struct aa_loaddata *aa_simple_write_to_buffer(const char __user *userbuf,
return ERR_PTR(-ESPIPE);
/* freed by caller to simple_write_to_buffer */
- data = kvmalloc(sizeof(*data) + alloc_size);
+ data = kvmalloc(sizeof(*data) + alloc_size, GFP_KERNEL);
if (data == NULL)
return ERR_PTR(-ENOMEM);
kref_init(&data->count);
@@ -1357,7 +1357,7 @@ static int aa_mk_null_file(struct dentry *parent)
inode->i_ino = get_next_ino();
inode->i_mode = S_IFCHR | S_IRUGO | S_IWUGO;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode);
init_special_inode(inode, S_IFCHR | S_IRUGO | S_IWUGO,
MKDEV(MEM_MAJOR, 3));
d_instantiate(dentry, inode);
diff --git a/security/apparmor/include/lib.h b/security/apparmor/include/lib.h
index 0291ff3..550a700 100644
--- a/security/apparmor/include/lib.h
+++ b/security/apparmor/include/lib.h
@@ -64,17 +64,6 @@ char *aa_split_fqname(char *args, char **ns_name);
const char *aa_splitn_fqname(const char *fqname, size_t n, const char **ns_name,
size_t *ns_len);
void aa_info_message(const char *str);
-void *__aa_kvmalloc(size_t size, gfp_t flags);
-
-static inline void *kvmalloc(size_t size)
-{
- return __aa_kvmalloc(size, 0);
-}
-
-static inline void *kvzalloc(size_t size)
-{
- return __aa_kvmalloc(size, __GFP_ZERO);
-}
/**
* aa_strneq - compare null terminated @str to a non null terminated substring
diff --git a/security/apparmor/lib.c b/security/apparmor/lib.c
index 32cafc1..7cd788a 100644
--- a/security/apparmor/lib.c
+++ b/security/apparmor/lib.c
@@ -129,36 +129,6 @@ void aa_info_message(const char *str)
}
/**
- * __aa_kvmalloc - do allocation preferring kmalloc but falling back to vmalloc
- * @size: how many bytes of memory are required
- * @flags: the type of memory to allocate (see kmalloc).
- *
- * Return: allocated buffer or NULL if failed
- *
- * It is possible that policy being loaded from the user is larger than
- * what can be allocated by kmalloc, in those cases fall back to vmalloc.
- */
-void *__aa_kvmalloc(size_t size, gfp_t flags)
-{
- void *buffer = NULL;
-
- if (size == 0)
- return NULL;
-
- /* do not attempt kmalloc if we need more than 16 pages at once */
- if (size <= (16*PAGE_SIZE))
- buffer = kmalloc(size, flags | GFP_KERNEL | __GFP_NORETRY |
- __GFP_NOWARN);
- if (!buffer) {
- if (flags & __GFP_ZERO)
- buffer = vzalloc(size);
- else
- buffer = vmalloc(size);
- }
- return buffer;
-}
-
-/**
* aa_policy_init - initialize a policy structure
* @policy: policy to initialize (NOT NULL)
* @prefix: prefix name if any is required. (MAYBE NULL)
diff --git a/security/apparmor/match.c b/security/apparmor/match.c
index eb0efef..960c913 100644
--- a/security/apparmor/match.c
+++ b/security/apparmor/match.c
@@ -88,7 +88,7 @@ static struct table_header *unpack_table(char *blob, size_t bsize)
if (bsize < tsize)
goto out;
- table = kvzalloc(tsize);
+ table = kvzalloc(tsize, GFP_KERNEL);
if (table) {
table->td_id = th.td_id;
table->td_flags = th.td_flags;
diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c
index 2e37c9c..f3422a9 100644
--- a/security/apparmor/policy_unpack.c
+++ b/security/apparmor/policy_unpack.c
@@ -487,7 +487,7 @@ static bool unpack_rlimits(struct aa_ext *e, struct aa_profile *profile)
static void *kvmemdup(const void *src, size_t len)
{
- void *p = kvmalloc(len);
+ void *p = kvmalloc(len, GFP_KERNEL);
if (p)
memcpy(p, src, len);
diff --git a/security/inode.c b/security/inode.c
index 2cb1416..eccd58e 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -28,7 +28,7 @@ static int mount_count;
static int fill_super(struct super_block *sb, void *data, int silent)
{
- static struct tree_descr files[] = {{""}};
+ static const struct tree_descr files[] = {{""}};
return simple_fill_super(sb, SECURITYFS_MAGIC, files);
}
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 82a9e185..447a7d5 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -101,14 +101,9 @@ SYSCALL_DEFINE5(add_key, const char __user *, _type,
if (_payload) {
ret = -ENOMEM;
- payload = kmalloc(plen, GFP_KERNEL | __GFP_NOWARN);
- if (!payload) {
- if (plen <= PAGE_SIZE)
- goto error2;
- payload = vmalloc(plen);
- if (!payload)
- goto error2;
- }
+ payload = kvmalloc(plen, GFP_KERNEL);
+ if (!payload)
+ goto error2;
ret = -EFAULT;
if (copy_from_user(payload, _payload, plen) != 0)
@@ -1071,14 +1066,9 @@ long keyctl_instantiate_key_common(key_serial_t id,
if (from) {
ret = -ENOMEM;
- payload = kmalloc(plen, GFP_KERNEL);
- if (!payload) {
- if (plen <= PAGE_SIZE)
- goto error;
- payload = vmalloc(plen);
- if (!payload)
- goto error;
- }
+ payload = kvmalloc(plen, GFP_KERNEL);
+ if (!payload)
+ goto error;
ret = -EFAULT;
if (!copy_from_iter_full(payload, plen, from))
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index ce71718..50062e7 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -1496,7 +1496,7 @@ static const struct file_operations sel_avc_cache_stats_ops = {
static int sel_make_avc_files(struct dentry *dir)
{
int i;
- static struct tree_descr files[] = {
+ static const struct tree_descr files[] = {
{ "cache_threshold",
&sel_avc_cache_threshold_ops, S_IRUGO|S_IWUSR },
{ "hash_stats", &sel_avc_hash_stats_ops, S_IRUGO },
@@ -1805,7 +1805,7 @@ static int sel_fill_super(struct super_block *sb, void *data, int silent)
struct inode *inode;
struct inode_security_struct *isec;
- static struct tree_descr selinux_files[] = {
+ static const struct tree_descr selinux_files[] = {
[SEL_LOAD] = {"load", &sel_load_ops, S_IRUSR|S_IWUSR},
[SEL_ENFORCE] = {"enforce", &sel_enforce_ops, S_IRUGO|S_IWUSR},
[SEL_CONTEXT] = {"context", &transaction_ops, S_IRUGO|S_IWUGO},
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 366b835..f6482e5 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -2855,7 +2855,7 @@ static int smk_fill_super(struct super_block *sb, void *data, int silent)
int rc;
struct inode *root_inode;
- static struct tree_descr smack_files[] = {
+ static const struct tree_descr smack_files[] = {
[SMK_LOAD] = {
"load", &smk_load_ops, S_IRUGO|S_IWUSR},
[SMK_CIPSO] = {
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index b786fba..1770f08 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -53,7 +53,7 @@
#ifdef CONFIG_X86
/* for snoop control */
#include <asm/pgtable.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/cpufeature.h>
#endif
#include <sound/core.h>
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 9720a30..6d17b17 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -40,7 +40,9 @@
#include <sound/initval.h>
/* for 440MX workaround */
#include <asm/pgtable.h>
-#include <asm/cacheflush.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
MODULE_DESCRIPTION("Intel 82801AA,82901AB,i810,i820,i830,i840,i845,MX440; SiS 7012; Ali 5455");
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 525f2f3..aae099c 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -936,7 +936,7 @@ static struct snd_soc_component *soc_find_component(
*
* @dlc: name of the DAI and optional component info to match
*
- * This function will search all regsitered components and their DAIs to
+ * This function will search all registered components and their DAIs to
* find the DAI of the same name. The component's of_node and name
* should also match if being specified.
*
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c
index c505b01..664b7fe 100644
--- a/sound/x86/intel_hdmi_audio.c
+++ b/sound/x86/intel_hdmi_audio.c
@@ -30,7 +30,7 @@
#include <linux/pm_runtime.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
-#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <sound/core.h>
#include <sound/asoundef.h>
#include <sound/pcm.h>
diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
new file mode 100644
index 0000000..ad54a58
--- /dev/null
+++ b/tools/pci/pcitest.c
@@ -0,0 +1,186 @@
+/**
+ * Userspace PCI Endpoint Test Module
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <linux/pcitest.h>
+
+#define BILLION 1E9
+
+static char *result[] = { "NOT OKAY", "OKAY" };
+
+struct pci_test {
+ char *device;
+ char barnum;
+ bool legacyirq;
+ unsigned int msinum;
+ bool read;
+ bool write;
+ bool copy;
+ unsigned long size;
+};
+
+static int run_test(struct pci_test *test)
+{
+ long ret;
+ int fd;
+ struct timespec start, end;
+ double time;
+
+ fd = open(test->device, O_RDWR);
+ if (fd < 0) {
+ perror("can't open PCI Endpoint Test device");
+ return fd;
+ }
+
+ if (test->barnum >= 0 && test->barnum <= 5) {
+ ret = ioctl(fd, PCITEST_BAR, test->barnum);
+ fprintf(stdout, "BAR%d:\t\t", test->barnum);
+ if (ret < 0)
+ fprintf(stdout, "TEST FAILED\n");
+ else
+ fprintf(stdout, "%s\n", result[ret]);
+ }
+
+ if (test->legacyirq) {
+ ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
+ fprintf(stdout, "LEGACY IRQ:\t");
+ if (ret < 0)
+ fprintf(stdout, "TEST FAILED\n");
+ else
+ fprintf(stdout, "%s\n", result[ret]);
+ }
+
+ if (test->msinum > 0 && test->msinum <= 32) {
+ ret = ioctl(fd, PCITEST_MSI, test->msinum);
+ fprintf(stdout, "MSI%d:\t\t", test->msinum);
+ if (ret < 0)
+ fprintf(stdout, "TEST FAILED\n");
+ else
+ fprintf(stdout, "%s\n", result[ret]);
+ }
+
+ if (test->write) {
+ ret = ioctl(fd, PCITEST_WRITE, test->size);
+ fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
+ if (ret < 0)
+ fprintf(stdout, "TEST FAILED\n");
+ else
+ fprintf(stdout, "%s\n", result[ret]);
+ }
+
+ if (test->read) {
+ ret = ioctl(fd, PCITEST_READ, test->size);
+ fprintf(stdout, "READ (%7ld bytes):\t\t", test->size);
+ if (ret < 0)
+ fprintf(stdout, "TEST FAILED\n");
+ else
+ fprintf(stdout, "%s\n", result[ret]);
+ }
+
+ if (test->copy) {
+ ret = ioctl(fd, PCITEST_COPY, test->size);
+ fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size);
+ if (ret < 0)
+ fprintf(stdout, "TEST FAILED\n");
+ else
+ fprintf(stdout, "%s\n", result[ret]);
+ }
+
+ fflush(stdout);
+}
+
+int main(int argc, char **argv)
+{
+ int c;
+ struct pci_test *test;
+
+ test = calloc(1, sizeof(*test));
+ if (!test) {
+ perror("Fail to allocate memory for pci_test\n");
+ return -ENOMEM;
+ }
+
+ /* since '0' is a valid BAR number, initialize it to -1 */
+ test->barnum = -1;
+
+ /* set default size as 100KB */
+ test->size = 0x19000;
+
+ /* set default endpoint device */
+ test->device = "/dev/pci-endpoint-test.0";
+
+ while ((c = getopt(argc, argv, "D:b:m:lrwcs:")) != EOF)
+ switch (c) {
+ case 'D':
+ test->device = optarg;
+ continue;
+ case 'b':
+ test->barnum = atoi(optarg);
+ if (test->barnum < 0 || test->barnum > 5)
+ goto usage;
+ continue;
+ case 'l':
+ test->legacyirq = true;
+ continue;
+ case 'm':
+ test->msinum = atoi(optarg);
+ if (test->msinum < 1 || test->msinum > 32)
+ goto usage;
+ continue;
+ case 'r':
+ test->read = true;
+ continue;
+ case 'w':
+ test->write = true;
+ continue;
+ case 'c':
+ test->copy = true;
+ continue;
+ case 's':
+ test->size = strtoul(optarg, NULL, 0);
+ continue;
+ case '?':
+ case 'h':
+ default:
+usage:
+ fprintf(stderr,
+ "usage: %s [options]\n"
+ "Options:\n"
+ "\t-D <dev> PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
+ "\t-b <bar num> BAR test (bar number between 0..5)\n"
+ "\t-m <msi num> MSI test (msi number between 1..32)\n"
+ "\t-r Read buffer test\n"
+ "\t-w Write buffer test\n"
+ "\t-c Copy buffer test\n"
+ "\t-s <size> Size of buffer {default: 100KB}\n",
+ argv[0]);
+ return -EINVAL;
+ }
+
+ run_test(test);
+ return 0;
+}
diff --git a/tools/pci/pcitest.sh b/tools/pci/pcitest.sh
new file mode 100644
index 0000000..5442bbe
--- /dev/null
+++ b/tools/pci/pcitest.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+
+echo "BAR tests"
+echo
+
+bar=0
+
+while [ $bar -lt 6 ]
+do
+ pcitest -b $bar
+ bar=`expr $bar + 1`
+done
+echo
+
+echo "Interrupt tests"
+echo
+
+pcitest -l
+msi=1
+
+while [ $msi -lt 33 ]
+do
+ pcitest -m $msi
+ msi=`expr $msi + 1`
+done
+echo
+
+echo "Read Tests"
+echo
+
+pcitest -r -s 1
+pcitest -r -s 1024
+pcitest -r -s 1025
+pcitest -r -s 1024000
+pcitest -r -s 1024001
+echo
+
+echo "Write Tests"
+echo
+
+pcitest -w -s 1
+pcitest -w -s 1024
+pcitest -w -s 1025
+pcitest -w -s 1024000
+pcitest -w -s 1024001
+echo
+
+echo "Copy Tests"
+echo
+
+pcitest -c -s 1
+pcitest -c -s 1024
+pcitest -c -s 1025
+pcitest -c -s 1024000
+pcitest -c -s 1024001
+echo
diff --git a/tools/testing/selftests/.gitignore b/tools/testing/selftests/.gitignore
index f0600d2..9175035 100644
--- a/tools/testing/selftests/.gitignore
+++ b/tools/testing/selftests/.gitignore
@@ -1 +1,5 @@
kselftest
+gpiogpio-event-mon
+gpiogpio-hammer
+gpioinclude/
+gpiolsgpio
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index d8593f1..26ce4f7 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -39,7 +39,7 @@
TARGETS += zram
#Please keep the TARGETS list alphabetically sorted
# Run "make quicktest=1 run_tests" or
-# "make quicktest=1 kselftest from top level Makefile
+# "make quicktest=1 kselftest" from top level Makefile
TARGETS_HOTPLUG = cpu-hotplug
TARGETS_HOTPLUG += memory-hotplug
@@ -133,4 +133,4 @@
make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
-.PHONY: install
+.PHONY: all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean
diff --git a/tools/testing/selftests/breakpoints/Makefile b/tools/testing/selftests/breakpoints/Makefile
index 72aa103..6b214b7 100644
--- a/tools/testing/selftests/breakpoints/Makefile
+++ b/tools/testing/selftests/breakpoints/Makefile
@@ -5,7 +5,7 @@
ifeq ($(ARCH),x86)
TEST_GEN_PROGS := breakpoint_test
endif
-ifeq ($(ARCH),aarch64)
+ifneq (,$(filter $(ARCH),aarch64 arm64))
TEST_GEN_PROGS := breakpoint_test_arm64
endif
diff --git a/tools/testing/selftests/cpufreq/config b/tools/testing/selftests/cpufreq/config
new file mode 100644
index 0000000..27ff72e
--- /dev/null
+++ b/tools/testing/selftests/cpufreq/config
@@ -0,0 +1,15 @@
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
diff --git a/tools/testing/selftests/ftrace/config b/tools/testing/selftests/ftrace/config
index ef82146..8a1c9f9 100644
--- a/tools/testing/selftests/ftrace/config
+++ b/tools/testing/selftests/ftrace/config
@@ -1 +1,2 @@
+CONFIG_KPROBES=y
CONFIG_FTRACE=y
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
index 0a78705..c75faef 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
@@ -26,7 +26,7 @@
test $X2 = $X3
test 0x$X3 = $3
- B4=`printf "%x" $4`
+ B4=`printf "%02x" $4`
B3=`echo -n $X3 | tail -c 3 | head -c 2`
test $B3 = $B4
}
diff --git a/tools/testing/selftests/futex/Makefile b/tools/testing/selftests/futex/Makefile
index 653c5cd..e2fbb89 100644
--- a/tools/testing/selftests/futex/Makefile
+++ b/tools/testing/selftests/futex/Makefile
@@ -8,7 +8,7 @@
all:
for DIR in $(SUBDIRS); do \
- BUILD_TARGET=$$OUTPUT/$$DIR; \
+ BUILD_TARGET=$(OUTPUT)/$$DIR; \
mkdir $$BUILD_TARGET -p; \
make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
done
@@ -22,7 +22,7 @@
install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES)
@for SUBDIR in $(SUBDIRS); do \
- BUILD_TARGET=$$OUTPUT/$$SUBDIR; \
+ BUILD_TARGET=$(OUTPUT)/$$SUBDIR; \
mkdir $$BUILD_TARGET -p; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$SUBDIR INSTALL_PATH=$(INSTALL_PATH)/$$SUBDIR install; \
done;
@@ -32,9 +32,10 @@
echo "./run.sh"
endef
-clean:
+override define CLEAN
for DIR in $(SUBDIRS); do \
- BUILD_TARGET=$$OUTPUT/$$DIR; \
+ BUILD_TARGET=$(OUTPUT)/$$DIR; \
mkdir $$BUILD_TARGET -p; \
make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
done
+endef
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile
index 205e4d1..298929d 100644
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -2,13 +2,20 @@
TEST_PROGS := gpio-mockup.sh
TEST_FILES := gpio-mockup-sysfs.sh $(BINARIES)
BINARIES := gpio-mockup-chardev
+EXTRA_PROGS := ../gpiogpio-event-mon ../gpiogpio-hammer ../gpiolsgpio
+EXTRA_DIRS := ../gpioinclude/
+EXTRA_OBJS := ../gpiogpio-event-mon-in.o ../gpiogpio-event-mon.o
+EXTRA_OBJS += ../gpiogpio-hammer-in.o ../gpiogpio-utils.o ../gpiolsgpio-in.o
+EXTRA_OBJS += ../gpiolsgpio.o
include ../lib.mk
all: $(BINARIES)
-clean:
- $(RM) $(BINARIES)
+override define CLEAN
+ $(RM) $(BINARIES) $(EXTRA_PROGS) $(EXTRA_OBJS)
+ $(RM) -r $(EXTRA_DIRS)
+endef
CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/
LDLIBS += -lmount -I/usr/include/libmount
diff --git a/tools/testing/selftests/gpio/config b/tools/testing/selftests/gpio/config
new file mode 100644
index 0000000..abaa690
--- /dev/null
+++ b/tools/testing/selftests/gpio/config
@@ -0,0 +1,2 @@
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_MOCKUP=m
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index 775c589..959273c 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -51,8 +51,12 @@
emit_tests:
$(EMIT_TESTS)
-clean:
+define CLEAN
$(RM) -r $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(EXTRA_CLEAN)
+endef
+
+clean:
+ $(CLEAN)
$(OUTPUT)/%:%.c
$(LINK.c) $^ $(LDLIBS) -o $@
diff --git a/tools/testing/selftests/lib/config b/tools/testing/selftests/lib/config
new file mode 100644
index 0000000..126933b
--- /dev/null
+++ b/tools/testing/selftests/lib/config
@@ -0,0 +1,3 @@
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
+CONFIG_PRIME_NUMBERS=m
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 03e1617..72c3ac2 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -60,12 +60,13 @@
done;
endef
-clean:
+override define CLEAN
@for TARGET in $(SUB_DIRS); do \
BUILD_TARGET=$(OUTPUT)/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean; \
done;
rm -f tags
+endef
tags:
find . -name '*.c' -o -name '*.h' | xargs ctags
diff --git a/tools/testing/selftests/splice/Makefile b/tools/testing/selftests/splice/Makefile
index de51f43..9fc78e5 100644
--- a/tools/testing/selftests/splice/Makefile
+++ b/tools/testing/selftests/splice/Makefile
@@ -4,5 +4,4 @@
include ../lib.mk
-clean:
- rm -fr $(TEST_PROGS) $(EXTRA)
+EXTRA_CLEAN := $(EXTRA)
diff --git a/tools/testing/selftests/sync/Makefile b/tools/testing/selftests/sync/Makefile
index 87ac400..4981c6b 100644
--- a/tools/testing/selftests/sync/Makefile
+++ b/tools/testing/selftests/sync/Makefile
@@ -20,5 +20,4 @@
sync_test: $(OBJS) $(TESTS)
-clean:
- $(RM) sync_test $(OBJS) $(TESTS)
+EXTRA_CLEAN := sync_test $(OBJS) $(TESTS)
diff --git a/tools/testing/selftests/timers/clocksource-switch.c b/tools/testing/selftests/timers/clocksource-switch.c
index fd88e30..5ff1653 100644
--- a/tools/testing/selftests/timers/clocksource-switch.c
+++ b/tools/testing/selftests/timers/clocksource-switch.c
@@ -159,7 +159,7 @@ int main(int argv, char **argc)
}
- printf("Running Asyncrhonous Switching Tests...\n");
+ printf("Running Asynchronous Switching Tests...\n");
pid = fork();
if (!pid)
return run_tests(60);
diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index dba8890..cbb29e4 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -16,6 +16,7 @@
TEST_GEN_FILES += transhuge-stress
TEST_GEN_FILES += userfaultfd
TEST_GEN_FILES += mlock-random-test
+TEST_GEN_FILES += virtual_address_range
TEST_PROGS := run_vmtests
diff --git a/tools/testing/selftests/vm/config b/tools/testing/selftests/vm/config
index 698c7ed..1c0d76c 100644
--- a/tools/testing/selftests/vm/config
+++ b/tools/testing/selftests/vm/config
@@ -1 +1,2 @@
+CONFIG_SYSVIPC=y
CONFIG_USERFAULTFD=y
diff --git a/tools/testing/selftests/vm/map_hugetlb.c b/tools/testing/selftests/vm/map_hugetlb.c
index addcd6f..77687ab 100644
--- a/tools/testing/selftests/vm/map_hugetlb.c
+++ b/tools/testing/selftests/vm/map_hugetlb.c
@@ -62,7 +62,7 @@ int main(void)
void *addr;
int ret;
- addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, 0, 0);
+ addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
exit(1);
diff --git a/tools/testing/selftests/vm/mlock2-tests.c b/tools/testing/selftests/vm/mlock2-tests.c
index ff0cda2..e5dbc87 100644
--- a/tools/testing/selftests/vm/mlock2-tests.c
+++ b/tools/testing/selftests/vm/mlock2-tests.c
@@ -293,7 +293,7 @@ static int test_mlock_lock()
unsigned long page_size = getpagesize();
map = mmap(NULL, 2 * page_size, PROT_READ | PROT_WRITE,
- MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
if (map == MAP_FAILED) {
perror("test_mlock_locked mmap");
goto out;
@@ -402,7 +402,7 @@ static int test_mlock_onfault()
unsigned long page_size = getpagesize();
map = mmap(NULL, 2 * page_size, PROT_READ | PROT_WRITE,
- MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
if (map == MAP_FAILED) {
perror("test_mlock_locked mmap");
goto out;
@@ -445,7 +445,7 @@ static int test_lock_onfault_of_present()
uint64_t page1_flags, page2_flags;
map = mmap(NULL, 2 * page_size, PROT_READ | PROT_WRITE,
- MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
if (map == MAP_FAILED) {
perror("test_mlock_locked mmap");
goto out;
@@ -492,7 +492,7 @@ static int test_munlockall()
unsigned long page_size = getpagesize();
map = mmap(NULL, 2 * page_size, PROT_READ | PROT_WRITE,
- MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
if (map == MAP_FAILED) {
perror("test_munlockall mmap");
@@ -518,7 +518,7 @@ static int test_munlockall()
munmap(map, 2 * page_size);
map = mmap(NULL, 2 * page_size, PROT_READ | PROT_WRITE,
- MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
if (map == MAP_FAILED) {
perror("test_munlockall second mmap");
@@ -573,7 +573,7 @@ static int test_vma_management(bool call_mlock)
struct vm_boundaries page3;
map = mmap(NULL, 3 * page_size, PROT_READ | PROT_WRITE,
- MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
if (map == MAP_FAILED) {
perror("mmap()");
return ret;
diff --git a/tools/testing/selftests/vm/on-fault-limit.c b/tools/testing/selftests/vm/on-fault-limit.c
index 0ae458f..7f96a5c 100644
--- a/tools/testing/selftests/vm/on-fault-limit.c
+++ b/tools/testing/selftests/vm/on-fault-limit.c
@@ -26,7 +26,7 @@ static int test_limit(void)
}
map = mmap(NULL, 2 * lims.rlim_max, PROT_READ | PROT_WRITE,
- MAP_PRIVATE | MAP_ANONYMOUS | MAP_POPULATE, 0, 0);
+ MAP_PRIVATE | MAP_ANONYMOUS | MAP_POPULATE, -1, 0);
if (map != MAP_FAILED)
printf("mmap should have failed, but didn't\n");
else {
diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests
index 3214a64..07548a1 100755
--- a/tools/testing/selftests/vm/run_vmtests
+++ b/tools/testing/selftests/vm/run_vmtests
@@ -49,9 +49,9 @@
mkdir $mnt
mount -t hugetlbfs none $mnt
-echo "--------------------"
+echo "---------------------"
echo "running hugepage-mmap"
-echo "--------------------"
+echo "---------------------"
./hugepage-mmap
if [ $? -ne 0 ]; then
echo "[FAIL]"
@@ -77,9 +77,9 @@
echo $shmmax > /proc/sys/kernel/shmmax
echo $shmall > /proc/sys/kernel/shmall
-echo "--------------------"
+echo "-------------------"
echo "running map_hugetlb"
-echo "--------------------"
+echo "-------------------"
./map_hugetlb
if [ $? -ne 0 ]; then
echo "[FAIL]"
@@ -92,9 +92,9 @@
echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
echo " hugetlb regression testing."
-echo "--------------------"
+echo "-------------------"
echo "running userfaultfd"
-echo "--------------------"
+echo "-------------------"
./userfaultfd anon 128 32
if [ $? -ne 0 ]; then
echo "[FAIL]"
@@ -103,10 +103,10 @@
echo "[PASS]"
fi
-echo "----------------------------"
+echo "---------------------------"
echo "running userfaultfd_hugetlb"
-echo "----------------------------"
-# 258MB total huge pages == 128MB src and 128MB dst
+echo "---------------------------"
+# 256MB total huge pages == 128MB src and 128MB dst
./userfaultfd hugetlb 128 32 $mnt/ufd_test_file
if [ $? -ne 0 ]; then
echo "[FAIL]"
@@ -116,9 +116,9 @@
fi
rm -f $mnt/ufd_test_file
-echo "----------------------------"
+echo "-------------------------"
echo "running userfaultfd_shmem"
-echo "----------------------------"
+echo "-------------------------"
./userfaultfd shmem 128 32
if [ $? -ne 0 ]; then
echo "[FAIL]"
@@ -143,9 +143,9 @@
echo "[PASS]"
fi
-echo "--------------------"
+echo "----------------------"
echo "running on-fault-limit"
-echo "--------------------"
+echo "----------------------"
sudo -u nobody ./on-fault-limit
if [ $? -ne 0 ]; then
echo "[FAIL]"
@@ -165,4 +165,15 @@
echo "[PASS]"
fi
+echo "-----------------------------"
+echo "running virtual_address_range"
+echo "-----------------------------"
+./virtual_address_range
+if [ $? -ne 0 ]; then
+ echo "[FAIL]"
+ exitcode=1
+else
+ echo "[PASS]"
+fi
+
exit $exitcode
diff --git a/tools/testing/selftests/vm/thuge-gen.c b/tools/testing/selftests/vm/thuge-gen.c
index 0bc737a..88a2ab5 100644
--- a/tools/testing/selftests/vm/thuge-gen.c
+++ b/tools/testing/selftests/vm/thuge-gen.c
@@ -146,7 +146,7 @@ void test_mmap(unsigned long size, unsigned flags)
before = read_free(size);
map = mmap(NULL, size*NUM_PAGES, PROT_READ|PROT_WRITE,
- MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB|flags, 0, 0);
+ MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB|flags, -1, 0);
if (map == (char *)-1) err("mmap");
memset(map, 0xff, size*NUM_PAGES);
diff --git a/tools/testing/selftests/vm/virtual_address_range.c b/tools/testing/selftests/vm/virtual_address_range.c
new file mode 100644
index 0000000..3b02aa6
--- /dev/null
+++ b/tools/testing/selftests/vm/virtual_address_range.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2017, Anshuman Khandual, IBM Corp.
+ * Licensed under GPLv2.
+ *
+ * Works on architectures which support 128TB virtual
+ * address range and beyond.
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <numaif.h>
+#include <sys/mman.h>
+#include <sys/time.h>
+
+/*
+ * Maximum address range mapped with a single mmap()
+ * call is little bit more than 16GB. Hence 16GB is
+ * chosen as the single chunk size for address space
+ * mapping.
+ */
+#define MAP_CHUNK_SIZE 17179869184UL /* 16GB */
+
+/*
+ * Address space till 128TB is mapped without any hint
+ * and is enabled by default. Address space beyond 128TB
+ * till 512TB is obtained by passing hint address as the
+ * first argument into mmap() system call.
+ *
+ * The process heap address space is divided into two
+ * different areas one below 128TB and one above 128TB
+ * till it reaches 512TB. One with size 128TB and the
+ * other being 384TB.
+ */
+#define NR_CHUNKS_128TB 8192UL /* Number of 16GB chunks for 128TB */
+#define NR_CHUNKS_384TB 24576UL /* Number of 16GB chunks for 384TB */
+
+#define ADDR_MARK_128TB (1UL << 47) /* First address beyond 128TB */
+
+static char *hind_addr(void)
+{
+ int bits = 48 + rand() % 15;
+
+ return (char *) (1UL << bits);
+}
+
+static int validate_addr(char *ptr, int high_addr)
+{
+ unsigned long addr = (unsigned long) ptr;
+
+ if (high_addr) {
+ if (addr < ADDR_MARK_128TB) {
+ printf("Bad address %lx\n", addr);
+ return 1;
+ }
+ return 0;
+ }
+
+ if (addr > ADDR_MARK_128TB) {
+ printf("Bad address %lx\n", addr);
+ return 1;
+ }
+ return 0;
+}
+
+static int validate_lower_address_hint(void)
+{
+ char *ptr;
+
+ ptr = mmap((void *) (1UL << 45), MAP_CHUNK_SIZE, PROT_READ |
+ PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+
+ if (ptr == MAP_FAILED)
+ return 0;
+
+ return 1;
+}
+
+int main(int argc, char *argv[])
+{
+ char *ptr[NR_CHUNKS_128TB];
+ char *hptr[NR_CHUNKS_384TB];
+ char *hint;
+ unsigned long i, lchunks, hchunks;
+
+ for (i = 0; i < NR_CHUNKS_128TB; i++) {
+ ptr[i] = mmap(NULL, MAP_CHUNK_SIZE, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+
+ if (ptr[i] == MAP_FAILED) {
+ if (validate_lower_address_hint())
+ return 1;
+ break;
+ }
+
+ if (validate_addr(ptr[i], 0))
+ return 1;
+ }
+ lchunks = i;
+
+ for (i = 0; i < NR_CHUNKS_384TB; i++) {
+ hint = hind_addr();
+ hptr[i] = mmap(hint, MAP_CHUNK_SIZE, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+
+ if (hptr[i] == MAP_FAILED)
+ break;
+
+ if (validate_addr(hptr[i], 1))
+ return 1;
+ }
+ hchunks = i;
+
+ for (i = 0; i < lchunks; i++)
+ munmap(ptr[i], MAP_CHUNK_SIZE);
+
+ for (i = 0; i < hchunks; i++)
+ munmap(hptr[i], MAP_CHUNK_SIZE);
+
+ return 0;
+}
diff --git a/tools/testing/selftests/watchdog/watchdog-test.c b/tools/testing/selftests/watchdog/watchdog-test.c
index 6983d05..a74c9d7 100644
--- a/tools/testing/selftests/watchdog/watchdog-test.c
+++ b/tools/testing/selftests/watchdog/watchdog-test.c
@@ -24,9 +24,11 @@ const char v = 'V';
static void keep_alive(void)
{
int dummy;
+ int ret;
- printf(".");
- ioctl(fd, WDIOC_KEEPALIVE, &dummy);
+ ret = ioctl(fd, WDIOC_KEEPALIVE, &dummy);
+ if (!ret)
+ printf(".");
}
/*
@@ -51,6 +53,7 @@ int main(int argc, char *argv[])
int flags;
unsigned int ping_rate = 1;
int ret;
+ int i;
setbuf(stdout, NULL);
@@ -61,31 +64,35 @@ int main(int argc, char *argv[])
exit(-1);
}
- if (argc > 1) {
- if (!strncasecmp(argv[1], "-d", 2)) {
- flags = WDIOS_DISABLECARD;
- ioctl(fd, WDIOC_SETOPTIONS, &flags);
- printf("Watchdog card disabled.\n");
- goto end;
- } else if (!strncasecmp(argv[1], "-e", 2)) {
- flags = WDIOS_ENABLECARD;
- ioctl(fd, WDIOC_SETOPTIONS, &flags);
- printf("Watchdog card enabled.\n");
- goto end;
- } else if (!strncasecmp(argv[1], "-t", 2) && argv[2]) {
- flags = atoi(argv[2]);
- ioctl(fd, WDIOC_SETTIMEOUT, &flags);
- printf("Watchdog timeout set to %u seconds.\n", flags);
- goto end;
- } else if (!strncasecmp(argv[1], "-p", 2) && argv[2]) {
- ping_rate = strtoul(argv[2], NULL, 0);
- printf("Watchdog ping rate set to %u seconds.\n", ping_rate);
- } else {
- printf("-d to disable, -e to enable, -t <n> to set " \
- "the timeout,\n-p <n> to set the ping rate, and \n");
- printf("run by itself to tick the card.\n");
- goto end;
- }
+ for (i = 1; i < argc; i++) {
+ if (!strncasecmp(argv[i], "-d", 2)) {
+ flags = WDIOS_DISABLECARD;
+ ret = ioctl(fd, WDIOC_SETOPTIONS, &flags);
+ if (!ret)
+ printf("Watchdog card disabled.\n");
+ } else if (!strncasecmp(argv[i], "-e", 2)) {
+ flags = WDIOS_ENABLECARD;
+ ret = ioctl(fd, WDIOC_SETOPTIONS, &flags);
+ if (!ret)
+ printf("Watchdog card enabled.\n");
+ } else if (!strncasecmp(argv[i], "-t", 2) && argv[2]) {
+ flags = atoi(argv[i + 1]);
+ ret = ioctl(fd, WDIOC_SETTIMEOUT, &flags);
+ if (!ret)
+ printf("Watchdog timeout set to %u seconds.\n", flags);
+ i++;
+ } else if (!strncasecmp(argv[i], "-p", 2) && argv[2]) {
+ ping_rate = strtoul(argv[i + 1], NULL, 0);
+ printf("Watchdog ping rate set to %u seconds.\n", ping_rate);
+ i++;
+ } else {
+ printf("-d to disable, -e to enable, -t <n> to set "
+ "the timeout,\n-p <n> to set the ping rate, and ");
+ printf("run by itself to tick the card.\n");
+ printf("Parameters are parsed left-to-right in real-time.\n");
+ printf("Example: %s -d -t 10 -p 5 -e\n", argv[0]);
+ goto end;
+ }
}
printf("Watchdog Ticking Away!\n");
diff --git a/tools/testing/selftests/x86/.gitignore b/tools/testing/selftests/x86/.gitignore
index 15034fe..7757f73 100644
--- a/tools/testing/selftests/x86/.gitignore
+++ b/tools/testing/selftests/x86/.gitignore
@@ -1,2 +1,15 @@
*_32
*_64
+single_step_syscall
+sysret_ss_attrs
+syscall_nt
+ptrace_syscall
+test_mremap_vdso
+check_initial_reg_state
+sigreturn
+ldt_gdt
+iopl
+mpx-mini-test
+ioperm
+protection_keys
+test_vdso
diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile
index 38e0a9c..97f187e 100644
--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -40,8 +40,7 @@
all_64: $(BINARIES_64)
-clean:
- $(RM) $(BINARIES_32) $(BINARIES_64)
+EXTRA_CLEAN := $(BINARIES_32) $(BINARIES_64)
$(BINARIES_32): $(OUTPUT)/%_32: %.c
$(CC) -m32 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl -lm
diff --git a/usr/Kconfig b/usr/Kconfig
index 6278f1352..c0c4850 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -21,6 +21,16 @@
If you are not sure, leave it blank.
+config INITRAMFS_FORCE
+ bool "Ignore the initramfs passed by the bootloader"
+ depends on CMDLINE_EXTEND || CMDLINE_FORCE
+ help
+ This option causes the kernel to ignore the initramfs image
+ (or initrd image) passed to it by the bootloader. This is
+ analogous to CMDLINE_FORCE, which is found on some architectures,
+ and is useful if you cannot or don't want to change the image
+ your bootloader passes to the kernel.
+
config INITRAMFS_ROOT_UID
int "User ID to map to 0 (user root)"
depends on INITRAMFS_SOURCE!=""
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 6e3b12c..b3d151ee 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -523,7 +523,7 @@ static struct kvm_memslots *kvm_alloc_memslots(void)
int i;
struct kvm_memslots *slots;
- slots = kvm_kvzalloc(sizeof(struct kvm_memslots));
+ slots = kvzalloc(sizeof(struct kvm_memslots), GFP_KERNEL);
if (!slots)
return NULL;
@@ -708,18 +708,6 @@ static struct kvm *kvm_create_vm(unsigned long type)
return ERR_PTR(r);
}
-/*
- * Avoid using vmalloc for a small buffer.
- * Should not be used when the size is statically known.
- */
-void *kvm_kvzalloc(unsigned long size)
-{
- if (size > PAGE_SIZE)
- return vzalloc(size);
- else
- return kzalloc(size, GFP_KERNEL);
-}
-
static void kvm_destroy_devices(struct kvm *kvm)
{
struct kvm_device *dev, *tmp;
@@ -801,7 +789,7 @@ static int kvm_create_dirty_bitmap(struct kvm_memory_slot *memslot)
{
unsigned long dirty_bytes = 2 * kvm_dirty_bitmap_bytes(memslot);
- memslot->dirty_bitmap = kvm_kvzalloc(dirty_bytes);
+ memslot->dirty_bitmap = kvzalloc(dirty_bytes, GFP_KERNEL);
if (!memslot->dirty_bitmap)
return -ENOMEM;
@@ -1027,7 +1015,7 @@ int __kvm_set_memory_region(struct kvm *kvm,
goto out_free;
}
- slots = kvm_kvzalloc(sizeof(struct kvm_memslots));
+ slots = kvzalloc(sizeof(struct kvm_memslots), GFP_KERNEL);
if (!slots)
goto out_free;
memcpy(slots, __kvm_memslots(kvm, as_id), sizeof(struct kvm_memslots));