i40e: init code and hardware support
This patch implements the hardware specific init and management.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
CC: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
CC: e1000-devel@lists.sourceforge.net
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e_hmc.c b/drivers/net/ethernet/intel/i40e/i40e_hmc.c
new file mode 100644
index 0000000..901804a
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40e/i40e_hmc.c
@@ -0,0 +1,366 @@
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Driver
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+#include "i40e_osdep.h"
+#include "i40e_register.h"
+#include "i40e_status.h"
+#include "i40e_alloc.h"
+#include "i40e_hmc.h"
+#include "i40e_type.h"
+
+/**
+ * i40e_add_sd_table_entry - Adds a segment descriptor to the table
+ * @hw: pointer to our hw struct
+ * @hmc_info: pointer to the HMC configuration information struct
+ * @sd_index: segment descriptor index to manipulate
+ * @type: what type of segment descriptor we're manipulating
+ * @direct_mode_sz: size to alloc in direct mode
+ **/
+i40e_status i40e_add_sd_table_entry(struct i40e_hw *hw,
+ struct i40e_hmc_info *hmc_info,
+ u32 sd_index,
+ enum i40e_sd_entry_type type,
+ u64 direct_mode_sz)
+{
+ enum i40e_memory_type mem_type __attribute__((unused));
+ i40e_status ret_code = 0;
+ struct i40e_hmc_sd_entry *sd_entry;
+ bool dma_mem_alloc_done = false;
+ struct i40e_dma_mem mem;
+ u64 alloc_len;
+
+ if (NULL == hmc_info->sd_table.sd_entry) {
+ ret_code = I40E_ERR_BAD_PTR;
+ hw_dbg(hw, "i40e_add_sd_table_entry: bad sd_entry\n");
+ goto exit;
+ }
+
+ if (sd_index >= hmc_info->sd_table.sd_cnt) {
+ ret_code = I40E_ERR_INVALID_SD_INDEX;
+ hw_dbg(hw, "i40e_add_sd_table_entry: bad sd_index\n");
+ goto exit;
+ }
+
+ sd_entry = &hmc_info->sd_table.sd_entry[sd_index];
+ if (!sd_entry->valid) {
+ if (I40E_SD_TYPE_PAGED == type) {
+ mem_type = i40e_mem_pd;
+ alloc_len = I40E_HMC_PAGED_BP_SIZE;
+ } else {
+ mem_type = i40e_mem_bp_jumbo;
+ alloc_len = direct_mode_sz;
+ }
+
+ /* allocate a 4K pd page or 2M backing page */
+ ret_code = i40e_allocate_dma_mem(hw, &mem, mem_type, alloc_len,
+ I40E_HMC_PD_BP_BUF_ALIGNMENT);
+ if (ret_code)
+ goto exit;
+ dma_mem_alloc_done = true;
+ if (I40E_SD_TYPE_PAGED == type) {
+ ret_code = i40e_allocate_virt_mem(hw,
+ &sd_entry->u.pd_table.pd_entry_virt_mem,
+ sizeof(struct i40e_hmc_pd_entry) * 512);
+ if (ret_code)
+ goto exit;
+ sd_entry->u.pd_table.pd_entry =
+ (struct i40e_hmc_pd_entry *)
+ sd_entry->u.pd_table.pd_entry_virt_mem.va;
+ memcpy(&sd_entry->u.pd_table.pd_page_addr, &mem,
+ sizeof(struct i40e_dma_mem));
+ } else {
+ memcpy(&sd_entry->u.bp.addr, &mem,
+ sizeof(struct i40e_dma_mem));
+ sd_entry->u.bp.sd_pd_index = sd_index;
+ }
+ /* initialize the sd entry */
+ hmc_info->sd_table.sd_entry[sd_index].entry_type = type;
+
+ /* increment the ref count */
+ I40E_INC_SD_REFCNT(&hmc_info->sd_table);
+ }
+ /* Increment backing page reference count */
+ if (I40E_SD_TYPE_DIRECT == sd_entry->entry_type)
+ I40E_INC_BP_REFCNT(&sd_entry->u.bp);
+exit:
+ if (ret_code)
+ if (dma_mem_alloc_done)
+ i40e_free_dma_mem(hw, &mem);
+
+ return ret_code;
+}
+
+/**
+ * i40e_add_pd_table_entry - Adds page descriptor to the specified table
+ * @hw: pointer to our HW structure
+ * @hmc_info: pointer to the HMC configuration information structure
+ * @pd_index: which page descriptor index to manipulate
+ *
+ * This function:
+ * 1. Initializes the pd entry
+ * 2. Adds pd_entry in the pd_table
+ * 3. Mark the entry valid in i40e_hmc_pd_entry structure
+ * 4. Initializes the pd_entry's ref count to 1
+ * assumptions:
+ * 1. The memory for pd should be pinned down, physically contiguous and
+ * aligned on 4K boundary and zeroed memory.
+ * 2. It should be 4K in size.
+ **/
+i40e_status i40e_add_pd_table_entry(struct i40e_hw *hw,
+ struct i40e_hmc_info *hmc_info,
+ u32 pd_index)
+{
+ i40e_status ret_code = 0;
+ struct i40e_hmc_pd_table *pd_table;
+ struct i40e_hmc_pd_entry *pd_entry;
+ struct i40e_dma_mem mem;
+ u32 sd_idx, rel_pd_idx;
+ u64 *pd_addr;
+ u64 page_desc;
+
+ if (pd_index / I40E_HMC_PD_CNT_IN_SD >= hmc_info->sd_table.sd_cnt) {
+ ret_code = I40E_ERR_INVALID_PAGE_DESC_INDEX;
+ hw_dbg(hw, "i40e_add_pd_table_entry: bad pd_index\n");
+ goto exit;
+ }
+
+ /* find corresponding sd */
+ sd_idx = (pd_index / I40E_HMC_PD_CNT_IN_SD);
+ if (I40E_SD_TYPE_PAGED !=
+ hmc_info->sd_table.sd_entry[sd_idx].entry_type)
+ goto exit;
+
+ rel_pd_idx = (pd_index % I40E_HMC_PD_CNT_IN_SD);
+ pd_table = &hmc_info->sd_table.sd_entry[sd_idx].u.pd_table;
+ pd_entry = &pd_table->pd_entry[rel_pd_idx];
+ if (!pd_entry->valid) {
+ /* allocate a 4K backing page */
+ ret_code = i40e_allocate_dma_mem(hw, &mem, i40e_mem_bp,
+ I40E_HMC_PAGED_BP_SIZE,
+ I40E_HMC_PD_BP_BUF_ALIGNMENT);
+ if (ret_code)
+ goto exit;
+
+ memcpy(&pd_entry->bp.addr, &mem, sizeof(struct i40e_dma_mem));
+ pd_entry->bp.sd_pd_index = pd_index;
+ pd_entry->bp.entry_type = I40E_SD_TYPE_PAGED;
+ /* Set page address and valid bit */
+ page_desc = mem.pa | 0x1;
+
+ pd_addr = (u64 *)pd_table->pd_page_addr.va;
+ pd_addr += rel_pd_idx;
+
+ /* Add the backing page physical address in the pd entry */
+ memcpy(pd_addr, &page_desc, sizeof(u64));
+
+ pd_entry->sd_index = sd_idx;
+ pd_entry->valid = true;
+ I40E_INC_PD_REFCNT(pd_table);
+ }
+ I40E_INC_BP_REFCNT(&pd_entry->bp);
+exit:
+ return ret_code;
+}
+
+/**
+ * i40e_remove_pd_bp - remove a backing page from a page descriptor
+ * @hw: pointer to our HW structure
+ * @hmc_info: pointer to the HMC configuration information structure
+ * @idx: the page index
+ * @is_pf: distinguishes a VF from a PF
+ *
+ * This function:
+ * 1. Marks the entry in pd tabe (for paged address mode) or in sd table
+ * (for direct address mode) invalid.
+ * 2. Write to register PMPDINV to invalidate the backing page in FV cache
+ * 3. Decrement the ref count for the pd _entry
+ * assumptions:
+ * 1. Caller can deallocate the memory used by backing storage after this
+ * function returns.
+ **/
+i40e_status i40e_remove_pd_bp(struct i40e_hw *hw,
+ struct i40e_hmc_info *hmc_info,
+ u32 idx, bool is_pf)
+{
+ i40e_status ret_code = 0;
+ struct i40e_hmc_pd_entry *pd_entry;
+ struct i40e_hmc_pd_table *pd_table;
+ struct i40e_hmc_sd_entry *sd_entry;
+ u32 sd_idx, rel_pd_idx;
+ u64 *pd_addr;
+
+ /* calculate index */
+ sd_idx = idx / I40E_HMC_PD_CNT_IN_SD;
+ rel_pd_idx = idx % I40E_HMC_PD_CNT_IN_SD;
+ if (sd_idx >= hmc_info->sd_table.sd_cnt) {
+ ret_code = I40E_ERR_INVALID_PAGE_DESC_INDEX;
+ hw_dbg(hw, "i40e_remove_pd_bp: bad idx\n");
+ goto exit;
+ }
+ sd_entry = &hmc_info->sd_table.sd_entry[sd_idx];
+ if (I40E_SD_TYPE_PAGED != sd_entry->entry_type) {
+ ret_code = I40E_ERR_INVALID_SD_TYPE;
+ hw_dbg(hw, "i40e_remove_pd_bp: wrong sd_entry type\n");
+ goto exit;
+ }
+ /* get the entry and decrease its ref counter */
+ pd_table = &hmc_info->sd_table.sd_entry[sd_idx].u.pd_table;
+ pd_entry = &pd_table->pd_entry[rel_pd_idx];
+ I40E_DEC_BP_REFCNT(&pd_entry->bp);
+ if (pd_entry->bp.ref_cnt)
+ goto exit;
+
+ /* mark the entry invalid */
+ pd_entry->valid = false;
+ I40E_DEC_PD_REFCNT(pd_table);
+ pd_addr = (u64 *)pd_table->pd_page_addr.va;
+ pd_addr += rel_pd_idx;
+ memset(pd_addr, 0, sizeof(u64));
+ if (is_pf)
+ I40E_INVALIDATE_PF_HMC_PD(hw, sd_idx, idx);
+ else
+ I40E_INVALIDATE_VF_HMC_PD(hw, sd_idx, idx, hmc_info->hmc_fn_id);
+
+ /* free memory here */
+ ret_code = i40e_free_dma_mem(hw, &(pd_entry->bp.addr));
+ if (ret_code)
+ goto exit;
+ if (!pd_table->ref_cnt)
+ i40e_free_virt_mem(hw, &pd_table->pd_entry_virt_mem);
+exit:
+ return ret_code;
+}
+
+/**
+ * i40e_prep_remove_sd_bp - Prepares to remove a backing page from a sd entry
+ * @hmc_info: pointer to the HMC configuration information structure
+ * @idx: the page index
+ **/
+i40e_status i40e_prep_remove_sd_bp(struct i40e_hmc_info *hmc_info,
+ u32 idx)
+{
+ i40e_status ret_code = 0;
+ struct i40e_hmc_sd_entry *sd_entry;
+
+ /* get the entry and decrease its ref counter */
+ sd_entry = &hmc_info->sd_table.sd_entry[idx];
+ I40E_DEC_BP_REFCNT(&sd_entry->u.bp);
+ if (sd_entry->u.bp.ref_cnt) {
+ ret_code = I40E_ERR_NOT_READY;
+ goto exit;
+ }
+ I40E_DEC_SD_REFCNT(&hmc_info->sd_table);
+
+ /* mark the entry invalid */
+ sd_entry->valid = false;
+exit:
+ return ret_code;
+}
+
+/**
+ * i40e_remove_sd_bp_new - Removes a backing page from a segment descriptor
+ * @hw: pointer to our hw struct
+ * @hmc_info: pointer to the HMC configuration information structure
+ * @idx: the page index
+ * @is_pf: used to distinguish between VF and PF
+ **/
+i40e_status i40e_remove_sd_bp_new(struct i40e_hw *hw,
+ struct i40e_hmc_info *hmc_info,
+ u32 idx, bool is_pf)
+{
+ struct i40e_hmc_sd_entry *sd_entry;
+ i40e_status ret_code = 0;
+
+ /* get the entry and decrease its ref counter */
+ sd_entry = &hmc_info->sd_table.sd_entry[idx];
+ if (is_pf) {
+ I40E_CLEAR_PF_SD_ENTRY(hw, idx, I40E_SD_TYPE_DIRECT);
+ } else {
+ ret_code = I40E_NOT_SUPPORTED;
+ goto exit;
+ }
+ ret_code = i40e_free_dma_mem(hw, &(sd_entry->u.bp.addr));
+ if (ret_code)
+ goto exit;
+exit:
+ return ret_code;
+}
+
+/**
+ * i40e_prep_remove_pd_page - Prepares to remove a PD page from sd entry.
+ * @hmc_info: pointer to the HMC configuration information structure
+ * @idx: segment descriptor index to find the relevant page descriptor
+ **/
+i40e_status i40e_prep_remove_pd_page(struct i40e_hmc_info *hmc_info,
+ u32 idx)
+{
+ i40e_status ret_code = 0;
+ struct i40e_hmc_sd_entry *sd_entry;
+
+ sd_entry = &hmc_info->sd_table.sd_entry[idx];
+
+ if (sd_entry->u.pd_table.ref_cnt) {
+ ret_code = I40E_ERR_NOT_READY;
+ goto exit;
+ }
+
+ /* mark the entry invalid */
+ sd_entry->valid = false;
+
+ I40E_DEC_SD_REFCNT(&hmc_info->sd_table);
+exit:
+ return ret_code;
+}
+
+/**
+ * i40e_remove_pd_page_new - Removes a PD page from sd entry.
+ * @hw: pointer to our hw struct
+ * @hmc_info: pointer to the HMC configuration information structure
+ * @idx: segment descriptor index to find the relevant page descriptor
+ * @is_pf: used to distinguish between VF and PF
+ **/
+i40e_status i40e_remove_pd_page_new(struct i40e_hw *hw,
+ struct i40e_hmc_info *hmc_info,
+ u32 idx, bool is_pf)
+{
+ i40e_status ret_code = 0;
+ struct i40e_hmc_sd_entry *sd_entry;
+
+ sd_entry = &hmc_info->sd_table.sd_entry[idx];
+ if (is_pf) {
+ I40E_CLEAR_PF_SD_ENTRY(hw, idx, I40E_SD_TYPE_PAGED);
+ } else {
+ ret_code = I40E_NOT_SUPPORTED;
+ goto exit;
+ }
+ /* free memory here */
+ ret_code = i40e_free_dma_mem(hw, &(sd_entry->u.pd_table.pd_page_addr));
+ if (ret_code)
+ goto exit;
+exit:
+ return ret_code;
+}