ath10k: populate qca4019 fw specific wmi init params
Some of the parameter like tx/rx chain mask, number of htt tx desc,
qcache active peer count, etc goes via wmi init cmd to qca4019 firmware
are different.
To make use of 10.4 gen_init function for qca4019, change wmi service
ready handler and 10.4 wmi init functions to adapt qca4019 specific
init values.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 7904387..4d31764 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -156,6 +156,11 @@
.channel_counters_freq_hz = 150000,
.max_probe_resp_desc_thres = 24,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+ .num_msdu_desc = 1424,
+ .qcache_active_peers = 50,
+ .tx_chain_mask = 0xf,
+ .rx_chain_mask = 0xf,
+ .max_spatial_stream = 4,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -212,6 +217,11 @@
.channel_counters_freq_hz = 125000,
.max_probe_resp_desc_thres = 24,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+ .num_msdu_desc = 2500,
+ .qcache_active_peers = 35,
+ .tx_chain_mask = 0x3,
+ .rx_chain_mask = 0x3,
+ .max_spatial_stream = 2,
.fw = {
.dir = QCA4019_HW_1_0_FW_DIR,
.fw = QCA4019_HW_1_0_FW_FILE,
@@ -1523,9 +1533,9 @@
ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
- ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
+ ar->htt.max_num_pending_tx = ar->hw_params.num_msdu_desc;
ar->fw_stats_req_mask = WMI_STAT_PEER;
- ar->max_spatial_stream = WMI_10_4_MAX_SPATIAL_STREAM;
+ ar->max_spatial_stream = ar->hw_params.max_spatial_stream;
break;
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 2e411b5..a62b62a 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -680,6 +680,12 @@
/* The padding bytes's location is different on various chips */
enum ath10k_hw_4addr_pad hw_4addr_pad;
+ u32 num_msdu_desc;
+ u32 qcache_active_peers;
+ u32 tx_chain_mask;
+ u32 rx_chain_mask;
+ u32 max_spatial_stream;
+
struct ath10k_hw_params_fw {
const char *dir;
const char *fw;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 291ca1f..2dece8d 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -426,16 +426,11 @@
#define TARGET_10_4_ACTIVE_PEERS 0
#define TARGET_10_4_NUM_QCACHE_PEERS_MAX 512
-#define TARGET_10_4_QCACHE_ACTIVE_PEERS 50
#define TARGET_10_4_NUM_OFFLOAD_PEERS 0
#define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0
#define TARGET_10_4_NUM_PEER_KEYS 2
#define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2)
#define TARGET_10_4_AST_SKID_LIMIT 32
-#define TARGET_10_4_TX_CHAIN_MASK (BIT(0) | BIT(1) | \
- BIT(2) | BIT(3))
-#define TARGET_10_4_RX_CHAIN_MASK (BIT(0) | BIT(1) | \
- BIT(2) | BIT(3))
/* 100 ms for video, best-effort, and background */
#define TARGET_10_4_RX_TIMEOUT_LO_PRI 100
@@ -461,7 +456,6 @@
#define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
#define TARGET_10_4_VOW_CONFIG 0
#define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV 3
-#define TARGET_10_4_NUM_MSDU_DESC (1024 + 400)
#define TARGET_10_4_11AC_TX_MAX_FRAGS 2
#define TARGET_10_4_MAX_PEER_EXT_STATS 16
#define TARGET_10_4_SMART_ANT_CAP 0
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 04799c7..1ce6742 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4618,9 +4618,9 @@
if (test_bit(WMI_SERVICE_PEER_CACHING, ar->wmi.svc_map)) {
ar->max_num_peers = TARGET_10_4_NUM_QCACHE_PEERS_MAX +
- TARGET_10_4_NUM_VDEVS;
- ar->num_active_peers = TARGET_10_4_QCACHE_ACTIVE_PEERS +
- TARGET_10_4_NUM_VDEVS;
+ ar->max_num_vdevs;
+ ar->num_active_peers = ar->hw_params.qcache_active_peers +
+ ar->max_num_vdevs;
ar->num_tids = ar->num_active_peers * 2;
ar->max_num_stations = TARGET_10_4_NUM_QCACHE_PEERS_MAX;
}
@@ -5602,8 +5602,8 @@
__cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS);
config.num_peer_keys = __cpu_to_le32(TARGET_10_4_NUM_PEER_KEYS);
config.ast_skid_limit = __cpu_to_le32(TARGET_10_4_AST_SKID_LIMIT);
- config.tx_chain_mask = __cpu_to_le32(TARGET_10_4_TX_CHAIN_MASK);
- config.rx_chain_mask = __cpu_to_le32(TARGET_10_4_RX_CHAIN_MASK);
+ config.tx_chain_mask = __cpu_to_le32(ar->hw_params.tx_chain_mask);
+ config.rx_chain_mask = __cpu_to_le32(ar->hw_params.rx_chain_mask);
config.rx_timeout_pri[0] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
config.rx_timeout_pri[1] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
@@ -5634,7 +5634,7 @@
config.vow_config = __cpu_to_le32(TARGET_10_4_VOW_CONFIG);
config.gtk_offload_max_vdev =
__cpu_to_le32(TARGET_10_4_GTK_OFFLOAD_MAX_VDEV);
- config.num_msdu_desc = __cpu_to_le32(TARGET_10_4_NUM_MSDU_DESC);
+ config.num_msdu_desc = __cpu_to_le32(ar->htt.max_num_pending_tx);
config.max_frag_entries = __cpu_to_le32(TARGET_10_4_11AC_TX_MAX_FRAGS);
config.max_peer_ext_stats =
__cpu_to_le32(TARGET_10_4_MAX_PEER_EXT_STATS);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 049c618..4d3cbc4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1818,7 +1818,6 @@
#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
#define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
-#define WMI_10_4_MAX_SPATIAL_STREAM 4
/* HT Capabilities*/
#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */