cfg80211: remove enum ieee80211_band
This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/rs.c b/drivers/net/wireless/intel/iwlwifi/dvm/rs.c
index ee75055..b95c2d7 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/rs.c
@@ -599,7 +599,7 @@
* fill "search" or "active" tx mode table.
*/
static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
- enum ieee80211_band band,
+ enum nl80211_band band,
struct iwl_scale_tbl_info *tbl,
int *rate_idx)
{
@@ -624,7 +624,7 @@
/* legacy rate format */
if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
if (num_of_ant == 1) {
- if (band == IEEE80211_BAND_5GHZ)
+ if (band == NL80211_BAND_5GHZ)
tbl->lq_type = LQ_A;
else
tbl->lq_type = LQ_G;
@@ -802,7 +802,7 @@
if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
switch_to_legacy = 1;
scale_index = rs_ht_to_legacy[scale_index];
- if (lq_sta->band == IEEE80211_BAND_5GHZ)
+ if (lq_sta->band == NL80211_BAND_5GHZ)
tbl->lq_type = LQ_A;
else
tbl->lq_type = LQ_G;
@@ -821,7 +821,7 @@
/* Mask with station rate restriction */
if (is_legacy(tbl->lq_type)) {
/* supp_rates has no CCK bits in A mode */
- if (lq_sta->band == IEEE80211_BAND_5GHZ)
+ if (lq_sta->band == NL80211_BAND_5GHZ)
rate_mask = (u16)(rate_mask &
(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
else
@@ -939,7 +939,7 @@
table = &lq_sta->lq;
tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
- if (priv->band == IEEE80211_BAND_5GHZ)
+ if (priv->band == NL80211_BAND_5GHZ)
rs_index -= IWL_FIRST_OFDM_RATE;
mac_flags = info->status.rates[0].flags;
mac_index = info->status.rates[0].idx;
@@ -952,7 +952,7 @@
* mac80211 HT index is always zero-indexed; we need to move
* HT OFDM rates after CCK rates in 2.4 GHz band
*/
- if (priv->band == IEEE80211_BAND_2GHZ)
+ if (priv->band == NL80211_BAND_2GHZ)
mac_index += IWL_FIRST_OFDM_RATE;
}
/* Here we actually compare this rate to the latest LQ command */
@@ -2284,7 +2284,7 @@
/* mask with station rate restriction */
if (is_legacy(tbl->lq_type)) {
- if (lq_sta->band == IEEE80211_BAND_5GHZ)
+ if (lq_sta->band == NL80211_BAND_5GHZ)
/* supp_rates has no CCK bits in A mode */
rate_scale_index_msk = (u16) (rate_mask &
(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
@@ -2721,7 +2721,7 @@
/* Get max rate if user set max rate */
if (lq_sta) {
lq_sta->max_rate_idx = txrc->max_rate_idx;
- if ((sband->band == IEEE80211_BAND_5GHZ) &&
+ if ((sband->band == NL80211_BAND_5GHZ) &&
(lq_sta->max_rate_idx != -1))
lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE;
if ((lq_sta->max_rate_idx < 0) ||
@@ -2763,11 +2763,11 @@
} else {
/* Check for invalid rates */
if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) ||
- ((sband->band == IEEE80211_BAND_5GHZ) &&
+ ((sband->band == NL80211_BAND_5GHZ) &&
(rate_idx < IWL_FIRST_OFDM_RATE)))
rate_idx = rate_lowest_index(sband, sta);
/* On valid 5 GHz rate, adjust index */
- else if (sband->band == IEEE80211_BAND_5GHZ)
+ else if (sband->band == NL80211_BAND_5GHZ)
rate_idx -= IWL_FIRST_OFDM_RATE;
info->control.rates[0].flags = 0;
}
@@ -2880,7 +2880,7 @@
/* Set last_txrate_idx to lowest rate */
lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
- if (sband->band == IEEE80211_BAND_5GHZ)
+ if (sband->band == NL80211_BAND_5GHZ)
lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
lq_sta->is_agg = 0;
#ifdef CONFIG_MAC80211_DEBUGFS